7 files changed, 9 insertions, 5 deletions
diff --git a/drivers/media/usb/gspca/gl860/gl860.c b/drivers/media/usb/gspca/gl860/gl860.c
index cb1e64ca59c9..cea8d7f51c3c 100644
--- a/drivers/media/usb/gspca/gl860/gl860.c
+++ b/drivers/media/usb/gspca/gl860/gl860.c
@@ -438,7 +438,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	s32 nToSkip =
 		sd->swapRB * (gspca_dev->cam.cam_mode[mode].bytesperline + 1);
 
-	/* Test only against 0202h, so endianess does not matter */
+	/* Test only against 0202h, so endianness does not matter */
 	switch (*(s16 *) data) {
 	case 0x0202:		/* End of frame, start a new one */
 		gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
diff --git a/drivers/media/usb/gspca/pac207.c b/drivers/media/usb/gspca/pac207.c
index cd79c180f67b..07529e5a0c56 100644
--- a/drivers/media/usb/gspca/pac207.c
+++ b/drivers/media/usb/gspca/pac207.c
@@ -416,7 +416,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 #if IS_ENABLED(CONFIG_INPUT)
 static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,		/* interrupt packet data */
-			int len)		/* interrput packet length */
+			int len)		/* interrupt packet length */
 {
 	int ret = -EINVAL;
 
diff --git a/drivers/media/usb/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c
index a91509643563..2fd1c5e31a0f 100644
--- a/drivers/media/usb/gspca/pac7302.c
+++ b/drivers/media/usb/gspca/pac7302.c
@@ -874,7 +874,7 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
 #if IS_ENABLED(CONFIG_INPUT)
 static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,		/* interrupt packet data */
-			int len)		/* interrput packet length */
+			int len)		/* interrupt packet length */
 {
 	int ret = -EINVAL;
 	u8 data0, data1;
diff --git a/drivers/media/usb/gspca/stk1135.c b/drivers/media/usb/gspca/stk1135.c
index 1fc80af2a189..48234c9a8b6c 100644
--- a/drivers/media/usb/gspca/stk1135.c
+++ b/drivers/media/usb/gspca/stk1135.c
@@ -361,6 +361,9 @@ static void stk1135_configure_clock(struct gspca_dev *gspca_dev)
 
 	/* set serial interface clock divider (30MHz/0x1f*16+2) = 60240 kHz) */
 	reg_w(gspca_dev, STK1135_REG_SICTL + 2, 0x1f);
+
+	/* wait a while for sensor to catch up */
+	udelay(1000);
 }
 
 static void stk1135_camera_disable(struct gspca_dev *gspca_dev)
diff --git a/drivers/media/usb/gspca/stv0680.c b/drivers/media/usb/gspca/stv0680.c
index 9c0827631b9c..7f94ec74282e 100644
--- a/drivers/media/usb/gspca/stv0680.c
+++ b/drivers/media/usb/gspca/stv0680.c
@@ -139,7 +139,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam = &gspca_dev->cam;
 
-	/* Give the camera some time to settle, otherwise initalization will
+	/* Give the camera some time to settle, otherwise initialization will
 	   fail on hotplug, and yes it really needs a full second. */
 	msleep(1000);
 
diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c
index a517d185febe..46c9f2229a18 100644
--- a/drivers/media/usb/gspca/sunplus.c
+++ b/drivers/media/usb/gspca/sunplus.c
@@ -1027,6 +1027,7 @@ static const struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x055f, 0xc650), BS(SPCA533, 0)},
 	{USB_DEVICE(0x05da, 0x1018), BS(SPCA504B, 0)},
 	{USB_DEVICE(0x06d6, 0x0031), BS(SPCA533, 0)},
+	{USB_DEVICE(0x06d6, 0x0041), BS(SPCA504B, 0)},
 	{USB_DEVICE(0x0733, 0x1311), BS(SPCA533, 0)},
 	{USB_DEVICE(0x0733, 0x1314), BS(SPCA533, 0)},
 	{USB_DEVICE(0x0733, 0x2211), BS(SPCA533, 0)},
diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c
index 7b95d8e88a20..d3e1b6d8bf49 100644
--- a/drivers/media/usb/gspca/zc3xx.c
+++ b/drivers/media/usb/gspca/zc3xx.c
@@ -6905,7 +6905,7 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev,
 #if IS_ENABLED(CONFIG_INPUT)
 static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
 			u8 *data,		/* interrupt packet data */
-			int len)		/* interrput packet length */
+			int len)		/* interrupt packet length */
 {
 	if (len == 8 && data[4] == 1) {
 		input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);