diff options
Diffstat (limited to 'drivers/media/i2c')
104 files changed, 58004 insertions, 0 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig new file mode 100644 index 000000000000..1c677f5e3a1a --- /dev/null +++ b/drivers/media/i2c/Kconfig @@ -0,0 +1,566 @@ +# +# Generic video config states +# + +config VIDEO_BTCX + depends on PCI + tristate + +config VIDEO_TVEEPROM + tristate + depends on I2C + +# +# Multimedia Video device configuration +# + +if VIDEO_V4L2 + +config VIDEO_HELPER_CHIPS_AUTO + bool "Autoselect pertinent encoders/decoders and other helper chips" + default y if !EXPERT + ---help--- + Most video cards may require additional modules to encode or + decode audio/video standards. This option will autoselect + all pertinent modules to each selected video module. + + Unselect this only if you know exactly what you are doing, since + it may break support on some boards. + + In doubt, say Y. + +config VIDEO_IR_I2C + tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO + depends on I2C && RC_CORE + default y + ---help--- + Most boards have an IR chip directly connected via GPIO. However, + some video boards have the IR connected via I2C bus. + + If your board doesn't have an I2C IR chip, you may disable this + option. + + In doubt, say Y. + +# +# Encoder / Decoder module configuration +# + +menu "Encoders, decoders, sensors and other helper chips" + visible if !VIDEO_HELPER_CHIPS_AUTO + +comment "Audio decoders, processors and mixers" + +config VIDEO_TVAUDIO + tristate "Simple audio decoder chips" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for several audio decoder chips found on some bt8xx boards: + Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, + tea6320, tea6420, tda8425, ta8874z. + Microchip: pic16c54 based design on ProVideo PV951 board. + + To compile this driver as a module, choose M here: the + module will be called tvaudio. + +config VIDEO_TDA7432 + tristate "Philips TDA7432 audio processor" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for tda7432 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tda7432. + +config VIDEO_TDA9840 + tristate "Philips TDA9840 audio processor" + depends on I2C + ---help--- + Support for tda9840 audio decoder chip found on some Zoran boards. + + To compile this driver as a module, choose M here: the + module will be called tda9840. + +config VIDEO_TEA6415C + tristate "Philips TEA6415C audio processor" + depends on I2C + ---help--- + Support for tea6415c audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6415c. + +config VIDEO_TEA6420 + tristate "Philips TEA6420 audio processor" + depends on I2C + ---help--- + Support for tea6420 audio decoder chip found on some bt8xx boards. + + To compile this driver as a module, choose M here: the + module will be called tea6420. + +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400. + +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs5345. + +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs53l32a. + +config VIDEO_TLV320AIC23B + tristate "Texas Instruments TLV320AIC23B audio codec" + depends on VIDEO_V4L2 && I2C && EXPERIMENTAL + ---help--- + Support for the Texas Instruments TLV320AIC23B audio codec. + + To compile this driver as a module, choose M here: the + module will be called tlv320aic23b. + +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8775 high + performance stereo A/D Converter with a 4 channel input mixer. + + To compile this driver as a module, choose M here: the + module will be called wm8775. + +config VIDEO_WM8739 + tristate "Wolfson Microelectronics WM8739 stereo audio ADC" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Wolfson Microelectronics WM8739 + stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8739. + +config VIDEO_VP27SMPX + tristate "Panasonic VP27s internal MPX" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the internal MPX of the Panasonic VP27s tuner. + + To compile this driver as a module, choose M here: the + module will be called vp27smpx. + +comment "RDS decoders" + +config VIDEO_SAA6588 + tristate "SAA6588 Radio Chip RDS decoder support" + depends on VIDEO_V4L2 && I2C + + help + Support for this Radio Data System (RDS) decoder. This allows + seeing radio station identification transmitted using this + standard. + + To compile this driver as a module, choose M here: the + module will be called saa6588. + +comment "Video decoders" + +config VIDEO_ADV7180 + tristate "Analog Devices ADV7180 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7180 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7180. + +config VIDEO_ADV7183 + tristate "Analog Devices ADV7183 decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + V4l2 subdevice driver for the Analog Devices + ADV7183 video decoder. + + To compile this driver as a module, choose M here: the + module will be called adv7183. + +config VIDEO_BT819 + tristate "BT819A VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT819A video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt819. + +config VIDEO_BT856 + tristate "BT856 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT856 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt856. + +config VIDEO_BT866 + tristate "BT866 VideoStream decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for BT866 video decoder. + + To compile this driver as a module, choose M here: the + module will be called bt866. + +config VIDEO_KS0127 + tristate "KS0127 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for KS0127 video decoder. + + This chip is used on AverMedia AVS6EYES Zoran-based MJPEG + cards. + + To compile this driver as a module, choose M here: the + module will be called ks0127. + +config VIDEO_SAA7110 + tristate "Philips SAA7110 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7110 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7110. + +config VIDEO_SAA711X + tristate "Philips SAA7111/3/4/5 video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7111/3/4/5 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7115. + +config VIDEO_SAA7191 + tristate "Philips SAA7191 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7191 video decoder. + + To compile this driver as a module, choose M here: the + module will be called saa7191. + +config VIDEO_TVP514X + tristate "Texas Instruments TVP514x video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 + decoder. It is currently working with the TI OMAP3 camera + controller. + + To compile this driver as a module, choose M here: the + module will be called tvp514x. + +config VIDEO_TVP5150 + tristate "Texas Instruments TVP5150 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP5150 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp5150. + +config VIDEO_TVP7002 + tristate "Texas Instruments TVP7002 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP7002 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp7002. + +config VIDEO_VPX3220 + tristate "vpx3220a, vpx3216b & vpx3214c video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for VPX322x video decoders. + + To compile this driver as a module, choose M here: the + module will be called vpx3220. + +comment "Video and audio decoders" + +config VIDEO_SAA717X + tristate "Philips SAA7171/3/4 audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7171/3/4 audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa717x. + +source "drivers/media/i2c/cx25840/Kconfig" + +comment "MPEG video encoders" + +config VIDEO_CX2341X + tristate "Conexant CX2341x MPEG encoders" + depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON + ---help--- + Support for the Conexant CX23416 MPEG encoders + and CX23415 MPEG encoder/decoders. + + This module currently supports the encoding functions only. + + To compile this driver as a module, choose M here: the + module will be called cx2341x. + +comment "Video encoders" + +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7127/9 digital video encoders. + + To compile this driver as a module, choose M here: the + module will be called saa7127. + +config VIDEO_SAA7185 + tristate "Philips SAA7185 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Philips SAA7185 video encoder. + + To compile this driver as a module, choose M here: the + module will be called saa7185. + +config VIDEO_ADV7170 + tristate "Analog Devices ADV7170 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7170 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7170. + +config VIDEO_ADV7175 + tristate "Analog Devices ADV7175 video encoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Analog Devices ADV7175 video encoder driver + + To compile this driver as a module, choose M here: the + module will be called adv7175. + +config VIDEO_ADV7343 + tristate "ADV7343 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7343 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7343. + +config VIDEO_ADV7393 + tristate "ADV7393 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based ADV7393 encoder. + + To compile this driver as a module, choose M here: the + module will be called adv7393. + +config VIDEO_AK881X + tristate "AK8813/AK8814 video encoders" + depends on I2C + help + Video output driver for AKM AK8813 and AK8814 TV encoders + +comment "Camera sensor devices" + +config VIDEO_APTINA_PLL + tristate + +config VIDEO_SMIAPP_PLL + tristate + +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + +config VIDEO_VS6624 + tristate "ST VS6624 sensor support" + depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the ST VS6624 + camera. + + To compile this driver as a module, choose M here: the + module will be called vs6624. + +config VIDEO_MT9M032 + tristate "MT9M032 camera sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This driver supports MT9M032 camera sensors from Aptina, monochrome + models only. + +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_APTINA_PLL + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + +config VIDEO_MT9T001 + tristate "Aptina MT9T001 support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt0t001 3 Mpixel camera. + +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + +config VIDEO_MT9V032 + tristate "Micron MT9V032 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + MT9V032 752x480 CMOS sensor. + +config VIDEO_TCM825X + tristate "TCM825x camera sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the Toshiba TCM825x VGA camera sensor. + It is used for example in Nokia N800. + +config VIDEO_SR030PC30 + tristate "Siliconfile SR030PC30 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports SR030PC30 VGA camera from Siliconfile + +config VIDEO_NOON010PC30 + tristate "Siliconfile NOON010PC30 sensor support" + depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports NOON010PC30 CIF camera from Siliconfile + +source "drivers/media/i2c/m5mols/Kconfig" + +config VIDEO_S5K6AA + tristate "Samsung S5K6AAFX sensor support" + depends on MEDIA_CAMERA_SUPPORT + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M + camera sensor with an embedded SoC image signal processor. + +source "drivers/media/i2c/smiapp/Kconfig" + +comment "Flash devices" + +config VIDEO_ADP1653 + tristate "ADP1653 flash support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the ADP1653 flash controller. It is used for + example in Nokia N900. + +config VIDEO_AS3645A + tristate "AS3645A flash driver support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a driver for the AS3645A and LM3555 flash controllers. It has + build in control for flash, torch and indicator LEDs. + +comment "Video improvement chips" + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. + +comment "Miscelaneous helper chips" + +config VIDEO_THS7303 + tristate "THS7303 Video Amplifier" + depends on I2C + help + Support for TI THS7303 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. + +endmenu +endif diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile new file mode 100644 index 000000000000..93e8c1439596 --- /dev/null +++ b/drivers/media/i2c/Makefile @@ -0,0 +1,63 @@ +msp3400-objs := msp3400-driver.o msp3400-kthreads.o +obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o + +obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/ +obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ + +obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o +obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o +obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o +obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o +obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o +obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o +obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o +obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o +obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o +obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o +obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o +obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o +obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o +obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o +obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o +obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o +obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o +obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o +obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o +obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o +obj-$(CONFIG_VIDEO_VS6624) += vs6624.o +obj-$(CONFIG_VIDEO_BT819) += bt819.o +obj-$(CONFIG_VIDEO_BT856) += bt856.o +obj-$(CONFIG_VIDEO_BT866) += bt866.o +obj-$(CONFIG_VIDEO_KS0127) += ks0127.o +obj-$(CONFIG_VIDEO_THS7303) += ths7303.o +obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o +obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o +obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o +obj-$(CONFIG_VIDEO_CS5345) += cs5345.o +obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o +obj-$(CONFIG_VIDEO_M52790) += m52790.o +obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o +obj-$(CONFIG_VIDEO_WM8775) += wm8775.o +obj-$(CONFIG_VIDEO_WM8739) += wm8739.o +obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o +obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o +obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV7670) += ov7670.o +obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o +obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o +obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o +obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o +obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o +obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o +obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o +obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o +obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o +obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o +obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o +obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o +obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o +obj-$(CONFIG_VIDEO_AK881X) += ak881x.o +obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c new file mode 100644 index 000000000000..18a38b38fcb8 --- /dev/null +++ b/drivers/media/i2c/adp1653.c @@ -0,0 +1,487 @@ +/* + * drivers/media/i2c/adp1653.c + * + * Copyright (C) 2008--2011 Nokia Corporation + * + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * Contributors: + * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * Tuukka Toivonen <tuukkat76@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * TODO: + * - fault interrupt handling + * - hardware strobe + * - power doesn't need to be ON if all lights are off + * + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <media/adp1653.h> +#include <media/v4l2-device.h> + +#define TIMEOUT_MAX 820000 +#define TIMEOUT_STEP 54600 +#define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ + * TIMEOUT_STEP) +#define TIMEOUT_US_TO_CODE(t) ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \ + / TIMEOUT_STEP) +#define TIMEOUT_CODE_TO_US(c) (TIMEOUT_MAX - (c) * TIMEOUT_STEP) + +/* Write values into ADP1653 registers. */ +static int adp1653_update_hw(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + u8 out_sel; + u8 config = 0; + int rval; + + out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( + flash->indicator_intensity->val) + << ADP1653_REG_OUT_SEL_ILED_SHIFT; + + switch (flash->led_mode->val) { + case V4L2_FLASH_LED_MODE_NONE: + break; + case V4L2_FLASH_LED_MODE_FLASH: + /* Flash mode, light on with strobe, duration from timer */ + config = ADP1653_REG_CONFIG_TMR_CFG; + config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val) + << ADP1653_REG_CONFIG_TMR_SET_SHIFT; + break; + case V4L2_FLASH_LED_MODE_TORCH: + /* Torch mode, light immediately on, duration indefinite */ + out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( + flash->torch_intensity->val) + << ADP1653_REG_OUT_SEL_HPLED_SHIFT; + break; + } + + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); + if (rval < 0) + return rval; + + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config); + if (rval < 0) + return rval; + + return 0; +} + +static int adp1653_get_fault(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int fault; + int rval; + + fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT); + if (IS_ERR_VALUE(fault)) + return fault; + + flash->fault |= fault; + + if (!flash->fault) + return 0; + + /* Clear faults. */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); + if (IS_ERR_VALUE(rval)) + return rval; + + flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE; + + rval = adp1653_update_hw(flash); + if (IS_ERR_VALUE(rval)) + return rval; + + return flash->fault; +} + +static int adp1653_strobe(struct adp1653_flash *flash, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( + flash->indicator_intensity->val) + << ADP1653_REG_OUT_SEL_ILED_SHIFT; + int rval; + + if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + if (!enable) + return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, + out_sel); + + out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( + flash->flash_intensity->val) + << ADP1653_REG_OUT_SEL_HPLED_SHIFT; + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); + if (rval) + return rval; + + /* Software strobe using i2c */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, + ADP1653_REG_SW_STROBE_SW_STROBE); + if (rval) + return rval; + return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0); +} + +/* -------------------------------------------------------------------------- + * V4L2 controls + */ + +static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl) +{ + struct adp1653_flash *flash = + container_of(ctrl->handler, struct adp1653_flash, ctrls); + int rval; + + rval = adp1653_get_fault(flash); + if (IS_ERR_VALUE(rval)) + return rval; + + ctrl->cur.val = 0; + + if (flash->fault & ADP1653_REG_FAULT_FLT_SCP) + ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (flash->fault & ADP1653_REG_FAULT_FLT_OT) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (flash->fault & ADP1653_REG_FAULT_FLT_TMR) + ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; + if (flash->fault & ADP1653_REG_FAULT_FLT_OV) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; + + flash->fault = 0; + + return 0; +} + +static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct adp1653_flash *flash = + container_of(ctrl->handler, struct adp1653_flash, ctrls); + int rval; + + rval = adp1653_get_fault(flash); + if (IS_ERR_VALUE(rval)) + return rval; + if ((rval & (ADP1653_REG_FAULT_FLT_SCP | + ADP1653_REG_FAULT_FLT_OT | + ADP1653_REG_FAULT_FLT_OV)) && + (ctrl->id == V4L2_CID_FLASH_STROBE || + ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY || + ctrl->id == V4L2_CID_FLASH_LED_MODE)) + return -EBUSY; + + switch (ctrl->id) { + case V4L2_CID_FLASH_STROBE: + return adp1653_strobe(flash, 1); + case V4L2_CID_FLASH_STROBE_STOP: + return adp1653_strobe(flash, 0); + } + + return adp1653_update_hw(flash); +} + +static const struct v4l2_ctrl_ops adp1653_ctrl_ops = { + .g_volatile_ctrl = adp1653_get_ctrl, + .s_ctrl = adp1653_set_ctrl, +}; + +static int adp1653_init_controls(struct adp1653_flash *flash) +{ + struct v4l2_ctrl *fault; + + v4l2_ctrl_handler_init(&flash->ctrls, 9); + + flash->led_mode = + v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_LED_MODE, + V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0); + v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE_SOURCE, + V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0); + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + flash->flash_timeout = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN, + flash->platform_data->max_flash_timeout, + TIMEOUT_STEP, + flash->platform_data->max_flash_timeout); + flash->flash_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_INTENSITY, + ADP1653_FLASH_INTENSITY_MIN, + flash->platform_data->max_flash_intensity, + 1, flash->platform_data->max_flash_intensity); + flash->torch_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_TORCH_INTENSITY, + ADP1653_TORCH_INTENSITY_MIN, + flash->platform_data->max_torch_intensity, + ADP1653_FLASH_INTENSITY_STEP, + flash->platform_data->max_torch_intensity); + flash->indicator_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_INDICATOR_INTENSITY, + ADP1653_INDICATOR_INTENSITY_MIN, + flash->platform_data->max_indicator_intensity, + ADP1653_INDICATOR_INTENSITY_STEP, + ADP1653_INDICATOR_INTENSITY_MIN); + fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE + | V4L2_FLASH_FAULT_OVER_TEMPERATURE + | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); + + if (flash->ctrls.error) + return flash->ctrls.error; + + fault->flags |= V4L2_CTRL_FLAG_VOLATILE; + + flash->subdev.ctrl_handler = &flash->ctrls; + return 0; +} + +/* -------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static int +adp1653_init_device(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + /* Clear FAULT register by writing zero to OUT_SEL */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); + if (rval < 0) { + dev_err(&client->dev, "failed writing fault register\n"); + return -EIO; + } + + mutex_lock(flash->ctrls.lock); + /* Reset faults before reading new ones. */ + flash->fault = 0; + rval = adp1653_get_fault(flash); + mutex_unlock(flash->ctrls.lock); + if (rval > 0) { + dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval); + return -EIO; + } + + mutex_lock(flash->ctrls.lock); + rval = adp1653_update_hw(flash); + mutex_unlock(flash->ctrls.lock); + if (rval) { + dev_err(&client->dev, + "adp1653_update_hw failed at %s\n", __func__); + return -EIO; + } + + return 0; +} + +static int +__adp1653_set_power(struct adp1653_flash *flash, int on) +{ + int ret; + + ret = flash->platform_data->power(&flash->subdev, on); + if (ret < 0) + return ret; + + if (!on) + return 0; + + ret = adp1653_init_device(flash); + if (ret < 0) + flash->platform_data->power(&flash->subdev, 0); + + return ret; +} + +static int +adp1653_set_power(struct v4l2_subdev *subdev, int on) +{ + struct adp1653_flash *flash = to_adp1653_flash(subdev); + int ret = 0; + + mutex_lock(&flash->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (flash->power_count == !on) { + ret = __adp1653_set_power(flash, !!on); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + flash->power_count += on ? 1 : -1; + WARN_ON(flash->power_count < 0); + +done: + mutex_unlock(&flash->power_lock); + return ret; +} + +static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return adp1653_set_power(sd, 1); +} + +static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return adp1653_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops adp1653_core_ops = { + .s_power = adp1653_set_power, +}; + +static const struct v4l2_subdev_ops adp1653_ops = { + .core = &adp1653_core_ops, +}; + +static const struct v4l2_subdev_internal_ops adp1653_internal_ops = { + .open = adp1653_open, + .close = adp1653_close, +}; + +/* -------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int adp1653_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + if (!flash->power_count) + return 0; + + return __adp1653_set_power(flash, 0); +} + +static int adp1653_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + if (!flash->power_count) + return 0; + + return __adp1653_set_power(flash, 1); +} + +#else + +#define adp1653_suspend NULL +#define adp1653_resume NULL + +#endif /* CONFIG_PM */ + +static int adp1653_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct adp1653_flash *flash; + int ret; + + /* we couldn't work without platform data */ + if (client->dev.platform_data == NULL) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->platform_data = client->dev.platform_data; + + mutex_init(&flash->power_lock); + + v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops); + flash->subdev.internal_ops = &adp1653_internal_ops; + flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + ret = adp1653_init_controls(flash); + if (ret) + goto free_and_quit; + + ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + if (ret < 0) + goto free_and_quit; + + flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + + return 0; + +free_and_quit: + v4l2_ctrl_handler_free(&flash->ctrls); + kfree(flash); + return ret; +} + +static int __exit adp1653_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + v4l2_device_unregister_subdev(&flash->subdev); + v4l2_ctrl_handler_free(&flash->ctrls); + media_entity_cleanup(&flash->subdev.entity); + kfree(flash); + return 0; +} + +static const struct i2c_device_id adp1653_id_table[] = { + { ADP1653_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp1653_id_table); + +static struct dev_pm_ops adp1653_pm_ops = { + .suspend = adp1653_suspend, + .resume = adp1653_resume, +}; + +static struct i2c_driver adp1653_i2c_driver = { + .driver = { + .name = ADP1653_NAME, + .pm = &adp1653_pm_ops, + }, + .probe = adp1653_probe, + .remove = __exit_p(adp1653_remove), + .id_table = adp1653_id_table, +}; + +module_i2c_driver(adp1653_i2c_driver); + +MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); +MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/adv7170.c b/drivers/media/i2c/adv7170.c new file mode 100644 index 000000000000..6bc01fb98ff8 --- /dev/null +++ b/drivers/media/i2c/adv7170.c @@ -0,0 +1,410 @@ +/* + * adv7170 - adv7170, adv7171 video encoder driver version 0.0.1 + * + * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> + * + * Based on adv7176 driver by: + * + * Copyright (C) 1998 Dave Perks <dperks@ibm.net> + * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net> + * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + * - some corrections for Pinnacle Systems Inc. DC10plus card. + * + * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> + * - moved over to linux>=2.4.x i2c protocol (1/1/2003) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Analog Devices ADV7170 video encoder driver"); +MODULE_AUTHOR("Maxim Yevtyushkin"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* ----------------------------------------------------------------------- */ + +struct adv7170 { + struct v4l2_subdev sd; + unsigned char reg[128]; + + v4l2_std_id norm; + int input; +}; + +static inline struct adv7170 *to_adv7170(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7170, sd); +} + +static char *inputs[] = { "pass_through", "play_back" }; + +static enum v4l2_mbus_pixelcode adv7170_codes[] = { + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_UYVY8_1X16, +}; + +/* ----------------------------------------------------------------------- */ + +static inline int adv7170_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv7170 *encoder = to_adv7170(sd); + + encoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int adv7170_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int adv7170_write_block(struct v4l2_subdev *sd, + const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct adv7170 *encoder = to_adv7170(sd); + int ret = -1; + u8 reg; + + /* the adv7170 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = + encoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = adv7170_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + return ret; +} + +/* ----------------------------------------------------------------------- */ + +#define TR0MODE 0x4c +#define TR0RST 0x80 + +#define TR1CAPT 0x00 +#define TR1PLAY 0x00 + +static const unsigned char init_NTSC[] = { + 0x00, 0x10, /* MR0 */ + 0x01, 0x20, /* MR1 */ + 0x02, 0x0e, /* MR2 RTC control: bits 2 and 1 */ + 0x03, 0x80, /* MR3 */ + 0x04, 0x30, /* MR4 */ + 0x05, 0x00, /* Reserved */ + 0x06, 0x00, /* Reserved */ + 0x07, TR0MODE, /* TM0 */ + 0x08, TR1CAPT, /* TM1 */ + 0x09, 0x16, /* Fsc0 */ + 0x0a, 0x7c, /* Fsc1 */ + 0x0b, 0xf0, /* Fsc2 */ + 0x0c, 0x21, /* Fsc3 */ + 0x0d, 0x00, /* Subcarrier Phase */ + 0x0e, 0x00, /* Closed Capt. Ext 0 */ + 0x0f, 0x00, /* Closed Capt. Ext 1 */ + 0x10, 0x00, /* Closed Capt. 0 */ + 0x11, 0x00, /* Closed Capt. 1 */ + 0x12, 0x00, /* Pedestal Ctl 0 */ + 0x13, 0x00, /* Pedestal Ctl 1 */ + 0x14, 0x00, /* Pedestal Ctl 2 */ + 0x15, 0x00, /* Pedestal Ctl 3 */ + 0x16, 0x00, /* CGMS_WSS_0 */ + 0x17, 0x00, /* CGMS_WSS_1 */ + 0x18, 0x00, /* CGMS_WSS_2 */ + 0x19, 0x00, /* Teletext Ctl */ +}; + +static const unsigned char init_PAL[] = { + 0x00, 0x71, /* MR0 */ + 0x01, 0x20, /* MR1 */ + 0x02, 0x0e, /* MR2 RTC control: bits 2 and 1 */ + 0x03, 0x80, /* MR3 */ + 0x04, 0x30, /* MR4 */ + 0x05, 0x00, /* Reserved */ + 0x06, 0x00, /* Reserved */ + 0x07, TR0MODE, /* TM0 */ + 0x08, TR1CAPT, /* TM1 */ + 0x09, 0xcb, /* Fsc0 */ + 0x0a, 0x8a, /* Fsc1 */ + 0x0b, 0x09, /* Fsc2 */ + 0x0c, 0x2a, /* Fsc3 */ + 0x0d, 0x00, /* Subcarrier Phase */ + 0x0e, 0x00, /* Closed Capt. Ext 0 */ + 0x0f, 0x00, /* Closed Capt. Ext 1 */ + 0x10, 0x00, /* Closed Capt. 0 */ + 0x11, 0x00, /* Closed Capt. 1 */ + 0x12, 0x00, /* Pedestal Ctl 0 */ + 0x13, 0x00, /* Pedestal Ctl 1 */ + 0x14, 0x00, /* Pedestal Ctl 2 */ + 0x15, 0x00, /* Pedestal Ctl 3 */ + 0x16, 0x00, /* CGMS_WSS_0 */ + 0x17, 0x00, /* CGMS_WSS_1 */ + 0x18, 0x00, /* CGMS_WSS_2 */ + 0x19, 0x00, /* Teletext Ctl */ +}; + + +static int adv7170_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7170 *encoder = to_adv7170(sd); + + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + if (std & V4L2_STD_NTSC) { + adv7170_write_block(sd, init_NTSC, sizeof(init_NTSC)); + if (encoder->input == 0) + adv7170_write(sd, 0x02, 0x0e); /* Enable genlock */ + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + } else if (std & V4L2_STD_PAL) { + adv7170_write_block(sd, init_PAL, sizeof(init_PAL)); + if (encoder->input == 0) + adv7170_write(sd, 0x02, 0x0e); /* Enable genlock */ + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + } else { + v4l2_dbg(1, debug, sd, "illegal norm: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std); + encoder->norm = std; + return 0; +} + +static int adv7170_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7170 *encoder = to_adv7170(sd); + + /* RJ: input = 0: input is from decoder + input = 1: input is from ZR36060 + input = 2: color bar */ + + v4l2_dbg(1, debug, sd, "set input from %s\n", + input == 0 ? "decoder" : "ZR36060"); + + switch (input) { + case 0: + adv7170_write(sd, 0x01, 0x20); + adv7170_write(sd, 0x08, TR1CAPT); /* TR1 */ + adv7170_write(sd, 0x02, 0x0e); /* Enable genlock */ + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + case 1: + adv7170_write(sd, 0x01, 0x00); + adv7170_write(sd, 0x08, TR1PLAY); /* TR1 */ + adv7170_write(sd, 0x02, 0x08); + adv7170_write(sd, 0x07, TR0MODE | TR0RST); + adv7170_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + default: + v4l2_dbg(1, debug, sd, "illegal input: %d\n", input); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); + encoder->input = input; + return 0; +} + +static int adv7170_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(adv7170_codes)) + return -EINVAL; + + *code = adv7170_codes[index]; + return 0; +} + +static int adv7170_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7170_read(sd, 0x7); + + if ((val & 0x40) == (1 << 6)) + mf->code = V4L2_MBUS_FMT_UYVY8_1X16; + else + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + mf->width = 0; + mf->height = 0; + mf->field = V4L2_FIELD_ANY; + + return 0; +} + +static int adv7170_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7170_read(sd, 0x7); + int ret; + + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + val &= ~0x40; + break; + + case V4L2_MBUS_FMT_UYVY8_1X16: + val |= 0x40; + break; + + default: + v4l2_dbg(1, debug, sd, + "illegal v4l2_mbus_framefmt code: %d\n", mf->code); + return -EINVAL; + } + + ret = adv7170_write(sd, 0x7, val); + + return ret; +} + +static int adv7170_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7170, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops adv7170_core_ops = { + .g_chip_ident = adv7170_g_chip_ident, +}; + +static const struct v4l2_subdev_video_ops adv7170_video_ops = { + .s_std_output = adv7170_s_std_output, + .s_routing = adv7170_s_routing, + .s_mbus_fmt = adv7170_s_fmt, + .g_mbus_fmt = adv7170_g_fmt, + .enum_mbus_fmt = adv7170_enum_fmt, +}; + +static const struct v4l2_subdev_ops adv7170_ops = { + .core = &adv7170_core_ops, + .video = &adv7170_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int adv7170_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7170 *encoder; + struct v4l2_subdev *sd; + int i; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct adv7170), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7170_ops); + encoder->norm = V4L2_STD_NTSC; + encoder->input = 0; + + i = adv7170_write_block(sd, init_NTSC, sizeof(init_NTSC)); + if (i >= 0) { + i = adv7170_write(sd, 0x07, TR0MODE | TR0RST); + i = adv7170_write(sd, 0x07, TR0MODE); + i = adv7170_read(sd, 0x12); + v4l2_dbg(1, debug, sd, "revision %d\n", i & 1); + } + if (i < 0) + v4l2_dbg(1, debug, sd, "init error 0x%x\n", i); + return 0; +} + +static int adv7170_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_adv7170(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id adv7170_id[] = { + { "adv7170", 0 }, + { "adv7171", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7170_id); + +static struct i2c_driver adv7170_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7170", + }, + .probe = adv7170_probe, + .remove = adv7170_remove, + .id_table = adv7170_id, +}; + +module_i2c_driver(adv7170_driver); diff --git a/drivers/media/i2c/adv7175.c b/drivers/media/i2c/adv7175.c new file mode 100644 index 000000000000..c7640fab5730 --- /dev/null +++ b/drivers/media/i2c/adv7175.c @@ -0,0 +1,460 @@ +/* + * adv7175 - adv7175a video encoder driver version 0.0.3 + * + * Copyright (C) 1998 Dave Perks <dperks@ibm.net> + * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net> + * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + * - some corrections for Pinnacle Systems Inc. DC10plus card. + * + * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> + * - moved over to linux>=2.4.x i2c protocol (9/9/2002) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver"); +MODULE_AUTHOR("Dave Perks"); +MODULE_LICENSE("GPL"); + +#define I2C_ADV7175 0xd4 +#define I2C_ADV7176 0x54 + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* ----------------------------------------------------------------------- */ + +struct adv7175 { + struct v4l2_subdev sd; + v4l2_std_id norm; + int input; +}; + +static inline struct adv7175 *to_adv7175(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7175, sd); +} + +static char *inputs[] = { "pass_through", "play_back", "color_bar" }; + +static enum v4l2_mbus_pixelcode adv7175_codes[] = { + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_UYVY8_1X16, +}; + +/* ----------------------------------------------------------------------- */ + +static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int adv7175_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int adv7175_write_block(struct v4l2_subdev *sd, + const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = -1; + u8 reg; + + /* the adv7175 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = data[1]; + reg++; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = adv7175_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + + return ret; +} + +static void set_subcarrier_freq(struct v4l2_subdev *sd, int pass_through) +{ + /* for some reason pass_through NTSC needs + * a different sub-carrier freq to remain stable. */ + if (pass_through) + adv7175_write(sd, 0x02, 0x00); + else + adv7175_write(sd, 0x02, 0x55); + + adv7175_write(sd, 0x03, 0x55); + adv7175_write(sd, 0x04, 0x55); + adv7175_write(sd, 0x05, 0x25); +} + +/* ----------------------------------------------------------------------- */ +/* Output filter: S-Video Composite */ + +#define MR050 0x11 /* 0x09 */ +#define MR060 0x14 /* 0x0c */ + +/* ----------------------------------------------------------------------- */ + +#define TR0MODE 0x46 +#define TR0RST 0x80 + +#define TR1CAPT 0x80 +#define TR1PLAY 0x00 + +static const unsigned char init_common[] = { + + 0x00, MR050, /* MR0, PAL enabled */ + 0x01, 0x00, /* MR1 */ + 0x02, 0x0c, /* subc. freq. */ + 0x03, 0x8c, /* subc. freq. */ + 0x04, 0x79, /* subc. freq. */ + 0x05, 0x26, /* subc. freq. */ + 0x06, 0x40, /* subc. phase */ + + 0x07, TR0MODE, /* TR0, 16bit */ + 0x08, 0x21, /* */ + 0x09, 0x00, /* */ + 0x0a, 0x00, /* */ + 0x0b, 0x00, /* */ + 0x0c, TR1CAPT, /* TR1 */ + 0x0d, 0x4f, /* MR2 */ + 0x0e, 0x00, /* */ + 0x0f, 0x00, /* */ + 0x10, 0x00, /* */ + 0x11, 0x00, /* */ +}; + +static const unsigned char init_pal[] = { + 0x00, MR050, /* MR0, PAL enabled */ + 0x01, 0x00, /* MR1 */ + 0x02, 0x0c, /* subc. freq. */ + 0x03, 0x8c, /* subc. freq. */ + 0x04, 0x79, /* subc. freq. */ + 0x05, 0x26, /* subc. freq. */ + 0x06, 0x40, /* subc. phase */ +}; + +static const unsigned char init_ntsc[] = { + 0x00, MR060, /* MR0, NTSC enabled */ + 0x01, 0x00, /* MR1 */ + 0x02, 0x55, /* subc. freq. */ + 0x03, 0x55, /* subc. freq. */ + 0x04, 0x55, /* subc. freq. */ + 0x05, 0x25, /* subc. freq. */ + 0x06, 0x1a, /* subc. phase */ +}; + +static int adv7175_init(struct v4l2_subdev *sd, u32 val) +{ + /* This is just for testing!!! */ + adv7175_write_block(sd, init_common, sizeof(init_common)); + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + return 0; +} + +static int adv7175_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7175 *encoder = to_adv7175(sd); + + if (std & V4L2_STD_NTSC) { + adv7175_write_block(sd, init_ntsc, sizeof(init_ntsc)); + if (encoder->input == 0) + adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + } else if (std & V4L2_STD_PAL) { + adv7175_write_block(sd, init_pal, sizeof(init_pal)); + if (encoder->input == 0) + adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + } else if (std & V4L2_STD_SECAM) { + /* This is an attempt to convert + * SECAM->PAL (typically it does not work + * due to genlock: when decoder is in SECAM + * and encoder in in PAL the subcarrier can + * not be syncronized with horizontal + * quency) */ + adv7175_write_block(sd, init_pal, sizeof(init_pal)); + if (encoder->input == 0) + adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + } else { + v4l2_dbg(1, debug, sd, "illegal norm: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std); + encoder->norm = std; + return 0; +} + +static int adv7175_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7175 *encoder = to_adv7175(sd); + + /* RJ: input = 0: input is from decoder + input = 1: input is from ZR36060 + input = 2: color bar */ + + switch (input) { + case 0: + adv7175_write(sd, 0x01, 0x00); + + if (encoder->norm & V4L2_STD_NTSC) + set_subcarrier_freq(sd, 1); + + adv7175_write(sd, 0x0c, TR1CAPT); /* TR1 */ + if (encoder->norm & V4L2_STD_SECAM) + adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ + else + adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + /*udelay(10);*/ + break; + + case 1: + adv7175_write(sd, 0x01, 0x00); + + if (encoder->norm & V4L2_STD_NTSC) + set_subcarrier_freq(sd, 0); + + adv7175_write(sd, 0x0c, TR1PLAY); /* TR1 */ + adv7175_write(sd, 0x0d, 0x49); + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + case 2: + adv7175_write(sd, 0x01, 0x80); + + if (encoder->norm & V4L2_STD_NTSC) + set_subcarrier_freq(sd, 0); + + adv7175_write(sd, 0x0d, 0x49); + adv7175_write(sd, 0x07, TR0MODE | TR0RST); + adv7175_write(sd, 0x07, TR0MODE); + /* udelay(10); */ + break; + + default: + v4l2_dbg(1, debug, sd, "illegal input: %d\n", input); + return -EINVAL; + } + v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); + encoder->input = input; + return 0; +} + +static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(adv7175_codes)) + return -EINVAL; + + *code = adv7175_codes[index]; + return 0; +} + +static int adv7175_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7175_read(sd, 0x7); + + if ((val & 0x40) == (1 << 6)) + mf->code = V4L2_MBUS_FMT_UYVY8_1X16; + else + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + mf->width = 0; + mf->height = 0; + mf->field = V4L2_FIELD_ANY; + + return 0; +} + +static int adv7175_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7175_read(sd, 0x7); + int ret; + + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + val &= ~0x40; + break; + + case V4L2_MBUS_FMT_UYVY8_1X16: + val |= 0x40; + break; + + default: + v4l2_dbg(1, debug, sd, + "illegal v4l2_mbus_framefmt code: %d\n", mf->code); + return -EINVAL; + } + + ret = adv7175_write(sd, 0x7, val); + + return ret; +} + +static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7175, 0); +} + +static int adv7175_s_power(struct v4l2_subdev *sd, int on) +{ + if (on) + adv7175_write(sd, 0x01, 0x00); + else + adv7175_write(sd, 0x01, 0x78); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops adv7175_core_ops = { + .g_chip_ident = adv7175_g_chip_ident, + .init = adv7175_init, + .s_power = adv7175_s_power, +}; + +static const struct v4l2_subdev_video_ops adv7175_video_ops = { + .s_std_output = adv7175_s_std_output, + .s_routing = adv7175_s_routing, + .s_mbus_fmt = adv7175_s_fmt, + .g_mbus_fmt = adv7175_g_fmt, + .enum_mbus_fmt = adv7175_enum_fmt, +}; + +static const struct v4l2_subdev_ops adv7175_ops = { + .core = &adv7175_core_ops, + .video = &adv7175_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int adv7175_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i; + struct adv7175 *encoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7175_ops); + encoder->norm = V4L2_STD_NTSC; + encoder->input = 0; + + i = adv7175_write_block(sd, init_common, sizeof(init_common)); + if (i >= 0) { + i = adv7175_write(sd, 0x07, TR0MODE | TR0RST); + i = adv7175_write(sd, 0x07, TR0MODE); + i = adv7175_read(sd, 0x12); + v4l2_dbg(1, debug, sd, "revision %d\n", i & 1); + } + if (i < 0) + v4l2_dbg(1, debug, sd, "init error 0x%x\n", i); + return 0; +} + +static int adv7175_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_adv7175(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id adv7175_id[] = { + { "adv7175", 0 }, + { "adv7176", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7175_id); + +static struct i2c_driver adv7175_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7175", + }, + .probe = adv7175_probe, + .remove = adv7175_remove, + .id_table = adv7175_id, +}; + +module_i2c_driver(adv7175_driver); diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c new file mode 100644 index 000000000000..45ecf8db1eae --- /dev/null +++ b/drivers/media/i2c/adv7180.c @@ -0,0 +1,667 @@ +/* + * adv7180.c Analog Devices ADV7180 video decoder driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <media/v4l2-ioctl.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-chip-ident.h> +#include <linux/mutex.h> + +#define ADV7180_INPUT_CONTROL_REG 0x00 +#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00 +#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10 +#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM 0x20 +#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_M_SECAM 0x30 +#define ADV7180_INPUT_CONTROL_NTSC_J 0x40 +#define ADV7180_INPUT_CONTROL_NTSC_M 0x50 +#define ADV7180_INPUT_CONTROL_PAL60 0x60 +#define ADV7180_INPUT_CONTROL_NTSC_443 0x70 +#define ADV7180_INPUT_CONTROL_PAL_BG 0x80 +#define ADV7180_INPUT_CONTROL_PAL_N 0x90 +#define ADV7180_INPUT_CONTROL_PAL_M 0xa0 +#define ADV7180_INPUT_CONTROL_PAL_M_PED 0xb0 +#define ADV7180_INPUT_CONTROL_PAL_COMB_N 0xc0 +#define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED 0xd0 +#define ADV7180_INPUT_CONTROL_PAL_SECAM 0xe0 +#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED 0xf0 +#define ADV7180_INPUT_CONTROL_INSEL_MASK 0x0f + +#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG 0x04 +#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS 0xC5 + +#define ADV7180_AUTODETECT_ENABLE_REG 0x07 +#define ADV7180_AUTODETECT_DEFAULT 0x7f +/* Contrast */ +#define ADV7180_CON_REG 0x08 /*Unsigned */ +#define ADV7180_CON_MIN 0 +#define ADV7180_CON_DEF 128 +#define ADV7180_CON_MAX 255 +/* Brightness*/ +#define ADV7180_BRI_REG 0x0a /*Signed */ +#define ADV7180_BRI_MIN -128 +#define ADV7180_BRI_DEF 0 +#define ADV7180_BRI_MAX 127 +/* Hue */ +#define ADV7180_HUE_REG 0x0b /*Signed, inverted */ +#define ADV7180_HUE_MIN -127 +#define ADV7180_HUE_DEF 0 +#define ADV7180_HUE_MAX 128 + +#define ADV7180_ADI_CTRL_REG 0x0e +#define ADV7180_ADI_CTRL_IRQ_SPACE 0x20 + +#define ADV7180_PWR_MAN_REG 0x0f +#define ADV7180_PWR_MAN_ON 0x04 +#define ADV7180_PWR_MAN_OFF 0x24 +#define ADV7180_PWR_MAN_RES 0x80 + +#define ADV7180_STATUS1_REG 0x10 +#define ADV7180_STATUS1_IN_LOCK 0x01 +#define ADV7180_STATUS1_AUTOD_MASK 0x70 +#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00 +#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10 +#define ADV7180_STATUS1_AUTOD_PAL_M 0x20 +#define ADV7180_STATUS1_AUTOD_PAL_60 0x30 +#define ADV7180_STATUS1_AUTOD_PAL_B_G 0x40 +#define ADV7180_STATUS1_AUTOD_SECAM 0x50 +#define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60 +#define ADV7180_STATUS1_AUTOD_SECAM_525 0x70 + +#define ADV7180_IDENT_REG 0x11 +#define ADV7180_ID_7180 0x18 + +#define ADV7180_ICONF1_ADI 0x40 +#define ADV7180_ICONF1_ACTIVE_LOW 0x01 +#define ADV7180_ICONF1_PSYNC_ONLY 0x10 +#define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0 +/* Saturation */ +#define ADV7180_SD_SAT_CB_REG 0xe3 /*Unsigned */ +#define ADV7180_SD_SAT_CR_REG 0xe4 /*Unsigned */ +#define ADV7180_SAT_MIN 0 +#define ADV7180_SAT_DEF 128 +#define ADV7180_SAT_MAX 255 + +#define ADV7180_IRQ1_LOCK 0x01 +#define ADV7180_IRQ1_UNLOCK 0x02 +#define ADV7180_ISR1_ADI 0x42 +#define ADV7180_ICR1_ADI 0x43 +#define ADV7180_IMR1_ADI 0x44 +#define ADV7180_IMR2_ADI 0x48 +#define ADV7180_IRQ3_AD_CHANGE 0x08 +#define ADV7180_ISR3_ADI 0x4A +#define ADV7180_ICR3_ADI 0x4B +#define ADV7180_IMR3_ADI 0x4C +#define ADV7180_IMR4_ADI 0x50 + +#define ADV7180_NTSC_V_BIT_END_REG 0xE6 +#define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND 0x4F + +struct adv7180_state { + struct v4l2_ctrl_handler ctrl_hdl; + struct v4l2_subdev sd; + struct work_struct work; + struct mutex mutex; /* mutual excl. when accessing chip */ + int irq; + v4l2_std_id curr_norm; + bool autodetect; + u8 input; +}; +#define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler, \ + struct adv7180_state, \ + ctrl_hdl)->sd) + +static v4l2_std_id adv7180_std_to_v4l2(u8 status1) +{ + switch (status1 & ADV7180_STATUS1_AUTOD_MASK) { + case ADV7180_STATUS1_AUTOD_NTSM_M_J: + return V4L2_STD_NTSC; + case ADV7180_STATUS1_AUTOD_NTSC_4_43: + return V4L2_STD_NTSC_443; + case ADV7180_STATUS1_AUTOD_PAL_M: + return V4L2_STD_PAL_M; + case ADV7180_STATUS1_AUTOD_PAL_60: + return V4L2_STD_PAL_60; + case ADV7180_STATUS1_AUTOD_PAL_B_G: + return V4L2_STD_PAL; + case ADV7180_STATUS1_AUTOD_SECAM: + return V4L2_STD_SECAM; + case ADV7180_STATUS1_AUTOD_PAL_COMB: + return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N; + case ADV7180_STATUS1_AUTOD_SECAM_525: + return V4L2_STD_SECAM; + default: + return V4L2_STD_UNKNOWN; + } +} + +static int v4l2_std_to_adv7180(v4l2_std_id std) +{ + if (std == V4L2_STD_PAL_60) + return ADV7180_INPUT_CONTROL_PAL60; + if (std == V4L2_STD_NTSC_443) + return ADV7180_INPUT_CONTROL_NTSC_443; + if (std == V4L2_STD_PAL_N) + return ADV7180_INPUT_CONTROL_PAL_N; + if (std == V4L2_STD_PAL_M) + return ADV7180_INPUT_CONTROL_PAL_M; + if (std == V4L2_STD_PAL_Nc) + return ADV7180_INPUT_CONTROL_PAL_COMB_N; + + if (std & V4L2_STD_PAL) + return ADV7180_INPUT_CONTROL_PAL_BG; + if (std & V4L2_STD_NTSC) + return ADV7180_INPUT_CONTROL_NTSC_M; + if (std & V4L2_STD_SECAM) + return ADV7180_INPUT_CONTROL_PAL_SECAM; + + return -EINVAL; +} + +static u32 adv7180_status_to_v4l2(u8 status1) +{ + if (!(status1 & ADV7180_STATUS1_IN_LOCK)) + return V4L2_IN_ST_NO_SIGNAL; + + return 0; +} + +static int __adv7180_status(struct i2c_client *client, u32 *status, + v4l2_std_id *std) +{ + int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG); + + if (status1 < 0) + return status1; + + if (status) + *status = adv7180_status_to_v4l2(status1); + if (std) + *std = adv7180_std_to_v4l2(status1); + + return 0; +} + +static inline struct adv7180_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7180_state, sd); +} + +static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7180_state *state = to_state(sd); + int err = mutex_lock_interruptible(&state->mutex); + if (err) + return err; + + /* when we are interrupt driven we know the state */ + if (!state->autodetect || state->irq > 0) + *std = state->curr_norm; + else + err = __adv7180_status(v4l2_get_subdevdata(sd), NULL, std); + + mutex_unlock(&state->mutex); + return err; +} + +static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input, + u32 output, u32 config) +{ + struct adv7180_state *state = to_state(sd); + int ret = mutex_lock_interruptible(&state->mutex); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (ret) + return ret; + + /* We cannot discriminate between LQFP and 40-pin LFCSP, so accept + * all inputs and let the card driver take care of validation + */ + if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input) + goto out; + + ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG); + + if (ret < 0) + goto out; + + ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK; + ret = i2c_smbus_write_byte_data(client, + ADV7180_INPUT_CONTROL_REG, ret | input); + state->input = input; +out: + mutex_unlock(&state->mutex); + return ret; +} + +static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct adv7180_state *state = to_state(sd); + int ret = mutex_lock_interruptible(&state->mutex); + if (ret) + return ret; + + ret = __adv7180_status(v4l2_get_subdevdata(sd), status, NULL); + mutex_unlock(&state->mutex); + return ret; +} + +static int adv7180_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0); +} + +static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7180_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = mutex_lock_interruptible(&state->mutex); + if (ret) + return ret; + + /* all standards -> autodetect */ + if (std == V4L2_STD_ALL) { + ret = + i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, + ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM + | state->input); + if (ret < 0) + goto out; + + __adv7180_status(client, NULL, &state->curr_norm); + state->autodetect = true; + } else { + ret = v4l2_std_to_adv7180(std); + if (ret < 0) + goto out; + + ret = i2c_smbus_write_byte_data(client, + ADV7180_INPUT_CONTROL_REG, + ret | state->input); + if (ret < 0) + goto out; + + state->curr_norm = std; + state->autodetect = false; + } + ret = 0; +out: + mutex_unlock(&state->mutex); + return ret; +} + +static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_adv7180_sd(ctrl); + struct adv7180_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = mutex_lock_interruptible(&state->mutex); + int val; + + if (ret) + return ret; + val = ctrl->val; + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val); + break; + case V4L2_CID_HUE: + /*Hue is inverted according to HSL chart */ + ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val); + break; + case V4L2_CID_CONTRAST: + ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val); + break; + case V4L2_CID_SATURATION: + /* + *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE + *Let's not confuse the user, everybody understands saturation + */ + ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG, + val); + if (ret < 0) + break; + ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG, + val); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&state->mutex); + return ret; +} + +static const struct v4l2_ctrl_ops adv7180_ctrl_ops = { + .s_ctrl = adv7180_s_ctrl, +}; + +static int adv7180_init_controls(struct adv7180_state *state) +{ + v4l2_ctrl_handler_init(&state->ctrl_hdl, 4); + + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN, + ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF); + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_CONTRAST, ADV7180_CON_MIN, + ADV7180_CON_MAX, 1, ADV7180_CON_DEF); + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_SATURATION, ADV7180_SAT_MIN, + ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF); + v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops, + V4L2_CID_HUE, ADV7180_HUE_MIN, + ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF); + state->sd.ctrl_handler = &state->ctrl_hdl; + if (state->ctrl_hdl.error) { + int err = state->ctrl_hdl.error; + + v4l2_ctrl_handler_free(&state->ctrl_hdl); + return err; + } + v4l2_ctrl_handler_setup(&state->ctrl_hdl); + + return 0; +} +static void adv7180_exit_controls(struct adv7180_state *state) +{ + v4l2_ctrl_handler_free(&state->ctrl_hdl); +} + +static const struct v4l2_subdev_video_ops adv7180_video_ops = { + .querystd = adv7180_querystd, + .g_input_status = adv7180_g_input_status, + .s_routing = adv7180_s_routing, +}; + +static const struct v4l2_subdev_core_ops adv7180_core_ops = { + .g_chip_ident = adv7180_g_chip_ident, + .s_std = adv7180_s_std, + .queryctrl = v4l2_subdev_queryctrl, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, +}; + +static const struct v4l2_subdev_ops adv7180_ops = { + .core = &adv7180_core_ops, + .video = &adv7180_video_ops, +}; + +static void adv7180_work(struct work_struct *work) +{ + struct adv7180_state *state = container_of(work, struct adv7180_state, + work); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + u8 isr3; + + mutex_lock(&state->mutex); + i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, + ADV7180_ADI_CTRL_IRQ_SPACE); + isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI); + /* clear */ + i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3); + i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0); + + if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect) + __adv7180_status(client, NULL, &state->curr_norm); + mutex_unlock(&state->mutex); + + enable_irq(state->irq); +} + +static irqreturn_t adv7180_irq(int irq, void *devid) +{ + struct adv7180_state *state = devid; + + schedule_work(&state->work); + + disable_irq_nosync(state->irq); + + return IRQ_HANDLED; +} + +static int init_device(struct i2c_client *client, struct adv7180_state *state) +{ + int ret; + + /* Initialize adv7180 */ + /* Enable autodetection */ + if (state->autodetect) { + ret = + i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, + ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM + | state->input); + if (ret < 0) + return ret; + + ret = + i2c_smbus_write_byte_data(client, + ADV7180_AUTODETECT_ENABLE_REG, + ADV7180_AUTODETECT_DEFAULT); + if (ret < 0) + return ret; + } else { + ret = v4l2_std_to_adv7180(state->curr_norm); + if (ret < 0) + return ret; + + ret = + i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG, + ret | state->input); + if (ret < 0) + return ret; + + } + /* ITU-R BT.656-4 compatible */ + ret = i2c_smbus_write_byte_data(client, + ADV7180_EXTENDED_OUTPUT_CONTROL_REG, + ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS); + if (ret < 0) + return ret; + + /* Manually set V bit end position in NTSC mode */ + ret = i2c_smbus_write_byte_data(client, + ADV7180_NTSC_V_BIT_END_REG, + ADV7180_NTSC_V_BIT_END_MANUAL_NVEND); + if (ret < 0) + return ret; + + /* read current norm */ + __adv7180_status(client, NULL, &state->curr_norm); + + /* register for interrupts */ + if (state->irq > 0) { + ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME, + state); + if (ret) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, + ADV7180_ADI_CTRL_IRQ_SPACE); + if (ret < 0) + return ret; + + /* config the Interrupt pin to be active low */ + ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI, + ADV7180_ICONF1_ACTIVE_LOW | + ADV7180_ICONF1_PSYNC_ONLY); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0); + if (ret < 0) + return ret; + + /* enable AD change interrupts interrupts */ + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI, + ADV7180_IRQ3_AD_CHANGE); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, + 0); + if (ret < 0) + return ret; + } + + return 0; +} + +static __devinit int adv7180_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7180_state *state; + struct v4l2_subdev *sd; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr, client->adapter->name); + + state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL); + if (state == NULL) { + ret = -ENOMEM; + goto err; + } + + state->irq = client->irq; + INIT_WORK(&state->work, adv7180_work); + mutex_init(&state->mutex); + state->autodetect = true; + state->input = 0; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &adv7180_ops); + + ret = adv7180_init_controls(state); + if (ret) + goto err_unreg_subdev; + ret = init_device(client, state); + if (ret) + goto err_free_ctrl; + return 0; + +err_free_ctrl: + adv7180_exit_controls(state); +err_unreg_subdev: + mutex_destroy(&state->mutex); + v4l2_device_unregister_subdev(sd); + kfree(state); +err: + printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret); + return ret; +} + +static __devexit int adv7180_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7180_state *state = to_state(sd); + + if (state->irq > 0) { + free_irq(client->irq, state); + if (cancel_work_sync(&state->work)) { + /* + * Work was pending, therefore we need to enable + * IRQ here to balance the disable_irq() done in the + * interrupt handler. + */ + enable_irq(state->irq); + } + } + + mutex_destroy(&state->mutex); + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id adv7180_id[] = { + {KBUILD_MODNAME, 0}, + {}, +}; + +#ifdef CONFIG_PM +static int adv7180_suspend(struct i2c_client *client, pm_message_t state) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, + ADV7180_PWR_MAN_OFF); + if (ret < 0) + return ret; + return 0; +} + +static int adv7180_resume(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7180_state *state = to_state(sd); + int ret; + + ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, + ADV7180_PWR_MAN_ON); + if (ret < 0) + return ret; + ret = init_device(client, state); + if (ret < 0) + return ret; + return 0; +} +#endif + +MODULE_DEVICE_TABLE(i2c, adv7180_id); + +static struct i2c_driver adv7180_driver = { + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + }, + .probe = adv7180_probe, + .remove = __devexit_p(adv7180_remove), +#ifdef CONFIG_PM + .suspend = adv7180_suspend, + .resume = adv7180_resume, +#endif + .id_table = adv7180_id, +}; + +module_i2c_driver(adv7180_driver); + +MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver"); +MODULE_AUTHOR("Mocean Laboratories"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/adv7183.c b/drivers/media/i2c/adv7183.c new file mode 100644 index 000000000000..e1d4c89d7140 --- /dev/null +++ b/drivers/media/i2c/adv7183.c @@ -0,0 +1,699 @@ +/* + * adv7183.c Analog Devices ADV7183 video decoder driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/adv7183.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> + +#include "adv7183_regs.h" + +struct adv7183 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + + v4l2_std_id std; /* Current set standard */ + u32 input; + u32 output; + unsigned reset_pin; + unsigned oe_pin; + struct v4l2_mbus_framefmt fmt; +}; + +/* EXAMPLES USING 27 MHz CLOCK + * Mode 1 CVBS Input (Composite Video on AIN5) + * All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8. + */ +static const unsigned char adv7183_init_regs[] = { + ADV7183_IN_CTRL, 0x04, /* CVBS input on AIN5 */ + ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */ + ADV7183_SHAP_FILT_CTRL, 0x41, /* Set CSFM to SH1 */ + ADV7183_ADC_CTRL, 0x16, /* Power down ADC 1 and ADC 2 */ + ADV7183_CTI_DNR_CTRL_4, 0x04, /* Set DNR threshold to 4 for flat response */ + /* ADI recommended programming sequence */ + ADV7183_ADI_CTRL, 0x80, + ADV7183_CTI_DNR_CTRL_4, 0x20, + 0x52, 0x18, + 0x58, 0xED, + 0x77, 0xC5, + 0x7C, 0x93, + 0x7D, 0x00, + 0xD0, 0x48, + 0xD5, 0xA0, + 0xD7, 0xEA, + ADV7183_SD_SATURATION_CR, 0x3E, + ADV7183_PAL_V_END, 0x3E, + ADV7183_PAL_F_TOGGLE, 0x0F, + ADV7183_ADI_CTRL, 0x00, +}; + +static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7183, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7183, hdl)->sd; +} + +static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int adv7183_writeregs(struct v4l2_subdev *sd, + const unsigned char *regs, unsigned int num) +{ + unsigned char reg, data; + unsigned int cnt = 0; + + if (num & 0x1) { + v4l2_err(sd, "invalid regs array\n"); + return -1; + } + + while (cnt < num) { + reg = *regs++; + data = *regs++; + cnt += 2; + + adv7183_write(sd, reg, data); + } + return 0; +} + +static int adv7183_log_status(struct v4l2_subdev *sd) +{ + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_info(sd, "adv7183: Input control = 0x%02x\n", + adv7183_read(sd, ADV7183_IN_CTRL)); + v4l2_info(sd, "adv7183: Video selection = 0x%02x\n", + adv7183_read(sd, ADV7183_VD_SEL)); + v4l2_info(sd, "adv7183: Output control = 0x%02x\n", + adv7183_read(sd, ADV7183_OUT_CTRL)); + v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n", + adv7183_read(sd, ADV7183_EXT_OUT_CTRL)); + v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n", + adv7183_read(sd, ADV7183_AUTO_DET_EN)); + v4l2_info(sd, "adv7183: Contrast = 0x%02x\n", + adv7183_read(sd, ADV7183_CONTRAST)); + v4l2_info(sd, "adv7183: Brightness = 0x%02x\n", + adv7183_read(sd, ADV7183_BRIGHTNESS)); + v4l2_info(sd, "adv7183: Hue = 0x%02x\n", + adv7183_read(sd, ADV7183_HUE)); + v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_Y)); + v4l2_info(sd, "adv7183: Default value C = 0x%02x\n", + adv7183_read(sd, ADV7183_DEF_C)); + v4l2_info(sd, "adv7183: ADI control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL)); + v4l2_info(sd, "adv7183: Power Management = 0x%02x\n", + adv7183_read(sd, ADV7183_POW_MANAGE)); + v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_STATUS_1), + adv7183_read(sd, ADV7183_STATUS_2), + adv7183_read(sd, ADV7183_STATUS_3)); + v4l2_info(sd, "adv7183: Ident = 0x%02x\n", + adv7183_read(sd, ADV7183_IDENT)); + v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n", + adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL)); + v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n", + adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1)); + v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL), + adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2)); + v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n", + adv7183_read(sd, ADV7183_COMB_FILT_CTRL)); + v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n", + adv7183_read(sd, ADV7183_ADI_CTRL_2)); + v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n", + adv7183_read(sd, ADV7183_PIX_DELAY_CTRL)); + v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n", + adv7183_read(sd, ADV7183_MISC_GAIN_CTRL)); + v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n", + adv7183_read(sd, ADV7183_AGC_MODE_CTRL)); + v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1), + adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2)); + v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2), + adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3)); + v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_HS_POS_CTRL_1), + adv7183_read(sd, ADV7183_HS_POS_CTRL_2), + adv7183_read(sd, ADV7183_HS_POS_CTRL_3)); + v4l2_info(sd, "adv7183: Polarity = 0x%02x\n", + adv7183_read(sd, ADV7183_POLARITY)); + v4l2_info(sd, "adv7183: ADC control = 0x%02x\n", + adv7183_read(sd, ADV7183_ADC_CTRL)); + v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_OFFSET_CB), + adv7183_read(sd, ADV7183_SD_OFFSET_CR)); + v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n", + adv7183_read(sd, ADV7183_SD_SATURATION_CB), + adv7183_read(sd, ADV7183_SD_SATURATION_CR)); + v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n", + adv7183_read(sd, ADV7183_DRIVE_STR)); + v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name); + return 0; +} + +static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *std = decoder->std; + return 0; +} + +static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + if (std == V4L2_STD_PAL_60) + reg |= 0x60; + else if (std == V4L2_STD_NTSC_443) + reg |= 0x70; + else if (std == V4L2_STD_PAL_N) + reg |= 0x90; + else if (std == V4L2_STD_PAL_M) + reg |= 0xA0; + else if (std == V4L2_STD_PAL_Nc) + reg |= 0xC0; + else if (std & V4L2_STD_PAL) + reg |= 0x80; + else if (std & V4L2_STD_NTSC) + reg |= 0x50; + else if (std & V4L2_STD_SECAM) + reg |= 0xE0; + else + return -EINVAL; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + decoder->std = std; + + return 0; +} + +static int adv7183_reset(struct v4l2_subdev *sd, u32 val) +{ + int reg; + + reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80; + adv7183_write(sd, ADV7183_POW_MANAGE, reg); + /* wait 5ms before any further i2c writes are performed */ + usleep_range(5000, 10000); + return 0; +} + +static int adv7183_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT)) + return -EINVAL; + + if (input != decoder->input) { + decoder->input = input; + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0; + switch (input) { + case ADV7183_COMPOSITE1: + reg |= 0x1; + break; + case ADV7183_COMPOSITE2: + reg |= 0x2; + break; + case ADV7183_COMPOSITE3: + reg |= 0x3; + break; + case ADV7183_COMPOSITE4: + reg |= 0x4; + break; + case ADV7183_COMPOSITE5: + reg |= 0x5; + break; + case ADV7183_COMPOSITE6: + reg |= 0xB; + break; + case ADV7183_COMPOSITE7: + reg |= 0xC; + break; + case ADV7183_COMPOSITE8: + reg |= 0xD; + break; + case ADV7183_COMPOSITE9: + reg |= 0xE; + break; + case ADV7183_COMPOSITE10: + reg |= 0xF; + break; + case ADV7183_SVIDEO0: + reg |= 0x6; + break; + case ADV7183_SVIDEO1: + reg |= 0x7; + break; + case ADV7183_SVIDEO2: + reg |= 0x8; + break; + case ADV7183_COMPONENT0: + reg |= 0x9; + break; + case ADV7183_COMPONENT1: + reg |= 0xA; + break; + default: + break; + } + adv7183_write(sd, ADV7183_IN_CTRL, reg); + } + + if (output != decoder->output) { + decoder->output = output; + reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0; + switch (output) { + case ADV7183_16BIT_OUT: + reg |= 0x9; + break; + default: + reg |= 0xC; + break; + } + adv7183_write(sd, ADV7183_OUT_CTRL, reg); + } + + return 0; +} + +static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + int val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (val < 0) + val = 127 - val; + adv7183_write(sd, ADV7183_BRIGHTNESS, val); + break; + case V4L2_CID_CONTRAST: + adv7183_write(sd, ADV7183_CONTRAST, val); + break; + case V4L2_CID_SATURATION: + adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF)); + break; + case V4L2_CID_HUE: + adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8); + adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct adv7183 *decoder = to_adv7183(sd); + int reg; + + /* enable autodetection block */ + reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF; + adv7183_write(sd, ADV7183_IN_CTRL, reg); + + /* wait autodetection switch */ + mdelay(10); + + /* get autodetection result */ + reg = adv7183_read(sd, ADV7183_STATUS_1); + switch ((reg >> 0x4) & 0x7) { + case 0: + *std = V4L2_STD_NTSC; + break; + case 1: + *std = V4L2_STD_NTSC_443; + break; + case 2: + *std = V4L2_STD_PAL_M; + break; + case 3: + *std = V4L2_STD_PAL_60; + break; + case 4: + *std = V4L2_STD_PAL; + break; + case 5: + *std = V4L2_STD_SECAM; + break; + case 6: + *std = V4L2_STD_PAL_Nc; + break; + case 7: + *std = V4L2_STD_SECAM; + break; + default: + *std = V4L2_STD_UNKNOWN; + break; + } + + /* after std detection, write back user set std */ + adv7183_s_std(sd, decoder->std); + return 0; +} + +static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + int reg; + + *status = V4L2_IN_ST_NO_SIGNAL; + reg = adv7183_read(sd, ADV7183_STATUS_1); + if (reg < 0) + return reg; + if (reg & 0x1) + *status = 0; + return 0; +} + +static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + fmt->code = V4L2_MBUS_FMT_UYVY8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + if (decoder->std & V4L2_STD_525_60) { + fmt->field = V4L2_FIELD_SEQ_TB; + fmt->width = 720; + fmt->height = 480; + } else { + fmt->field = V4L2_FIELD_SEQ_BT; + fmt->width = 720; + fmt->height = 576; + } + return 0; +} + +static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + adv7183_try_mbus_fmt(sd, fmt); + decoder->fmt = *fmt; + return 0; +} + +static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct adv7183 *decoder = to_adv7183(sd); + + *fmt = decoder->fmt; + return 0; +} + +static int adv7183_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct adv7183 *decoder = to_adv7183(sd); + + if (enable) + gpio_direction_output(decoder->oe_pin, 0); + else + gpio_direction_output(decoder->oe_pin, 1); + udelay(1); + return 0; +} + +static int adv7183_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* 0x11 for adv7183, 0x13 for adv7183b */ + rev = adv7183_read(sd, ADV7183_IDENT); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7183, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = adv7183_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int adv7183_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops adv7183_ctrl_ops = { + .s_ctrl = adv7183_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7183_core_ops = { + .log_status = adv7183_log_status, + .g_std = adv7183_g_std, + .s_std = adv7183_s_std, + .reset = adv7183_reset, + .g_chip_ident = adv7183_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7183_g_register, + .s_register = adv7183_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops adv7183_video_ops = { + .s_routing = adv7183_s_routing, + .querystd = adv7183_querystd, + .g_input_status = adv7183_g_input_status, + .enum_mbus_fmt = adv7183_enum_mbus_fmt, + .try_mbus_fmt = adv7183_try_mbus_fmt, + .s_mbus_fmt = adv7183_s_mbus_fmt, + .g_mbus_fmt = adv7183_g_mbus_fmt, + .s_stream = adv7183_s_stream, +}; + +static const struct v4l2_subdev_ops adv7183_ops = { + .core = &adv7183_core_ops, + .video = &adv7183_video_ops, +}; + +static int adv7183_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7183 *decoder; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int ret; + struct v4l2_mbus_framefmt fmt; + const unsigned *pin_array; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + pin_array = client->dev.platform_data; + if (pin_array == NULL) + return -EINVAL; + + decoder = kzalloc(sizeof(struct adv7183), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + + decoder->reset_pin = pin_array[0]; + decoder->oe_pin = pin_array[1]; + + if (gpio_request(decoder->reset_pin, "ADV7183 Reset")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin); + ret = -EBUSY; + goto err_free_decoder; + } + + if (gpio_request(decoder->oe_pin, "ADV7183 Output Enable")) { + v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin); + ret = -EBUSY; + goto err_free_reset; + } + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &adv7183_ops); + + hdl = &decoder->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080); + v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops, + V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + ret = hdl->error; + + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + /* v4l2 doesn't support an autodetect standard, pick PAL as default */ + decoder->std = V4L2_STD_PAL; + decoder->input = ADV7183_COMPOSITE4; + decoder->output = ADV7183_8BIT_OUT; + + gpio_direction_output(decoder->oe_pin, 1); + /* reset chip */ + gpio_direction_output(decoder->reset_pin, 0); + /* reset pulse width at least 5ms */ + mdelay(10); + gpio_direction_output(decoder->reset_pin, 1); + /* wait 5ms before any further i2c writes are performed */ + mdelay(5); + + adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs)); + adv7183_s_std(sd, decoder->std); + fmt.width = 720; + fmt.height = 576; + adv7183_s_mbus_fmt(sd, &fmt); + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + goto err_free_oe; + } + + return 0; +err_free_oe: + gpio_free(decoder->oe_pin); +err_free_reset: + gpio_free(decoder->reset_pin); +err_free_decoder: + kfree(decoder); + return ret; +} + +static int adv7183_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7183 *decoder = to_adv7183(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(decoder->oe_pin); + gpio_free(decoder->reset_pin); + kfree(decoder); + return 0; +} + +static const struct i2c_device_id adv7183_id[] = { + {"adv7183", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7183_id); + +static struct i2c_driver adv7183_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7183", + }, + .probe = adv7183_probe, + .remove = __devexit_p(adv7183_remove), + .id_table = adv7183_id, +}; + +static __init int adv7183_init(void) +{ + return i2c_add_driver(&adv7183_driver); +} + +static __exit void adv7183_exit(void) +{ + i2c_del_driver(&adv7183_driver); +} + +module_init(adv7183_init); +module_exit(adv7183_exit); + +MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/adv7183_regs.h b/drivers/media/i2c/adv7183_regs.h new file mode 100644 index 000000000000..4a5b7d211d2f --- /dev/null +++ b/drivers/media/i2c/adv7183_regs.h @@ -0,0 +1,107 @@ +/* + * adv7183 - Analog Devices ADV7183 video decoder registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ADV7183_REGS_H_ +#define _ADV7183_REGS_H_ + +#define ADV7183_IN_CTRL 0x00 /* Input control */ +#define ADV7183_VD_SEL 0x01 /* Video selection */ +#define ADV7183_OUT_CTRL 0x03 /* Output control */ +#define ADV7183_EXT_OUT_CTRL 0x04 /* Extended output control */ +#define ADV7183_AUTO_DET_EN 0x07 /* Autodetect enable */ +#define ADV7183_CONTRAST 0x08 /* Contrast */ +#define ADV7183_BRIGHTNESS 0x0A /* Brightness */ +#define ADV7183_HUE 0x0B /* Hue */ +#define ADV7183_DEF_Y 0x0C /* Default value Y */ +#define ADV7183_DEF_C 0x0D /* Default value C */ +#define ADV7183_ADI_CTRL 0x0E /* ADI control */ +#define ADV7183_POW_MANAGE 0x0F /* Power Management */ +#define ADV7183_STATUS_1 0x10 /* Status 1 */ +#define ADV7183_IDENT 0x11 /* Ident */ +#define ADV7183_STATUS_2 0x12 /* Status 2 */ +#define ADV7183_STATUS_3 0x13 /* Status 3 */ +#define ADV7183_ANAL_CLAMP_CTRL 0x14 /* Analog clamp control */ +#define ADV7183_DIGI_CLAMP_CTRL_1 0x15 /* Digital clamp control 1 */ +#define ADV7183_SHAP_FILT_CTRL 0x17 /* Shaping filter control */ +#define ADV7183_SHAP_FILT_CTRL_2 0x18 /* Shaping filter control 2 */ +#define ADV7183_COMB_FILT_CTRL 0x19 /* Comb filter control */ +#define ADV7183_ADI_CTRL_2 0x1D /* ADI control 2 */ +#define ADV7183_PIX_DELAY_CTRL 0x27 /* Pixel delay control */ +#define ADV7183_MISC_GAIN_CTRL 0x2B /* Misc gain control */ +#define ADV7183_AGC_MODE_CTRL 0x2C /* AGC mode control */ +#define ADV7183_CHRO_GAIN_CTRL_1 0x2D /* Chroma gain control 1 */ +#define ADV7183_CHRO_GAIN_CTRL_2 0x2E /* Chroma gain control 2 */ +#define ADV7183_LUMA_GAIN_CTRL_1 0x2F /* Luma gain control 1 */ +#define ADV7183_LUMA_GAIN_CTRL_2 0x30 /* Luma gain control 2 */ +#define ADV7183_VS_FIELD_CTRL_1 0x31 /* Vsync field control 1 */ +#define ADV7183_VS_FIELD_CTRL_2 0x32 /* Vsync field control 2 */ +#define ADV7183_VS_FIELD_CTRL_3 0x33 /* Vsync field control 3 */ +#define ADV7183_HS_POS_CTRL_1 0x34 /* Hsync positon control 1 */ +#define ADV7183_HS_POS_CTRL_2 0x35 /* Hsync positon control 2 */ +#define ADV7183_HS_POS_CTRL_3 0x36 /* Hsync positon control 3 */ +#define ADV7183_POLARITY 0x37 /* Polarity */ +#define ADV7183_NTSC_COMB_CTRL 0x38 /* NTSC comb control */ +#define ADV7183_PAL_COMB_CTRL 0x39 /* PAL comb control */ +#define ADV7183_ADC_CTRL 0x3A /* ADC control */ +#define ADV7183_MAN_WIN_CTRL 0x3D /* Manual window control */ +#define ADV7183_RESAMPLE_CTRL 0x41 /* Resample control */ +#define ADV7183_GEMSTAR_CTRL_1 0x48 /* Gemstar ctrl 1 */ +#define ADV7183_GEMSTAR_CTRL_2 0x49 /* Gemstar ctrl 2 */ +#define ADV7183_GEMSTAR_CTRL_3 0x4A /* Gemstar ctrl 3 */ +#define ADV7183_GEMSTAR_CTRL_4 0x4B /* Gemstar ctrl 4 */ +#define ADV7183_GEMSTAR_CTRL_5 0x4C /* Gemstar ctrl 5 */ +#define ADV7183_CTI_DNR_CTRL_1 0x4D /* CTI DNR ctrl 1 */ +#define ADV7183_CTI_DNR_CTRL_2 0x4E /* CTI DNR ctrl 2 */ +#define ADV7183_CTI_DNR_CTRL_4 0x50 /* CTI DNR ctrl 4 */ +#define ADV7183_LOCK_CNT 0x51 /* Lock count */ +#define ADV7183_FREE_LINE_LEN 0x8F /* Free-Run line length 1 */ +#define ADV7183_VBI_INFO 0x90 /* VBI info */ +#define ADV7183_WSS_1 0x91 /* WSS 1 */ +#define ADV7183_WSS_2 0x92 /* WSS 2 */ +#define ADV7183_EDTV_1 0x93 /* EDTV 1 */ +#define ADV7183_EDTV_2 0x94 /* EDTV 2 */ +#define ADV7183_EDTV_3 0x95 /* EDTV 3 */ +#define ADV7183_CGMS_1 0x96 /* CGMS 1 */ +#define ADV7183_CGMS_2 0x97 /* CGMS 2 */ +#define ADV7183_CGMS_3 0x98 /* CGMS 3 */ +#define ADV7183_CCAP_1 0x99 /* CCAP 1 */ +#define ADV7183_CCAP_2 0x9A /* CCAP 2 */ +#define ADV7183_LETTERBOX_1 0x9B /* Letterbox 1 */ +#define ADV7183_LETTERBOX_2 0x9C /* Letterbox 2 */ +#define ADV7183_LETTERBOX_3 0x9D /* Letterbox 3 */ +#define ADV7183_CRC_EN 0xB2 /* CRC enable */ +#define ADV7183_ADC_SWITCH_1 0xC3 /* ADC switch 1 */ +#define ADV7183_ADC_SWITCH_2 0xC4 /* ADC swithc 2 */ +#define ADV7183_LETTERBOX_CTRL_1 0xDC /* Letterbox control 1 */ +#define ADV7183_LETTERBOX_CTRL_2 0xDD /* Letterbox control 2 */ +#define ADV7183_SD_OFFSET_CB 0xE1 /* SD offset Cb */ +#define ADV7183_SD_OFFSET_CR 0xE2 /* SD offset Cr */ +#define ADV7183_SD_SATURATION_CB 0xE3 /* SD saturation Cb */ +#define ADV7183_SD_SATURATION_CR 0xE4 /* SD saturation Cr */ +#define ADV7183_NTSC_V_BEGIN 0xE5 /* NTSC V bit begin */ +#define ADV7183_NTSC_V_END 0xE6 /* NTSC V bit end */ +#define ADV7183_NTSC_F_TOGGLE 0xE7 /* NTSC F bit toggle */ +#define ADV7183_PAL_V_BEGIN 0xE8 /* PAL V bit begin */ +#define ADV7183_PAL_V_END 0xE9 /* PAL V bit end */ +#define ADV7183_PAL_F_TOGGLE 0xEA /* PAL F bit toggle */ +#define ADV7183_DRIVE_STR 0xF4 /* Drive strength */ +#define ADV7183_IF_COMP_CTRL 0xF8 /* IF comp control */ +#define ADV7183_VS_MODE_CTRL 0xF9 /* VS mode control */ + +#endif diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c new file mode 100644 index 000000000000..2b5aa676a84e --- /dev/null +++ b/drivers/media/i2c/adv7343.c @@ -0,0 +1,476 @@ +/* + * adv7343 - ADV7343 Video Encoder Driver + * + * The encoder hardware does not support SECAM. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ctype.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/videodev2.h> +#include <linux/uaccess.h> + +#include <media/adv7343.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +#include "adv7343_regs.h" + +MODULE_DESCRIPTION("ADV7343 video encoder driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +struct adv7343_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + u8 reg00; + u8 reg01; + u8 reg02; + u8 reg35; + u8 reg80; + u8 reg82; + u32 output; + v4l2_std_id std; +}; + +static inline struct adv7343_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7343_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7343_state, hdl)->sd; +} + +static inline int adv7343_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static const u8 adv7343_init_reg_val[] = { + ADV7343_SOFT_RESET, ADV7343_SOFT_RESET_DEFAULT, + ADV7343_POWER_MODE_REG, ADV7343_POWER_MODE_REG_DEFAULT, + + ADV7343_HD_MODE_REG1, ADV7343_HD_MODE_REG1_DEFAULT, + ADV7343_HD_MODE_REG2, ADV7343_HD_MODE_REG2_DEFAULT, + ADV7343_HD_MODE_REG3, ADV7343_HD_MODE_REG3_DEFAULT, + ADV7343_HD_MODE_REG4, ADV7343_HD_MODE_REG4_DEFAULT, + ADV7343_HD_MODE_REG5, ADV7343_HD_MODE_REG5_DEFAULT, + ADV7343_HD_MODE_REG6, ADV7343_HD_MODE_REG6_DEFAULT, + ADV7343_HD_MODE_REG7, ADV7343_HD_MODE_REG7_DEFAULT, + + ADV7343_SD_MODE_REG1, ADV7343_SD_MODE_REG1_DEFAULT, + ADV7343_SD_MODE_REG2, ADV7343_SD_MODE_REG2_DEFAULT, + ADV7343_SD_MODE_REG3, ADV7343_SD_MODE_REG3_DEFAULT, + ADV7343_SD_MODE_REG4, ADV7343_SD_MODE_REG4_DEFAULT, + ADV7343_SD_MODE_REG5, ADV7343_SD_MODE_REG5_DEFAULT, + ADV7343_SD_MODE_REG6, ADV7343_SD_MODE_REG6_DEFAULT, + ADV7343_SD_MODE_REG7, ADV7343_SD_MODE_REG7_DEFAULT, + ADV7343_SD_MODE_REG8, ADV7343_SD_MODE_REG8_DEFAULT, + + ADV7343_SD_HUE_REG, ADV7343_SD_HUE_REG_DEFAULT, + ADV7343_SD_CGMS_WSS0, ADV7343_SD_CGMS_WSS0_DEFAULT, + ADV7343_SD_BRIGHTNESS_WSS, ADV7343_SD_BRIGHTNESS_WSS_DEFAULT, +}; + +/* + * 2^32 + * FSC(reg) = FSC (HZ) * -------- + * 27000000 + */ +static const struct adv7343_std_info stdinfo[] = { + { + /* FSC(Hz) = 3,579,545.45 Hz */ + SD_STD_NTSC, 569408542, V4L2_STD_NTSC, + }, { + /* FSC(Hz) = 3,575,611.00 Hz */ + SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M, + }, { + /* FSC(Hz) = 3,582,056.00 */ + SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60, + }, +}; + +static int adv7343_setstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7343_state *state = to_state(sd); + struct adv7343_std_info *std_info; + int num_std; + char *fsc_ptr; + u8 reg, val; + int err = 0; + int i = 0; + + std_info = (struct adv7343_std_info *)stdinfo; + num_std = ARRAY_SIZE(stdinfo); + + for (i = 0; i < num_std; i++) { + if (std_info[i].stdid & std) + break; + } + + if (i == num_std) { + v4l2_dbg(1, debug, sd, + "Invalid std or std is not supported: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + + /* Set the standard */ + val = state->reg80 & (~(SD_STD_MASK)); + val |= std_info[i].standard_val3; + err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + + /* Configure the input mode register */ + val = state->reg01 & (~((u8) INPUT_MODE_MASK)); + val |= SD_INPUT_MODE; + err = adv7343_write(sd, ADV7343_MODE_SELECT_REG, val); + if (err < 0) + goto setstd_exit; + + state->reg01 = val; + + /* Program the sub carrier frequency registers */ + fsc_ptr = (unsigned char *)&std_info[i].fsc_val; + reg = ADV7343_FSC_REG0; + for (i = 0; i < 4; i++, reg++, fsc_ptr++) { + err = adv7343_write(sd, reg, *fsc_ptr); + if (err < 0) + goto setstd_exit; + } + + val = state->reg80; + + /* Filter settings */ + if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443)) + val &= 0x03; + else if (std & ~V4L2_STD_SECAM) + val |= 0x04; + + err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + +setstd_exit: + if (err != 0) + v4l2_err(sd, "Error setting std, write failed\n"); + + return err; +} + +static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type) +{ + struct adv7343_state *state = to_state(sd); + unsigned char val; + int err = 0; + + if (output_type > ADV7343_SVIDEO_ID) { + v4l2_dbg(1, debug, sd, + "Invalid output type or output type not supported:%d\n", + output_type); + return -EINVAL; + } + + /* Enable Appropriate DAC */ + val = state->reg00 & 0x03; + + if (output_type == ADV7343_COMPOSITE_ID) + val |= ADV7343_COMPOSITE_POWER_VALUE; + else if (output_type == ADV7343_COMPONENT_ID) + val |= ADV7343_COMPONENT_POWER_VALUE; + else + val |= ADV7343_SVIDEO_POWER_VALUE; + + err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val); + if (err < 0) + goto setoutput_exit; + + state->reg00 = val; + + /* Enable YUV output */ + val = state->reg02 | YUV_OUTPUT_SELECT; + err = adv7343_write(sd, ADV7343_MODE_REG0, val); + if (err < 0) + goto setoutput_exit; + + state->reg02 = val; + + /* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */ + val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI); + err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val); + if (err < 0) + goto setoutput_exit; + + state->reg82 = val; + + /* configure ED/HD Color DAC Swap and ED/HD RGB Input Enable bit to + * zero */ + val = state->reg35 & (HD_RGB_INPUT_DI & HD_DAC_SWAP_DI); + err = adv7343_write(sd, ADV7343_HD_MODE_REG6, val); + if (err < 0) + goto setoutput_exit; + + state->reg35 = val; + +setoutput_exit: + if (err != 0) + v4l2_err(sd, "Error setting output, write failed\n"); + + return err; +} + +static int adv7343_log_status(struct v4l2_subdev *sd) +{ + struct adv7343_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std); + v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" : + ((state->output == 1) ? "Component" : "S-Video")); + return 0; +} + +static int adv7343_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS, + ctrl->val); + + case V4L2_CID_HUE: + return adv7343_write(sd, ADV7343_SD_HUE_REG, ctrl->val); + + case V4L2_CID_GAIN: + return adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, ctrl->val); + } + return -EINVAL; +} + +static int adv7343_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7343, 0); +} + +static const struct v4l2_ctrl_ops adv7343_ctrl_ops = { + .s_ctrl = adv7343_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7343_core_ops = { + .log_status = adv7343_log_status, + .g_chip_ident = adv7343_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static int adv7343_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + if (state->std == std) + return 0; + + err = adv7343_setstd(sd, std); + if (!err) + state->std = std; + + return err; +} + +static int adv7343_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + + if (state->output == output) + return 0; + + err = adv7343_setoutput(sd, output); + if (!err) + state->output = output; + + return err; +} + +static const struct v4l2_subdev_video_ops adv7343_video_ops = { + .s_std_output = adv7343_s_std_output, + .s_routing = adv7343_s_routing, +}; + +static const struct v4l2_subdev_ops adv7343_ops = { + .core = &adv7343_core_ops, + .video = &adv7343_video_ops, +}; + +static int adv7343_initialize(struct v4l2_subdev *sd) +{ + struct adv7343_state *state = to_state(sd); + int err = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(adv7343_init_reg_val); i += 2) { + + err = adv7343_write(sd, adv7343_init_reg_val[i], + adv7343_init_reg_val[i+1]); + if (err) { + v4l2_err(sd, "Error initializing\n"); + return err; + } + } + + /* Configure for default video standard */ + err = adv7343_setoutput(sd, state->output); + if (err < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + err = adv7343_setstd(sd, state->std); + if (err < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return err; +} + +static int adv7343_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7343_state *state; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct adv7343_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + state->reg00 = 0x80; + state->reg01 = 0x00; + state->reg02 = 0x20; + state->reg35 = 0x00; + state->reg80 = ADV7343_SD_MODE_REG1_DEFAULT; + state->reg82 = ADV7343_SD_MODE_REG2_DEFAULT; + + state->output = ADV7343_COMPOSITE_ID; + state->std = V4L2_STD_NTSC; + + v4l2_i2c_subdev_init(&state->sd, client, &adv7343_ops); + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7343_BRIGHTNESS_MIN, + ADV7343_BRIGHTNESS_MAX, 1, + ADV7343_BRIGHTNESS_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_HUE, ADV7343_HUE_MIN, + ADV7343_HUE_MAX, 1, + ADV7343_HUE_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_GAIN, ADV7343_GAIN_MIN, + ADV7343_GAIN_MAX, 1, + ADV7343_GAIN_DEF); + state->sd.ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + + err = adv7343_initialize(&state->sd); + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + } + return err; +} + +static int adv7343_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7343_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + + return 0; +} + +static const struct i2c_device_id adv7343_id[] = { + {"adv7343", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, adv7343_id); + +static struct i2c_driver adv7343_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7343", + }, + .probe = adv7343_probe, + .remove = adv7343_remove, + .id_table = adv7343_id, +}; + +module_i2c_driver(adv7343_driver); diff --git a/drivers/media/i2c/adv7343_regs.h b/drivers/media/i2c/adv7343_regs.h new file mode 100644 index 000000000000..446606764346 --- /dev/null +++ b/drivers/media/i2c/adv7343_regs.h @@ -0,0 +1,181 @@ +/* + * ADV7343 encoder related structure and register definitions + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7343_REG_H +#define ADV7343_REGS_H + +struct adv7343_std_info { + u32 standard_val3; + u32 fsc_val; + v4l2_std_id stdid; +}; + +/* Register offset macros */ +#define ADV7343_POWER_MODE_REG (0x00) +#define ADV7343_MODE_SELECT_REG (0x01) +#define ADV7343_MODE_REG0 (0x02) + +#define ADV7343_DAC2_OUTPUT_LEVEL (0x0b) + +#define ADV7343_SOFT_RESET (0x17) + +#define ADV7343_HD_MODE_REG1 (0x30) +#define ADV7343_HD_MODE_REG2 (0x31) +#define ADV7343_HD_MODE_REG3 (0x32) +#define ADV7343_HD_MODE_REG4 (0x33) +#define ADV7343_HD_MODE_REG5 (0x34) +#define ADV7343_HD_MODE_REG6 (0x35) + +#define ADV7343_HD_MODE_REG7 (0x39) + +#define ADV7343_SD_MODE_REG1 (0x80) +#define ADV7343_SD_MODE_REG2 (0x82) +#define ADV7343_SD_MODE_REG3 (0x83) +#define ADV7343_SD_MODE_REG4 (0x84) +#define ADV7343_SD_MODE_REG5 (0x86) +#define ADV7343_SD_MODE_REG6 (0x87) +#define ADV7343_SD_MODE_REG7 (0x88) +#define ADV7343_SD_MODE_REG8 (0x89) + +#define ADV7343_FSC_REG0 (0x8C) +#define ADV7343_FSC_REG1 (0x8D) +#define ADV7343_FSC_REG2 (0x8E) +#define ADV7343_FSC_REG3 (0x8F) + +#define ADV7343_SD_CGMS_WSS0 (0x99) + +#define ADV7343_SD_HUE_REG (0xA0) +#define ADV7343_SD_BRIGHTNESS_WSS (0xA1) + +/* Default values for the registers */ +#define ADV7343_POWER_MODE_REG_DEFAULT (0x10) +#define ADV7343_HD_MODE_REG1_DEFAULT (0x3C) /* Changed Default + 720p EAVSAV code*/ +#define ADV7343_HD_MODE_REG2_DEFAULT (0x01) /* Changed Pixel data + valid */ +#define ADV7343_HD_MODE_REG3_DEFAULT (0x00) /* Color delay 0 clks */ +#define ADV7343_HD_MODE_REG4_DEFAULT (0xE8) /* Changed */ +#define ADV7343_HD_MODE_REG5_DEFAULT (0x08) +#define ADV7343_HD_MODE_REG6_DEFAULT (0x00) +#define ADV7343_HD_MODE_REG7_DEFAULT (0x00) +#define ADV7343_SD_MODE_REG8_DEFAULT (0x00) +#define ADV7343_SOFT_RESET_DEFAULT (0x02) +#define ADV7343_COMPOSITE_POWER_VALUE (0x80) +#define ADV7343_COMPONENT_POWER_VALUE (0x1C) +#define ADV7343_SVIDEO_POWER_VALUE (0x60) +#define ADV7343_SD_HUE_REG_DEFAULT (127) +#define ADV7343_SD_BRIGHTNESS_WSS_DEFAULT (0x03) + +#define ADV7343_SD_CGMS_WSS0_DEFAULT (0x10) + +#define ADV7343_SD_MODE_REG1_DEFAULT (0x00) +#define ADV7343_SD_MODE_REG2_DEFAULT (0xC9) +#define ADV7343_SD_MODE_REG3_DEFAULT (0x10) +#define ADV7343_SD_MODE_REG4_DEFAULT (0x01) +#define ADV7343_SD_MODE_REG5_DEFAULT (0x02) +#define ADV7343_SD_MODE_REG6_DEFAULT (0x0C) +#define ADV7343_SD_MODE_REG7_DEFAULT (0x04) +#define ADV7343_SD_MODE_REG8_DEFAULT (0x00) + +/* Bit masks for Mode Select Register */ +#define INPUT_MODE_MASK (0x70) +#define SD_INPUT_MODE (0x00) +#define HD_720P_INPUT_MODE (0x10) +#define HD_1080I_INPUT_MODE (0x10) + +/* Bit masks for Mode Register 0 */ +#define TEST_PATTERN_BLACK_BAR_EN (0x04) +#define YUV_OUTPUT_SELECT (0x20) +#define RGB_OUTPUT_SELECT (0xDF) + +/* Bit masks for DAC output levels */ +#define DAC_OUTPUT_LEVEL_MASK (0xFF) + +/* Bit masks for soft reset register */ +#define SOFT_RESET (0x02) + +/* Bit masks for HD Mode Register 1 */ +#define OUTPUT_STD_MASK (0x03) +#define OUTPUT_STD_SHIFT (0) +#define OUTPUT_STD_EIA0_2 (0x00) +#define OUTPUT_STD_EIA0_1 (0x01) +#define OUTPUT_STD_FULL (0x02) +#define EMBEDDED_SYNC (0x04) +#define EXTERNAL_SYNC (0xFB) +#define STD_MODE_SHIFT (3) +#define STD_MODE_MASK (0x1F) +#define STD_MODE_720P (0x05) +#define STD_MODE_720P_25 (0x08) +#define STD_MODE_720P_30 (0x07) +#define STD_MODE_720P_50 (0x06) +#define STD_MODE_1080I (0x0D) +#define STD_MODE_1080I_25fps (0x0E) +#define STD_MODE_1080P_24 (0x12) +#define STD_MODE_1080P_25 (0x10) +#define STD_MODE_1080P_30 (0x0F) +#define STD_MODE_525P (0x00) +#define STD_MODE_625P (0x03) + +/* Bit masks for SD Mode Register 1 */ +#define SD_STD_MASK (0x03) +#define SD_STD_NTSC (0x00) +#define SD_STD_PAL_BDGHI (0x01) +#define SD_STD_PAL_M (0x02) +#define SD_STD_PAL_N (0x03) +#define SD_LUMA_FLTR_MASK (0x7) +#define SD_LUMA_FLTR_SHIFT (0x2) +#define SD_CHROMA_FLTR_MASK (0x7) +#define SD_CHROMA_FLTR_SHIFT (0x5) + +/* Bit masks for SD Mode Register 2 */ +#define SD_PBPR_SSAF_EN (0x01) +#define SD_PBPR_SSAF_DI (0xFE) +#define SD_DAC_1_DI (0xFD) +#define SD_DAC_2_DI (0xFB) +#define SD_PEDESTAL_EN (0x08) +#define SD_PEDESTAL_DI (0xF7) +#define SD_SQUARE_PIXEL_EN (0x10) +#define SD_SQUARE_PIXEL_DI (0xEF) +#define SD_PIXEL_DATA_VALID (0x40) +#define SD_ACTIVE_EDGE_EN (0x80) +#define SD_ACTIVE_EDGE_DI (0x7F) + +/* Bit masks for HD Mode Register 6 */ +#define HD_RGB_INPUT_EN (0x02) +#define HD_RGB_INPUT_DI (0xFD) +#define HD_PBPR_SYNC_EN (0x04) +#define HD_PBPR_SYNC_DI (0xFB) +#define HD_DAC_SWAP_EN (0x08) +#define HD_DAC_SWAP_DI (0xF7) +#define HD_GAMMA_CURVE_A (0xEF) +#define HD_GAMMA_CURVE_B (0x10) +#define HD_GAMMA_EN (0x20) +#define HD_GAMMA_DI (0xDF) +#define HD_ADPT_FLTR_MODEB (0x40) +#define HD_ADPT_FLTR_MODEA (0xBF) +#define HD_ADPT_FLTR_EN (0x80) +#define HD_ADPT_FLTR_DI (0x7F) + +#define ADV7343_BRIGHTNESS_MAX (127) +#define ADV7343_BRIGHTNESS_MIN (0) +#define ADV7343_BRIGHTNESS_DEF (3) +#define ADV7343_HUE_MAX (255) +#define ADV7343_HUE_MIN (0) +#define ADV7343_HUE_DEF (127) +#define ADV7343_GAIN_MAX (64) +#define ADV7343_GAIN_MIN (-64) +#define ADV7343_GAIN_DEF (0) + +#endif diff --git a/drivers/media/i2c/adv7393.c b/drivers/media/i2c/adv7393.c new file mode 100644 index 000000000000..3dc6098c7267 --- /dev/null +++ b/drivers/media/i2c/adv7393.c @@ -0,0 +1,487 @@ +/* + * adv7393 - ADV7393 Video Encoder Driver + * + * The encoder hardware does not support SECAM. + * + * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/ + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on ADV7343 driver, + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ctype.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/videodev2.h> +#include <linux/uaccess.h> + +#include <media/adv7393.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +#include "adv7393_regs.h" + +MODULE_DESCRIPTION("ADV7393 video encoder driver"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +struct adv7393_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + u8 reg00; + u8 reg01; + u8 reg02; + u8 reg35; + u8 reg80; + u8 reg82; + u32 output; + v4l2_std_id std; +}; + +static inline struct adv7393_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7393_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7393_state, hdl)->sd; +} + +static inline int adv7393_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static const u8 adv7393_init_reg_val[] = { + ADV7393_SOFT_RESET, ADV7393_SOFT_RESET_DEFAULT, + ADV7393_POWER_MODE_REG, ADV7393_POWER_MODE_REG_DEFAULT, + + ADV7393_HD_MODE_REG1, ADV7393_HD_MODE_REG1_DEFAULT, + ADV7393_HD_MODE_REG2, ADV7393_HD_MODE_REG2_DEFAULT, + ADV7393_HD_MODE_REG3, ADV7393_HD_MODE_REG3_DEFAULT, + ADV7393_HD_MODE_REG4, ADV7393_HD_MODE_REG4_DEFAULT, + ADV7393_HD_MODE_REG5, ADV7393_HD_MODE_REG5_DEFAULT, + ADV7393_HD_MODE_REG6, ADV7393_HD_MODE_REG6_DEFAULT, + ADV7393_HD_MODE_REG7, ADV7393_HD_MODE_REG7_DEFAULT, + + ADV7393_SD_MODE_REG1, ADV7393_SD_MODE_REG1_DEFAULT, + ADV7393_SD_MODE_REG2, ADV7393_SD_MODE_REG2_DEFAULT, + ADV7393_SD_MODE_REG3, ADV7393_SD_MODE_REG3_DEFAULT, + ADV7393_SD_MODE_REG4, ADV7393_SD_MODE_REG4_DEFAULT, + ADV7393_SD_MODE_REG5, ADV7393_SD_MODE_REG5_DEFAULT, + ADV7393_SD_MODE_REG6, ADV7393_SD_MODE_REG6_DEFAULT, + ADV7393_SD_MODE_REG7, ADV7393_SD_MODE_REG7_DEFAULT, + ADV7393_SD_MODE_REG8, ADV7393_SD_MODE_REG8_DEFAULT, + + ADV7393_SD_TIMING_REG0, ADV7393_SD_TIMING_REG0_DEFAULT, + + ADV7393_SD_HUE_ADJUST, ADV7393_SD_HUE_ADJUST_DEFAULT, + ADV7393_SD_CGMS_WSS0, ADV7393_SD_CGMS_WSS0_DEFAULT, + ADV7393_SD_BRIGHTNESS_WSS, ADV7393_SD_BRIGHTNESS_WSS_DEFAULT, +}; + +/* + * 2^32 + * FSC(reg) = FSC (HZ) * -------- + * 27000000 + */ +static const struct adv7393_std_info stdinfo[] = { + { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443, + }, { + /* FSC(Hz) = 3,579,545.45 Hz */ + SD_STD_NTSC, 569408542, V4L2_STD_NTSC, + }, { + /* FSC(Hz) = 3,575,611.00 Hz */ + SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M, + }, { + /* FSC(Hz) = 3,582,056.00 Hz */ + SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60, + }, { + /* FSC(Hz) = 4,433,618.75 Hz */ + SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL, + }, +}; + +static int adv7393_setstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7393_state *state = to_state(sd); + const struct adv7393_std_info *std_info; + int num_std; + u8 reg; + u32 val; + int err = 0; + int i; + + num_std = ARRAY_SIZE(stdinfo); + + for (i = 0; i < num_std; i++) { + if (stdinfo[i].stdid & std) + break; + } + + if (i == num_std) { + v4l2_dbg(1, debug, sd, + "Invalid std or std is not supported: %llx\n", + (unsigned long long)std); + return -EINVAL; + } + + std_info = &stdinfo[i]; + + /* Set the standard */ + val = state->reg80 & ~SD_STD_MASK; + val |= std_info->standard_val3; + err = adv7393_write(sd, ADV7393_SD_MODE_REG1, val); + if (err < 0) + goto setstd_exit; + + state->reg80 = val; + + /* Configure the input mode register */ + val = state->reg01 & ~INPUT_MODE_MASK; + val |= SD_INPUT_MODE; + err = adv7393_write(sd, ADV7393_MODE_SELECT_REG, val); + if (err < 0) + goto setstd_exit; + + state->reg01 = val; + + /* Program the sub carrier frequency registers */ + val = std_info->fsc_val; + for (reg = ADV7393_FSC_REG0; reg <= ADV7393_FSC_REG3; reg++) { + err = adv7393_write(sd, reg, val); + if (err < 0) + goto setstd_exit; + val >>= 8; + } + + val = state->reg82; + + /* Pedestal settings */ + if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443)) + val |= SD_PEDESTAL_EN; + else + val &= SD_PEDESTAL_DI; + + err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val); + if (err < 0) + goto setstd_exit; + + state->reg82 = val; + +setstd_exit: + if (err != 0) + v4l2_err(sd, "Error setting std, write failed\n"); + + return err; +} + +static int adv7393_setoutput(struct v4l2_subdev *sd, u32 output_type) +{ + struct adv7393_state *state = to_state(sd); + u8 val; + int err = 0; + + if (output_type > ADV7393_SVIDEO_ID) { + v4l2_dbg(1, debug, sd, + "Invalid output type or output type not supported:%d\n", + output_type); + return -EINVAL; + } + + /* Enable Appropriate DAC */ + val = state->reg00 & 0x03; + + if (output_type == ADV7393_COMPOSITE_ID) + val |= ADV7393_COMPOSITE_POWER_VALUE; + else if (output_type == ADV7393_COMPONENT_ID) + val |= ADV7393_COMPONENT_POWER_VALUE; + else + val |= ADV7393_SVIDEO_POWER_VALUE; + + err = adv7393_write(sd, ADV7393_POWER_MODE_REG, val); + if (err < 0) + goto setoutput_exit; + + state->reg00 = val; + + /* Enable YUV output */ + val = state->reg02 | YUV_OUTPUT_SELECT; + err = adv7393_write(sd, ADV7393_MODE_REG0, val); + if (err < 0) + goto setoutput_exit; + + state->reg02 = val; + + /* configure SD DAC Output 1 bit */ + val = state->reg82; + if (output_type == ADV7393_COMPONENT_ID) + val &= SD_DAC_OUT1_DI; + else + val |= SD_DAC_OUT1_EN; + err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val); + if (err < 0) + goto setoutput_exit; + + state->reg82 = val; + + /* configure ED/HD Color DAC Swap bit to zero */ + val = state->reg35 & HD_DAC_SWAP_DI; + err = adv7393_write(sd, ADV7393_HD_MODE_REG6, val); + if (err < 0) + goto setoutput_exit; + + state->reg35 = val; + +setoutput_exit: + if (err != 0) + v4l2_err(sd, "Error setting output, write failed\n"); + + return err; +} + +static int adv7393_log_status(struct v4l2_subdev *sd) +{ + struct adv7393_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std); + v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" : + ((state->output == 1) ? "Component" : "S-Video")); + return 0; +} + +static int adv7393_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return adv7393_write(sd, ADV7393_SD_BRIGHTNESS_WSS, + ctrl->val & SD_BRIGHTNESS_VALUE_MASK); + + case V4L2_CID_HUE: + return adv7393_write(sd, ADV7393_SD_HUE_ADJUST, + ctrl->val - ADV7393_HUE_MIN); + + case V4L2_CID_GAIN: + return adv7393_write(sd, ADV7393_DAC123_OUTPUT_LEVEL, + ctrl->val); + } + return -EINVAL; +} + +static int adv7393_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7393, 0); +} + +static const struct v4l2_ctrl_ops adv7393_ctrl_ops = { + .s_ctrl = adv7393_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops adv7393_core_ops = { + .log_status = adv7393_log_status, + .g_chip_ident = adv7393_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static int adv7393_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct adv7393_state *state = to_state(sd); + int err = 0; + + if (state->std == std) + return 0; + + err = adv7393_setstd(sd, std); + if (!err) + state->std = std; + + return err; +} + +static int adv7393_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct adv7393_state *state = to_state(sd); + int err = 0; + + if (state->output == output) + return 0; + + err = adv7393_setoutput(sd, output); + if (!err) + state->output = output; + + return err; +} + +static const struct v4l2_subdev_video_ops adv7393_video_ops = { + .s_std_output = adv7393_s_std_output, + .s_routing = adv7393_s_routing, +}; + +static const struct v4l2_subdev_ops adv7393_ops = { + .core = &adv7393_core_ops, + .video = &adv7393_video_ops, +}; + +static int adv7393_initialize(struct v4l2_subdev *sd) +{ + struct adv7393_state *state = to_state(sd); + int err = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(adv7393_init_reg_val); i += 2) { + + err = adv7393_write(sd, adv7393_init_reg_val[i], + adv7393_init_reg_val[i+1]); + if (err) { + v4l2_err(sd, "Error initializing\n"); + return err; + } + } + + /* Configure for default video standard */ + err = adv7393_setoutput(sd, state->output); + if (err < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + err = adv7393_setstd(sd, state->std); + if (err < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return err; +} + +static int adv7393_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adv7393_state *state; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct adv7393_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + state->reg00 = ADV7393_POWER_MODE_REG_DEFAULT; + state->reg01 = 0x00; + state->reg02 = 0x20; + state->reg35 = ADV7393_HD_MODE_REG6_DEFAULT; + state->reg80 = ADV7393_SD_MODE_REG1_DEFAULT; + state->reg82 = ADV7393_SD_MODE_REG2_DEFAULT; + + state->output = ADV7393_COMPOSITE_ID; + state->std = V4L2_STD_NTSC; + + v4l2_i2c_subdev_init(&state->sd, client, &adv7393_ops); + + v4l2_ctrl_handler_init(&state->hdl, 3); + v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7393_BRIGHTNESS_MIN, + ADV7393_BRIGHTNESS_MAX, 1, + ADV7393_BRIGHTNESS_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops, + V4L2_CID_HUE, ADV7393_HUE_MIN, + ADV7393_HUE_MAX, 1, + ADV7393_HUE_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops, + V4L2_CID_GAIN, ADV7393_GAIN_MIN, + ADV7393_GAIN_MAX, 1, + ADV7393_GAIN_DEF); + state->sd.ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + + err = adv7393_initialize(&state->sd); + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + } + return err; +} + +static int adv7393_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7393_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + + return 0; +} + +static const struct i2c_device_id adv7393_id[] = { + {"adv7393", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, adv7393_id); + +static struct i2c_driver adv7393_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "adv7393", + }, + .probe = adv7393_probe, + .remove = adv7393_remove, + .id_table = adv7393_id, +}; +module_i2c_driver(adv7393_driver); diff --git a/drivers/media/i2c/adv7393_regs.h b/drivers/media/i2c/adv7393_regs.h new file mode 100644 index 000000000000..78968330f0be --- /dev/null +++ b/drivers/media/i2c/adv7393_regs.h @@ -0,0 +1,188 @@ +/* + * ADV7393 encoder related structure and register definitions + * + * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/ + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on ADV7343 driver, + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7393_REGS_H +#define ADV7393_REGS_H + +struct adv7393_std_info { + u32 standard_val3; + u32 fsc_val; + v4l2_std_id stdid; +}; + +/* Register offset macros */ +#define ADV7393_POWER_MODE_REG (0x00) +#define ADV7393_MODE_SELECT_REG (0x01) +#define ADV7393_MODE_REG0 (0x02) + +#define ADV7393_DAC123_OUTPUT_LEVEL (0x0B) + +#define ADV7393_SOFT_RESET (0x17) + +#define ADV7393_HD_MODE_REG1 (0x30) +#define ADV7393_HD_MODE_REG2 (0x31) +#define ADV7393_HD_MODE_REG3 (0x32) +#define ADV7393_HD_MODE_REG4 (0x33) +#define ADV7393_HD_MODE_REG5 (0x34) +#define ADV7393_HD_MODE_REG6 (0x35) + +#define ADV7393_HD_MODE_REG7 (0x39) + +#define ADV7393_SD_MODE_REG1 (0x80) +#define ADV7393_SD_MODE_REG2 (0x82) +#define ADV7393_SD_MODE_REG3 (0x83) +#define ADV7393_SD_MODE_REG4 (0x84) +#define ADV7393_SD_MODE_REG5 (0x86) +#define ADV7393_SD_MODE_REG6 (0x87) +#define ADV7393_SD_MODE_REG7 (0x88) +#define ADV7393_SD_MODE_REG8 (0x89) + +#define ADV7393_SD_TIMING_REG0 (0x8A) + +#define ADV7393_FSC_REG0 (0x8C) +#define ADV7393_FSC_REG1 (0x8D) +#define ADV7393_FSC_REG2 (0x8E) +#define ADV7393_FSC_REG3 (0x8F) + +#define ADV7393_SD_CGMS_WSS0 (0x99) + +#define ADV7393_SD_HUE_ADJUST (0xA0) +#define ADV7393_SD_BRIGHTNESS_WSS (0xA1) + +/* Default values for the registers */ +#define ADV7393_POWER_MODE_REG_DEFAULT (0x10) +#define ADV7393_HD_MODE_REG1_DEFAULT (0x3C) /* Changed Default + 720p EAV/SAV code*/ +#define ADV7393_HD_MODE_REG2_DEFAULT (0x01) /* Changed Pixel data + valid */ +#define ADV7393_HD_MODE_REG3_DEFAULT (0x00) /* Color delay 0 clks */ +#define ADV7393_HD_MODE_REG4_DEFAULT (0xEC) /* Changed */ +#define ADV7393_HD_MODE_REG5_DEFAULT (0x08) +#define ADV7393_HD_MODE_REG6_DEFAULT (0x00) +#define ADV7393_HD_MODE_REG7_DEFAULT (0x00) +#define ADV7393_SOFT_RESET_DEFAULT (0x02) +#define ADV7393_COMPOSITE_POWER_VALUE (0x10) +#define ADV7393_COMPONENT_POWER_VALUE (0x1C) +#define ADV7393_SVIDEO_POWER_VALUE (0x0C) +#define ADV7393_SD_HUE_ADJUST_DEFAULT (0x80) +#define ADV7393_SD_BRIGHTNESS_WSS_DEFAULT (0x00) + +#define ADV7393_SD_CGMS_WSS0_DEFAULT (0x10) + +#define ADV7393_SD_MODE_REG1_DEFAULT (0x10) +#define ADV7393_SD_MODE_REG2_DEFAULT (0xC9) +#define ADV7393_SD_MODE_REG3_DEFAULT (0x00) +#define ADV7393_SD_MODE_REG4_DEFAULT (0x00) +#define ADV7393_SD_MODE_REG5_DEFAULT (0x02) +#define ADV7393_SD_MODE_REG6_DEFAULT (0x8C) +#define ADV7393_SD_MODE_REG7_DEFAULT (0x14) +#define ADV7393_SD_MODE_REG8_DEFAULT (0x00) + +#define ADV7393_SD_TIMING_REG0_DEFAULT (0x0C) + +/* Bit masks for Mode Select Register */ +#define INPUT_MODE_MASK (0x70) +#define SD_INPUT_MODE (0x00) +#define HD_720P_INPUT_MODE (0x10) +#define HD_1080I_INPUT_MODE (0x10) + +/* Bit masks for Mode Register 0 */ +#define TEST_PATTERN_BLACK_BAR_EN (0x04) +#define YUV_OUTPUT_SELECT (0x20) +#define RGB_OUTPUT_SELECT (0xDF) + +/* Bit masks for SD brightness/WSS */ +#define SD_BRIGHTNESS_VALUE_MASK (0x7F) +#define SD_BLANK_WSS_DATA_MASK (0x80) + +/* Bit masks for soft reset register */ +#define SOFT_RESET (0x02) + +/* Bit masks for HD Mode Register 1 */ +#define OUTPUT_STD_MASK (0x03) +#define OUTPUT_STD_SHIFT (0) +#define OUTPUT_STD_EIA0_2 (0x00) +#define OUTPUT_STD_EIA0_1 (0x01) +#define OUTPUT_STD_FULL (0x02) +#define EMBEDDED_SYNC (0x04) +#define EXTERNAL_SYNC (0xFB) +#define STD_MODE_MASK (0x1F) +#define STD_MODE_SHIFT (3) +#define STD_MODE_720P (0x05) +#define STD_MODE_720P_25 (0x08) +#define STD_MODE_720P_30 (0x07) +#define STD_MODE_720P_50 (0x06) +#define STD_MODE_1080I (0x0D) +#define STD_MODE_1080I_25 (0x0E) +#define STD_MODE_1080P_24 (0x11) +#define STD_MODE_1080P_25 (0x10) +#define STD_MODE_1080P_30 (0x0F) +#define STD_MODE_525P (0x00) +#define STD_MODE_625P (0x03) + +/* Bit masks for SD Mode Register 1 */ +#define SD_STD_MASK (0x03) +#define SD_STD_NTSC (0x00) +#define SD_STD_PAL_BDGHI (0x01) +#define SD_STD_PAL_M (0x02) +#define SD_STD_PAL_N (0x03) +#define SD_LUMA_FLTR_MASK (0x07) +#define SD_LUMA_FLTR_SHIFT (2) +#define SD_CHROMA_FLTR_MASK (0x07) +#define SD_CHROMA_FLTR_SHIFT (5) + +/* Bit masks for SD Mode Register 2 */ +#define SD_PRPB_SSAF_EN (0x01) +#define SD_PRPB_SSAF_DI (0xFE) +#define SD_DAC_OUT1_EN (0x02) +#define SD_DAC_OUT1_DI (0xFD) +#define SD_PEDESTAL_EN (0x08) +#define SD_PEDESTAL_DI (0xF7) +#define SD_SQUARE_PIXEL_EN (0x10) +#define SD_SQUARE_PIXEL_DI (0xEF) +#define SD_PIXEL_DATA_VALID (0x40) +#define SD_ACTIVE_EDGE_EN (0x80) +#define SD_ACTIVE_EDGE_DI (0x7F) + +/* Bit masks for HD Mode Register 6 */ +#define HD_PRPB_SYNC_EN (0x04) +#define HD_PRPB_SYNC_DI (0xFB) +#define HD_DAC_SWAP_EN (0x08) +#define HD_DAC_SWAP_DI (0xF7) +#define HD_GAMMA_CURVE_A (0xEF) +#define HD_GAMMA_CURVE_B (0x10) +#define HD_GAMMA_EN (0x20) +#define HD_GAMMA_DI (0xDF) +#define HD_ADPT_FLTR_MODEA (0xBF) +#define HD_ADPT_FLTR_MODEB (0x40) +#define HD_ADPT_FLTR_EN (0x80) +#define HD_ADPT_FLTR_DI (0x7F) + +#define ADV7393_BRIGHTNESS_MAX (63) +#define ADV7393_BRIGHTNESS_MIN (-64) +#define ADV7393_BRIGHTNESS_DEF (0) +#define ADV7393_HUE_MAX (127) +#define ADV7393_HUE_MIN (-128) +#define ADV7393_HUE_DEF (0) +#define ADV7393_GAIN_MAX (64) +#define ADV7393_GAIN_MIN (-64) +#define ADV7393_GAIN_DEF (0) + +#endif diff --git a/drivers/media/i2c/ak881x.c b/drivers/media/i2c/ak881x.c new file mode 100644 index 000000000000..ba674656b10d --- /dev/null +++ b/drivers/media/i2c/ak881x.c @@ -0,0 +1,359 @@ +/* + * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM) + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/module.h> + +#include <media/ak881x.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> + +#define AK881X_INTERFACE_MODE 0 +#define AK881X_VIDEO_PROCESS1 1 +#define AK881X_VIDEO_PROCESS2 2 +#define AK881X_VIDEO_PROCESS3 3 +#define AK881X_DAC_MODE 5 +#define AK881X_STATUS 0x24 +#define AK881X_DEVICE_ID 0x25 +#define AK881X_DEVICE_REVISION 0x26 + +struct ak881x { + struct v4l2_subdev subdev; + struct ak881x_pdata *pdata; + unsigned int lines; + int id; /* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h */ + char revision; /* DEVICE_REVISION content */ +}; + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u8 data) +{ + return i2c_smbus_write_byte_data(client, reg, data); +} + +static int reg_set(struct i2c_client *client, const u8 reg, + const u8 data, u8 mask) +{ + int ret = reg_read(client, reg); + if (ret < 0) + return ret; + return reg_write(client, reg, (ret & ~mask) | (data & mask)); +} + +static struct ak881x *to_ak881x(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct ak881x, subdev); +} + +static int ak881x_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = ak881x->id; + id->revision = ak881x->revision; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ak881x_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + reg->val = reg_read(client, reg->reg); + + if (reg->val > 0xffff) + return -EIO; + + return 0; +} + +static int ak881x_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + if (reg_write(client, reg->reg, reg->val) < 0) + return -EIO; + + return 0; +} +#endif + +static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + v4l_bound_align_image(&mf->width, 0, 720, 2, + &mf->height, 0, ak881x->lines, 1, 0); + mf->field = V4L2_FIELD_INTERLACED; + mf->code = V4L2_MBUS_FMT_YUYV8_2X8; + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + if (mf->field != V4L2_FIELD_INTERLACED || + mf->code != V4L2_MBUS_FMT_YUYV8_2X8) + return -EINVAL; + + return ak881x_try_g_mbus_fmt(sd, mf); +} + +static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_YUYV8_2X8; + return 0; +} + +static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = 720; + a->bounds.height = ak881x->lines; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + u8 vp1; + + if (std == V4L2_STD_NTSC_443) { + vp1 = 3; + ak881x->lines = 480; + } else if (std == V4L2_STD_PAL_M) { + vp1 = 5; + ak881x->lines = 480; + } else if (std == V4L2_STD_PAL_60) { + vp1 = 7; + ak881x->lines = 480; + } else if (std && !(std & ~V4L2_STD_PAL)) { + vp1 = 0xf; + ak881x->lines = 576; + } else if (std && !(std & ~V4L2_STD_NTSC)) { + vp1 = 0; + ak881x->lines = 480; + } else { + /* No SECAM or PAL_N/Nc supported */ + return -EINVAL; + } + + reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf); + + return 0; +} + +static int ak881x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ak881x *ak881x = to_ak881x(client); + + if (enable) { + u8 dac; + /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */ + /* Default: composite output */ + if (ak881x->pdata->flags & AK881X_COMPONENT) + dac = 3; + else + dac = 4; + /* Turn on the DAC(s) */ + reg_write(client, AK881X_DAC_MODE, dac); + dev_dbg(&client->dev, "chip status 0x%x\n", + reg_read(client, AK881X_STATUS)); + } else { + /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */ + reg_write(client, AK881X_DAC_MODE, 0); + dev_dbg(&client->dev, "chip status 0x%x\n", + reg_read(client, AK881X_STATUS)); + } + + return 0; +} + +static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = { + .g_chip_ident = ak881x_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ak881x_g_register, + .s_register = ak881x_s_register, +#endif +}; + +static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { + .s_mbus_fmt = ak881x_s_mbus_fmt, + .g_mbus_fmt = ak881x_try_g_mbus_fmt, + .try_mbus_fmt = ak881x_try_g_mbus_fmt, + .cropcap = ak881x_cropcap, + .enum_mbus_fmt = ak881x_enum_mbus_fmt, + .s_std_output = ak881x_s_std_output, + .s_stream = ak881x_s_stream, +}; + +static struct v4l2_subdev_ops ak881x_subdev_ops = { + .core = &ak881x_subdev_core_ops, + .video = &ak881x_subdev_video_ops, +}; + +static int ak881x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct ak881x *ak881x; + u8 ifmode, data; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL); + if (!ak881x) + return -ENOMEM; + + v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops); + + data = reg_read(client, AK881X_DEVICE_ID); + + switch (data) { + case 0x13: + ak881x->id = V4L2_IDENT_AK8813; + break; + case 0x14: + ak881x->id = V4L2_IDENT_AK8814; + break; + default: + dev_err(&client->dev, + "No ak881x chip detected, register read %x\n", data); + kfree(ak881x); + return -ENODEV; + } + + ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION); + ak881x->pdata = client->dev.platform_data; + + if (ak881x->pdata) { + if (ak881x->pdata->flags & AK881X_FIELD) + ifmode = 4; + else + ifmode = 0; + + switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) { + case AK881X_IF_MODE_BT656: + ifmode |= 1; + break; + case AK881X_IF_MODE_MASTER: + ifmode |= 2; + break; + case AK881X_IF_MODE_SLAVE: + default: + break; + } + + dev_dbg(&client->dev, "IF mode %x\n", ifmode); + + /* + * "Line Blanking No." seems to be the same as the number of + * "black" lines on, e.g., SuperH VOU, whose default value of 20 + * "incidentally" matches ak881x' default + */ + reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3)); + } + + /* Hardware default: NTSC-M */ + ak881x->lines = 480; + + dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n", + data, ak881x->revision); + + return 0; +} + +static int ak881x_remove(struct i2c_client *client) +{ + struct ak881x *ak881x = to_ak881x(client); + + v4l2_device_unregister_subdev(&ak881x->subdev); + kfree(ak881x); + + return 0; +} + +static const struct i2c_device_id ak881x_id[] = { + { "ak8813", 0 }, + { "ak8814", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ak881x_id); + +static struct i2c_driver ak881x_i2c_driver = { + .driver = { + .name = "ak881x", + }, + .probe = ak881x_probe, + .remove = ak881x_remove, + .id_table = ak881x_id, +}; + +module_i2c_driver(ak881x_i2c_driver); + +MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/aptina-pll.c b/drivers/media/i2c/aptina-pll.c new file mode 100644 index 000000000000..8153a449846b --- /dev/null +++ b/drivers/media/i2c/aptina-pll.c @@ -0,0 +1,173 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/gcd.h> +#include <linux/kernel.h> +#include <linux/lcm.h> +#include <linux/module.h> + +#include "aptina-pll.h" + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll) +{ + unsigned int mf_min; + unsigned int mf_max; + unsigned int p1_min; + unsigned int p1_max; + unsigned int p1; + unsigned int div; + + dev_dbg(dev, "PLL: ext clock %u pix clock %u\n", + pll->ext_clock, pll->pix_clock); + + if (pll->ext_clock < limits->ext_clock_min || + pll->ext_clock > limits->ext_clock_max) { + dev_err(dev, "pll: invalid external clock frequency.\n"); + return -EINVAL; + } + + if (pll->pix_clock == 0 || pll->pix_clock > limits->pix_clock_max) { + dev_err(dev, "pll: invalid pixel clock frequency.\n"); + return -EINVAL; + } + + /* Compute the multiplier M and combined N*P1 divisor. */ + div = gcd(pll->pix_clock, pll->ext_clock); + pll->m = pll->pix_clock / div; + div = pll->ext_clock / div; + + /* We now have the smallest M and N*P1 values that will result in the + * desired pixel clock frequency, but they might be out of the valid + * range. Compute the factor by which we should multiply them given the + * following constraints: + * + * - minimum/maximum multiplier + * - minimum/maximum multiplier output clock frequency assuming the + * minimum/maximum N value + * - minimum/maximum combined N*P1 divisor + */ + mf_min = DIV_ROUND_UP(limits->m_min, pll->m); + mf_min = max(mf_min, limits->out_clock_min / + (pll->ext_clock / limits->n_min * pll->m)); + mf_min = max(mf_min, limits->n_min * limits->p1_min / div); + mf_max = limits->m_max / pll->m; + mf_max = min(mf_max, limits->out_clock_max / + (pll->ext_clock / limits->n_max * pll->m)); + mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div)); + + dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max); + if (mf_min > mf_max) { + dev_err(dev, "pll: no valid combined N*P1 divisor.\n"); + return -EINVAL; + } + + /* + * We're looking for the highest acceptable P1 value for which a + * multiplier factor MF exists that fulfills the following conditions: + * + * 1. p1 is in the [p1_min, p1_max] range given by the limits and is + * even + * 2. mf is in the [mf_min, mf_max] range computed above + * 3. div * mf is a multiple of p1, in order to compute + * n = div * mf / p1 + * m = pll->m * mf + * 4. the internal clock frequency, given by ext_clock / n, is in the + * [int_clock_min, int_clock_max] range given by the limits + * 5. the output clock frequency, given by ext_clock / n * m, is in the + * [out_clock_min, out_clock_max] range given by the limits + * + * The first naive approach is to iterate over all p1 values acceptable + * according to (1) and all mf values acceptable according to (2), and + * stop at the first combination that fulfills (3), (4) and (5). This + * has a O(n^2) complexity. + * + * Instead of iterating over all mf values in the [mf_min, mf_max] range + * we can compute the mf increment between two acceptable values + * according to (3) with + * + * mf_inc = p1 / gcd(div, p1) (6) + * + * and round the minimum up to the nearest multiple of mf_inc. This will + * restrict the number of mf values to be checked. + * + * Furthermore, conditions (4) and (5) only restrict the range of + * acceptable p1 and mf values by modifying the minimum and maximum + * limits. (5) can be expressed as + * + * ext_clock / (div * mf / p1) * m * mf >= out_clock_min + * ext_clock / (div * mf / p1) * m * mf <= out_clock_max + * + * or + * + * p1 >= out_clock_min * div / (ext_clock * m) (7) + * p1 <= out_clock_max * div / (ext_clock * m) + * + * Similarly, (4) can be expressed as + * + * mf >= ext_clock * p1 / (int_clock_max * div) (8) + * mf <= ext_clock * p1 / (int_clock_min * div) + * + * We can thus iterate over the restricted p1 range defined by the + * combination of (1) and (7), and then compute the restricted mf range + * defined by the combination of (2), (6) and (8). If the resulting mf + * range is not empty, any value in the mf range is acceptable. We thus + * select the mf lwoer bound and the corresponding p1 value. + */ + if (limits->p1_min == 0) { + dev_err(dev, "pll: P1 minimum value must be >0.\n"); + return -EINVAL; + } + + p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div, + pll->ext_clock * pll->m)); + p1_max = min(limits->p1_max, limits->out_clock_max * div / + (pll->ext_clock * pll->m)); + + for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) { + unsigned int mf_inc = p1 / gcd(div, p1); + unsigned int mf_high; + unsigned int mf_low; + + mf_low = roundup(max(mf_min, DIV_ROUND_UP(pll->ext_clock * p1, + limits->int_clock_max * div)), mf_inc); + mf_high = min(mf_max, pll->ext_clock * p1 / + (limits->int_clock_min * div)); + + if (mf_low > mf_high) + continue; + + pll->n = div * mf_low / p1; + pll->m *= mf_low; + pll->p1 = p1; + dev_dbg(dev, "PLL: N %u M %u P1 %u\n", pll->n, pll->m, pll->p1); + return 0; + } + + dev_err(dev, "pll: no valid N and P1 divisors found.\n"); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(aptina_pll_calculate); + +MODULE_DESCRIPTION("Aptina PLL Helpers"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/aptina-pll.h b/drivers/media/i2c/aptina-pll.h new file mode 100644 index 000000000000..b370e341e75d --- /dev/null +++ b/drivers/media/i2c/aptina-pll.h @@ -0,0 +1,56 @@ +/* + * Aptina Sensor PLL Configuration + * + * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __APTINA_PLL_H +#define __APTINA_PLL_H + +struct aptina_pll { + unsigned int ext_clock; + unsigned int pix_clock; + + unsigned int n; + unsigned int m; + unsigned int p1; +}; + +struct aptina_pll_limits { + unsigned int ext_clock_min; + unsigned int ext_clock_max; + unsigned int int_clock_min; + unsigned int int_clock_max; + unsigned int out_clock_min; + unsigned int out_clock_max; + unsigned int pix_clock_max; + + unsigned int n_min; + unsigned int n_max; + unsigned int m_min; + unsigned int m_max; + unsigned int p1_min; + unsigned int p1_max; +}; + +struct device; + +int aptina_pll_calculate(struct device *dev, + const struct aptina_pll_limits *limits, + struct aptina_pll *pll); + +#endif /* __APTINA_PLL_H */ diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c new file mode 100644 index 000000000000..3bfdbf9d9bf1 --- /dev/null +++ b/drivers/media/i2c/as3645a.c @@ -0,0 +1,888 @@ +/* + * drivers/media/i2c/as3645a.c - AS3645A and LM3555 flash controllers driver + * + * Copyright (C) 2008-2011 Nokia Corporation + * Copyright (c) 2011, Intel Corporation. + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * TODO: + * - Check hardware FSTROBE control when sensor driver add support for this + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <media/as3645a.