summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/dw_mmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/dw_mmc.c')
-rw-r--r--drivers/mmc/host/dw_mmc.c74
1 files changed, 71 insertions, 3 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 50da6e330a15..acefdeb2465b 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -529,6 +529,47 @@ static void dw_mci_post_req(struct mmc_host *mmc,
data->host_cookie = 0;
}
+static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
+{
+#ifdef CONFIG_MMC_DW_IDMAC
+ unsigned int blksz = data->blksz;
+ const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
+ u32 fifo_width = 1 << host->data_shift;
+ u32 blksz_depth = blksz / fifo_width, fifoth_val;
+ u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
+ int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
+
+ tx_wmark = (host->fifo_depth) / 2;
+ tx_wmark_invers = host->fifo_depth - tx_wmark;
+
+ /*
+ * MSIZE is '1',
+ * if blksz is not a multiple of the FIFO width
+ */
+ if (blksz % fifo_width) {
+ msize = 0;
+ rx_wmark = 1;
+ goto done;
+ }
+
+ do {
+ if (!((blksz_depth % mszs[idx]) ||
+ (tx_wmark_invers % mszs[idx]))) {
+ msize = idx;
+ rx_wmark = mszs[idx] - 1;
+ break;
+ }
+ } while (--idx > 0);
+ /*
+ * If idx is '0', it won't be tried
+ * Thus, initial values are uesed
+ */
+done:
+ fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
+ mci_writel(host, FIFOTH, fifoth_val);
+#endif
+}
+
static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
{
int sg_len;
@@ -553,6 +594,14 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
(unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
sg_len);
+ /*
+ * Decide the MSIZE and RX/TX Watermark.
+ * If current block size is same with previous size,
+ * no need to update fifoth.
+ */
+ if (host->prev_blksz != data->blksz)
+ dw_mci_adjust_fifoth(host, data);
+
/* Enable the DMA interface */
temp = mci_readl(host, CTRL);
temp |= SDMMC_CTRL_DMA_ENABLE;
@@ -603,6 +652,21 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
temp = mci_readl(host, CTRL);
temp &= ~SDMMC_CTRL_DMA_ENABLE;
mci_writel(host, CTRL, temp);
+
+ /*
+ * Use the initial fifoth_val for PIO mode.
+ * If next issued data may be transfered by DMA mode,
+ * prev_blksz should be invalidated.
+ */
+ mci_writel(host, FIFOTH, host->fifoth_val);
+ host->prev_blksz = 0;
+ } else {
+ /*
+ * Keep the current block size.
+ * It will be used to decide whether to update
+ * fifoth register next time.
+ */
+ host->prev_blksz = data->blksz;
}
}
@@ -2368,8 +2432,8 @@ int dw_mci_probe(struct dw_mci *host)
fifo_size = host->pdata->fifo_depth;
}
host->fifo_depth = fifo_size;
- host->fifoth_val = ((0x2 << 28) | ((fifo_size/2 - 1) << 16) |
- ((fifo_size/2) << 0));
+ host->fifoth_val =
+ SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
mci_writel(host, FIFOTH, host->fifoth_val);
/* disable clock to CIU */
@@ -2552,8 +2616,12 @@ int dw_mci_resume(struct dw_mci *host)
if (host->use_dma && host->dma_ops->init)
host->dma_ops->init(host);
- /* Restore the old value at FIFOTH register */
+ /*
+ * Restore the initial value at FIFOTH register
+ * And Invalidate the prev_blksz with zero
+ */
mci_writel(host, FIFOTH, host->fifoth_val);
+ host->prev_blksz = 0;
/* Put in max timeout */
mci_writel(host, TMOUT, 0xFFFFFFFF);
OpenPOWER on IntegriCloud