diff options
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.c | 219 |
1 files changed, 186 insertions, 33 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 045f5426ab9a..7d627dd89a3d 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -83,14 +83,14 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = static const uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = - { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, - 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, - 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, - 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, - 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, - 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, - 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, - 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, + 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, + 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, + 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, + 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, + 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, + 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, + 104, 109, 114, 118, 121, 124}; /****************************************************************************** @@ -286,7 +286,6 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: - case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -305,8 +304,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82571EB_COPPER: + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82571EB_SERDES: + hw->mac_type = e1000_82571; + break; + case E1000_DEV_ID_82572EI_COPPER: + case E1000_DEV_ID_82572EI_FIBER: + case E1000_DEV_ID_82572EI_SERDES: + hw->mac_type = e1000_82572; + break; case E1000_DEV_ID_82573E: case E1000_DEV_ID_82573E_IAMT: + case E1000_DEV_ID_82573L: hw->mac_type = e1000_82573; break; default: @@ -315,6 +325,8 @@ e1000_set_mac_type(struct e1000_hw *hw) } switch(hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: hw->eeprom_semaphore_present = TRUE; /* fall through */ @@ -351,6 +363,8 @@ e1000_set_media_type(struct e1000_hw *hw) switch (hw->device_id) { case E1000_DEV_ID_82545GM_SERDES: case E1000_DEV_ID_82546GB_SERDES: + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82572EI_SERDES: hw->media_type = e1000_media_type_internal_serdes; break; default: @@ -523,6 +537,8 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); /* fall through */ + case e1000_82571: + case e1000_82572: ret_val = e1000_get_auto_rd_done(hw); if(ret_val) /* We don't want to continue accessing MAC registers. */ @@ -683,6 +699,9 @@ e1000_init_hw(struct e1000_hw *hw) switch (hw->mac_type) { default: break; + case e1000_82571: + case e1000_82572: + ctrl |= (1 << 22); case e1000_82573: ctrl |= E1000_TXDCTL_COUNT_DESC; break; @@ -694,6 +713,25 @@ e1000_init_hw(struct e1000_hw *hw) e1000_enable_tx_pkt_filtering(hw); } + switch (hw->mac_type) { + default: + break; + case e1000_82571: + ctrl = E1000_READ_REG(hw, TXDCTL1); + ctrl &= ~E1000_TXDCTL_WTHRESH; + ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB; + ctrl |= (1 << 22); + E1000_WRITE_REG(hw, TXDCTL1, ctrl); + break; + } + + + + if (hw->mac_type == e1000_82573) { + uint32_t gcr = E1000_READ_REG(hw, GCR); + gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + E1000_WRITE_REG(hw, GCR, gcr); + } /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link @@ -878,6 +916,14 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_fiber_serdes_link"); + /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists + * until explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) + E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); + /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -2943,6 +2989,8 @@ e1000_phy_reset(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_82541_rev_2: + case e1000_82571: + case e1000_82572: ret_val = e1000_phy_hw_reset(hw); if(ret_val) return ret_val; @@ -2981,6 +3029,16 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + /* The 82571 firmware may still be configuring the PHY. In this + * case, we cannot access the PHY until the configuration is done. So + * we explicitly set the PHY values. */ + if(hw->mac_type == e1000_82571 || + hw->mac_type == e1000_82572) { + hw->phy_id = IGP01E1000_I_PHY_ID; + hw->phy_type = e1000_phy_igp_2; + return E1000_SUCCESS; + } + /* Read the PHY ID Registers to identify which PHY is onboard. */ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); if(ret_val) @@ -3334,6 +3392,21 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eerd = FALSE; eeprom->use_eewr = FALSE; break; + case e1000_82571: + case e1000_82572: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; case e1000_82573: eeprom->type = e1000_eeprom_spi; eeprom->opcode_bits = 8; @@ -3543,25 +3616,26 @@ e1000_acquire_eeprom(struct e1000_hw *hw) eecd = E1000_READ_REG(hw, EECD); if (hw->mac_type != e1000_82573) { - /* Request EEPROM Access */ - if(hw->mac_type > e1000_82544) { - eecd |= E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); - eecd = E1000_READ_REG(hw, EECD); - while((!