diff options
Diffstat (limited to 'drivers/media/tuners/fc0011.c')
| -rw-r--r-- | drivers/media/tuners/fc0011.c | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/drivers/media/tuners/fc0011.c b/drivers/media/tuners/fc0011.c new file mode 100644 index 000000000000..e4882546c283 --- /dev/null +++ b/drivers/media/tuners/fc0011.c @@ -0,0 +1,524 @@ +/* + * Fitipower FC0011 tuner driver + * + * Copyright (C) 2012 Michael Buesch <m@bues.ch> + * + * Derived from FC0012 tuner driver: + * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "fc0011.h" + + +/* Tuner registers */ +enum { + FC11_REG_0, + FC11_REG_FA, /* FA */ + FC11_REG_FP, /* FP */ + FC11_REG_XINHI, /* XIN high 8 bit */ + FC11_REG_XINLO, /* XIN low 8 bit */ + FC11_REG_VCO, /* VCO */ + FC11_REG_VCOSEL, /* VCO select */ + FC11_REG_7, /* Unknown tuner reg 7 */ + FC11_REG_8, /* Unknown tuner reg 8 */ + FC11_REG_9, + FC11_REG_10, /* Unknown tuner reg 10 */ + FC11_REG_11, /* Unknown tuner reg 11 */ + FC11_REG_12, + FC11_REG_RCCAL, /* RC calibrate */ + FC11_REG_VCOCAL, /* VCO calibrate */ + FC11_REG_15, + FC11_REG_16, /* Unknown tuner reg 16 */ + FC11_REG_17, + + FC11_NR_REGS, /* Number of registers */ +}; + +enum FC11_REG_VCOSEL_bits { + FC11_VCOSEL_2 = 0x08, /* VCO select 2 */ + FC11_VCOSEL_1 = 0x10, /* VCO select 1 */ + FC11_VCOSEL_CLKOUT = 0x20, /* Fix clock out */ + FC11_VCOSEL_BW7M = 0x40, /* 7MHz bw */ + FC11_VCOSEL_BW6M = 0x80, /* 6MHz bw */ +}; + +enum FC11_REG_RCCAL_bits { + FC11_RCCAL_FORCE = 0x10, /* force */ +}; + +enum FC11_REG_VCOCAL_bits { + FC11_VCOCAL_RUN = 0, /* VCO calibration run */ + FC11_VCOCAL_VALUEMASK = 0x3F, /* VCO calibration value mask */ + FC11_VCOCAL_OK = 0x40, /* VCO calibration Ok */ + FC11_VCOCAL_RESET = 0x80, /* VCO calibration reset */ +}; + + +struct fc0011_priv { + struct i2c_adapter *i2c; + u8 addr; + + u32 frequency; + u32 bandwidth; +}; + + +static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val) +{ + u8 buf[2] = { reg, val }; + struct i2c_msg msg = { .addr = priv->addr, + .flags = 0, .buf = buf, .len = 2 }; + + if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + dev_err(&priv->i2c->dev, + "I2C write reg failed, reg: %02x, val: %02x\n", + reg, val); + return -EIO; + } + + return 0; +} + +static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val) +{ + u8 dummy; + struct i2c_msg msg[2] = { + { .addr = priv->addr, + .flags = 0, .buf = ®, .len = 1 }, + { .addr = priv->addr, + .flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 }, + }; + + if (i2c_transfer(priv->i2c, msg, 2) != 2) { + dev_err(&priv->i2c->dev, + "I2C read failed, reg: %02x\n", reg); + return -EIO; + } + + return 0; +} + +static int fc0011_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + + return 0; +} + +static int fc0011_init(struct dvb_frontend *fe) +{ + struct fc0011_priv *priv = fe->tuner_priv; + int err; + + if (WARN_ON(!fe->callback)) + return -EINVAL; + + err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + FC0011_FE_CALLBACK_POWER, priv->addr); + if (err) { + dev_err(&priv->i2c->dev, "Power-on callback failed\n"); + return err; + } + err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + FC0011_FE_CALLBACK_RESET, priv->addr); + if (err) { + dev_err(&priv->i2c->dev, "Reset callback failed\n"); + return err; + } + + return 0; +} + +/* Initiate VCO calibration */ +static int fc0011_vcocal_trigger(struct fc0011_priv *priv) +{ + int err; + + err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET); + if (err) + return err; + err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN); + if (err) + return err; + + return 0; +} + +/* Read VCO calibration value */ +static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value) +{ + int err; + + err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN); + if (err) + return err; + usleep_range(10000, 20000); + err = fc0011_readreg(priv, FC11_REG_VCOCAL, value); + if (err) + return err; + + return 