1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c
new file mode 100644
index 000000000000..73a41e6a5bfc
--- /dev/null
+++ b/drivers/net/cxgb3/ael1002.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+
+enum {
+	AEL100X_TX_DISABLE = 9,
+	AEL100X_TX_CONFIG1 = 0xc002,
+	AEL1002_PWR_DOWN_HI = 0xc011,
+	AEL1002_PWR_DOWN_LO = 0xc012,
+	AEL1002_XFI_EQL = 0xc015,
+	AEL1002_LB_EN = 0xc017,
+
+	LASI_CTRL = 0x9002,
+	LASI_STAT = 0x9005
+};
+
+static void ael100x_txon(struct cphy *phy)
+{
+	int tx_on_gpio = phy->addr == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
+
+	msleep(100);
+	t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio);
+	msleep(30);
+}
+
+static int ael1002_power_down(struct cphy *phy, int enable)
+{
+	int err;
+
+	err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_DISABLE, !!enable);
+	if (!err)
+		err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
+					  BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+	return err;
+}
+
+static int ael1002_reset(struct cphy *phy, int wait)
+{
+	int err;
+
+	if ((err = ael1002_power_down(phy, 0)) ||
+	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_CONFIG1, 1)) ||
+	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_HI, 0)) ||
+	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_LO, 0)) ||
+	    (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_XFI_EQL, 0x18)) ||
+	    (err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL1002_LB_EN,
+				       0, 1 << 5)))
+		return err;
+	return 0;
+}
+
+static int ael1002_intr_noop(struct cphy *phy)
+{
+	return 0;
+}
+
+static int ael100x_get_link_status(struct cphy *phy, int *link_ok,
+				   int *speed, int *duplex, int *fc)
+{
+	if (link_ok) {
+		unsigned int status;
+		int err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &status);
+
+		/*
+		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+		 * once more to get the current link state.
+		 */
+		if (!err && !(status & BMSR_LSTATUS))
+			err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR,
+					&status);
+		if (err)
+			return err;
+		*link_ok = !!(status & BMSR_LSTATUS);
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	return 0;
+}
+
+static struct cphy_ops ael1002_ops = {
+	.reset = ael1002_reset,
+	.intr_enable = ael1002_intr_noop,
+	.intr_disable = ael1002_intr_noop,
+	.intr_clear = ael1002_intr_noop,
+	.intr_handler = ael1002_intr_noop,
+	.get_link_status = ael100x_get_link_status,
+	.power_down = ael1002_power_down,
+};
+
+void t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
+			 int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops);
+	ael100x_txon(phy);
+}
+
+static int ael1006_reset(struct cphy *phy, int wait)
+{
+	return t3_phy_reset(phy, MDIO_DEV_PMA_PMD, wait);
+}
+
+static int ael1006_intr_enable(struct cphy *phy)
+{
+	return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1);
+}
+
+static int ael1006_intr_disable(struct cphy *phy)
+{
+	return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0);
+}
+
+static int ael1006_intr_clear(struct cphy *phy)
+{
+	u32 val;
+
+	return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val);
+}
+
+static int ael1006_intr_handler(struct cphy *phy)
+{
+	unsigned int status;
+	int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status);
+
+	if (err)
+		return err;
+	return (status & 1) ? cphy_cause_link_change : 0;
+}
+
+static int ael1006_power_down(struct cphy *phy, int enable)
+{
+	return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
+				   BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+}
+
+static struct cphy_ops ael1006_ops = {
+	.reset = ael1006_reset,
+	.intr_enable = ael1006_intr_enable,
+	.intr_disable = ael1006_intr_disable,
+	.intr_clear = ael1006_intr_clear,
+	.intr_handler = ael1006_intr_handler,
+	.get_link_status = ael100x_get_link_status,
+	.power_down = ael1006_power_down,
+};
+
+void t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
+			 int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops);
+	ael100x_txon(phy);
+}
+
+static struct cphy_ops qt2045_ops = {
+	.reset = ael1006_reset,
+	.intr_enable = ael1006_intr_enable,
+	.intr_disable = ael1006_intr_disable,
+	.intr_clear = ael1006_intr_clear,
+	.intr_handler = ael1006_intr_handler,
+	.get_link_status = ael100x_get_link_status,
+	.power_down = ael1006_power_down,
+};
+
+void t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
+			int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	unsigned int stat;
+
+	cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops);
+
+	/*
+	 * Some cards where the PHY is supposed to be at address 0 actually
+	 * have it at 1.
+	 */
+	if (!phy_addr && !mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &stat) &&
+	    stat == 0xffff)
+		phy->addr = 1;
+}
+
+static int xaui_direct_reset(struct cphy *phy, int wait)
+{
+	return 0;
+}
+
+static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok,
+				       int *speed, int *duplex, int *fc)
+{
+	if (link_ok) {
+		unsigned int status;
+
+		status = t3_read_reg(phy->adapter,
+				     XGM_REG(A_XGM_SERDES_STAT0, phy->addr));
+		*link_ok = !(status & F_LOWSIG0);
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	return 0;
+}
+
+static int xaui_direct_power_down(struct cphy *phy, int enable)
+{
+	return 0;
+}
+
+static struct cphy_ops xaui_direct_ops = {
+	.reset = xaui_direct_reset,
+	.intr_enable = ael1002_intr_noop,
+	.intr_disable = ael1002_intr_noop,
+	.intr_clear = ael1002_intr_noop,
+	.intr_handler = ael1002_intr_noop,
+	.get_link_status = xaui_direct_get_link_status,
+	.power_down = xaui_direct_power_down,
+};
+
+void t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
+			     int phy_addr, const struct mdio_ops *mdio_ops)
+{
+	cphy_init(phy, adapter, 1, &xaui_direct_ops, mdio_ops);
+}