summaryrefslogtreecommitdiffstats
path: root/drivers/net/bonding/bond_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bonding/bond_main.c')
-rw-r--r--drivers/net/bonding/bond_main.c343
1 files changed, 219 insertions, 124 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 94cec3cf2a13..40ff79175c4a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -489,6 +489,28 @@
* Set version to 2.6.3.
* 2005/09/26 - Jay Vosburgh <fubar@us.ibm.com>
* - Removed backwards compatibility for old ifenslaves. Version 2.6.4.
+ * 2005/09/27 - Mitch Williams <mitch.a.williams at intel dot com>
+ * - Radheka Godse <radheka.godse at intel dot com>
+ * - Split out bond creation code to allow for sysfs interface.
+ * - Removed static declaration on some functions and data items.
+ * - Added sysfs support, including capability to add/remove/change
+ * any bond at runtime.
+ *
+ * - Miscellaneous:
+ * - Added bonding: <bondname>: prefix to sysfs log messages
+ * - Added arp_ip_targets to /proc entry
+ * - Allow ARP target table to have empty entries
+ * - trivial fix: added missing modes description to modinfo
+ * - Corrected bug in ALB init where kmalloc is called inside
+ * a held lock
+ * - Corrected behavior to maintain bond link when changing
+ * from arp monitor to miimon and vice versa
+ * - Added missing bonding: <bondname>: prefix to alb, ad log messages
+ * - Fixed stack dump warnings seen if changing between miimon
+ * and arp monitoring when the bond interface is down.
+ * - Fixed stack dump warnings seen when enslaving an e100
+ * driver
+ * - Set version to 3.0.0
*/
//#define BONDING_DEBUG 1
@@ -557,6 +579,7 @@ static char *lacp_rate = NULL;
static char *xmit_hash_policy = NULL;
static int arp_interval = BOND_LINK_ARP_INTERV;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
+struct bond_params bonding_defaults;
module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
@@ -565,17 +588,24 @@ MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
-MODULE_PARM_DESC(downdelay, "Delay before considering link down, in milliseconds");
+MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
+ "in milliseconds");
module_param(use_carrier, int, 0);
-MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default)");
+MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
+ "0 for off, 1 for on (default)");
module_param(mode, charp, 0);
-MODULE_PARM_DESC(mode, "Mode of operation : 0 for round robin, 1 for active-backup, 2 for xor");
+MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
+ "1 for active-backup, 2 for balance-xor, "
+ "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
+ "6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(lacp_rate, charp, 0);
-MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner (slow/fast)");
+MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
+ "(slow/fast)");
module_param(xmit_hash_policy, charp, 0);
-MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method : 0 for layer 2 (default), 1 for layer 3+4");
+MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)"
+ ", 1 for layer 3+4");
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
@@ -586,30 +616,27 @@ MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
static const char *version =
DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
-static LIST_HEAD(bond_dev_list);
+LIST_HEAD(bond_dev_list);
#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *bond_proc_dir = NULL;
#endif
+extern struct rw_semaphore bonding_rwsem;
static u32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ;
static int arp_ip_count = 0;
static int bond_mode = BOND_MODE_ROUNDROBIN;
static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2;
static int lacp_fast = 0;
-struct bond_parm_tbl {
- char *modename;
- int mode;
-};
-static struct bond_parm_tbl bond_lacp_tbl[] = {
+struct bond_parm_tbl bond_lacp_tbl[] = {
{ "slow", AD_LACP_SLOW},
{ "fast", AD_LACP_FAST},
{ NULL, -1},
};
-static struct bond_parm_tbl bond_mode_tbl[] = {
+struct bond_parm_tbl bond_mode_tbl[] = {
{ "balance-rr", BOND_MODE_ROUNDROBIN},
{ "active-backup", BOND_MODE_ACTIVEBACKUP},
{ "balance-xor", BOND_MODE_XOR},
@@ -620,7 +647,7 @@ static struct bond_parm_tbl bond_mode_tbl[] = {
{ NULL, -1},
};
-static struct bond_parm_tbl xmit_hashtype_tbl[] = {
+struct bond_parm_tbl xmit_hashtype_tbl[] = {
{ "layer2", BOND_XMIT_POLICY_LAYER2},
{ "layer3+4", BOND_XMIT_POLICY_LAYER34},
{ NULL, -1},
@@ -628,12 +655,11 @@ static struct bond_parm_tbl xmit_hashtype_tbl[] = {
/*-------------------------- Forward declarations ---------------------------*/
-static inline void bond_set_mode_ops(struct bonding *bond, int mode);
static void bond_send_gratuitous_arp(struct bonding *bond);
/*---------------------------- General routines -----------------------------*/
-static const char *bond_mode_name(int mode)
+const char *bond_mode_name(int mode)
{
switch (mode) {
case BOND_MODE_ROUNDROBIN :
@@ -910,7 +936,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_add_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to add vlan id %d\n",
+ ": %s: Error: Failed to add vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -944,7 +970,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_del_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to remove vlan id %d\n",
+ ": %s: Error: Failed to remove vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -1449,7 +1475,7 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
-static void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
+void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
{
struct slave *old_active = bond->curr_active_slave;
@@ -1523,7 +1549,7 @@ static void bond_change_active_slave(struct bonding *bond, struct slave *new_act
*
* Warning: Caller must hold curr_slave_lock for writing.
