diff options
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/dvb/frontends/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/dvb-pll.c | 16 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/dvb-pll.h | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/lgdt330x.c | 514 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/lgdt330x.h | 16 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/lgdt330x_priv.h | 8 | ||||
| -rw-r--r-- | drivers/media/video/bttv-cards.c | 8 | ||||
| -rw-r--r-- | drivers/media/video/bttv-driver.c | 33 | ||||
| -rw-r--r-- | drivers/media/video/bttv.h | 6 | ||||
| -rw-r--r-- | drivers/media/video/bttvp.h | 4 | ||||
| -rw-r--r-- | drivers/media/video/cx88/cx88-cards.c | 33 | ||||
| -rw-r--r-- | drivers/media/video/cx88/cx88-dvb.c | 26 | ||||
| -rw-r--r-- | drivers/media/video/cx88/cx88-video.c | 4 | ||||
| -rw-r--r-- | drivers/media/video/cx88/cx88.h | 3 | ||||
| -rw-r--r-- | drivers/media/video/msp3400.c | 4 | ||||
| -rw-r--r-- | drivers/media/video/saa7134/saa7134-i2c.c | 4 | ||||
| -rw-r--r-- | drivers/media/video/saa7134/saa7134.h | 4 | ||||
| -rw-r--r-- | drivers/media/video/tea5767.c | 26 | ||||
| -rw-r--r-- | drivers/media/video/tuner-core.c | 29 | ||||
| -rw-r--r-- | drivers/media/video/tuner-simple.c | 8 | ||||
| -rw-r--r-- | drivers/media/video/tveeprom.c | 2 |
21 files changed, 539 insertions, 212 deletions
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index e83256d0fd14..a50a41f6f79d 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -188,7 +188,7 @@ config DVB_BCM3510 support this frontend. config DVB_LGDT330X - tristate "LGDT3302 or LGDT3303 based (DViCO FusionHDTV Gold)" + tristate "LG Electronics LGDT3302/LGDT3303 based" depends on DVB_CORE help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 5264310c070e..536c35d969b7 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -225,6 +225,22 @@ struct dvb_pll_desc dvb_pll_tua6034 = { }; EXPORT_SYMBOL(dvb_pll_tua6034); +/* Infineon TUA6034 + * used in LG Innotek TDVS-H062F + */ +struct dvb_pll_desc dvb_pll_tdvs_tua6034 = { + .name = "LG/Infineon TUA6034", + .min = 54000000, + .max = 863000000, + .count = 3, + .entries = { + { 160000000, 44000000, 62500, 0xce, 0x01 }, + { 455000000, 44000000, 62500, 0xce, 0x02 }, + { 999999999, 44000000, 62500, 0xce, 0x04 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_tdvs_tua6034); + /* Philips FMD1216ME * used in Medion Hybrid PCMCIA card and USB Box */ diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index cb794759d89e..205b2d1a8852 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -31,6 +31,7 @@ extern struct dvb_pll_desc dvb_pll_unknown_1; extern struct dvb_pll_desc dvb_pll_tua6010xs; extern struct dvb_pll_desc dvb_pll_env57h1xd5; extern struct dvb_pll_desc dvb_pll_tua6034; +extern struct dvb_pll_desc dvb_pll_tdvs_tua6034; extern struct dvb_pll_desc dvb_pll_tda665x; extern struct dvb_pll_desc dvb_pll_fmd1216me; extern struct dvb_pll_desc dvb_pll_tded4; diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index e94dee50eecd..1f1cd7a8d500 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -1,11 +1,8 @@ /* - * Support for LGDT3302 & LGDT3303 (DViCO FusionHDTV Gold) - VSB/QAM + * Support for LGDT3302 and LGDT3303 - VSB/QAM * * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * - * Based on code from Kirk Lapray <kirk_lapray@bigfoot.com> - * Copyright (C) 2005 - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -25,11 +22,13 @@ /* * NOTES ABOUT THIS DRIVER * - * This driver supports DViCO FusionHDTV Gold under Linux. + * This Linux driver supports: + * DViCO FusionHDTV 3 Gold-Q + * DViCO FusionHDTV 3 Gold-T + * DViCO FusionHDTV 5 Gold * * TODO: - * BER and signal strength always return 0. - * Include support for LGDT3303 + * signal strength always returns 0. * */ @@ -41,7 +40,6 @@ #include <asm/byteorder.h> #include "dvb_frontend.h" -#include "dvb-pll.h" #include "lgdt330x_priv.h" #include "lgdt330x.h" @@ -70,55 +68,37 @@ struct lgdt330x_state u32 current_frequency; }; -static int i2c_writebytes (struct lgdt330x_state* state, - u8 addr, /* demod_address or pll_address */ +static int i2c_write_demod_bytes (struct lgdt330x_state* state, u8 *buf, /* data bytes to send */ int len /* number of bytes to send */ ) { - u8 tmp[] = { buf[0], buf[1] }; struct i2c_msg msg = - { .addr = addr, .flags = 0, .buf = tmp, .len = 2 }; - int err; + { .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 }; int i; + int err; - for (i=1; i<len; i++) { - tmp[1] = buf[i]; + for (i=0; i<len-1; i+=2){ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); + printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, msg.buf[0], msg.buf[1], err); if (err < 0) return err; else return -EREMOTEIO; } - tmp[0]++; + msg.buf += 2; } return 0; } -#if 0 -static int i2c_readbytes (struct lgdt330x_state* state, - u8 addr, /* demod_address or pll_address */ - u8 *buf, /* holds data bytes read */ - int len /* number of bytes to read */ ) -{ - struct i2c_msg msg = - { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; - int err; - - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x, err == %i)\n", __FUNCTION__, addr, err); - return -EREMOTEIO; - } - return 0; -} -#endif - /* * This routine writes the register (reg) to the demod bus * then reads the data returned for (len) bytes. */ -static