diff options
Diffstat (limited to 'drivers/media/tuners/tuner-xc2028.c')
| -rw-r--r-- | drivers/media/tuners/tuner-xc2028.c | 1509 |
1 files changed, 1509 insertions, 0 deletions
diff --git a/drivers/media/tuners/tuner-xc2028.c b/drivers/media/tuners/tuner-xc2028.c new file mode 100644 index 000000000000..7bcb6b0ff1df --- /dev/null +++ b/drivers/media/tuners/tuner-xc2028.c @@ -0,0 +1,1509 @@ +/* tuner-xc2028 + * + * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org) + * + * Copyright (c) 2007 Michel Ludwig (michel.ludwig@gmail.com) + * - frontend interface + * + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <asm/div64.h> +#include <linux/firmware.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/tuner.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <asm/unaligned.h> +#include "tuner-i2c.h" +#include "tuner-xc2028.h" +#include "tuner-xc2028-types.h" + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + +/* Registers (Write-only) */ +#define XREG_INIT 0x00 +#define XREG_RF_FREQ 0x02 +#define XREG_POWER_DOWN 0x08 + +/* Registers (Read-only) */ +#define XREG_FREQ_ERROR 0x01 +#define XREG_LOCK 0x02 +#define XREG_VERSION 0x04 +#define XREG_PRODUCT_ID 0x08 +#define XREG_HSYNC_FREQ 0x10 +#define XREG_FRAME_LINES 0x20 +#define XREG_SNR 0x40 + +#define XREG_ADC_ENV 0x0100 + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable verbose debug messages"); + +static int no_poweroff; +module_param(no_poweroff, int, 0644); +MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n" + "1 keep device energized and with tuner ready all the times.\n" + " Faster, but consumes more power and keeps the device hotter\n"); + +static char audio_std[8]; +module_param_string(audio_std, audio_std, sizeof(audio_std), 0); +MODULE_PARM_DESC(audio_std, + "Audio standard. XC3028 audio decoder explicitly " + "needs to know what audio\n" + "standard is needed for some video standards with audio A2 or NICAM.\n" + "The valid values are:\n" + "A2\n" + "A2/A\n" + "A2/B\n" + "NICAM\n" + "NICAM/A\n" + "NICAM/B\n"); + +static char firmware_name[30]; +module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); +MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " + "default firmware name\n"); + +static LIST_HEAD(hybrid_tuner_instance_list); +static DEFINE_MUTEX(xc2028_list_mutex); + +/* struct for storing firmware table */ +struct firmware_description { + unsigned int type; + v4l2_std_id id; + __u16 int_freq; + unsigned char *ptr; + unsigned int size; +}; + +struct firmware_properties { + unsigned int type; + v4l2_std_id id; + v4l2_std_id std_req; + __u16 int_freq; + unsigned int scode_table; + int scode_nr; +}; + +enum xc2028_state { + XC2028_NO_FIRMWARE = 0, + XC2028_WAITING_FIRMWARE, + XC2028_ACTIVE, + XC2028_SLEEP, + XC2028_NODEV, +}; + +struct xc2028_data { + struct list_head hybrid_tuner_instance_list; + struct tuner_i2c_props i2c_props; + __u32 frequency; + + enum xc2028_state state; + const char *fname; + + struct firmware_description *firm; + int firm_size; + __u16 firm_version; + + __u16 hwmodel; + __u16 hwvers; + + struct xc2028_ctrl ctrl; + + struct firmware_properties cur_fw; + + struct mutex lock; +}; + +#define i2c_send(priv, buf, size) ({ \ + int _rc; \ + _rc = tuner_i2c_xfer_send(&priv->i2c_props, buf, size); \ + if (size != _rc) \ + tuner_info("i2c output error: rc = %d (should be %d)\n",\ + _rc, (int)size); \ + if (priv->ctrl.msleep) \ + msleep(priv->ctrl.msleep); \ + _rc; \ +}) + +#define i2c_rcv(priv, buf, size) ({ \ + int _rc; \ + _rc = tuner_i2c_xfer_recv(&priv->i2c_props, buf, size); \ + if (size != _rc) \ + tuner_err("i2c input error: rc = %d (should be %d)\n", \ + _rc, (int)size); \ + _rc; \ +}) + +#define i2c_send_recv(priv, obuf, osize, ibuf, isize) ({ \ + int _rc; \ + _rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, obuf, osize, \ + ibuf, isize); \ + if (isize != _rc) \ + tuner_err("i2c input error: rc = %d (should be %d)\n", \ + _rc, (int)isize); \ + if (priv->ctrl.msleep) \ + msleep(priv->ctrl.msleep); \ + _rc; \ +}) + +#define send_seq(priv, data...) ({ \ + static u8 _val[] = data; \ + int _rc; \ + if (sizeof(_val) != \ + (_rc = tuner_i2c_xfer_send(&priv->i2c_props, \ + _val, sizeof(_val)))) { \ + tuner_err("Error on line %d: %d\n", __LINE__, _rc); \ + } else if (priv->ctrl.msleep) \ + msleep(priv->ctrl.msleep); \ + _rc; \ +}) + +static