diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mtd/maps/redwood.c | 43 | ||||
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/mtd/nand/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/nand/denali.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/jz4740_nand.c | 516 | ||||
| -rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 33 | ||||
| -rw-r--r-- | drivers/mtd/ubi/build.c | 3 | ||||
| -rw-r--r-- | drivers/mtd/ubi/eba.c | 49 | ||||
| -rw-r--r-- | drivers/mtd/ubi/io.c | 60 | ||||
| -rw-r--r-- | drivers/mtd/ubi/scan.c | 131 | ||||
| -rw-r--r-- | drivers/mtd/ubi/scan.h | 19 | ||||
| -rw-r--r-- | drivers/mtd/ubi/ubi.h | 10 |
13 files changed, 730 insertions, 145 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index f22bc9f05ddb..6629d09f3b38 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -321,7 +321,7 @@ config MTD_CFI_FLAGADM config MTD_REDWOOD tristate "CFI Flash devices mapped on IBM Redwood" - depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) + depends on MTD_CFI help This enables access routines for the flash chips on the IBM Redwood board. If you have one of these boards and would like to diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c index 933c0b63b016..d2c9db00db0c 100644 --- a/drivers/mtd/maps/redwood.c +++ b/drivers/mtd/maps/redwood.c @@ -22,8 +22,6 @@ #include <asm/io.h> -#if !defined (CONFIG_REDWOOD_6) - #define WINDOW_ADDR 0xffc00000 #define WINDOW_SIZE 0x00400000 @@ -69,47 +67,6 @@ static struct mtd_partition redwood_flash_partitions[] = { } }; -#else /* CONFIG_REDWOOD_6 */ -/* FIXME: the window is bigger - armin */ -#define WINDOW_ADDR 0xff800000 -#define WINDOW_SIZE 0x00800000 - -#define RW_PART0_OF 0 -#define RW_PART0_SZ 0x400000 /* 4 MiB data */ -#define RW_PART1_OF RW_PART0_OF + RW_PART0_SZ -#define RW_PART1_SZ 0x10000 /* 64K VPD */ -#define RW_PART2_OF RW_PART1_OF + RW_PART1_SZ -#define RW_PART2_SZ 0x400000 - (0x10000 + 0x20000) -#define RW_PART3_OF RW_PART2_OF + RW_PART2_SZ -#define RW_PART3_SZ 0x20000 - -static struct mtd_partition redwood_flash_partitions[] = { - { - .name = "Redwood filesystem", - .offset = RW_PART0_OF, - .size = RW_PART0_SZ - }, - { - .name = "Redwood OpenBIOS Vital Product Data", - .offset = RW_PART1_OF, - .size = RW_PART1_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "Redwood kernel", - .offset = RW_PART2_OF, - .size = RW_PART2_SZ - }, - { - .name = "Redwood OpenBIOS", - .offset = RW_PART3_OF, - .size = RW_PART3_SZ, - .mask_flags = MTD_WRITEABLE /* force read-only */ - } -}; - -#endif /* CONFIG_REDWOOD_6 */ - struct map_info redwood_flash_map = { .name = "IBM Redwood", .size = WINDOW_SIZE, diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index ffc3720929f1..362d177efe1b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -526,4 +526,10 @@ config MTD_NAND_NUC900 This enables the driver for the NAND Flash on evaluation board based on w90p910 / NUC9xx. +config MTD_NAND_JZ4740 + tristate "Support for JZ4740 SoC NAND controller" + depends on MACH_JZ4740 + help + Enables support for NAND Flash on JZ4740 SoC based boards. + endif # MTD_NAND diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index e8ab884ba47b..ac83dcdac5d6 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -46,5 +46,6 @@ obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o obj-$(CONFIG_MTD_NAND_RICOH) += r852.o +obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index ca03428b59cc..3dfda9cc677d 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern, }; -/* initalize driver data structures */ +/* initialize driver data structures */ void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c new file mode 100644 index 000000000000..67343fc31bd5 --- /dev/null +++ b/drivers/mtd/nand/jz4740_nand.c @@ -0,0 +1,516 @@ +/* + * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * JZ4740 SoC NAND controller driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include <linux/gpio.h> + +#include <asm/mach-jz4740/jz4740_nand.h> + +#define JZ_REG_NAND_CTRL 0x50 +#define JZ_REG_NAND_ECC_CTRL 0x100 +#define JZ_REG_NAND_DATA 0x104 +#define JZ_REG_NAND_PAR0 0x108 +#define JZ_REG_NAND_PAR1 0x10C +#define JZ_REG_NAND_PAR2 0x110 +#define JZ_REG_NAND_IRQ_STAT 0x114 +#define JZ_REG_NAND_IRQ_CTRL 0x118 +#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2)) + +#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4) +#define JZ_NAND_ECC_CTRL_ENCODING BIT(3) +#define JZ_NAND_ECC_CTRL_RS BIT(2) +#define JZ_NAND_ECC_CTRL_RESET BIT(1) +#define JZ_NAND_ECC_CTRL_ENABLE BIT(0) + +#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29)) +#define