diff options
Diffstat (limited to 'drivers/mfd/db8500-prcmu.c')
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 2069 |
1 files changed, 2069 insertions, 0 deletions
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c new file mode 100644 index 000000000000..e63782107e2f --- /dev/null +++ b/drivers/mfd/db8500-prcmu.c @@ -0,0 +1,2069 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * + * U8500 PRCM Unit interface driver + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/irq.h> +#include <linux/jiffies.h> +#include <linux/bitops.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/mfd/core.h> +#include <linux/mfd/db8500-prcmu.h> +#include <linux/regulator/db8500-prcmu.h> +#include <linux/regulator/machine.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/db8500-regs.h> +#include <mach/id.h> +#include "db8500-prcmu-regs.h" + +/* Offset for the firmware version within the TCPM */ +#define PRCMU_FW_VERSION_OFFSET 0xA4 + +/* PRCMU project numbers, defined by PRCMU FW */ +#define PRCMU_PROJECT_ID_8500V1_0 1 +#define PRCMU_PROJECT_ID_8500V2_0 2 +#define PRCMU_PROJECT_ID_8400V2_0 3 + +/* Index of different voltages to be used when accessing AVSData */ +#define PRCM_AVS_BASE 0x2FC +#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) +#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1) +#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2) +#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3) +#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4) +#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5) +#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6) +#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7) +#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8) +#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9) +#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA) +#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB) +#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC) + +#define PRCM_AVS_VOLTAGE 0 +#define PRCM_AVS_VOLTAGE_MASK 0x3f +#define PRCM_AVS_ISSLOWSTARTUP 6 +#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP) +#define PRCM_AVS_ISMODEENABLE 7 +#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) + +#define PRCM_BOOT_STATUS 0xFFF +#define PRCM_ROMCODE_A2P 0xFFE +#define PRCM_ROMCODE_P2A 0xFFD +#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */ + +#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */ + +#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */ +#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0) +#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1) +#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2) +#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3) +#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4) +#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5) +#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8) + +/* Req Mailboxes */ +#define PRCM_REQ_MB0 0xFDC /* 12 bytes */ +#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */ +#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */ +#define PRCM_REQ_MB3 0xE4C /* 372 bytes */ +#define PRCM_REQ_MB4 0xE48 /* 4 bytes */ +#define PRCM_REQ_MB5 0xE44 /* 4 bytes */ + +/* Ack Mailboxes */ +#define PRCM_ACK_MB0 0xE08 /* 52 bytes */ +#define PRCM_ACK_MB1 0xE04 /* 4 bytes */ +#define PRCM_ACK_MB2 0xE00 /* 4 bytes */ +#define PRCM_ACK_MB3 0xDFC /* 4 bytes */ +#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */ +#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */ + +/* Mailbox 0 headers */ +#define MB0H_POWER_STATE_TRANS 0 +#define MB0H_CONFIG_WAKEUPS_EXE 1 +#define MB0H_READ_WAKEUP_ACK 3 +#define MB0H_CONFIG_WAKEUPS_SLEEP 4 + +#define MB0H_WAKEUP_EXE 2 +#define MB0H_WAKEUP_SLEEP 5 + +/* Mailbox 0 REQs */ +#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0) +#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1) +#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2) +#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3) +#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4) +#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8) + +/* Mailbox 0 ACKs */ +#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0) +#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1) +#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4) +#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8) +#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C) +#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20) +#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20 + +/* Mailbox 1 headers */ +#define MB1H_ARM_APE_OPP 0x0 +#define MB1H_RESET_MODEM 0x2 +#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3 +#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4 +#define MB1H_RELEASE_USB_WAKEUP 0x5 + +/* Mailbox 1 Requests */ +#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) +#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) +#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4) +#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8) + +/* Mailbox 1 ACKs */ +#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0) +#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1) +#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2) +#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3) + +/* Mailbox 2 headers */ +#define MB2H_DPS 0x0 +#define MB2H_AUTO_PWR 0x1 + +/* Mailbox 2 REQs */ +#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0) +#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1) +#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2) +#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3) +#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4) +#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5) +#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6) +#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7) +#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8) +#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC) + +/* Mailbox 