diff options
Diffstat (limited to 'drivers/media/usb/gspca/m5602/m5602_s5k83a.h')
| -rw-r--r-- | drivers/media/usb/gspca/m5602/m5602_s5k83a.h | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/drivers/media/usb/gspca/m5602/m5602_s5k83a.h b/drivers/media/usb/gspca/m5602/m5602_s5k83a.h new file mode 100644 index 000000000000..79952247b534 --- /dev/null +++ b/drivers/media/usb/gspca/m5602/m5602_s5k83a.h @@ -0,0 +1,193 @@ +/* + * Driver for the s5k83a sensor + * + * Copyright (C) 2008 Erik Andrén + * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. + * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> + * + * Portions of code to USB interface and ALi driver software, + * Copyright (c) 2006 Willem Duinker + * v4l2 interface modeled after the V4L2 driver + * for SN9C10x PC Camera Controllers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + */ + +#ifndef M5602_S5K83A_H_ +#define M5602_S5K83A_H_ + +#include "m5602_sensor.h" + +#define S5K83A_FLIP 0x01 +#define S5K83A_HFLIP_TUNE 0x03 +#define S5K83A_VFLIP_TUNE 0x05 +#define S5K83A_BRIGHTNESS 0x0a +#define S5K83A_EXPOSURE 0x18 +#define S5K83A_GAIN 0x1b +#define S5K83A_PAGE_MAP 0xec + +#define S5K83A_DEFAULT_GAIN 0x71 +#define S5K83A_DEFAULT_BRIGHTNESS 0x7e +#define S5K83A_DEFAULT_EXPOSURE 0x00 +#define S5K83A_MAXIMUM_EXPOSURE 0x3c +#define S5K83A_FLIP_MASK 0x10 +#define S5K83A_GPIO_LED_MASK 0x10 +#define S5K83A_GPIO_ROTATION_MASK 0x40 + +/*****************************************************************************/ + +/* Kernel module parameters */ +extern int force_sensor; +extern bool dump_sensor; + +int s5k83a_probe(struct sd *sd); +int s5k83a_init(struct sd *sd); +int s5k83a_start(struct sd *sd); +int s5k83a_stop(struct sd *sd); +void s5k83a_disconnect(struct sd *sd); + +static const struct m5602_sensor s5k83a = { + .name = "S5K83A", + .probe = s5k83a_probe, + .init = s5k83a_init, + .start = s5k83a_start, + .stop = s5k83a_stop, + .disconnect = s5k83a_disconnect, + .i2c_slave_id = 0x5a, + .i2c_regW = 2, +}; + +struct s5k83a_priv { + /* We use another thread periodically + probing the orientation of the camera */ + struct task_struct *rotation_thread; + s32 *settings; +}; + +static const unsigned char preinit_s5k83a[][4] = { + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d, 0x00}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00, 0x00}, + + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x1c, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, +}; + +/* This could probably be considerably shortened. + I don't have the hardware to experiment with it, patches welcome +*/ +static const unsigned char init_s5k83a[][4] = { + /* The following sequence is useless after a clean boot + but is necessary after resume from suspend */ + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x3f, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_L, 0xff, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0x80, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02, 0x00}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xf0, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x1d, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x08, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x20, 0x00}, + + {SENSOR, S5K83A_PAGE_MAP, 0x04, 0x00}, + {SENSOR, 0xaf, 0x01, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x00, 0x00}, + {SENSOR, 0x7b, 0xff, 0x00}, + {SENSOR, S5K83A_PAGE_MAP, 0x05, 0x00}, + {SENSOR, 0x01, 0x50, 0x00}, + {SENSOR, 0x12, 0x20, 0x00}, + {SENSOR, 0x17, 0x40, 0x00}, + {SENSOR, 0x1c, 0x00, 0x00}, + {SENSOR, 0x02, 0x70, 0x00}, + {SENSOR, 0x03, 0x0b, 0x00}, + {SENSOR, 0x04, 0xf0, 0x00}, + {SENSOR, 0x05, 0x0b, 0x00}, + {SENSOR, 0x06, 0x71, 0x00}, + {SENSOR, 0x07, 0xe8, 0x00}, /* 488 */ + {SENSOR, 0x08, 0x02, 0x00}, + {SENSOR, 0x09, 0x88, 0x00}, /* 648 */ + {SENSOR, 0x14, 0x00, 0x00}, + {SENSOR, 0x15, 0x20, 0x00}, /* 32 */ + {SENSOR, 0x19, 0x00, 0x00}, + {SENSOR, 0x1a, 0x98, 0x00}, /* 152 */ + {SENSOR, 0x0f, 0x02, 0x00}, + {SENSOR, 0x10, 0xe5, 0x00}, /* 741 */ + /* normal colors + (this is value after boot, but after tries can be different) */ + {SENSOR, 0x00, 0x06, 0x00}, +}; + +static const unsigned char start_s5k83a[][4] = { + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x09, 0x00}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x01, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0xe4, 0x00}, /* 484 */ + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_VSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, + {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00}, /* 639 */ + {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0, 0x00}, +}; +#endif |
