summaryrefslogtreecommitdiffstats
path: root/drivers/message/fusion
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/fusion')
-rw-r--r--drivers/message/fusion/lsi/mpi.h19
-rw-r--r--drivers/message/fusion/lsi/mpi_cnfg.h85
-rw-r--r--drivers/message/fusion/lsi/mpi_history.txt67
-rw-r--r--drivers/message/fusion/lsi/mpi_init.h203
-rw-r--r--drivers/message/fusion/lsi/mpi_ioc.h11
-rw-r--r--drivers/message/fusion/lsi/mpi_targ.h74
-rw-r--r--drivers/message/fusion/mptbase.c321
-rw-r--r--drivers/message/fusion/mptbase.h5
-rw-r--r--drivers/message/fusion/mptctl.c14
-rw-r--r--drivers/message/fusion/mptscsih.c140
-rw-r--r--drivers/message/fusion/mptspi.c6
11 files changed, 686 insertions, 259 deletions
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 9f98334e5076..b61e3d175070 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.07
+ * mpi.h Version: 01.05.08
*
* Version History
* ---------------
@@ -71,6 +71,9 @@
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
+ * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
+ * TargetAssistExtended requests.
+ * Added EEDP IOCStatus codes.
* --------------------------------------------------------------------------
*/
@@ -101,7 +104,7 @@
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x09)
+#define MPI_HEADER_VERSION_UNIT (0x0A)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
@@ -292,10 +295,13 @@
#define MPI_FUNCTION_DIAG_BUFFER_POST (0x1D)
#define MPI_FUNCTION_DIAG_RELEASE (0x1E)
+#define MPI_FUNCTION_SCSI_IO_32 (0x1F)
+
#define MPI_FUNCTION_LAN_SEND (0x20)
#define MPI_FUNCTION_LAN_RECEIVE (0x21)
#define MPI_FUNCTION_LAN_RESET (0x22)
+#define MPI_FUNCTION_TARGET_ASSIST_EXTENDED (0x23)
#define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24)
#define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25)
@@ -681,6 +687,15 @@ typedef struct _MSG_DEFAULT_REPLY
#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
/****************************************************************************/
+/* For use by SCSI Initiator and SCSI Target end-to-end data protection */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
+#define MPI_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
+#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
+
+
+/****************************************************************************/
/* SCSI Target values */
/****************************************************************************/
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index 15b12b06799d..d8339896f734 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.08
+ * mpi_cnfg.h Version: 01.05.09
*
* Version History
* ---------------
@@ -232,6 +232,23 @@
* New physical mapping mode in SAS IO Unit Page 2.
* Added CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added Slot and Enclosure fields to SAS Device Page 0.
+ * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
+ * Added more RAID type defines to IOC Page 2.
+ * Added Port Enable Delay settings to BIOS Page 1.
+ * Added Bad Block Table Full define to RAID Volume Page 0.
+ * Added Previous State defines to RAID Physical Disk
+ * Page 0.
+ * Added Max Sata Targets define for DiscoveryStatus field
+ * of SAS IO Unit Page 0.
+ * Added Device Self Test to Control Flags of SAS IO Unit
+ * Page 1.
+ * Added Direct Attach Starting Slot Number define for SAS
+ * IO Unit Page 2.
+ * Added new fields in SAS Device Page 2 for enclosure
+ * mapping.
+ * Added OwnerDevHandle and Flags field to SAS PHY Page 0.
+ * Added IOC GPIO Flags define to SAS Enclosure Page 0.
+ * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* --------------------------------------------------------------------------
*/
@@ -477,6 +494,7 @@ typedef struct _MSG_CONFIG_REPLY
#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626)
#define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642)
#define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949ES (0x0646)
/* SCSI */
#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030)
#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031)
@@ -769,9 +787,13 @@ typedef struct _CONFIG_PAGE_IOC_1
} CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
IOCPage1_t, MPI_POINTER pIOCPage1_t;
-#define MPI_IOCPAGE1_PAGEVERSION (0x02)
+#define MPI_IOCPAGE1_PAGEVERSION (0x03)
/* defines for the Flags field */
+#define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000)
+#define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000)
+#define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000)
+#define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000)
#define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE (0x00000010)
#define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001)
@@ -795,6 +817,11 @@ typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
#define MPI_RAID_VOL_TYPE_IS (0x00)
#define MPI_RAID_VOL_TYPE_IME (0x01)
#define MPI_RAID_VOL_TYPE_IM (0x02)
+#define MPI_RAID_VOL_TYPE_RAID_5 (0x03)
+#define MPI_RAID_VOL_TYPE_RAID_6 (0x04)
+#define MPI_RAID_VOL_TYPE_RAID_10 (0x05)
+#define MPI_RAID_VOL_TYPE_RAID_50 (0x06)
+#define MPI_RAID_VOL_TYPE_UNKNOWN (0xFF)
/* IOC Page 2 Volume Flags values */
@@ -820,13 +847,17 @@ typedef struct _CONFIG_PAGE_IOC_2
} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
IOCPage2_t, MPI_POINTER pIOCPage2_t;
-#define MPI_IOCPAGE2_PAGEVERSION (0x02)
+#define MPI_IOCPAGE2_PAGEVERSION (0x03)
/* IOC Page 2 Capabilities flags */
#define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001)
#define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002)
#define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT (0x00000008)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040)
#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000)
#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000)
#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000)
@@ -945,7 +976,7 @@ typedef struct _CONFIG_PAGE_BIOS_1
} CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
-#define MPI_BIOSPAGE1_PAGEVERSION (0x01)
+#define MPI_BIOSPAGE1_PAGEVERSION (0x02)
/* values for the BiosOptions field */
#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400)
@@ -954,6 +985,8 @@ typedef struct _CONFIG_PAGE_BIOS_1
#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
/* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20)
#define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
#define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
#define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
@@ -1167,6 +1200,7 @@ typedef struct _CONFIG_PAGE_BIOS_2
#define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER (0x03)
#define MPI_BIOSPAGE2_FORM_FC_WWN (0x04)
#define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05)
+#define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
/****************************************************************************
@@ -1957,11 +1991,11 @@ typedef struct _RAID_VOL0_STATUS
RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
/* RAID Volume Page 0 VolumeStatus defines */
-
#define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01)
#define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02)
#define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04)
#define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08)
+#define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x10)
#define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00)
#define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01)
@@ -2025,7 +2059,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
-#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x04)
+#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x05)
/* values for RAID Volume Page 0 InactiveStatus field */
#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
@@ -2104,6 +2138,8 @@ typedef struct _RAID_PHYS_DISK0_STATUS
#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01)
#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02)
#define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x04)
+#define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00)
+#define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x08)
#define MPI_PHYSDISK0_STATUS_ONLINE (0x00)
#define MPI_PHYSDISK0_STATUS_MISSING (0x01)
@@ -2132,7 +2168,7 @@ typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
} CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
-#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x01)
+#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x02)
typedef struct _RAID_PHYS_DISK1_PATH
@@ -2263,7 +2299,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
} CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
-#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x02)
+#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x03)
/* values for SAS IO Unit Page 0 PortFlags */
#define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08)
@@ -2299,6 +2335,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
#define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
#define MPI_SAS_IOUNIT0_DS_TABLE_LINK (0x00000400)
#define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
+#define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS (0x00001000)
typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
@@ -2336,6 +2373,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04)
/* values for SAS IO Unit Page 1 ControlFlags */
+#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
@@ -2345,9 +2383,8 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00)
#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x10)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
-#define MPI_SAS_IOUNIT1_CONTROL_AUTO_PORT_SAME_SAS_ADDR (0x0100)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
@@ -2390,7 +2427,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
-#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x03)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x04)
/* values for SAS IO Unit Page 2 Status field */
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
@@ -2406,6 +2443,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
#define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02)
#define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10)
+#define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20)
typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
@@ -2584,11 +2622,19 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_2
{
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
U64 PhysicalIdentifier; /* 08h */
- U32 Reserved1; /* 10h */
+ U32 EnclosureMapping; /* 10h */
} CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2,
SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t;
-#define MPI_SASDEVICE2_PAGEVERSION (0x00)
+#define MPI_SASDEVICE2_PAGEVERSION (0x01)
+
+/* defines for SAS Device Page 2 EnclosureMapping field */
+#define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT (0x0000000F)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT (0)
+#define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS (0x000007F0)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS (4)
+#define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX (0x001FF800)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX (11)
/****************************************************************************
@@ -2598,7 +2644,8 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_2
typedef struct _CONFIG_PAGE_SAS_PHY_0
{
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
- U32 Reserved1; /* 08h */
+ U16 OwnerDevHandle; /* 08h */
+ U16 Reserved1; /* 0Ah */
U64 SASAddress; /* 0Ch */
U16 AttachedDevHandle; /* 14h */
U8 AttachedPhyIdentifier; /* 16h */
@@ -2607,12 +2654,12 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0
U8 ProgrammedLinkRate; /* 20h */
U8 HwLinkRate; /* 21h */
U8 ChangeCount; /* 22h */
- U8 Reserved3; /* 23h */
+ U8 Flags; /* 23h */
U32 PhyInfo; /* 24h */
} CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
-#define MPI_SASPHY0_PAGEVERSION (0x00)
+#define MPI_SASPHY0_PAGEVERSION (0x01)
/* values for SAS PHY Page 0 ProgrammedLinkRate field */
#define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK (0xF0)
@@ -2632,6 +2679,9 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0
#define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 (0x09)
+/* values for SAS PHY Page 0 Flags field */
+#define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
+
/* values for SAS PHY Page 0 PhyInfo field */
#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
#define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR (0x00002000)
@@ -2690,7 +2740,7 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
} CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0,
SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t;
-#define MPI_SASENCLOSURE0_PAGEVERSION (0x00)
+#define MPI_SASENCLOSURE0_PAGEVERSION (0x01)
/* values for SAS Enclosure Page 0 Flags field */
#define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID (0x0020)
@@ -2702,6 +2752,7 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
#define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
#define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
+#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
/****************************************************************************
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index c9edbee41edf..1a30ef16adb4 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -6,17 +6,17 @@
Copyright (c) 2000-2005 LSI Logic Corporation.