2 ACKs */ +#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0) +#define HWACC_PWR_ST_OK 0xFE + +/* Mailbox 3 headers */ +#define MB3H_ANC 0x0 +#define MB3H_SIDETONE 0x1 +#define MB3H_SYSCLK 0xE + +/* Mailbox 3 Requests */ +#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0) +#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20) +#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60) +#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64) +#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68) +#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C) +#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C) + +/* Mailbox 4 headers */ +#define MB4H_DDR_INIT 0x0 +#define MB4H_MEM_ST 0x1 +#define MB4H_HOTDOG 0x12 +#define MB4H_HOTMON 0x13 +#define MB4H_HOT_PERIOD 0x14 + +/* Mailbox 4 Requests */ +#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3) +#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2) +#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0) +#define HOTMON_CONFIG_LOW BIT(0) +#define HOTMON_CONFIG_HIGH BIT(1) + +/* Mailbox 5 Requests */ +#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0) +#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1) +#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2) +#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3) +#define PRCMU_I2C_WRITE(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_STOP_EN BIT(3) + +/* Mailbox 5 ACKs */ +#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1) +#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3) +#define I2C_WR_OK 0x1 +#define I2C_RD_OK 0x2 + +#define NUM_MB 8 +#define MBOX_BIT BIT +#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1) + +/* + * Wakeups/IRQs + */ + +#define WAKEUP_BIT_RTC BIT(0) +#define WAKEUP_BIT_RTT0 BIT(1) +#define WAKEUP_BIT_RTT1 BIT(2) +#define WAKEUP_BIT_HSI0 BIT(3) +#define WAKEUP_BIT_HSI1 BIT(4) +#define WAKEUP_BIT_CA_WAKE BIT(5) +#define WAKEUP_BIT_USB BIT(6) +#define WAKEUP_BIT_ABB BIT(7) +#define WAKEUP_BIT_ABB_FIFO BIT(8) +#define WAKEUP_BIT_SYSCLK_OK BIT(9) +#define WAKEUP_BIT_CA_SLEEP BIT(10) +#define WAKEUP_BIT_AC_WAKE_ACK BIT(11) +#define WAKEUP_BIT_SIDE_TONE_OK BIT(12) +#define WAKEUP_BIT_ANC_OK BIT(13) +#define WAKEUP_BIT_SW_ERROR BIT(14) +#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15) +#define WAKEUP_BIT_ARM BIT(17) +#define WAKEUP_BIT_HOTMON_LOW BIT(18) +#define WAKEUP_BIT_HOTMON_HIGH BIT(19) +#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20) +#define WAKEUP_BIT_GPIO0 BIT(23) +#define WAKEUP_BIT_GPIO1 BIT(24) +#define WAKEUP_BIT_GPIO2 BIT(25) +#define WAKEUP_BIT_GPIO3 BIT(26) +#define WAKEUP_BIT_GPIO4 BIT(27) +#define WAKEUP_BIT_GPIO5 BIT(28) +#define WAKEUP_BIT_GPIO6 BIT(29) +#define WAKEUP_BIT_GPIO7 BIT(30) +#define WAKEUP_BIT_GPIO8 BIT(31) + +/* + * This vector maps irq numbers to the bits in the bit field used in + * communication with the PRCMU firmware. + * + * The reason for having this is to keep the irq numbers contiguous even though + * the bits in the bit field are not. (The bits also have a tendency to move + * around, to further complicate matters.) + */ +#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE) +#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name) +static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = { + IRQ_ENTRY(RTC), + IRQ_ENTRY(RTT0), + IRQ_ENTRY(RTT1), + IRQ_ENTRY(HSI0), + IRQ_ENTRY(HSI1), + IRQ_ENTRY(CA_WAKE), + IRQ_ENTRY(USB), + IRQ_ENTRY(ABB), + IRQ_ENTRY(ABB_FIFO), + IRQ_ENTRY(CA_SLEEP), + IRQ_ENTRY(ARM), + IRQ_ENTRY(HOTMON_LOW), + IRQ_ENTRY(HOTMON_HIGH), + IRQ_ENTRY(MODEM_SW_RESET_REQ), + IRQ_ENTRY(GPIO0), + IRQ_ENTRY(GPIO1), + IRQ_ENTRY(GPIO2), + IRQ_ENTRY(GPIO3), + IRQ_ENTRY(GPIO4), + IRQ_ENTRY(GPIO5), + IRQ_ENTRY(GPIO6), + IRQ_ENTRY(GPIO7), + IRQ_ENTRY(GPIO8) +}; + +#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1) +#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name) +static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = { + WAKEUP_ENTRY(RTC), + WAKEUP_ENTRY(RTT0), + WAKEUP_ENTRY(RTT1), + WAKEUP_ENTRY(HSI0), + WAKEUP_ENTRY(HSI1), + WAKEUP_ENTRY(USB), + WAKEUP_ENTRY(ABB), + WAKEUP_ENTRY(ABB_FIFO), + WAKEUP_ENTRY(ARM) +}; + +/* + * mb0_transfer - state needed for mailbox 0 communication. + * @lock: The transaction lock. + * @dbb_events_lock: A lock used to handle concurrent access to (parts of) + * the request data. + * @mask_work: Work structure used for (un)masking wakeup interrupts. + * @req: Request data that need to persist between requests. + */ +static struct { + spinlock_t lock; + spinlock_t dbb_irqs_lock; + struct work_struct mask_work; + struct mutex ac_wake_lock; + struct completion ac_wake_work; + struct { + u32 dbb_irqs; + u32 dbb_wakeups; + u32 abb_events; + } req; +} mb0_transfer; + +/* + * mb1_transfer - state needed for mailbox 1 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + struct { + u8 header; + u8 arm_opp; + u8 ape_opp; + u8 ape_voltage_status; + } ack; +} mb1_transfer; + +/* + * mb2_transfer - state needed for mailbox 2 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @auto_pm_lock: The autonomous power management configuration lock. + * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled. + * @req: Request data that need to persist between requests. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + spinlock_t auto_pm_lock; + bool auto_pm_enabled; + struct { + u8 status; + } ack; +} mb2_transfer; + +/* + * mb3_transfer - state needed for mailbox 3 communication. + * @lock: The request lock. + * @sysclk_lock: A lock used to handle concurrent sysclk requests. + * @sysclk_work: Work structure used for sysclk requests. + */ +static struct { + spinlock_t lock; + struct mutex sysclk_lock; + struct completion sysclk_work; +} mb3_transfer; + +/* + * mb4_transfer - state needed for mailbox 4 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + */ +static struct { + struct mutex lock; + struct completion work; +} mb4_transfer; + +/* + * mb5_transfer - state needed for mailbox 5 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +static atomic_t ac_wake_req_state = ATOMIC_INIT(0); + +/* Spinlocks */ +static DEFINE_SPINLOCK(clkout_lock); +static DEFINE_SPINLOCK(gpiocr_lock); + +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; + +struct clk_mgt { + unsigned int offset; + u32 pllsw; +}; + +static DEFINE_SPINLOCK(clk_mgt_lock); + +#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 } +struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { + CLK_MGT_ENTRY(SGACLK), + CLK_MGT_ENTRY(UARTCLK), + CLK_MGT_ENTRY(MSP02CLK), + CLK_MGT_ENTRY(MSP1CLK), + CLK_MGT_ENTRY(I2CCLK), + CLK_MGT_ENTRY(SDMMCCLK), + CLK_MGT_ENTRY(SLIMCLK), + CLK_MGT_ENTRY(PER1CLK), + CLK_MGT_ENTRY(PER2CLK), + CLK_MGT_ENTRY(PER3CLK), + CLK_MGT_ENTRY(PER5CLK), + CLK_MGT_ENTRY(PER6CLK), + CLK_MGT_ENTRY(PER7CLK), + CLK_MGT_ENTRY(LCDCLK), + CLK_MGT_ENTRY(BMLCLK), + CLK_MGT_ENTRY(HSITXCLK), + CLK_MGT_ENTRY(HSIRXCLK), + CLK_MGT_ENTRY(HDMICLK), + CLK_MGT_ENTRY(APEATCLK), + CLK_MGT_ENTRY(APETRACECLK), + CLK_MGT_ENTRY(MCDECLK), + CLK_MGT_ENTRY(IPI2CCLK), + CLK_MGT_ENTRY(DSIALTCLK), + CLK_MGT_ENTRY(DMACLK), + CLK_MGT_ENTRY(B2R2CLK), + CLK_MGT_ENTRY(TVCLK), + CLK_MGT_ENTRY(SSPCLK), + CLK_MGT_ENTRY(RNGCLK), + CLK_MGT_ENTRY(UICCCLK), +}; + +/* +* Used by MCDE to setup all necessary PRCMU registers +*/ +#define PRCMU_RESET_DSIPLL 0x00004000 +#define PRCMU_UNCLAMP_DSIPLL 0x00400800 + +#define PRCMU_CLK_PLL_DIV_SHIFT 0 +#define PRCMU_CLK_PLL_SW_SHIFT 5 +#define PRCMU_CLK_38 (1 << 9) +#define PRCMU_CLK_38_SRC (1 << 10) +#define PRCMU_CLK_38_DIV (1 << 11) + +/* PLLDIV=12, PLLSW=4 (PLLDDR) */ +#define PRCMU_DSI_CLOCK_SETTING 0x0000008C + +/* PLLDIV=8, PLLSW=4 (PLLDDR) */ +#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088 + +/* DPI 50000000 Hz */ +#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \ + (16 << PRCMU_CLK_PLL_DIV_SHIFT)) +#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00 + +/* D=101, N=1, R=4, SELDIV2=0 */ +#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165 + +/* D=70, N=1, R=3, SELDIV2=0 */ +#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146 + +#define PRCMU_ENABLE_PLLDSI 0x00000001 +#define PRCMU_DISABLE_PLLDSI 0x00000000 +#define PRCMU_RELEASE_RESET_DSS 0x0000400C +#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202 +/* ESC clk, div0=1, div1=1, div2=3 */ +#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101 +#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101 +#define PRCMU_DSI_RESET_SW 0x00000007 + +#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 + +static struct { + u8 project_number; + u8 api_version; + u8 func_version; + u8 errata; +} prcmu_version; + + +int prcmu_enable_dsipll(void) +{ + int i; + unsigned int plldsifreq; + + /* Clear DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR)); + /* Unclamp DSIPLL in/out */ + writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR)); + + if (prcmu_is_u8400()) + plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; + else + plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; + /* Set DSI PLL FREQ */ + writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ)); + writel(PRCMU_DSI_PLLOUT_SEL_SETTING, + (_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL)); + /* Enable Escape clocks */ + writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, + (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + + /* Start DSI PLL */ + writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + /* Reset DSI PLL */ + writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET)); + for (i = 0; i < 10; i++) { + if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) & + PRCMU_PLLDSI_LOCKP_LOCKED) + == PRCMU_PLLDSI_LOCKP_LOCKED) + break; + udelay(100); + } + /* Set DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET)); + return 0; +} + +int prcmu_disable_dsipll(void) +{ + /* Disable dsi pll */ + writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + /* Disable escapeclock */ + writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, + (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + return 0; +} + +int prcmu_set_display_clocks(void) +{ + unsigned long flags; + unsigned int dsiclk; + + if (prcmu_is_u8400()) + dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400; + else + dsiclk = PRCMU_DSI_CLOCK_SETTING; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT)); + writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT)); + writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. + */ +void prcmu_enable_spi2(void) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpiocr_lock, flags); + reg = readl(_PRCMU_BASE + PRCM_GPIOCR); + writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + spin_unlock_irqrestore(&gpiocr_lock, flags); +} + +/** + * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. + */ +void prcmu_disable_spi2(void) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpiocr_lock, flags); + reg = readl(_PRCMU_BASE + PRCM_GPIOCR); + writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + spin_unlock_irqrestore(&gpiocr_lock, flags); +} + +bool prcmu_has_arm_maxopp(void) +{ + return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & + PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; +} + +bool prcmu_is_u8400(void) +{ + return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0; +} + +/** + * prcmu_get_boot_status - PRCMU boot status checking + * Returns: the current PRCMU boot status + */ +int prcmu_get_boot_status(void) +{ + return readb(tcdm_base + PRCM_BOOT_STATUS); +} + +/** + * prcmu_set_rc_a2p - This function is used to run few power state sequences + * @val: Value to be set, i.e. transition requested + * Returns: 0 on success, -EINVAL on invalid argument + * + * This function is used to run the following power state sequences - + * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep + */ +int prcmu_set_rc_a2p(enum romcode_write val) +{ + if (val < RDY_2_DS || val > RDY_2_XP70_RST) + return -EINVAL; + writeb(val, (tcdm_base + PRCM_ROMCODE_A2P)); + return 0; +} + +/** + * prcmu_get_rc_p2a - This function is used to get power state sequences + * Returns: the power transition that has last happened + * + * This function can return the following transitions- + * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep + */ +enum romcode_read prcmu_get_rc_p2a(void) +{ + return readb(tcdm_base + PRCM_ROMCODE_P2A); +} + +/** + * prcmu_get_current_mode - Return the current XP70 power mode + * Returns: Returns the current AP(ARM) power mode: init, + * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset + */ +enum ap_pwrst prcmu_get_xp70_current_state(void) +{ + return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE); +} + +/** + * prcmu_config_clkout - Configure one of the programmable clock outputs. + * @clkout: The CLKOUT number (0 or 1). + * @source: The clock to be used (one of the PRCMU_CLKSRC_*). + * @div: The divider to be applied. + * + * Configures one of the programmable clock outputs (CLKOUTs). + * @div should be in the range [1,63] to request a configuration, or 0 to + * inform that the configuration is no longer requested. + */ +int prcmu_config_clkout(u8 clkout, u8 source, u8 div) +{ + static int requests[2]; + int r = 0; + unsigned long flags; + u32 val; + u32 bits; + u32 mask; + u32 div_mask; + + BUG_ON(clkout > 1); + BUG_ON(div > 63); + BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009)); + + if (!div && !requests[clkout]) + return -EINVAL; + + switch (clkout) { + case 0: + div_mask = PRCM_CLKOCR_CLKODIV0_MASK; + mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK); + bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) | + (div << PRCM_CLKOCR_CLKODIV0_SHIFT)); + break; + case 1: + div_mask = PRCM_CLKOCR_CLKODIV1_MASK; + mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK | + PRCM_CLKOCR_CLK1TYPE); + bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) | + (div << PRCM_CLKOCR_CLKODIV1_SHIFT)); + break; + } + bits &= mask; + + spin_lock_irqsave(&clkout_lock, flags); + + val = readl(_PRCMU_BASE + PRCM_CLKOCR); + if (val & div_mask) { + if (div) { + if ((val & mask) != bits) { + r = -EBUSY; + goto unlock_and_return; + } + } else { + if ((val & mask & ~div_mask) != bits) { + r = -EINVAL; + goto unlock_and_return; + } + } + } + writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR)); + requests[clkout] += (div ? 1 : -1); + +unlock_and_return: + spin_unlock_irqrestore(&clkout_lock, flags); + + return r; +} + +int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) +{ + unsigned long flags; + + BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state)); + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE)); + writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE)); + writeb((keep_ulp_clk ? 1 : 0), + (tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE)); + writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); + + return 0; +} + +/* This function should only be called while mb0_transfer.lock is held. */ +static void config_wakeups(void) +{ + const u8 header[2] = { + MB0H_CONFIG_WAKEUPS_EXE, + MB0H_CONFIG_WAKEUPS_SLEEP + }; + static u32 last_dbb_events; + static u32 last_abb_events; + u32 dbb_events; + u32 abb_events; + unsigned int i; + + dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups; + dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK); + + abb_events = mb0_transfer.req.abb_events; + + if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events)) + return; + + for (i = 0; i < 2; i++) { + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500)); + writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500)); + writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + } + last_dbb_events = dbb_events; + last_abb_events = abb_events; +} + +void prcmu_enable_wakeups(u32 wakeups) +{ + unsigned long flags; + u32 bits; + int i; + + BUG_ON(wakeups != (wakeups & VALID_WAKEUPS)); + + for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) { + if (wakeups & BIT(i)) + bits |= prcmu_wakeup_bit[i]; + } + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + mb0_transfer.req.dbb_wakeups = bits; + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +void prcmu_config_abb_event_readout(u32 abb_events) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + mb0_transfer.req.abb_events = abb_events; + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +void prcmu_get_abb_event_buffer(void __iomem **buf) +{ + if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) + *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500); + else + *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500); +} + +/** + * prcmu_set_arm_opp - set the appropriate ARM OPP + * @opp: The new ARM operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the the operating point of the ARM. + */ +int prcmu_set_arm_opp(u8 opp) +{ + int r; + + if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK) + return -EINVAL; + + r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); + writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || + (mb1_transfer.ack.arm_opp != opp)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_get_arm_opp - get the current ARM OPP + * + * Returns: the current ARM OPP + */ +int prcmu_get_arm_opp(void) +{ + return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP); +} + +/** + * prcmu_get_ddr_opp - get the current DDR OPP + * + * Returns: the current DDR OPP + */ +int prcmu_get_ddr_opp(void) +{ + return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW); +} + +/** + * set_ddr_opp - set the appropriate DDR OPP + * @opp: The new DDR operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the operating point of the DDR. + */ +int prcmu_set_ddr_opp(u8 opp) +{ + if (opp < DDR_100_OPP || opp > DDR_25_OPP) + return -EINVAL; + /* Changing the DDR OPP can hang the hardware pre-v21 */ + if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20()) + writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW)); + + return 0; +} +/** + * set_ape_opp - set the appropriate APE OPP + * @opp: The new APE operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the operating point of the APE. + */ +int prcmu_set_ape_opp(u8 opp) +{ + int r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); + writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || + (mb1_transfer.ack.ape_opp != opp)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_get_ape_opp - get the current APE OPP + * + * Returns: the current APE OPP + */ +int prcmu_get_ape_opp(void) +{ + return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP); +} + +/** + * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage + * @enable: true to request the higher voltage, false to drop a request. + * + * Calls to this function to enable and disable requests must be balanced. + */ +int prcmu_request_ape_opp_100_voltage(bool enable) +{ + int r = 0; + u8 header; + static unsigned int requests; + + mutex_lock(&mb1_transfer.lock); + + if (enable) { + if (0 != requests++) + goto unlock_and_return; + header = MB1H_REQUEST_APE_OPP_100_VOLT; + } else { + if (requests == 0) { + r = -EIO; + goto unlock_and_return; + } else if (1 != requests--) { + goto unlock_and_return; + } + header = MB1H_RELEASE_APE_OPP_100_VOLT; + } + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != header) || + ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0)) + r = -EIO; + +unlock_and_return: + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup + * + * This function releases the power state requirements of a USB wakeup. + */ +int prcmu_release_usb_wakeup_state(void) +{ + int r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_RELEASE_USB_WAKEUP, + (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) || + ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_set_epod - set the state of a EPOD (power domain) + * @epod_id: The EPOD to set + * @epod_state: The new EPOD state + * + * This function sets the state of a EPOD (power domain). It may not be called + * from interrupt context. + */ +int prcmu_set_epod(u16 epod_id, u8 epod_state) +{ + int r = 0; + bool ram_retention = false; + int i; + + /* check argument */ + BUG_ON(epod_id >= NUM_EPOD_ID); + + /* set flag if retention is possible */ + switch (epod_id) { + case EPOD_ID_SVAMMDSP: + case EPOD_ID_SIAMMDSP: + case EPOD_ID_ESRAM12: + case EPOD_ID_ESRAM34: + ram_retention = true; + break; + } + + /* check argument */ + BUG_ON(epod_state > EPOD_STATE_ON); + BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention); + + /* get lock */ + mutex_lock(&mb2_transfer.lock); + + /* wait for mailbox */ + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2)) + cpu_relax(); + + /* fill in mailbox */ + for (i = 0; i < NUM_EPOD_ID; i++) + writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i)); + writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id)); + + writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2)); + + writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + /* + * The current firmware version does not handle errors correctly, + * and we cannot recover if there is an error. + * This is expected to change when the firmware is updated. + */ + if (!wait_for_completion_timeout(&mb2_transfer.work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + goto unlock_and_return; + } + + if (mb2_transfer.ack.status != HWACC_PWR_ST_OK) + r = -EIO; + +unlock_and_return: + mutex_unlock(&mb2_transfer.lock); + return r; +} + +/** + * prcmu_configure_auto_pm - Configure autonomous power management. + * @sleep: Configuration for ApSleep. + * @idle: Configuration for ApIdle. + */ +void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle) +{ + u32 sleep_cfg; + u32 idle_cfg; + unsigned long flags; + + BUG_ON((sleep == NULL) || (idle == NULL)); + + sleep_cfg = (sleep->sva_auto_pm_enable & 0xF); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF)); + sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF)); + sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF)); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF)); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF)); + + idle_cfg = (idle->sva_auto_pm_enable & 0xF); + idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF)); + idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF)); + idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF)); + idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF)); + idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF)); + + spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags); + + /* + * The autonomous power management configuration is done through + * fields in mailbox 2, but these fields are only used as shared + * variables - i.e. there is no need to send a message. + */ + writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP)); + writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE)); + + mb2_transfer.auto_pm_enabled = + ((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON)); + + spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags); +} +EXPORT_SYMBOL(prcmu_configure_auto_pm); + +bool prcmu_is_auto_pm_enabled(void) +{ + return mb2_transfer.auto_pm_enabled; +} + +static int request_sysclk(bool enable) +{ + int r; + unsigned long flags; + + r = 