*/
-static void bond_select_active_slave(struct bonding *bond)
+void bond_select_active_slave(struct bonding *bond)
{
struct slave *best_slave;
@@ -1591,7 +1617,7 @@ static void bond_detach_slave(struct bonding *bond, struct slave *slave)
/*---------------------------------- IOCTL ----------------------------------*/
-static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
{
dprintk("bond_dev=%p\n", bond_dev);
dprintk("slave_dev=%p\n", slave_dev);
@@ -1631,7 +1657,7 @@ static int bond_compute_features(struct bonding *bond)
}
/* enslave device <slave> to bond device <master> */
-static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *new_slave = NULL;
@@ -1644,8 +1670,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
slave_dev->do_ioctl == NULL) {
printk(KERN_WARNING DRV_NAME
- ": Warning : no link monitoring support for %s\n",
- slave_dev->name);
+ ": %s: Warning: no link monitoring support for %s\n",
+ bond_dev->name, slave_dev->name);
}
/* bond must be initialized by bond_open() before enslaving */
@@ -1666,17 +1692,17 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
if (!list_empty(&bond->vlan_list)) {
printk(KERN_ERR DRV_NAME
- ": Error: cannot enslave VLAN "
+ ": %s: Error: cannot enslave VLAN "
"challenged slave %s on VLAN enabled "
- "bond %s\n", slave_dev->name,
+ "bond %s\n", bond_dev->name, slave_dev->name,
bond_dev->name);
return -EPERM;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: enslaved VLAN challenged "
+ ": %s: Warning: enslaved VLAN challenged "
"slave %s. Adding VLANs will be blocked as "
"long as %s is part of bond %s\n",
- slave_dev->name, slave_dev->name,
+ bond_dev->name, slave_dev->name, slave_dev->name,
bond_dev->name);
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
@@ -1706,12 +1732,11 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (slave_dev->set_mac_address == NULL) {
printk(KERN_ERR DRV_NAME
- ": Error: The slave device you specified does "
- "not support setting the MAC address.\n");
- printk(KERN_ERR
- "Your kernel likely does not support slave devices.\n");
-
- res = -EOPNOTSUPP;
+ ": %s: Error: The slave device you specified does "
+ "not support setting the MAC address. "
+ "Your kernel likely does not support slave "
+ "devices.\n", bond_dev->name);
+ res = -EOPNOTSUPP;
goto err_undo_flags;
}
@@ -1827,21 +1852,21 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
* the messages for netif_carrier.
*/
printk(KERN_WARNING DRV_NAME
- ": Warning: MII and ETHTOOL support not "
+ ": %s: Warning: MII and ETHTOOL support not "
"available for interface %s, and "
"arp_interval/arp_ip_target module parameters "
"not specified, thus bonding will not detect "
"link failures! see bonding.txt for details.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
printk(KERN_WARNING DRV_NAME
- ": Warning: can't get link status from "
+ ": %s: Warning: can't get link status from "
"interface %s; the network driver associated "
"with this interface does not support MII or "
"ETHTOOL link status reporting, thus miimon "
"has no effect on this interface.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
}
}
@@ -1868,15 +1893,15 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (bond_update_speed_duplex(new_slave) &&
(new_slave->link != BOND_LINK_DOWN)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: failed to get speed and duplex from %s, "
+ ": %s: Warning: failed to get speed and duplex from %s, "
"assumed to be 100Mb/sec and Full.\n",
- new_slave->dev->name);
+ bond_dev->name, new_slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD) {
- printk(KERN_WARNING
- "Operation of 802.3ad mode requires ETHTOOL "
+ printk(KERN_WARNING DRV_NAME
+ ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
"support in base driver for proper aggregator "
- "selection.\n");
+ "selection.\n", bond_dev->name);
}
}
@@ -1958,6 +1983,10 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
write_unlock_bh(&bond->lock);
+ res = bond_create_slave_symlinks(bond_dev, slave_dev);
+ if (res)
+ goto err_unset_master;
+
printk(KERN_INFO DRV_NAME
": %s: enslaving %s as a%s interface with a%s link.\n",
bond_dev->name, slave_dev->name,
@@ -1999,7 +2028,7 @@ err_undo_flags:
* for Bonded connections:
* The first up interface should be left on and all others downed.