JZ_NAND_STATUS_PAD_FINISH BIT(4) +#define JZ_NAND_STATUS_DEC_FINISH BIT(3) +#define JZ_NAND_STATUS_ENC_FINISH BIT(2) +#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1) +#define JZ_NAND_STATUS_ERROR BIT(0) + +#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1) +#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1) + +#define JZ_NAND_MEM_ADDR_OFFSET 0x10000 +#define JZ_NAND_MEM_CMD_OFFSET 0x08000 + +struct jz_nand { + struct mtd_info mtd; + struct nand_chip chip; + void __iomem *base; + struct resource *mem; + + void __iomem *bank_base; + struct resource *bank_mem; + + struct jz_nand_platform_data *pdata; + bool is_reading; +}; + +static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd) +{ + return container_of(mtd, struct jz_nand, mtd); +} + +static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) +{ + struct jz_nand *nand = mtd_to_jz_nand(mtd); + struct nand_chip *chip = mtd->priv; + uint32_t reg; + + if (ctrl & NAND_CTRL_CHANGE) { + BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE)); + if (ctrl & NAND_ALE) + chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET; + else if (ctrl & NAND_CLE) + chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET; + else + chip->IO_ADDR_W = nand->bank_base; + + reg = readl(nand->base + JZ_REG_NAND_CTRL); + if (ctrl & NAND_NCE) + reg |= JZ_NAND_CTRL_ASSERT_CHIP(0); + else + reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0); + writel(reg, nand->base + JZ_REG_NAND_CTRL); + } + if (dat != NAND_CMD_NONE) + writeb(dat, chip->IO_ADDR_W); +} + +static int jz_nand_dev_ready(struct mtd_info *mtd) +{ + struct jz_nand *nand = mtd_to_jz_nand(mtd); + return gpio_get_value_cansleep(nand->pdata->busy_gpio); +} + +static void jz_nand_hwctl(struct mtd_info *mtd, int mode) +{ + struct jz_nand *nand = mtd_to_jz_nand(mtd); + uint32_t reg; + + writel(0, nand->base + JZ_REG_NAND_IRQ_STAT); + reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); + + reg |= JZ_NAND_ECC_CTRL_RESET; + reg |= JZ_NAND_ECC_CTRL_ENABLE; + reg |= JZ_NAND_ECC_CTRL_RS; + + switch (mode) { + case NAND_ECC_READ: + reg &= ~JZ_NAND_ECC_CTRL_ENCODING; + nand->is_reading = true; + break; + case NAND_ECC_WRITE: + reg |= JZ_NAND_ECC_CTRL_ENCODING; + nand->is_reading = false; + break; + default: + break; + } + + writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); +} + +static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code) +{ + struct jz_nand *nand = mtd_to_jz_nand(mtd); + uint32_t reg, status; + int i; + unsigned int timeout = 1000; + static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4, + 0x8b, 0xff, 0xb7, 0x6f}; + + if (nand->is_reading) + return 0; + + do { + status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); + } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout); + + if (timeout == 0) + return -1; + + reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); + reg &= ~JZ_NAND_ECC_CTRL_ENABLE; + writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); + + for (i = 0; i < 9; ++i) + ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i); + + /* If the written data is completly 0xff, we also want to write 0xff as + * ecc, otherwise we will get in trouble when doing subpage writes. */ + if (memcmp(ecc_code, empty_block_ecc, 9) == 0) + memset(ecc_code, 0xff, 9); + + return 0; +} + +static void jz_nand_correct_data(uint8_t *dat, int index, int mask) +{ + int offset = index & 0x7; + uint16_t data; + + index += (index >> 3); + + data = dat[index]; + data |= dat[index+1] << 8; + + mask ^= (data >> offset) & 0x1ff; + data &= ~(0x1ff << offset); + data |= (mask << offset); + + dat[index] = data & 0xff; + dat[index+1] = (data >> 8) & 0xff; +} + +static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat, + uint8_t *read_ecc, uint8_t *calc_ecc) +{ + struct jz_nand *nand = mtd_to_jz_nand(mtd); + int i, error_count, index; + uint32_t reg, status, error; + uint32_t t; + unsigned int timeout = 1000; + + t = read_ecc[0]; + + if (t == 0xff) { + for (i = 1; i < 9; ++i) + t &= read_ecc[i]; + + t &= dat[0]; + t &= dat[nand->chip.ecc.size / 2]; + t &= dat[nand->chip.ecc.size - 1]; + + if (t == 0xff) { + for (i = 1; i < nand->chip.ecc.size - 1; ++i) + t &= dat[i]; + if (t == 0xff) + return 0; + } + } + + for (i = 0; i < 9; ++i) + writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i); + + reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); + reg |= JZ_NAND_ECC_CTRL_PAR_READY; + writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); + + do { + status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); + } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout); + + if (timeout == 0) + return -1; + + reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); + reg &= ~JZ_NAND_ECC_CTRL_ENABLE; + writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); + + if (status & JZ_NAND_STATUS_ERROR) { + if (status & JZ_NAND_STATUS_UNCOR_ERROR) + return -1; + + error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29; + + for (i = 0; i < error_count; ++i) { + error = readl(nand->base + JZ_REG_NAND_ERR(i)); + index = ((error >> 16) & 0x1ff) - 1; + if (index >= 0 && index < 512) + jz_nand_correct_data(dat, index, error & 0x1ff); + } + + return error_count; + } + + return 0; +} + + +/* Copy paste of nand_read_page_hwecc_oob_first except for different eccpos + * handling. The ecc area is for 4k chips 72 bytes long and thus does not fit + * into the eccpos array. */ +static int jz_nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + unsigned int ecc_offset = chip->page_shift; + + /* Read the OOB area first */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + + stat = chip->ecc.correct(mtd, p, &chip->oob_poi[i], NULL); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + +/* Copy-and-paste of nand_write_page_hwecc with different eccpos handling. */ +static void jz_nand_write_page_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + const uint8_t *p = buf; + unsigned int ecc_offset = chip->page_shift; + + for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &chip->oob_poi[i]); + } + + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); +} + +#ifdef CONFIG_MTD_CMDLINE_PARTS +static const char *part_probes[] = {"cmdline", NULL}; +#endif + +static int jz_nand_ioremap_resource(struct platform_device *pdev, + const char *name, struct resource **res, void __iomem **base) +{ + int ret; + + *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); + if (!*res) { + dev_err(&pdev->dev, "Failed to get platform %s memory\n", name); + ret = -ENXIO; + goto err; + } + + *res = request_mem_region((*res)->start, resource_size(*res), + pdev->name); + if (!*res) { + dev_err(&pdev->dev, "Failed to request %s memory region\n", name); + ret = -EBUSY; + goto err; + } + + *base = ioremap((*res)->start, resource_size(*res)); + if (!*base) { + dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name); + ret = -EBUSY; + goto err_release_mem; + } + + return 0; + +err_release_mem: + release_mem_region((*res)->start, resource_size(*res)); +err: + *res = NULL; + *base = NULL; + return ret; +} + +static int __devinit jz_nand_probe(struct platform_device *pdev) +{ + int ret; + struct jz_nand *nand; + struct nand_chip *chip; + struct mtd_info *mtd; + struct jz_nand_platform_data *pdata = pdev->dev.platform_data; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *partition_info; + int num_partitions = 0; +#endif + + nand = kzalloc(sizeof(*nand), GFP_KERNEL); + if (!nand) { + dev_err(&pdev->dev, "Failed to allocate device structure.\n"); + return -ENOMEM; + } + + ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base); + if (ret) + goto err_free; + ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem, + &nand->bank_base); + if (ret) + goto err_iounmap_mmio; + + if (pdata && gpio_is_valid(pdata->busy_gpio)) { + ret = gpio_request(pdata->busy_gpio, "NAND busy pin"); + if (ret) { + dev_err(&pdev->dev, + "Failed to request busy gpio %d: %d\n", + pdata->busy_gpio, ret); + goto err_iounmap_mem; + } + } + + mtd = &nand->mtd; + chip = &nand->chip; + mtd->priv = chip; + mtd->owner = THIS_MODULE; + mtd->name = "jz4740-nand"; + + chip->ecc.hwctl = jz_nand_hwctl; + chip->ecc.calculate = jz_nand_calculate_ecc_rs; + chip->ecc.correct = jz_nand_correct_ecc_rs; + chip->ecc.mode = NAND_ECC_HW_OOB_FIRST; + chip->ecc.size = 512; + chip->ecc.bytes = 9; + + chip->ecc.read_page = jz_nand_read_page_hwecc_oob_first; + chip->ecc.write_page = jz_nand_write_page_hwecc; + + if (pdata) + chip->ecc.layout = pdata->ecc_layout; + + chip->chip_delay = 50; + chip->cmd_ctrl = jz_nand_cmd_ctrl; + + if (pdata && gpio_is_valid(pdata->busy_gpio)) + chip->dev_ready = jz_nand_dev_ready; + + chip->IO_ADDR_R = nand->bank_base; + chip->IO_ADDR_W = nand->bank_base; + + nand->pdata = pdata; + platform_set_drvdata(pdev, nand); + + writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL); + + ret = nand_scan_ident(mtd, 1, NULL); + if (ret) { + dev_err(&pdev->dev, "Failed to scan nand\n"); + goto err_gpio_free; + } + + if (pdata && pdata->ident_callback) { + pdata->ident_callback(pdev, chip, &pdata->partitions, + &pdata->num_partitions); + } + + ret = nand_scan_tail(mtd); + if (ret) { + dev_err(&pdev->dev, "Failed to scan nand\n"); + goto err_gpio_free; + } + +#ifdef CONFIG_MTD_PARTITIONS +#ifdef CONFIG_MTD_CMDLINE_PARTS + num_partitions = parse_mtd_partitions(mtd, part_probes, + &partition_info, 0); +#endif + if (num_partitions <= 0 && pdata) { + num_partitions = pdata->num_partitions; + partition_info = pdata->partitions; + } + + if (num_partitions > 0) + ret = add_mtd_partitions(mtd, partition_info, num_partitions); + else +#endif + ret = add_mtd_device(mtd); + + if (ret) { + dev_err(&pdev->dev, "Failed to add mtd device\n"); + goto err_nand_release; + } + + dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n"); + + return 0; + +err_nand_release: + nand_release(&nand->mtd); +err_gpio_free: + platform_set_drvdata(pdev, NULL); + gpio_free(pdata->busy_gpio); +err_iounmap_mem: + iounmap(nand->bank_base); +err_iounmap_mmio: + iounmap(nand->base); +err_free: + kfree(nand); + return ret; +} + +static int __devexit jz_nand_remove(struct platform_device *pdev) +{ + struct jz_nand *nand = platform_get_drvdata(pdev); + + nand_release(&nand->mtd); + + /* Deassert and disable all chips */ + writel(0, nand->base + JZ_REG_NAND_CTRL); + + iounmap(nand->bank_base); + release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem)); + iounmap(nand->base); + release_mem_region(nand->mem->start, resource_size(nand->mem)); + + platform_set_drvdata(pdev, NULL); + kfree(nand); + + return 0; +} + +struct platform_driver jz_nand_driver = { + .probe = jz_nand_probe, + .remove = __devexit_p(jz_nand_remove), + .driver = { + .name = "jz4740-nand", + .owner = THIS_MODULE, + }, +}; + +static int __init jz_nand_init(void) +{ + return platform_driver_register(&jz_nand_driver); +} +module_init(jz_nand_init); + +static void __exit jz_nand_exit(void) +{ + platform_driver_unregister(&jz_nand_driver); +} +module_exit(jz_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC"); +MODULE_ALIAS("platform:jz4740-nand"); diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 82e94389824e..0d76b169482f 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, else host->buf_start = column + mtd->writesize; - if (mtd->writesize > 512) - command = NAND_CMD_READ0; /* only READ0 is valid */ + command = NAND_CMD_READ0; /* only READ0 is valid */ send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); @@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_SEQIN: - if (column >= mtd->writesize) { - /* - * FIXME: before send SEQIN command for write OOB, - * We must read one page out. - * For K9F1GXX has no READ1 command to set current HW - * pointer to spare area, we must write the whole page - * including OOB together. - */ - if (mtd->writesize > 512) - /* call ourself to read a page */ - mxc_nand_command(mtd, NAND_CMD_READ0, 0, - page_addr); - - host->buf_start = column; - - /* Set program pointer to spare region */ - if (mtd->writesize == 512) - send_cmd(host, NAND_CMD_READOOB, false); - } else { - host->buf_start = column; + if (column >= mtd->writesize) + /* call ourself to read a page */ + mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr); - /* Set program pointer to page start */ - if (mtd->writesize == 512) - send_cmd(host, NAND_CMD_READ0, false); - } + host->buf_start = column; send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); @@ -853,6 +832,8 @@ static int __init mxcnd_probe(struct platform_device *pdev) parse_mtd_partitions(mtd, part_probes, &host->parts, 0); if (nr_parts > 0) add_mtd_partitions(mtd, host->parts, nr_parts); + else if (pdata->parts) + add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts); else #endif { diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 13b05cb33b08..78ae89488a4f 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -593,6 +593,7 @@ static int attach_by_scanning(struct ubi_device *ubi) ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count; ubi->max_ec = si->max_ec; ubi->mean_ec = si->mean_ec; + ubi_msg("max. sequence number: %llu", si->max_sqnum); err = ubi_read_volume_table(ubi, si); if (err) @@ -981,7 +982,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) ubi_msg("number of PEBs reserved for bad PEB handling: %d", ubi->beb_rsvd_pebs); ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); - ubi_msg("image sequence number: %d", ubi->image_seq); + ubi_msg("image sequence number: %d", ubi->image_seq); /* * The below lock makes sure we do not race with 'ubi_thread()' which diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 9f87c99189a9..fe74749e0dae 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -418,7 +418,8 @@ retry: * may try to recover data. FIXME: but this is * not implemented. */ - if (err == UBI_IO_BAD_VID_HDR) { + if (err == UBI_IO_BAD_HDR_READ || + err == UBI_IO_BAD_HDR) { ubi_warn("corrupted VID header at PEB " "%d, LEB %d:%d", pnum, vol_id, lnum); @@ -961,8 +962,8 @@ write_error: */ static int is_error_sane(int err) { - if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_VID_HDR || - err == -ETIMEDOUT) + if (err == -EIO || err == -ENOMEM || err == UBI_IO_BAD_HDR || + err == UBI_IO_BAD_HDR_READ || err == -ETIMEDOUT) return 0; return 1; } @@ -1165,6 +1166,44 @@ out_unlock_leb: } /** + * print_rsvd_warning - warn about not having enough reserved PEBs. + * @ubi: UBI device description object + * + * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI + * cannot reserve enough PEBs for bad block handling. This function makes a + * decision whether we have to print a warning or not. The algorithm is as + * follows: + * o if this is a new UBI image, then just print the warning + * o if this is an UBI image which has already been used for some time, print + * a warning only if we can reserve less than 10% of the expected amount of + * the reserved PEB. + * + * The idea is that when UBI is used, PEBs become bad, and the reserved pool + * of PEBs becomes smaller, which is normal and we do not want to scare users + * with a warning every time they attach the MTD device. This was an issue + * reported by real users. + */ +static void print_rsvd_warning(struct ubi_device *ubi, + struct ubi_scan_info *si) +{ + /* + * The 1 << 18 (256KiB) number is picked randomly, just a reasonably + * large number to distinguish between newly flashed and used images. + */ + if (si->max_sqnum > (1 << 18)) { + int min = ubi->beb_rsvd_level / 10; + + if (!min) + min = 1; + if (ubi->beb_rsvd_pebs > min) + return; + } + + ubi_warn("cannot reserve enough PEBs for bad PEB handling, reserved %d," + " need %d", ubi->beb_rsvd_pebs, ubi->beb_rsvd_level); +} + +/** * ubi_eba_init_scan - initialize the EBA sub-system using scanning information. * @ubi: UBI device description object * @si: scanning information @@ -1236,9 +1275,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si) if (ubi->avail_pebs < ubi->beb_rsvd_level) { /* No enough free physical eraseblocks */ ubi->beb_rsvd_pebs = ubi->avail_pebs; - ubi_warn("cannot reserve enough PEBs for bad PEB " - "handling, reserved %d, need %d", - ubi->beb_rsvd_pebs, ubi->beb_rsvd_level); + print_rsvd_warning(ubi, si); } else ubi->beb_rsvd_pebs = ubi->beb_rsvd_level; diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index 4b979e34b159..332f992f13d9 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -150,6 +150,8 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, retry: err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf); if (err) { + const char *errstr = (err == -EBADMSG) ? " (ECC error)" : ""; + if (err == -EUCLEAN) { /* * -EUCLEAN is reported if there was a bit-flip which @@ -165,15 +167,15 @@ retry: } if (read != len && retries++ < UBI_IO_RETRIES) { - dbg_io("error %d while reading %d bytes from PEB %d:%d," + dbg_io("error %d%s while reading %d bytes from PEB %d:%d," " read only %zd bytes, retry", - err, len, pnum, offset, read); + err, errstr, len, pnum, offset, read); yield(); goto retry; } - ubi_err("error %d while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, len, pnum, offset, read); + ubi_err("error %d%s while reading %d bytes from PEB %d:%d, " + "read %zd bytes", err, errstr, len, pnum, offset, read); ubi_dbg_dump_stack(); /* @@ -515,7 +517,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum) * In this case we probably anyway have garbage in this PEB. */ err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0); - if (err1 == UBI_IO_BAD_VID_HDR) + if (err1 == UBI_IO_BAD_HDR_READ || err1 == UBI_IO_BAD_HDR) /* * The VID header is corrupted, so we can safely erase this * PEB and not afraid that it will be treated as a valid PEB in @@ -709,7 +711,7 @@ bad: * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected * and corrected by the flash driver; this is harmless but may indicate that * this eraseblock may become bad soon (but may be not); - * o %UBI_IO_BAD_EC_HDR if the erase counter header is corrupted (a CRC error); + * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error); * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty; * o a negative error code in case of failure. */ @@ -736,23 +738,21 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, * header is still OK, we just report this