0; + + mutex_lock(&mb3_transfer.sysclk_lock); + + spin_lock_irqsave(&mb3_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3)) + cpu_relax(); + + writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT)); + + writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3)); + writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb3_transfer.lock, flags); + + /* + * The firmware only sends an ACK if we want to enable the + * SysClk, and it succeeds. + */ + if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + } + + mutex_unlock(&mb3_transfer.sysclk_lock); + + return r; +} + +static int request_timclk(bool enable) +{ + u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK); + + if (!enable) + val |= PRCM_TCR_STOP_TIMERS; + writel(val, (_PRCMU_BASE + PRCM_TCR)); + + return 0; +} + +static int request_reg_clock(u8 clock, bool enable) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + if (enable) { + val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw); + } else { + clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); + val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK); + } + writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_request_clock() - Request for a clock to be enabled or disabled. + * @clock: The clock for which the request is made. + * @enable: Whether the clock should be enabled (true) or disabled (false). + * + * This function should only be used by the clock implementation. + * Do not use it from any other place! + */ +int prcmu_request_clock(u8 clock, bool enable) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return request_reg_clock(clock, enable); + else if (clock == PRCMU_TIMCLK) + return request_timclk(enable); + else if (clock == PRCMU_SYSCLK) + return request_sysclk(enable); + else + return -EINVAL; +} + +int prcmu_config_esram0_deep_sleep(u8 state) +{ + if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) || + (state < ESRAM0_DEEP_SLEEP_STATE_OFF)) + return -EINVAL; + + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON), + (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE)); + writeb(DDR_PWR_STATE_ON, + (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE)); + writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_config_hotdog(u8 threshold) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD)); + writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_config_hotmon(u8 low, u8 high) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW)); + writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH)); + writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH), + (tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG)); + writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +static int config_hot_period(u16 val) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD)); + writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_start_temp_sense(u16 cycles32k) +{ + if (cycles32k == 0xFFFF) + return -EINVAL; + + return config_hot_period(cycles32k); +} + +int prcmu_stop_temp_sense(void) +{ + return config_hot_period(0xFFFF); +} + +/** + * prcmu_set_clock_divider() - Configure the clock divider. + * @clock: The clock for which the request is made. + * @divider: The clock divider. (< 32) + * + * This function should only be used by the clock implementation. + * Do not use it from any other place! + */ +int prcmu_set_clock_divider(u8 clock, u8 divider) +{ + u32 val; + unsigned long flags; + + if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider)) + return -EINVAL; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK); + val |= (u32)divider; + writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + mutex_lock(&mb5_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); + writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); + writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); + writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); + + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + } else { + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + } + + if (!r) + *value = mb5_transfer.ack.value; + + mutex_unlock(&mb5_transfer.lock); + + return r; +} + +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + mutex_lock(&mb5_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); + writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); + writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); + writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); + + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + } else { + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); + } + + mutex_unlock(&mb5_transfer.lock); + + return r; +} + +/** + * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem + */ +void prcmu_ac_wake_req(void) +{ + u32 val; + + mutex_lock(&mb0_transfer.ac_wake_lock); + + val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ) + goto unlock_and_return; + + atomic_set(&ac_wake_req_state, 1); + + writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), + (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); + + if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + } + +unlock_and_return: + mutex_unlock(&mb0_transfer.ac_wake_lock); +} + +/** + * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem + */ +void prcmu_ac_sleep_req() +{ + u32 val; + + mutex_lock(&mb0_transfer.ac_wake_lock); + + val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)) + goto unlock_and_return; + + writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), + (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); + + if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + } + + atomic_set(&ac_wake_req_state, 0); + +unlock_and_return: + mutex_unlock(&mb0_transfer.ac_wake_lock); +} + +bool prcmu_is_ac_wake_requested(void) +{ + return (atomic_read(&ac_wake_req_state) != 0); +} + +/** + * prcmu_system_reset - System reset + * + * Saves the reset reason code and then sets the APE_SOFRST register which + * fires interrupt to fw + */ +void prcmu_system_reset(u16 reset_code) +{ + writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON)); + writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST)); +} + +/** + * prcmu_reset_modem - ask the PRCMU to reset modem + */ +void prcmu_modem_reset(void) +{ + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + /* + * No need to check return from PRCMU as modem should go in reset state + * This state is already managed by upper layer + */ + + mutex_unlock(&mb1_transfer.lock); +} + +static void ack_dbb_wakeup(void) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +static inline void print_unknown_header_warning(u8 n, u8 header) +{ + pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n", + header, n); +} + +static bool read_mailbox_0(void) +{ + bool r; + u32 ev; + unsigned int n; + u8 header; + + header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0); + switch (header) { + case MB0H_WAKEUP_EXE: + case MB0H_WAKEUP_SLEEP: + if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) + ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500); + else + ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500); + + if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK)) + complete(&mb0_transfer.ac_wake_work); + if (ev & WAKEUP_BIT_SYSCLK_OK) + complete(&mb3_transfer.sysclk_work); + + ev &= mb0_transfer.req.dbb_irqs; + + for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) { + if (ev & prcmu_irq_bit[n]) + generic_handle_irq(IRQ_PRCMU_BASE + n); + } + r = true; + break; + default: + print_unknown_header_warning(0, header); + r = false; + break; + } + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return r; +} + +static bool read_mailbox_1(void) +{ + mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1); + mb1_transfer.ack.arm_opp = readb(tcdm_base + + PRCM_ACK_MB1_CURRENT_ARM_OPP); + mb1_transfer.ack.ape_opp = readb(tcdm_base + + PRCM_ACK_MB1_CURRENT_APE_OPP); + mb1_transfer.ack.ape_voltage_status = readb(tcdm_base + + PRCM_ACK_MB1_APE_VOLTAGE_STATUS); + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + complete(&mb1_transfer.work); + return false; +} + +static bool read_mailbox_2(void) +{ + mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS); + writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + complete(&mb2_transfer.work); + return false; +} + +static bool read_mailbox_3(void) +{ + writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; +} + +static bool read_mailbox_4(void) +{ + u8 header; + bool do_complete = true; + + header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4); + switch (header) { + case MB4H_MEM_ST: + case MB4H_HOTDOG: + case MB4H_HOTMON: + case MB4H_HOT_PERIOD: + break; + default: + print_unknown_header_warning(4, header); + do_complete = false; + break; + } + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + + if (do_complete) + complete(&mb4_transfer.work); + + return false; +} + +static bool read_mailbox_5(void) +{ + mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL); + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + complete(&mb5_transfer.work); + return false; +} + +static bool read_mailbox_6(void) +{ + writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; +} + +static bool read_mailbox_7(void) +{ + writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; +} + +static bool (* const read_mailbox[NUM_MB])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + irqreturn_t r; + + bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); + if (unlikely(!bits)) + return IRQ_NONE; + + r = IRQ_HANDLED; + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + if (read_mailbox[n]()) + r = IRQ_WAKE_THREAD; + } + } + return r; +} + +static irqreturn_t prcmu_irq_thread_fn(int irq, void *data) +{ + ack_dbb_wakeup(); + return IRQ_HANDLED; +} + +static void prcmu_mask_work(struct work_struct *work) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +static void prcmu_irq_mask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags); + + mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE]; + + spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags); + + if (d->irq != IRQ_PRCMU_CA_SLEEP) + schedule_work(&mb0_transfer.mask_work); +} + +static void prcmu_irq_unmask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags); + + mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE]; + + spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags); + + if (d->irq != IRQ_PRCMU_CA_SLEEP) + schedule_work(&mb0_transfer.mask_work); +} + +static void noop(struct irq_data *d) +{ +} + +static struct irq_chip prcmu_irq_chip = { + .name = "prcmu", + .irq_disable = prcmu_irq_mask, + .irq_ack = noop, + .irq_mask = prcmu_irq_mask, + .irq_unmask = prcmu_irq_unmask, +}; + +void __init prcmu_early_init(void) +{ + unsigned int i; + + if (cpu_is_u8500v1()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); + } else if (cpu_is_u8500v2()) { + void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K); + + if (tcpm_base != NULL) { + int version; + version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); + prcmu_version.project_number = version & 0xFF; + prcmu_version.api_version = (version >> 8) & 0xFF; + prcmu_version.func_version = (version >> 16) & 0xFF; + prcmu_version.errata = (version >> 24) & 0xFF; + pr_info("PRCMU firmware version %d.%d.