---------------------------------------
- Header Set Release Version: 01.05.09
+ Header Set Release Version: 01.05.10
Header Set Release Date: 03-11-05
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.07 01.05.06
- mpi_ioc.h 01.05.08 01.05.07
- mpi_cnfg.h 01.05.08 01.05.07
- mpi_init.h 01.05.04 01.05.03
- mpi_targ.h 01.05.04 01.05.03
+ mpi.h 01.05.08 01.05.07
+ mpi_ioc.h 01.05.09 01.05.08
+ mpi_cnfg.h 01.05.09 01.05.08
+ mpi_init.h 01.05.05 01.05.04
+ mpi_targ.h 01.05.05 01.05.04
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02
@@ -24,7 +24,7 @@
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01
- mpi_history.txt 01.05.09 01.05.08
+ mpi_history.txt 01.05.09 01.05.09
* Date Version Description
@@ -88,6 +88,9 @@ mpi.h
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
+ * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
+ * TargetAssistExtended requests.
+ * Added EEDP IOCStatus codes.
* --------------------------------------------------------------------------
mpi_ioc.h
@@ -159,6 +162,8 @@ mpi_ioc.h
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
+ * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
+ * Added Max SATA Targets to SAS Discovery Error event.
* --------------------------------------------------------------------------
mpi_cnfg.h
@@ -380,6 +385,23 @@ mpi_cnfg.h
* New physical mapping mode in SAS IO Unit Page 2.
* Added CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added Slot and Enclosure fields to SAS Device Page 0.
+ * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
+ * Added more RAID type defines to IOC Page 2.
+ * Added Port Enable Delay settings to BIOS Page 1.
+ * Added Bad Block Table Full define to RAID Volume Page 0.
+ * Added Previous State defines to RAID Physical Disk
+ * Page 0.
+ * Added Max Sata Targets define for DiscoveryStatus field
+ * of SAS IO Unit Page 0.
+ * Added Device Self Test to Control Flags of SAS IO Unit
+ * Page 1.
+ * Added Direct Attach Starting Slot Number define for SAS
+ * IO Unit Page 2.
+ * Added new fields in SAS Device Page 2 for enclosure
+ * mapping.
+ * Added OwnerDevHandle and Flags field to SAS PHY Page 0.
+ * Added IOC GPIO Flags define to SAS Enclosure Page 0.
+ * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* --------------------------------------------------------------------------
mpi_init.h
@@ -418,6 +440,8 @@ mpi_init.h
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
+ * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
+ * Added four new defines for SEP SlotStatus.
* --------------------------------------------------------------------------
mpi_targ.h
@@ -461,6 +485,7 @@ mpi_targ.h
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
+ * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* --------------------------------------------------------------------------
mpi_fc.h
@@ -571,20 +596,20 @@ mpi_type.h
mpi_history.txt Parts list history
-Filename 01.05.09
----------- --------
-mpi.h 01.05.07
-mpi_ioc.h 01.05.08
-mpi_cnfg.h 01.05.08
-mpi_init.h 01.05.04
-mpi_targ.h 01.05.04
-mpi_fc.h 01.05.01
-mpi_lan.h 01.05.01
-mpi_raid.h 01.05.02
-mpi_tool.h 01.05.03
-mpi_inb.h 01.05.01
-mpi_sas.h 01.05.01
-mpi_type.h 01.05.01
+Filename 01.05.10 01.05.09
+---------- -------- --------
+mpi.h 01.05.08 01.05.07
+mpi_ioc.h 01.05.09 01.05.08
+mpi_cnfg.h 01.05.09 01.05.08
+mpi_init.h 01.05.05 01.05.04
+mpi_targ.h 01.05.05 01.05.04
+mpi_fc.h 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01
+mpi_raid.h 01.05.02 01.05.02
+mpi_tool.h 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01
+mpi_sas.h 01.05.01 01.05.01
+mpi_type.h 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index aca035801a86..d5af75afbd94 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -6,7 +6,7 @@
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
- * mpi_init.h Version: 01.05.04
+ * mpi_init.h Version: 01.05.05
*
* Version History
* ---------------
@@ -48,6 +48,8 @@
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
+ * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
+ * Added four new defines for SEP SlotStatus.
