summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000/e1000_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000/e1000_main.c')
-rw-r--r--drivers/net/e1000/e1000_main.c41
1 files changed, 28 insertions, 13 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index fa849831d099..8d04752777a8 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -35,7 +35,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "7.2.9-k2"DRIVERNAPI
+#define DRV_VERSION "7.2.9-k4"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
@@ -699,7 +699,10 @@ e1000_reset(struct e1000_adapter *adapter)
phy_data);
}
- if ((adapter->en_mng_pt) && (adapter->hw.mac_type < e1000_82571)) {
+ if ((adapter->en_mng_pt) &&
+ (adapter->hw.mac_type >= e1000_82540) &&
+ (adapter->hw.mac_type < e1000_82571) &&
+ (adapter->hw.media_type == e1000_media_type_copper)) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
E1000_WRITE_REG(&adapter->hw, MANC, manc);
@@ -1076,8 +1079,9 @@ e1000_remove(struct pci_dev *pdev)
flush_scheduled_work();
- if (adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type < e1000_82571 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
@@ -1804,9 +1808,11 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
* followed by the page buffers. Therefore, skb->data is
* sized to hold the largest protocol header.
*/
+ /* allocations using alloc_page take too long for regular MTU
+ * so only enable packet split for jumbo frames */
pages = PAGE_USE_COUNT(adapter->netdev->mtu);
- if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) &&
- PAGE_SIZE <= 16384)
+ if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
+ PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
adapter->rx_ps_pages = pages;
else
adapter->rx_ps_pages = 0;
@@ -2986,6 +2992,11 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
return NETDEV_TX_OK;
}
+ /* 82571 and newer doesn't need the workaround that limited descriptor
+ * length to 4kB */
+ if (adapter->hw.mac_type >= e1000_82571)
+ max_per_txd = 8192;
+
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->gso_size;
/* The controller does a simple calculation to
@@ -3775,9 +3786,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->length);
- /* adjust length to remove Ethernet CRC */
- length -= 4;
-
if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
@@ -3805,6 +3813,10 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
}
}
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
/* code added for copybreak, this should improve
* performance for small packets with large amounts
* of reassembly being done in the stack */
@@ -4773,8 +4785,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- if (adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type < e1000_82571 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
@@ -4825,8 +4838,9 @@ e1000_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
- if (adapter->hw.mac_type < e1000_82571 &&
- adapter->hw.media_type == e1000_media_type_copper) {
+ if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type < e1000_82571 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
E1000_WRITE_REG(&adapter->hw, MANC, manc);
@@ -4944,6 +4958,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
netif_device_attach(netdev);
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type < e1000_82571 &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
OpenPOWER on IntegriCloud