diff options
Diffstat (limited to 'drivers/media/video/ivtv/ivtv-i2c.c')
| -rw-r--r-- | drivers/media/video/ivtv/ivtv-i2c.c | 748 |
1 files changed, 748 insertions, 0 deletions
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c new file mode 100644 index 000000000000..50624c6a62a5 --- /dev/null +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -0,0 +1,748 @@ +/* + I2C functions + Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com> + Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + This file includes an i2c implementation that was reverse engineered + from the Hauppauge windows driver. Older ivtv versions used i2c-algo-bit, + which whilst fine under most circumstances, had trouble with the Zilog + CPU on the PVR-150 which handles IR functions (occasional inability to + communicate with the chip until it was reset) and also with the i2c + bus being completely unreachable when multiple PVR cards were present. + + The implementation is very similar to i2c-algo-bit, but there are enough + subtle differences that the two are hard to merge. The general strategy + employed by i2c-algo-bit is to use udelay() to implement the timing + when putting out bits on the scl/sda lines. The general strategy taken + here is to poll the lines for state changes (see ivtv_waitscl and + ivtv_waitsda). In addition there are small delays at various locations + which poll the SCL line 5 times (ivtv_scldelay). I would guess that + since this is memory mapped I/O that the length of those delays is tied + to the PCI bus clock. There is some extra code to do with recovery + and retries. Since it is not known what causes the actual i2c problems + in the first place, the only goal if one was to attempt to use + i2c-algo-bit would be to try to make it follow the same code path. + This would be a lot of work, and I'm also not convinced that it would + provide a generic benefit to i2c-algo-bit. Therefore consider this + an engineering solution -- not pretty, but it works. + + Some more general comments about what we are doing: + + The i2c bus is a 2 wire serial bus, with clock (SCL) and data (SDA) + lines. To communicate on the bus (as a master, we don't act as a slave), + we first initiate a start condition (ivtv_start). We then write the + address of the device that we want to communicate with, along with a flag + that indicates whether this is a read or a write. The slave then issues + an ACK signal (ivtv_ack), which tells us that it is ready for reading / + writing. We then proceed with reading or writing (ivtv_read/ivtv_write), + and finally issue a stop condition (ivtv_stop) to make the bus available + to other masters. + + There is an additional form of transaction where a write may be + immediately followed by a read. In this case, there is no intervening + stop condition. (Only the msp3400 chip uses this method of data transfer). + */ + +#include "ivtv-driver.h" +#include "ivtv-cards.h" +#include "ivtv-gpio.h" +#include "ivtv-i2c.h" + +#include <media/ir-kbd-i2c.h> + +/* i2c implementation for cx23415/6 chip, ivtv project. + * Author: Kevin Thayer (nufan_wfk at yahoo.com) + */ +/* i2c stuff */ +#define IVTV_REG_I2C_SETSCL_OFFSET 0x7000 +#define IVTV_REG_I2C_SETSDA_OFFSET 0x7004 +#define IVTV_REG_I2C_GETSCL_OFFSET 0x7008 +#define