* --------------------------------------------------------------------------
*/
@@ -203,6 +205,197 @@ typedef struct _MSG_SCSI_IO_REPLY
/****************************************************************************/
+/* SCSI IO 32 messages and associated structures */
+/****************************************************************************/
+
+typedef struct
+{
+ U8 CDB[20]; /* 00h */
+ U32 PrimaryReferenceTag; /* 14h */
+ U16 PrimaryApplicationTag; /* 18h */
+ U16 PrimaryApplicationTagMask; /* 1Ah */
+ U32 TransferLength; /* 1Ch */
+} MPI_SCSI_IO32_CDB_EEDP32, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP32,
+ MpiScsiIo32CdbEedp32_t, MPI_POINTER pMpiScsiIo32CdbEedp32_t;
+
+typedef struct
+{
+ U8 CDB[16]; /* 00h */
+ U32 DataLength; /* 10h */
+ U32 PrimaryReferenceTag; /* 14h */
+ U16 PrimaryApplicationTag; /* 18h */
+ U16 PrimaryApplicationTagMask; /* 1Ah */
+ U32 TransferLength; /* 1Ch */
+} MPI_SCSI_IO32_CDB_EEDP16, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP16,
+ MpiScsiIo32CdbEedp16_t, MPI_POINTER pMpiScsiIo32CdbEedp16_t;
+
+typedef union
+{
+ U8 CDB32[32];
+ MPI_SCSI_IO32_CDB_EEDP32 EEDP32;
+ MPI_SCSI_IO32_CDB_EEDP16 EEDP16;
+ SGE_SIMPLE_UNION SGE;
+} MPI_SCSI_IO32_CDB_UNION, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_UNION,
+ MpiScsiIo32Cdb_t, MPI_POINTER pMpiScsiIo32Cdb_t;
+
+typedef struct
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U16 Reserved1; /* 02h */
+ U32 Reserved2; /* 04h */
+} MPI_SCSI_IO32_BUS_TARGET_ID_FORM, MPI_POINTER PTR_MPI_SCSI_IO32_BUS_TARGET_ID_FORM,
+ MpiScsiIo32BusTargetIdForm_t, MPI_POINTER pMpiScsiIo32BusTargetIdForm_t;
+
+typedef union
+{
+ MPI_SCSI_IO32_BUS_TARGET_ID_FORM SCSIID;
+ U64 WWID;
+} MPI_SCSI_IO32_ADDRESS, MPI_POINTER PTR_MPI_SCSI_IO32_ADDRESS,
+ MpiScsiIo32Address_t, MPI_POINTER pMpiScsiIo32Address_t;
+
+typedef struct _MSG_SCSI_IO32_REQUEST
+{
+ U8 Port; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Flags; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 LUN[8]; /* 0Ch */
+ U32 Control; /* 14h */
+ MPI_SCSI_IO32_CDB_UNION CDB; /* 18h */
+ U32 DataLength; /* 38h */
+ U32 BidirectionalDataLength; /* 3Ch */
+ U32 SecondaryReferenceTag; /* 40h */
+ U16 SecondaryApplicationTag; /* 44h */
+ U16 Reserved2; /* 46h */
+ U16 EEDPFlags; /* 48h */
+ U16 ApplicationTagTranslationMask; /* 4Ah */
+ U32 EEDPBlockSize; /* 4Ch */
+ MPI_SCSI_IO32_ADDRESS DeviceAddress; /* 50h */
+ U8 SGLOffset0; /* 58h */
+ U8 SGLOffset1; /* 59h */
+ U8 SGLOffset2; /* 5Ah */
+ U8 SGLOffset3; /* 5Bh */
+ U32 Reserved3; /* 5Ch */
+ U32 Reserved4; /* 60h */
+ U32 SenseBufferLowAddr; /* 64h */
+ SGE_IO_UNION SGL; /* 68h */
+} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
+ SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
+
+/* SCSI IO 32 MsgFlags bits */
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH (0x01)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32 (0x00)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64 (0x01)
+
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION (0x02)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST (0x00)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_IOC (0x02)
+
+#define MPI_SCSIIO32_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
+#define MPI_SCSIIO32_MSGFLGS_SGL_OFFSETS_CHAINS (0x08)
+#define MPI_SCSIIO32_MSGFLGS_MULTICAST (0x10)
+#define MPI_SCSIIO32_MSGFLGS_BIDIRECTIONAL (0x20)
+#define MPI_SCSIIO32_MSGFLGS_LARGE_CDB (0x40)
+
+/* SCSI IO 32 Flags bits */
+#define MPI_SCSIIO32_FLAGS_FORM_MASK (0x03)
+#define MPI_SCSIIO32_FLAGS_FORM_SCSIID (0x00)
+#define MPI_SCSIIO32_FLAGS_FORM_WWID (0x01)
+
+/* SCSI IO 32 LUN fields */
+#define MPI_SCSIIO32_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI_SCSIIO32_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI_SCSIIO32_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
+#define MPI_SCSIIO32_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
+#define MPI_SCSIIO32_LUN_LEVEL_1_WORD (0xFF00)
+#define MPI_SCSIIO32_LUN_LEVEL_1_DWORD (0x0000FF00)
+
+/* SCSI IO 32 Control bits */
+#define MPI_SCSIIO32_CONTROL_DATADIRECTION_MASK (0x03000000)
+#define MPI_SCSIIO32_CONTROL_NODATATRANSFER (0x00000000)
+#define MPI_SCSIIO32_CONTROL_WRITE (0x01000000)
+#define MPI_SCSIIO32_CONTROL_READ (0x02000000)
+#define MPI_SCSIIO32_CONTROL_BIDIRECTIONAL (0x03000000)
+
+#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_MASK (0xFC000000)
+#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_SHIFT (26)
+
+#define MPI_SCSIIO32_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
+#define MPI_SCSIIO32_CONTROL_SIMPLEQ (0x00000000)
+#define MPI_SCSIIO32_CONTROL_HEADOFQ (0x00000100)
+#define MPI_SCSIIO32_CONTROL_ORDEREDQ (0x00000200)
+#define MPI_SCSIIO32_CONTROL_ACAQ (0x00000400)
+#define MPI_SCSIIO32_CONTROL_UNTAGGED (0x00000500)
+#define MPI_SCSIIO32_CONTROL_NO_DISCONNECT (0x00000700)
+
+#define MPI_SCSIIO32_CONTROL_TASKMANAGE_MASK (0x00FF0000)
+#define MPI_SCSIIO32_CONTROL_OBSOLETE (0x00800000)
+#define MPI_SCSIIO32_CONTROL_CLEAR_ACA_RSV (0x00400000)
+#define MPI_SCSIIO32_CONTROL_TARGET_RESET (0x00200000)
+#define MPI_SCSIIO32_CONTROL_LUN_RESET_RSV (0x00100000)
+#define MPI_SCSIIO32_CONTROL_RESERVED (0x00080000)
+#define MPI_SCSIIO32_CONTROL_CLR_TASK_SET_RSV (0x00040000)
+#define MPI_SCSIIO32_CONTROL_ABORT_TASK_SET (0x00020000)
+#define MPI_SCSIIO32_CONTROL_RESERVED2 (0x00010000)
+
+/* SCSI IO 32 EEDPFlags */
+#define MPI_SCSIIO32_EEDPFLAGS_MASK_OP (0x0007)
+#define MPI_SCSIIO32_EEDPFLAGS_NOOP_OP (0x0000)
+#define MPI_SCSIIO32_EEDPFLAGS_CHK_OP (0x0001)
+#define MPI_SCSIIO32_EEDPFLAGS_STRIP_OP (0x0002)
+#define MPI_SCSIIO32_EEDPFLAGS_CHKRM_OP (0x0003)
+#define MPI_SCSIIO32_EEDPFLAGS_INSERT_OP (0x0004)
+#define MPI_SCSIIO32_EEDPFLAGS_REPLACE_OP (0x0006)
+#define MPI_SCSIIO32_EEDPFLAGS_CHKREGEN_OP (0x0007)
+
+#define MPI_SCSIIO32_EEDPFLAGS_PASS_REF_TAG (0x0008)
+#define MPI_SCSIIO32_EEDPFLAGS_8_9THS_MODE (0x0010)
+
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_MASK (0x0700)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_GUARD (0x0100)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_REFTAG (0x0200)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_LBATAG (0x0400)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_SHIFT (8)
+
+#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
+
+
+/* SCSIIO32 IO reply structure */
+typedef struct _MSG_SCSIIO32_IO_REPLY
+{
+ U8 Port; /* 00h */
+ U8 Reserved1; /* 01h */
+ U8 MsgLength; /* 02h */
+ U8 Function; /* 03h */
+ U8 CDBLength; /* 04h */
+ U8 SenseBufferLength; /* 05h */
+ U8 Flags; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U8 SCSIStatus; /* 0Ch */
+ U8 SCSIState; /* 0Dh */
+ U16 IOCStatus; /* 0Eh */
+ U32 IOCLogInfo; /* 10h */
+ U32 TransferCount; /* 14h */
+ U32 SenseCount; /* 18h */
+ U32 ResponseInfo; /* 1Ch */
+ U16 TaskTag; /* 20h */
+ U16 Reserved2; /* 22h */
+ U32 BidirectionalTransferCount; /* 24h */
+} MSG_SCSIIO32_IO_REPLY, MPI_POINTER PTR_MSG_SCSIIO32_IO_REPLY,
+ SCSIIO32Reply_t, MPI_POINTER pSCSIIO32Reply_t;
+
+
+/****************************************************************************/
/* SCSI Task Management messages */
/****************************************************************************/
@@ -310,10 +503,14 @@ typedef struct _MSG_SEP_REQUEST
#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI_SEP_REQ_SLOTSTATUS_REQ_CONSISTENCY_CHECK (0x00001000)
+#define MPI_SEP_REQ_SLOTSTATUS_DISABLE (0x00002000)
+#define MPI_SEP_REQ_SLOTSTATUS_REQ_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000)
#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000)
+#define MPI_SEP_REQ_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000)
@@ -352,11 +549,15 @@ typedef struct _MSG_SEP_REPLY
#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
+#define MPI_SEP_REPLY_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000)
+#define MPI_SEP_REPLY_SLOTSTATUS_DISABLE (0x00002000)
+#define MPI_SEP_REPLY_SLOTSTATUS_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000)
#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000)
#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
+#define MPI_SEP_REPLY_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index f91eb4efe8cc..93b70e2b4266 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -6,7 +6,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.08
+ * mpi_ioc.h Version: 01.05.09
*
* Version History
* ---------------
@@ -81,6 +81,8 @@
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
+ * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
+ * Added Max SATA Targets to SAS Discovery Error event.