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> + +#define AS_TIMER_MS_TO_CODE(t) (((t) - 100) / 50) +#define AS_TIMER_CODE_TO_MS(c) (50 * (c) + 100) + +/* Register definitions */ + +/* Read-only Design info register: Reset state: xxxx 0001 */ +#define AS_DESIGN_INFO_REG 0x00 +#define AS_DESIGN_INFO_FACTORY(x) (((x) >> 4)) +#define AS_DESIGN_INFO_MODEL(x) ((x) & 0x0f) + +/* Read-only Version control register: Reset state: 0000 0000 + * for first engineering samples + */ +#define AS_VERSION_CONTROL_REG 0x01 +#define AS_VERSION_CONTROL_RFU(x) (((x) >> 4)) +#define AS_VERSION_CONTROL_VERSION(x) ((x) & 0x0f) + +/* Read / Write (Indicator and timer register): Reset state: 0000 1111 */ +#define AS_INDICATOR_AND_TIMER_REG 0x02 +#define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT 0 +#define AS_INDICATOR_AND_TIMER_VREF_SHIFT 4 +#define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT 6 + +/* Read / Write (Current set register): Reset state: 0110 1001 */ +#define AS_CURRENT_SET_REG 0x03 +#define AS_CURRENT_ASSIST_LIGHT_SHIFT 0 +#define AS_CURRENT_LED_DET_ON (1 << 3) +#define AS_CURRENT_FLASH_CURRENT_SHIFT 4 + +/* Read / Write (Control register): Reset state: 1011 0100 */ +#define AS_CONTROL_REG 0x04 +#define AS_CONTROL_MODE_SETTING_SHIFT 0 +#define AS_CONTROL_STROBE_ON (1 << 2) +#define AS_CONTROL_OUT_ON (1 << 3) +#define AS_CONTROL_EXT_TORCH_ON (1 << 4) +#define AS_CONTROL_STROBE_TYPE_EDGE (0 << 5) +#define AS_CONTROL_STROBE_TYPE_LEVEL (1 << 5) +#define AS_CONTROL_COIL_PEAK_SHIFT 6 + +/* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */ +#define AS_FAULT_INFO_REG 0x05 +#define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT (1 << 1) +#define AS_FAULT_INFO_INDICATOR_LED (1 << 2) +#define AS_FAULT_INFO_LED_AMOUNT (1 << 3) +#define AS_FAULT_INFO_TIMEOUT (1 << 4) +#define AS_FAULT_INFO_OVER_TEMPERATURE (1 << 5) +#define AS_FAULT_INFO_SHORT_CIRCUIT (1 << 6) +#define AS_FAULT_INFO_OVER_VOLTAGE (1 << 7) + +/* Boost register */ +#define AS_BOOST_REG 0x0d +#define AS_BOOST_CURRENT_DISABLE (0 << 0) +#define AS_BOOST_CURRENT_ENABLE (1 << 0) + +/* Password register is used to unlock boost register writing */ +#define AS_PASSWORD_REG 0x0f +#define AS_PASSWORD_UNLOCK_VALUE 0x55 + +enum as_mode { + AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT, + AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT, +}; + +/* + * struct as3645a + * + * @subdev: V4L2 subdev + * @pdata: Flash platform data + * @power_lock: Protects power_count + * @power_count: Power reference count + * @led_mode: V4L2 flash LED mode + * @timeout: Flash timeout in microseconds + * @flash_current: Flash current (0=200mA ... 15=500mA). Maximum + * values are 400mA for two LEDs and 500mA for one LED. + * @assist_current: Torch/Assist light current (0=20mA, 1=40mA ... 7=160mA) + * @indicator_current: Indicator LED current (0=0mA, 1=2.5mA ... 4=10mA) + * @strobe_source: Flash strobe source (software or external) + */ +struct as3645a { + struct v4l2_subdev subdev; + const struct as3645a_platform_data *pdata; + + struct mutex power_lock; + int power_count; + + /* Controls */ + struct v4l2_ctrl_handler ctrls; + + enum v4l2_flash_led_mode led_mode; + unsigned int timeout; + u8 flash_current; + u8 assist_current; + u8 indicator_current; + enum v4l2_flash_strobe_source strobe_source; +}; + +#define to_as3645a(sd) container_of(sd, struct as3645a, subdev) + +/* Return negative errno else zero on success */ +static int as3645a_write(struct as3645a *flash, u8 addr, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + rval = i2c_smbus_write_byte_data(client, addr, val); + + dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val, + rval < 0 ? "fail" : "ok"); + + return rval; +} + +/* Return negative errno else a data byte received from the device. */ +static int as3645a_read(struct as3645a *flash, u8 addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + rval = i2c_smbus_read_byte_data(client, addr); + + dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval, + rval < 0 ? "fail" : "ok"); + + return rval; +} + +/* ----------------------------------------------------------------------------- + * Hardware configuration and trigger + */ + +/* + * as3645a_set_config - Set flash configuration registers + * @flash: The flash + * + * Configure the hardware with flash, assist and indicator currents, as well as + * flash timeout. + * + * Return 0 on success, or a negative error code if an I2C communication error + * occurred. + */ +static int as3645a_set_config(struct as3645a *flash) +{ + int ret; + u8 val; + + val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT) + | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT) + | AS_CURRENT_LED_DET_ON; + + ret = as3645a_write(flash, AS_CURRENT_SET_REG, val); + if (ret < 0) + return ret; + + val = AS_TIMER_MS_TO_CODE(flash->timeout / 1000) + << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT; + + val |= (flash->pdata->vref << AS_INDICATOR_AND_TIMER_VREF_SHIFT) + | ((flash->indicator_current ? flash->indicator_current - 1 : 0) + << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT); + + return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val); +} + +/* + * as3645a_set_control - Set flash control register + * @flash: The flash + * @mode: Desired output mode + * @on: Desired output state + * + * Configure the hardware with output mode and state. + * + * Return 0 on success, or a negative error code if an I2C communication error + * occurred. + */ +static int +as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on) +{ + u8 reg; + + /* Configure output parameters and operation mode. */ + reg = (flash->pdata->peak << AS_CONTROL_COIL_PEAK_SHIFT) + | (on ? AS_CONTROL_OUT_ON : 0) + | mode; + + if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH && + flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) { + reg |= AS_CONTROL_STROBE_TYPE_LEVEL + | AS_CONTROL_STROBE_ON; + } + + return as3645a_write(flash, AS_CONTROL_REG, reg); +} + +/* + * as3645a_set_output - Configure output and operation mode + * @flash: Flash controller + * @strobe: Strobe the flash (only valid in flash mode) + * + * Turn the LEDs output on/off and set the operation mode based on the current + * parameters. + * + * The AS3645A can't control the indicator LED independently of the flash/torch + * LED. If the flash controller is in V4L2_FLASH_LED_MODE_NONE mode, set the + * chip to indicator mode. Otherwise set it to assist light (torch) or flash + * mode. + * + * In indicator and assist modes, turn the output on/off based on the indicator + * and torch currents. In software strobe flash mode, turn the output on/off + * based on the strobe parameter. + */ +static int as3645a_set_output(struct as3645a *flash, bool strobe) +{ + enum as_mode mode; + bool on; + + switch (flash->led_mode) { + case V4L2_FLASH_LED_MODE_NONE: + on = flash->indicator_current != 0; + mode = AS_MODE_INDICATOR; + break; + case V4L2_FLASH_LED_MODE_TORCH: + on = true; + mode = AS_MODE_ASSIST; + break; + case V4L2_FLASH_LED_MODE_FLASH: + on = strobe; + mode = AS_MODE_FLASH; + break; + default: + BUG(); + } + + /* Configure output parameters and operation mode. */ + return as3645a_set_control(flash, mode, on); +} + +/* ----------------------------------------------------------------------------- + * V4L2 controls + */ + +static int as3645a_is_active(struct as3645a *flash) +{ + int ret; + + ret = as3645a_read(flash, AS_CONTROL_REG); + return ret < 0 ? ret : !!(ret & AS_CONTROL_OUT_ON); +} + +static int as3645a_read_fault(struct as3645a *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + /* NOTE: reading register clear fault status */ + rval = as3645a_read(flash, AS_FAULT_INFO_REG); + if (rval < 0) + return rval; + + if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) + dev_dbg(&client->dev, "Inductor Peak limit fault\n"); + + if (rval & AS_FAULT_INFO_INDICATOR_LED) + dev_dbg(&client->dev, "Indicator LED fault: " + "Short circuit or open loop\n"); + + dev_dbg(&client->dev, "%u connected LEDs\n", + rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1); + + if (rval & AS_FAULT_INFO_TIMEOUT) + dev_dbg(&client->dev, "Timeout fault\n"); + + if (rval & AS_FAULT_INFO_OVER_TEMPERATURE) + dev_dbg(&client->dev, "Over temperature fault\n"); + + if (rval & AS_FAULT_INFO_SHORT_CIRCUIT) + dev_dbg(&client->dev, "Short circuit fault\n"); + + if (rval & AS_FAULT_INFO_OVER_VOLTAGE) + dev_dbg(&client->dev, "Over voltage fault: " + "Indicates missing capacitor or open connection\n"); + + return rval; +} + +static int as3645a_get_ctrl(struct v4l2_ctrl *ctrl) +{ + struct as3645a *flash = + container_of(ctrl->handler, struct as3645a, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int value; + + switch (ctrl->id) { + case V4L2_CID_FLASH_FAULT: + value = as3645a_read_fault(flash); + if (value < 0) + return value; + + ctrl->cur.val = 0; + if (value & AS_FAULT_INFO_SHORT_CIRCUIT) + ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (value & AS_FAULT_INFO_OVER_TEMPERATURE) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (value & AS_FAULT_INFO_TIMEOUT) + ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; + if (value & AS_FAULT_INFO_OVER_VOLTAGE) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; + if (value & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_CURRENT; + if (value & AS_FAULT_INFO_INDICATOR_LED) + ctrl->cur.val |= V4L2_FLASH_FAULT_INDICATOR; + break; + + case V4L2_CID_FLASH_STROBE_STATUS: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { + ctrl->cur.val = 0; + break; + } + + value = as3645a_is_active(flash); + if (value < 0) + return value; + + ctrl->cur.val = value; + break; + } + + dev_dbg(&client->dev, "G_CTRL %08x:%d\n", ctrl->id, ctrl->cur.val); + + return 0; +} + +static int as3645a_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct as3645a *flash = + container_of(ctrl->handler, struct as3645a, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int ret; + + dev_dbg(&client->dev, "S_CTRL %08x:%d\n", ctrl->id, ctrl->val); + + /* If a control that doesn't apply to the current mode is modified, + * we store the value and return immediately. The setting will be + * applied when the LED mode is changed. Otherwise we apply the setting + * immediately. + */ + + switch (ctrl->id) { + case V4L2_CID_FLASH_LED_MODE: + if (flash->indicator_current) + return -EBUSY; + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + flash->led_mode = ctrl->val; + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_STROBE_SOURCE: + flash->strobe_source = ctrl->val; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_STROBE: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + return as3645a_set_output(flash, true); + + case V4L2_CID_FLASH_STROBE_STOP: + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + return as3645a_set_output(flash, false); + + case V4L2_CID_FLASH_TIMEOUT: + flash->timeout = ctrl->val; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_INTENSITY: + flash->flash_current = (ctrl->val - AS3645A_FLASH_INTENSITY_MIN) + / AS3645A_FLASH_INTENSITY_STEP; + + /* Applies to flash mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_TORCH_INTENSITY: + flash->assist_current = + (ctrl->val - AS3645A_TORCH_INTENSITY_MIN) + / AS3645A_TORCH_INTENSITY_STEP; + + /* Applies to torch mode only. */ + if (flash->led_mode != V4L2_FLASH_LED_MODE_TORCH) + break; + + return as3645a_set_config(flash); + + case V4L2_CID_FLASH_INDICATOR_INTENSITY: + if (flash->led_mode != V4L2_FLASH_LED_MODE_NONE) + return -EBUSY; + + flash->indicator_current = + (ctrl->val - AS3645A_INDICATOR_INTENSITY_MIN) + / AS3645A_INDICATOR_INTENSITY_STEP; + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + if ((ctrl->val == 0) == (ctrl->cur.val == 0)) + break; + + return as3645a_set_output(flash, false); + } + + return 0; +} + +static const struct v4l2_ctrl_ops as3645a_ctrl_ops = { + .g_volatile_ctrl = as3645a_get_ctrl, + .s_ctrl = as3645a_set_ctrl, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +/* Put device into know state. */ +static int as3645a_setup(struct as3645a *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int ret; + + /* clear errors */ + ret = as3645a_read(flash, AS_FAULT_INFO_REG); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "Fault info: %02x\n", ret); + + ret = as3645a_set_config(flash); + if (ret < 0) + return ret; + + ret = as3645a_set_output(flash, false); + if (ret < 0) + return ret; + + /* read status */ + ret = as3645a_read_fault(flash); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n", + as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG)); + dev_dbg(&client->dev, "AS_CURRENT_SET_REG: %02x\n", + as3645a_read(flash, AS_CURRENT_SET_REG)); + dev_dbg(&client->dev, "AS_CONTROL_REG: %02x\n", + as3645a_read(flash, AS_CONTROL_REG)); + + return ret & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0; +} + +static int __as3645a_set_power(struct as3645a *flash, int on) +{ + int ret; + + if (!on) + as3645a_set_control(flash, AS_MODE_EXT_TORCH, false); + + if (flash->pdata->set_power) { + ret = flash->pdata->set_power(&flash->subdev, on); + if (ret < 0) + return ret; + } + + if (!on) + return 0; + + ret = as3645a_setup(flash); + if (ret < 0) { + if (flash->pdata->set_power) + flash->pdata->set_power(&flash->subdev, 0); + } + + return ret; +} + +static int as3645a_set_power(struct v4l2_subdev *sd, int on) +{ + struct as3645a *flash = to_as3645a(sd); + int ret = 0; + + mutex_lock(&flash->power_lock); + + if (flash->power_count == !on) { + ret = __as3645a_set_power(flash, !!on); + if (ret < 0) + goto done; + } + + flash->power_count += on ? 1 : -1; + WARN_ON(flash->power_count < 0); + +done: + mutex_unlock(&flash->power_lock); + return ret; +} + +static int as3645a_registered(struct v4l2_subdev *sd) +{ + struct as3645a *flash = to_as3645a(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int rval, man, model, rfu, version; + const char *vendor; + + /* Power up the flash driver and read manufacturer ID, model ID, RFU + * and version. + */ + rval = as3645a_set_power(&flash->subdev, 1); + if (rval < 0) + return rval; + + rval = as3645a_read(flash, AS_DESIGN_INFO_REG); + if (rval < 0) + goto power_off; + + man = AS_DESIGN_INFO_FACTORY(rval); + model = AS_DESIGN_INFO_MODEL(rval); + + rval = as3645a_read(flash, AS_VERSION_CONTROL_REG); + if (rval < 0) + goto power_off; + + rfu = AS_VERSION_CONTROL_RFU(rval); + version = AS_VERSION_CONTROL_VERSION(rval); + + /* Verify the chip model and version. */ + if (model != 0x01 || rfu != 0x00) { + dev_err(&client->dev, "AS3645A not detected " + "(model %d rfu %d)\n", model, rfu); + rval = -ENODEV; + goto power_off; + } + + switch (man) { + case 1: + vendor = "AMS, Austria Micro Systems"; + break; + case 2: + vendor = "ADI, Analog Devices Inc."; + break; + case 3: + vendor = "NSC, National Semiconductor"; + break; + case 4: + vendor = "NXP"; + break; + case 5: + vendor = "TI, Texas Instrument"; + break; + default: + vendor = "Unknown"; + } + + dev_info(&client->dev, "Chip vendor: %s (%d) Version: %d\n", vendor, + man, version); + + rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE); + if (rval < 0) + goto power_off; + + rval = as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE); + if (rval < 0) + goto power_off; + + /* Setup default values. This makes sure that the chip is in a known + * state, in case the power rail can't be controlled. + */ + rval = as3645a_setup(flash); + +power_off: + as3645a_set_power(&flash->subdev, 0); + + return rval; +} + +static int as3645a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return as3645a_set_power(sd, 1); +} + +static int as3645a_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return as3645a_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops as3645a_core_ops = { + .s_power = as3645a_set_power, +}; + +static const struct v4l2_subdev_ops as3645a_ops = { + .core = &as3645a_core_ops, +}; + +static const struct v4l2_subdev_internal_ops as3645a_internal_ops = { + .registered = as3645a_registered, + .open = as3645a_open, + .close = as3645a_close, +}; + +/* ----------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int as3645a_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + int rval; + + if (flash->power_count == 0) + return 0; + + rval = __as3645a_set_power(flash, 0); + + dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok"); + + return rval; +} + +static int as3645a_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + int rval; + + if (flash->power_count == 0) + return 0; + + rval = __as3645a_set_power(flash, 1); + + dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok"); + + return rval; +} + +#else + +#define as3645a_suspend NULL +#define as3645a_resume NULL + +#endif /* CONFIG_PM */ + +/* + * as3645a_init_controls - Create controls + * @flash: The flash + * + * The number of LEDs reported in platform data is used to compute default + * limits. Parameters passed through platform data can override those limits. + */ +static int __devinit as3645a_init_controls(struct as3645a *flash) +{ + const struct as3645a_platform_data *pdata = flash->pdata; + struct v4l2_ctrl *ctrl; + int maximum; + + v4l2_ctrl_handler_init(&flash->ctrls, 10); + + /* V4L2_CID_FLASH_LED_MODE */ + v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_LED_MODE, 2, ~7, + V4L2_FLASH_LED_MODE_NONE); + + /* V4L2_CID_FLASH_STROBE_SOURCE */ + v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_SOURCE, + pdata->ext_strobe ? 1 : 0, + pdata->ext_strobe ? ~3 : ~1, + V4L2_FLASH_STROBE_SOURCE_SOFTWARE); + + flash->strobe_source = V4L2_FLASH_STROBE_SOURCE_SOFTWARE; + + /* V4L2_CID_FLASH_STROBE */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + + /* V4L2_CID_FLASH_STROBE_STOP */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + + /* V4L2_CID_FLASH_STROBE_STATUS */ + ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_STROBE_STATUS, 0, 1, 1, 1); + if (ctrl != NULL) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + /* V4L2_CID_FLASH_TIMEOUT */ + maximum = pdata->timeout_max; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_TIMEOUT, AS3645A_FLASH_TIMEOUT_MIN, + maximum, AS3645A_FLASH_TIMEOUT_STEP, maximum); + + flash->timeout = maximum; + + /* V4L2_CID_FLASH_INTENSITY */ + maximum = pdata->flash_max_current; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_INTENSITY, AS3645A_FLASH_INTENSITY_MIN, + maximum, AS3645A_FLASH_INTENSITY_STEP, maximum); + + flash->flash_current = (maximum - AS3645A_FLASH_INTENSITY_MIN) + / AS3645A_FLASH_INTENSITY_STEP; + + /* V4L2_CID_FLASH_TORCH_INTENSITY */ + maximum = pdata->torch_max_current; + + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_TORCH_INTENSITY, + AS3645A_TORCH_INTENSITY_MIN, maximum, + AS3645A_TORCH_INTENSITY_STEP, + AS3645A_TORCH_INTENSITY_MIN); + + flash->assist_current = 0; + + /* V4L2_CID_FLASH_INDICATOR_INTENSITY */ + v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_INDICATOR_INTENSITY, + AS3645A_INDICATOR_INTENSITY_MIN, + AS3645A_INDICATOR_INTENSITY_MAX, + AS3645A_INDICATOR_INTENSITY_STEP, + AS3645A_INDICATOR_INTENSITY_MIN); + + flash->indicator_current = 0; + + /* V4L2_CID_FLASH_FAULT */ + ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops, + V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE | + V4L2_FLASH_FAULT_TIMEOUT | + V4L2_FLASH_FAULT_OVER_TEMPERATURE | + V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); + if (ctrl != NULL) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + flash->subdev.ctrl_handler = &flash->ctrls; + + return flash->ctrls.error; +} + +static int __devinit as3645a_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct as3645a *flash; + int ret; + + if (client->dev.platform_data == NULL) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(&flash->subdev, client, &as3645a_ops); + flash->subdev.internal_ops = &as3645a_internal_ops; + flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + ret = as3645a_init_controls(flash); + if (ret < 0) + goto done; + + ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + if (ret < 0) + goto done; + + flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + + mutex_init(&flash->power_lock); + + flash->led_mode = V4L2_FLASH_LED_MODE_NONE; + +done: + if (ret < 0) { + v4l2_ctrl_handler_free(&flash->ctrls); + kfree(flash); + } + + return ret; +} + +static int __devexit as3645a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct as3645a *flash = to_as3645a(subdev); + + v4l2_device_unregister_subdev(subdev); + v4l2_ctrl_handler_free(&flash->ctrls); + media_entity_cleanup(&flash->subdev.entity); + mutex_destroy(&flash->power_lock); + kfree(flash); + + return 0; +} + +static const struct i2c_device_id as3645a_id_table[] = { + { AS3645A_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, as3645a_id_table); + +static const struct dev_pm_ops as3645a_pm_ops = { + .suspend = as3645a_suspend, + .resume = as3645a_resume, +}; + +static struct i2c_driver as3645a_i2c_driver = { + .driver = { + .name = AS3645A_NAME, + .pm = &as3645a_pm_ops, + }, + .probe = as3645a_probe, + .remove = __devexit_p(as3645a_remove), + .id_table = as3645a_id_table, +}; + +module_i2c_driver(as3645a_i2c_driver); + +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/bt819.c b/drivers/media/i2c/bt819.c new file mode 100644 index 000000000000..377bf05b1efd --- /dev/null +++ b/drivers/media/i2c/bt819.c @@ -0,0 +1,517 @@ +/* + * bt819 - BT819A VideoStream Decoder (Rockwell Part) + * + * Copyright (C) 1999 Mike Bernson <mike@mlb.org> + * Copyright (C) 1998 Dave Perks <dperks@ibm.net> + * + * Modifications for LML33/DC10plus unified driver + * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + * + * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> + * - moved over to linux>=2.4.x i2c protocol (9/9/2002) + * + * This code was modify/ported from the saa7111 driver written + * by Dave Perks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ioctl.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/bt819.h> + +MODULE_DESCRIPTION("Brooktree-819 video decoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct bt819 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + unsigned char reg[32]; + + v4l2_std_id norm; + int ident; + int input; + int enable; +}; + +static inline struct bt819 *to_bt819(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt819, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct bt819, hdl)->sd; +} + +struct timing { + int hactive; + int hdelay; + int vactive; + int vdelay; + int hscale; + int vscale; +}; + +/* for values, see the bt819 datasheet */ +static struct timing timing_data[] = { + {864 - 24, 20, 625 - 2, 1, 0x0504, 0x0000}, + {858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000}, +}; + +/* ----------------------------------------------------------------------- */ + +static inline int bt819_write(struct bt819 *decoder, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int bt819_setbit(struct bt819 *decoder, u8 reg, u8 bit, u8 value) +{ + return bt819_write(decoder, reg, + (decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0)); +} + +static int bt819_write_block(struct bt819 *decoder, const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd); + int ret = -1; + u8 reg; + + /* the bt819 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = + decoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = bt819_write(decoder, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + + return ret; +} + +static inline int bt819_read(struct bt819 *decoder, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int bt819_init(struct v4l2_subdev *sd) +{ + static unsigned char init[] = { + /*0x1f, 0x00,*/ /* Reset */ + 0x01, 0x59, /* 0x01 input format */ + 0x02, 0x00, /* 0x02 temporal decimation */ + 0x03, 0x12, /* 0x03 Cropping msb */ + 0x04, 0x16, /* 0x04 Vertical Delay, lsb */ + 0x05, 0xe0, /* 0x05 Vertical Active lsb */ + 0x06, 0x80, /* 0x06 Horizontal Delay lsb */ + 0x07, 0xd0, /* 0x07 Horizontal Active lsb */ + 0x08, 0x00, /* 0x08 Horizontal Scaling msb */ + 0x09, 0xf8, /* 0x09 Horizontal Scaling lsb */ + 0x0a, 0x00, /* 0x0a Brightness control */ + 0x0b, 0x30, /* 0x0b Miscellaneous control */ + 0x0c, 0xd8, /* 0x0c Luma Gain lsb */ + 0x0d, 0xfe, /* 0x0d Chroma Gain (U) lsb */ + 0x0e, 0xb4, /* 0x0e Chroma Gain (V) msb */ + 0x0f, 0x00, /* 0x0f Hue control */ + 0x12, 0x04, /* 0x12 Output Format */ + 0x13, 0x20, /* 0x13 Vertial Scaling msb 0x00 + chroma comb OFF, line drop scaling, interlace scaling + BUG? Why does turning the chroma comb on fuck up color? + Bug in the bt819 stepping on my board? + */ + 0x14, 0x00, /* 0x14 Vertial Scaling lsb */ + 0x16, 0x07, /* 0x16 Video Timing Polarity + ACTIVE=active low + FIELD: high=odd, + vreset=active high, + hreset=active high */ + 0x18, 0x68, /* 0x18 AGC Delay */ + 0x19, 0x5d, /* 0x19 Burst Gate Delay */ + 0x1a, 0x80, /* 0x1a ADC Interface */ + }; + + struct bt819 *decoder = to_bt819(sd); + struct timing *timing = &timing_data[(decoder->norm & V4L2_STD_525_60) ? 1 : 0]; + + init[0x03 * 2 - 1] = + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03); + init[0x04 * 2 - 1] = timing->vdelay & 0xff; + init[0x05 * 2 - 1] = timing->vactive & 0xff; + init[0x06 * 2 - 1] = timing->hdelay & 0xff; + init[0x07 * 2 - 1] = timing->hactive & 0xff; + init[0x08 * 2 - 1] = timing->hscale >> 8; + init[0x09 * 2 - 1] = timing->hscale & 0xff; + /* 0x15 in array is address 0x19 */ + init[0x15 * 2 - 1] = (decoder->norm & V4L2_STD_625_50) ? 115 : 93; /* Chroma burst delay */ + /* reset */ + bt819_write(decoder, 0x1f, 0x00); + mdelay(1); + + /* init */ + return bt819_write_block(decoder, init, sizeof(init)); +} + +/* ----------------------------------------------------------------------- */ + +static int bt819_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + struct bt819 *decoder = to_bt819(sd); + int status = bt819_read(decoder, 0x00); + int res = V4L2_IN_ST_NO_SIGNAL; + v4l2_std_id std; + + if ((status & 0x80)) + res = 0; + + if ((status & 0x10)) + std = V4L2_STD_PAL; + else + std = V4L2_STD_NTSC; + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = res; + + v4l2_dbg(1, debug, sd, "get status %x\n", status); + return 0; +} + +static int bt819_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + return bt819_status(sd, NULL, std); +} + +static int bt819_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + return bt819_status(sd, status, NULL); +} + +static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct bt819 *decoder = to_bt819(sd); + struct timing *timing = NULL; + + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL) + v4l2_err(sd, "no notify found!\n"); + + if (std & V4L2_STD_NTSC) { + v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL); + bt819_setbit(decoder, 0x01, 0, 1); + bt819_setbit(decoder, 0x01, 1, 0); + bt819_setbit(decoder, 0x01, 5, 0); + bt819_write(decoder, 0x18, 0x68); + bt819_write(decoder, 0x19, 0x5d); + /* bt819_setbit(decoder, 0x1a, 5, 1); */ + timing = &timing_data[1]; + } else if (std & V4L2_STD_PAL) { + v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL); + bt819_setbit(decoder, 0x01, 0, 1); + bt819_setbit(decoder, 0x01, 1, 1); + bt819_setbit(decoder, 0x01, 5, 1); + bt819_write(decoder, 0x18, 0x7f); + bt819_write(decoder, 0x19, 0x72); + /* bt819_setbit(decoder, 0x1a, 5, 0); */ + timing = &timing_data[0]; + } else { + v4l2_dbg(1, debug, sd, "unsupported norm %llx\n", + (unsigned long long)std); + return -EINVAL; + } + bt819_write(decoder, 0x03, + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03)); + bt819_write(decoder, 0x04, timing->vdelay & 0xff); + bt819_write(decoder, 0x05, timing->vactive & 0xff); + bt819_write(decoder, 0x06, timing->hdelay & 0xff); + bt819_write(decoder, 0x07, timing->hactive & 0xff); + bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff); + bt819_write(decoder, 0x09, timing->hscale & 0xff); + decoder->norm = std; + v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL); + return 0; +} + +static int bt819_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct bt819 *decoder = to_bt819(sd); + + v4l2_dbg(1, debug, sd, "set input %x\n", input); + + if (input > 7) + return -EINVAL; + + if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL) + v4l2_err(sd, "no notify found!\n"); + + if (decoder->input != input) { + v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL); + decoder->input = input; + /* select mode */ + if (decoder->input == 0) { + bt819_setbit(decoder, 0x0b, 6, 0); + bt819_setbit(decoder, 0x1a, 1, 1); + } else { + bt819_setbit(decoder, 0x0b, 6, 1); + bt819_setbit(decoder, 0x1a, 1, 0); + } + v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL); + } + return 0; +} + +static int bt819_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct bt819 *decoder = to_bt819(sd); + + v4l2_dbg(1, debug, sd, "enable output %x\n", enable); + + if (decoder->enable != enable) { + decoder->enable = enable; + bt819_setbit(decoder, 0x16, 7, !enable); + } + return 0; +} + +static int bt819_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct bt819 *decoder = to_bt819(sd); + int temp; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + bt819_write(decoder, 0x0a, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + bt819_write(decoder, 0x0c, ctrl->val & 0xff); + bt819_setbit(decoder, 0x0b, 2, ((ctrl->val >> 8) & 0x01)); + break; + + case V4L2_CID_SATURATION: + bt819_write(decoder, 0x0d, (ctrl->val >> 7) & 0xff); + bt819_setbit(decoder, 0x0b, 1, ((ctrl->val >> 15) & 0x01)); + + /* Ratio between U gain and V gain must stay the same as + the ratio between the default U and V gain values. */ + temp = (ctrl->val * 180) / 254; + bt819_write(decoder, 0x0e, (temp >> 7) & 0xff); + bt819_setbit(decoder, 0x0b, 0, (temp >> 15) & 0x01); + break; + + case V4L2_CID_HUE: + bt819_write(decoder, 0x0f, ctrl->val); + break; + + default: + return -EINVAL; + } + return 0; +} + +static int bt819_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct bt819 *decoder = to_bt819(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops bt819_ctrl_ops = { + .s_ctrl = bt819_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops bt819_core_ops = { + .g_chip_ident = bt819_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = bt819_s_std, +}; + +static const struct v4l2_subdev_video_ops bt819_video_ops = { + .s_routing = bt819_s_routing, + .s_stream = bt819_s_stream, + .querystd = bt819_querystd, + .g_input_status = bt819_g_input_status, +}; + +static const struct v4l2_subdev_ops bt819_ops = { + .core = &bt819_core_ops, + .video = &bt819_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int bt819_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i, ver; + struct bt819 *decoder; + struct v4l2_subdev *sd; + const char *name; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt819_ops); + + ver = bt819_read(decoder, 0x17); + switch (ver & 0xf0) { + case 0x70: + name = "bt819a"; + decoder->ident = V4L2_IDENT_BT819A; + break; + case 0x60: + name = "bt817a"; + decoder->ident = V4L2_IDENT_BT817A; + break; + case 0x20: + name = "bt815a"; + decoder->ident = V4L2_IDENT_BT815A; + break; + default: + v4l2_dbg(1, debug, sd, + "unknown chip version 0x%02x\n", ver); + return -ENODEV; + } + + v4l_info(client, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); + + decoder->norm = V4L2_STD_NTSC; + decoder->input = 0; + decoder->enable = 1; + + i = bt819_init(sd); + if (i < 0) + v4l2_dbg(1, debug, sd, "init status %d\n", i); + + v4l2_ctrl_handler_init(&decoder->hdl, 4); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_CONTRAST, 0, 511, 1, 0xd8); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_SATURATION, 0, 511, 1, 0xfe); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + return 0; +} + +static int bt819_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct bt819 *decoder = to_bt819(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id bt819_id[] = { + { "bt819a", 0 }, + { "bt817a", 0 }, + { "bt815a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt819_id); + +static struct i2c_driver bt819_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bt819", + }, + .probe = bt819_probe, + .remove = bt819_remove, + .id_table = bt819_id, +}; + +module_i2c_driver(bt819_driver); diff --git a/drivers/media/i2c/bt856.c b/drivers/media/i2c/bt856.c new file mode 100644 index 000000000000..7e5bd365c239 --- /dev/null +++ b/drivers/media/i2c/bt856.c @@ -0,0 +1,273 @@ +/* + * bt856 - BT856A Digital Video Encoder (Rockwell Part) + * + * Copyright (C) 1999 Mike Bernson <mike@mlb.org> + * Copyright (C) 1998 Dave Perks <dperks@ibm.net> + * + * Modifications for LML33/DC10plus unified driver + * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + * + * This code was modify/ported from the saa7111 driver written + * by Dave Perks. + * + * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> + * - moved over to linux>=2.4.x i2c protocol (9/9/2002) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Brooktree-856A video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +#define BT856_REG_OFFSET 0xDA +#define BT856_NR_REG 6 + +struct bt856 { + struct v4l2_subdev sd; + unsigned char reg[BT856_NR_REG]; + + v4l2_std_id norm; +}; + +static inline struct bt856 *to_bt856(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt856, sd); +} + +/* ----------------------------------------------------------------------- */ + +static inline int bt856_write(struct bt856 *encoder, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); + + encoder->reg[reg - BT856_REG_OFFSET] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int bt856_setbit(struct bt856 *encoder, u8 reg, u8 bit, u8 value) +{ + return bt856_write(encoder, reg, + (encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) | + (value ? (1 << bit) : 0)); +} + +static void bt856_dump(struct bt856 *encoder) +{ + int i; + + v4l2_info(&encoder->sd, "register dump:\n"); + for (i = 0; i < BT856_NR_REG; i += 2) + printk(KERN_CONT " %02x", encoder->reg[i]); + printk(KERN_CONT "\n"); +} + +/* ----------------------------------------------------------------------- */ + +static int bt856_init(struct v4l2_subdev *sd, u32 arg) +{ + struct bt856 *encoder = to_bt856(sd); + + /* This is just for testing!!! */ + v4l2_dbg(1, debug, sd, "init\n"); + bt856_write(encoder, 0xdc, 0x18); + bt856_write(encoder, 0xda, 0); + bt856_write(encoder, 0xde, 0); + + bt856_setbit(encoder, 0xdc, 3, 1); + /*bt856_setbit(encoder, 0xdc, 6, 0);*/ + bt856_setbit(encoder, 0xdc, 4, 1); + + if (encoder->norm & V4L2_STD_NTSC) + bt856_setbit(encoder, 0xdc, 2, 0); + else + bt856_setbit(encoder, 0xdc, 2, 1); + + bt856_setbit(encoder, 0xdc, 1, 1); + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct bt856 *encoder = to_bt856(sd); + + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + if (std & V4L2_STD_NTSC) { + bt856_setbit(encoder, 0xdc, 2, 0); + } else if (std & V4L2_STD_PAL) { + bt856_setbit(encoder, 0xdc, 2, 1); + bt856_setbit(encoder, 0xda, 0, 0); + /*bt856_setbit(encoder, 0xda, 0, 1);*/ + } else { + return -EINVAL; + } + encoder->norm = std; + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct bt856 *encoder = to_bt856(sd); + + v4l2_dbg(1, debug, sd, "set input %d\n", input); + + /* We only have video bus. + * input= 0: input is from bt819 + * input= 1: input is from ZR36060 */ + switch (input) { + case 0: + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + bt856_setbit(encoder, 0xdc, 3, 1); + bt856_setbit(encoder, 0xdc, 6, 0); + break; + case 1: + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + bt856_setbit(encoder, 0xdc, 3, 1); + bt856_setbit(encoder, 0xdc, 6, 1); + break; + case 2: /* Color bar */ + bt856_setbit(encoder, 0xdc, 3, 0); + bt856_setbit(encoder, 0xde, 4, 1); + break; + default: + return -EINVAL; + } + + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT856, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops bt856_core_ops = { + .g_chip_ident = bt856_g_chip_ident, + .init = bt856_init, +}; + +static const struct v4l2_subdev_video_ops bt856_video_ops = { + .s_std_output = bt856_s_std_output, + .s_routing = bt856_s_routing, +}; + +static const struct v4l2_subdev_ops bt856_ops = { + .core = &bt856_core_ops, + .video = &bt856_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int bt856_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bt856 *encoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt856_ops); + encoder->norm = V4L2_STD_NTSC; + + bt856_write(encoder, 0xdc, 0x18); + bt856_write(encoder, 0xda, 0); + bt856_write(encoder, 0xde, 0); + + bt856_setbit(encoder, 0xdc, 3, 1); + /*bt856_setbit(encoder, 0xdc, 6, 0);*/ + bt856_setbit(encoder, 0xdc, 4, 1); + + if (encoder->norm & V4L2_STD_NTSC) + bt856_setbit(encoder, 0xdc, 2, 0); + else + bt856_setbit(encoder, 0xdc, 2, 1); + + bt856_setbit(encoder, 0xdc, 1, 1); + bt856_setbit(encoder, 0xde, 4, 0); + bt856_setbit(encoder, 0xde, 3, 1); + + if (debug != 0) + bt856_dump(encoder); + return 0; +} + +static int bt856_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_bt856(sd)); + return 0; +} + +static const struct i2c_device_id bt856_id[] = { + { "bt856", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt856_id); + +static struct i2c_driver bt856_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bt856", + }, + .probe = bt856_probe, + .remove = bt856_remove, + .id_table = bt856_id, +}; + +module_i2c_driver(bt856_driver); diff --git a/drivers/media/i2c/bt866.c b/drivers/media/i2c/bt866.c new file mode 100644 index 000000000000..905320b67a1c --- /dev/null +++ b/drivers/media/i2c/bt866.c @@ -0,0 +1,243 @@ +/* + bt866 - BT866 Digital Video Encoder (Rockwell Part) + + Copyright (C) 1999 Mike Bernson <mike@mlb.org> + Copyright (C) 1998 Dave Perks <dperks@ibm.net> + + Modifications for LML33/DC10plus unified driver + Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + + This code was modify/ported from the saa7111 driver written + by Dave Perks. + + This code was adapted for the bt866 by Christer Weinigel and ported + to 2.6 by Martin Samuelsson. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct bt866 { + struct v4l2_subdev sd; + u8 reg[256]; +}; + +static inline struct bt866 *to_bt866(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt866, sd); +} + +static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); + u8 buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data); + + for (err = 0; err < 3;) { + if (i2c_master_send(client, buffer, 2) == 2) + break; + err++; + v4l_warn(client, "error #%d writing to 0x%02x\n", + err, subaddr); + schedule_timeout_interruptible(msecs_to_jiffies(100)); + } + if (err == 3) { + v4l_warn(client, "giving up\n"); + return -1; + } + + return 0; +} + +static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + /* Only PAL supported by this driver at the moment! */ + if (!(std & V4L2_STD_NTSC)) + return -EINVAL; + return 0; +} + +static int bt866_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + static const __u8 init[] = { + 0xc8, 0xcc, /* CRSCALE */ + 0xca, 0x91, /* CBSCALE */ + 0xcc, 0x24, /* YC16 | OSDNUM */ + 0xda, 0x00, /* */ + 0xdc, 0x24, /* SETMODE | PAL */ + 0xde, 0x02, /* EACTIVE */ + + /* overlay colors */ + 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ + 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ + 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ + 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ + 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ + 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ + 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ + 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ + + 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ + 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ + 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ + 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ + 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ + 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ + 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ + 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ + }; + struct bt866 *encoder = to_bt866(sd); + u8 val; + int i; + + for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) + bt866_write(encoder, init[i], init[i+1]); + + val = encoder->reg[0xdc]; + + if (input == 0) + val |= 0x40; /* CBSWAP */ + else + val &= ~0x40; /* !CBSWAP */ + + bt866_write(encoder, 0xdc, val); + + val = encoder->reg[0xcc]; + if (input == 2) + val |= 0x01; /* OSDBAR */ + else + val &= ~0x01; /* !OSDBAR */ + bt866_write(encoder, 0xcc, val); + + v4l2_dbg(1, debug, sd, "set input %d\n", input); + + switch (input) { + case 0: + case 1: + case 2: + break; + default: + return -EINVAL; + } + return 0; +} + +#if 0 +/* Code to setup square pixels, might be of some use in the future, + but is currently unused. */ + val = encoder->reg[0xdc]; + if (*iarg) + val |= 1; /* SQUARE */ + else + val &= ~1; /* !SQUARE */ + bt866_write(client, 0xdc, val); +#endif + +static int bt866_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT866, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops bt866_core_ops = { + .g_chip_ident = bt866_g_chip_ident, +}; + +static const struct v4l2_subdev_video_ops bt866_video_ops = { + .s_std_output = bt866_s_std_output, + .s_routing = bt866_s_routing, +}; + +static const struct v4l2_subdev_ops bt866_ops = { + .core = &bt866_core_ops, + .video = &bt866_video_ops, +}; + +static int bt866_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bt866 *encoder; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt866_ops); + return 0; +} + +static int bt866_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_bt866(sd)); + return 0; +} + +static const struct i2c_device_id bt866_id[] = { + { "bt866", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt866_id); + +static struct i2c_driver bt866_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "bt866", + }, + .probe = bt866_probe, + .remove = bt866_remove, + .id_table = bt866_id, +}; + +module_i2c_driver(bt866_driver); diff --git a/drivers/media/i2c/btcx-risc.c b/drivers/media/i2c/btcx-risc.c new file mode 100644 index 000000000000..ac1b2687a20d --- /dev/null +++ b/drivers/media/i2c/btcx-risc.c @@ -0,0 +1,260 @@ +/* + + btcx-risc.c + + bt848/bt878/cx2388x risc code generator. + + (c) 2000-03 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/videodev2.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +#include "btcx-risc.h" + +MODULE_DESCRIPTION("some code shared by bttv and cx88xx drivers"); +MODULE_AUTHOR("Gerd Knorr"); +MODULE_LICENSE("GPL"); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"debug messages, default is 0 (no)"); + +/* ---------------------------------------------------------- */ +/* allocate/free risc memory */ + +static int memcnt; + +void btcx_riscmem_free(struct pci_dev *pci, + struct btcx_riscmem *risc) +{ + if (NULL == risc->cpu) + return; + if (debug) { + memcnt--; + printk("btcx: riscmem free [%d] dma=%lx\n", + memcnt, (unsigned long)risc->dma); + } + pci_free_consistent(pci, risc->size, risc->cpu, risc->dma); + memset(risc,0,sizeof(*risc)); +} + +int btcx_riscmem_alloc(struct pci_dev *pci, + struct btcx_riscmem *risc, + unsigned int size) +{ + __le32 *cpu; + dma_addr_t dma = 0; + + if (NULL != risc->cpu && risc->size < size) + btcx_riscmem_free(pci,risc); + if (NULL == risc->cpu) { + cpu = pci_alloc_consistent(pci, size, &dma); + if (NULL == cpu) + return -ENOMEM; + risc->cpu = cpu; + risc->dma = dma; + risc->size = size; + if (debug) { + memcnt++; + printk("btcx: riscmem alloc [%d] dma=%lx cpu=%p size=%d\n", + memcnt, (unsigned long)dma, cpu, size); + } + } + memset(risc->cpu,0,risc->size); + return 0; +} + +/* ---------------------------------------------------------- */ +/* screen overlay helpers */ + +int +btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win, + struct v4l2_clip *clips, unsigned int n) +{ + if (win->left < 0) { + /* left */ + clips[n].c.left = 0; + clips[n].c.top = 0; + clips[n].c.width = -win->left; + clips[n].c.height = win->height; + n++; + } + if (win->left + win->width > swidth) { + /* right */ + clips[n].c.left = swidth - win->left; + clips[n].c.top = 0; + clips[n].c.width = win->width - clips[n].c.left; + clips[n].c.height = win->height; + n++; + } + if (win->top < 0) { + /* top */ + clips[n].c.left = 0; + clips[n].c.top = 0; + clips[n].c.width = win->width; + clips[n].c.height = -win->top; + n++; + } + if (win->top + win->height > sheight) { + /* bottom */ + clips[n].c.left = 0; + clips[n].c.top = sheight - win->top; + clips[n].c.width = win->width; + clips[n].c.height = win->height - clips[n].c.top; + n++; + } + return n; +} + +int +btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips, unsigned int n, int mask) +{ + s32 nx,nw,dx; + unsigned int i; + + /* fixup window */ + nx = (win->left + mask) & ~mask; + nw = (win->width) & ~mask; + if (nx + nw > win->left + win->width) + nw -= mask+1; + dx = nx - win->left; + win->left = nx; + win->width = nw; + if (debug) + printk(KERN_DEBUG "btcx: window align %dx%d+%d+%d [dx=%d]\n", + win->width, win->height, win->left, win->top, dx); + + /* fixup clips */ + for (i = 0; i < n; i++) { + nx = (clips[i].c.left-dx) & ~mask; + nw = (clips[i].c.width) & ~mask; + if (nx + nw < clips[i].c.left-dx + clips[i].c.width) + nw += mask+1; + clips[i].c.left = nx; + clips[i].c.width = nw; + if (debug) + printk(KERN_DEBUG "btcx: clip align %dx%d+%d+%d\n", + clips[i].c.width, clips[i].c.height, + clips[i].c.left, clips[i].c.top); + } + return 0; +} + +void +btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips) +{ + struct v4l2_clip swap; + int i,j,n; + + if (nclips < 2) + return; + for (i = nclips-2; i >= 0; i--) { + for (n = 0, j = 0; j <= i; j++) { + if (clips[j].c.left > clips[j+1].c.left) { + swap = clips[j]; + clips[j] = clips[j+1]; + clips[j+1] = swap; + n++; + } + } + if (0 == n) + break; + } +} + +void +btcx_calc_skips(int line, int width, int *maxy, + struct btcx_skiplist *skips, unsigned int *nskips, + const struct v4l2_clip *clips, unsigned int nclips) +{ + unsigned int clip,skip; + int end, maxline; + + skip=0; + maxline = 9999; + for (clip = 0; clip < nclips; clip++) { + + /* sanity checks */ + if (clips[clip].c.left + clips[clip].c.width <= 0) + continue; + if (clips[clip].c.left > (signed)width) + break; + + /* vertical range */ + if (line > clips[clip].c.top+clips[clip].c.height-1) + continue; + if (line < clips[clip].c.top) { + if (maxline > clips[clip].c.top-1) + maxline = clips[clip].c.top-1; + continue; + } + if (maxline > clips[clip].c.top+clips[clip].c.height-1) + maxline = clips[clip].c.top+clips[clip].c.height-1; + + /* horizontal range */ + if (0 == skip || clips[clip].c.left > skips[skip-1].end) { + /* new one */ + skips[skip].start = clips[clip].c.left; + if (skips[skip].start < 0) + skips[skip].start = 0; + skips[skip].end = clips[clip].c.left + clips[clip].c.width; + if (skips[skip].end > width) + skips[skip].end = width; + skip++; + } else { + /* overlaps -- expand last one */ + end = clips[clip].c.left + clips[clip].c.width; + if (skips[skip-1].end < end) + skips[skip-1].end = end; + if (skips[skip-1].end > width) + skips[skip-1].end = width; + } + } + *nskips = skip; + *maxy = maxline; + + if (debug) { + printk(KERN_DEBUG "btcx: skips line %d-%d:",line,maxline); + for (skip = 0; skip < *nskips; skip++) { + printk(" %d-%d",skips[skip].start,skips[skip].end); + } + printk("\n"); + } +} + +/* ---------------------------------------------------------- */ + +EXPORT_SYMBOL(btcx_riscmem_alloc); +EXPORT_SYMBOL(btcx_riscmem_free); + +EXPORT_SYMBOL(btcx_screen_clips); +EXPORT_SYMBOL(btcx_align); +EXPORT_SYMBOL(btcx_sort_clips); +EXPORT_SYMBOL(btcx_calc_skips); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/i2c/btcx-risc.h b/drivers/media/i2c/btcx-risc.h new file mode 100644 index 000000000000..f8bc6e8e7b51 --- /dev/null +++ b/drivers/media/i2c/btcx-risc.h @@ -0,0 +1,34 @@ +/* + */ +struct btcx_riscmem { + unsigned int size; + __le32 *cpu; + __le32 *jmp; + dma_addr_t dma; +}; + +struct btcx_skiplist { + int start; + int end; +}; + +int btcx_riscmem_alloc(struct pci_dev *pci, + struct btcx_riscmem *risc, + unsigned int size); +void btcx_riscmem_free(struct pci_dev *pci, + struct btcx_riscmem *risc); + +int btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win, + struct v4l2_clip *clips, unsigned int n); +int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips, + unsigned int n, int mask); +void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips); +void btcx_calc_skips(int line, int width, int *maxy, + struct btcx_skiplist *skips, unsigned int *nskips, + const struct v4l2_clip *clips, unsigned int nclips); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/i2c/cs5345.c b/drivers/media/i2c/cs5345.c new file mode 100644 index 000000000000..c8581e26fa9c --- /dev/null +++ b/drivers/media/i2c/cs5345.c @@ -0,0 +1,252 @@ +/* + * cs5345 Cirrus Logic 24-bit, 192 kHz Stereo Audio ADC + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static bool debug; + +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); + +struct cs5345_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct cs5345_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cs5345_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cs5345_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +static inline int cs5345_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int cs5345_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int cs5345_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + if ((input & 0xf) > 6) { + v4l2_err(sd, "Invalid input %d.\n", input); + return -EINVAL; + } + cs5345_write(sd, 0x09, input & 0xf); + cs5345_write(sd, 0x05, input & 0xf0); + return 0; +} + +static int cs5345_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + cs5345_write(sd, 0x04, ctrl->val ? 0x80 : 0); + return 0; + case V4L2_CID_AUDIO_VOLUME: + cs5345_write(sd, 0x07, ((u8)ctrl->val) & 0x3f); + cs5345_write(sd, 0x08, ((u8)ctrl->val) & 0x3f); + return 0; + } + return -EINVAL; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cs5345_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 1; + reg->val = cs5345_read(sd, reg->reg & 0x1f); + return 0; +} + +static int cs5345_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cs5345_write(sd, reg->reg & 0x1f, reg->val & 0xff); + return 0; +} +#endif + +static int cs5345_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_CS5345, 0); +} + +static int cs5345_log_status(struct v4l2_subdev *sd) +{ + u8 v = cs5345_read(sd, 0x09) & 7; + u8 m = cs5345_read(sd, 0x04); + int vol = cs5345_read(sd, 0x08) & 0x3f; + + v4l2_info(sd, "Input: %d%s\n", v, + (m & 0x80) ? " (muted)" : ""); + if (vol >= 32) + vol = vol - 64; + v4l2_info(sd, "Volume: %d dB\n", vol); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops cs5345_ctrl_ops = { + .s_ctrl = cs5345_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cs5345_core_ops = { + .log_status = cs5345_log_status, + .g_chip_ident = cs5345_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cs5345_g_register, + .s_register = cs5345_s_register, +#endif +}; + +static const struct v4l2_subdev_audio_ops cs5345_audio_ops = { + .s_routing = cs5345_s_routing, +}; + +static const struct v4l2_subdev_ops cs5345_ops = { + .core = &cs5345_core_ops, + .audio = &cs5345_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int cs5345_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cs5345_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct cs5345_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &cs5345_ops); + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, -24, 24, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + /* set volume/mute */ + v4l2_ctrl_handler_setup(&state->hdl); + + cs5345_write(sd, 0x02, 0x00); + cs5345_write(sd, 0x04, 0x01); + cs5345_write(sd, 0x09, 0x01); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cs5345_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cs5345_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id cs5345_id[] = { + { "cs5345", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cs5345_id); + +static struct i2c_driver cs5345_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cs5345", + }, + .probe = cs5345_probe, + .remove = cs5345_remove, + .id_table = cs5345_id, +}; + +module_i2c_driver(cs5345_driver); diff --git a/drivers/media/i2c/cs53l32a.c b/drivers/media/i2c/cs53l32a.c new file mode 100644 index 000000000000..b293912206eb --- /dev/null +++ b/drivers/media/i2c/cs53l32a.c @@ -0,0 +1,251 @@ +/* + * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver. + * Copyright (C) 2005 Martin Vaughan + * + * Audio source switching for Adaptec AVC-2410 added by Trev Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); +MODULE_AUTHOR("Martin Vaughan"); +MODULE_LICENSE("GPL"); + +static bool debug; + +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); + + +struct cs53l32a_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct cs53l32a_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cs53l32a_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cs53l32a_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +static int cs53l32a_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int cs53l32a_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int cs53l32a_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + /* There are 2 physical inputs, but the second input can be + placed in two modes, the first mode bypasses the PGA (gain), + the second goes through the PGA. Hence there are three + possible inputs to choose from. */ + if (input > 2) { + v4l2_err(sd, "Invalid input %d.\n", input); + return -EINVAL; + } + cs53l32a_write(sd, 0x01, 0x01 + (input << 4)); + return 0; +} + +static int cs53l32a_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + cs53l32a_write(sd, 0x03, ctrl->val ? 0xf0 : 0x30); + return 0; + case V4L2_CID_AUDIO_VOLUME: + cs53l32a_write(sd, 0x04, (u8)ctrl->val); + cs53l32a_write(sd, 0x05, (u8)ctrl->val); + return 0; + } + return -EINVAL; +} + +static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, + chip, V4L2_IDENT_CS53l32A, 0); +} + +static int cs53l32a_log_status(struct v4l2_subdev *sd) +{ + struct cs53l32a_state *state = to_state(sd); + u8 v = cs53l32a_read(sd, 0x01); + + v4l2_info(sd, "Input: %d\n", (v >> 4) & 3); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops cs53l32a_ctrl_ops = { + .s_ctrl = cs53l32a_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cs53l32a_core_ops = { + .log_status = cs53l32a_log_status, + .g_chip_ident = cs53l32a_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_audio_ops cs53l32a_audio_ops = { + .s_routing = cs53l32a_s_routing, +}; + +static const struct v4l2_subdev_ops cs53l32a_ops = { + .core = &cs53l32a_core_ops, + .audio = &cs53l32a_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int cs53l32a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cs53l32a_state *state; + struct v4l2_subdev *sd; + int i; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + if (!id) + strlcpy(client->name, "cs53l32a", sizeof(client->name)); + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct cs53l32a_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &cs53l32a_ops); + + for (i = 1; i <= 7; i++) { + u8 v = cs53l32a_read(sd, i); + + v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v); + } + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, -96, 12, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + + /* Set cs53l32a internal register for Adaptec 2010/2410 setup */ + + cs53l32a_write(sd, 0x01, 0x21); + cs53l32a_write(sd, 0x02, 0x29); + cs53l32a_write(sd, 0x03, 0x30); + cs53l32a_write(sd, 0x04, 0x00); + cs53l32a_write(sd, 0x05, 0x00); + cs53l32a_write(sd, 0x06, 0x00); + cs53l32a_write(sd, 0x07, 0x00); + + /* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */ + + for (i = 1; i <= 7; i++) { + u8 v = cs53l32a_read(sd, i); + + v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v); + } + return 0; +} + +static int cs53l32a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cs53l32a_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id cs53l32a_id[] = { + { "cs53l32a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cs53l32a_id); + +static struct i2c_driver cs53l32a_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cs53l32a", + }, + .probe = cs53l32a_probe, + .remove = cs53l32a_remove, + .id_table = cs53l32a_id, +}; + +module_i2c_driver(cs53l32a_driver); diff --git a/drivers/media/i2c/cx2341x.c b/drivers/media/i2c/cx2341x.c new file mode 100644 index 000000000000..103ef6bad2e2 --- /dev/null +++ b/drivers/media/i2c/cx2341x.c @@ -0,0 +1,1726 @@ +/* + * cx2341x - generic code for cx23415/6/8 based devices + * + * Copyright (C) 2006 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/tuner.h> +#include <media/cx2341x.h> +#include <media/v4l2-common.h> + +MODULE_DESCRIPTION("cx23415/6/8 driver"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/********************** COMMON CODE *********************/ + +/* definitions for audio properties bits 29-28 */ +#define CX2341X_AUDIO_ENCODING_METHOD_MPEG 0 +#define CX2341X_AUDIO_ENCODING_METHOD_AC3 1 +#define CX2341X_AUDIO_ENCODING_METHOD_LPCM 2 + +static const char *cx2341x_get_name(u32 id) +{ + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + return "Spatial Filter Mode"; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + return "Spatial Filter"; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + return "Spatial Luma Filter Type"; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + return "Spatial Chroma Filter Type"; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + return "Temporal Filter Mode"; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + return "Temporal Filter"; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return "Median Filter Type"; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + return "Median Luma Filter Maximum"; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + return "Median Luma Filter Minimum"; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + return "Median Chroma Filter Maximum"; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + return "Median Chroma Filter Minimum"; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + return "Insert Navigation Packets"; + } + return NULL; +} + +static const char **cx2341x_get_menu(u32 id) +{ + static const char *cx2341x_video_spatial_filter_mode_menu[] = { + "Manual", + "Auto", + NULL + }; + + static const char *cx2341x_video_luma_spatial_filter_type_menu[] = { + "Off", + "1D Horizontal", + "1D Vertical", + "2D H/V Separable", + "2D Symmetric non-separable", + NULL + }; + + static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = { + "Off", + "1D Horizontal", + NULL + }; + + static const char *cx2341x_video_temporal_filter_mode_menu[] = { + "Manual", + "Auto", + NULL + }; + + static const char *cx2341x_video_median_filter_type_menu[] = { + "Off", + "Horizontal", + "Vertical", + "Horizontal/Vertical", + "Diagonal", + NULL + }; + + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + return cx2341x_video_spatial_filter_mode_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + return cx2341x_video_luma_spatial_filter_type_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + return cx2341x_video_chroma_spatial_filter_type_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + return cx2341x_video_temporal_filter_mode_menu; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return cx2341x_video_median_filter_type_menu; + } + return NULL; +} + +static void cx2341x_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, + s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags) +{ + *name = cx2341x_get_name(id); + *flags = 0; + + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + *type = V4L2_CTRL_TYPE_MENU; + *min = 0; + *step = 0; + break; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + *type = V4L2_CTRL_TYPE_BOOLEAN; + *min = 0; + *max = *step = 1; + break; + default: + *type = V4L2_CTRL_TYPE_INTEGER; + break; + } + switch (id) { + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + *flags |= V4L2_CTRL_FLAG_UPDATE; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + *flags |= V4L2_CTRL_FLAG_SLIDER; + break; + case V4L2_CID_MPEG_VIDEO_ENCODING: + *flags |= V4L2_CTRL_FLAG_READ_ONLY; + break; + } +} + + +/********************** OLD CODE *********************/ + +/* Must be sorted from low to high control ID! */ +const u32 cx2341x_mpeg_ctrls[] = { + V4L2_CID_MPEG_CLASS, + V4L2_CID_MPEG_STREAM_TYPE, + V4L2_CID_MPEG_STREAM_VBI_FMT, + V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, + V4L2_CID_MPEG_AUDIO_ENCODING, + V4L2_CID_MPEG_AUDIO_L2_BITRATE, + V4L2_CID_MPEG_AUDIO_MODE, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, + V4L2_CID_MPEG_AUDIO_EMPHASIS, + V4L2_CID_MPEG_AUDIO_CRC, + V4L2_CID_MPEG_AUDIO_MUTE, + V4L2_CID_MPEG_AUDIO_AC3_BITRATE, + V4L2_CID_MPEG_VIDEO_ENCODING, + V4L2_CID_MPEG_VIDEO_ASPECT, + V4L2_CID_MPEG_VIDEO_B_FRAMES, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, + V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + V4L2_CID_MPEG_VIDEO_BITRATE, + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, + V4L2_CID_MPEG_VIDEO_MUTE, + V4L2_CID_MPEG_VIDEO_MUTE_YUV, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, + V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS, + 0 +}; +EXPORT_SYMBOL(cx2341x_mpeg_ctrls); + +static const struct cx2341x_mpeg_params default_params = { + /* misc */ + .capabilities = 0, + .port = CX2341X_PORT_MEMORY, + .width = 720, + .height = 480, + .is_50hz = 0, + + /* stream */ + .stream_type = V4L2_MPEG_STREAM_TYPE_MPEG2_PS, + .stream_vbi_fmt = V4L2_MPEG_STREAM_VBI_FMT_NONE, + .stream_insert_nav_packets = 0, + + /* audio */ + .audio_sampling_freq = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, + .audio_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + .audio_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_224K, + .audio_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_224K, + .audio_mode = V4L2_MPEG_AUDIO_MODE_STEREO, + .audio_mode_extension = V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4, + .audio_emphasis = V4L2_MPEG_AUDIO_EMPHASIS_NONE, + .audio_crc = V4L2_MPEG_AUDIO_CRC_NONE, + .audio_mute = 0, + + /* video */ + .video_encoding = V4L2_MPEG_VIDEO_ENCODING_MPEG_2, + .video_aspect = V4L2_MPEG_VIDEO_ASPECT_4x3, + .video_b_frames = 2, + .video_gop_size = 12, + .video_gop_closure = 1, + .video_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + .video_bitrate = 6000000, + .video_bitrate_peak = 8000000, + .video_temporal_decimation = 0, + .video_mute = 0, + .video_mute_yuv = 0x008080, /* YCbCr value for black */ + + /* encoding filters */ + .video_spatial_filter_mode = + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + .video_spatial_filter = 0, + .video_luma_spatial_filter_type = + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR, + .video_chroma_spatial_filter_type = + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + .video_temporal_filter_mode = + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + .video_temporal_filter = 8, + .video_median_filter_type = + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + .video_luma_median_filter_top = 255, + .video_luma_median_filter_bottom = 0, + .video_chroma_median_filter_top = 255, + .video_chroma_median_filter_bottom = 0, +}; +/* Map the control ID to the correct field in the cx2341x_mpeg_params + struct. Return -EINVAL if the ID is unknown, else return 0. */ +static int cx2341x_get_ctrl(const struct cx2341x_mpeg_params *params, + struct v4l2_ext_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + ctrl->value = params->audio_sampling_freq; + break; + case V4L2_CID_MPEG_AUDIO_ENCODING: + ctrl->value = params->audio_encoding; + break; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + ctrl->value = params->audio_l2_bitrate; + break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + ctrl->value = params->audio_ac3_bitrate; + break; + case V4L2_CID_MPEG_AUDIO_MODE: + ctrl->value = params->audio_mode; + break; + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: + ctrl->value = params->audio_mode_extension; + break; + case V4L2_CID_MPEG_AUDIO_EMPHASIS: + ctrl->value = params->audio_emphasis; + break; + case V4L2_CID_MPEG_AUDIO_CRC: + ctrl->value = params->audio_crc; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + ctrl->value = params->audio_mute; + break; + case V4L2_CID_MPEG_VIDEO_ENCODING: + ctrl->value = params->video_encoding; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + ctrl->value = params->video_aspect; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + ctrl->value = params->video_b_frames; + break; + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + ctrl->value = params->video_gop_size; + break; + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + ctrl->value = params->video_gop_closure; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + ctrl->value = params->video_bitrate_mode; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + ctrl->value = params->video_bitrate; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + ctrl->value = params->video_bitrate_peak; + break; + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + ctrl->value = params->video_temporal_decimation; + break; + case V4L2_CID_MPEG_VIDEO_MUTE: + ctrl->value = params->video_mute; + break; + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: + ctrl->value = params->video_mute_yuv; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + ctrl->value = params->stream_type; + break; + case V4L2_CID_MPEG_STREAM_VBI_FMT: + ctrl->value = params->stream_vbi_fmt; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + ctrl->value = params->video_spatial_filter_mode; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + ctrl->value = params->video_spatial_filter; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + ctrl->value = params->video_luma_spatial_filter_type; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + ctrl->value = params->video_chroma_spatial_filter_type; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + ctrl->value = params->video_temporal_filter_mode; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + ctrl->value = params->video_temporal_filter; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + ctrl->value = params->video_median_filter_type; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + ctrl->value = params->video_luma_median_filter_top; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + ctrl->value = params->video_luma_median_filter_bottom; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + ctrl->value = params->video_chroma_median_filter_top; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + ctrl->value = params->video_chroma_median_filter_bottom; + break; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + ctrl->value = params->stream_insert_nav_packets; + break; + default: + return -EINVAL; + } + return 0; +} + +/* Map the control ID to the correct field in the cx2341x_mpeg_params + struct. Return -EINVAL if the ID is unknown, else return 0. */ +static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params, int busy, + struct v4l2_ext_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + if (busy) + return -EBUSY; + params->audio_sampling_freq = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_ENCODING: + if (busy) + return -EBUSY; + if (params->capabilities & CX2341X_CAP_HAS_AC3) + if (ctrl->value != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 && + ctrl->value != V4L2_MPEG_AUDIO_ENCODING_AC3) + return -ERANGE; + params->audio_encoding = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + if (busy) + return -EBUSY; + params->audio_l2_bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + if (busy) + return -EBUSY; + if (!(params->capabilities & CX2341X_CAP_HAS_AC3)) + return -EINVAL; + params->audio_ac3_bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MODE: + params->audio_mode = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: + params->audio_mode_extension = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_EMPHASIS: + params->audio_emphasis = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_CRC: + params->audio_crc = ctrl->value; + break; + case V4L2_CID_MPEG_AUDIO_MUTE: + params->audio_mute = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_ASPECT: + params->video_aspect = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: { + int b = ctrl->value + 1; + int gop = params->video_gop_size; + params->video_b_frames = ctrl->value; + params->video_gop_size = b * ((gop + b - 1) / b); + /* Max GOP size = 34 */ + while (params->video_gop_size > 34) + params->video_gop_size -= b; + break; + } + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: { + int b = params->video_b_frames + 1; + int gop = ctrl->value; + params->video_gop_size = b * ((gop + b - 1) / b); + /* Max GOP size = 34 */ + while (params->video_gop_size > 34) + params->video_gop_size -= b; + ctrl->value = params->video_gop_size; + break; + } + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + params->video_gop_closure = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + if (busy) + return -EBUSY; + /* MPEG-1 only allows CBR */ + if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1 && + ctrl->value != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + return -EINVAL; + params->video_bitrate_mode = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + if (busy) + return -EBUSY; + params->video_bitrate = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + if (busy) + return -EBUSY; + params->video_bitrate_peak = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + params->video_temporal_decimation = ctrl->value; + break; + case V4L2_CID_MPEG_VIDEO_MUTE: + params->video_mute = (ctrl->value != 0); + break; + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: + params->video_mute_yuv = ctrl->value; + break; + case V4L2_CID_MPEG_STREAM_TYPE: + if (busy) + return -EBUSY; + params->stream_type = ctrl->value; + params->video_encoding = + (params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_SS || + params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ? + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 : + V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + /* MPEG-1 implies CBR */ + params->video_bitrate_mode = + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; + break; + case V4L2_CID_MPEG_STREAM_VBI_FMT: + params->stream_vbi_fmt = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + params->video_spatial_filter_mode = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + params->video_spatial_filter = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + params->video_luma_spatial_filter_type = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + params->video_chroma_spatial_filter_type = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + params->video_temporal_filter_mode = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + params->video_temporal_filter = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + params->video_median_filter_type = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + params->video_luma_median_filter_top = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + params->video_luma_median_filter_bottom = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + params->video_chroma_median_filter_top = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + params->video_chroma_median_filter_bottom = ctrl->value; + break; + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + params->stream_insert_nav_packets = ctrl->value; + break; + default: + return -EINVAL; + } + return 0; +} + +static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl, + s32 min, s32 max, s32 step, s32 def) +{ + const char *name; + + switch (qctrl->id) { + /* MPEG controls */ + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + cx2341x_ctrl_fill(qctrl->id, &name, &qctrl->type, + &min, &max, &step, &def, &qctrl->flags); + qctrl->minimum = min; + qctrl->maximum = max; + qctrl->step = step; + qctrl->default_value = def; + qctrl->reserved[0] = qctrl->reserved[1] = 0; + strlcpy(qctrl->name, name, sizeof(qctrl->name)); + return 0; + + default: + return v4l2_ctrl_query_fill(qctrl, min, max, step, def); + } +} + +int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, + struct v4l2_queryctrl *qctrl) +{ + int err; + + switch (qctrl->id) { + case V4L2_CID_MPEG_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); + case V4L2_CID_MPEG_STREAM_TYPE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS, + V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, 1, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS); + + case V4L2_CID_MPEG_STREAM_VBI_FMT: + if (params->capabilities & CX2341X_CAP_HAS_SLICED_VBI) + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_VBI_FMT_NONE, + V4L2_MPEG_STREAM_VBI_FMT_IVTV, 1, + V4L2_MPEG_STREAM_VBI_FMT_NONE); + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_STREAM_VBI_FMT_NONE, + V4L2_MPEG_STREAM_VBI_FMT_NONE, 1, + default_params.stream_vbi_fmt); + + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 1, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000); + + case V4L2_CID_MPEG_AUDIO_ENCODING: + if (params->capabilities & CX2341X_CAP_HAS_AC3) { + /* + * The state of L2 & AC3 bitrate controls can change + * when this control changes, but v4l2_ctrl_query_fill() + * already sets V4L2_CTRL_FLAG_UPDATE for + * V4L2_CID_MPEG_AUDIO_ENCODING, so we don't here. + */ + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_AC3, 1, + default_params.audio_encoding); + } + + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2, 1, + default_params.audio_encoding); + + case V4L2_CID_MPEG_AUDIO_L2_BITRATE: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_L2_BITRATE_192K, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1, + default_params.audio_l2_bitrate); + if (err) + return err; + if (params->capabilities & CX2341X_CAP_HAS_AC3 && + params->audio_encoding != V4L2_MPEG_AUDIO_ENCODING_LAYER_2) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_AUDIO_MODE: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_MODE_STEREO, + V4L2_MPEG_AUDIO_MODE_MONO, 1, + V4L2_MPEG_AUDIO_MODE_STEREO); + + case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 1, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4); + if (err == 0 && + params->audio_mode != V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_AUDIO_EMPHASIS: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_EMPHASIS_NONE, + V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 1, + V4L2_MPEG_AUDIO_EMPHASIS_NONE); + + case V4L2_CID_MPEG_AUDIO_CRC: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_CRC_NONE, + V4L2_MPEG_AUDIO_CRC_CRC16, 1, + V4L2_MPEG_AUDIO_CRC_NONE); + + case V4L2_CID_MPEG_AUDIO_MUTE: + return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 0); + + case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_AUDIO_AC3_BITRATE_48K, + V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 1, + default_params.audio_ac3_bitrate); + if (err) + return err; + if (params->capabilities & CX2341X_CAP_HAS_AC3) { + if (params->audio_encoding != + V4L2_MPEG_AUDIO_ENCODING_AC3) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + } else + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + return 0; + + case V4L2_CID_MPEG_VIDEO_ENCODING: + /* this setting is read-only for the cx2341x since the + V4L2_CID_MPEG_STREAM_TYPE really determines the + MPEG-1/2 setting */ + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ENCODING_MPEG_1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); + if (err == 0) + qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + return err; + + case V4L2_CID_MPEG_VIDEO_ASPECT: + return v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_ASPECT_1x1, + V4L2_MPEG_VIDEO_ASPECT_221x100, 1, + V4L2_MPEG_VIDEO_ASPECT_4x3); + + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + return v4l2_ctrl_query_fill(qctrl, 0, 33, 1, 2); + + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + return v4l2_ctrl_query_fill(qctrl, 1, 34, 1, + params->is_50hz ? 12 : 15); + + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1); + + case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: + err = v4l2_ctrl_query_fill(qctrl, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 1, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + if (err == 0 && + params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_VIDEO_BITRATE: + return v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 6000000); + + case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: + err = v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 8000000); + if (err == 0 && + params->video_bitrate_mode == + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return err; + + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + return v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 0); + + case V4L2_CID_MPEG_VIDEO_MUTE: + return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 0); + + case V4L2_CID_MPEG_VIDEO_MUTE_YUV: /* Init YUV (really YCbCr) to black */ + return v4l2_ctrl_query_fill(qctrl, 0, 0xffffff, 1, 0x008080); + + /* CX23415/6 specific */ + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 1, + default_params.video_spatial_filter_mode); + + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + cx2341x_ctrl_query_fill(qctrl, 0, 15, 1, + default_params.video_spatial_filter); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE, + 1, + default_params.video_luma_spatial_filter_type); + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + 1, + default_params.video_chroma_spatial_filter_type); + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, 1, + default_params.video_temporal_filter_mode); + + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: + cx2341x_ctrl_query_fill(qctrl, 0, 31, 1, + default_params.video_temporal_filter); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_temporal_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return cx2341x_ctrl_query_fill(qctrl, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, 1, + default_params.video_median_filter_type); + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_luma_median_filter_top); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_luma_median_filter_bottom); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_chroma_median_filter_top); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: + cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, + default_params.video_chroma_median_filter_bottom); + qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + return 0; + + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + return cx2341x_ctrl_query_fill(qctrl, 0, 1, 1, + default_params.stream_insert_nav_packets); + + default: + return -EINVAL; + + } +} +EXPORT_SYMBOL(cx2341x_ctrl_query); + +const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id) +{ + static const char * const mpeg_stream_type_without_ts[] = { + "MPEG-2 Program Stream", + "", + "MPEG-1 System Stream", + "MPEG-2 DVD-compatible Stream", + "MPEG-1 VCD-compatible Stream", + "MPEG-2 SVCD-compatible Stream", + NULL + }; + + static const char *mpeg_stream_type_with_ts[] = { + "MPEG-2 Program Stream", + "MPEG-2 Transport Stream", + "MPEG-1 System Stream", + "MPEG-2 DVD-compatible Stream", + "MPEG-1 VCD-compatible Stream", + "MPEG-2 SVCD-compatible Stream", + NULL + }; + + static const char *mpeg_audio_encoding_l2_ac3[] = { + "", + "MPEG-1/2 Layer II", + "", + "", + "AC-3", + NULL + }; + + switch (id) { + case V4L2_CID_MPEG_STREAM_TYPE: + return (p->capabilities & CX2341X_CAP_HAS_TS) ? + mpeg_stream_type_with_ts : mpeg_stream_type_without_ts; + case V4L2_CID_MPEG_AUDIO_ENCODING: + return (p->capabilities & CX2341X_CAP_HAS_AC3) ? + mpeg_audio_encoding_l2_ac3 : v4l2_ctrl_get_menu(id); + case V4L2_CID_MPEG_AUDIO_L1_BITRATE: + case V4L2_CID_MPEG_AUDIO_L3_BITRATE: + return NULL; + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: + case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: + case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: + return cx2341x_get_menu(id); + default: + return v4l2_ctrl_get_menu(id); + } +} +EXPORT_SYMBOL(cx2341x_ctrl_get_menu); + +static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params) +{ + params->audio_properties = + (params->audio_sampling_freq << 0) | + (params->audio_mode << 8) | + (params->audio_mode_extension << 10) | + (((params->audio_emphasis == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17) + ? 3 : params->audio_emphasis) << 12) | + (params->audio_crc << 14); + + if ((params->capabilities & CX2341X_CAP_HAS_AC3) && + params->audio_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) { + params->audio_properties |= + /* Not sure if this MPEG Layer II setting is required */ + ((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) | + (params->audio_ac3_bitrate << 4) | + (CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28); + } else { + /* Assuming MPEG Layer II */ + params->audio_properties |= + ((3 - params->audio_encoding) << 2) | + ((1 + params->audio_l2_bitrate) << 4); + } +} + +int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy, + struct v4l2_ext_controls *ctrls, unsigned int cmd) +{ + int err = 0; + int i; + + if (cmd == VIDIOC_G_EXT_CTRLS) { + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + + err = cx2341x_get_ctrl(params, ctrl); + if (err) { + ctrls->error_idx = i; + break; + } + } + return err; + } + for (i = 0; i < ctrls->count; i++) { + struct v4l2_ext_control *ctrl = ctrls->controls + i; + struct v4l2_queryctrl qctrl; + const char * const *menu_items = NULL; + + qctrl.id = ctrl->id; + err = cx2341x_ctrl_query(params, &qctrl); + if (err) + break; + if (qctrl.type == V4L2_CTRL_TYPE_MENU) + menu_items = cx2341x_ctrl_get_menu(params, qctrl.id); + err = v4l2_ctrl_check(ctrl, &qctrl, menu_items); + if (err) + break; + err = cx2341x_set_ctrl(params, busy, ctrl); + if (err) + break; + } + if (err == 0 && + params->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR && + params->video_bitrate_peak < params->video_bitrate) { + err = -ERANGE; + ctrls->error_idx = ctrls->count; + } + if (err) + ctrls->error_idx = i; + else + cx2341x_calc_audio_properties(params); + return err; +} +EXPORT_SYMBOL(cx2341x_ext_ctrls); + +void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p) +{ + *p = default_params; + cx2341x_calc_audio_properties(p); +} +EXPORT_SYMBOL(cx2341x_fill_defaults); + +static int cx2341x_api(void *priv, cx2341x_mbox_func func, + u32 cmd, int args, ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i; + + va_start(vargs, args); + + for (i = 0; i < args; i++) + data[i] = va_arg(vargs, int); + va_end(vargs); + return func(priv, cmd, args, 0, data); +} + +#define NEQ(field) (old->field != new->field) + +int cx2341x_update(void *priv, cx2341x_mbox_func func, + const struct cx2341x_mpeg_params *old, + const struct cx2341x_mpeg_params *new) +{ + static int mpeg_stream_type[] = { + 0, /* MPEG-2 PS */ + 1, /* MPEG-2 TS */ + 2, /* MPEG-1 SS */ + 14, /* DVD */ + 11, /* VCD */ + 12, /* SVCD */ + }; + + int err = 0; + int force = (old == NULL); + u16 temporal = new->video_temporal_filter; + + cx2341x_api(priv, func, CX2341X_ENC_SET_OUTPUT_PORT, 2, new->port, 0); + + if (force || NEQ(is_50hz)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_RATE, 1, + new->is_50hz); + if (err) return err; + } + + if (force || NEQ(width) || NEQ(height) || NEQ(video_encoding)) { + u16 w = new->width; + u16 h = new->height; + + if (new->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) { + w /= 2; + h /= 2; + } + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_SIZE, 2, + h, w); + if (err) return err; + } + if (force || NEQ(stream_type)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_STREAM_TYPE, 1, + mpeg_stream_type[new->stream_type]); + if (err) return err; + } + if (force || NEQ(video_aspect)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_ASPECT_RATIO, 1, + 1 + new->video_aspect); + if (err) return err; + } + if (force || NEQ(video_b_frames) || NEQ(video_gop_size)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_PROPERTIES, 2, + new->video_gop_size, new->video_b_frames + 1); + if (err) return err; + } + if (force || NEQ(video_gop_closure)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_CLOSURE, 1, + new->video_gop_closure); + if (err) return err; + } + if (force || NEQ(audio_properties)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_AUDIO_PROPERTIES, + 1, new->audio_properties); + if (err) return err; + } + if (force || NEQ(audio_mute)) { + err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_AUDIO, 1, + new->audio_mute); + if (err) return err; + } + if (force || NEQ(video_bitrate_mode) || NEQ(video_bitrate) || + NEQ(video_bitrate_peak)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_BIT_RATE, 5, + new->video_bitrate_mode, new->video_bitrate, + new->video_bitrate_peak / 400, 0, 0); + if (err) return err; + } + if (force || NEQ(video_spatial_filter_mode) || + NEQ(video_temporal_filter_mode) || + NEQ(video_median_filter_type)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_MODE, + 2, new->video_spatial_filter_mode | + (new->video_temporal_filter_mode << 1), + new->video_median_filter_type); + if (err) return err; + } + if (force || NEQ(video_luma_median_filter_bottom) || + NEQ(video_luma_median_filter_top) || + NEQ(video_chroma_median_filter_bottom) || + NEQ(video_chroma_median_filter_top)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_CORING_LEVELS, 4, + new->video_luma_median_filter_bottom, + new->video_luma_median_filter_top, + new->video_chroma_median_filter_bottom, + new->video_chroma_median_filter_top); + if (err) return err; + } + if (force || NEQ(video_luma_spatial_filter_type) || + NEQ(video_chroma_spatial_filter_type)) { + err = cx2341x_api(priv, func, + CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, + 2, new->video_luma_spatial_filter_type, + new->video_chroma_spatial_filter_type); + if (err) return err; + } + if (force || NEQ(video_spatial_filter) || + old->video_temporal_filter != temporal) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_PROPS, + 2, new->video_spatial_filter, temporal); + if (err) return err; + } + if (force || NEQ(video_temporal_decimation)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_DROP_RATE, + 1, new->video_temporal_decimation); + if (err) return err; + } + if (force || NEQ(video_mute) || + (new->video_mute && NEQ(video_mute_yuv))) { + err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_VIDEO, 1, + new->video_mute | (new->video_mute_yuv << 8)); + if (err) return err; + } + if (force || NEQ(stream_insert_nav_packets)) { + err = cx2341x_api(priv, func, CX2341X_ENC_MISC, 2, + 7, new->stream_insert_nav_packets); + if (err) return err; + } + return 0; +} +EXPORT_SYMBOL(cx2341x_update); + +static const char *cx2341x_menu_item(const struct cx2341x_mpeg_params *p, u32 id) +{ + const char * const *menu = cx2341x_ctrl_get_menu(p, id); + struct v4l2_ext_control ctrl; + + if (menu == NULL) + goto invalid; + ctrl.id = id; + if (cx2341x_get_ctrl(p, &ctrl)) + goto invalid; + while (ctrl.value-- && *menu) menu++; + if (*menu == NULL) + goto invalid; + return *menu; + +invalid: + return "<invalid>"; +} + +void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix) +{ + int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; + + /* Stream */ + printk(KERN_INFO "%s: Stream: %s", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_TYPE)); + if (p->stream_insert_nav_packets) + printk(" (with navigation packets)"); + printk("\n"); + printk(KERN_INFO "%s: VBI Format: %s\n", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_VBI_FMT)); + + /* Video */ + printk(KERN_INFO "%s: Video: %dx%d, %d fps%s\n", + prefix, + p->width / (is_mpeg1 ? 2 : 1), p->height / (is_mpeg1 ? 2 : 1), + p->is_50hz ? 25 : 30, + (p->video_mute) ? " (muted)" : ""); + printk(KERN_INFO "%s: Video: %s, %s, %s, %d", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ENCODING), + cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ASPECT), + cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_BITRATE_MODE), + p->video_bitrate); + if (p->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) + printk(", Peak %d", p->video_bitrate_peak); + printk("\n"); + printk(KERN_INFO + "%s: Video: GOP Size %d, %d B-Frames, %sGOP Closure\n", + prefix, + p->video_gop_size, p->video_b_frames, + p->video_gop_closure ? "" : "No "); + if (p->video_temporal_decimation) + printk(KERN_INFO "%s: Video: Temporal Decimation %d\n", + prefix, p->video_temporal_decimation); + + /* Audio */ + printk(KERN_INFO "%s: Audio: %s, %s, %s, %s%s", + prefix, + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ), + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_ENCODING), + cx2341x_menu_item(p, + p->audio_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3 + ? V4L2_CID_MPEG_AUDIO_AC3_BITRATE + : V4L2_CID_MPEG_AUDIO_L2_BITRATE), + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE), + p->audio_mute ? " (muted)" : ""); + if (p->audio_mode == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) + printk(", %s", cx2341x_menu_item(p, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION)); + printk(", %s, %s\n", + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_EMPHASIS), + cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_CRC)); + + /* Encoding filters */ + printk(KERN_INFO "%s: Spatial Filter: %s, Luma %s, Chroma %s, %d\n", + prefix, + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE), + p->video_spatial_filter); + + printk(KERN_INFO "%s: Temporal Filter: %s, %d\n", + prefix, + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE), + p->video_temporal_filter); + printk(KERN_INFO + "%s: Median Filter: %s, Luma [%d, %d], Chroma [%d, %d]\n", + prefix, + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE), + p->video_luma_median_filter_bottom, + p->video_luma_median_filter_top, + p->video_chroma_median_filter_bottom, + p->video_chroma_median_filter_top); +} +EXPORT_SYMBOL(cx2341x_log_status); + + + +/********************** NEW CODE *********************/ + +static inline struct cx2341x_handler *to_cxhdl(struct v4l2_ctrl *ctrl) +{ + return container_of(ctrl->handler, struct cx2341x_handler, hdl); +} + +static int cx2341x_hdl_api(struct cx2341x_handler *hdl, + u32 cmd, int args, ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i; + + va_start(vargs, args); + + for (i = 0; i < args; i++) + data[i] = va_arg(vargs, int); + va_end(vargs); + return hdl->func(hdl->priv, cmd, args, 0, data); +} + +/* ctrl->handler->lock is held, so it is safe to access cur.val */ +static inline int cx2341x_neq(struct v4l2_ctrl *ctrl) +{ + return ctrl && ctrl->val != ctrl->cur.val; +} + +static int cx2341x_try_ctrl(struct v4l2_ctrl *ctrl) +{ + struct cx2341x_handler *hdl = to_cxhdl(ctrl); + s32 val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_MPEG_VIDEO_B_FRAMES: { + /* video gop cluster */ + int b = val + 1; + int gop = hdl->video_gop_size->val; + + gop = b * ((gop + b - 1) / b); + + /* Max GOP size = 34 */ + while (gop > 34) + gop -= b; + hdl->video_gop_size->val = gop; + break; + } + + case V4L2_CID_MPEG_STREAM_TYPE: + /* stream type cluster */ + hdl->video_encoding->val = + (hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_SS || + hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ? + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 : + V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + if (hdl->video_encoding->val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + /* MPEG-1 implies CBR */ + hdl->video_bitrate_mode->val = + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; + /* peak bitrate shall be >= normal bitrate */ + if (hdl->video_bitrate_mode->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR && + hdl->video_bitrate_peak->val < hdl->video_bitrate->val) + hdl->video_bitrate_peak->val = hdl->video_bitrate->val; + break; + } + return 0; +} + +static int cx2341x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + static const int mpeg_stream_type[] = { + 0, /* MPEG-2 PS */ + 1, /* MPEG-2 TS */ + 2, /* MPEG-1 SS */ + 14, /* DVD */ + 11, /* VCD */ + 12, /* SVCD */ + }; + struct cx2341x_handler *hdl = to_cxhdl(ctrl); + s32 val = ctrl->val; + u32 props; + int err; + + switch (ctrl->id) { + case V4L2_CID_MPEG_STREAM_VBI_FMT: + if (hdl->ops && hdl->ops->s_stream_vbi_fmt) + return hdl->ops->s_stream_vbi_fmt(hdl, val); + return 0; + + case V4L2_CID_MPEG_VIDEO_ASPECT: + return cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_ASPECT_RATIO, 1, val + 1); + + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_CLOSURE, 1, val); + + case V4L2_CID_MPEG_AUDIO_MUTE: + return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_AUDIO, 1, val); + + case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: + return cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_FRAME_DROP_RATE, 1, val); + + case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: + return cx2341x_hdl_api(hdl, CX2341X_ENC_MISC, 2, 7, val); + + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: + /* audio properties cluster */ + props = (hdl->audio_sampling_freq->val << 0) | + (hdl->audio_mode->val << 8) | + (hdl->audio_mode_extension->val << 10) | + (hdl->audio_crc->val << 14); + if (hdl->audio_emphasis->val == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17) + props |= 3 << 12; + else + props |= hdl->audio_emphasis->val << 12; + + if (hdl->audio_encoding->val == V4L2_MPEG_AUDIO_ENCODING_AC3) { + props |= +#if 1 + /* Not sure if this MPEG Layer II setting is required */ + ((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) | +#endif + (hdl->audio_ac3_bitrate->val << 4) | + (CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28); + } else { + /* Assuming MPEG Layer II */ + props |= + ((3 - hdl->audio_encoding->val) << 2) | + ((1 + hdl->audio_l2_bitrate->val) << 4); + } + err = cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, props); + if (err) + return err; + + hdl->audio_properties = props; + if (hdl->audio_ac3_bitrate) { + int is_ac3 = hdl->audio_encoding->val == + V4L2_MPEG_AUDIO_ENCODING_AC3; + + v4l2_ctrl_activate(hdl->audio_ac3_bitrate, is_ac3); + v4l2_ctrl_activate(hdl->audio_l2_bitrate, !is_ac3); + } + v4l2_ctrl_activate(hdl->audio_mode_extension, + hdl->audio_mode->val == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO); + if (cx2341x_neq(hdl->audio_sampling_freq) && + hdl->ops && hdl->ops->s_audio_sampling_freq) + return hdl->ops->s_audio_sampling_freq(hdl, hdl->audio_sampling_freq->val); + if (cx2341x_neq(hdl->audio_mode) && + hdl->ops && hdl->ops->s_audio_mode) + return hdl->ops->s_audio_mode(hdl, hdl->audio_mode->val); + return 0; + + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + /* video gop cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_PROPERTIES, 2, + hdl->video_gop_size->val, + hdl->video_b_frames->val + 1); + + case V4L2_CID_MPEG_STREAM_TYPE: + /* stream type cluster */ + err = cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[val]); + if (err) + return err; + + err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_BIT_RATE, 5, + hdl->video_bitrate_mode->val, + hdl->video_bitrate->val, + hdl->video_bitrate_peak->val / 400, 0, 0); + if (err) + return err; + + v4l2_ctrl_activate(hdl->video_bitrate_mode, + hdl->video_encoding->val != V4L2_MPEG_VIDEO_ENCODING_MPEG_1); + v4l2_ctrl_activate(hdl->video_bitrate_peak, + hdl->video_bitrate_mode->val != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR); + if (cx2341x_neq(hdl->video_encoding) && + hdl->ops && hdl->ops->s_video_encoding) + return hdl->ops->s_video_encoding(hdl, hdl->video_encoding->val); + return 0; + + case V4L2_CID_MPEG_VIDEO_MUTE: + /* video mute cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_VIDEO, 1, + hdl->video_mute->val | + (hdl->video_mute_yuv->val << 8)); + + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: { + int active_filter; + + /* video filter mode */ + err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_MODE, 2, + hdl->video_spatial_filter_mode->val | + (hdl->video_temporal_filter_mode->val << 1), + hdl->video_median_filter_type->val); + if (err) + return err; + + active_filter = hdl->video_spatial_filter_mode->val != + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO; + v4l2_ctrl_activate(hdl->video_spatial_filter, active_filter); + v4l2_ctrl_activate(hdl->video_luma_spatial_filter_type, active_filter); + v4l2_ctrl_activate(hdl->video_chroma_spatial_filter_type, active_filter); + active_filter = hdl->video_temporal_filter_mode->val != + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO; + v4l2_ctrl_activate(hdl->video_temporal_filter, active_filter); + active_filter = hdl->video_median_filter_type->val != + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF; + v4l2_ctrl_activate(hdl->video_luma_median_filter_bottom, active_filter); + v4l2_ctrl_activate(hdl->video_luma_median_filter_top, active_filter); + v4l2_ctrl_activate(hdl->video_chroma_median_filter_bottom, active_filter); + v4l2_ctrl_activate(hdl->video_chroma_median_filter_top, active_filter); + return 0; + } + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: + /* video filter type cluster */ + return cx2341x_hdl_api(hdl, + CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2, + hdl->video_luma_spatial_filter_type->val, + hdl->video_chroma_spatial_filter_type->val); + + case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: + /* video filter cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2, + hdl->video_spatial_filter->val, + hdl->video_temporal_filter->val); + + case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: + /* video median cluster */ + return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_CORING_LEVELS, 4, + hdl->video_luma_median_filter_bottom->val, + hdl->video_luma_median_filter_top->val, + hdl->video_chroma_median_filter_bottom->val, + hdl->video_chroma_median_filter_top->val); + } + return -EINVAL; +} + +static const struct v4l2_ctrl_ops cx2341x_ops = { + .try_ctrl = cx2341x_try_ctrl, + .s_ctrl = cx2341x_s_ctrl, +}; + +static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl, + u32 id, s32 min, s32 max, s32 step, s32 def) +{ + struct v4l2_ctrl_config cfg; + + cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags); + cfg.ops = &cx2341x_ops; + cfg.id = id; + cfg.min = min; + cfg.max = max; + cfg.def = def; + if (cfg.type == V4L2_CTRL_TYPE_MENU) { + cfg.step = 0; + cfg.menu_skip_mask = step; + cfg.qmenu = cx2341x_get_menu(id); + } else { + cfg.step = step; + cfg.menu_skip_mask = 0; + } + return v4l2_ctrl_new_custom(hdl, &cfg, NULL); +} + +static struct v4l2_ctrl *cx2341x_ctrl_new_std(struct v4l2_ctrl_handler *hdl, + u32 id, s32 min, s32 max, s32 step, s32 def) +{ + return v4l2_ctrl_new_std(hdl, &cx2341x_ops, id, min, max, step, def); +} + +static struct v4l2_ctrl *cx2341x_ctrl_new_menu(struct v4l2_ctrl_handler *hdl, + u32 id, s32 max, s32 mask, s32 def) +{ + return v4l2_ctrl_new_std_menu(hdl, &cx2341x_ops, id, max, mask, def); +} + +int cx2341x_handler_init(struct cx2341x_handler *cxhdl, + unsigned nr_of_controls_hint) +{ + struct v4l2_ctrl_handler *hdl = &cxhdl->hdl; + u32 caps = cxhdl->capabilities; + int has_sliced_vbi = caps & CX2341X_CAP_HAS_SLICED_VBI; + int has_ac3 = caps & CX2341X_CAP_HAS_AC3; + int has_ts = caps & CX2341X_CAP_HAS_TS; + + cxhdl->width = 720; + cxhdl->height = 480; + + v4l2_ctrl_handler_init(hdl, nr_of_controls_hint); + + /* Add controls in ascending control ID order for fastest + insertion time. */ + cxhdl->stream_type = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_STREAM_TYPE, + V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, has_ts ? 0 : 2, + V4L2_MPEG_STREAM_TYPE_MPEG2_PS); + cxhdl->stream_vbi_fmt = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_STREAM_VBI_FMT, + V4L2_MPEG_STREAM_VBI_FMT_IVTV, has_sliced_vbi ? 0 : 2, + V4L2_MPEG_STREAM_VBI_FMT_NONE); + cxhdl->audio_sampling_freq = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 0, + V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000); + cxhdl->audio_encoding = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_ENCODING, + V4L2_MPEG_AUDIO_ENCODING_AC3, has_ac3 ? ~0x12 : ~0x2, + V4L2_MPEG_AUDIO_ENCODING_LAYER_2); + cxhdl->audio_l2_bitrate = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_L2_BITRATE, + V4L2_MPEG_AUDIO_L2_BITRATE_384K, 0x1ff, + V4L2_MPEG_AUDIO_L2_BITRATE_224K); + cxhdl->audio_mode = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_MODE, + V4L2_MPEG_AUDIO_MODE_MONO, 0, + V4L2_MPEG_AUDIO_MODE_STEREO); + cxhdl->audio_mode_extension = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 0, + V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4); + cxhdl->audio_emphasis = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_EMPHASIS, + V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 0, + V4L2_MPEG_AUDIO_EMPHASIS_NONE); + cxhdl->audio_crc = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_CRC, + V4L2_MPEG_AUDIO_CRC_CRC16, 0, + V4L2_MPEG_AUDIO_CRC_NONE); + + cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_AUDIO_MUTE, 0, 1, 1, 0); + if (has_ac3) + cxhdl->audio_ac3_bitrate = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_AUDIO_AC3_BITRATE, + V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 0x03, + V4L2_MPEG_AUDIO_AC3_BITRATE_224K); + cxhdl->video_encoding = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_VIDEO_ENCODING, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 0, + V4L2_MPEG_VIDEO_ENCODING_MPEG_2); + cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_VIDEO_ASPECT, + V4L2_MPEG_VIDEO_ASPECT_221x100, 0, + V4L2_MPEG_VIDEO_ASPECT_4x3); + cxhdl->video_b_frames = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_B_FRAMES, 0, 33, 1, 2); + cxhdl->video_gop_size = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_GOP_SIZE, + 1, 34, 1, cxhdl->is_50hz ? 12 : 15); + cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, 0, 1, 1, 1); + cxhdl->video_bitrate_mode = cx2341x_ctrl_new_menu(hdl, + V4L2_CID_MPEG_VIDEO_BITRATE_MODE, + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0, + V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); + cxhdl->video_bitrate = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_BITRATE, + 0, 27000000, 1, 6000000); + cxhdl->video_bitrate_peak = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, + 0, 27000000, 1, 8000000); + cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, 0, 255, 1, 0); + cxhdl->video_mute = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_MUTE, 0, 1, 1, 0); + cxhdl->video_mute_yuv = cx2341x_ctrl_new_std(hdl, + V4L2_CID_MPEG_VIDEO_MUTE_YUV, 0, 0xffffff, 1, 0x008080); + + /* CX23415/6 specific */ + cxhdl->video_spatial_filter_mode = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 0, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL); + cxhdl->video_spatial_filter = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER, + 0, 15, 1, 0); + cxhdl->video_luma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE, + 0, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR); + cxhdl->video_chroma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + 0, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR); + cxhdl->video_temporal_filter_mode = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, + 0, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL); + cxhdl->video_temporal_filter = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER, + 0, 31, 1, 8); + cxhdl->video_median_filter_type = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, + 0, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF); + cxhdl->video_luma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM, + 0, 255, 1, 0); + cxhdl->video_luma_median_filter_top = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP, + 0, 255, 1, 255); + cxhdl->video_chroma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM, + 0, 255, 1, 0); + cxhdl->video_chroma_median_filter_top = cx2341x_ctrl_new_custom(hdl, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP, + 0, 255, 1, 255); + cx2341x_ctrl_new_custom(hdl, V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS, + 0, 1, 1, 0); + + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + return err; + } + + v4l2_ctrl_cluster(8, &cxhdl->audio_sampling_freq); + v4l2_ctrl_cluster(2, &cxhdl->video_b_frames); + v4l2_ctrl_cluster(5, &cxhdl->stream_type); + v4l2_ctrl_cluster(2, &cxhdl->video_mute); + v4l2_ctrl_cluster(3, &cxhdl->video_spatial_filter_mode); + v4l2_ctrl_cluster(2, &cxhdl->video_luma_spatial_filter_type); + v4l2_ctrl_cluster(2, &cxhdl->video_spatial_filter); + v4l2_ctrl_cluster(4, &cxhdl->video_luma_median_filter_top); + + return 0; +} +EXPORT_SYMBOL(cx2341x_handler_init); + +void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz) +{ + cxhdl->is_50hz = is_50hz; + cxhdl->video_gop_size->default_value = cxhdl->is_50hz ? 12 : 15; +} +EXPORT_SYMBOL(cx2341x_handler_set_50hz); + +int cx2341x_handler_setup(struct cx2341x_handler *cxhdl) +{ + int h = cxhdl->height; + int w = cxhdl->width; + int err; + + err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_OUTPUT_PORT, 2, cxhdl->port, 0); + if (err) + return err; + err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_RATE, 1, cxhdl->is_50hz); + if (err) + return err; + + if (v4l2_ctrl_g_ctrl(cxhdl->video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) { + w /= 2; + h /= 2; + } + err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w); + if (err) + return err; + return v4l2_ctrl_handler_setup(&cxhdl->hdl); +} +EXPORT_SYMBOL(cx2341x_handler_setup); + +void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy) +{ + v4l2_ctrl_grab(cxhdl->audio_sampling_freq, busy); + v4l2_ctrl_grab(cxhdl->audio_encoding, busy); + v4l2_ctrl_grab(cxhdl->audio_l2_bitrate, busy); + v4l2_ctrl_grab(cxhdl->audio_ac3_bitrate, busy); + v4l2_ctrl_grab(cxhdl->stream_vbi_fmt, busy); + v4l2_ctrl_grab(cxhdl->stream_type, busy); + v4l2_ctrl_grab(cxhdl->video_bitrate_mode, busy); + v4l2_ctrl_grab(cxhdl->video_bitrate, busy); + v4l2_ctrl_grab(cxhdl->video_bitrate_peak, busy); +} +EXPORT_SYMBOL(cx2341x_handler_set_busy); diff --git a/drivers/media/i2c/cx25840/Kconfig b/drivers/media/i2c/cx25840/Kconfig new file mode 100644 index 000000000000..451133ad41ff --- /dev/null +++ b/drivers/media/i2c/cx25840/Kconfig @@ -0,0 +1,8 @@ +config VIDEO_CX25840 + tristate "Conexant CX2584x audio/video decoders" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Conexant CX2584x audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called cx25840 diff --git a/drivers/media/i2c/cx25840/Makefile b/drivers/media/i2c/cx25840/Makefile new file mode 100644 index 000000000000..898eb13340ae --- /dev/null +++ b/drivers/media/i2c/cx25840/Makefile @@ -0,0 +1,6 @@ +cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \ + cx25840-vbi.o cx25840-ir.o + +obj-$(CONFIG_VIDEO_CX25840) += cx25840.o + +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/i2c/cx25840/cx25840-audio.c b/drivers/media/i2c/cx25840/cx25840-audio.c new file mode 100644 index 000000000000..34b96c7cfd62 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-audio.c @@ -0,0 +1,571 @@ +/* cx25840 audio functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <media/v4l2-common.h> +#include <media/cx25840.h> + +#include "cx25840-core.h" + +/* + * Note: The PLL and SRC parameters are based on a reference frequency that + * would ideally be: + * + * NTSC Color subcarrier freq * 8 = 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz + * + * However, it's not the exact reference frequency that matters, only that the + * firmware and modules that comprise the driver for a particular board all + * use the same value (close to the ideal value). + * + * Comments below will note which reference frequency is assumed for various + * parameters. They will usually be one of + * + * ref_freq = 28.636360 MHz + * or + * ref_freq = 28.636363 MHz + */ + +static int cx25840_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x1006040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x1bb39ee + * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384 + * 196.6 MHz pre-postdivide + * FIXME < 200 MHz is out of specified valid range + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x01bb39ee); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x1009040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x0ec6bd6 + * 28636363 * 0x9.7635eb0/0x10 = 44100 * 384 + * 271 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x00ec6bd6); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x100a040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x098d6e5 + * 28636363 * 0xa.4c6b728/0x10 = 48000 * 384 + * 295 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x0098d6e5); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x08, AUX PLL Post Divider = 0x1e + */ + cx25840_write4(client, 0x108, 0x1e08040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x12a0869 + * 28636363 * 0x8.9504348/0x1e = 32000 * 256 + * 246 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x012a0869); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x14 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x54); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx25840_write4(client, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x18 + */ + cx25840_write4(client, 0x108, 0x1809040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x0ec6bd6 + * 28636363 * 0x9.7635eb0/0x18 = 44100 * 256 + * 271 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x00ec6bd6); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx25840_write4(client, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x18 + */ + cx25840_write4(client, 0x108, 0x180a040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x098d6e5 + * 28636363 * 0xa.4c6b728/0x18 = 48000 * 256 + * 295 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x0098d6e5); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.8000 = 48000/32000 */ + cx25840_write4(client, 0x8f8, 0x08018000); + + /* src3/4/6_ctl */ + /* 0x1.5555 = 2 * (32000/48000) */ + cx25840_write4(client, 0x900, 0x08015555); + cx25840_write4(client, 0x904, 0x08015555); + cx25840_write4(client, 0x90c, 0x08015555); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static inline int cx25836_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + return cx25840_set_audclk_freq(client, freq); +} + +static int cx23885_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + case 44100: + case 48000: + /* We don't have register values + * so avoid destroying registers. */ + /* FIXME return -EINVAL; */ + break; + } + } else { + switch (freq) { + case 32000: + case 44100: + /* We don't have register values + * so avoid destroying registers. */ + /* FIXME return -EINVAL; */ + break; + + case 48000: + /* src1_ctl */ + /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ + cx25840_write4(client, 0x8f8, 0x0801867c); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static int cx231xx_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); + break; + + case 44100: + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); + break; + + case 48000: + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + /* FIXME These cases make different assumptions about audclk */ + case 32000: + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx25840_write4(client, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); + break; + + case 44100: + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx25840_write4(client, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); + break; + + case 48000: + /* src1_ctl */ + /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ + cx25840_write4(client, 0x8f8, 0x0801867c); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static int set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (freq != 32000 && freq != 44100 && freq != 48000) + return -EINVAL; + + if (is_cx231xx(state)) + return cx231xx_set_audclk_freq(client, freq); + + if (is_cx2388x(state)) + return cx23885_set_audclk_freq(client, freq); + + if (is_cx2583x(state)) + return cx25836_set_audclk_freq(client, freq); + + return cx25840_set_audclk_freq(client, freq); +} + +void cx25840_audio_set_path(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (!is_cx2583x(state)) { + /* assert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x01); + + /* stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0); + + /* Mute everything to prevent the PFFT! */ + cx25840_write(client, 0x8d3, 0x1f); + + if (state->aud_input == CX25840_AUDIO_SERIAL) { + /* Set Path1 to Serial Audio Input */ + cx25840_write4(client, 0x8d0, 0x01011012); + + /* The microcontroller should not be started for the + * non-tuner inputs: autodetection is specific for + * TV audio. */ + } else { + /* Set Path1 to Analog Demod Main Channel */ + cx25840_write4(client, 0x8d0, 0x1f063870); + } + } + + set_audclk_freq(client, state->audclk_freq); + + if (!is_cx2583x(state)) { + if (state->aud_input != CX25840_AUDIO_SERIAL) { + /* When the microcontroller detects the + * audio format, it will unmute the lines */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } + + /* deassert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x00); + + /* Ensure the controller is running when we exit */ + if (is_cx2388x(state) || is_cx231xx(state)) + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } +} + +static void set_volume(struct i2c_client *client, int volume) +{ + int vol; + + /* Convert the volume to msp3400 values (0-127) */ + vol = volume >> 9; + + /* now scale it up to cx25840 values + * -114dB to -96dB maps to 0 + * this should be 19, but in my testing that was 4dB too loud */ + if (vol <= 23) { + vol = 0; + } else { + vol -= 23; + } + + /* PATH1_VOLUME */ + cx25840_write(client, 0x8d4, 228 - (vol * 2)); +} + +static void set_balance(struct i2c_client *client, int balance) +{ + int bal = balance >> 8; + if (bal > 0x80) { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x80); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f); + } else { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x00); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal); + } +} + +int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int retval; + + if (!is_cx2583x(state)) + cx25840_and_or(client, 0x810, ~0x1, 1); + if (state->aud_input != CX25840_AUDIO_SERIAL) { + cx25840_and_or(client, 0x803, ~0x10, 0); + cx25840_write(client, 0x8d3, 0x1f); + } + retval = set_audclk_freq(client, freq); + if (state->aud_input != CX25840_AUDIO_SERIAL) + cx25840_and_or(client, 0x803, ~0x10, 0x10); + if (!is_cx2583x(state)) + cx25840_and_or(client, 0x810, ~0x1, 0); + return retval; +} + +static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + if (state->mute->val) + set_volume(client, 0); + else + set_volume(client, state->volume->val); + break; + case V4L2_CID_AUDIO_BASS: + /* PATH1_EQ_BASS_VOL */ + cx25840_and_or(client, 0x8d9, ~0x3f, + 48 - (ctrl->val * 48 / 0xffff)); + break; + case V4L2_CID_AUDIO_TREBLE: + /* PATH1_EQ_TREBLE_VOL */ + cx25840_and_or(client, 0x8db, ~0x3f, + 48 - (ctrl->val * 48 / 0xffff)); + break; + case V4L2_CID_AUDIO_BALANCE: + set_balance(client, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = { + .s_ctrl = cx25840_audio_s_ctrl, +}; diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c new file mode 100644 index 000000000000..d8eac3e30a7e --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -0,0 +1,5340 @@ +/* cx25840 - Conexant CX25840 audio/video decoder driver + * + * Copyright (C) 2004 Ulf Eklund + * + * Based on the saa7115 driver and on the first version of Chris Kennedy's + * cx25840 driver. + * + * Changes by Tyler Trafford <tatrafford@comcast.net> + * - cleanup/rewrite for V4L2 API (2005) + * + * VBI support by Hans Verkuil <hverkuil@xs4all.nl>. + * + * NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca> + * with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>. + * + * CX23885 support by Steven Toth <stoth@linuxtv.org>. + * + * CX2388[578] IRQ handling, IO Pin mux configuration and other small fixes are + * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net> + * + * CX23888 DIF support for the HVR1850 + * Copyright (C) 2011 Steven Toth <stoth@kernellabs.