(eecd & E1000_EECD_GNT)) && - (i < E1000_EEPROM_GRANT_ATTEMPTS)) { - i++; - udelay(5); - eecd = E1000_READ_REG(hw, EECD); - } - if(!(eecd & E1000_EECD_GNT)) { - eecd &= ~E1000_EECD_REQ; + /* Request EEPROM Access */ + if(hw->mac_type > e1000_82544) { + eecd |= E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); - DEBUGOUT("Could not acquire EEPROM grant\n"); - return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + while((!(eecd & E1000_EECD_GNT)) && + (i < E1000_EEPROM_GRANT_ATTEMPTS)) { + i++; + udelay(5); + eecd = E1000_READ_REG(hw, EECD); + } + if(!(eecd & E1000_EECD_GNT)) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, EECD, eecd); + DEBUGOUT("Could not acquire EEPROM grant\n"); + e1000_put_hw_eeprom_semaphore(hw); + return -E1000_ERR_EEPROM; + } } } - } /* Setup EEPROM for Read/Write */ @@ -4064,7 +4138,7 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* 82573 reads only through eerd */ + /* 82573 writes only through eewr */ if(eeprom->use_eewr == TRUE) return e1000_write_eeprom_eewr(hw, offset, words, data); @@ -4353,9 +4427,16 @@ e1000_read_mac_addr(struct e1000_hw * hw) hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF); hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8); } - if(((hw->mac_type == e1000_82546) || (hw->mac_type == e1000_82546_rev_3)) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) + switch (hw->mac_type) { + default: + break; + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82571: + if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) hw->perm_mac_addr[5] ^= 0x01; + break; + } for(i = 0; i < NODE_ADDRESS_SIZE; i++) hw->mac_addr[i] = hw->perm_mac_addr[i]; @@ -4385,6 +4466,12 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); rar_num = E1000_RAR_ENTRIES; + + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + rar_num -= 1; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); for(i = 1; i < rar_num; i++) { @@ -4427,6 +4514,12 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); num_rar_entry = E1000_RAR_ENTRIES; + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + num_rar_entry -= 1; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -4984,7 +5077,6 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, ICTXQEC); temp = E1000_READ_REG(hw, ICTXQMTC); temp = E1000_READ_REG(hw, ICRXDMTC); - } /****************************************************************************** @@ -5151,6 +5243,8 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: + case e1000_82572: case e1000_82573: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; @@ -5250,6 +5344,7 @@ e1000_get_cable_length(struct e1000_hw *hw, int32_t ret_val; uint16_t agc_value = 0; uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + uint16_t max_agc = 0; uint16_t i, phy_data; uint16_t cable_length; @@ -5338,6 +5433,40 @@ e1000_get_cable_length(struct e1000_hw *hw, IGP01E1000_AGC_RANGE) : 0; *max_length = e1000_igp_cable_length_table[agc_value] + IGP01E1000_AGC_RANGE; + } else if (hw->phy_type == e1000_phy_igp_2) { + uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = + {IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D}; + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of course and + * fine gain values. The result is a number that can be put into + * the lookup table to obtain the approximate cable length. */ + cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc]) + min_agc = cur_agc; + if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc]) + max_agc = cur_agc; + + agc_value += e1000_igp_2_cable_length_table[cur_agc]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0; + *max_length = agc_value + IGP02E1000_AGC_RANGE; } return E1000_SUCCESS; @@ -6465,6 +6594,8 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) default: msec_delay(5); break; + case e1000_82571: + case e1000_82572: case e1000_82573: while(timeout) { if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; @@ -6494,10 +6625,31 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw) { + int32_t timeout = PHY_CFG_TIMEOUT; + uint32_t cfg_mask = E1000_EEPROM_CFG_DONE; + DEBUGFUNC("e1000_get_phy_cfg_done"); - /* Simply wait for 10ms */ - msec_delay(10); + switch (hw->mac_type) { + default: + msec_delay(10); + break; + case e1000_82571: + case e1000_82572: + while (timeout) { + if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) + break; + else + msec_delay(1); + timeout--; + } + + if (!timeout) { + DEBUGOUT("MNG configuration cycle has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } return E1000_SUCCESS; } @@ -6569,8 +6721,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) return; swsm = E1000_READ_REG(hw, SWSM); - /* Release both semaphores. */ - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); } @@ -6606,6 +6757,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * if this is the case. We read FWSM to determine the manageability mode. */ switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: fwsm = E1000_READ_REG(hw, FWSM); if((fwsm & E1000_FWSM_MODE_MASK) != 0) |
