diff options
Diffstat (limited to 'drivers/net/e100.c')
-rw-r--r-- | drivers/net/e100.c | 190 |
1 files changed, 101 insertions, 89 deletions
diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 791080303db1..b194bad29ace 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -147,6 +147,8 @@ * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> @@ -175,7 +177,6 @@ #define DRV_VERSION "3.5.24-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" -#define PFX DRV_NAME ": " #define E100_WATCHDOG_PERIOD (2 * HZ) #define E100_NAPI_WEIGHT 16 @@ -201,10 +202,6 @@ module_param(use_io, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums"); MODULE_PARM_DESC(use_io, "Force use of i/o access mode"); -#define DPRINTK(nlevel, klevel, fmt, args...) \ - (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \ - printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \ - __func__ , ## args)) #define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\ PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \ @@ -690,12 +687,13 @@ static int e100_self_test(struct nic *nic) /* Check results of self-test */ if (nic->mem->selftest.result != 0) { - DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n", - nic->mem->selftest.result); + netif_err(nic, hw, nic->netdev, + "Self-test failed: result=0x%08X\n", + nic->mem->selftest.result); return -ETIMEDOUT; } if (nic->mem->selftest.signature == 0) { - DPRINTK(HW, ERR, "Self-test failed: timed out\n"); + netif_err(nic, hw, nic->netdev, "Self-test failed: timed out\n"); return -ETIMEDOUT; } @@ -798,7 +796,7 @@ static int e100_eeprom_load(struct nic *nic) /* The checksum, stored in the last word, is calculated such that * the sum of words should be 0xBABA */ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) { - DPRINTK(PROBE, ERR, "EEPROM corrupted\n"); + netif_err(nic, probe, nic->netdev, "EEPROM corrupted\n"); if (!eeprom_bad_csum_allow) return -EAGAIN; } @@ -954,8 +952,7 @@ static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) udelay(20); } if (unlikely(!i)) { - printk("e100.mdio_ctrl(%s) won't go Ready\n", - nic->netdev->name ); + netdev_err(nic->netdev, "e100.mdio_ctrl won't go Ready\n"); spin_unlock_irqrestore(&nic->mdio_lock, flags); return 0; /* No way to indicate timeout error */ } @@ -967,9 +964,10 @@ static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) break; } spin_unlock_irqrestore(&nic->mdio_lock, flags); - DPRINTK(HW, DEBUG, - "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n", - dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n", + dir == mdi_read ? "READ" : "WRITE", + addr, reg, data, data_out); return (u16)data_out; } @@ -1029,17 +1027,19 @@ static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic, return ADVERTISE_10HALF | ADVERTISE_10FULL; default: - DPRINTK(HW, DEBUG, - "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", - dir == mdi_read ? "READ" : "WRITE", addr, reg, data); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", + dir == mdi_read ? "READ" : "WRITE", + addr, reg, data); return 0xFFFF; } } else { switch (reg) { default: - DPRINTK(HW, DEBUG, - "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", - dir == mdi_read ? "READ" : "WRITE", addr, reg, data); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n", + dir == mdi_read ? "READ" : "WRITE", + addr, reg, data); return 0xFFFF; } } @@ -1156,12 +1156,15 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) } } - DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]); - DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]); - DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", - c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", + c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } /************************************************************************* @@ -1254,16 +1257,18 @@ static const struct firmware *e100_request_firmware(struct nic *nic) err = request_firmware(&fw, fw_name, &nic->pdev->dev); if (err) { - DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n", - fw_name, err); + netif_err(nic, probe, nic->netdev, + "Failed to load firmware \"%s\": %d\n", + fw_name, err); return ERR_PTR(err); } /* Firmware should be precisely UCODE_SIZE (words) plus three bytes indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */ if (fw->size != UCODE_SIZE * 4 + 3) { - DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n", - fw_name, fw->size); + netif_err(nic, probe, nic->netdev, + "Firmware \"%s\" has wrong size %zu\n", + fw_name, fw->size); release_firmware(fw); return ERR_PTR(-EINVAL); } @@ -1275,9 +1280,9 @@ static const struct firmware *e100_request_firmware(struct nic *nic) if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE || min_size >= UCODE_SIZE) { - DPRINTK(PROBE, ERR, - "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n", - fw_name, timer, bundle, min_size); + netif_err(nic, probe, nic->netdev, + "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n", + fw_name, timer, bundle, min_size); release_firmware(fw); return ERR_PTR(-EINVAL); } @@ -1329,7 +1334,8 @@ static inline int e100_load_ucode_wait(struct nic *nic) return PTR_ERR(fw); if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode))) - DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err); + netif_err(nic, probe, nic->netdev, + "ucode cmd failed with error %d\n", err); /* must restart cuc */ nic->cuc_cmd = cuc_start; @@ -1349,7 +1355,7 @@ static inline int e100_load_ucode_wait(struct nic *nic) /* if the command failed, or is not OK, notify and return */ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) { - DPRINTK(PROBE,ERR, "ucode load failed\n"); + netif_err(nic, probe, nic->netdev, "ucode load failed\n"); err = -EPERM; } @@ -1387,8 +1393,8 @@ static int e100_phy_check_without_mii(struct nic *nic) * media is sensed automatically based on how the link partner * is configured. This is, in essence, manual configuration. */ - DPRINTK(PROBE, INFO, - "found MII-less i82503 or 80c24 or other PHY\n"); + netif_info(nic, probe, nic->netdev, + "found MII-less i82503 or 80c24 or other PHY\n"); nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated; nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */ @@ -1435,18 +1441,20 @@ static int e100_phy_init(struct nic *nic) return 0; /* simply return and hope for the best */ else { /* for unknown cases log a fatal error */ - DPRINTK(HW, ERR, - "Failed to locate any known PHY, aborting.\n"); + netif_err(nic, hw, nic->netdev, + "Failed to locate any known PHY, aborting\n"); return -EAGAIN; } } else - DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "phy_addr = %d\n", nic->mii.phy_id); /* Get phy ID */ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); nic->phy = (u32)id_hi << 16 | (u32)id_lo; - DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "phy ID = 0x%08X\n", nic->phy); /* Select the phy and isolate the rest */ for (addr = 0; addr < 32; addr++) { @@ -1508,7 +1516,7 @@ static int e100_hw_init(struct nic *nic) e100_hw_reset(nic); - DPRINTK(HW, ERR, "e100_hw_init\n"); + netif_err(nic, hw, nic->netdev, "e100_hw_init\n"); if (!in_interrupt() && (err = e100_self_test(nic))) return err; @@ -1538,16 +1546,16 @@ static int e100_hw_init(struct nic *nic) static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) { struct net_device *netdev = nic->netdev; - struct dev_mc_list *list; + struct netdev_hw_addr *ha; u16 i, count = min(netdev_mc_count(netdev), E100_MAX_MULTICAST_ADDRS); cb->command = cpu_to_le16(cb_multi); cb->u.multi.count = cpu_to_le16(count * ETH_ALEN); i = 0; - netdev_for_each_mc_addr(list, netdev) { + netdev_for_each_mc_addr(ha, netdev) { if (i == count) break; - memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &list->dmi_addr, + memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr, ETH_ALEN); } } @@ -1556,8 +1564,9 @@ static void e100_set_multicast_list(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); - DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n", - netdev_mc_count(netdev), netdev->flags); + netif_printk(nic, hw, KERN_DEBUG, nic->netdev, + "mc_count=%d, flags=0x%04X\n", + netdev_mc_count(netdev), netdev->flags); if (netdev->flags & IFF_PROMISC) nic->flags |= promiscuous; @@ -1630,7 +1639,8 @@ static void e100_update_stats(struct nic *nic) if (e100_exec_cmd(nic, cuc_dump_reset, 0)) - DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n"); + netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, + "exec cuc_dump_reset