summaryrefslogtreecommitdiffstats
path: root/drivers/net/cxgb3/t3_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/cxgb3/t3_hw.c')
-rw-r--r--drivers/net/cxgb3/t3_hw.c128
1 files changed, 109 insertions, 19 deletions
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index fb485d0a43d8..dd3149d94ba8 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -847,6 +847,64 @@ static int t3_write_flash(struct adapter *adapter, unsigned int addr,
return 0;
}
+/**
+ * t3_check_tpsram_version - read the tp sram version
+ * @adapter: the adapter
+ *
+ * Reads the protocol sram version from serial eeprom.
+ */
+int t3_check_tpsram_version(struct adapter *adapter)
+{
+ int ret;
+ u32 vers;
+ unsigned int major, minor;
+
+ /* Get version loaded in SRAM */
+ t3_write_reg(adapter, A_TP_EMBED_OP_FIELD0, 0);
+ ret = t3_wait_op_done(adapter, A_TP_EMBED_OP_FIELD0,
+ 1, 1, 5, 1);
+ if (ret)
+ return ret;
+
+ vers = t3_read_reg(adapter, A_TP_EMBED_OP_FIELD1);
+
+ major = G_TP_VERSION_MAJOR(vers);
+ minor = G_TP_VERSION_MINOR(vers);
+
+ if (major == TP_VERSION_MAJOR && minor == TP_VERSION_MINOR)
+ return 0;
+
+ return -EINVAL;
+}
+
+/**
+ * t3_check_tpsram - check if provided protocol SRAM
+ * is compatible with this driver
+ * @adapter: the adapter
+ * @tp_sram: the firmware image to write
+ * @size: image size
+ *
+ * Checks if an adapter's tp sram is compatible with the driver.
+ * Returns 0 if the versions are compatible, a negative error otherwise.
+ */
+int t3_check_tpsram(struct adapter *adapter, u8 *tp_sram, unsigned int size)
+{
+ u32 csum;
+ unsigned int i;
+ const u32 *p = (const u32 *)tp_sram;
+
+ /* Verify checksum */
+ for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+ csum += ntohl(p[i]);
+ if (csum != 0xffffffff) {
+ CH_ERR(adapter, "corrupted protocol SRAM image, checksum %u\n",
+ csum);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
enum fw_version_type {
FW_VERSION_N3,
FW_VERSION_T3
@@ -921,7 +979,7 @@ static int t3_flash_erase_sectors(struct adapter *adapter, int start, int end)
/*
* t3_load_fw - download firmware
* @adapter: the adapter
- * @fw_data: the firrware image to write
+ * @fw_data: the firmware image to write
* @size: image size
*
* Write the supplied firmware image to the card's serial flash.
@@ -2362,7 +2420,7 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
F_MTUENABLE | V_WINDOWSCALEMODE(1) |
- V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
+ V_TIMESTAMPSMODE(0) | V_SACKMODE(1) | V_SACKRX(1));
t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
@@ -2371,16 +2429,18 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
F_IPV6ENABLE | F_NICMODE);
t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814);
t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105);
- t3_set_reg_field(adap, A_TP_PARA_REG6,
- adap->params.rev > 0 ? F_ENABLEESND : F_T3A_ENABLEESND,
- 0);
+ t3_set_reg_field(adap, A_TP_PARA_REG6, 0,
+ adap->params.rev > 0 ? F_ENABLEESND :
+ F_T3A_ENABLEESND);
t3_set_reg_field(adap, A_TP_PC_CONFIG,
- F_ENABLEEPCMDAFULL | F_ENABLEOCSPIFULL,
- F_TXDEFERENABLE | F_HEARBEATDACK | F_TXCONGESTIONMODE |
- F_RXCONGESTIONMODE);
+ F_ENABLEEPCMDAFULL,
+ F_ENABLEOCSPIFULL |F_TXDEFERENABLE | F_HEARBEATDACK |
+ F_TXCONGESTIONMODE | F_RXCONGESTIONMODE);
t3_set_reg_field(adap, A_TP_PC_CONFIG2, F_CHDRAFULL, 0);
-
+ t3_write_reg(adap, A_TP_PROXY_FLOW_CNTL, 1080);
+ t3_write_reg(adap, A_TP_PROXY_FLOW_CNTL, 1000);
+
if (adap->params.rev > 0) {
tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE);
t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO,
@@ -2390,9 +2450,10 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
} else
t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED);
- t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0x12121212);
- t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0x12121212);
- t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0x1212);
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0);
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0);
+ t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0);
+ t3_write_reg(adap, A_TP_MOD_RATE_LIMIT, 0xf2200000);
}
/* Desired TP timer resolution in usec */
@@ -2468,6 +2529,7 @@ int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh)
val |= F_RXCOALESCEENABLE;
if (psh)
val |= F_RXCOALESCEPSHEN;
+ size = min(MAX_RX_COALESCING_LEN, size);
t3_write_reg(adap, A_TP_PARA_REG2, V_RXCOALESCESIZE(size) |
V_MAXRXDATA(MAX_RX_COALESCING_LEN));
}
@@ -2496,11 +2558,11 @@ static void __devinit init_mtus(unsigned short mtus[])
* it can accomodate max size TCP/IP headers when SACK and timestamps
* are enabled and still have at least 8 bytes of payload.
*/
- mtus[0] = 88;
- mtus[1] = 256;
- mtus[2] = 512;
- mtus[3] = 576;
- mtus[4] = 808;
+ mtus[1] = 88;
+ mtus[1] = 88;
+ mtus[2] = 256;
+ mtus[3] = 512;
+ mtus[4] = 576;
mtus[5] = 1024;
mtus[6] = 1280;
mtus[7] = 1492;
@@ -2682,6 +2744,34 @@ static void ulp_config(struct adapter *adap, const struct tp_params *p)
t3_write_reg(adap, A_ULPRX_TDDP_TAGMASK, 0xffffffff);
}
+/**
+ * t3_set_proto_sram - set the contents of the protocol sram
+ * @adapter: the adapter
+ * @data: the protocol image
+ *
+ * Write the contents of the protocol SRAM.
+ */
+int t3_set_proto_sram(struct adapter *adap, u8 *data)
+{
+ int i;
+ u32 *buf = (u32 *)data;
+
+ for (i = 0; i < PROTO_SRAM_LINES; i++) {
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD5, cpu_to_be32(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD4, cpu_to_be32(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD3, cpu_to_be32(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD2, cpu_to_be32(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD1, cpu_to_be32(*buf++));
+
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD0, i << 1 | 1 << 31);
+ if (t3_wait_op_done(adap, A_TP_EMBED_OP_FIELD0, 1, 1, 5, 1))
+ return -EIO;
+ }
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD0, 0);
+
+ return 0;
+}
+
void t3_config_trace_filter(struct adapter *adapter,
const struct trace_params *tp, int filter_index,
int invert, int enable)
@@ -2802,7 +2892,7 @@ static void init_hw_for_avail_ports(struct adapter *adap, int nports)
t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0);
t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN |
F_PORT0ACTIVE | F_ENFORCEPKT);
- t3_write_reg(adap, A_PM1_TX_CFG, 0xc000c000);
+ t3_write_reg(adap, A_PM1_TX_CFG, 0xffffffff);
} else {
t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN);
t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB);
@@ -3097,7 +3187,7 @@ int t3_init_hw(struct adapter *adapter, u32 fw_params)
else
t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN);
- t3_write_reg(adapter, A_PM1_RX_CFG, 0xf000f000);
+ t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff);
init_hw_for_avail_ports(adapter, adapter->params.nports);
t3_sge_init(adapter, &adapter->params.sge);
OpenPOWER on IntegriCloud