IVTV_REG_I2C_GETSDA_OFFSET 0x700c + +#ifndef I2C_ADAP_CLASS_TV_ANALOG +#define I2C_ADAP_CLASS_TV_ANALOG I2C_CLASS_TV_ANALOG +#endif /* I2C_ADAP_CLASS_TV_ANALOG */ + +#define IVTV_CS53L32A_I2C_ADDR 0x11 +#define IVTV_CX25840_I2C_ADDR 0x44 +#define IVTV_SAA7115_I2C_ADDR 0x21 +#define IVTV_SAA7127_I2C_ADDR 0x44 +#define IVTV_SAA717x_I2C_ADDR 0x21 +#define IVTV_MSP3400_I2C_ADDR 0x40 +#define IVTV_HAUPPAUGE_I2C_ADDR 0x50 +#define IVTV_WM8739_I2C_ADDR 0x1a +#define IVTV_WM8775_I2C_ADDR 0x1b +#define IVTV_TEA5767_I2C_ADDR 0x60 +#define IVTV_UPD64031A_I2C_ADDR 0x12 +#define IVTV_UPD64083_I2C_ADDR 0x5c +#define IVTV_TDA985X_I2C_ADDR 0x5b + +/* This array should match the IVTV_HW_ defines */ +static const u8 hw_driverids[] = { + I2C_DRIVERID_CX25840, + I2C_DRIVERID_SAA711X, + I2C_DRIVERID_SAA7127, + I2C_DRIVERID_MSP3400, + I2C_DRIVERID_TUNER, + I2C_DRIVERID_WM8775, + I2C_DRIVERID_CS53L32A, + I2C_DRIVERID_TVEEPROM, + I2C_DRIVERID_SAA711X, + I2C_DRIVERID_TVAUDIO, + I2C_DRIVERID_UPD64031A, + I2C_DRIVERID_UPD64083, + I2C_DRIVERID_SAA717X, + I2C_DRIVERID_WM8739, + 0 /* IVTV_HW_GPIO dummy driver ID */ +}; + +/* This array should match the IVTV_HW_ defines */ +static const char * const hw_drivernames[] = { + "cx2584x", + "saa7115", + "saa7127", + "msp3400", + "tuner", + "wm8775", + "cs53l32a", + "tveeprom", + "saa7114", + "tvaudio", + "upd64031a", + "upd64083", + "saa717x", + "wm8739", + "gpio", +}; + +static int attach_inform(struct i2c_client *client) +{ + struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter); + int i; + + IVTV_DEBUG_I2C("i2c client attach\n"); + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + if (itv->i2c_clients[i] == NULL) { + itv->i2c_clients[i] = client; + break; + } + } + if (i == I2C_CLIENTS_MAX) { + IVTV_ERR("insufficient room for new I2C client!\n"); + } + return 0; +} + +static int detach_inform(struct i2c_client *client) +{ + int i; + struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter); + + IVTV_DEBUG_I2C("i2c client detach\n"); + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + if (itv->i2c_clients[i] == client) { + itv->i2c_clients[i] = NULL; + break; + } + } + IVTV_DEBUG_I2C("i2c detach [client=%s,%s]\n", + client->name, (i < I2C_CLIENTS_MAX) ? "ok" : "failed"); + + return 0; +} + +/* Set the serial clock line to the desired state */ +static void ivtv_setscl(struct ivtv *itv, int state) +{ + /* write them out */ + /* write bits are inverted */ + write_reg(~state, IVTV_REG_I2C_SETSCL_OFFSET); +} + +/* Set the serial data line to the desired state */ +static void ivtv_setsda(struct ivtv *itv, int state) +{ + /* write them out */ + /* write bits are inverted */ + write_reg(~state & 1, IVTV_REG_I2C_SETSDA_OFFSET); +} + +/* Read the serial clock line */ +static int ivtv_getscl(struct ivtv *itv) +{ + return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1; +} + +/* Read the serial data line */ +static int ivtv_getsda(struct ivtv *itv) +{ + return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1; +} + +/* Implement a short delay by polling the serial clock line */ +static void ivtv_scldelay(struct ivtv *itv) +{ + int i; + + for (i = 0; i < 5; ++i) + ivtv_getscl(itv); +} + +/* Wait for the serial clock line to become set to a specific value */ +static int ivtv_waitscl(struct ivtv *itv, int val) +{ + int i; + + ivtv_scldelay(itv); + for (i = 0; i < 1000; ++i) { + if (ivtv_getscl(itv) == val) + return 1; + } + return 0; +} + +/* Wait for the serial data line to become set to a specific value */ +static int ivtv_waitsda(struct ivtv *itv, int val) +{ + int i; + + ivtv_scldelay(itv); + for (i = 0; i < 1000; ++i) { + if (ivtv_getsda(itv) == val) + return 1; + } + return 0; +} + +/* Wait for the slave to issue an ACK */ +static int ivtv_ack(struct ivtv *itv) +{ + int ret = 0; + + if (ivtv_getscl(itv) == 1) { + IVTV_DEBUG_I2C("SCL was high starting an ack\n"); + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Could not set SCL low starting an ack\n"); + return -EREMOTEIO; + } + } + ivtv_setsda(itv, 1); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + if (!ivtv_waitsda(itv, 0)) { + IVTV_DEBUG_I2C("Slave did not ack\n"); + ret = -EREMOTEIO; + } + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Failed to set SCL low after ACK\n"); + ret = -EREMOTEIO; + } + return ret; +} + +/* Write a single byte to the i2c bus and wait for the slave to ACK */ +static int ivtv_sendbyte(struct ivtv *itv, unsigned char byte) +{ + int i, bit; + + IVTV_DEBUG_I2C("write %x\n",byte); + for (i = 0; i < 8; ++i, byte<<=1) { + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Error setting SCL low\n"); + return -EREMOTEIO; + } + bit = (byte>>7)&1; + ivtv_setsda(itv, bit); + if (!ivtv_waitsda(itv, bit)) { + IVTV_DEBUG_I2C("Error setting SDA\n"); + return -EREMOTEIO; + } + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("Slave not ready for bit\n"); + return -EREMOTEIO; + } + } + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("Error setting SCL low\n"); + return -EREMOTEIO; + } + return ivtv_ack(itv); +} + +/* Read a byte from the i2c bus and send a NACK if applicable (i.e. for the + final byte) */ +static int ivtv_readbyte(struct ivtv *itv, unsigned char *byte, int nack) +{ + int i; + + *byte = 0; + + ivtv_setsda(itv, 1); + ivtv_scldelay(itv); + for (i = 0; i < 8; ++i) { + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("Error setting SCL high\n"); + return -EREMOTEIO; + } + *byte = ((*byte)<<1)|ivtv_getsda(itv); + } + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + ivtv_setsda(itv, nack); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + ivtv_scldelay(itv); + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + IVTV_DEBUG_I2C("read %x\n",*byte); + return 0; +} + +/* Issue a start condition on the i2c bus to alert slaves to prepare for + an address write */ +static int ivtv_start(struct ivtv *itv) +{ + int sda; + + sda = ivtv_getsda(itv); + if (sda != 1) { + IVTV_DEBUG_I2C("SDA was low at start\n"); + ivtv_setsda(itv, 1); + if (!ivtv_waitsda(itv, 1)) { + IVTV_DEBUG_I2C("SDA stuck low\n"); + return -EREMOTEIO; + } + } + if (ivtv_getscl(itv) != 1) { + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("SCL stuck low at start\n"); + return -EREMOTEIO; + } + } + ivtv_setsda(itv, 0); + ivtv_scldelay(itv); + return 0; +} + +/* Issue a stop condition on the i2c bus to release it */ +static int ivtv_stop(struct ivtv *itv) +{ + int i; + + if (ivtv_getscl(itv) != 0) { + IVTV_DEBUG_I2C("SCL not low when stopping\n"); + ivtv_setscl(itv, 0); + if (!ivtv_waitscl(itv, 0)) { + IVTV_DEBUG_I2C("SCL could not be set