0; +} + +static int fc0011_set_params(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct fc0011_priv *priv = fe->tuner_priv; + int err; + unsigned int i, vco_retries; + u32 freq = p->frequency / 1000; + u32 bandwidth = p->bandwidth_hz / 1000; + u32 fvco, xin, xdiv, xdivr; + u16 frac; + u8 fa, fp, vco_sel, vco_cal; + u8 regs[FC11_NR_REGS] = { }; + + regs[FC11_REG_7] = 0x0F; + regs[FC11_REG_8] = 0x3E; + regs[FC11_REG_10] = 0xB8; + regs[FC11_REG_11] = 0x80; + regs[FC11_REG_RCCAL] = 0x04; + err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]); + err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]); + err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]); + err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]); + err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]); + if (err) + return -EIO; + + /* Set VCO freq and VCO div */ + if (freq < 54000) { + fvco = freq * 64; + regs[FC11_REG_VCO] = 0x82; + } else if (freq < 108000) { + fvco = freq * 32; + regs[FC11_REG_VCO] = 0x42; + } else if (freq < 216000) { + fvco = freq * 16; + regs[FC11_REG_VCO] = 0x22; + } else if (freq < 432000) { + fvco = freq * 8; + regs[FC11_REG_VCO] = 0x12; + } else { + fvco = freq * 4; + regs[FC11_REG_VCO] = 0x0A; + } + + /* Calc XIN. The PLL reference frequency is 18 MHz. */ + xdiv = fvco / 18000; + frac = fvco - xdiv * 18000; + frac = (frac << 15) / 18000; + if (frac >= 16384) + frac += 32786; + if (!frac) + xin = 0; + else if (frac < 511) + xin = 512; + else if (frac < 65026) + xin = frac; + else + xin = 65024; + regs[FC11_REG_XINHI] = xin >> 8; + regs[FC11_REG_XINLO] = xin; + + /* Calc FP and FA */ + xdivr = xdiv; + if (fvco - xdiv * 18000 >= 9000) + xdivr += 1; /* round */ + fp = xdivr / 8; + fa = xdivr - fp * 8; + if (fa < 2) { + fp -= 1; + fa += 8; + } + if (fp > 0x1F) { + fp &= 0x1F; + fa &= 0xF; + } + if (fa >= fp) { + dev_warn(&priv->i2c->dev, + "fa %02X >= fp %02X, but trying to continue\n", + (unsigned int)(u8)fa, (unsigned int)(u8)fp); + } + regs[FC11_REG_FA] = fa; + regs[FC11_REG_FP] = fp; + + /* Select bandwidth */ + switch (bandwidth) { + case 8000: + break; + case 7000: + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M; + break; + default: + dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. " + "Using 6000 kHz.\n", + bandwidth); + bandwidth = 6000; + /* fallthrough */ + case 6000: + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M; + break; + } + + /* Pre VCO select */ + if (fvco < 2320000) { + vco_sel = 0; + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + } else if (fvco < 3080000) { + vco_sel = 1; + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; + } else { + vco_sel = 2; + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2; + } + + /* Fix for low freqs */ + if (freq < 45000) { + regs[FC11_REG_FA] = 0x6; + regs[FC11_REG_FP] = 0x11; + } + + /* Clock out fix */ + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT; + + /* Write the cached registers */ + for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) { + err = fc0011_writereg(priv, i, regs[i]); + if (err) + return err; + } + + /* VCO calibration */ + err = fc0011_vcocal_trigger(priv); + if (err) + return err; + err = fc0011_vcocal_read(priv, &vco_cal); + if (err) + return err; + vco_retries = 0; + while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) { + /* Reset the tuner and try again */ + err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER, + FC0011_FE_CALLBACK_RESET, priv->addr); + if (err) { + dev_err(&priv->i2c->dev, "Failed to reset tuner\n"); + return err; + } + /* Reinit tuner config */ + err = 0; + for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) + err |= fc0011_writereg(priv, i, regs[i]); + err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]); + err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]); + err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]); + err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]); + err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]); + if (err) + return -EIO; + /* VCO calibration */ + err = fc0011_vcocal_trigger(priv); + if (err) + return err; + err = fc0011_vcocal_read(priv, &vco_cal); + if (err) + return err; + vco_retries++; + } + if (!