int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val) +{ + unsigned char buf[2]; + unsigned char ibuf[2]; + + tuner_dbg("%s %04x called\n", __func__, reg); + + buf[0] = reg >> 8; + buf[1] = (unsigned char) reg; + + if (i2c_send_recv(priv, buf, 2, ibuf, 2) != 2) + return -EIO; + + *val = (ibuf[1]) | (ibuf[0] << 8); + return 0; +} + +#define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0) +static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq) +{ + if (type & BASE) + printk("BASE "); + if (type & INIT1) + printk("INIT1 "); + if (type & F8MHZ) + printk("F8MHZ "); + if (type & MTS) + printk("MTS "); + if (type & D2620) + printk("D2620 "); + if (type & D2633) + printk("D2633 "); + if (type & DTV6) + printk("DTV6 "); + if (type & QAM) + printk("QAM "); + if (type & DTV7) + printk("DTV7 "); + if (type & DTV78) + printk("DTV78 "); + if (type & DTV8) + printk("DTV8 "); + if (type & FM) + printk("FM "); + if (type & INPUT1) + printk("INPUT1 "); + if (type & LCD) + printk("LCD "); + if (type & NOGD) + printk("NOGD "); + if (type & MONO) + printk("MONO "); + if (type & ATSC) + printk("ATSC "); + if (type & IF) + printk("IF "); + if (type & LG60) + printk("LG60 "); + if (type & ATI638) + printk("ATI638 "); + if (type & OREN538) + printk("OREN538 "); + if (type & OREN36) + printk("OREN36 "); + if (type & TOYOTA388) + printk("TOYOTA388 "); + if (type & TOYOTA794) + printk("TOYOTA794 "); + if (type & DIBCOM52) + printk("DIBCOM52 "); + if (type & ZARLINK456) + printk("ZARLINK456 "); + if (type & CHINA) + printk("CHINA "); + if (type & F6MHZ) + printk("F6MHZ "); + if (type & INPUT2) + printk("INPUT2 "); + if (type & SCODE) + printk("SCODE "); + if (type & HAS_IF) + printk("HAS_IF_%d ", int_freq); +} + +static v4l2_std_id parse_audio_std_option(void) +{ + if (strcasecmp(audio_std, "A2") == 0) + return V4L2_STD_A2; + if (strcasecmp(audio_std, "A2/A") == 0) + return V4L2_STD_A2_A; + if (strcasecmp(audio_std, "A2/B") == 0) + return V4L2_STD_A2_B; + if (strcasecmp(audio_std, "NICAM") == 0) + return V4L2_STD_NICAM; + if (strcasecmp(audio_std, "NICAM/A") == 0) + return V4L2_STD_NICAM_A; + if (strcasecmp(audio_std, "NICAM/B") == 0) + return V4L2_STD_NICAM_B; + + return 0; +} + +static int check_device_status(struct xc2028_data *priv) +{ + switch (priv->state) { + case XC2028_NO_FIRMWARE: + case XC2028_WAITING_FIRMWARE: + return -EAGAIN; + case XC2028_ACTIVE: + case XC2028_SLEEP: + return 0; + case XC2028_NODEV: + return -ENODEV; + } + return 0; +} + +static void free_firmware(struct xc2028_data *priv) +{ + int i; + tuner_dbg("%s called\n", __func__); + + if (!priv->firm) + return; + + for (i = 0; i < priv->firm_size; i++) + kfree(priv->firm[i].ptr); + + kfree(priv->firm); + + priv->firm = NULL; + priv->firm_size = 0; + priv->state = XC2028_NO_FIRMWARE; + + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); +} + +static int load_all_firmwares(struct dvb_frontend *fe, + const struct firmware *fw) +{ + struct xc2028_data *priv = fe->tuner_priv; + const unsigned char *p, *endp; + int rc = 0; + int n, n_array; + char name[33]; + + tuner_dbg("%s called\n", __func__); + + p = fw->data; + endp = p + fw->size; + + if (fw->size < sizeof(name) - 1 + 2 + 2) { + tuner_err("Error: firmware file %s has invalid size!\n", + priv->fname); + goto corrupt; + } + + memcpy(name, p, sizeof(name) - 1); + name[sizeof(name) - 1] = 0; + p += sizeof(name) - 1; + + priv->firm_version = get_unaligned_le16(p); + p += 2; + + n_array = get_unaligned_le16(p); + p += 2; + + tuner_info("Loading %d firmware images from %s, type: %s, ver %d.%d\n", + n_array, priv->fname, name, + priv->firm_version >> 8, priv->firm_version & 0xff); + + priv->firm = kcalloc(n_array, sizeof(*priv->firm), GFP_KERNEL); + if (priv->firm == NULL) { + tuner_err("Not enough memory to load firmware file.\n"); + rc = -ENOMEM; + goto err; + } + priv->firm_size = n_array; + + n = -1; + while (p < endp) { + __u32 type, size; + v4l2_std_id id; + __u16 int_freq = 0; + + n++; + if (n >= n_array) { + tuner_err("More firmware images in file than " + "were expected!