low\n"); + } + } + ivtv_setsda(itv, 0); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + if (!ivtv_waitscl(itv, 1)) { + IVTV_DEBUG_I2C("SCL could not be set high\n"); + return -EREMOTEIO; + } + ivtv_scldelay(itv); + ivtv_setsda(itv, 1); + if (!ivtv_waitsda(itv, 1)) { + IVTV_DEBUG_I2C("resetting I2C\n"); + for (i = 0; i < 16; ++i) { + ivtv_setscl(itv, 0); + ivtv_scldelay(itv); + ivtv_setscl(itv, 1); + ivtv_scldelay(itv); + ivtv_setsda(itv, 1); + } + ivtv_waitsda(itv, 1); + return -EREMOTEIO; + } + return 0; +} + +/* Write a message to the given i2c slave. do_stop may be 0 to prevent + issuing the i2c stop condition (when following with a read) */ +static int ivtv_write(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len, int do_stop) +{ + int retry, ret = -EREMOTEIO; + u32 i; + + for (retry = 0; ret != 0 && retry < 8; ++retry) { + ret = ivtv_start(itv); + + if (ret == 0) { + ret = ivtv_sendbyte(itv, addr<<1); + for (i = 0; ret == 0 && i < len; ++i) + ret = ivtv_sendbyte(itv, data[i]); + } + if (ret != 0 || do_stop) { + ivtv_stop(itv); + } + } + if (ret) + IVTV_DEBUG_I2C("i2c write to %x failed\n", addr); + return ret; +} + +/* Read data from the given i2c slave. A stop condition is always issued. */ +static int ivtv_read(struct ivtv *itv, unsigned char addr, unsigned char *data, u32 len) +{ + int retry, ret = -EREMOTEIO; + u32 i; + + for (retry = 0; ret != 0 && retry < 8; ++retry) { + ret = ivtv_start(itv); + if (ret == 0) + ret = ivtv_sendbyte(itv, (addr << 1) | 1); + for (i = 0; ret == 0 && i < len; ++i) { + ret = ivtv_readbyte(itv, &data[i], i == len - 1); + } + ivtv_stop(itv); + } + if (ret) + IVTV_DEBUG_I2C("i2c read from %x failed\n", addr); + return ret; +} + +/* Kernel i2c transfer implementation. Takes a number of messages to be read + or written. If a read follows a write, this will occur without an + intervening stop condition */ +static int ivtv_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct ivtv *itv = i2c_get_adapdata(i2c_adap); + int retval; + int i; + + mutex_lock(&itv->i2c_bus_lock); + for (i = retval = 0; retval == 0 && i < num; i++) { + if (msgs[i].flags & I2C_M_RD) + retval = ivtv_read(itv, msgs[i].addr, msgs[i].buf, msgs[i].len); + else { + /* if followed by a read, don't stop */ + int stop = !(i + 1 < num && msgs[i + 1].flags == I2C_M_RD); + + retval = ivtv_write(itv, msgs[i].addr, msgs[i].buf, msgs[i].len, stop); + } + } + mutex_unlock(&itv->i2c_bus_lock); + return retval ? retval : num; +} + +/* Kernel i2c capabilities */ +static u32 ivtv_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm ivtv_algo = { + .master_xfer = ivtv_xfer, + .functionality = ivtv_functionality, +}; + +/* template for our-bit banger */ +static struct i2c_adapter ivtv_i2c_adap_hw_template = { + .name = "ivtv i2c driver", + .id = I2C_HW_B_CX2341X, + .algo = &ivtv_algo, + .algo_data = NULL, /* filled from template */ + .client_register = attach_inform, + .client_unregister = detach_inform, + .owner = THIS_MODULE, +#ifdef I2C_ADAP_CLASS_TV_ANALOG + .class = I2C_ADAP_CLASS_TV_ANALOG, +#endif +}; + +static void ivtv_setscl_old(void *data, int state) +{ + struct ivtv *itv = (struct ivtv *)data; + + if (state) + itv->i2c_state |= 0x01; + else + itv->i2c_state &= ~0x01; + + /* write them out */ + /* write bits are