%d\n", + (version >> 8) & 0xFF, (version >> 16) & 0xFF, + (version >> 24) & 0xFF); + iounmap(tcpm_base); + } + + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); + } else { + pr_err("prcmu: Unsupported chip version\n"); + BUG(); + } + + spin_lock_init(&mb0_transfer.lock); + spin_lock_init(&mb0_transfer.dbb_irqs_lock); + mutex_init(&mb0_transfer.ac_wake_lock); + init_completion(&mb0_transfer.ac_wake_work); + mutex_init(&mb1_transfer.lock); + init_completion(&mb1_transfer.work); + mutex_init(&mb2_transfer.lock); + init_completion(&mb2_transfer.work); + spin_lock_init(&mb2_transfer.auto_pm_lock); + spin_lock_init(&mb3_transfer.lock); + mutex_init(&mb3_transfer.sysclk_lock); + init_completion(&mb3_transfer.sysclk_work); + mutex_init(&mb4_transfer.lock); + init_completion(&mb4_transfer.work); + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); + + INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work); + + /* Initalize irqs. */ + for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) { + unsigned int irq; + + irq = IRQ_PRCMU_BASE + i; + irq_set_chip_and_handler(irq, &prcmu_irq_chip, + handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + } +} + +/* + * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC + */ +static struct regulator_consumer_supply db8500_vape_consumers[] = { + REGULATOR_SUPPLY("v-ape", NULL), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"), + /* "v-mmc" changed to "vcore" in the mainline kernel */ + REGULATOR_SUPPLY("vcore", "sdi0"), + REGULATOR_SUPPLY("vcore", "sdi1"), + REGULATOR_SUPPLY("vcore", "sdi2"), + REGULATOR_SUPPLY("vcore", "sdi3"), + REGULATOR_SUPPLY("vcore", "sdi4"), + REGULATOR_SUPPLY("v-dma", "dma40.0"), + REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"), + /* "v-uart" changed to "vcore" in the mainline kernel */ + REGULATOR_SUPPLY("vcore", "uart0"), + REGULATOR_SUPPLY("vcore", "uart1"), + REGULATOR_SUPPLY("vcore", "uart2"), + REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"), +}; + +static struct regulator_consumer_supply db8500_vsmps2_consumers[] = { + /* CG2900 and CW1200 power to off-chip peripherals */ + REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"), + REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"), + REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"), + /* AV8100 regulator */ + REGULATOR_SUPPLY("hdmi_1v8", "0-0070"), +}; + +static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = { + REGULATOR_SUPPLY("vsupply", "b2r2.0"), + REGULATOR_SUPPLY("vsupply", "mcde.0"), +}; + +static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { + [DB8500_REGULATOR_VAPE] = { + .constraints = { + .name = "db8500-vape", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = db8500_vape_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers), + }, + [DB8500_REGULATOR_VARM] = { + .constraints = { + .name = "db8500-varm", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VMODEM] = { + .constraints = { + .name = "db8500-vmodem", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VPLL] = { + .constraints = { + .name = "db8500-vpll", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VSMPS1] = { + .constraints = { + .name = "db8500-vsmps1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VSMPS2] = { + .constraints = { + .name = "db8500-vsmps2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = db8500_vsmps2_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers), + }, + [DB8500_REGULATOR_VSMPS3] = { + .constraints = { + .name = "db8500-vsmps3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VRF1] = { + .constraints = { + .name = "db8500-vrf1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sva-mmdsp", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { + .constraints = { + /* "ret" means "retention" */ + .name = "db8500-sva-mmdsp-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAPIPE] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sva-pipe", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sia-mmdsp", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { + .constraints = { + .name = "db8500-sia-mmdsp-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SIAPIPE] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sia-pipe", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SGA] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sga", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-b2r2-mcde", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = db8500_b2r2_mcde_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers), + }, + [DB8500_REGULATOR_SWITCH_ESRAM12] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-esram12", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { + .constraints = { + .name = "db8500-esram12-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-esram34", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { + .constraints = { + .name = "db8500-esram34-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, +}; + +static struct mfd_cell db8500_prcmu_devs[] = { + { + .name = "db8500-prcmu-regulators", + .mfd_data = &db8500_regulators, + }, + { + .name = "cpufreq-u8500", + }, +}; + +/** + * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic + * + */ +static int __init db8500_prcmu_probe(struct platform_device *pdev) +{ + int err = 0; + + if (ux500_is_svp()) + return -ENODEV; + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + + err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, + prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); + if (err < 0) { + pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); + err = -EBUSY; + goto no_irq_return; + } + + if (cpu_is_u8500v20_or_later()) + prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); + + err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, + ARRAY_SIZE(db8500_prcmu_devs), NULL, + 0); + + if (err) + pr_err("prcmu: Failed to add subdevices\n"); + else + pr_info("DB8500 PRCMU initialized\n"); + +no_irq_return: + return err; +} + +static struct platform_driver db8500_prcmu_driver = { + .driver = { + .name = "db8500-prcmu", + .owner = THIS_MODULE, + }, +}; + +static int __init db8500_prcmu_init(void) +{ + return platform_driver_probe(&db8500_prcmu_driver, db8500_prcmu_probe); +} + +arch_initcall(db8500_prcmu_init); + +MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>"); +MODULE_DESCRIPTION("DB8500 PRCM Unit driver"); +MODULE_LICENSE("GPL v2"); |