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/math64.h> +#include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> +#include <media/cx25840.h> + +#include "cx25840-core.h" + +MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver"); +MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford"); +MODULE_LICENSE("GPL"); + +#define CX25840_VID_INT_STAT_REG 0x410 +#define CX25840_VID_INT_STAT_BITS 0x0000ffff +#define CX25840_VID_INT_MASK_BITS 0xffff0000 +#define CX25840_VID_INT_MASK_SHFT 16 +#define CX25840_VID_INT_MASK_REG 0x412 + +#define CX23885_AUD_MC_INT_MASK_REG 0x80c +#define CX23885_AUD_MC_INT_STAT_BITS 0xffff0000 +#define CX23885_AUD_MC_INT_CTRL_BITS 0x0000ffff +#define CX23885_AUD_MC_INT_STAT_SHFT 16 + +#define CX25840_AUD_INT_CTRL_REG 0x812 +#define CX25840_AUD_INT_STAT_REG 0x813 + +#define CX23885_PIN_CTRL_IRQ_REG 0x123 +#define CX23885_PIN_CTRL_IRQ_IR_STAT 0x40 +#define CX23885_PIN_CTRL_IRQ_AUD_STAT 0x20 +#define CX23885_PIN_CTRL_IRQ_VID_STAT 0x10 + +#define CX25840_IR_STATS_REG 0x210 +#define CX25840_IR_IRQEN_REG 0x214 + +static int cx25840_debug; + +module_param_named(debug,cx25840_debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages [0=Off (default) 1=On]"); + + +/* ----------------------------------------------------------------------- */ +static void cx23888_std_setup(struct i2c_client *client); + +int cx25840_write(struct i2c_client *client, u16 addr, u8 value) +{ + u8 buffer[3]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + buffer[2] = value; + return i2c_master_send(client, buffer, 3); +} + +int cx25840_write4(struct i2c_client *client, u16 addr, u32 value) +{ + u8 buffer[6]; + buffer[0] = addr >> 8; + buffer[1] = addr & 0xff; + buffer[2] = value & 0xff; + buffer[3] = (value >> 8) & 0xff; + buffer[4] = (value >> 16) & 0xff; + buffer[5] = value >> 24; + return i2c_master_send(client, buffer, 6); +} + +u8 cx25840_read(struct i2c_client * client, u16 addr) +{ + struct i2c_msg msgs[2]; + u8 tx_buf[2], rx_buf[1]; + + /* Write register address */ + tx_buf[0] = addr >> 8; + tx_buf[1] = addr & 0xff; + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 2; + msgs[0].buf = (char *) tx_buf; + + /* Read data from register */ + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = 1; + msgs[1].buf = (char *) rx_buf; + + if (i2c_transfer(client->adapter, msgs, 2) < 2) + return 0; + + return rx_buf[0]; +} + +u32 cx25840_read4(struct i2c_client * client, u16 addr) +{ + struct i2c_msg msgs[2]; + u8 tx_buf[2], rx_buf[4]; + + /* Write register address */ + tx_buf[0] = addr >> 8; + tx_buf[1] = addr & 0xff; + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 2; + msgs[0].buf = (char *) tx_buf; + + /* Read data from registers */ + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = 4; + msgs[1].buf = (char *) rx_buf; + + if (i2c_transfer(client->adapter, msgs, 2) < 2) + return 0; + + return (rx_buf[3] << 24) | (rx_buf[2] << 16) | (rx_buf[1] << 8) | + rx_buf[0]; +} + +int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask, + u8 or_value) +{ + return cx25840_write(client, addr, + (cx25840_read(client, addr) & and_mask) | + or_value); +} + +int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask, + u32 or_value) +{ + return cx25840_write4(client, addr, + (cx25840_read4(client, addr) & and_mask) | + or_value); +} + +/* ----------------------------------------------------------------------- */ + +static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input, + enum cx25840_audio_input aud_input); + +/* ----------------------------------------------------------------------- */ + +static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n, + struct v4l2_subdev_io_pin_config *p) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + u32 pin_ctrl; + u8 gpio_oe, gpio_data, strength; + + pin_ctrl = cx25840_read4(client, 0x120); + gpio_oe = cx25840_read(client, 0x160); + gpio_data = cx25840_read(client, 0x164); + + for (i = 0; i < n; i++) { + strength = p[i].strength; + if (strength > CX25840_PIN_DRIVE_FAST) + strength = CX25840_PIN_DRIVE_FAST; + + switch (p[i].pin) { + case CX23885_PIN_IRQ_N_GPIO16: + if (p[i].function != CX23885_PAD_IRQ_N) { + /* GPIO16 */ + pin_ctrl &= ~(0x1 << 25); + } else { + /* IRQ_N */ + if (p[i].flags & + (V4L2_SUBDEV_IO_PIN_DISABLE | + V4L2_SUBDEV_IO_PIN_INPUT)) { + pin_ctrl &= ~(0x1 << 25); + } else { + pin_ctrl |= (0x1 << 25); + } + if (p[i].flags & + V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) { + pin_ctrl &= ~(0x1 << 24); + } else { + pin_ctrl |= (0x1 << 24); + } + } + break; + case CX23885_PIN_IR_RX_GPIO19: + if (p[i].function != CX23885_PAD_GPIO19) { + /* IR_RX */ + gpio_oe |= (0x1 << 0); + pin_ctrl &= ~(0x3 << 18); + pin_ctrl |= (strength << 18); + } else { + /* GPIO19 */ + gpio_oe &= ~(0x1 << 0); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 0); + gpio_data |= ((p[i].value & 0x1) << 0); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_IR_TX_GPIO20: + if (p[i].function != CX23885_PAD_GPIO20) { + /* IR_TX */ + gpio_oe |= (0x1 << 1); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE) + pin_ctrl &= ~(0x1 << 10); + else + pin_ctrl |= (0x1 << 10); + pin_ctrl &= ~(0x3 << 18); + pin_ctrl |= (strength << 18); + } else { + /* GPIO20 */ + gpio_oe &= ~(0x1 << 1); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 1); + gpio_data |= ((p[i].value & 0x1) << 1); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_I2S_SDAT_GPIO21: + if (p[i].function != CX23885_PAD_GPIO21) { + /* I2S_SDAT */ + /* TODO: Input or Output config */ + gpio_oe |= (0x1 << 2); + pin_ctrl &= ~(0x3 << 22); + pin_ctrl |= (strength << 22); + } else { + /* GPIO21 */ + gpio_oe &= ~(0x1 << 2); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 2); + gpio_data |= ((p[i].value & 0x1) << 2); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_I2S_WCLK_GPIO22: + if (p[i].function != CX23885_PAD_GPIO22) { + /* I2S_WCLK */ + /* TODO: Input or Output config */ + gpio_oe |= (0x1 << 3); + pin_ctrl &= ~(0x3 << 22); + pin_ctrl |= (strength << 22); + } else { + /* GPIO22 */ + gpio_oe &= ~(0x1 << 3); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 3); + gpio_data |= ((p[i].value & 0x1) << 3); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + case CX23885_PIN_I2S_BCLK_GPIO23: + if (p[i].function != CX23885_PAD_GPIO23) { + /* I2S_BCLK */ + /* TODO: Input or Output config */ + gpio_oe |= (0x1 << 4); + pin_ctrl &= ~(0x3 << 22); + pin_ctrl |= (strength << 22); + } else { + /* GPIO23 */ + gpio_oe &= ~(0x1 << 4); + if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) { + gpio_data &= ~(0x1 << 4); + gpio_data |= ((p[i].value & 0x1) << 4); + } + pin_ctrl &= ~(0x3 << 12); + pin_ctrl |= (strength << 12); + } + break; + } + } + + cx25840_write(client, 0x164, gpio_data); + cx25840_write(client, 0x160, gpio_oe); + cx25840_write4(client, 0x120, pin_ctrl); + return 0; +} + +static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n, + struct v4l2_subdev_io_pin_config *pincfg) +{ + struct cx25840_state *state = to_state(sd); + + if (is_cx2388x(state)) + return cx23885_s_io_pin_config(sd, n, pincfg); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static void init_dll1(struct i2c_client *client) +{ + /* This is the Hauppauge sequence used to + * initialize the Delay Lock Loop 1 (ADC DLL). */ + cx25840_write(client, 0x159, 0x23); + cx25840_write(client, 0x15a, 0x87); + cx25840_write(client, 0x15b, 0x06); + udelay(10); + cx25840_write(client, 0x159, 0xe1); + udelay(10); + cx25840_write(client, 0x15a, 0x86); + cx25840_write(client, 0x159, 0xe0); + cx25840_write(client, 0x159, 0xe1); + cx25840_write(client, 0x15b, 0x10); +} + +static void init_dll2(struct i2c_client *client) +{ + /* This is the Hauppauge sequence used to + * initialize the Delay Lock Loop 2 (ADC DLL). */ + cx25840_write(client, 0x15d, 0xe3); + cx25840_write(client, 0x15e, 0x86); + cx25840_write(client, 0x15f, 0x06); + udelay(10); + cx25840_write(client, 0x15d, 0xe1); + cx25840_write(client, 0x15d, 0xe0); + cx25840_write(client, 0x15d, 0xe1); +} + +static void cx25836_initialize(struct i2c_client *client) +{ + /* reset configuration is described on page 3-77 of the CX25836 datasheet */ + /* 2. */ + cx25840_and_or(client, 0x000, ~0x01, 0x01); + cx25840_and_or(client, 0x000, ~0x01, 0x00); + /* 3a. */ + cx25840_and_or(client, 0x15a, ~0x70, 0x00); + /* 3b. */ + cx25840_and_or(client, 0x15b, ~0x1e, 0x06); + /* 3c. */ + cx25840_and_or(client, 0x159, ~0x02, 0x02); + /* 3d. */ + udelay(10); + /* 3e. */ + cx25840_and_or(client, 0x159, ~0x02, 0x00); + /* 3f. */ + cx25840_and_or(client, 0x159, ~0xc0, 0xc0); + /* 3g. */ + cx25840_and_or(client, 0x159, ~0x01, 0x00); + cx25840_and_or(client, 0x159, ~0x01, 0x01); + /* 3h. */ + cx25840_and_or(client, 0x15b, ~0x1e, 0x10); +} + +static void cx25840_work_handler(struct work_struct *work) +{ + struct cx25840_state *state = container_of(work, struct cx25840_state, fw_work); + cx25840_loadfw(state->c); + wake_up(&state->fw_wait); +} + +static void cx25840_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + struct workqueue_struct *q; + + /* datasheet startup in numbered steps, refer to page 3-77 */ + /* 2. */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + /* The default of this register should be 4, but I get 0 instead. + * Set this register to 4 manually. */ + cx25840_write(client, 0x000, 0x04); + /* 3. */ + init_dll1(client); + init_dll2(client); + cx25840_write(client, 0x136, 0x0a); + /* 4. */ + cx25840_write(client, 0x13c, 0x01); + cx25840_write(client, 0x13c, 0x00); + /* 5. */ + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + /* 6. */ + cx25840_write(client, 0x115, 0x8c); + cx25840_write(client, 0x116, 0x07); + cx25840_write(client, 0x118, 0x02); + /* 7. */ + cx25840_write(client, 0x4a5, 0x80); + cx25840_write(client, 0x4a5, 0x00); + cx25840_write(client, 0x402, 0x00); + /* 8. */ + cx25840_and_or(client, 0x401, ~0x18, 0); + cx25840_and_or(client, 0x4a2, ~0x10, 0x10); + /* steps 8c and 8d are done in change_input() */ + /* 10. */ + cx25840_write(client, 0x8d3, 0x1f); + cx25840_write(client, 0x8e3, 0x03); + + cx25840_std_setup(client); + + /* trial and error says these are needed to get audio */ + cx25840_write(client, 0x914, 0xa0); + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + + /* stereo preferred */ + cx25840_write(client, 0x809, 0x04); + /* AC97 shift */ + cx25840_write(client, 0x8cf, 0x0f); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); +} + +static void cx23885_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + struct workqueue_struct *q; + + /* + * Come out of digital power down + * The CX23888, at least, needs this, otherwise registers aside from + * 0x0-0x2 can't be read or written. + */ + cx25840_write(client, 0x000, 0); + + /* Internal Reset */ + cx25840_and_or(client, 0x102, ~0x01, 0x01); + cx25840_and_or(client, 0x102, ~0x01, 0x00); + + /* Stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + + /* DIF in reset? */ + cx25840_write(client, 0x398, 0); + + /* + * Trust the default xtal, no division + * '885: 28.636363... MHz + * '887: 25.000000 MHz + * '888: 50.000000 MHz + */ + cx25840_write(client, 0x2, 0x76); + + /* Power up all the PLL's and DLL */ + cx25840_write(client, 0x1, 0x40); + + /* Sys PLL */ + switch (state->id) { + case V4L2_IDENT_CX23888_AV: + /* + * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz + * 572.73 MHz before post divide + */ + /* HVR1850 or 50MHz xtal */ + cx25840_write(client, 0x2, 0x71); + cx25840_write4(client, 0x11c, 0x01d1744c); + cx25840_write4(client, 0x118, 0x00000416); + cx25840_write4(client, 0x404, 0x0010253e); + cx25840_write4(client, 0x42c, 0x42600000); + cx25840_write4(client, 0x44c, 0x161f1000); + break; + case V4L2_IDENT_CX23887_AV: + /* + * 25.0 MHz * (0x16 + 0x1d1744c/0x2000000)/4 = 5 * 28.636363 MHz + * 572.73 MHz before post divide + */ + cx25840_write4(client, 0x11c, 0x01d1744c); + cx25840_write4(client, 0x118, 0x00000416); + break; + case V4L2_IDENT_CX23885_AV: + default: + /* + * 28.636363 MHz * (0x14 + 0x0/0x2000000)/4 = 5 * 28.636363 MHz + * 572.73 MHz before post divide + */ + cx25840_write4(client, 0x11c, 0x00000000); + cx25840_write4(client, 0x118, 0x00000414); + break; + } + + /* Disable DIF bypass */ + cx25840_write4(client, 0x33c, 0x00000001); + + /* DIF Src phase inc */ + cx25840_write4(client, 0x340, 0x0df7df83); + + /* + * Vid PLL + * Setup for a BT.656 pixel clock of 13.5 Mpixels/second + * + * 28.636363 MHz * (0xf + 0x02be2c9/0x2000000)/4 = 8 * 13.5 MHz + * 432.0 MHz before post divide + */ + + /* HVR1850 */ + switch (state->id) { + case V4L2_IDENT_CX23888_AV: + /* 888/HVR1250 specific */ + cx25840_write4(client, 0x10c, 0x13333333); + cx25840_write4(client, 0x108, 0x00000515); + break; + default: + cx25840_write4(client, 0x10c, 0x002be2c9); + cx25840_write4(client, 0x108, 0x0000040f); + } + + /* Luma */ + cx25840_write4(client, 0x414, 0x00107d12); + + /* Chroma */ + cx25840_write4(client, 0x420, 0x3d008282); + + /* + * Aux PLL + * Initial setup for audio sample clock: + * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz + * Initial I2S output/master clock(?): + * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz + */ + switch (state->id) { + case V4L2_IDENT_CX23888_AV: + /* + * 50.0 MHz * (0x7 + 0x0bedfa4/0x2000000)/3 = 122.88 MHz + * 368.64 MHz before post divide + * 122.88 MHz / 0xa = 12.288 MHz + */ + /* HVR1850 or 50MHz xtal */ + cx25840_write4(client, 0x114, 0x017dbf48); + cx25840_write4(client, 0x110, 0x000a030e); + break; + case V4L2_IDENT_CX23887_AV: + /* + * 25.0 MHz * (0xe + 0x17dbf48/0x2000000)/3 = 122.88 MHz + * 368.64 MHz before post divide + * 122.88 MHz / 0xa = 12.288 MHz + */ + cx25840_write4(client, 0x114, 0x017dbf48); + cx25840_write4(client, 0x110, 0x000a030e); + break; + case V4L2_IDENT_CX23885_AV: + default: + /* + * 28.636363 MHz * (0xc + 0x1bf0c9e/0x2000000)/3 = 122.88 MHz + * 368.64 MHz before post divide + * 122.88 MHz / 0xa = 12.288 MHz + */ + cx25840_write4(client, 0x114, 0x01bf0c9e); + cx25840_write4(client, 0x110, 0x000a030c); + break; + }; + + /* ADC2 input select */ + cx25840_write(client, 0x102, 0x10); + + /* VIN1 & VIN5 */ + cx25840_write(client, 0x103, 0x11); + + /* Enable format auto detect */ + cx25840_write(client, 0x400, 0); + /* Fast subchroma lock */ + /* White crush, Chroma AGC & Chroma Killer enabled */ + cx25840_write(client, 0x401, 0xe8); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* Drive GPIO2 direction and values for HVR1700 + * where an onboard mux selects the output of demodulator + * vs the 417. Failure to set this results in no DTV. + * It's safe to set this across all Hauppauge boards + * currently, regardless of the board type. + */ + cx25840_write(client, 0x160, 0x1d); + cx25840_write(client, 0x164, 0x00); + + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + /* Call the cx23888 specific std setup func, we no longer rely on + * the generic cx24840 func. + */ + if (is_cx23888(state)) + cx23888_std_setup(client); + else + cx25840_std_setup(client); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + + /* Disable and clear video interrupts - we don't use them */ + cx25840_write4(client, CX25840_VID_INT_STAT_REG, 0xffffffff); + + /* Disable and clear audio interrupts - we don't use them */ + cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff); + cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff); + + /* CC raw enable */ + /* - VIP 1.1 control codes - 10bit, blue field enable. + * - enable raw data during vertical blanking. + * - enable ancillary Data insertion for 656 or VIP. + */ + cx25840_write4(client, 0x404, 0x0010253e); + + /* CC on - Undocumented Register */ + cx25840_write(client, 0x42f, 0x66); + + /* HVR-1250 / HVR1850 DIF related */ + /* Power everything up */ + cx25840_write4(client, 0x130, 0x0); + + /* Undocumented */ + cx25840_write4(client, 0x478, 0x6628021F); + + /* AFE_CLK_OUT_CTRL - Select the clock output source as output */ + cx25840_write4(client, 0x144, 0x5); + + /* I2C_OUT_CTL - I2S output configuration as + * Master, Sony, Left justified, left sample on WS=1 + */ + cx25840_write4(client, 0x918, 0x1a0); + + /* AFE_DIAG_CTRL1 */ + cx25840_write4(client, 0x134, 0x000a1800); + + /* AFE_DIAG_CTRL3 - Inverted Polarity for Audio and Video */ + cx25840_write4(client, 0x13c, 0x00310000); +} + +/* ----------------------------------------------------------------------- */ + +static void cx231xx_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + struct workqueue_struct *q; + + /* Internal Reset */ + cx25840_and_or(client, 0x102, ~0x01, 0x01); + cx25840_and_or(client, 0x102, ~0x01, 0x00); + + /* Stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + + /* DIF in reset? */ + cx25840_write(client, 0x398, 0); + + /* Trust the default xtal, no division */ + /* This changes for the cx23888 products */ + cx25840_write(client, 0x2, 0x76); + + /* Bring down the regulator for AUX clk */ + cx25840_write(client, 0x1, 0x40); + + /* Disable DIF bypass */ + cx25840_write4(client, 0x33c, 0x00000001); + + /* DIF Src phase inc */ + cx25840_write4(client, 0x340, 0x0df7df83); + + /* Luma */ + cx25840_write4(client, 0x414, 0x00107d12); + + /* Chroma */ + cx25840_write4(client, 0x420, 0x3d008282); + + /* ADC2 input select */ + cx25840_write(client, 0x102, 0x10); + + /* VIN1 & VIN5 */ + cx25840_write(client, 0x103, 0x11); + + /* Enable format auto detect */ + cx25840_write(client, 0x400, 0); + /* Fast subchroma lock */ + /* White crush, Chroma AGC & Chroma Killer enabled */ + cx25840_write(client, 0x401, 0xe8); + + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + cx25840_std_setup(client); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + + /* CC raw enable */ + cx25840_write(client, 0x404, 0x0b); + + /* CC on */ + cx25840_write(client, 0x42f, 0x66); + cx25840_write4(client, 0x474, 0x1e1e601a); +} + +/* ----------------------------------------------------------------------- */ + +void cx25840_std_setup(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + v4l2_std_id std = state->std; + int hblank, hactive, burst, vblank, vactive, sc; + int vblank656, src_decimation; + int luma_lpf, uv_lpf, comb; + u32 pll_int, pll_frac, pll_post; + + /* datasheet startup, step 8d */ + if (std & ~V4L2_STD_NTSC) + cx25840_write(client, 0x49f, 0x11); + else + cx25840_write(client, 0x49f, 0x14); + + if (std & V4L2_STD_625_50) { + hblank = 132; + hactive = 720; + burst = 93; + vblank = 36; + vactive = 580; + vblank656 = 40; + src_decimation = 0x21f; + luma_lpf = 2; + + if (std & V4L2_STD_SECAM) { + uv_lpf = 0; + comb = 0; + sc = 0x0a425f; + } else if (std == V4L2_STD_PAL_Nc) { + uv_lpf = 1; + comb = 0x20; + sc = 556453; + } else { + uv_lpf = 1; + comb = 0x20; + sc = 688739; + } + } else { + hactive = 720; + hblank = 122; + vactive = 487; + luma_lpf = 1; + uv_lpf = 1; + + src_decimation = 0x21f; + if (std == V4L2_STD_PAL_60) { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + luma_lpf = 2; + comb = 0x20; + sc = 688739; + } else if (std == V4L2_STD_PAL_M) { + vblank = 20; + vblank656 = 24; + burst = 0x61; + comb = 0x20; + sc = 555452; + } else { + vblank = 26; + vblank656 = 26; + burst = 0x5b; + comb = 0x66; + sc = 556063; + } + } + + /* DEBUG: Displays configured PLL frequency */ + if (!is_cx231xx(state)) { + pll_int = cx25840_read(client, 0x108); + pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff; + pll_post = cx25840_read(client, 0x109); + v4l_dbg(1, cx25840_debug, client, + "PLL regs = int: %u, frac: %u, post: %u\n", + pll_int, pll_frac, pll_post); + + if (pll_post) { + int fin, fsc; + int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L; + + pll /= pll_post; + v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n", + pll / 1000000, pll % 1000000); + v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n", + pll / 8000000, (pll / 8) % 1000000); + + fin = ((u64)src_decimation * pll) >> 12; + v4l_dbg(1, cx25840_debug, client, + "ADC Sampling freq = %d.%06d MHz\n", + fin / 1000000, fin % 1000000); + + fsc = (((u64)sc) * pll) >> 24L; + v4l_dbg(1, cx25840_debug, client, + "Chroma sub-carrier freq = %d.%06d MHz\n", + fsc / 1000000, fsc % 1000000); + + v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, " + "vblank %i, vactive %i, vblank656 %i, src_dec %i, " + "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, " + "sc 0x%06x\n", + hblank, hactive, vblank, vactive, vblank656, + src_decimation, burst, luma_lpf, uv_lpf, comb, sc); + } + } + + /* Sets horizontal blanking delay and active lines */ + cx25840_write(client, 0x470, hblank); + cx25840_write(client, 0x471, + 0xff & (((hblank >> 8) & 0x3) | (hactive << 4))); + cx25840_write(client, 0x472, hactive >> 4); + + /* Sets burst gate delay */ + cx25840_write(client, 0x473, burst); + + /* Sets vertical blanking delay and active duration */ + cx25840_write(client, 0x474, vblank); + cx25840_write(client, 0x475, + 0xff & (((vblank >> 8) & 0x3) | (vactive << 4))); + cx25840_write(client, 0x476, vactive >> 4); + cx25840_write(client, 0x477, vblank656); + + /* Sets src decimation rate */ + cx25840_write(client, 0x478, 0xff & src_decimation); + cx25840_write(client, 0x479, 0xff & (src_decimation >> 8)); + + /* Sets Luma and UV Low pass filters */ + cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); + + /* Enables comb filters */ + cx25840_write(client, 0x47b, comb); + + /* Sets SC Step*/ + cx25840_write(client, 0x47c, sc); + cx25840_write(client, 0x47d, 0xff & sc >> 8); + cx25840_write(client, 0x47e, 0xff & sc >> 16); + + /* Sets VBI parameters */ + if (std & V4L2_STD_625_50) { + cx25840_write(client, 0x47f, 0x01); + state->vbi_line_offset = 5; + } else { + cx25840_write(client, 0x47f, 0x00); + state->vbi_line_offset = 8; + } +} + +/* ----------------------------------------------------------------------- */ + +static void input_change(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + v4l2_std_id std = state->std; + + /* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */ + if (std & V4L2_STD_SECAM) { + cx25840_write(client, 0x402, 0); + } + else { + cx25840_write(client, 0x402, 0x04); + cx25840_write(client, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); + } + cx25840_and_or(client, 0x401, ~0x60, 0); + cx25840_and_or(client, 0x401, ~0x60, 0x60); + + /* Don't write into audio registers on cx2583x chips */ + if (is_cx2583x(state)) + return; + + cx25840_and_or(client, 0x810, ~0x01, 1); + + if (state->radio) { + cx25840_write(client, 0x808, 0xf9); + cx25840_write(client, 0x80b, 0x00); + } + else if (std & V4L2_STD_525_60) { + /* Certain Hauppauge PVR150 models have a hardware bug + that causes audio to drop out. For these models the + audio standard must be set explicitly. + To be precise: it affects cards with tuner models + 85, 99 and 112 (model numbers from tveeprom). */ + int hw_fix = state->pvr150_workaround; + + if (std == V4L2_STD_NTSC_M_JP) { + /* Japan uses EIAJ audio standard */ + cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7); + } else if (std == V4L2_STD_NTSC_M_KR) { + /* South Korea uses A2 audio standard */ + cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8); + } else { + /* Others use the BTSC audio standard */ + cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6); + } + cx25840_write(client, 0x80b, 0x00); + } else if (std & V4L2_STD_PAL) { + /* Autodetect audio standard and audio system */ + cx25840_write(client, 0x808, 0xff); + /* Since system PAL-L is pretty much non-existent and + not used by any public broadcast network, force + 6.5 MHz carrier to be interpreted as System DK, + this avoids DK audio detection instability */ + cx25840_write(client, 0x80b, 0x00); + } else if (std & V4L2_STD_SECAM) { + /* Autodetect audio standard and audio system */ + cx25840_write(client, 0x808, 0xff); + /* If only one of SECAM-DK / SECAM-L is required, then force + 6.5MHz carrier, else autodetect it */ + if ((std & V4L2_STD_SECAM_DK) && + !(std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) { + /* 6.5 MHz carrier to be interpreted as System DK */ + cx25840_write(client, 0x80b, 0x00); + } else if (!(std & V4L2_STD_SECAM_DK) && + (std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) { + /* 6.5 MHz carrier to be interpreted as System L */ + cx25840_write(client, 0x80b, 0x08); + } else { + /* 6.5 MHz carrier to be autodetected */ + cx25840_write(client, 0x80b, 0x10); + } + } + + cx25840_and_or(client, 0x810, ~0x01, 0); +} + +static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input, + enum cx25840_audio_input aud_input) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 is_composite = (vid_input >= CX25840_COMPOSITE1 && + vid_input <= CX25840_COMPOSITE8); + u8 is_component = (vid_input & CX25840_COMPONENT_ON) == + CX25840_COMPONENT_ON; + u8 is_dif = (vid_input & CX25840_DIF_ON) == + CX25840_DIF_ON; + u8 is_svideo = (vid_input & CX25840_SVIDEO_ON) == + CX25840_SVIDEO_ON; + int luma = vid_input & 0xf0; + int chroma = vid_input & 0xf00; + u8 reg; + u32 val; + + v4l_dbg(1, cx25840_debug, client, + "decoder set video input %d, audio input %d\n", + vid_input, aud_input); + + if (vid_input >= CX25840_VIN1_CH1) { + v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n", + vid_input); + reg = vid_input & 0xff; + is_composite = !is_component && + ((vid_input & CX25840_SVIDEO_ON) != CX25840_SVIDEO_ON); + + v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n", + reg, is_composite); + } else if (is_composite) { + reg = 0xf0 + (vid_input - CX25840_COMPOSITE1); + } else { + if ((vid_input & ~0xff0) || + luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 || + chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { + v4l_err(client, "0x%04x is not a valid video input!\n", + vid_input); + return -EINVAL; + } + reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4); + if (chroma >= CX25840_SVIDEO_CHROMA7) { + reg &= 0x3f; + reg |= (chroma - CX25840_SVIDEO_CHROMA7) >> 2; + } else { + reg &= 0xcf; + reg |= (chroma - CX25840_SVIDEO_CHROMA4) >> 4; + } + } + + /* The caller has previously prepared the correct routing + * configuration in reg (for the cx23885) so we have no + * need to attempt to flip bits for earlier av decoders. + */ + if (!is_cx2388x(state) && !is_cx231xx(state)) { + switch (aud_input) { + case CX25840_AUDIO_SERIAL: + /* do nothing, use serial audio input */ + break; + case CX25840_AUDIO4: reg &= ~0x30; break; + case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; + case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; + case CX25840_AUDIO7: reg &= ~0xc0; break; + case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; + + default: + v4l_err(client, "0x%04x is not a valid audio input!\n", + aud_input); + return -EINVAL; + } + } + + cx25840_write(client, 0x103, reg); + + /* Set INPUT_MODE to Composite, S-Video or Component */ + if (is_component) + cx25840_and_or(client, 0x401, ~0x6, 0x6); + else + cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02); + + if (is_cx2388x(state)) { + + /* Enable or disable the DIF for tuner use */ + if (is_dif) { + cx25840_and_or(client, 0x102, ~0x80, 0x80); + + /* Set of defaults for NTSC and PAL */ + cx25840_write4(client, 0x31c, 0xc2262600); + cx25840_write4(client, 0x320, 0xc2262600); + + /* 18271 IF - Nobody else yet uses a different + * tuner with the DIF, so these are reasonable + * assumptions (HVR1250 and HVR1850 specific). + */ + cx25840_write4(client, 0x318, 0xda262600); + cx25840_write4(client, 0x33c, 0x2a24c800); + cx25840_write4(client, 0x104, 0x0704dd00); + } else { + cx25840_write4(client, 0x300, 0x015c28f5); + + cx25840_and_or(client, 0x102, ~0x80, 0); + cx25840_write4(client, 0x340, 0xdf7df83); + cx25840_write4(client, 0x104, 0x0704dd80); + cx25840_write4(client, 0x314, 0x22400600); + cx25840_write4(client, 0x318, 0x40002600); + cx25840_write4(client, 0x324, 0x40002600); + cx25840_write4(client, 0x32c, 0x0250e620); + cx25840_write4(client, 0x39c, 0x01FF0B00); + + cx25840_write4(client, 0x410, 0xffff0dbf); + cx25840_write4(client, 0x414, 0x00137d03); + + /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is + CHROMA_CTRL */ + if (is_cx23888(state)) + cx25840_write4(client, 0x418, 0x01008080); + else + cx25840_write4(client, 0x418, 0x01000000); + + cx25840_write4(client, 0x41c, 0x00000000); + + /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is + CRUSH_CTRL */ + if (is_cx23888(state)) + cx25840_write4(client, 0x420, 0x001c3e0f); + else + cx25840_write4(client, 0x420, 0x001c8282); + + cx25840_write4(client, 0x42c, 0x42600000); + cx25840_write4(client, 0x430, 0x0000039b); + cx25840_write4(client, 0x438, 0x00000000); + + cx25840_write4(client, 0x440, 0xF8E3E824); + cx25840_write4(client, 0x444, 0x401040dc); + cx25840_write4(client, 0x448, 0xcd3f02a0); + cx25840_write4(client, 0x44c, 0x161f1000); + cx25840_write4(client, 0x450, 0x00000802); + + cx25840_write4(client, 0x91c, 0x01000000); + cx25840_write4(client, 0x8e0, 0x03063870); + cx25840_write4(client, 0x8d4, 0x7FFF0024); + cx25840_write4(client, 0x8d0, 0x00063073); + + cx25840_write4(client, 0x8c8, 0x00010000); + cx25840_write4(client, 0x8cc, 0x00080023); + + /* DIF BYPASS */ + cx25840_write4(client, 0x33c, 0x2a04c800); + } + + /* Reset the DIF */ + cx25840_write4(client, 0x398, 0); + } + + if (!is_cx2388x(state) && !is_cx231xx(state)) { + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ + cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); + /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */ + if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) + cx25840_and_or(client, 0x102, ~0x4, 4); + else + cx25840_and_or(client, 0x102, ~0x4, 0); + } else { + /* Set DUAL_MODE_ADC2 to 1 if component*/ + cx25840_and_or(client, 0x102, ~0x4, is_component ? 0x4 : 0x0); + if (is_composite) { + /* ADC2 input select channel 2 */ + cx25840_and_or(client, 0x102, ~0x2, 0); + } else if (!is_component) { + /* S-Video */ + if (chroma >= CX25840_SVIDEO_CHROMA7) { + /* ADC2 input select channel 3 */ + cx25840_and_or(client, 0x102, ~0x2, 2); + } else { + /* ADC2 input select channel 2 */ + cx25840_and_or(client, 0x102, ~0x2, 0); + } + } + + /* cx23885 / SVIDEO */ + if (is_cx2388x(state) && is_svideo) { +#define AFE_CTRL (0x104) +#define MODE_CTRL (0x400) + cx25840_and_or(client, 0x102, ~0x2, 0x2); + + val = cx25840_read4(client, MODE_CTRL); + val &= 0xFFFFF9FF; + + /* YC */ + val |= 0x00000200; + val &= ~0x2000; + cx25840_write4(client, MODE_CTRL, val); + + val = cx25840_read4(client, AFE_CTRL); + + /* Chroma in select */ + val |= 0x00001000; + val &= 0xfffffe7f; + /* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8). + * This sets them to use video rather than audio. + * Only one of the two will be in use. + */ + cx25840_write4(client, AFE_CTRL, val); + } else + cx25840_and_or(client, 0x102, ~0x2, 0); + } + + state->vid_input = vid_input; + state->aud_input = aud_input; + cx25840_audio_set_path(client); + input_change(client); + + if (is_cx2388x(state)) { + /* Audio channel 1 src : Parallel 1 */ + cx25840_write(client, 0x124, 0x03); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ + cx25840_write(client, 0x914, 0xa0); + + /* I2S_OUT_CTL: + * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 + * I2S_OUT_MASTER_MODE = Master + */ + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + } else if (is_cx231xx(state)) { + /* Audio channel 1 src : Parallel 1 */ + cx25840_write(client, 0x124, 0x03); + + /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ + cx25840_write(client, 0x914, 0xa0); + + /* I2S_OUT_CTL: + * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 + * I2S_OUT_MASTER_MODE = Master + */ + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + } + + if (is_cx2388x(state) && ((aud_input == CX25840_AUDIO7) || + (aud_input == CX25840_AUDIO6))) { + /* Configure audio from LR1 or LR2 input */ + cx25840_write4(client, 0x910, 0); + cx25840_write4(client, 0x8d0, 0x63073); + } else + if (is_cx2388x(state) && (aud_input == CX25840_AUDIO8)) { + /* Configure audio from tuner/sif input */ + cx25840_write4(client, 0x910, 0x12b000c9); + cx25840_write4(client, 0x8d0, 0x1f063870); + } + + if (is_cx23888(state)) { + /* HVR1850 */ + /* AUD_IO_CTRL - I2S Input, Parallel1*/ + /* - Channel 1 src - Parallel1 (Merlin out) */ + /* - Channel 2 src - Parallel2 (Merlin out) */ + /* - Channel 3 src - Parallel3 (Merlin AC97 out) */ + /* - I2S source and dir - Merlin, output */ + cx25840_write4(client, 0x124, 0x100); + + if (!is_dif) { + /* Stop microcontroller if we don't need it + * to avoid audio popping on svideo/composite use. + */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + } + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int set_v4lstd(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 fmt = 0; /* zero is autodetect */ + u8 pal_m = 0; + + /* First tests should be against specific std */ + if (state->std == V4L2_STD_NTSC_M_JP) { + fmt = 0x2; + } else if (state->std == V4L2_STD_NTSC_443) { + fmt = 0x3; + } else if (state->std == V4L2_STD_PAL_M) { + pal_m = 1; + fmt = 0x5; + } else if (state->std == V4L2_STD_PAL_N) { + fmt = 0x6; + } else if (state->std == V4L2_STD_PAL_Nc) { + fmt = 0x7; + } else if (state->std == V4L2_STD_PAL_60) { + fmt = 0x8; + } else { + /* Then, test against generic ones */ + if (state->std & V4L2_STD_NTSC) + fmt = 0x1; + else if (state->std & V4L2_STD_PAL) + fmt = 0x4; + else if (state->std & V4L2_STD_SECAM) + fmt = 0xc; + } + + v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt); + + /* Follow step 9 of section 3.16 in the cx25840 datasheet. + Without this PAL may display a vertical ghosting effect. + This happens for example with the Yuan MPC622. */ + if (fmt >= 4 && fmt < 8) { + /* Set format to NTSC-M */ + cx25840_and_or(client, 0x400, ~0xf, 1); + /* Turn off LCOMB */ + cx25840_and_or(client, 0x47b, ~6, 0); + } + cx25840_and_or(client, 0x400, ~0xf, fmt); + cx25840_and_or(client, 0x403, ~0x3, pal_m); + if (is_cx23888(state)) + cx23888_std_setup(client); + else + cx25840_std_setup(client); + if (!is_cx2583x(state)) + input_change(client); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + cx25840_write(client, 0x414, ctrl->val - 128); + break; + + case V4L2_CID_CONTRAST: + cx25840_write(client, 0x415, ctrl->val << 1); + break; + + case V4L2_CID_SATURATION: + if (is_cx23888(state)) { + cx25840_write(client, 0x418, ctrl->val << 1); + cx25840_write(client, 0x419, ctrl->val << 1); + } else { + cx25840_write(client, 0x420, ctrl->val << 1); + cx25840_write(client, 0x421, ctrl->val << 1); + } + break; + + case V4L2_CID_HUE: + if (is_cx23888(state)) + cx25840_write(client, 0x41a, ctrl->val); + else + cx25840_write(client, 0x422, ctrl->val); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int HSC, VSC, Vsrc, Hsrc, filter, Vlines; + int is_50Hz = !(state->std & V4L2_STD_525_60); + + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + + if (is_cx23888(state)) { + Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4; + } else { + Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4; + Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4; + } + + if (is_cx23888(state)) { + Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4; + } else { + Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4; + Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4; + } + + Vlines = fmt->height + (is_50Hz ? 4 : 7); + + if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) || + (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { + v4l_err(client, "%dx%d is not a valid size!\n", + fmt->width, fmt->height); + return -ERANGE; + } + + HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20); + VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); + VSC &= 0x1fff; + + if (fmt->width >= 385) + filter = 0; + else if (fmt->width > 192) + filter = 1; + else if (fmt->width > 96) + filter = 2; + else + filter = 3; + + v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale %ux%u\n", + fmt->width, fmt->height, HSC, VSC); + + /* HSCALE=HSC */ + cx25840_write(client, 0x418, HSC & 0xff); + cx25840_write(client, 0x419, (HSC >> 8) & 0xff); + cx25840_write(client, 0x41a, HSC >> 16); + /* VSCALE=VSC */ + cx25840_write(client, 0x41c, VSC & 0xff); + cx25840_write(client, 0x41d, VSC >> 8); + /* VS_INTRLACE=1 VFILT=filter */ + cx25840_write(client, 0x41e, 0x8 | filter); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static void log_video_status(struct i2c_client *client) +{ + static const char *const fmt_strs[] = { + "0x0", + "NTSC-M", "NTSC-J", "NTSC-4.43", + "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", + "0x9", "0xA", "0xB", + "SECAM", + "0xD", "0xE", "0xF" + }; + + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 vidfmt_sel = cx25840_read(client, 0x400) & 0xf; + u8 gen_stat1 = cx25840_read(client, 0x40d); + u8 gen_stat2 = cx25840_read(client, 0x40e); + int vid_input = state->vid_input; + + v4l_info(client, "Video signal: %spresent\n", + (gen_stat2 & 0x20) ? "" : "not "); + v4l_info(client, "Detected format: %s\n", + fmt_strs[gen_stat1 & 0xf]); + + v4l_info(client, "Specified standard: %s\n", + vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection"); + + if (vid_input >= CX25840_COMPOSITE1 && + vid_input <= CX25840_COMPOSITE8) { + v4l_info(client, "Specified video input: Composite %d\n", + vid_input - CX25840_COMPOSITE1 + 1); + } else { + v4l_info(client, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n", + (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8); + } + + v4l_info(client, "Specified audioclock freq: %d Hz\n", state->audclk_freq); +} + +/* ----------------------------------------------------------------------- */ + +static void log_audio_status(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u8 download_ctl = cx25840_read(client, 0x803); + u8 mod_det_stat0 = cx25840_read(client, 0x804); + u8 mod_det_stat1 = cx25840_read(client, 0x805); + u8 audio_config = cx25840_read(client, 0x808); + u8 pref_mode = cx25840_read(client, 0x809); + u8 afc0 = cx25840_read(client, 0x80b); + u8 mute_ctl = cx25840_read(client, 0x8d3); + int aud_input = state->aud_input; + char *p; + + switch (mod_det_stat0) { + case 0x00: p = "mono"; break; + case 0x01: p = "stereo"; break; + case 0x02: p = "dual"; break; + case 0x04: p = "tri"; break; + case 0x10: p = "mono with SAP"; break; + case 0x11: p = "stereo with SAP"; break; + case 0x12: p = "dual with SAP"; break; + case 0x14: p = "tri with SAP"; break; + case 0xfe: p = "forced mode"; break; + default: p = "not defined"; + } + v4l_info(client, "Detected audio mode: %s\n", p); + + switch (mod_det_stat1) { + case 0x00: p = "not defined"; break; + case 0x01: p = "EIAJ"; break; + case 0x02: p = "A2-M"; break; + case 0x03: p = "A2-BG"; break; + case 0x04: p = "A2-DK1"; break; + case 0x05: p = "A2-DK2"; break; + case 0x06: p = "A2-DK3"; break; + case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x08: p = "AM-L"; break; + case 0x09: p = "NICAM-BG"; break; + case 0x0a: p = "NICAM-DK"; break; + case 0x0b: p = "NICAM-I"; break; + case 0x0c: p = "NICAM-L"; break; + case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "high-deviation FM"; break; + case 0x11: p = "very high-deviation FM"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; + case 0xff: p = "no detected audio standard"; break; + default: p = "not defined"; + } + v4l_info(client, "Detected audio standard: %s\n", p); + v4l_info(client, "Audio microcontroller: %s\n", + (download_ctl & 0x10) ? + ((mute_ctl & 0x2) ? "detecting" : "running") : "stopped"); + + switch (audio_config >> 4) { + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; + case 0x0f: p = "automatic detection"; break; + default: p = "undefined"; + } + v4l_info(client, "Configured audio standard: %s\n", p); + + if ((audio_config >> 4) < 0xF) { + switch (audio_config & 0xF) { + case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; + case 0x01: p = "MONO2 (LANGUAGE B)"; break; + case 0x02: p = "MONO3 (STEREO forced MONO)"; break; + case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; + case 0x04: p = "STEREO"; break; + case 0x05: p = "DUAL1 (AB)"; break; + case 0x06: p = "DUAL2 (AC) (FM)"; break; + case 0x07: p = "DUAL3 (BC) (FM)"; break; + case 0x08: p = "DUAL4 (AC) (AM)"; break; + case 0x09: p = "DUAL5 (BC) (AM)"; break; + case 0x0a: p = "SAP"; break; + default: p = "undefined"; + } + v4l_info(client, "Configured audio mode: %s\n", p); + } else { + switch (audio_config & 0xF) { + case 0x00: p = "BG"; break; + case 0x01: p = "DK1"; break; + case 0x02: p = "DK2"; break; + case 0x03: p = "DK3"; break; + case 0x04: p = "I"; break; + case 0x05: p = "L"; break; + case 0x06: p = "BTSC"; break; + case 0x07: p = "EIAJ"; break; + case 0x08: p = "A2-M"; break; + case 0x09: p = "FM Radio"; break; + case 0x0f: p = "automatic standard and mode detection"; break; + default: p = "undefined"; + } + v4l_info(client, "Configured audio system: %s\n", p); + } + + if (aud_input) { + v4l_info(client, "Specified audio input: Tuner (In%d)\n", aud_input); + } else { + v4l_info(client, "Specified audio input: External\n"); + } + + switch (pref_mode & 0xf) { + case 0: p = "mono/language A"; break; + case 1: p = "language B"; break; + case 2: p = "language C"; break; + case 3: p = "analog fallback"; break; + case 4: p = "stereo"; break; + case 5: p = "language AC"; break; + case 6: p = "language BC"; break; + case 7: p = "language AB"; break; + default: p = "undefined"; + } + v4l_info(client, "Preferred audio mode: %s\n", p); + + if ((audio_config & 0xf) == 0xf) { + switch ((afc0 >> 3) & 0x3) { + case 0: p = "system DK"; break; + case 1: p = "system L"; break; + case 2: p = "autodetect"; break; + default: p = "undefined"; + } + v4l_info(client, "Selected 65 MHz format: %s\n", p); + + switch (afc0 & 0x7) { + case 0: p = "chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; + } + v4l_info(client, "Selected 45 MHz format: %s\n", p); + } +} + +/* ----------------------------------------------------------------------- */ + +/* This load_fw operation must be called to load the driver's firmware. + Without this the audio standard detection will fail and you will + only get mono. + + Since loading the firmware is often problematic when the driver is + compiled into the kernel I recommend postponing calling this function + until the first open of the video device. Another reason for + postponing it is that loading this firmware takes a long time (seconds) + due to the slow i2c bus speed. So it will speed up the boot process if + you can avoid loading the fw as long as the video device isn't used. */ +static int cx25840_load_fw(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!state->is_initialized) { + /* initialize and load firmware */ + state->is_initialized = 1; + if (is_cx2583x(state)) + cx25836_initialize(client); + else if (is_cx2388x(state)) + cx23885_initialize(client); + else if (is_cx231xx(state)) + cx231xx_initialize(client); + else + cx25840_initialize(client); + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx25840_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 1; + reg->val = cx25840_read(client, reg->reg & 0x0fff); + return 0; +} + +static int cx25840_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx25840_write(client, reg->reg & 0x0fff, reg->val & 0xff); + return 0; +} +#endif + +static int cx25840_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 v; + + if (is_cx2583x(state) || is_cx2388x(state) || is_cx231xx(state)) + return 0; + + v4l_dbg(1, cx25840_debug, client, "%s audio output\n", + enable ? "enable" : "disable"); + + if (enable) { + v = cx25840_read(client, 0x115) | 0x80; + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) | 0x03; + cx25840_write(client, 0x116, v); + } else { + v = cx25840_read(client, 0x115) & ~(0x80); + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) & ~(0x03); + cx25840_write(client, 0x116, v); + } + return 0; +} + +static int cx25840_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 v; + + v4l_dbg(1, cx25840_debug, client, "%s video output\n", + enable ? "enable" : "disable"); + if (enable) { + if (is_cx2388x(state) || is_cx231xx(state)) { + v = cx25840_read(client, 0x421) | 0x0b; + cx25840_write(client, 0x421, v); + } else { + v = cx25840_read(client, 0x115) | 0x0c; + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) | 0x04; + cx25840_write(client, 0x116, v); + } + } else { + if (is_cx2388x(state) || is_cx231xx(state)) { + v = cx25840_read(client, 0x421) & ~(0x0b); + cx25840_write(client, 0x421, v); + } else { + v = cx25840_read(client, 0x115) & ~(0x0c); + cx25840_write(client, 0x115, v); + v = cx25840_read(client, 0x116) & ~(0x04); + cx25840_write(client, 0x116, v); + } + } + return 0; +} + +/* Query the current detected video format */ +static int cx25840_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + v4l2_std_id stds[] = { + /* 0000 */ V4L2_STD_UNKNOWN, + + /* 0001 */ V4L2_STD_NTSC_M, + /* 0010 */ V4L2_STD_NTSC_M_JP, + /* 0011 */ V4L2_STD_NTSC_443, + /* 0100 */ V4L2_STD_PAL, + /* 0101 */ V4L2_STD_PAL_M, + /* 0110 */ V4L2_STD_PAL_N, + /* 0111 */ V4L2_STD_PAL_Nc, + /* 1000 */ V4L2_STD_PAL_60, + + /* 1001 */ V4L2_STD_UNKNOWN, + /* 1010 */ V4L2_STD_UNKNOWN, + /* 1001 */ V4L2_STD_UNKNOWN, + /* 1010 */ V4L2_STD_UNKNOWN, + /* 1011 */ V4L2_STD_UNKNOWN, + /* 1110 */ V4L2_STD_UNKNOWN, + /* 1111 */ V4L2_STD_UNKNOWN + }; + + u32 fmt = (cx25840_read4(client, 0x40c) >> 8) & 0xf; + *std = stds[ fmt ]; + + v4l_dbg(1, cx25840_debug, client, "g_std fmt = %x, v4l2_std_id = 0x%x\n", + fmt, (unsigned int)stds[ fmt ]); + + return 0; +} + +static int cx25840_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* A limited function that checks for signal status and returns + * the state. + */ + + /* Check for status of Horizontal lock (SRC lock isn't reliable) */ + if ((cx25840_read4(client, 0x40c) & 0x00010000) == 0) + *status |= V4L2_IN_ST_NO_SIGNAL; + + return 0; +} + +static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio == 0 && state->std == std) + return 0; + state->radio = 0; + state->std = std; + return set_v4lstd(client); +} + +static int cx25840_s_radio(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + + state->radio = 1; + return 0; +} + +static int cx25840_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (is_cx23888(state)) + cx23888_std_setup(client); + + return set_input(client, input, state->aud_input); +} + +static int cx25840_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (is_cx23888(state)) + cx23888_std_setup(client); + return set_input(client, state->vid_input, input); +} + +static int cx25840_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + input_change(client); + return 0; +} + +static int cx25840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 vpres = cx25840_read(client, 0x40e) & 0x20; + u8 mode; + int val = 0; + + if (state->radio) + return 0; + + vt->signal = vpres ? 0xffff : 0x0; + if (is_cx2583x(state)) + return 0; + + vt->capability |= + V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; + + mode = cx25840_read(client, 0x804); + + /* get rxsubchans and audmode */ + if ((mode & 0xf) == 1) + val |= V4L2_TUNER_SUB_STEREO; + else + val |= V4L2_TUNER_SUB_MONO; + + if (mode == 2 || mode == 4) + val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + + if (mode & 0x10) + val |= V4L2_TUNER_SUB_SAP; + + vt->rxsubchans = val; + vt->audmode = state->audmode; + return 0; +} + +static int cx25840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio || is_cx2583x(state)) + return 0; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + /* mono -> mono + stereo -> mono + bilingual -> lang1 */ + cx25840_and_or(client, 0x809, ~0xf, 0x00); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + /* mono -> mono + stereo -> stereo + bilingual -> lang1 */ + cx25840_and_or(client, 0x809, ~0xf, 0x04); + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang1/lang2 */ + cx25840_and_or(client, 0x809, ~0xf, 0x07); + break; + case V4L2_TUNER_MODE_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang2 */ + cx25840_and_or(client, 0x809, ~0xf, 0x01); + break; + default: + return -EINVAL; + } + state->audmode = vt->audmode; + return 0; +} + +static int cx25840_reset(struct v4l2_subdev *sd, u32 val) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (is_cx2583x(state)) + cx25836_initialize(client); + else if (is_cx2388x(state)) + cx23885_initialize(client); + else if (is_cx231xx(state)) + cx231xx_initialize(client); + else + cx25840_initialize(client); + return 0; +} + +static int cx25840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev); +} + +static int cx25840_log_status(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + log_video_status(client); + if (!is_cx2583x(state)) + log_audio_status(client); + cx25840_ir_log_status(sd); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status, + bool *handled) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *c = v4l2_get_subdevdata(sd); + u8 irq_stat, aud_stat, aud_en, ir_stat, ir_en; + u32 vid_stat, aud_mc_stat; + bool block_handled; + int ret = 0; + + irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG); + v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (entry): %s %s %s\n", + irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " "); + + if ((is_cx23885(state) || is_cx23887(state))) { + ir_stat = cx25840_read(c, CX25840_IR_STATS_REG); + ir_en = cx25840_read(c, CX25840_IR_IRQEN_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core ir IRQ status: %#04x disables: %#04x\n", + ir_stat, ir_en); + if (irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT) { + block_handled = false; + ret = cx25840_ir_irq_handler(sd, + status, &block_handled); + if (block_handled) + *handled = true; + } + } + + aud_stat = cx25840_read(c, CX25840_AUD_INT_STAT_REG); + aud_en = cx25840_read(c, CX25840_AUD_INT_CTRL_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core audio IRQ status: %#04x disables: %#04x\n", + aud_stat, aud_en); + aud_mc_stat = cx25840_read4(c, CX23885_AUD_MC_INT_MASK_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core audio MC IRQ status: %#06x enables: %#06x\n", + aud_mc_stat >> CX23885_AUD_MC_INT_STAT_SHFT, + aud_mc_stat & CX23885_AUD_MC_INT_CTRL_BITS); + if (irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT) { + if (aud_stat) { + cx25840_write(c, CX25840_AUD_INT_STAT_REG, aud_stat); + *handled = true; + } + } + + vid_stat = cx25840_read4(c, CX25840_VID_INT_STAT_REG); + v4l_dbg(2, cx25840_debug, c, + "AV Core video IRQ status: %#06x disables: %#06x\n", + vid_stat & CX25840_VID_INT_STAT_BITS, + vid_stat >> CX25840_VID_INT_MASK_SHFT); + if (irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT) { + if (vid_stat & CX25840_VID_INT_STAT_BITS) { + cx25840_write4(c, CX25840_VID_INT_STAT_REG, vid_stat); + *handled = true; + } + } + + irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG); + v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (exit): %s %s %s\n", + irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : " ", + irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : " "); + + return ret; +} + +static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status, + bool *handled) +{ + struct cx25840_state *state = to_state(sd); + + *handled = false; + + /* Only support the CX2388[578] AV Core for now */ + if (is_cx2388x(state)) + return cx23885_irq_handler(sd, status, handled); + + return -ENODEV; +} + +/* ----------------------------------------------------------------------- */ + +#define DIF_PLL_FREQ_WORD (0x300) +#define DIF_BPF_COEFF01 (0x348) +#define DIF_BPF_COEFF23 (0x34c) +#define DIF_BPF_COEFF45 (0x350) +#define DIF_BPF_COEFF67 (0x354) +#define DIF_BPF_COEFF89 (0x358) +#define DIF_BPF_COEFF1011 (0x35c) +#define DIF_BPF_COEFF1213 (0x360) +#define DIF_BPF_COEFF1415 (0x364) +#define DIF_BPF_COEFF1617 (0x368) +#define DIF_BPF_COEFF1819 (0x36c) +#define DIF_BPF_COEFF2021 (0x370) +#define DIF_BPF_COEFF2223 (0x374) +#define DIF_BPF_COEFF2425 (0x378) +#define DIF_BPF_COEFF2627 (0x37c) +#define DIF_BPF_COEFF2829 (0x380) +#define DIF_BPF_COEFF3031 (0x384) +#define DIF_BPF_COEFF3233 (0x388) +#define DIF_BPF_COEFF3435 (0x38c) +#define DIF_BPF_COEFF36 (0x390) + +void cx23885_dif_setup(struct i2c_client *client, u32 ifHz) +{ + u64 pll_freq; + u32 pll_freq_word; + + v4l_dbg(1, cx25840_debug, client, "%s(%d)\n", __func__, ifHz); + + /* Assuming TV */ + /* Calculate the PLL frequency word based on the adjusted ifHz */ + pll_freq = div_u64((u64)ifHz * 268435456, 50000000); + pll_freq_word = (u32)pll_freq; + + cx25840_write4(client, DIF_PLL_FREQ_WORD, pll_freq_word); + + /* Round down to the nearest 100KHz */ + ifHz = (ifHz / 100000) * 100000; + + if (ifHz < 3000000) + ifHz = 3000000; + + if (ifHz > 16000000) + ifHz = 16000000; + + v4l_dbg(1, cx25840_debug, client, "%s(%d) again\n", __func__, ifHz); + + switch (ifHz) { + case 3000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0024); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001bfff8); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffb4ff50); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed8fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe24fe34); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfebaffc7); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d031f); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04f0065d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07010688); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04c901d6); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe00f9d3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f342); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf235f337); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf64efb22); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0105070f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0c460fce); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00220032); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00370026); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff0ff91); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff0efe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01fdcc); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe0afedb); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440224); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0434060c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0738074e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06090361); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff99fb39); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef3b6); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21af2a5); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf573fa33); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0034067d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0bfb0fb9); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00200038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c004f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002fffdf); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff5cfeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0dfd92); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd7ffe03); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36010a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03410575); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x072607d2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x071804d5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0134fcb7); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff451); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf223f22e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4a7f94b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xff6405e8); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0bae0fa4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00000008); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001a0036); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0056006d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00670030); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffbdff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe46fd8d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd25fd4f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35ffe0); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0224049f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c9080e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x07ef0627); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c9fe45); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f513); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf250f1d2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3ecf869); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe930552); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0b5f0f8f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd0001); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000f002c); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0054007d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0093007c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0024ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea6fdbb); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd03fcca); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51feb9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00eb0392); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06270802); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08880750); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x044dffdb); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf5f8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a0f193); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf342f78f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc404b9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0b0e0f78); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff9); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0002001b); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0046007d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00ad00ba); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00870000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff26fe1a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd1bfc7e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fda4); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xffa5025c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x054507ad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08dd0847); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b80172); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef6ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf313f170); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2abf6bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6041f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0abc0f61); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff50006); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002f006c); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b200e3); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00dc007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffb9fea0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd6bfc71); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fcb1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe65010b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x042d0713); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08ec0906); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07020302); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff823); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3a7f16a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf228f5f5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfc2a0384); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0a670f4a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe9fff1); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010004d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a100f2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011a00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0053ff44); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdedfca2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fbef); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd39ffae); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x02ea0638); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08b50987); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08230483); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f960); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf45bf180); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1b8f537); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfb6102e7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x0a110f32); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffdd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff00024); + cx25840_write4(client, DIF_BPF_COEFF89, 0x007c00e5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013a014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00e6fff8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe98fd0f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fb67); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc32fe54); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x01880525); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x083909c7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x091505ee); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7fab3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf52df1b4); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf15df484); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfa9b0249); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x09ba0f19); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 3900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbfff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffcf); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1fff6); + cx25840_write4(client, DIF_BPF_COEFF89, 0x004800be); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01390184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x016300ac); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff5efdb1); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fb23); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb5cfd0d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x001703e4); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x077b09c4); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x09d2073c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251fc18); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf61cf203); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf118f3dc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf9d801aa); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x09600eff); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffefff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffca); + cx25840_write4(client, DIF_BPF_COEFF89, 0x000b0082); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01170198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01c10152); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0030fe7b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fb24); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfac3fbe9); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfea5027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0683097f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a560867); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2fd89); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf723f26f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0e8f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf919010a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x09060ee5); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe8ffca); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffa4); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffcd0036); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d70184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f601dc); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00ffff60); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb6d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa6efaf5); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd410103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x055708f9); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a9e0969); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543ff02); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf842f2f5); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0cef2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf85e006b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x08aa0ecb); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050003); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff3ffd3); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaff8b); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff95ffe5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0080014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fe023f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01ba0050); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fbf8); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa62fa3b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbf9ff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04010836); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aa90a3d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f007f); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf975f395); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0cbf231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf7a9ffcb); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x084c0eaf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000a); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0000ffe4); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ff81); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff6aff96); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x001c00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01d70271); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0254013b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fcbd); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa9ff9c5); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfadbfdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x028c073b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a750adf); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e101fa); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfab8f44e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0ddf1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf6f9ff2b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x07ed0e94); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0009000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000efff8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ff87); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff52ff54); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffb5007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01860270); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c00210); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fdb2); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb22f997); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9f2fc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0102060f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a050b4c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902036e); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfc0af51e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf106f15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf64efe8b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x078d0e77); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0019000e); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff9e); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4fff25); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff560000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0112023b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f702c0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfec8); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbe5f9b3); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf947fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xff7004b9); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x095a0b81); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a0004d8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfd65f603); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf144f104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf5aafdec); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x072b0e5a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00200022); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ffc1); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff61ff10); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff09ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x008601d7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f50340); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fff0); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcddfa19); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8e2fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfde30343); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08790b7f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50631); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfec7f6fc); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf198f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf50dfd4e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x06c90e3d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00220030); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ffed); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff87ff15); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed6ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffed014c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b90386); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110119); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfdfefac4); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8c6f92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc6701b7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07670b44); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0776); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x002df807); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf200f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf477fcb1); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x06650e1e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0009); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f001b); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffbcff36); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec2feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff5600a5); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0248038d); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00232); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff39fbab); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8f4f87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb060020); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x062a0ad2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf908a3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0192f922); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf27df05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf3e8fc14); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x06000e00); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 4900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc0002); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00160037); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00510046); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff9ff6d); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed0fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfecefff0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01aa0356); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413032b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x007ffcc5); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf96cf812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9cefe87); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x04c90a2c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c4309b4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x02f3fa4a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf30ef046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf361fb7a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x059b0de0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffa); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000a002d); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00570067); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0037ffb5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfefffe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe62ff3d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00ec02e3); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x043503f6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x01befe05); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa27f7ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8c6fcf8); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x034c0954); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5c0aa4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x044cfb7e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3b1f03f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf2e2fae1); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x05340dc0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffd001e); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0051007b); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006e0006); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff48fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe1bfe9a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x001d023e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130488); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02e6ff5b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb1ef812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7f7fb7f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x01bc084e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c430b72); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x059afcba); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf467f046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf26cfa4a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x04cd0da0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff00009); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00980056); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffa5feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe00fe15); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff4b0170); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b004d7); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03e800b9); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc48f87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf768fa23); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0022071f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf90c1b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x06dafdfd); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf52df05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf1fef9b5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x04640d7f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe6fff3); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00250072); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00af009c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x000cff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe13fdb8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe870089); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x031104e1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04b8020f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd98f92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf71df8f0); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe8805ce); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0c9c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0808ff44); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf603f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf19af922); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x03fb0d5e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffe0); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00050056); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b000d1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0071ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe53fd8c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfddfff99); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104a3); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x054a034d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff01fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf717f7ed); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfcf50461); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50cf4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0921008d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf6e7f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf13ff891); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x03920d3b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffffff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffd1); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5002f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009c00ed); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00cb0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfebafd94); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd61feb0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d0422); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05970464); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0074fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf759f721); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfb7502de); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000d21); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a2201d4); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf7d9f104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0edf804); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x03280d19); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003fffa); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe3ffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc90002); + cx25840_write4(client, DIF_BPF_COEFF89, 0x007500ef); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x010e007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff3dfdcf); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd16fddd); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440365); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x059b0548); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x01e3fc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7dff691); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa0f014d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x09020d23); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b0a0318); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf8d7f15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0a5f779); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x02bd0cf6); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060001); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffecffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ffd4); + cx25840_write4(client, DIF_BPF_COEFF89, 0x004000d5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013600f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffd3fe39); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd04fd31); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff360277); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x055605ef); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x033efdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8a5f642); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf8cbffb6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e10cfb); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0bd50456); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf9dff1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf067f6f2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x02520cd2); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080009); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff8ffd2); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaffac); + cx25840_write4(client, DIF_BPF_COEFF89, 0x000200a3); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013c014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x006dfec9); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd2bfcb7); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe350165); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04cb0651); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0477ff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9a5f635); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7b1fe20); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0ca8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c81058b); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfaf0f231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf033f66d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x01e60cae); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 5900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0009000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0005ffe1); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacff90); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffc5005f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01210184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00fcff72); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd8afc77); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51003f); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04020669); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05830103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfad7f66b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6c8fc93); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430c2b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d0d06b5); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfc08f2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf00af5ec); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x017b0c89); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0012fff5); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff8e000f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e80198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01750028); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe18fc75); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99ff15); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03050636); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0656027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc32f6e2); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf614fb17); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20b87); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d7707d2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfd26f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefeaf56f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x010f0c64); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001c000b); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1ff84); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff66ffbe); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00960184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01cd00da); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfeccfcb2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fdf9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x01e005bc); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06e703e4); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfdabf798); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf599f9b3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x02510abd); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dbf08df); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfe48f3dc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefd5f4f6); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x00a20c3e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021001f); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0ff97); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff50ff74); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0034014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fa0179); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff97fd2a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fcfa); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00a304fe); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07310525); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xff37f886); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55cf86e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c709d0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de209db); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xff6df484); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefcbf481); + cx25840_write4(client, DIF_BPF_COEFF3435, 0x00360c18); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffe000a); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021002f); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010ffb8); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff50ff3b); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffcc00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fa01fa); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0069fdd4); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fc26); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff5d0407); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07310638); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x00c9f9a8); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55cf74e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff3908c3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de20ac3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0093f537); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefcbf410); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xffca0bf2); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffb0003); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001c0037); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002fffe2); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff66ff17); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff6a007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01cd0251); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0134fea5); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fb8b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe2002e0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06e70713); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0255faf5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf599f658); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaf0799); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dbf0b96); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x01b8f5f5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefd5f3a3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xff5e0bca); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00120037); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00460010); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff8eff0f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff180000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01750276); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01e8ff8d); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fb31); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcfb0198); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x065607ad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x03cefc64); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf614f592); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2e0656); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d770c52); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x02daf6bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xefeaf33b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfef10ba3); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7fff5); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0005002f); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0054003c); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffc5ff22); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedfff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00fc0267); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0276007e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb1c); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbfe003e); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05830802); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0529fdec); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6c8f4fe); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabd04ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d0d0cf6); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x03f8f78f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf00af2d7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfe850b7b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff80020); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00560060); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0002ff4e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec4ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x006d0225); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02d50166); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb4e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb35fee1); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0477080e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x065bff82); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7b1f4a0); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf9610397); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c810d80); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0510f869); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf033f278); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfe1a0b52); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffaffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffec000c); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0078); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0040ff8e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecafeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffd301b6); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fc0235); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fbc5); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaaafd90); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x033e07d2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x075b011b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf8cbf47a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81f0224); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0bd50def); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0621f94b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf067f21e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfdae0b29); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 6900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffdffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe3fff6); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0037007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0075ffdc); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef2fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff3d0122); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02ea02dd); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fc79); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa65fc5d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x01e3074e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x082102ad); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa0ff48c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fe00a9); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b0a0e43); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0729fa33); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0a5f1c9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfd430b00); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0001fff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffe2); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001b0076); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009c002d); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff35fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfeba0076); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x029f0352); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfd60); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa69fb53); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x00740688); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08a7042d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfb75f4d6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600ff2d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a220e7a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0827fb22); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0edf17a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfcd80ad6); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004fff9); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffd2); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffb005e); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b0007a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff8ffe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe53ffc1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0221038c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fe6e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfab6fa80); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff010587); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08e90590); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfcf5f556); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bfdb3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x09210e95); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0919fc15); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf13ff12f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfc6e0aab); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070000); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe6ffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdb0039); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00af00b8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfff4feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe13ff10); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01790388); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311ff92); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb48f9ed); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd980453); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08e306cd); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe88f60a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482fc40); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x08080e93); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x09fdfd0c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf19af0ea); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfc050a81); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080008); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff0ffc9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1000d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009800e2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x005bff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe00fe74); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00b50345); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b000bc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc18f9a1); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc4802f9); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x089807dc); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0022f6f0); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407fada); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x06da0e74); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ad3fe06); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf1fef0ab); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfb9c0a55); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffdffd0); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffafffdf); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006e00f2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00b8ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe1bfdf8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffe302c8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x041301dc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd1af99e); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb1e0183); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x080908b5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x01bcf801); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdf985); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x059a0e38); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b99ff03); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf26cf071); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfb330a2a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00070011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000affdf); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffa9ffb5); + cx25840_write4(client, DIF_BPF_COEFF89, 0x003700e6); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01010000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe62fda8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff140219); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x043502e1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe42f9e6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa270000); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x073a0953); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x034cf939); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3a4f845); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x044c0de1); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c4f0000); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf2e2f03c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfacc09fe); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00040012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0016fff3); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffafff95); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff900c0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0130007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfecefd89); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe560146); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x041303bc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff81fa76); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf96cfe7d); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x063209b1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x04c9fa93); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdf71e); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x02f30d6e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cf200fd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf361f00e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfa6509d1); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00010010); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0008); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1ff84); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffbc0084); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013e00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff56fd9f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdb8005c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00460); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00c7fb45); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8f4fd07); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04fa09ce); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x062afc07); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407f614); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x01920ce0); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d8301fa); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf3e8efe5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xfa0009a4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd000b); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0022001d); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdbff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff870039); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x012a014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffedfde7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd47ff6b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x031104c6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0202fc4c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8c6fbad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x039909a7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0767fd8e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482f52b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x002d0c39); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e0002f4); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf477efc2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf99b0977); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 7900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa0004); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0020002d); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffbff91); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff61ffe8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f70184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0086fe5c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd0bfe85); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104e5); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0323fd7d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8e2fa79); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x021d093f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0879ff22); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bf465); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfec70b79); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e6803eb); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf50defa5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf937094a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fffd); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00190036); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001bffaf); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4fff99); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00aa0198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0112fef3); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd09fdb9); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d04be); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x041bfecc); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf947f978); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x00900897); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x095a00b9); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f3c5); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfd650aa3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ebc04de); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf5aaef8e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf8d5091c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7fff6); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000e0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0037ffd7); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff52ff56); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x004b0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0186ffa1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd40fd16); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440452); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04de0029); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9f2f8b2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfefe07b5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a05024d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef34d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfc0a09b8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0efa05cd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf64eef7d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf87308ed); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00000031); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0005); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff6aff27); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffe4014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01d70057); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdacfca6); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3603a7); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05610184); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfadbf82e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd74069f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a7503d6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff2ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfab808b9); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f2306b5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf6f9ef72); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf81308bf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff30022); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00560032); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff95ff10); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff8000f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fe0106); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe46fc71); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3502c7); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x059e02ce); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbf9f7f2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfbff055b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aa9054c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f2db); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf97507aa); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f350797); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf7a9ef6d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf7b40890); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffeffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe8000f); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00540058); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffcdff14); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff29007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f6019e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff01fc7c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd5101bf); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x059203f6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd41f7fe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfaa903f3); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a9e06a9); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf2e2); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf842068b); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f320871); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf85eef6e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf7560860); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002fff2); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1fff9); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00460073); + cx25840_write4(client, DIF_BPF_COEFF89, 0x000bff34); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfee90000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01c10215); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffd0fcc5); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99009d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x053d04f1); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfea5f853); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf97d0270); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a5607e4); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef314); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf723055f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f180943); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf919ef75); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf6fa0830); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0005fff8); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffe4); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002f007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0048ff6b); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec7ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0163025f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00a2fd47); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17ff73); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04a405b2); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0017f8ed); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf88500dc); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x09d208f9); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff370); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf61c0429); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ee80a0b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xf9d8ef82); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf6a00800); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007ffff); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffd4); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010007a); + cx25840_write4(client, DIF_BPF_COEFF89, 0x007cffb2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec6ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00e60277); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0168fdf9); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fe50); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x03ce0631); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0188f9c8); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7c7ff43); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x091509e3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f3f6); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf52d02ea); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ea30ac9); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfa9bef95); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf64607d0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00090007); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe9ffca); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff00065); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a10003); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfee6feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0053025b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0213fed0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fd46); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02c70668); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x02eafadb); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf74bfdae); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08230a9c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7f4a3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf45b01a6); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e480b7c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfb61efae); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf5ef079f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 8900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000d); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff5ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd10043); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b20053); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff24fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffb9020c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0295ffbb); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fc64); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x019b0654); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x042dfc1c); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf714fc2a); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07020b21); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251f575); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3a7005e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0dd80c24); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfc2aefcd); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf599076e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0002ffcf); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffba0018); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00ad009a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff79fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff260192); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02e500ab); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fbb6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x005b05f7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0545fd81); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf723fabf); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b80b70); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2f669); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf313ff15); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d550cbf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6eff2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf544073d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00030012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000fffdd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffea); + cx25840_write4(client, DIF_BPF_COEFF89, 0x009300cf); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffdcfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea600f7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fd0190); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb46); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff150554); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0627fefd); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf778f978); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x044d0b87); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543f77d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a0fdcf); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cbe0d4e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc4f01d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4f2070b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00000010); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001afff0); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaffbf); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006700ed); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0043feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe460047); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02db0258); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb1b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfddc0473); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c90082); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf811f85e); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c90b66); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069ff8ad); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf250fc8d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c140dcf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe93f04d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4a106d9); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc000c); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00200006); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ff9c); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002f00ef); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00a4ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0dff92); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x028102f7); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb37); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcbf035e); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07260202); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8e8f778); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x01340b0d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1f9f4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf223fb51); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b590e42); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xff64f083); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf45206a7); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff90005); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0022001a); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ff86); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff000d7); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f2ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01fee5); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01f60362); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb99); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbcc0222); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07380370); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9f7f6cc); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff990a7e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902fb50); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21afa1f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0a8d0ea6); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0034f0bf); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4050675); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fffe); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001e002b); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff81); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffb400a5); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01280000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe24fe50); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01460390); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfc3a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb1000ce); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x070104bf); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb37f65f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe0009bc); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a00fcbb); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf235f8f8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x09b20efc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0105f101); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf3ba0642); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff7); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00150036); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ff8c); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff810061); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013d007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe71fddf); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x007c0380); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fd13); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa94ff70); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x068005e2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc9bf633); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfc7308ca); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad5fe30); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf274f7e0); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x08c90f43); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x01d4f147); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf371060f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fff1); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00090038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ffa7); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5e0012); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013200f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfee3fd9b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffaa0331); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fe15); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa60fe18); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05bd06d1); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe1bf64a); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfafa07ae); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7effab); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2d5f6d7); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x07d30f7a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x02a3f194); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf32905dc); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffb0032); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003fffcd); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4effc1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0106014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff6efd8a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfedd02aa); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0ff34); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa74fcd7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x04bf0781); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xffaaf6a3); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf99e066b); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf90128); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf359f5e1); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x06d20fa2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0370f1e5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2e405a8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 9900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffffffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffef0024); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0051fffa); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff54ff77); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00be0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0006fdad); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe2701f3); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413005e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfad1fbba); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x039007ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x013bf73d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf868050a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c4302a1); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3fdf4fe); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x05c70fba); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x043bf23c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2a10575); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003fff1); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe50011); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00570027); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff70ff3c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00620198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x009efe01); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd95011a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04350183); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb71fad0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x023c0812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x02c3f811); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf75e0390); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5c0411); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf4c1f432); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x04b30fc1); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0503f297); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2610541); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0006fff7); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdffffc); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00510050); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff9dff18); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfffc0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0128fe80); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd32002e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130292); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc4dfa21); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x00d107ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0435f91c); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6850205); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c430573); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf5a1f37d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x03990fba); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x05c7f2f8); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf222050d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffe); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdfffe7); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f006e); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffd6ff0f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff96014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0197ff1f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd05ff3e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0037c); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd59f9b7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff5d0781); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0585fa56); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5e4006f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf906c4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf69df2e0); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x02790fa2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0688f35d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1e604d8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00090005); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe4ffd6); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025007e); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0014ff20); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff3c00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e1ffd0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd12fe5c); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110433); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe88f996); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfdf106d1); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06aafbb7); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf57efed8); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e07ff); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf7b0f25e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x01560f7a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0745f3c7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1ac04a4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000c); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffedffcb); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005007d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0050ff4c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef6007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01ff0086); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd58fd97); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104ad); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xffcaf9c0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc9905e2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x079afd35); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf555fd46); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50920); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf8d9f1f6); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x00310f43); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x07fdf435); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf174046f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050011); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffaffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5006b); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0082ff8c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecc0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f00130); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdd2fcfc); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d04e3); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x010efa32); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb6404bf); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x084efec5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf569fbc2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000a23); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfa15f1ab); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xff0b0efc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x08b0f4a7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf13f043a); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00020012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0007ffcd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9004c); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a4ffd9); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec3ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01b401c1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe76fc97); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x004404d2); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0245fae8); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa5f0370); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08c1005f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5bcfa52); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x09020b04); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfb60f17b); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfde70ea6); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x095df51e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf10c0405); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0014ffdb); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb40023); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b2002a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedbff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0150022d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff38fc6f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36047b); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x035efbda); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9940202); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08ee01f5); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf649f8fe); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e10bc2); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfcb6f169); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfcc60e42); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0a04f599); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0db03d0); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffb000d); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001dffed); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaafff5); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00aa0077); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff13feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00ce026b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x000afc85); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3503e3); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x044cfcfb); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf90c0082); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08d5037f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf710f7cc); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0c59); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfe16f173); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfbaa0dcf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0aa5f617); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0ad039b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 