* --------------------------------------------------------------------------
*/
@@ -261,7 +263,11 @@ typedef struct _MSG_IOC_FACTS_REPLY
#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
-
+#define MPI_IOCFACTS_CAPABILITY_EEDP (0x00000040)
+#define MPI_IOCFACTS_CAPABILITY_BIDIRECTIONAL (0x00000080)
+#define MPI_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
+#define MPI_IOCFACTS_CAPABILITY_SCSIIO32 (0x00000200)
+#define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16 (0x00000400)
/*****************************************************************************
@@ -677,6 +683,7 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_SUBTRACTIVE (0x00000200)
#define MPI_EVENT_DSCVRY_ERR_DS_TABLE_TO_TABLE (0x00000400)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800)
+#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)
/*****************************************************************************
diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h
index 623901fd82be..3f462859ceea 100644
--- a/drivers/message/fusion/lsi/mpi_targ.h
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -6,7 +6,7 @@
* Title: MPI Target mode messages and structures
* Creation Date: June 22, 2000
*
- * mpi_targ.h Version: 01.05.04
+ * mpi_targ.h Version: 01.05.05
*
* Version History
* ---------------
@@ -53,6 +53,7 @@
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
+ * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* --------------------------------------------------------------------------
*/
@@ -371,6 +372,77 @@ typedef struct _MSG_TARGET_ERROR_REPLY
/****************************************************************************/
+/* Target Assist Extended Request */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_ASSIST_EXT_REQUEST
+{
+ U8 StatusCode; /* 00h */
+ U8 TargetAssistFlags; /* 01h */
+ U8 ChainOffset; /* 02h */
+ U8 Function; /* 03h */
+ U16 QueueTag; /* 04h */
+ U8 Reserved1; /* 06h */
+ U8 MsgFlags; /* 07h */
+ U32 MsgContext; /* 08h */
+ U32 ReplyWord; /* 0Ch */
+ U8 LUN[8]; /* 10h */
+ U32 RelativeOffset; /* 18h */
+ U32 Reserved2; /* 1Ch */
+ U32 Reserved3; /* 20h */
+ U32 PrimaryReferenceTag; /* 24h */
+ U16 PrimaryApplicationTag; /* 28h */
+ U16 PrimaryApplicationTagMask; /* 2Ah */
+ U32 Reserved4; /* 2Ch */
+ U32 DataLength; /* 30h */
+ U32 BidirectionalDataLength; /* 34h */
+ U32 SecondaryReferenceTag; /* 38h */
+ U16 SecondaryApplicationTag; /* 3Ch */
+ U16 Reserved5; /* 3Eh */
+ U16 EEDPFlags; /* 40h */
+ U16 ApplicationTagTranslationMask; /* 42h */
+ U32 EEDPBlockSize; /* 44h */
+ U8 SGLOffset0; /* 48h */
+ U8 SGLOffset1; /* 49h */
+ U8 SGLOffset2; /* 4Ah */
+ U8 SGLOffset3; /* 4Bh */
+ U32 Reserved6; /* 4Ch */
+ SGE_IO_UNION SGL[1]; /* 50h */
+} MSG_TARGET_ASSIST_EXT_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_EXT_REQUEST,
+ TargetAssistExtRequest_t, MPI_POINTER pTargetAssistExtRequest_t;
+
+/* see the defines after MSG_TARGET_ASSIST_REQUEST for TargetAssistFlags */
+
+/* defines for the MsgFlags field */
+#define TARGET_ASSIST_EXT_MSGFLAGS_BIDIRECTIONAL (0x20)
+#define TARGET_ASSIST_EXT_MSGFLAGS_MULTICAST (0x10)
+#define TARGET_ASSIST_EXT_MSGFLAGS_SGL_OFFSET_CHAINS (0x08)
+
+/* defines for the EEDPFlags field */
+#define TARGET_ASSIST_EXT_EEDP_MASK_OP (0x0007)
+#define TARGET_ASSIST_EXT_EEDP_NOOP_OP (0x0000)
+#define TARGET_ASSIST_EXT_EEDP_CHK_OP (0x0001)
+#define TARGET_ASSIST_EXT_EEDP_STRIP_OP (0x0002)
+#define TARGET_ASSIST_EXT_EEDP_CHKRM_OP (0x0003)
+#define TARGET_ASSIST_EXT_EEDP_INSERT_OP (0x0004)
+#define TARGET_ASSIST_EXT_EEDP_REPLACE_OP (0x0006)
+#define TARGET_ASSIST_EXT_EEDP_CHKREGEN_OP (0x0007)
+
+#define TARGET_ASSIST_EXT_EEDP_PASS_REF_TAG (0x0008)
+
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_MASK (0x0700)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_GUARD (0x0100)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_APPTAG (0x0200)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_REFTAG (0x0400)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_SHIFT (8)
+
+#define TARGET_ASSIST_EXT_EEDP_INC_SEC_APPTAG (0x1000)
+#define TARGET_ASSIST_EXT_EEDP_INC_PRI_APPTAG (0x2000)
+#define TARGET_ASSIST_EXT_EEDP_INC_SEC_REFTAG (0x4000)
+#define TARGET_ASSIST_EXT_EEDP_INC_PRI_REFTAG (0x8000)
+
+
+/****************************************************************************/
/* Target Status Send Request */
/****************************************************************************/
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index ffbe6f4720e1..f517d0692d5f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -218,8 +218,7 @@ pci_enable_io_access(struct pci_dev *pdev)
* (also referred to as a IO Controller or IOC).
* This routine must clear the interrupt from the adapter and does
* so by reading the reply FIFO. Multiple replies may be processed
- * per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
- * which is currently set to 32 in mptbase.h.
+ * per single call to this routine.
*
* This routine handles register-level access of the adapter but
* dispatches (calls) a protocol-specific callback routine to handle
@@ -279,11 +278,11 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
- dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n",
- ioc->name, mr, req_idx));
+ dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+ ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
DBG_DUMP_REPLY_FRAME(mr)
- /* Check/log IOC log info
+ /* Check/log IOC log info
*/
ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
@@ -345,7 +344,7 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
|| (mf < ioc->req_frames)) ) {
printk(MYIOC_s_WARN_FMT
- "mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
+ "mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf);
cb_idx = 0;
pa = 0;
freeme = 0;
@@ -399,7 +398,7 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
* @mf: Pointer to original MPT request frame
* @reply: Pointer to MPT reply frame (NULL if TurboReply)
*
- * Returns 1 indicating original alloc'd request frame ptr
+ * Returns 1 indicating original alloc'd request frame ptr
* should be freed, or 0 if it shouldn't.
*/
static int
@@ -408,28 +407,17 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
int freereq = 1;
u8 func;
- dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
-
- if ((mf == NULL) ||
- (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
- printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n",
- ioc->name, (void *)mf);
- return 1;
- }
-
- if (reply == NULL) {
- dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n",
- ioc->name));
- return 1;
- }
+ dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
+#if defined(MPT_DEBUG_MSG_FRAME)
if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf));
DBG_DUMP_REQUEST_FRAME_HDR(mf)
}
+#endif
func = reply->u.hdr.Function;
- dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
+ dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
ioc->name, func));
if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
@@ -448,8 +436,14 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
* Hmmm... It seems that EventNotificationReply is an exception
* to the rule of one reply per request.