\n"); + goto corrupt; + } + + /* Checks if there's enough bytes to read */ + if (endp - p < sizeof(type) + sizeof(id) + sizeof(size)) + goto header; + + type = get_unaligned_le32(p); + p += sizeof(type); + + id = get_unaligned_le64(p); + p += sizeof(id); + + if (type & HAS_IF) { + int_freq = get_unaligned_le16(p); + p += sizeof(int_freq); + if (endp - p < sizeof(size)) + goto header; + } + + size = get_unaligned_le32(p); + p += sizeof(size); + + if (!size || size > endp - p) { + tuner_err("Firmware type "); + dump_firm_type(type); + printk("(%x), id %llx is corrupted " + "(size=%d, expected %d)\n", + type, (unsigned long long)id, + (unsigned)(endp - p), size); + goto corrupt; + } + + priv->firm[n].ptr = kzalloc(size, GFP_KERNEL); + if (priv->firm[n].ptr == NULL) { + tuner_err("Not enough memory to load firmware file.\n"); + rc = -ENOMEM; + goto err; + } + tuner_dbg("Reading firmware type "); + if (debug) { + dump_firm_type_and_int_freq(type, int_freq); + printk("(%x), id %llx, size=%d.\n", + type, (unsigned long long)id, size); + } + + memcpy(priv->firm[n].ptr, p, size); + priv->firm[n].type = type; + priv->firm[n].id = id; + priv->firm[n].size = size; + priv->firm[n].int_freq = int_freq; + + p += size; + } + + if (n + 1 != priv->firm_size) { + tuner_err("Firmware file is incomplete!\n"); + goto corrupt; + } + + goto done; + +header: + tuner_err("Firmware header is incomplete!\n"); +corrupt: + rc = -EINVAL; + tuner_err("Error: firmware file is corrupted!\n"); + +err: + tuner_info("Releasing partially loaded firmware file.\n"); + free_firmware(priv); + +done: + if (rc == 0) + tuner_dbg("Firmware files loaded.\n"); + else + priv->state = XC2028_NODEV; + + return rc; +} + +static int seek_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id *id) +{ + struct xc2028_data *priv = fe->tuner_priv; + int i, best_i = -1, best_nr_matches = 0; + unsigned int type_mask = 0; + + tuner_dbg("%s called, want type=", __func__); + if (debug) { + dump_firm_type(type); + printk("(%x), id %016llx.\n", type, (unsigned long long)*id); + } + + if (!priv->firm) { + tuner_err("Error! firmware not loaded\n"); + return -EINVAL; + } + + if (((type & ~SCODE) == 0) && (*id == 0)) + *id = V4L2_STD_PAL; + + if (type & BASE) + type_mask = BASE_TYPES; + else if (type & SCODE) { + type &= SCODE_TYPES; + type_mask = SCODE_TYPES & ~HAS_IF; + } else if (type & DTV_TYPES) + type_mask = DTV_TYPES; + else if (type & STD_SPECIFIC_TYPES) + type_mask = STD_SPECIFIC_TYPES; + + type &= type_mask; + + if (!(type & SCODE)) + type_mask = ~0; + + /* Seek for exact match */ + for (i = 0; i < priv->firm_size; i++) { + if ((type == (priv->firm[i].type & type_mask)) && + (*id == priv->firm[i].id)) + goto found; + } + + /* Seek for generic video standard match */ + for (i = 0; i < priv->firm_size; i++) { + v4l2_std_id match_mask; + int nr_matches; + + if (type != (priv->firm[i].type & type_mask)) + continue; + + match_mask = *id & priv->firm[i].id; + if (!match_mask) + continue; + + if ((*id & match_mask) == *id) + goto found; /* Supports all the requested standards */ + + nr_matches = hweight64(match_mask); + if (nr_matches > best_nr_matches) { + best_nr_matches = nr_matches; + best_i = i; + } + } + + if (best_nr_matches > 0) { + tuner_dbg("Selecting best matching firmware (%d bits) for " + "type=", best_nr_matches); + dump_firm_type(type); + printk("(%x), id %016llx:\n", type, (unsigned long long)*id); + i = best_i; + goto found; + } + + /*FIXME: Would make sense to seek for type "hint" match ? */ + + i = -ENOENT; + goto ret; + +found: + *id = priv->firm[i].id; + +ret: + tuner_dbg("%s firmware for type=", (i < 0) ? "Can't find" : "Found"); + if (debug) { + dump_firm_type(type); + printk("(%x), id %016llx.\n", type, (unsigned long long)*id); + } + return i; +} + +static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg) +{ + struct xc2028_data *priv = fe->tuner_priv; + + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + + return (!fe->callback) ? -EINVAL : + fe->callback(((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : priv->i2c_props.adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, cmd, arg); +} + +static int load_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id *id) +{ + struct xc2028_data *priv = fe->tuner_priv; + int pos, rc; + unsigned char *p, *endp, buf[priv->ctrl.max_len]; + + tuner_dbg("%s called\n", __func__); + + pos = seek_firmware(fe, type, id); + if (pos < 0) + return pos; + + tuner_info("Loading firmware for type="); + dump_firm_type(priv->firm[pos].type); + printk("(%x), id %016llx.