*/
-static int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
+int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
@@ -2010,7 +2039,7 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
if (!(slave_dev->flags & IFF_SLAVE) ||
(slave_dev->master != bond_dev)) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: cannot release %s.\n",
+ ": %s: Error: cannot release %s.\n",
bond_dev->name, slave_dev->name);
return -EINVAL;
}
@@ -2031,11 +2060,12 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
ETH_ALEN);
if (!mac_addr_differ && (bond->slave_cnt > 1)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: the permanent HWaddr of %s "
+ ": %s: Warning: the permanent HWaddr of %s "
"- %02X:%02X:%02X:%02X:%02X:%02X - is "
"still in use by %s. Set the HWaddr of "
"%s to a different address to avoid "
"conflicts.\n",
+ bond_dev->name,
slave_dev->name,
slave->perm_hwaddr[0],
slave->perm_hwaddr[1],
@@ -2111,24 +2141,28 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
!bond_has_challenged_slaves(bond)) {
printk(KERN_INFO DRV_NAME
- ": last VLAN challenged slave %s "
+ ": %s: last VLAN challenged slave %s "
"left bond %s. VLAN blocking is removed\n",
- slave_dev->name, bond_dev->name);
+ bond_dev->name, slave_dev->name, bond_dev->name);
bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
write_unlock_bh(&bond->lock);
+ /* must do this from outside any spinlocks */
+ bond_destroy_slave_symlinks(bond_dev, slave_dev);
+
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
@@ -2220,6 +2254,7 @@ static int bond_release_all(struct net_device *bond_dev)
*/
write_unlock_bh(&bond->lock);
+ bond_destroy_slave_symlinks(bond_dev, slave_dev);
bond_del_vlans_from_slave(bond, slave_dev);
/* If the mode USES_PRIMARY, then we should only remove its
@@ -2274,12 +2309,13 @@ static int bond_release_all(struct net_device *bond_dev)
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
printk(KERN_INFO DRV_NAME
@@ -2397,7 +2433,7 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
/*-------------------------------- Monitoring -------------------------------*/
/* this function is called regularly to monitor each slave's link. */
-static void bond_mii_monitor(struct net_device *bond_dev)
+void bond_mii_monitor(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
@@ -2596,8 +2632,11 @@ static void bond_mii_monitor(struct net_device *bond_dev)
break;
default:
/* Should not happen */
- printk(KERN_ERR "bonding: Error: %s Illegal value (link=%d)\n",
- slave->dev->name, slave->link);
+ printk(KERN_ERR DRV_NAME
+ ": %s: Error: %s Illegal value (link=%d)\n",
+ bond_dev->name,
+ slave->dev->name,
+ slave->link);
goto out;
} /* end of switch (slave->link) */
@@ -2721,7 +2760,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
struct flowi fl;
struct rtable *rt;
- for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ if (!targets[i])
+ continue;
dprintk("basa: target %x\n", targets[i]);
if (list_empty(&bond->vlan_list)) {
dprintk("basa: empty vlan: arp_send\n");
@@ -2825,7 +2866,7 @@ static void bond_send_gratuitous_arp(struct bonding *bond)
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
* arp monitoring in active backup mode.
*/
-static void bond_loadbalance_arp_mon(struct net_device *bond_dev)
+void bond_loadbalance_arp_mon(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave, *oldcurrent;
@@ -2963,7 +3004,7 @@ out:
* may have received.
