diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 80 |
1 files changed, 73 insertions, 7 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4dc0028086a3..ae57769ba50d 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -32,6 +32,15 @@ /* VENDOR SPEC register */ #define SDHCI_VENDOR_SPEC 0xC0 #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 +#define SDHCI_MIX_CTRL 0x48 + +/* + * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC: + * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design, + * but bit28 is used as the INT DMA ERR in fsl eSDHC design. + * Define this macro DMA error INT for fsl eSDHC + */ +#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000 /* * The CMDTYPE of the CMD register (offset 0xE) should be set to @@ -51,6 +60,7 @@ enum imx_esdhc_type { IMX35_ESDHC, IMX51_ESDHC, IMX53_ESDHC, + IMX6Q_USDHC, }; struct pltfm_imx_data { @@ -74,6 +84,9 @@ static struct platform_device_id imx_esdhc_devtype[] = { .name = "sdhci-esdhc-imx53", .driver_data = IMX53_ESDHC, }, { + .name = "sdhci-usdhc-imx6q", + .driver_data = IMX6Q_USDHC, + }, { /* sentinel */ } }; @@ -84,6 +97,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], }, { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], }, { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], }, + { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); @@ -108,6 +122,11 @@ static inline int is_imx53_esdhc(struct pltfm_imx_data *data) return data->devtype == IMX53_ESDHC; } +static inline int is_imx6q_usdhc(struct pltfm_imx_data *data) +{ + return data->devtype == IMX6Q_USDHC; +} + static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~0x3); @@ -135,6 +154,27 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) val |= SDHCI_CARD_PRESENT; } + if (unlikely(reg == SDHCI_CAPABILITIES)) { + /* In FSL esdhc IC module, only bit20 is used to indicate the + * ADMA2 capability of esdhc, but this bit is messed up on + * some SOCs (e.g. on MX25, MX35 this bit is set, but they + * don't actually support ADMA2). So set the BROKEN_ADMA + * uirk on MX25/35 platforms. + */ + + if (val & SDHCI_CAN_DO_ADMA1) { + val &= ~SDHCI_CAN_DO_ADMA1; + val |= SDHCI_CAN_DO_ADMA2; + } + } + + if (unlikely(reg == SDHCI_INT_STATUS)) { + if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) { + val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR; + val |= SDHCI_INT_ADMA_ERROR; + } + } + return val; } @@ -179,13 +219,28 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); } + if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { + if (val & SDHCI_INT_ADMA_ERROR) { + val &= ~SDHCI_INT_ADMA_ERROR; + val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR; + } + } + writel(val, host->ioaddr + reg); } static u16 esdhc_readw_le(struct sdhci_host *host, int reg) { - if (unlikely(reg == SDHCI_HOST_VERSION)) - reg ^= 2; + if (unlikely(reg == SDHCI_HOST_VERSION)) { + u16 val = readw(host->ioaddr + (reg ^ 2)); + /* + * uSDHC supports SDHCI v3.0, but it's encoded as value + * 0x3 in host controller version register, which violates + * SDHCI_SPEC_300 definition. Work it around here. + */ + if ((val & SDHCI_SPEC_VER_MASK) == 3) + return --val; + } return readw(host->ioaddr + reg); } @@ -216,8 +271,17 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; - writel(val << 16 | imx_data->scratchpad, - host->ioaddr + SDHCI_TRANSFER_MODE); + + if (is_imx6q_usdhc(imx_data)) { + u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL); + m = imx_data->scratchpad | (m & 0xffff0000); + writel(m, host->ioaddr + SDHCI_MIX_CTRL); + writel(val << 16, + host->ioaddr + SDHCI_TRANSFER_MODE); + } else { + writel(val << 16 | imx_data->scratchpad, + host->ioaddr + SDHCI_TRANSFER_MODE); + } return; case SDHCI_BLOCK_SIZE: val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); @@ -311,9 +375,10 @@ static struct sdhci_ops sdhci_esdhc_ops = { }; static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC + | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | SDHCI_QUIRK_BROKEN_CARD_DETECTION, - /* ADMA has issues. Might be fixable */ .ops = &sdhci_esdhc_ops, }; @@ -405,7 +470,8 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data)) /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */ - host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK; + host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK + | SDHCI_QUIRK_BROKEN_ADMA; if (is_imx53_esdhc(imx_data)) imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; |