u8 i2c_selectreadbytes (struct lgdt330x_state* state, +static u8 i2c_read_demod_bytes (struct lgdt330x_state* state, enum I2C_REG reg, u8* buf, int len) { u8 wr [] = { reg }; @@ -139,7 +119,7 @@ static u8 i2c_selectreadbytes (struct lgdt330x_state* state, } /* Software reset */ -int lgdt330x_SwReset(struct lgdt330x_state* state) +static int lgdt3302_SwReset(struct lgdt330x_state* state) { u8 ret; u8 reset[] = { @@ -148,23 +128,51 @@ int lgdt330x_SwReset(struct lgdt330x_state* state) * bits 5-0 are 1 to mask interrupts */ }; - ret = i2c_writebytes(state, - state->config->demod_address, + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + if (ret == 0) { + + /* force reset high (inactive) and unmask interrupts */ + reset[1] = 0x7f; + ret = i2c_write_demod_bytes(state, + reset, sizeof(reset)); + } + return ret; +} + +static int lgdt3303_SwReset(struct lgdt330x_state* state) +{ + u8 ret; + u8 reset[] = { + 0x02, + 0x00 /* bit 0 is active low software reset */ + }; + + ret = i2c_write_demod_bytes(state, reset, sizeof(reset)); if (ret == 0) { - /* spec says reset takes 100 ns why wait */ - /* mdelay(100); */ /* keep low for 100mS */ - reset[1] = 0x7f; /* force reset high (inactive) - * and unmask interrupts */ - ret = i2c_writebytes(state, - state->config->demod_address, + + /* force reset high (inactive) */ + reset[1] = 0x01; + ret = i2c_write_demod_bytes(state, reset, sizeof(reset)); } - /* Spec does not indicate a need for this either */ - /*mdelay(5); */ /* wait 5 msec before doing more */ return ret; } +static int lgdt330x_SwReset(struct lgdt330x_state* state) +{ + switch (state->config->demod_chip) { + case LGDT3302: + return lgdt3302_SwReset(state); + case LGDT3303: + return lgdt3303_SwReset(state); + default: + return -ENODEV; + } +} + + static int lgdt330x_init(struct dvb_frontend* fe) { /* Hardware reset is done using gpio[0] of cx23880x chip. @@ -173,22 +181,98 @@ static int lgdt330x_init(struct dvb_frontend* fe) * Maybe there needs to be a callable function in cx88-core or * the caller of this function needs to do it. */ - dprintk("%s entered\n", __FUNCTION__); - return lgdt330x_SwReset((struct lgdt330x_state*) fe->demodulator_priv); + /* + * Array of byte pairs <address, value> + * to initialize each different chip + */ + static u8 lgdt3302_init_data[] = { + /* Use 50MHz parameter values from spec sheet since xtal is 50 */ + /* Change the value of NCOCTFV[25:0] of carrier + recovery center frequency register */ + VSB_CARRIER_FREQ0, 0x00, + VSB_CARRIER_FREQ1, 0x87, + VSB_CARRIER_FREQ2, 0x8e, + VSB_CARRIER_FREQ3, 0x01, + /* Change the TPCLK pin polarity + data is valid on falling clock */ + DEMUX_CONTROL, 0xfb, + /* Change the value of IFBW[11:0] of + AGC IF/RF loop filter bandwidth register */ + AGC_RF_BANDWIDTH0, 0x40, + AGC_RF_BANDWIDTH1, 0x93, + AGC_RF_BANDWIDTH2, 0x00, + /* Change the value of bit 6, 'nINAGCBY' and + 'NSSEL[1:0] of ACG function control register 2 */ + AGC_FUNC_CTRL2, 0xc6, + /* Change the value of bit 6 'RFFIX' + of AGC function control register 3 */ + AGC_FUNC_CTRL3, 0x40, + /* Set the value of 'INLVTHD' register 0x2a/0x2c + to 0x7fe */ + AGC_DELAY0, 0x07, + AGC_DELAY2, 0xfe, + /* Change the value of IAGCBW[15:8] + of inner AGC loop filter bandwith */ + AGC_LOOP_BANDWIDTH0, 0x08, + AGC_LOOP_BANDWIDTH1, 0x9a + }; + + static u8 lgdt3303_init_data[] = { + 0x4c, 0x14 + }; + + struct lgdt330x_state* state = fe->demodulator_priv; + char *chip_name; + int err; + + switch (state->config->demod_chip) { + case LGDT3302: + chip_name = "LGDT3302"; + err = i2c_write_demod_bytes(state, lgdt3302_init_data, + sizeof(lgdt3302_init_data)); + break; + case LGDT3303: + chip_name = "LGDT3303"; + err = i2c_write_demod_bytes(state, lgdt3303_init_data, + sizeof(lgdt3303_init_data)); + break; + default: + chip_name = "undefined"; + printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } + dprintk("%s entered as %s\n", __FUNCTION__, chip_name); + if (err < 0) + return err; + return lgdt330x_SwReset(state); } static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber) { - *ber = 0; /* Dummy out for now */ + *ber = 0; /* Not supplied by the demod chips */ return 0; } static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + struct lgdt330x_state* state = fe->demodulator_priv; + int err; u8 buf[2]; - i2c_selectreadbytes(state, PACKET_ERR_COUNTER1, buf, sizeof(buf)); + switch (state->config->demod_chip) { + case LGDT3302: + err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + case LGDT3303: + err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1, + buf, sizeof(buf)); + break; + default: + printk(KERN_WARNING + "Only LGDT3302 and LGDT3303 are supported chips.