summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/tmio_mmc_pio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/tmio_mmc_pio.c')
-rw-r--r--drivers/mmc/host/tmio_mmc_pio.c132
1 files changed, 96 insertions, 36 deletions
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 9a7996ade58e..0d8a9bbe30be 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -34,8 +34,9 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/mfd/tmio.h>
-#include <linux/mmc/cd-gpio.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/mmc/tmio.h>
#include <linux/module.h>
#include <linux/pagemap.h>
@@ -305,8 +306,8 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
int c = cmd->opcode;
u32 irq_mask = TMIO_MASK_CMD;
- /* Command 12 is handled by hardware */
- if (cmd->opcode == 12 && !cmd->arg) {
+ /* CMD12 is handled by hardware */
+ if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
return 0;
}
@@ -449,7 +450,7 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
}
if (stop) {
- if (stop->opcode == 12 && !stop->arg)
+ if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg)
sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
else
BUG();
@@ -751,6 +752,34 @@ fail:
mmc_request_done(mmc, mrq);
}
+static int tmio_mmc_clk_update(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct tmio_mmc_data *pdata = host->pdata;
+ int ret;
+
+ if (!pdata->clk_enable)
+ return -ENOTSUPP;
+
+ ret = pdata->clk_enable(host->pdev, &mmc->f_max);
+ if (!ret)
+ mmc->f_min = mmc->f_max / 512;
+
+ return ret;
+}
+
+static void tmio_mmc_set_power(struct tmio_mmc_host *host, struct mmc_ios *ios)
+{
+ struct mmc_host *mmc = host->mmc;
+
+ if (host->set_pwr)
+ host->set_pwr(host->pdev, ios->power_mode != MMC_POWER_OFF);
+ if (!IS_ERR(mmc->supply.vmmc))
+ /* Errors ignored... */
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+ ios->power_mode ? ios->vdd : 0);
+}
+
/* Set MMC clock / power.
* Note: This controller uses a simple divider scheme therefore it cannot
* run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
@@ -797,32 +826,37 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
*/
if (ios->power_mode == MMC_POWER_ON && ios->clock) {
if (!host->power) {
+ tmio_mmc_clk_update(mmc);
pm_runtime_get_sync(dev);
host->power = true;
}
tmio_mmc_set_clock(host, ios->clock);
/* power up SD bus */
- if (host->set_pwr)
- host->set_pwr(host->pdev, 1);
+ tmio_mmc_set_power(host, ios);
/* start bus clock */
tmio_mmc_clk_start(host);
} else if (ios->power_mode != MMC_POWER_UP) {
- if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
- host->set_pwr(host->pdev, 0);
+ if (ios->power_mode == MMC_POWER_OFF)
+ tmio_mmc_set_power(host, ios);
if (host->power) {
+ struct tmio_mmc_data *pdata = host->pdata;
+ tmio_mmc_clk_stop(host);
host->power = false;
pm_runtime_put(dev);
+ if (pdata->clk_disable)
+ pdata->clk_disable(host->pdev);
}
- tmio_mmc_clk_stop(host);
}
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_1:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
- break;
- case MMC_BUS_WIDTH_4:
- sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
- break;
+ if (host->power) {
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+ break;
+ case MMC_BUS_WIDTH_4:
+ sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+ break;
+ }
}
/* Let things settle. delay taken from winCE driver */
@@ -841,6 +875,9 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
+ int ret = mmc_gpio_get_ro(mmc);
+ if (ret >= 0)
+ return ret;
return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
@@ -850,6 +887,9 @@ static int tmio_mmc_get_cd(struct mmc_host *mmc)
{
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
+ int ret = mmc_gpio_get_cd(mmc);
+ if (ret >= 0)
+ return ret;
if (!pdata->get_cd)
return -ENOSYS;
@@ -865,6 +905,19 @@ static const struct mmc_host_ops tmio_mmc_ops = {
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
};
+static void tmio_mmc_init_ocr(struct tmio_mmc_host *host)
+{
+ struct tmio_mmc_data *pdata = host->pdata;
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_get_supply(mmc);
+
+ if (!mmc->ocr_avail)
+ mmc->ocr_avail = pdata->ocr_mask ? : MMC_VDD_32_33 | MMC_VDD_33_34;
+ else if (pdata->ocr_mask)
+ dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+}
+
int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
struct platform_device *pdev,
struct tmio_mmc_data *pdata)
@@ -904,18 +957,14 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
mmc->ops = &tmio_mmc_ops;
mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
- mmc->f_max = pdata->hclk;
- mmc->f_min = mmc->f_max / 512;
+ mmc->caps2 = pdata->capabilities2;
mmc->max_segs = 32;
mmc->max_blk_size = 512;
mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
mmc->max_segs;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- if (pdata->ocr_mask)
- mmc->ocr_avail = pdata->ocr_mask;
- else
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ tmio_mmc_init_ocr(_host);
_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
@@ -927,6 +976,11 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
if (ret < 0)
goto pm_disable;
+ if (tmio_mmc_clk_update(mmc) < 0) {
+ mmc->f_max = pdata->hclk;
+ mmc->f_min = mmc->f_max / 512;
+ }
+
/*
* There are 4 different scenarios for the card detection:
* 1) an external gpio irq handles the cd (best for power savings)
@@ -937,7 +991,6 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
* While we increment the runtime PM counter for all scenarios when
* the mmc core activates us by calling an appropriate set_ios(), we
* must additionally ensure that in case 2) the tmio mmc hardware stays
- * additionally ensure that in case 2) the tmio mmc hardware stays
* powered on during runtime for the card detection to work.
*/
if (_host->native_hotplug)
@@ -948,6 +1001,17 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
_host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
+
+ /* Unmask the IRQs we want to know about */
+ if (!_host->chan_rx)
+ irq_mask |= TMIO_MASK_READOP;
+ if (!_host->chan_tx)
+ irq_mask |= TMIO_MASK_WRITEOP;
+ if (!_host->native_hotplug)
+ irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
+
+ _host->sdcard_irq_mask &= ~irq_mask;
+
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
tmio_mmc_enable_sdio_irq(mmc, 0);
@@ -961,22 +1025,18 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
/* See if we also get DMA */
tmio_mmc_request_dma(_host, pdata);
- mmc_add_host(mmc);
+ ret = mmc_add_host(mmc);
+ if (pdata->clk_disable)
+ pdata->clk_disable(pdev);
+ if (ret < 0) {
+ tmio_mmc_host_remove(_host);
+ return ret;
+ }
dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
- /* Unmask the IRQs we want to know about */
- if (!_host->chan_rx)
- irq_mask |= TMIO_MASK_READOP;
- if (!_host->chan_tx)
- irq_mask |= TMIO_MASK_WRITEOP;
- if (!_host->native_hotplug)
- irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
- tmio_mmc_enable_mmc_irqs(_host, irq_mask);
-
if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
- ret = mmc_cd_gpio_request(mmc, pdata->cd_gpio);
+ ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio);
if (ret < 0) {
tmio_mmc_host_remove(_host);
return ret;
@@ -1008,7 +1068,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host)
* This means we can miss a card-eject, but this is anyway
* possible, because of delayed processing of hotplug events.
*/
- mmc_cd_gpio_free(mmc);
+ mmc_gpio_free_cd(mmc);
if (!host->native_hotplug)
pm_runtime_get_sync(&pdev->dev);
OpenPOWER on IntegriCloud