*/
- if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
+ if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
freereq = 0;
+ devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
+ ioc->name, pEvReply));
+ } else {
+ devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
+ ioc->name, pEvReply));
+ }
#ifdef CONFIG_PROC_FS
// LogEvent(ioc, pEvReply);
@@ -491,10 +485,21 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
pCfg->status = status;
if (status == MPI_IOCSTATUS_SUCCESS) {
- pCfg->hdr->PageVersion = pReply->Header.PageVersion;
- pCfg->hdr->PageLength = pReply->Header.PageLength;
- pCfg->hdr->PageNumber = pReply->Header.PageNumber;
- pCfg->hdr->PageType = pReply->Header.PageType;
+ if ((pReply->Header.PageType &
+ MPI_CONFIG_PAGETYPE_MASK) ==
+ MPI_CONFIG_PAGETYPE_EXTENDED) {
+ pCfg->cfghdr.ehdr->ExtPageLength =
+ le16_to_cpu(pReply->ExtPageLength);
+ pCfg->cfghdr.ehdr->ExtPageType =
+ pReply->ExtPageType;
+ }
+ pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+
+ /* If this is a regular header, save PageLength. */
+ /* LMP Do this better so not using a reserved field! */
+ pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+ pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+ pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
}
}
@@ -705,7 +710,7 @@ mpt_device_driver_deregister(int cb_idx)
if (dd_cbfunc->remove)
dd_cbfunc->remove(ioc->pcidev);
}
-
+
MptDeviceDriverHandlers[cb_idx] = NULL;
}
@@ -818,7 +823,7 @@ mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
}
#endif
- mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
+ mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx]));
CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
}
@@ -920,7 +925,7 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req,
/* Make sure there are no doorbells */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
+
CHIPREG_WRITE32(&ioc->chip->Doorbell,
((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
@@ -935,14 +940,14 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req,
return -5;
dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n",
- ioc->name, ii));
+ ioc->name, ii));
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
return -2;
}
-
+
/* Send request via doorbell handshake */
req_as_bytes = (u8 *) req;
for (ii = 0; ii < reqBytes/4; ii++) {
@@ -988,9 +993,9 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
if (ioc->id == iocid) {
*iocpp =ioc;
return iocid;
- }
+ }
}
-
+
*iocpp = NULL;
return -1;
}
@@ -1032,9 +1037,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
if (pci_enable_device(pdev))
return r;
-
+
dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
-
+
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
dprintk((KERN_INFO MYNAM
": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
@@ -1059,7 +1064,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->alloc_total = sizeof(MPT_ADAPTER);
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
-
+
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
@@ -1088,7 +1093,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
/* Find lookup slot. */
INIT_LIST_HEAD(&ioc->list);
ioc->id = mpt_ids++;
-
+
mem_phys = msize = 0;
port = psize = 0;
for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
@@ -1143,7 +1148,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->prod_name = "LSIFC909";
ioc->bus_type = FC;
}
- if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
ioc->prod_name = "LSIFC929";
ioc->bus_type = FC;
}
@@ -1322,7 +1327,7 @@ mpt_detach(struct pci_dev *pdev)
remove_proc_entry(pname, NULL);
sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
remove_proc_entry(pname, NULL);
-
+
/* call per device driver remove entry point */
for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
if(MptDeviceDriverHandlers[ii] &&
@@ -1330,7 +1335,7 @@ mpt_detach(struct pci_dev *pdev)
MptDeviceDriverHandlers[ii]->remove(pdev);
}
}
-
+
/* Disable interrupts! */
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
@@ -1403,7 +1408,7 @@ mpt_resume(struct pci_dev *pdev)
u32 device_state = pdev->current_state;
int recovery_state;
int ii;
-
+
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
ioc->name, pdev, pci_name(pdev), device_state);
@@ -1534,7 +1539,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
break;
}
-
+
if (ii == 5) {
dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc));
@@ -1542,7 +1547,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
} else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
MptDisplayIocCapabilities(ioc);
}
-
+
if (alt_ioc_ready) {
if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
@@ -1613,7 +1618,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
if (reset_alt_ioc_active && ioc->alt_ioc) {
/* (re)Enable alt-IOC! (reply interrupt) */
- dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
+ dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
ioc->alt_ioc->name));
CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
ioc->alt_ioc->active = 1;
@@ -1670,7 +1675,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
/* Find IM volumes
*/
- if (ioc->facts.MsgVersion >= 0x0102)
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
mpt_findImVolumes(ioc);
/* Check, and possibly reset, the coalescing value
@@ -1700,7 +1705,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
}
if (alt_ioc_ready && MptResetHandlers[ii]) {
- dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
+ drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
ioc->name, ioc->alt_ioc->name, ii));
rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
handlers++;
@@ -1733,8 +1738,8 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
dprintk((MYIOC_s_INFO_FMT "PCI device %s devfn=%x/%x,"
" searching for devfn match on %x or %x\n",
- ioc->name, pci_name(pdev), pdev->devfn,
- func-1, func+1));
+ ioc->name, pci_name(pdev), pdev->bus->number,
+ pdev->devfn, func-1, func+1));
peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
if (!peer) {
@@ -1861,36 +1866,39 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
static void
mpt_adapter_dispose(MPT_ADAPTER *ioc)
{
- if (ioc != NULL) {
- int sz_first, sz_last;
+ int sz_first, sz_last;
- sz_first = ioc->alloc_total;
+ if (ioc == NULL)
+ return;
- mpt_adapter_disable(ioc);
+ sz_first = ioc->alloc_total;
- if (ioc->pci_irq != -1) {
- free_irq(ioc->pci_irq, ioc);
- ioc->pci_irq = -1;
- }
+ mpt_adapter_disable(ioc);
- if (ioc->memmap != NULL)
- iounmap(ioc->memmap);
+ if (ioc->pci_irq != -1) {
+ free_irq(ioc->pci_irq, ioc);
+ ioc->pci_irq = -1;
+ }
+
+ if (ioc->memmap != NULL) {
+ iounmap(ioc->memmap);
+ ioc->memmap = NULL;
+ }
#if defined(CONFIG_MTRR) && 0
- if (ioc->mtrr_reg > 0) {
- mtrr_del(ioc->mtrr_reg, 0, 0);
- dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
- }
+ if (ioc->mtrr_reg > 0) {
+ mtrr_del(ioc->mtrr_reg, 0, 0);
+ dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
+ }
#endif
- /* Zap the adapter lookup ptr! */
- list_del(&ioc->list);
+ /* Zap the adapter lookup ptr! */
+ list_del(&ioc->list);
- sz_last = ioc->alloc_total;
- dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
- ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
- kfree(ioc);
- }
+ sz_last = ioc->alloc_total;
+ dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
+ ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+ kfree(ioc);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1977,7 +1985,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
}
/* Is it already READY? */
- if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+ if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
return 0;
/*
@@ -1995,7 +2003,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
* Hmmm... Did it get left operational?
*/
if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
- dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n",
+ dinitprintk((MYIOC_s_INFO_FMT "IOC operational unexpected\n",
ioc->name));
/* Check WhoInit.
@@ -2004,8 +2012,8 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
* Else, fall through to KickStart case
*/
whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
- dprintk((KERN_WARNING MYNAM
- ": whoinit 0x%x\n statefault %d force %d\n",
+ dinitprintk((KERN_INFO MYNAM
+ ": whoinit 0x%x statefault %d force %d\n",
whoinit, statefault, force));
if (whoinit == MPI_WHOINIT_PCI_PEER)
return -4;
@@ -2140,8 +2148,8 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
get_facts.Function = MPI_FUNCTION_IOC_FACTS;
/* Assert: All other get_facts fields are zero! */
- dinitprintk((MYIOC_s_INFO_FMT
- "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
+ dinitprintk((MYIOC_s_INFO_FMT
+ "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
ioc->name, req_sz, reply_sz));
/* No non-zero fields in the get_facts request are greater than
@@ -2174,7 +2182,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
- status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
+ status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
/* CHECKME! IOCStatus, IOCLogInfo */
facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
@@ -2221,7 +2229,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
if ( sz & 0x02 )
sz += 2;
facts->FWImageSize = sz;
-
+
if (!facts->RequestFrameSize) {
/* Something is wrong! */
printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
@@ -2240,7 +2248,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
ioc->NBShiftFactor = shiftFactor;
dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
ioc->name, vv, shiftFactor, r));
-
+
if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
/*
* Set values for this IOC's request & reply frame sizes,
@@ -2261,7 +2269,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
return r;
}
} else {
- printk(MYIOC_s_ERR_FMT
+ printk(MYIOC_s_ERR_FMT
"Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
RequestFrameSize)/sizeof(u32)));
@@ -2413,9 +2421,11 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
ioc->name, &ioc_init));
-
- if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
+
+ if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
return r;
+ }
/* YIKES! SUPER IMPORTANT!!!