failed\n"); } static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex) @@ -1660,20 +1670,19 @@ static void e100_watchdog(unsigned long data) struct nic *nic = (struct nic *)data; struct ethtool_cmd cmd; - DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies); + netif_printk(nic, timer, KERN_DEBUG, nic->netdev, + "right now = %ld\n", jiffies); /* mii library handles link maintenance tasks */ mii_ethtool_gset(&nic->mii, &cmd); if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) { - printk(KERN_INFO "e100: %s NIC Link is Up %s Mbps %s Duplex\n", - nic->netdev->name, - cmd.speed == SPEED_100 ? "100" : "10", - cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); + netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n", + cmd.speed == SPEED_100 ? 100 : 10, + cmd.duplex == DUPLEX_FULL ? "Full" : "Half"); } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) { - printk(KERN_INFO "e100: %s NIC Link is Down\n", - nic->netdev->name); + netdev_info(nic->netdev, "NIC Link is Down\n"); } mii_check_link(&nic->mii); @@ -1733,7 +1742,8 @@ static netdev_tx_t e100_xmit_frame(struct sk_buff *skb, Issue a NOP command followed by a 1us delay before issuing the Tx command. */ if (e100_exec_cmd(nic, cuc_nop, 0)) - DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n"); + netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, + "exec cuc_nop failed\n"); udelay(1); } @@ -1742,17 +1752,18 @@ static netdev_tx_t e100_xmit_frame(struct sk_buff *skb, switch (err) { case -ENOSPC: /* We queued the skb, but now we're out of space. */ - DPRINTK(TX_ERR, DEBUG, "No space for CB\n"); + netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, + "No space for CB\n"); netif_stop_queue(netdev); break; case -ENOMEM: /* This is a hard error - log it. */ - DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n"); + netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, + "Out of Tx resources, returning skb\n"); netif_stop_queue(netdev); return NETDEV_TX_BUSY; } - netdev->trans_start = jiffies; return NETDEV_TX_OK; } @@ -1768,9 +1779,10 @@ static int e100_tx_clean(struct nic *nic) for (cb = nic->cb_to_clean; cb->status & cpu_to_le16(cb_complete); cb = nic->cb_to_clean = cb->next) { - DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n", - (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)), - cb->status); + netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev, + "cb[%d]->status = 0x%04X\n", + (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)), + cb->status); if (likely(cb->skb != NULL)) { dev->stats.tx_packets++; @@ -1913,7 +1925,8 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); - DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); + netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev, + "status=0x%04X\n", rfd_status); /* If data isn't ready, nothing to indicate */ if (unlikely(!(rfd_status & cb_complete))) { @@ -2124,7 +2137,8 @@ static irqreturn_t e100_intr(int irq, void *dev_id) struct nic *nic = netdev_priv(netdev); u8 stat_ack = ioread8(&nic->csr->scb.stat_ack); - DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack); + netif_printk(nic, intr, KERN_DEBUG, nic->netdev, + "stat_ack = 0x%02X\n", stat_ack); if (stat_ack == stat_ack_not_ours || /* Not our interrupt */ stat_ack == stat_ack_not_present) /* Hardware is ejected */ @@ -2264,8 +2278,8 @@ static void e100_tx_timeout_task(struct work_struct *work) struct nic *nic = container_of(work, struct nic, tx_timeout_task); struct net_device *netdev = nic->netdev; - DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", - ioread8(&nic->csr->scb.status)); + netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev, + "scb.status=0x%02X\n", ioread8(&nic->csr->scb.status)); rtnl_lock(); if (netif_running(netdev)) { @@ -2532,8 +2546,8 @@ static int e100_set_ringparam(struct net_device *netdev, rfds->count = min(rfds->count, rfds->max); cbs->count = max(ring->tx_pending, cbs->min); cbs->count = min(cbs->count, cbs->max); - DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n", - rfds->count, cbs->count); + netif_info(nic, drv, nic->netdev, "Ring Param settings: rx: %d, tx %d\n", + rfds->count, cbs->count); if (netif_running(netdev)) e100_up(nic); @@ -2710,7 +2724,7 @@ static int e100_open(struct net_device *netdev) netif_carrier_off(netdev); if ((err = e100_up(nic))) - DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n"); + netif_err(nic, ifup, nic->netdev, "Cannot open interface, aborting\n"); return err; } @@ -2744,7 +2758,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, if (!