* see loadbalance_arp_monitor for arp monitoring in load balancing mode
*/
-static void bond_activebackup_arp_mon(struct net_device *bond_dev)
+void bond_activebackup_arp_mon(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
struct slave *slave;
@@ -3249,6 +3290,8 @@ static void bond_info_show_master(struct seq_file *seq)
{
struct bonding *bond = seq->private;
struct slave *curr;
+ int i;
+ u32 target;
read_lock(&bond->curr_slave_lock);
curr = bond->curr_active_slave;
@@ -3257,10 +3300,17 @@ static void bond_info_show_master(struct seq_file *seq)
seq_printf(seq, "Bonding Mode: %s\n",
bond_mode_name(bond->params.mode));
+ if (bond->params.mode == BOND_MODE_XOR ||
+ bond->params.mode == BOND_MODE_8023AD) {
+ seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
+ xmit_hashtype_tbl[bond->params.xmit_policy].modename,
+ bond->params.xmit_policy);
+ }
+
if (USES_PRIMARY(bond->params.mode)) {
seq_printf(seq, "Primary Slave: %s\n",
- (bond->params.primary[0]) ?
- bond->params.primary : "None");
+ (bond->primary_slave) ?
+ bond->primary_slave->dev->name : "None");
seq_printf(seq, "Currently Active Slave: %s\n",
(curr) ? curr->dev->name : "None");
@@ -3273,6 +3323,27 @@ static void bond_info_show_master(struct seq_file *seq)
seq_printf(seq, "Down Delay (ms): %d\n",
bond->params.downdelay * bond->params.miimon);
+
+ /* ARP information */
+ if(bond->params.arp_interval > 0) {
+ int printed=0;
+ seq_printf(seq, "ARP Polling Interval (ms): %d\n",
+ bond->params.arp_interval);
+
+ seq_printf(seq, "ARP IP target/s (n.n.n.n form):");
+
+ for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
+ if (!bond->params.arp_targets[i])
+ continue;
+ if (printed)
+ seq_printf(seq, ",");
+ target = ntohl(bond->params.arp_targets[i]);
+ seq_printf(seq, " %d.%d.%d.%d", HIPQUAD(target));
+ printed = 1;
+ }
+ seq_printf(seq, "\n");
+ }
+
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
@@ -3478,7 +3549,10 @@ static int bond_event_changename(struct bonding *bond)
bond_remove_proc_entry(bond);
bond_create_proc_entry(bond);
#endif
-
+ down_write(&(bonding_rwsem));
+ bond_destroy_sysfs_entry(bond);
+ bond_create_sysfs_entry(bond);
+ up_write(&(bonding_rwsem));
return NOTIFY_DONE;
}
@@ -3955,6 +4029,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
return -EPERM;
}
+ down_write(&(bonding_rwsem));
slave_dev = dev_get_by_name(ifr->ifr_slave);
dprintk("slave_dev=%p: \n", slave_dev);
@@ -3987,6 +4062,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
dev_put(slave_dev);
}
+ up_write(&(bonding_rwsem));
return res;
}
@@ -4071,6 +4147,7 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
bond_for_each_slave(bond, slave, i) {
dprintk("s %p s->p %p c_m %p\n", slave,
slave->prev, slave->dev->change_mtu);
+
res = dev_set_mtu(slave->dev, new_mtu);
if (res) {
@@ -4397,8 +4474,9 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
printk(KERN_ERR DRV_NAME
- ": Error: bond_xmit_broadcast(): "
- "skb_clone() failed\n");
+ ": %s: Error: bond_xmit_broadcast(): "
+ "skb_clone() failed\n",
+ bond_dev->name);
continue;
}
@@ -4431,7 +4509,7 @@ out:
/*
* set bond mode specific net device operations
*/
-static inline void bond_set_mode_ops(struct bonding *bond, int mode)
+void bond_set_mode_ops(struct bonding *bond, int mode)
{
struct net_device *bond_dev = bond->dev;
@@ -4467,7 +4545,8 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode)
default:
/* Should never happen, mode already checked */
printk(KERN_ERR DRV_NAME
- ": Error: Unknown bonding mode %d\n",
+ ": %s: Error: Unknown bonding mode %d\n",
+ bond_dev->name,
mode);
break;
}
@@ -4491,7 +4570,7 @@ static struct ethtool_ops bond_ethtool_ops = {
* Does not allocate but creates a /proc entry.
* Allowed to fail.
*/
-static int __init bond_init(struct net_device *bond_dev, struct bond_params *params)
+static int bond_init(struct net_device *bond_dev, struct bond_params *params)
{
struct bonding *bond = bond_dev->priv;
@@ -4565,7 +4644,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
/* De-initialize device specific data.
* Caller must hold rtnl_lock.
*/
-static inline void bond_deinit(struct net_device *bond_dev)
+void bond_deinit(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
@@ -4601,7 +4680,7 @@ static void bond_free_all(void)
* Convert string input module parms. Accept either the
* number of the mode or its string name.