* Poll IocState until _OPERATIONAL while IOC is doing
@@ -2440,7 +2450,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
state = mpt_GetIocState(ioc, 1);
count++;
}
- dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
+ dinitprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
ioc->name, count));
return r;
@@ -2529,7 +2539,7 @@ mpt_free_fw_memory(MPT_ADAPTER *ioc)
int sz;
sz = ioc->facts.FWImageSize;
- dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ dinitprintk((KERN_INFO MYNAM "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
pci_free_consistent(ioc->pcidev, sz,
ioc->cached_fw, ioc->cached_fw_dma);
@@ -2573,9 +2583,9 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
mpt_alloc_fw_memory(ioc, sz);
- dinitprintk((KERN_WARNING MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
+ dinitprintk((KERN_INFO MYNAM ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
-
+
if (ioc->cached_fw == NULL) {
/* Major Failure.
*/
@@ -2605,14 +2615,14 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma);
sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
- dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n",
+ dinitprintk((KERN_INFO MYNAM ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
prequest, sgeoffset));
DBG_DUMP_FW_REQUEST_FRAME(prequest)
ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
- dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii));
+ dinitprintk((KERN_INFO MYNAM ": FW Upload completed rc=%x \n", ii));
cmdStatus = -EFAULT;
if (ii == 0) {
@@ -2627,10 +2637,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
cmdStatus = 0;
}
}
- dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
+ dinitprintk((MYIOC_s_INFO_FMT ": do_upload cmdStatus=%d \n",
ioc->name, cmdStatus));
-
+
if (cmdStatus) {
ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n",
@@ -2761,8 +2771,8 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
fwSize = (pExtImage->ImageSize + 3) >> 2;
ptrFw = (u32 *)pExtImage;
- ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n",
- ioc->name, fwSize*4, ptrFw, load_addr));
+ ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
+ ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
while (fwSize--) {
@@ -2845,9 +2855,9 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
* 0 else
*
* Returns:
- * 1 - hard reset, READY
- * 0 - no reset due to History bit, READY
- * -1 - no reset due to History bit but not READY
+ * 1 - hard reset, READY
+ * 0 - no reset due to History bit, READY
+ * -1 - no reset due to History bit but not READY
* OR reset but failed to come READY
* -2 - no reset, could not enter DIAG mode
* -3 - reset but bad FW bit
@@ -2990,7 +3000,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
*
*/
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
- mdelay (1);
+ mdelay(1);
/*
* Now hit the reset bit in the Diagnostic register
@@ -3170,7 +3180,7 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
u32 state;
int cntdn, count;
- drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
+ drsprintk((KERN_INFO MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
ioc->name, reset_type));
CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
@@ -3374,6 +3384,9 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
ioc->reply_frames = (MPT_FRAME_HDR *) mem;
ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
+ dinitprintk((KERN_INFO MYNAM ": %s ReplyBuffers @ %p[%p]\n",
+ ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
alloc_dma += reply_sz;
mem += reply_sz;
@@ -3382,7 +3395,7 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
ioc->req_frames = (MPT_FRAME_HDR *) mem;
ioc->req_frames_dma = alloc_dma;
- dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n",
+ dinitprintk((KERN_INFO MYNAM ": %s RequestBuffers @ %p[%p]\n",
ioc->name, mem, (void *)(ulong)alloc_dma));
ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
@@ -3408,7 +3421,7 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
ioc->ChainBuffer = mem;
ioc->ChainBufferDMA = alloc_dma;
- dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n",
+ dinitprintk((KERN_INFO MYNAM " :%s ChainBuffers @ %p(%p)\n",
ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
/* Initialize the free chain Q.
@@ -3513,7 +3526,7 @@ out_fail:
*/
static int
mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
- int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
+ int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
{
MPIDefaultReply_t *mptReply;
int failcnt = 0;
@@ -3588,7 +3601,7 @@ mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
*/
if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
failcnt++;
-
+
dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n",
ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
@@ -3747,7 +3760,7 @@ WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
}
dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
- ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
+ ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
/*
@@ -3819,7 +3832,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
@@ -3863,7 +3876,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
hdr.PageLength = 0;
hdr.PageNumber = 1;
hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
@@ -3930,7 +3943,7 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
@@ -4012,7 +4025,7 @@ GetIoUnitPage2(MPT_ADAPTER *ioc)
hdr.PageLength = 0;
hdr.PageNumber = 2;
hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
@@ -4102,7 +4115,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
header.PageLength = 0;
header.PageNumber = 0;
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = portnum;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4122,6 +4135,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
ioc->spi_data.minSyncFactor = MPT_ASYNC;
ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
rc = 1;
+ ddvprintk((MYIOC_s_INFO_FMT "Unable to read PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
} else {
/* Save the Port Page 0 data
*/
@@ -4131,7 +4146,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
- dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
+ ddvprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
ioc->name, pPP0->Capabilities));
}
ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
@@ -4140,6 +4155,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
ioc->spi_data.minSyncFactor = (u8) (data >> 8);
+ ddvprintk((MYIOC_s_INFO_FMT "PortPage0 minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
} else {
ioc->spi_data.maxSyncOffset = 0;
ioc->spi_data.minSyncFactor = MPT_ASYNC;
@@ -4152,8 +4169,11 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
(ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
- if (ioc->spi_data.minSyncFactor < MPT_ULTRA)
+ if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
ioc->spi_data.minSyncFactor = MPT_ULTRA;
+ ddvprintk((MYIOC_s_INFO_FMT "HVD or SE detected, minSyncFactor=%x\n",
+ ioc->name, ioc->spi_data.minSyncFactor));
+ }
}
}
if (pbuf) {
@@ -4168,7 +4188,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
header.PageLength = 0;
header.PageNumber = 2;
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = portnum;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4236,7 +4256,7 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
header.PageLength = 0;
header.PageNumber = 1;
header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = portnum;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4245,8 +4265,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
if (mpt_config(ioc, &cfg) != 0)
return -EFAULT;
- ioc->spi_data.sdp1version = cfg.hdr->PageVersion;
- ioc->spi_data.sdp1length = cfg.hdr->PageLength;
+ ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
+ ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
header.PageVersion = 0;
header.PageLength = 0;
@@ -4255,8 +4275,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
if (mpt_config(ioc, &cfg) != 0)
return -EFAULT;
- ioc->spi_data.sdp0version = cfg.hdr->PageVersion;
- ioc->spi_data.sdp0length = cfg.hdr->PageLength;
+ ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
+ ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
dcprintk((MYIOC_s_INFO_FMT "Headers: 0: version %d length %d\n",
ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
@@ -4298,7 +4318,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
header.PageLength = 0;
header.PageNumber = 2;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4394,7 +4414,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
header.PageLength = 0;
header.PageNumber = 3;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4446,7 +4466,7 @@ mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
header.PageLength = 0;
header.PageNumber = 4;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4498,7 +4518,7 @@ mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
header.PageLength = 0;
header.PageNumber = 1;
header.PageType = MPI_CONFIG_PAGETYPE_IOC;
- cfg.hdr = &header;
+ cfg.cfghdr.hdr = &header;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4580,13 +4600,13 @@ SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
if (evnp == NULL) {
- dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+ devtprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
ioc->name));
return 0;
}
memset(evnp, 0, sizeof(*evnp));
- dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch));
+ devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
evnp->ChainOffset = 0;
@@ -4610,8 +4630,10 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
EventAck_t *pAck;
if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n",
- ioc->name);
+ printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK "
+ "request frame for Event=%x EventContext=%x EventData=%x!\n",
+ ioc->name, evnp->Event, le32_to_cpu(evnp->EventContext),
+ le32_to_cpu(evnp->Data[0]));
return -1;
}
memset(pAck, 0, sizeof(*pAck));
@@ -4647,10 +4669,11 @@ int
mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
{
Config_t *pReq;
+ ConfigExtendedPageHeader_t *pExtHdr = NULL;
MPT_FRAME_HDR *mf;
unsigned long flags;
int ii, rc;
- u32 flagsLength;
+ int flagsLength;
int in_isr;
/* Prevent calling wait_event() (below), if caller happens
@@ -4675,16 +4698,30 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
pReq->Reserved = 0;
pReq->ChainOffset = 0;
pReq->Function = MPI_FUNCTION_CONFIG;
+
+ /* Assume page type is not extended and clear "reserved" fields. */
pReq->ExtPageLength = 0;
pReq->ExtPageType = 0;
pReq->MsgFlags = 0;
+
for (ii=0; ii < 8; ii++)
pReq->Reserved2[ii] = 0;
- pReq->Header.PageVersion = pCfg->hdr->PageVersion;
- pReq->Header.PageLength = pCfg->hdr->PageLength;
- pReq->Header.PageNumber = pCfg->hdr->PageNumber;
- pReq->Header.PageType = (pCfg->hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+ pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
+ pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
+ pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
+ pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+ pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
+ pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
+ pReq->ExtPageType = pExtHdr->ExtPageType;
+ pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+
+ /* Page Length must be treated as a reserved field for the extended header. */
+ pReq->Header.PageLength = 0;
+ }
+
pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
/* Add a SGE to the config request.