\n"); + err = -ENODEV; + } *ucblocks = (buf[0] << 8) | buf[1]; return 0; @@ -197,123 +281,113 @@ static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int lgdt330x_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { - struct lgdt330x_state* state = - (struct lgdt330x_state*) fe->demodulator_priv; + /* + * Array of byte pairs <address, value> + * to initialize 8VSB for lgdt3303 chip 50 MHz IF + */ + static u8 lgdt3303_8vsb_44_data[] = { + 0x04, 0x00, + 0x0d, 0x40, + 0x0e, 0x87, + 0x0f, 0x8e, + 0x10, 0x01, + 0x47, 0x8b }; + + /* + * Array of byte pairs <address, value> + * to initialize QAM for lgdt3303 chip + */ + static u8 lgdt3303_qam_data[] = { + 0x04, 0x00, + 0x0d, 0x00, + 0x0e, 0x00, + 0x0f, 0x00, + 0x10, 0x00, + 0x51, 0x63, + 0x47, 0x66, + 0x48, 0x66, + 0x4d, 0x1a, + 0x49, 0x08, + 0x4a, 0x9b }; + + struct lgdt330x_state* state = fe->demodulator_priv; - /* Use 50MHz parameter values from spec sheet since xtal is 50 */ static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 }; - static u8 vsb_freq_cfg[] = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 }; - static u8 demux_ctrl_cfg[] = { DEMUX_CONTROL, 0xfb }; - static u8 agc_rf_cfg[] = { AGC_RF_BANDWIDTH0, 0x40, 0x93, 0x00 }; - static u8 agc_ctrl_cfg[] = { AGC_FUNC_CTRL2, 0xc6, 0x40 }; - static u8 agc_delay_cfg[] = { AGC_DELAY0, 0x07, 0x00, 0xfe }; - static u8 agc_loop_cfg[] = { AGC_LOOP_BANDWIDTH0, 0x08, 0x9a }; + int err; /* Change only if we are actually changing the modulation */ if (state->current_modulation != param->u.vsb.modulation) { switch(param->u.vsb.modulation) { case VSB_8: dprintk("%s: VSB_8 MODE\n", __FUNCTION__); - /* Select VSB mode and serial MPEG interface */ - top_ctrl_cfg[1] = 0x07; + /* Select VSB mode */ + top_ctrl_cfg[1] = 0x03; /* Select ANT connector if supported by card */ if (state->config->pll_rf_set) state->config->pll_rf_set(fe, 1); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data, + sizeof(lgdt3303_8vsb_44_data)); + } break; case QAM_64: dprintk("%s: QAM_64 MODE\n", __FUNCTION__); - /* Select QAM_64 mode and serial MPEG interface */ - top_ctrl_cfg[1] = 0x04; + /* Select QAM_64 mode */ + top_ctrl_cfg[1] = 0x00; /* Select CABLE connector if supported by card */ if (state->config->pll_rf_set) state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } break; case QAM_256: dprintk("%s: QAM_256 MODE\n", __FUNCTION__); - /* Select QAM_256 mode and serial MPEG interface */ - top_ctrl_cfg[1] = 0x05; + /* Select QAM_256 mode */ + top_ctrl_cfg[1] = 0x01; /* Select CABLE connector if supported by card */ if (state->config->pll_rf_set) state->config->pll_rf_set(fe, 0); + + if (state->config->demod_chip == LGDT3303) { + err = i2c_write_demod_bytes(state, lgdt3303_qam_data, + sizeof(lgdt3303_qam_data)); + } break; default: printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation); return -1; } - /* Initializations common to all modes */ + /* + * select serial or parallel MPEG harware interface + * Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303 + * Parallel: 0x00 + */ + top_ctrl_cfg[1] |= state->config->serial_mpeg; /* Select the requested mode */ - i2c_writebytes(state, state->config->demod_address, - top_ctrl_cfg, sizeof(top_ctrl_cfg)); - - /* Change the value of IFBW[11:0] - of AGC IF/RF loop filter bandwidth register */ - i2c_writebytes(state, state->config->demod_address, - agc_rf_cfg, sizeof(agc_rf_cfg)); - - /* Change the value of bit 6, 'nINAGCBY' and - 'NSSEL[1:0] of ACG function control register 2 */ - /* Change the value of bit 6 'RFFIX' - of AGC function control register 3 */ - i2c_writebytes(state, state->config->demod_address, - agc_ctrl_cfg, sizeof(agc_ctrl_cfg)); - - /* Change the TPCLK pin polarity - data is valid on falling clock */ - i2c_writebytes(state, state->config->demod_address, - demux_ctrl_cfg, sizeof(demux_ctrl_cfg)); - - /* Change the value of NCOCTFV[25:0] of carrier - recovery center frequency register */ - i2c_writebytes(state, state->config->demod_address, - vsb_freq_cfg, sizeof(vsb_freq_cfg)); - - /* Set the value of 'INLVTHD' register 0x2a/0x2c to 0x7fe */ - i2c_writebytes(state, state->config->demod_address, - agc_delay_cfg, sizeof(agc_delay_cfg)); - - /* Change the value of IAGCBW[15:8] - of inner AGC loop filter bandwith */ - i2c_writebytes(state, state->config->demod_address, - agc_loop_cfg, sizeof(agc_loop_cfg)); - + i2c_write_demod_bytes(state, top_ctrl_cfg, + sizeof(top_ctrl_cfg)); state->config->set_ts_params(fe, 0); state->current_modulation = param->u.vsb.modulation; } /* Change only if we are actually changing the channel */ if (state->current_frequency != param->frequency) { - u8 buf[5]; - struct i2c_msg msg = { .flags = 0, .buf = &buf[1], .len = 4 }; - int err; - - state->config->pll_set(fe, param, buf); - msg.addr = buf[0]; - - dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x " - "0x%02x 0x%02x\n", __FUNCTION__, - buf[0],buf[1],buf[2],buf[3],buf[4]); - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err); - if (err < 0) - return err; - else - return -EREMOTEIO; - } -#if 0 - /* Check the status of the tuner pll */ - i2c_readbytes(state, buf[0], &buf[1], 1); - dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[1]); -#endif - /* Update current frequency */ + /* Tune to the new frequency */ + state->config->pll_set(fe, param); + /* Keep track of the new frequency */ state->current_frequency = param->frequency; } lgdt330x_SwReset(state); @@ -328,21 +402,15 @@ static int lgdt330x_get_frontend(struct dvb_frontend* fe, return 0; } -static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + struct lgdt330x_state* state = fe->demodulator_priv; u8 buf[3]; *status = 0; /* Reset status result */ - /* - * You must set the Mask bits to 1 in the IRQ_MASK in order - * to see that status bit in the IRQ_STATUS register. - * This is done in SwReset(); - */ - /* AGC status register */ - i2c_selectreadbytes(state, AGC_STATUS, buf, 1); + i2c_read_demod_bytes(state, AGC_STATUS, buf, 1); dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); if ((buf[0] & 0x0c) == 0x8){ /* Test signal does not exist flag */ @@ -353,16 +421,15 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } + /* + * You must set the Mask bits to 1 in the IRQ_MASK in order + * to see that status bit in the IRQ_STATUS register. + * This is done in SwReset(); + */ /* signal status */ - i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf)); + i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf)); dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]); -#if 0 - /* Alternative method to check for a signal */ - /* using the SNR good/bad interrupts. */ - if ((buf[2] & 0x30) == 0x10) - *status |= FE_HAS_SIGNAL; -#endif /* sync status */ if ((buf[2] & 0x03) == 0x01) { @@ -376,7 +443,7 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) } /* Carrier Recovery Lock Status Register */ - i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1); + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); switch (state->current_modulation) { case QAM_256: @@ -396,13 +463,75 @@ static int lgdt330x_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } +static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt330x_state* state = fe->demodulator_priv; + int err; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* lgdt3303 AGC status register */ + err = i2c_read_demod_bytes(state, 0x58, buf, 1); + if (err < 0) + return err; + + dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0x21) == 0x01){ + /* Test input signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } else { + /* Without a signal all other status bits are meaningless */ + return 0; + } + + /* Carrier Recovery Lock Status Register */ + i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to undestand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x8a, buf, 1); + if ((buf[0] & 0x04) == 0x04) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) + *status |= FE_HAS_LOCK; + if ((buf[0] & 0x08) == 0x08) + *status |= FE_HAS_VITERBI; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + else + break; + i2c_read_demod_bytes(state, 0x38, buf, 1); + if ((buf[0] & 0x02) == 0x00) + *status |= FE_HAS_SYNC; + if ((buf[0] & 0x01) == 0x01) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + break; + default: + printk("KERN_WARNING lgdt330x: %s: Modulation set to unsupported value\n", __FUNCTION__); + } + return 0; +} + static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength) { /* not directly available. */ + *strength = 0; return 0; } -static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) +static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) { #ifdef SNR_IN_DB /* @@ -451,7 +580,7 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) 91, 115, 144, 182, 229, 288, 362, 456, 574, 722, 909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216, 9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151, - 90833, 114351, 143960, 181235, 228161, 0x040000 + 90833, 114351, 143960, 181235, 228161, 0x080000 }; static u8 buf[5];/* read data buffer */ @@ -459,8 +588,8 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) static u32 snr_db; /* index into SNR_EQ[] */ struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; - /* read both equalizer and pase tracker noise data */ - i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + /* read both equalizer and phase tracker noise data */ + i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf)); if (state->current_modulation == VSB_8) { /* Equalizer Mean-Square Error Register for VSB */ @@ -496,19 +625,20 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; /* read both equalizer and pase tracker noise data */ - i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf)); if (state->current_modulation == VSB_8) { - /* Equalizer Mean-Square Error Register for VSB */ - noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; - } else { - /* Phase Tracker Mean-Square Error Register for QAM */ + /* Phase Tracker Mean-Square Error Register for VSB */ noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + } else { + + /* Carrier Recovery Mean-Square Error for QAM */ + i2c_read_demod_bytes(state, 0x1a, buf, 2); + noise = ((buf[0] & 3) << 8) | buf[1]; } /* Small values for noise mean signal is better so invert noise */ - /* Noise is 19 bit value so discard 3 LSB*/ - *snr = ~noise>>3; + *snr = ~noise; #endif dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); @@ -516,6 +646,32 @@ static int lgdt330x_read_snr(struct dvb_frontend* fe, u16* snr) return 0; } +static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr) +{ + /* Return the raw noise value */ + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv; + + if (state->current_modulation == VSB_8) { + + /* Phase Tracker Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4]; + } else { + + /* Carrier Recovery Mean-Square Error for QAM */ + i2c_read_demod_bytes(state, 0x1a, buf, 2); + noise = (buf[0] << 8) | buf[1]; + } + + /* Small values for noise mean signal is better so invert noise */ + *snr = ~noise; + + dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); + + return 0; +} + static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) { /* I have no idea about this - it may not be needed */ @@ -531,7 +687,8 @@ static void lgdt330x_release(struct dvb_frontend* fe) kfree(state); } -static