\n", priv->firm[pos].type, + (unsigned long long)*id); + + p = priv->firm[pos].ptr; + endp = p + priv->firm[pos].size; + + while (p < endp) { + __u16 size; + + /* Checks if there's enough bytes to read */ + if (p + sizeof(size) > endp) { + tuner_err("Firmware chunk size is wrong\n"); + return -EINVAL; + } + + size = le16_to_cpu(*(__u16 *) p); + p += sizeof(size); + + if (size == 0xffff) + return 0; + + if (!size) { + /* Special callback command received */ + rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0); + if (rc < 0) { + tuner_err("Error at RESET code %d\n", + (*p) & 0x7f); + return -EINVAL; + } + continue; + } + if (size >= 0xff00) { + switch (size) { + case 0xff00: + rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0); + if (rc < 0) { + tuner_err("Error at RESET code %d\n", + (*p) & 0x7f); + return -EINVAL; + } + break; + default: + tuner_info("Invalid RESET code %d\n", + size & 0x7f); + return -EINVAL; + + } + continue; + } + + /* Checks for a sleep command */ + if (size & 0x8000) { + msleep(size & 0x7fff); + continue; + } + + if ((size + p > endp)) { + tuner_err("missing bytes: need %d, have %d\n", + size, (int)(endp - p)); + return -EINVAL; + } + + buf[0] = *p; + p++; + size--; + + /* Sends message chunks */ + while (size > 0) { + int len = (size < priv->ctrl.max_len - 1) ? + size : priv->ctrl.max_len - 1; + + memcpy(buf + 1, p, len); + + rc = i2c_send(priv, buf, len + 1); + if (rc < 0) { + tuner_err("%d returned from send\n", rc); + return -EINVAL; + } + + p += len; + size -= len; + } + + /* silently fail if the frontend doesn't support I2C flush */ + rc = do_tuner_callback(fe, XC2028_I2C_FLUSH, 0); + if ((rc < 0) && (rc != -EINVAL)) { + tuner_err("error executing flush: %d\n", rc); + return rc; + } + } + return 0; +} + +static int load_scode(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id *id, __u16 int_freq, int scode) +{ + struct xc2028_data *priv = fe->tuner_priv; + int pos, rc; + unsigned char *p; + + tuner_dbg("%s called\n", __func__); + + if (!int_freq) { + pos = seek_firmware(fe, type, id); + if (pos < 0) + return pos; + } else { + for (pos = 0; pos < priv->firm_size; pos++) { + if ((priv->firm[pos].int_freq == int_freq) && + (priv->firm[pos].type & HAS_IF)) + break; + } + if (pos == priv->firm_size) + return -ENOENT; + } + + p = priv->firm[pos].ptr; + + if (priv->firm[pos].type & HAS_IF) { + if (priv->firm[pos].size != 12 * 16 || scode >= 16) + return -EINVAL; + p += 12 * scode; + } else { + /* 16 SCODE entries per file; each SCODE entry is 12 bytes and + * has a 2-byte size header in the firmware format. */ + if (priv->firm[pos].size != 14 * 16 || scode >= 16 || + le16_to_cpu(*(__u16 *)(p + 14 * scode)) != 12) + return -EINVAL; + p += 14 * scode + 2; + } + + tuner_info("Loading SCODE for type="); + dump_firm_type_and_int_freq(priv->firm[pos].type, + priv->firm[pos].int_freq); + printk("(%x), id %016llx.\n", priv->firm[pos].type, + (unsigned long long)*id); + + if (priv->firm_version < 0x0202) + rc = send_seq(priv, {0x20, 0x00, 0x00, 0x00}); + else + rc = send_seq(priv, {0xa0, 0x00, 0x00, 0x00}); + if (rc < 0) + return -EIO; + + rc = i2c_send(priv, p, 12); + if (rc < 0) + return -EIO; + + rc = send_seq(priv, {0x00, 0x8c}); + if (rc < 0) + return -EIO; + + return 0; +} + +static int check_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id std, __u16 int_freq) +{ + struct xc2028_data *priv = fe->tuner_priv; + struct firmware_properties new_fw; + int rc, retry_count = 0; + u16 version, hwmodel; + v4l2_std_id std0; + + tuner_dbg("%s called\n", __func__); + + rc = check_device_status(priv); + if (rc < 0) + return rc; + + if (priv->ctrl.mts && !(type & FM)) + type |= MTS; + +retry: + new_fw.type = type; + new_fw.id = std; + new_fw.std_req = std; + new_fw.scode_table = SCODE | priv->ctrl.scode_table; + new_fw.scode_nr = 0; + new_fw.int_freq = int_freq; + + tuner_dbg("checking firmware, user requested type="); + if (debug) { + dump_firm_type(new_fw.type); + printk("(%x), id %016llx, ", new_fw.type, + (unsigned long long)new_fw.std_req); + if (!int_freq) { + printk("scode_tbl "); + dump_firm_type(priv->ctrl.scode_table); + printk("(%x), ", priv->ctrl.scode_table); + } else + printk("int_freq %d, ", new_fw.int_freq); + printk("scode_nr %d\n", new_fw.scode_nr); + } + + /* + * No need to reload base firmware if it matches and if the tuner + * is not at sleep mode + */ + if ((priv->state == XC2028_ACTIVE) && + (((BASE | new_fw.type) & BASE_TYPES) == + (priv->cur_fw.type & BASE_TYPES))) { + tuner_dbg("BASE firmware not changed.