@@ -4694,12 +4731,20 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
else
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
- flagsLength |= pCfg->hdr->PageLength * 4;
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+ flagsLength |= pExtHdr->ExtPageLength * 4;
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+ dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+ ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
+ }
+ else {
+ flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
+
+ dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+ ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+ }
- dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
- ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+ mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
/* Append pCfg pointer to end of mf
*/
@@ -4789,8 +4834,8 @@ mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
pReq->Reserved3 = 0;
pReq->NumAddressBytes = 0x01;
pReq->Reserved4 = 0;
- pReq->DataLength = 0x04;
- pdev = (struct pci_dev *) ioc->pcidev;
+ pReq->DataLength = cpu_to_le16(0x04);
+ pdev = ioc->pcidev;
if (pdev->devfn & 1)
pReq->DeviceAddr = 0xB2;
else
@@ -5504,6 +5549,8 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
* If needed, send (a single) EventAck.
*/
if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
+ devtprintk((MYIOC_s_WARN_FMT
+ "EventAck required\n",ioc->name));
if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
ioc->name, ii));
@@ -5584,7 +5631,7 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
case 0x00080000:
desc = "Outbound DMA Overrun";
break;
-
+
case 0x00090000:
desc = "Task Management";
break;
@@ -5600,7 +5647,7 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
case 0x000C0000:
desc = "Untagged Table Size";
break;
-
+
}
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
@@ -5692,7 +5739,7 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- /* This error is checked in scsi_io_done(). Skip.
+ /* This error is checked in scsi_io_done(). Skip.
desc = "SCSI Data Underrun";
*/
break;
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 848fb236b175..f4827d923731 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -915,7 +915,10 @@ struct scsi_cmnd;
typedef struct _x_config_parms {
struct list_head linkage; /* linked list */
struct timer_list timer; /* timer function for this request */
- ConfigPageHeader_t *hdr;
+ union {
+ ConfigExtendedPageHeader_t *ehdr;
+ ConfigPageHeader_t *hdr;
+ } cfghdr;
dma_addr_t physAddr;
int wait_done; /* wait for this request */
u32 pageAddr; /* properly formatted */
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 05ea5944c487..7577c2417e2e 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -242,7 +242,7 @@ mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
/* Set the command status to GOOD if IOC Status is GOOD
* OR if SCSI I/O cmd and data underrun or recovered error.
*/
- iocStatus = reply->u.reply.IOCStatus & MPI_IOCSTATUS_MASK;
+ iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocStatus == MPI_IOCSTATUS_SUCCESS)
ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
@@ -2324,7 +2324,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
hdr.PageLength = 0;
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
cfg.pageAddr = 0;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -2333,7 +2333,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
strncpy(karg.serial_number, " ", 24);
if (mpt_config(ioc, &cfg) == 0) {
- if (cfg.hdr->PageLength > 0) {
+ if (cfg.cfghdr.hdr->PageLength > 0) {
/* Issue the second config page request */
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
@@ -2479,7 +2479,7 @@ mptctl_hp_targetinfo(unsigned long arg)
hdr.PageNumber = 0;
hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.dir = 0;
cfg.timeout = 0;
@@ -2527,15 +2527,15 @@ mptctl_hp_targetinfo(unsigned long arg)
hdr.PageNumber = 3;
hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &hdr;
+ cfg.cfghdr.hdr = &hdr;
cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
cfg.dir = 0;
cfg.timeout = 0;
cfg.physAddr = -1;
- if ((mpt_config(ioc, &cfg) == 0) && (cfg.hdr->PageLength > 0)) {
+ if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) {
/* Issue the second config page request */
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
- data_sz = (int) cfg.hdr->PageLength * 4;
+ data_sz = (int) cfg.cfghdr.hdr->PageLength * 4;
pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent(
ioc->pcidev, data_sz, &page_dma);
if (pg3_alloc) {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b9d4f78725b4..4a003dc5fde8 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -281,12 +281,12 @@ mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
chain_idx = offset / ioc->req_sz;
rc = SUCCESS;
- dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer (index %d), got buf=%p\n",
- ioc->name, *retIndex, chainBuf));
+ dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
+ ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
} else {
rc = FAILED;
chain_idx = MPT_HOST_NO_CHAIN;
- dfailprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
+ dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
ioc->name));
}
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
@@ -432,7 +432,7 @@ nextSGEset:
*/
pReq->ChainOffset = 0;
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
- dsgprintk((MYIOC_s_ERR_FMT
+ dsgprintk((MYIOC_s_INFO_FMT
"Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
ioc->RequestNB[req_idx] = RequestNB;
}
@@ -491,11 +491,12 @@ nextSGEset:
/* NOTE: psge points to the beginning of the chain element
* in current buffer. Get a chain buffer.
*/
- dsgprintk((MYIOC_s_INFO_FMT
- "calling getFreeChainBuffer SCSI cmd=%02x (%p)\n",
- ioc->name, pReq->CDB[0], SCpnt));
- if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED)
+ if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
+ dfailprintk((MYIOC_s_INFO_FMT
+ "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
+ ioc->name, pReq->CDB[0], SCpnt));
return FAILED;
+ }
/* Update the tracking arrays.
* If chainSge == NULL, update ReqToChain, else ChainToChain
@@ -577,14 +578,20 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
return 1;
}
- dmfprintk((MYIOC_s_INFO_FMT
- "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
- ioc->name, mf, mr, sc, req_idx));
-
sc->result = DID_OK << 16; /* Set default reply as OK */
pScsiReq = (SCSIIORequest_t *) mf;
pScsiReply = (SCSIIOReply_t *) mr;
+ if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
+ dmfprintk((MYIOC_s_INFO_FMT
+ "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
+ ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
+ }else{
+ dmfprintk((MYIOC_s_INFO_FMT
+ "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
+ ioc->name, mf, mr, sc, req_idx));
+ }
+
if (pScsiReply == NULL) {
/* special context reply handling */
;
@@ -658,8 +665,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
/* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
} else if ( xfer_cnt == 0 ) {
- /* A CRC Error causes this condition; retry */
- sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
+ /* A CRC Error causes this condition; retry */
+ sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
(CHECK_CONDITION << 1);
sc->sense_buffer[0] = 0x70;
sc->sense_buffer[2] = NO_SENSE;
@@ -668,7 +675,9 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
} else {
sc->result = DID_SOFT_ERROR << 16;
}
- dreplyprintk((KERN_NOTICE "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->target));
+ dreplyprintk((KERN_NOTICE
+ "RESIDUAL_MISMATCH: result=%x on id=%d\n",
+ sc->result, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
@@ -796,7 +805,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
return 1;
}
-
/*
* mptscsih_flush_running_cmds - For each command found, search
* Scsi_Host instance taskQ and reply to OS.
