summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/ich8lan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/ich8lan.c')
-rw-r--r--drivers/net/e1000e/ich8lan.c152
1 files changed, 75 insertions, 77 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 448e12378dbc..61f89275d7c3 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -815,11 +815,16 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
{
+ struct e1000_adapter *adapter = hw->adapter;
struct e1000_phy_info *phy = &hw->phy;
u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
- s32 ret_val;
+ s32 ret_val = 0;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
+ if (!(hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) &&
+ !(hw->mac.type == e1000_pchlan))
+ return ret_val;
+
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
@@ -831,97 +836,90 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
* Therefore, after each PHY reset, we will load the
* configuration data out of the NVM manually.
*/
- if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) ||
- (hw->mac.type == e1000_pchlan)) {
- struct e1000_adapter *adapter = hw->adapter;
-
- /* Check if SW needs to configure the PHY */
- if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
- (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
- (hw->mac.type == e1000_pchlan))
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
- else
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+ if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
+ (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
+ (hw->mac.type == e1000_pchlan))
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+ else
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
- data = er32(FEXTNVM);
- if (!(data & sw_cfg_mask))
- goto out;
+ data = er32(FEXTNVM);
+ if (!(data & sw_cfg_mask))
+ goto out;
- /* Wait for basic configuration completes before proceeding */
- e1000_lan_init_done_ich8lan(hw);
+ /* Wait for basic configuration completes before proceeding */
+ e1000_lan_init_done_ich8lan(hw);
+ /*
+ * Make sure HW does not configure LCD from PHY
+ * extended configuration before SW configuration
+ */
+ data = er32(EXTCNF_CTRL);
+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ goto out;
+
+ cnf_size = er32(EXTCNF_SIZE);
+ cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+ cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+ if (!cnf_size)
+ goto out;
+
+ cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+ cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+ if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+ (hw->mac.type == e1000_pchlan)) {
/*
- * Make sure HW does not configure LCD from PHY
- * extended configuration before SW configuration
+ * HW configures the SMBus address and LEDs when the
+ * OEM and LCD Write Enable bits are set in the NVM.
+ * When both NVM bits are cleared, SW will configure
+ * them instead.
*/
- data = er32(EXTCNF_CTRL);
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ data = er32(STRAP);
+ data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+ reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
+ reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
+ reg_data);
+ if (ret_val)
goto out;
- cnf_size = er32(EXTCNF_SIZE);
- cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
- cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
- if (!cnf_size)
+ data = er32(LEDCTL);
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
+ (u16)data);
+ if (ret_val)
goto out;
+ }
- cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
- cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
-
- if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
- (hw->mac.type == e1000_pchlan)) {
- /*
- * HW configures the SMBus address and LEDs when the
- * OEM and LCD Write Enable bits are set in the NVM.
- * When both NVM bits are cleared, SW will configure
- * them instead.
- */
- data = er32(STRAP);
- data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
- reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
- reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
- ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
- reg_data);
- if (ret_val)
- goto out;
-
- data = er32(LEDCTL);
- ret_val = e1000_write_phy_reg_hv_locked(hw,
- HV_LED_CONFIG,
- (u16)data);
- if (ret_val)
- goto out;
- }
- /* Configure LCD from extended configuration region. */
+ /* Configure LCD from extended configuration region. */
- /* cnf_base_addr is in DWORD */
- word_addr = (u16)(cnf_base_addr << 1);
+ /* cnf_base_addr is in DWORD */
+ word_addr = (u16)(cnf_base_addr << 1);
- for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
- &reg_data);
- if (ret_val)
- goto out;
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+ &reg_data);
+ if (ret_val)
+ goto out;
- ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
- 1, &reg_addr);
- if (ret_val)
- goto out;
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+ 1, &reg_addr);
+ if (ret_val)
+ goto out;
- /* Save off the PHY page for future writes. */
- if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
- phy_page = reg_data;
- continue;
- }
+ /* Save off the PHY page for future writes. */
+ if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+ phy_page = reg_data;
+ continue;
+ }
- reg_addr &= PHY_REG_MASK;
- reg_addr |= phy_page;
+ reg_addr &= PHY_REG_MASK;
+ reg_addr |= phy_page;
- ret_val = phy->ops.write_reg_locked(hw,
- (u32)reg_addr,
- reg_data);
- if (ret_val)
- goto out;
- }
+ ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr,
+ reg_data);
+ if (ret_val)
+ goto out;
}
out:
OpenPOWER on IntegriCloud