10900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff90006); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00210003); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffc8); + cx25840_write4(client, DIF_BPF_COEFF89, 0x008e00b6); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff63fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x003a0275); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00dafcda); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd510313); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0501fe40); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8cbfefd); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x087604f0); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf80af6c2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430cc8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xff7af19a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfa940d4e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0b3ff699); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0810365); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8ffff); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00210018); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffa3); + cx25840_write4(client, DIF_BPF_COEFF89, 0x006000e1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffc4fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffa0024b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x019afd66); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc990216); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0575ff99); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8d4fd81); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x07d40640); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf932f5e6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20d0d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x00dff1de); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf9860cbf); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0bd1f71e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf058032f); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff8); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001b0029); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1ff8a); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002600f2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x002cfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff0f01f0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x023bfe20); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc1700fa); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05a200f7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf927fc1c); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06f40765); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa82f53b); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x02510d27); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0243f23d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf8810c24); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0c5cf7a7); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf03102fa); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff2); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00110035); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0ff81); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffe700e7); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x008ffeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe94016d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b0fefb); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3ffd1); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05850249); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9c1fadb); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x05de0858); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfbf2f4c4); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c70d17); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x03a0f2b8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf7870b7c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0cdff833); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf00d02c4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffdffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00040038); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0010ff88); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffac00c2); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e2ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe3900cb); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f1ffe9); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3feaa); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05210381); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa9cf9c8); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x04990912); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfd7af484); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff390cdb); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x04f4f34d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf69a0ac9); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0d5af8c1); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefec028e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0000ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff60033); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002fff9f); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7b0087); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011eff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe080018); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f900d8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fd96); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x04790490); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbadf8ed); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x032f098e); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff10f47d); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaf0c75); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x063cf3fc); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf5ba0a0b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0dccf952); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefcd0258); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004fff1); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffea0026); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0046ffc3); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5a003c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013b0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe04ff63); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c801b8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fca6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0397056a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfcecf853); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x01ad09c9); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x00acf4ad); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2e0be7); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0773f4c2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4e90943); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e35f9e6); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefb10221); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007fff6); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe20014); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0054ffee); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4effeb); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0137007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2efebb); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0260027a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fbe6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02870605); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfe4af7fe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x001d09c1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0243f515); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabd0b32); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0897f59e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4280871); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e95fa7c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef9701eb); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffd); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffff); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0056001d); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff57ff9c); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011300f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe82fe2e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01ca0310); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb62); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0155065a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xffbaf7f2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe8c0977); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x03cef5b2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf9610a58); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x09a5f68f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3790797); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0eebfb14); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef8001b5); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080004); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffe9); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0047); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff75ff58); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d1014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfef9fdc8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0111036f); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb21); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x00120665); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x012df82e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd0708ec); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0542f682); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81f095c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a9af792); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2db06b5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f38fbad); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef6c017e); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 11900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007000b); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe7ffd8); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00370068); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffa4ff28); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00790184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff87fd91); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00430392); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb26); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfece0626); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0294f8b2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb990825); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0698f77f); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fe0842); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b73f8a7); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf25105cd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f7bfc48); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef5a0148); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00050010); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff2ffcc); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001b007b); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffdfff10); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00140198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0020fd8e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff710375); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfb73); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd9a059f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x03e0f978); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfa4e0726); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07c8f8a7); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600070c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c2ff9c9); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1db04de); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fb4fce5); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef4b0111); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00010012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffffffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffb007e); + cx25840_write4(client, DIF_BPF_COEFF89, 0x001dff14); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffad0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00b7fdbe); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfea9031b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fc01); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc8504d6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0504fa79); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf93005f6); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08caf9f2); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52b05c0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0ccbfaf9); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf17903eb); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fe3fd83); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3f00db); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffe0011); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000cffcc); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdb0071); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0058ff32); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff4f014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x013cfe1f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdfb028a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fcc9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb9d03d6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05f4fbad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf848049d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0999fb5b); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf4820461); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d46fc32); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf12d02f4); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x1007fe21); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3600a4); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0017ffd9); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc10055); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0088ff68); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff0400f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01a6fea7); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd7501cc); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0fdc0); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaef02a8); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06a7fd07); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf79d0326); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a31fcda); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf40702f3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d9ffd72); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0f601fa); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x1021fec0); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2f006d); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80007); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001fffeb); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaf002d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a8ffb0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed3007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e9ff4c); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd2000ee); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413fed8); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa82015c); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0715fe7d); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7340198); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a8dfe69); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bd017c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dd5feb8); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0d500fd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x1031ff60); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2b0037); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff70000); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00220000); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffa90000); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b30000); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec20000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x02000000); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd030000); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04350000); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa5e0000); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x073b0000); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7110000); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aac0000); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3a40000); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de70000); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0c90000); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x10360000); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef290000); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff9); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001f0015); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffafffd3); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a80050); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed3ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e900b4); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd20ff12); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130128); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa82fea4); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x07150183); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf734fe68); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a8d0197); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdfe84); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dd50148); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0d5ff03); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x103100a0); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2bffc9); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff2); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00170027); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1ffab); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00880098); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff04ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01a60159); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd75fe34); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00240); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaeffd58); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06a702f9); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf79dfcda); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a310326); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407fd0d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d9f028e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0f6fe06); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x10210140); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2fff93); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffeffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000c0034); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffdbff8f); + cx25840_write4(client, DIF_BPF_COEFF89, 0x005800ce); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff4ffeb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x013c01e1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdfbfd76); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110337); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb9dfc2a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05f40453); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf848fb63); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x099904a5); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482fb9f); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d4603ce); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf12dfd0c); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x100701df); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef36ff5c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 12900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0001ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffff0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfffbff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0x001d00ec); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffadfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00b70242); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfea9fce5); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024103ff); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc85fb2a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05040587); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf930fa0a); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x08ca060e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bfa40); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0ccb0507); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf179fc15); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fe3027d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3fff25); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0005fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff20034); + cx25840_write4(client, DIF_BPF_COEFF67, 0x001bff85); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffdf00f0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0014fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00200272); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff71fc8b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d048d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd9afa61); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x03e00688); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfa4ef8da); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x07c80759); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f8f4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c2f0637); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1dbfb22); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fb4031b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef4bfeef); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007fff5); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe70028); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0037ff98); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffa400d8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0079fe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff87026f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0043fc6e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x004404da); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfecef9da); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0294074e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb99f7db); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x06980881); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef7be); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b730759); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf251fa33); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f7b03b8); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef5afeb8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffc); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe00017); + cx25840_write4(client, DIF_BPF_COEFF67, 0x004cffb9); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7500a8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d1feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfef90238); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0111fc91); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3604df); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0012f99b); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x012d07d2); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd07f714); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0542097e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff6a4); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a9a086e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2dbf94b); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f380453); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef6cfe82); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080003); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffde0001); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0056ffe3); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff570064); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0113ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe8201d2); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01cafcf0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35049e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0155f9a6); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xffba080e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe8cf689); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x03ce0a4e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f5a8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x09a50971); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf379f869); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0eeb04ec); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef80fe4b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0007000a); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe2ffec); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00540012); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4e0015); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0137ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2e0145); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0260fd86); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51041a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0287f9fb); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfe4a0802); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x001df63f); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02430aeb); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf4ce); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x08970a62); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf428f78f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e950584); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xef97fe15); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0004000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffeaffda); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0046003d); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5affc4); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013b0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe04009d); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c8fe48); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99035a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0397fa96); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfcec07ad); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x01adf637); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x00ac0b53); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef419); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x07730b3e); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4e9f6bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e35061a); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefb1fddf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00000012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfff6ffcd); + cx25840_write4(client, DIF_BPF_COEFF67, 0x002f0061); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7bff79); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x011e007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe08ffe8); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f9ff28); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17026a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0479fb70); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbad0713); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x032ff672); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff100b83); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff38b); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x063c0c04); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf5baf5f5); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0dcc06ae); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefcdfda8); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd0012); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0004ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00100078); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffacff3e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e200f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe39ff35); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f10017); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd30156); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0521fc7f); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa9c0638); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0499f6ee); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfd7a0b7c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f325); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x04f40cb3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf69af537); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0d5a073f); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xefecfd72); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa000e); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0011ffcb); + cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffe7ff19); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x008f014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe94fe93); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b00105); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3002f); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x0585fdb7); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9c10525); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x05def7a8); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfbf20b3c); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7f2e9); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x03a00d48); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf787f484); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0cdf07cd); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf00dfd3c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 13900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80008); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001bffd7); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffd10076); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0026ff0e); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x002c0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff0ffe10); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x023b01e0); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17ff06); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05a2ff09); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf92703e4); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06f4f89b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa820ac5); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251f2d9); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x02430dc3); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf881f3dc); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0c5c0859); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf031fd06); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80001); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021ffe8); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffba005d); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0060ff1f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffc40198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xffa0fdb5); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x019a029a); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fdea); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x05750067); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8d4027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x07d4f9c0); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf9320a1a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2f2f3); + cx25840_write4(client, DIF_BPF_COEFF2829, 0x00df0e22); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xf986f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0bd108e2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf058fcd1); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffa); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0021fffd); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffac0038); + cx25840_write4(client, DIF_BPF_COEFF89, 0x008eff4a); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff630184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x003afd8b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x00da0326); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fced); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x050101c0); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8cb0103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x0876fb10); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf80a093e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543f338); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xff7a0e66); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfa94f2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0b3f0967); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf081fc9b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbfff3); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001d0013); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaa000b); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00aaff89); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff13014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00cefd95); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x000a037b); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fc1d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x044c0305); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf90cff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08d5fc81); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7100834); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069ff3a7); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfe160e8d); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfbaaf231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0aa509e9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0adfc65); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffffffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00140025); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ffdd); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00b2ffd6); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedb00f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x0150fdd3); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xff380391); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb85); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x035e0426); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xf994fdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08eefe0b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6490702); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1f43e); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfcb60e97); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfcc6f1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x0a040a67); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0dbfc30); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0002ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00070033); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ffb4); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00a40027); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec3007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01b4fe3f); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe760369); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb2e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x02450518); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa5ffc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x08c1ffa1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5bc05ae); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902f4fc); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfb600e85); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xfde7f15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x095d0ae2); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf10cfbfb); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0005ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffa0038); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff95); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00820074); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecc0000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f0fed0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdd20304); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfb1d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x010e05ce); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb64fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x084e013b); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf569043e); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a00f5dd); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xfa150e55); + cx25840_write4(client, DIF_BPF_COEFF3031, 0xff0bf104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x08b00b59); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf13ffbc6); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffed0035); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ff83); + cx25840_write4(client, DIF_BPF_COEFF89, 0x005000b4); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef6ff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01ffff7a); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd580269); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fb53); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xffca0640); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc99fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x079a02cb); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55502ba); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad5f6e0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf8d90e0a); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0031f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x07fd0bcb); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf174fb91); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0009fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe4002a); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ff82); + cx25840_write4(client, DIF_BPF_COEFF89, 0x001400e0); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff3cff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e10030); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd1201a4); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fbcd); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe88066a); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xfdf1f92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x06aa0449); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf57e0128); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7ef801); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf7b00da2); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0156f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x07450c39); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1acfb5c); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00080002); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdf0019); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003fff92); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffd600f1); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff96feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x019700e1); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd0500c2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0fc84); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd590649); + cx25840_write4(client, DIF_BPF_COEFF2021, 0xff5df87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x058505aa); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5e4ff91); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf9f93c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf69d0d20); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0279f05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x06880ca3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1e6fb28); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 14900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x00060009); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffdf0004); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0051ffb0); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff9d00e8); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xfffcfe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x01280180); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd32ffd2); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413fd6e); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc4d05df); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x00d1f812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x043506e4); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf685fdfb); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c43fa8d); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf5a10c83); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0399f046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x05c70d08); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf222faf3); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffe5ffef); + cx25840_write4(client, DIF_BPF_COEFF67, 0x0057ffd9); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff7000c4); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0062fe68); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x009e01ff); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd95fee6); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0435fe7d); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb710530); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x023cf7ee); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x02c307ef); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf75efc70); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5cfbef); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf4c10bce); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x04b3f03f); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x05030d69); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf261fabf); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15100000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd); + cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xffefffdc); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00510006); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff540089); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00befe7c); + cx25840_write4(client, DIF_BPF_COEFF1213, 0x00060253); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe27fe0d); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413ffa2); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfad10446); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0390f812); + cx25840_write4(client, DIF_BPF_COEFF2223, 0x013b08c3); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf868faf6); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c43fd5f); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3fd0b02); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x05c7f046); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x043b0dc4); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2a1fa8b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15200000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001fffe); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc0012); + cx25840_write4(client, DIF_BPF_COEFF45, 0xfffbffce); + cx25840_write4(client, DIF_BPF_COEFF67, 0x003f0033); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff4e003f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0106feb6); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff6e0276); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xfeddfd56); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b000cc); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa740329); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x04bff87f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xffaa095d); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xf99ef995); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf9fed8); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3590a1f); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x06d2f05e); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x03700e1b); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2e4fa58); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15300000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9000f); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0009ffc8); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00250059); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff5effee); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0132ff10); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfee30265); + cx25840_write4(client, DIF_BPF_COEFF1415, 0xffaafccf); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x031101eb); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa6001e8); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x05bdf92f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe1b09b6); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfafaf852); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0055); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2d50929); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x07d3f086); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x02a30e6c); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf329fa24); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15400000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80009); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0015ffca); + cx25840_write4(client, DIF_BPF_COEFF67, 0x00050074); + cx25840_write4(client, DIF_BPF_COEFF89, 0xff81ff9f); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x013dff82); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe710221); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x007cfc80); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x024102ed); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa940090); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0680fa1e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc9b09cd); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfc73f736); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad501d0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2740820); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x08c9f0bd); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x01d40eb9); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf371f9f1); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15500000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80002); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001effd5); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5007f); + cx25840_write4(client, DIF_BPF_COEFF89, 0xffb4ff5b); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x01280000); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2401b0); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0146fc70); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d03c6); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb10ff32); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0701fb41); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb3709a1); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe00f644); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000345); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2350708); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x09b2f104); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x01050eff); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf3baf9be); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15600000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffb); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0022ffe6); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9007a); + cx25840_write4(client, DIF_BPF_COEFF89, 0xfff0ff29); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f2007e); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01011b); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x01f6fc9e); + cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440467); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbccfdde); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0738fc90); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9f70934); + cx25840_write4(client, DIF_BPF_COEFF2425, 0xff99f582); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x090204b0); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21a05e1); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0a8df15a); + cx25840_write4(client, DIF_BPF_COEFF3233, 0x00340f41); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf405f98b); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15700000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcfff4); + cx25840_write4(client, DIF_BPF_COEFF45, 0x0020fffa); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffb40064); + cx25840_write4(client, DIF_BPF_COEFF89, 0x002fff11); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x00a400f0); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0d006e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x0281fd09); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3604c9); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcbffca2); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0726fdfe); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8e80888); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x0134f4f3); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1060c); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf22304af); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b59f1be); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xff640f7d); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf452f959); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15800000: + cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0000fff0); + cx25840_write4(client, DIF_BPF_COEFF45, 0x001a0010); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffaa0041); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0067ff13); + cx25840_write4(client, DIF_BPF_COEFF1011, 0x0043014a); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe46ffb9); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02dbfda8); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3504e5); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xfddcfb8d); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c9ff7e); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf81107a2); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c9f49a); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0753); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2500373); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c14f231); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe930fb3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4a1f927); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 15900000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0002); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0003ffee); + cx25840_write4(client, DIF_BPF_COEFF45, 0x000f0023); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffac0016); + cx25840_write4(client, DIF_BPF_COEFF89, 0x0093ff31); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xffdc0184); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea6ff09); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fdfe70); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd5104ba); + cx25840_write4(client, DIF_BPF_COEFF1819, 0xff15faac); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x06270103); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7780688); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x044df479); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430883); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a00231); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cbef2b2); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc40fe3); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4f2f8f5); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + + case 16000000: + cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001); + cx25840_write4(client, DIF_BPF_COEFF23, 0x0006ffef); + cx25840_write4(client, DIF_BPF_COEFF45, 0x00020031); + cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffe8); + cx25840_write4(client, DIF_BPF_COEFF89, 0x00adff66); + cx25840_write4(client, DIF_BPF_COEFF1011, 0xff790198); + cx25840_write4(client, DIF_BPF_COEFF1213, 0xff26fe6e); + cx25840_write4(client, DIF_BPF_COEFF1415, 0x02e5ff55); + cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99044a); + cx25840_write4(client, DIF_BPF_COEFF1819, 0x005bfa09); + cx25840_write4(client, DIF_BPF_COEFF2021, 0x0545027f); + cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7230541); + cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b8f490); + cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20997); + cx25840_write4(client, DIF_BPF_COEFF2829, 0xf31300eb); + cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d55f341); + cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6100e); + cx25840_write4(client, DIF_BPF_COEFF3435, 0xf544f8c3); + cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000); + break; + } +} + +static void cx23888_std_setup(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + v4l2_std_id std = state->std; + u32 ifHz; + + cx25840_write4(client, 0x478, 0x6628021F); + cx25840_write4(client, 0x400, 0x0); + cx25840_write4(client, 0x4b4, 0x20524030); + cx25840_write4(client, 0x47c, 0x010a8263); + + if (std & V4L2_STD_NTSC) { + v4l_dbg(1, cx25840_debug, client, "%s() Selecting NTSC", + __func__); + + /* Horiz / vert timing */ + cx25840_write4(client, 0x428, 0x1e1e601a); + cx25840_write4(client, 0x424, 0x5b2d007a); + + /* DIF NTSC */ + cx25840_write4(client, 0x304, 0x6503bc0c); + cx25840_write4(client, 0x308, 0xbd038c85); + cx25840_write4(client, 0x30c, 0x1db4640a); + cx25840_write4(client, 0x310, 0x00008800); + cx25840_write4(client, 0x314, 0x44400400); + cx25840_write4(client, 0x32c, 0x0c800800); + cx25840_write4(client, 0x330, 0x27000100); + cx25840_write4(client, 0x334, 0x1f296e1f); + cx25840_write4(client, 0x338, 0x009f50c1); + cx25840_write4(client, 0x340, 0x1befbf06); + cx25840_write4(client, 0x344, 0x000035e8); + + /* DIF I/F */ + ifHz = 5400000; + + } else { + v4l_dbg(1, cx25840_debug, client, "%s() Selecting PAL-BG", + __func__); + + /* Horiz / vert timing */ + cx25840_write4(client, 0x428, 0x28244024); + cx25840_write4(client, 0x424, 0x5d2d0084); + + /* DIF */ + cx25840_write4(client, 0x304, 0x6503bc0c); + cx25840_write4(client, 0x308, 0xbd038c85); + cx25840_write4(client, 0x30c, 0x1db4640a); + cx25840_write4(client, 0x310, 0x00008800); + cx25840_write4(client, 0x314, 0x44400600); + cx25840_write4(client, 0x32c, 0x0c800800); + cx25840_write4(client, 0x330, 0x27000100); + cx25840_write4(client, 0x334, 0x213530ec); + cx25840_write4(client, 0x338, 0x00a65ba8); + cx25840_write4(client, 0x340, 0x1befbf06); + cx25840_write4(client, 0x344, 0x000035e8); + + /* DIF I/F */ + ifHz = 6000000; + } + + cx23885_dif_setup(client, ifHz); + + /* Explicitly ensure the inputs are reconfigured after + * a standard change. + */ + set_input(client, state->vid_input, state->aud_input); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops cx25840_ctrl_ops = { + .s_ctrl = cx25840_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops cx25840_core_ops = { + .log_status = cx25840_log_status, + .g_chip_ident = cx25840_g_chip_ident, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = cx25840_s_std, + .g_std = cx25840_g_std, + .reset = cx25840_reset, + .load_fw = cx25840_load_fw, + .s_io_pin_config = common_s_io_pin_config, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cx25840_g_register, + .s_register = cx25840_s_register, +#endif + .interrupt_service_routine = cx25840_irq_handler, +}; + +static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = { + .s_frequency = cx25840_s_frequency, + .s_radio = cx25840_s_radio, + .g_tuner = cx25840_g_tuner, + .s_tuner = cx25840_s_tuner, +}; + +static const struct v4l2_subdev_audio_ops cx25840_audio_ops = { + .s_clock_freq = cx25840_s_clock_freq, + .s_routing = cx25840_s_audio_routing, + .s_stream = cx25840_s_audio_stream, +}; + +static const struct v4l2_subdev_video_ops cx25840_video_ops = { + .s_routing = cx25840_s_video_routing, + .s_mbus_fmt = cx25840_s_mbus_fmt, + .s_stream = cx25840_s_stream, + .g_input_status = cx25840_g_input_status, +}; + +static const struct v4l2_subdev_vbi_ops cx25840_vbi_ops = { + .decode_vbi_line = cx25840_decode_vbi_line, + .s_raw_fmt = cx25840_s_raw_fmt, + .s_sliced_fmt = cx25840_s_sliced_fmt, + .g_sliced_fmt = cx25840_g_sliced_fmt, +}; + +static const struct v4l2_subdev_ops cx25840_ops = { + .core = &cx25840_core_ops, + .tuner = &cx25840_tuner_ops, + .audio = &cx25840_audio_ops, + .video = &cx25840_video_ops, + .vbi = &cx25840_vbi_ops, + .ir = &cx25840_ir_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static u32 get_cx2388x_ident(struct i2c_client *client) +{ + u32 ret; + + /* Come out of digital power down */ + cx25840_write(client, 0x000, 0); + + /* Detecting whether the part is cx23885/7/8 is more + * difficult than it needs to be. No ID register. Instead we + * probe certain registers indicated in the datasheets to look + * for specific defaults that differ between the silicon designs. */ + + /* It's either 885/7 if the IR Tx Clk Divider register exists */ + if (cx25840_read4(client, 0x204) & 0xffff) { + /* CX23885 returns bogus repetitive byte values for the DIF, + * which doesn't exist for it. (Ex. 8a8a8a8a or 31313131) */ + ret = cx25840_read4(client, 0x300); + if (((ret & 0xffff0000) >> 16) == (ret & 0xffff)) { + /* No DIF */ + ret = V4L2_IDENT_CX23885_AV; + } else { + /* CX23887 has a broken DIF, but the registers + * appear valid (but unused), good enough to detect. */ + ret = V4L2_IDENT_CX23887_AV; + } + } else if (cx25840_read4(client, 0x300) & 0x0fffffff) { + /* DIF PLL Freq Word reg exists; chip must be a CX23888 */ + ret = V4L2_IDENT_CX23888_AV; + } else { + v4l_err(client, "Unable to detect h/w, assuming cx23887\n"); + ret = V4L2_IDENT_CX23887_AV; + } + + /* Back into digital power down */ + cx25840_write(client, 0x000, 2); + return ret; +} + +static int cx25840_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct cx25840_state *state; + struct v4l2_subdev *sd; + int default_volume; + u32 id = V4L2_IDENT_NONE; + u16 device_id; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, cx25840_debug, client, "detecting cx25840 client on address 0x%x\n", client->addr << 1); + + device_id = cx25840_read(client, 0x101) << 8; + device_id |= cx25840_read(client, 0x100); + v4l_dbg(1, cx25840_debug, client, "device_id = 0x%04x\n", device_id); + + /* The high byte of the device ID should be + * 0x83 for the cx2583x and 0x84 for the cx2584x */ + if ((device_id & 0xff00) == 0x8300) { + id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; + } else if ((device_id & 0xff00) == 0x8400) { + id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf); + } else if (device_id == 0x0000) { + id = get_cx2388x_ident(client); + } else if ((device_id & 0xfff0) == 0x5A30) { + /* The CX23100 (0x5A3C = 23100) doesn't have an A/V decoder */ + id = V4L2_IDENT_CX2310X_AV; + } else if ((device_id & 0xff) == (device_id >> 8)) { + v4l_err(client, + "likely a confused/unresponsive cx2388[578] A/V decoder" + " found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + v4l_err(client, "A method to reset it from the cx25840 driver" + " software is not known at this time\n"); + return -ENODEV; + } else { + v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n"); + return -ENODEV; + } + + state = kzalloc(sizeof(struct cx25840_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &cx25840_ops); + + switch (id) { + case V4L2_IDENT_CX23885_AV: + v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX23887_AV: + v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX23888_AV: + v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX2310X_AV: + v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n", + device_id, client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX25840: + case V4L2_IDENT_CX25841: + case V4L2_IDENT_CX25842: + case V4L2_IDENT_CX25843: + /* Note: revision '(device_id & 0x0f) == 2' was never built. The + marking skips from 0x1 == 22 to 0x3 == 23. */ + v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n", + (device_id & 0xfff0) >> 4, + (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 + : (device_id & 0x0f), + client->addr << 1, client->adapter->name); + break; + case V4L2_IDENT_CX25836: + case V4L2_IDENT_CX25837: + default: + v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n", + (device_id & 0xfff0) >> 4, device_id & 0x0f, + client->addr << 1, client->adapter->name); + break; + } + + state->c = client; + state->vid_input = CX25840_COMPOSITE7; + state->aud_input = CX25840_AUDIO8; + state->audclk_freq = 48000; + state->audmode = V4L2_TUNER_MODE_LANG1; + state->vbi_line_offset = 8; + state->id = id; + state->rev = device_id; + v4l2_ctrl_handler_init(&state->hdl, 9); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + if (!is_cx2583x(state)) { + default_volume = cx25840_read(client, 0x8d4); + /* + * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume + * scale mapping limits to avoid -ERANGE errors when + * initializing the volume control + */ + if (default_volume > 228) { + /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */ + default_volume = 228; + cx25840_write(client, 0x8d4, 228); + } + else if (default_volume < 20) { + /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */ + default_volume = 20; + cx25840_write(client, 0x8d4, 20); + } + default_volume = (((228 - default_volume) >> 1) + 23) << 9; + + state->volume = v4l2_ctrl_new_std(&state->hdl, + &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, + 0, 65535, 65535 / 100, default_volume); + state->mute = v4l2_ctrl_new_std(&state->hdl, + &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE, + 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, + V4L2_CID_AUDIO_BASS, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, + 0, 65535, 65535 / 100, 32768); + } + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + if (!is_cx2583x(state)) + v4l2_ctrl_cluster(2, &state->volume); + v4l2_ctrl_handler_setup(&state->hdl); + + if (client->dev.platform_data) { + struct cx25840_platform_data *pdata = client->dev.platform_data; + + state->pvr150_workaround = pdata->pvr150_workaround; + } + + cx25840_ir_probe(sd); + return 0; +} + +static int cx25840_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cx25840_state *state = to_state(sd); + + cx25840_ir_remove(sd); + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id cx25840_id[] = { + { "cx25840", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cx25840_id); + +static struct i2c_driver cx25840_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cx25840", + }, + .probe = cx25840_probe, + .remove = cx25840_remove, + .id_table = cx25840_id, +}; + +module_i2c_driver(cx25840_driver); diff --git a/drivers/media/i2c/cx25840/cx25840-core.h b/drivers/media/i2c/cx25840/cx25840-core.h new file mode 100644 index 000000000000..bd4ada28b490 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-core.h @@ -0,0 +1,137 @@ +/* cx25840 internal API header + * + * Copyright (C) 2003-2004 Chris Kennedy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _CX25840_CORE_H_ +#define _CX25840_CORE_H_ + + +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <linux/i2c.h> + +struct cx25840_ir_state; + +struct cx25840_state { + struct i2c_client *c; + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* volume cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *mute; + }; + int pvr150_workaround; + int radio; + v4l2_std_id std; + enum cx25840_video_input vid_input; + enum cx25840_audio_input aud_input; + u32 audclk_freq; + int audmode; + int vbi_line_offset; + u32 id; + u32 rev; + int is_initialized; + wait_queue_head_t fw_wait; /* wake up when the fw load is finished */ + struct work_struct fw_work; /* work entry for fw load */ + struct cx25840_ir_state *ir_state; +}; + +static inline struct cx25840_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cx25840_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cx25840_state, hdl)->sd; +} + +static inline bool is_cx2583x(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX25836 || + state->id == V4L2_IDENT_CX25837; +} + +static inline bool is_cx231xx(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX2310X_AV; +} + +static inline bool is_cx2388x(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23885_AV || + state->id == V4L2_IDENT_CX23887_AV || + state->id == V4L2_IDENT_CX23888_AV; +} + +static inline bool is_cx23885(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23885_AV; +} + +static inline bool is_cx23887(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23887_AV; +} + +static inline bool is_cx23888(struct cx25840_state *state) +{ + return state->id == V4L2_IDENT_CX23888_AV; +} + +/* ----------------------------------------------------------------------- */ +/* cx25850-core.c */ +int cx25840_write(struct i2c_client *client, u16 addr, u8 value); +int cx25840_write4(struct i2c_client *client, u16 addr, u32 value); +u8 cx25840_read(struct i2c_client *client, u16 addr); +u32 cx25840_read4(struct i2c_client *client, u16 addr); +int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value); +int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask, + u32 or_value); +void cx25840_std_setup(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ +/* cx25850-firmware.c */ +int cx25840_loadfw(struct i2c_client *client); + +/* ----------------------------------------------------------------------- */ +/* cx25850-audio.c */ +void cx25840_audio_set_path(struct i2c_client *client); +int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + +extern const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops; + +/* ----------------------------------------------------------------------- */ +/* cx25850-vbi.c */ +int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt); +int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi); + +/* ----------------------------------------------------------------------- */ +/* cx25850-ir.c */ +extern const struct v4l2_subdev_ir_ops cx25840_ir_ops; +int cx25840_ir_log_status(struct v4l2_subdev *sd); +int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled); +int cx25840_ir_probe(struct v4l2_subdev *sd); +int cx25840_ir_remove(struct v4l2_subdev *sd); + +#endif diff --git a/drivers/media/i2c/cx25840/cx25840-firmware.c b/drivers/media/i2c/cx25840/cx25840-firmware.c new file mode 100644 index 000000000000..b3169f94ece8 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-firmware.c @@ -0,0 +1,175 @@ +/* cx25840 firmware functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/firmware.h> +#include <media/v4l2-common.h> +#include <media/cx25840.h> + +#include "cx25840-core.h" + +/* + * Mike Isely <isely@pobox.com> - The FWSEND parameter controls the + * size of the firmware chunks sent down the I2C bus to the chip. + * Previously this had been set to 1024 but unfortunately some I2C + * implementations can't transfer data in such big gulps. + * Specifically, the pvrusb2 driver has a hard limit of around 60 + * bytes, due to the encapsulation there of I2C traffic into USB + * messages. So we have to significantly reduce this parameter. + */ +#define FWSEND 48 + +#define FWDEV(x) &((x)->dev) + +static char *firmware = ""; + +module_param(firmware, charp, 0444); + +MODULE_PARM_DESC(firmware, "Firmware image to load"); + +static void start_fw_load(struct i2c_client *client) +{ + /* DL_ADDR_LB=0 DL_ADDR_HB=0 */ + cx25840_write(client, 0x800, 0x00); + cx25840_write(client, 0x801, 0x00); + // DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1 + cx25840_write(client, 0x803, 0x0b); + /* AUTO_INC_DIS=1 */ + cx25840_write(client, 0x000, 0x20); +} + +static void end_fw_load(struct i2c_client *client) +{ + /* AUTO_INC_DIS=0 */ + cx25840_write(client, 0x000, 0x00); + /* DL_ENABLE=0 */ + cx25840_write(client, 0x803, 0x03); +} + +#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw" +#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw" +#define CX25840_FIRMWARE "v4l-cx25840.fw" + +static const char *get_fw_name(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (firmware[0]) + return firmware; + if (is_cx2388x(state)) + return CX2388x_FIRMWARE; + if (is_cx231xx(state)) + return CX231xx_FIRMWARE; + return CX25840_FIRMWARE; +} + +static int check_fw_load(struct i2c_client *client, int size) +{ + /* DL_ADDR_HB DL_ADDR_LB */ + int s = cx25840_read(client, 0x801) << 8; + s |= cx25840_read(client, 0x800); + + if (size != s) { + v4l_err(client, "firmware %s load failed\n", + get_fw_name(client)); + return -EINVAL; + } + + v4l_info(client, "loaded %s firmware (%d bytes)\n", + get_fw_name(client), size); + return 0; +} + +static int fw_write(struct i2c_client *client, const u8 *data, int size) +{ + if (i2c_master_send(client, data, size) < size) { + v4l_err(client, "firmware load i2c failure\n"); + return -ENOSYS; + } + + return 0; +} + +int cx25840_loadfw(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + const struct firmware *fw = NULL; + u8 buffer[FWSEND]; + const u8 *ptr; + const char *fwname = get_fw_name(client); + int size, retval; + int MAX_BUF_SIZE = FWSEND; + u32 gpio_oe = 0, gpio_da = 0; + + if (is_cx2388x(state)) { + /* Preserve the GPIO OE and output bits */ + gpio_oe = cx25840_read(client, 0x160); + gpio_da = cx25840_read(client, 0x164); + } + + if (is_cx231xx(state) && MAX_BUF_SIZE > 16) { + v4l_err(client, " Firmware download size changed to 16 bytes max length\n"); + MAX_BUF_SIZE = 16; /* cx231xx cannot accept more than 16 bytes at a time */ + } + + if (request_firmware(&fw, fwname, FWDEV(client)) != 0) { + v4l_err(client, "unable to open firmware %s\n", fwname); + return -EINVAL; + } + + start_fw_load(client); + + buffer[0] = 0x08; + buffer[1] = 0x02; + + size = fw->size; + ptr = fw->data; + while (size > 0) { + int len = min(MAX_BUF_SIZE - 2, size); + + memcpy(buffer + 2, ptr, len); + + retval = fw_write(client, buffer, len + 2); + + if (retval < 0) { + release_firmware(fw); + return retval; + } + + size -= len; + ptr += len; + } + + end_fw_load(client); + + size = fw->size; + release_firmware(fw); + + if (is_cx2388x(state)) { + /* Restore GPIO configuration after f/w load */ + cx25840_write(client, 0x160, gpio_oe); + cx25840_write(client, 0x164, gpio_da); + } + + return check_fw_load(client, size); +} + +MODULE_FIRMWARE(CX2388x_FIRMWARE); +MODULE_FIRMWARE(CX231xx_FIRMWARE); +MODULE_FIRMWARE(CX25840_FIRMWARE); + diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c new file mode 100644 index 000000000000..38ce76ed1924 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-ir.c @@ -0,0 +1,1281 @@ +/* + * Driver for the Conexant CX2584x Audio/Video decoder chip and related cores + * + * Integrated Consumer Infrared Controller + * + * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/slab.h> +#include <linux/kfifo.h> +#include <linux/module.h> +#include <media/cx25840.h> +#include <media/rc-core.h> + +#include "cx25840-core.h" + +static unsigned int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages"); + +#define CX25840_IR_REG_BASE 0x200 + +#define CX25840_IR_CNTRL_REG 0x200 +#define CNTRL_WIN_3_3 0x00000000 +#define CNTRL_WIN_4_3 0x00000001 +#define CNTRL_WIN_3_4 0x00000002 +#define CNTRL_WIN_4_4 0x00000003 +#define CNTRL_WIN 0x00000003 +#define CNTRL_EDG_NONE 0x00000000 +#define CNTRL_EDG_FALL 0x00000004 +#define CNTRL_EDG_RISE 0x00000008 +#define CNTRL_EDG_BOTH 0x0000000C +#define CNTRL_EDG 0x0000000C +#define CNTRL_DMD 0x00000010 +#define CNTRL_MOD 0x00000020 +#define CNTRL_RFE 0x00000040 +#define CNTRL_TFE 0x00000080 +#define CNTRL_RXE 0x00000100 +#define CNTRL_TXE 0x00000200 +#define CNTRL_RIC 0x00000400 +#define CNTRL_TIC 0x00000800 +#define CNTRL_CPL 0x00001000 +#define CNTRL_LBM 0x00002000 +#define CNTRL_R 0x00004000 + +#define CX25840_IR_TXCLK_REG 0x204 +#define TXCLK_TCD 0x0000FFFF + +#define CX25840_IR_RXCLK_REG 0x208 +#define RXCLK_RCD 0x0000FFFF + +#define CX25840_IR_CDUTY_REG 0x20C +#define CDUTY_CDC 0x0000000F + +#define CX25840_IR_STATS_REG 0x210 +#define STATS_RTO 0x00000001 +#define STATS_ROR 0x00000002 +#define STATS_RBY 0x00000004 +#define STATS_TBY 0x00000008 +#define STATS_RSR 0x00000010 +#define STATS_TSR 0x00000020 + +#define CX25840_IR_IRQEN_REG 0x214 +#define IRQEN_RTE 0x00000001 +#define IRQEN_ROE 0x00000002 +#define IRQEN_RSE 0x00000010 +#define IRQEN_TSE 0x00000020 +#define IRQEN_MSK 0x00000033 + +#define CX25840_IR_FILTR_REG 0x218 +#define FILTR_LPF 0x0000FFFF + +#define CX25840_IR_FIFO_REG 0x23C +#define FIFO_RXTX 0x0000FFFF +#define FIFO_RXTX_LVL 0x00010000 +#define FIFO_RXTX_RTO 0x0001FFFF +#define FIFO_RX_NDV 0x00020000 +#define FIFO_RX_DEPTH 8 +#define FIFO_TX_DEPTH 8 + +#define CX25840_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */ +#define CX25840_IR_REFCLK_FREQ (CX25840_VIDCLK_FREQ / 2) + +/* + * We use this union internally for convenience, but callers to tx_write + * and rx_read will be expecting records of type struct ir_raw_event. + * Always ensure the size of this union is dictated by struct ir_raw_event. + */ +union cx25840_ir_fifo_rec { + u32 hw_fifo_data; + struct ir_raw_event ir_core_data; +}; + +#define CX25840_IR_RX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec)) +#define CX25840_IR_TX_KFIFO_SIZE (256 * sizeof(union cx25840_ir_fifo_rec)) + +struct cx25840_ir_state { + struct i2c_client *c; + + struct v4l2_subdev_ir_parameters rx_params; + struct mutex rx_params_lock; /* protects Rx parameter settings cache */ + atomic_t rxclk_divider; + atomic_t rx_invert; + + struct kfifo rx_kfifo; + spinlock_t rx_kfifo_lock; /* protect Rx data kfifo */ + + struct v4l2_subdev_ir_parameters tx_params; + struct mutex tx_params_lock; /* protects Tx parameter settings cache */ + atomic_t txclk_divider; +}; + +static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + return state ? state->ir_state : NULL; +} + + +/* + * Rx and Tx Clock Divider register computations + * + * Note the largest clock divider value of 0xffff corresponds to: + * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_clock_divider(unsigned int d) +{ + if (d > RXCLK_RCD + 1) + d = RXCLK_RCD; + else if (d < 2) + d = 1; + else + d--; + return (u16) d; +} + +static inline u16 ns_to_clock_divider(unsigned int ns) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int clock_divider_to_ns(unsigned int divider) +{ + /* Period of the Rx or Tx clock in ns */ + return DIV_ROUND_CLOSEST((divider + 1) * 1000, + CX25840_IR_REFCLK_FREQ / 1000000); +} + +static inline u16 carrier_freq_to_clock_divider(unsigned int freq) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * 16)); +} + +static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider) +{ + return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, (divider + 1) * 16); +} + +static inline u16 freq_to_clock_divider(unsigned int freq, + unsigned int rollovers) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * rollovers)); +} + +static inline unsigned int clock_divider_to_freq(unsigned int divider, + unsigned int rollovers) +{ + return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, + (divider + 1) * rollovers); +} + +/* + * Low Pass Filter register calculations + * + * Note the largest count value of 0xffff corresponds to: + * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_lpf_count(unsigned int d) +{ + if (d > FILTR_LPF) + d = FILTR_LPF; + else if (d < 4) + d = 0; + return (u16) d; +} + +static inline u16 ns_to_lpf_count(unsigned int ns) +{ + return count_to_lpf_count( + DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int lpf_count_to_ns(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in ns */ + return DIV_ROUND_CLOSEST(count * 1000, + CX25840_IR_REFCLK_FREQ / 1000000); +} + +static inline unsigned int lpf_count_to_us(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in us */ + return DIV_ROUND_CLOSEST(count, CX25840_IR_REFCLK_FREQ / 1000000); +} + +/* + * FIFO register pulse width count compuations + */ +static u32 clock_divider_to_resolution(u16 divider) +{ + /* + * Resolution is the duration of 1 tick of the readable portion of + * of the pulse width counter as read from the FIFO. The two lsb's are + * not readable, hence the << 2. This function returns ns. + */ + return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000, + CX25840_IR_REFCLK_FREQ / 1000000); +} + +static u64 pulse_width_count_to_ns(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */ + rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */ + if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return n; +} + +#if 0 +/* Keep as we will need this for Transmit functionality */ +static u16 ns_to_pulse_width_count(u32 ns, u16 divider) +{ + u64 n; + u32 d; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not accessible, hence + * the (1 << 2) + */ + n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */ + d = (1 << 2) * ((u32) divider + 1) * 1000; /* millicycles/count */ + rem = do_div(n, d); + if (rem >= d / 2) + n++; + + if (n > FIFO_RXTX) + n = FIFO_RXTX; + else if (n == 0) + n = 1; + return (u16) n; +} + +#endif +static unsigned int pulse_width_count_to_us(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */ + rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => us */ + if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return (unsigned int) n; +} + +/* + * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts + * + * The total pulse clock count is an 18 bit pulse width timer count as the most + * significant part and (up to) 16 bit clock divider count as a modulus. + * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse + * width timer count's least significant bit. + */ +static u64 ns_to_pulse_clocks(u32 ns) +{ + u64 clocks; + u32 rem; + clocks = CX25840_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */ + rem = do_div(clocks, 1000); /* /1000 = cycles */ + if (rem >= 1000 / 2) + clocks++; + return clocks; +} + +static u16 pulse_clocks_to_clock_divider(u64 count) +{ + do_div(count, (FIFO_RXTX << 2) | 0x3); + + /* net result needs to be rounded down and decremented by 1 */ + if (count > RXCLK_RCD + 1) + count = RXCLK_RCD; + else if (count < 2) + count = 1; + else + count--; + return (u16) count; +} + +/* + * IR Control Register helpers + */ +enum tx_fifo_watermark { + TX_FIFO_HALF_EMPTY = 0, + TX_FIFO_EMPTY = CNTRL_TIC, +}; + +enum rx_fifo_watermark { + RX_FIFO_HALF_FULL = 0, + RX_FIFO_NOT_EMPTY = CNTRL_RIC, +}; + +static inline void control_tx_irq_watermark(struct i2c_client *c, + enum tx_fifo_watermark level) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_TIC, level); +} + +static inline void control_rx_irq_watermark(struct i2c_client *c, + enum rx_fifo_watermark level) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_RIC, level); +} + +static inline void control_tx_enable(struct i2c_client *c, bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE), + enable ? (CNTRL_TXE | CNTRL_TFE) : 0); +} + +static inline void control_rx_enable(struct i2c_client *c, bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE), + enable ? (CNTRL_RXE | CNTRL_RFE) : 0); +} + +static inline void control_tx_modulation_enable(struct i2c_client *c, + bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_MOD, + enable ? CNTRL_MOD : 0); +} + +static inline void control_rx_demodulation_enable(struct i2c_client *c, + bool enable) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_DMD, + enable ? CNTRL_DMD : 0); +} + +static inline void control_rx_s_edge_detection(struct i2c_client *c, + u32 edge_types) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_EDG_BOTH, + edge_types & CNTRL_EDG_BOTH); +} + +static void control_rx_s_carrier_window(struct i2c_client *c, + unsigned int carrier, + unsigned int *carrier_range_low, + unsigned int *carrier_range_high) +{ + u32 v; + unsigned int c16 = carrier * 16; + + if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) { + v = CNTRL_WIN_3_4; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4); + } else { + v = CNTRL_WIN_3_3; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3); + } + + if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) { + v |= CNTRL_WIN_4_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4); + } else { + v |= CNTRL_WIN_3_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3); + } + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_WIN, v); +} + +static inline void control_tx_polarity_invert(struct i2c_client *c, + bool invert) +{ + cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_CPL, + invert ? CNTRL_CPL : 0); +} + +/* + * IR Rx & Tx Clock Register helpers + */ +static unsigned int txclk_tx_s_carrier(struct i2c_client *c, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static unsigned int rxclk_rx_s_carrier(struct i2c_client *c, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +/* + * IR Tx Carrier Duty Cycle register helpers + */ +static unsigned int cduty_tx_s_duty_cycle(struct i2c_client *c, + unsigned int duty_cycle) +{ + u32 n; + n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */ + if (n != 0) + n--; + if (n > 15) + n = 15; + cx25840_write4(c, CX25840_IR_CDUTY_REG, n); + return DIV_ROUND_CLOSEST((n + 1) * 100, 16); +} + +/* + * IR Filter Register helpers + */ +static u32 filter_rx_s_min_width(struct i2c_client *c, u32 min_width_ns) +{ + u32 count = ns_to_lpf_count(min_width_ns); + cx25840_write4(c, CX25840_IR_FILTR_REG, count); + return lpf_count_to_ns(count); +} + +/* + * IR IRQ Enable Register helpers + */ +static inline void irqenable_rx(struct v4l2_subdev *sd, u32 mask) +{ + struct cx25840_state *state = to_state(sd); + + if (is_cx23885(state) || is_cx23887(state)) + mask ^= IRQEN_MSK; + mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE); + cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, + ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask); +} + +static inline void irqenable_tx(struct v4l2_subdev *sd, u32 mask) +{ + struct cx25840_state *state = to_state(sd); + + if (is_cx23885(state) || is_cx23887(state)) + mask ^= IRQEN_MSK; + mask &= IRQEN_TSE; + cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, ~IRQEN_TSE, mask); +} + +/* + * V4L2 Subdevice IR Ops + */ +int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + struct cx25840_state *state = to_state(sd); + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c = NULL; + unsigned long flags; + + union cx25840_ir_fifo_rec rx_data[FIFO_RX_DEPTH]; + unsigned int i, j, k; + u32 events, v; + int tsr, rsr, rto, ror, tse, rse, rte, roe, kror; + u32 cntrl, irqen, stats; + + *handled = false; + if (ir_state == NULL) + return -ENODEV; + + c = ir_state->c; + + /* Only support the IR controller for the CX2388[57] AV Core for now */ + if (!(is_cx23885(state) || is_cx23887(state))) + return -ENODEV; + + cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG); + irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG); + if (is_cx23885(state) || is_cx23887(state)) + irqen ^= IRQEN_MSK; + stats = cx25840_read4(c, CX25840_IR_STATS_REG); + + tsr = stats & STATS_TSR; /* Tx FIFO Service Request */ + rsr = stats & STATS_RSR; /* Rx FIFO Service Request */ + rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */ + ror = stats & STATS_ROR; /* Rx FIFO Over Run */ + + tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */ + rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */ + rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */ + roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */ + + v4l2_dbg(2, ir_debug, sd, "IR IRQ Status: %s %s %s %s %s %s\n", + tsr ? "tsr" : " ", rsr ? "rsr" : " ", + rto ? "rto" : " ", ror ? "ror" : " ", + stats & STATS_TBY ? "tby" : " ", + stats & STATS_RBY ? "rby" : " "); + + v4l2_dbg(2, ir_debug, sd, "IR IRQ Enables: %s %s %s %s\n", + tse ? "tse" : " ", rse ? "rse" : " ", + rte ? "rte" : " ", roe ? "roe" : " "); + + /* + * Transmitter interrupt service + */ + if (tse && tsr) { + /* + * TODO: + * Check the watermark threshold setting + * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo + * Push the data to the hardware FIFO. + * If there was nothing more to send in the tx_kfifo, disable + * the TSR IRQ and notify the v4l2_device. + * If there was something in the tx_kfifo, check the tx_kfifo + * level and notify the v4l2_device, if it is low. + */ + /* For now, inhibit TSR interrupt until Tx is implemented */ + irqenable_tx(sd, 0); + events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ; + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events); + *handled = true; + } + + /* + * Receiver interrupt service + */ + kror = 0; + if ((rse && rsr) || (rte && rto)) { + /* + * Receive data on RSR to clear the STATS_RSR. + * Receive data on RTO, since we may not have yet hit the RSR + * watermark when we receive the RTO. + */ + for (i = 0, v = FIFO_RX_NDV; + (v & FIFO_RX_NDV) && !kror; i = 0) { + for (j = 0; + (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) { + v = cx25840_read4(c, CX25840_IR_FIFO_REG); + rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV; + i++; + } + if (i == 0) + break; + j = i * sizeof(union cx25840_ir_fifo_rec); + k = kfifo_in_locked(&ir_state->rx_kfifo, + (unsigned char *) rx_data, j, + &ir_state->rx_kfifo_lock); + if (k != j) + kror++; /* rx_kfifo over run */ + } + *handled = true; + } + + events = 0; + v = 0; + if (kror) { + events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver software FIFO overrun\n"); + } + if (roe && ror) { + /* + * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear + * the Rx FIFO Over Run status (STATS_ROR) + */ + v |= CNTRL_RFE; + events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver hardware FIFO overrun\n"); + } + if (rte && rto) { + /* + * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear + * the Rx Pulse Width Timer Time Out (STATS_RTO) + */ + v |= CNTRL_RXE; + events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; + } + if (v) { + /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */ + cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl & ~v); + cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl); + *handled = true; + } + spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags); + if (kfifo_len(&ir_state->rx_kfifo) >= CX25840_IR_RX_KFIFO_SIZE / 2) + events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags); + + if (events) + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events); + return 0; +} + +/* Receiver */ +static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + bool invert; + u16 divider; + unsigned int i, n; + union cx25840_ir_fifo_rec *p; + unsigned u, v, w; + + if (ir_state == NULL) + return -ENODEV; + + invert = (bool) atomic_read(&ir_state->rx_invert); + divider = (u16) atomic_read(&ir_state->rxclk_divider); + + n = count / sizeof(union cx25840_ir_fifo_rec) + * sizeof(union cx25840_ir_fifo_rec); + if (n == 0) { + *num = 0; + return 0; + } + + n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n, + &ir_state->rx_kfifo_lock); + + n /= sizeof(union cx25840_ir_fifo_rec); + *num = n * sizeof(union cx25840_ir_fifo_rec); + + for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) { + + if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) { + /* Assume RTO was because of no IR light input */ + u = 0; + w = 1; + } else { + u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0; + if (invert) + u = u ? 0 : 1; + w = 0; + } + + v = (unsigned) pulse_width_count_to_ns( + (u16) (p->hw_fifo_data & FIFO_RXTX), divider); + if (v > IR_MAX_DURATION) + v = IR_MAX_DURATION; + + init_ir_raw_event(&p->ir_core_data); + p->ir_core_data.pulse = u; + p->ir_core_data.duration = v; + p->ir_core_data.timeout = w; + + v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns %s %s\n", + v, u ? "mark" : "space", w ? "(timed out)" : ""); + if (w) + v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n"); + } + return 0; +} + +static int cx25840_ir_rx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + + mutex_lock(&ir_state->rx_params_lock); + memcpy(p, &ir_state->rx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&ir_state->rx_params_lock); + return 0; +} + +static int cx25840_ir_rx_shutdown(struct v4l2_subdev *sd) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + + if (ir_state == NULL) + return -ENODEV; + + c = ir_state->c; + mutex_lock(&ir_state->rx_params_lock); + + /* Disable or slow down all IR Rx circuits and counters */ + irqenable_rx(sd, 0); + control_rx_enable(c, false); + control_rx_demodulation_enable(c, false); + control_rx_s_edge_detection(c, CNTRL_EDG_NONE); + filter_rx_s_min_width(c, 0); + cx25840_write4(c, CX25840_IR_RXCLK_REG, RXCLK_RCD); + + ir_state->rx_params.shutdown = true; + + mutex_unlock(&ir_state->rx_params_lock); + return 0; +} + +static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + struct v4l2_subdev_ir_parameters *o; + u16 rxclk_divider; + + if (ir_state == NULL) + return -ENODEV; + + if (p->shutdown) + return cx25840_ir_rx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + c = ir_state->c; + o = &ir_state->rx_params; + + mutex_lock(&ir_state->rx_params_lock); + + o->shutdown = p->shutdown; + + p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + o->mode = p->mode; + + p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec); + o->bytes_per_data_element = p->bytes_per_data_element; + + /* Before we tweak the hardware, we have to disable the receiver */ + irqenable_rx(sd, 0); + control_rx_enable(c, false); + + control_rx_demodulation_enable(c, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = rxclk_rx_s_carrier(c, p->carrier_freq, + &rxclk_divider); + + o->carrier_freq = p->carrier_freq; + + p->duty_cycle = 50; + o->duty_cycle = p->duty_cycle; + + control_rx_s_carrier_window(c, p->carrier_freq, + &p->carrier_range_lower, + &p->carrier_range_upper); + o->carrier_range_lower = p->carrier_range_lower; + o->carrier_range_upper = p->carrier_range_upper; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider); + } else { + p->max_pulse_width = + rxclk_rx_s_max_pulse_width(c, p->max_pulse_width, + &rxclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&ir_state->rxclk_divider, rxclk_divider); + + p->noise_filter_min_width = + filter_rx_s_min_width(c, p->noise_filter_min_width); + o->noise_filter_min_width = p->noise_filter_min_width; + + p->resolution = clock_divider_to_resolution(rxclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_rx_irq_watermark(c, RX_FIFO_HALF_FULL); + + control_rx_s_edge_detection(c, CNTRL_EDG_BOTH); + + o->invert_level = p->invert_level; + atomic_set(&ir_state->rx_invert, p->invert_level); + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + unsigned long flags; + + spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags); + kfifo_reset(&ir_state->rx_kfifo); + spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags); + if (p->interrupt_enable) + irqenable_rx(sd, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE); + control_rx_enable(c, p->enable); + } + + mutex_unlock(&ir_state->rx_params_lock); + return 0; +} + +/* Transmitter */ +static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + +#if 0 + /* + * FIXME - the code below is an incomplete and untested sketch of what + * may need to be done. The critical part is to get 4 (or 8) pulses + * from the tx_kfifo, or converted from ns to the proper units from the + * input, and push them off to the hardware Tx FIFO right away, if the + * HW TX fifo needs service. The rest can be pushed to the tx_kfifo in + * a less critical timeframe. Also watch out for overruning the + * tx_kfifo - don't let it happen and let the caller know not all his + * pulses were written. + */ + u32 *ns_pulse = (u32 *) buf; + unsigned int n; + u32 fifo_pulse[FIFO_TX_DEPTH]; + u32 mark; + + /* Compute how much we can fit in the tx kfifo */ + n = CX25840_IR_TX_KFIFO_SIZE - kfifo_len(ir_state->tx_kfifo); + n = min(n, (unsigned int) count); + n /= sizeof(u32); + + /* FIXME - turn on Tx Fifo service interrupt + * check hardware fifo level, and other stuff + */ + for (i = 0; i < n; ) { + for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) { + mark = ns_pulse[i] & LEVEL_MASK; + fifo_pulse[j] = ns_to_pulse_width_count( + ns_pulse[i] & + ~LEVEL_MASK, + ir_state->txclk_divider); + if (mark) + fifo_pulse[j] &= FIFO_RXTX_LVL; + i++; + } + kfifo_put(ir_state->tx_kfifo, (u8 *) fifo_pulse, + j * sizeof(u32)); + } + *num = n * sizeof(u32); +#else + /* For now enable the Tx FIFO Service interrupt & pretend we did work */ + irqenable_tx(sd, IRQEN_TSE); + *num = count; +#endif + return 0; +} + +static int cx25840_ir_tx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + + mutex_lock(&ir_state->tx_params_lock); + memcpy(p, &ir_state->tx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&ir_state->tx_params_lock); + return 0; +} + +static int cx25840_ir_tx_shutdown(struct v4l2_subdev *sd) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + + if (ir_state == NULL) + return -ENODEV; + + c = ir_state->c; + mutex_lock(&ir_state->tx_params_lock); + + /* Disable or slow down all IR Tx circuits and counters */ + irqenable_tx(sd, 0); + control_tx_enable(c, false); + control_tx_modulation_enable(c, false); + cx25840_write4(c, CX25840_IR_TXCLK_REG, TXCLK_TCD); + + ir_state->tx_params.shutdown = true; + + mutex_unlock(&ir_state->tx_params_lock); + return 0; +} + +static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx25840_ir_state *ir_state = to_ir_state(sd); + struct i2c_client *c; + struct v4l2_subdev_ir_parameters *o; + u16 txclk_divider; + + if (ir_state == NULL) + return -ENODEV; + + if (p->shutdown) + return cx25840_ir_tx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + c = ir_state->c; + o = &ir_state->tx_params; + mutex_lock(&ir_state->tx_params_lock); + + o->shutdown = p->shutdown; + + p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + o->mode = p->mode; + + p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec); + o->bytes_per_data_element = p->bytes_per_data_element; + + /* Before we tweak the hardware, we have to disable the transmitter */ + irqenable_tx(sd, 0); + control_tx_enable(c, false); + + control_tx_modulation_enable(c, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = txclk_tx_s_carrier(c, p->carrier_freq, + &txclk_divider); + o->carrier_freq = p->carrier_freq; + + p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle); + o->duty_cycle = p->duty_cycle; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider); + } else { + p->max_pulse_width = + txclk_tx_s_max_pulse_width(c, p->max_pulse_width, + &txclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&ir_state->txclk_divider, txclk_divider); + + p->resolution = clock_divider_to_resolution(txclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_tx_irq_watermark(c, TX_FIFO_HALF_EMPTY); + + control_tx_polarity_invert(c, p->invert_carrier_sense); + o->invert_carrier_sense = p->invert_carrier_sense; + + /* + * FIXME: we don't have hardware help for IO pin level inversion + * here like we have on the CX23888. + * Act on this with some mix of logical inversion of data levels, + * carrier polarity, and carrier duty cycle. + */ + o->invert_level = p->invert_level; + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + /* reset tx_fifo here */ + if (p->interrupt_enable) + irqenable_tx(sd, IRQEN_TSE); + control_tx_enable(c, p->enable); + } + + mutex_unlock(&ir_state->tx_params_lock); + return 0; +} + + +/* + * V4L2 Subdevice Core Ops support + */ +int cx25840_ir_log_status(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct i2c_client *c = state->c; + char *s; + int i, j; + u32 cntrl, txclk, rxclk, cduty, stats, irqen, filtr; + + /* The CX23888 chip doesn't have an IR controller on the A/V core */ + if (is_cx23888(state)) + return 0; + + cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG); + txclk = cx25840_read4(c, CX25840_IR_TXCLK_REG) & TXCLK_TCD; + rxclk = cx25840_read4(c, CX25840_IR_RXCLK_REG) & RXCLK_RCD; + cduty = cx25840_read4(c, CX25840_IR_CDUTY_REG) & CDUTY_CDC; + stats = cx25840_read4(c, CX25840_IR_STATS_REG); + irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG); + if (is_cx23885(state) || is_cx23887(state)) + irqen ^= IRQEN_MSK; + filtr = cx25840_read4(c, CX25840_IR_FILTR_REG) & FILTR_LPF; + + v4l2_info(sd, "IR Receiver:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_RXE ? "yes" : "no"); + v4l2_info(sd, "\tDemodulation from a carrier: %s\n", + cntrl & CNTRL_DMD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_RFE ? "enabled" : "disabled"); + switch (cntrl & CNTRL_EDG) { + case CNTRL_EDG_NONE: + s = "disabled"; + break; + case CNTRL_EDG_FALL: + s = "falling edge"; + break; + case CNTRL_EDG_RISE: + s = "rising edge"; + break; + case CNTRL_EDG_BOTH: + s = "rising & falling edges"; + break; + default: + s = "??? edge"; + break; + } + v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s); + v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n", + cntrl & CNTRL_R ? "not loaded" : "overflow marker"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_RIC ? "not empty" : "half full or greater"); + v4l2_info(sd, "\tLoopback mode: %s\n", + cntrl & CNTRL_LBM ? "loopback active" : "normal receive"); + if (cntrl & CNTRL_DMD) { + v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(rxclk)); + switch (cntrl & CNTRL_WIN) { + case CNTRL_WIN_3_3: + i = 3; + j = 3; + break; + case CNTRL_WIN_4_3: + i = 4; + j = 3; + break; + case CNTRL_WIN_3_4: + i = 3; + j = 4; + break; + case CNTRL_WIN_4_4: + i = 4; + j = 4; + break; + default: + i = 0; + j = 0; + break; + } + v4l2_info(sd, "\tNext carrier edge window: 16 clocks " + "-%1d/+%1d, %u to %u Hz\n", i, j, + clock_divider_to_freq(rxclk, 16 + j), + clock_divider_to_freq(rxclk, 16 - i)); + } + v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, rxclk), + pulse_width_count_to_ns(FIFO_RXTX, rxclk)); + v4l2_info(sd, "\tLow pass filter: %s\n", + filtr ? "enabled" : "disabled"); + if (filtr) + v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, " + "%u ns\n", + lpf_count_to_us(filtr), + lpf_count_to_ns(filtr)); + v4l2_info(sd, "\tPulse width timer timed-out: %s\n", + stats & STATS_RTO ? "yes" : "no"); + v4l2_info(sd, "\tPulse width timer time-out intr: %s\n", + irqen & IRQEN_RTE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO overrun: %s\n", + stats & STATS_ROR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO overrun interrupt: %s\n", + irqen & IRQEN_ROE ? "enabled" : "disabled"); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_RBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_RSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_RSE ? "enabled" : "disabled"); + + v4l2_info(sd, "IR Transmitter:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_TXE ? "yes" : "no"); + v4l2_info(sd, "\tModulation onto a carrier: %s\n", + cntrl & CNTRL_MOD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_TFE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_TIC ? "not empty" : "half full or less"); + v4l2_info(sd, "\tCarrier polarity: %s\n", + cntrl & CNTRL_CPL ? "space:burst mark:noburst" + : "space:noburst mark:burst"); + if (cntrl & CNTRL_MOD) { + v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(txclk)); + v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n", + cduty + 1); + } + v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, txclk), + pulse_width_count_to_ns(FIFO_RXTX, txclk)); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_TBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_TSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_TSE ? "enabled" : "disabled"); + + return 0; +} + + +const struct v4l2_subdev_ir_ops cx25840_ir_ops = { + .rx_read = cx25840_ir_rx_read, + .rx_g_parameters = cx25840_ir_rx_g_parameters, + .rx_s_parameters = cx25840_ir_rx_s_parameters, + + .tx_write = cx25840_ir_tx_write, + .tx_g_parameters = cx25840_ir_tx_g_parameters, + .tx_s_parameters = cx25840_ir_tx_s_parameters, +}; + + +static const struct v4l2_subdev_ir_parameters default_rx_params = { + .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5, and RC-6 carrier */ + + /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */ + /* RC-6: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */ + .noise_filter_min_width = 333333, /* ns */ + .carrier_range_lower = 35000, + .carrier_range_upper = 37000, + .invert_level = false, +}; + +static const struct v4l2_subdev_ir_parameters default_tx_params = { + .bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */ + .duty_cycle = 25, /* 25 % - RC-5 carrier */ + .invert_level = false, + .invert_carrier_sense = false, +}; + +int cx25840_ir_probe(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct cx25840_ir_state *ir_state; + struct v4l2_subdev_ir_parameters default_params; + + /* Only init the IR controller for the CX2388[57] AV Core for now */ + if (!(is_cx23885(state) || is_cx23887(state))) + return 0; + + ir_state = kzalloc(sizeof(struct cx25840_ir_state), GFP_KERNEL); + if (ir_state == NULL) + return -ENOMEM; + + spin_lock_init(&ir_state->rx_kfifo_lock); + if (kfifo_alloc(&ir_state->rx_kfifo, + CX25840_IR_RX_KFIFO_SIZE, GFP_KERNEL)) { + kfree(ir_state); + return -ENOMEM; + } + + ir_state->c = state->c; + state->ir_state = ir_state; + + /* Ensure no interrupts arrive yet */ + if (is_cx23885(state) || is_cx23887(state)) + cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, IRQEN_MSK); + else + cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, 0); + + mutex_init(&ir_state->rx_params_lock); + memcpy(&default_params, &default_rx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params); + + mutex_init(&ir_state->tx_params_lock); + memcpy(&default_params, &default_tx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params); + + return 0; +} + +int cx25840_ir_remove(struct v4l2_subdev *sd) +{ + struct cx25840_state *state = to_state(sd); + struct cx25840_ir_state *ir_state = to_ir_state(sd); + + if (ir_state == NULL) + return -ENODEV; + + cx25840_ir_rx_shutdown(sd); + cx25840_ir_tx_shutdown(sd); + + kfifo_free(&ir_state->rx_kfifo); + kfree(ir_state); + state->ir_state = NULL; + return 0; +} diff --git a/drivers/media/i2c/cx25840/cx25840-vbi.c b/drivers/media/i2c/cx25840/cx25840-vbi.c new file mode 100644 index 000000000000..64a4004f8a97 --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-vbi.c @@ -0,0 +1,256 @@ +/* cx25840 VBI functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <media/v4l2-common.h> +#include <media/cx25840.h> + +#include "cx25840-core.h" + +static int odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int decode_vps(u8 * dst, u8 * p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + + u8 c, err = 0; + int i; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | + ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + + return err & 0xf0; +} + +int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + static const u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_WSS_625, 0, /* 4 */ + V4L2_SLICED_CAPTION_525, /* 6 */ + 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ + 0, 0, 0, 0 + }; + int is_pal = !(state->std & V4L2_STD_525_60); + int i; + + memset(svbi, 0, sizeof(*svbi)); + /* we're done if raw VBI is active */ + if ((cx25840_read(client, 0x404) & 0x10) == 0) + return 0; + + if (is_pal) { + for (i = 7; i <= 23; i++) { + u8 v = cx25840_read(client, 0x424 + i - 7); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } else { + for (i = 10; i <= 21; i++) { + u8 v = cx25840_read(client, 0x424 + i - 10); + + svbi->service_lines[0][i] = lcr2vbi[v >> 4]; + svbi->service_lines[1][i] = lcr2vbi[v & 0xf]; + svbi->service_set |= svbi->service_lines[0][i] | + svbi->service_lines[1][i]; + } + } + return 0; +} + +int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int is_pal = !(state->std & V4L2_STD_525_60); + int vbi_offset = is_pal ? 1 : 0; + + /* Setup standard */ + cx25840_std_setup(client); + + /* VBI Offset */ + cx25840_write(client, 0x47f, vbi_offset); + cx25840_write(client, 0x404, 0x2e); + return 0; +} + +int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int is_pal = !(state->std & V4L2_STD_525_60); + int vbi_offset = is_pal ? 1 : 0; + int i, x; + u8 lcr[24]; + + for (x = 0; x <= 23; x++) + lcr[x] = 0x00; + + /* Setup standard */ + cx25840_std_setup(client); + + /* Sliced VBI */ + cx25840_write(client, 0x404, 0x32); /* Ancillary data */ + cx25840_write(client, 0x406, 0x13); + cx25840_write(client, 0x47f, vbi_offset); + + if (is_pal) { + for (i = 0; i <= 6; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } else { + for (i = 0; i <= 9; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + + for (i = 22; i <= 23; i++) + svbi->service_lines[0][i] = + svbi->service_lines[1][i] = 0; + } + + for (i = 7; i <= 23; i++) { + for (x = 0; x <= 1; x++) { + switch (svbi->service_lines[1-x][i]) { + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 6 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 9 << (4 * x); + break; + } + } + } + + if (is_pal) { + for (x = 1, i = 0x424; i <= 0x434; i++, x++) + cx25840_write(client, i, lcr[6 + x]); + } else { + for (x = 1, i = 0x424; i <= 0x430; i++, x++) + cx25840_write(client, i, lcr[9 + x]); + for (i = 0x431; i <= 0x434; i++) + cx25840_write(client, i, 0); + } + + cx25840_write(client, 0x43c, 0x16); + cx25840_write(client, 0x474, is_pal ? 0x2a : 0x22); + return 0; +} + +int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) +{ + struct cx25840_state *state = to_state(sd); + u8 *p = vbi->p; + int id1, id2, l, err = 0; + + if (p[0] || p[1] != 0xff || p[2] != 0xff || + (p[3] != 0x55 && p[3] != 0x91)) { + vbi->line = vbi->type = 0; + return 0; + } + + p += 4; + id1 = p[-1]; + id2 = p[0] & 0xf; + l = p[2] & 0x3f; + l += state->vbi_line_offset; + p += 4; + + switch (id2) { + case 1: + id2 = V4L2_SLICED_TELETEXT_B; + break; + case 4: + id2 = V4L2_SLICED_WSS_625; + break; + case 6: + id2 = V4L2_SLICED_CAPTION_525; + err = !odd_parity(p[0]) || !odd_parity(p[1]); + break; + case 9: + id2 = V4L2_SLICED_VPS; + if (decode_vps(p, p) != 0) + err = 1; + break; + default: + id2 = 0; + err = 1; + break; + } + + vbi->type = err ? 0 : id2; + vbi->line = err ? 0 : l; + vbi->is_second_field = err ? 0 : (id1 == 0x55); + vbi->p = p; + return 0; +} diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c new file mode 100644 index 000000000000..04f192a0398a --- /dev/null +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -0,0 +1,489 @@ +/* + * + * keyboard input driver for i2c IR remote controls + * + * Copyright (c) 2000-2003 Gerd Knorr <kraxel@bytesex.org> + * modified for PixelView (BT878P+W/FM) by + * Michal Kochanowicz <mkochano@pld.org.pl> + * Christoph Bartelmus <lirc@bartelmus.de> + * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by + * Ulrich Mueller <ulrich.mueller42@web.de> + * modified for em2820 based USB TV tuners by + * Markus Rechberger <mrechberger@gmail.com> + * modified for DViCO Fusion HDTV 5 RT GOLD by + * Chaogui Zhang <czhang1974@gmail.com> + * modified for MSI TV@nywhere Plus by + * Henry Wong <henry@stuffedcow.net> + * Mark Schultz <n9xmj@yahoo.com> + * Brian Rogers <brian_rogers@comcast.net> + * modified for AVerMedia Cardbus by + * Oldrich Jedlicka <oldium.pro@seznam.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> + +#include <media/rc-core.h> +#include <media/ir-kbd-i2c.h> + +/* ----------------------------------------------------------------------- */ +/* insmod parameters */ + +static int debug; +module_param(debug, int, 0644); /* debug level (0,1,2) */ + + +#define MODULE_NAME "ir-kbd-i2c" +#define dprintk(level, fmt, arg...) if (debug >= level) \ + printk(KERN_DEBUG MODULE_NAME ": " fmt , ## arg) + +/* ----------------------------------------------------------------------- */ + +static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, + int size, int offset) +{ + unsigned char buf[6]; + int start, range, toggle, dev, code, ircode; + + /* poll IR chip */ + if (size != i2c_master_recv(ir->c, buf, size)) + return -EIO; + + /* split rc5 data block ... */ + start = (buf[offset] >> 7) & 1; + range = (buf[offset] >> 6) & 1; + toggle = (buf[offset] >> 5) & 1; + dev = buf[offset] & 0x1f; + code = (buf[offset+1] >> 2) & 0x3f; + + /* rc5 has two start bits + * the first bit must be one + * the second bit defines the command range (1 = 0-63, 0 = 64 - 127) + */ + if (!start) + /* no key pressed */ + return 0; + /* + * Hauppauge remotes (black/silver) always use + * specific device ids. If we do not filter the + * device ids then messages destined for devices + * such as TVs (id=0) will get through causing + * mis-fired events. + * + * We also filter out invalid key presses which + * produce annoying debug log entries. + */ + ircode= (start << 12) | (toggle << 11) | (dev << 6) | code; + if ((ircode & 0x1fff)==0x1fff) + /* invalid key press */ + return 0; + + if (!range) + code += 64; + + dprintk(1,"ir hauppauge (rc5): s%d r%d t%d dev=%d code=%d\n", + start, range, toggle, dev, code); + + /* return key */ + *ir_key = (dev << 8) | code; + *ir_raw = ircode; + return 1; +} + +static int get_key_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + return get_key_haup_common (ir, ir_key, ir_raw, 3, 0); +} + +static int get_key_haup_xvr(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + int ret; + unsigned char buf[1] = { 0 }; + + /* + * This is the same apparent "are you ready?" poll command observed + * watching Windows driver traffic and implemented in lirc_zilog. With + * this added, we get far saner remote behavior with z8 chips on usb + * connected devices, even with the default polling interval of 100ms. + */ + ret = i2c_master_send(ir->c, buf, 1); + if (ret != 1) + return (ret < 0) ? ret : -EINVAL; + + return get_key_haup_common (ir, ir_key, ir_raw, 6, 3); +} + +static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + dprintk(1,"read error\n"); + return -EIO; + } + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char buf[4]; + + /* poll IR chip */ + if (4 != i2c_master_recv(ir->c, buf, 4)) { + dprintk(1,"read error\n"); + return -EIO; + } + + if(buf[0] !=0 || buf[1] !=0 || buf[2] !