struct dvb_frontend_ops lgdt330x_ops; +static struct dvb_frontend_ops lgdt3302_ops; +static struct dvb_frontend_ops lgdt3303_ops; struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, struct i2c_adapter* i2c) @@ -548,9 +705,19 @@ struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, /* Setup the state */ state->config = config; state->i2c = i2c; - memcpy(&state->ops, &lgdt330x_ops, sizeof(struct dvb_frontend_ops)); + switch (config->demod_chip) { + case LGDT3302: + memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops)); + break; + case LGDT3303: + memcpy(&state->ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops)); + break; + default: + goto error; + } + /* Verify communication with demod chip */ - if (i2c_selectreadbytes(state, 2, buf, 1)) + if (i2c_read_demod_bytes(state, 2, buf, 1)) goto error; state->current_frequency = -1; @@ -568,9 +735,33 @@ error: return NULL; } -static struct dvb_frontend_ops lgdt330x_ops = { +static struct dvb_frontend_ops lgdt3302_ops = { + .info = { + .name= "LG Electronics LGDT3302 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + /* Symbol rate is for all VSB modes need to check QAM */ + .symbol_rate_min = 10762000, + .symbol_rate_max = 10762000, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt330x_init, + .set_frontend = lgdt330x_set_parameters, + .get_frontend = lgdt330x_get_frontend, + .get_tune_settings = lgdt330x_get_tune_settings, + .read_status = lgdt3302_read_status, + .read_ber = lgdt330x_read_ber, + .read_signal_strength = lgdt330x_read_signal_strength, + .read_snr = lgdt3302_read_snr, + .read_ucblocks = lgdt330x_read_ucblocks, + .release = lgdt330x_release, +}; + +static struct dvb_frontend_ops lgdt3303_ops = { .info = { - .name= "LG Electronics lgdt330x VSB/QAM Frontend", + .name= "LG Electronics LGDT3303 VSB/QAM Frontend", .type = FE_ATSC, .frequency_min= 54000000, .frequency_max= 858000000, @@ -584,15 +775,15 @@ static struct dvb_frontend_ops lgdt330x_ops = { .set_frontend = lgdt330x_set_parameters, .get_frontend = lgdt330x_get_frontend, .get_tune_settings = lgdt330x_get_tune_settings, - .read_status = lgdt330x_read_status, + .read_status = lgdt3303_read_status, .read_ber = lgdt330x_read_ber, .read_signal_strength = lgdt330x_read_signal_strength, - .read_snr = lgdt330x_read_snr, + .read_snr = lgdt3303_read_snr, .read_ucblocks = lgdt330x_read_ucblocks, .release = lgdt330x_release, }; -MODULE_DESCRIPTION("lgdt330x [DViCO FusionHDTV 3 Gold] (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); MODULE_AUTHOR("Wilson Michaels"); MODULE_LICENSE("GPL"); @@ -601,6 +792,5 @@ EXPORT_SYMBOL(lgdt330x_attach); /* * Local variables: * c-basic-offset: 8 - * compile-command: "make DVB=1" * End: */ diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h index 04986f8e7565..e209ba1e47c5 100644 --- a/drivers/media/dvb/frontends/lgdt330x.h +++ b/drivers/media/dvb/frontends/lgdt330x.h @@ -1,5 +1,5 @@ /* - * Support for LGDT3302 & LGDT3303 (DViCO FustionHDTV Gold) - VSB/QAM + * Support for LGDT3302 and LGDT3303 - VSB/QAM * * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * @@ -24,14 +24,26 @@ #include <linux/dvb/frontend.h> +typedef enum lg_chip_t { + UNDEFINED, + LGDT3302, + LGDT3303 +}lg_chip_type; + struct lgdt330x_config { /* The demodulator's i2c address */ u8 demod_address; + /* LG demodulator chip LGDT3302 or LGDT3303 */ + lg_chip_type demod_chip; + + /* MPEG hardware interface - 0:parallel 1:serial */ + int serial_mpeg; + /* PLL interface */ int (*pll_rf_set) (struct dvb_frontend* fe, int index); - int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address); + int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params); /* Need to set device param for start_dma */ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); diff --git a/drivers/media/dvb/frontends/lgdt330x_priv.h b/drivers/media/dvb/frontends/lgdt330x_priv.h index 4143ce8f1a95..59b7c5b9012d 100644 --- a/drivers/media/dvb/frontends/lgdt330x_priv.h +++ b/drivers/media/dvb/frontends/lgdt330x_priv.h @@ -1,5 +1,5 @@ /* - * Support for LGDT3302 & LGDT3303 (DViCO FustionHDTV Gold) - VSB/QAM + * Support for LGDT3302 and LGDT3303 - VSB/QAM * * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> * @@ -57,8 +57,10 @@ enum I2C_REG { PH_ERR1= 0x4a, PH_ERR2= 0x4b, DEMUX_CONTROL= 0x66, - PACKET_ERR_COUNTER1= 0x6a, - PACKET_ERR_COUNTER2= 0x6b, + LGDT3302_PACKET_ERR_COUNTER1= 0x6a, + LGDT3302_PACKET_ERR_COUNTER2= 0x6b, + LGDT3303_PACKET_ERR_COUNTER1= 0x8b, + LGDT3303_PACKET_ERR_COUNTER2= 0x8c, }; #endif /* _LGDT330X_PRIV_ */ diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index 6c52fd0bb7df..a97b9b958ed6 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -95,7 +95,7 @@ static int __devinit pvr_boot(struct bttv *btv); static unsigned int triton1=0; static unsigned int vsfx=0; static unsigned int latency = UNSET; -static unsigned int no_overlay=-1; +int no_overlay=-1; static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; @@ -4296,9 +4296,11 @@ void __devinit bttv_check_chipset(void) printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); if (pcipci_fail) { printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n"); - if (UNSET == no_overlay) { - printk(KERN_WARNING "bttv: going to disable overlay.\n"); + if (!no_overlay) { + printk(KERN_WARNING "bttv: overlay will be disabled.