@@ -1017,7 +1025,7 @@ mptscsih_remove(struct pci_dev *pdev)
scsi_host_put(host);
mpt_detach(pdev);
-
+
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1072,7 +1080,7 @@ mptscsih_resume(struct pci_dev *pdev)
MPT_SCSI_HOST *hd;
mpt_resume(pdev);
-
+
if(!host)
return 0;
@@ -1214,8 +1222,8 @@ mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t off
int size = 0;
if (func) {
- /*
- * write is not supported
+ /*
+ * write is not supported
*/
} else {
if (start)
@@ -1535,17 +1543,17 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
*/
if (mptscsih_tm_pending_wait(hd) == FAILED) {
if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler abort: "
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
- dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler target reset: "
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target reset: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
- dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler bus reset: "
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
@@ -1631,8 +1639,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun
if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
hd->ioc->name));
- //return FAILED;
- return -999;
+ return FAILED;
}
dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
hd->ioc->name, mf));
@@ -1661,9 +1668,8 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun
pScsiTm->TaskMsgContext = ctx2abort;
- dtmprintk((MYIOC_s_INFO_FMT
- "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
- hd->ioc->name, ctx2abort, type));
+ dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
+ hd->ioc->name, ctx2abort, type));
DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
@@ -1902,13 +1908,13 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
/* If we can't locate the host to reset, then we failed. */
if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
+ dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
"Can't locate host! (sc=%p)\n",
SCpnt ) );
return FAILED;
}
- printk(KERN_WARNING MYNAM ": %s: >> Attempting host reset! (sc=%p)\n",
+ printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
hd->ioc->name, SCpnt);
/* If our attempts to reset the host failed, then return a failed
@@ -1924,7 +1930,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
hd->tmState = TM_STATE_NONE;
}
- dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
+ dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
"Status = %s\n",
(status == SUCCESS) ? "SUCCESS" : "FAILED" ) );
@@ -1951,8 +1957,8 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
if (hd->tmState == TM_STATE_NONE) {
hd->tmState = TM_STATE_IN_PROGRESS;
hd->tmPending = 1;
- status = SUCCESS;
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
+ status = SUCCESS;
break;
}
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
@@ -1980,7 +1986,7 @@ mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
if(hd->tmPending == 0) {
status = SUCCESS;
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
+ spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
break;
}
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
@@ -2318,10 +2324,10 @@ mptscsih_slave_configure(struct scsi_device *device)
if (pTarget == NULL) {
/* Driver doesn't know about this device.
* Kernel may generate a "Dummy Lun 0" which
- * may become a real Lun if a
+ * may become a real Lun if a
* "scsi add-single-device" command is executed
- * while the driver is active (hot-plug a
- * device). LSI Raid controllers need
+ * while the driver is active (hot-plug a
+ * device). LSI Raid controllers need
* queue_depth set to DEV_HIGH for this reason.
*/
scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
@@ -2691,7 +2697,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
* If the peripheral qualifier filter is enabled then if the target reports a 0x1
* (i.e. The targer is capable of supporting the specified peripheral device type
* on this logical unit; however, the physical device is not currently connected
- * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
+ * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
* capable of supporting a physical device on this logical unit). This is to work
* around a bug in th emid-layer in some distributions in which the mid-layer will
* continue to try to communicate to the LUN and evntually create a dummy LUN.
@@ -3194,8 +3200,8 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
/* Get a MF for this command.
*/
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
- ioc->name));
+ dfailprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
+ ioc->name));
return -EAGAIN;
}
@@ -3289,7 +3295,7 @@ mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus)
/* Get a MF for this command.
*/
if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
+ dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
ioc->name));
return -EAGAIN;
}
@@ -3447,7 +3453,7 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
* some type of error occurred.
*/
MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
- if (pr->ActionStatus == MPI_RAID_ACTION_ASTATUS_SUCCESS)
+ if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
completionCode = MPT_SCANDV_GOOD;
else
completionCode = MPT_SCANDV_SOME_ERROR;
@@ -3955,7 +3961,7 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
header1.PageLength = ioc->spi_data.sdp1length;
header1.PageNumber = 1;
header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
@@ -3996,9 +4002,9 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = le32_to_cpu(requested);
+ pcfg1Data->RequestedParameters = cpu_to_le32(requested);
pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = le32_to_cpu(configuration);
+ pcfg1Data->Configuration = cpu_to_le32(configuration);
cfg.pageAddr = (bus<<8) | id;
mpt_config(hd->ioc, &cfg);
}
@@ -4353,7 +4359,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
/* Prep cfg structure
*/
cfg.pageAddr = (bus<<8) | id;
- cfg.hdr = NULL;
+ cfg.cfghdr.hdr = NULL;
/* Prep SDP0 header
*/
@@ -4399,7 +4405,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz);
cfg1_dma_addr = dvbuf_dma + sz;
- /* Skip this ID? Set cfg.hdr to force config page write
+ /* Skip this ID? Set cfg.cfghdr.hdr to force config page write
*/
{
ScsiCfgData *pspi_data = &hd->ioc->spi_data;
@@ -4417,7 +4423,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
dv.cmd = MPT_SET_MAX;
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
/* Save the final negotiated settings to
* SCSI device page 1.
@@ -4483,7 +4489,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
dv.cmd = MPT_SET_MIN;
mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
@@ -4596,8 +4602,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
if ((pbuf1[56] & 0x02) == 0) {
pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
- "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
+ ddvprintk((MYIOC_s_NOTE_FMT
+ "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
ioc->name, id, pbuf1[56]));
}
}
@@ -4637,7 +4643,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
u32 sdp0_info;
u32 sdp0_nego;
- cfg.hdr = &header0;
+ cfg.cfghdr.hdr = &header0;
cfg.physAddr = cfg0_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.dir = 0;
@@ -4673,7 +4679,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
if (!firstPass)
doFallback = 1;
} else {
- ddvprintk((MYIOC_s_NOTE_FMT
+ ddvprintk((MYIOC_s_NOTE_FMT
"DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id));
hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
mptscsih_initTarget(hd,
@@ -4689,8 +4695,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
} else if (rc == MPT_SCANDV_ISSUE_SENSE)
doFallback = 1; /* set fallback flag */
- else if ((rc == MPT_SCANDV_DID_RESET) ||
- (rc == MPT_SCANDV_SENSE) ||
+ else if ((rc == MPT_SCANDV_DID_RESET) ||
+ (rc == MPT_SCANDV_SENSE) ||
(rc == MPT_SCANDV_FALLBACK))
doFallback = 1; /* set fallback flag */
else
@@ -4722,7 +4728,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
* 4) release
* 5) update nego parms to target struct
*/
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
@@ -5121,12 +5127,12 @@ target_done:
/* Set if cfg1_dma_addr contents is valid
*/
- if ((cfg.hdr != NULL) && (retcode == 0)){
+ if ((cfg.cfghdr.hdr != NULL) && (retcode == 0)){
/* If disk, not U320, disable QAS
*/
if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
+ ddvprintk((MYIOC_s_NOTE_FMT
"noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor));
}
@@ -5137,7 +5143,7 @@ target_done:
* skip save of the final negotiated settings to
* SCSI device page 1.
*
- cfg.hdr = &header1;
+ cfg.cfghdr.hdr = &header1;
cfg.physAddr = cfg1_dma_addr;
cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
cfg.dir = 1;
@@ -5248,7 +5254,7 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
/* Update tmax values with those from Device Page 0.*/
pPage0 = (SCSIDevicePage0_t *) pPage;
if (pPage0) {
- val = cpu_to_le32(pPage0->NegotiatedParameters);
+ val = le32_to_cpu(pPage0->NegotiatedParameters);
dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
@@ -5276,12 +5282,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
dv->now.offset, &val, &configuration, dv->now.flags);
dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
- ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x request=%x configuration=%x\n",
+ ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
break;
@@ -5301,9 +5307,9 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
offset, &val, &configuration, negoFlags);
dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
id, width, factor, offset, negoFlags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
id, width, factor, offset, val, configuration, negoFlags));
@@ -5377,12 +5383,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
if (pPage1) {
mptscsih_setDevicePage1Flags (width, factor, offset, &val,
&configuration, dv->now.flags);
- dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x flags=%x request=%x config=%x\n",
+ dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
id, width, offset, factor, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index dfa8806b1e13..587d1274fd74 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -162,15 +162,15 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
u8 *mem;
int error=0;
int r;
-
+
if ((r = mpt_attach(pdev,id)) != 0)
return r;
-
+
ioc = pci_get_drvdata(pdev);
ioc->DoneCtx = mptspiDoneCtx;
ioc->TaskCtx = mptspiTaskCtx;
ioc->InternalCtx = mptspiInternalCtx;
-
+
/* Added sanity check on readiness of the MPT adapter.
*/
if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
OpenPOWER on IntegriCloud