\n"); + goto skip_base; + } + + /* Updating BASE - forget about all currently loaded firmware */ + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); + + /* Reset is needed before loading firmware */ + rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0); + if (rc < 0) + goto fail; + + /* BASE firmwares are all std0 */ + std0 = 0; + rc = load_firmware(fe, BASE | new_fw.type, &std0); + if (rc < 0) { + tuner_err("Error %d while loading base firmware\n", + rc); + goto fail; + } + + /* Load INIT1, if needed */ + tuner_dbg("Load init1 firmware, if exists\n"); + + rc = load_firmware(fe, BASE | INIT1 | new_fw.type, &std0); + if (rc == -ENOENT) + rc = load_firmware(fe, (BASE | INIT1 | new_fw.type) & ~F8MHZ, + &std0); + if (rc < 0 && rc != -ENOENT) { + tuner_err("Error %d while loading init1 firmware\n", + rc); + goto fail; + } + +skip_base: + /* + * No need to reload standard specific firmware if base firmware + * was not reloaded and requested video standards have not changed. + */ + if (priv->cur_fw.type == (BASE | new_fw.type) && + priv->cur_fw.std_req == std) { + tuner_dbg("Std-specific firmware already loaded.\n"); + goto skip_std_specific; + } + + /* Reloading std-specific firmware forces a SCODE update */ + priv->cur_fw.scode_table = 0; + + rc = load_firmware(fe, new_fw.type, &new_fw.id); + if (rc == -ENOENT) + rc = load_firmware(fe, new_fw.type & ~F8MHZ, &new_fw.id); + + if (rc < 0) + goto fail; + +skip_std_specific: + if (priv->cur_fw.scode_table == new_fw.scode_table && + priv->cur_fw.scode_nr == new_fw.scode_nr) { + tuner_dbg("SCODE firmware already loaded.\n"); + goto check_device; + } + + if (new_fw.type & FM) + goto check_device; + + /* Load SCODE firmware, if exists */ + tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr); + + rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id, + new_fw.int_freq, new_fw.scode_nr); + +check_device: + if (xc2028_get_reg(priv, 0x0004, &version) < 0 || + xc2028_get_reg(priv, 0x0008, &hwmodel) < 0) { + tuner_err("Unable to read tuner registers.\n"); + goto fail; + } + + tuner_dbg("Device is Xceive %d version %d.%d, " + "firmware version %d.%d\n", + hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, + (version & 0xf0) >> 4, version & 0xf); + + + if (priv->ctrl.read_not_reliable) + goto read_not_reliable; + + /* Check firmware version against what we downloaded. */ + if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) { + if (!priv->ctrl.read_not_reliable) { + tuner_err("Incorrect readback of firmware version.\n"); + goto fail; + } else { + tuner_err("Returned an incorrect version. However, " + "read is not reliable enough. Ignoring it.\n"); + hwmodel = 3028; + } + } + + /* Check that the tuner hardware model remains consistent over time. */ + if (priv->hwmodel == 0 && (hwmodel == 2028 || hwmodel == 3028)) { + priv->hwmodel = hwmodel; + priv->hwvers = version & 0xff00; + } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel || + priv->hwvers != (version & 0xff00)) { + tuner_err("Read invalid device hardware information - tuner " + "hung?\n"); + goto fail; + } + +read_not_reliable: + memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw)); + + /* + * By setting BASE in cur_fw.type only after successfully loading all + * firmwares, we can: + * 1. Identify that BASE firmware with type=0 has been loaded; + * 2. Tell whether BASE firmware was just changed the next time through. + */ + priv->cur_fw.type |= BASE; + priv->state = XC2028_ACTIVE; + + return 0; + +fail: + priv->state = XC2028_SLEEP; + + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); + if (retry_count < 8) { + msleep(50); + retry_count++; + tuner_dbg("Retrying firmware load\n"); + goto retry; + } + + if (rc == -ENOENT) + rc = -EINVAL; + return rc; +} + +static int xc2028_signal(struct dvb_frontend *fe, u16 *strength) +{ + struct xc2028_data *priv = fe->tuner_priv; + u16 frq_lock, signal = 0; + int rc, i; + + tuner_dbg("%s called\n", __func__); + + rc = check_device_status(priv); + if (rc < 0) + return rc; + + mutex_lock(&priv->lock); + + /* Sync Lock Indicator */ + for (i = 0; i < 3; i++) { + rc = xc2028_get_reg(priv, XREG_LOCK, &frq_lock); + if (rc < 0) + goto ret; + + if (frq_lock) + break; + msleep(6); + } + + /* Frequency didn't lock */ + if (frq_lock == 2) + goto ret; + + /* Get SNR of the video