inverted */ + write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSCL_OFFSET); +} + +static void ivtv_setsda_old(void *data, int state) +{ + struct ivtv *itv = (struct ivtv *)data; + + if (state) + itv->i2c_state |= 0x01; + else + itv->i2c_state &= ~0x01; + + /* write them out */ + /* write bits are inverted */ + write_reg(~itv->i2c_state, IVTV_REG_I2C_SETSDA_OFFSET); +} + +static int ivtv_getscl_old(void *data) +{ + struct ivtv *itv = (struct ivtv *)data; + + return read_reg(IVTV_REG_I2C_GETSCL_OFFSET) & 1; +} + +static int ivtv_getsda_old(void *data) +{ + struct ivtv *itv = (struct ivtv *)data; + + return read_reg(IVTV_REG_I2C_GETSDA_OFFSET) & 1; +} + +/* template for i2c-bit-algo */ +static struct i2c_adapter ivtv_i2c_adap_template = { + .name = "ivtv i2c driver", + .id = I2C_HW_B_CX2341X, /* algo-bit is OR'd with this */ + .algo = NULL, /* set by i2c-algo-bit */ + .algo_data = NULL, /* filled from template */ + .client_register = attach_inform, + .client_unregister = detach_inform, + .owner = THIS_MODULE, +#ifdef I2C_ADAP_CLASS_TV_ANALOG + .class = I2C_ADAP_CLASS_TV_ANALOG, +#endif +}; + +static struct i2c_algo_bit_data ivtv_i2c_algo_template = { + NULL, /* ?? */ + ivtv_setsda_old, /* setsda function */ + ivtv_setscl_old, /* " */ + ivtv_getsda_old, /* " */ + ivtv_getscl_old, /* " */ + 10, /* udelay */ + 200 /* timeout */ +}; + +static struct i2c_client ivtv_i2c_client_template = { + .name = "ivtv internal", +}; + +int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg) +{ + struct i2c_client *client; + int retval; + int i; + + IVTV_DEBUG_I2C("call_i2c_client addr=%02x\n", addr); + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + client = itv->i2c_clients[i]; + if (client == NULL) { + continue; + } + if (client->driver->command == NULL) { + continue; + } + if (addr == client->addr) { + retval = client->driver->command(client, cmd, arg); + return retval; + } + } + if (cmd != VIDIOC_G_CHIP_IDENT) + IVTV_ERR("i2c addr 0x%02x not found for command 0x%x!\n", addr, cmd); + return -ENODEV; +} + +/* Find the i2c device based on the driver ID and return + its i2c address or -ENODEV if no matching device was found. */ +static int ivtv_i2c_id_addr(struct ivtv *itv, u32 id) +{ + struct i2c_client *client; + int retval = -ENODEV; + int i; + + for (i = 0; i < I2C_CLIENTS_MAX; i++) { + client = itv->i2c_clients[i]; + if (client == NULL) + continue; + if (id == client->driver->id) { + retval = client->addr; + break; + } + } + return retval; +} + +/* Find the i2c device name matching the DRIVERID */ +static const char *ivtv_i2c_id_name(u32 id) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) + if (hw_driverids[i] == id) + return hw_drivernames[i]; + return "unknown device"; +} + +/* Find the i2c device name matching the IVTV_HW_ flag */ +static const char *ivtv_i2c_hw_name(u32 hw) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) + if (1 << i == hw) + return hw_drivernames[i]; + return "unknown device"; +} + +/* Find the i2c device matching the IVTV_HW_ flag and return + its i2c address or -ENODEV if no matching device was found. */ +int ivtv_i2c_hw_addr(struct ivtv *itv, u32 hw) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) + if (1 << i == hw) + return ivtv_i2c_id_addr(itv, hw_driverids[i]); + return -ENODEV; +} + +/* Calls i2c device based on IVTV_HW_ flag. If hw == 0, then do nothing. + If hw == IVTV_HW_GPIO then call the gpio handler. */ +int ivtv_i2c_hw(struct ivtv *itv, u32 hw, unsigned int cmd, void *arg) +{ + int addr; + + if (hw == IVTV_HW_GPIO) + return ivtv_gpio(itv, cmd, arg); + if (hw == 0) + return 0; + + addr = ivtv_i2c_hw_addr(itv, hw); + if (addr < 0) { + IVTV_ERR("i2c hardware 0x%08x (%s) not found for command 0x%x!