as there was a * bit-flip. */ - read_err = err; + if (err == -EBADMSG) + read_err = UBI_IO_BAD_HDR_READ; } magic = be32_to_cpu(ec_hdr->magic); if (magic != UBI_EC_HDR_MAGIC) { + if (read_err) + return read_err; + /* * The magic field is wrong. Let's check if we have read all * 0xFF. If yes, this physical eraseblock is assumed to be * empty. - * - * But if there was a read error, we do not test it for all - * 0xFFs. Even if it does contain all 0xFFs, this error - * indicates that something is still wrong with this physical - * eraseblock and we anyway cannot treat it as empty. */ - if (read_err != -EBADMSG && - check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { + if (check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { /* The physical eraseblock is supposedly empty */ if (verbose) ubi_warn("no EC header found at PEB %d, " @@ -774,7 +774,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad magic number at PEB %d: %08x instead of " "%08x", pnum, magic, UBI_EC_HDR_MAGIC); - return UBI_IO_BAD_EC_HDR; + return UBI_IO_BAD_HDR; } crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); @@ -788,7 +788,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad EC header CRC at PEB %d, calculated " "%#08x, read %#08x", pnum, crc, hdr_crc); - return UBI_IO_BAD_EC_HDR; + return read_err ?: UBI_IO_BAD_HDR; } /* And of course validate what has just been read from the media */ @@ -798,6 +798,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, return -EINVAL; } + /* + * If there was %-EBADMSG, but the header CRC is still OK, report about + * a bit-flip to force scrubbing on this PEB. + */ return read_err ? UBI_IO_BITFLIPS : 0; } @@ -977,7 +981,7 @@ bad: * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected * and corrected by the flash driver; this is harmless but may indicate that * this eraseblock may become bad soon; - * o %UBI_IO_BAD_VID_HDR if the volume identifier header is corrupted (a CRC + * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC * error detected); * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID * header there); @@ -1008,22 +1012,20 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, * CRC check-sum and we will identify this. If the VID header is * still OK, we just report this as there was a bit-flip. */ - read_err = err; + if (err == -EBADMSG) + read_err = UBI_IO_BAD_HDR_READ; } magic = be32_to_cpu(vid_hdr->magic); if (magic != UBI_VID_HDR_MAGIC) { + if (read_err) + return read_err; + /* * If we have read all 0xFF bytes, the VID header probably does * not exist and the physical eraseblock is assumed to be free. - * - * But if there was a read error, we do not test the data for - * 0xFFs. Even if it does contain all 0xFFs, this error - * indicates that something is still wrong with this physical - * eraseblock and it cannot be regarded as free. */ - if (read_err != -EBADMSG && - check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { + if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { /* The physical eraseblock is supposedly free */ if (verbose) ubi_warn("no VID header found at PEB %d, " @@ -1045,7 +1047,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad magic number at PEB %d: %08x instead of " "%08x", pnum, magic, UBI_VID_HDR_MAGIC); - return UBI_IO_BAD_VID_HDR; + return UBI_IO_BAD_HDR; } crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); @@ -1059,7 +1061,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, } else if (UBI_IO_DEBUG) dbg_msg("bad CRC at PEB %d, calculated %#08x, " "read %#08x", pnum, crc, hdr_crc); - return UBI_IO_BAD_VID_HDR; + return read_err ?: UBI_IO_BAD_HDR; } /* Validate the VID header that we have just read */ @@ -1069,6 +1071,10 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, return -EINVAL; } + /* + * If there was a read error (%-EBADMSG), but the header CRC is still + * OK, report about a bit-flip to force scrubbing on this PEB. + */ return read_err ? UBI_IO_BITFLIPS : 0; } diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index aed19f33b8f3..372a15ac9995 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -44,6 +44,7 @@ #include <linux/slab.h> #include <linux/crc32.h> #include <linux/math64.h> +#include <linux/random.