\n"); no_overlay = 1; + } else { + printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n"); } } if (UNSET != latency) diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c index 51a0f6d68e73..eee9322ce21b 100644 --- a/drivers/media/video/bttv-driver.c +++ b/drivers/media/video/bttv-driver.c @@ -1,5 +1,5 @@ /* - $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $ + $Id: bttv-driver.c,v 1.52 2005/08/04 00:55:16 mchehab Exp $ bttv - Bt848 frame grabber driver @@ -80,6 +80,7 @@ static unsigned int irq_iswitch = 0; static unsigned int uv_ratio = 50; static unsigned int full_luma_range = 0; static unsigned int coring = 0; +extern int no_overlay; /* API features (turn on/off stuff for testing) */ static unsigned int v4l2 = 1; @@ -2151,6 +2152,10 @@ static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv, return 0; } case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (no_overlay > 0) { + printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } return setup_window(fh, btv, &f->fmt.win, 1); case V4L2_BUF_TYPE_VBI_CAPTURE: retval = bttv_switch_type(fh,f->type); @@ -2224,9 +2229,11 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, /* others */ cap->type = VID_TYPE_CAPTURE| VID_TYPE_TUNER| - VID_TYPE_OVERLAY| VID_TYPE_CLIPPING| VID_TYPE_SCALES; + if (no_overlay <= 0) + cap->type |= VID_TYPE_OVERLAY; + cap->maxwidth = bttv_tvnorms[btv->tvnorm].swidth; cap->maxheight = bttv_tvnorms[btv->tvnorm].sheight; cap->minwidth = 48; @@ -2302,6 +2309,11 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, struct video_window *win = arg; struct v4l2_window w2; + if (no_overlay > 0) { + printk ("VIDIOCSWIN: no_overlay\n"); + return -EINVAL; + } + w2.field = V4L2_FIELD_ANY; w2.w.left = win->x; w2.w.top = win->y; @@ -2577,10 +2589,12 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, cap->version = BTTV_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + if (no_overlay <= 0) + cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; + if (bttv_tvcards[btv->c.type].tuner != UNSET && bttv_tvcards[btv->c.type].tuner != TUNER_ABSENT) cap->capabilities |= V4L2_CAP_TUNER; @@ -3076,7 +3090,7 @@ static struct file_operations bttv_fops = static struct video_device bttv_video_template = { .name = "UNSET", - .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY| + .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER| VID_TYPE_CLIPPING|VID_TYPE_SCALES, .hardware = VID_HARDWARE_BT848, .fops = &bttv_fops, @@ -3756,6 +3770,12 @@ static void bttv_unregister_video(struct bttv *btv) /* register video4linux devices */ static int __devinit bttv_register_video(struct bttv *btv) { + if (no_overlay <= 0) { + bttv_video_template.type |= VID_TYPE_OVERLAY; + } else { + printk("bttv: Overlay support disabled.\n"); + } + /* video */ btv->video_dev = vdev_init(btv, &bttv_video_template, "video"); if (NULL == btv->video_dev) @@ -3869,11 +3889,6 @@ static int __devinit bttv_probe(struct pci_dev *dev, pci_set_master(dev); pci_set_command(dev); pci_set_drvdata(dev,btv); - if (!pci_dma_supported(dev,0xffffffff)) { - printk("bttv%d: Oops: no 32bit PCI DMA ???\n", btv->c.nr); - result = -EIO; - goto fail1; - } pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision); pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h index 191eaf1714ba..f2af9e1454f0 100644 --- a/drivers/media/video/bttv.h +++ b/drivers/media/video/bttv.h @@ -1,5 +1,5 @@ /* - * $Id: bttv.h,v 1.18 2005/05/24 23:41:42 nsh Exp $ + * $Id: bttv.h,v 1.22 2005/07/28 18:41:21 mchehab Exp $ * * bttv - Bt848 frame grabber driver * @@ -135,7 +135,9 @@ #define BTTV_DVICO_DVBT_LITE 0x80 #define BTTV_TIBET_CS16 0x83 #define BTTV_KODICOM_4400R 0x84 -#define BTTV_ADLINK_RTV24 0x85 +#define BTTV_ADLINK_RTV24 0x86 +#define BTTV_DVICO_FUSIONHDTV_5_LITE 0x87 +#define BTTV_ACORP_Y878F 0x88 /* i2c address list */ #define I2C_TSA5522 0xc2 diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h index f3293e4a15ad..aab094bc243d 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bttvp.h @@ -1,5 +1,5 @@ /* - $Id: bttvp.h,v 1.19 2005/06/16 21:38:45 nsh Exp $ + $Id: bttvp.h,v 1.21 2005/07/15 21:44:14 mchehab Exp $ bttv - Bt848 frame grabber driver @@ -27,7 +27,7 @@ #define _BTTVP_H_ #include <linux/version.h> -#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,15) +#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,16) #include <linux/types.h> #include <linux/wait.h> diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 3d0c784b376f..ebf02a7f81e8 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1,5 +1,5 @@ /* - * $Id: cx88-cards.c,v 1.86 2005/07/14 03:06:43 mchehab Exp $ + * $Id: cx88-cards.c,v 1.90 2005/07/28 02:47:42 mkrufky Exp $ * * device driver for Conexant 2388x based TV cards * card-specific stuff. @@ -90,6 +90,9 @@ struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, }}, }, [CX88_BOARD_PIXELVIEW] = { @@ -496,6 +499,9 @@ struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_DVB, .vmux = 0, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, }}, .dvb = 1, }, @@ -753,6 +759,27 @@ struct cx88_board cx88_boards[] = { }}, .dvb = 1, }, + [CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = { + .name = "DViCO FusionHDTV 5 Gold", + .tuner_type = TUNER_LG_TDVS_H062F, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* See DViCO FusionHDTV 3 