(netdev = alloc_etherdev(sizeof(struct nic)))) { if (((1 << debug) - 1) & NETIF_MSG_PROBE) - printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n"); + pr_err("Etherdev alloc failed, aborting\n"); return -ENOMEM; } @@ -2762,35 +2776,34 @@ static int __devinit e100_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, netdev); if ((err = pci_enable_device(pdev))) { - DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Cannot enable PCI device, aborting\n"); goto err_out_free_dev; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - DPRINTK(PROBE, ERR, "Cannot find proper PCI device " - "base address, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Cannot find proper PCI device base address, aborting\n"); err = -ENODEV; goto err_out_disable_pdev; } if ((err = pci_request_regions(pdev, DRV_NAME))) { - DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Cannot obtain PCI resources, aborting\n"); goto err_out_disable_pdev; } if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) { - DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n"); + netif_err(nic, probe, nic->netdev, "No usable DMA configuration, aborting\n"); goto err_out_free_res; } SET_NETDEV_DEV(netdev, &pdev->dev); if (use_io) - DPRINTK(PROBE, INFO, "using i/o access mode\n"); + netif_info(nic, probe, nic->netdev, "using i/o access mode\n"); nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr)); if (!nic->csr) { - DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Cannot map device registers, aborting\n"); err = -ENOMEM; goto err_out_free_res; } @@ -2824,7 +2837,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task); if ((err = e100_alloc(nic))) { - DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Cannot alloc driver memory, aborting\n"); goto err_out_iounmap; } @@ -2837,13 +2850,11 @@ static int __devinit e100_probe(struct pci_dev *pdev, memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); if (!is_valid_ether_addr(netdev->perm_addr)) { if (!eeprom_bad_csum_allow) { - DPRINTK(PROBE, ERR, "Invalid MAC address from " - "EEPROM, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n"); err = -EAGAIN; goto err_out_free; } else { - DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, " - "you MUST configure one.\n"); + netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, you MUST configure one.\n"); } } @@ -2859,7 +2870,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, strcpy(netdev->name, "eth%d"); if ((err = register_netdev(netdev))) { - DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n"); + netif_err(nic, probe, nic->netdev, "Cannot register net device, aborting\n"); goto err_out_free; } nic->cbs_pool = pci_pool_create(netdev->name, @@ -2867,9 +2878,10 @@ static int __devinit e100_probe(struct pci_dev *pdev, nic->params.cbs.max * sizeof(struct cb), sizeof(u32), 0); - DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n", - (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), - pdev->irq, netdev->dev_addr); + netif_info(nic, probe, nic->netdev, + "addr 0x%llx, irq %d, MAC addr %pM\n", + (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), + pdev->irq, netdev->dev_addr); return 0; @@ -3027,7 +3039,7 @@ static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev) struct nic *nic = netdev_priv(netdev); if (pci_enable_device(pdev)) { - printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n"); + pr_err("Cannot re-enable PCI device after reset\n"); return PCI_ERS_RESULT_DISCONNECT; } pci_set_master(pdev); @@ -3086,8 +3098,8 @@ static struct pci_driver e100_driver = { static int __init e100_init_module(void) { if (((1 << debug) - 1) & NETIF_MSG_DRV) { - printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); - printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT); + pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); + pr_info("%s\n", DRV_COPYRIGHT); } return pci_register_driver(&e100_driver); } |