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -72,16 +73,19 @@ static int add_to_list(struct ubi_scan_info *si, int pnum, int ec, { struct ubi_scan_leb *seb; - if (list == &si->free) + if (list == &si->free) { dbg_bld("add to free: PEB %d, EC %d", pnum, ec); - else if (list == &si->erase) + si->free_peb_count += 1; + } else if (list == &si->erase) { dbg_bld("add to erase: PEB %d, EC %d", pnum, ec); - else if (list == &si->corr) { + si->erase_peb_count += 1; + } else if (list == &si->corr) { dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec); - si->corr_count += 1; - } else if (list == &si->alien) + si->corr_peb_count += 1; + } else if (list == &si->alien) { dbg_bld("add to alien: PEB %d, EC %d", pnum, ec); - else + si->alien_peb_count += 1; + } else BUG(); seb = kmalloc(sizeof(struct ubi_scan_leb), GFP_KERNEL); @@ -517,6 +521,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si, sv->leb_count += 1; rb_link_node(&seb->u.rb, parent, p); rb_insert_color(&seb->u.rb, &sv->root); + si->used_peb_count += 1; return 0; } @@ -745,19 +750,17 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, bitflips = 1; else if (err == UBI_IO_PEB_EMPTY) return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase); - else if (err == UBI_IO_BAD_EC_HDR) { + else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR) { /* * We have to also look at the VID header, possibly it is not * corrupted. Set %bitflips flag in order to make this PEB be * moved and EC be re-created. */ - ec_corr = 1; + ec_corr = err; ec = UBI_SCAN_UNKNOWN_EC; bitflips = 1; } - si->is_empty = 0; - if (!ec_corr) { int image_seq; @@ -813,9 +816,12 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, return err; else if (err == UBI_IO_BITFLIPS) bitflips = 1; - else if (err == UBI_IO_BAD_VID_HDR || + else if (err == UBI_IO_BAD_HDR_READ || err == UBI_IO_BAD_HDR || (err == UBI_IO_PEB_FREE && ec_corr)) { /* VID header is corrupted */ + if (err == UBI_IO_BAD_HDR_READ || + ec_corr == UBI_IO_BAD_HDR_READ) + si->read_err_count += 1; err = add_to_list(si, pnum, ec, &si->corr); if (err) return err; @@ -836,11 +842,11 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, switch (vidh->compat) { case UBI_COMPAT_DELETE: ubi_msg("\"delete\" compatible internal volume %d:%d" - " found, remove it", vol_id, lnum); + " found, will remove it", vol_id, lnum); err = add_to_list(si, pnum, ec, &si->corr); if (err) return err; - break; + return 0; case UBI_COMPAT_RO: ubi_msg("read-only compatible internal volume %d:%d" @@ -855,7 +861,6 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, err = add_to_list(si, pnum, ec, &si->alien); if (err) return err; - si->alien_peb_count += 1; return 0; case UBI_COMPAT_REJECT: @@ -886,6 +891,85 @@ adjust_mean_ec: } /** + * check_what_we_have - check what PEB were found by scanning. + * @ubi: UBI device description object + * @si: scanning information + * + * This is a helper function which takes a look what PEBs were found by + * scanning, and decides whether the flash is empty and should be formatted and + * whether there are too many corrupted PEBs and we should not attach this + * MTD device. Returns zero if we should proceed with attaching the MTD device, + * and %-EINVAL if we should not. + */ +static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si) +{ + struct ubi_scan_leb *seb; + int max_corr; + + max_corr = ubi->peb_count - si->bad_peb_count - si->alien_peb_count; + max_corr = max_corr / 20 ?: 8; + + /* + * Few corrupted PEBs are not a problem and may be just a result of + * unclean reboots. However, many of them may indicate some problems + * with the flash HW or driver. + */ + if (si->corr_peb_count >= 8) { + ubi_warn("%d PEBs are corrupted", si->corr_peb_count); + printk(KERN_WARNING "corrupted PEBs are:"); + list_for_each_entry(seb, &si->corr, u.list) + printk(KERN_CONT " %d", seb->pnum); + printk(KERN_CONT "\n"); + + /* + * If too many PEBs are corrupted, we refuse attaching, + * otherwise, only print a warning. + */ + if (si->corr_peb_count >= max_corr) { + ubi_err("too many corrupted PEBs, refusing this device"); + return -EINVAL; + } + } + + if (si->free_peb_count + si->used_peb_count + + si->alien_peb_count == 0) { + /* No UBI-formatted eraseblocks were found */ + if (si->corr_peb_count == si->read_err_count && + si->corr_peb_count < 8) { + /* No or just few corrupted PEBs, and all of them had a + * read error. We assume that those are bad PEBs, which + * were just not marked as bad so far. + * + * This piece of code basically tries to distinguish + * between the following 2 situations: + * + * 1. Flash is empty, but there are few bad PEBs, which + * are not marked as bad so far, and which were read + * with error. We want to go ahead and format this + * flash. While formating, the faulty PEBs will + * probably be marked as bad. + * + * 2. Flash probably contains non-UBI data and we do + * not want to format it and destroy possibly needed + * data (e.g., consider the case when the bootloader + * MTD partition was accidentally fed to UBI). + */ + si->is_empty = 1; + ubi_msg("empty MTD device detected"); + get_random_bytes(&ubi->image_seq, sizeof(ubi->image_seq)); + } else { + ubi_err("MTD device possibly contains non-UBI data, " + "refusing it"); + return -EINVAL; + } + } + + if (si->corr_peb_count > 0) + ubi_msg("corrupted PEBs will be formatted"); + return 0; +} + +/** * ubi_scan - scan an MTD device. * @ubi: UBI device description object * @@ -909,7 +993,6 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) INIT_LIST_HEAD(&si->erase); INIT_LIST_HEAD(&si->alien); si->volumes = RB_ROOT; - si->is_empty = 1; err = -ENOMEM; ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL); @@ -935,21 +1018,9 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) if (si->ec_count) si->mean_ec = div_u64(si->ec_sum, si->ec_count); - if (si->is_empty) - ubi_msg("empty MTD device detected"); - - /* - * Few corrupted PEBs are not a problem and may be just a result of - * unclean reboots. However, many of them may indicate some problems - * with the flash HW or driver. Print a warning in this case. - */ - if (si->corr_count >= 8 || si->corr_count >= ubi->peb_count / 4) { - ubi_warn("%d PEBs are corrupted", si->corr_count); - printk(KERN_WARNING "corrupted PEBs are:"); - list_for_each_entry(seb, &si->corr, u.list) - printk(KERN_CONT " %d", seb->pnum); - printk(KERN_CONT "\n"); - } + err = check_what_we_have(ubi, si); + if (err) + goto out_vidh; /* * In case of unknown erase counter we use the mean erase counter diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index ff179ad7ca55..2576a8d1532b 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -91,10 +91,16 @@ struct ubi_scan_volume { * @erase: list of physical eraseblocks which have to be erased * @alien: list of physical eraseblocks which should not be used by UBI (e.g., * those belonging to "preserve"-compatible internal volumes) + * @used_peb_count: count of used PEBs + * @corr_peb_count: count of PEBs in the @corr list + * @read_err_count: count of PEBs read with error (%UBI_IO_BAD_HDR_READ was + * returned) + * @free_peb_count: count of PEBs in the @free list + * @erase_peb_count: count of PEBs in the @erase list + * @alien_peb_count: count of PEBs in the @alien list * @bad_peb_count: count of bad physical eraseblocks * @vols_found: number of volumes found during scanning * @highest_vol_id: highest volume ID - * @alien_peb_count: count of physical eraseblocks in the @alien list * @is_empty: flag indicating whether the MTD device is empty or not * @min_ec: lowest erase counter value * @max_ec: highest erase counter value @@ -102,7 +108,6 @@ struct ubi_scan_volume { * @mean_ec: mean erase counter value * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec - * @corr_count: count of corrupted PEBs * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -114,10 +119,15 @@ struct ubi_scan_info { struct list_head free; struct list_head erase; struct list_head alien; + int used_peb_count; + int corr_peb_count; + int read_err_count; + int free_peb_count; + int erase_peb_count; + int alien_peb_count; int bad_peb_count; int vols_found; int highest_vol_id; - int alien_peb_count; int is_empty; int min_ec; int max_ec; @@ -125,7 +135,6 @@ struct ubi_scan_info { int mean_ec; uint64_t ec_sum; int ec_count; - int corr_count; }; struct ubi_device; @@ -135,7 +144,7 @@ struct ubi_vid_hdr; * ubi_scan_move_to_list - move a PEB from the volume tree to a list. * * @sv: volume scanning information - * @seb: scanning eraseblock infprmation + * @seb: scanning eraseblock information * @list: the list to move to */ static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv, diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index a637f0283add..0359e0cce482 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -89,16 +89,16 @@ * %0xFF bytes * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a * valid erase counter header, and the rest are %0xFF bytes - * UBI_IO_BAD_EC_HDR: the erase counter header is corrupted (bad magic or CRC) - * UBI_IO_BAD_VID_HDR: the volume identifier header is corrupted (bad magic or - * CRC) + * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC) + * UBI_IO_BAD_HDR_READ: the same as %UBI_IO_BAD_HDR, but also there was a read + * error reported by the flash driver * UBI_IO_BITFLIPS: bit-flips were detected and corrected */ enum { UBI_IO_PEB_EMPTY = 1, UBI_IO_PEB_FREE, - UBI_IO_BAD_EC_HDR, - UBI_IO_BAD_VID_HDR, + UBI_IO_BAD_HDR, + UBI_IO_BAD_HDR_READ, UBI_IO_BITFLIPS }; |