=0 || buf[3] != 0) + dprintk(2, "%s: 0x%2x 0x%2x 0x%2x 0x%2x\n", __func__, + buf[0], buf[1], buf[2], buf[3]); + + /* no key pressed or signal from other ir remote */ + if(buf[0] != 0x1 || buf[1] != 0xfe) + return 0; + + *ir_key = buf[2]; + *ir_raw = (buf[2] << 8) | buf[3]; + + return 1; +} + +static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(ir->c, &b, 1)) { + dprintk(1,"read error\n"); + return -EIO; + } + + /* it seems that 0xFE indicates that a button is still hold + down, while 0xff indicates that no button is hold + down. 0xfe sequences are sometimes interrupted by 0xFF */ + + dprintk(2,"key %02x\n", b); + + if (b == 0xff) + return 0; + + if (b == 0xfe) + /* keep old data */ + return 1; + + *ir_key = b; + *ir_raw = b; + return 1; +} + +static int get_key_avermedia_cardbus(struct IR_i2c *ir, + u32 *ir_key, u32 *ir_raw) +{ + unsigned char subaddr, key, keygroup; + struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, + .buf = &subaddr, .len = 1}, + { .addr = ir->c->addr, .flags = I2C_M_RD, + .buf = &key, .len = 1} }; + subaddr = 0x0d; + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { + dprintk(1, "read error\n"); + return -EIO; + } + + if (key == 0xff) + return 0; + + subaddr = 0x0b; + msg[1].buf = &keygroup; + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { + dprintk(1, "read error\n"); + return -EIO; + } + + if (keygroup == 0xff) + return 0; + + dprintk(1, "read key 0x%02x/0x%02x\n", key, keygroup); + if (keygroup < 2 || keygroup > 3) { + /* Only a warning */ + dprintk(1, "warning: invalid key group 0x%02x for key 0x%02x\n", + keygroup, key); + } + key |= (keygroup & 1) << 6; + + *ir_key = key; + *ir_raw = key; + return 1; +} + +/* ----------------------------------------------------------------------- */ + +static int ir_key_poll(struct IR_i2c *ir) +{ + static u32 ir_key, ir_raw; + int rc; + + dprintk(3, "%s\n", __func__); + rc = ir->get_key(ir, &ir_key, &ir_raw); + if (rc < 0) { + dprintk(2,"error\n"); + return rc; + } + + if (rc) { + dprintk(1, "%s: keycode = 0x%04x\n", __func__, ir_key); + rc_keydown(ir->rc, ir_key, 0); + } + return 0; +} + +static void ir_work(struct work_struct *work) +{ + int rc; + struct IR_i2c *ir = container_of(work, struct IR_i2c, work.work); + + rc = ir_key_poll(ir); + if (rc == -ENODEV) { + rc_unregister_device(ir->rc); + ir->rc = NULL; + return; + } + + schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling_interval)); +} + +/* ----------------------------------------------------------------------- */ + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + char *ir_codes = NULL; + const char *name = NULL; + u64 rc_type = RC_TYPE_UNKNOWN; + struct IR_i2c *ir; + struct rc_dev *rc = NULL; + struct i2c_adapter *adap = client->adapter; + unsigned short addr = client->addr; + int err; + + ir = kzalloc(sizeof(struct IR_i2c), GFP_KERNEL); + if (!ir) + return -ENOMEM; + + ir->c = client; + ir->polling_interval = DEFAULT_POLLING_INTERVAL; + i2c_set_clientdata(client, ir); + + switch(addr) { + case 0x64: + name = "Pixelview"; + ir->get_key = get_key_pixelview; + rc_type = RC_TYPE_OTHER; + ir_codes = RC_MAP_EMPTY; + break; + case 0x18: + case 0x1f: + case 0x1a: + name = "Hauppauge"; + ir->get_key = get_key_haup; + rc_type = RC_TYPE_RC5; + ir_codes = RC_MAP_HAUPPAUGE; + break; + case 0x30: + name = "KNC One"; + ir->get_key = get_key_knc1; + rc_type = RC_TYPE_OTHER; + ir_codes = RC_MAP_EMPTY; + break; + case 0x6b: + name = "FusionHDTV"; + ir->get_key = get_key_fusionhdtv; + rc_type = RC_TYPE_RC5; + ir_codes = RC_MAP_FUSIONHDTV_MCE; + break; + case 0x40: + name = "AVerMedia Cardbus remote"; + ir->get_key = get_key_avermedia_cardbus; + rc_type = RC_TYPE_OTHER; + ir_codes = RC_MAP_AVERMEDIA_CARDBUS; + break; + case 0x71: + name = "Hauppauge/Zilog Z8"; + ir->get_key = get_key_haup_xvr; + rc_type = RC_TYPE_RC5; + ir_codes = RC_MAP_HAUPPAUGE; + break; + } + + /* Let the caller override settings */ + if (client->dev.platform_data) { + const struct IR_i2c_init_data *init_data = + client->dev.platform_data; + + ir_codes = init_data->ir_codes; + rc = init_data->rc_dev; + + name = init_data->name; + if (init_data->type) + rc_type = init_data->type; + + if (init_data->polling_interval) + ir->polling_interval = init_data->polling_interval; + + switch (init_data->internal_get_key_func) { + case IR_KBD_GET_KEY_CUSTOM: + /* The bridge driver provided us its own function */ + ir->get_key = init_data->get_key; + break; + case IR_KBD_GET_KEY_PIXELVIEW: + ir->get_key = get_key_pixelview; + break; + case IR_KBD_GET_KEY_HAUP: + ir->get_key = get_key_haup; + break; + case IR_KBD_GET_KEY_KNC1: + ir->get_key = get_key_knc1; + break; + case IR_KBD_GET_KEY_FUSIONHDTV: + ir->get_key = get_key_fusionhdtv; + break; + case IR_KBD_GET_KEY_HAUP_XVR: + ir->get_key = get_key_haup_xvr; + break; + case IR_KBD_GET_KEY_AVERMEDIA_CARDBUS: + ir->get_key = get_key_avermedia_cardbus; + break; + } + } + + if (!rc) { + /* + * If platform_data doesn't specify rc_dev, initilize it + * internally + */ + rc = rc_allocate_device(); + if (!rc) { + err = -ENOMEM; + goto err_out_free; + } + } + ir->rc = rc; + + /* Make sure we are all setup before going on */ + if (!name || !ir->get_key || !rc_type || !ir_codes) { + dprintk(1, ": Unsupported device at address 0x%02x\n", + addr); + err = -ENODEV; + goto err_out_free; + } + + /* Sets name */ + snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); + ir->ir_codes = ir_codes; + + snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0", + dev_name(&adap->dev), + dev_name(&client->dev)); + + /* + * Initialize input_dev fields + * It doesn't make sense to allow overriding them via platform_data + */ + rc->input_id.bustype = BUS_I2C; + rc->input_phys = ir->phys; + rc->input_name = ir->name; + + /* + * Initialize the other fields of rc_dev + */ + rc->map_name = ir->ir_codes; + rc->allowed_protos = rc_type; + if (!rc->driver_name) + rc->driver_name = MODULE_NAME; + + err = rc_register_device(rc); + if (err) + goto err_out_free; + + printk(MODULE_NAME ": %s detected at %s [%s]\n", + ir->name, ir->phys, adap->name); + + /* start polling via eventd */ + INIT_DELAYED_WORK(&ir->work, ir_work); + schedule_delayed_work(&ir->work, 0); + + return 0; + + err_out_free: + /* Only frees rc if it were allocated internally */ + rc_free_device(rc); + kfree(ir); + return err; +} + +static int ir_remove(struct i2c_client *client) +{ + struct IR_i2c *ir = i2c_get_clientdata(client); + + /* kill outstanding polls */ + cancel_delayed_work_sync(&ir->work); + + /* unregister device */ + if (ir->rc) + rc_unregister_device(ir->rc); + + /* free memory */ + kfree(ir); + return 0; +} + +static const struct i2c_device_id ir_kbd_id[] = { + /* Generic entry for any IR receiver */ + { "ir_video", 0 }, + /* IR device specific entries should be added here */ + { "ir_rx_z8f0811_haup", 0 }, + { "ir_rx_z8f0811_hdpvr", 0 }, + { } +}; + +static struct i2c_driver ir_kbd_driver = { + .driver = { + .name = "ir-kbd-i2c", + }, + .probe = ir_probe, + .remove = ir_remove, + .id_table = ir_kbd_id, +}; + +module_i2c_driver(ir_kbd_driver); + +/* ----------------------------------------------------------------------- */ + +MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller"); +MODULE_DESCRIPTION("input driver for i2c IR remote controls"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/ks0127.c b/drivers/media/i2c/ks0127.c new file mode 100644 index 000000000000..ee7ca2dcca2f --- /dev/null +++ b/drivers/media/i2c/ks0127.c @@ -0,0 +1,724 @@ +/* + * Video Capture Driver (Video for Linux 1/2) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ***************************************************************************** + * + * Modified and extended by + * Mike Bernson <mike@mlb.org> + * Gerard v.d. Horst + * Leon van Stuivenberg <l.vanstuivenberg@chello.nl> + * Gernot Ziegler <gz@lysator.liu.se> + * + * Version History: + * V1.0 Ryan Drake Initial version by Ryan Drake + * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include "ks0127.h" + +MODULE_DESCRIPTION("KS0127 video decoder driver"); +MODULE_AUTHOR("Ryan Drake"); +MODULE_LICENSE("GPL"); + +/* Addresses */ +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA + + +/* ks0127 control registers */ +#define KS_STAT 0x00 +#define KS_CMDA 0x01 +#define KS_CMDB 0x02 +#define KS_CMDC 0x03 +#define KS_CMDD 0x04 +#define KS_HAVB 0x05 +#define KS_HAVE 0x06 +#define KS_HS1B 0x07 +#define KS_HS1E 0x08 +#define KS_HS2B 0x09 +#define KS_HS2E 0x0a +#define KS_AGC 0x0b +#define KS_HXTRA 0x0c +#define KS_CDEM 0x0d +#define KS_PORTAB 0x0e +#define KS_LUMA 0x0f +#define KS_CON 0x10 +#define KS_BRT 0x11 +#define KS_CHROMA 0x12 +#define KS_CHROMB 0x13 +#define KS_DEMOD 0x14 +#define KS_SAT 0x15 +#define KS_HUE 0x16 +#define KS_VERTIA 0x17 +#define KS_VERTIB 0x18 +#define KS_VERTIC 0x19 +#define KS_HSCLL 0x1a +#define KS_HSCLH 0x1b +#define KS_VSCLL 0x1c +#define KS_VSCLH 0x1d +#define KS_OFMTA 0x1e +#define KS_OFMTB 0x1f +#define KS_VBICTL 0x20 +#define KS_CCDAT2 0x21 +#define KS_CCDAT1 0x22 +#define KS_VBIL30 0x23 +#define KS_VBIL74 0x24 +#define KS_VBIL118 0x25 +#define KS_VBIL1512 0x26 +#define KS_TTFRAM 0x27 +#define KS_TESTA 0x28 +#define KS_UVOFFH 0x29 +#define KS_UVOFFL 0x2a +#define KS_UGAIN 0x2b +#define KS_VGAIN 0x2c +#define KS_VAVB 0x2d +#define KS_VAVE 0x2e +#define KS_CTRACK 0x2f +#define KS_POLCTL 0x30 +#define KS_REFCOD 0x31 +#define KS_INVALY 0x32 +#define KS_INVALU 0x33 +#define KS_INVALV 0x34 +#define KS_UNUSEY 0x35 +#define KS_UNUSEU 0x36 +#define KS_UNUSEV 0x37 +#define KS_USRSAV 0x38 +#define KS_USREAV 0x39 +#define KS_SHS1A 0x3a +#define KS_SHS1B 0x3b +#define KS_SHS1C 0x3c +#define KS_CMDE 0x3d +#define KS_VSDEL 0x3e +#define KS_CMDF 0x3f +#define KS_GAMMA0 0x40 +#define KS_GAMMA1 0x41 +#define KS_GAMMA2 0x42 +#define KS_GAMMA3 0x43 +#define KS_GAMMA4 0x44 +#define KS_GAMMA5 0x45 +#define KS_GAMMA6 0x46 +#define KS_GAMMA7 0x47 +#define KS_GAMMA8 0x48 +#define KS_GAMMA9 0x49 +#define KS_GAMMA10 0x4a +#define KS_GAMMA11 0x4b +#define KS_GAMMA12 0x4c +#define KS_GAMMA13 0x4d +#define KS_GAMMA14 0x4e +#define KS_GAMMA15 0x4f +#define KS_GAMMA16 0x50 +#define KS_GAMMA17 0x51 +#define KS_GAMMA18 0x52 +#define KS_GAMMA19 0x53 +#define KS_GAMMA20 0x54 +#define KS_GAMMA21 0x55 +#define KS_GAMMA22 0x56 +#define KS_GAMMA23 0x57 +#define KS_GAMMA24 0x58 +#define KS_GAMMA25 0x59 +#define KS_GAMMA26 0x5a +#define KS_GAMMA27 0x5b +#define KS_GAMMA28 0x5c +#define KS_GAMMA29 0x5d +#define KS_GAMMA30 0x5e +#define KS_GAMMA31 0x5f +#define KS_GAMMAD0 0x60 +#define KS_GAMMAD1 0x61 +#define KS_GAMMAD2 0x62 +#define KS_GAMMAD3 0x63 +#define KS_GAMMAD4 0x64 +#define KS_GAMMAD5 0x65 +#define KS_GAMMAD6 0x66 +#define KS_GAMMAD7 0x67 +#define KS_GAMMAD8 0x68 +#define KS_GAMMAD9 0x69 +#define KS_GAMMAD10 0x6a +#define KS_GAMMAD11 0x6b +#define KS_GAMMAD12 0x6c +#define KS_GAMMAD13 0x6d +#define KS_GAMMAD14 0x6e +#define KS_GAMMAD15 0x6f +#define KS_GAMMAD16 0x70 +#define KS_GAMMAD17 0x71 +#define KS_GAMMAD18 0x72 +#define KS_GAMMAD19 0x73 +#define KS_GAMMAD20 0x74 +#define KS_GAMMAD21 0x75 +#define KS_GAMMAD22 0x76 +#define KS_GAMMAD23 0x77 +#define KS_GAMMAD24 0x78 +#define KS_GAMMAD25 0x79 +#define KS_GAMMAD26 0x7a +#define KS_GAMMAD27 0x7b +#define KS_GAMMAD28 0x7c +#define KS_GAMMAD29 0x7d +#define KS_GAMMAD30 0x7e +#define KS_GAMMAD31 0x7f + + +/**************************************************************************** +* mga_dev : represents one ks0127 chip. +****************************************************************************/ + +struct adjust { + int contrast; + int bright; + int hue; + int ugain; + int vgain; +}; + +struct ks0127 { + struct v4l2_subdev sd; + v4l2_std_id norm; + int ident; + u8 regs[256]; +}; + +static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ks0127, sd); +} + + +static int debug; /* insmod parameter */ + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug output"); + +static u8 reg_defaults[64]; + +static void init_reg_defaults(void) +{ + static int initialized; + u8 *table = reg_defaults; + + if (initialized) + return; + initialized = 1; + + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ + table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ + table[KS_CMDC] = 0x00; /* Test options */ + /* clock & input select, write 1 to PORTA */ + table[KS_CMDD] = 0x01; + table[KS_HAVB] = 0x00; /* HAV Start Control */ + table[KS_HAVE] = 0x00; /* HAV End Control */ + table[KS_HS1B] = 0x10; /* HS1 Start Control */ + table[KS_HS1E] = 0x00; /* HS1 End Control */ + table[KS_HS2B] = 0x00; /* HS2 Start Control */ + table[KS_HS2E] = 0x00; /* HS2 End Control */ + table[KS_AGC] = 0x53; /* Manual setting for AGC */ + table[KS_HXTRA] = 0x00; /* Extra Bits for HAV and HS1/2 */ + table[KS_CDEM] = 0x00; /* Chroma Demodulation Control */ + table[KS_PORTAB] = 0x0f; /* port B is input, port A output GPPORT */ + table[KS_LUMA] = 0x01; /* Luma control */ + table[KS_CON] = 0x00; /* Contrast Control */ + table[KS_BRT] = 0x00; /* Brightness Control */ + table[KS_CHROMA] = 0x2a; /* Chroma control A */ + table[KS_CHROMB] = 0x90; /* Chroma control B */ + table[KS_DEMOD] = 0x00; /* Chroma Demodulation Control & Status */ + table[KS_SAT] = 0x00; /* Color Saturation Control*/ + table[KS_HUE] = 0x00; /* Hue Control */ + table[KS_VERTIA] = 0x00; /* Vertical Processing Control A */ + /* Vertical Processing Control B, luma 1 line delayed */ + table[KS_VERTIB] = 0x12; + table[KS_VERTIC] = 0x0b; /* Vertical Processing Control C */ + table[KS_HSCLL] = 0x00; /* Horizontal Scaling Ratio Low */ + table[KS_HSCLH] = 0x00; /* Horizontal Scaling Ratio High */ + table[KS_VSCLL] = 0x00; /* Vertical Scaling Ratio Low */ + table[KS_VSCLH] = 0x00; /* Vertical Scaling Ratio High */ + /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */ + table[KS_OFMTA] = 0x30; + table[KS_OFMTB] = 0x00; /* Output Control B */ + /* VBI Decoder Control; 4bit fmt: avoid Y overflow */ + table[KS_VBICTL] = 0x5d; + table[KS_CCDAT2] = 0x00; /* Read Only register */ + table[KS_CCDAT1] = 0x00; /* Read Only register */ + table[KS_VBIL30] = 0xa8; /* VBI data decoding options */ + table[KS_VBIL74] = 0xaa; /* VBI data decoding options */ + table[KS_VBIL118] = 0x2a; /* VBI data decoding options */ + table[KS_VBIL1512] = 0x00; /* VBI data decoding options */ + table[KS_TTFRAM] = 0x00; /* Teletext frame alignment pattern */ + table[KS_TESTA] = 0x00; /* test register, shouldn't be written */ + table[KS_UVOFFH] = 0x00; /* UV Offset Adjustment High */ + table[KS_UVOFFL] = 0x00; /* UV Offset Adjustment Low */ + table[KS_UGAIN] = 0x00; /* U Component Gain Adjustment */ + table[KS_VGAIN] = 0x00; /* V Component Gain Adjustment */ + table[KS_VAVB] = 0x07; /* VAV Begin */ + table[KS_VAVE] = 0x00; /* VAV End */ + table[KS_CTRACK] = 0x00; /* Chroma Tracking Control */ + table[KS_POLCTL] = 0x41; /* Timing Signal Polarity Control */ + table[KS_REFCOD] = 0x80; /* Reference Code Insertion Control */ + table[KS_INVALY] = 0x10; /* Invalid Y Code */ + table[KS_INVALU] = 0x80; /* Invalid U Code */ + table[KS_INVALV] = 0x80; /* Invalid V Code */ + table[KS_UNUSEY] = 0x10; /* Unused Y Code */ + table[KS_UNUSEU] = 0x80; /* Unused U Code */ + table[KS_UNUSEV] = 0x80; /* Unused V Code */ + table[KS_USRSAV] = 0x00; /* reserved */ + table[KS_USREAV] = 0x00; /* reserved */ + table[KS_SHS1A] = 0x00; /* User Defined SHS1 A */ + /* User Defined SHS1 B, ALT656=1 on 0127B */ + table[KS_SHS1B] = 0x80; + table[KS_SHS1C] = 0x00; /* User Defined SHS1 C */ + table[KS_CMDE] = 0x00; /* Command Register E */ + table[KS_VSDEL] = 0x00; /* VS Delay Control */ + /* Command Register F, update -immediately- */ + /* (there might come no vsync)*/ + table[KS_CMDF] = 0x02; +} + + +/* We need to manually read because of a bug in the KS0127 chip. + * + * An explanation from kayork@mail.utexas.edu: + * + * During I2C reads, the KS0127 only samples for a stop condition + * during the place where the acknowledge bit should be. Any standard + * I2C implementation (correctly) throws in another clock transition + * at the 9th bit, and the KS0127 will not recognize the stop condition + * and will continue to clock out data. + * + * So we have to do the read ourself. Big deal. + * workaround in i2c-algo-bit + */ + + +static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + char val = 0; + struct i2c_msg msgs[] = { + { client->addr, 0, sizeof(reg), ® }, + { client->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val } + }; + int ret; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + v4l2_dbg(1, debug, sd, "read error\n"); + + return val; +} + + +static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ks0127 *ks = to_ks0127(sd); + char msg[] = { reg, val }; + + if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg)) + v4l2_dbg(1, debug, sd, "write error\n"); + + ks->regs[reg] = val; +} + + +/* generic bit-twiddling */ +static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v) +{ + struct ks0127 *ks = to_ks0127(sd); + + u8 val = ks->regs[reg]; + val = (val & and_v) | or_v; + ks0127_write(sd, reg, val); +} + + + +/**************************************************************************** +* ks0127 private api +****************************************************************************/ +static void ks0127_init(struct v4l2_subdev *sd) +{ + struct ks0127 *ks = to_ks0127(sd); + u8 *table = reg_defaults; + int i; + + ks->ident = V4L2_IDENT_KS0127; + + v4l2_dbg(1, debug, sd, "reset\n"); + msleep(1); + + /* initialize all registers to known values */ + /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ + + for (i = 1; i < 33; i++) + ks0127_write(sd, i, table[i]); + + for (i = 35; i < 40; i++) + ks0127_write(sd, i, table[i]); + + for (i = 41; i < 56; i++) + ks0127_write(sd, i, table[i]); + + for (i = 58; i < 64; i++) + ks0127_write(sd, i, table[i]); + + + if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) { + ks->ident = V4L2_IDENT_KS0122S; + v4l2_dbg(1, debug, sd, "ks0122s found\n"); + return; + } + + switch (ks0127_read(sd, KS_CMDE) & 0x0f) { + case 0: + v4l2_dbg(1, debug, sd, "ks0127 found\n"); + break; + + case 9: + ks->ident = V4L2_IDENT_KS0127B; + v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n"); + break; + + default: + v4l2_dbg(1, debug, sd, "unknown revision\n"); + break; + } +} + +static int ks0127_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct ks0127 *ks = to_ks0127(sd); + + switch (input) { + case KS_INPUT_COMPOSITE_1: + case KS_INPUT_COMPOSITE_2: + case KS_INPUT_COMPOSITE_3: + case KS_INPUT_COMPOSITE_4: + case KS_INPUT_COMPOSITE_5: + case KS_INPUT_COMPOSITE_6: + v4l2_dbg(1, debug, sd, + "s_routing %d: Composite\n", input); + /* autodetect 50/60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(sd, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(sd, KS_CMDB, 0xb0, input); + /* non-freerunning mode */ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00); + /* chroma trap, HYBWR=1 */ + ks0127_and_or(sd, KS_LUMA, 0x00, + (reg_defaults[KS_LUMA])|0x0c); + /* scaler fullbw, luma comb off */ + ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81); + /* manual chroma comb .25 .5 .25 */ + ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90); + + /* chroma path delay */ + ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90); + + ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_SVIDEO_1: + case KS_INPUT_SVIDEO_2: + case KS_INPUT_SVIDEO_3: + v4l2_dbg(1, debug, sd, + "s_routing %d: S-Video\n", input); + /* autodetect 50/60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x00); + /* VSE=0 */ + ks0127_and_or(sd, KS_CMDA, ~0x40, 0x00); + /* set input line */ + ks0127_and_or(sd, KS_CMDB, 0xb0, input); + /* non-freerunning mode */ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x0a); + /* analog input */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x00); + /* enable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(sd, KS_LUMA, 0x00, + reg_defaults[KS_LUMA]); + /* disable luma comb */ + ks0127_and_or(sd, KS_VERTIA, 0x08, + (reg_defaults[KS_VERTIA]&0xf0)|0x01); + ks0127_and_or(sd, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + ks0127_and_or(sd, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + break; + + case KS_INPUT_YUV656: + v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n"); + if (ks->norm & V4L2_STD_525_60) + /* force 60 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x03); + else + /* force 50 Hz */ + ks0127_and_or(sd, KS_CMDA, 0xfc, 0x02); + + ks0127_and_or(sd, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + /* set input line and VALIGN */ + ks0127_and_or(sd, KS_CMDB, 0xb0, (input | 0x40)); + /* freerunning mode, */ + /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ + ks0127_and_or(sd, KS_CMDC, 0x70, 0x87); + /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ + ks0127_and_or(sd, KS_CMDD, 0x03, 0x08); + /* disable chroma demodulation */ + ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30); + /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ + ks0127_and_or(sd, KS_LUMA, 0x00, 0x71); + ks0127_and_or(sd, KS_VERTIC, 0x0f, + reg_defaults[KS_VERTIC]&0xf0); + + /* scaler fullbw, luma comb off */ + ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81); + + ks0127_and_or(sd, KS_CHROMB, 0x0f, + reg_defaults[KS_CHROMB]&0xf0); + + ks0127_and_or(sd, KS_CON, 0x00, 0x00); + ks0127_and_or(sd, KS_BRT, 0x00, 32); /* spec: 34 */ + /* spec: 229 (e5) */ + ks0127_and_or(sd, KS_SAT, 0x00, 0xe8); + ks0127_and_or(sd, KS_HUE, 0x00, 0); + + ks0127_and_or(sd, KS_UGAIN, 0x00, 238); + ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00); + + /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ + ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00); + break; + + default: + v4l2_dbg(1, debug, sd, + "s_routing: Unknown input %d\n", input); + break; + } + + /* hack: CDMLPF sometimes spontaneously switches on; */ + /* force back off */ + ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]); + return 0; +} + +static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct ks0127 *ks = to_ks0127(sd); + + /* Set to automatic SECAM/Fsc mode */ + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00); + + ks->norm = std; + if (std & V4L2_STD_NTSC) { + v4l2_dbg(1, debug, sd, + "s_std: NTSC_M\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20); + } else if (std & V4L2_STD_PAL_N) { + v4l2_dbg(1, debug, sd, + "s_std: NTSC_N (fixme)\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40); + } else if (std & V4L2_STD_PAL) { + v4l2_dbg(1, debug, sd, + "s_std: PAL_N\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20); + } else if (std & V4L2_STD_PAL_M) { + v4l2_dbg(1, debug, sd, + "s_std: PAL_M (fixme)\n"); + ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40); + } else if (std & V4L2_STD_SECAM) { + v4l2_dbg(1, debug, sd, + "s_std: SECAM\n"); + + /* set to secam autodetection */ + ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00); + schedule_timeout_interruptible(HZ/10+1); + + /* did it autodetect? */ + if (!(ks0127_read(sd, KS_DEMOD) & 0x40)) + /* force to secam mode */ + ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f); + } else { + v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n", + (unsigned long long)std); + } + return 0; +} + +static int ks0127_s_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable); + if (enable) { + /* All output pins on */ + ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30); + /* Obey the OEN pin */ + ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00); + } else { + /* Video output pins off */ + ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00); + /* Ignore the OEN pin */ + ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80); + } + return 0; +} + +static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + int stat = V4L2_IN_ST_NO_SIGNAL; + u8 status; + v4l2_std_id std = V4L2_STD_ALL; + + status = ks0127_read(sd, KS_STAT); + if (!(status & 0x20)) /* NOVID not set */ + stat = 0; + if (!(status & 0x01)) /* CLOCK set */ + stat |= V4L2_IN_ST_NO_COLOR; + if ((status & 0x08)) /* PALDET set */ + std = V4L2_STD_PAL; + else + std = V4L2_STD_NTSC; + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = stat; + return 0; +} + +static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + v4l2_dbg(1, debug, sd, "querystd\n"); + return ks0127_status(sd, NULL, std); +} + +static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + v4l2_dbg(1, debug, sd, "g_input_status\n"); + return ks0127_status(sd, status, NULL); +} + +static int ks0127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ks0127 *ks = to_ks0127(sd); + + return v4l2_chip_ident_i2c_client(client, chip, ks->ident, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops ks0127_core_ops = { + .g_chip_ident = ks0127_g_chip_ident, + .s_std = ks0127_s_std, +}; + +static const struct v4l2_subdev_video_ops ks0127_video_ops = { + .s_routing = ks0127_s_routing, + .s_stream = ks0127_s_stream, + .querystd = ks0127_querystd, + .g_input_status = ks0127_g_input_status, +}; + +static const struct v4l2_subdev_ops ks0127_ops = { + .core = &ks0127_core_ops, + .video = &ks0127_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +static int ks0127_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct ks0127 *ks; + struct v4l2_subdev *sd; + + v4l_info(client, "%s chip found @ 0x%x (%s)\n", + client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board", + client->addr << 1, client->adapter->name); + + ks = kzalloc(sizeof(*ks), GFP_KERNEL); + if (ks == NULL) + return -ENOMEM; + sd = &ks->sd; + v4l2_i2c_subdev_init(sd, client, &ks0127_ops); + + /* power up */ + init_reg_defaults(); + ks0127_write(sd, KS_CMDA, 0x2c); + mdelay(10); + + /* reset the device */ + ks0127_init(sd); + return 0; +} + +static int ks0127_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */ + ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */ + kfree(to_ks0127(sd)); + return 0; +} + +static const struct i2c_device_id ks0127_id[] = { + { "ks0127", 0 }, + { "ks0127b", 0 }, + { "ks0122s", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ks0127_id); + +static struct i2c_driver ks0127_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ks0127", + }, + .probe = ks0127_probe, + .remove = ks0127_remove, + .id_table = ks0127_id, +}; + +module_i2c_driver(ks0127_driver); diff --git a/drivers/media/i2c/ks0127.h b/drivers/media/i2c/ks0127.h new file mode 100644 index 000000000000..cb8abd5403b3 --- /dev/null +++ b/drivers/media/i2c/ks0127.h @@ -0,0 +1,51 @@ +/* + * Video Capture Driver ( Video for Linux 1/2 ) + * for the Matrox Marvel G200,G400 and Rainbow Runner-G series + * + * This module is an interface to the KS0127 video decoder chip. + * + * Copyright (C) 1999 Ryan Drake <stiletto@mediaone.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef KS0127_H +#define KS0127_H + +/* input channels */ +#define KS_INPUT_COMPOSITE_1 0 +#define KS_INPUT_COMPOSITE_2 1 +#define KS_INPUT_COMPOSITE_3 2 +#define KS_INPUT_COMPOSITE_4 4 +#define KS_INPUT_COMPOSITE_5 5 +#define KS_INPUT_COMPOSITE_6 6 + +#define KS_INPUT_SVIDEO_1 8 +#define KS_INPUT_SVIDEO_2 9 +#define KS_INPUT_SVIDEO_3 10 + +#define KS_INPUT_YUV656 15 +#define KS_INPUT_COUNT 10 + +/* output channels */ +#define KS_OUTPUT_YUV656E 0 +#define KS_OUTPUT_EXV 1 + +/* video standards */ +#define KS_STD_NTSC_N 112 /* 50 Hz NTSC */ +#define KS_STD_PAL_M 113 /* 60 Hz PAL */ + +#endif /* KS0127_H */ + diff --git a/drivers/media/i2c/m52790.c b/drivers/media/i2c/m52790.c new file mode 100644 index 000000000000..0991576f4c82 --- /dev/null +++ b/drivers/media/i2c/m52790.c @@ -0,0 +1,216 @@ +/* + * m52790 i2c ivtv driver. + * Copyright (C) 2007 Hans Verkuil + * + * A/V source switching Mitsubishi M52790SP/FP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/m52790.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("i2c device driver for m52790 A/V switch"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + + +struct m52790_state { + struct v4l2_subdev sd; + u16 input; + u16 output; +}; + +static inline struct m52790_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct m52790_state, sd); +} + +/* ----------------------------------------------------------------------- */ + +static int m52790_write(struct v4l2_subdev *sd) +{ + struct m52790_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + u8 sw1 = (state->input | state->output) & 0xff; + u8 sw2 = (state->input | state->output) >> 8; + + return i2c_smbus_write_byte_data(client, sw1, sw2); +} + +/* Note: audio and video are linked and cannot be switched separately. + So audio and video routing commands are identical for this chip. + In theory the video amplifier and audio modes could be handled + separately for the output, but that seems to be overkill right now. + The same holds for implementing an audio mute control, this is now + part of the audio output routing. The normal case is that another + chip takes care of the actual muting so making it part of the + output routing seems to be the right thing to do for now. */ +static int m52790_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct m52790_state *state = to_state(sd); + + state->input = input; + state->output = output; + m52790_write(sd); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int m52790_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct m52790_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (reg->reg != 0) + return -EINVAL; + reg->size = 1; + reg->val = state->input | state->output; + return 0; +} + +static int m52790_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct m52790_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (reg->reg != 0) + return -EINVAL; + state->input = reg->val & 0x0303; + state->output = reg->val & ~0x0303; + m52790_write(sd); + return 0; +} +#endif + +static int m52790_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_M52790, 0); +} + +static int m52790_log_status(struct v4l2_subdev *sd) +{ + struct m52790_state *state = to_state(sd); + + v4l2_info(sd, "Switch 1: %02x\n", + (state->input | state->output) & 0xff); + v4l2_info(sd, "Switch 2: %02x\n", + (state->input | state->output) >> 8); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops m52790_core_ops = { + .log_status = m52790_log_status, + .g_chip_ident = m52790_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = m52790_g_register, + .s_register = m52790_s_register, +#endif +}; + +static const struct v4l2_subdev_audio_ops m52790_audio_ops = { + .s_routing = m52790_s_routing, +}; + +static const struct v4l2_subdev_video_ops m52790_video_ops = { + .s_routing = m52790_s_routing, +}; + +static const struct v4l2_subdev_ops m52790_ops = { + .core = &m52790_core_ops, + .audio = &m52790_audio_ops, + .video = &m52790_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +static int m52790_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct m52790_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &m52790_ops); + state->input = M52790_IN_TUNER; + state->output = M52790_OUT_STEREO; + m52790_write(sd); + return 0; +} + +static int m52790_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id m52790_id[] = { + { "m52790", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, m52790_id); + +static struct i2c_driver m52790_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "m52790", + }, + .probe = m52790_probe, + .remove = m52790_remove, + .id_table = m52790_id, +}; + +module_i2c_driver(m52790_driver); diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig new file mode 100644 index 000000000000..dc8c2505907e --- /dev/null +++ b/drivers/media/i2c/m5mols/Kconfig @@ -0,0 +1,6 @@ +config VIDEO_M5MOLS + tristate "Fujitsu M-5MOLS 8MP sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This driver supports Fujitsu M-5MOLS camera sensor with ISP diff --git a/drivers/media/i2c/m5mols/Makefile b/drivers/media/i2c/m5mols/Makefile new file mode 100644 index 000000000000..0a44e028edc7 --- /dev/null +++ b/drivers/media/i2c/m5mols/Makefile @@ -0,0 +1,3 @@ +m5mols-objs := m5mols_core.o m5mols_controls.o m5mols_capture.o + +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols.o diff --git a/drivers/media/i2c/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h new file mode 100644 index 000000000000..bb589917b65b --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols.h @@ -0,0 +1,334 @@ +/* + * Header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_H +#define M5MOLS_H + +#include <media/v4l2-subdev.h> +#include "m5mols_reg.h" + +extern int m5mols_debug; + +enum m5mols_restype { + M5MOLS_RESTYPE_MONITOR, + M5MOLS_RESTYPE_CAPTURE, + M5MOLS_RESTYPE_MAX, +}; + +/** + * struct m5mols_resolution - structure for the resolution + * @type: resolution type according to the pixel code + * @width: width of the resolution + * @height: height of the resolution + * @reg: resolution preset register value + */ +struct m5mols_resolution { + u8 reg; + enum m5mols_restype type; + u16 width; + u16 height; +}; + +/** + * struct m5mols_exif - structure for the EXIF information of M-5MOLS + * @exposure_time: exposure time register value + * @shutter_speed: speed of the shutter register value + * @aperture: aperture register value + * @exposure_bias: it calls also EV bias + * @iso_speed: ISO register value + * @flash: status register value of the flash + * @sdr: status register value of the Subject Distance Range + * @qval: not written exact meaning in document + */ +struct m5mols_exif { + u32 exposure_time; + u32 shutter_speed; + u32 aperture; + u32 brightness; + u32 exposure_bias; + u16 iso_speed; + u16 flash; + u16 sdr; + u16 qval; +}; + +/** + * struct m5mols_capture - Structure for the capture capability + * @exif: EXIF information + * @main: size in bytes of the main image + * @thumb: size in bytes of the thumb image, if it was accompanied + * @total: total size in bytes of the produced image + */ +struct m5mols_capture { + struct m5mols_exif exif; + u32 main; + u32 thumb; + u32 total; +}; + +/** + * struct m5mols_scenemode - structure for the scenemode capability + * @metering: metering light register value + * @ev_bias: EV bias register value + * @wb_mode: mode which means the WhiteBalance is Auto or Manual + * @wb_preset: whitebalance preset register value in the Manual mode + * @chroma_en: register value whether the Chroma capability is enabled or not + * @chroma_lvl: chroma's level register value + * @edge_en: register value Whether the Edge capability is enabled or not + * @edge_lvl: edge's level register value + * @af_range: Auto Focus's range + * @fd_mode: Face Detection mode + * @mcc: Multi-axis Color Conversion which means emotion color + * @light: status of the Light + * @flash: status of the Flash + * @tone: Tone color which means Contrast + * @iso: ISO register value + * @capt_mode: Mode of the Image Stabilization while the camera capturing + * @wdr: Wide Dynamic Range register value + * + * The each value according to each scenemode is recommended in the documents. + */ +struct m5mols_scenemode { + u8 metering; + u8 ev_bias; + u8 wb_mode; + u8 wb_preset; + u8 chroma_en; + u8 chroma_lvl; + u8 edge_en; + u8 edge_lvl; + u8 af_range; + u8 fd_mode; + u8 mcc; + u8 light; + u8 flash; + u8 tone; + u8 iso; + u8 capt_mode; + u8 wdr; +}; + +/** + * struct m5mols_version - firmware version information + * @customer: customer information + * @project: version of project information according to customer + * @fw: firmware revision + * @hw: hardware revision + * @param: version of the parameter + * @awb: Auto WhiteBalance algorithm version + * @str: information about manufacturer and packaging vendor + * @af: Auto Focus version + * + * The register offset starts the customer version at 0x0, and it ends + * the awb version at 0x09. The customer, project information occupies 1 bytes + * each. And also the fw, hw, param, awb each requires 2 bytes. The str is + * unique string associated with firmware's version. It includes information + * about manufacturer and the vendor of the sensor's packaging. The least + * significant 2 bytes of the string indicate packaging manufacturer. + */ +#define VERSION_STRING_SIZE 22 +struct m5mols_version { + u8 customer; + u8 project; + u16 fw; + u16 hw; + u16 param; + u16 awb; + u8 str[VERSION_STRING_SIZE]; + u8 af; +}; + +/** + * struct m5mols_info - M-5MOLS driver data structure + * @pdata: platform data + * @sd: v4l-subdev instance + * @pad: media pad + * @ffmt: current fmt according to resolution type + * @res_type: current resolution type + * @irq_waitq: waitqueue for the capture + * @irq_done: set to 1 in the interrupt handler + * @handle: control handler + * @auto_exposure: auto/manual exposure control + * @exposure_bias: exposure compensation control + * @exposure: manual exposure control + * @metering: exposure metering control + * @auto_iso: auto/manual ISO sensitivity control + * @iso: manual ISO sensitivity control + * @auto_wb: auto white balance control + * @lock_3a: 3A lock control + * @colorfx: color effect control + * @saturation: saturation control + * @zoom: zoom control + * @wdr: wide dynamic range control + * @stabilization: image stabilization control + * @jpeg_quality: JPEG compression quality control + * @ver: information of the version + * @cap: the capture mode attributes + * @isp_ready: 1 when the ISP controller has completed booting + * @power: current sensor's power status + * @ctrl_sync: 1 when the control handler state is restored in H/W + * @resolution: register value for current resolution + * @mode: register value for current operation mode + * @set_power: optional power callback to the board code + */ +struct m5mols_info { + const struct m5mols_platform_data *pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; + int res_type; + + wait_queue_head_t irq_waitq; + atomic_t irq_done; + + struct v4l2_ctrl_handler handle; + struct { + /* exposure/exposure bias/auto exposure cluster */ + struct v4l2_ctrl *auto_exposure; + struct v4l2_ctrl *exposure_bias; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *metering; + }; + struct { + /* iso/auto iso cluster */ + struct v4l2_ctrl *auto_iso; + struct v4l2_ctrl *iso; + }; + struct v4l2_ctrl *auto_wb; + + struct v4l2_ctrl *lock_3a; + struct v4l2_ctrl *colorfx; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *zoom; + struct v4l2_ctrl *wdr; + struct v4l2_ctrl *stabilization; + struct v4l2_ctrl *jpeg_quality; + + struct m5mols_version ver; + struct m5mols_capture cap; + + unsigned int isp_ready:1; + unsigned int power:1; + unsigned int ctrl_sync:1; + + u8 resolution; + u8 mode; + + int (*set_power)(struct device *dev, int on); +}; + +#define is_available_af(__info) (__info->ver.af) +#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code) +#define is_manufacturer(__info, __manufacturer) \ + (__info->ver.str[0] == __manufacturer[0] && \ + __info->ver.str[1] == __manufacturer[1]) +/* + * I2C operation of the M-5MOLS + * + * The I2C read operation of the M-5MOLS requires 2 messages. The first + * message sends the information about the command, command category, and total + * message size. The second message is used to retrieve the data specifed in + * the first message + * + * 1st message 2nd message + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * | size1 | R | category | cmd | size2 | | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * - size1: message data size(5 in this case) + * - size2: desired buffer size of the 2nd message + * - d[0..3]: according to size2 + * + * The I2C write operation needs just one message. The message includes + * category, command, total size, and desired data. + * + * 1st message + * +-------+---+----------+-----+------+------+------+------+ + * | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+------+------+------+------+ + * - d[0..3]: according to size1 + */ +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); +int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); + +int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, + int timeout); + +/* Mask value for busy waiting until M-5MOLS I2C interface is initialized */ +#define M5MOLS_I2C_RDY_WAIT_FL (1 << 16) +/* ISP state transition timeout, in ms */ +#define M5MOLS_MODE_CHANGE_TIMEOUT 200 +#define M5MOLS_BUSY_WAIT_DEF_TIMEOUT 250 + +/* + * Mode operation of the M-5MOLS + * + * Changing the mode of the M-5MOLS is needed right executing order. + * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed + * by user. There are various categories associated with each mode. + * + * +============================================================+ + * | mode | category | + * +============================================================+ + * | FLASH | FLASH(only after Stand-by or Power-on) | + * | SYSTEM | SYSTEM(only after sensor arm-booting) | + * | PARAMETER | PARAMETER | + * | MONITOR | MONITOR(preview), Auto Focus, Face Detection | + * | CAPTURE | Single CAPTURE, Preview(recording) | + * +============================================================+ + * + * The available executing order between each modes are as follows: + * PARAMETER <---> MONITOR <---> CAPTURE + */ +int m5mols_set_mode(struct m5mols_info *info, u8 mode); + +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg); +int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 condition, u32 timeout); +int m5mols_restore_controls(struct m5mols_info *info); +int m5mols_start_capture(struct m5mols_info *info); +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode); +int m5mols_lock_3a(struct m5mols_info *info, bool lock); +int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); +int m5mols_init_controls(struct v4l2_subdev *sd); + +/* The firmware function */ +int m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)); + +static inline struct m5mols_info *to_m5mols(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct m5mols_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + struct m5mols_info *info = container_of(ctrl->handler, + struct m5mols_info, handle); + return &info->sd; +} + +static inline void m5mols_set_ctrl_mode(struct v4l2_ctrl *ctrl, + unsigned int mode) +{ + ctrl->priv = (void *)mode; +} + +static inline unsigned int m5mols_get_ctrl_mode(struct v4l2_ctrl *ctrl) +{ + return (unsigned int)ctrl->priv; +} + +#endif /* M5MOLS_H */ diff --git a/drivers/media/i2c/m5mols/m5mols_capture.c b/drivers/media/i2c/m5mols/m5mols_capture.c new file mode 100644 index 000000000000..cb243bd278ce --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_capture.c @@ -0,0 +1,155 @@ + +/* + * The Capture code for Fujitsu M-5MOLS ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/m5mols.h> +#include <media/s5p_fimc.h> + +#include "m5mols.h" +#include "m5mols_reg.h" + +/** + * m5mols_read_rational - I2C read of a rational number + * + * Read numerator and denominator from registers @addr_num and @addr_den + * respectively and return the division result in @val. + */ +static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, + u32 addr_den, u32 *val) +{ + u32 num, den; + + int ret = m5mols_read_u32(sd, addr_num, &num); + if (!ret) + ret = m5mols_read_u32(sd, addr_den, &den); + if (ret) + return ret; + *val = den == 0 ? 0 : num / den; + return ret; +} + +/** + * m5mols_capture_info - Gather captured image information + * + * For now it gathers only EXIF information and file size. + */ +static int m5mols_capture_info(struct m5mols_info *info) +{ + struct m5mols_exif *exif = &info->cap.exif; + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU, + EXIF_INFO_EXPTIME_DE, &exif->exposure_time); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE, + &exif->shutter_speed); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE, + &exif->aperture); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE, + &exif->brightness); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE, + &exif->exposure_bias); + if (ret) + return ret; + + ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed); + if (!ret) + ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash); + if (!ret) + ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr); + if (!ret) + ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval); + if (ret) + return ret; + + if (!ret) + ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main); + if (!ret) + ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb); + if (!ret) + info->cap.total = info->cap.main + info->cap.thumb; + + return ret; +} + +int m5mols_start_capture(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + int ret; + + /* + * Synchronize the controls, set the capture frame resolution and color + * format. The frame capture is initiated during switching from Monitor + * to Capture mode. + */ + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_restore_controls(info); + if (!ret) + ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG); + if (!ret) + ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, info->resolution); + if (!ret) + ret = m5mols_set_mode(info, REG_CAPTURE); + if (!ret) + /* Wait until a frame is captured to ISP internal memory */ + ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000); + if (ret) + return ret; + + /* + * Initiate the captured data transfer to a MIPI-CSI receiver. + */ + ret = m5mols_write(sd, CAPC_SEL_FRAME, 1); + if (!ret) + ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN); + if (!ret) { + bool captured = false; + unsigned int size; + + /* Wait for the capture completion interrupt */ + ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000); + if (!ret) { + captured = true; + ret = m5mols_capture_info(info); + } + size = captured ? info->cap.main : 0; + v4l2_dbg(1, m5mols_debug, sd, "%s: size: %d, thumb.: %d B\n", + __func__, size, info->cap.thumb); + + v4l2_subdev_notify(sd, S5P_FIMC_TX_END_NOTIFY, &size); + } + + return ret; +} diff --git a/drivers/media/i2c/m5mols/m5mols_controls.c b/drivers/media/i2c/m5mols/m5mols_controls.c new file mode 100644 index 000000000000..fdbc205a2969 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_controls.c @@ -0,0 +1,628 @@ +/* + * Controls for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> + +#include "m5mols.h" +#include "m5mols_reg.h" + +static struct m5mols_scenemode m5mols_default_scenemode[] = { + [REG_SCENE_NORMAL] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_NORMAL, REG_LIGHT_OFF, REG_FLASH_OFF, + 5, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_PORTRAIT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 4, + REG_AF_NORMAL, BIT_FD_EN | BIT_FD_DRAW_FACE_FRAME, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_LANDSCAPE] = { + REG_AE_ALL, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 6, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_SPORTS] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_PARTY_INDOOR] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_200, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_BEACH_SNOW] = { + REG_AE_CENTER, REG_AE_INDEX_10_POS, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_SUNSET] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET, + REG_AWB_DAYLIGHT, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_DAWN_DUSK] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET, + REG_AWB_FLUORESCENT_1, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_FALL] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 5, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_NIGHT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_AGAINST_LIGHT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_FIRE] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_TEXT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 7, + REG_AF_MACRO, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_ANTI_SHAKE, REG_WDR_ON, + }, + [REG_SCENE_CANDLE] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, +}; + +/** + * m5mols_do_scenemode() - Change current scenemode + * @mode: Desired mode of the scenemode + * + * WARNING: The execution order is important. Do not change the order. + */ +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode) +{ + struct v4l2_subdev *sd = &info->sd; + struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode]; + int ret; + + if (mode > REG_SCENE_CANDLE) + return -EINVAL; + + ret = v4l2_ctrl_s_ctrl(info->lock_3a, 0); + if (!ret) + ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, mode); + if (!ret) + ret = m5mols_write(sd, AE_EV_PRESET_CAPTURE, mode); + if (!ret) + ret = m5mols_write(sd, AE_MODE, scenemode.metering); + if (!ret) + ret = m5mols_write(sd, AE_INDEX, scenemode.ev_bias); + if (!ret) + ret = m5mols_write(sd, AWB_MODE, scenemode.wb_mode); + if (!ret) + ret = m5mols_write(sd, AWB_MANUAL, scenemode.wb_preset); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_EN, scenemode.chroma_en); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_LVL, scenemode.chroma_lvl); + if (!ret) + ret = m5mols_write(sd, MON_EDGE_EN, scenemode.edge_en); + if (!ret) + ret = m5mols_write(sd, MON_EDGE_LVL, scenemode.edge_lvl); + if (!ret && is_available_af(info)) + ret = m5mols_write(sd, AF_MODE, scenemode.af_range); + if (!ret && is_available_af(info)) + ret = m5mols_write(sd, FD_CTL, scenemode.fd_mode); + if (!ret) + ret = m5mols_write(sd, MON_TONE_CTL, scenemode.tone); + if (!ret) + ret = m5mols_write(sd, AE_ISO, scenemode.iso); + if (!ret) + ret = m5mols_set_mode(info, REG_CAPTURE); + if (!ret) + ret = m5mols_write(sd, CAPP_WDR_EN, scenemode.wdr); + if (!ret) + ret = m5mols_write(sd, CAPP_MCC_MODE, scenemode.mcc); + if (!ret) + ret = m5mols_write(sd, CAPP_LIGHT_CTRL, scenemode.light); + if (!ret) + ret = m5mols_write(sd, CAPP_FLASH_CTRL, scenemode.flash); + if (!ret) + ret = m5mols_write(sd, CAPC_MODE, scenemode.capt_mode); + if (!ret) + ret = m5mols_set_mode(info, REG_MONITOR); + + return ret; +} + +static int m5mols_3a_lock(struct m5mols_info *info, struct v4l2_ctrl *ctrl) +{ + bool af_lock = ctrl->val & V4L2_LOCK_FOCUS; + int ret = 0; + + if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_EXPOSURE) { + bool ae_lock = ctrl->val & V4L2_LOCK_EXPOSURE; + + ret = m5mols_write(&info->sd, AE_LOCK, ae_lock ? + REG_AE_LOCK : REG_AE_UNLOCK); + if (ret) + return ret; + } + + if (((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_WHITE_BALANCE) + && info->auto_wb->val) { + bool awb_lock = ctrl->val & V4L2_LOCK_WHITE_BALANCE; + + ret = m5mols_write(&info->sd, AWB_LOCK, awb_lock ? + REG_AWB_LOCK : REG_AWB_UNLOCK); + if (ret) + return ret; + } + + if (!info->ver.af || !af_lock) + return ret; + + if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_FOCUS) + ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); + + return ret; +} + +static int m5mols_set_metering_mode(struct m5mols_info *info, int mode) +{ + unsigned int metering; + + switch (mode) { + case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: + metering = REG_AE_CENTER; + break; + case V4L2_EXPOSURE_METERING_SPOT: + metering = REG_AE_SPOT; + break; + default: + metering = REG_AE_ALL; + break; + } + + return m5mols_write(&info->sd, AE_MODE, metering); +} + +static int m5mols_set_exposure(struct m5mols_info *info, int exposure) +{ + struct v4l2_subdev *sd = &info->sd; + int ret = 0; + + if (exposure == V4L2_EXPOSURE_AUTO) { + /* Unlock auto exposure */ + info->lock_3a->val &= ~V4L2_LOCK_EXPOSURE; + m5mols_3a_lock(info, info->lock_3a); + + ret = m5mols_set_metering_mode(info, info->metering->val); + if (ret < 0) + return ret; + + v4l2_dbg(1, m5mols_debug, sd, + "%s: exposure bias: %#x, metering: %#x\n", + __func__, info->exposure_bias->val, + info->metering->val); + + return m5mols_write(sd, AE_INDEX, info->exposure_bias->val); + } + + if (exposure == V4L2_EXPOSURE_MANUAL) { + ret = m5mols_write(sd, AE_MODE, REG_AE_OFF); + if (ret == 0) + ret = m5mols_write(sd, AE_MAN_GAIN_MON, + info->exposure->val); + if (ret == 0) + ret = m5mols_write(sd, AE_MAN_GAIN_CAP, + info->exposure->val); + + v4l2_dbg(1, m5mols_debug, sd, "%s: exposure: %#x\n", + __func__, info->exposure->val); + } + + return ret; +} + +static int m5mols_set_white_balance(struct m5mols_info *info, int val) +{ + static const unsigned short wb[][2] = { + { V4L2_WHITE_BALANCE_INCANDESCENT, REG_AWB_INCANDESCENT }, + { V4L2_WHITE_BALANCE_FLUORESCENT, REG_AWB_FLUORESCENT_1 }, + { V4L2_WHITE_BALANCE_FLUORESCENT_H, REG_AWB_FLUORESCENT_2 }, + { V4L2_WHITE_BALANCE_HORIZON, REG_AWB_HORIZON }, + { V4L2_WHITE_BALANCE_DAYLIGHT, REG_AWB_DAYLIGHT }, + { V4L2_WHITE_BALANCE_FLASH, REG_AWB_LEDLIGHT }, + { V4L2_WHITE_BALANCE_CLOUDY, REG_AWB_CLOUDY }, + { V4L2_WHITE_BALANCE_SHADE, REG_AWB_SHADE }, + { V4L2_WHITE_BALANCE_AUTO, REG_AWB_AUTO }, + }; + int i; + struct v4l2_subdev *sd = &info->sd; + int ret = -EINVAL; + + for (i = 0; i < ARRAY_SIZE(wb); i++) { + int awb; + if (wb[i][0] != val) + continue; + + v4l2_dbg(1, m5mols_debug, sd, + "Setting white balance to: %#x\n", wb[i][0]); + + awb = wb[i][0] == V4L2_WHITE_BALANCE_AUTO; + ret = m5mols_write(sd, AWB_MODE, awb ? REG_AWB_AUTO : + REG_AWB_PRESET); + if (ret < 0) + return ret; + + if (!awb) + ret = m5mols_write(sd, AWB_MANUAL, wb[i][1]); + } + + return ret; +} + +static int m5mols_set_saturation(struct m5mols_info *info, int val) +{ + int ret = m5mols_write(&info->sd, MON_CHROMA_LVL, val); + if (ret < 0) + return ret; + + return m5mols_write(&info->sd, MON_CHROMA_EN, REG_CHROMA_ON); +} + +static int m5mols_set_color_effect(struct m5mols_info *info, int val) +{ + unsigned int m_effect = REG_COLOR_EFFECT_OFF; + unsigned int p_effect = REG_EFFECT_OFF; + unsigned int cfix_r = 0, cfix_b = 0; + struct v4l2_subdev *sd = &info->sd; + int ret = 0; + + switch (val) { + case V4L2_COLORFX_BW: + m_effect = REG_COLOR_EFFECT_ON; + break; + case V4L2_COLORFX_NEGATIVE: + p_effect = REG_EFFECT_NEGA; + break; + case V4L2_COLORFX_EMBOSS: + p_effect = REG_EFFECT_EMBOSS; + break; + case V4L2_COLORFX_SEPIA: + m_effect = REG_COLOR_EFFECT_ON; + cfix_r = REG_CFIXR_SEPIA; + cfix_b = REG_CFIXB_SEPIA; + break; + } + + ret = m5mols_write(sd, PARM_EFFECT, p_effect); + if (!ret) + ret = m5mols_write(sd, MON_EFFECT, m_effect); + + if (ret == 0 && m_effect == REG_COLOR_EFFECT_ON) { + ret = m5mols_write(sd, MON_CFIXR, cfix_r); + if (!ret) + ret = m5mols_write(sd, MON_CFIXB, cfix_b); + } + + v4l2_dbg(1, m5mols_debug, sd, + "p_effect: %#x, m_effect: %#x, r: %#x, b: %#x (%d)\n", + p_effect, m_effect, cfix_r, cfix_b, ret); + + return ret; +} + +static int m5mols_set_iso(struct m5mols_info *info, int auto_iso) +{ + u32 iso = auto_iso ? 0 : info->iso->val + 1; + + return m5mols_write(&info->sd, AE_ISO, iso); +} + +static int m5mols_set_wdr(struct m5mols_info *info, int wdr) +{ + int ret; + + ret = m5mols_write(&info->sd, MON_TONE_CTL, wdr ? 9 : 5); + if (ret < 0) + return ret; + + ret = m5mols_set_mode(info, REG_CAPTURE); + if (ret < 0) + return ret; + + return m5mols_write(&info->sd, CAPP_WDR_EN, wdr); +} + +static int m5mols_set_stabilization(struct m5mols_info *info, int val) +{ + struct v4l2_subdev *sd = &info->sd; + unsigned int evp = val ? 0xe : 0x0; + int ret; + + ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, evp); + if (ret < 0) + return ret; + + return m5mols_write(sd, AE_EV_PRESET_CAPTURE, evp); +} + +static int m5mols_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct m5mols_info *info = to_m5mols(sd); + int ret = 0; + u8 status; + + v4l2_dbg(1, m5mols_debug, sd, "%s: ctrl: %s (%d)\n", + __func__, ctrl->name, info->isp_ready); + + if (!info->isp_ready) + return -EBUSY; + + switch (ctrl->id) { + case V4L2_CID_ISO_SENSITIVITY_AUTO: + ret = m5mols_read_u8(sd, AE_ISO, &status); + if (ret == 0) + ctrl->val = !status; + if (status != REG_ISO_AUTO) + info->iso->val = status - 1; + break; + + case V4L2_CID_3A_LOCK: + ctrl->val &= ~0x7; + + ret = m5mols_read_u8(sd, AE_LOCK, &status); + if (ret) + return ret; + if (status) + info->lock_3a->val |= V4L2_LOCK_EXPOSURE; + + ret = m5mols_read_u8(sd, AWB_LOCK, &status); + if (ret) + return ret; + if (status) + info->lock_3a->val |= V4L2_LOCK_EXPOSURE; + + ret = m5mols_read_u8(sd, AF_EXECUTE, &status); + if (!status) + info->lock_3a->val |= V4L2_LOCK_EXPOSURE; + break; + } + + return ret; +} + +static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl) +{ + unsigned int ctrl_mode = m5mols_get_ctrl_mode(ctrl); + struct v4l2_subdev *sd = to_sd(ctrl); + struct m5mols_info *info = to_m5mols(sd); + int last_mode = info->mode; + int ret = 0; + + /* + * If needed, defer restoring the controls until + * the device is fully initialized. + */ + if (!info->isp_ready) { + info->ctrl_sync = 0; + return 0; + } + + v4l2_dbg(1, m5mols_debug, sd, "%s: %s, val: %d, priv: %#x\n", + __func__, ctrl->name, ctrl->val, (int)ctrl->priv); + + if (ctrl_mode && ctrl_mode != info->mode) { + ret = m5mols_set_mode(info, ctrl_mode); + if (ret < 0) + return ret; + } + + switch (ctrl->id) { + case V4L2_CID_3A_LOCK: + ret = m5mols_3a_lock(info, ctrl); + break; + + case V4L2_CID_ZOOM_ABSOLUTE: + ret = m5mols_write(sd, MON_ZOOM, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + ret = m5mols_set_exposure(info, ctrl->val); + break; + + case V4L2_CID_ISO_SENSITIVITY: + ret = m5mols_set_iso(info, ctrl->val); + break; + + case V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE: + ret = m5mols_set_white_balance(info, ctrl->val); + break; + + case V4L2_CID_SATURATION: + ret = m5mols_set_saturation(info, ctrl->val); + break; + + case V4L2_CID_COLORFX: + ret = m5mols_set_color_effect(info, ctrl->val); + break; + + case V4L2_CID_WIDE_DYNAMIC_RANGE: + ret = m5mols_set_wdr(info, ctrl->val); + break; + + case V4L2_CID_IMAGE_STABILIZATION: + ret = m5mols_set_stabilization(info, ctrl->val); + break; + + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + ret = m5mols_write(sd, CAPP_JPEG_RATIO, ctrl->val); + break; + } + + if (ret == 0 && info->mode != last_mode) + ret = m5mols_set_mode(info, last_mode); + + return ret; +} + +static const struct v4l2_ctrl_ops m5mols_ctrl_ops = { + .g_volatile_ctrl = m5mols_g_volatile_ctrl, + .s_ctrl = m5mols_s_ctrl, +}; + +/* Supported manual ISO values */ +static const s64 iso_qmenu[] = { + /* AE_ISO: 0x01...0x07 (ISO: 50...3200) */ + 50000, 100000, 200000, 400000, 800000, 1600000, 3200000 +}; + +/* Supported Exposure Bias values, -2.0EV...+2.0EV */ +static const s64 ev_bias_qmenu[] = { + /* AE_INDEX: 0x00...0x08 */ + -2000, -1500, -1000, -500, 0, 500, 1000, 1500, 2000 +}; + +int m5mols_init_controls(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + u16 exposure_max; + u16 zoom_step; + int ret; + + /* Determine the firmware dependant control range and step values */ + ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &exposure_max); + if (ret < 0) + return ret; + + zoom_step = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1; + v4l2_ctrl_handler_init(&info->handle, 20); + + info->auto_wb = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, + 9, ~0x3fe, V4L2_WHITE_BALANCE_AUTO); + + /* Exposure control cluster */ + info->auto_exposure = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, + 1, ~0x03, V4L2_EXPOSURE_AUTO); + + info->exposure = v4l2_ctrl_new_std(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE, + 0, exposure_max, 1, exposure_max / 2); + + info->exposure_bias = v4l2_ctrl_new_int_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_AUTO_EXPOSURE_BIAS, + ARRAY_SIZE(ev_bias_qmenu) - 1, + ARRAY_SIZE(ev_bias_qmenu)/2 - 1, + ev_bias_qmenu); + + info->metering = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE_METERING, + 2, ~0x7, V4L2_EXPOSURE_METERING_AVERAGE); + + /* ISO control cluster */ + info->auto_iso = v4l2_ctrl_new_std_menu(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_ISO_SENSITIVITY_AUTO, 1, ~0x03, 1); + + info->iso = v4l2_ctrl_new_int_menu(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_ISO_SENSITIVITY, ARRAY_SIZE(iso_qmenu) - 1, + ARRAY_SIZE(iso_qmenu)/2 - 1, iso_qmenu); + + info->saturation = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_SATURATION, 1, 5, 1, 3); + + info->zoom = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_ZOOM_ABSOLUTE, 1, 70, zoom_step, 1); + + info->colorfx = v4l2_ctrl_new_std_menu(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_COLORFX, 4, 0, V4L2_COLORFX_NONE); + + info->wdr = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_WIDE_DYNAMIC_RANGE, 0, 1, 1, 0); + + info->stabilization = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_IMAGE_STABILIZATION, 0, 1, 1, 0); + + info->jpeg_quality = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 1, 100, 1, 80); + + info->lock_3a = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops, + V4L2_CID_3A_LOCK, 0, 0x7, 0, 0); + + if (info->handle.error) { + int ret = info->handle.error; + v4l2_err(sd, "Failed to initialize controls: %d\n", ret); + v4l2_ctrl_handler_free(&info->handle); + return ret; + } + + v4l2_ctrl_auto_cluster(4, &info->auto_exposure, 1, false); + info->auto_iso->flags |= V4L2_CTRL_FLAG_VOLATILE | + V4L2_CTRL_FLAG_UPDATE; + v4l2_ctrl_auto_cluster(2, &info->auto_iso, 0, false); + + info->lock_3a->flags |= V4L2_CTRL_FLAG_VOLATILE; + + m5mols_set_ctrl_mode(info->auto_exposure, REG_PARAMETER); + m5mols_set_ctrl_mode(info->auto_wb, REG_PARAMETER); + m5mols_set_ctrl_mode(info->colorfx, REG_MONITOR); + + sd->ctrl_handler = &info->handle; + + return 0; +} diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c new file mode 100644 index 000000000000..ac7d28b6ddf2 --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -0,0 +1,990 @@ +/* + * Driver for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/videodev2.h> +#include <linux/module.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/m5mols.h> + +#include "m5mols.h" +#include "m5mols_reg.h" + +int m5mols_debug; +module_param(m5mols_debug, int, 0644); + +#define MODULE_NAME "M5MOLS" +#define M5MOLS_I2C_CHECK_RETRY 500 + +/* The regulator consumer names for external voltage regulators */ +static struct regulator_bulk_data supplies[] = { + { + .supply = "core", /* ARM core power, 1.2V */ + }, { + .supply = "dig_18", /* digital power 1, 1.8V */ + }, { + .supply = "d_sensor", /* sensor power 1, 1.8V */ + }, { + .supply = "dig_28", /* digital power 2, 2.8V */ + }, { + .supply = "a_sensor", /* analog power */ + }, { + .supply = "dig_12", /* digital power 3, 1.2V */ + }, +}; + +static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = { + [M5MOLS_RESTYPE_MONITOR] = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + [M5MOLS_RESTYPE_CAPTURE] = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_JPEG_1X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, +}; +#define SIZE_DEFAULT_FFMT ARRAY_SIZE(m5mols_default_ffmt) + +static const struct m5mols_resolution m5mols_reg_res[] = { + { 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 }, /* SUB-QCIF */ + { 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 }, /* QQVGA */ + { 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 }, /* QCIF */ + { 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 }, + { 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 }, /* QVGA */ + { 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 }, /* QVGA */ + { 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 }, /* WQVGA */ + { 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 }, /* WQVGA */ + { 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 }, /* CIF */ + { 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 }, + { 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 }, /* qHD */ + { 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 }, /* VGA */ + { 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 }, + { 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 }, /* WVGA */ + { 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 }, /* SVGA */ + { 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 }, /* HD */ + { 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 }, /* 1080p */ + { 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 }, /* 2.63fps 8M */ + { 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 }, /* AHS_MON debug */ + + { 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 }, /* QVGA */ + { 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 }, /* WQVGA */ + { 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 }, + { 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 }, /* qHD */ + { 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 }, /* VGA */ + { 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 }, /* WVGA */ + { 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 }, /* HD */ + { 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 }, /* 1M */ + { 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 }, /* 2M */ + { 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 }, /* Full-HD */ + { 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 }, /* 3Mega */ + { 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 }, + { 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 }, /* 4Mega */ + { 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 }, + { 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 }, /* 5Mega */ + { 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 }, /* 6Mega */ + { 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 }, + { 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 }, /* 8Mega */ +}; + +/** + * m5mols_swap_byte - an byte array to integer conversion function + * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet + * + * Convert I2C data byte array with performing any required byte + * reordering to assure proper values for each data type, regardless + * of the architecture endianness. + */ +static u32 m5mols_swap_byte(u8 *data, u8 length) +{ + if (length == 1) + return *data; + else if (length == 2) + return be16_to_cpu(*((u16 *)data)); + else + return be32_to_cpu(*((u32 *)data)); +} + +/** + * m5mols_read - I2C read function + * @reg: combination of size, category and command for the I2C packet + * @size: desired size of I2C packet + * @val: read value + * + * Returns 0 on success, or else negative errno. + */ +static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct m5mols_info *info = to_m5mols(sd); + u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; + u8 category = I2C_CATEGORY(reg); + u8 cmd = I2C_COMMAND(reg); + struct i2c_msg msg[2]; + u8 wbuf[5]; + int ret; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 5; + msg[0].buf = wbuf; + wbuf[0] = 5; + wbuf[1] = M5MOLS_BYTE_READ; + wbuf[2] = category; + wbuf[3] = cmd; + wbuf[4] = size; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = size + 1; + msg[1].buf = rbuf; + + /* minimum stabilization time */ + usleep_range(200, 200); + + ret = i2c_transfer(client->adapter, msg, 2); + + if (ret == 2) { + *val = m5mols_swap_byte(&rbuf[1], size); + return 0; + } + + if (info->isp_ready) + v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n", + size, category, cmd, ret); + + return ret < 0 ? ret : -EIO; +} + +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 1) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u8)val_32; + return ret; +} + +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 2) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u16)val_32; + return ret; +} + +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val) +{ + if (I2C_SIZE(reg) != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + return m5mols_read(sd, I2C_SIZE(reg), reg, val); +} + +/** + * m5mols_write - I2C command write function + * @reg: combination of size, category and command for the I2C packet + * @val: value to write + * + * Returns 0 on success, or else negative errno. + */ +int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct m5mols_info *info = to_m5mols(sd); + u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4]; + u8 category = I2C_CATEGORY(reg); + u8 cmd = I2C_COMMAND(reg); + u8 size = I2C_SIZE(reg); + u32 *buf = (u32 *)&wbuf[4]; + struct i2c_msg msg[1]; + int ret; + + if (!client->adapter) + return -ENODEV; + + if (size != 1 && size != 2 && size != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + msg->addr = client->addr; + msg->flags = 0; + msg->len = (u16)size + 4; + msg->buf = wbuf; + wbuf[0] = size + 4; + wbuf[1] = M5MOLS_BYTE_WRITE; + wbuf[2] = category; + wbuf[3] = cmd; + + *buf = m5mols_swap_byte((u8 *)&val, size); + + usleep_range(200, 200); + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret == 1) + return 0; + + if (info->isp_ready) + v4l2_err(sd, "write failed: cat:%02x cmd:%02x ret:%d\n", + category, cmd, ret); + + return ret < 0 ? ret : -EIO; +} + +/** + * m5mols_busy_wait - Busy waiting with I2C register polling + * @reg: the I2C_REG() address of an 8-bit status register to check + * @value: expected status register value + * @mask: bit mask for the read status register value + * @timeout: timeout in miliseconds, or -1 for default timeout + * + * The @reg register value is ORed with @mask before comparing with @value. + * + * Return: 0 if the requested condition became true within less than + * @timeout ms, or else negative errno. + */ +int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask, + int timeout) +{ + int ms = timeout < 0 ? M5MOLS_BUSY_WAIT_DEF_TIMEOUT : timeout; + unsigned long end = jiffies + msecs_to_jiffies(ms); + u8 status; + + do { + int ret = m5mols_read_u8(sd, reg, &status); + + if (ret < 0 && !(mask & M5MOLS_I2C_RDY_WAIT_FL)) + return ret; + if (!ret && (status & mask & 0xff) == (value & 0xff)) + return 0; + usleep_range(100, 250); + } while (ms > 0 && time_is_after_jiffies(end)); + + return -EBUSY; +} + +/** + * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts + * + * Before writing desired interrupt value the INT_FACTOR register should + * be read to clear pending interrupts. + */ +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg) +{ + struct m5mols_info *info = to_m5mols(sd); + u8 mask = is_available_af(info) ? REG_INT_AF : 0; + u8 dummy; + int ret; + + ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy); + if (!ret) + ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); + return ret; +} + +int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout) +{ + struct m5mols_info *info = to_m5mols(sd); + + int ret = wait_event_interruptible_timeout(info->irq_waitq, + atomic_add_unless(&info->irq_done, -1, 0), + msecs_to_jiffies(timeout)); + if (ret <= 0) + return ret ? ret : -ETIMEDOUT; + + return m5mols_busy_wait(sd, SYSTEM_INT_FACTOR, irq_mask, + M5MOLS_I2C_RDY_WAIT_FL | irq_mask, -1); +} + +/** + * m5mols_reg_mode - Write the mode and check busy status + * + * It always accompanies a little delay changing the M-5MOLS mode, so it is + * needed checking current busy status to guarantee right mode. + */ +static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) +{ + int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); + if (ret < 0) + return ret; + return m5mols_busy_wait(sd, SYSTEM_SYSMODE, mode, 0xff, + M5MOLS_MODE_CHANGE_TIMEOUT); +} + +/** + * m5mols_set_mode - set the M-5MOLS controller mode + * @mode: the required operation mode + * + * The commands of M-5MOLS are grouped into specific modes. Each functionality + * can be guaranteed only when the sensor is operating in mode which a command + * belongs to. + */ +int m5mols_set_mode(struct m5mols_info *info, u8 mode) +{ + struct v4l2_subdev *sd = &info->sd; + int ret = -EINVAL; + u8 reg; + + if (mode < REG_PARAMETER || mode > REG_CAPTURE) + return ret; + + ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); + if (ret || reg == mode) + return ret; + + switch (reg) { + case REG_PARAMETER: + ret = m5mols_reg_mode(sd, REG_MONITOR); + if (mode == REG_MONITOR) + break; + if (!ret) + ret = m5mols_reg_mode(sd, REG_CAPTURE); + break; + + case REG_MONITOR: + if (mode == REG_PARAMETER) { + ret = m5mols_reg_mode(sd, REG_PARAMETER); + break; + } + + ret = m5mols_reg_mode(sd, REG_CAPTURE); + break; + + case REG_CAPTURE: + ret = m5mols_reg_mode(sd, REG_MONITOR); + if (mode == REG_MONITOR) + break; + if (!ret) + ret = m5mols_reg_mode(sd, REG_PARAMETER); + break; + + default: + v4l2_warn(sd, "Wrong mode: %d\n", mode); + } + + if (!ret) + info->mode = mode; + + return ret; +} + +/** + * m5mols_get_version - retrieve full revisions information of M-5MOLS + * + * The version information includes revisions of hardware and firmware, + * AutoFocus alghorithm version and the version string. + */ +static int m5mols_get_version(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + struct m5mols_version *ver = &info->ver; + u8 *str = ver->str; + int i; + int ret; + + ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer); + if (!ret) + ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb); + if (!ret) + ret = m5mols_read_u8(sd, AF_VERSION, &ver->af); + if (ret) + return ret; + + for (i = 0; i < VERSION_STRING_SIZE; i++) { + ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]); + if (ret) + return ret; + } + + ver->fw = be16_to_cpu(ver->fw); + ver->hw = be16_to_cpu(ver->hw); + ver->param = be16_to_cpu(ver->param); + ver->awb = be16_to_cpu(ver->awb); + + v4l2_info(sd, "Manufacturer\t[%s]\n", + is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? + "Samsung Electro-Machanics" : + is_manufacturer(info, REG_SAMSUNG_OPTICS) ? + "Samsung Fiber-Optics" : + is_manufacturer(info, REG_SAMSUNG_TECHWIN) ? + "Samsung Techwin" : "None"); + v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n", + info->ver.customer, info->ver.project); + + if (!is_available_af(info)) + v4l2_info(sd, "No support Auto Focus on this firmware\n"); + + return ret; +} + +/** + * __find_restype - Lookup M-5MOLS resolution type according to pixel code + * @code: pixel code + */ +static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code) +{ + enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR; + + do { + if (code == m5mols_default_ffmt[type].code) + return type; + } while (type++ != SIZE_DEFAULT_FFMT); + + return 0; +} + +/** + * __find_resolution - Lookup preset and type of M-5MOLS's resolution + * @mf: pixel format to find/negotiate the resolution preset for + * @type: M-5MOLS resolution type + * @resolution: M-5MOLS resolution preset register value + * + * Find nearest resolution matching resolution preset and adjust mf + * to supported values. + */ +static int __find_resolution(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf, + enum m5mols_restype *type, + u32 *resolution) +{ + const struct m5mols_resolution *fsize = &m5mols_reg_res[0]; + const struct m5mols_resolution *match = NULL; + enum m5mols_restype stype = __find_restype(mf->code); + int i = ARRAY_SIZE(m5mols_reg_res); + unsigned int min_err = ~0; + + while (i--) { + int err; + if (stype == fsize->type) { + err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + + if (err < min_err) { + min_err = err; + match = fsize; + } + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + *resolution = match->reg; + *type = stype; + return 0; + } + + return -EINVAL; +} + +static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info, + struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which, + enum m5mols_restype type) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL; + + return &info->ffmt[type]; +} + +static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *format; + + format = __find_format(info, fh, fmt->which, info->res_type); + if (!format) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *format = &fmt->format; + struct v4l2_mbus_framefmt *sfmt; + enum m5mols_restype type; + u32 resolution = 0; + int ret; + + ret = __find_resolution(sd, format, &type, &resolution); + if (ret < 0) + return ret; + + sfmt = __find_format(info, fh, fmt->which, type); + if (!sfmt) + return 0; + + + format->code = m5mols_default_ffmt[type].code; + format->colorspace = V4L2_COLORSPACE_JPEG; + format->field = V4L2_FIELD_NONE; + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + *sfmt = *format; + info->resolution = resolution; + info->res_type = type; + } + + return 0; +} + +static int m5mols_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (!code || code->index >= SIZE_DEFAULT_FFMT) + return -EINVAL; + + code->code = m5mols_default_ffmt[code->index].code; + + return 0; +} + +static struct v4l2_subdev_pad_ops m5mols_pad_ops = { + .enum_mbus_code = m5mols_enum_mbus_code, + .get_fmt = m5mols_get_fmt, + .set_fmt = m5mols_set_fmt, +}; + +/** + * m5mols_restore_controls - Apply current control values to the registers + * + * m5mols_do_scenemode() handles all parameters for which there is yet no + * individual control. It should be replaced at some point by setting each + * control individually, in required register set up order. + */ +int m5mols_restore_controls(struct m5mols_info *info) +{ + int ret; + + if (info->ctrl_sync) + return 0; + + ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL); + if (ret) + return ret; + + ret = v4l2_ctrl_handler_setup(&info->handle); + info->ctrl_sync = !ret; + + return ret; +} + +/** + * m5mols_start_monitor - Start the monitor mode + * + * Before applying the controls setup the resolution and frame rate + * in PARAMETER mode, and then switch over to MONITOR mode. + */ +static int m5mols_start_monitor(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_set_mode(info, REG_PARAMETER); + if (!ret) + ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution); + if (!ret) + ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30); + if (!ret) + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_restore_controls(info); + + return ret; +} + +static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct m5mols_info *info = to_m5mols(sd); + u32 code = info->ffmt[info->res_type].code; + + if (enable) { + int ret = -EINVAL; + + if (is_code(code, M5MOLS_RESTYPE_MONITOR)) + ret = m5mols_start_monitor(info); + if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) + ret = m5mols_start_capture(info); + + return ret; + } + + return m5mols_set_mode(info, REG_PARAMETER); +} + +static const struct v4l2_subdev_video_ops m5mols_video_ops = { + .s_stream = m5mols_s_stream, +}; + +static int m5mols_sensor_power(struct m5mols_info *info, bool enable) +{ + struct v4l2_subdev *sd = &info->sd; + struct i2c_client *client = v4l2_get_subdevdata(sd); + const struct m5mols_platform_data *pdata = info->pdata; + int ret; + + if (info->power == enable) + return 0; + + if (enable) { + if (info->set_power) { + ret = info->set_power(&client->dev, 1); + if (ret) + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); + if (ret) { + info->set_power(&client->dev, 0); + return ret; + } + + gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity); + info->power = 1; + + return ret; + } + + ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); + if (ret) + return ret; + + if (info->set_power) + info->set_power(&client->dev, 0); + + gpio_set_value(pdata->gpio_reset, pdata->reset_polarity); + + info->isp_ready = 0; + info->power = 0; + + return ret; +} + +/* m5mols_update_fw - optional firmware update routine */ +int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)) +{ + return 0; +} + +/** + * m5mols_fw_start - M-5MOLS internal ARM controller initialization + * + * Execute the M-5MOLS internal ARM controller initialization sequence. + * This function should be called after the supply voltage has been + * applied and before any requests to the device are made. + */ +static int m5mols_fw_start(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + int ret; + + atomic_set(&info->irq_done, 0); + /* Wait until I2C slave is initialized in Flash Writer mode */ + ret = m5mols_busy_wait(sd, FLASH_CAM_START, REG_IN_FLASH_MODE, + M5MOLS_I2C_RDY_WAIT_FL | 0xff, -1); + if (!ret) + ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT); + if (!ret) + ret = m5mols_wait_interrupt(sd, REG_INT_MODE, 2000); + if (ret < 0) + return ret; + + info->isp_ready = 1; + + ret = m5mols_get_version(sd); + if (!ret) + ret = m5mols_update_fw(sd, m5mols_sensor_power); + if (ret) + return ret; + + v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n"); + + ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI); + if (!ret) + ret = m5mols_enable_interrupt(sd, + REG_INT_AF | REG_INT_CAPTURE); + + return ret; +} + +/** + * m5mols_s_power - Main sensor power control function + * + * To prevent breaking the lens when the sensor is powered off the Soft-Landing + * algorithm is called where available. The Soft-Landing algorithm availability + * dependends on the firmware provider. + */ +static int m5mols_s_power(struct v4l2_subdev *sd, int on) +{ + struct m5mols_info *info = to_m5mols(sd); + int ret; + + if (on) { + ret = m5mols_sensor_power(info, true); + if (!ret) + ret = m5mols_fw_start(sd); + return ret; + } + + if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { + ret = m5mols_set_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP); + if (!ret) + ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF); + if (!ret) + ret = m5mols_busy_wait(sd, SYSTEM_STATUS, REG_AF_IDLE, + 0xff, -1); + if (ret < 0) + v4l2_warn(sd, "Soft landing lens failed\n"); + } + + ret = m5mols_sensor_power(info, false); + info->ctrl_sync = 0; + + return ret; +} + +static int m5mols_log_status(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + + v4l2_ctrl_handler_log_status(&info->handle, sd->name); + + return 0; +} + +static const struct v4l2_subdev_core_ops m5mols_core_ops = { + .s_power = m5mols_s_power, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .log_status = m5mols_log_status, +}; + +/* + * V4L2 subdev internal operations + */ +static int m5mols_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + + *format = m5mols_default_ffmt[0]; + return 0; +} + +static const struct v4l2_subdev_internal_ops m5mols_subdev_internal_ops = { + .open = m5mols_open, +}; + +static const struct v4l2_subdev_ops m5mols_ops = { + .core = &m5mols_core_ops, + .pad = &m5mols_pad_ops, + .video = &m5mols_video_ops, +}; + +static irqreturn_t m5mols_irq_handler(int irq, void *data) +{ + struct m5mols_info *info = to_m5mols(data); + + atomic_set(&info->irq_done, 1); + wake_up_interruptible(&info->irq_waitq); + + return IRQ_HANDLED; +} + +static int __devinit m5mols_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct m5mols_platform_data *pdata = client->dev.platform_data; + struct m5mols_info *info; + struct v4l2_subdev *sd; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!gpio_is_valid(pdata->gpio_reset)) { + dev_err(&client->dev, "No valid RESET GPIO specified\n"); + return -EINVAL; + } + + if (!client->irq) { + dev_err(&client->dev, "Interrupt not assigned\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(struct m5mols_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdata = pdata; + info->set_power = pdata->set_power; + + ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST"); + if (ret) { + dev_err(&client->dev, "Failed to request gpio: %d\n", ret); + goto out_free; + } + gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity); + + ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators: %d\n", ret); + goto out_gpio; + } + + sd = &info->sd; + v4l2_i2c_subdev_init(sd, client, &m5mols_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + sd->internal_ops = &m5mols_subdev_internal_ops; + info->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + if (ret < 0) + goto out_reg; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + + init_waitqueue_head(&info->irq_waitq); + ret = request_irq(client->irq, m5mols_irq_handler, + IRQF_TRIGGER_RISING, MODULE_NAME, sd); + if (ret) { + dev_err(&client->dev, "Interrupt request failed: %d\n", ret); + goto out_me; + } + info->res_type = M5MOLS_RESTYPE_MONITOR; + info->ffmt[0] = m5mols_default_ffmt[0]; + info->ffmt[1] = m5mols_default_ffmt[1]; + + ret = m5mols_sensor_power(info, true); + if (ret) + goto out_me; + + ret = m5mols_fw_start(sd); + if (!ret) + ret = m5mols_init_controls(sd); + + m5mols_sensor_power(info, false); + if (!ret) + return 0; +out_me: + media_entity_cleanup(&sd->entity); +out_reg: + regulator_bulk_free(ARRAY_SIZE(supplies), supplies); +out_gpio: + gpio_free(pdata->gpio_reset); +out_free: + kfree(info); + return ret; +} + +static int __devexit m5mols_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct m5mols_info *info = to_m5mols(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + free_irq(client->irq, sd); + + regulator_bulk_free(ARRAY_SIZE(supplies), supplies); + gpio_free(info->pdata->gpio_reset); + media_entity_cleanup(&sd->entity); + kfree(info); + return 0; +} + +static const struct i2c_device_id m5mols_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, m5mols_id); + +static struct i2c_driver m5mols_i2c_driver = { + .driver = { + .name = MODULE_NAME, + }, + .probe = m5mols_probe, + .remove = __devexit_p(m5mols_remove), + .id_table = m5mols_id, +}; + +module_i2c_driver(m5mols_i2c_driver); + +MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); +MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>"); +MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/m5mols/m5mols_reg.h b/drivers/media/i2c/m5mols/m5mols_reg.h new file mode 100644 index 000000000000..14d4be72aeff --- /dev/null +++ b/drivers/media/i2c/m5mols/m5mols_reg.h @@ -0,0 +1,362 @@ +/* + * Register map for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_REG_H +#define M5MOLS_REG_H + +#define M5MOLS_I2C_MAX_SIZE 4 +#define M5MOLS_BYTE_READ 0x01 +#define M5MOLS_BYTE_WRITE 0x02 + +#define I2C_CATEGORY(__cat) ((__cat >> 16) & 0xff) +#define I2C_COMMAND(__comm) ((__comm >> 8) & 0xff) +#define I2C_SIZE(__reg_s) ((__reg_s) & 0xff) +#define I2C_REG(__cat, __cmd, __reg_s) ((__cat << 16) | (__cmd << 8) | __reg_s) + +/* + * Category section register + * + * The category means set including relevant command of M-5MOLS. + */ +#define CAT_SYSTEM 0x00 +#define CAT_PARAM 0x01 +#define CAT_MONITOR 0x02 +#define CAT_AE 0x03 +#define CAT_WB 0x06 +#define CAT_EXIF 0x07 +#define CAT_FD 0x09 +#define CAT_LENS 0x0a +#define CAT_CAPT_PARM 0x0b +#define CAT_CAPT_CTRL 0x0c +#define CAT_FLASH 0x0f /* related to FW, revisions, booting */ + +/* + * Category 0 - SYSTEM mode + * + * The SYSTEM mode in the M-5MOLS means area available to handle with the whole + * & all-round system of sensor. It deals with version/interrupt/setting mode & + * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by + * packaging & manufacturer, even the customer and project code. And the + * function details may vary among them. The version information helps to + * determine what methods shall be used in the driver. + * + * There is many registers between customer version address and awb one. For + * more specific contents, see definition if file m5mols.h. + */ +#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, 0x00, 1) +#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, 0x01, 1) +#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, 0x02, 2) +#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, 0x04, 2) +#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, 0x06, 2) +#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, 0x08, 2) + +#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, 0x0b, 1) +#define REG_SYSINIT 0x00 /* SYSTEM mode */ +#define REG_PARAMETER 0x01 /* PARAMETER mode */ +#define REG_MONITOR 0x02 /* MONITOR mode */ +#define REG_CAPTURE 0x03 /* CAPTURE mode */ + +#define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1) +#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, 0x0a, 1) +#define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */ +#define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */ +#define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */ +/* SYSTEM mode status */ +#define SYSTEM_STATUS I2C_REG(CAT_SYSTEM, 0x0c, 1) + +/* Interrupt pending register */ +#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, 0x10, 1) +/* interrupt enable register */ +#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, 0x11, 1) +#define REG_INT_MODE (1 << 0) +#define REG_INT_AF (1 << 1) +#define REG_INT_ZOOM (1 << 2) +#define REG_INT_CAPTURE (1 << 3) +#define REG_INT_FRAMESYNC (1 << 4) +#define REG_INT_FD (1 << 5) +#define REG_INT_LENS_INIT (1 << 6) +#define REG_INT_SOUND (1 << 7) +#define REG_INT_MASK 0x0f + +/* + * category 1 - PARAMETER mode + * + * This category supports function of camera features of M-5MOLS. It means we + * can handle with preview(MONITOR) resolution size/frame per second/interface + * between the sensor and the Application Processor/even the image effect. + */ + +/* Resolution in the MONITOR mode */ +#define PARM_MON_SIZE I2C_REG(CAT_PARAM, 0x01, 1) + +/* Frame rate */ +#define PARM_MON_FPS I2C_REG(CAT_PARAM, 0x02, 1) +#define REG_FPS_30 0x02 + +/* Video bus between the sensor and a host processor */ +#define PARM_INTERFACE I2C_REG(CAT_PARAM, 0x00, 1) +#define REG_INTERFACE_MIPI 0x02 + +/* Image effects */ +#define PARM_EFFECT I2C_REG(CAT_PARAM, 0x0b, 1) +#define REG_EFFECT_OFF 0x00 +#define REG_EFFECT_NEGA 0x01 +#define REG_EFFECT_EMBOSS 0x06 +#define REG_EFFECT_OUTLINE 0x07 +#define REG_EFFECT_WATERCOLOR 0x08 + +/* + * Category 2 - MONITOR mode + * + * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another + * mode named "Preview", but this preview mode is used at the case specific + * vider-recording mode. This mmode supports only YUYV format. On the other + * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are + * another options like zoom/color effect(different with effect in PARAMETER + * mode)/anti hand shaking algorithm. + */ + +/* Target digital zoom position */ +#define MON_ZOOM I2C_REG(CAT_MONITOR, 0x01, 1) + +/* CR value for color effect */ +#define MON_CFIXR I2C_REG(CAT_MONITOR, 0x0a, 1) +/* CB value for color effect */ +#define MON_CFIXB I2C_REG(CAT_MONITOR, 0x09, 1) +#define REG_CFIXB_SEPIA 0xd8 +#define REG_CFIXR_SEPIA 0x18 + +#define MON_EFFECT I2C_REG(CAT_MONITOR, 0x0b, 1) +#define REG_COLOR_EFFECT_OFF 0x00 +#define REG_COLOR_EFFECT_ON 0x01 + +/* Chroma enable */ +#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, 0x10, 1) +/* Chroma level */ +#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, 0x0f, 1) +#define REG_CHROMA_OFF 0x00 +#define REG_CHROMA_ON 0x01 + +/* Sharpness on/off */ +#define MON_EDGE_EN I2C_REG(CAT_MONITOR, 0x12, 1) +/* Sharpness level */ +#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, 0x11, 1) +#define REG_EDGE_OFF 0x00 +#define REG_EDGE_ON 0x01 + +/* Set color tone (contrast) */ +#define MON_TONE_CTL I2C_REG(CAT_MONITOR, 0x25, 1) + +/* + * Category 3 - Auto Exposure + * + * The M-5MOLS exposure capbility is detailed as which is similar to digital + * camera. This category supports AE locking/various AE mode(range of exposure) + * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the + * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be + * different. So, this category also provide getting the max/min values. And, + * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values. + */ + +/* Auto Exposure locking */ +#define AE_LOCK I2C_REG(CAT_AE, 0x00, 1) +#define REG_AE_UNLOCK 0x00 +#define REG_AE_LOCK 0x01 + +/* Auto Exposure algorithm mode */ +#define AE_MODE I2C_REG(CAT_AE, 0x01, 1) +#define REG_AE_OFF 0x00 /* AE off */ +#define REG_AE_ALL 0x01 /* calc AE in all block integral */ +#define REG_AE_CENTER 0x03 /* calc AE in center weighted */ +#define REG_AE_SPOT 0x06 /* calc AE in specific spot */ + +#define AE_ISO I2C_REG(CAT_AE, 0x05, 1) +#define REG_ISO_AUTO 0x00 +#define REG_ISO_50 0x01 +#define REG_ISO_100 0x02 +#define REG_ISO_200 0x03 +#define REG_ISO_400 0x04 +#define REG_ISO_800 0x05 + +/* EV (scenemode) preset for MONITOR */ +#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, 0x0a, 1) +/* EV (scenemode) preset for CAPTURE */ +#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, 0x0b, 1) +#define REG_SCENE_NORMAL 0x00 +#define REG_SCENE_PORTRAIT 0x01 +#define REG_SCENE_LANDSCAPE 0x02 +#define REG_SCENE_SPORTS 0x03 +#define REG_SCENE_PARTY_INDOOR 0x04 +#define REG_SCENE_BEACH_SNOW 0x05 +#define REG_SCENE_SUNSET 0x06 +#define REG_SCENE_DAWN_DUSK 0x07 +#define REG_SCENE_FALL 0x08 +#define REG_SCENE_NIGHT 0x09 +#define REG_SCENE_AGAINST_LIGHT 0x0a +#define REG_SCENE_FIRE 0x0b +#define REG_SCENE_TEXT 0x0c +#define REG_SCENE_CANDLE 0x0d + +/* Manual gain in MONITOR mode */ +#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, 0x12, 2) +/* Maximum gain in MONITOR mode */ +#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, 0x1a, 2) +/* Manual gain in CAPTURE mode */ +#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, 0x26, 2) + +#define AE_INDEX I2C_REG(CAT_AE, 0x38, 1) +#define REG_AE_INDEX_20_NEG 0x00 +#define REG_AE_INDEX_15_NEG 0x01 +#define REG_AE_INDEX_10_NEG 0x02 +#define REG_AE_INDEX_05_NEG 0x03 +#define REG_AE_INDEX_00 0x04 +#define REG_AE_INDEX_05_POS 0x05 +#define REG_AE_INDEX_10_POS 0x06 +#define REG_AE_INDEX_15_POS 0x07 +#define REG_AE_INDEX_20_POS 0x08 + +/* + * Category 6 - White Balance + */ + +/* Auto Whitebalance locking */ +#define AWB_LOCK I2C_REG(CAT_WB, 0x00, 1) +#define REG_AWB_UNLOCK 0x00 +#define REG_AWB_LOCK 0x01 + +#define AWB_MODE I2C_REG(CAT_WB, 0x02, 1) +#define REG_AWB_AUTO 0x01 /* AWB off */ +#define REG_AWB_PRESET 0x02 /* AWB preset */ + +/* Manual WB (preset) */ +#define AWB_MANUAL I2C_REG(CAT_WB, 0x03, 1) +#define REG_AWB_INCANDESCENT 0x01 +#define REG_AWB_FLUORESCENT_1 0x02 +#define REG_AWB_FLUORESCENT_2 0x03 +#define REG_AWB_DAYLIGHT 0x04 +#define REG_AWB_CLOUDY 0x05 +#define REG_AWB_SHADE 0x06 +#define REG_AWB_HORIZON 0x07 +#define REG_AWB_LEDLIGHT 0x09 + +/* + * Category 7 - EXIF information + */ +#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, 0x00, 4) +#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, 0x04, 4) +#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, 0x08, 4) +#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, 0x0c, 4) +#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, 0x10, 4) +#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, 0x14, 4) +#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, 0x18, 4) +#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, 0x1c, 4) +#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, 0x20, 4) +#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, 0x24, 4) +#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, 0x28, 2) +#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, 0x2a, 2) +#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, 0x2c, 2) +#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, 0x2e, 2) + +/* + * Category 9 - Face Detection + */ +#define FD_CTL I2C_REG(CAT_FD, 0x00, 1) +#define BIT_FD_EN 0 +#define BIT_FD_DRAW_FACE_FRAME 4 +#define BIT_FD_DRAW_SMILE_LVL 6 +#define REG_FD(shift) (1 << shift) +#define REG_FD_OFF 0x0 + +/* + * Category A - Lens Parameter + */ +#define AF_MODE I2C_REG(CAT_LENS, 0x01, 1) +#define REG_AF_NORMAL 0x00 /* Normal AF, one time */ +#define REG_AF_MACRO 0x01 /* Macro AF, one time */ +#define REG_AF_POWEROFF 0x07 + +#define AF_EXECUTE I2C_REG(CAT_LENS, 0x02, 1) +#define REG_AF_STOP 0x00 +#define REG_AF_EXE_AUTO 0x01 +#define REG_AF_EXE_CAF 0x02 + +#define AF_STATUS I2C_REG(CAT_LENS, 0x03, 1) +#define REG_AF_FAIL 0x00 +#define REG_AF_SUCCESS 0x02 +#define REG_AF_IDLE 0x04 +#define REG_AF_BUSY 0x05 + +#define AF_VERSION I2C_REG(CAT_LENS, 0x0a, 1) + +/* + * Category B - CAPTURE Parameter + */ +#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, 0x00, 1) +#define REG_YUV422 0x00 +#define REG_BAYER10 0x05 +#define REG_BAYER8 0x06 +#define REG_JPEG 0x10 + +#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, 0x01, 1) +#define CAPP_JPEG_RATIO I2C_REG(CAT_CAPT_PARM, 0x17, 1) + +#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, 0x1d, 1) +#define REG_MCC_OFF 0x00 +#define REG_MCC_NORMAL 0x01 + +#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, 0x2c, 1) +#define REG_WDR_OFF 0x00 +#define REG_WDR_ON 0x01 +#define REG_WDR_AUTO 0x02 + +#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, 0x40, 1) +#define REG_LIGHT_OFF 0x00 +#define REG_LIGHT_ON 0x01 +#define REG_LIGHT_AUTO 0x02 + +#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, 0x41, 1) +#define REG_FLASH_OFF 0x00 +#define REG_FLASH_ON 0x01 +#define REG_FLASH_AUTO 0x02 + +/* + * Category C - CAPTURE Control + */ +#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, 0x00, 1) +#define REG_CAP_NONE 0x00 +#define REG_CAP_ANTI_SHAKE 0x02 + +/* Select single- or multi-shot capture */ +#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, 0x06, 1) + +#define CAPC_START I2C_REG(CAT_CAPT_CTRL, 0x09, 1) +#define REG_CAP_START_MAIN 0x01 +#define REG_CAP_START_THUMB 0x03 + +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, 0x0d, 4) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, 0x11, 4) + +/* + * Category F - Flash + * + * This mode provides functions about internal flash stuff and system startup. + */ + +/* Starts internal ARM core booting after power-up */ +#define FLASH_CAM_START I2C_REG(CAT_FLASH, 0x12, 1) +#define REG_START_ARM_BOOT 0x01 /* write value */ +#define REG_IN_FLASH_MODE 0x00 /* read value */ + +#endif /* M5MOLS_REG_H */ diff --git a/drivers/media/i2c/msp3400-driver.c b/drivers/media/i2c/msp3400-driver.c new file mode 100644 index 000000000000..aeb22be7dcbd --- /dev/null +++ b/drivers/media/i2c/msp3400-driver.c @@ -0,0 +1,899 @@ +/* + * Programming the mspx4xx sound processor family + * + * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org> + * + * what works and what doesn't: + * + * AM-Mono + * Support for Hauppauge cards added (decoding handled by tuner) added by + * Frederic Crozat <fcrozat@mail.dotcom.fr> + * + * FM-Mono + * should work. The stereo modes are backward compatible to FM-mono, + * therefore FM-Mono should be allways available. + * + * FM-Stereo (B/G, used in germany) + * should work, with autodetect + * + * FM-Stereo (satellite) + * should work, no autodetect (i.e. default is mono, but you can + * switch to stereo -- untested) + * + * NICAM (B/G, L , used in UK, Scandinavia, Spain and France) + * should work, with autodetect. Support for NICAM was added by + * Pekka Pietikainen <pp@netppl.fi> + * + * TODO: + * - better SAT support + * + * 980623 Thomas Sailer (sailer@ife.ee.ethz.ch) + * using soundcore instead of OSS + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/msp3400.h> +#include <media/tvaudio.h> +#include "msp3400-driver.h" + +/* ---------------------------------------------------------------------- */ + +MODULE_DESCRIPTION("device driver for msp34xx TV sound processor"); +MODULE_AUTHOR("Gerd Knorr"); +MODULE_LICENSE("GPL"); + +/* module parameters */ +static int opmode = OPMODE_AUTO; +int msp_debug; /* msp_debug output */ +bool msp_once; /* no continuous stereo monitoring */ +bool msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), + the autoscan seems work well only with FM... */ +int msp_standard = 1; /* Override auto detect of audio msp_standard, + if needed. */ +bool msp_dolby; + +int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual + (msp34xxg only) 0x00a0-0x03c0 */ + +/* read-only */ +module_param(opmode, int, 0444); + +/* read-write */ +module_param_named(once, msp_once, bool, 0644); +module_param_named(debug, msp_debug, int, 0644); +module_param_named(stereo_threshold, msp_stereo_thresh, int, 0644); +module_param_named(standard, msp_standard, int, 0644); +module_param_named(amsound, msp_amsound, bool, 0644); +module_param_named(dolby, msp_dolby, bool, 0644); + +MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect"); +MODULE_PARM_DESC(once, "No continuous stereo monitoring"); +MODULE_PARM_DESC(debug, "Enable debug messages [0-3]"); +MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo"); +MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect"); +MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan"); +MODULE_PARM_DESC(dolby, "Activates Dolby processing"); + +/* ---------------------------------------------------------------------- */ + +/* control subaddress */ +#define I2C_MSP_CONTROL 0x00 +/* demodulator unit subaddress */ +#define I2C_MSP_DEM 0x10 +/* DSP unit subaddress */ +#define I2C_MSP_DSP 0x12 + + +/* ----------------------------------------------------------------------- */ +/* functions for talking to the MSP3400C Sound processor */ + +int msp_reset(struct i2c_client *client) +{ + /* reset and read revision code */ + static u8 reset_off[3] = { I2C_MSP_CONTROL, 0x80, 0x00 }; + static u8 reset_on[3] = { I2C_MSP_CONTROL, 0x00, 0x00 }; + static u8 write[3] = { I2C_MSP_DSP + 1, 0x00, 0x1e }; + u8 read[2]; + struct i2c_msg reset[2] = { + { client->addr, I2C_M_IGNORE_NAK, 3, reset_off }, + { client->addr, I2C_M_IGNORE_NAK, 3, reset_on }, + }; + struct i2c_msg test[2] = { + { client->addr, 0, 3, write }, + { client->addr, I2C_M_RD, 2, read }, + }; + + v4l_dbg(3, msp_debug, client, "msp_reset\n"); + if (i2c_transfer(client->adapter, &reset[0], 1) != 1 || + i2c_transfer(client->adapter, &reset[1], 1) != 1 || + i2c_transfer(client->adapter, test, 2) != 2) { + v4l_err(client, "chip reset failed\n"); + return -1; + } + return 0; +} + +static int msp_read(struct i2c_client *client, int dev, int addr) +{ + int err, retval; + u8 write[3]; + u8 read[2]; + struct i2c_msg msgs[2] = { + { client->addr, 0, 3, write }, + { client->addr, I2C_M_RD, 2, read } + }; + + write[0] = dev + 1; + write[1] = addr >> 8; + write[2] = addr & 0xff; + + for (err = 0; err < 3; err++) { + if (i2c_transfer(client->adapter, msgs, 2) == 2) + break; + v4l_warn(client, "I/O error #%d (read 0x%02x/0x%02x)\n", err, + dev, addr); + schedule_timeout_interruptible(msecs_to_jiffies(10)); + } + if (err == 3) { + v4l_warn(client, "resetting chip, sound will go off.\n"); + msp_reset(client); + return -1; + } + retval = read[0] << 8 | read[1]; + v4l_dbg(3, msp_debug, client, "msp_read(0x%x, 0x%x): 0x%x\n", + dev, addr, retval); + return retval; +} + +int msp_read_dem(struct i2c_client *client, int addr) +{ + return msp_read(client, I2C_MSP_DEM, addr); +} + +int msp_read_dsp(struct i2c_client *client, int addr) +{ + return msp_read(client, I2C_MSP_DSP, addr); +} + +static int msp_write(struct i2c_client *client, int dev, int addr, int val) +{ + int err; + u8 buffer[5]; + + buffer[0] = dev; + buffer[1] = addr >> 8; + buffer[2] = addr & 0xff; + buffer[3] = val >> 8; + buffer[4] = val & 0xff; + + v4l_dbg(3, msp_debug, client, "msp_write(0x%x, 0x%x, 0x%x)\n", + dev, addr, val); + for (err = 0; err < 3; err++) { + if (i2c_master_send(client, buffer, 5) == 5) + break; + v4l_warn(client, "I/O error #%d (write 0x%02x/0x%02x)\n", err, + dev, addr); + schedule_timeout_interruptible(msecs_to_jiffies(10)); + } + if (err == 3) { + v4l_warn(client, "resetting chip, sound will go off.\n"); + msp_reset(client); + return -1; + } + return 0; +} + +int msp_write_dem(struct i2c_client *client, int addr, int val) +{ + return msp_write(client, I2C_MSP_DEM, addr, val); +} + +int msp_write_dsp(struct i2c_client *client, int addr, int val) +{ + return msp_write(client, I2C_MSP_DSP, addr, val); +} + +/* ----------------------------------------------------------------------- * + * bits 9 8 5 - SCART DSP input Select: + * 0 0 0 - SCART 1 to DSP input (reset position) + * 0 1 0 - MONO to DSP input + * 1 0 0 - SCART 2 to DSP input + * 1 1 1 - Mute DSP input + * + * bits 11 10 6 - SCART 1 Output Select: + * 0 0 0 - undefined (reset position) + * 0 1 0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS) + * 1 0 0 - MONO input to SCART 1 Output + * 1 1 0 - SCART 1 DA to SCART 1 Output + * 0 0 1 - SCART 2 DA to SCART 1 Output + * 0 1 1 - SCART 1 Input to SCART 1 Output + * 1 1 1 - Mute SCART 1 Output + * + * bits 13 12 7 - SCART 2 Output Select (for devices with 2 Output SCART): + * 0 0 0 - SCART 1 DA to SCART 2 Output (reset position) + * 0 1 0 - SCART 1 Input to SCART 2 Output + * 1 0 0 - MONO input to SCART 2 Output + * 0 0 1 - SCART 2 DA to SCART 2 Output + * 0 1 1 - SCART 2 Input to SCART 2 Output + * 1 1 0 - Mute SCART 2 Output + * + * Bits 4 to 0 should be zero. + * ----------------------------------------------------------------------- */ + +static int scarts[3][9] = { + /* MASK IN1 IN2 IN3 IN4 IN1_DA IN2_DA MONO MUTE */ + /* SCART DSP Input select */ + { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1, -1, 0x0100, 0x0320 }, + /* SCART1 Output select */ + { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 }, + /* SCART2 Output select */ + { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 }, +}; + +static char *scart_names[] = { + "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute" +}; + +void msp_set_scart(struct i2c_client *client, int in, int out) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + state->in_scart = in; + + if (in >= 0 && in <= 7 && out >= 0 && out <= 2) { + if (-1 == scarts[out][in + 1]) + return; + + state->acb &= ~scarts[out][0]; + state->acb |= scarts[out][in + 1]; + } else + state->acb = 0xf60; /* Mute Input and SCART 1 Output */ + + v4l_dbg(1, msp_debug, client, "scart switch: %s => %d (ACB=0x%04x)\n", + scart_names[in], out, state->acb); + msp_write_dsp(client, 0x13, state->acb); + + /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */ + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); +} + +/* ------------------------------------------------------------------------ */ + +static void msp_wake_thread(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (NULL == state->kthread) + return; + state->watch_stereo = 0; + state->restart = 1; + wake_up_interruptible(&state->wq); +} + +int msp_sleep(struct msp_state *state, int timeout) +{ + DECLARE_WAITQUEUE(wait, current); + + add_wait_queue(&state->wq, &wait); + if (!kthread_should_stop()) { + if (timeout < 0) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } else { + schedule_timeout_interruptible + (msecs_to_jiffies(timeout)); + } + } + + remove_wait_queue(&state->wq, &wait); + try_to_freeze(); + return state->restart; +} + +/* ------------------------------------------------------------------------ */ + +static int msp_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct msp_state *state = ctrl_to_state(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(&state->sd); + int val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: { + /* audio volume cluster */ + int reallymuted = state->muted->val | state->scan_in_progress; + + if (!reallymuted) + val = (val * 0x7f / 65535) << 8; + + v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n", + state->muted->val ? "on" : "off", + state->scan_in_progress ? "yes" : "no", + state->volume->val); + + msp_write_dsp(client, 0x0000, val); + msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1)); + if (state->has_scart2_out_volume) + msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1)); + if (state->has_headphones) + msp_write_dsp(client, 0x0006, val); + break; + } + + case V4L2_CID_AUDIO_BASS: + val = ((val - 32768) * 0x60 / 65535) << 8; + msp_write_dsp(client, 0x0002, val); + if (state->has_headphones) + msp_write_dsp(client, 0x0031, val); + break; + + case V4L2_CID_AUDIO_TREBLE: + val = ((val - 32768) * 0x60 / 65535) << 8; + msp_write_dsp(client, 0x0003, val); + if (state->has_headphones) + msp_write_dsp(client, 0x0032, val); + break; + + case V4L2_CID_AUDIO_LOUDNESS: + val = val ? ((5 * 4) << 8) : 0; + msp_write_dsp(client, 0x0004, val); + if (state->has_headphones) + msp_write_dsp(client, 0x0033, val); + break; + + case V4L2_CID_AUDIO_BALANCE: + val = (u8)((val / 256) - 128); + msp_write_dsp(client, 0x0001, val << 8); + if (state->has_headphones) + msp_write_dsp(client, 0x0030, val << 8); + break; + + default: + return -EINVAL; + } + return 0; +} + +void msp_update_volume(struct msp_state *state) +{ + /* Force an update of the volume/mute cluster */ + v4l2_ctrl_lock(state->volume); + state->volume->val = state->volume->cur.val; + state->muted->val = state->muted->cur.val; + msp_s_ctrl(state->volume); + v4l2_ctrl_unlock(state->volume); +} + +/* --- v4l2 ioctls --- */ +static int msp_s_radio(struct v4l2_subdev *sd) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio) + return 0; + state->radio = 1; + v4l_dbg(1, msp_debug, client, "switching to radio mode\n"); + state->watch_stereo = 0; + switch (state->opmode) { + case OPMODE_MANUAL: + /* set msp3400 to FM radio mode */ + msp3400c_set_mode(client, MSP_MODE_FM_RADIO); + msp3400c_set_carrier(client, MSP_CARRIER(10.7), + MSP_CARRIER(10.7)); + msp_update_volume(state); + break; + case OPMODE_AUTODETECT: + case OPMODE_AUTOSELECT: + /* the thread will do for us */ + msp_wake_thread(client); + break; + } + return 0; +} + +static int msp_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* new channel -- kick audio carrier scan */ + msp_wake_thread(client); + return 0; +} + +static int msp_querystd(struct v4l2_subdev *sd, v4l2_std_id *id) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + *id &= state->detected_std; + + v4l_dbg(2, msp_debug, client, + "detected standard: %s(0x%08Lx)\n", + msp_standard_std_name(state->std), state->detected_std); + + return 0; +} + +static int msp_s_std(struct v4l2_subdev *sd, v4l2_std_id id) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int update = state->radio || state->v4l2_std != id; + + state->v4l2_std = id; + state->radio = 0; + if (update) + msp_wake_thread(client); + return 0; +} + +static int msp_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int tuner = (input >> 3) & 1; + int sc_in = input & 0x7; + int sc1_out = output & 0xf; + int sc2_out = (output >> 4) & 0xf; + u16 val, reg; + int i; + int extern_input = 1; + + if (state->route_in == input && state->route_out == output) + return 0; + state->route_in = input; + state->route_out = output; + /* check if the tuner input is used */ + for (i = 0; i < 5; i++) { + if (((input >> (4 + i * 4)) & 0xf) == 0) + extern_input = 0; + } + state->mode = extern_input ? MSP_MODE_EXTERN : MSP_MODE_AM_DETECT; + state->rxsubchans = V4L2_TUNER_SUB_STEREO; + msp_set_scart(client, sc_in, 0); + msp_set_scart(client, sc1_out, 1); + msp_set_scart(client, sc2_out, 2); + msp_set_audmode(client); + reg = (state->opmode == OPMODE_AUTOSELECT) ? 0x30 : 0xbb; + val = msp_read_dem(client, reg); + msp_write_dem(client, reg, (val & ~0x100) | (tuner << 8)); + /* wake thread when a new input is chosen */ + msp_wake_thread(client); + return 0; +} + +static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (vt->type != V4L2_TUNER_ANALOG_TV) + return 0; + if (!state->radio) { + if (state->opmode == OPMODE_AUTOSELECT) + msp_detect_stereo(client); + vt->rxsubchans = state->rxsubchans; + } + vt->audmode = state->audmode; + vt->capability |= V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + return 0; +} + +static int msp_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (state->radio) /* TODO: add mono/stereo support for radio */ + return 0; + if (state->audmode == vt->audmode) + return 0; + state->audmode = vt->audmode; + /* only set audmode */ + msp_set_audmode(client); + return 0; +} + +static int msp_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + v4l_dbg(1, msp_debug, client, "Setting I2S speed to %d\n", freq); + + switch (freq) { + case 1024000: + state->i2s_mode = 0; + break; + case 2048000: + state->i2s_mode = 1; + break; + default: + return -EINVAL; + } + return 0; +} + +static int msp_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->ident, + (state->rev1 << 16) | state->rev2); +} + +static int msp_log_status(struct v4l2_subdev *sd) +{ + struct msp_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + const char *p; + char prefix[V4L2_SUBDEV_NAME_SIZE + 20]; + + if (state->opmode == OPMODE_AUTOSELECT) + msp_detect_stereo(client); + v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n", + client->name, state->rev1, state->rev2); + snprintf(prefix, sizeof(prefix), "%s: Audio: ", sd->name); + v4l2_ctrl_handler_log_status(&state->hdl, prefix); + switch (state->mode) { + case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break; + case MSP_MODE_FM_RADIO: p = "FM Radio"; break; + case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break; + case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break; + case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break; + case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break; + case MSP_MODE_AM_NICAM: p = "NICAM/AM (L)"; break; + case MSP_MODE_BTSC: p = "BTSC"; break; + case MSP_MODE_EXTERN: p = "External input"; break; + default: p = "unknown"; break; + } + if (state->mode == MSP_MODE_EXTERN) { + v4l_info(client, "Mode: %s\n", p); + } else if (state->opmode == OPMODE_MANUAL) { + v4l_info(client, "Mode: %s (%s%s)\n", p, + (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", + (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); + } else { + if (state->opmode == OPMODE_AUTODETECT) + v4l_info(client, "Mode: %s\n", p); + v4l_info(client, "Standard: %s (%s%s)\n", + msp_standard_std_name(state->std), + (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", + (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); + } + v4l_info(client, "Audmode: 0x%04x\n", state->audmode); + v4l_info(client, "Routing: 0x%08x (input) 0x%08x (output)\n", + state->route_in, state->route_out); + v4l_info(client, "ACB: 0x%04x\n", state->acb); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int msp_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + v4l_dbg(1, msp_debug, client, "suspend\n"); + msp_reset(client); + return 0; +} + +static int msp_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + v4l_dbg(1, msp_debug, client, "resume\n"); + msp_wake_thread(client); + return 0; +} +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops msp_ctrl_ops = { + .s_ctrl = msp_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops msp_core_ops = { + .log_status = msp_log_status, + .g_chip_ident = msp_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = msp_s_std, +}; + +static const struct v4l2_subdev_video_ops msp_video_ops = { + .querystd = msp_querystd, +}; + +static const struct v4l2_subdev_tuner_ops msp_tuner_ops = { + .s_frequency = msp_s_frequency, + .g_tuner = msp_g_tuner, + .s_tuner = msp_s_tuner, + .s_radio = msp_s_radio, +}; + +static const struct v4l2_subdev_audio_ops msp_audio_ops = { + .s_routing = msp_s_routing, + .s_i2s_clock_freq = msp_s_i2s_clock_freq, +}; + +static const struct v4l2_subdev_ops msp_ops = { + .core = &msp_core_ops, + .video = &msp_video_ops, + .tuner = &msp_tuner_ops, + .audio = &msp_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct msp_state *state; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int (*thread_func)(void *data) = NULL; + int msp_hard; + int msp_family; + int msp_revision; + int msp_product, msp_prod_hi, msp_prod_lo; + int msp_rom; + + if (!id) + strlcpy(client->name, "msp3400", sizeof(client->name)); + + if (msp_reset(client) == -1) { + v4l_dbg(1, msp_debug, client, "msp3400 not found\n"); + return -ENODEV; + } + + state = kzalloc(sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &msp_ops); + + state->v4l2_std = V4L2_STD_NTSC; + state->detected_std = V4L2_STD_ALL; + state->audmode = V4L2_TUNER_MODE_STEREO; + state->input = -1; + state->i2s_mode = 0; + init_waitqueue_head(&state->wq); + /* These are the reset input/output positions */ + state->route_in = MSP_INPUT_DEFAULT; + state->route_out = MSP_OUTPUT_DEFAULT; + + state->rev1 = msp_read_dsp(client, 0x1e); + if (state->rev1 != -1) + state->rev2 = msp_read_dsp(client, 0x1f); + v4l_dbg(1, msp_debug, client, "rev1=0x%04x, rev2=0x%04x\n", + state->rev1, state->rev2); + if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) { + v4l_dbg(1, msp_debug, client, + "not an msp3400 (cannot read chip version)\n"); + kfree(state); + return -ENODEV; + } + + msp_family = ((state->rev1 >> 4) & 0x0f) + 3; + msp_product = (state->rev2 >> 8) & 0xff; + msp_prod_hi = msp_product / 10; + msp_prod_lo = msp_product % 10; + msp_revision = (state->rev1 & 0x0f) + '@'; + msp_hard = ((state->rev1 >> 8) & 0xff) + '@'; + msp_rom = state->rev2 & 0x1f; + /* Rev B=2, C=3, D=4, G=7 */ + state->ident = msp_family * 10000 + 4000 + msp_product * 10 + + msp_revision - '@'; + + /* Has NICAM support: all mspx41x and mspx45x products have NICAM */ + state->has_nicam = + msp_prod_hi == 1 || msp_prod_hi == 5; + /* Has radio support: was added with revision G */ + state->has_radio = + msp_revision >= 'G'; + /* Has headphones output: not for stripped down products */ + state->has_headphones = + msp_prod_lo < 5; + /* Has scart2 input: not in stripped down products of the '3' family */ + state->has_scart2 = + msp_family >= 4 || msp_prod_lo < 7; + /* Has scart3 input: not in stripped down products of the '3' family */ + state->has_scart3 = + msp_family >= 4 || msp_prod_lo < 5; + /* Has scart4 input: not in pre D revisions, not in stripped D revs */ + state->has_scart4 = + msp_family >= 4 || (msp_revision >= 'D' && msp_prod_lo < 5); + /* Has scart2 output: not in stripped down products of + * the '3' family */ + state->has_scart2_out = + msp_family >= 4 || msp_prod_lo < 5; + /* Has scart2 a volume control? Not in pre-D revisions. */ + state->has_scart2_out_volume = + msp_revision > 'C' && state->has_scart2_out; + /* Has a configurable i2s out? */ + state->has_i2s_conf = + msp_revision >= 'G' && msp_prod_lo < 7; + /* Has subwoofer output: not in pre-D revs and not in stripped down + * products */ + state->has_subwoofer = + msp_revision >= 'D' && msp_prod_lo < 5; + /* Has soundprocessing (bass/treble/balance/loudness/equalizer): + * not in stripped down products */ + state->has_sound_processing = + msp_prod_lo < 7; + /* Has Virtual Dolby Surround: only in msp34x1 */ + state->has_virtual_dolby_surround = + msp_revision == 'G' && msp_prod_lo == 1; + /* Has Virtual Dolby Surround & Dolby Pro Logic: only in msp34x2 */ + state->has_dolby_pro_logic = + msp_revision == 'G' && msp_prod_lo == 2; + /* The msp343xG supports BTSC only and cannot do Automatic Standard + * Detection. */ + state->force_btsc = + msp_family == 3 && msp_revision == 'G' && msp_prod_hi == 3; + + state->opmode = opmode; + if (state->opmode == OPMODE_AUTO) { + /* MSP revision G and up have both autodetect and autoselect */ + if (msp_revision >= 'G') + state->opmode = OPMODE_AUTOSELECT; + /* MSP revision D and up have autodetect */ + else if (msp_revision >= 'D') + state->opmode = OPMODE_AUTODETECT; + else + state->opmode = OPMODE_MANUAL; + } + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 6); + if (state->has_sound_processing) { + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0); + } + state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880); + v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); + state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(state); + return err; + } + + v4l2_ctrl_cluster(2, &state->volume); + v4l2_ctrl_handler_setup(hdl); + + /* hello world :-) */ + v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n", + msp_family, msp_product, + msp_revision, msp_hard, msp_rom, + client->addr << 1, client->adapter->name); + v4l_info(client, "%s ", client->name); + if (state->has_nicam && state->has_radio) + printk(KERN_CONT "supports nicam and radio, "); + else if (state->has_nicam) + printk(KERN_CONT "supports nicam, "); + else if (state->has_radio) + printk(KERN_CONT "supports radio, "); + printk(KERN_CONT "mode is "); + + /* version-specific initialization */ + switch (state->opmode) { + case OPMODE_MANUAL: + printk(KERN_CONT "manual"); + thread_func = msp3400c_thread; + break; + case OPMODE_AUTODETECT: + printk(KERN_CONT "autodetect"); + thread_func = msp3410d_thread; + break; + case OPMODE_AUTOSELECT: + printk(KERN_CONT "autodetect and autoselect"); + thread_func = msp34xxg_thread; + break; + } + printk(KERN_CONT "\n"); + + /* startup control thread if needed */ + if (thread_func) { + state->kthread = kthread_run(thread_func, client, "msp34xx"); + + if (IS_ERR(state->kthread)) + v4l_warn(client, "kernel_thread() failed\n"); + msp_wake_thread(client); + } + return 0; +} + +static int msp_remove(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + v4l2_device_unregister_subdev(&state->sd); + /* shutdown control thread */ + if (state->kthread) { + state->restart = 1; + kthread_stop(state->kthread); + } + msp_reset(client); + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct dev_pm_ops msp3400_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(msp_suspend, msp_resume) +}; + +static const struct i2c_device_id msp_id[] = { + { "msp3400", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, msp_id); + +static struct i2c_driver msp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "msp3400", + .pm = &msp3400_pm_ops, + }, + .probe = msp_probe, + .remove = msp_remove, + .id_table = msp_id, +}; + +module_i2c_driver(msp_driver); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/i2c/msp3400-driver.h b/drivers/media/i2c/msp3400-driver.h new file mode 100644 index 000000000000..fbe5e0715f93 --- /dev/null +++ b/drivers/media/i2c/msp3400-driver.h @@ -0,0 +1,137 @@ +/* + */ + +#ifndef MSP3400_DRIVER_H +#define MSP3400_DRIVER_H + +#include <media/msp3400.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +/* ---------------------------------------------------------------------- */ + +/* This macro is allowed for *constants* only, gcc must calculate it + at compile time. Remember -- no floats in kernel mode */ +#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24))) + +#define MSP_MODE_AM_DETECT 0 +#define MSP_MODE_FM_RADIO 2 +#define MSP_MODE_FM_TERRA 3 +#define MSP_MODE_FM_SAT 4 +#define MSP_MODE_FM_NICAM1 5 +#define MSP_MODE_FM_NICAM2 6 +#define MSP_MODE_AM_NICAM 7 +#define MSP_MODE_BTSC 8 +#define MSP_MODE_EXTERN 9 + +#define SCART_IN1 0 +#define SCART_IN2 1 +#define SCART_IN3 2 +#define SCART_IN4 3 +#define SCART_IN1_DA 4 +#define SCART_IN2_DA 5 +#define SCART_MONO 6 +#define SCART_MUTE 7 + +#define SCART_DSP_IN 0 +#define SCART1_OUT 1 +#define SCART2_OUT 2 + +#define OPMODE_AUTO -1 +#define OPMODE_MANUAL 0 +#define OPMODE_AUTODETECT 1 /* use autodetect (>= msp3410 only) */ +#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */ + +/* module parameters */ +extern int msp_debug; +extern bool msp_once; +extern bool msp_amsound; +extern int msp_standard; +extern bool msp_dolby; +extern int msp_stereo_thresh; + +struct msp_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + int rev1, rev2; + int ident; + u8 has_nicam; + u8 has_radio; + u8 has_headphones; + u8 has_ntsc_jp_d_k3; + u8 has_scart2; + u8 has_scart3; + u8 has_scart4; + u8 has_scart2_out; + u8 has_scart2_out_volume; + u8 has_i2s_conf; + u8 has_subwoofer; + u8 has_sound_processing; + u8 has_virtual_dolby_surround; + u8 has_dolby_pro_logic; + u8 force_btsc; + + int radio; + int opmode; + int std; + int mode; + v4l2_std_id v4l2_std, detected_std; + int nicam_on; + int acb; + int in_scart; + int i2s_mode; + int main, second; /* sound carrier */ + int input; + u32 route_in; + u32 route_out; + + /* v4l2 */ + int audmode; + int rxsubchans; + + struct { + /* volume cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *muted; + }; + + int scan_in_progress; + + /* thread */ + struct task_struct *kthread; + wait_queue_head_t wq; + unsigned int restart:1; + unsigned int watch_stereo:1; +}; + +static inline struct msp_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct msp_state, sd); +} + +static inline struct msp_state *ctrl_to_state(struct v4l2_ctrl *ctrl) +{ + return container_of(ctrl->handler, struct msp_state, hdl); +} + +/* msp3400-driver.c */ +int msp_write_dem(struct i2c_client *client, int addr, int val); +int msp_write_dsp(struct i2c_client *client, int addr, int val); +int msp_read_dem(struct i2c_client *client, int addr); +int msp_read_dsp(struct i2c_client *client, int addr); +int msp_reset(struct i2c_client *client); +void msp_set_scart(struct i2c_client *client, int in, int out); +void msp_update_volume(struct msp_state *state); +int msp_sleep(struct msp_state *state, int timeout); + +/* msp3400-kthreads.c */ +const char *msp_standard_std_name(int std); +void msp_set_audmode(struct i2c_client *client); +int msp_detect_stereo(struct i2c_client *client); +int msp3400c_thread(void *data); +int msp3410d_thread(void *data); +int msp34xxg_thread(void *data); +void msp3400c_set_mode(struct i2c_client *client, int mode); +void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2); + +#endif /* MSP3400_DRIVER_H */ diff --git a/drivers/media/i2c/msp3400-kthreads.c b/drivers/media/i2c/msp3400-kthreads.c new file mode 100644 index 000000000000..f8b51714f2f9 --- /dev/null +++ b/drivers/media/i2c/msp3400-kthreads.c @@ -0,0 +1,1165 @@ +/* + * Programming the mspx4xx sound processor family + * + * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/freezer.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/msp3400.h> +#include <linux/kthread.h> +#include <linux/suspend.h> +#include "msp3400-driver.h" + +/* this one uses the automatic sound standard detection of newer msp34xx + chip versions */ +static struct { + int retval; + int main, second; + char *name; + v4l2_std_id std; +} msp_stdlist[] = { + { 0x0000, 0, 0, "could not detect sound standard", V4L2_STD_ALL }, + { 0x0001, 0, 0, "autodetect start", V4L2_STD_ALL }, + { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72), + "4.5/4.72 M Dual FM-Stereo", V4L2_STD_MN }, + { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875), + "5.5/5.74 B/G Dual FM-Stereo", V4L2_STD_BG }, + { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), + "6.5/6.25 D/K1 Dual FM-Stereo", V4L2_STD_DK }, + { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), + "6.5/6.74 D/K2 Dual FM-Stereo", V4L2_STD_DK }, + { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), + "6.5 D/K FM-Mono (HDEV3)", V4L2_STD_DK }, + { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), + "6.5/5.74 D/K3 Dual FM-Stereo", V4L2_STD_DK }, + { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), + "5.5/5.85 B/G NICAM FM", V4L2_STD_BG }, + { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 L NICAM AM", V4L2_STD_L }, + { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), + "6.0/6.55 I NICAM FM", V4L2_STD_PAL_I }, + { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 D/K NICAM FM", V4L2_STD_DK }, + { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 D/K NICAM FM (HDEV2)", V4L2_STD_DK }, + { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), + "6.5/5.85 D/K NICAM FM (HDEV3)", V4L2_STD_DK }, + { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), + "4.5 M BTSC-Stereo", V4L2_STD_MTS }, + { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), + "4.5 M BTSC-Mono + SAP", V4L2_STD_MTS }, + { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), + "4.5 M EIA-J Japan Stereo", V4L2_STD_NTSC_M_JP }, + { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7), + "10.7 FM-Stereo Radio", V4L2_STD_ALL }, + { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5), + "6.5 SAT-Mono", V4L2_STD_ALL }, + { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20), + "7.02/7.20 SAT-Stereo", V4L2_STD_ALL }, + { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), + "7.2 SAT ADR", V4L2_STD_ALL }, + { -1, 0, 0, NULL, 0 }, /* EOF */ +}; + +static struct msp3400c_init_data_dem { + int fir1[6]; + int fir2[6]; + int cdo1; + int cdo2; + int ad_cv; + int mode_reg; + int dsp_src; + int dsp_matrix; +} msp3400c_init_data[] = { + { /* AM (for carrier detect / msp3400) */ + {75, 19, 36, 35, 39, 40}, + {75, 19, 36, 35, 39, 40}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0500, 0x0020, 0x3000 + }, { /* AM (for carrier detect / msp3410) */ + {-1, -1, -8, 2, 59, 126}, + {-1, -1, -8, 2, 59, 126}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0100, 0x0020, 0x3000 + }, { /* FM Radio */ + {-8, -8, 4, 6, 78, 107}, + {-8, -8, 4, 6, 78, 107}, + MSP_CARRIER(10.7), MSP_CARRIER(10.7), + 0x00d0, 0x0480, 0x0020, 0x3000 + }, { /* Terrestrial FM-mono + FM-stereo */ + {3, 18, 27, 48, 66, 72}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0480, 0x0030, 0x3000 + }, { /* Sat FM-mono */ + { 1, 9, 14, 24, 33, 37}, + { 3, 18, 27, 48, 66, 72}, + MSP_CARRIER(6.5), MSP_CARRIER(6.5), + 0x00c6, 0x0480, 0x0000, 0x3000 + }, { /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */ + {-2, -8, -10, 10, 50, 86}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0040, 0x0120, 0x3000 + }, { /* NICAM/FM -- I (6.0/6.552) */ + {2, 4, -6, -4, 40, 94}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(6.0), MSP_CARRIER(6.0), + 0x00d0, 0x0040, 0x0120, 0x3000 + }, { /* NICAM/AM -- L (6.5/5.85) */ + {-2, -8, -10, 10, 50, 86}, + {-4, -12, -9, 23, 79, 126}, + MSP_CARRIER(6.5), MSP_CARRIER(6.5), + 0x00c6, 0x0140, 0x0120, 0x7c00 + }, +}; + +struct msp3400c_carrier_detect { + int cdo; + char *name; +}; + +static struct msp3400c_carrier_detect msp3400c_carrier_detect_main[] = { + /* main carrier */ + { MSP_CARRIER(4.5), "4.5 NTSC" }, + { MSP_CARRIER(5.5), "5.5 PAL B/G" }, + { MSP_CARRIER(6.0), "6.0 PAL I" }, + { MSP_CARRIER(6.5), "6.5 PAL D/K + SAT + SECAM" } +}; + +static struct msp3400c_carrier_detect msp3400c_carrier_detect_55[] = { + /* PAL B/G */ + { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" }, + { MSP_CARRIER(5.85), "5.85 PAL B/G NICAM" } +}; + +static struct msp3400c_carrier_detect msp3400c_carrier_detect_65[] = { + /* PAL SAT / SECAM */ + { MSP_CARRIER(5.85), "5.85 PAL D/K + SECAM NICAM" }, + { MSP_CARRIER(6.2578125), "6.25 PAL D/K1 FM-stereo" }, + { MSP_CARRIER(6.7421875), "6.74 PAL D/K2 FM-stereo" }, + { MSP_CARRIER(7.02), "7.02 PAL SAT FM-stereo s/b" }, + { MSP_CARRIER(7.20), "7.20 PAL SAT FM-stereo s" }, + { MSP_CARRIER(7.38), "7.38 PAL SAT FM-stereo b" }, +}; + +/* ------------------------------------------------------------------------ */ + +const char *msp_standard_std_name(int std) +{ + int i; + + for (i = 0; msp_stdlist[i].name != NULL; i++) + if (msp_stdlist[i].retval == std) + return msp_stdlist[i].name; + return "unknown"; +} + +static v4l2_std_id msp_standard_std(int std) +{ + int i; + + for (i = 0; msp_stdlist[i].name != NULL; i++) + if (msp_stdlist[i].retval == std) + return msp_stdlist[i].std; + return V4L2_STD_ALL; +} + +static void msp_set_source(struct i2c_client *client, u16 src) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (msp_dolby) { + msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */ + msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */ + } else { + msp_write_dsp(client, 0x0008, src); + msp_write_dsp(client, 0x0009, src); + } + msp_write_dsp(client, 0x000a, src); + msp_write_dsp(client, 0x000b, src); + msp_write_dsp(client, 0x000c, src); + if (state->has_scart2_out) + msp_write_dsp(client, 0x0041, src); +} + +void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2) +{ + msp_write_dem(client, 0x0093, cdo1 & 0xfff); + msp_write_dem(client, 0x009b, cdo1 >> 12); + msp_write_dem(client, 0x00a3, cdo2 & 0xfff); + msp_write_dem(client, 0x00ab, cdo2 >> 12); + msp_write_dem(client, 0x0056, 0); /* LOAD_REG_1/2 */ +} + +void msp3400c_set_mode(struct i2c_client *client, int mode) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode]; + int tuner = (state->route_in >> 3) & 1; + int i; + + v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode); + state->mode = mode; + state->rxsubchans = V4L2_TUNER_SUB_MONO; + + msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0)); + + for (i = 5; i >= 0; i--) /* fir 1 */ + msp_write_dem(client, 0x0001, data->fir1[i]); + + msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */ + msp_write_dem(client, 0x0005, 0x0040); + msp_write_dem(client, 0x0005, 0x0000); + for (i = 5; i >= 0; i--) + msp_write_dem(client, 0x0005, data->fir2[i]); + + msp_write_dem(client, 0x0083, data->mode_reg); + + msp3400c_set_carrier(client, data->cdo1, data->cdo2); + + msp_set_source(client, data->dsp_src); + /* set prescales */ + + /* volume prescale for SCART (AM mono input) */ + msp_write_dsp(client, 0x000d, 0x1900); + msp_write_dsp(client, 0x000e, data->dsp_matrix); + if (state->has_nicam) /* nicam prescale */ + msp_write_dsp(client, 0x0010, 0x5a00); +} + +/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP, + nor do they support stereo BTSC. */ +static void msp3400c_set_audmode(struct i2c_client *client) +{ + static char *strmode[] = { + "mono", "stereo", "lang2", "lang1", "lang1+lang2" + }; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + char *modestr = (state->audmode >= 0 && state->audmode < 5) ? + strmode[state->audmode] : "unknown"; + int src = 0; /* channel source: FM/AM, nicam or SCART */ + int audmode = state->audmode; + + if (state->opmode == OPMODE_AUTOSELECT) { + /* this method would break everything, let's make sure + * it's never called + */ + v4l_dbg(1, msp_debug, client, + "set_audmode called with mode=%d instead of set_source (ignored)\n", + state->audmode); + return; + } + + /* Note: for the C and D revs no NTSC stereo + SAP is possible as + the hardware does not support SAP. So the rxsubchans combination + of STEREO | LANG2 does not occur. */ + + if (state->mode != MSP_MODE_EXTERN) { + /* switch to mono if only mono is available */ + if (state->rxsubchans == V4L2_TUNER_SUB_MONO) + audmode = V4L2_TUNER_MODE_MONO; + /* if bilingual */ + else if (state->rxsubchans & V4L2_TUNER_SUB_LANG2) { + /* and mono or stereo, then fallback to lang1 */ + if (audmode == V4L2_TUNER_MODE_MONO || + audmode == V4L2_TUNER_MODE_STEREO) + audmode = V4L2_TUNER_MODE_LANG1; + } + /* if stereo, and audmode is not mono, then switch to stereo */ + else if (audmode != V4L2_TUNER_MODE_MONO) + audmode = V4L2_TUNER_MODE_STEREO; + } + + /* switch demodulator */ + switch (state->mode) { + case MSP_MODE_FM_TERRA: + v4l_dbg(1, msp_debug, client, "FM set_audmode: %s\n", modestr); + switch (audmode) { + case V4L2_TUNER_MODE_STEREO: + msp_write_dsp(client, 0x000e, 0x3001); + break; + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + case V4L2_TUNER_MODE_LANG2: + case V4L2_TUNER_MODE_LANG1_LANG2: + msp_write_dsp(client, 0x000e, 0x3000); + break; + } + break; + case MSP_MODE_FM_SAT: + v4l_dbg(1, msp_debug, client, "SAT set_audmode: %s\n", modestr); + switch (audmode) { + case V4L2_TUNER_MODE_MONO: + msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5)); + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02)); + break; + case V4L2_TUNER_MODE_LANG1: + msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); + break; + case V4L2_TUNER_MODE_LANG2: + msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); + break; + } + break; + case MSP_MODE_FM_NICAM1: + case MSP_MODE_FM_NICAM2: + case MSP_MODE_AM_NICAM: + v4l_dbg(1, msp_debug, client, + "NICAM set_audmode: %s\n", modestr); + if (state->nicam_on) + src = 0x0100; /* NICAM */ + break; + case MSP_MODE_BTSC: + v4l_dbg(1, msp_debug, client, + "BTSC set_audmode: %s\n", modestr); + break; + case MSP_MODE_EXTERN: + v4l_dbg(1, msp_debug, client, + "extern set_audmode: %s\n", modestr); + src = 0x0200; /* SCART */ + break; + case MSP_MODE_FM_RADIO: + v4l_dbg(1, msp_debug, client, + "FM-Radio set_audmode: %s\n", modestr); + break; + default: + v4l_dbg(1, msp_debug, client, "mono set_audmode\n"); + return; + } + + /* switch audio */ + v4l_dbg(1, msp_debug, client, "set audmode %d\n", audmode); + switch (audmode) { + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + src |= 0x0020; + break; + case V4L2_TUNER_MODE_MONO: + if (state->mode == MSP_MODE_AM_NICAM) { + v4l_dbg(1, msp_debug, client, "switching to AM mono\n"); + /* AM mono decoding is handled by tuner, not MSP chip */ + /* SCART switching control register */ + msp_set_scart(client, SCART_MONO, 0); + src = 0x0200; + break; + } + if (state->rxsubchans & V4L2_TUNER_SUB_STEREO) + src = 0x0030; + break; + case V4L2_TUNER_MODE_LANG1: + break; + case V4L2_TUNER_MODE_LANG2: + src |= 0x0010; + break; + } + v4l_dbg(1, msp_debug, client, + "set_audmode final source/matrix = 0x%x\n", src); + + msp_set_source(client, src); +} + +static void msp3400c_print_mode(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (state->main == state->second) + v4l_dbg(1, msp_debug, client, + "mono sound carrier: %d.