signal */ + rc = xc2028_get_reg(priv, XREG_SNR, &signal); + if (rc < 0) + goto ret; + + /* Signal level is 3 bits only */ + + signal = ((1 << 12) - 1) | ((signal & 0x07) << 12); + +ret: + mutex_unlock(&priv->lock); + + *strength = signal; + + tuner_dbg("signal strength is %d\n", signal); + + return rc; +} + +static int xc2028_get_afc(struct dvb_frontend *fe, s32 *afc) +{ + struct xc2028_data *priv = fe->tuner_priv; + int i, rc; + u16 frq_lock = 0; + s16 afc_reg = 0; + + rc = check_device_status(priv); + if (rc < 0) + return rc; + + mutex_lock(&priv->lock); + + /* Sync Lock Indicator */ + for (i = 0; i < 3; i++) { + rc = xc2028_get_reg(priv, XREG_LOCK, &frq_lock); + if (rc < 0) + goto ret; + + if (frq_lock) + break; + msleep(6); + } + + /* Frequency didn't lock */ + if (frq_lock == 2) + goto ret; + + /* Get AFC */ + rc = xc2028_get_reg(priv, XREG_FREQ_ERROR, &afc_reg); + if (rc < 0) + goto ret; + + *afc = afc_reg * 15625; /* Hz */ + + tuner_dbg("AFC is %d Hz\n", *afc); + +ret: + mutex_unlock(&priv->lock); + + return rc; +} + +#define DIV 15625 + +static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, + enum v4l2_tuner_type new_type, + unsigned int type, + v4l2_std_id std, + u16 int_freq) +{ + struct xc2028_data *priv = fe->tuner_priv; + int rc = -EINVAL; + unsigned char buf[4]; + u32 div, offset = 0; + + tuner_dbg("%s called\n", __func__); + + mutex_lock(&priv->lock); + + tuner_dbg("should set frequency %d kHz\n", freq / 1000); + + if (check_firmware(fe, type, std, int_freq) < 0) + goto ret; + + /* On some cases xc2028 can disable video output, if + * very weak signals are received. By sending a soft + * reset, this is re-enabled. So, it is better to always + * send a soft reset before changing channels, to be sure + * that xc2028 will be in a safe state. + * Maybe this might also be needed for DTV. + */ + switch (new_type) { + case V4L2_TUNER_ANALOG_TV: + rc = send_seq(priv, {0x00, 0x00}); + + /* Analog mode requires offset = 0 */ + break; + case V4L2_TUNER_RADIO: + /* Radio mode requires offset = 0 */ + break; + case V4L2_TUNER_DIGITAL_TV: + /* + * Digital modes require an offset to adjust to the + * proper frequency. The offset depends on what + * firmware version is used. + */ + + /* + * Adjust to the center frequency. This is calculated by the + * formula: offset = 1.25MHz - BW/2 + * For DTV 7/8, the firmware uses BW = 8000, so it needs a + * further adjustment to get the frequency center on VHF + */ + + /* + * The firmware DTV78 used to work fine in UHF band (8 MHz + * bandwidth) but not at all in VHF band (7 MHz bandwidth). + * The real problem was connected to the formula used to + * calculate the center frequency offset in VHF band. + * In fact, removing the 500KHz adjustment fixed the problem. + * This is coherent to what was implemented for the DTV7 + * firmware. + * In the end, now the center frequency is the same for all 3 + * firmwares (DTV7, DTV8, DTV78) and doesn't depend on channel + * bandwidth. + */ + + if (priv->cur_fw.type & DTV6) + offset = 1750000; + else /* DTV7 or DTV8 or DTV78 */ + offset = 2750000; + + /* + * xc3028 additional "magic" + * Depending on the firmware version, it needs some adjustments + * to properly centralize the frequency. This seems to be + * needed to compensate the SCODE table adjustments made by + * newer firmwares + */ + + /* + * The proper adjustment would be to do it at s-code table. + * However, this didn't work, as reported by + * Robert Lowery <rglowery@exemail.com.au> + */ + +#if 0 + /* + * Still need tests for XC3028L (firmware 3.2 or upper) + * So, for now, let's just comment the per-firmware + * version of this change. Reports with xc3028l working + * with and without the lines bellow are welcome + */ + + if (priv->firm_version < 0x0302) { + if (priv->cur_fw.type & DTV7) + offset += 500000; + } else { + if (priv->cur_fw.type & DTV7) + offset -= 300000; + else if (type != ATSC) /* DVB @6MHz, DTV 8 and DTV 7/8 */ + offset += 200000; + } +#endif + } + + div = (freq - offset + DIV / 2) / DIV; + + /* CMD= Set frequency */ + if (priv->firm_version < 0x0202) + rc = send_seq(priv, {0x00, XREG_RF_FREQ, 0x00, 0x00}); + else + rc = send_seq(priv, {0x80, XREG_RF_FREQ, 0x00, 0x00}); + if (rc < 0) + goto ret; + + /* Return code shouldn't be checked. + The reset CLK is needed only with tm6000. + Driver should work fine even if this fails. + */ + if (priv->ctrl.msleep) + msleep(priv->ctrl.msleep); + do_tuner_callback(fe, XC2028_RESET_CLK, 1); + + msleep(10); + + buf[0] = 0xff & (div >> 24); + buf[1] = 0xff & (div >> 16); + buf[2] = 0xff & (div >> 8); + buf[3] = 0xff & (div); + + rc = i2c_send(priv, buf, sizeof(buf)); + if (rc < 0) + goto ret; + msleep(100); + + priv->frequency = freq; + + tuner_dbg("divisor= %*ph (freq=%d.