Gold-Q for GPIO documentation. */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0f0d, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0f00, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0f00, + }}, + }, }; const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards); @@ -880,6 +907,10 @@ struct cx88_subid cx88_subids[] = { .subvendor = 0x153b, .subdevice = 0x1166, .card = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1, + },{ + .subvendor = 0x18ac, + .subdevice = 0xd500, + .card = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD, }, }; const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index ef0e9a85c359..78d223257a68 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -1,5 +1,5 @@ /* - * $Id: cx88-dvb.c,v 1.54 2005/07/25 05:13:50 mkrufky Exp $ + * $Id: cx88-dvb.c,v 1.58 2005/08/07 09:24:08 mkrufky Exp $ * * device driver for Conexant 2388x based TV cards * MPEG Transport Stream (DVB) routines @@ -208,14 +208,26 @@ static struct or51132_config pchdtv_hd3000 = { #ifdef HAVE_LGDT330X static int lgdt330x_pll_set(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params, - u8* pllbuf) + struct dvb_frontend_parameters* params) { struct cx8802_dev *dev= fe->dvb->priv; + u8 buf[4]; + struct i2c_msg msg = + { .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 }; + int err; - pllbuf[0] = dev->core->pll_addr; - dvb_pll_configure(dev->core->pll_desc, &pllbuf[1], - params->frequency, 0); + dvb_pll_configure(dev->core->pll_desc, buf, params->frequency, 0); + dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", + __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); + if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) { + printk(KERN_WARNING "cx88-dvb: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, buf[0], buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } return 0; } @@ -244,6 +256,8 @@ static int lgdt330x_set_ts_param(struct dvb_frontend* fe, int is_punctured) static struct lgdt330x_config fusionhdtv_3_gold = { .demod_address = 0x0e, + .demod_chip = LGDT3302, + .serial_mpeg = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */ .pll_set = lgdt330x_pll_set, .set_ts_params = lgdt330x_set_ts_param, }; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 5588a3aeecb4..5f58c103198a 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1,5 +1,5 @@ /* - * $Id: cx88-video.c,v 1.80 2005/07/13 08:49:08 mchehab Exp $ + * $Id: cx88-video.c,v 1.82 2005/07/22 05:13:34 mkrufky Exp $ * * device driver for Conexant 2388x based TV cards * video4linux video interface @@ -758,10 +758,10 @@ static int video_open(struct inode *inode, struct file *file) struct cx88_core *core = dev->core; int board = core->board; dprintk(1,"video_open: setting radio device\n"); + cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3); cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0); cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1); cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2); - cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3); dev->core->tvaudio = WW_FM; cx88_set_tvaudio(core); cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index b008f7db6dfd..da65dc92787c 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -1,5 +1,5 @@ /* - * $Id: cx88.h,v 1.69 2005/07/13 17:25:25 mchehab Exp $ + * $Id: cx88.h,v 1.70 2005/07/24 17:44:09 mkrufky Exp $ * * v4l2 device driver for cx2388x based TV cards * @@ -171,6 +171,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T 28 #define CX88_BOARD_ADSTECH_DVB_T_PCI 29 #define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1 30 +#define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c index 6239254db27e..62f1b8ddb98b 100644 --- a/drivers/media/video/msp3400.c +++ b/drivers/media/video/msp3400.c @@ -741,11 +741,9 @@ static int msp34xx_sleep(struct msp3400c *msp, int timeout) schedule_timeout(msecs_to_jiffies(timeout)); } } - if (current->flags & PF_FREEZE) { - refrigerator (); - } remove_wait_queue(&msp->wq, &wait); + try_to_freeze(); return msp->restart; } diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 93dd61978541..1203b93a572c 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -1,5 +1,5 @@ /* - * $Id: saa7134-i2c.c,v 1.19 2005/07/07 01:49:30 mkrufky Exp $ + * $Id: saa7134-i2c.c,v 1.22 2005/07/22 04:09:41 mkrufky Exp $ * * device driver for philips saa7134 based TV cards * i2c interface support @@ -300,6 +300,8 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, status = i2c_get_status(dev); if (i2c_is_error(status)) goto err; + /* ensure that the bus is idle for at least one bit slot */ + msleep(1); d1printk("\n"); return num; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 6836c07794fc..2af0cb2a731b 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -1,5 +1,5 @@ /* - * $Id: saa7134.h,v 1.48 2005/07/01 08:22:24 nsh Exp $ + * $Id: saa7134.h,v 1.49 2005/07/13 17:25:25 mchehab Exp $ * * v4l2 device driver for philips saa7134 based TV cards * @@ -21,7 +21,7 @@ */ #include <linux/version.h> -#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,13) +#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,14) #include <linux/pci.h> #include <linux/i2c.h> diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c index 4d27ac1b7fb8..cebcc1fa68d1 100644 --- a/drivers/media/video/tea5767.c +++ b/drivers/media/video/tea5767.c @@ -2,7 +2,7 @@ * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview * I2C address is allways 0xC0. * - * $Id: tea5767.c,v 1.21 2005/07/14 03:06:43 mchehab Exp $ + * $Id: tea5767.c,v 1.27 2005/07/31 12:10:56 mchehab Exp $ * * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br) * This code is placed under the terms of the GNU General Public License @@ -15,7 +15,6 @@ #include <linux/videodev.h> #include <linux/delay.h> #include <media/tuner.h> -#include <media/tuner.h> #define PREFIX "TEA5767 " @@ -293,16 +292,16 @@ static int tea5767_stereo(struct i2c_client *c) int tea5767_autodetection(struct i2c_client *c) { - unsigned char buffer[5] = { 0xff, 0xff, 0xff, 0xff, 0xff }; + unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; int rc; struct tuner *t = i2c_get_clientdata(c); - if (5 != (rc = i2c_master_recv(c, buffer, 5))) { + if (7 != (rc = i2c_master_recv(c, buffer, 7))) { tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc); return EINVAL; } - /* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */ + /* If all bytes are the same then it's a TV tuner and not a tea5767 */ if (buffer[0] == buffer[1] && buffer[0] == buffer[2] && buffer[0] == buffer[3] && buffer[0] == buffer[4]) { tuner_warn("All bytes are equal. It is not a TEA5767\n"); @@ -318,6 +317,17 @@ int tea5767_autodetection(struct i2c_client *c) tuner_warn("Chip ID is not zero. It is not a TEA5767\n"); return EINVAL; } + /* It seems that tea5767 returns 0xff after the 5th byte */ + if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) { + tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n"); + return EINVAL; + } + + /* It seems that tea5767 returns 0xff after the 5th byte */ + if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) { + tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n"); + return EINVAL; + } tuner_warn("TEA5767 detected.\n"); return 0; @@ -327,10 +337,8 @@ int tea5767_tuner_init(struct i2c_client *c) { struct tuner *t = i2c_get_clientdata(c); - if (tea5767_autodetection(c) == EINVAL) - return EINVAL; - - tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio"); + tuner_info("type set to %d (%s)\n", t->type, + "Philips TEA5767HN FM Radio"); strlcpy(c->name, "tea5767", sizeof(c->name)); t->tv_freq = set_tv_freq; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index b25a9c08ac02..f0a579827a24 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1,5 +1,5 @@ /* - * $Id: tuner-core.c,v 1.58 2005/07/14 03:06:43 mchehab Exp $ + * $Id: tuner-core.c,v 1.63 2005/07/28 18:19:55 mchehab Exp $ * * i2c tv tuner chip device driver * core core, i.e. kernel interfaces, registering and so on @@ -23,6 +23,8 @@ #include <media/tuner.h> #include <media/audiochip.h> +#include "msp3400.h" + #define UNSET (-1U) /* standard i2c insmod options */ @@ -42,6 +44,9 @@ module_param(addr, int, 0444); static unsigned int no_autodetect = 0; module_param(no_autodetect, int, 0444); +static unsigned int show_i2c = 0; +module_param(show_i2c, int, 0444); + /* insmod options used at runtime => read/write */ unsigned int tuner_debug = 0; module_param(tuner_debug, int, 0644); @@ -320,6 +325,17 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name); + if (show_i2c) { + unsigned char buffer[16]; + int i,rc; + + memset(buffer, 0, sizeof(buffer)); + rc = i2c_master_recv(&t->i2c, buffer, sizeof(buffer)); + printk("tuner-%04x I2C RECV = ",addr); + for (i=0;i<rc;i++) + printk("%02x ",buffer[i]); + printk("\n"); + } /* TEA5767 autodetection code - only for addr = 0xc0 */ if (!no_autodetect) { if (addr == 0x60) { @@ -451,6 +467,17 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } break; + case VIDIOCSAUDIO: + if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) + return 0; + if (check_v4l2(t) == EINVAL) + return 0; + + /* Should be implemented, since bttv calls it */ + tuner_dbg("VIDIOCSAUDIO not implemented.\n"); + + break; + case MSP_SET_MATRIX: case TDA9887_SET_CONFIG: break; /* --- v4l ioctls --- */ diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index a3f8e83f5314..de0c93aeb75d 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -1,5 +1,5 @@ /* - * $Id: tuner-simple.c,v 1.39 2005/07/07 01:49:30 mkrufky Exp $ + * $Id: tuner-simple.c,v 1.43 2005/07/28 18:41:21 mchehab Exp $ * * i2c tv tuner chip device driver * controls all those simple 4-control-bytes style tuners. @@ -245,6 +245,12 @@ static struct tunertype tuners[] = { /* see tea5767.c for details */}, { "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL, 16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 }, + + { "LG TDVS-H062F/TUA6034", LGINNOTEK, NTSC, + 16*160.00,16*455.00,0x01,0x02,0x04,0x8e,732}, + + { "Ymec TVF66T5-B/DFF", Philips, PAL, + 16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623}, }; unsigned const int tuner_count = ARRAY_SIZE(tuners); diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 62b03ef091e0..127ec38ebd60 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -189,7 +189,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "Philips FQ1236 MK3"}, { TUNER_ABSENT, "Samsung TCPN 2121P30A"}, { TUNER_ABSENT, "Samsung TCPE 4121P30A"}, - { TUNER_ABSENT, "TCL MFPE05 2"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"}, /* 90-99 */ { TUNER_ABSENT, "LG TALN H202T"}, { TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"}, |
