diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/maps/Kconfig | 12 | ||||
-rw-r--r-- | drivers/mtd/maps/Makefile | 3 | ||||
-rw-r--r-- | drivers/mtd/maps/elan-104nc.c | 228 |
3 files changed, 2 insertions, 241 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index f036de8080b9..d3699e9f3942 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,5 @@ # drivers/mtd/maps/Kconfig -# $Id: Kconfig,v 1.45 2005/02/27 21:50:21 ppopov Exp $ +# $Id: Kconfig,v 1.46 2005/03/02 14:51:04 dvrabel Exp $ menu "Mapping drivers for chip access" depends on MTD!=n @@ -122,16 +122,6 @@ config MTD_SBC_GXX More info at <http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>. -config MTD_ELAN_104NC - tristate "CFI Flash device mapped on Arcom ELAN-104NC" - depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS - help - This provides a driver for the on-board flash of the Arcom Control - System's ELAN-104NC development board. By default the flash - is split into 3 partitions which are accessed as separate MTD - devices. This board utilizes Intel StrataFlash. More info at - <http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>. - config MTD_LUBBOCK tristate "CFI Flash device mapped on Intel Lubbock XScale eval board" depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index d0639a85cb12..164cafc101ca 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -1,7 +1,7 @@ # # linux/drivers/maps/Makefile # -# $Id: Makefile.common,v 1.25 2005/02/27 21:50:21 ppopov Exp $ +# $Id: Makefile.common,v 1.26 2005/03/02 14:51:04 dvrabel Exp $ ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y) obj-$(CONFIG_MTD) += map_funcs.o @@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o -obj-$(CONFIG_MTD_ELAN_104NC) += elan-104nc.o obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o obj-$(CONFIG_MTD_IQ80310) += iq80310.o obj-$(CONFIG_MTD_L440GX) += l440gx.o diff --git a/drivers/mtd/maps/elan-104nc.c b/drivers/mtd/maps/elan-104nc.c deleted file mode 100644 index e9465f5c069e..000000000000 --- a/drivers/mtd/maps/elan-104nc.c +++ /dev/null @@ -1,228 +0,0 @@ -/* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC - - Copyright (C) 2000 Arcom Control System Ltd - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - - $Id: elan-104nc.c,v 1.25 2004/11/28 09:40:39 dwmw2 Exp $ - -The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16 -mode. This drivers uses the CFI probe and Intel Extended Command Set drivers. - -The flash is accessed as follows: - - 32 kbyte memory window at 0xb0000-0xb7fff - - 16 bit I/O port (0x22) for some sort of paging. - -The single flash device is divided into 3 partition which appear as separate -MTD devices. - -Linux thinks that the I/O port is used by the PIC and hence check_region() will -always fail. So we don't do it. I just hope it doesn't break anything. -*/ -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <asm/io.h> - -#include <linux/mtd/map.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#define WINDOW_START 0xb0000 -/* Number of bits in offset. */ -#define WINDOW_SHIFT 15 -#define WINDOW_LENGTH (1 << WINDOW_SHIFT) -/* The bits for the offset into the window. */ -#define WINDOW_MASK (WINDOW_LENGTH-1) -#define PAGE_IO 0x22 -#define PAGE_IO_SIZE 2 - -static volatile int page_in_window = -1; // Current page in window. -static void __iomem *iomapadr; -static DEFINE_SPINLOCK(elan_104nc_spin); - -/* partition_info gives details on the logical partitions that the split the - * single flash device into. If the size if zero we use up to the end of the - * device. */ -static struct mtd_partition partition_info[]={ - { .name = "ELAN-104NC flash boot partition", - .offset = 0, - .size = 640*1024 }, - { .name = "ELAN-104NC flash partition 1", - .offset = 640*1024, - .size = 896*1024 }, - { .name = "ELAN-104NC flash partition 2", - .offset = (640+896)*1024 } -}; -#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0])) - -/* - * If no idea what is going on here. This is taken from the FlashFX stuff. - */ -#define ROMCS 1 - -static inline void elan_104nc_setup(void) -{ - u16 t; - - outw( 0x0023 + ROMCS*2, PAGE_IO ); - t=inb( PAGE_IO+1 ); - - t=(t & 0xf9) | 0x04; - - outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO ); -} - -static inline void elan_104nc_page(struct map_info *map, unsigned long ofs) -{ - unsigned long page = ofs >> WINDOW_SHIFT; - - if( page!=page_in_window ) { - int cmd1; - int cmd2; - - cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000; - cmd2=((page & 0xff) << 8) + 0x0032; - - outw( cmd1, PAGE_IO ); - outw( cmd2, PAGE_IO ); - - page_in_window = page; - } -} - - -static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs) -{ - map_word ret; - spin_lock(&elan_104nc_spin); - elan_104nc_page(map, ofs); - ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK)); - spin_unlock(&elan_104nc_spin); - return ret; -} - -static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - while (len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(from & WINDOW_MASK); - - spin_lock(&elan_104nc_spin); - elan_104nc_page(map, from); - memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen); - spin_unlock(&elan_104nc_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr) -{ - spin_lock(&elan_104nc_spin); - elan_104nc_page(map, adr); - writew(d.x[0], iomapadr + (adr & WINDOW_MASK)); - spin_unlock(&elan_104nc_spin); -} - -static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - while(len) { - unsigned long thislen = len; - if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) - thislen = WINDOW_LENGTH-(to & WINDOW_MASK); - - spin_lock(&elan_104nc_spin); - elan_104nc_page(map, to); - memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen); - spin_unlock(&elan_104nc_spin); - to += thislen; - from += thislen; - len -= thislen; - } -} - -static struct map_info elan_104nc_map = { - .name = "ELAN-104NC flash", - .phys = NO_XIP, - .size = 8*1024*1024, /* this must be set to a maximum possible amount - of flash so the cfi probe routines find all - the chips */ - .bankwidth = 2, - .read = elan_104nc_read16, - .copy_from = elan_104nc_copy_from, - .write = elan_104nc_write16, - .copy_to = elan_104nc_copy_to -}; - -/* MTD device for all of the flash. */ -static struct mtd_info *all_mtd; - -static void cleanup_elan_104nc(void) -{ - if( all_mtd ) { - del_mtd_partitions( all_mtd ); - map_destroy( all_mtd ); - } - - iounmap(iomapadr); -} - -static int __init init_elan_104nc(void) -{ - /* Urg! We use I/O port 0x22 without request_region()ing it, - because it's already allocated to the PIC. */ - - iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH); - if (!iomapadr) { - printk( KERN_ERR"%s: failed to ioremap memory region\n", - elan_104nc_map.name ); - return -EIO; - } - - printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n", - elan_104nc_map.name, - PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1, - WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 ); - - elan_104nc_setup(); - - /* Probe for chip. */ - all_mtd = do_map_probe("cfi_probe", &elan_104nc_map ); - if( !all_mtd ) { - cleanup_elan_104nc(); - return -ENXIO; - } - - all_mtd->owner = THIS_MODULE; - - /* Create MTD devices for each partition. */ - add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS ); - - return 0; -} - -module_init(init_elan_104nc); -module_exit(cleanup_elan_104nc); - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Arcom Control Systems Ltd."); -MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC"); |