%03d)\n", 4, buf, + freq / 1000000, (freq % 1000000) / 1000); + + rc = 0; + +ret: + mutex_unlock(&priv->lock); + + return rc; +} + +static int xc2028_set_analog_freq(struct dvb_frontend *fe, + struct analog_parameters *p) +{ + struct xc2028_data *priv = fe->tuner_priv; + unsigned int type=0; + + tuner_dbg("%s called\n", __func__); + + if (p->mode == V4L2_TUNER_RADIO) { + type |= FM; + if (priv->ctrl.input1) + type |= INPUT1; + return generic_set_freq(fe, (625l * p->frequency) / 10, + V4L2_TUNER_RADIO, type, 0, 0); + } + + /* if std is not defined, choose one */ + if (!p->std) + p->std = V4L2_STD_MN; + + /* PAL/M, PAL/N, PAL/Nc and NTSC variants should use 6MHz firmware */ + if (!(p->std & V4L2_STD_MN)) + type |= F8MHZ; + + /* Add audio hack to std mask */ + p->std |= parse_audio_std_option(); + + return generic_set_freq(fe, 62500l * p->frequency, + V4L2_TUNER_ANALOG_TV, type, p->std, 0); +} + +static int xc2028_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u32 delsys = c->delivery_system; + u32 bw = c->bandwidth_hz; + struct xc2028_data *priv = fe->tuner_priv; + int rc; + unsigned int type = 0; + u16 demod = 0; + + tuner_dbg("%s called\n", __func__); + + rc = check_device_status(priv); + if (rc < 0) + return rc; + + switch (delsys) { + case SYS_DVBT: + case SYS_DVBT2: + /* + * The only countries with 6MHz seem to be Taiwan/Uruguay. + * Both seem to require QAM firmware for OFDM decoding + * Tested in Taiwan by Terry Wu <terrywu2009@gmail.com> + */ + if (bw <= 6000000) + type |= QAM; + + switch (priv->ctrl.type) { + case XC2028_D2633: + type |= D2633; + break; + case XC2028_D2620: + type |= D2620; + break; + case XC2028_AUTO: + default: + /* Zarlink seems to need D2633 */ + if (priv->ctrl.demod == XC3028_FE_ZARLINK456) + type |= D2633; + else + type |= D2620; + } + break; + case SYS_ATSC: + /* The only ATSC firmware (at least on v2.7) is D2633 */ + type |= ATSC | D2633; + break; + /* DVB-S and pure QAM (FE_QAM) are not supported */ + default: + return -EINVAL; + } + + if (bw <= 6000000) { + type |= DTV6; + priv->ctrl.vhfbw7 = 0; + priv->ctrl.uhfbw8 = 0; + } else if (bw <= 7000000) { + if (c->frequency < 470000000) + priv->ctrl.vhfbw7 = 1; + else + priv->ctrl.uhfbw8 = 0; + type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV7; + type |= F8MHZ; + } else { + if (c->frequency < 470000000) + priv->ctrl.vhfbw7 = 0; + else + priv->ctrl.uhfbw8 = 1; + type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV8; + type |= F8MHZ; + } + + /* All S-code tables need a 200kHz shift */ + if (priv->ctrl.demod) { + demod = priv->ctrl.demod; + + /* + * Newer firmwares require a 200 kHz offset only for ATSC + */ + if (type == ATSC || priv->firm_version < 0x0302) + demod += 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + * + * Unfortunately, on real-field tests, the s-code offset + * didn't work as expected, as reported by + * Robert Lowery <rglowery@exemail.com.au> + */ + } + + return generic_set_freq(fe, c->frequency, + V4L2_TUNER_DIGITAL_TV, type, 0, demod); +} + +static int xc2028_sleep(struct dvb_frontend *fe) +{ + struct xc2028_data *priv = fe->tuner_priv; + int rc; + + rc = check_device_status(priv); + if (rc < 0) + return rc; + + /* Avoid firmware reload on slow devices or if PM disabled */ + if (no_poweroff || priv->ctrl.disable_power_mgmt) + return 0; + + tuner_dbg("Putting xc2028/3028 into poweroff mode.