%03d MHz\n", + state->main / 910000, (state->main / 910) % 1000); + else + v4l_dbg(1, msp_debug, client, + "main sound carrier: %d.%03d MHz\n", + state->main / 910000, (state->main / 910) % 1000); + if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2) + v4l_dbg(1, msp_debug, client, + "NICAM/FM carrier : %d.%03d MHz\n", + state->second / 910000, (state->second/910) % 1000); + if (state->mode == MSP_MODE_AM_NICAM) + v4l_dbg(1, msp_debug, client, + "NICAM/AM carrier : %d.%03d MHz\n", + state->second / 910000, (state->second / 910) % 1000); + if (state->mode == MSP_MODE_FM_TERRA && state->main != state->second) { + v4l_dbg(1, msp_debug, client, + "FM-stereo carrier : %d.%03d MHz\n", + state->second / 910000, (state->second / 910) % 1000); + } +} + +/* ----------------------------------------------------------------------- */ + +static int msp3400c_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int val; + int rxsubchans = state->rxsubchans; + int newnicam = state->nicam_on; + int update = 0; + + switch (state->mode) { + case MSP_MODE_FM_TERRA: + val = msp_read_dsp(client, 0x18); + if (val > 32767) + val -= 65536; + v4l_dbg(2, msp_debug, client, + "stereo detect register: %d\n", val); + if (val > 8192) { + rxsubchans = V4L2_TUNER_SUB_STEREO; + } else if (val < -4096) { + rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } else { + rxsubchans = V4L2_TUNER_SUB_MONO; + } + newnicam = 0; + break; + case MSP_MODE_FM_NICAM1: + case MSP_MODE_FM_NICAM2: + case MSP_MODE_AM_NICAM: + val = msp_read_dem(client, 0x23); + v4l_dbg(2, msp_debug, client, "nicam sync=%d, mode=%d\n", + val & 1, (val & 0x1e) >> 1); + + if (val & 1) { + /* nicam synced */ + switch ((val & 0x1e) >> 1) { + case 0: + case 8: + rxsubchans = V4L2_TUNER_SUB_STEREO; + break; + case 1: + case 9: + rxsubchans = V4L2_TUNER_SUB_MONO; + break; + case 2: + case 10: + rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + default: + rxsubchans = V4L2_TUNER_SUB_MONO; + break; + } + newnicam = 1; + } else { + newnicam = 0; + rxsubchans = V4L2_TUNER_SUB_MONO; + } + break; + } + if (rxsubchans != state->rxsubchans) { + update = 1; + v4l_dbg(1, msp_debug, client, + "watch: rxsubchans %02x => %02x\n", + state->rxsubchans, rxsubchans); + state->rxsubchans = rxsubchans; + } + if (newnicam != state->nicam_on) { + update = 1; + v4l_dbg(1, msp_debug, client, "watch: nicam %d => %d\n", + state->nicam_on, newnicam); + state->nicam_on = newnicam; + } + return update; +} + +/* + * A kernel thread for msp3400 control -- we don't want to block the + * in the ioctl while doing the sound carrier & stereo detect + */ +/* stereo/multilang monitoring */ +static void watch_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (msp_detect_stereo(client)) + msp_set_audmode(client); + + if (msp_once) + state->watch_stereo = 0; +} + +int msp3400c_thread(void *data) +{ + struct i2c_client *client = data; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + struct msp3400c_carrier_detect *cd; + int count, max1, max2, val1, val2, val, i; + + v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n"); + state->detected_std = V4L2_STD_ALL; + set_freezable(); + for (;;) { + v4l_dbg(2, msp_debug, client, "msp3400 thread: sleep\n"); + msp_sleep(state, -1); + v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n"); + +restart: + v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); + state->restart = 0; + if (kthread_should_stop()) + break; + + if (state->radio || MSP_MODE_EXTERN == state->mode) { + /* no carrier scan, just unmute */ + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); + state->scan_in_progress = 0; + msp_update_volume(state); + continue; + } + + /* mute audio */ + state->scan_in_progress = 1; + msp_update_volume(state); + + msp3400c_set_mode(client, MSP_MODE_AM_DETECT); + val1 = val2 = 0; + max1 = max2 = -1; + state->watch_stereo = 0; + state->nicam_on = 0; + + /* wait for tuner to settle down after a channel change */ + if (msp_sleep(state, 200)) + goto restart; + + /* carrier detect pass #1 -- main carrier */ + cd = msp3400c_carrier_detect_main; + count = ARRAY_SIZE(msp3400c_carrier_detect_main); + + if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) { + /* autodetect doesn't work well with AM ... */ + max1 = 3; + count = 0; + v4l_dbg(1, msp_debug, client, "AM sound override\n"); + } + + for (i = 0; i < count; i++) { + msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo); + if (msp_sleep(state, 100)) + goto restart; + val = msp_read_dsp(client, 0x1b); + if (val > 32767) + val -= 65536; + if (val1 < val) + val1 = val, max1 = i; + v4l_dbg(1, msp_debug, client, + "carrier1 val: %5d / %s\n", val, cd[i].name); + } + + /* carrier detect pass #2 -- second (stereo) carrier */ + switch (max1) { + case 1: /* 5.5 */ + cd = msp3400c_carrier_detect_55; + count = ARRAY_SIZE(msp3400c_carrier_detect_55); + break; + case 3: /* 6.5 */ + cd = msp3400c_carrier_detect_65; + count = ARRAY_SIZE(msp3400c_carrier_detect_65); + break; + case 0: /* 4.5 */ + case 2: /* 6.0 */ + default: + cd = NULL; + count = 0; + break; + } + + if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) { + /* autodetect doesn't work well with AM ... */ + cd = NULL; + count = 0; + max2 = 0; + } + for (i = 0; i < count; i++) { + msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo); + if (msp_sleep(state, 100)) + goto restart; + val = msp_read_dsp(client, 0x1b); + if (val > 32767) + val -= 65536; + if (val2 < val) + val2 = val, max2 = i; + v4l_dbg(1, msp_debug, client, + "carrier2 val: %5d / %s\n", val, cd[i].name); + } + + /* program the msp3400 according to the results */ + state->main = msp3400c_carrier_detect_main[max1].cdo; + switch (max1) { + case 1: /* 5.5 */ + state->detected_std = V4L2_STD_BG | V4L2_STD_PAL_H; + if (max2 == 0) { + /* B/G FM-stereo */ + state->second = msp3400c_carrier_detect_55[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + state->watch_stereo = 1; + } else if (max2 == 1 && state->has_nicam) { + /* B/G NICAM */ + state->second = msp3400c_carrier_detect_55[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_NICAM1); + state->nicam_on = 1; + state->watch_stereo = 1; + } else { + goto no_second; + } + break; + case 2: /* 6.0 */ + /* PAL I NICAM */ + state->detected_std = V4L2_STD_PAL_I; + state->second = MSP_CARRIER(6.552); + msp3400c_set_mode(client, MSP_MODE_FM_NICAM2); + state->nicam_on = 1; + state->watch_stereo = 1; + break; + case 3: /* 6.5 */ + if (max2 == 1 || max2 == 2) { + /* D/K FM-stereo */ + state->second = msp3400c_carrier_detect_65[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + state->watch_stereo = 1; + state->detected_std = V4L2_STD_DK; + } else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) { + /* L NICAM or AM-mono */ + state->second = msp3400c_carrier_detect_65[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_AM_NICAM); + state->watch_stereo = 1; + state->detected_std = V4L2_STD_L; + } else if (max2 == 0 && state->has_nicam) { + /* D/K NICAM */ + state->second = msp3400c_carrier_detect_65[max2].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_NICAM1); + state->nicam_on = 1; + state->watch_stereo = 1; + state->detected_std = V4L2_STD_DK; + } else { + goto no_second; + } + break; + case 0: /* 4.5 */ + state->detected_std = V4L2_STD_MN; + default: +no_second: + state->second = msp3400c_carrier_detect_main[max1].cdo; + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + break; + } + msp3400c_set_carrier(client, state->second, state->main); + + /* unmute */ + state->scan_in_progress = 0; + msp3400c_set_audmode(client); + msp_update_volume(state); + + if (msp_debug) + msp3400c_print_mode(client); + + /* monitor tv audio mode, the first time don't wait + so long to get a quick stereo/bilingual result */ + count = 3; + while (state->watch_stereo) { + if (msp_sleep(state, count ? 1000 : 5000)) + goto restart; + if (count) + count--; + watch_stereo(client); + } + } + v4l_dbg(1, msp_debug, client, "thread: exit\n"); + return 0; +} + + +int msp3410d_thread(void *data) +{ + struct i2c_client *client = data; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int val, i, std, count; + + v4l_dbg(1, msp_debug, client, "msp3410 daemon started\n"); + state->detected_std = V4L2_STD_ALL; + set_freezable(); + for (;;) { + v4l_dbg(2, msp_debug, client, "msp3410 thread: sleep\n"); + msp_sleep(state, -1); + v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n"); + +restart: + v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); + state->restart = 0; + if (kthread_should_stop()) + break; + + if (state->mode == MSP_MODE_EXTERN) { + /* no carrier scan needed, just unmute */ + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); + state->scan_in_progress = 0; + msp_update_volume(state); + continue; + } + + /* mute audio */ + state->scan_in_progress = 1; + msp_update_volume(state); + + /* start autodetect. Note: autodetect is not supported for + NTSC-M and radio, hence we force the standard in those + cases. */ + if (state->radio) + std = 0x40; + else + std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1; + state->watch_stereo = 0; + state->nicam_on = 0; + + /* wait for tuner to settle down after a channel change */ + if (msp_sleep(state, 200)) + goto restart; + + if (msp_debug) + v4l_dbg(2, msp_debug, client, + "setting standard: %s (0x%04x)\n", + msp_standard_std_name(std), std); + + if (std != 1) { + /* programmed some specific mode */ + val = std; + } else { + /* triggered autodetect */ + msp_write_dem(client, 0x20, std); + for (;;) { + if (msp_sleep(state, 100)) + goto restart; + + /* check results */ + val = msp_read_dem(client, 0x7e); + if (val < 0x07ff) + break; + v4l_dbg(2, msp_debug, client, + "detection still in progress\n"); + } + } + for (i = 0; msp_stdlist[i].name != NULL; i++) + if (msp_stdlist[i].retval == val) + break; + v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n", + msp_standard_std_name(val), val); + state->main = msp_stdlist[i].main; + state->second = msp_stdlist[i].second; + state->std = val; + state->rxsubchans = V4L2_TUNER_SUB_MONO; + + if (msp_amsound && !state->radio && + (state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) { + /* autodetection has failed, let backup */ + v4l_dbg(1, msp_debug, client, "autodetection failed," + " switching to backup standard: %s (0x%04x)\n", + msp_stdlist[8].name ? + msp_stdlist[8].name : "unknown", val); + state->std = val = 0x0009; + msp_write_dem(client, 0x20, val); + } else { + state->detected_std = msp_standard_std(state->std); + } + + /* set stereo */ + switch (val) { + case 0x0008: /* B/G NICAM */ + case 0x000a: /* I NICAM */ + case 0x000b: /* D/K NICAM */ + if (val == 0x000a) + state->mode = MSP_MODE_FM_NICAM2; + else + state->mode = MSP_MODE_FM_NICAM1; + /* just turn on stereo */ + state->nicam_on = 1; + state->watch_stereo = 1; + break; + case 0x0009: + state->mode = MSP_MODE_AM_NICAM; + state->nicam_on = 1; + state->watch_stereo = 1; + break; + case 0x0020: /* BTSC */ + /* The pre-'G' models only have BTSC-mono */ + state->mode = MSP_MODE_BTSC; + break; + case 0x0040: /* FM radio */ + state->mode = MSP_MODE_FM_RADIO; + state->rxsubchans = V4L2_TUNER_SUB_STEREO; + /* not needed in theory if we have radio, but + short programming enables carrier mute */ + msp3400c_set_mode(client, MSP_MODE_FM_RADIO); + msp3400c_set_carrier(client, MSP_CARRIER(10.7), + MSP_CARRIER(10.7)); + break; + case 0x0002: + case 0x0003: + case 0x0004: + case 0x0005: + state->mode = MSP_MODE_FM_TERRA; + state->watch_stereo = 1; + break; + } + + /* set various prescales */ + msp_write_dsp(client, 0x0d, 0x1900); /* scart */ + msp_write_dsp(client, 0x0e, 0x3000); /* FM */ + if (state->has_nicam) + msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ + + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); + + /* unmute */ + msp3400c_set_audmode(client); + state->scan_in_progress = 0; + msp_update_volume(state); + + /* monitor tv audio mode, the first time don't wait + so long to get a quick stereo/bilingual result */ + count = 3; + while (state->watch_stereo) { + if (msp_sleep(state, count ? 1000 : 5000)) + goto restart; + if (count) + count--; + watch_stereo(client); + } + } + v4l_dbg(1, msp_debug, client, "thread: exit\n"); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* msp34xxG + (autoselect no-thread) + * this one uses both automatic standard detection and automatic sound + * select which are available in the newer G versions + * struct msp: only norm, acb and source are really used in this mode + */ + +static int msp34xxg_modus(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (state->radio) { + v4l_dbg(1, msp_debug, client, "selected radio modus\n"); + return 0x0001; + } + if (state->v4l2_std == V4L2_STD_NTSC_M_JP) { + v4l_dbg(1, msp_debug, client, "selected M (EIA-J) modus\n"); + return 0x4001; + } + if (state->v4l2_std == V4L2_STD_NTSC_M_KR) { + v4l_dbg(1, msp_debug, client, "selected M (A2) modus\n"); + return 0x0001; + } + if (state->v4l2_std == V4L2_STD_SECAM_L) { + v4l_dbg(1, msp_debug, client, "selected SECAM-L modus\n"); + return 0x6001; + } + if (state->v4l2_std & V4L2_STD_MN) { + v4l_dbg(1, msp_debug, client, "selected M (BTSC) modus\n"); + return 0x2001; + } + return 0x7001; +} + +static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) + { + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int source, matrix; + + switch (state->audmode) { + case V4L2_TUNER_MODE_MONO: + source = 0; /* mono only */ + matrix = 0x30; + break; + case V4L2_TUNER_MODE_LANG2: + source = 4; /* stereo or B */ + matrix = 0x10; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + source = 1; /* stereo or A|B */ + matrix = 0x20; + break; + case V4L2_TUNER_MODE_LANG1: + source = 3; /* stereo or A */ + matrix = 0x00; + break; + case V4L2_TUNER_MODE_STEREO: + default: + source = 3; /* stereo or A */ + matrix = 0x20; + break; + } + + if (in == MSP_DSP_IN_TUNER) + source = (source << 8) | 0x20; + /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14 + instead of 11, 12, 13. So we add one for that msp version. */ + else if (in >= MSP_DSP_IN_MAIN_AVC && state->has_dolby_pro_logic) + source = ((in + 1) << 8) | matrix; + else + source = (in << 8) | matrix; + + v4l_dbg(1, msp_debug, client, + "set source to %d (0x%x) for output %02x\n", in, source, reg); + msp_write_dsp(client, reg, source); +} + +static void msp34xxg_set_sources(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + u32 in = state->route_in; + + msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf); + /* quasi-peak detector is set to same input as the loudspeaker (MAIN) */ + msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf); + msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf); + msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf); + if (state->has_scart2_out) + msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf); + msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf); +} + +/* (re-)initialize the msp34xxg */ +static void msp34xxg_reset(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int tuner = (state->route_in >> 3) & 1; + int modus; + + /* initialize std to 1 (autodetect) to signal that no standard is + selected yet. */ + state->std = 1; + + msp_reset(client); + + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); + + /* step-by-step initialisation, as described in the manual */ + modus = msp34xxg_modus(client); + modus |= tuner ? 0x100 : 0; + msp_write_dem(client, 0x30, modus); + + /* write the dsps that may have an influence on + standard/audio autodetection right now */ + msp34xxg_set_sources(client); + + msp_write_dsp(client, 0x0d, 0x1900); /* scart */ + msp_write_dsp(client, 0x0e, 0x3000); /* FM */ + if (state->has_nicam) + msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ + + /* set identification threshold. Personally, I + * I set it to a higher value than the default + * of 0x190 to ignore noisy stereo signals. + * this needs tuning. (recommended range 0x00a0-0x03c0) + * 0x7f0 = forced mono mode + * + * a2 threshold for stereo/bilingual. + * Note: this register is part of the Manual/Compatibility mode. + * It is supported by all 'G'-family chips. + */ + msp_write_dem(client, 0x22, msp_stereo_thresh); +} + +int msp34xxg_thread(void *data) +{ + struct i2c_client *client = data; + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int val, i; + + v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n"); + state->detected_std = V4L2_STD_ALL; + set_freezable(); + for (;;) { + v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n"); + msp_sleep(state, -1); + v4l_dbg(2, msp_debug, client, "msp34xxg thread: wakeup\n"); + +restart: + v4l_dbg(1, msp_debug, client, "thread: restart scan\n"); + state->restart = 0; + if (kthread_should_stop()) + break; + + if (state->mode == MSP_MODE_EXTERN) { + /* no carrier scan needed, just unmute */ + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); + state->scan_in_progress = 0; + msp_update_volume(state); + continue; + } + + /* setup the chip*/ + msp34xxg_reset(client); + state->std = state->radio ? 0x40 : + (state->force_btsc && msp_standard == 1) ? 32 : msp_standard; + msp_write_dem(client, 0x20, state->std); + /* start autodetect */ + if (state->std != 1) + goto unmute; + + /* watch autodetect */ + v4l_dbg(1, msp_debug, client, + "started autodetect, waiting for result\n"); + for (i = 0; i < 10; i++) { + if (msp_sleep(state, 100)) + goto restart; + + /* check results */ + val = msp_read_dem(client, 0x7e); + if (val < 0x07ff) { + state->std = val; + break; + } + v4l_dbg(2, msp_debug, client, + "detection still in progress\n"); + } + if (state->std == 1) { + v4l_dbg(1, msp_debug, client, + "detection still in progress after 10 tries. giving up.\n"); + continue; + } + +unmute: + v4l_dbg(1, msp_debug, client, + "detected standard: %s (0x%04x)\n", + msp_standard_std_name(state->std), state->std); + state->detected_std = msp_standard_std(state->std); + + if (state->std == 9) { + /* AM NICAM mode */ + msp_write_dsp(client, 0x0e, 0x7c00); + } + + /* unmute: dispatch sound to scart output, set scart volume */ + msp_update_volume(state); + + /* restore ACB */ + if (msp_write_dsp(client, 0x13, state->acb)) + return -1; + + /* the periodic stereo/SAP check is only relevant for + the 0x20 standard (BTSC) */ + if (state->std != 0x20) + continue; + + state->watch_stereo = 1; + + /* monitor tv audio mode, the first time don't wait + in order to get a quick stereo/SAP update */ + watch_stereo(client); + while (state->watch_stereo) { + watch_stereo(client); + if (msp_sleep(state, 5000)) + goto restart; + } + } + v4l_dbg(1, msp_debug, client, "thread: exit\n"); + return 0; +} + +static int msp34xxg_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + int status = msp_read_dem(client, 0x0200); + int is_bilingual = status & 0x100; + int is_stereo = status & 0x40; + int oldrx = state->rxsubchans; + + if (state->mode == MSP_MODE_EXTERN) + return 0; + + state->rxsubchans = 0; + if (is_stereo) + state->rxsubchans = V4L2_TUNER_SUB_STEREO; + else + state->rxsubchans = V4L2_TUNER_SUB_MONO; + if (is_bilingual) { + if (state->std == 0x20) + state->rxsubchans |= V4L2_TUNER_SUB_SAP; + else + state->rxsubchans = + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } + v4l_dbg(1, msp_debug, client, + "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", + status, is_stereo, is_bilingual, state->rxsubchans); + return (oldrx != state->rxsubchans); +} + +static void msp34xxg_set_audmode(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + if (state->std == 0x20) { + if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) && + (state->audmode == V4L2_TUNER_MODE_LANG1_LANG2 || + state->audmode == V4L2_TUNER_MODE_LANG2)) { + msp_write_dem(client, 0x20, 0x21); + } else { + msp_write_dem(client, 0x20, 0x20); + } + } + + msp34xxg_set_sources(client); +} + +void msp_set_audmode(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + switch (state->opmode) { + case OPMODE_MANUAL: + case OPMODE_AUTODETECT: + msp3400c_set_audmode(client); + break; + case OPMODE_AUTOSELECT: + msp34xxg_set_audmode(client); + break; + } +} + +int msp_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = to_state(i2c_get_clientdata(client)); + + switch (state->opmode) { + case OPMODE_MANUAL: + case OPMODE_AUTODETECT: + return msp3400c_detect_stereo(client); + case OPMODE_AUTOSELECT: + return msp34xxg_detect_stereo(client); + } + return 0; +} + diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c new file mode 100644 index 000000000000..445359c96113 --- /dev/null +++ b/drivers/media/i2c/mt9m032.c @@ -0,0 +1,878 @@ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/v4l2-mediabus.h> + +#include <media/media-entity.h> +#include <media/mt9m032.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#include "aptina-pll.h" + +/* + * width and height include active boundary and black parts + * + * column 0- 15 active boundary + * column 16-1455 image + * column 1456-1471 active boundary + * column 1472-1599 black + * + * row 0- 51 black + * row 53- 59 active boundary + * row 60-1139 image + * row 1140-1147 active boundary + * row 1148-1151 black + */ + +#define MT9M032_PIXEL_ARRAY_WIDTH 1600 +#define MT9M032_PIXEL_ARRAY_HEIGHT 1152 + +#define MT9M032_CHIP_VERSION 0x00 +#define MT9M032_CHIP_VERSION_VALUE 0x1402 +#define MT9M032_ROW_START 0x01 +#define MT9M032_ROW_START_MIN 0 +#define MT9M032_ROW_START_MAX 1152 +#define MT9M032_ROW_START_DEF 60 +#define MT9M032_COLUMN_START 0x02 +#define MT9M032_COLUMN_START_MIN 0 +#define MT9M032_COLUMN_START_MAX 1600 +#define MT9M032_COLUMN_START_DEF 16 +#define MT9M032_ROW_SIZE 0x03 +#define MT9M032_ROW_SIZE_MIN 32 +#define MT9M032_ROW_SIZE_MAX 1152 +#define MT9M032_ROW_SIZE_DEF 1080 +#define MT9M032_COLUMN_SIZE 0x04 +#define MT9M032_COLUMN_SIZE_MIN 32 +#define MT9M032_COLUMN_SIZE_MAX 1600 +#define MT9M032_COLUMN_SIZE_DEF 1440 +#define MT9M032_HBLANK 0x05 +#define MT9M032_VBLANK 0x06 +#define MT9M032_VBLANK_MAX 0x7ff +#define MT9M032_SHUTTER_WIDTH_HIGH 0x08 +#define MT9M032_SHUTTER_WIDTH_LOW 0x09 +#define MT9M032_SHUTTER_WIDTH_MIN 1 +#define MT9M032_SHUTTER_WIDTH_MAX 1048575 +#define MT9M032_SHUTTER_WIDTH_DEF 1943 +#define MT9M032_PIX_CLK_CTRL 0x0a +#define MT9M032_PIX_CLK_CTRL_INV_PIXCLK 0x8000 +#define MT9M032_RESTART 0x0b +#define MT9M032_RESET 0x0d +#define MT9M032_PLL_CONFIG1 0x11 +#define MT9M032_PLL_CONFIG1_OUTDIV_MASK 0x3f +#define MT9M032_PLL_CONFIG1_MUL_SHIFT 8 +#define MT9M032_READ_MODE1 0x1e +#define MT9M032_READ_MODE2 0x20 +#define MT9M032_READ_MODE2_VFLIP_SHIFT 15 +#define MT9M032_READ_MODE2_HFLIP_SHIFT 14 +#define MT9M032_READ_MODE2_ROW_BLC 0x40 +#define MT9M032_GAIN_GREEN1 0x2b +#define MT9M032_GAIN_BLUE 0x2c +#define MT9M032_GAIN_RED 0x2d +#define MT9M032_GAIN_GREEN2 0x2e + +/* write only */ +#define MT9M032_GAIN_ALL 0x35 +#define MT9M032_GAIN_DIGITAL_MASK 0x7f +#define MT9M032_GAIN_DIGITAL_SHIFT 8 +#define MT9M032_GAIN_AMUL_SHIFT 6 +#define MT9M032_GAIN_ANALOG_MASK 0x3f +#define MT9M032_FORMATTER1 0x9e +#define MT9M032_FORMATTER2 0x9f +#define MT9M032_FORMATTER2_DOUT_EN 0x1000 +#define MT9M032_FORMATTER2_PIXCLK_EN 0x2000 + +/* + * The available MT9M032 datasheet is missing documentation for register 0x10 + * MT9P031 seems to be close enough, so use constants from that datasheet for + * now. + * But keep the name MT9P031 to remind us, that this isn't really confirmed + * for this sensor. + */ +#define MT9P031_PLL_CONTROL 0x10 +#define MT9P031_PLL_CONTROL_PWROFF 0x0050 +#define MT9P031_PLL_CONTROL_PWRON 0x0051 +#define MT9P031_PLL_CONTROL_USEPLL 0x0052 +#define MT9P031_PLL_CONFIG2 0x11 +#define MT9P031_PLL_CONFIG2_P1_DIV_MASK 0x1f + +struct mt9m032 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct mt9m032_platform_data *pdata; + + unsigned int pix_clock; + + struct v4l2_ctrl_handler ctrls; + struct { + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + }; + + struct mutex lock; /* Protects streaming, format, interval and crop */ + + bool streaming; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + struct v4l2_fract frame_interval; +}; + +#define to_mt9m032(sd) container_of(sd, struct mt9m032, subdev) +#define to_dev(sensor) \ + (&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev) + +static int mt9m032_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width) +{ + unsigned int effective_width; + u32 ns; + + effective_width = width + 716; /* empirical value */ + ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock); + dev_dbg(to_dev(sensor), "MT9M032 line time: %u ns\n", ns); + return ns; +} + +static int mt9m032_update_timing(struct mt9m032 *sensor, + struct v4l2_fract *interval) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct v4l2_rect *crop = &sensor->crop; + unsigned int min_vblank; + unsigned int vblank; + u32 row_time; + + if (!interval) + interval = &sensor->frame_interval; + + row_time = mt9m032_row_time(sensor, crop->width); + + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + + if (vblank > MT9M032_VBLANK_MAX) { + /* hardware limits to 11 bit values */ + interval->denominator = 1000; + interval->numerator = + div_u64((crop->height + MT9M032_VBLANK_MAX) * + (u64)row_time * interval->denominator, + 1000000000ULL); + vblank = div_u64(1000000000ULL * interval->numerator, + (u64)row_time * interval->denominator) + - crop->height; + } + /* enforce minimal 1.6ms blanking time. */ + min_vblank = 1600000 / row_time; + vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX); + + return mt9m032_write(client, MT9M032_VBLANK, vblank); +} + +static int mt9m032_update_geom_timing(struct mt9m032 *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + ret = mt9m032_write(client, MT9M032_COLUMN_SIZE, + sensor->crop.width - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_SIZE, + sensor->crop.height - 1); + if (!ret) + ret = mt9m032_write(client, MT9M032_COLUMN_START, + sensor->crop.left); + if (!ret) + ret = mt9m032_write(client, MT9M032_ROW_START, + sensor->crop.top); + if (!ret) + ret = mt9m032_update_timing(sensor, NULL); + return ret; +} + +static int update_formatter2(struct mt9m032 *sensor, bool streaming) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + u16 reg_val = MT9M032_FORMATTER2_DOUT_EN + | 0x0070; /* parts reserved! */ + /* possibly for changing to 14-bit mode */ + + if (streaming) + reg_val |= MT9M032_FORMATTER2_PIXCLK_EN; /* pixclock enable */ + + return mt9m032_write(client, MT9M032_FORMATTER2, reg_val); +} + +static int mt9m032_setup_pll(struct mt9m032 *sensor) +{ + static const struct aptina_pll_limits limits = { + .ext_clock_min = 8000000, + .ext_clock_max = 16500000, + .int_clock_min = 2000000, + .int_clock_max = 24000000, + .out_clock_min = 322000000, + .out_clock_max = 693000000, + .pix_clock_max = 99000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + struct mt9m032_platform_data *pdata = sensor->pdata; + struct aptina_pll pll; + int ret; + + pll.ext_clock = pdata->ext_clock; + pll.pix_clock = pdata->pix_clock; + + ret = aptina_pll_calculate(&client->dev, &limits, &pll); + if (ret < 0) + return ret; + + sensor->pix_clock = pdata->pix_clock; + + ret = mt9m032_write(client, MT9M032_PLL_CONFIG1, + (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT) + | (pll.p1 - 1)); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONFIG2, pll.n - 1); + if (!ret) + ret = mt9m032_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON | + MT9P031_PLL_CONTROL_USEPLL); + if (!ret) /* more reserved, Continuous, Master Mode */ + ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006); + if (!ret) /* Set 14-bit mode, select 7 divider */ + ret = mt9m032_write(client, MT9M032_FORMATTER1, 0x111e); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Subdev pad operations + */ + +static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index != 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_Y8_1X8; + return 0; +} + +static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index != 0 || fse->code != V4L2_MBUS_FMT_Y8_1X8) + return -EINVAL; + + fse->min_width = MT9M032_COLUMN_SIZE_DEF; + fse->max_width = MT9M032_COLUMN_SIZE_DEF; + fse->min_height = MT9M032_ROW_SIZE_DEF; + fse->max_height = MT9M032_ROW_SIZE_DEF; + + return 0; +} + +/** + * __mt9m032_get_pad_crop() - get crop rect + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try crop rect from + * @which: select try or active crop rect + * + * Returns a pointer the current active or fh relative try crop rect + */ +static struct v4l2_rect * +__mt9m032_get_pad_crop(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->crop; + default: + return NULL; + } +} + +/** + * __mt9m032_get_pad_format() - get format + * @sensor: pointer to the sensor struct + * @fh: file handle for getting the try format from + * @which: select try or active format + * + * Returns a pointer the current active or fh relative try format + */ +static struct v4l2_mbus_framefmt * +__mt9m032_get_pad_format(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, 0); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &sensor->format; + default: + return NULL; + } +} + +static int mt9m032_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Scaling is not supported, the format is thus fixed. */ + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + ret = 0; + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_get_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + crop->rect = *__mt9m032_get_pad_crop(sensor, fh, crop->which); + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_pad_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + int ret = 0; + + mutex_lock(&sensor->lock); + + if (sensor->streaming && crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + ret = -EBUSY; + goto done; + } + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9M032_COLUMN_START_MIN, + MT9M032_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9M032_ROW_START_MIN, + MT9M032_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), MT9M032_COLUMN_SIZE_MIN, + MT9M032_COLUMN_SIZE_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), MT9M032_ROW_SIZE_MIN, + MT9M032_ROW_SIZE_MAX); + + rect.width = min(rect.width, MT9M032_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9M032_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9m032_get_pad_crop(sensor, fh, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + format = __mt9m032_get_pad_format(sensor, fh, crop->which); + format->width = rect.width; + format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ret = mt9m032_update_geom_timing(sensor); + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + + mutex_lock(&sensor->lock); + memset(fi, 0, sizeof(*fi)); + fi->interval = sensor->frame_interval; + mutex_unlock(&sensor->lock); + + return 0; +} + +static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev, + struct v4l2_subdev_frame_interval *fi) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto done; + } + + /* Avoid divisions by 0. */ + if (fi->interval.denominator == 0) + fi->interval.denominator = 1; + + ret = mt9m032_update_timing(sensor, &fi->interval); + if (!ret) + sensor->frame_interval = fi->interval; + +done: + mutex_unlock(&sensor->lock); + return ret; +} + +static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming) +{ + struct mt9m032 *sensor = to_mt9m032(subdev); + int ret; + + mutex_lock(&sensor->lock); + ret = update_formatter2(sensor, streaming); + if (!ret) + sensor->streaming = streaming; + mutex_unlock(&sensor->lock); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9m032_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int val; + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + if (reg->match.addr != client->addr) + return -ENODEV; + + val = mt9m032_read(client, reg->reg); + if (val < 0) + return -EIO; + + reg->size = 2; + reg->val = val; + + return 0; +} + +static int mt9m032_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct mt9m032 *sensor = to_mt9m032(sd); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + + if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) + return -EINVAL; + + if (reg->match.addr != client->addr) + return -ENODEV; + + return mt9m032_write(client, reg->reg, reg->val); +} +#endif + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT) + | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT) + | MT9M032_READ_MODE2_ROW_BLC + | 0x0007; + + return mt9m032_write(client, MT9M032_READ_MODE2, reg_val); +} + +static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int digital_gain_val; /* in 1/8th (0..127) */ + int analog_mul; /* 0 or 1 */ + int analog_gain_val; /* in 1/16th. (0..63) */ + u16 reg_val; + + digital_gain_val = 51; /* from setup example */ + + if (val < 63) { + analog_mul = 0; + analog_gain_val = val; + } else { + analog_mul = 1; + analog_gain_val = val / 2; + } + + /* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */ + /* overall_gain = a_gain * (1 + digital_gain_val / 8) */ + + reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK) + << MT9M032_GAIN_DIGITAL_SHIFT) + | ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT) + | (analog_gain_val & MT9M032_GAIN_ANALOG_MASK); + + return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val); +} + +static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl) +{ + if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) { + /* round because of multiplier used for values >= 63 */ + ctrl->val &= ~1; + } + + return 0; +} + +static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9m032 *sensor = + container_of(ctrl->handler, struct mt9m032, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev); + int ret; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + return mt9m032_set_gain(sensor, ctrl->val); + + case V4L2_CID_HFLIP: + /* case V4L2_CID_VFLIP: -- In the same cluster */ + return update_read_mode2(sensor, sensor->vflip->val, + sensor->hflip->val); + + case V4L2_CID_EXPOSURE: + ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH, + (ctrl->val >> 16) & 0xffff); + if (ret < 0) + return ret; + + return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW, + ctrl->val & 0xffff); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9m032_ctrl_ops = { + .s_ctrl = mt9m032_set_ctrl, + .try_ctrl = mt9m032_try_ctrl, +}; + +/* -------------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops mt9m032_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9m032_g_register, + .s_register = mt9m032_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9m032_video_ops = { + .s_stream = mt9m032_s_stream, + .g_frame_interval = mt9m032_get_frame_interval, + .s_frame_interval = mt9m032_set_frame_interval, +}; + +static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = { + .enum_mbus_code = mt9m032_enum_mbus_code, + .enum_frame_size = mt9m032_enum_frame_size, + .get_fmt = mt9m032_get_pad_format, + .set_fmt = mt9m032_set_pad_format, + .set_crop = mt9m032_set_pad_crop, + .get_crop = mt9m032_get_pad_crop, +}; + +static const struct v4l2_subdev_ops mt9m032_ops = { + .core = &mt9m032_core_ops, + .video = &mt9m032_video_ops, + .pad = &mt9m032_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9m032_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct mt9m032_platform_data *pdata = client->dev.platform_data; + struct i2c_adapter *adapter = client->adapter; + struct mt9m032 *sensor; + int chip_version; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + if (!client->dev.platform_data) + return -ENODEV; + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) + return -ENOMEM; + + mutex_init(&sensor->lock); + + sensor->pdata = pdata; + + v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION); + if (chip_version != MT9M032_CHIP_VERSION_VALUE) { + dev_err(&client->dev, "MT9M032 not detected, wrong version " + "0x%04x\n", chip_version); + ret = -ENODEV; + goto error_sensor; + } + + dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n", + client->addr); + + sensor->frame_interval.numerator = 1; + sensor->frame_interval.denominator = 30; + + sensor->crop.left = MT9M032_COLUMN_START_DEF; + sensor->crop.top = MT9M032_ROW_START_DEF; + sensor->crop.width = MT9M032_COLUMN_SIZE_DEF; + sensor->crop.height = MT9M032_ROW_SIZE_DEF; + + sensor->format.width = sensor->crop.width; + sensor->format.height = sensor->crop.height; + sensor->format.code = V4L2_MBUS_FMT_Y8_1X8; + sensor->format.field = V4L2_FIELD_NONE; + sensor->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_ctrl_handler_init(&sensor->ctrls, 5); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_GAIN, 0, 127, 1, 64); + + sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, + &mt9m032_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN, + MT9M032_SHUTTER_WIDTH_MAX, 1, + MT9M032_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops, + V4L2_CID_PIXEL_RATE, pdata->pix_clock, + pdata->pix_clock, 1, pdata->pix_clock); + + if (sensor->ctrls.error) { + ret = sensor->ctrls.error; + dev_err(&client->dev, "control initialization error %d\n", ret); + goto error_ctrl; + } + + v4l2_ctrl_cluster(2, &sensor->hflip); + + sensor->subdev.ctrl_handler = &sensor->ctrls; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0); + if (ret < 0) + goto error_ctrl; + + ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */ + if (ret < 0) + goto error_entity; + mt9m032_write(client, MT9M032_RESET, 0); /* reset off */ + if (ret < 0) + goto error_entity; + + ret = mt9m032_setup_pll(sensor); + if (ret < 0) + goto error_entity; + usleep_range(10000, 11000); + + ret = v4l2_ctrl_handler_setup(&sensor->ctrls); + if (ret < 0) + goto error_entity; + + /* SIZE */ + ret = mt9m032_update_geom_timing(sensor); + if (ret < 0) + goto error_entity; + + ret = mt9m032_write(client, 0x41, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x42, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x43, 0x0003); /* reserved !!! */ + if (ret < 0) + goto error_entity; + ret = mt9m032_write(client, 0x7f, 0x0000); /* reserved !!! */ + if (ret < 0) + goto error_entity; + if (sensor->pdata->invert_pixclock) { + ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL, + MT9M032_PIX_CLK_CTRL_INV_PIXCLK); + if (ret < 0) + goto error_entity; + } + + ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */ + if (ret < 0) + goto error_entity; + msleep(100); + ret = update_formatter2(sensor, false); + if (ret < 0) + goto error_entity; + + return ret; + +error_entity: + media_entity_cleanup(&sensor->subdev.entity); +error_ctrl: + v4l2_ctrl_handler_free(&sensor->ctrls); +error_sensor: + mutex_destroy(&sensor->lock); + kfree(sensor); + return ret; +} + +static int mt9m032_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9m032 *sensor = to_mt9m032(subdev); + + v4l2_device_unregister_subdev(subdev); + v4l2_ctrl_handler_free(&sensor->ctrls); + media_entity_cleanup(&subdev->entity); + mutex_destroy(&sensor->lock); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id mt9m032_id_table[] = { + { MT9M032_NAME, 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, mt9m032_id_table); + +static struct i2c_driver mt9m032_i2c_driver = { + .driver = { + .name = MT9M032_NAME, + }, + .probe = mt9m032_probe, + .remove = mt9m032_remove, + .id_table = mt9m032_id_table, +}; + +module_i2c_driver(mt9m032_i2c_driver); + +MODULE_AUTHOR("Martin Hostettler <martin@neutronstar.dyndns.org>"); +MODULE_DESCRIPTION("MT9M032 camera sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c new file mode 100644 index 000000000000..3be537ef22d2 --- /dev/null +++ b/drivers/media/i2c/mt9p031.c @@ -0,0 +1,1071 @@ +/* + * Driver for MT9P031 CMOS Image Sensor from Aptina + * + * Copyright (C) 2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Copyright (C) 2011, Javier Martin <javier.martin@vista-silicon.com> + * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * Based on the MT9V032 driver and Bastian Hecht's code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/videodev2.h> + +#include <media/mt9p031.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#include "aptina-pll.h" + +#define MT9P031_PIXEL_ARRAY_WIDTH 2752 +#define MT9P031_PIXEL_ARRAY_HEIGHT 2004 + +#define MT9P031_CHIP_VERSION 0x00 +#define MT9P031_CHIP_VERSION_VALUE 0x1801 +#define MT9P031_ROW_START 0x01 +#define MT9P031_ROW_START_MIN 0 +#define MT9P031_ROW_START_MAX 2004 +#define MT9P031_ROW_START_DEF 54 +#define MT9P031_COLUMN_START 0x02 +#define MT9P031_COLUMN_START_MIN 0 +#define MT9P031_COLUMN_START_MAX 2750 +#define MT9P031_COLUMN_START_DEF 16 +#define MT9P031_WINDOW_HEIGHT 0x03 +#define MT9P031_WINDOW_HEIGHT_MIN 2 +#define MT9P031_WINDOW_HEIGHT_MAX 2006 +#define MT9P031_WINDOW_HEIGHT_DEF 1944 +#define MT9P031_WINDOW_WIDTH 0x04 +#define MT9P031_WINDOW_WIDTH_MIN 2 +#define MT9P031_WINDOW_WIDTH_MAX 2752 +#define MT9P031_WINDOW_WIDTH_DEF 2592 +#define MT9P031_HORIZONTAL_BLANK 0x05 +#define MT9P031_HORIZONTAL_BLANK_MIN 0 +#define MT9P031_HORIZONTAL_BLANK_MAX 4095 +#define MT9P031_VERTICAL_BLANK 0x06 +#define MT9P031_VERTICAL_BLANK_MIN 0 +#define MT9P031_VERTICAL_BLANK_MAX 4095 +#define MT9P031_VERTICAL_BLANK_DEF 25 +#define MT9P031_OUTPUT_CONTROL 0x07 +#define MT9P031_OUTPUT_CONTROL_CEN 2 +#define MT9P031_OUTPUT_CONTROL_SYN 1 +#define MT9P031_OUTPUT_CONTROL_DEF 0x1f82 +#define MT9P031_SHUTTER_WIDTH_UPPER 0x08 +#define MT9P031_SHUTTER_WIDTH_LOWER 0x09 +#define MT9P031_SHUTTER_WIDTH_MIN 1 +#define MT9P031_SHUTTER_WIDTH_MAX 1048575 +#define MT9P031_SHUTTER_WIDTH_DEF 1943 +#define MT9P031_PLL_CONTROL 0x10 +#define MT9P031_PLL_CONTROL_PWROFF 0x0050 +#define MT9P031_PLL_CONTROL_PWRON 0x0051 +#define MT9P031_PLL_CONTROL_USEPLL 0x0052 +#define MT9P031_PLL_CONFIG_1 0x11 +#define MT9P031_PLL_CONFIG_2 0x12 +#define MT9P031_PIXEL_CLOCK_CONTROL 0x0a +#define MT9P031_FRAME_RESTART 0x0b +#define MT9P031_SHUTTER_DELAY 0x0c +#define MT9P031_RST 0x0d +#define MT9P031_RST_ENABLE 1 +#define MT9P031_RST_DISABLE 0 +#define MT9P031_READ_MODE_1 0x1e +#define MT9P031_READ_MODE_2 0x20 +#define MT9P031_READ_MODE_2_ROW_MIR (1 << 15) +#define MT9P031_READ_MODE_2_COL_MIR (1 << 14) +#define MT9P031_READ_MODE_2_ROW_BLC (1 << 6) +#define MT9P031_ROW_ADDRESS_MODE 0x22 +#define MT9P031_COLUMN_ADDRESS_MODE 0x23 +#define MT9P031_GLOBAL_GAIN 0x35 +#define MT9P031_GLOBAL_GAIN_MIN 8 +#define MT9P031_GLOBAL_GAIN_MAX 1024 +#define MT9P031_GLOBAL_GAIN_DEF 8 +#define MT9P031_GLOBAL_GAIN_MULT (1 << 6) +#define MT9P031_ROW_BLACK_TARGET 0x49 +#define MT9P031_ROW_BLACK_DEF_OFFSET 0x4b +#define MT9P031_GREEN1_OFFSET 0x60 +#define MT9P031_GREEN2_OFFSET 0x61 +#define MT9P031_BLACK_LEVEL_CALIBRATION 0x62 +#define MT9P031_BLC_MANUAL_BLC (1 << 0) +#define MT9P031_RED_OFFSET 0x63 +#define MT9P031_BLUE_OFFSET 0x64 +#define MT9P031_TEST_PATTERN 0xa0 +#define MT9P031_TEST_PATTERN_SHIFT 3 +#define MT9P031_TEST_PATTERN_ENABLE (1 << 0) +#define MT9P031_TEST_PATTERN_DISABLE (0 << 0) +#define MT9P031_TEST_PATTERN_GREEN 0xa1 +#define MT9P031_TEST_PATTERN_RED 0xa2 +#define MT9P031_TEST_PATTERN_BLUE 0xa3 + +enum mt9p031_model { + MT9P031_MODEL_COLOR, + MT9P031_MODEL_MONOCHROME, +}; + +struct mt9p031 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct v4l2_rect crop; /* Sensor window */ + struct v4l2_mbus_framefmt format; + struct mt9p031_platform_data *pdata; + struct mutex power_lock; /* lock to protect power_count */ + int power_count; + + enum mt9p031_model model; + struct aptina_pll pll; + int reset; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *blc_auto; + struct v4l2_ctrl *blc_offset; + + /* Registers cache */ + u16 output_control; + u16 mode2; +}; + +static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9p031, subdev); +} + +static int mt9p031_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9p031_write(struct i2c_client *client, u8 reg, u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear, + u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 value = (mt9p031->output_control & ~clear) | set; + int ret; + + ret = mt9p031_write(client, MT9P031_OUTPUT_CONTROL, value); + if (ret < 0) + return ret; + + mt9p031->output_control = value; + return 0; +} + +static int mt9p031_set_mode2(struct mt9p031 *mt9p031, u16 clear, u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 value = (mt9p031->mode2 & ~clear) | set; + int ret; + + ret = mt9p031_write(client, MT9P031_READ_MODE_2, value); + if (ret < 0) + return ret; + + mt9p031->mode2 = value; + return 0; +} + +static int mt9p031_reset(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + /* Disable chip output, synchronous option update */ + ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_DISABLE); + if (ret < 0) + return ret; + + return mt9p031_set_output_control(mt9p031, MT9P031_OUTPUT_CONTROL_CEN, + 0); +} + +static int mt9p031_pll_setup(struct mt9p031 *mt9p031) +{ + static const struct aptina_pll_limits limits = { + .ext_clock_min = 6000000, + .ext_clock_max = 27000000, + .int_clock_min = 2000000, + .int_clock_max = 13500000, + .out_clock_min = 180000000, + .out_clock_max = 360000000, + .pix_clock_max = 96000000, + .n_min = 1, + .n_max = 64, + .m_min = 16, + .m_max = 255, + .p1_min = 1, + .p1_max = 128, + }; + + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + struct mt9p031_platform_data *pdata = mt9p031->pdata; + + mt9p031->pll.ext_clock = pdata->ext_freq; + mt9p031->pll.pix_clock = pdata->target_freq; + + return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll); +} + +static int mt9p031_pll_enable(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + ret = mt9p031_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON); + if (ret < 0) + return ret; + + ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1, + (mt9p031->pll.m << 8) | (mt9p031->pll.n - 1)); + if (ret < 0) + return ret; + + ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll.p1 - 1); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + ret = mt9p031_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWRON | + MT9P031_PLL_CONTROL_USEPLL); + return ret; +} + +static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + + return mt9p031_write(client, MT9P031_PLL_CONTROL, + MT9P031_PLL_CONTROL_PWROFF); +} + +static int mt9p031_power_on(struct mt9p031 *mt9p031) +{ + /* Ensure RESET_BAR is low */ + if (mt9p031->reset != -1) { + gpio_set_value(mt9p031->reset, 0); + usleep_range(1000, 2000); + } + + /* Emable clock */ + if (mt9p031->pdata->set_xclk) + mt9p031->pdata->set_xclk(&mt9p031->subdev, + mt9p031->pdata->ext_freq); + + /* Now RESET_BAR must be high */ + if (mt9p031->reset != -1) { + gpio_set_value(mt9p031->reset, 1); + usleep_range(1000, 2000); + } + + return 0; +} + +static void mt9p031_power_off(struct mt9p031 *mt9p031) +{ + if (mt9p031->reset != -1) { + gpio_set_value(mt9p031->reset, 0); + usleep_range(1000, 2000); + } + + if (mt9p031->pdata->set_xclk) + mt9p031->pdata->set_xclk(&mt9p031->subdev, 0); +} + +static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + if (!on) { + mt9p031_power_off(mt9p031); + return 0; + } + + ret = mt9p031_power_on(mt9p031); + if (ret < 0) + return ret; + + ret = mt9p031_reset(mt9p031); + if (ret < 0) { + dev_err(&client->dev, "Failed to reset the camera\n"); + return ret; + } + + return v4l2_ctrl_handler_setup(&mt9p031->ctrls); +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static int mt9p031_set_params(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + struct v4l2_mbus_framefmt *format = &mt9p031->format; + const struct v4l2_rect *crop = &mt9p031->crop; + unsigned int hblank; + unsigned int vblank; + unsigned int xskip; + unsigned int yskip; + unsigned int xbin; + unsigned int ybin; + int ret; + + /* Windows position and size. + * + * TODO: Make sure the start coordinates and window size match the + * skipping, binning and mirroring (see description of registers 2 and 4 + * in table 13, and Binning section on page 41). + */ + ret = mt9p031_write(client, MT9P031_COLUMN_START, crop->left); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_ROW_START, crop->top); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_WINDOW_WIDTH, crop->width - 1); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_WINDOW_HEIGHT, crop->height - 1); + if (ret < 0) + return ret; + + /* Row and column binning and skipping. Use the maximum binning value + * compatible with the skipping settings. + */ + xskip = DIV_ROUND_CLOSEST(crop->width, format->width); + yskip = DIV_ROUND_CLOSEST(crop->height, format->height); + xbin = 1 << (ffs(xskip) - 1); + ybin = 1 << (ffs(yskip) - 1); + + ret = mt9p031_write(client, MT9P031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (xskip - 1)); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (yskip - 1)); + if (ret < 0) + return ret; + + /* Blanking - use minimum value for horizontal blanking and default + * value for vertical blanking. + */ + hblank = 346 * ybin + 64 + (80 >> max_t(unsigned int, xbin, 3)); + vblank = MT9P031_VERTICAL_BLANK_DEF; + + ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank); + if (ret < 0) + return ret; + + return ret; +} + +static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + int ret; + + if (!enable) { + /* Stop sensor readout */ + ret = mt9p031_set_output_control(mt9p031, + MT9P031_OUTPUT_CONTROL_CEN, 0); + if (ret < 0) + return ret; + + return mt9p031_pll_disable(mt9p031); + } + + ret = mt9p031_set_params(mt9p031); + if (ret < 0) + return ret; + + /* Switch to master "normal" mode */ + ret = mt9p031_set_output_control(mt9p031, 0, + MT9P031_OUTPUT_CONTROL_CEN); + if (ret < 0) + return ret; + + return mt9p031_pll_enable(mt9p031); +} + +static int mt9p031_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + if (code->pad || code->index) + return -EINVAL; + + code->code = mt9p031->format.code; + return 0; +} + +static int mt9p031_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + if (fse->index >= 8 || fse->code != mt9p031->format.code) + return -EINVAL; + + fse->min_width = MT9P031_WINDOW_WIDTH_DEF + / min_t(unsigned int, 7, fse->index + 1); + fse->max_width = fse->min_width; + fse->min_height = MT9P031_WINDOW_HEIGHT_DEF / (fse->index + 1); + fse->max_height = fse->min_height; + + return 0; +} + +static struct v4l2_mbus_framefmt * +__mt9p031_get_pad_format(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9p031->format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__mt9p031_get_pad_crop(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9p031->crop; + default: + return NULL; + } +} + +static int mt9p031_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + fmt->format = *__mt9p031_get_pad_format(mt9p031, fh, fmt->pad, + fmt->which); + return 0; +} + +static int mt9p031_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + __crop = __mt9p031_get_pad_crop(mt9p031, fh, format->pad, + format->which); + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + max(__crop->width / 7, MT9P031_WINDOW_WIDTH_MIN), + __crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + max(__crop->height / 8, MT9P031_WINDOW_HEIGHT_MIN), + __crop->height); + + hratio = DIV_ROUND_CLOSEST(__crop->width, width); + vratio = DIV_ROUND_CLOSEST(__crop->height, height); + + __format = __mt9p031_get_pad_format(mt9p031, fh, format->pad, + format->which); + __format->width = __crop->width / hratio; + __format->height = __crop->height / vratio; + + format->format = *__format; + + return 0; +} + +static int mt9p031_get_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + crop->rect = *__mt9p031_get_pad_crop(mt9p031, fh, crop->pad, + crop->which); + return 0; +} + +static int mt9p031_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9P031_COLUMN_START_MIN, + MT9P031_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9P031_ROW_START_MIN, + MT9P031_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), + MT9P031_WINDOW_WIDTH_MIN, + MT9P031_WINDOW_WIDTH_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), + MT9P031_WINDOW_HEIGHT_MIN, + MT9P031_WINDOW_HEIGHT_MAX); + + rect.width = min(rect.width, MT9P031_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9P031_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9p031_get_pad_crop(mt9p031, fh, crop->pad, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + __format = __mt9p031_get_pad_format(mt9p031, fh, crop->pad, + crop->which); + __format->width = rect.width; + __format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +#define V4L2_CID_TEST_PATTERN (V4L2_CID_USER_BASE | 0x1001) +#define V4L2_CID_BLC_AUTO (V4L2_CID_USER_BASE | 0x1002) +#define V4L2_CID_BLC_TARGET_LEVEL (V4L2_CID_USER_BASE | 0x1003) +#define V4L2_CID_BLC_ANALOG_OFFSET (V4L2_CID_USER_BASE | 0x1004) +#define V4L2_CID_BLC_DIGITAL_OFFSET (V4L2_CID_USER_BASE | 0x1005) + +static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9p031 *mt9p031 = + container_of(ctrl->handler, struct mt9p031, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 data; + int ret; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + ret = mt9p031_write(client, MT9P031_SHUTTER_WIDTH_UPPER, + (ctrl->val >> 16) & 0xffff); + if (ret < 0) + return ret; + + return mt9p031_write(client, MT9P031_SHUTTER_WIDTH_LOWER, + ctrl->val & 0xffff); + + case V4L2_CID_GAIN: + /* Gain is controlled by 2 analog stages and a digital stage. + * Valid values for the 3 stages are + * + * Stage Min Max Step + * ------------------------------------------ + * First analog stage x1 x2 1 + * Second analog stage x1 x4 0.125 + * Digital stage x1 x16 0.125 + * + * To minimize noise, the gain stages should be used in the + * second analog stage, first analog stage, digital stage order. + * Gain from a previous stage should be pushed to its maximum + * value before the next stage is used. + */ + if (ctrl->val <= 32) { + data = ctrl->val; + } else if (ctrl->val <= 64) { + ctrl->val &= ~1; + data = (1 << 6) | (ctrl->val >> 1); + } else { + ctrl->val &= ~7; + data = ((ctrl->val - 64) << 5) | (1 << 6) | 32; + } + + return mt9p031_write(client, MT9P031_GLOBAL_GAIN, data); + + case V4L2_CID_HFLIP: + if (ctrl->val) + return mt9p031_set_mode2(mt9p031, + 0, MT9P031_READ_MODE_2_COL_MIR); + else + return mt9p031_set_mode2(mt9p031, + MT9P031_READ_MODE_2_COL_MIR, 0); + + case V4L2_CID_VFLIP: + if (ctrl->val) + return mt9p031_set_mode2(mt9p031, + 0, MT9P031_READ_MODE_2_ROW_MIR); + else + return mt9p031_set_mode2(mt9p031, + MT9P031_READ_MODE_2_ROW_MIR, 0); + + case V4L2_CID_TEST_PATTERN: + if (!ctrl->val) { + /* Restore the black level compensation settings. */ + if (mt9p031->blc_auto->cur.val != 0) { + ret = mt9p031_s_ctrl(mt9p031->blc_auto); + if (ret < 0) + return ret; + } + if (mt9p031->blc_offset->cur.val != 0) { + ret = mt9p031_s_ctrl(mt9p031->blc_offset); + if (ret < 0) + return ret; + } + return mt9p031_write(client, MT9P031_TEST_PATTERN, + MT9P031_TEST_PATTERN_DISABLE); + } + + ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_TEST_PATTERN_RED, 0x0a50); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_TEST_PATTERN_BLUE, 0x0aa0); + if (ret < 0) + return ret; + + /* Disable digital black level compensation when using a test + * pattern. + */ + ret = mt9p031_set_mode2(mt9p031, MT9P031_READ_MODE_2_ROW_BLC, + 0); + if (ret < 0) + return ret; + + ret = mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, 0); + if (ret < 0) + return ret; + + return mt9p031_write(client, MT9P031_TEST_PATTERN, + ((ctrl->val - 1) << MT9P031_TEST_PATTERN_SHIFT) + | MT9P031_TEST_PATTERN_ENABLE); + + case V4L2_CID_BLC_AUTO: + ret = mt9p031_set_mode2(mt9p031, + ctrl->val ? 0 : MT9P031_READ_MODE_2_ROW_BLC, + ctrl->val ? MT9P031_READ_MODE_2_ROW_BLC : 0); + if (ret < 0) + return ret; + + return mt9p031_write(client, MT9P031_BLACK_LEVEL_CALIBRATION, + ctrl->val ? 0 : MT9P031_BLC_MANUAL_BLC); + + case V4L2_CID_BLC_TARGET_LEVEL: + return mt9p031_write(client, MT9P031_ROW_BLACK_TARGET, + ctrl->val); + + case V4L2_CID_BLC_ANALOG_OFFSET: + data = ctrl->val & ((1 << 9) - 1); + + ret = mt9p031_write(client, MT9P031_GREEN1_OFFSET, data); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_GREEN2_OFFSET, data); + if (ret < 0) + return ret; + ret = mt9p031_write(client, MT9P031_RED_OFFSET, data); + if (ret < 0) + return ret; + return mt9p031_write(client, MT9P031_BLUE_OFFSET, data); + + case V4L2_CID_BLC_DIGITAL_OFFSET: + return mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, + ctrl->val & ((1 << 12) - 1)); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9p031_ctrl_ops = { + .s_ctrl = mt9p031_s_ctrl, +}; + +static const char * const mt9p031_test_pattern_menu[] = { + "Disabled", + "Color Field", + "Horizontal Gradient", + "Vertical Gradient", + "Diagonal Gradient", + "Classic Test Pattern", + "Walking 1s", + "Monochrome Horizontal Bars", + "Monochrome Vertical Bars", + "Vertical Color Bars", +}; + +static const struct v4l2_ctrl_config mt9p031_ctrls[] = { + { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_TEST_PATTERN, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Test Pattern", + .min = 0, + .max = ARRAY_SIZE(mt9p031_test_pattern_menu) - 1, + .step = 0, + .def = 0, + .flags = 0, + .menu_skip_mask = 0, + .qmenu = mt9p031_test_pattern_menu, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "BLC, Auto", + .min = 0, + .max = 1, + .step = 1, + .def = 1, + .flags = 0, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_TARGET_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "BLC Target Level", + .min = 0, + .max = 4095, + .step = 1, + .def = 168, + .flags = 0, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_ANALOG_OFFSET, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "BLC Analog Offset", + .min = -255, + .max = 255, + .step = 1, + .def = 32, + .flags = 0, + }, { + .ops = &mt9p031_ctrl_ops, + .id = V4L2_CID_BLC_DIGITAL_OFFSET, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "BLC Digital Offset", + .min = -2048, + .max = 2047, + .step = 1, + .def = 40, + .flags = 0, + } +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int mt9p031_set_power(struct v4l2_subdev *subdev, int on) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + int ret = 0; + + mutex_lock(&mt9p031->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9p031->power_count == !on) { + ret = __mt9p031_set_power(mt9p031, !!on); + if (ret < 0) + goto out; + } + + /* Update the power count. */ + mt9p031->power_count += on ? 1 : -1; + WARN_ON(mt9p031->power_count < 0); + +out: + mutex_unlock(&mt9p031->power_lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int mt9p031_registered(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + s32 data; + int ret; + + ret = mt9p031_power_on(mt9p031); + if (ret < 0) { + dev_err(&client->dev, "MT9P031 power up failed\n"); + return ret; + } + + /* Read out the chip version register */ + data = mt9p031_read(client, MT9P031_CHIP_VERSION); + if (data != MT9P031_CHIP_VERSION_VALUE) { + dev_err(&client->dev, "MT9P031 not detected, wrong version " + "0x%04x\n", data); + return -ENODEV; + } + + mt9p031_power_off(mt9p031); + + dev_info(&client->dev, "MT9P031 detected at address 0x%02x\n", + client->addr); + + return ret; +} + +static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_try_crop(fh, 0); + crop->left = MT9P031_COLUMN_START_DEF; + crop->top = MT9P031_ROW_START_DEF; + crop->width = MT9P031_WINDOW_WIDTH_DEF; + crop->height = MT9P031_WINDOW_HEIGHT_DEF; + + format = v4l2_subdev_get_try_format(fh, 0); + + if (mt9p031->model == MT9P031_MODEL_MONOCHROME) + format->code = V4L2_MBUS_FMT_Y12_1X12; + else + format->code = V4L2_MBUS_FMT_SGRBG12_1X12; + + format->width = MT9P031_WINDOW_WIDTH_DEF; + format->height = MT9P031_WINDOW_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return mt9p031_set_power(subdev, 1); +} + +static int mt9p031_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + return mt9p031_set_power(subdev, 0); +} + +static struct v4l2_subdev_core_ops mt9p031_subdev_core_ops = { + .s_power = mt9p031_set_power, +}; + +static struct v4l2_subdev_video_ops mt9p031_subdev_video_ops = { + .s_stream = mt9p031_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9p031_subdev_pad_ops = { + .enum_mbus_code = mt9p031_enum_mbus_code, + .enum_frame_size = mt9p031_enum_frame_size, + .get_fmt = mt9p031_get_format, + .set_fmt = mt9p031_set_format, + .get_crop = mt9p031_get_crop, + .set_crop = mt9p031_set_crop, +}; + +static struct v4l2_subdev_ops mt9p031_subdev_ops = { + .core = &mt9p031_subdev_core_ops, + .video = &mt9p031_subdev_video_ops, + .pad = &mt9p031_subdev_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { + .registered = mt9p031_registered, + .open = mt9p031_open, + .close = mt9p031_close, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9p031_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct mt9p031 *mt9p031; + unsigned int i; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9p031 = kzalloc(sizeof(*mt9p031), GFP_KERNEL); + if (mt9p031 == NULL) + return -ENOMEM; + + mt9p031->pdata = pdata; + mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; + mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; + mt9p031->model = did->driver_data; + mt9p031->reset = -1; + + v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 5); + + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_EXPOSURE, MT9P031_SHUTTER_WIDTH_MIN, + MT9P031_SHUTTER_WIDTH_MAX, 1, + MT9P031_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_GAIN, MT9P031_GLOBAL_GAIN_MIN, + MT9P031_GLOBAL_GAIN_MAX, 1, MT9P031_GLOBAL_GAIN_DEF); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, + V4L2_CID_PIXEL_RATE, pdata->target_freq, + pdata->target_freq, 1, pdata->target_freq); + + for (i = 0; i < ARRAY_SIZE(mt9p031_ctrls); ++i) + v4l2_ctrl_new_custom(&mt9p031->ctrls, &mt9p031_ctrls[i], NULL); + + mt9p031->subdev.ctrl_handler = &mt9p031->ctrls; + + if (mt9p031->ctrls.error) { + printk(KERN_INFO "%s: control initialization error %d\n", + __func__, mt9p031->ctrls.error); + ret = mt9p031->ctrls.error; + goto done; + } + + mt9p031->blc_auto = v4l2_ctrl_find(&mt9p031->ctrls, V4L2_CID_BLC_AUTO); + mt9p031->blc_offset = v4l2_ctrl_find(&mt9p031->ctrls, + V4L2_CID_BLC_DIGITAL_OFFSET); + + mutex_init(&mt9p031->power_lock); + v4l2_i2c_subdev_init(&mt9p031->subdev, client, &mt9p031_subdev_ops); + mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops; + + mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad, 0); + if (ret < 0) + goto done; + + mt9p031->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + mt9p031->crop.width = MT9P031_WINDOW_WIDTH_DEF; + mt9p031->crop.height = MT9P031_WINDOW_HEIGHT_DEF; + mt9p031->crop.left = MT9P031_COLUMN_START_DEF; + mt9p031->crop.top = MT9P031_ROW_START_DEF; + + if (mt9p031->model == MT9P031_MODEL_MONOCHROME) + mt9p031->format.code = V4L2_MBUS_FMT_Y12_1X12; + else + mt9p031->format.code = V4L2_MBUS_FMT_SGRBG12_1X12; + + mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF; + mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF; + mt9p031->format.field = V4L2_FIELD_NONE; + mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB; + + if (pdata->reset != -1) { + ret = gpio_request_one(pdata->reset, GPIOF_OUT_INIT_LOW, + "mt9p031_rst"); + if (ret < 0) + goto done; + + mt9p031->reset = pdata->reset; + } + + ret = mt9p031_pll_setup(mt9p031); + +done: + if (ret < 0) { + if (mt9p031->reset != -1) + gpio_free(mt9p031->reset); + + v4l2_ctrl_handler_free(&mt9p031->ctrls); + media_entity_cleanup(&mt9p031->subdev.entity); + kfree(mt9p031); + } + + return ret; +} + +static int mt9p031_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9p031 *mt9p031 = to_mt9p031(subdev); + + v4l2_ctrl_handler_free(&mt9p031->ctrls); + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + if (mt9p031->reset != -1) + gpio_free(mt9p031->reset); + kfree(mt9p031); + + return 0; +} + +static const struct i2c_device_id mt9p031_id[] = { + { "mt9p031", MT9P031_MODEL_COLOR }, + { "mt9p031m", MT9P031_MODEL_MONOCHROME }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9p031_id); + +static struct i2c_driver mt9p031_i2c_driver = { + .driver = { + .name = "mt9p031", + }, + .probe = mt9p031_probe, + .remove = mt9p031_remove, + .id_table = mt9p031_id, +}; + +module_i2c_driver(mt9p031_i2c_driver); + +MODULE_DESCRIPTION("Aptina MT9P031 Camera driver"); +MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/mt9t001.c b/drivers/media/i2c/mt9t001.c new file mode 100644 index 000000000000..6d343adf891d --- /dev/null +++ b/drivers/media/i2c/mt9t001.c @@ -0,0 +1,833 @@ +/* + * Driver for MT9T001 CMOS Image Sensor from Aptina (Micron) + * + * Copyright (C) 2010-2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * Based on the MT9M001 driver, + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/log2.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/v4l2-mediabus.h> + +#include <media/mt9t001.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#define MT9T001_PIXEL_ARRAY_HEIGHT 1568 +#define MT9T001_PIXEL_ARRAY_WIDTH 2112 + +#define MT9T001_CHIP_VERSION 0x00 +#define MT9T001_CHIP_ID 0x1621 +#define MT9T001_ROW_START 0x01 +#define MT9T001_ROW_START_MIN 0 +#define MT9T001_ROW_START_DEF 20 +#define MT9T001_ROW_START_MAX 1534 +#define MT9T001_COLUMN_START 0x02 +#define MT9T001_COLUMN_START_MIN 0 +#define MT9T001_COLUMN_START_DEF 32 +#define MT9T001_COLUMN_START_MAX 2046 +#define MT9T001_WINDOW_HEIGHT 0x03 +#define MT9T001_WINDOW_HEIGHT_MIN 1 +#define MT9T001_WINDOW_HEIGHT_DEF 1535 +#define MT9T001_WINDOW_HEIGHT_MAX 1567 +#define MT9T001_WINDOW_WIDTH 0x04 +#define MT9T001_WINDOW_WIDTH_MIN 1 +#define MT9T001_WINDOW_WIDTH_DEF 2047 +#define MT9T001_WINDOW_WIDTH_MAX 2111 +#define MT9T001_HORIZONTAL_BLANKING 0x05 +#define MT9T001_HORIZONTAL_BLANKING_MIN 21 +#define MT9T001_HORIZONTAL_BLANKING_MAX 1023 +#define MT9T001_VERTICAL_BLANKING 0x06 +#define MT9T001_VERTICAL_BLANKING_MIN 3 +#define MT9T001_VERTICAL_BLANKING_MAX 1023 +#define MT9T001_OUTPUT_CONTROL 0x07 +#define MT9T001_OUTPUT_CONTROL_SYNC (1 << 0) +#define MT9T001_OUTPUT_CONTROL_CHIP_ENABLE (1 << 1) +#define MT9T001_OUTPUT_CONTROL_TEST_DATA (1 << 6) +#define MT9T001_SHUTTER_WIDTH_HIGH 0x08 +#define MT9T001_SHUTTER_WIDTH_LOW 0x09 +#define MT9T001_SHUTTER_WIDTH_MIN 1 +#define MT9T001_SHUTTER_WIDTH_DEF 1561 +#define MT9T001_SHUTTER_WIDTH_MAX (1024 * 1024) +#define MT9T001_PIXEL_CLOCK 0x0a +#define MT9T001_PIXEL_CLOCK_INVERT (1 << 15) +#define MT9T001_PIXEL_CLOCK_SHIFT_MASK (7 << 8) +#define MT9T001_PIXEL_CLOCK_SHIFT_SHIFT 8 +#define MT9T001_PIXEL_CLOCK_DIVIDE_MASK (0x7f << 0) +#define MT9T001_FRAME_RESTART 0x0b +#define MT9T001_SHUTTER_DELAY 0x0c +#define MT9T001_SHUTTER_DELAY_MAX 2047 +#define MT9T001_RESET 0x0d +#define MT9T001_READ_MODE1 0x1e +#define MT9T001_READ_MODE_SNAPSHOT (1 << 8) +#define MT9T001_READ_MODE_STROBE_ENABLE (1 << 9) +#define MT9T001_READ_MODE_STROBE_WIDTH (1 << 10) +#define MT9T001_READ_MODE_STROBE_OVERRIDE (1 << 11) +#define MT9T001_READ_MODE2 0x20 +#define MT9T001_READ_MODE_BAD_FRAMES (1 << 0) +#define MT9T001_READ_MODE_LINE_VALID_CONTINUOUS (1 << 9) +#define MT9T001_READ_MODE_LINE_VALID_FRAME (1 << 10) +#define MT9T001_READ_MODE3 0x21 +#define MT9T001_READ_MODE_GLOBAL_RESET (1 << 0) +#define MT9T001_READ_MODE_GHST_CTL (1 << 1) +#define MT9T001_ROW_ADDRESS_MODE 0x22 +#define MT9T001_ROW_SKIP_MASK (7 << 0) +#define MT9T001_ROW_BIN_MASK (3 << 3) +#define MT9T001_ROW_BIN_SHIFT 3 +#define MT9T001_COLUMN_ADDRESS_MODE 0x23 +#define MT9T001_COLUMN_SKIP_MASK (7 << 0) +#define MT9T001_COLUMN_BIN_MASK (3 << 3) +#define MT9T001_COLUMN_BIN_SHIFT 3 +#define MT9T001_GREEN1_GAIN 0x2b +#define MT9T001_BLUE_GAIN 0x2c +#define MT9T001_RED_GAIN 0x2d +#define MT9T001_GREEN2_GAIN 0x2e +#define MT9T001_TEST_DATA 0x32 +#define MT9T001_GLOBAL_GAIN 0x35 +#define MT9T001_GLOBAL_GAIN_MIN 8 +#define MT9T001_GLOBAL_GAIN_MAX 1024 +#define MT9T001_BLACK_LEVEL 0x49 +#define MT9T001_ROW_BLACK_DEFAULT_OFFSET 0x4b +#define MT9T001_BLC_DELTA_THRESHOLDS 0x5d +#define MT9T001_CAL_THRESHOLDS 0x5f +#define MT9T001_GREEN1_OFFSET 0x60 +#define MT9T001_GREEN2_OFFSET 0x61 +#define MT9T001_BLACK_LEVEL_CALIBRATION 0x62 +#define MT9T001_BLACK_LEVEL_OVERRIDE (1 << 0) +#define MT9T001_BLACK_LEVEL_DISABLE_OFFSET (1 << 1) +#define MT9T001_BLACK_LEVEL_RECALCULATE (1 << 12) +#define MT9T001_BLACK_LEVEL_LOCK_RED_BLUE (1 << 13) +#define MT9T001_BLACK_LEVEL_LOCK_GREEN (1 << 14) +#define MT9T001_RED_OFFSET 0x63 +#define MT9T001_BLUE_OFFSET 0x64 + +struct mt9t001 { + struct v4l2_subdev subdev; + struct media_pad pad; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *gains[4]; + + u16 output_control; + u16 black_level; +}; + +static inline struct mt9t001 *to_mt9t001(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9t001, subdev); +} + +static int mt9t001_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_swapped(client, reg); +} + +static int mt9t001_write(struct i2c_client *client, u8 reg, u16 data) +{ + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear, + u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev); + u16 value = (mt9t001->output_control & ~clear) | set; + int ret; + + if (value == mt9t001->output_control) + return 0; + + ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, value); + if (ret < 0) + return ret; + + mt9t001->output_control = value; + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static struct v4l2_mbus_framefmt * +__mt9t001_get_pad_format(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9t001->format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__mt9t001_get_pad_crop(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9t001->crop; + default: + return NULL; + } +} + +static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable) +{ + const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE; + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + struct v4l2_mbus_framefmt *format = &mt9t001->format; + struct v4l2_rect *crop = &mt9t001->crop; + unsigned int hratio; + unsigned int vratio; + int ret; + + if (!enable) + return mt9t001_set_output_control(mt9t001, mode, 0); + + /* Configure the window size and row/column bin */ + hratio = DIV_ROUND_CLOSEST(crop->width, format->width); + vratio = DIV_ROUND_CLOSEST(crop->height, format->height); + + ret = mt9t001_write(client, MT9T001_ROW_ADDRESS_MODE, hratio - 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_COLUMN_ADDRESS_MODE, vratio - 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_COLUMN_START, crop->left); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_ROW_START, crop->top); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_WINDOW_WIDTH, crop->width - 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_WINDOW_HEIGHT, crop->height - 1); + if (ret < 0) + return ret; + + /* Switch to master "normal" mode */ + return mt9t001_set_output_control(mt9t001, 0, mode); +} + +static int mt9t001_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_SGRBG10_1X10; + return 0; +} + +static int mt9t001_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10) + return -EINVAL; + + fse->min_width = (MT9T001_WINDOW_WIDTH_DEF + 1) / fse->index; + fse->max_width = fse->min_width; + fse->min_height = (MT9T001_WINDOW_HEIGHT_DEF + 1) / fse->index; + fse->max_height = fse->min_height; + + return 0; +} + +static int mt9t001_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + + format->format = *__mt9t001_get_pad_format(mt9t001, fh, format->pad, + format->which); + return 0; +} + +static int mt9t001_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + __crop = __mt9t001_get_pad_crop(mt9t001, fh, format->pad, + format->which); + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + max(__crop->width / 8, MT9T001_WINDOW_HEIGHT_MIN + 1), + __crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + max(__crop->height / 8, MT9T001_WINDOW_HEIGHT_MIN + 1), + __crop->height); + + hratio = DIV_ROUND_CLOSEST(__crop->width, width); + vratio = DIV_ROUND_CLOSEST(__crop->height, height); + + __format = __mt9t001_get_pad_format(mt9t001, fh, format->pad, + format->which); + __format->width = __crop->width / hratio; + __format->height = __crop->height / vratio; + + format->format = *__format; + + return 0; +} + +static int mt9t001_get_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + + crop->rect = *__mt9t001_get_pad_crop(mt9t001, fh, crop->pad, + crop->which); + return 0; +} + +static int mt9t001_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + /* Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels. + */ + rect.left = clamp(ALIGN(crop->rect.left, 2), + MT9T001_COLUMN_START_MIN, + MT9T001_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top, 2), + MT9T001_ROW_START_MIN, + MT9T001_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), + MT9T001_WINDOW_WIDTH_MIN + 1, + MT9T001_WINDOW_WIDTH_MAX + 1); + rect.height = clamp(ALIGN(crop->rect.height, 2), + MT9T001_WINDOW_HEIGHT_MIN + 1, + MT9T001_WINDOW_HEIGHT_MAX + 1); + + rect.width = min(rect.width, MT9T001_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9T001_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9t001_get_pad_crop(mt9t001, fh, crop->pad, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + __format = __mt9t001_get_pad_format(mt9t001, fh, crop->pad, + crop->which); + __format->width = rect.width; + __format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +#define V4L2_CID_TEST_PATTERN (V4L2_CID_USER_BASE | 0x1001) +#define V4L2_CID_BLACK_LEVEL_AUTO (V4L2_CID_USER_BASE | 0x1002) +#define V4L2_CID_BLACK_LEVEL_OFFSET (V4L2_CID_USER_BASE | 0x1003) +#define V4L2_CID_BLACK_LEVEL_CALIBRATE (V4L2_CID_USER_BASE | 0x1004) + +#define V4L2_CID_GAIN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1001) +#define V4L2_CID_GAIN_GREEN_RED (V4L2_CTRL_CLASS_CAMERA | 0x1002) +#define V4L2_CID_GAIN_GREEN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1003) +#define V4L2_CID_GAIN_BLUE (V4L2_CTRL_CLASS_CAMERA | 0x1004) + +static u16 mt9t001_gain_value(s32 *gain) +{ + /* Gain is controlled by 2 analog stages and a digital stage. Valid + * values for the 3 stages are + * + * Stage Min Max Step + * ------------------------------------------ + * First analog stage x1 x2 1 + * Second analog stage x1 x4 0.125 + * Digital stage x1 x16 0.125 + * + * To minimize noise, the gain stages should be used in the second + * analog stage, first analog stage, digital stage order. Gain from a + * previous stage should be pushed to its maximum value before the next + * stage is used. + */ + if (*gain <= 32) + return *gain; + + if (*gain <= 64) { + *gain &= ~1; + return (1 << 6) | (*gain >> 1); + } + + *gain &= ~7; + return ((*gain - 64) << 5) | (1 << 6) | 32; +} + +static int mt9t001_ctrl_freeze(struct mt9t001 *mt9t001, bool freeze) +{ + return mt9t001_set_output_control(mt9t001, + freeze ? 0 : MT9T001_OUTPUT_CONTROL_SYNC, + freeze ? MT9T001_OUTPUT_CONTROL_SYNC : 0); +} + +static int mt9t001_s_ctrl(struct v4l2_ctrl *ctrl) +{ + static const u8 gains[4] = { + MT9T001_RED_GAIN, MT9T001_GREEN1_GAIN, + MT9T001_GREEN2_GAIN, MT9T001_BLUE_GAIN + }; + + struct mt9t001 *mt9t001 = + container_of(ctrl->handler, struct mt9t001, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev); + unsigned int count; + unsigned int i; + u16 value; + int ret; + + switch (ctrl->id) { + case V4L2_CID_GAIN_RED: + case V4L2_CID_GAIN_GREEN_RED: + case V4L2_CID_GAIN_GREEN_BLUE: + case V4L2_CID_GAIN_BLUE: + + /* Disable control updates if more than one control has changed + * in the cluster. + */ + for (i = 0, count = 0; i < 4; ++i) { + struct v4l2_ctrl *gain = mt9t001->gains[i]; + + if (gain->val != gain->cur.val) + count++; + } + + if (count > 1) { + ret = mt9t001_ctrl_freeze(mt9t001, true); + if (ret < 0) + return ret; + } + + /* Update the gain controls. */ + for (i = 0; i < 4; ++i) { + struct v4l2_ctrl *gain = mt9t001->gains[i]; + + if (gain->val == gain->cur.val) + continue; + + value = mt9t001_gain_value(&gain->val); + ret = mt9t001_write(client, gains[i], value); + if (ret < 0) { + mt9t001_ctrl_freeze(mt9t001, false); + return ret; + } + } + + /* Enable control updates. */ + if (count > 1) { + ret = mt9t001_ctrl_freeze(mt9t001, false); + if (ret < 0) + return ret; + } + + break; + + case V4L2_CID_EXPOSURE: + ret = mt9t001_write(client, MT9T001_SHUTTER_WIDTH_LOW, + ctrl->val & 0xffff); + if (ret < 0) + return ret; + + return mt9t001_write(client, MT9T001_SHUTTER_WIDTH_HIGH, + ctrl->val >> 16); + + case V4L2_CID_TEST_PATTERN: + ret = mt9t001_set_output_control(mt9t001, + ctrl->val ? 0 : MT9T001_OUTPUT_CONTROL_TEST_DATA, + ctrl->val ? MT9T001_OUTPUT_CONTROL_TEST_DATA : 0); + if (ret < 0) + return ret; + + return mt9t001_write(client, MT9T001_TEST_DATA, ctrl->val << 2); + + case V4L2_CID_BLACK_LEVEL_AUTO: + value = ctrl->val ? 0 : MT9T001_BLACK_LEVEL_OVERRIDE; + ret = mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION, + value); + if (ret < 0) + return ret; + + mt9t001->black_level = value; + break; + + case V4L2_CID_BLACK_LEVEL_OFFSET: + ret = mt9t001_write(client, MT9T001_GREEN1_OFFSET, ctrl->val); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_GREEN2_OFFSET, ctrl->val); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_RED_OFFSET, ctrl->val); + if (ret < 0) + return ret; + + return mt9t001_write(client, MT9T001_BLUE_OFFSET, ctrl->val); + + case V4L2_CID_BLACK_LEVEL_CALIBRATE: + return mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION, + MT9T001_BLACK_LEVEL_RECALCULATE | + mt9t001->black_level); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9t001_ctrl_ops = { + .s_ctrl = mt9t001_s_ctrl, +}; + +static const struct v4l2_ctrl_config mt9t001_ctrls[] = { + { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_TEST_PATTERN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Test pattern", + .min = 0, + .max = 1023, + .step = 1, + .def = 0, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_BLACK_LEVEL_AUTO, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Black Level, Auto", + .min = 0, + .max = 1, + .step = 1, + .def = 1, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_BLACK_LEVEL_OFFSET, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Black Level, Offset", + .min = -256, + .max = 255, + .step = 1, + .def = 32, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_BLACK_LEVEL_CALIBRATE, + .type = V4L2_CTRL_TYPE_BUTTON, + .name = "Black Level, Calibrate", + .min = 0, + .max = 0, + .step = 0, + .def = 0, + .flags = V4L2_CTRL_FLAG_WRITE_ONLY, + }, +}; + +static const struct v4l2_ctrl_config mt9t001_gains[] = { + { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_RED, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Red", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_GREEN_RED, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Green (R)", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_GREEN_BLUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Green (B)", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, { + .ops = &mt9t001_ctrl_ops, + .id = V4L2_CID_GAIN_BLUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Blue", + .min = MT9T001_GLOBAL_GAIN_MIN, + .max = MT9T001_GLOBAL_GAIN_MAX, + .step = 1, + .def = MT9T001_GLOBAL_GAIN_MIN, + .flags = 0, + }, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_try_crop(fh, 0); + crop->left = MT9T001_COLUMN_START_DEF; + crop->top = MT9T001_ROW_START_DEF; + crop->width = MT9T001_WINDOW_WIDTH_DEF + 1; + crop->height = MT9T001_WINDOW_HEIGHT_DEF + 1; + + format = v4l2_subdev_get_try_format(fh, 0); + format->code = V4L2_MBUS_FMT_SGRBG10_1X10; + format->width = MT9T001_WINDOW_WIDTH_DEF + 1; + format->height = MT9T001_WINDOW_HEIGHT_DEF + 1; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = { + .s_stream = mt9t001_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = { + .enum_mbus_code = mt9t001_enum_mbus_code, + .enum_frame_size = mt9t001_enum_frame_size, + .get_fmt = mt9t001_get_format, + .set_fmt = mt9t001_set_format, + .get_crop = mt9t001_get_crop, + .set_crop = mt9t001_set_crop, +}; + +static struct v4l2_subdev_ops mt9t001_subdev_ops = { + .video = &mt9t001_subdev_video_ops, + .pad = &mt9t001_subdev_pad_ops, +}; + +static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = { + .open = mt9t001_open, +}; + +static int mt9t001_video_probe(struct i2c_client *client) +{ + struct mt9t001_platform_data *pdata = client->dev.platform_data; + s32 data; + int ret; + + dev_info(&client->dev, "Probing MT9T001 at address 0x%02x\n", + client->addr); + + /* Reset the chip and stop data read out */ + ret = mt9t001_write(client, MT9T001_RESET, 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_RESET, 0); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, 0); + if (ret < 0) + return ret; + + /* Configure the pixel clock polarity */ + if (pdata->clk_pol) { + ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK, + MT9T001_PIXEL_CLOCK_INVERT); + if (ret < 0) + return ret; + } + + /* Read and check the sensor version */ + data = mt9t001_read(client, MT9T001_CHIP_VERSION); + if (data != MT9T001_CHIP_ID) { + dev_err(&client->dev, "MT9T001 not detected, wrong version " + "0x%04x\n", data); + return -ENODEV; + } + + dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n", + client->addr); + + return ret; +} + +static int mt9t001_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9t001_platform_data *pdata = client->dev.platform_data; + struct mt9t001 *mt9t001; + unsigned int i; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + ret = mt9t001_video_probe(client); + if (ret < 0) + return ret; + + mt9t001 = kzalloc(sizeof(*mt9t001), GFP_KERNEL); + if (!mt9t001) + return -ENOMEM; + + v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) + + ARRAY_SIZE(mt9t001_gains) + 3); + + v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_EXPOSURE, MT9T001_SHUTTER_WIDTH_MIN, + MT9T001_SHUTTER_WIDTH_MAX, 1, + MT9T001_SHUTTER_WIDTH_DEF); + v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_BLACK_LEVEL, 1, 1, 1, 1); + v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops, + V4L2_CID_PIXEL_RATE, pdata->ext_clk, pdata->ext_clk, + 1, pdata->ext_clk); + + for (i = 0; i < ARRAY_SIZE(mt9t001_ctrls); ++i) + v4l2_ctrl_new_custom(&mt9t001->ctrls, &mt9t001_ctrls[i], NULL); + + for (i = 0; i < ARRAY_SIZE(mt9t001_gains); ++i) + mt9t001->gains[i] = v4l2_ctrl_new_custom(&mt9t001->ctrls, + &mt9t001_gains[i], NULL); + + v4l2_ctrl_cluster(ARRAY_SIZE(mt9t001_gains), mt9t001->gains); + + mt9t001->subdev.ctrl_handler = &mt9t001->ctrls; + + if (mt9t001->ctrls.error) { + printk(KERN_INFO "%s: control initialization error %d\n", + __func__, mt9t001->ctrls.error); + ret = -EINVAL; + goto done; + } + + mt9t001->crop.left = MT9T001_COLUMN_START_DEF; + mt9t001->crop.top = MT9T001_ROW_START_DEF; + mt9t001->crop.width = MT9T001_WINDOW_WIDTH_DEF + 1; + mt9t001->crop.height = MT9T001_WINDOW_HEIGHT_DEF + 1; + + mt9t001->format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + mt9t001->format.width = MT9T001_WINDOW_WIDTH_DEF + 1; + mt9t001->format.height = MT9T001_WINDOW_HEIGHT_DEF + 1; + mt9t001->format.field = V4L2_FIELD_NONE; + mt9t001->format.colorspace = V4L2_COLORSPACE_SRGB; + + v4l2_i2c_subdev_init(&mt9t001->subdev, client, &mt9t001_subdev_ops); + mt9t001->subdev.internal_ops = &mt9t001_subdev_internal_ops; + mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad, 0); + +done: + if (ret < 0) { + v4l2_ctrl_handler_free(&mt9t001->ctrls); + media_entity_cleanup(&mt9t001->subdev.entity); + kfree(mt9t001); + } + + return ret; +} + +static int mt9t001_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + + v4l2_ctrl_handler_free(&mt9t001->ctrls); + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + kfree(mt9t001); + return 0; +} + +static const struct i2c_device_id mt9t001_id[] = { + { "mt9t001", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9t001_id); + +static struct i2c_driver mt9t001_driver = { + .driver = { + .name = "mt9t001", + }, + .probe = mt9t001_probe, + .remove = mt9t001_remove, + .id_table = mt9t001_id, +}; + +module_i2c_driver(mt9t001_driver); + +MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/mt9v011.c b/drivers/media/i2c/mt9v011.c new file mode 100644 index 000000000000..6bf01ad62765 --- /dev/null +++ b/drivers/media/i2c/mt9v011.c @@ -0,0 +1,712 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <asm/div64.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/mt9v011.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8232 +#define MT9V011_REV_B_VERSION 0x8243 + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 12) - 1 - 0x0020, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 2047, + .step = 1, + .default_value = 0x01fc, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + } +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + unsigned xtal; + unsigned hflip:1; + unsigned vflip:1; + + u16 global_gain, exposure; + s16 red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + + { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ +}; + + +static u16 calc_mt9v011_gain(s16 lineargain) +{ + + u16 digitalgain = 0; + u16 analogmult = 0; + u16 analoginit = 0; + + if (lineargain < 0) + lineargain = 0; + + /* recommended minimum */ + lineargain += 0x0020; + + if (lineargain > 2047) + lineargain = 2047; + + if (lineargain > 1023) { + digitalgain = 3; + analogmult = 3; + analoginit = lineargain / 16; + } else if (lineargain > 511) { + digitalgain = 1; + analogmult = 3; + analoginit = lineargain / 8; + } else if (lineargain > 255) { + analogmult = 3; + analoginit = lineargain / 4; + } else if (lineargain > 127) { + analogmult = 1; + analoginit = lineargain / 2; + } else + analoginit = lineargain; + + return analoginit + (analogmult << 7) + (digitalgain << 9); + +} + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green_gain, blue_gain, red_gain; + u16 exposure; + s16 bal; + + exposure = core->exposure; + + green_gain = calc_mt9v011_gain(core->global_gain); + + bal = core->global_gain; + bal += (core->blue_bal * core->global_gain / (1 << 7)); + blue_gain = calc_mt9v011_gain(bal); + + bal = core->global_gain; + bal += (core->red_bal * core->global_gain / (1 << 7)); + red_gain = calc_mt9v011_gain(bal); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); + mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure); +} + +static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank, speed; + unsigned row_time, t_time; + u64 frames_per_ms; + unsigned tmp; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED); + + row_time = (width + 113 + hblank) * (speed + 2); + t_time = row_time * (height + vblank + 1); + + frames_per_ms = core->xtal * 1000l; + do_div(frames_per_ms, t_time); + tmp = frames_per_ms; + + v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n", + tmp / 1000, tmp % 1000, t_time); + + if (numerator && denominator) { + *numerator = 1000; + *denominator = (u32)frames_per_ms; + } +} + +static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank; + unsigned row_time, line_time; + u64 t_time, speed; + + /* Avoid bogus calculus */ + if (!numerator || !denominator) + return 0; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + + row_time = width + 113 + hblank; + line_time = height + vblank + 1; + + t_time = core->xtal * ((u64)numerator); + /* round to the closest value */ + t_time += denominator / 2; + do_div(t_time, denominator); + + speed = t_time; + do_div(speed, row_time * line_time); + + /* Avoid having a negative value for speed */ + if (speed < 2) + speed = 0; + else + speed -= 2; + + /* Avoid speed overflow */ + if (speed > 15) + return 15; + + return (u16)speed; +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 20 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (480 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); + + calc_fps(sd, NULL, NULL); +}; + +static void set_read_mode(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned mode = 0x1000; + + if (core->hflip) + mode |= 0x4000; + + if (core->vflip) + mode |= 0x8000; + + mt9v011_write(sd, R20_MT9V011_READ_MODE, mode); +} + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + set_read_mode(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_EXPOSURE: + ctrl->value = core->exposure; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + case V4L2_CID_HFLIP: + ctrl->value = core->hflip ? 1 : 0; + return 0; + case V4L2_CID_VFLIP: + ctrl->value = core->vflip ? 1 : 0; + return 0; + } + return -EINVAL; +} + +static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) +{ + int i; + + v4l2_dbg(1, debug, sd, "queryctrl called\n"); + + for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++) + if (qc->id && qc->id == mt9v011_qctrl[i].id) { + memcpy(qc, &(mt9v011_qctrl[i]), + sizeof(*qc)); + return 0; + } + + return -EINVAL; +} + + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_EXPOSURE: + core->exposure = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + case V4L2_CID_HFLIP: + core->hflip = ctrl->value; + set_read_mode(sd); + return 0; + case V4L2_CID_VFLIP: + core->vflip = ctrl->value; + set_read_mode(sd); + return 0; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index > 0) + return -EINVAL; + + *code = V4L2_MBUS_FMT_SGRBG8_1X8; + return 0; +} + +static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8) + return -EINVAL; + + v4l_bound_align_image(&fmt->width, 48, 639, 1, + &fmt->height, 32, 480, 1, 0); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(struct v4l2_captureparm)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + calc_fps(sd, + &cp->timeperframe.numerator, + &cp->timeperframe.denominator); + + return 0; +} + +static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + u16 speed; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + speed = calc_speed(sd, tpf->numerator, tpf->denominator); + + mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed); + v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed); + + /* Recalculate and update fps info */ + calc_fps(sd, &tpf->numerator, &tpf->denominator); + + return 0; +} + +static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_mbus_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = fmt->width; + core->height = fmt->height; + + set_res(sd); + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + u16 version; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + version); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .queryctrl = mt9v011_queryctrl, + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_mbus_fmt = mt9v011_enum_mbus_fmt, + .try_mbus_fmt = mt9v011_try_mbus_fmt, + .s_mbus_fmt = mt9v011_s_mbus_fmt, + .g_parm = mt9v011_g_parm, + .s_parm = mt9v011_s_parm, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if ((version != MT9V011_VERSION) && + (version != MT9V011_REV_B_VERSION)) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->exposure = 0x01fc; + core->width = 640; + core->height = 480; + core->xtal = 27000000; /* Hz */ + + if (c->dev.platform_data) { + struct mt9v011_platform_data *pdata = c->dev.platform_data; + + core->xtal = pdata->xtal; + v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", + core->xtal / 1000000, (core->xtal / 1000) % 1000); + } + + v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n", + c->addr << 1, c->adapter->name, version); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +static struct i2c_driver mt9v011_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "mt9v011", + }, + .probe = mt9v011_probe, + .remove = mt9v011_remove, + .id_table = mt9v011_id, +}; + +module_i2c_driver(mt9v011_driver); diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c new file mode 100644 index 000000000000..4ba4884c016e --- /dev/null +++ b/drivers/media/i2c/mt9v032.c @@ -0,0 +1,763 @@ +/* + * Driver for MT9V032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010, Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * Based on the MT9M001 driver, + * + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/v4l2-mediabus.h> +#include <linux/module.h> + +#include <media/mt9v032.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#define MT9V032_PIXEL_ARRAY_HEIGHT 492 +#define MT9V032_PIXEL_ARRAY_WIDTH 782 + +#define MT9V032_CHIP_VERSION 0x00 +#define MT9V032_CHIP_ID_REV1 0x1311 +#define MT9V032_CHIP_ID_REV3 0x1313 +#define MT9V032_COLUMN_START 0x01 +#define MT9V032_COLUMN_START_MIN 1 +#define MT9V032_COLUMN_START_DEF 1 +#define MT9V032_COLUMN_START_MAX 752 +#define MT9V032_ROW_START 0x02 +#define MT9V032_ROW_START_MIN 4 +#define MT9V032_ROW_START_DEF 5 +#define MT9V032_ROW_START_MAX 482 +#define MT9V032_WINDOW_HEIGHT 0x03 +#define MT9V032_WINDOW_HEIGHT_MIN 1 +#define MT9V032_WINDOW_HEIGHT_DEF 480 +#define MT9V032_WINDOW_HEIGHT_MAX 480 +#define MT9V032_WINDOW_WIDTH 0x04 +#define MT9V032_WINDOW_WIDTH_MIN 1 +#define MT9V032_WINDOW_WIDTH_DEF 752 +#define MT9V032_WINDOW_WIDTH_MAX 752 +#define MT9V032_HORIZONTAL_BLANKING 0x05 +#define MT9V032_HORIZONTAL_BLANKING_MIN 43 +#define MT9V032_HORIZONTAL_BLANKING_MAX 1023 +#define MT9V032_VERTICAL_BLANKING 0x06 +#define MT9V032_VERTICAL_BLANKING_MIN 4 +#define MT9V032_VERTICAL_BLANKING_MAX 3000 +#define MT9V032_CHIP_CONTROL 0x07 +#define MT9V032_CHIP_CONTROL_MASTER_MODE (1 << 3) +#define MT9V032_CHIP_CONTROL_DOUT_ENABLE (1 << 7) +#define MT9V032_CHIP_CONTROL_SEQUENTIAL (1 << 8) +#define MT9V032_SHUTTER_WIDTH1 0x08 +#define MT9V032_SHUTTER_WIDTH2 0x09 +#define MT9V032_SHUTTER_WIDTH_CONTROL 0x0a +#define MT9V032_TOTAL_SHUTTER_WIDTH 0x0b +#define MT9V032_TOTAL_SHUTTER_WIDTH_MIN 1 +#define MT9V032_TOTAL_SHUTTER_WIDTH_DEF 480 +#define MT9V032_TOTAL_SHUTTER_WIDTH_MAX 32767 +#define MT9V032_RESET 0x0c +#define MT9V032_READ_MODE 0x0d +#define MT9V032_READ_MODE_ROW_BIN_MASK (3 << 0) +#define MT9V032_READ_MODE_ROW_BIN_SHIFT 0 +#define MT9V032_READ_MODE_COLUMN_BIN_MASK (3 << 2) +#define MT9V032_READ_MODE_COLUMN_BIN_SHIFT 2 +#define MT9V032_READ_MODE_ROW_FLIP (1 << 4) +#define MT9V032_READ_MODE_COLUMN_FLIP (1 << 5) +#define MT9V032_READ_MODE_DARK_COLUMNS (1 << 6) +#define MT9V032_READ_MODE_DARK_ROWS (1 << 7) +#define MT9V032_PIXEL_OPERATION_MODE 0x0f +#define MT9V032_PIXEL_OPERATION_MODE_COLOR (1 << 2) +#define MT9V032_PIXEL_OPERATION_MODE_HDR (1 << 6) +#define MT9V032_ANALOG_GAIN 0x35 +#define MT9V032_ANALOG_GAIN_MIN 16 +#define MT9V032_ANALOG_GAIN_DEF 16 +#define MT9V032_ANALOG_GAIN_MAX 64 +#define MT9V032_MAX_ANALOG_GAIN 0x36 +#define MT9V032_MAX_ANALOG_GAIN_MAX 127 +#define MT9V032_FRAME_DARK_AVERAGE 0x42 +#define MT9V032_DARK_AVG_THRESH 0x46 +#define MT9V032_DARK_AVG_LOW_THRESH_MASK (255 << 0) +#define MT9V032_DARK_AVG_LOW_THRESH_SHIFT 0 +#define MT9V032_DARK_AVG_HIGH_THRESH_MASK (255 << 8) +#define MT9V032_DARK_AVG_HIGH_THRESH_SHIFT 8 +#define MT9V032_ROW_NOISE_CORR_CONTROL 0x70 +#define MT9V032_ROW_NOISE_CORR_ENABLE (1 << 5) +#define MT9V032_ROW_NOISE_CORR_USE_BLK_AVG (1 << 7) +#define MT9V032_PIXEL_CLOCK 0x74 +#define MT9V032_PIXEL_CLOCK_INV_LINE (1 << 0) +#define MT9V032_PIXEL_CLOCK_INV_FRAME (1 << 1) +#define MT9V032_PIXEL_CLOCK_XOR_LINE (1 << 2) +#define MT9V032_PIXEL_CLOCK_CONT_LINE (1 << 3) +#define MT9V032_PIXEL_CLOCK_INV_PXL_CLK (1 << 4) +#define MT9V032_TEST_PATTERN 0x7f +#define MT9V032_TEST_PATTERN_DATA_MASK (1023 << 0) +#define MT9V032_TEST_PATTERN_DATA_SHIFT 0 +#define MT9V032_TEST_PATTERN_USE_DATA (1 << 10) +#define MT9V032_TEST_PATTERN_GRAY_MASK (3 << 11) +#define MT9V032_TEST_PATTERN_GRAY_NONE (0 << 11) +#define MT9V032_TEST_PATTERN_GRAY_VERTICAL (1 << 11) +#define MT9V032_TEST_PATTERN_GRAY_HORIZONTAL (2 << 11) +#define MT9V032_TEST_PATTERN_GRAY_DIAGONAL (3 << 11) +#define MT9V032_TEST_PATTERN_ENABLE (1 << 13) +#define MT9V032_TEST_PATTERN_FLIP (1 << 14) +#define MT9V032_AEC_AGC_ENABLE 0xaf +#define MT9V032_AEC_ENABLE (1 << 0) +#define MT9V032_AGC_ENABLE (1 << 1) +#define MT9V032_THERMAL_INFO 0xc1 + +struct mt9v032 { + struct v4l2_subdev subdev; + struct media_pad pad; + + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + + struct v4l2_ctrl_handler ctrls; + + struct mutex power_lock; + int power_count; + + struct mt9v032_platform_data *pdata; + u16 chip_control; + u16 aec_agc; +}; + +static struct mt9v032 *to_mt9v032(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v032, subdev); +} + +static int mt9v032_read(struct i2c_client *client, const u8 reg) +{ + s32 data = i2c_smbus_read_word_swapped(client, reg); + dev_dbg(&client->dev, "%s: read 0x%04x from 0x%02x\n", __func__, + data, reg); + return data; +} + +static int mt9v032_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + dev_dbg(&client->dev, "%s: writing 0x%04x to 0x%02x\n", __func__, + data, reg); + return i2c_smbus_write_word_swapped(client, reg, data); +} + +static int mt9v032_set_chip_control(struct mt9v032 *mt9v032, u16 clear, u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u16 value = (mt9v032->chip_control & ~clear) | set; + int ret; + + ret = mt9v032_write(client, MT9V032_CHIP_CONTROL, value); + if (ret < 0) + return ret; + + mt9v032->chip_control = value; + return 0; +} + +static int +mt9v032_update_aec_agc(struct mt9v032 *mt9v032, u16 which, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u16 value = mt9v032->aec_agc; + int ret; + + if (enable) + value |= which; + else + value &= ~which; + + ret = mt9v032_write(client, MT9V032_AEC_AGC_ENABLE, value); + if (ret < 0) + return ret; + + mt9v032->aec_agc = value; + return 0; +} + +static int mt9v032_power_on(struct mt9v032 *mt9v032) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + int ret; + + if (mt9v032->pdata->set_clock) { + mt9v032->pdata->set_clock(&mt9v032->subdev, 25000000); + udelay(1); + } + + /* Reset the chip and stop data read out */ + ret = mt9v032_write(client, MT9V032_RESET, 1); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_RESET, 0); + if (ret < 0) + return ret; + + return mt9v032_write(client, MT9V032_CHIP_CONTROL, 0); +} + +static void mt9v032_power_off(struct mt9v032 *mt9v032) +{ + if (mt9v032->pdata->set_clock) + mt9v032->pdata->set_clock(&mt9v032->subdev, 0); +} + +static int __mt9v032_set_power(struct mt9v032 *mt9v032, bool on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + int ret; + + if (!on) { + mt9v032_power_off(mt9v032); + return 0; + } + + ret = mt9v032_power_on(mt9v032); + if (ret < 0) + return ret; + + /* Configure the pixel clock polarity */ + if (mt9v032->pdata && mt9v032->pdata->clk_pol) { + ret = mt9v032_write(client, MT9V032_PIXEL_CLOCK, + MT9V032_PIXEL_CLOCK_INV_PXL_CLK); + if (ret < 0) + return ret; + } + + /* Disable the noise correction algorithm and restore the controls. */ + ret = mt9v032_write(client, MT9V032_ROW_NOISE_CORR_CONTROL, 0); + if (ret < 0) + return ret; + + return v4l2_ctrl_handler_setup(&mt9v032->ctrls); +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static struct v4l2_mbus_framefmt * +__mt9v032_get_pad_format(struct mt9v032 *mt9v032, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9v032->format; + default: + return NULL; + } +} + +static struct v4l2_rect * +__mt9v032_get_pad_crop(struct mt9v032 *mt9v032, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9v032->crop; + default: + return NULL; + } +} + +static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable) +{ + const u16 mode = MT9V032_CHIP_CONTROL_MASTER_MODE + | MT9V032_CHIP_CONTROL_DOUT_ENABLE + | MT9V032_CHIP_CONTROL_SEQUENTIAL; + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + struct v4l2_mbus_framefmt *format = &mt9v032->format; + struct v4l2_rect *crop = &mt9v032->crop; + unsigned int hratio; + unsigned int vratio; + int ret; + + if (!enable) + return mt9v032_set_chip_control(mt9v032, mode, 0); + + /* Configure the window size and row/column bin */ + hratio = DIV_ROUND_CLOSEST(crop->width, format->width); + vratio = DIV_ROUND_CLOSEST(crop->height, format->height); + + ret = mt9v032_write(client, MT9V032_READ_MODE, + (hratio - 1) << MT9V032_READ_MODE_ROW_BIN_SHIFT | + (vratio - 1) << MT9V032_READ_MODE_COLUMN_BIN_SHIFT); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_COLUMN_START, crop->left); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_ROW_START, crop->top); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_WINDOW_WIDTH, crop->width); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_WINDOW_HEIGHT, crop->height); + if (ret < 0) + return ret; + + ret = mt9v032_write(client, MT9V032_HORIZONTAL_BLANKING, + max(43, 660 - crop->width)); + if (ret < 0) + return ret; + + /* Switch to master "normal" mode */ + return mt9v032_set_chip_control(mt9v032, 0, mode); +} + +static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + code->code = V4L2_MBUS_FMT_SGRBG10_1X10; + return 0; +} + +static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10) + return -EINVAL; + + fse->min_width = MT9V032_WINDOW_WIDTH_DEF / fse->index; + fse->max_width = fse->min_width; + fse->min_height = MT9V032_WINDOW_HEIGHT_DEF / fse->index; + fse->max_height = fse->min_height; + + return 0; +} + +static int mt9v032_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + format->format = *__mt9v032_get_pad_format(mt9v032, fh, format->pad, + format->which); + return 0; +} + +static int mt9v032_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + __crop = __mt9v032_get_pad_crop(mt9v032, fh, format->pad, + format->which); + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, ALIGN(format->format.width, 2), + max(__crop->width / 8, MT9V032_WINDOW_WIDTH_MIN), + __crop->width); + height = clamp_t(unsigned int, ALIGN(format->format.height, 2), + max(__crop->height / 8, MT9V032_WINDOW_HEIGHT_MIN), + __crop->height); + + hratio = DIV_ROUND_CLOSEST(__crop->width, width); + vratio = DIV_ROUND_CLOSEST(__crop->height, height); + + __format = __mt9v032_get_pad_format(mt9v032, fh, format->pad, + format->which); + __format->width = __crop->width / hratio; + __format->height = __crop->height / vratio; + + format->format = *__format; + + return 0; +} + +static int mt9v032_get_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + crop->rect = *__mt9v032_get_pad_crop(mt9v032, fh, crop->pad, + crop->which); + return 0; +} + +static int mt9v032_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + struct v4l2_rect rect; + + /* Clamp the crop rectangle boundaries and align them to a non multiple + * of 2 pixels to ensure a GRBG Bayer pattern. + */ + rect.left = clamp(ALIGN(crop->rect.left + 1, 2) - 1, + MT9V032_COLUMN_START_MIN, + MT9V032_COLUMN_START_MAX); + rect.top = clamp(ALIGN(crop->rect.top + 1, 2) - 1, + MT9V032_ROW_START_MIN, + MT9V032_ROW_START_MAX); + rect.width = clamp(ALIGN(crop->rect.width, 2), + MT9V032_WINDOW_WIDTH_MIN, + MT9V032_WINDOW_WIDTH_MAX); + rect.height = clamp(ALIGN(crop->rect.height, 2), + MT9V032_WINDOW_HEIGHT_MIN, + MT9V032_WINDOW_HEIGHT_MAX); + + rect.width = min(rect.width, MT9V032_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min(rect.height, MT9V032_PIXEL_ARRAY_HEIGHT - rect.top); + + __crop = __mt9v032_get_pad_crop(mt9v032, fh, crop->pad, crop->which); + + if (rect.width != __crop->width || rect.height != __crop->height) { + /* Reset the output image size if the crop rectangle size has + * been modified. + */ + __format = __mt9v032_get_pad_format(mt9v032, fh, crop->pad, + crop->which); + __format->width = rect.width; + __format->height = rect.height; + } + + *__crop = rect; + crop->rect = rect; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev control operations + */ + +#define V4L2_CID_TEST_PATTERN (V4L2_CID_USER_BASE | 0x1001) + +static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9v032 *mt9v032 = + container_of(ctrl->handler, struct mt9v032, ctrls); + struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev); + u16 data; + + switch (ctrl->id) { + case V4L2_CID_AUTOGAIN: + return mt9v032_update_aec_agc(mt9v032, MT9V032_AGC_ENABLE, + ctrl->val); + + case V4L2_CID_GAIN: + return mt9v032_write(client, MT9V032_ANALOG_GAIN, ctrl->val); + + case V4L2_CID_EXPOSURE_AUTO: + return mt9v032_update_aec_agc(mt9v032, MT9V032_AEC_ENABLE, + !ctrl->val); + + case V4L2_CID_EXPOSURE: + return mt9v032_write(client, MT9V032_TOTAL_SHUTTER_WIDTH, + ctrl->val); + + case V4L2_CID_TEST_PATTERN: + switch (ctrl->val) { + case 0: + data = 0; + break; + case 1: + data = MT9V032_TEST_PATTERN_GRAY_VERTICAL + | MT9V032_TEST_PATTERN_ENABLE; + break; + case 2: + data = MT9V032_TEST_PATTERN_GRAY_HORIZONTAL + | MT9V032_TEST_PATTERN_ENABLE; + break; + case 3: + data = MT9V032_TEST_PATTERN_GRAY_DIAGONAL + | MT9V032_TEST_PATTERN_ENABLE; + break; + default: + data = (ctrl->val << MT9V032_TEST_PATTERN_DATA_SHIFT) + | MT9V032_TEST_PATTERN_USE_DATA + | MT9V032_TEST_PATTERN_ENABLE + | MT9V032_TEST_PATTERN_FLIP; + break; + } + + return mt9v032_write(client, MT9V032_TEST_PATTERN, data); + } + + return 0; +} + +static struct v4l2_ctrl_ops mt9v032_ctrl_ops = { + .s_ctrl = mt9v032_s_ctrl, +}; + +static const struct v4l2_ctrl_config mt9v032_ctrls[] = { + { + .ops = &mt9v032_ctrl_ops, + .id = V4L2_CID_TEST_PATTERN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Test pattern", + .min = 0, + .max = 1023, + .step = 1, + .def = 0, + .flags = 0, + } +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int mt9v032_set_power(struct v4l2_subdev *subdev, int on) +{ + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + int ret = 0; + + mutex_lock(&mt9v032->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9v032->power_count == !on) { + ret = __mt9v032_set_power(mt9v032, !!on); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + mt9v032->power_count += on ? 1 : -1; + WARN_ON(mt9v032->power_count < 0); + +done: + mutex_unlock(&mt9v032->power_lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev internal operations + */ + +static int mt9v032_registered(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + s32 data; + int ret; + + dev_info(&client->dev, "Probing MT9V032 at address 0x%02x\n", + client->addr); + + ret = mt9v032_power_on(mt9v032); + if (ret < 0) { + dev_err(&client->dev, "MT9V032 power up failed\n"); + return ret; + } + + /* Read and check the sensor version */ + data = mt9v032_read(client, MT9V032_CHIP_VERSION); + if (data != MT9V032_CHIP_ID_REV1 && data != MT9V032_CHIP_ID_REV3) { + dev_err(&client->dev, "MT9V032 not detected, wrong version " + "0x%04x\n", data); + return -ENODEV; + } + + mt9v032_power_off(mt9v032); + + dev_info(&client->dev, "MT9V032 detected at address 0x%02x\n", + client->addr); + + return ret; +} + +static int mt9v032_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_try_crop(fh, 0); + crop->left = MT9V032_COLUMN_START_DEF; + crop->top = MT9V032_ROW_START_DEF; + crop->width = MT9V032_WINDOW_WIDTH_DEF; + crop->height = MT9V032_WINDOW_HEIGHT_DEF; + + format = v4l2_subdev_get_try_format(fh, 0); + format->code = V4L2_MBUS_FMT_SGRBG10_1X10; + format->width = MT9V032_WINDOW_WIDTH_DEF; + format->height = MT9V032_WINDOW_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return mt9v032_set_power(subdev, 1); +} + +static int mt9v032_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + return mt9v032_set_power(subdev, 0); +} + +static struct v4l2_subdev_core_ops mt9v032_subdev_core_ops = { + .s_power = mt9v032_set_power, +}; + +static struct v4l2_subdev_video_ops mt9v032_subdev_video_ops = { + .s_stream = mt9v032_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9v032_subdev_pad_ops = { + .enum_mbus_code = mt9v032_enum_mbus_code, + .enum_frame_size = mt9v032_enum_frame_size, + .get_fmt = mt9v032_get_format, + .set_fmt = mt9v032_set_format, + .get_crop = mt9v032_get_crop, + .set_crop = mt9v032_set_crop, +}; + +static struct v4l2_subdev_ops mt9v032_subdev_ops = { + .core = &mt9v032_subdev_core_ops, + .video = &mt9v032_subdev_video_ops, + .pad = &mt9v032_subdev_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops mt9v032_subdev_internal_ops = { + .registered = mt9v032_registered, + .open = mt9v032_open, + .close = mt9v032_close, +}; + +/* ----------------------------------------------------------------------------- + * Driver initialization and probing + */ + +static int mt9v032_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9v032 *mt9v032; + unsigned int i; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&client->adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9v032 = kzalloc(sizeof(*mt9v032), GFP_KERNEL); + if (!mt9v032) + return -ENOMEM; + + mutex_init(&mt9v032->power_lock); + mt9v032->pdata = client->dev.platform_data; + + v4l2_ctrl_handler_init(&mt9v032->ctrls, ARRAY_SIZE(mt9v032_ctrls) + 4); + + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_GAIN, MT9V032_ANALOG_GAIN_MIN, + MT9V032_ANALOG_GAIN_MAX, 1, MT9V032_ANALOG_GAIN_DEF); + v4l2_ctrl_new_std_menu(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0, + V4L2_EXPOSURE_AUTO); + v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops, + V4L2_CID_EXPOSURE, MT9V032_TOTAL_SHUTTER_WIDTH_MIN, + MT9V032_TOTAL_SHUTTER_WIDTH_MAX, 1, + MT9V032_TOTAL_SHUTTER_WIDTH_DEF); + + for (i = 0; i < ARRAY_SIZE(mt9v032_ctrls); ++i) + v4l2_ctrl_new_custom(&mt9v032->ctrls, &mt9v032_ctrls[i], NULL); + + mt9v032->subdev.ctrl_handler = &mt9v032->ctrls; + + if (mt9v032->ctrls.error) + printk(KERN_INFO "%s: control initialization error %d\n", + __func__, mt9v032->ctrls.error); + + mt9v032->crop.left = MT9V032_COLUMN_START_DEF; + mt9v032->crop.top = MT9V032_ROW_START_DEF; + mt9v032->crop.width = MT9V032_WINDOW_WIDTH_DEF; + mt9v032->crop.height = MT9V032_WINDOW_HEIGHT_DEF; + + mt9v032->format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + mt9v032->format.width = MT9V032_WINDOW_WIDTH_DEF; + mt9v032->format.height = MT9V032_WINDOW_HEIGHT_DEF; + mt9v032->format.field = V4L2_FIELD_NONE; + mt9v032->format.colorspace = V4L2_COLORSPACE_SRGB; + + mt9v032->aec_agc = MT9V032_AEC_ENABLE | MT9V032_AGC_ENABLE; + + v4l2_i2c_subdev_init(&mt9v032->subdev, client, &mt9v032_subdev_ops); + mt9v032->subdev.internal_ops = &mt9v032_subdev_internal_ops; + mt9v032->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + mt9v032->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9v032->subdev.entity, 1, &mt9v032->pad, 0); + if (ret < 0) + kfree(mt9v032); + + return ret; +} + +static int mt9v032_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct mt9v032 *mt9v032 = to_mt9v032(subdev); + + v4l2_device_unregister_subdev(subdev); + media_entity_cleanup(&subdev->entity); + kfree(mt9v032); + return 0; +} + +static const struct i2c_device_id mt9v032_id[] = { + { "mt9v032", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v032_id); + +static struct i2c_driver mt9v032_driver = { + .driver = { + .name = "mt9v032", + }, + .probe = mt9v032_probe, + .remove = mt9v032_remove, + .id_table = mt9v032_id, +}; + +module_i2c_driver(mt9v032_driver); + +MODULE_DESCRIPTION("Aptina MT9V032 Camera driver"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/noon010pc30.c b/drivers/media/i2c/noon010pc30.c new file mode 100644 index 000000000000..440c12962bae --- /dev/null +++ b/drivers/media/i2c/noon010pc30.c @@ -0,0 +1,851 @@ +/* + * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP + * + * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. + * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> + * + * Initial register configuration based on a driver authored by + * HeungJun Kim <riverful.kim@samsung.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <media/noon010pc30.h> +#include <media/v4l2-chip-ident.h> +#include <linux/videodev2.h> +#include <linux/module.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> +#include <media/v4l2-subdev.h> + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable."); + +#define MODULE_NAME "NOON010PC30" + +/* + * Register offsets within a page + * b15..b8 - page id, b7..b0 - register address + */ +#define POWER_CTRL_REG 0x0001 +#define PAGEMODE_REG 0x03 +#define DEVICE_ID_REG 0x0004 +#define NOON010PC30_ID 0x86 +#define VDO_CTL_REG(n) (0x0010 + (n)) +#define SYNC_CTL_REG 0x0012 +/* Window size and position */ +#define WIN_ROWH_REG 0x0013 +#define WIN_ROWL_REG 0x0014 +#define WIN_COLH_REG 0x0015 +#define WIN_COLL_REG 0x0016 +#define WIN_HEIGHTH_REG 0x0017 +#define WIN_HEIGHTL_REG 0x0018 +#define WIN_WIDTHH_REG 0x0019 +#define WIN_WIDTHL_REG 0x001A +#define HBLANKH_REG 0x001B +#define HBLANKL_REG 0x001C +#define VSYNCH_REG 0x001D +#define VSYNCL_REG 0x001E +/* VSYNC control */ +#define VS_CTL_REG(n) (0x00A1 + (n)) +/* page 1 */ +#define ISP_CTL_REG(n) (0x0110 + (n)) +#define YOFS_REG 0x0119 +#define DARK_YOFS_REG 0x011A +#define SAT_CTL_REG 0x0120 +#define BSAT_REG 0x0121 +#define RSAT_REG 0x0122 +/* Color correction */ +#define CMC_CTL_REG 0x0130 +#define CMC_OFSGH_REG 0x0133 +#define CMC_OFSGL_REG 0x0135 +#define CMC_SIGN_REG 0x0136 +#define CMC_GOFS_REG 0x0137 +#define CMC_COEF_REG(n) (0x0138 + (n)) +#define CMC_OFS_REG(n) (0x0141 + (n)) +/* Gamma correction */ +#define GMA_CTL_REG 0x0160 +#define GMA_COEF_REG(n) (0x0161 + (n)) +/* Lens Shading */ +#define LENS_CTRL_REG 0x01D0 +#define LENS_XCEN_REG 0x01D1 +#define LENS_YCEN_REG 0x01D2 +#define LENS_RC_REG 0x01D3 +#define LENS_GC_REG 0x01D4 +#define LENS_BC_REG 0x01D5 +#define L_AGON_REG 0x01D6 +#define L_AGOFF_REG 0x01D7 +/* Page 3 - Auto Exposure */ +#define AE_CTL_REG(n) (0x0310 + (n)) +#define AE_CTL9_REG 0x032C +#define AE_CTL10_REG 0x032D +#define AE_YLVL_REG 0x031C +#define AE_YTH_REG(n) (0x031D + (n)) +#define AE_WGT_REG 0x0326 +#define EXP_TIMEH_REG 0x0333 +#define EXP_TIMEM_REG 0x0334 +#define EXP_TIMEL_REG 0x0335 +#define EXP_MMINH_REG 0x0336 +#define EXP_MMINL_REG 0x0337 +#define EXP_MMAXH_REG 0x0338 +#define EXP_MMAXM_REG 0x0339 +#define EXP_MMAXL_REG 0x033A +/* Page 4 - Auto White Balance */ +#define AWB_CTL_REG(n) (0x0410 + (n)) +#define AWB_ENABE 0x80 +#define AWB_WGHT_REG 0x0419 +#define BGAIN_PAR_REG(n) (0x044F + (n)) +/* Manual white balance, when AWB_CTL2[0]=1 */ +#define MWB_RGAIN_REG 0x0466 +#define MWB_BGAIN_REG 0x0467 + +/* The token to mark an array end */ +#define REG_TERM 0xFFFF + +struct noon010_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u16 ispctl1_reg; +}; + +struct noon010_frmsize { + u16 width; + u16 height; + int vid_ctl1; +}; + +static const char * const noon010_supply_name[] = { + "vdd_core", "vddio", "vdda" +}; + +#define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name) + +struct noon010_info { + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES]; + u32 gpio_nreset; + u32 gpio_nstby; + + /* Protects the struct members below */ + struct mutex lock; + + const struct noon010_format *curr_fmt; + const struct noon010_frmsize *curr_win; + unsigned int apply_new_cfg:1; + unsigned int streaming:1; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int power:1; + u8 i2c_reg_page; +}; + +struct i2c_regval { + u16 addr; + u16 val; +}; + +/* Supported resolutions. */ +static const struct noon010_frmsize noon010_sizes[] = { + { + .width = 352, + .height = 288, + .vid_ctl1 = 0, + }, { + .width = 176, + .height = 144, + .vid_ctl1 = 0x10, + }, { + .width = 88, + .height = 72, + .vid_ctl1 = 0x20, + }, +}; + +/* Supported pixel formats. */ +static const struct noon010_format noon010_formats[] = { + { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x03, + }, { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x02, + }, { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0, + }, { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x01, + }, { + .code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x40, + }, +}; + +static const struct i2c_regval noon010_base_regs[] = { + { WIN_COLL_REG, 0x06 }, { HBLANKL_REG, 0x7C }, + /* Color corection and saturation */ + { ISP_CTL_REG(0), 0x30 }, { ISP_CTL_REG(2), 0x30 }, + { YOFS_REG, 0x80 }, { DARK_YOFS_REG, 0x04 }, + { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, + { CMC_CTL_REG, 0x0F }, { CMC_OFSGH_REG, 0x3C }, + { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x3F }, + { CMC_COEF_REG(0), 0x79 }, { CMC_OFS_REG(0), 0x00 }, + { CMC_COEF_REG(1), 0x39 }, { CMC_OFS_REG(1), 0x00 }, + { CMC_COEF_REG(2), 0x00 }, { CMC_OFS_REG(2), 0x00 }, + { CMC_COEF_REG(3), 0x11 }, { CMC_OFS_REG(3), 0x8B }, + { CMC_COEF_REG(4), 0x65 }, { CMC_OFS_REG(4), 0x07 }, + { CMC_COEF_REG(5), 0x14 }, { CMC_OFS_REG(5), 0x04 }, + { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x9C }, + { CMC_COEF_REG(7), 0x33 }, { CMC_OFS_REG(7), 0x89 }, + { CMC_COEF_REG(8), 0x74 }, { CMC_OFS_REG(8), 0x25 }, + /* Automatic white balance */ + { AWB_CTL_REG(0), 0x78 }, { AWB_CTL_REG(1), 0x2E }, + { AWB_CTL_REG(2), 0x20 }, { AWB_CTL_REG(3), 0x85 }, + /* Auto exposure */ + { AE_CTL_REG(0), 0xDC }, { AE_CTL_REG(1), 0x81 }, + { AE_CTL_REG(2), 0x30 }, { AE_CTL_REG(3), 0xA5 }, + { AE_CTL_REG(4), 0x40 }, { AE_CTL_REG(5), 0x51 }, + { AE_CTL_REG(6), 0x33 }, { AE_CTL_REG(7), 0x7E }, + { AE_CTL9_REG, 0x00 }, { AE_CTL10_REG, 0x02 }, + { AE_YLVL_REG, 0x44 }, { AE_YTH_REG(0), 0x34 }, + { AE_YTH_REG(1), 0x30 }, { AE_WGT_REG, 0xD5 }, + /* Lens shading compensation */ + { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, + { LENS_YCEN_REG, 0x70 }, { LENS_RC_REG, 0x53 }, + { LENS_GC_REG, 0x40 }, { LENS_BC_REG, 0x3E }, + { REG_TERM, 0 }, +}; + +static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd) +{ + return container_of(sd, struct noon010_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct noon010_info, hdl)->sd; +} + +static inline int set_i2c_page(struct noon010_info *info, + struct i2c_client *client, unsigned int reg) +{ + u32 page = reg >> 8 & 0xFF; + int ret = 0; + + if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { + ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); + if (!ret) + info->i2c_reg_page = page; + } + return ret; +} + +static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct noon010_info *info = to_noon010(sd); + int ret = set_i2c_page(info, client, reg_addr); + + if (ret) + return ret; + return i2c_smbus_read_byte_data(client, reg_addr & 0xFF); +} + +static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct noon010_info *info = to_noon010(sd); + int ret = set_i2c_page(info, client, reg_addr); + + if (ret) + return ret; + return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val); +} + +static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd, + const struct i2c_regval *msg) +{ + while (msg->addr != REG_TERM) { + int ret = cam_i2c_write(sd, msg->addr, msg->val); + + if (ret) + return ret; + msg++; + } + return 0; +} + +/* Device reset and sleep mode control */ +static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep) +{ + struct noon010_info *info = to_noon010(sd); + u8 reg = sleep ? 