*/
-static inline int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl)
+int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl)
{
int i;
@@ -4670,7 +4749,7 @@ static int bond_check_params(struct bond_params *params)
if (max_bonds < 1 || max_bonds > INT_MAX) {
printk(KERN_WARNING DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it "
- "was reset to BOND_DEFAULT_MAX_BONDS (%d)",
+ "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
@@ -4881,81 +4960,96 @@ static int bond_check_params(struct bond_params *params)
return 0;
}
+/* Create a new bond based on the specified name and bonding parameters.
+ * Caller must NOT hold rtnl_lock; we need to release it here before we
+ * set up our sysfs entries.
+ */
+int bond_create(char *name, struct bond_params *params, struct bonding **newbond)
+{
+ struct net_device *bond_dev;
+ int res;
+
+ rtnl_lock();
+ bond_dev = alloc_netdev(sizeof(struct bonding), name, ether_setup);
+ if (!bond_dev) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: eek! can't alloc netdev!\n",
+ name);
+ res = -ENOMEM;
+ goto out_rtnl;
+ }
+
+ /* bond_init() must be called after dev_alloc_name() (for the
+ * /proc files), but before register_netdevice(), because we
+ * need to set function pointers.
+ */
+
+ res = bond_init(bond_dev, params);
+ if (res < 0) {
+ goto out_netdev;
+ }
+
+ SET_MODULE_OWNER(bond_dev);
+
+ res = register_netdevice(bond_dev);
+ if (res < 0) {
+ goto out_bond;
+ }
+ if (newbond)
+ *newbond = bond_dev->priv;
+
+ rtnl_unlock(); /* allows sysfs registration of net device */
+ res = bond_create_sysfs_entry(bond_dev->priv);
+ goto done;
+out_bond:
+ bond_deinit(bond_dev);
+out_netdev:
+ free_netdev(bond_dev);
+out_rtnl:
+ rtnl_unlock();
+done:
+ return res;
+}
+
static int __init bonding_init(void)
{
- struct bond_params params;
int i;
int res;
+ char new_bond_name[8]; /* Enough room for 999 bonds at init. */
printk(KERN_INFO "%s", version);
- res = bond_check_params(&params);
+ res = bond_check_params(&bonding_defaults);
if (res) {
- return res;
+ goto out;
}
- rtnl_lock();
-
#ifdef CONFIG_PROC_FS
bond_create_proc_dir();
#endif
-
for (i = 0; i < max_bonds; i++) {
- struct net_device *bond_dev;
-
- bond_dev = alloc_netdev(sizeof(struct bonding), "", ether_setup);
- if (!bond_dev) {
- res = -ENOMEM;
- goto out_err;
- }
-
- res = dev_alloc_name(bond_dev, "bond%d");
- if (res < 0) {
- free_netdev(bond_dev);
- goto out_err;
- }
-
- /* bond_init() must be called after dev_alloc_name() (for the
- * /proc files), but before register_netdevice(), because we
- * need to set function pointers.
- */
- res = bond_init(bond_dev, &params);
- if (res < 0) {
- free_netdev(bond_dev);
- goto out_err;
- }
-
- SET_MODULE_OWNER(bond_dev);
-
- res = register_netdevice(bond_dev);
- if (res < 0) {
- bond_deinit(bond_dev);
- free_netdev(bond_dev);
- goto out_err;
- }
+ sprintf(new_bond_name, "bond%d",i);
+ res = bond_create(new_bond_name,&bonding_defaults, NULL);
+ if (res)
+ goto err;
}
- rtnl_unlock();
+ res = bond_create_sysfs();
+ if (res)
+ goto err;
+
register_netdevice_notifier(&bond_netdev_notifier);
register_inetaddr_notifier(&bond_inetaddr_notifier);
- return 0;
-
-out_err:
- /*
- * rtnl_unlock() will run netdev_run_todo(), putting the
- * thus-far-registered bonding devices into a state which
- * unregigister_netdevice() will accept
- */
- rtnl_unlock();
+ goto out;
+err:
rtnl_lock();
-
- /* free and unregister all bonds that were successfully added */
bond_free_all();
-
+ bond_destroy_sysfs();
rtnl_unlock();
-
+out:
return res;
+
}
static void __exit bonding_exit(void)
@@ -4965,6 +5059,7 @@ static void __exit bonding_exit(void)
rtnl_lock();
bond_free_all();
+ bond_destroy_sysfs();
rtnl_unlock();
}
OpenPOWER on IntegriCloud