\n"); + if (debug > 1) { + tuner_dbg("Printing sleep stack trace:\n"); + dump_stack(); + } + + mutex_lock(&priv->lock); + + if (priv->firm_version < 0x0202) + rc = send_seq(priv, {0x00, XREG_POWER_DOWN, 0x00, 0x00}); + else + rc = send_seq(priv, {0x80, XREG_POWER_DOWN, 0x00, 0x00}); + + priv->state = XC2028_SLEEP; + + mutex_unlock(&priv->lock); + + return rc; +} + +static int xc2028_dvb_release(struct dvb_frontend *fe) +{ + struct xc2028_data *priv = fe->tuner_priv; + + tuner_dbg("%s called\n", __func__); + + mutex_lock(&xc2028_list_mutex); + + /* only perform final cleanup if this is the last instance */ + if (hybrid_tuner_report_instance_count(priv) == 1) { + free_firmware(priv); + kfree(priv->ctrl.fname); + priv->ctrl.fname = NULL; + } + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&xc2028_list_mutex); + + fe->tuner_priv = NULL; + + return 0; +} + +static int xc2028_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct xc2028_data *priv = fe->tuner_priv; + int rc; + + tuner_dbg("%s called\n", __func__); + + rc = check_device_status(priv); + if (rc < 0) + return rc; + + *frequency = priv->frequency; + + return 0; +} + +static void load_firmware_cb(const struct firmware *fw, + void *context) +{ + struct dvb_frontend *fe = context; + struct xc2028_data *priv = fe->tuner_priv; + int rc; + + tuner_dbg("request_firmware_nowait(): %s\n", fw ? "OK" : "error"); + if (!fw) { + tuner_err("Could not load firmware %s.\n", priv->fname); + priv->state = XC2028_NODEV; + return; + } + + rc = load_all_firmwares(fe, fw); + + release_firmware(fw); + + if (rc < 0) + return; + priv->state = XC2028_SLEEP; +} + +static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg) +{ + struct xc2028_data *priv = fe->tuner_priv; + struct xc2028_ctrl *p = priv_cfg; + int rc = 0; + + tuner_dbg("%s called\n", __func__); + + mutex_lock(&priv->lock); + + /* + * Copy the config data. + * For the firmware name, keep a local copy of the string, + * in order to avoid troubles during device release. + */ + if (priv->ctrl.fname) + kfree(priv->ctrl.fname); + memcpy(&priv->ctrl, p, sizeof(priv->ctrl)); + if (p->fname) { + priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL); + if (priv->ctrl.fname == NULL) + rc = -ENOMEM; + } + + /* + * If firmware name changed, frees firmware. As free_firmware will + * reset the status to NO_FIRMWARE, this forces a new request_firmware + */ + if (!firmware_name[0] && p->fname && + priv->fname && strcmp(p->fname, priv->fname)) + free_firmware(priv); + + if (priv->ctrl.max_len < 9) + priv->ctrl.max_len = 13; + + if (priv->state == XC2028_NO_FIRMWARE) { + if (!firmware_name[0]) + priv->fname = priv->ctrl.fname; + else + priv->fname = firmware_name; + + rc = request_firmware_nowait(THIS_MODULE, 1, + priv->fname, + priv->i2c_props.adap->dev.parent, + GFP_KERNEL, + fe, load_firmware_cb); + if (rc < 0) { + tuner_err("Failed to request firmware %s\n", + priv->fname); + priv->state = XC2028_NODEV; + } else + priv->state = XC2028_WAITING_FIRMWARE; + } + mutex_unlock(&priv->lock); + + return rc; +} + +static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = { + .info = { + .name = "Xceive XC3028", + .frequency_min = 42000000, + .frequency_max = 864000000, + .frequency_step = 50000, + }, + + .set_config = xc2028_set_config, + .set_analog_params = xc2028_set_analog_freq, + .release = xc2028_dvb_release, + .get_frequency = xc2028_get_frequency, + .get_rf_strength = xc2028_signal, + .get_afc = xc2028_get_afc, + .set_params = xc2028_set_params, + .sleep = xc2028_sleep, +}; + +struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, + struct xc2028_config *cfg) +{ + struct xc2028_data *priv; + int instance; + + if (debug) + printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n"); + + if (NULL == cfg) + return NULL; + + if (!fe) { + printk(KERN_ERR "xc2028: No frontend!\n"); + return NULL; + } + + mutex_lock(&xc2028_list_mutex); + + instance = hybrid_tuner_request_state(struct xc2028_data, priv, + hybrid_tuner_instance_list, + cfg->i2c_adap, cfg->i2c_addr, + "xc2028"); + switch (instance) { + case 0: + /* memory allocation failure */ + goto fail; + break; + case 1: + /* new tuner instance */ + priv->ctrl.max_len = 13; + + mutex_init(&priv->lock); + + fe->tuner_priv = priv; + break; + case 2: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } + + memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops, + sizeof(xc2028_dvb_tuner_ops)); + + tuner_info("type set to %s\n", "XCeive xc2028/xc3028 tuner"); + + if (cfg->ctrl) + xc2028_set_config(fe, cfg->ctrl); + + mutex_unlock(&xc2028_list_mutex); + + return fe; +fail: + mutex_unlock(&xc2028_list_mutex); + + xc2028_dvb_release(fe); + return NULL; +} + +EXPORT_SYMBOL(xc2028_attach); + +MODULE_DESCRIPTION("Xceive xc2028/xc3028 tuner driver"); +MODULE_AUTHOR("Michel Ludwig <michel.ludwig@gmail.com>"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE(XC2028_DEFAULT_FIRMWARE); +MODULE_FIRMWARE(XC3028L_DEFAULT_FIRMWARE); |