0xF1 : 0xF0; + int ret = 0; + + if (reset) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); + udelay(20); + } + if (!ret) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); + if (reset && !ret) + info->i2c_reg_page = -1; + } + return ret; +} + +/* Automatic white balance control */ +static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on) +{ + int ret; + + ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F); + if (!ret) + ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B); + return ret; +} + +/* Called with struct noon010_info.lock mutex held */ +static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip) +{ + struct noon010_info *info = to_noon010(sd); + int reg, ret; + + reg = cam_i2c_read(sd, VDO_CTL_REG(1)); + if (reg < 0) + return reg; + + reg &= 0x7C; + if (hflip) + reg |= 0x01; + if (vflip) + reg |= 0x02; + + ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80); + if (!ret) { + info->hflip = hflip; + info->vflip = vflip; + } + return ret; +} + +/* Configure resolution and color format */ +static int noon010_set_params(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + + int ret = cam_i2c_write(sd, VDO_CTL_REG(0), + info->curr_win->vid_ctl1); + if (ret) + return ret; + return cam_i2c_write(sd, ISP_CTL_REG(0), + info->curr_fmt->ispctl1_reg); +} + +/* Find nearest matching image pixel size. */ +static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf, + const struct noon010_frmsize **size) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(noon010_sizes); + const struct noon010_frmsize *fsize = &noon010_sizes[0], + *match = NULL; + + while (i--) { + int err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + if (size) + *size = match; + return 0; + } + return -EINVAL; +} + +/* Called with info.lock mutex held */ +static int power_enable(struct noon010_info *info) +{ + int ret; + + if (info->power) { + v4l2_info(&info->sd, "%s: sensor is already on\n", __func__); + return 0; + } + + if (gpio_is_valid(info->gpio_nstby)) + gpio_set_value(info->gpio_nstby, 0); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_set_value(info->gpio_nreset, 0); + + ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply); + if (ret) + return ret; + + if (gpio_is_valid(info->gpio_nreset)) { + msleep(50); + gpio_set_value(info->gpio_nreset, 1); + } + if (gpio_is_valid(info->gpio_nstby)) { + udelay(1000); + gpio_set_value(info->gpio_nstby, 1); + } + if (gpio_is_valid(info->gpio_nreset)) { + udelay(1000); + gpio_set_value(info->gpio_nreset, 0); + msleep(100); + gpio_set_value(info->gpio_nreset, 1); + msleep(20); + } + info->power = 1; + + v4l2_dbg(1, debug, &info->sd, "%s: sensor is on\n", __func__); + return 0; +} + +/* Called with info.lock mutex held */ +static int power_disable(struct noon010_info *info) +{ + int ret; + + if (!info->power) { + v4l2_info(&info->sd, "%s: sensor is already off\n", __func__); + return 0; + } + + ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply); + if (ret) + return ret; + + if (gpio_is_valid(info->gpio_nstby)) + gpio_set_value(info->gpio_nstby, 0); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_set_value(info->gpio_nreset, 0); + + info->power = 0; + + v4l2_dbg(1, debug, &info->sd, "%s: sensor is off\n", __func__); + + return 0; +} + +static int noon010_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct noon010_info *info = to_noon010(sd); + int ret = 0; + + v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", + __func__, ctrl->id, ctrl->val); + + mutex_lock(&info->lock); + /* + * If the device is not powered up by the host driver do + * not apply any controls to H/W at this time. Instead + * the controls will be restored right after power-up. + */ + if (!info->power) + goto unlock; + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = noon010_enable_autowhitebalance(sd, ctrl->val); + break; + case V4L2_CID_BLUE_BALANCE: + ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val); + break; + case V4L2_CID_RED_BALANCE: + ret = cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val); + break; + default: + ret = -EINVAL; + } +unlock: + mutex_unlock(&info->lock); + return ret; +} + +static int noon010_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(noon010_formats)) + return -EINVAL; + + code->code = noon010_formats[code->index].code; + return 0; +} + +static int noon010_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct noon010_info *info = to_noon010(sd); + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + } + return 0; + } + mf = &fmt->format; + + mutex_lock(&info->lock); + mf->width = info->curr_win->width; + mf->height = info->curr_win->height; + mf->code = info->curr_fmt->code; + mf->colorspace = info->curr_fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + mutex_unlock(&info->lock); + return 0; +} + +/* Return nearest media bus frame format. */ +static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(noon010_formats); + + while (--i) + if (mf->code == noon010_formats[i].code) + break; + mf->code = noon010_formats[i].code; + + return &noon010_formats[i]; +} + +static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct noon010_info *info = to_noon010(sd); + const struct noon010_frmsize *size = NULL; + const struct noon010_format *nf; + struct v4l2_mbus_framefmt *mf; + int ret = 0; + + nf = noon010_try_fmt(sd, &fmt->format); + noon010_try_frame_size(&fmt->format, &size); + fmt->format.colorspace = V4L2_COLORSPACE_JPEG; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + if (fh) { + mf = v4l2_subdev_get_try_format(fh, 0); + *mf = fmt->format; + } + return 0; + } + mutex_lock(&info->lock); + if (!info->streaming) { + info->apply_new_cfg = 1; + info->curr_fmt = nf; + info->curr_win = size; + } else { + ret = -EBUSY; + } + mutex_unlock(&info->lock); + return ret; +} + +/* Called with struct noon010_info.lock mutex held */ +static int noon010_base_config(struct v4l2_subdev *sd) +{ + int ret = noon010_bulk_write_reg(sd, noon010_base_regs); + if (!ret) + ret = noon010_set_params(sd); + if (!ret) + ret = noon010_set_flip(sd, 1, 0); + + return ret; +} + +static int noon010_s_power(struct v4l2_subdev *sd, int on) +{ + struct noon010_info *info = to_noon010(sd); + int ret; + + mutex_lock(&info->lock); + if (on) { + ret = power_enable(info); + if (!ret) + ret = noon010_base_config(sd); + } else { + noon010_power_ctrl(sd, false, true); + ret = power_disable(info); + } + mutex_unlock(&info->lock); + + /* Restore the controls state */ + if (!ret && on) + ret = v4l2_ctrl_handler_setup(&info->hdl); + + return ret; +} + +static int noon010_s_stream(struct v4l2_subdev *sd, int on) +{ + struct noon010_info *info = to_noon010(sd); + int ret = 0; + + mutex_lock(&info->lock); + if (!info->streaming != !on) { + ret = noon010_power_ctrl(sd, false, !on); + if (!ret) + info->streaming = on; + } + if (!ret && on && info->apply_new_cfg) { + ret = noon010_set_params(sd); + if (!ret) + info->apply_new_cfg = 0; + } + mutex_unlock(&info->lock); + return ret; +} + +static int noon010_log_status(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + + v4l2_ctrl_handler_log_status(&info->hdl, sd->name); + return 0; +} + +static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0); + + mf->width = noon010_sizes[0].width; + mf->height = noon010_sizes[0].height; + mf->code = noon010_formats[0].code; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_NONE; + return 0; +} + +static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = { + .open = noon010_open, +}; + +static const struct v4l2_ctrl_ops noon010_ctrl_ops = { + .s_ctrl = noon010_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops noon010_core_ops = { + .s_power = noon010_s_power, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .log_status = noon010_log_status, +}; + +static struct v4l2_subdev_pad_ops noon010_pad_ops = { + .enum_mbus_code = noon010_enum_mbus_code, + .get_fmt = noon010_get_fmt, + .set_fmt = noon010_set_fmt, +}; + +static struct v4l2_subdev_video_ops noon010_video_ops = { + .s_stream = noon010_s_stream, +}; + +static const struct v4l2_subdev_ops noon010_ops = { + .core = &noon010_core_ops, + .pad = &noon010_pad_ops, + .video = &noon010_video_ops, +}; + +/* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */ +static int noon010_detect(struct i2c_client *client, struct noon010_info *info) +{ + int ret; + + ret = power_enable(info); + if (ret) + return ret; + + ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); + if (ret < 0) + dev_err(&client->dev, "I2C read failed: 0x%X\n", ret); + + power_disable(info); + + return ret == NOON010PC30_ID ? 0 : -ENODEV; +} + +static int noon010_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct noon010_info *info; + struct v4l2_subdev *sd; + const struct noon010pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + int i; + + if (!pdata) { + dev_err(&client->dev, "No platform data!\n"); + return -EIO; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + mutex_init(&info->lock); + sd = &info->sd; + v4l2_i2c_subdev_init(sd, client, &noon010_ops); + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); + + sd->internal_ops = &noon010_subdev_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&info->hdl, 3); + + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 127, 1, 64); + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64); + + sd->ctrl_handler = &info->hdl; + + ret = info->hdl.error; + if (ret) + goto np_err; + + info->i2c_reg_page = -1; + info->gpio_nreset = -EINVAL; + info->gpio_nstby = -EINVAL; + info->curr_fmt = &noon010_formats[0]; + info->curr_win = &noon010_sizes[0]; + + if (gpio_is_valid(pdata->gpio_nreset)) { + ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST"); + if (ret) { + dev_err(&client->dev, "GPIO request error: %d\n", ret); + goto np_err; + } + info->gpio_nreset = pdata->gpio_nreset; + gpio_direction_output(info->gpio_nreset, 0); + gpio_export(info->gpio_nreset, 0); + } + + if (gpio_is_valid(pdata->gpio_nstby)) { + ret = gpio_request(pdata->gpio_nstby, "NOON010PC30 NSTBY"); + if (ret) { + dev_err(&client->dev, "GPIO request error: %d\n", ret); + goto np_gpio_err; + } + info->gpio_nstby = pdata->gpio_nstby; + gpio_direction_output(info->gpio_nstby, 0); + gpio_export(info->gpio_nstby, 0); + } + + for (i = 0; i < NOON010_NUM_SUPPLIES; i++) + info->supply[i].supply = noon010_supply_name[i]; + + ret = regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES, + info->supply); + if (ret) + goto np_reg_err; + + info->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + if (ret < 0) + goto np_me_err; + + ret = noon010_detect(client, info); + if (!ret) + return 0; + +np_me_err: + regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply); +np_reg_err: + if (gpio_is_valid(info->gpio_nstby)) + gpio_free(info->gpio_nstby); +np_gpio_err: + if (gpio_is_valid(info->gpio_nreset)) + gpio_free(info->gpio_nreset); +np_err: + v4l2_ctrl_handler_free(&info->hdl); + v4l2_device_unregister_subdev(sd); + kfree(info); + return ret; +} + +static int noon010_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct noon010_info *info = to_noon010(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&info->hdl); + + regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_free(info->gpio_nreset); + + if (gpio_is_valid(info->gpio_nstby)) + gpio_free(info->gpio_nstby); + + media_entity_cleanup(&sd->entity); + kfree(info); + return 0; +} + +static const struct i2c_device_id noon010_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, noon010_id); + + +static struct i2c_driver noon010_i2c_driver = { + .driver = { + .name = MODULE_NAME + }, + .probe = noon010_probe, + .remove = noon010_remove, + .id_table = noon010_id, +}; + +module_i2c_driver(noon010_i2c_driver); + +MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c new file mode 100644 index 000000000000..e7c82b297514 --- /dev/null +++ b/drivers/media/i2c/ov7670.c @@ -0,0 +1,1586 @@ +/* + * A V4L2 driver for OmniVision OV7670 cameras. + * + * Copyright 2006 One Laptop Per Child Association, Inc. Written + * by Jonathan Corbet with substantial inspiration from Mark + * McClelland's ovcamchip code. + * + * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-mediabus.h> +#include <media/ov7670.h> + +MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); +MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* + * Basic window sizes. These probably belong somewhere more globally + * useful. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 + +/* + * The 7670 sits on i2c with ID 0x42 + */ +#define OV7670_I2C_ADDR 0x42 + +/* Registers */ +#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ +#define REG_BLUE 0x01 /* blue gain */ +#define REG_RED 0x02 /* red gain */ +#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ +#define REG_COM1 0x04 /* Control 1 */ +#define COM1_CCIR656 0x40 /* CCIR656 enable */ +#define REG_BAVE 0x05 /* U/B Average level */ +#define REG_GbAVE 0x06 /* Y/Gb Average level */ +#define REG_AECHH 0x07 /* AEC MS 5 bits */ +#define REG_RAVE 0x08 /* V/R Average level */ +#define REG_COM2 0x09 /* Control 2 */ +#define COM2_SSLEEP 0x10 /* Soft sleep mode */ +#define REG_PID 0x0a /* Product ID MSB */ +#define REG_VER 0x0b /* Product ID LSB */ +#define REG_COM3 0x0c /* Control 3 */ +#define COM3_SWAP 0x40 /* Byte swap */ +#define COM3_SCALEEN 0x08 /* Enable scaling */ +#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ +#define REG_COM4 0x0d /* Control 4 */ +#define REG_COM5 0x0e /* All "reserved" */ +#define REG_COM6 0x0f /* Control 6 */ +#define REG_AECH 0x10 /* More bits of AEC value */ +#define REG_CLKRC 0x11 /* Clocl control */ +#define CLK_EXT 0x40 /* Use external clock directly */ +#define CLK_SCALE 0x3f /* Mask for internal clock scale */ +#define REG_COM7 0x12 /* Control 7 */ +#define COM7_RESET 0x80 /* Register reset */ +#define COM7_FMT_MASK 0x38 +#define COM7_FMT_VGA 0x00 +#define COM7_FMT_CIF 0x20 /* CIF format */ +#define COM7_FMT_QVGA 0x10 /* QVGA format */ +#define COM7_FMT_QCIF 0x08 /* QCIF format */ +#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ +#define COM7_YUV 0x00 /* YUV */ +#define COM7_BAYER 0x01 /* Bayer format */ +#define COM7_PBAYER 0x05 /* "Processed bayer" */ +#define REG_COM8 0x13 /* Control 8 */ +#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ +#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ +#define COM8_BFILT 0x20 /* Band filter enable */ +#define COM8_AGC 0x04 /* Auto gain enable */ +#define COM8_AWB 0x02 /* White balance enable */ +#define COM8_AEC 0x01 /* Auto exposure enable */ +#define REG_COM9 0x14 /* Control 9 - gain ceiling */ +#define REG_COM10 0x15 /* Control 10 */ +#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ +#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ +#define COM10_HREF_REV 0x08 /* Reverse HREF */ +#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ +#define COM10_VS_NEG 0x02 /* VSYNC negative */ +#define COM10_HS_NEG 0x01 /* HSYNC negative */ +#define REG_HSTART 0x17 /* Horiz start high bits */ +#define REG_HSTOP 0x18 /* Horiz stop high bits */ +#define REG_VSTART 0x19 /* Vert start high bits */ +#define REG_VSTOP 0x1a /* Vert stop high bits */ +#define REG_PSHFT 0x1b /* Pixel delay after HREF */ +#define REG_MIDH 0x1c /* Manuf. ID high */ +#define REG_MIDL 0x1d /* Manuf. ID low */ +#define REG_MVFP 0x1e /* Mirror / vflip */ +#define MVFP_MIRROR 0x20 /* Mirror image */ +#define MVFP_FLIP 0x10 /* Vertical flip */ + +#define REG_AEW 0x24 /* AGC upper limit */ +#define REG_AEB 0x25 /* AGC lower limit */ +#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ +#define REG_HSYST 0x30 /* HSYNC rising edge delay */ +#define REG_HSYEN 0x31 /* HSYNC falling edge delay */ +#define REG_HREF 0x32 /* HREF pieces */ +#define REG_TSLB 0x3a /* lots of stuff */ +#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ +#define REG_COM11 0x3b /* Control 11 */ +#define COM11_NIGHT 0x80 /* NIght mode enable */ +#define COM11_NMFR 0x60 /* Two bit NM frame rate */ +#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ +#define COM11_50HZ 0x08 /* Manual 50Hz select */ +#define COM11_EXP 0x02 +#define REG_COM12 0x3c /* Control 12 */ +#define COM12_HREF 0x80 /* HREF always */ +#define REG_COM13 0x3d /* Control 13 */ +#define COM13_GAMMA 0x80 /* Gamma enable */ +#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ +#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ +#define REG_COM14 0x3e /* Control 14 */ +#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ +#define REG_EDGE 0x3f /* Edge enhancement factor */ +#define REG_COM15 0x40 /* Control 15 */ +#define COM15_R10F0 0x00 /* Data range 10 to F0 */ +#define COM15_R01FE 0x80 /* 01 to FE */ +#define COM15_R00FF 0xc0 /* 00 to FF */ +#define COM15_RGB565 0x10 /* RGB565 output */ +#define COM15_RGB555 0x30 /* RGB555 output */ +#define REG_COM16 0x41 /* Control 16 */ +#define COM16_AWBGAIN 0x08 /* AWB gain enable */ +#define REG_COM17 0x42 /* Control 17 */ +#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ +#define COM17_CBAR 0x08 /* DSP Color bar */ + +/* + * This matrix defines how the colors are generated, must be + * tweaked to adjust hue and saturation. + * + * Order: v-red, v-green, v-blue, u-red, u-green, u-blue + * + * They are nine-bit signed quantities, with the sign bit + * stored in 0x58. Sign for v-red is bit 0, and up from there. + */ +#define REG_CMATRIX_BASE 0x4f +#define CMATRIX_LEN 6 +#define REG_CMATRIX_SIGN 0x58 + + +#define REG_BRIGHT 0x55 /* Brightness */ +#define REG_CONTRAS 0x56 /* Contrast control */ + +#define REG_GFIX 0x69 /* Fix gain control */ + +#define REG_REG76 0x76 /* OV's name */ +#define R76_BLKPCOR 0x80 /* Black pixel correction enable */ +#define R76_WHTPCOR 0x40 /* White pixel correction enable */ + +#define REG_RGB444 0x8c /* RGB 444 control */ +#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ +#define R444_RGBX 0x01 /* Empty nibble at end */ + +#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ +#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ + +#define REG_BD50MAX 0xa5 /* 50hz banding step limit */ +#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ +#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ +#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ +#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ +#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ +#define REG_BD60MAX 0xab /* 60hz banding step limit */ + + +/* + * Information we maintain about a known sensor. + */ +struct ov7670_format_struct; /* coming later */ +struct ov7670_info { + struct v4l2_subdev sd; + struct ov7670_format_struct *fmt; /* Current format */ + unsigned char sat; /* Saturation value */ + int hue; /* Hue value */ + int min_width; /* Filter out smaller sizes */ + int min_height; /* Filter out smaller sizes */ + int clock_speed; /* External clock speed (MHz) */ + u8 clkrc; /* Clock divider value */ + bool use_smbus; /* Use smbus I/O instead of I2C */ +}; + +static inline struct ov7670_info *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov7670_info, sd); +} + + + +/* + * The default register settings, as obtained from OmniVision. There + * is really no making sense of most of these - lots of "reserved" values + * and such. + * + * These settings give VGA YUYV. + */ + +struct regval_list { + unsigned char reg_num; + unsigned char value; +}; + +static struct regval_list ov7670_default_regs[] = { + { REG_COM7, COM7_RESET }, +/* + * Clock scale: 3 = 15fps + * 2 = 20fps + * 1 = 30fps + */ + { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */ + { REG_TSLB, 0x04 }, /* OV */ + { REG_COM7, 0 }, /* VGA */ + /* + * Set the hardware window. These values from OV don't entirely + * make sense - hstop is less than hstart. But they work... + */ + { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 }, + { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 }, + { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a }, + + { REG_COM3, 0 }, { REG_COM14, 0 }, + /* Mystery scaling numbers */ + { 0x70, 0x3a }, { 0x71, 0x35 }, + { 0x72, 0x11 }, { 0x73, 0xf0 }, + { 0xa2, 0x02 }, { REG_COM10, 0x0 }, + + /* Gamma curve values */ + { 0x7a, 0x20 }, { 0x7b, 0x10 }, + { 0x7c, 0x1e }, { 0x7d, 0x35 }, + { 0x7e, 0x5a }, { 0x7f, 0x69 }, + { 0x80, 0x76 }, { 0x81, 0x80 }, + { 0x82, 0x88 }, { 0x83, 0x8f }, + { 0x84, 0x96 }, { 0x85, 0xa3 }, + { 0x86, 0xaf }, { 0x87, 0xc4 }, + { 0x88, 0xd7 }, { 0x89, 0xe8 }, + + /* AGC and AEC parameters. Note we start by disabling those features, + then turn them only after tweaking the values. */ + { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT }, + { REG_GAIN, 0 }, { REG_AECH, 0 }, + { REG_COM4, 0x40 }, /* magic reserved bit */ + { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ + { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 }, + { REG_AEW, 0x95 }, { REG_AEB, 0x33 }, + { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 }, + { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */ + { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 }, + { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 }, + { REG_HAECC7, 0x94 }, + { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC }, + + /* Almost all of these are magic "reserved" values. */ + { REG_COM5, 0x61 }, { REG_COM6, 0x4b }, + { 0x16, 0x02 }, { REG_MVFP, 0x07 }, + { 0x21, 0x02 }, { 0x22, 0x91 }, + { 0x29, 0x07 }, { 0x33, 0x0b }, + { 0x35, 0x0b }, { 0x37, 0x1d }, + { 0x38, 0x71 }, { 0x39, 0x2a }, + { REG_COM12, 0x78 }, { 0x4d, 0x40 }, + { 0x4e, 0x20 }, { REG_GFIX, 0 }, + { 0x6b, 0x4a }, { 0x74, 0x10 }, + { 0x8d, 0x4f }, { 0x8e, 0 }, + { 0x8f, 0 }, { 0x90, 0 }, + { 0x91, 0 }, { 0x96, 0 }, + { 0x9a, 0 }, { 0xb0, 0x84 }, + { 0xb1, 0x0c }, { 0xb2, 0x0e }, + { 0xb3, 0x82 }, { 0xb8, 0x0a }, + + /* More reserved magic, some of which tweaks white balance */ + { 0x43, 0x0a }, { 0x44, 0xf0 }, + { 0x45, 0x34 }, { 0x46, 0x58 }, + { 0x47, 0x28 }, { 0x48, 0x3a }, + { 0x59, 0x88 }, { 0x5a, 0x88 }, + { 0x5b, 0x44 }, { 0x5c, 0x67 }, + { 0x5d, 0x49 }, { 0x5e, 0x0e }, + { 0x6c, 0x0a }, { 0x6d, 0x55 }, + { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */ + { 0x6a, 0x40 }, { REG_BLUE, 0x40 }, + { REG_RED, 0x60 }, + { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB }, + + /* Matrix coefficients */ + { 0x4f, 0x80 }, { 0x50, 0x80 }, + { 0x51, 0 }, { 0x52, 0x22 }, + { 0x53, 0x5e }, { 0x54, 0x80 }, + { 0x58, 0x9e }, + + { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 }, + { 0x75, 0x05 }, { 0x76, 0xe1 }, + { 0x4c, 0 }, { 0x77, 0x01 }, + { REG_COM13, 0xc3 }, { 0x4b, 0x09 }, + { 0xc9, 0x60 }, { REG_COM16, 0x38 }, + { 0x56, 0x40 }, + + { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO }, + { 0xa4, 0x88 }, { 0x96, 0 }, + { 0x97, 0x30 }, { 0x98, 0x20 }, + { 0x99, 0x30 }, { 0x9a, 0x84 }, + { 0x9b, 0x29 }, { 0x9c, 0x03 }, + { 0x9d, 0x4c }, { 0x9e, 0x3f }, + { 0x78, 0x04 }, + + /* Extra-weird stuff. Some sort of multiplexor register */ + { 0x79, 0x01 }, { 0xc8, 0xf0 }, + { 0x79, 0x0f }, { 0xc8, 0x00 }, + { 0x79, 0x10 }, { 0xc8, 0x7e }, + { 0x79, 0x0a }, { 0xc8, 0x80 }, + { 0x79, 0x0b }, { 0xc8, 0x01 }, + { 0x79, 0x0c }, { 0xc8, 0x0f }, + { 0x79, 0x0d }, { 0xc8, 0x20 }, + { 0x79, 0x09 }, { 0xc8, 0x80 }, + { 0x79, 0x02 }, { 0xc8, 0xc0 }, + { 0x79, 0x03 }, { 0xc8, 0x40 }, + { 0x79, 0x05 }, { 0xc8, 0x30 }, + { 0x79, 0x26 }, + + { 0xff, 0xff }, /* END MARKER */ +}; + + +/* + * Here we'll try to encapsulate the changes for just the output + * video format. + * + * RGB656 and YUV422 come from OV; RGB444 is homebrewed. + * + * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why. + */ + + +static struct regval_list ov7670_fmt_yuv422[] = { + { REG_COM7, 0x0 }, /* Selects YUV mode */ + { REG_RGB444, 0 }, /* No RGB444 please */ + { REG_COM1, 0 }, /* CCIR601 */ + { REG_COM15, COM15_R00FF }, + { REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0x80 }, /* "matrix coefficient 1" */ + { 0x50, 0x80 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x22 }, /* "matrix coefficient 4" */ + { 0x53, 0x5e }, /* "matrix coefficient 5" */ + { 0x54, 0x80 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT }, + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_rgb565[] = { + { REG_COM7, COM7_RGB }, /* Selects RGB mode */ + { REG_RGB444, 0 }, /* No RGB444 please */ + { REG_COM1, 0x0 }, /* CCIR601 */ + { REG_COM15, COM15_RGB565 }, + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT }, + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_rgb444[] = { + { REG_COM7, COM7_RGB }, /* Selects RGB mode */ + { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */ + { REG_COM1, 0x0 }, /* CCIR601 */ + { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */ + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */ + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_raw[] = { + { REG_COM7, COM7_BAYER }, + { REG_COM13, 0x08 }, /* No gamma, magic rsvd bit */ + { REG_COM16, 0x3d }, /* Edge enhancement, denoise */ + { REG_REG76, 0xe1 }, /* Pix correction, magic rsvd */ + { 0xff, 0xff }, +}; + + + +/* + * Low-level register I/O. + * + * Note that there are two versions of these. On the XO 1, the + * i2c controller only does SMBUS, so that's what we use. The + * ov7670 is not really an SMBUS device, though, so the communication + * is not always entirely reliable. + */ +static int ov7670_read_smbus(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret >= 0) { + *value = (unsigned char)ret; + ret = 0; + } + return ret; +} + + +static int ov7670_write_smbus(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = i2c_smbus_write_byte_data(client, reg, value); + + if (reg == REG_COM7 && (value & COM7_RESET)) + msleep(5); /* Wait for reset to run */ + return ret; +} + +/* + * On most platforms, we'd rather do straight i2c I/O. + */ +static int ov7670_read_i2c(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 data = reg; + struct i2c_msg msg; + int ret; + + /* + * Send out the register address... + */ + msg.addr = client->addr; + msg.flags = 0; + msg.len = 1; + msg.buf = &data; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + printk(KERN_ERR "Error %d on register write\n", ret); + return ret; + } + /* + * ...then read back the result. + */ + msg.flags = I2C_M_RD; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret >= 0) { + *value = data; + ret = 0; + } + return ret; +} + + +static int ov7670_write_i2c(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_msg msg; + unsigned char data[2] = { reg, value }; + int ret; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = data; + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret > 0) + ret = 0; + if (reg == REG_COM7 && (value & COM7_RESET)) + msleep(5); /* Wait for reset to run */ + return ret; +} + +static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg, + unsigned char *value) +{ + struct ov7670_info *info = to_state(sd); + if (info->use_smbus) + return ov7670_read_smbus(sd, reg, value); + else + return ov7670_read_i2c(sd, reg, value); +} + +static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg, + unsigned char value) +{ + struct ov7670_info *info = to_state(sd); + if (info->use_smbus) + return ov7670_write_smbus(sd, reg, value); + else + return ov7670_write_i2c(sd, reg, value); +} + +/* + * Write a list of register settings; ff/ff stops the process. + */ +static int ov7670_write_array(struct v4l2_subdev *sd, struct regval_list *vals) +{ + while (vals->reg_num != 0xff || vals->value != 0xff) { + int ret = ov7670_write(sd, vals->reg_num, vals->value); + if (ret < 0) + return ret; + vals++; + } + return 0; +} + + +/* + * Stuff that knows about the sensor. + */ +static int ov7670_reset(struct v4l2_subdev *sd, u32 val) +{ + ov7670_write(sd, REG_COM7, COM7_RESET); + msleep(1); + return 0; +} + + +static int ov7670_init(struct v4l2_subdev *sd, u32 val) +{ + return ov7670_write_array(sd, ov7670_default_regs); +} + + + +static int ov7670_detect(struct v4l2_subdev *sd) +{ + unsigned char v; + int ret; + + ret = ov7670_init(sd, 0); + if (ret < 0) + return ret; + ret = ov7670_read(sd, REG_MIDH, &v); + if (ret < 0) + return ret; + if (v != 0x7f) /* OV manuf. id. */ + return -ENODEV; + ret = ov7670_read(sd, REG_MIDL, &v); + if (ret < 0) + return ret; + if (v != 0xa2) + return -ENODEV; + /* + * OK, we know we have an OmniVision chip...but which one? + */ + ret = ov7670_read(sd, REG_PID, &v); + if (ret < 0) + return ret; + if (v != 0x76) /* PID + VER = 0x76 / 0x73 */ + return -ENODEV; + ret = ov7670_read(sd, REG_VER, &v); + if (ret < 0) + return ret; + if (v != 0x73) /* PID + VER = 0x76 / 0x73 */ + return -ENODEV; + return 0; +} + + +/* + * Store information about the video data format. The color matrix + * is deeply tied into the format, so keep the relevant values here. + * The magic matrix numbers come from OmniVision. + */ +static struct ov7670_format_struct { + enum v4l2_mbus_pixelcode mbus_code; + enum v4l2_colorspace colorspace; + struct regval_list *regs; + int cmatrix[CMATRIX_LEN]; +} ov7670_formats[] = { + { + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .regs = ov7670_fmt_yuv422, + .cmatrix = { 128, -128, 0, -34, -94, 128 }, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .regs = ov7670_fmt_rgb444, + .cmatrix = { 179, -179, 0, -61, -176, 228 }, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + .regs = ov7670_fmt_rgb565, + .cmatrix = { 179, -179, 0, -61, -176, 228 }, + }, + { + .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8, + .colorspace = V4L2_COLORSPACE_SRGB, + .regs = ov7670_fmt_raw, + .cmatrix = { 0, 0, 0, 0, 0, 0 }, + }, +}; +#define N_OV7670_FMTS ARRAY_SIZE(ov7670_formats) + + +/* + * Then there is the issue of window sizes. Try to capture the info here. + */ + +/* + * QCIF mode is done (by OV) in a very strange way - it actually looks like + * VGA with weird scaling options - they do *not* use the canned QCIF mode + * which is allegedly provided by the sensor. So here's the weird register + * settings. + */ +static struct regval_list ov7670_qcif_regs[] = { + { REG_COM3, COM3_SCALEEN|COM3_DCWEN }, + { REG_COM3, COM3_DCWEN }, + { REG_COM14, COM14_DCWEN | 0x01}, + { 0x73, 0xf1 }, + { 0xa2, 0x52 }, + { 0x7b, 0x1c }, + { 0x7c, 0x28 }, + { 0x7d, 0x3c }, + { 0x7f, 0x69 }, + { REG_COM9, 0x38 }, + { 0xa1, 0x0b }, + { 0x74, 0x19 }, + { 0x9a, 0x80 }, + { 0x43, 0x14 }, + { REG_COM13, 0xc0 }, + { 0xff, 0xff }, +}; + +static struct ov7670_win_size { + int width; + int height; + unsigned char com7_bit; + int hstart; /* Start/stop values for the camera. Note */ + int hstop; /* that they do not always make complete */ + int vstart; /* sense to humans, but evidently the sensor */ + int vstop; /* will do the right thing... */ + struct regval_list *regs; /* Regs to tweak */ +/* h/vref stuff */ +} ov7670_win_sizes[] = { + /* VGA */ + { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .com7_bit = COM7_FMT_VGA, + .hstart = 158, /* These values from */ + .hstop = 14, /* Omnivision */ + .vstart = 10, + .vstop = 490, + .regs = NULL, + }, + /* CIF */ + { + .width = CIF_WIDTH, + .height = CIF_HEIGHT, + .com7_bit = COM7_FMT_CIF, + .hstart = 170, /* Empirically determined */ + .hstop = 90, + .vstart = 14, + .vstop = 494, + .regs = NULL, + }, + /* QVGA */ + { + .width = QVGA_WIDTH, + .height = QVGA_HEIGHT, + .com7_bit = COM7_FMT_QVGA, + .hstart = 168, /* Empirically determined */ + .hstop = 24, + .vstart = 12, + .vstop = 492, + .regs = NULL, + }, + /* QCIF */ + { + .width = QCIF_WIDTH, + .height = QCIF_HEIGHT, + .com7_bit = COM7_FMT_VGA, /* see comment above */ + .hstart = 456, /* Empirically determined */ + .hstop = 24, + .vstart = 14, + .vstop = 494, + .regs = ov7670_qcif_regs, + }, +}; + +#define N_WIN_SIZES (ARRAY_SIZE(ov7670_win_sizes)) + + +/* + * Store a set of start/stop values into the camera. + */ +static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop, + int vstart, int vstop) +{ + int ret; + unsigned char v; +/* + * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of + * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is + * a mystery "edge offset" value in the top two bits of href. + */ + ret = ov7670_write(sd, REG_HSTART, (hstart >> 3) & 0xff); + ret += ov7670_write(sd, REG_HSTOP, (hstop >> 3) & 0xff); + ret += ov7670_read(sd, REG_HREF, &v); + v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); + msleep(10); + ret += ov7670_write(sd, REG_HREF, v); +/* + * Vertical: similar arrangement, but only 10 bits. + */ + ret += ov7670_write(sd, REG_VSTART, (vstart >> 2) & 0xff); + ret += ov7670_write(sd, REG_VSTOP, (vstop >> 2) & 0xff); + ret += ov7670_read(sd, REG_VREF, &v); + v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3); + msleep(10); + ret += ov7670_write(sd, REG_VREF, v); + return ret; +} + + +static int ov7670_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= N_OV7670_FMTS) + return -EINVAL; + + *code = ov7670_formats[index].mbus_code; + return 0; +} + +static int ov7670_try_fmt_internal(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt, + struct ov7670_format_struct **ret_fmt, + struct ov7670_win_size **ret_wsize) +{ + int index; + struct ov7670_win_size *wsize; + + for (index = 0; index < N_OV7670_FMTS; index++) + if (ov7670_formats[index].mbus_code == fmt->code) + break; + if (index >= N_OV7670_FMTS) { + /* default to first format */ + index = 0; + fmt->code = ov7670_formats[0].mbus_code; + } + if (ret_fmt != NULL) + *ret_fmt = ov7670_formats + index; + /* + * Fields: the OV devices claim to be progressive. + */ + fmt->field = V4L2_FIELD_NONE; + /* + * Round requested image size down to the nearest + * we support, but not below the smallest. + */ + for (wsize = ov7670_win_sizes; wsize < ov7670_win_sizes + N_WIN_SIZES; + wsize++) + if (fmt->width >= wsize->width && fmt->height >= wsize->height) + break; + if (wsize >= ov7670_win_sizes + N_WIN_SIZES) + wsize--; /* Take the smallest one */ + if (ret_wsize != NULL) + *ret_wsize = wsize; + /* + * Note the size we'll actually handle. + */ + fmt->width = wsize->width; + fmt->height = wsize->height; + fmt->colorspace = ov7670_formats[index].colorspace; + return 0; +} + +static int ov7670_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + return ov7670_try_fmt_internal(sd, fmt, NULL, NULL); +} + +/* + * Set a format. + */ +static int ov7670_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct ov7670_format_struct *ovfmt; + struct ov7670_win_size *wsize; + struct ov7670_info *info = to_state(sd); + unsigned char com7; + int ret; + + ret = ov7670_try_fmt_internal(sd, fmt, &ovfmt, &wsize); + + if (ret) + return ret; + /* + * COM7 is a pain in the ass, it doesn't like to be read then + * quickly written afterward. But we have everything we need + * to set it absolutely here, as long as the format-specific + * register sets list it first. + */ + com7 = ovfmt->regs[0].value; + com7 |= wsize->com7_bit; + ov7670_write(sd, REG_COM7, com7); + /* + * Now write the rest of the array. Also store start/stops + */ + ov7670_write_array(sd, ovfmt->regs + 1); + ov7670_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart, + wsize->vstop); + ret = 0; + if (wsize->regs) + ret = ov7670_write_array(sd, wsize->regs); + info->fmt = ovfmt; + + /* + * If we're running RGB565, we must rewrite clkrc after setting + * the other parameters or the image looks poor. If we're *not* + * doing RGB565, we must not rewrite clkrc or the image looks + * *really* poor. + * + * (Update) Now that we retain clkrc state, we should be able + * to write it unconditionally, and that will make the frame + * rate persistent too. + */ + if (ret == 0) + ret = ov7670_write(sd, REG_CLKRC, info->clkrc); + return 0; +} + +/* + * Implement G/S_PARM. There is a "high quality" mode we could try + * to do someday; for now, we just do the frame rate tweak. + */ +static int ov7670_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct ov7670_info *info = to_state(sd); + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(struct v4l2_captureparm)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = 1; + cp->timeperframe.denominator = info->clock_speed; + if ((info->clkrc & CLK_EXT) == 0 && (info->clkrc & CLK_SCALE) > 1) + cp->timeperframe.denominator /= (info->clkrc & CLK_SCALE); + return 0; +} + +static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + struct ov7670_info *info = to_state(sd); + int div; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + if (tpf->numerator == 0 || tpf->denominator == 0) + div = 1; /* Reset to full rate */ + else + div = (tpf->numerator * info->clock_speed) / tpf->denominator; + if (div == 0) + div = 1; + else if (div > CLK_SCALE) + div = CLK_SCALE; + info->clkrc = (info->clkrc & 0x80) | div; + tpf->numerator = 1; + tpf->denominator = info->clock_speed / div; + return ov7670_write(sd, REG_CLKRC, info->clkrc); +} + + +/* + * Frame intervals. Since frame rates are controlled with the clock + * divider, we can only do 30/n for integer n values. So no continuous + * or stepwise options. Here we just pick a handful of logical values. + */ + +static int ov7670_frame_rates[] = { 30, 15, 10, 5, 1 }; + +static int ov7670_enum_frameintervals(struct v4l2_subdev *sd, + struct v4l2_frmivalenum *interval) +{ + if (interval->index >= ARRAY_SIZE(ov7670_frame_rates)) + return -EINVAL; + interval->type = V4L2_FRMIVAL_TYPE_DISCRETE; + interval->discrete.numerator = 1; + interval->discrete.denominator = ov7670_frame_rates[interval->index]; + return 0; +} + +/* + * Frame size enumeration + */ +static int ov7670_enum_framesizes(struct v4l2_subdev *sd, + struct v4l2_frmsizeenum *fsize) +{ + struct ov7670_info *info = to_state(sd); + int i; + int num_valid = -1; + __u32 index = fsize->index; + + /* + * If a minimum width/height was requested, filter out the capture + * windows that fall outside that. + */ + for (i = 0; i < N_WIN_SIZES; i++) { + struct ov7670_win_size *win = &ov7670_win_sizes[index]; + if (info->min_width && win->width < info->min_width) + continue; + if (info->min_height && win->height < info->min_height) + continue; + if (index == ++num_valid) { + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = win->width; + fsize->discrete.height = win->height; + return 0; + } + } + + return -EINVAL; +} + +/* + * Code for dealing with controls. + */ + +static int ov7670_store_cmatrix(struct v4l2_subdev *sd, + int matrix[CMATRIX_LEN]) +{ + int i, ret; + unsigned char signbits = 0; + + /* + * Weird crap seems to exist in the upper part of + * the sign bits register, so let's preserve it. + */ + ret = ov7670_read(sd, REG_CMATRIX_SIGN, &signbits); + signbits &= 0xc0; + + for (i = 0; i < CMATRIX_LEN; i++) { + unsigned char raw; + + if (matrix[i] < 0) { + signbits |= (1 << i); + if (matrix[i] < -255) + raw = 0xff; + else + raw = (-1 * matrix[i]) & 0xff; + } + else { + if (matrix[i] > 255) + raw = 0xff; + else + raw = matrix[i] & 0xff; + } + ret += ov7670_write(sd, REG_CMATRIX_BASE + i, raw); + } + ret += ov7670_write(sd, REG_CMATRIX_SIGN, signbits); + return ret; +} + + +/* + * Hue also requires messing with the color matrix. It also requires + * trig functions, which tend not to be well supported in the kernel. + * So here is a simple table of sine values, 0-90 degrees, in steps + * of five degrees. Values are multiplied by 1000. + * + * The following naive approximate trig functions require an argument + * carefully limited to -180 <= theta <= 180. + */ +#define SIN_STEP 5 +static const int ov7670_sin_table[] = { + 0, 87, 173, 258, 342, 422, + 499, 573, 642, 707, 766, 819, + 866, 906, 939, 965, 984, 996, + 1000 +}; + +static int ov7670_sine(int theta) +{ + int chs = 1; + int sine; + + if (theta < 0) { + theta = -theta; + chs = -1; + } + if (theta <= 90) + sine = ov7670_sin_table[theta/SIN_STEP]; + else { + theta -= 90; + sine = 1000 - ov7670_sin_table[theta/SIN_STEP]; + } + return sine*chs; +} + +static int ov7670_cosine(int theta) +{ + theta = 90 - theta; + if (theta > 180) + theta -= 360; + else if (theta < -180) + theta += 360; + return ov7670_sine(theta); +} + + + + +static void ov7670_calc_cmatrix(struct ov7670_info *info, + int matrix[CMATRIX_LEN]) +{ + int i; + /* + * Apply the current saturation setting first. + */ + for (i = 0; i < CMATRIX_LEN; i++) + matrix[i] = (info->fmt->cmatrix[i]*info->sat) >> 7; + /* + * Then, if need be, rotate the hue value. + */ + if (info->hue != 0) { + int sinth, costh, tmpmatrix[CMATRIX_LEN]; + + memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int)); + sinth = ov7670_sine(info->hue); + costh = ov7670_cosine(info->hue); + + matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000; + matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000; + matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000; + matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000; + matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000; + matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000; + } +} + + + +static int ov7670_s_sat(struct v4l2_subdev *sd, int value) +{ + struct ov7670_info *info = to_state(sd); + int matrix[CMATRIX_LEN]; + int ret; + + info->sat = value; + ov7670_calc_cmatrix(info, matrix); + ret = ov7670_store_cmatrix(sd, matrix); + return ret; +} + +static int ov7670_g_sat(struct v4l2_subdev *sd, __s32 *value) +{ + struct ov7670_info *info = to_state(sd); + + *value = info->sat; + return 0; +} + +static int ov7670_s_hue(struct v4l2_subdev *sd, int value) +{ + struct ov7670_info *info = to_state(sd); + int matrix[CMATRIX_LEN]; + int ret; + + if (value < -180 || value > 180) + return -EINVAL; + info->hue = value; + ov7670_calc_cmatrix(info, matrix); + ret = ov7670_store_cmatrix(sd, matrix); + return ret; +} + + +static int ov7670_g_hue(struct v4l2_subdev *sd, __s32 *value) +{ + struct ov7670_info *info = to_state(sd); + + *value = info->hue; + return 0; +} + + +/* + * Some weird registers seem to store values in a sign/magnitude format! + */ +static unsigned char ov7670_sm_to_abs(unsigned char v) +{ + if ((v & 0x80) == 0) + return v + 128; + return 128 - (v & 0x7f); +} + + +static unsigned char ov7670_abs_to_sm(unsigned char v) +{ + if (v > 127) + return v & 0x7f; + return (128 - v) | 0x80; +} + +static int ov7670_s_brightness(struct v4l2_subdev *sd, int value) +{ + unsigned char com8 = 0, v; + int ret; + + ov7670_read(sd, REG_COM8, &com8); + com8 &= ~COM8_AEC; + ov7670_write(sd, REG_COM8, com8); + v = ov7670_abs_to_sm(value); + ret = ov7670_write(sd, REG_BRIGHT, v); + return ret; +} + +static int ov7670_g_brightness(struct v4l2_subdev *sd, __s32 *value) +{ + unsigned char v = 0; + int ret = ov7670_read(sd, REG_BRIGHT, &v); + + *value = ov7670_sm_to_abs(v); + return ret; +} + +static int ov7670_s_contrast(struct v4l2_subdev *sd, int value) +{ + return ov7670_write(sd, REG_CONTRAS, (unsigned char) value); +} + +static int ov7670_g_contrast(struct v4l2_subdev *sd, __s32 *value) +{ + unsigned char v = 0; + int ret = ov7670_read(sd, REG_CONTRAS, &v); + + *value = v; + return ret; +} + +static int ov7670_g_hflip(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char v = 0; + + ret = ov7670_read(sd, REG_MVFP, &v); + *value = (v & MVFP_MIRROR) == MVFP_MIRROR; + return ret; +} + + +static int ov7670_s_hflip(struct v4l2_subdev *sd, int value) +{ + unsigned char v = 0; + int ret; + + ret = ov7670_read(sd, REG_MVFP, &v); + if (value) + v |= MVFP_MIRROR; + else + v &= ~MVFP_MIRROR; + msleep(10); /* FIXME */ + ret += ov7670_write(sd, REG_MVFP, v); + return ret; +} + + + +static int ov7670_g_vflip(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char v = 0; + + ret = ov7670_read(sd, REG_MVFP, &v); + *value = (v & MVFP_FLIP) == MVFP_FLIP; + return ret; +} + + +static int ov7670_s_vflip(struct v4l2_subdev *sd, int value) +{ + unsigned char v = 0; + int ret; + + ret = ov7670_read(sd, REG_MVFP, &v); + if (value) + v |= MVFP_FLIP; + else + v &= ~MVFP_FLIP; + msleep(10); /* FIXME */ + ret += ov7670_write(sd, REG_MVFP, v); + return ret; +} + +/* + * GAIN is split between REG_GAIN and REG_VREF[7:6]. If one believes + * the data sheet, the VREF parts should be the most significant, but + * experience shows otherwise. There seems to be little value in + * messing with the VREF bits, so we leave them alone. + */ +static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char gain; + + ret = ov7670_read(sd, REG_GAIN, &gain); + *value = gain; + return ret; +} + +static int ov7670_s_gain(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com8; + + ret = ov7670_write(sd, REG_GAIN, value & 0xff); + /* Have to turn off AGC as well */ + if (ret == 0) { + ret = ov7670_read(sd, REG_COM8, &com8); + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC); + } + return ret; +} + +/* + * Tweak autogain. + */ +static int ov7670_g_autogain(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + *value = (com8 & COM8_AGC) != 0; + return ret; +} + +static int ov7670_s_autogain(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (ret == 0) { + if (value) + com8 |= COM8_AGC; + else + com8 &= ~COM8_AGC; + ret = ov7670_write(sd, REG_COM8, com8); + } + return ret; +} + +/* + * Exposure is spread all over the place: top 6 bits in AECHH, middle + * 8 in AECH, and two stashed in COM1 just for the hell of it. + */ +static int ov7670_g_exp(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char com1, aech, aechh; + + ret = ov7670_read(sd, REG_COM1, &com1) + + ov7670_read(sd, REG_AECH, &aech) + + ov7670_read(sd, REG_AECHH, &aechh); + *value = ((aechh & 0x3f) << 10) | (aech << 2) | (com1 & 0x03); + return ret; +} + +static int ov7670_s_exp(struct v4l2_subdev *sd, int value) +{ + int ret; + unsigned char com1, com8, aech, aechh; + + ret = ov7670_read(sd, REG_COM1, &com1) + + ov7670_read(sd, REG_COM8, &com8); + ov7670_read(sd, REG_AECHH, &aechh); + if (ret) + return ret; + + com1 = (com1 & 0xfc) | (value & 0x03); + aech = (value >> 2) & 0xff; + aechh = (aechh & 0xc0) | ((value >> 10) & 0x3f); + ret = ov7670_write(sd, REG_COM1, com1) + + ov7670_write(sd, REG_AECH, aech) + + ov7670_write(sd, REG_AECHH, aechh); + /* Have to turn off AEC as well */ + if (ret == 0) + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AEC); + return ret; +} + +/* + * Tweak autoexposure. + */ +static int ov7670_g_autoexp(struct v4l2_subdev *sd, __s32 *value) +{ + int ret; + unsigned char com8; + enum v4l2_exposure_auto_type *atype = (enum v4l2_exposure_auto_type *) value; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (com8 & COM8_AEC) + *atype = V4L2_EXPOSURE_AUTO; + else + *atype = V4L2_EXPOSURE_MANUAL; + return ret; +} + +static int ov7670_s_autoexp(struct v4l2_subdev *sd, + enum v4l2_exposure_auto_type value) +{ + int ret; + unsigned char com8; + + ret = ov7670_read(sd, REG_COM8, &com8); + if (ret == 0) { + if (value == V4L2_EXPOSURE_AUTO) + com8 |= COM8_AEC; + else + com8 &= ~COM8_AEC; + ret = ov7670_write(sd, REG_COM8, com8); + } + return ret; +} + + + +static int ov7670_queryctrl(struct v4l2_subdev *sd, + struct v4l2_queryctrl *qc) +{ + /* Fill in min, max, step and default value for these controls. */ + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64); + case V4L2_CID_VFLIP: + case V4L2_CID_HFLIP: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(qc, 0, 256, 1, 128); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, -180, 180, 5, 0); + case V4L2_CID_GAIN: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); + case V4L2_CID_AUTOGAIN: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); + case V4L2_CID_EXPOSURE: + return v4l2_ctrl_query_fill(qc, 0, 65535, 1, 500); + case V4L2_CID_EXPOSURE_AUTO: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); + } + return -EINVAL; +} + +static int ov7670_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return ov7670_g_brightness(sd, &ctrl->value); + case V4L2_CID_CONTRAST: + return ov7670_g_contrast(sd, &ctrl->value); + case V4L2_CID_SATURATION: + return ov7670_g_sat(sd, &ctrl->value); + case V4L2_CID_HUE: + return ov7670_g_hue(sd, &ctrl->value); + case V4L2_CID_VFLIP: + return ov7670_g_vflip(sd, &ctrl->value); + case V4L2_CID_HFLIP: + return ov7670_g_hflip(sd, &ctrl->value); + case V4L2_CID_GAIN: + return ov7670_g_gain(sd, &ctrl->value); + case V4L2_CID_AUTOGAIN: + return ov7670_g_autogain(sd, &ctrl->value); + case V4L2_CID_EXPOSURE: + return ov7670_g_exp(sd, &ctrl->value); + case V4L2_CID_EXPOSURE_AUTO: + return ov7670_g_autoexp(sd, &ctrl->value); + } + return -EINVAL; +} + +static int ov7670_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + return ov7670_s_brightness(sd, ctrl->value); + case V4L2_CID_CONTRAST: + return ov7670_s_contrast(sd, ctrl->value); + case V4L2_CID_SATURATION: + return ov7670_s_sat(sd, ctrl->value); + case V4L2_CID_HUE: + return ov7670_s_hue(sd, ctrl->value); + case V4L2_CID_VFLIP: + return ov7670_s_vflip(sd, ctrl->value); + case V4L2_CID_HFLIP: + return ov7670_s_hflip(sd, ctrl->value); + case V4L2_CID_GAIN: + return ov7670_s_gain(sd, ctrl->value); + case V4L2_CID_AUTOGAIN: + return ov7670_s_autogain(sd, ctrl->value); + case V4L2_CID_EXPOSURE: + return ov7670_s_exp(sd, ctrl->value); + case V4L2_CID_EXPOSURE_AUTO: + return ov7670_s_autoexp(sd, + (enum v4l2_exposure_auto_type) ctrl->value); + } + return -EINVAL; +} + +static int ov7670_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char val = 0; + int ret; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ret = ov7670_read(sd, reg->reg & 0xff, &val); + reg->val = val; + reg->size = 1; + return ret; +} + +static int ov7670_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ov7670_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops ov7670_core_ops = { + .g_chip_ident = ov7670_g_chip_ident, + .g_ctrl = ov7670_g_ctrl, + .s_ctrl = ov7670_s_ctrl, + .queryctrl = ov7670_queryctrl, + .reset = ov7670_reset, + .init = ov7670_init, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov7670_g_register, + .s_register = ov7670_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops ov7670_video_ops = { + .enum_mbus_fmt = ov7670_enum_mbus_fmt, + .try_mbus_fmt = ov7670_try_mbus_fmt, + .s_mbus_fmt = ov7670_s_mbus_fmt, + .s_parm = ov7670_s_parm, + .g_parm = ov7670_g_parm, + .enum_frameintervals = ov7670_enum_frameintervals, + .enum_framesizes = ov7670_enum_framesizes, +}; + +static const struct v4l2_subdev_ops ov7670_ops = { + .core = &ov7670_core_ops, + .video = &ov7670_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int ov7670_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + struct ov7670_info *info; + int ret; + + info = kzalloc(sizeof(struct ov7670_info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + sd = &info->sd; + v4l2_i2c_subdev_init(sd, client, &ov7670_ops); + + info->clock_speed = 30; /* default: a guess */ + if (client->dev.platform_data) { + struct ov7670_config *config = client->dev.platform_data; + + /* + * Must apply configuration before initializing device, because it + * selects I/O method. + */ + info->min_width = config->min_width; + info->min_height = config->min_height; + info->use_smbus = config->use_smbus; + + if (config->clock_speed) + info->clock_speed = config->clock_speed; + } + + /* Make sure it's an ov7670 */ + ret = ov7670_detect(sd); + if (ret) { + v4l_dbg(1, debug, client, + "chip found @ 0x%x (%s) is not an ov7670 chip.\n", + client->addr << 1, client->adapter->name); + kfree(info); + return ret; + } + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + info->fmt = &ov7670_formats[0]; + info->sat = 128; /* Review this */ + info->clkrc = info->clock_speed / 30; + return 0; +} + + +static int ov7670_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id ov7670_id[] = { + { "ov7670", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov7670_id); + +static struct i2c_driver ov7670_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ov7670", + }, + .probe = ov7670_probe, + .remove = ov7670_remove, + .id_table = ov7670_id, +}; + +module_i2c_driver(ov7670_driver); diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c new file mode 100644 index 000000000000..045ca7f4f6ca --- /dev/null +++ b/drivers/media/i2c/s5k6aa.c @@ -0,0 +1,1667 @@ +/* + * Driver for Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor + * with embedded SoC ISP. + * + * Copyright (C) 2011, Samsung Electronics Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Based on a driver authored by Dongsoo Nathaniel Kim. + * Copyright (C) 2009, Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/media.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-mediabus.h> +#include <media/s5k6aa.h> + +static int debug; +module_param(debug, int, 0644); + +#define DRIVER_NAME "S5K6AA" + +/* The token to indicate array termination */ +#define S5K6AA_TERM 0xffff +#define S5K6AA_OUT_WIDTH_DEF 640 +#define S5K6AA_OUT_HEIGHT_DEF 480 +#define S5K6AA_WIN_WIDTH_MAX 1280 +#define S5K6AA_WIN_HEIGHT_MAX 1024 +#define S5K6AA_WIN_WIDTH_MIN 8 +#define S5K6AA_WIN_HEIGHT_MIN 8 + +/* + * H/W register Interface (0xD0000000 - 0xD0000FFF) + */ +#define AHB_MSB_ADDR_PTR 0xfcfc +#define GEN_REG_OFFSH 0xd000 +#define REG_CMDWR_ADDRH 0x0028 +#define REG_CMDWR_ADDRL 0x002a +#define REG_CMDRD_ADDRH 0x002c +#define REG_CMDRD_ADDRL 0x002e +#define REG_CMDBUF0_ADDR 0x0f12 +#define REG_CMDBUF1_ADDR 0x0f10 + +/* + * Host S/W Register interface (0x70000000 - 0x70002000) + * The value of the two most significant address bytes is 0x7000, + * (HOST_SWIF_OFFS_H). The register addresses below specify 2 LSBs. + */ +#define HOST_SWIF_OFFSH 0x7000 + +/* Initialization parameters */ +/* Master clock frequency in KHz */ +#define REG_I_INCLK_FREQ_L 0x01b8 +#define REG_I_INCLK_FREQ_H 0x01ba +#define MIN_MCLK_FREQ_KHZ 6000U +#define MAX_MCLK_FREQ_KHZ 27000U +#define REG_I_USE_NPVI_CLOCKS 0x01c6 +#define REG_I_USE_NMIPI_CLOCKS 0x01c8 + +/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */ +#define REG_I_OPCLK_4KHZ(n) ((n) * 6 + 0x01cc) +#define REG_I_MIN_OUTRATE_4KHZ(n) ((n) * 6 + 0x01ce) +#define REG_I_MAX_OUTRATE_4KHZ(n) ((n) * 6 + 0x01d0) +#define SYS_PLL_OUT_FREQ (48000000 / 4000) +#define PCLK_FREQ_MIN (24000000 / 4000) +#define PCLK_FREQ_MAX (48000000 / 4000) +#define REG_I_INIT_PARAMS_UPDATED 0x01e0 +#define REG_I_ERROR_INFO 0x01e2 + +/* General purpose parameters */ +#define REG_USER_BRIGHTNESS 0x01e4 +#define REG_USER_CONTRAST 0x01e6 +#define REG_USER_SATURATION 0x01e8 +#define REG_USER_SHARPBLUR 0x01ea + +#define REG_G_SPEC_EFFECTS 0x01ee +#define REG_G_ENABLE_PREV 0x01f0 +#define REG_G_ENABLE_PREV_CHG 0x01f2 +#define REG_G_NEW_CFG_SYNC 0x01f8 +#define REG_G_PREVZOOM_IN_WIDTH 0x020a +#define REG_G_PREVZOOM_IN_HEIGHT 0x020c +#define REG_G_PREVZOOM_IN_XOFFS 0x020e +#define REG_G_PREVZOOM_IN_YOFFS 0x0210 +#define REG_G_INPUTS_CHANGE_REQ 0x021a +#define REG_G_ACTIVE_PREV_CFG 0x021c +#define REG_G_PREV_CFG_CHG 0x021e +#define REG_G_PREV_OPEN_AFTER_CH 0x0220 +#define REG_G_PREV_CFG_ERROR 0x0222 + +/* Preview control section. n = 0...4. */ +#define PREG(n, x) ((n) * 0x26 + x) +#define REG_P_OUT_WIDTH(n) PREG(n, 0x0242) +#define REG_P_OUT_HEIGHT(n) PREG(n, 0x0244) +#define REG_P_FMT(n) PREG(n, 0x0246) +#define REG_P_MAX_OUT_RATE(n) PREG(n, 0x0248) +#define REG_P_MIN_OUT_RATE(n) PREG(n, 0x024a) +#define REG_P_PVI_MASK(n) PREG(n, 0x024c) +#define REG_P_CLK_INDEX(n) PREG(n, 0x024e) +#define REG_P_FR_RATE_TYPE(n) PREG(n, 0x0250) +#define FR_RATE_DYNAMIC 0 +#define FR_RATE_FIXED 1 +#define FR_RATE_FIXED_ACCURATE 2 +#define REG_P_FR_RATE_Q_TYPE(n) PREG(n, 0x0252) +#define FR_RATE_Q_BEST_FRRATE 1 /* Binning enabled */ +#define FR_RATE_Q_BEST_QUALITY 2 /* Binning disabled */ +/* Frame period in 0.1 ms units */ +#define REG_P_MAX_FR_TIME(n) PREG(n, 0x0254) +#define REG_P_MIN_FR_TIME(n) PREG(n, 0x0256) +/* Conversion to REG_P_[MAX/MIN]_FR_TIME value; __t: time in us */ +#define US_TO_FR_TIME(__t) ((__t) / 100) +#define S5K6AA_MIN_FR_TIME 33300 /* us */ +#define S5K6AA_MAX_FR_TIME 650000 /* us */ +#define S5K6AA_MAX_HIGHRES_FR_TIME 666 /* x100 us */ +/* The below 5 registers are for "device correction" values */ +#define REG_P_COLORTEMP(n) PREG(n, 0x025e) +#define REG_P_PREV_MIRROR(n) PREG(n, 0x0262) + +/* Extended image property controls */ +/* Exposure time in 10 us units */ +#define REG_SF_USR_EXPOSURE_L 0x03c6 +#define REG_SF_USR_EXPOSURE_H 0x03c8 +#define REG_SF_USR_EXPOSURE_CHG 0x03ca +#define REG_SF_USR_TOT_GAIN 0x03cc +#define REG_SF_USR_TOT_GAIN_CHG 0x03ce +#define REG_SF_RGAIN 0x03d0 +#define REG_SF_RGAIN_CHG 0x03d2 +#define REG_SF_GGAIN 0x03d4 +#define REG_SF_GGAIN_CHG 0x03d6 +#define REG_SF_BGAIN 0x03d8 +#define REG_SF_BGAIN_CHG 0x03da +#define REG_SF_FLICKER_QUANT 0x03dc +#define REG_SF_FLICKER_QUANT_CHG 0x03de + +/* Output interface (parallel/MIPI) setup */ +#define REG_OIF_EN_MIPI_LANES 0x03fa +#define REG_OIF_EN_PACKETS 0x03fc +#define REG_OIF_CFG_CHG 0x03fe + +/* Auto-algorithms enable mask */ +#define REG_DBG_AUTOALG_EN 0x0400 +#define AALG_ALL_EN_MASK (1 << 0) +#define AALG_AE_EN_MASK (1 << 1) +#define AALG_DIVLEI_EN_MASK (1 << 2) +#define AALG_WB_EN_MASK (1 << 3) +#define AALG_FLICKER_EN_MASK (1 << 5) +#define AALG_FIT_EN_MASK (1 << 6) +#define AALG_WRHW_EN_MASK (1 << 7) + +/* Firmware revision information */ +#define REG_FW_APIVER 0x012e +#define S5K6AAFX_FW_APIVER 0x0001 +#define REG_FW_REVISION 0x0130 + +/* For now we use only one user configuration register set */ +#define S5K6AA_MAX_PRESETS 1 + +static const char * const s5k6aa_supply_names[] = { + "vdd_core", /* Digital core supply 1.5V (1.4V to 1.6V) */ + "vdda", /* Analog power supply 2.8V (2.6V to 3.0V) */ + "vdd_reg", /* Regulator input power 1.8V (1.7V to 1.9V) + or 2.8V (2.6V to 3.0) */ + "vddio", /* I/O supply 1.8V (1.65V to 1.95V) + or 2.8V (2.5V to 3.1V) */ +}; +#define S5K6AA_NUM_SUPPLIES ARRAY_SIZE(s5k6aa_supply_names) + +enum s5k6aa_gpio_id { + STBY, + RST, + GPIO_NUM, +}; + +struct s5k6aa_regval { + u16 addr; + u16 val; +}; + +struct s5k6aa_pixfmt { + enum v4l2_mbus_pixelcode code; + u32 colorspace; + /* REG_P_FMT(x) register value */ + u16 reg_p_fmt; +}; + +struct s5k6aa_preset { + /* output pixel format and resolution */ + struct v4l2_mbus_framefmt mbus_fmt; + u8 clk_id; + u8 index; +}; + +struct s5k6aa_ctrls { + struct v4l2_ctrl_handler handler; + /* Auto / manual white balance cluster */ + struct v4l2_ctrl *awb; + struct v4l2_ctrl *gain_red; + struct v4l2_ctrl *gain_blue; + struct v4l2_ctrl *gain_green; + /* Mirror cluster */ + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + /* Auto exposure / manual exposure and gain cluster */ + struct v4l2_ctrl *auto_exp; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *gain; +}; + +struct s5k6aa_interval { + u16 reg_fr_time; + struct v4l2_fract interval; + /* Maximum rectangle for the interval */ + struct v4l2_frmsize_discrete size; +}; + +struct s5k6aa { + struct v4l2_subdev sd; + struct media_pad pad; + + enum v4l2_mbus_type bus_type; + u8 mipi_lanes; + + int (*s_power)(int enable); + struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES]; + struct s5k6aa_gpio gpio[GPIO_NUM]; + + /* external master clock frequency */ + unsigned long mclk_frequency; + /* ISP internal master clock frequency */ + u16 clk_fop; + /* output pixel clock frequency range */ + u16 pclk_fmin; + u16 pclk_fmax; + + unsigned int inv_hflip:1; + unsigned int inv_vflip:1; + + /* protects the struct members below */ + struct mutex lock; + + /* sensor matrix scan window */ + struct v4l2_rect ccd_rect; + + struct s5k6aa_ctrls ctrls; + struct s5k6aa_preset presets[S5K6AA_MAX_PRESETS]; + struct s5k6aa_preset *preset; + const struct s5k6aa_interval *fiv; + + unsigned int streaming:1; + unsigned int apply_cfg:1; + unsigned int apply_crop:1; + unsigned int power; +}; + +static struct s5k6aa_regval s5k6aa_analog_config[] = { + /* Analog settings */ + { 0x112a, 0x0000 }, { 0x1132, 0x0000 }, + { 0x113e, 0x0000 }, { 0x115c, 0x0000 }, + { 0x1164, 0x0000 }, { 0x1174, 0x0000 }, + { 0x1178, 0x0000 }, { 0x077a, 0x0000 }, + { 0x077c, 0x0000 }, { 0x077e, 0x0000 }, + { 0x0780, 0x0000 }, { 0x0782, 0x0000 }, + { 0x0784, 0x0000 }, { 0x0786, 0x0000 }, + { 0x0788, 0x0000 }, { 0x07a2, 0x0000 }, + { 0x07a4, 0x0000 }, { 0x07a6, 0x0000 }, + { 0x07a8, 0x0000 }, { 0x07b6, 0x0000 }, + { 0x07b8, 0x0002 }, { 0x07ba, 0x0004 }, + { 0x07bc, 0x0004 }, { 0x07be, 0x0005 }, + { 0x07c0, 0x0005 }, { S5K6AA_TERM, 0 }, +}; + +/* TODO: Add RGB888 and Bayer format */ +static const struct s5k6aa_pixfmt s5k6aa_formats[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 }, + /* range 16-240 */ + { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_REC709, 6 }, + { V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 }, +}; + +static const struct s5k6aa_interval s5k6aa_intervals[] = { + { 1000, {10000, 1000000}, {1280, 1024} }, /* 10 fps */ + { 666, {15000, 1000000}, {1280, 1024} }, /* 15 fps */ + { 500, {20000, 1000000}, {1280, 720} }, /* 20 fps */ + { 400, {25000, 1000000}, {640, 480} }, /* 25 fps */ + { 333, {33300, 1000000}, {640, 480} }, /* 30 fps */ +}; + +#define S5K6AA_INTERVAL_DEF_INDEX 1 /* 15 fps */ + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct s5k6aa, ctrls.handler)->sd; +} + +static inline struct s5k6aa *to_s5k6aa(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5k6aa, sd); +} + +/* Set initial values for all preview presets */ +static void s5k6aa_presets_data_init(struct s5k6aa *s5k6aa) +{ + struct s5k6aa_preset *preset = &s5k6aa->presets[0]; + int i; + + for (i = 0; i < S5K6AA_MAX_PRESETS; i++) { + preset->mbus_fmt.width = S5K6AA_OUT_WIDTH_DEF; + preset->mbus_fmt.height = S5K6AA_OUT_HEIGHT_DEF; + preset->mbus_fmt.code = s5k6aa_formats[0].code; + preset->index = i; + preset->clk_id = 0; + preset++; + } + + s5k6aa->fiv = &s5k6aa_intervals[S5K6AA_INTERVAL_DEF_INDEX]; + s5k6aa->preset = &s5k6aa->presets[0]; +} + +static int s5k6aa_i2c_read(struct i2c_client *client, u16 addr, u16 *val) +{ + u8 wbuf[2] = {addr >> 8, addr & 0xFF}; + struct i2c_msg msg[2]; + u8 rbuf[2]; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 2; + msg[0].buf = wbuf; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = rbuf; + + ret = i2c_transfer(client->adapter, msg, 2); + *val = be16_to_cpu(*((u16 *)rbuf)); + + v4l2_dbg(3, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val); + + return ret == 2 ? 0 : ret; +} + +static int s5k6aa_i2c_write(struct i2c_client *client, u16 addr, u16 val) +{ + u8 buf[4] = {addr >> 8, addr & 0xFF, val >> 8, val & 0xFF}; + + int ret = i2c_master_send(client, buf, 4); + v4l2_dbg(3, debug, client, "i2c_write: 0x%04X : 0x%04x\n", addr, val); + + return ret == 4 ? 0 : ret; +} + +/* The command register write, assumes Command_Wr_addH = 0x7000. */ +static int s5k6aa_write(struct i2c_client *c, u16 addr, u16 val) +{ + int ret = s5k6aa_i2c_write(c, REG_CMDWR_ADDRL, addr); + if (ret) + return ret; + return s5k6aa_i2c_write(c, REG_CMDBUF0_ADDR, val); +} + +/* The command register read, assumes Command_Rd_addH = 0x7000. */ +static int s5k6aa_read(struct i2c_client *client, u16 addr, u16 *val) +{ + int ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRL, addr); + if (ret) + return ret; + return s5k6aa_i2c_read(client, REG_CMDBUF0_ADDR, val); +} + +static int s5k6aa_write_array(struct v4l2_subdev *sd, + const struct s5k6aa_regval *msg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 addr_incr = 0; + int ret = 0; + + while (msg->addr != S5K6AA_TERM) { + if (addr_incr != 2) + ret = s5k6aa_i2c_write(client, REG_CMDWR_ADDRL, + msg->addr); + if (ret) + break; + ret = s5k6aa_i2c_write(client, REG_CMDBUF0_ADDR, msg->val); + if (ret) + break; + /* Assume that msg->addr is always less than 0xfffc */ + addr_incr = (msg + 1)->addr - msg->addr; + msg++; + } + + return ret; +} + +/* Configure the AHB high address bytes for GTG registers access */ +static int s5k6aa_set_ahb_address(struct i2c_client *client) +{ + int ret = s5k6aa_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH); + if (ret) + return ret; + ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRH, HOST_SWIF_OFFSH); + if (ret) + return ret; + return s5k6aa_i2c_write(client, REG_CMDWR_ADDRH, HOST_SWIF_OFFSH); +} + +/** + * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration + * + * Configure the internal ISP PLL for the required output frequency. + * Locking: called with s5k6aa.lock mutex held. + */ +static int s5k6aa_configure_pixel_clocks(struct s5k6aa *s5k6aa) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + unsigned long fmclk = s5k6aa->mclk_frequency / 1000; + u16 status; + int ret; + + if (WARN(fmclk < MIN_MCLK_FREQ_KHZ || fmclk > MAX_MCLK_FREQ_KHZ, + "Invalid clock frequency: %ld\n", fmclk)) + return -EINVAL; + + s5k6aa->pclk_fmin = PCLK_FREQ_MIN; + s5k6aa->pclk_fmax = PCLK_FREQ_MAX; + s5k6aa->clk_fop = SYS_PLL_OUT_FREQ; + + /* External input clock frequency in kHz */ + ret = s5k6aa_write(c, REG_I_INCLK_FREQ_H, fmclk >> 16); + if (!ret) + ret = s5k6aa_write(c, REG_I_INCLK_FREQ_L, fmclk & 0xFFFF); + if (!ret) + ret = s5k6aa_write(c, REG_I_USE_NPVI_CLOCKS, 1); + /* Internal PLL frequency */ + if (!ret) + ret = s5k6aa_write(c, REG_I_OPCLK_4KHZ(0), s5k6aa->clk_fop); + if (!ret) + ret = s5k6aa_write(c, REG_I_MIN_OUTRATE_4KHZ(0), + s5k6aa->pclk_fmin); + if (!ret) + ret = s5k6aa_write(c, REG_I_MAX_OUTRATE_4KHZ(0), + s5k6aa->pclk_fmax); + if (!ret) + ret = s5k6aa_write(c, REG_I_INIT_PARAMS_UPDATED, 1); + if (!ret) + ret = s5k6aa_read(c, REG_I_ERROR_INFO, &status); + + return ret ? ret : (status ? -EINVAL : 0); +} + +/* Set horizontal and vertical image flipping */ +static int s5k6aa_set_mirror(struct s5k6aa *s5k6aa, int horiz_flip) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int index = s5k6aa->preset->index; + + unsigned int vflip = s5k6aa->ctrls.vflip->val ^ s5k6aa->inv_vflip; + unsigned int flip = (horiz_flip ^ s5k6aa->inv_hflip) | (vflip << 1); + + return s5k6aa_write(client, REG_P_PREV_MIRROR(index), flip); +} + +/* Configure auto/manual white balance and R/G/B gains */ +static int s5k6aa_set_awb(struct s5k6aa *s5k6aa, int awb) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls; + u16 reg; + + int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, ®); + + if (!ret && !awb) { + ret = s5k6aa_write(c, REG_SF_RGAIN, ctrls->gain_red->val); + if (!ret) + ret = s5k6aa_write(c, REG_SF_RGAIN_CHG, 1); + if (ret) + return ret; + + ret = s5k6aa_write(c, REG_SF_GGAIN, ctrls->gain_green->val); + if (!ret) + ret = s5k6aa_write(c, REG_SF_GGAIN_CHG, 1); + if (ret) + return ret; + + ret = s5k6aa_write(c, REG_SF_BGAIN, ctrls->gain_blue->val); + if (!ret) + ret = s5k6aa_write(c, REG_SF_BGAIN_CHG, 1); + } + if (!ret) { + reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK; + ret = s5k6aa_write(c, REG_DBG_AUTOALG_EN, reg); + } + + return ret; +} + +/* Program FW with exposure time, 'exposure' in us units */ +static int s5k6aa_set_user_exposure(struct i2c_client *client, int exposure) +{ + unsigned int time = exposure / 10; + + int ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_L, time & 0xffff); + if (!ret) + ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_H, time >> 16); + if (ret) + return ret; + return s5k6aa_write(client, REG_SF_USR_EXPOSURE_CHG, 1); +} + +static int s5k6aa_set_user_gain(struct i2c_client *client, int gain) +{ + int ret = s5k6aa_write(client, REG_SF_USR_TOT_GAIN, gain); + if (ret) + return ret; + return s5k6aa_write(client, REG_SF_USR_TOT_GAIN_CHG, 1); +} + +/* Set auto/manual exposure and total gain */ +static int s5k6aa_set_auto_exposure(struct s5k6aa *s5k6aa, int value) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + unsigned int exp_time = s5k6aa->ctrls.exposure->val; + u16 auto_alg; + + int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &auto_alg); + if (ret) + return ret; + + v4l2_dbg(1, debug, c, "man_exp: %d, auto_exp: %d, a_alg: 0x%x\n", + exp_time, value, auto_alg); + + if (value == V4L2_EXPOSURE_AUTO) { + auto_alg |= AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK; + } else { + ret = s5k6aa_set_user_exposure(c, exp_time); + if (ret) + return ret; + ret = s5k6aa_set_user_gain(c, s5k6aa->ctrls.gain->val); + if (ret) + return ret; + auto_alg &= ~(AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK); + } + + return s5k6aa_write(c, REG_DBG_AUTOALG_EN, auto_alg); +} + +static int s5k6aa_set_anti_flicker(struct s5k6aa *s5k6aa, int value) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + u16 auto_alg; + int ret; + + ret = s5k6aa_read(client, REG_DBG_AUTOALG_EN, &auto_alg); + if (ret) + return ret; + + if (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) { + auto_alg |= AALG_FLICKER_EN_MASK; + } else { + auto_alg &= ~AALG_FLICKER_EN_MASK; + /* The V4L2_CID_LINE_FREQUENCY control values match + * the register values */ + ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT, value); + if (ret) + return ret; + ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT_CHG, 1); + if (ret) + return ret; + } + + return s5k6aa_write(client, REG_DBG_AUTOALG_EN, auto_alg); +} + +static int s5k6aa_set_colorfx(struct s5k6aa *s5k6aa, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + static const struct v4l2_control colorfx[] = { + { V4L2_COLORFX_NONE, 0 }, + { V4L2_COLORFX_BW, 1 }, + { V4L2_COLORFX_NEGATIVE, 2 }, + { V4L2_COLORFX_SEPIA, 3 }, + { V4L2_COLORFX_SKY_BLUE, 4 }, + { V4L2_COLORFX_SKETCH, 5 }, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(colorfx); i++) { + if (colorfx[i].id == val) + return s5k6aa_write(client, REG_G_SPEC_EFFECTS, + colorfx[i].value); + } + return -EINVAL; +} + +static int s5k6aa_preview_config_status(struct i2c_client *client) +{ + u16 error = 0; + int ret = s5k6aa_read(client, REG_G_PREV_CFG_ERROR, &error); + + v4l2_dbg(1, debug, client, "error: 0x%x (%d)\n", error, ret); + return ret ? ret : (error ? -EINVAL : 0); +} + +static int s5k6aa_get_pixfmt_index(struct s5k6aa *s5k6aa, + struct v4l2_mbus_framefmt *mf) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s5k6aa_formats); i++) + if (mf->colorspace == s5k6aa_formats[i].colorspace && + mf->code == s5k6aa_formats[i].code) + return i; + return 0; +} + +static int s5k6aa_set_output_framefmt(struct s5k6aa *s5k6aa, + struct s5k6aa_preset *preset) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int fmt_index = s5k6aa_get_pixfmt_index(s5k6aa, &preset->mbus_fmt); + int ret; + + ret = s5k6aa_write(client, REG_P_OUT_WIDTH(preset->index), + preset->mbus_fmt.width); + if (!ret) + ret = s5k6aa_write(client, REG_P_OUT_HEIGHT(preset->index), + preset->mbus_fmt.height); + if (!ret) + ret = s5k6aa_write(client, REG_P_FMT(preset->index), + s5k6aa_formats[fmt_index].reg_p_fmt); + return ret; +} + +static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa) +{ + struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd); + struct v4l2_rect *r = &s5k6aa->ccd_rect; + int ret; + + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width); + if (!ret) + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height); + if (!ret) + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left); + if (!ret) + ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top); + if (!ret) + ret = s5k6aa_write(c, REG_G_INPUTS_CHANGE_REQ, 1); + if (!ret) + s5k6aa->apply_crop = 0; + + return ret; +} + +/** + * s5k6aa_configure_video_bus - configure the video output interface + * @bus_type: video bus type: parallel or MIPI-CSI + * @nlanes: number of MIPI lanes to be used (MIPI-CSI only) + * + * Note: Only parallel bus operation has been tested. + */ +static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa, + enum v4l2_mbus_type bus_type, int nlanes) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + u16 cfg = 0; + int ret; + + /* + * TODO: The sensor is supposed to support BT.601 and BT.656 + * but there is nothing indicating how to switch between both + * in the datasheet. For now default BT.601 interface is assumed. + */ + if (bus_type == V4L2_MBUS_CSI2) + cfg = nlanes; + else if (bus_type != V4L2_MBUS_PARALLEL) + return -EINVAL; + + ret = s5k6aa_write(client, REG_OIF_EN_MIPI_LANES, cfg); + if (ret) + return ret; + return s5k6aa_write(client, REG_OIF_CFG_CHG, 1); +} + +/* This function should be called when switching to new user configuration set*/ +static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout, + int cid) +{ + unsigned long end = jiffies + msecs_to_jiffies(timeout); + u16 reg = 1; + int ret; + + ret = s5k6aa_write(client, REG_G_ACTIVE_PREV_CFG, cid); + if (!ret) + ret = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1); + if (!ret) + ret = s5k6aa_write(client, REG_G_NEW_CFG_SYNC, 1); + if (timeout == 0) + return ret; + + while (ret >= 0 && time_is_after_jiffies(end)) { + ret = s5k6aa_read(client, REG_G_NEW_CFG_SYNC, ®); + if (!reg) + return 0; + usleep_range(1000, 5000); + } + return ret ? ret : -ETIMEDOUT; +} + +/** + * s5k6aa_set_prev_config - write user preview register set + * + * Configure output resolution and color fromat, pixel clock + * frequency range, device frame rate type and frame period range. + */ +static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa, + struct s5k6aa_preset *preset) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int idx = preset->index; + u16 frame_rate_q; + int ret; + + if (s5k6aa->fiv->reg_fr_time >= S5K6AA_MAX_HIGHRES_FR_TIME) + frame_rate_q = FR_RATE_Q_BEST_FRRATE; + else + frame_rate_q = FR_RATE_Q_BEST_QUALITY; + + ret = s5k6aa_set_output_framefmt(s5k6aa, preset); + if (!ret) + ret = s5k6aa_write(client, REG_P_MAX_OUT_RATE(idx), + s5k6aa->pclk_fmax); + if (!ret) + ret = s5k6aa_write(client, REG_P_MIN_OUT_RATE(idx), + s5k6aa->pclk_fmin); + if (!ret) + ret = s5k6aa_write(client, REG_P_CLK_INDEX(idx), + preset->clk_id); + if (!ret) + ret = s5k6aa_write(client, REG_P_FR_RATE_TYPE(idx), + FR_RATE_DYNAMIC); + if (!ret) + ret = s5k6aa_write(client, REG_P_FR_RATE_Q_TYPE(idx), + frame_rate_q); + if (!ret) + ret = s5k6aa_write(client, REG_P_MAX_FR_TIME(idx), + s5k6aa->fiv->reg_fr_time + 33); + if (!ret) + ret = s5k6aa_write(client, REG_P_MIN_FR_TIME(idx), + s5k6aa->fiv->reg_fr_time - 33); + if (!ret) + ret = s5k6aa_new_config_sync(client, 250, idx); + if (!ret) + ret = s5k6aa_preview_config_status(client); + if (!ret) + s5k6aa->apply_cfg = 0; + + v4l2_dbg(1, debug, client, "Frame interval: %d +/- 3.3ms. (%d)\n", + s5k6aa->fiv->reg_fr_time, ret); + return ret; +} + +/** + * s5k6aa_initialize_isp - basic ISP MCU initialization + * + * Configure AHB addresses for registers read/write; configure PLLs for + * required output pixel clock. The ISP power supply needs to be already + * enabled, with an optional H/W reset. + * Locking: called with s5k6aa.lock mutex held. + */ +static int s5k6aa_initialize_isp(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret; + + s5k6aa->apply_crop = 1; + s5k6aa->apply_cfg = 1; + msleep(100); + + ret = s5k6aa_set_ahb_address(client); + if (ret) + return ret; + ret = s5k6aa_configure_video_bus(s5k6aa, s5k6aa->bus_type, + s5k6aa->mipi_lanes); + if (ret) + return ret; + ret = s5k6aa_write_array(sd, s5k6aa_analog_config); + if (ret) + return ret; + msleep(20); + + return s5k6aa_configure_pixel_clocks(s5k6aa); +} + +static int s5k6aa_gpio_set_value(struct s5k6aa *priv, int id, u32 val) +{ + if (!gpio_is_valid(priv->gpio[id].gpio)) + return 0; + gpio_set_value(priv->gpio[id].gpio, !!val); + return 1; +} + +static int s5k6aa_gpio_assert(struct s5k6aa *priv, int id) +{ + return s5k6aa_gpio_set_value(priv, id, priv->gpio[id].level); +} + +static int s5k6aa_gpio_deassert(struct s5k6aa *priv, int id) +{ + return s5k6aa_gpio_set_value(priv, id, !priv->gpio[id].level); +} + +static int __s5k6aa_power_on(struct s5k6aa *s5k6aa) +{ + int ret; + + ret = regulator_bulk_enable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); + if (ret) + return ret; + if (s5k6aa_gpio_deassert(s5k6aa, STBY)) + usleep_range(150, 200); + + if (s5k6aa->s_power) + ret = s5k6aa->s_power(1); + usleep_range(4000, 4000); + + if (s5k6aa_gpio_deassert(s5k6aa, RST)) + msleep(20); + + return ret; +} + +static int __s5k6aa_power_off(struct s5k6aa *s5k6aa) +{ + int ret; + + if (s5k6aa_gpio_assert(s5k6aa, RST)) + usleep_range(100, 150); + + if (s5k6aa->s_power) { + ret = s5k6aa->s_power(0); + if (ret) + return ret; + } + if (s5k6aa_gpio_assert(s5k6aa, STBY)) + usleep_range(50, 100); + s5k6aa->streaming = 0; + + return regulator_bulk_disable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); +} + +/* + * V4L2 subdev core and video operations + */ +static int s5k6aa_set_power(struct v4l2_subdev *sd, int on) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret = 0; + + mutex_lock(&s5k6aa->lock); + + if (!on == s5k6aa->power) { + if (on) { + ret = __s5k6aa_power_on(s5k6aa); + if (!ret) + ret = s5k6aa_initialize_isp(sd); + } else { + ret = __s5k6aa_power_off(s5k6aa); + } + + if (!ret) + s5k6aa->power += on ? 1 : -1; + } + + mutex_unlock(&s5k6aa->lock); + + if (!on || ret || s5k6aa->power != 1) + return ret; + + return v4l2_ctrl_handler_setup(sd->ctrl_handler); +} + +static int __s5k6aa_stream(struct s5k6aa *s5k6aa, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + int ret = 0; + + ret = s5k6aa_write(client, REG_G_ENABLE_PREV, enable); + if (!ret) + ret = s5k6aa_write(client, REG_G_ENABLE_PREV_CHG, 1); + if (!ret) + s5k6aa->streaming = enable; + + return ret; +} + +static int s5k6aa_s_stream(struct v4l2_subdev *sd, int on) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret = 0; + + mutex_lock(&s5k6aa->lock); + + if (s5k6aa->streaming == !on) { + if (!ret && s5k6aa->apply_cfg) + ret = s5k6aa_set_prev_config(s5k6aa, s5k6aa->preset); + if (s5k6aa->apply_crop) + ret = s5k6aa_set_input_params(s5k6aa); + if (!ret) + ret = __s5k6aa_stream(s5k6aa, !!on); + } + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static int s5k6aa_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + + mutex_lock(&s5k6aa->lock); + fi->interval = s5k6aa->fiv->interval; + mutex_unlock(&s5k6aa->lock); + + return 0; +} + +static int __s5k6aa_set_frame_interval(struct s5k6aa *s5k6aa, + struct v4l2_subdev_frame_interval *fi) +{ + struct v4l2_mbus_framefmt *mbus_fmt = &s5k6aa->preset->mbus_fmt; + const struct s5k6aa_interval *fiv = &s5k6aa_intervals[0]; + unsigned int err, min_err = UINT_MAX; + unsigned int i, fr_time; + + if (fi->interval.denominator == 0) + return -EINVAL; + + fr_time = fi->interval.numerator * 10000 / fi->interval.denominator; + + for (i = 0; i < ARRAY_SIZE(s5k6aa_intervals); i++) { + const struct s5k6aa_interval *iv = &s5k6aa_intervals[i]; + + if (mbus_fmt->width > iv->size.width || + mbus_fmt->height > iv->size.height) + continue; + + err = abs(iv->reg_fr_time - fr_time); + if (err < min_err) { + fiv = iv; + min_err = err; + } + } + s5k6aa->fiv = fiv; + + v4l2_dbg(1, debug, &s5k6aa->sd, "Changed frame interval to %d us\n", + fiv->reg_fr_time * 100); + return 0; +} + +static int s5k6aa_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret; + + v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n", + fi->interval.numerator, fi->interval.denominator); + + mutex_lock(&s5k6aa->lock); + ret = __s5k6aa_set_frame_interval(s5k6aa, fi); + s5k6aa->apply_cfg = 1; + + mutex_unlock(&s5k6aa->lock); + return ret; +} + +/* + * V4L2 subdev pad level and video operations + */ +static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_interval_enum *fie) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + const struct s5k6aa_interval *fi; + int ret = 0; + + if (fie->index > ARRAY_SIZE(s5k6aa_intervals)) + return -EINVAL; + + v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN, + S5K6AA_WIN_WIDTH_MAX, 1, + &fie->height, S5K6AA_WIN_HEIGHT_MIN, + S5K6AA_WIN_HEIGHT_MAX, 1, 0); + + mutex_lock(&s5k6aa->lock); + fi = &s5k6aa_intervals[fie->index]; + if (fie->width > fi->size.width || fie->height > fi->size.height) + ret = -EINVAL; + else + fie->interval = fi->interval; + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static int s5k6aa_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5k6aa_formats)) + return -EINVAL; + + code->code = s5k6aa_formats[code->index].code; + return 0; +} + +static int s5k6aa_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + int i = ARRAY_SIZE(s5k6aa_formats); + + if (fse->index > 0) + return -EINVAL; + + while (--i) + if (fse->code == s5k6aa_formats[i].code) + break; + + fse->code = s5k6aa_formats[i].code; + fse->min_width = S5K6AA_WIN_WIDTH_MIN; + fse->max_width = S5K6AA_WIN_WIDTH_MAX; + fse->max_height = S5K6AA_WIN_HEIGHT_MIN; + fse->min_height = S5K6AA_WIN_HEIGHT_MAX; + + return 0; +} + +static struct v4l2_rect * +__s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) + return &s5k6aa->ccd_rect; + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_crop(fh, 0); + + return NULL; +} + +static void s5k6aa_try_format(struct s5k6aa *s5k6aa, + struct v4l2_mbus_framefmt *mf) +{ + unsigned int index; + + v4l_bound_align_image(&mf->width, S5K6AA_WIN_WIDTH_MIN, + S5K6AA_WIN_WIDTH_MAX, 1, + &mf->height, S5K6AA_WIN_HEIGHT_MIN, + S5K6AA_WIN_HEIGHT_MAX, 1, 0); + + if (mf->colorspace != V4L2_COLORSPACE_JPEG && + mf->colorspace != V4L2_COLORSPACE_REC709) + mf->colorspace = V4L2_COLORSPACE_JPEG; + + index = s5k6aa_get_pixfmt_index(s5k6aa, mf); + + mf->colorspace = s5k6aa_formats[index].colorspace; + mf->code = s5k6aa_formats[index].code; + mf->field = V4L2_FIELD_NONE; +} + +static int s5k6aa_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct v4l2_mbus_framefmt *mf; + + memset(fmt->reserved, 0, sizeof(fmt->reserved)); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, 0); + fmt->format = *mf; + return 0; + } + + mutex_lock(&s5k6aa->lock); + fmt->format = s5k6aa->preset->mbus_fmt; + mutex_unlock(&s5k6aa->lock); + + return 0; +} + +static int s5k6aa_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct s5k6aa_preset *preset = s5k6aa->preset; + struct v4l2_mbus_framefmt *mf; + struct v4l2_rect *crop; + int ret = 0; + + mutex_lock(&s5k6aa->lock); + s5k6aa_try_format(s5k6aa, &fmt->format); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + crop = v4l2_subdev_get_try_crop(fh, 0); + } else { + if (s5k6aa->streaming) { + ret = -EBUSY; + } else { + mf = &preset->mbus_fmt; + crop = &s5k6aa->ccd_rect; + s5k6aa->apply_cfg = 1; + } + } + + if (ret == 0) { + struct v4l2_subdev_frame_interval fiv = { + .interval = {0, 1} + }; + + *mf = fmt->format; + /* + * Make sure the crop window is valid, i.e. its size is + * greater than the output window, as the ISP supports + * only down-scaling. + */ + crop->width = clamp_t(unsigned int, crop->width, mf->width, + S5K6AA_WIN_WIDTH_MAX); + crop->height = clamp_t(unsigned int, crop->height, mf->height, + S5K6AA_WIN_HEIGHT_MAX); + crop->left = clamp_t(unsigned int, crop->left, 0, + S5K6AA_WIN_WIDTH_MAX - crop->width); + crop->top = clamp_t(unsigned int, crop->top, 0, + S5K6AA_WIN_HEIGHT_MAX - crop->height); + + /* Reset to minimum possible frame interval */ + ret = __s5k6aa_set_frame_interval(s5k6aa, &fiv); + } + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static int s5k6aa_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct v4l2_rect *rect; + + memset(crop->reserved, 0, sizeof(crop->reserved)); + mutex_lock(&s5k6aa->lock); + + rect = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which); + if (rect) + crop->rect = *rect; + + mutex_unlock(&s5k6aa->lock); + + v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n", + rect->left, rect->top, rect->width, rect->height); + + return 0; +} + +static int s5k6aa_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + struct v4l2_mbus_framefmt *mf; + unsigned int max_x, max_y; + struct v4l2_rect *crop_r; + + mutex_lock(&s5k6aa->lock); + crop_r = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which); + + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + mf = &s5k6aa->preset->mbus_fmt; + s5k6aa->apply_crop = 1; + } else { + mf = v4l2_subdev_get_try_format(fh, 0); + } + v4l_bound_align_image(&crop->rect.width, mf->width, + S5K6AA_WIN_WIDTH_MAX, 1, + &crop->rect.height, mf->height, + S5K6AA_WIN_HEIGHT_MAX, 1, 0); + + max_x = (S5K6AA_WIN_WIDTH_MAX - crop->rect.width) & ~1; + max_y = (S5K6AA_WIN_HEIGHT_MAX - crop->rect.height) & ~1; + + crop->rect.left = clamp_t(unsigned int, crop->rect.left, 0, max_x); + crop->rect.top = clamp_t(unsigned int, crop->rect.top, 0, max_y); + + *crop_r = crop->rect; + + mutex_unlock(&s5k6aa->lock); + + v4l2_dbg(1, debug, sd, "Set crop rectangle: (%d,%d)/%dx%d\n", + crop_r->left, crop_r->top, crop_r->width, crop_r->height); + + return 0; +} + +static const struct v4l2_subdev_pad_ops s5k6aa_pad_ops = { + .enum_mbus_code = s5k6aa_enum_mbus_code, + .enum_frame_size = s5k6aa_enum_frame_size, + .enum_frame_interval = s5k6aa_enum_frame_interval, + .get_fmt = s5k6aa_get_fmt, + .set_fmt = s5k6aa_set_fmt, + .get_crop = s5k6aa_get_crop, + .set_crop = s5k6aa_set_crop, +}; + +static const struct v4l2_subdev_video_ops s5k6aa_video_ops = { + .g_frame_interval = s5k6aa_g_frame_interval, + .s_frame_interval = s5k6aa_s_frame_interval, + .s_stream = s5k6aa_s_stream, +}; + +/* + * V4L2 subdev controls + */ + +static int s5k6aa_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int idx, err = 0; + + v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val); + + mutex_lock(&s5k6aa->lock); + /* + * If the device is not powered up by the host driver do + * not apply any controls to H/W at this time. Instead + * the controls will be restored right after power-up. + */ + if (s5k6aa->power == 0) + goto unlock; + idx = s5k6aa->preset->index; + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + err = s5k6aa_set_awb(s5k6aa, ctrl->val); + break; + + case V4L2_CID_BRIGHTNESS: + err = s5k6aa_write(client, REG_USER_BRIGHTNESS, ctrl->val); + break; + + case V4L2_CID_COLORFX: + err = s5k6aa_set_colorfx(s5k6aa, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + err = s5k6aa_write(client, REG_USER_CONTRAST, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + err = s5k6aa_set_auto_exposure(s5k6aa, ctrl->val); + break; + + case V4L2_CID_HFLIP: + err = s5k6aa_set_mirror(s5k6aa, ctrl->val); + if (err) + break; + err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1); + break; + + case V4L2_CID_POWER_LINE_FREQUENCY: + err = s5k6aa_set_anti_flicker(s5k6aa, ctrl->val); + break; + + case V4L2_CID_SATURATION: + err = s5k6aa_write(client, REG_USER_SATURATION, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + err = s5k6aa_write(client, REG_USER_SHARPBLUR, ctrl->val); + break; + + case V4L2_CID_WHITE_BALANCE_TEMPERATURE: + err = s5k6aa_write(client, REG_P_COLORTEMP(idx), ctrl->val); + if (err) + break; + err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1); + break; + } +unlock: + mutex_unlock(&s5k6aa->lock); + return err; +} + +static const struct v4l2_ctrl_ops s5k6aa_ctrl_ops = { + .s_ctrl = s5k6aa_s_ctrl, +}; + +static int s5k6aa_log_status(struct v4l2_subdev *sd) +{ + v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name); + return 0; +} + +#define V4L2_CID_RED_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1001) +#define V4L2_CID_GREEN_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1002) +#define V4L2_CID_BLUE_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1003) + +static const struct v4l2_ctrl_config s5k6aa_ctrls[] = { + { + .ops = &s5k6aa_ctrl_ops, + .id = V4L2_CID_RED_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Red", + .min = 0, + .max = 256, + .def = 127, + .step = 1, + }, { + .ops = &s5k6aa_ctrl_ops, + .id = V4L2_CID_GREEN_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Green", + .min = 0, + .max = 256, + .def = 127, + .step = 1, + }, { + .ops = &s5k6aa_ctrl_ops, + .id = V4L2_CID_BLUE_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain, Blue", + .min = 0, + .max = 256, + .def = 127, + .step = 1, + }, +}; + +static int s5k6aa_initialize_ctrls(struct s5k6aa *s5k6aa) +{ + const struct v4l2_ctrl_ops *ops = &s5k6aa_ctrl_ops; + struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + + int ret = v4l2_ctrl_handler_init(hdl, 16); + if (ret) + return ret; + /* Auto white balance cluster */ + ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 1); + ctrls->gain_red = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[0], NULL); + ctrls->gain_green = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[1], NULL); + ctrls->gain_blue = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[2], NULL); + v4l2_ctrl_auto_cluster(4, &ctrls->awb, 0, false); + + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_cluster(2, &ctrls->hflip); + + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); + /* Exposure time: x 1 us */ + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, + 0, 6000000U, 1, 100000U); + /* Total gain: 256 <=> 1x */ + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, + 0, 256, 1, 256); + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX, + V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE); + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE, + 0, 256, 1, 0); + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0); + + if (hdl->error) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + + s5k6aa->sd.ctrl_handler = hdl; + return 0; +} + +/* + * V4L2 subdev internal operations + */ +static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + struct v4l2_rect *crop = v4l2_subdev_get_try_crop(fh, 0); + + format->colorspace = s5k6aa_formats[0].colorspace; + format->code = s5k6aa_formats[0].code; + format->width = S5K6AA_OUT_WIDTH_DEF; + format->height = S5K6AA_OUT_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + + crop->width = S5K6AA_WIN_WIDTH_MAX; + crop->height = S5K6AA_WIN_HEIGHT_MAX; + crop->left = 0; + crop->top = 0; + + return 0; +} + +static int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd); + u16 api_ver = 0, fw_rev = 0; + + int ret = s5k6aa_set_ahb_address(client); + + if (!ret) + ret = s5k6aa_read(client, REG_FW_APIVER, &api_ver); + if (!ret) + ret = s5k6aa_read(client, REG_FW_REVISION, &fw_rev); + if (ret) { + v4l2_err(&s5k6aa->sd, "FW revision check failed!\n"); + return ret; + } + + v4l2_info(&s5k6aa->sd, "FW API ver.: 0x%X, FW rev.: 0x%X\n", + api_ver, fw_rev); + + return api_ver == S5K6AAFX_FW_APIVER ? 0 : -ENODEV; +} + +static int s5k6aa_registered(struct v4l2_subdev *sd) +{ + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + int ret; + + mutex_lock(&s5k6aa->lock); + ret = __s5k6aa_power_on(s5k6aa); + if (!ret) { + msleep(100); + ret = s5k6aa_check_fw_revision(s5k6aa); + __s5k6aa_power_off(s5k6aa); + } + mutex_unlock(&s5k6aa->lock); + + return ret; +} + +static const struct v4l2_subdev_internal_ops s5k6aa_subdev_internal_ops = { + .registered = s5k6aa_registered, + .open = s5k6aa_open, +}; + +static const struct v4l2_subdev_core_ops s5k6aa_core_ops = { + .s_power = s5k6aa_set_power, + .log_status = s5k6aa_log_status, +}; + +static const struct v4l2_subdev_ops s5k6aa_subdev_ops = { + .core = &s5k6aa_core_ops, + .pad = &s5k6aa_pad_ops, + .video = &s5k6aa_video_ops, +}; + +/* + * GPIO setup + */ +static int s5k6aa_configure_gpio(int nr, int val, const char *name) +{ + unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + int ret; + + if (!gpio_is_valid(nr)) + return 0; + ret = gpio_request_one(nr, flags, name); + if (!ret) + gpio_export(nr, 0); + return ret; +} + +static void s5k6aa_free_gpios(struct s5k6aa *s5k6aa) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5k6aa->gpio); i++) { + if (!gpio_is_valid(s5k6aa->gpio[i].gpio)) + continue; + gpio_free(s5k6aa->gpio[i].gpio); + s5k6aa->gpio[i].gpio = -EINVAL; + } +} + +static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa, + const struct s5k6aa_platform_data *pdata) +{ + const struct s5k6aa_gpio *gpio = &pdata->gpio_stby; + int ret; + + s5k6aa->gpio[STBY].gpio = -EINVAL; + s5k6aa->gpio[RST].gpio = -EINVAL; + + ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_STBY"); + if (ret) { + s5k6aa_free_gpios(s5k6aa); + return ret; + } + s5k6aa->gpio[STBY] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + gpio = &pdata->gpio_reset; + ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_RST"); + if (ret) { + s5k6aa_free_gpios(s5k6aa); + return ret; + } + s5k6aa->gpio[RST] = *gpio; + if (gpio_is_valid(gpio->gpio)) + gpio_set_value(gpio->gpio, 0); + + return 0; +} + +static int s5k6aa_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct s5k6aa_platform_data *pdata = client->dev.platform_data; + struct v4l2_subdev *sd; + struct s5k6aa *s5k6aa; + int i, ret; + + if (pdata == NULL) { + dev_err(&client->dev, "Platform data not specified\n"); + return -EINVAL; + } + + if (pdata->mclk_frequency == 0) { + dev_err(&client->dev, "MCLK frequency not specified\n"); + return -EINVAL; + } + + s5k6aa = devm_kzalloc(&client->dev, sizeof(*s5k6aa), GFP_KERNEL); + if (!s5k6aa) + return -ENOMEM; + + mutex_init(&s5k6aa->lock); + + s5k6aa->mclk_frequency = pdata->mclk_frequency; + s5k6aa->bus_type = pdata->bus_type; + s5k6aa->mipi_lanes = pdata->nlanes; + s5k6aa->s_power = pdata->set_power; + s5k6aa->inv_hflip = pdata->horiz_flip; + s5k6aa->inv_vflip = pdata->vert_flip; + + sd = &s5k6aa->sd; + v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops); + strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name)); + + sd->internal_ops = &s5k6aa_subdev_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0); + if (ret) + return ret; + + ret = s5k6aa_configure_gpios(s5k6aa, pdata); + if (ret) + goto out_err2; + + for (i = 0; i < S5K6AA_NUM_SUPPLIES; i++) + s5k6aa->supplies[i].supply = s5k6aa_supply_names[i]; + + ret = regulator_bulk_get(&client->dev, S5K6AA_NUM_SUPPLIES, + s5k6aa->supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators\n"); + goto out_err3; + } + + ret = s5k6aa_initialize_ctrls(s5k6aa); + if (ret) + goto out_err4; + + s5k6aa_presets_data_init(s5k6aa); + + s5k6aa->ccd_rect.width = S5K6AA_WIN_WIDTH_MAX; + s5k6aa->ccd_rect.height = S5K6AA_WIN_HEIGHT_MAX; + s5k6aa->ccd_rect.left = 0; + s5k6aa->ccd_rect.top = 0; + + return 0; + +out_err4: + regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); +out_err3: + s5k6aa_free_gpios(s5k6aa); +out_err2: + media_entity_cleanup(&s5k6aa->sd.entity); + return ret; +} + +static int s5k6aa_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct s5k6aa *s5k6aa = to_s5k6aa(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + media_entity_cleanup(&sd->entity); + regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies); + s5k6aa_free_gpios(s5k6aa); + + return 0; +} + +static const struct i2c_device_id s5k6aa_id[] = { + { DRIVER_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, s5k6aa_id); + + +static struct i2c_driver s5k6aa_i2c_driver = { + .driver = { + .name = DRIVER_NAME + }, + .probe = s5k6aa_probe, + .remove = s5k6aa_remove, + .id_table = s5k6aa_id, +}; + +module_i2c_driver(s5k6aa_i2c_driver); + +MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/saa6588.c b/drivers/media/i2c/saa6588.c new file mode 100644 index 000000000000..0caac50d7cf4 --- /dev/null +++ b/drivers/media/i2c/saa6588.c @@ -0,0 +1,542 @@ +/* + Driver for SAA6588 RDS decoder + + (c) 2005 Hans J. Koch + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/types.h> +#include <linux/videodev2.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/poll.h> +#include <linux/wait.h> +#include <asm/uaccess.h> + +#include <media/saa6588.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + + +/* insmod options */ +static unsigned int debug; +static unsigned int xtal; +static unsigned int mmbs; +static unsigned int plvl; +static unsigned int bufblocks = 100; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); +module_param(xtal, int, 0); +MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0"); +module_param(mmbs, int, 0); +MODULE_PARM_DESC(mmbs, "enable MMBS mode: 0=off (default), 1=on"); +module_param(plvl, int, 0); +MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0"); +module_param(bufblocks, int, 0); +MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100"); + +MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder"); +MODULE_AUTHOR("Hans J. Koch <koch@hjk-az.de>"); + +MODULE_LICENSE("GPL"); + +/* ---------------------------------------------------------------------- */ + +#define UNSET (-1U) +#define PREFIX "saa6588: " +#define dprintk if (debug) printk + +struct saa6588 { + struct v4l2_subdev sd; + struct delayed_work work; + spinlock_t lock; + unsigned char *buffer; + unsigned int buf_size; + unsigned int rd_index; + unsigned int wr_index; + unsigned int block_count; + unsigned char last_blocknum; + wait_queue_head_t read_queue; + int data_available_for_read; + u8 sync; +}; + +static inline struct saa6588 *to_saa6588(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa6588, sd); +} + +/* ---------------------------------------------------------------------- */ + +/* + * SAA6588 defines + */ + +/* Initialization and mode control byte (0w) */ + +/* bit 0+1 (DAC0/DAC1) */ +#define cModeStandard 0x00 +#define cModeFastPI 0x01 +#define cModeReducedRequest 0x02 +#define cModeInvalid 0x03 + +/* bit 2 (RBDS) */ +#define cProcessingModeRDS 0x00 +#define cProcessingModeRBDS 0x04 + +/* bit 3+4 (SYM0/SYM1) */ +#define cErrCorrectionNone 0x00 +#define cErrCorrection2Bits 0x08 +#define cErrCorrection5Bits 0x10 +#define cErrCorrectionNoneRBDS 0x18 + +/* bit 5 (NWSY) */ +#define cSyncNormal 0x00 +#define cSyncRestart 0x20 + +/* bit 6 (TSQD) */ +#define cSigQualityDetectOFF 0x00 +#define cSigQualityDetectON 0x40 + +/* bit 7 (SQCM) */ +#define cSigQualityTriggered 0x00 +#define cSigQualityContinous 0x80 + +/* Pause level and flywheel control byte (1w) */ + +/* bits 0..5 (FEB0..FEB5) */ +#define cFlywheelMaxBlocksMask 0x3F +#define cFlywheelDefault 0x20 + +/* bits 6+7 (PL0/PL1) */ +#define cPauseLevel_11mV 0x00 +#define cPauseLevel_17mV 0x40 +#define cPauseLevel_27mV 0x80 +#define cPauseLevel_43mV 0xC0 + +/* Pause time/oscillator frequency/quality detector control byte (1w) */ + +/* bits 0..4 (SQS0..SQS4) */ +#define cQualityDetectSensMask 0x1F +#define cQualityDetectDefault 0x0F + +/* bit 5 (SOSC) */ +#define cSelectOscFreqOFF 0x00 +#define cSelectOscFreqON 0x20 + +/* bit 6+7 (PTF0/PTF1) */ +#define cOscFreq_4332kHz 0x00 +#define cOscFreq_8664kHz 0x40 +#define cOscFreq_12996kHz 0x80 +#define cOscFreq_17328kHz 0xC0 + +/* ---------------------------------------------------------------------- */ + +static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf) +{ + int i; + + if (s->rd_index == s->wr_index) { + if (debug > 2) + dprintk(PREFIX "Read: buffer empty.\n"); + return 0; + } + + if (debug > 2) { + dprintk(PREFIX "Read: "); + for (i = s->rd_index; i < s->rd_index + 3; i++) + dprintk("0x%02x ", s->buffer[i]); + } + + if (copy_to_user(user_buf, &s->buffer[s->rd_index], 3)) + return -EFAULT; + + s->rd_index += 3; + if (s->rd_index >= s->buf_size) + s->rd_index = 0; + s->block_count--; + + if (debug > 2) + dprintk("%d blocks total.\n", s->block_count); + + return 1; +} + +static void read_from_buf(struct saa6588 *s, struct saa6588_command *a) +{ + unsigned long flags; + + unsigned char __user *buf_ptr = a->buffer; + unsigned int i; + unsigned int rd_blocks; + + a->result = 0; + if (!a->buffer) + return; + + while (!s->data_available_for_read) { + int ret = wait_event_interruptible(s->read_queue, + s->data_available_for_read); + if (ret == -ERESTARTSYS) { + a->result = -EINTR; + return; + } + } + + spin_lock_irqsave(&s->lock, flags); + rd_blocks = a->block_count; + if (rd_blocks > s->block_count) + rd_blocks = s->block_count; + + if (!rd_blocks) { + spin_unlock_irqrestore(&s->lock, flags); + return; + } + + for (i = 0; i < rd_blocks; i++) { + if (block_to_user_buf(s, buf_ptr)) { + buf_ptr += 3; + a->result++; + } else + break; + } + a->result *= 3; + s->data_available_for_read = (s->block_count > 0); + spin_unlock_irqrestore(&s->lock, flags); +} + +static void block_to_buf(struct saa6588 *s, unsigned char *blockbuf) +{ + unsigned int i; + + if (debug > 3) + dprintk(PREFIX "New block: "); + + for (i = 0; i < 3; ++i) { + if (debug > 3) + dprintk("0x%02x ", blockbuf[i]); + s->buffer[s->wr_index] = blockbuf[i]; + s->wr_index++; + } + + if (s->wr_index >= s->buf_size) + s->wr_index = 0; + + if (s->wr_index == s->rd_index) { + s->rd_index += 3; + if (s->rd_index >= s->buf_size) + s->rd_index = 0; + } else + s->block_count++; + + if (debug > 3) + dprintk("%d blocks total.\n", s->block_count); +} + +static void saa6588_i2c_poll(struct saa6588 *s) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s->sd); + unsigned long flags; + unsigned char tmpbuf[6]; + unsigned char blocknum; + unsigned char tmp; + + /* Although we only need 3 bytes, we have to read at least 6. + SAA6588 returns garbage otherwise. */ + if (6 != i2c_master_recv(client, &tmpbuf[0], 6)) { + if (debug > 1) + dprintk(PREFIX "read error!\n"); + return; + } + + s->sync = tmpbuf[0] & 0x10; + if (!s->sync) + return; + blocknum = tmpbuf[0] >> 5; + if (blocknum == s->last_blocknum) { + if (debug > 3) + dprintk("Saw block %d again.\n", blocknum); + return; + } + + s->last_blocknum = blocknum; + + /* + Byte order according to v4l2 specification: + + Byte 0: Least Significant Byte of RDS Block + Byte 1: Most Significant Byte of RDS Block + Byte 2 Bit 7: Error bit. Indicates that an uncorrectable error + occurred during reception of this block. + Bit 6: Corrected bit. Indicates that an error was + corrected for this data block. + Bits 5-3: Same as bits 0-2. + Bits 2-0: Block number. + + SAA6588 byte order is Status-MSB-LSB, so we have to swap the + first and the last of the 3 bytes block. + */ + + tmp = tmpbuf[2]; + tmpbuf[2] = tmpbuf[0]; + tmpbuf[0] = tmp; + + /* Map 'Invalid block E' to 'Invalid Block' */ + if (blocknum == 6) + blocknum = V4L2_RDS_BLOCK_INVALID; + /* And if are not in mmbs mode, then 'Block E' is also mapped + to 'Invalid Block'. As far as I can tell MMBS is discontinued, + and if there is ever a need to support E blocks, then please + contact the linux-media mailinglist. */ + else if (!mmbs && blocknum == 5) + blocknum = V4L2_RDS_BLOCK_INVALID; + tmp = blocknum; + tmp |= blocknum << 3; /* Received offset == Offset Name (OK ?) */ + if ((tmpbuf[2] & 0x03) == 0x03) + tmp |= V4L2_RDS_BLOCK_ERROR; /* uncorrectable error */ + else if ((tmpbuf[2] & 0x03) != 0x00) + tmp |= V4L2_RDS_BLOCK_CORRECTED; /* corrected error */ + tmpbuf[2] = tmp; /* Is this enough ? Should we also check other bits ? */ + + spin_lock_irqsave(&s->lock, flags); + block_to_buf(s, tmpbuf); + spin_unlock_irqrestore(&s->lock, flags); + s->data_available_for_read = 1; + wake_up_interruptible(&s->read_queue); +} + +static void saa6588_work(struct work_struct *work) +{ + struct saa6588 *s = container_of(work, struct saa6588, work.work); + + saa6588_i2c_poll(s); + schedule_delayed_work(&s->work, msecs_to_jiffies(20)); +} + +static void saa6588_configure(struct saa6588 *s) +{ + struct i2c_client *client = v4l2_get_subdevdata(&s->sd); + unsigned char buf[3]; + int rc; + + buf[0] = cSyncRestart; + if (mmbs) + buf[0] |= cProcessingModeRBDS; + + buf[1] = cFlywheelDefault; + switch (plvl) { + case 0: + buf[1] |= cPauseLevel_11mV; + break; + case 1: + buf[1] |= cPauseLevel_17mV; + break; + case 2: + buf[1] |= cPauseLevel_27mV; + break; + case 3: + buf[1] |= cPauseLevel_43mV; + break; + default: /* nothing */ + break; + } + + buf[2] = cQualityDetectDefault | cSelectOscFreqON; + + switch (xtal) { + case 0: + buf[2] |= cOscFreq_4332kHz; + break; + case 1: + buf[2] |= cOscFreq_8664kHz; + break; + case 2: + buf[2] |= cOscFreq_12996kHz; + break; + case 3: + buf[2] |= cOscFreq_17328kHz; + break; + default: /* nothing */ + break; + } + + dprintk(PREFIX "writing: 0w=0x%02x 1w=0x%02x 2w=0x%02x\n", + buf[0], buf[1], buf[2]); + + rc = i2c_master_send(client, buf, 3); + if (rc != 3) + printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc); +} + +/* ---------------------------------------------------------------------- */ + +static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct saa6588 *s = to_saa6588(sd); + struct saa6588_command *a = arg; + + switch (cmd) { + /* --- open() for /dev/radio --- */ + case SAA6588_CMD_OPEN: + a->result = 0; /* return error if chip doesn't work ??? */ + break; + /* --- close() for /dev/radio --- */ + case SAA6588_CMD_CLOSE: + s->data_available_for_read = 1; + wake_up_interruptible(&s->read_queue); + a->result = 0; + break; + /* --- read() for /dev/radio --- */ + case SAA6588_CMD_READ: + read_from_buf(s, a); + break; + /* --- poll() for /dev/radio --- */ + case SAA6588_CMD_POLL: + a->result = 0; + if (s->data_available_for_read) { + a->result |= POLLIN | POLLRDNORM; + } + poll_wait(a->instance, &s->read_queue, a->event_list); + break; + + default: + /* nothing */ + return -ENOIOCTLCMD; + } + return 0; +} + +static int saa6588_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa6588 *s = to_saa6588(sd); + + vt->capability |= V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO; + if (s->sync) + vt->rxsubchans |= V4L2_TUNER_SUB_RDS; + return 0; +} + +static int saa6588_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa6588 *s = to_saa6588(sd); + + saa6588_configure(s); + return 0; +} + +static int saa6588_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA6588, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa6588_core_ops = { + .g_chip_ident = saa6588_g_chip_ident, + .ioctl = saa6588_ioctl, +}; + +static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = { + .g_tuner = saa6588_g_tuner, + .s_tuner = saa6588_s_tuner, +}; + +static const struct v4l2_subdev_ops saa6588_ops = { + .core = &saa6588_core_ops, + .tuner = &saa6588_tuner_ops, +}; + +/* ---------------------------------------------------------------------- */ + +static int saa6588_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa6588 *s; + struct v4l2_subdev *sd; + + v4l_info(client, "saa6588 found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (s == NULL) + return -ENOMEM; + + s->buf_size = bufblocks * 3; + + s->buffer = kmalloc(s->buf_size, GFP_KERNEL); + if (s->buffer == NULL) { + kfree(s); + return -ENOMEM; + } + sd = &s->sd; + v4l2_i2c_subdev_init(sd, client, &saa6588_ops); + spin_lock_init(&s->lock); + s->block_count = 0; + s->wr_index = 0; + s->rd_index = 0; + s->last_blocknum = 0xff; + init_waitqueue_head(&s->read_queue); + s->data_available_for_read = 0; + + saa6588_configure(s); + + /* start polling via eventd */ + INIT_DELAYED_WORK(&s->work, saa6588_work); + schedule_delayed_work(&s->work, 0); + return 0; +} + +static int saa6588_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa6588 *s = to_saa6588(sd); + + v4l2_device_unregister_subdev(sd); + + cancel_delayed_work_sync(&s->work); + + kfree(s->buffer); + kfree(s); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa6588_id[] = { + { "saa6588", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa6588_id); + +static struct i2c_driver saa6588_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa6588", + }, + .probe = saa6588_probe, + .remove = saa6588_remove, + .id_table = saa6588_id, +}; + +module_i2c_driver(saa6588_driver); diff --git a/drivers/media/i2c/saa7110.c b/drivers/media/i2c/saa7110.c new file mode 100644 index 000000000000..51cd4c8f0520 --- /dev/null +++ b/drivers/media/i2c/saa7110.c @@ -0,0 +1,494 @@ +/* + * saa7110 - Philips SAA7110(A) video decoder driver + * + * Copyright (C) 1998 Pauline Middelink <middelin@polyware.nl> + * + * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net> + * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> + * - some corrections for Pinnacle Systems Inc. DC10plus card. + * + * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> + * - moved over to linux>=2.4.x i2c protocol (1/1/2003) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("Philips SAA7110 video decoder driver"); +MODULE_AUTHOR("Pauline Middelink"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ +#define SAA7110_MAX_OUTPUT 1 /* 1 YUV */ + +#define SAA7110_NR_REG 0x35 + +struct saa7110 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + u8 reg[SAA7110_NR_REG]; + + v4l2_std_id norm; + int input; + int enable; + + wait_queue_head_t wq; +}; + +static inline struct saa7110 *to_saa7110(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7110, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa7110, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ +/* I2C support functions */ +/* ----------------------------------------------------------------------- */ + +static int saa7110_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7110 *decoder = to_saa7110(sd); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int saa7110_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7110 *decoder = to_saa7110(sd); + int ret = -1; + u8 reg = *data; /* first register to write to */ + + /* Sanity check */ + if (reg + (len - 1) > SAA7110_NR_REG) + return ret; + + /* the saa7110 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + ret = i2c_master_send(client, data, len); + + /* Cache the written data */ + memcpy(decoder->reg + reg, data + 1, len - 1); + } else { + for (++data, --len; len; len--) { + ret = saa7110_write(sd, reg++, *data++); + if (ret < 0) + break; + } + } + + return ret; +} + +static inline int saa7110_read(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte(client); +} + +/* ----------------------------------------------------------------------- */ +/* SAA7110 functions */ +/* ----------------------------------------------------------------------- */ + +#define FRESP_06H_COMPST 0x03 /*0x13*/ +#define FRESP_06H_SVIDEO 0x83 /*0xC0*/ + + +static int saa7110_selmux(struct v4l2_subdev *sd, int chan) +{ + static const unsigned char modes[9][8] = { + /* mode 0 */ + {FRESP_06H_COMPST, 0xD9, 0x17, 0x40, 0x03, + 0x44, 0x75, 0x16}, + /* mode 1 */ + {FRESP_06H_COMPST, 0xD8, 0x17, 0x40, 0x03, + 0x44, 0x75, 0x16}, + /* mode 2 */ + {FRESP_06H_COMPST, 0xBA, 0x07, 0x91, 0x03, + 0x60, 0xB5, 0x05}, + /* mode 3 */ + {FRESP_06H_COMPST, 0xB8, 0x07, 0x91, 0x03, + 0x60, 0xB5, 0x05}, + /* mode 4 */ + {FRESP_06H_COMPST, 0x7C, 0x07, 0xD2, 0x83, + 0x60, 0xB5, 0x03}, + /* mode 5 */ + {FRESP_06H_COMPST, 0x78, 0x07, 0xD2, 0x83, + 0x60, 0xB5, 0x03}, + /* mode 6 */ + {FRESP_06H_SVIDEO, 0x59, 0x17, 0x42, 0xA3, + 0x44, 0x75, 0x12}, + /* mode 7 */ + {FRESP_06H_SVIDEO, 0x9A, 0x17, 0xB1, 0x13, + 0x60, 0xB5, 0x14}, + /* mode 8 */ + {FRESP_06H_SVIDEO, 0x3C, 0x27, 0xC1, 0x23, + 0x44, 0x75, 0x21} + }; + struct saa7110 *decoder = to_saa7110(sd); + const unsigned char *ptr = modes[chan]; + + saa7110_write(sd, 0x06, ptr[0]); /* Luminance control */ + saa7110_write(sd, 0x20, ptr[1]); /* Analog Control #1 */ + saa7110_write(sd, 0x21, ptr[2]); /* Analog Control #2 */ + saa7110_write(sd, 0x22, ptr[3]); /* Mixer Control #1 */ + saa7110_write(sd, 0x2C, ptr[4]); /* Mixer Control #2 */ + saa7110_write(sd, 0x30, ptr[5]); /* ADCs gain control */ + saa7110_write(sd, 0x31, ptr[6]); /* Mixer Control #3 */ + saa7110_write(sd, 0x21, ptr[7]); /* Analog Control #2 */ + decoder->input = chan; + + return 0; +} + +static const unsigned char initseq[1 + SAA7110_NR_REG] = { + 0, 0x4C, 0x3C, 0x0D, 0xEF, 0xBD, 0xF2, 0x03, 0x00, + /* 0x08 */ 0xF8, 0xF8, 0x60, 0x60, 0x00, 0x86, 0x18, 0x90, + /* 0x10 */ 0x00, 0x59, 0x40, 0x46, 0x42, 0x1A, 0xFF, 0xDA, + /* 0x18 */ 0xF2, 0x8B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 0x20 */ 0xD9, 0x16, 0x40, 0x41, 0x80, 0x41, 0x80, 0x4F, + /* 0x28 */ 0xFE, 0x01, 0xCF, 0x0F, 0x03, 0x01, 0x03, 0x0C, + /* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02 +}; + +static v4l2_std_id determine_norm(struct v4l2_subdev *sd) +{ + DEFINE_WAIT(wait); + struct saa7110 *decoder = to_saa7110(sd); + int status; + + /* mode changed, start automatic detection */ + saa7110_write_block(sd, initseq, sizeof(initseq)); + saa7110_selmux(sd, decoder->input); + prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE); + schedule_timeout(msecs_to_jiffies(250)); + finish_wait(&decoder->wq, &wait); + status = saa7110_read(sd); + if (status & 0x40) { + v4l2_dbg(1, debug, sd, "status=0x%02x (no signal)\n", status); + return decoder->norm; /* no change*/ + } + if ((status & 3) == 0) { + saa7110_write(sd, 0x06, 0x83); + if (status & 0x20) { + v4l2_dbg(1, debug, sd, "status=0x%02x (NTSC/no color)\n", status); + /*saa7110_write(sd,0x2E,0x81);*/ + return V4L2_STD_NTSC; + } + v4l2_dbg(1, debug, sd, "status=0x%02x (PAL/no color)\n", status); + /*saa7110_write(sd,0x2E,0x9A);*/ + return V4L2_STD_PAL; + } + /*saa7110_write(sd,0x06,0x03);*/ + if (status & 0x20) { /* 60Hz */ + v4l2_dbg(1, debug, sd, "status=0x%02x (NTSC)\n", status); + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x50); + saa7110_write(sd, 0x11, 0x2C); + /*saa7110_write(sd,0x2E,0x81);*/ + return V4L2_STD_NTSC; + } + + /* 50Hz -> PAL/SECAM */ + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd,0x2E,0x9A);*/ + + prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE); + schedule_timeout(msecs_to_jiffies(250)); + finish_wait(&decoder->wq, &wait); + + status = saa7110_read(sd); + if ((status & 0x03) == 0x01) { + v4l2_dbg(1, debug, sd, "status=0x%02x (SECAM)\n", status); + saa7110_write(sd, 0x0D, 0x87); + return V4L2_STD_SECAM; + } + v4l2_dbg(1, debug, sd, "status=0x%02x (PAL)\n", status); + return V4L2_STD_PAL; +} + +static int saa7110_g_input_status(struct v4l2_subdev *sd, u32 *pstatus) +{ + struct saa7110 *decoder = to_saa7110(sd); + int res = V4L2_IN_ST_NO_SIGNAL; + int status = saa7110_read(sd); + + v4l2_dbg(1, debug, sd, "status=0x%02x norm=%llx\n", + status, (unsigned long long)decoder->norm); + if (!(status & 0x40)) + res = 0; + if (!(status & 0x03)) + res |= V4L2_IN_ST_NO_COLOR; + + *pstatus = res; + return 0; +} + +static int saa7110_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + *(v4l2_std_id *)std = determine_norm(sd); + return 0; +} + +static int saa7110_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7110 *decoder = to_saa7110(sd); + + if (decoder->norm != std) { + decoder->norm = std; + /*saa7110_write(sd, 0x06, 0x03);*/ + if (std & V4L2_STD_NTSC) { + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x50); + saa7110_write(sd, 0x11, 0x2C); + /*saa7110_write(sd, 0x2E, 0x81);*/ + v4l2_dbg(1, debug, sd, "switched to NTSC\n"); + } else if (std & V4L2_STD_PAL) { + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd, 0x2E, 0x9A);*/ + v4l2_dbg(1, debug, sd, "switched to PAL\n"); + } else if (std & V4L2_STD_SECAM) { + saa7110_write(sd, 0x0D, 0x87); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd, 0x2E, 0x9A);*/ + v4l2_dbg(1, debug, sd, "switched to SECAM\n"); + } else { + return -EINVAL; + } + } + return 0; +} + +static int saa7110_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7110 *decoder = to_saa7110(sd); + + if (input >= SAA7110_MAX_INPUT) { + v4l2_dbg(1, debug, sd, "input=%d not available\n", input); + return -EINVAL; + } + if (decoder->input != input) { + saa7110_selmux(sd, input); + v4l2_dbg(1, debug, sd, "switched to input=%d\n", input); + } + return 0; +} + +static int saa7110_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa7110 *decoder = to_saa7110(sd); + + if (decoder->enable != enable) { + decoder->enable = enable; + saa7110_write(sd, 0x0E, enable ? 