\n", + hw, ivtv_i2c_hw_name(hw), cmd); + return addr; + } + return ivtv_call_i2c_client(itv, addr, cmd, arg); +} + +/* Calls i2c device based on I2C driver ID. */ +int ivtv_i2c_id(struct ivtv *itv, u32 id, unsigned int cmd, void *arg) +{ + int addr; + + addr = ivtv_i2c_id_addr(itv, id); + if (addr < 0) { + if (cmd != VIDIOC_G_CHIP_IDENT) + IVTV_ERR("i2c ID 0x%08x (%s) not found for command 0x%x!\n", + id, ivtv_i2c_id_name(id), cmd); + return addr; + } + return ivtv_call_i2c_client(itv, addr, cmd, arg); +} + +int ivtv_cx25840(struct ivtv *itv, unsigned int cmd, void *arg) +{ + return ivtv_call_i2c_client(itv, IVTV_CX25840_I2C_ADDR, cmd, arg); +} + +int ivtv_saa7115(struct ivtv *itv, unsigned int cmd, void *arg) +{ + return ivtv_call_i2c_client(itv, IVTV_SAA7115_I2C_ADDR, cmd, arg); +} + +int ivtv_saa7127(struct ivtv *itv, unsigned int cmd, void *arg) +{ + return ivtv_call_i2c_client(itv, IVTV_SAA7127_I2C_ADDR, cmd, arg); +} + +int ivtv_saa717x(struct ivtv *itv, unsigned int cmd, void *arg) +{ + return ivtv_call_i2c_client(itv, IVTV_SAA717x_I2C_ADDR, cmd, arg); +} + +int ivtv_upd64031a(struct ivtv *itv, unsigned int cmd, void *arg) +{ + return ivtv_call_i2c_client(itv, IVTV_UPD64031A_I2C_ADDR, cmd, arg); +} + +int ivtv_upd64083(struct ivtv *itv, unsigned int cmd, void *arg) +{ + return ivtv_call_i2c_client(itv, IVTV_UPD64083_I2C_ADDR, cmd, arg); +} + +/* broadcast cmd for all I2C clients and for the gpio subsystem */ +void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg) +{ + if (itv->i2c_adap.algo == NULL) { + IVTV_ERR("adapter is not set"); + return; + } + i2c_clients_command(&itv->i2c_adap, cmd, arg); + if (itv->hw_flags & IVTV_HW_GPIO) + ivtv_gpio(itv, cmd, arg); +} + +/* init + register i2c algo-bit adapter */ +int __devinit init_ivtv_i2c(struct ivtv *itv) +{ + IVTV_DEBUG_I2C("i2c init\n"); + + if (itv->options.newi2c > 0) { + memcpy(&itv->i2c_adap, &ivtv_i2c_adap_hw_template, + sizeof(struct i2c_adapter)); + } else { + memcpy(&itv->i2c_adap, &ivtv_i2c_adap_template, + sizeof(struct i2c_adapter)); + memcpy(&itv->i2c_algo, &ivtv_i2c_algo_template, + sizeof(struct i2c_algo_bit_data)); + itv->i2c_algo.data = itv; + itv->i2c_adap.algo_data = &itv->i2c_algo; + } + + sprintf(itv->i2c_adap.name + strlen(itv->i2c_adap.name), " #%d", + itv->num); + i2c_set_adapdata(&itv->i2c_adap, itv); + + memcpy(&itv->i2c_client, &ivtv_i2c_client_template, + sizeof(struct i2c_client)); + itv->i2c_client.adapter = &itv->i2c_adap; + itv->i2c_adap.dev.parent = &itv->dev->dev; + + IVTV_DEBUG_I2C("setting scl and sda to 1\n"); + ivtv_setscl(itv, 1); + ivtv_setsda(itv, 1); + + if (itv->options.newi2c > 0) + return i2c_add_adapter(&itv->i2c_adap); + else + return i2c_bit_add_bus(&itv->i2c_adap); +} + +void __devexit exit_ivtv_i2c(struct ivtv *itv) +{ + IVTV_DEBUG_I2C("i2c exit\n"); + + i2c_del_adapter(&itv->i2c_adap); +} |