(vco_cal & FC11_VCOCAL_OK)) { + dev_err(&priv->i2c->dev, + "Failed to read VCO calibration value (got %02X)\n", + (unsigned int)vco_cal); + return -EIO; + } + vco_cal &= FC11_VCOCAL_VALUEMASK; + + switch (vco_sel) { + case 0: + if (vco_cal < 8) { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + err = fc0011_vcocal_trigger(priv); + if (err) + return err; + } else { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + } + break; + case 1: + if (vco_cal < 5) { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2; + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + err = fc0011_vcocal_trigger(priv); + if (err) + return err; + } else if (vco_cal <= 48) { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + } else { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + err = fc0011_vcocal_trigger(priv); + if (err) + return err; + } + break; + case 2: + if (vco_cal > 53) { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1; + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + err = fc0011_vcocal_trigger(priv); + if (err) + return err; + } else { + regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2); + regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2; + err = fc0011_writereg(priv, FC11_REG_VCOSEL, + regs[FC11_REG_VCOSEL]); + if (err) + return err; + } + break; + } + err = fc0011_vcocal_read(priv, NULL); + if (err) + return err; + usleep_range(10000, 50000); + + err = fc0011_readreg(priv, FC11_REG_RCCAL, ®s[FC11_REG_RCCAL]); + if (err) + return err; + regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE; + err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]); + if (err) + return err; + err = fc0011_writereg(priv, FC11_REG_16, 0xB); + if (err) + return err; + + dev_dbg(&priv->i2c->dev, "Tuned to " + "fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X " + "vcocal=%02X(%u) bw=%u\n", + (unsigned int)regs[FC11_REG_FA], + (unsigned int)regs[FC11_REG_FP], + (unsigned int)regs[FC11_REG_XINHI], + (unsigned int)regs[FC11_REG_XINLO], + (unsigned int)regs[FC11_REG_VCO], + (unsigned int)regs[FC11_REG_VCOSEL], + (unsigned int)vco_cal, vco_retries, + (unsigned int)bandwidth); + + priv->frequency = p->frequency; + priv->bandwidth = p->bandwidth_hz; + + return 0; +} + +static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct fc0011_priv *priv = fe->tuner_priv; + + *frequency = priv->frequency; + + return 0; +} + +static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + *frequency = 0; + + return 0; +} + +static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct fc0011_priv *priv = fe->tuner_priv; + + *bandwidth = priv->bandwidth; + + return 0; +} + +static const struct dvb_tuner_ops fc0011_tuner_ops = { + .info = { + .name = "Fitipower FC0011", + + .frequency_min = 45000000, + .frequency_max = 1000000000, + }, + + .release = fc0011_release, + .init = fc0011_init, + + .set_params = fc0011_set_params, + + .get_frequency = fc0011_get_frequency, + .get_if_frequency = fc0011_get_if_frequency, + .get_bandwidth = fc0011_get_bandwidth, +}; + +struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + const struct fc0011_config *config) +{ + struct fc0011_priv *priv; + + priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL); + if (!priv) + return NULL; + + priv->i2c = i2c; + priv->addr = config->i2c_address; + + fe->tuner_priv = priv; + fe->ops.tuner_ops = fc0011_tuner_ops; + + dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n"); + + return fe; +} +EXPORT_SYMBOL(fc0011_attach); + +MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver"); +MODULE_AUTHOR("Michael Buesch <m@bues.ch>"); +MODULE_LICENSE("GPL"); |