0x18 : 0x80); + v4l2_dbg(1, debug, sd, "YUV %s\n", enable ? "on" : "off"); + } + return 0; +} + +static int saa7110_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + saa7110_write(sd, 0x19, ctrl->val); + break; + case V4L2_CID_CONTRAST: + saa7110_write(sd, 0x13, ctrl->val); + break; + case V4L2_CID_SATURATION: + saa7110_write(sd, 0x12, ctrl->val); + break; + case V4L2_CID_HUE: + saa7110_write(sd, 0x07, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +static int saa7110_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7110, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops saa7110_ctrl_ops = { + .s_ctrl = saa7110_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops saa7110_core_ops = { + .g_chip_ident = saa7110_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = saa7110_s_std, +}; + +static const struct v4l2_subdev_video_ops saa7110_video_ops = { + .s_routing = saa7110_s_routing, + .s_stream = saa7110_s_stream, + .querystd = saa7110_querystd, + .g_input_status = saa7110_g_input_status, +}; + +static const struct v4l2_subdev_ops saa7110_ops = { + .core = &saa7110_core_ops, + .video = &saa7110_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7110_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa7110 *decoder; + struct v4l2_subdev *sd; + int rv; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa7110_ops); + decoder->norm = V4L2_STD_PAL; + decoder->input = 0; + decoder->enable = 1; + v4l2_ctrl_handler_init(&decoder->hdl, 2); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + + init_waitqueue_head(&decoder->wq); + + rv = saa7110_write_block(sd, initseq, sizeof(initseq)); + if (rv < 0) { + v4l2_dbg(1, debug, sd, "init status %d\n", rv); + } else { + int ver, status; + saa7110_write(sd, 0x21, 0x10); + saa7110_write(sd, 0x0e, 0x18); + saa7110_write(sd, 0x0D, 0x04); + ver = saa7110_read(sd); + saa7110_write(sd, 0x0D, 0x06); + /*mdelay(150);*/ + status = saa7110_read(sd); + v4l2_dbg(1, debug, sd, "version %x, status=0x%02x\n", + ver, status); + saa7110_write(sd, 0x0D, 0x86); + saa7110_write(sd, 0x0F, 0x10); + saa7110_write(sd, 0x11, 0x59); + /*saa7110_write(sd, 0x2E, 0x9A);*/ + } + + /*saa7110_selmux(sd,0);*/ + /*determine_norm(sd);*/ + /* setup and implicit mode 0 select has been performed */ + + return 0; +} + +static int saa7110_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa7110 *decoder = to_saa7110(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa7110_id[] = { + { "saa7110", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7110_id); + +static struct i2c_driver saa7110_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7110", + }, + .probe = saa7110_probe, + .remove = saa7110_remove, + .id_table = saa7110_id, +}; + +module_i2c_driver(saa7110_driver); diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c new file mode 100644 index 000000000000..2107336cd836 --- /dev/null +++ b/drivers/media/i2c/saa7115.c @@ -0,0 +1,1727 @@ +/* saa711x - Philips SAA711x video decoder driver + * This driver can work with saa7111, saa7111a, saa7113, saa7114, + * saa7115 and saa7118. + * + * Based on saa7114 driver by Maxim Yevtyushkin, which is based on + * the saa7111 driver by Dave Perks. + * + * Copyright (C) 1998 Dave Perks <dperks@ibm.net> + * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> + * + * Slight changes for video timing and attachment output by + * Wolfgang Scherr <scherr@net4you.net> + * + * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) + * by Ronald Bultje <rbultje@ronald.bitfreak.net> + * + * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com> + * (2/17/2003) + * + * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl> + * + * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> + * SAA7111, SAA7113 and SAA7118 support + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include "saa711x_regs.h" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-chip-ident.h> +#include <media/saa7115.h> +#include <asm/div64.h> + +#define VRES_60HZ (480+16) + +MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); +MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " + "Hans Verkuil, Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +struct saa711x_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + + struct { + /* chroma gain control cluster */ + struct v4l2_ctrl *agc; + struct v4l2_ctrl *gain; + }; + + v4l2_std_id std; + int input; + int output; + int enable; + int radio; + int width; + int height; + u32 ident; + u32 audclk_freq; + u32 crystal_freq; + u8 ucgc; + u8 cgcdiv; + u8 apll; +}; + +static inline struct saa711x_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa711x_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* Sanity routine to check if a register is present */ +static int saa711x_has_reg(const int id, const u8 reg) +{ + if (id == V4L2_IDENT_SAA7111) + return reg < 0x20 && reg != 0x01 && reg != 0x0f && + (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; + if (id == V4L2_IDENT_SAA7111A) + return reg < 0x20 && reg != 0x01 && reg != 0x0f && + reg != 0x14 && reg != 0x18 && reg != 0x19 && + reg != 0x1d && reg != 0x1e; + + /* common for saa7113/4/5/8 */ + if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || + reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || + reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || + reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) + return 0; + + switch (id) { + case V4L2_IDENT_SAA7113: + return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && + reg != 0x5d && reg < 0x63; + case V4L2_IDENT_SAA7114: + return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && + (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && + reg != 0x81 && reg < 0xf0; + case V4L2_IDENT_SAA7115: + return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); + case V4L2_IDENT_SAA7118: + return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && + (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && + (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; + } + return 1; +} + +static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs) +{ + struct saa711x_state *state = to_state(sd); + unsigned char reg, data; + + while (*regs != 0x00) { + reg = *(regs++); + data = *(regs++); + + /* According with datasheets, reserved regs should be + filled with 0 - seems better not to touch on they */ + if (saa711x_has_reg(state->ident, reg)) { + if (saa711x_write(sd, reg, data) < 0) + return -1; + } else { + v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg); + } + } + return 0; +} + +static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +/* SAA7111 initialization table */ +static const unsigned char saa7111_init[] = { + R_01_INC_DELAY, 0x00, /* reserved */ + + /*front end */ + R_02_INPUT_CNTL_1, 0xd0, /* FUSE=3, GUDL=2, MODE=0 */ + R_03_INPUT_CNTL_2, 0x23, /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, + * GAFIX=0, GAI1=256, GAI2=256 */ + R_04_INPUT_CNTL_3, 0x00, /* GAI1=256 */ + R_05_INPUT_CNTL_4, 0x00, /* GAI2=256 */ + + /* decoder */ + R_06_H_SYNC_START, 0xf3, /* HSB at 13(50Hz) / 17(60Hz) + * pixels after end of last line */ + R_07_H_SYNC_STOP, 0xe8, /* HSS seems to be needed to + * work with NTSC, too */ + R_08_SYNC_CNTL, 0xc8, /* AUFD=1, FSEL=1, EXFIL=0, + * VTRC=1, HPLL=0, VNOI=0 */ + R_09_LUMA_CNTL, 0x01, /* BYPS=0, PREF=0, BPSS=0, + * VBLB=0, UPTCV=0, APER=1 */ + R_0A_LUMA_BRIGHT_CNTL, 0x80, + R_0B_LUMA_CONTRAST_CNTL, 0x47, /* 0b - CONT=1.109 */ + R_0C_CHROMA_SAT_CNTL, 0x40, + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0E_CHROMA_CNTL_1, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, + * FCTC=0, CHBW=1 */ + R_0F_CHROMA_GAIN_CNTL, 0x00, /* reserved */ + R_10_CHROMA_CNTL_2, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ + R_11_MODE_DELAY_CNTL, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, + * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ + R_12_RT_SIGNAL_CNTL, 0x00, /* 12 - output control 2 */ + R_13_RT_X_PORT_OUT_CNTL, 0x00, /* 13 - output control 3 */ + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_15_VGATE_START_FID_CHG, 0x00, + R_16_VGATE_STOP, 0x00, + R_17_MISC_VGATE_CONF_AND_MSB, 0x00, + + 0x00, 0x00 +}; + +/* SAA7113 init codes */ +static const unsigned char saa7113_init[] = { + R_01_INC_DELAY, 0x08, + R_02_INPUT_CNTL_1, 0xc2, + R_03_INPUT_CNTL_2, 0x30, + R_04_INPUT_CNTL_3, 0x00, + R_05_INPUT_CNTL_4, 0x00, + R_06_H_SYNC_START, 0x89, + R_07_H_SYNC_STOP, 0x0d, + R_08_SYNC_CNTL, 0x88, + R_09_LUMA_CNTL, 0x01, + R_0A_LUMA_BRIGHT_CNTL, 0x80, + R_0B_LUMA_CONTRAST_CNTL, 0x47, + R_0C_CHROMA_SAT_CNTL, 0x40, + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0E_CHROMA_CNTL_1, 0x01, + R_0F_CHROMA_GAIN_CNTL, 0x2a, + R_10_CHROMA_CNTL_2, 0x08, + R_11_MODE_DELAY_CNTL, 0x0c, + R_12_RT_SIGNAL_CNTL, 0x07, + R_13_RT_X_PORT_OUT_CNTL, 0x00, + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_15_VGATE_START_FID_CHG, 0x00, + R_16_VGATE_STOP, 0x00, + R_17_MISC_VGATE_CONF_AND_MSB, 0x00, + + 0x00, 0x00 +}; + +/* If a value differs from the Hauppauge driver values, then the comment starts with + 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the + Hauppauge driver sets. */ + +/* SAA7114 and SAA7115 initialization table */ +static const unsigned char saa7115_init_auto_input[] = { + /* Front-End Part */ + R_01_INC_DELAY, 0x48, /* white peak control disabled */ + R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */ + R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */ + R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */ + /* Decoder Part */ + R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */ + R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */ + R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ + R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ + R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ + R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */ + R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */ + R_11_MODE_DELAY_CNTL, 0x00, + R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */ + R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */ + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */ + R_19_RAW_DATA_OFF_CNTL, 0x80, + R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */ + R_1B_MISC_TVVCRDET, 0x42, /* recommended value */ + R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ + R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ + + + R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ + + /* Power Device Control */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ + 0x00, 0x00 +}; + +/* Used to reset saa7113, saa7114 and saa7115 */ +static const unsigned char saa7115_cfg_reset_scaler[] = { + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */ + 0x00, 0x00 +}; + +/* ============== SAA7715 VIDEO templates ============= */ + +static const unsigned char saa7115_cfg_60hz_video[] = { + R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + + R_15_VGATE_START_FID_CHG, 0x03, + R_16_VGATE_STOP, 0x11, + R_17_MISC_VGATE_CONF_AND_MSB, 0x9c, + + R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ + R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ + + R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ + + /* Task A */ + R_90_A_TASK_HANDLING_CNTL, 0x80, + R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, + R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, + R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, + + /* hoffset low (input), 0x0002 is minimum */ + R_94_A_HORIZ_INPUT_WINDOW_START, 0x01, + R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* hsize low (input), 0x02d0 = 720 */ + R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + R_98_A_VERT_INPUT_WINDOW_START, 0x05, + R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, + + R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c, + R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, + + R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, + R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, + + R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c, + R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, + + /* Task B */ + R_C0_B_TASK_HANDLING_CNTL, 0x00, + R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, + R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, + R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, + + /* 0x0002 is minimum */ + R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02, + R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* 0x02d0 = 720 */ + R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + /* vwindow start 0x12 = 18 */ + R_C8_B_VERT_INPUT_WINDOW_START, 0x12, + R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, + + /* vwindow length 0xf8 = 248 */ + R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1, + R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9, + + /* hwindow 0x02d0 = 720 */ + R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, + R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, + + R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ + R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */ + R_F5_PULSGEN_LINE_LENGTH, 0xad, + R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, + + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_50hz_video[] = { + R_80_GLOBAL_CNTL_1, 0x00, + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + + R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */ + R_16_VGATE_STOP, 0x16, + R_17_MISC_VGATE_CONF_AND_MSB, 0x99, + + R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ + R_0E_CHROMA_CNTL_1, 0x07, + + R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ + + /* Task A */ + R_90_A_TASK_HANDLING_CNTL, 0x81, + R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, + R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, + R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, + + /* This is weird: the datasheet says that you should use 2 as the minimum value, */ + /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ + /* hoffset low (input), 0x0002 is minimum */ + R_94_A_HORIZ_INPUT_WINDOW_START, 0x00, + R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* hsize low (input), 0x02d0 = 720 */ + R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + R_98_A_VERT_INPUT_WINDOW_START, 0x03, + R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, + + /* vsize 0x12 = 18 */ + R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12, + R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, + + /* hsize 0x05a0 = 1440 */ + R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, + R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */ + R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */ + R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */ + + /* Task B */ + R_C0_B_TASK_HANDLING_CNTL, 0x00, + R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, + R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, + R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, + + /* This is weird: the datasheet says that you should use 2 as the minimum value, */ + /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ + /* hoffset low (input), 0x0002 is minimum. See comment above. */ + R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00, + R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, + + /* hsize 0x02d0 = 720 */ + R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, + R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, + + /* voffset 0x16 = 22 */ + R_C8_B_VERT_INPUT_WINDOW_START, 0x16, + R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, + + /* vsize 0x0120 = 288 */ + R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20, + R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01, + + /* hsize 0x02d0 = 720 */ + R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, + R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, + + R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ + R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ + R_F5_PULSGEN_LINE_LENGTH, 0xb0, + R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, + + 0x00, 0x00 +}; + +/* ============== SAA7715 VIDEO templates (end) ======= */ + +static const unsigned char saa7115_cfg_vbi_on[] = { + R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ + + 0x00, 0x00 +}; + +static const unsigned char saa7115_cfg_vbi_off[] = { + R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ + R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ + + 0x00, 0x00 +}; + + +static const unsigned char saa7115_init_misc[] = { + R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, + R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, + R_84_I_PORT_SIGNAL_DEF, 0x20, + R_85_I_PORT_SIGNAL_POLAR, 0x21, + R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5, + R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, + + /* Task A */ + R_A0_A_HORIZ_PRESCALING, 0x01, + R_A1_A_ACCUMULATION_LENGTH, 0x00, + R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, + + /* Configure controls at nominal value*/ + R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80, + R_A5_A_LUMA_CONTRAST_CNTL, 0x40, + R_A6_A_CHROMA_SATURATION_CNTL, 0x40, + + /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ + R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00, + R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02, + + R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00, + + /* must be horiz lum scaling / 2 */ + R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00, + R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01, + + /* must be offset luma / 2 */ + R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00, + + R_B0_A_VERT_LUMA_SCALING_INC, 0x00, + R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04, + + R_B2_A_VERT_CHROMA_SCALING_INC, 0x00, + R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04, + + R_B4_A_VERT_SCALING_MODE_CNTL, 0x01, + + R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00, + R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00, + R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00, + R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00, + + R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00, + R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00, + R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00, + R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00, + + /* Task B */ + R_D0_B_HORIZ_PRESCALING, 0x01, + R_D1_B_ACCUMULATION_LENGTH, 0x00, + R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, + + /* Configure controls at nominal value*/ + R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80, + R_D5_B_LUMA_CONTRAST_CNTL, 0x40, + R_D6_B_CHROMA_SATURATION_CNTL, 0x40, + + /* hor lum scaling 0x0400 = 1 */ + R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, + R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04, + + R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00, + + /* must be hor lum scaling / 2 */ + R_DC_B_HORIZ_CHROMA_SCALING, 0x00, + R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02, + + /* must be offset luma / 2 */ + R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00, + + R_E0_B_VERT_LUMA_SCALING_INC, 0x00, + R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04, + + R_E2_B_VERT_CHROMA_SCALING_INC, 0x00, + R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04, + + R_E4_B_VERT_SCALING_MODE_CNTL, 0x01, + + R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00, + R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00, + R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00, + R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00, + + R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00, + R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00, + R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00, + R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00, + + R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ + R_F3_PLL_INCREMENT, 0x46, + R_F4_PLL2_STATUS, 0x00, + R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */ + R_F8_PULSE_B_POS, 0x00, + R_F9_PULSE_B_POS_MSB, 0x4b, + R_FA_PULSE_C_POS, 0x00, + R_FB_PULSE_C_POS_MSB, 0x4b, + + /* PLL2 lock detection settings: 71 lines 50% phase error */ + R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88, + + /* Turn off VBI */ + R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */ + R_41_LCR_BASE, 0xff, + R_41_LCR_BASE+1, 0xff, + R_41_LCR_BASE+2, 0xff, + R_41_LCR_BASE+3, 0xff, + R_41_LCR_BASE+4, 0xff, + R_41_LCR_BASE+5, 0xff, + R_41_LCR_BASE+6, 0xff, + R_41_LCR_BASE+7, 0xff, + R_41_LCR_BASE+8, 0xff, + R_41_LCR_BASE+9, 0xff, + R_41_LCR_BASE+10, 0xff, + R_41_LCR_BASE+11, 0xff, + R_41_LCR_BASE+12, 0xff, + R_41_LCR_BASE+13, 0xff, + R_41_LCR_BASE+14, 0xff, + R_41_LCR_BASE+15, 0xff, + R_41_LCR_BASE+16, 0xff, + R_41_LCR_BASE+17, 0xff, + R_41_LCR_BASE+18, 0xff, + R_41_LCR_BASE+19, 0xff, + R_41_LCR_BASE+20, 0xff, + R_41_LCR_BASE+21, 0xff, + R_41_LCR_BASE+22, 0xff, + R_58_PROGRAM_FRAMING_CODE, 0x40, + R_59_H_OFF_FOR_SLICER, 0x47, + R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83, + R_5D_DID, 0xbd, + R_5E_SDID, 0x35, + + R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */ + + R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */ + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, + R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, + 0x00, 0x00 +}; + +static int saa711x_odd_parity(u8 c) +{ + c ^= (c >> 4); + c ^= (c >> 2); + c ^= (c >> 1); + + return c & 1; +} + +static int saa711x_decode_vps(u8 *dst, u8 *p) +{ + static const u8 biphase_tbl[] = { + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, + 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, + 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, + 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, + 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, + 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, + 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, + 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, + 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, + 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, + 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, + 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, + 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, + 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, + 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, + 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, + }; + int i; + u8 c, err = 0; + + for (i = 0; i < 2 * 13; i += 2) { + err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; + c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); + dst[i / 2] = c; + } + return err & 0xf0; +} + +static int saa711x_decode_wss(u8 *p) +{ + static const int wss_bits[8] = { + 0, 0, 0, 1, 0, 1, 1, 1 + }; + unsigned char parity; + int wss = 0; + int i; + + for (i = 0; i < 16; i++) { + int b1 = wss_bits[p[i] & 7]; + int b2 = wss_bits[(p[i] >> 3) & 7]; + + if (b1 == b2) + return -1; + wss |= b2 << i; + } + parity = wss & 15; + parity ^= parity >> 2; + parity ^= parity >> 1; + + if (!(parity & 1)) + return -1; + + return wss; +} + +static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct saa711x_state *state = to_state(sd); + u32 acpf; + u32 acni; + u32 hz; + u64 f; + u8 acc = 0; /* reg 0x3a, audio clock control */ + + /* Checks for chips that don't have audio clock (saa7111, saa7113) */ + if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD)) + return 0; + + v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq); + + /* sanity check */ + if (freq < 32000 || freq > 48000) + return -EINVAL; + + /* hz is the refresh rate times 100 */ + hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000; + /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */ + acpf = (25600 * freq) / hz; + /* acni = (256 * freq * 2^23) / crystal_frequency = + (freq * 2^(8+23)) / crystal_frequency = + (freq << 31) / crystal_frequency */ + f = freq; + f = f << 31; + do_div(f, state->crystal_freq); + acni = f; + if (state->ucgc) { + acpf = acpf * state->cgcdiv / 16; + acni = acni * state->cgcdiv / 16; + acc = 0x80; + if (state->cgcdiv == 3) + acc |= 0x40; + } + if (state->apll) + acc |= 0x08; + + saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03); + saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10); + saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc); + + saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff); + saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1, + (acpf >> 8) & 0xff); + saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2, + (acpf >> 16) & 0x03); + + saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff); + saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff); + saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f); + state->audclk_freq = freq; + return 0; +} + +static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct saa711x_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_CHROMA_AGC: + /* chroma gain cluster */ + if (state->agc->val) + state->gain->val = + saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f; + break; + } + return 0; +} + +static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct saa711x_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val); + break; + + case V4L2_CID_SATURATION: + saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val); + break; + + case V4L2_CID_HUE: + saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val); + break; + + case V4L2_CID_CHROMA_AGC: + /* chroma gain cluster */ + if (state->agc->val) + saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val); + else + saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height) +{ + struct saa711x_state *state = to_state(sd); + int HPSC, HFSC; + int VSCY; + int res; + int is_50hz = state->std & V4L2_STD_625_50; + int Vsrc = is_50hz ? 576 : 480; + + v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height); + + /* FIXME need better bounds checking here */ + if ((width < 1) || (width > 1440)) + return -EINVAL; + if ((height < 1) || (height > Vsrc)) + return -EINVAL; + + if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) { + /* Decoder only supports 720 columns and 480 or 576 lines */ + if (width != 720) + return -EINVAL; + if (height != Vsrc) + return -EINVAL; + } + + state->width = width; + state->height = height; + + if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) + return 0; + + /* probably have a valid size, let's set it */ + /* Set output width/height */ + /* width */ + + saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, + (u8) (width & 0xff)); + saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, + (u8) ((width >> 8) & 0xff)); + + /* Vertical Scaling uses height/2 */ + res = height / 2; + + /* On 60Hz, it is using a higher Vertical Output Size */ + if (!is_50hz) + res += (VRES_60HZ - 480) >> 1; + + /* height */ + saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, + (u8) (res & 0xff)); + saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, + (u8) ((res >> 8) & 0xff)); + + /* Scaling settings */ + /* Hprescaler is floor(inres/outres) */ + HPSC = (int)(720 / width); + /* 0 is not allowed (div. by zero) */ + HPSC = HPSC ? HPSC : 1; + HFSC = (int)((1024 * 720) / (HPSC * width)); + /* FIXME hardcodes to "Task B" + * write H prescaler integer */ + saa711x_write(sd, R_D0_B_HORIZ_PRESCALING, + (u8) (HPSC & 0x3f)); + + v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); + /* write H fine-scaling (luminance) */ + saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC, + (u8) (HFSC & 0xff)); + saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, + (u8) ((HFSC >> 8) & 0xff)); + /* write H fine-scaling (chrominance) + * must be lum/2, so i'll just bitshift :) */ + saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING, + (u8) ((HFSC >> 1) & 0xff)); + saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB, + (u8) ((HFSC >> 9) & 0xff)); + + VSCY = (int)((1024 * Vsrc) / height); + v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); + + /* Correct Contrast and Luminance */ + saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL, + (u8) (64 * 1024 / VSCY)); + saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL, + (u8) (64 * 1024 / VSCY)); + + /* write V fine-scaling (luminance) */ + saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC, + (u8) (VSCY & 0xff)); + saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB, + (u8) ((VSCY >> 8) & 0xff)); + /* write V fine-scaling (chrominance) */ + saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC, + (u8) (VSCY & 0xff)); + saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, + (u8) ((VSCY >> 8) & 0xff)); + + saa711x_writeregs(sd, saa7115_cfg_reset_scaler); + + /* Activates task "B" */ + saa711x_write(sd, R_80_GLOBAL_CNTL_1, + saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20); + + return 0; +} + +static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa711x_state *state = to_state(sd); + + /* Prevent unnecessary standard changes. During a standard + change the I-Port is temporarily disabled. Any devices + reading from that port can get confused. + Note that s_std is also used to switch from + radio to TV mode, so if a s_std is broadcast to + all I2C devices then you do not want to have an unwanted + side-effect here. */ + if (std == state->std) + return; + + state->std = std; + + // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. + if (std & V4L2_STD_525_60) { + v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); + saa711x_writeregs(sd, saa7115_cfg_60hz_video); + saa711x_set_size(sd, 720, 480); + } else { + v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); + saa711x_writeregs(sd, saa7115_cfg_50hz_video); + saa711x_set_size(sd, 720, 576); + } + + /* Register 0E - Bits D6-D4 on NO-AUTO mode + (SAA7111 and SAA7113 doesn't have auto mode) + 50 Hz / 625 lines 60 Hz / 525 lines + 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) + 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) + 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) + 011 NTSC N (3.58MHz) PAL M (3.58MHz) + 100 reserved NTSC-Japan (3.58MHz) + */ + if (state->ident <= V4L2_IDENT_SAA7113) { + u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; + + if (std == V4L2_STD_PAL_M) { + reg |= 0x30; + } else if (std == V4L2_STD_PAL_Nc) { + reg |= 0x20; + } else if (std == V4L2_STD_PAL_60) { + reg |= 0x10; + } else if (std == V4L2_STD_NTSC_M_JP) { + reg |= 0x40; + } else if (std & V4L2_STD_SECAM) { + reg |= 0x50; + } + saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg); + } else { + /* restart task B if needed */ + int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10; + + if (taskb && state->ident == V4L2_IDENT_SAA7114) { + saa711x_writeregs(sd, saa7115_cfg_vbi_on); + } + + /* switch audio mode too! */ + saa711x_s_clock_freq(sd, state->audclk_freq); + } +} + +/* setup the sliced VBI lcr registers according to the sliced VBI format */ +static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) +{ + struct saa711x_state *state = to_state(sd); + int is_50hz = (state->std & V4L2_STD_625_50); + u8 lcr[24]; + int i, x; + +#if 1 + /* saa7113/7114/7118 VBI support are experimental */ + if (!saa711x_has_reg(state->ident, R_41_LCR_BASE)) + return; + +#else + /* SAA7113 and SAA7118 also should support VBI - Need testing */ + if (state->ident != V4L2_IDENT_SAA7115) + return; +#endif + + for (i = 0; i <= 23; i++) + lcr[i] = 0xff; + + if (fmt == NULL) { + /* raw VBI */ + if (is_50hz) + for (i = 6; i <= 23; i++) + lcr[i] = 0xdd; + else + for (i = 10; i <= 21; i++) + lcr[i] = 0xdd; + } else { + /* sliced VBI */ + /* first clear lines that cannot be captured */ + if (is_50hz) { + for (i = 0; i <= 5; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + } + else { + for (i = 0; i <= 9; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + for (i = 22; i <= 23; i++) + fmt->service_lines[0][i] = + fmt->service_lines[1][i] = 0; + } + + /* Now set the lcr values according to the specified service */ + for (i = 6; i <= 23; i++) { + lcr[i] = 0; + for (x = 0; x <= 1; x++) { + switch (fmt->service_lines[1-x][i]) { + case 0: + lcr[i] |= 0xf << (4 * x); + break; + case V4L2_SLICED_TELETEXT_B: + lcr[i] |= 1 << (4 * x); + break; + case V4L2_SLICED_CAPTION_525: + lcr[i] |= 4 << (4 * x); + break; + case V4L2_SLICED_WSS_625: + lcr[i] |= 5 << (4 * x); + break; + case V4L2_SLICED_VPS: + lcr[i] |= 7 << (4 * x); + break; + } + } + } + } + + /* write the lcr registers */ + for (i = 2; i <= 23; i++) { + saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]); + } + + /* enable/disable raw VBI capturing */ + saa711x_writeregs(sd, fmt == NULL ? + saa7115_cfg_vbi_on : + saa7115_cfg_vbi_off); +} + +static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced) +{ + static u16 lcr2vbi[] = { + 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_CAPTION_525, /* 4 */ + V4L2_SLICED_WSS_625, 0, /* 5 */ + V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ + 0, 0, 0, 0 + }; + int i; + + memset(sliced, 0, sizeof(*sliced)); + /* done if using raw VBI */ + if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10) + return 0; + for (i = 2; i <= 23; i++) { + u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE); + + sliced->service_lines[0][i] = lcr2vbi[v >> 4]; + sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; + sliced->service_set |= + sliced->service_lines[0][i] | sliced->service_lines[1][i]; + } + return 0; +} + +static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + saa711x_set_lcr(sd, NULL); + return 0; +} + +static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) +{ + saa711x_set_lcr(sd, fmt); + return 0; +} + +static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + return saa711x_set_size(sd, fmt->width, fmt->height); +} + +/* Decode the sliced VBI data stream as created by the saa7115. + The format is described in the saa7115 datasheet in Tables 25 and 26 + and in Figure 33. + The current implementation uses SAV/EAV codes and not the ancillary data + headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV + code. */ +static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) +{ + struct saa711x_state *state = to_state(sd); + static const char vbi_no_data_pattern[] = { + 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 + }; + u8 *p = vbi->p; + u32 wss; + int id1, id2; /* the ID1 and ID2 bytes from the internal header */ + + vbi->type = 0; /* mark result as a failure */ + id1 = p[2]; + id2 = p[3]; + /* Note: the field bit is inverted for 60 Hz video */ + if (state->std & V4L2_STD_525_60) + id1 ^= 0x40; + + /* Skip internal header, p now points to the start of the payload */ + p += 4; + vbi->p = p; + + /* calculate field and line number of the VBI packet (1-23) */ + vbi->is_second_field = ((id1 & 0x40) != 0); + vbi->line = (id1 & 0x3f) << 3; + vbi->line |= (id2 & 0x70) >> 4; + + /* Obtain data type */ + id2 &= 0xf; + + /* If the VBI slicer does not detect any signal it will fill up + the payload buffer with 0xa0 bytes. */ + if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) + return 0; + + /* decode payloads */ + switch (id2) { + case 1: + vbi->type = V4L2_SLICED_TELETEXT_B; + break; + case 4: + if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) + return 0; + vbi->type = V4L2_SLICED_CAPTION_525; + break; + case 5: + wss = saa711x_decode_wss(p); + if (wss == -1) + return 0; + p[0] = wss & 0xff; + p[1] = wss >> 8; + vbi->type = V4L2_SLICED_WSS_625; + break; + case 7: + if (saa711x_decode_vps(p, p) != 0) + return 0; + vbi->type = V4L2_SLICED_VPS; + break; + default: + break; + } + return 0; +} + +/* ============ SAA7115 AUDIO settings (end) ============= */ + +static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa711x_state *state = to_state(sd); + int status; + + if (state->radio) + return 0; + status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + + v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status); + vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; + return 0; +} + +static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa711x_state *state = to_state(sd); + + state->radio = 0; + saa711x_set_v4lstd(sd, std); + return 0; +} + +static int saa711x_s_radio(struct v4l2_subdev *sd) +{ + struct saa711x_state *state = to_state(sd); + + state->radio = 1; + return 0; +} + +static int saa711x_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa711x_state *state = to_state(sd); + u8 mask = (state->ident <= V4L2_IDENT_SAA7111A) ? 0xf8 : 0xf0; + + v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n", + input, output); + + /* saa7111/3 does not have these inputs */ + if (state->ident <= V4L2_IDENT_SAA7113 && + (input == SAA7115_COMPOSITE4 || + input == SAA7115_COMPOSITE5)) { + return -EINVAL; + } + if (input > SAA7115_SVIDEO3) + return -EINVAL; + if (state->input == input && state->output == output) + return 0; + v4l2_dbg(1, debug, sd, "now setting %s input %s output\n", + (input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", + (output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); + state->input = input; + + /* saa7111 has slightly different input numbering */ + if (state->ident <= V4L2_IDENT_SAA7111A) { + if (input >= SAA7115_COMPOSITE4) + input -= 2; + /* saa7111 specific */ + saa711x_write(sd, R_10_CHROMA_CNTL_2, + (saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) | + ((output & 0xc0) ^ 0x40)); + saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, + (saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | + ((output & 2) ? 0x0a : 0)); + } + + /* select mode */ + saa711x_write(sd, R_02_INPUT_CNTL_1, + (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) | + input); + + /* bypass chrominance trap for S-Video modes */ + saa711x_write(sd, R_09_LUMA_CNTL, + (saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) | + (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); + + state->output = output; + if (state->ident == V4L2_IDENT_SAA7114 || + state->ident == V4L2_IDENT_SAA7115) { + saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, + (saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | + (state->output & 0x01)); + } + return 0; +} + +static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val) +{ + struct saa711x_state *state = to_state(sd); + + if (state->ident > V4L2_IDENT_SAA7111A) + return -EINVAL; + saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) | + (val ? 0x80 : 0)); + return 0; +} + +static int saa711x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa711x_state *state = to_state(sd); + + v4l2_dbg(1, debug, sd, "%s output\n", + enable ? "enable" : "disable"); + + if (state->enable == enable) + return 0; + state->enable = enable; + if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED)) + return 0; + saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable); + return 0; +} + +static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags) +{ + struct saa711x_state *state = to_state(sd); + + if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ) + return -EINVAL; + state->crystal_freq = freq; + state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4; + state->ucgc = (flags & SAA7115_FREQ_FL_UCGC) ? 1 : 0; + state->apll = (flags & SAA7115_FREQ_FL_APLL) ? 1 : 0; + saa711x_s_clock_freq(sd, state->audclk_freq); + return 0; +} + +static int saa711x_reset(struct v4l2_subdev *sd, u32 val) +{ + v4l2_dbg(1, debug, sd, "decoder RESET\n"); + saa711x_writeregs(sd, saa7115_cfg_reset_scaler); + return 0; +} + +static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data) +{ + /* Note: the internal field ID is inverted for NTSC, + so data->field 0 maps to the saa7115 even field, + whereas for PAL it maps to the saa7115 odd field. */ + switch (data->id) { + case V4L2_SLICED_WSS_625: + if (saa711x_read(sd, 0x6b) & 0xc0) + return -EIO; + data->data[0] = saa711x_read(sd, 0x6c); + data->data[1] = saa711x_read(sd, 0x6d); + return 0; + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) { + /* CC */ + if (saa711x_read(sd, 0x66) & 0x30) + return -EIO; + data->data[0] = saa711x_read(sd, 0x69); + data->data[1] = saa711x_read(sd, 0x6a); + return 0; + } + /* XDS */ + if (saa711x_read(sd, 0x66) & 0xc0) + return -EIO; + data->data[0] = saa711x_read(sd, 0x67); + data->data[1] = saa711x_read(sd, 0x68); + return 0; + default: + return -EINVAL; + } +} + +static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct saa711x_state *state = to_state(sd); + int reg1f, reg1e; + + /* + * The V4L2 core already initializes std with all supported + * Standards. All driver needs to do is to mask it, to remove + * standards that don't apply from the mask + */ + + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f); + + /* horizontal/vertical not locked */ + if (reg1f & 0x40) + goto ret; + + if (reg1f & 0x20) + *std &= V4L2_STD_525_60; + else + *std &= V4L2_STD_625_50; + + if (state->ident != V4L2_IDENT_SAA7115) + goto ret; + + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + + switch (reg1e & 0x03) { + case 1: + *std &= V4L2_STD_NTSC; + break; + case 2: + /* + * V4L2_STD_PAL just cover the european PAL standards. + * This is wrong, as the device could also be using an + * other PAL standard. + */ + *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | + V4L2_STD_PAL_M | V4L2_STD_PAL_60; + break; + case 3: + *std &= V4L2_STD_SECAM; + break; + default: + /* Can't detect anything */ + break; + } + + v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); + +ret: + v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std); + + return 0; +} + +static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct saa711x_state *state = to_state(sd); + int reg1e = 0x80; + int reg1f; + + *status = V4L2_IN_ST_NO_SIGNAL; + if (state->ident == V4L2_IDENT_SAA7115) + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80) + *status = 0; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa711x_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int saa711x_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int saa711x_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct saa711x_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0); +} + +static int saa711x_log_status(struct v4l2_subdev *sd) +{ + struct saa711x_state *state = to_state(sd); + int reg1e, reg1f; + int signalOk; + int vcr; + + v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq); + if (state->ident != V4L2_IDENT_SAA7115) { + /* status for the saa7114 */ + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + signalOk = (reg1f & 0xc1) == 0x81; + v4l2_info(sd, "Video signal: %s\n", signalOk ? "ok" : "bad"); + v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); + return 0; + } + + /* status for the saa7115 */ + reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); + reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); + + signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; + vcr = !(reg1f & 0x10); + + if (state->input >= 6) + v4l2_info(sd, "Input: S-Video %d\n", state->input - 6); + else + v4l2_info(sd, "Input: Composite %d\n", state->input); + v4l2_info(sd, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); + v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); + + switch (reg1e & 0x03) { + case 1: + v4l2_info(sd, "Detected format: NTSC\n"); + break; + case 2: + v4l2_info(sd, "Detected format: PAL\n"); + break; + case 3: + v4l2_info(sd, "Detected format: SECAM\n"); + break; + default: + v4l2_info(sd, "Detected format: BW/No color\n"); + break; + } + v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops saa711x_ctrl_ops = { + .s_ctrl = saa711x_s_ctrl, + .g_volatile_ctrl = saa711x_g_volatile_ctrl, +}; + +static const struct v4l2_subdev_core_ops saa711x_core_ops = { + .log_status = saa711x_log_status, + .g_chip_ident = saa711x_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = saa711x_s_std, + .reset = saa711x_reset, + .s_gpio = saa711x_s_gpio, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = saa711x_g_register, + .s_register = saa711x_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = { + .s_radio = saa711x_s_radio, + .g_tuner = saa711x_g_tuner, +}; + +static const struct v4l2_subdev_audio_ops saa711x_audio_ops = { + .s_clock_freq = saa711x_s_clock_freq, +}; + +static const struct v4l2_subdev_video_ops saa711x_video_ops = { + .s_routing = saa711x_s_routing, + .s_crystal_freq = saa711x_s_crystal_freq, + .s_mbus_fmt = saa711x_s_mbus_fmt, + .s_stream = saa711x_s_stream, + .querystd = saa711x_querystd, + .g_input_status = saa711x_g_input_status, +}; + +static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = { + .g_vbi_data = saa711x_g_vbi_data, + .decode_vbi_line = saa711x_decode_vbi_line, + .g_sliced_fmt = saa711x_g_sliced_fmt, + .s_sliced_fmt = saa711x_s_sliced_fmt, + .s_raw_fmt = saa711x_s_raw_fmt, +}; + +static const struct v4l2_subdev_ops saa711x_ops = { + .core = &saa711x_core_ops, + .tuner = &saa711x_tuner_ops, + .audio = &saa711x_audio_ops, + .video = &saa711x_video_ops, + .vbi = &saa711x_vbi_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int saa711x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa711x_state *state; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + int i; + char name[17]; + char chip_id; + int autodetect = !id || id->driver_data == 1; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + for (i = 0; i < 0x0f; i++) { + i2c_smbus_write_byte_data(client, 0, i); + name[i] = (i2c_smbus_read_byte_data(client, 0) & 0x0f) + '0'; + if (name[i] > '9') + name[i] += 'a' - '9' - 1; + } + name[i] = '\0'; + + chip_id = name[5]; + + /* Check whether this chip is part of the saa711x series */ + if (memcmp(name + 1, "f711", 4)) { + v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", + client->addr << 1, name); + return -ENODEV; + } + + /* Safety check */ + if (!autodetect && id->name[6] != chip_id) { + v4l_warn(client, "found saa711%c while %s was expected\n", + chip_id, id->name); + } + snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); + v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name, + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &saa711x_ops); + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 6); + /* add in ascending ID order */ + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_CHROMA_AGC, 0, 1, 1, 1); + state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, + V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(state); + return err; + } + v4l2_ctrl_auto_cluster(2, &state->agc, 0, true); + + state->input = -1; + state->output = SAA7115_IPORT_ON; + state->enable = 1; + state->radio = 0; + switch (chip_id) { + case '1': + state->ident = V4L2_IDENT_SAA7111; + if (saa711x_read(sd, R_00_CHIP_VERSION) & 0xf0) { + v4l_info(client, "saa7111a variant found\n"); + state->ident = V4L2_IDENT_SAA7111A; + } + break; + case '3': + state->ident = V4L2_IDENT_SAA7113; + break; + case '4': + state->ident = V4L2_IDENT_SAA7114; + break; + case '5': + state->ident = V4L2_IDENT_SAA7115; + break; + case '8': + state->ident = V4L2_IDENT_SAA7118; + break; + default: + state->ident = V4L2_IDENT_SAA7111; + v4l2_info(sd, "WARNING: Chip is not known - Falling back to saa7111\n"); + break; + } + + state->audclk_freq = 48000; + + v4l2_dbg(1, debug, sd, "writing init values\n"); + + /* init to 60hz/48khz */ + state->crystal_freq = SAA7115_FREQ_24_576_MHZ; + switch (state->ident) { + case V4L2_IDENT_SAA7111: + case V4L2_IDENT_SAA7111A: + saa711x_writeregs(sd, saa7111_init); + break; + case V4L2_IDENT_SAA7113: + saa711x_writeregs(sd, saa7113_init); + break; + default: + state->crystal_freq = SAA7115_FREQ_32_11_MHZ; + saa711x_writeregs(sd, saa7115_init_auto_input); + } + if (state->ident > V4L2_IDENT_SAA7111A) + saa711x_writeregs(sd, saa7115_init_misc); + saa711x_set_v4lstd(sd, V4L2_STD_NTSC); + v4l2_ctrl_handler_setup(hdl); + + v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n", + saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC), + saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa711x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id saa711x_id[] = { + { "saa7115_auto", 1 }, /* autodetect */ + { "saa7111", 0 }, + { "saa7113", 0 }, + { "saa7114", 0 }, + { "saa7115", 0 }, + { "saa7118", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa711x_id); + +static struct i2c_driver saa711x_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7115", + }, + .probe = saa711x_probe, + .remove = saa711x_remove, + .id_table = saa711x_id, +}; + +module_i2c_driver(saa711x_driver); diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h new file mode 100644 index 000000000000..4e5f2eb0a2c1 --- /dev/null +++ b/drivers/media/i2c/saa711x_regs.h @@ -0,0 +1,549 @@ +/* saa711x - Philips SAA711x video decoder register specifications + * + * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define R_00_CHIP_VERSION 0x00 +/* Video Decoder */ + /* Video Decoder - Frontend part */ +#define R_01_INC_DELAY 0x01 +#define R_02_INPUT_CNTL_1 0x02 +#define R_03_INPUT_CNTL_2 0x03 +#define R_04_INPUT_CNTL_3 0x04 +#define R_05_INPUT_CNTL_4 0x05 + /* Video Decoder - Decoder part */ +#define R_06_H_SYNC_START 0x06 +#define R_07_H_SYNC_STOP 0x07 +#define R_08_SYNC_CNTL 0x08 +#define R_09_LUMA_CNTL 0x09 +#define R_0A_LUMA_BRIGHT_CNTL 0x0a +#define R_0B_LUMA_CONTRAST_CNTL 0x0b +#define R_0C_CHROMA_SAT_CNTL 0x0c +#define R_0D_CHROMA_HUE_CNTL 0x0d +#define R_0E_CHROMA_CNTL_1 0x0e +#define R_0F_CHROMA_GAIN_CNTL 0x0f +#define R_10_CHROMA_CNTL_2 0x10 +#define R_11_MODE_DELAY_CNTL 0x11 +#define R_12_RT_SIGNAL_CNTL 0x12 +#define R_13_RT_X_PORT_OUT_CNTL 0x13 +#define R_14_ANAL_ADC_COMPAT_CNTL 0x14 +#define R_15_VGATE_START_FID_CHG 0x15 +#define R_16_VGATE_STOP 0x16 +#define R_17_MISC_VGATE_CONF_AND_MSB 0x17 +#define R_18_RAW_DATA_GAIN_CNTL 0x18 +#define R_19_RAW_DATA_OFF_CNTL 0x19 +#define R_1A_COLOR_KILL_LVL_CNTL 0x1a +#define R_1B_MISC_TVVCRDET 0x1b +#define R_1C_ENHAN_COMB_CTRL1 0x1c +#define R_1D_ENHAN_COMB_CTRL2 0x1d +#define R_1E_STATUS_BYTE_1_VD_DEC 0x1e +#define R_1F_STATUS_BYTE_2_VD_DEC 0x1f + +/* Component processing and interrupt masking part */ +#define R_23_INPUT_CNTL_5 0x23 +#define R_24_INPUT_CNTL_6 0x24 +#define R_25_INPUT_CNTL_7 0x25 +#define R_29_COMP_DELAY 0x29 +#define R_2A_COMP_BRIGHT_CNTL 0x2a +#define R_2B_COMP_CONTRAST_CNTL 0x2b +#define R_2C_COMP_SAT_CNTL 0x2c +#define R_2D_INTERRUPT_MASK_1 0x2d +#define R_2E_INTERRUPT_MASK_2 0x2e +#define R_2F_INTERRUPT_MASK_3 0x2f + +/* Audio clock generator part */ +#define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30 +#define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34 +#define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38 +#define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39 +#define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a + +/* General purpose VBI data slicer part */ +#define R_40_SLICER_CNTL_1 0x40 +#define R_41_LCR_BASE 0x41 +#define R_58_PROGRAM_FRAMING_CODE 0x58 +#define R_59_H_OFF_FOR_SLICER 0x59 +#define R_5A_V_OFF_FOR_SLICER 0x5a +#define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b +#define R_5D_DID 0x5d +#define R_5E_SDID 0x5e +#define R_60_SLICER_STATUS_BYTE_0 0x60 +#define R_61_SLICER_STATUS_BYTE_1 0x61 +#define R_62_SLICER_STATUS_BYTE_2 0x62 + +/* X port, I port and the scaler part */ + /* Task independent global settings */ +#define R_80_GLOBAL_CNTL_1 0x80 +#define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81 +#define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83 +#define R_84_I_PORT_SIGNAL_DEF 0x84 +#define R_85_I_PORT_SIGNAL_POLAR 0x85 +#define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86 +#define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87 +#define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88 +#define R_8F_STATUS_INFO_SCALER 0x8f + /* Task A definition */ + /* Basic settings and acquisition window definition */ +#define R_90_A_TASK_HANDLING_CNTL 0x90 +#define R_91_A_X_PORT_FORMATS_AND_CONF 0x91 +#define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92 +#define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93 +#define R_94_A_HORIZ_INPUT_WINDOW_START 0x94 +#define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95 +#define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96 +#define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97 +#define R_98_A_VERT_INPUT_WINDOW_START 0x98 +#define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99 +#define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a +#define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b +#define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c +#define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d +#define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e +#define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f + /* FIR filtering and prescaling */ +#define R_A0_A_HORIZ_PRESCALING 0xa0 +#define R_A1_A_ACCUMULATION_LENGTH 0xa1 +#define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2 +#define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4 +#define R_A5_A_LUMA_CONTRAST_CNTL 0xa5 +#define R_A6_A_CHROMA_SATURATION_CNTL 0xa6 + /* Horizontal phase scaling */ +#define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8 +#define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9 +#define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa +#define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac +#define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad +#define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae +#define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf + /* Vertical scaling */ +#define R_B0_A_VERT_LUMA_SCALING_INC 0xb0 +#define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1 +#define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2 +#define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3 +#define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4 +#define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8 +#define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9 +#define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba +#define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb +#define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc +#define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd +#define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe +#define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf + /* Task B definition */ + /* Basic settings and acquisition window definition */ +#define R_C0_B_TASK_HANDLING_CNTL 0xc0 +#define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1 +#define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2 +#define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3 +#define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4 +#define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5 +#define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6 +#define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7 +#define R_C8_B_VERT_INPUT_WINDOW_START 0xc8 +#define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9 +#define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca +#define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb +#define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc +#define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd +#define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce +#define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf + /* FIR filtering and prescaling */ +#define R_D0_B_HORIZ_PRESCALING 0xd0 +#define R_D1_B_ACCUMULATION_LENGTH 0xd1 +#define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2 +#define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4 +#define R_D5_B_LUMA_CONTRAST_CNTL 0xd5 +#define R_D6_B_CHROMA_SATURATION_CNTL 0xd6 + /* Horizontal phase scaling */ +#define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8 +#define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9 +#define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda +#define R_DC_B_HORIZ_CHROMA_SCALING 0xdc +#define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd +#define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde + /* Vertical scaling */ +#define R_E0_B_VERT_LUMA_SCALING_INC 0xe0 +#define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1 +#define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2 +#define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3 +#define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4 +#define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8 +#define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9 +#define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea +#define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb +#define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec +#define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed +#define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee +#define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef + +/* second PLL (PLL2) and Pulsegenerator Programming */ +#define R_F0_LFCO_PER_LINE 0xf0 +#define R_F1_P_I_PARAM_SELECT 0xf1 +#define R_F2_NOMINAL_PLL2_DTO 0xf2 +#define R_F3_PLL_INCREMENT 0xf3 +#define R_F4_PLL2_STATUS 0xf4 +#define R_F5_PULSGEN_LINE_LENGTH 0xf5 +#define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6 +#define R_F7_PULSE_A_POS_MSB 0xf7 +#define R_F8_PULSE_B_POS 0xf8 +#define R_F9_PULSE_B_POS_MSB 0xf9 +#define R_FA_PULSE_C_POS 0xfa +#define R_FB_PULSE_C_POS_MSB 0xfb +#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff + +#if 0 +/* Those structs will be used in the future for debug purposes */ +struct saa711x_reg_descr { + u8 reg; + int count; + char *name; +}; + +struct saa711x_reg_descr saa711x_regs[] = { + /* REG COUNT NAME */ + {R_00_CHIP_VERSION,1, + "Chip version"}, + + /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */ + + /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */ + {R_01_INC_DELAY,1, + "Increment delay"}, + {R_02_INPUT_CNTL_1,1, + "Analog input control 1"}, + {R_03_INPUT_CNTL_2,1, + "Analog input control 2"}, + {R_04_INPUT_CNTL_3,1, + "Analog input control 3"}, + {R_05_INPUT_CNTL_4,1, + "Analog input control 4"}, + + /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */ + {R_06_H_SYNC_START,1, + "Horizontal sync start"}, + {R_07_H_SYNC_STOP,1, + "Horizontal sync stop"}, + {R_08_SYNC_CNTL,1, + "Sync control"}, + {R_09_LUMA_CNTL,1, + "Luminance control"}, + {R_0A_LUMA_BRIGHT_CNTL,1, + "Luminance brightness control"}, + {R_0B_LUMA_CONTRAST_CNTL,1, + "Luminance contrast control"}, + {R_0C_CHROMA_SAT_CNTL,1, + "Chrominance saturation control"}, + {R_0D_CHROMA_HUE_CNTL,1, + "Chrominance hue control"}, + {R_0E_CHROMA_CNTL_1,1, + "Chrominance control 1"}, + {R_0F_CHROMA_GAIN_CNTL,1, + "Chrominance gain control"}, + {R_10_CHROMA_CNTL_2,1, + "Chrominance control 2"}, + {R_11_MODE_DELAY_CNTL,1, + "Mode/delay control"}, + {R_12_RT_SIGNAL_CNTL,1, + "RT signal control"}, + {R_13_RT_X_PORT_OUT_CNTL,1, + "RT/X port output control"}, + {R_14_ANAL_ADC_COMPAT_CNTL,1, + "Analog/ADC/compatibility control"}, + {R_15_VGATE_START_FID_CHG, 1, + "VGATE start FID change"}, + {R_16_VGATE_STOP,1, + "VGATE stop"}, + {R_17_MISC_VGATE_CONF_AND_MSB, 1, + "Miscellaneous VGATE configuration and MSBs"}, + {R_18_RAW_DATA_GAIN_CNTL,1, + "Raw data gain control",}, + {R_19_RAW_DATA_OFF_CNTL,1, + "Raw data offset control",}, + {R_1A_COLOR_KILL_LVL_CNTL,1, + "Color Killer Level Control"}, + { R_1B_MISC_TVVCRDET, 1, + "MISC /TVVCRDET"}, + { R_1C_ENHAN_COMB_CTRL1, 1, + "Enhanced comb ctrl1"}, + { R_1D_ENHAN_COMB_CTRL2, 1, + "Enhanced comb ctrl1"}, + {R_1E_STATUS_BYTE_1_VD_DEC,1, + "Status byte 1 video decoder"}, + {R_1F_STATUS_BYTE_2_VD_DEC,1, + "Status byte 2 video decoder"}, + + /* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */ + /* 0x20 to 0x22 - Reserved */ + {R_23_INPUT_CNTL_5,1, + "Analog input control 5"}, + {R_24_INPUT_CNTL_6,1, + "Analog input control 6"}, + {R_25_INPUT_CNTL_7,1, + "Analog input control 7"}, + /* 0x26 to 0x28 - Reserved */ + {R_29_COMP_DELAY,1, + "Component delay"}, + {R_2A_COMP_BRIGHT_CNTL,1, + "Component brightness control"}, + {R_2B_COMP_CONTRAST_CNTL,1, + "Component contrast control"}, + {R_2C_COMP_SAT_CNTL,1, + "Component saturation control"}, + {R_2D_INTERRUPT_MASK_1,1, + "Interrupt mask 1"}, + {R_2E_INTERRUPT_MASK_2,1, + "Interrupt mask 2"}, + {R_2F_INTERRUPT_MASK_3,1, + "Interrupt mask 3"}, + + /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */ + {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3, + "Audio master clock cycles per field"}, + /* 0x33 - Reserved */ + {R_34_AUD_MAST_CLK_NOMINAL_INC,3, + "Audio master clock nominal increment"}, + /* 0x37 - Reserved */ + {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1, + "Clock ratio AMXCLK to ASCLK"}, + {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1, + "Clock ratio ASCLK to ALRCLK"}, + {R_3A_AUD_CLK_GEN_BASIC_SETUP,1, + "Audio clock generator basic setup"}, + /* 0x3b-0x3f - Reserved */ + + /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */ + {R_40_SLICER_CNTL_1,1, + "Slicer control 1"}, + {R_41_LCR,23, + "R_41_LCR"}, + {R_58_PROGRAM_FRAMING_CODE,1, + "Programmable framing code"}, + {R_59_H_OFF_FOR_SLICER,1, + "Horizontal offset for slicer"}, + {R_5A_V_OFF_FOR_SLICER,1, + "Vertical offset for slicer"}, + {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1, + "Field offset and MSBs for horizontal and vertical offset"}, + {R_5D_DID,1, + "Header and data identification (R_5D_DID)"}, + {R_5E_SDID,1, + "Sliced data identification (R_5E_SDID) code"}, + {R_60_SLICER_STATUS_BYTE_0,1, + "Slicer status byte 0"}, + {R_61_SLICER_STATUS_BYTE_1,1, + "Slicer status byte 1"}, + {R_62_SLICER_STATUS_BYTE_2,1, + "Slicer status byte 2"}, + /* 0x63-0x7f - Reserved */ + + /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ + /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */ + {R_80_GLOBAL_CNTL_1,1, + "Global control 1"}, + {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1, + "Vertical sync and Field ID source selection, retimed V and F signals"}, + /* 0x82 - Reserved */ + {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1, + "X port I/O enable and output clock"}, + {R_84_I_PORT_SIGNAL_DEF,1, + "I port signal definitions"}, + {R_85_I_PORT_SIGNAL_POLAR,1, + "I port signal polarities"}, + {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1, + "I port FIFO flag control and arbitration"}, + {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1, + "I port I/O enable output clock and gated"}, + {R_88_POWER_SAVE_ADC_PORT_CNTL,1, + "Power save/ADC port control"}, + /* 089-0x8e - Reserved */ + {R_8F_STATUS_INFO_SCALER,1, + "Status information scaler part"}, + + /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */ + /* Task A: Basic settings and acquisition window definition */ + {R_90_A_TASK_HANDLING_CNTL,1, + "Task A: Task handling control"}, + {R_91_A_X_PORT_FORMATS_AND_CONF,1, + "Task A: X port formats and configuration"}, + {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1, + "Task A: X port input reference signal definition"}, + {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1, + "Task A: I port output formats and configuration"}, + {R_94_A_HORIZ_INPUT_WINDOW_START,2, + "Task A: Horizontal input window start"}, + {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2, + "Task A: Horizontal input window length"}, + {R_98_A_VERT_INPUT_WINDOW_START,2, + "Task A: Vertical input window start"}, + {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2, + "Task A: Vertical input window length"}, + {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2, + "Task A: Horizontal output window length"}, + {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2, + "Task A: Vertical output window length"}, + + /* Task A: FIR filtering and prescaling */ + {R_A0_A_HORIZ_PRESCALING,1, + "Task A: Horizontal prescaling"}, + {R_A1_A_ACCUMULATION_LENGTH,1, + "Task A: Accumulation length"}, + {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, + "Task A: Prescaler DC gain and FIR prefilter"}, + /* 0xa3 - Reserved */ + {R_A4_A_LUMA_BRIGHTNESS_CNTL,1, + "Task A: Luminance brightness control"}, + {R_A5_A_LUMA_CONTRAST_CNTL,1, + "Task A: Luminance contrast control"}, + {R_A6_A_CHROMA_SATURATION_CNTL,1, + "Task A: Chrominance saturation control"}, + /* 0xa7 - Reserved */ + + /* Task A: Horizontal phase scaling */ + {R_A8_A_HORIZ_LUMA_SCALING_INC,2, + "Task A: Horizontal luminance scaling increment"}, + {R_AA_A_HORIZ_LUMA_PHASE_OFF,1, + "Task A: Horizontal luminance phase offset"}, + /* 0xab - Reserved */ + {R_AC_A_HORIZ_CHROMA_SCALING_INC,2, + "Task A: Horizontal chrominance scaling increment"}, + {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1, + "Task A: Horizontal chrominance phase offset"}, + /* 0xaf - Reserved */ + + /* Task A: Vertical scaling */ + {R_B0_A_VERT_LUMA_SCALING_INC,2, + "Task A: Vertical luminance scaling increment"}, + {R_B2_A_VERT_CHROMA_SCALING_INC,2, + "Task A: Vertical chrominance scaling increment"}, + {R_B4_A_VERT_SCALING_MODE_CNTL,1, + "Task A: Vertical scaling mode control"}, + /* 0xb5-0xb7 - Reserved */ + {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1, + "Task A: Vertical chrominance phase offset '00'"}, + {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1, + "Task A: Vertical chrominance phase offset '01'"}, + {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1, + "Task A: Vertical chrominance phase offset '10'"}, + {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1, + "Task A: Vertical chrominance phase offset '11'"}, + {R_BC_A_VERT_LUMA_PHASE_OFF_00,1, + "Task A: Vertical luminance phase offset '00'"}, + {R_BD_A_VERT_LUMA_PHASE_OFF_01,1, + "Task A: Vertical luminance phase offset '01'"}, + {R_BE_A_VERT_LUMA_PHASE_OFF_10,1, + "Task A: Vertical luminance phase offset '10'"}, + {R_BF_A_VERT_LUMA_PHASE_OFF_11,1, + "Task A: Vertical luminance phase offset '11'"}, + + /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */ + /* Task B: Basic settings and acquisition window definition */ + {R_C0_B_TASK_HANDLING_CNTL,1, + "Task B: Task handling control"}, + {R_C1_B_X_PORT_FORMATS_AND_CONF,1, + "Task B: X port formats and configuration"}, + {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1, + "Task B: Input reference signal definition"}, + {R_C3_B_I_PORT_FORMATS_AND_CONF,1, + "Task B: I port formats and configuration"}, + {R_C4_B_HORIZ_INPUT_WINDOW_START,2, + "Task B: Horizontal input window start"}, + {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2, + "Task B: Horizontal input window length"}, + {R_C8_B_VERT_INPUT_WINDOW_START,2, + "Task B: Vertical input window start"}, + {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2, + "Task B: Vertical input window length"}, + {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2, + "Task B: Horizontal output window length"}, + {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2, + "Task B: Vertical output window length"}, + + /* Task B: FIR filtering and prescaling */ + {R_D0_B_HORIZ_PRESCALING,1, + "Task B: Horizontal prescaling"}, + {R_D1_B_ACCUMULATION_LENGTH,1, + "Task B: Accumulation length"}, + {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1, + "Task B: Prescaler DC gain and FIR prefilter"}, + /* 0xd3 - Reserved */ + {R_D4_B_LUMA_BRIGHTNESS_CNTL,1, + "Task B: Luminance brightness control"}, + {R_D5_B_LUMA_CONTRAST_CNTL,1, + "Task B: Luminance contrast control"}, + {R_D6_B_CHROMA_SATURATION_CNTL,1, + "Task B: Chrominance saturation control"}, + /* 0xd7 - Reserved */ + + /* Task B: Horizontal phase scaling */ + {R_D8_B_HORIZ_LUMA_SCALING_INC,2, + "Task B: Horizontal luminance scaling increment"}, + {R_DA_B_HORIZ_LUMA_PHASE_OFF,1, + "Task B: Horizontal luminance phase offset"}, + /* 0xdb - Reserved */ + {R_DC_B_HORIZ_CHROMA_SCALING,2, + "Task B: Horizontal chrominance scaling"}, + {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1, + "Task B: Horizontal Phase Offset Chroma"}, + /* 0xdf - Reserved */ + + /* Task B: Vertical scaling */ + {R_E0_B_VERT_LUMA_SCALING_INC,2, + "Task B: Vertical luminance scaling increment"}, + {R_E2_B_VERT_CHROMA_SCALING_INC,2, + "Task B: Vertical chrominance scaling increment"}, + {R_E4_B_VERT_SCALING_MODE_CNTL,1, + "Task B: Vertical scaling mode control"}, + /* 0xe5-0xe7 - Reserved */ + {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1, + "Task B: Vertical chrominance phase offset '00'"}, + {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1, + "Task B: Vertical chrominance phase offset '01'"}, + {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1, + "Task B: Vertical chrominance phase offset '10'"}, + {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1, + "Task B: Vertical chrominance phase offset '11'"}, + {R_EC_B_VERT_LUMA_PHASE_OFF_00,1, + "Task B: Vertical luminance phase offset '00'"}, + {R_ED_B_VERT_LUMA_PHASE_OFF_01,1, + "Task B: Vertical luminance phase offset '01'"}, + {R_EE_B_VERT_LUMA_PHASE_OFF_10,1, + "Task B: Vertical luminance phase offset '10'"}, + {R_EF_B_VERT_LUMA_PHASE_OFF_11,1, + "Task B: Vertical luminance phase offset '11'"}, + + /* second PLL (PLL2) and Pulsegenerator Programming */ + { R_F0_LFCO_PER_LINE, 1, + "LFCO's per line"}, + { R_F1_P_I_PARAM_SELECT,1, + "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"}, + { R_F2_NOMINAL_PLL2_DTO,1, + "Nominal PLL2 DTO"}, + {R_F3_PLL_INCREMENT,1, + "PLL2 Increment"}, + {R_F4_PLL2_STATUS,1, + "PLL2 Status"}, + {R_F5_PULSGEN_LINE_LENGTH,1, + "Pulsgen. line length"}, + {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1, + "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"}, + {R_F7_PULSE_A_POS_MSB,1, + "Pulse A Position"}, + {R_F8_PULSE_B_POS,2, + "Pulse B Position"}, + {R_FA_PULSE_C_POS,2, + "Pulse C Position"}, + /* 0xfc to 0xfe - Reserved */ + {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1, + "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"}, +}; +#endif diff --git a/drivers/media/i2c/saa7127.c b/drivers/media/i2c/saa7127.c new file mode 100644 index 000000000000..8ecb6564a315 --- /dev/null +++ b/drivers/media/i2c/saa7127.c @@ -0,0 +1,852 @@ +/* + * saa7127 - Philips SAA7127/SAA7129 video encoder driver + * + * Copyright (C) 2003 Roy Bulter <rbulter@hetnet.nl> + * + * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter + * + * Copyright (C) 2000-2001 Gillem <htoa@gmx.net> + * Copyright (C) 2002 Andreas Oberritter <obi@saftware.de> + * + * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo + * + * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org> + * + * This driver is designed for the Hauppauge 250/350 Linux driver + * from the ivtv Project + * + * Copyright (C) 2003 Kevin Thayer <nufan_wfk@yahoo.com> + * + * Dual output support: + * Copyright (C) 2004 Eric Varsanyi + * + * NTSC Tuning and 7.5 IRE Setup + * Copyright (C) 2004 Chris Kennedy <c@groovy.org> + * + * VBI additions & cleanup: + * Copyright (C) 2004, 2005 Hans Verkuil <hverkuil@xs4all.nl> + * + * Note: the saa7126 is identical to the saa7127, and the saa7128 is + * identical to the saa7129, except that the saa7126 and saa7128 have + * macrovision anti-taping support. This driver will almost certainly + * work fine for those chips, except of course for the missing anti-taping + * support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/saa7127.h> + +static int debug; +static int test_image; + +MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver"); +MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_LICENSE("GPL"); +module_param(debug, int, 0644); +module_param(test_image, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); +MODULE_PARM_DESC(test_image, "test_image (0-1)"); + + +/* + * SAA7127 registers + */ + +#define SAA7127_REG_STATUS 0x00 +#define SAA7127_REG_WIDESCREEN_CONFIG 0x26 +#define SAA7127_REG_WIDESCREEN_ENABLE 0x27 +#define SAA7127_REG_BURST_START 0x28 +#define SAA7127_REG_BURST_END 0x29 +#define SAA7127_REG_COPYGEN_0 0x2a +#define SAA7127_REG_COPYGEN_1 0x2b +#define SAA7127_REG_COPYGEN_2 0x2c +#define SAA7127_REG_OUTPUT_PORT_CONTROL 0x2d +#define SAA7127_REG_GAIN_LUMINANCE_RGB 0x38 +#define SAA7127_REG_GAIN_COLORDIFF_RGB 0x39 +#define SAA7127_REG_INPUT_PORT_CONTROL_1 0x3a +#define SAA7129_REG_FADE_KEY_COL2 0x4f +#define SAA7127_REG_CHROMA_PHASE 0x5a +#define SAA7127_REG_GAINU 0x5b +#define SAA7127_REG_GAINV 0x5c +#define SAA7127_REG_BLACK_LEVEL 0x5d +#define SAA7127_REG_BLANKING_LEVEL 0x5e +#define SAA7127_REG_VBI_BLANKING 0x5f +#define SAA7127_REG_DAC_CONTROL 0x61 +#define SAA7127_REG_BURST_AMP 0x62 +#define SAA7127_REG_SUBC3 0x63 +#define SAA7127_REG_SUBC2 0x64 +#define SAA7127_REG_SUBC1 0x65 +#define SAA7127_REG_SUBC0 0x66 +#define SAA7127_REG_LINE_21_ODD_0 0x67 +#define SAA7127_REG_LINE_21_ODD_1 0x68 +#define SAA7127_REG_LINE_21_EVEN_0 0x69 +#define SAA7127_REG_LINE_21_EVEN_1 0x6a +#define SAA7127_REG_RCV_PORT_CONTROL 0x6b +#define SAA7127_REG_VTRIG 0x6c +#define SAA7127_REG_HTRIG_HI 0x6d +#define SAA7127_REG_MULTI 0x6e +#define SAA7127_REG_CLOSED_CAPTION 0x6f +#define SAA7127_REG_RCV2_OUTPUT_START 0x70 +#define SAA7127_REG_RCV2_OUTPUT_END 0x71 +#define SAA7127_REG_RCV2_OUTPUT_MSBS 0x72 +#define SAA7127_REG_TTX_REQUEST_H_START 0x73 +#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH 0x74 +#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT 0x75 +#define SAA7127_REG_TTX_ODD_REQ_VERT_START 0x76 +#define SAA7127_REG_TTX_ODD_REQ_VERT_END 0x77 +#define SAA7127_REG_TTX_EVEN_REQ_VERT_START 0x78 +#define SAA7127_REG_TTX_EVEN_REQ_VERT_END 0x79 +#define SAA7127_REG_FIRST_ACTIVE 0x7a +#define SAA7127_REG_LAST_ACTIVE 0x7b +#define SAA7127_REG_MSB_VERTICAL 0x7c +#define SAA7127_REG_DISABLE_TTX_LINE_LO_0 0x7e +#define SAA7127_REG_DISABLE_TTX_LINE_LO_1 0x7f + +/* + ********************************************************************** + * + * Arrays with configuration parameters for the SAA7127 + * + ********************************************************************** + */ + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +static const struct i2c_reg_value saa7129_init_config_extra[] = { + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x38 }, + { SAA7127_REG_VTRIG, 0xfa }, + { 0, 0 } +}; + +static const struct i2c_reg_value saa7127_init_config_common[] = { + { SAA7127_REG_WIDESCREEN_CONFIG, 0x0d }, + { SAA7127_REG_WIDESCREEN_ENABLE, 0x00 }, + { SAA7127_REG_COPYGEN_0, 0x77 }, + { SAA7127_REG_COPYGEN_1, 0x41 }, + { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ + { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, + { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, + { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, + { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ + { SAA7127_REG_LINE_21_ODD_0, 0x77 }, + { SAA7127_REG_LINE_21_ODD_1, 0x41 }, + { SAA7127_REG_LINE_21_EVEN_0, 0x88 }, + { SAA7127_REG_LINE_21_EVEN_1, 0x41 }, + { SAA7127_REG_RCV_PORT_CONTROL, 0x12 }, + { SAA7127_REG_VTRIG, 0xf9 }, + { SAA7127_REG_HTRIG_HI, 0x00 }, + { SAA7127_REG_RCV2_OUTPUT_START, 0x41 }, + { SAA7127_REG_RCV2_OUTPUT_END, 0xc3 }, + { SAA7127_REG_RCV2_OUTPUT_MSBS, 0x00 }, + { SAA7127_REG_TTX_REQUEST_H_START, 0x3e }, + { SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH, 0xb8 }, + { SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT, 0x03 }, + { SAA7127_REG_TTX_ODD_REQ_VERT_START, 0x15 }, + { SAA7127_REG_TTX_ODD_REQ_VERT_END, 0x16 }, + { SAA7127_REG_TTX_EVEN_REQ_VERT_START, 0x15 }, + { SAA7127_REG_TTX_EVEN_REQ_VERT_END, 0x16 }, + { SAA7127_REG_FIRST_ACTIVE, 0x1a }, + { SAA7127_REG_LAST_ACTIVE, 0x01 }, + { SAA7127_REG_MSB_VERTICAL, 0xc0 }, + { SAA7127_REG_DISABLE_TTX_LINE_LO_0, 0x00 }, + { SAA7127_REG_DISABLE_TTX_LINE_LO_1, 0x00 }, + { 0, 0 } +}; + +#define SAA7127_60HZ_DAC_CONTROL 0x15 +static const struct i2c_reg_value saa7127_init_config_60hz[] = { + { SAA7127_REG_BURST_START, 0x19 }, + /* BURST_END is also used as a chip ID in saa7127_probe */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0xa3 }, + { SAA7127_REG_GAINU, 0x98 }, + { SAA7127_REG_GAINV, 0xd3 }, + { SAA7127_REG_BLACK_LEVEL, 0x39 }, + { SAA7127_REG_BLANKING_LEVEL, 0x2e }, + { SAA7127_REG_VBI_BLANKING, 0x2e }, + { SAA7127_REG_DAC_CONTROL, 0x15 }, + { SAA7127_REG_BURST_AMP, 0x4d }, + { SAA7127_REG_SUBC3, 0x1f }, + { SAA7127_REG_SUBC2, 0x7c }, + { SAA7127_REG_SUBC1, 0xf0 }, + { SAA7127_REG_SUBC0, 0x21 }, + { SAA7127_REG_MULTI, 0x90 }, + { SAA7127_REG_CLOSED_CAPTION, 0x11 }, + { 0, 0 } +}; + +#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02 +static struct i2c_reg_value saa7127_init_config_50hz_pal[] = { + { SAA7127_REG_BURST_START, 0x21 }, + /* BURST_END is also used as a chip ID in saa7127_probe */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0x3f }, + { SAA7127_REG_GAINU, 0x7d }, + { SAA7127_REG_GAINV, 0xaf }, + { SAA7127_REG_BLACK_LEVEL, 0x33 }, + { SAA7127_REG_BLANKING_LEVEL, 0x35 }, + { SAA7127_REG_VBI_BLANKING, 0x35 }, + { SAA7127_REG_DAC_CONTROL, 0x02 }, + { SAA7127_REG_BURST_AMP, 0x2f }, + { SAA7127_REG_SUBC3, 0xcb }, + { SAA7127_REG_SUBC2, 0x8a }, + { SAA7127_REG_SUBC1, 0x09 }, + { SAA7127_REG_SUBC0, 0x2a }, + { SAA7127_REG_MULTI, 0xa0 }, + { SAA7127_REG_CLOSED_CAPTION, 0x00 }, + { 0, 0 } +}; + +#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08 +static struct i2c_reg_value saa7127_init_config_50hz_secam[] = { + { SAA7127_REG_BURST_START, 0x21 }, + /* BURST_END is also used as a chip ID in saa7127_probe */ + { SAA7127_REG_BURST_END, 0x1d }, + { SAA7127_REG_CHROMA_PHASE, 0x3f }, + { SAA7127_REG_GAINU, 0x6a }, + { SAA7127_REG_GAINV, 0x81 }, + { SAA7127_REG_BLACK_LEVEL, 0x33 }, + { SAA7127_REG_BLANKING_LEVEL, 0x35 }, + { SAA7127_REG_VBI_BLANKING, 0x35 }, + { SAA7127_REG_DAC_CONTROL, 0x08 }, + { SAA7127_REG_BURST_AMP, 0x2f }, + { SAA7127_REG_SUBC3, 0xb2 }, + { SAA7127_REG_SUBC2, 0x3b }, + { SAA7127_REG_SUBC1, 0xa3 }, + { SAA7127_REG_SUBC0, 0x28 }, + { SAA7127_REG_MULTI, 0x90 }, + { SAA7127_REG_CLOSED_CAPTION, 0x00 }, + { 0, 0 } +}; + +/* + ********************************************************************** + * + * Encoder Struct, holds the configuration state of the encoder + * + ********************************************************************** + */ + +struct saa7127_state { + struct v4l2_subdev sd; + v4l2_std_id std; + u32 ident; + enum saa7127_input_type input_type; + enum saa7127_output_type output_type; + int video_enable; + int wss_enable; + u16 wss_mode; + int cc_enable; + u16 cc_data; + int xds_enable; + u16 xds_data; + int vps_enable; + u8 vps_data[5]; + u8 reg_2d; + u8 reg_3a; + u8 reg_3a_cb; /* colorbar bit */ + u8 reg_61; +}; + +static inline struct saa7127_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7127_state, sd); +} + +static const char * const output_strs[] = +{ + "S-Video + Composite", + "Composite", + "S-Video", + "RGB", + "YUV C", + "YUV V" +}; + +static const char * const wss_strs[] = { + "invalid", + "letterbox 14:9 center", + "letterbox 14:9 top", + "invalid", + "letterbox 16:9 top", + "invalid", + "invalid", + "16:9 full format anamorphic", + "4:3 full format", + "invalid", + "invalid", + "letterbox 16:9 center", + "invalid", + "letterbox >16:9 center", + "14:9 full format center", + "invalid", +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7127_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + for (i = 0; i < 3; i++) { + if (i2c_smbus_write_byte_data(client, reg, val) == 0) + return 0; + } + v4l2_err(sd, "I2C Write Problem\n"); + return -1; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_write_inittab(struct v4l2_subdev *sd, + const struct i2c_reg_value *regs) +{ + while (regs->reg != 0) { + saa7127_write(sd, regs->reg, regs->value); + regs++; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 16)) + return -EINVAL; + if (state->vps_enable != enable) { + v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off"); + saa7127_write(sd, 0x54, enable << 7); + state->vps_enable = enable; + } + if (!enable) + return 0; + + state->vps_data[0] = data->data[2]; + state->vps_data[1] = data->data[8]; + state->vps_data[2] = data->data[9]; + state->vps_data[3] = data->data[10]; + state->vps_data[4] = data->data[11]; + v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data); + saa7127_write(sd, 0x55, state->vps_data[0]); + saa7127_write(sd, 0x56, state->vps_data[1]); + saa7127_write(sd, 0x57, state->vps_data[2]); + saa7127_write(sd, 0x58, state->vps_data[3]); + saa7127_write(sd, 0x59, state->vps_data[4]); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + u16 cc = data->data[1] << 8 | data->data[0]; + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 21)) + return -EINVAL; + if (state->cc_enable != enable) { + v4l2_dbg(1, debug, sd, + "Turn CC %s\n", enable ? "on" : "off"); + saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION, + (state->xds_enable << 7) | (enable << 6) | 0x11); + state->cc_enable = enable; + } + if (!enable) + return 0; + + v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc); + saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff); + saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8); + state->cc_data = cc; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + u16 xds = data->data[1] << 8 | data->data[0]; + int enable = (data->line != 0); + + if (enable && (data->field != 1 || data->line != 21)) + return -EINVAL; + if (state->xds_enable != enable) { + v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off"); + saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION, + (enable << 7) | (state->cc_enable << 6) | 0x11); + state->xds_enable = enable; + } + if (!enable) + return 0; + + v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds); + saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff); + saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8); + state->xds_data = xds; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + struct saa7127_state *state = to_state(sd); + int enable = (data->line != 0); + + if (enable && (data->field != 0 || data->line != 23)) + return -EINVAL; + if (state->wss_enable != enable) { + v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off"); + saa7127_write(sd, 0x27, enable << 7); + state->wss_enable = enable; + } + if (!enable) + return 0; + + saa7127_write(sd, 0x26, data->data[0]); + saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f)); + v4l2_dbg(1, debug, sd, + "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]); + state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0]; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable) +{ + struct saa7127_state *state = to_state(sd); + + if (enable) { + v4l2_dbg(1, debug, sd, "Enable Video Output\n"); + saa7127_write(sd, 0x2d, state->reg_2d); + saa7127_write(sd, 0x61, state->reg_61); + } else { + v4l2_dbg(1, debug, sd, "Disable Video Output\n"); + saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0)); + saa7127_write(sd, 0x61, (state->reg_61 | 0xc0)); + } + state->video_enable = enable; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7127_state *state = to_state(sd); + const struct i2c_reg_value *inittab; + + if (std & V4L2_STD_525_60) { + v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n"); + inittab = saa7127_init_config_60hz; + state->reg_61 = SAA7127_60HZ_DAC_CONTROL; + + } else if (state->ident == V4L2_IDENT_SAA7129 && + (std & V4L2_STD_SECAM) && + !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) { + + /* If and only if SECAM, with a SAA712[89] */ + v4l2_dbg(1, debug, sd, + "Selecting 50 Hz SECAM video Standard\n"); + inittab = saa7127_init_config_50hz_secam; + state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL; + + } else { + v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n"); + inittab = saa7127_init_config_50hz_pal; + state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL; + } + + /* Write Table */ + saa7127_write_inittab(sd, inittab); + state->std = std; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) +{ + struct saa7127_state *state = to_state(sd); + + switch (output) { + case SAA7127_OUTPUT_TYPE_RGB: + state->reg_2d = 0x0f; /* RGB + CVBS (for sync) */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_COMPOSITE: + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x20; /* CVBS only */ + else + state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_SVIDEO: + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x18; /* Y + C */ + else + state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + case SAA7127_OUTPUT_TYPE_YUV_V: + state->reg_2d = 0x4f; /* reg 2D = 01001111, all DAC's on, RGB + VBS */ + state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ + break; + + case SAA7127_OUTPUT_TYPE_YUV_C: + state->reg_2d = 0x0f; /* reg 2D = 00001111, all DAC's on, RGB + CVBS */ + state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ + break; + + case SAA7127_OUTPUT_TYPE_BOTH: + if (state->ident == V4L2_IDENT_SAA7129) + state->reg_2d = 0x38; + else + state->reg_2d = 0xbf; + state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ + break; + + default: + return -EINVAL; + } + v4l2_dbg(1, debug, sd, + "Selecting %s output type\n", output_strs[output]); + + /* Configure Encoder */ + saa7127_write(sd, 0x2d, state->reg_2d); + saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb); + state->output_type = output; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_set_input_type(struct v4l2_subdev *sd, int input) +{ + struct saa7127_state *state = to_state(sd); + + switch (input) { + case SAA7127_INPUT_TYPE_NORMAL: /* avia */ + v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n"); + state->reg_3a_cb = 0; + break; + + case SAA7127_INPUT_TYPE_TEST_IMAGE: /* color bar */ + v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n"); + state->reg_3a_cb = 0x80; + break; + + default: + return -EINVAL; + } + saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb); + state->input_type = input; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7127_state *state = to_state(sd); + + if (state->std == std) + return 0; + return saa7127_set_std(sd, std); +} + +static int saa7127_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7127_state *state = to_state(sd); + int rc = 0; + + if (state->input_type != input) + rc = saa7127_set_input_type(sd, input); + if (rc == 0 && state->output_type != output) + rc = saa7127_set_output_type(sd, output); + return rc; +} + +static int saa7127_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa7127_state *state = to_state(sd); + + if (state->video_enable == enable) + return 0; + return saa7127_set_video_enable(sd, enable); +} + +static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) +{ + struct saa7127_state *state = to_state(sd); + + memset(fmt, 0, sizeof(*fmt)); + if (state->vps_enable) + fmt->service_lines[0][16] = V4L2_SLICED_VPS; + if (state->wss_enable) + fmt->service_lines[0][23] = V4L2_SLICED_WSS_625; + if (state->cc_enable) { + fmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525; + fmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525; + } + fmt->service_set = + (state->vps_enable ? V4L2_SLICED_VPS : 0) | + (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) | + (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0); + return 0; +} + +static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) +{ + switch (data->id) { + case V4L2_SLICED_WSS_625: + return saa7127_set_wss(sd, data); + case V4L2_SLICED_VPS: + return saa7127_set_vps(sd, data); + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) + return saa7127_set_cc(sd, data); + return saa7127_set_xds(sd, data); + default: + return -EINVAL; + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa7127_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int saa7127_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int saa7127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct saa7127_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0); +} + +static int saa7127_log_status(struct v4l2_subdev *sd) +{ + struct saa7127_state *state = to_state(sd); + + v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz"); + v4l2_info(sd, "Input: %s\n", state->input_type ? "color bars" : "normal"); + v4l2_info(sd, "Output: %s\n", state->video_enable ? + output_strs[state->output_type] : "disabled"); + v4l2_info(sd, "WSS: %s\n", state->wss_enable ? + wss_strs[state->wss_mode] : "disabled"); + v4l2_info(sd, "VPS: %s\n", state->vps_enable ? "enabled" : "disabled"); + v4l2_info(sd, "CC: %s\n", state->cc_enable ? "enabled" : "disabled"); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa7127_core_ops = { + .log_status = saa7127_log_status, + .g_chip_ident = saa7127_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = saa7127_g_register, + .s_register = saa7127_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops saa7127_video_ops = { + .s_std_output = saa7127_s_std_output, + .s_routing = saa7127_s_routing, + .s_stream = saa7127_s_stream, +}; + +static const struct v4l2_subdev_vbi_ops saa7127_vbi_ops = { + .s_vbi_data = saa7127_s_vbi_data, + .g_sliced_fmt = saa7127_g_sliced_fmt, +}; + +static const struct v4l2_subdev_ops saa7127_ops = { + .core = &saa7127_core_ops, + .video = &saa7127_video_ops, + .vbi = &saa7127_vbi_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int saa7127_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct saa7127_state *state; + struct v4l2_subdev *sd; + struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 }; /* set to disabled */ + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", + client->addr << 1); + + state = kzalloc(sizeof(struct saa7127_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &saa7127_ops); + + /* First test register 0: Bits 5-7 are a version ID (should be 0), + and bit 2 should also be 0. + This is rather general, so the second test is more specific and + looks at the 'ending point of burst in clock cycles' which is + 0x1d after a reset and not expected to ever change. */ + if ((saa7127_read(sd, 0) & 0xe4) != 0 || + (saa7127_read(sd, 0x29) & 0x3f) != 0x1d) { + v4l2_dbg(1, debug, sd, "saa7127 not found\n"); + kfree(state); + return -ENODEV; + } + + if (id->driver_data) { /* Chip type is already known */ + state->ident = id->driver_data; + } else { /* Needs detection */ + int read_result; + + /* Detect if it's an saa7129 */ + read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2); + saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa); + if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) { + saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, + read_result); + state->ident = V4L2_IDENT_SAA7129; + strlcpy(client->name, "saa7129", I2C_NAME_SIZE); + } else { + state->ident = V4L2_IDENT_SAA7127; + strlcpy(client->name, "saa7127", I2C_NAME_SIZE); + } + } + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + v4l2_dbg(1, debug, sd, "Configuring encoder\n"); + saa7127_write_inittab(sd, saa7127_init_config_common); + saa7127_set_std(sd, V4L2_STD_NTSC); + saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); + saa7127_set_vps(sd, &vbi); + saa7127_set_wss(sd, &vbi); + saa7127_set_cc(sd, &vbi); + saa7127_set_xds(sd, &vbi); + if (test_image == 1) + /* The Encoder has an internal Colorbar generator */ + /* This can be used for debugging */ + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); + else + saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); + saa7127_set_video_enable(sd, 1); + + if (state->ident == V4L2_IDENT_SAA7129) + saa7127_write_inittab(sd, saa7129_init_config_extra); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int saa7127_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + /* Turn off TV output */ + saa7127_set_video_enable(sd, 0); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_device_id saa7127_id[] = { + { "saa7127_auto", 0 }, /* auto-detection */ + { "saa7126", V4L2_IDENT_SAA7127 }, + { "saa7127", V4L2_IDENT_SAA7127 }, + { "saa7128", V4L2_IDENT_SAA7129 }, + { "saa7129", V4L2_IDENT_SAA7129 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7127_id); + +static struct i2c_driver saa7127_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7127", + }, + .probe = saa7127_probe, + .remove = saa7127_remove, + .id_table = saa7127_id, +}; + +module_i2c_driver(saa7127_driver); diff --git a/drivers/media/i2c/saa717x.c b/drivers/media/i2c/saa717x.c new file mode 100644 index 000000000000..1e84466515aa --- /dev/null +++ b/drivers/media/i2c/saa717x.c @@ -0,0 +1,1378 @@ +/* + * saa717x - Philips SAA717xHL video decoder driver + * + * Based on the saa7115 driver + * + * Changes by Ohta Kyuma <alpha292@bremen.or.jp> + * - Apply to SAA717x,NEC uPD64031,uPD64083. (1/31/2004) + * + * Changes by T.Adachi (tadachi@tadachi-net.com) + * - support audio, video scaler etc, and checked the initialize sequence. + * + * Cleaned up by Hans Verkuil <hverkuil@xs4all.nl> + * + * Note: this is a reversed engineered driver based on captures from + * the I2C bus under Windows. This chip is very similar to the saa7134, + * though. Unfortunately, this driver is currently only working for NTSC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sched.h> + +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver"); +MODULE_AUTHOR("K. Ohta, T. Adachi, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +struct saa717x_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + v4l2_std_id std; + int input; + int enable; + int radio; + int playback; + int audio; + int tuner_audio_mode; + int audio_main_mute; + int audio_main_vol_r; + int audio_main_vol_l; + u16 audio_main_bass; + u16 audio_main_treble; + u16 audio_main_volume; + u16 audio_main_balance; + int audio_input; +}; + +static inline struct saa717x_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa717x_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa717x_state, hdl)->sd; +} + +/* ----------------------------------------------------------------------- */ + +/* for audio mode */ +#define TUNER_AUDIO_MONO 0 /* LL */ +#define TUNER_AUDIO_STEREO 1 /* LR */ +#define TUNER_AUDIO_LANG1 2 /* LL */ +#define TUNER_AUDIO_LANG2 3 /* RR */ + +#define SAA717X_NTSC_WIDTH (704) +#define SAA717X_NTSC_HEIGHT (480) + +/* ----------------------------------------------------------------------- */ + +static int saa717x_write(struct v4l2_subdev *sd, u32 reg, u32 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adap = client->adapter; + int fw_addr = reg == 0x454 || (reg >= 0x464 && reg <= 0x478) || reg == 0x480 || reg == 0x488; + unsigned char mm1[6]; + struct i2c_msg msg; + + msg.flags = 0; + msg.addr = client->addr; + mm1[0] = (reg >> 8) & 0xff; + mm1[1] = reg & 0xff; + + if (fw_addr) { + mm1[4] = (value >> 16) & 0xff; + mm1[3] = (value >> 8) & 0xff; + mm1[2] = value & 0xff; + } else { + mm1[2] = value & 0xff; + } + msg.len = fw_addr ? 5 : 3; /* Long Registers have *only* three bytes! */ + msg.buf = mm1; + v4l2_dbg(2, debug, sd, "wrote: reg 0x%03x=%08x\n", reg, value); + return i2c_transfer(adap, &msg, 1) == 1; +} + +static void saa717x_write_regs(struct v4l2_subdev *sd, u32 *data) +{ + while (data[0] || data[1]) { + saa717x_write(sd, data[0], data[1]); + data += 2; + } +} + +static u32 saa717x_read(struct v4l2_subdev *sd, u32 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adap = client->adapter; + int fw_addr = (reg >= 0x404 && reg <= 0x4b8) || reg == 0x528; + unsigned char mm1[2]; + unsigned char mm2[4] = { 0, 0, 0, 0 }; + struct i2c_msg msgs[2]; + u32 value; + + msgs[0].flags = 0; + msgs[1].flags = I2C_M_RD; + msgs[0].addr = msgs[1].addr = client->addr; + mm1[0] = (reg >> 8) & 0xff; + mm1[1] = reg & 0xff; + msgs[0].len = 2; + msgs[0].buf = mm1; + msgs[1].len = fw_addr ? 3 : 1; /* Multibyte Registers contains *only* 3 bytes */ + msgs[1].buf = mm2; + i2c_transfer(adap, msgs, 2); + + if (fw_addr) + value = (mm2[2] & 0xff) | ((mm2[1] & 0xff) >> 8) | ((mm2[0] & 0xff) >> 16); + else + value = mm2[0] & 0xff; + + v4l2_dbg(2, debug, sd, "read: reg 0x%03x=0x%08x\n", reg, value); + return value; +} + +/* ----------------------------------------------------------------------- */ + +static u32 reg_init_initialize[] = +{ + /* from linux driver */ + 0x101, 0x008, /* Increment delay */ + + 0x103, 0x000, /* Analog input control 2 */ + 0x104, 0x090, /* Analog input control 3 */ + 0x105, 0x090, /* Analog input control 4 */ + 0x106, 0x0eb, /* Horizontal sync start */ + 0x107, 0x0e0, /* Horizontal sync stop */ + 0x109, 0x055, /* Luminance control */ + + 0x10f, 0x02a, /* Chroma gain control */ + 0x110, 0x000, /* Chroma control 2 */ + + 0x114, 0x045, /* analog/ADC */ + + 0x118, 0x040, /* RAW data gain */ + 0x119, 0x080, /* RAW data offset */ + + 0x044, 0x000, /* VBI horizontal input window start (L) TASK A */ + 0x045, 0x000, /* VBI horizontal input window start (H) TASK A */ + 0x046, 0x0cf, /* VBI horizontal input window stop (L) TASK A */ + 0x047, 0x002, /* VBI horizontal input window stop (H) TASK A */ + + 0x049, 0x000, /* VBI vertical input window start (H) TASK A */ + + 0x04c, 0x0d0, /* VBI horizontal output length (L) TASK A */ + 0x04d, 0x002, /* VBI horizontal output length (H) TASK A */ + + 0x064, 0x080, /* Lumina brightness TASK A */ + 0x065, 0x040, /* Luminance contrast TASK A */ + 0x066, 0x040, /* Chroma saturation TASK A */ + /* 067H: Reserved */ + 0x068, 0x000, /* VBI horizontal scaling increment (L) TASK A */ + 0x069, 0x004, /* VBI horizontal scaling increment (H) TASK A */ + 0x06a, 0x000, /* VBI phase offset TASK A */ + + 0x06e, 0x000, /* Horizontal phase offset Luma TASK A */ + 0x06f, 0x000, /* Horizontal phase offset Chroma TASK A */ + + 0x072, 0x000, /* Vertical filter mode TASK A */ + + 0x084, 0x000, /* VBI horizontal input window start (L) TAKS B */ + 0x085, 0x000, /* VBI horizontal input window start (H) TAKS B */ + 0x086, 0x0cf, /* VBI horizontal input window stop (L) TAKS B */ + 0x087, 0x002, /* VBI horizontal input window stop (H) TAKS B */ + + 0x089, 0x000, /* VBI vertical input window start (H) TAKS B */ + + 0x08c, 0x0d0, /* VBI horizontal output length (L) TASK B */ + 0x08d, 0x002, /* VBI horizontal output length (H) TASK B */ + + 0x0a4, 0x080, /* Lumina brightness TASK B */ + 0x0a5, 0x040, /* Luminance contrast TASK B */ + 0x0a6, 0x040, /* Chroma saturation TASK B */ + /* 0A7H reserved */ + 0x0a8, 0x000, /* VBI horizontal scaling increment (L) TASK B */ + 0x0a9, 0x004, /* VBI horizontal scaling increment (H) TASK B */ + 0x0aa, 0x000, /* VBI phase offset TASK B */ + + 0x0ae, 0x000, /* Horizontal phase offset Luma TASK B */ + 0x0af, 0x000, /*Horizontal phase offset Chroma TASK B */ + + 0x0b2, 0x000, /* Vertical filter mode TASK B */ + + 0x00c, 0x000, /* Start point GREEN path */ + 0x00d, 0x000, /* Start point BLUE path */ + 0x00e, 0x000, /* Start point RED path */ + + 0x010, 0x010, /* GREEN path gamma curve --- */ + 0x011, 0x020, + 0x012, 0x030, + 0x013, 0x040, + 0x014, 0x050, + 0x015, 0x060, + 0x016, 0x070, + 0x017, 0x080, + 0x018, 0x090, + 0x019, 0x0a0, + 0x01a, 0x0b0, + 0x01b, 0x0c0, + 0x01c, 0x0d0, + 0x01d, 0x0e0, + 0x01e, 0x0f0, + 0x01f, 0x0ff, /* --- GREEN path gamma curve */ + + 0x020, 0x010, /* BLUE path gamma curve --- */ + 0x021, 0x020, + 0x022, 0x030, + 0x023, 0x040, + 0x024, 0x050, + 0x025, 0x060, + 0x026, 0x070, + 0x027, 0x080, + 0x028, 0x090, + 0x029, 0x0a0, + 0x02a, 0x0b0, + 0x02b, 0x0c0, + 0x02c, 0x0d0, + 0x02d, 0x0e0, + 0x02e, 0x0f0, + 0x02f, 0x0ff, /* --- BLUE path gamma curve */ + + 0x030, 0x010, /* RED path gamma curve --- */ + 0x031, 0x020, + 0x032, 0x030, + 0x033, 0x040, + 0x034, 0x050, + 0x035, 0x060, + 0x036, 0x070, + 0x037, 0x080, + 0x038, 0x090, + 0x039, 0x0a0, + 0x03a, 0x0b0, + 0x03b, 0x0c0, + 0x03c, 0x0d0, + 0x03d, 0x0e0, + 0x03e, 0x0f0, + 0x03f, 0x0ff, /* --- RED path gamma curve */ + + 0x109, 0x085, /* Luminance control */ + + /**** from app start ****/ + 0x584, 0x000, /* AGC gain control */ + 0x585, 0x000, /* Program count */ + 0x586, 0x003, /* Status reset */ + 0x588, 0x0ff, /* Number of audio samples (L) */ + 0x589, 0x00f, /* Number of audio samples (M) */ + 0x58a, 0x000, /* Number of audio samples (H) */ + 0x58b, 0x000, /* Audio select */ + 0x58c, 0x010, /* Audio channel assign1 */ + 0x58d, 0x032, /* Audio channel assign2 */ + 0x58e, 0x054, /* Audio channel assign3 */ + 0x58f, 0x023, /* Audio format */ + 0x590, 0x000, /* SIF control */ + + 0x595, 0x000, /* ?? */ + 0x596, 0x000, /* ?? */ + 0x597, 0x000, /* ?? */ + + 0x464, 0x00, /* Digital input crossbar1 */ + + 0x46c, 0xbbbb10, /* Digital output selection1-3 */ + 0x470, 0x101010, /* Digital output selection4-6 */ + + 0x478, 0x00, /* Sound feature control */ + + 0x474, 0x18, /* Softmute control */ + + 0x454, 0x0425b9, /* Sound Easy programming(reset) */ + 0x454, 0x042539, /* Sound Easy programming(reset) */ + + + /**** common setting( of DVD play, including scaler commands) ****/ + 0x042, 0x003, /* Data path configuration for VBI (TASK A) */ + + 0x082, 0x003, /* Data path configuration for VBI (TASK B) */ + + 0x108, 0x0f8, /* Sync control */ + 0x2a9, 0x0fd, /* ??? */ + 0x102, 0x089, /* select video input "mode 9" */ + 0x111, 0x000, /* Mode/delay control */ + + 0x10e, 0x00a, /* Chroma control 1 */ + + 0x594, 0x002, /* SIF, analog I/O select */ + + 0x454, 0x0425b9, /* Sound */ + 0x454, 0x042539, + + 0x111, 0x000, + 0x10e, 0x00a, + 0x464, 0x000, + 0x300, 0x000, + 0x301, 0x006, + 0x302, 0x000, + 0x303, 0x006, + 0x308, 0x040, + 0x309, 0x000, + 0x30a, 0x000, + 0x30b, 0x000, + 0x000, 0x002, + 0x001, 0x000, + 0x002, 0x000, + 0x003, 0x000, + 0x004, 0x033, + 0x040, 0x01d, + 0x041, 0x001, + 0x042, 0x004, + 0x043, 0x000, + 0x080, 0x01e, + 0x081, 0x001, + 0x082, 0x004, + 0x083, 0x000, + 0x190, 0x018, + 0x115, 0x000, + 0x116, 0x012, + 0x117, 0x018, + 0x04a, 0x011, + 0x08a, 0x011, + 0x04b, 0x000, + 0x08b, 0x000, + 0x048, 0x000, + 0x088, 0x000, + 0x04e, 0x012, + 0x08e, 0x012, + 0x058, 0x012, + 0x098, 0x012, + 0x059, 0x000, + 0x099, 0x000, + 0x05a, 0x003, + 0x09a, 0x003, + 0x05b, 0x001, + 0x09b, 0x001, + 0x054, 0x008, + 0x094, 0x008, + 0x055, 0x000, + 0x095, 0x000, + 0x056, 0x0c7, + 0x096, 0x0c7, + 0x057, 0x002, + 0x097, 0x002, + 0x0ff, 0x0ff, + 0x060, 0x001, + 0x0a0, 0x001, + 0x061, 0x000, + 0x0a1, 0x000, + 0x062, 0x000, + 0x0a2, 0x000, + 0x063, 0x000, + 0x0a3, 0x000, + 0x070, 0x000, + 0x0b0, 0x000, + 0x071, 0x004, + 0x0b1, 0x004, + 0x06c, 0x0e9, + 0x0ac, 0x0e9, + 0x06d, 0x003, + 0x0ad, 0x003, + 0x05c, 0x0d0, + 0x09c, 0x0d0, + 0x05d, 0x002, + 0x09d, 0x002, + 0x05e, 0x0f2, + 0x09e, 0x0f2, + 0x05f, 0x000, + 0x09f, 0x000, + 0x074, 0x000, + 0x0b4, 0x000, + 0x075, 0x000, + 0x0b5, 0x000, + 0x076, 0x000, + 0x0b6, 0x000, + 0x077, 0x000, + 0x0b7, 0x000, + 0x195, 0x008, + 0x0ff, 0x0ff, + 0x108, 0x0f8, + 0x111, 0x000, + 0x10e, 0x00a, + 0x2a9, 0x0fd, + 0x464, 0x001, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + + + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x193, 0x000, + 0x300, 0x000, + 0x301, 0x006, + 0x302, 0x000, + 0x303, 0x006, + 0x308, 0x040, + 0x309, 0x000, + 0x30a, 0x000, + 0x30b, 0x000, + 0x000, 0x002, + 0x001, 0x000, + 0x002, 0x000, + 0x003, 0x000, + 0x004, 0x033, + 0x040, 0x01d, + 0x041, 0x001, + 0x042, 0x004, + 0x043, 0x000, + 0x080, 0x01e, + 0x081, 0x001, + 0x082, 0x004, + 0x083, 0x000, + 0x190, 0x018, + 0x115, 0x000, + 0x116, 0x012, + 0x117, 0x018, + 0x04a, 0x011, + 0x08a, 0x011, + 0x04b, 0x000, + 0x08b, 0x000, + 0x048, 0x000, + 0x088, 0x000, + 0x04e, 0x012, + 0x08e, 0x012, + 0x058, 0x012, + 0x098, 0x012, + 0x059, 0x000, + 0x099, 0x000, + 0x05a, 0x003, + 0x09a, 0x003, + 0x05b, 0x001, + 0x09b, 0x001, + 0x054, 0x008, + 0x094, 0x008, + 0x055, 0x000, + 0x095, 0x000, + 0x056, 0x0c7, + 0x096, 0x0c7, + 0x057, 0x002, + 0x097, 0x002, + 0x060, 0x001, + 0x0a0, 0x001, + 0x061, 0x000, + 0x0a1, 0x000, + 0x062, 0x000, + 0x0a2, 0x000, + 0x063, 0x000, + 0x0a3, 0x000, + 0x070, 0x000, + 0x0b0, 0x000, + 0x071, 0x004, + 0x0b1, 0x004, + 0x06c, 0x0e9, + 0x0ac, 0x0e9, + 0x06d, 0x003, + 0x0ad, 0x003, + 0x05c, 0x0d0, + 0x09c, 0x0d0, + 0x05d, 0x002, + 0x09d, 0x002, + 0x05e, 0x0f2, + 0x09e, 0x0f2, + 0x05f, 0x000, + 0x09f, 0x000, + 0x074, 0x000, + 0x0b4, 0x000, + 0x075, 0x000, + 0x0b5, 0x000, + 0x076, 0x000, + 0x0b6, 0x000, + 0x077, 0x000, + 0x0b7, 0x000, + 0x195, 0x008, + 0x598, 0x0e7, + 0x599, 0x07d, + 0x59a, 0x018, + 0x59c, 0x066, + 0x59d, 0x090, + 0x59e, 0x001, + 0x584, 0x000, + 0x585, 0x000, + 0x586, 0x003, + 0x588, 0x0ff, + 0x589, 0x00f, + 0x58a, 0x000, + 0x58b, 0x000, + 0x58c, 0x010, + 0x58d, 0x032, + 0x58e, 0x054, + 0x58f, 0x023, + 0x590, 0x000, + 0x595, 0x000, + 0x596, 0x000, + 0x597, 0x000, + 0x464, 0x000, + 0x46c, 0xbbbb10, + 0x470, 0x101010, + 0x478, 0x000, + 0x474, 0x018, + 0x454, 0x042135, + 0x193, 0x0a6, + 0x108, 0x0f8, + 0x042, 0x003, + 0x082, 0x003, + 0x454, 0x0425b9, + 0x454, 0x042539, + 0x193, 0x000, + 0x193, 0x0a6, + 0x464, 0x000, + + 0, 0 +}; + +/* Tuner */ +static u32 reg_init_tuner_input[] = { + 0x108, 0x0f8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x00a, /* Chroma control 1 */ + 0, 0 +}; + +/* Composite */ +static u32 reg_init_composite_input[] = { + 0x108, 0x0e8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x04a, /* Chroma control 1 */ + 0, 0 +}; + +/* S-Video */ +static u32 reg_init_svideo_input[] = { + 0x108, 0x0e8, /* Sync control */ + 0x111, 0x000, /* Mode/delay control */ + 0x10e, 0x04a, /* Chroma control 1 */ + 0, 0 +}; + +static u32 reg_set_audio_template[4][2] = +{ + { /* for MONO + tadachi 6/29 DMA audio output select? + Register 0x46c + 7-4: DMA2, 3-0: DMA1 ch. DMA4, DMA3 DMA2, DMA1 + 0: MAIN left, 1: MAIN right + 2: AUX1 left, 3: AUX1 right + 4: AUX2 left, 5: AUX2 right + 6: DPL left, 7: DPL right + 8: DPL center, 9: DPL surround + A: monitor output, B: digital sense */ + 0xbbbb00, + + /* tadachi 6/29 DAC and I2S output select? + Register 0x470 + 7-4:DAC right ch. 3-0:DAC left ch. + I2S1 right,left I2S2 right,left */ + 0x00, + }, + { /* for STEREO */ + 0xbbbb10, 0x101010, + }, + { /* for LANG1 */ + 0xbbbb00, 0x00, + }, + { /* for LANG2/SAP */ + 0xbbbb11, 0x111111, + } +}; + + +/* Get detected audio flags (from saa7134 driver) */ +static void get_inf_dev_status(struct v4l2_subdev *sd, + int *dual_flag, int *stereo_flag) +{ + u32 reg_data3; + + static char *stdres[0x20] = { + [0x00] = "no standard detected", + [0x01] = "B/G (in progress)", + [0x02] = "D/K (in progress)", + [0x03] = "M (in progress)", + + [0x04] = "B/G A2", + [0x05] = "B/G NICAM", + [0x06] = "D/K A2 (1)", + [0x07] = "D/K A2 (2)", + [0x08] = "D/K A2 (3)", + [0x09] = "D/K NICAM", + [0x0a] = "L NICAM", + [0x0b] = "I NICAM", + + [0x0c] = "M Korea", + [0x0d] = "M BTSC ", + [0x0e] = "M EIAJ", + + [0x0f] = "FM radio / IF 10.7 / 50 deemp", + [0x10] = "FM radio / IF 10.7 / 75 deemp", + [0x11] = "FM radio / IF sel / 50 deemp", + [0x12] = "FM radio / IF sel / 75 deemp", + + [0x13 ... 0x1e] = "unknown", + [0x1f] = "??? [in progress]", + }; + + + *dual_flag = *stereo_flag = 0; + + /* (demdec status: 0x528) */ + + /* read current status */ + reg_data3 = saa717x_read(sd, 0x0528); + + v4l2_dbg(1, debug, sd, "tvaudio thread status: 0x%x [%s%s%s]\n", + reg_data3, stdres[reg_data3 & 0x1f], + (reg_data3 & 0x000020) ? ",stereo" : "", + (reg_data3 & 0x000040) ? ",dual" : ""); + v4l2_dbg(1, debug, sd, "detailed status: " + "%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n", + (reg_data3 & 0x000080) ? " A2/EIAJ pilot tone " : "", + (reg_data3 & 0x000100) ? " A2/EIAJ dual " : "", + (reg_data3 & 0x000200) ? " A2/EIAJ stereo " : "", + (reg_data3 & 0x000400) ? " A2/EIAJ noise mute " : "", + + (reg_data3 & 0x000800) ? " BTSC/FM radio pilot " : "", + (reg_data3 & 0x001000) ? " SAP carrier " : "", + (reg_data3 & 0x002000) ? " BTSC stereo noise mute " : "", + (reg_data3 & 0x004000) ? " SAP noise mute " : "", + (reg_data3 & 0x008000) ? " VDSP " : "", + + (reg_data3 & 0x010000) ? " NICST " : "", + (reg_data3 & 0x020000) ? " NICDU " : "", + (reg_data3 & 0x040000) ? " NICAM muted " : "", + (reg_data3 & 0x080000) ? " NICAM reserve sound " : "", + + (reg_data3 & 0x100000) ? " init done " : ""); + + if (reg_data3 & 0x000220) { + v4l2_dbg(1, debug, sd, "ST!!!\n"); + *stereo_flag = 1; + } + + if (reg_data3 & 0x000140) { + v4l2_dbg(1, debug, sd, "DUAL!!!\n"); + *dual_flag = 1; + } +} + +/* regs write to set audio mode */ +static void set_audio_mode(struct v4l2_subdev *sd, int audio_mode) +{ + v4l2_dbg(1, debug, sd, "writing registers to set audio mode by set %d\n", + audio_mode); + + saa717x_write(sd, 0x46c, reg_set_audio_template[audio_mode][0]); + saa717x_write(sd, 0x470, reg_set_audio_template[audio_mode][1]); +} + +/* write regs to set audio volume, bass and treble */ +static int set_audio_regs(struct v4l2_subdev *sd, + struct saa717x_state *decoder) +{ + u8 mute = 0xac; /* -84 dB */ + u32 val; + unsigned int work_l, work_r; + + /* set SIF analog I/O select */ + saa717x_write(sd, 0x0594, decoder->audio_input); + v4l2_dbg(1, debug, sd, "set audio input %d\n", + decoder->audio_input); + + /* normalize ( 65535 to 0 -> 24 to -40 (not -84)) */ + work_l = (min(65536 - decoder->audio_main_balance, 32768) * decoder->audio_main_volume) / 32768; + work_r = (min(decoder->audio_main_balance, (u16)32768) * decoder->audio_main_volume) / 32768; + decoder->audio_main_vol_l = (long)work_l * (24 - (-40)) / 65535 - 40; + decoder->audio_main_vol_r = (long)work_r * (24 - (-40)) / 65535 - 40; + + /* set main volume */ + /* main volume L[7-0],R[7-0],0x00 24=24dB,-83dB, -84(mute) */ + /* def:0dB->6dB(MPG600GR) */ + /* if mute is on, set mute */ + if (decoder->audio_main_mute) { + val = mute | (mute << 8); + } else { + val = (u8)decoder->audio_main_vol_l | + ((u8)decoder->audio_main_vol_r << 8); + } + + saa717x_write(sd, 0x480, val); + + /* set bass and treble */ + val = decoder->audio_main_bass & 0x1f; + val |= (decoder->audio_main_treble & 0x1f) << 5; + saa717x_write(sd, 0x488, val); + return 0; +} + +/********** scaling staff ***********/ +static void set_h_prescale(struct v4l2_subdev *sd, + int task, int prescale) +{ + static const struct { + int xpsc; + int xacl; + int xc2_1; + int xdcg; + int vpfy; + } vals[] = { + /* XPSC XACL XC2_1 XDCG VPFY */ + { 1, 0, 0, 0, 0 }, + { 2, 2, 1, 2, 2 }, + { 3, 4, 1, 3, 2 }, + { 4, 8, 1, 4, 2 }, + { 5, 8, 1, 4, 2 }, + { 6, 8, 1, 4, 3 }, + { 7, 8, 1, 4, 3 }, + { 8, 15, 0, 4, 3 }, + { 9, 15, 0, 4, 3 }, + { 10, 16, 1, 5, 3 }, + }; + static const int count = ARRAY_SIZE(vals); + int i, task_shift; + + task_shift = task * 0x40; + for (i = 0; i < count; i++) + if (vals[i].xpsc == prescale) + break; + if (i == count) + return; + + /* horizonal prescaling */ + saa717x_write(sd, 0x60 + task_shift, vals[i].xpsc); + /* accumulation length */ + saa717x_write(sd, 0x61 + task_shift, vals[i].xacl); + /* level control */ + saa717x_write(sd, 0x62 + task_shift, + (vals[i].xc2_1 << 3) | vals[i].xdcg); + /*FIR prefilter control */ + saa717x_write(sd, 0x63 + task_shift, + (vals[i].vpfy << 2) | vals[i].vpfy); +} + +/********** scaling staff ***********/ +static void set_v_scale(struct v4l2_subdev *sd, int task, int yscale) +{ + int task_shift; + + task_shift = task * 0x40; + /* Vertical scaling ratio (LOW) */ + saa717x_write(sd, 0x70 + task_shift, yscale & 0xff); + /* Vertical scaling ratio (HI) */ + saa717x_write(sd, 0x71 + task_shift, yscale >> 8); +} + +static int saa717x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct saa717x_state *state = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + saa717x_write(sd, 0x10a, ctrl->val); + return 0; + + case V4L2_CID_CONTRAST: + saa717x_write(sd, 0x10b, ctrl->val); + return 0; + + case V4L2_CID_SATURATION: + saa717x_write(sd, 0x10c, ctrl->val); + return 0; + + case V4L2_CID_HUE: + saa717x_write(sd, 0x10d, ctrl->val); + return 0; + + case V4L2_CID_AUDIO_MUTE: + state->audio_main_mute = ctrl->val; + break; + + case V4L2_CID_AUDIO_VOLUME: + state->audio_main_volume = ctrl->val; + break; + + case V4L2_CID_AUDIO_BALANCE: + state->audio_main_balance = ctrl->val; + break; + + case V4L2_CID_AUDIO_TREBLE: + state->audio_main_treble = ctrl->val; + break; + + case V4L2_CID_AUDIO_BASS: + state->audio_main_bass = ctrl->val; + break; + + default: + return 0; + } + set_audio_regs(sd, state); + return 0; +} + +static int saa717x_s_video_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa717x_state *decoder = to_state(sd); + int is_tuner = input & 0x80; /* tuner input flag */ + + input &= 0x7f; + + v4l2_dbg(1, debug, sd, "decoder set input (%d)\n", input); + /* inputs from 0-9 are available*/ + /* saa717x have mode0-mode9 but mode5 is reserved. */ + if (input > 9 || input == 5) + return -EINVAL; + + if (decoder->input != input) { + int input_line = input; + + decoder->input = input_line; + v4l2_dbg(1, debug, sd, "now setting %s input %d\n", + input_line >= 6 ? "S-Video" : "Composite", + input_line); + + /* select mode */ + saa717x_write(sd, 0x102, + (saa717x_read(sd, 0x102) & 0xf0) | + input_line); + + /* bypass chrominance trap for modes 6..9 */ + saa717x_write(sd, 0x109, + (saa717x_read(sd, 0x109) & 0x7f) | + (input_line < 6 ? 0x0 : 0x80)); + + /* change audio_mode */ + if (is_tuner) { + /* tuner */ + set_audio_mode(sd, decoder->tuner_audio_mode); + } else { + /* Force to STEREO mode if Composite or + * S-Video were chosen */ + set_audio_mode(sd, TUNER_AUDIO_STEREO); + } + /* change initialize procedure (Composite/S-Video) */ + if (is_tuner) + saa717x_write_regs(sd, reg_init_tuner_input); + else if (input_line >= 6) + saa717x_write_regs(sd, reg_init_svideo_input); + else + saa717x_write_regs(sd, reg_init_composite_input); + } + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int saa717x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = saa717x_read(sd, reg->reg); + reg->size = 1; + return 0; +} + +static int saa717x_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u16 addr = reg->reg & 0xffff; + u8 val = reg->val & 0xff; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + saa717x_write(sd, addr, val); + return 0; +} +#endif + +static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) +{ + int prescale, h_scale, v_scale; + + v4l2_dbg(1, debug, sd, "decoder set size\n"); + + if (fmt->code != V4L2_MBUS_FMT_FIXED) + return -EINVAL; + + /* FIXME need better bounds checking here */ + if (fmt->width < 1 || fmt->width > 1440) + return -EINVAL; + if (fmt->height < 1 || fmt->height > 960) + return -EINVAL; + + fmt->field = V4L2_FIELD_INTERLACED; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + + /* scaling setting */ + /* NTSC and interlace only */ + prescale = SAA717X_NTSC_WIDTH / fmt->width; + if (prescale == 0) + prescale = 1; + h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / fmt->width; + /* interlace */ + v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / fmt->height; + + /* Horizontal prescaling etc */ + set_h_prescale(sd, 0, prescale); + set_h_prescale(sd, 1, prescale); + + /* Horizontal scaling increment */ + /* TASK A */ + saa717x_write(sd, 0x6C, (u8)(h_scale & 0xFF)); + saa717x_write(sd, 0x6D, (u8)((h_scale >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(sd, 0xAC, (u8)(h_scale & 0xFF)); + saa717x_write(sd, 0xAD, (u8)((h_scale >> 8) & 0xFF)); + + /* Vertical prescaling etc */ + set_v_scale(sd, 0, v_scale); + set_v_scale(sd, 1, v_scale); + + /* set video output size */ + /* video number of pixels at output */ + /* TASK A */ + saa717x_write(sd, 0x5C, (u8)(fmt->width & 0xFF)); + saa717x_write(sd, 0x5D, (u8)((fmt->width >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(sd, 0x9C, (u8)(fmt->width & 0xFF)); + saa717x_write(sd, 0x9D, (u8)((fmt->width >> 8) & 0xFF)); + + /* video number of lines at output */ + /* TASK A */ + saa717x_write(sd, 0x5E, (u8)(fmt->height & 0xFF)); + saa717x_write(sd, 0x5F, (u8)((fmt->height >> 8) & 0xFF)); + /* TASK B */ + saa717x_write(sd, 0x9E, (u8)(fmt->height & 0xFF)); + saa717x_write(sd, 0x9F, (u8)((fmt->height >> 8) & 0xFF)); + return 0; +} + +static int saa717x_s_radio(struct v4l2_subdev *sd) +{ + struct saa717x_state *decoder = to_state(sd); + + decoder->radio = 1; + return 0; +} + +static int saa717x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa717x_state *decoder = to_state(sd); + + v4l2_dbg(1, debug, sd, "decoder set norm "); + v4l2_dbg(1, debug, sd, "(not yet implementd)\n"); + + decoder->radio = 0; + decoder->std = std; + return 0; +} + +static int saa717x_s_audio_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa717x_state *decoder = to_state(sd); + + if (input < 3) { /* FIXME! --tadachi */ + decoder->audio_input = input; + v4l2_dbg(1, debug, sd, + "set decoder audio input to %d\n", + decoder->audio_input); + set_audio_regs(sd, decoder); + return 0; + } + return -ERANGE; +} + +static int saa717x_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct saa717x_state *decoder = to_state(sd); + + v4l2_dbg(1, debug, sd, "decoder %s output\n", + enable ? "enable" : "disable"); + decoder->enable = enable; + saa717x_write(sd, 0x193, enable ? 0xa6 : 0x26); + return 0; +} + +/* change audio mode */ +static int saa717x_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa717x_state *decoder = to_state(sd); + int audio_mode; + char *mes[4] = { + "MONO", "STEREO", "LANG1", "LANG2/SAP" + }; + + audio_mode = TUNER_AUDIO_STEREO; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + audio_mode = TUNER_AUDIO_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + audio_mode = TUNER_AUDIO_STEREO; + break; + case V4L2_TUNER_MODE_LANG2: + audio_mode = TUNER_AUDIO_LANG2; + break; + case V4L2_TUNER_MODE_LANG1: + audio_mode = TUNER_AUDIO_LANG1; + break; + } + + v4l2_dbg(1, debug, sd, "change audio mode to %s\n", + mes[audio_mode]); + decoder->tuner_audio_mode = audio_mode; + /* The registers are not changed here. */ + /* See DECODER_ENABLE_OUTPUT section. */ + set_audio_mode(sd, decoder->tuner_audio_mode); + return 0; +} + +static int saa717x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa717x_state *decoder = to_state(sd); + int dual_f, stereo_f; + + if (decoder->radio) + return 0; + get_inf_dev_status(sd, &dual_f, &stereo_f); + + v4l2_dbg(1, debug, sd, "DETECT==st:%d dual:%d\n", + stereo_f, dual_f); + + /* mono */ + if ((dual_f == 0) && (stereo_f == 0)) { + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==MONO\n"); + } + + /* stereo */ + if (stereo_f == 1) { + if (vt->audmode == V4L2_TUNER_MODE_STEREO || + vt->audmode == V4L2_TUNER_MODE_LANG1) { + vt->rxsubchans = V4L2_TUNER_SUB_STEREO; + v4l2_dbg(1, debug, sd, "DETECT==ST(ST)\n"); + } else { + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==ST(MONO)\n"); + } + } + + /* dual */ + if (dual_f == 1) { + if (vt->audmode == V4L2_TUNER_MODE_LANG2) { + vt->rxsubchans = V4L2_TUNER_SUB_LANG2 | V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==DUAL1\n"); + } else { + vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_MONO; + v4l2_dbg(1, debug, sd, "DETECT==DUAL2\n"); + } + } + return 0; +} + +static int saa717x_log_status(struct v4l2_subdev *sd) +{ + struct saa717x_state *state = to_state(sd); + + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops saa717x_ctrl_ops = { + .s_ctrl = saa717x_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops saa717x_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = saa717x_g_register, + .s_register = saa717x_s_register, +#endif + .s_std = saa717x_s_std, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .log_status = saa717x_log_status, +}; + +static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = { + .g_tuner = saa717x_g_tuner, + .s_tuner = saa717x_s_tuner, + .s_radio = saa717x_s_radio, +}; + +static const struct v4l2_subdev_video_ops saa717x_video_ops = { + .s_routing = saa717x_s_video_routing, + .s_mbus_fmt = saa717x_s_mbus_fmt, + .s_stream = saa717x_s_stream, +}; + +static const struct v4l2_subdev_audio_ops saa717x_audio_ops = { + .s_routing = saa717x_s_audio_routing, +}; + +static const struct v4l2_subdev_ops saa717x_ops = { + .core = &saa717x_core_ops, + .tuner = &saa717x_tuner_ops, + .audio = &saa717x_audio_ops, + .video = &saa717x_video_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +/* i2c implementation */ + +/* ----------------------------------------------------------------------- */ +static int saa717x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct saa717x_state *decoder; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + u8 id = 0; + char *p = ""; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + decoder = kzalloc(sizeof(struct saa717x_state), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa717x_ops); + + if (saa717x_write(sd, 0x5a4, 0xfe) && + saa717x_write(sd, 0x5a5, 0x0f) && + saa717x_write(sd, 0x5a6, 0x00) && + saa717x_write(sd, 0x5a7, 0x01)) + id = saa717x_read(sd, 0x5a0); + if (id != 0xc2 && id != 0x32 && id != 0xf2 && id != 0x6c) { + v4l2_dbg(1, debug, sd, "saa717x not found (id=%02x)\n", id); + kfree(decoder); + return -ENODEV; + } + if (id == 0xc2) + p = "saa7173"; + else if (id == 0x32) + p = "saa7174A"; + else if (id == 0x6c) + p = "saa7174HL"; + else + p = "saa7171"; + v4l2_info(sd, "%s found @ 0x%x (%s)\n", p, + client->addr << 1, client->adapter->name); + + hdl = &decoder->hdl; + v4l2_ctrl_handler_init(hdl, 9); + /* add in ascending ID order */ + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 68); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 64); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 42000); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_BASS, -16, 15, 1, 0); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, -16, 15, 1, 0); + v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(decoder); + return err; + } + + decoder->std = V4L2_STD_NTSC; + decoder->input = -1; + decoder->enable = 1; + + /* FIXME!! */ + decoder->playback = 0; /* initially capture mode used */ + decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */ + + decoder->audio_input = 2; /* FIXME!! */ + + decoder->tuner_audio_mode = TUNER_AUDIO_STEREO; + /* set volume, bass and treble */ + decoder->audio_main_vol_l = 6; + decoder->audio_main_vol_r = 6; + + v4l2_dbg(1, debug, sd, "writing init values\n"); + + /* FIXME!! */ + saa717x_write_regs(sd, reg_init_initialize); + + v4l2_ctrl_handler_setup(hdl); + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2*HZ); + return 0; +} + +static int saa717x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa717x_id[] = { + { "saa717x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa717x_id); + +static struct i2c_driver saa717x_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa717x", + }, + .probe = saa717x_probe, + .remove = saa717x_remove, + .id_table = saa717x_id, +}; + +module_i2c_driver(saa717x_driver); diff --git a/drivers/media/i2c/saa7185.c b/drivers/media/i2c/saa7185.c new file mode 100644 index 000000000000..2c6b65c76e2b --- /dev/null +++ b/drivers/media/i2c/saa7185.c @@ -0,0 +1,377 @@ +/* + * saa7185 - Philips SAA7185B video encoder driver version 0.0.3 + * + * Copyright (C) 1998 Dave Perks <dperks@ibm.net> + * + * Slight changes for video timing and attachment output by + * Wolfgang Scherr <scherr@net4you.net> + * + * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> + * - moved over to linux>=2.4.x i2c protocol (1/1/2003) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Philips SAA7185 video encoder driver"); +MODULE_AUTHOR("Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct saa7185 { + struct v4l2_subdev sd; + unsigned char reg[128]; + + v4l2_std_id norm; +}; + +static inline struct saa7185 *to_saa7185(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7185, sd); +} + +/* ----------------------------------------------------------------------- */ + +static inline int saa7185_read(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte(client); +} + +static int saa7185_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7185 *encoder = to_saa7185(sd); + + v4l2_dbg(1, debug, sd, "%02x set to %02x\n", reg, value); + encoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int saa7185_write_block(struct v4l2_subdev *sd, + const u8 *data, unsigned int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7185 *encoder = to_saa7185(sd); + int ret = -1; + u8 reg; + + /* the adv7175 has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + u8 block_data[32]; + int block_len; + + while (len >= 2) { + block_len = 0; + block_data[block_len++] = reg = data[0]; + do { + block_data[block_len++] = + encoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + ret = saa7185_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + } + + return ret; +} + +/* ----------------------------------------------------------------------- */ + +static const unsigned char init_common[] = { + 0x3a, 0x0f, /* CBENB=0, V656=0, VY2C=1, + * YUV2C=1, MY2C=1, MUV2C=1 */ + + 0x42, 0x6b, /* OVLY0=107 */ + 0x43, 0x00, /* OVLU0=0 white */ + 0x44, 0x00, /* OVLV0=0 */ + 0x45, 0x22, /* OVLY1=34 */ + 0x46, 0xac, /* OVLU1=172 yellow */ + 0x47, 0x0e, /* OVLV1=14 */ + 0x48, 0x03, /* OVLY2=3 */ + 0x49, 0x1d, /* OVLU2=29 cyan */ + 0x4a, 0xac, /* OVLV2=172 */ + 0x4b, 0xf0, /* OVLY3=240 */ + 0x4c, 0xc8, /* OVLU3=200 green */ + 0x4d, 0xb9, /* OVLV3=185 */ + 0x4e, 0xd4, /* OVLY4=212 */ + 0x4f, 0x38, /* OVLU4=56 magenta */ + 0x50, 0x47, /* OVLV4=71 */ + 0x51, 0xc1, /* OVLY5=193 */ + 0x52, 0xe3, /* OVLU5=227 red */ + 0x53, 0x54, /* OVLV5=84 */ + 0x54, 0xa3, /* OVLY6=163 */ + 0x55, 0x54, /* OVLU6=84 blue */ + 0x56, 0xf2, /* OVLV6=242 */ + 0x57, 0x90, /* OVLY7=144 */ + 0x58, 0x00, /* OVLU7=0 black */ + 0x59, 0x00, /* OVLV7=0 */ + + 0x5a, 0x00, /* CHPS=0 */ + 0x5b, 0x76, /* GAINU=118 */ + 0x5c, 0xa5, /* GAINV=165 */ + 0x5d, 0x3c, /* BLCKL=60 */ + 0x5e, 0x3a, /* BLNNL=58 */ + 0x5f, 0x3a, /* CCRS=0, BLNVB=58 */ + 0x60, 0x00, /* NULL */ + + /* 0x61 - 0x66 set according to norm */ + + 0x67, 0x00, /* 0 : caption 1st byte odd field */ + 0x68, 0x00, /* 0 : caption 2nd byte odd field */ + 0x69, 0x00, /* 0 : caption 1st byte even field */ + 0x6a, 0x00, /* 0 : caption 2nd byte even field */ + + 0x6b, 0x91, /* MODIN=2, PCREF=0, SCCLN=17 */ + 0x6c, 0x20, /* SRCV1=0, TRCV2=1, ORCV1=0, PRCV1=0, + * CBLF=0, ORCV2=0, PRCV2=0 */ + 0x6d, 0x00, /* SRCM1=0, CCEN=0 */ + + 0x6e, 0x0e, /* HTRIG=0x005, approx. centered, at + * least for PAL */ + 0x6f, 0x00, /* HTRIG upper bits */ + 0x70, 0x20, /* PHRES=0, SBLN=1, VTRIG=0 */ + + /* The following should not be needed */ + + 0x71, 0x15, /* BMRQ=0x115 */ + 0x72, 0x90, /* EMRQ=0x690 */ + 0x73, 0x61, /* EMRQ=0x690, BMRQ=0x115 */ + 0x74, 0x00, /* NULL */ + 0x75, 0x00, /* NULL */ + 0x76, 0x00, /* NULL */ + 0x77, 0x15, /* BRCV=0x115 */ + 0x78, 0x90, /* ERCV=0x690 */ + 0x79, 0x61, /* ERCV=0x690, BRCV=0x115 */ + + /* Field length controls */ + + 0x7a, 0x70, /* FLC=0 */ + + /* The following should not be needed if SBLN = 1 */ + + 0x7b, 0x16, /* FAL=22 */ + 0x7c, 0x35, /* LAL=244 */ + 0x7d, 0x20, /* LAL=244, FAL=22 */ +}; + +static const unsigned char init_pal[] = { + 0x61, 0x1e, /* FISE=0, PAL=1, SCBW=1, RTCE=1, + * YGS=1, INPI=0, DOWN=0 */ + 0x62, 0xc8, /* DECTYP=1, BSTA=72 */ + 0x63, 0xcb, /* FSC0 */ + 0x64, 0x8a, /* FSC1 */ + 0x65, 0x09, /* FSC2 */ + 0x66, 0x2a, /* FSC3 */ +}; + +static const unsigned char init_ntsc[] = { + 0x61, 0x1d, /* FISE=1, PAL=0, SCBW=1, RTCE=1, + * YGS=1, INPI=0, DOWN=0 */ + 0x62, 0xe6, /* DECTYP=1, BSTA=102 */ + 0x63, 0x1f, /* FSC0 */ + 0x64, 0x7c, /* FSC1 */ + 0x65, 0xf0, /* FSC2 */ + 0x66, 0x21, /* FSC3 */ +}; + + +static int saa7185_init(struct v4l2_subdev *sd, u32 val) +{ + struct saa7185 *encoder = to_saa7185(sd); + + saa7185_write_block(sd, init_common, sizeof(init_common)); + if (encoder->norm & V4L2_STD_NTSC) + saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc)); + else + saa7185_write_block(sd, init_pal, sizeof(init_pal)); + return 0; +} + +static int saa7185_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct saa7185 *encoder = to_saa7185(sd); + + if (std & V4L2_STD_NTSC) + saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc)); + else if (std & V4L2_STD_PAL) + saa7185_write_block(sd, init_pal, sizeof(init_pal)); + else + return -EINVAL; + encoder->norm = std; + return 0; +} + +static int saa7185_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7185 *encoder = to_saa7185(sd); + + /* RJ: input = 0: input is from SA7111 + input = 1: input is from ZR36060 */ + + switch (input) { + case 0: + /* turn off colorbar */ + saa7185_write(sd, 0x3a, 0x0f); + /* Switch RTCE to 1 */ + saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08); + saa7185_write(sd, 0x6e, 0x01); + break; + + case 1: + /* turn off colorbar */ + saa7185_write(sd, 0x3a, 0x0f); + /* Switch RTCE to 0 */ + saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x00); + /* SW: a slight sync problem... */ + saa7185_write(sd, 0x6e, 0x00); + break; + + case 2: + /* turn on colorbar */ + saa7185_write(sd, 0x3a, 0x8f); + /* Switch RTCE to 0 */ + saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08); + /* SW: a slight sync problem... */ + saa7185_write(sd, 0x6e, 0x01); + break; + + default: + return -EINVAL; + } + return 0; +} + +static int saa7185_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7185, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa7185_core_ops = { + .g_chip_ident = saa7185_g_chip_ident, + .init = saa7185_init, +}; + +static const struct v4l2_subdev_video_ops saa7185_video_ops = { + .s_std_output = saa7185_s_std_output, + .s_routing = saa7185_s_routing, +}; + +static const struct v4l2_subdev_ops saa7185_ops = { + .core = &saa7185_core_ops, + .video = &saa7185_video_ops, +}; + + +/* ----------------------------------------------------------------------- */ + +static int saa7185_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i; + struct saa7185 *encoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + encoder->norm = V4L2_STD_NTSC; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa7185_ops); + + i = saa7185_write_block(sd, init_common, sizeof(init_common)); + if (i >= 0) + i = saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc)); + if (i < 0) + v4l2_dbg(1, debug, sd, "init error %d\n", i); + else + v4l2_dbg(1, debug, sd, "revision 0x%x\n", + saa7185_read(sd) >> 5); + return 0; +} + +static int saa7185_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa7185 *encoder = to_saa7185(sd); + + v4l2_device_unregister_subdev(sd); + /* SW: output off is active */ + saa7185_write(sd, 0x61, (encoder->reg[0x61]) | 0x40); + kfree(encoder); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id saa7185_id[] = { + { "saa7185", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7185_id); + +static struct i2c_driver saa7185_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7185", + }, + .probe = saa7185_probe, + .remove = saa7185_remove, + .id_table = saa7185_id, +}; + +module_i2c_driver(saa7185_driver); diff --git a/drivers/media/i2c/saa7191.c b/drivers/media/i2c/saa7191.c new file mode 100644 index 000000000000..d7d1670e0ca3 --- /dev/null +++ b/drivers/media/i2c/saa7191.c @@ -0,0 +1,659 @@ +/* + * saa7191.c - Philips SAA7191 video decoder driver + * + * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org> + * Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/slab.h> + +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +#include "saa7191.h" + +#define SAA7191_MODULE_VERSION "0.0.5" + +MODULE_DESCRIPTION("Philips SAA7191 video decoder driver"); +MODULE_VERSION(SAA7191_MODULE_VERSION); +MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>"); +MODULE_LICENSE("GPL"); + + +// #define SAA7191_DEBUG + +#ifdef SAA7191_DEBUG +#define dprintk(x...) printk("SAA7191: " x); +#else +#define dprintk(x...) +#endif + +#define SAA7191_SYNC_COUNT 30 +#define SAA7191_SYNC_DELAY 100 /* milliseconds */ + +struct saa7191 { + struct v4l2_subdev sd; + + /* the register values are stored here as the actual + * I2C-registers are write-only */ + u8 reg[25]; + + int input; + v4l2_std_id norm; +}; + +static inline struct saa7191 *to_saa7191(struct v4l2_subdev *sd) +{ + return container_of(sd, struct saa7191, sd); +} + +static const u8 initseq[] = { + 0, /* Subaddress */ + + 0x50, /* (0x50) SAA7191_REG_IDEL */ + + /* 50 Hz signal timing */ + 0x30, /* (0x30) SAA7191_REG_HSYB */ + 0x00, /* (0x00) SAA7191_REG_HSYS */ + 0xe8, /* (0xe8) SAA7191_REG_HCLB */ + 0xb6, /* (0xb6) SAA7191_REG_HCLS */ + 0xf4, /* (0xf4) SAA7191_REG_HPHI */ + + /* control */ + SAA7191_LUMA_APER_1, /* (0x01) SAA7191_REG_LUMA - CVBS mode */ + 0x00, /* (0x00) SAA7191_REG_HUEC */ + 0xf8, /* (0xf8) SAA7191_REG_CKTQ */ + 0xf8, /* (0xf8) SAA7191_REG_CKTS */ + 0x90, /* (0x90) SAA7191_REG_PLSE */ + 0x90, /* (0x90) SAA7191_REG_SESE */ + 0x00, /* (0x00) SAA7191_REG_GAIN */ + SAA7191_STDC_NFEN | SAA7191_STDC_HRMV, /* (0x0c) SAA7191_REG_STDC + * - not SECAM, + * slow time constant */ + SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS + | SAA7191_IOCK_OEDY, /* (0x78) SAA7191_REG_IOCK + * - chroma from CVBS, GPSW1 & 2 off */ + SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS + | SAA7191_CTL3_YDEL0, /* (0x99) SAA7191_REG_CTL3 + * - automatic field detection */ + 0x00, /* (0x00) SAA7191_REG_CTL4 */ + 0x2c, /* (0x2c) SAA7191_REG_CHCV - PAL nominal value */ + 0x00, /* unused */ + 0x00, /* unused */ + + /* 60 Hz signal timing */ + 0x34, /* (0x34) SAA7191_REG_HS6B */ + 0x0a, /* (0x0a) SAA7191_REG_HS6S */ + 0xf4, /* (0xf4) SAA7191_REG_HC6B */ + 0xce, /* (0xce) SAA7191_REG_HC6S */ + 0xf4, /* (0xf4) SAA7191_REG_HP6I */ +}; + +/* SAA7191 register handling */ + +static u8 saa7191_read_reg(struct v4l2_subdev *sd, u8 reg) +{ + return to_saa7191(sd)->reg[reg]; +} + +static int saa7191_read_status(struct v4l2_subdev *sd, u8 *value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + ret = i2c_master_recv(client, value, 1); + if (ret < 0) { + printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n"); + return ret; + } + + return 0; +} + + +static int saa7191_write_reg(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + to_saa7191(sd)->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* the first byte of data must be the first subaddress number (register) */ +static int saa7191_write_block(struct v4l2_subdev *sd, + u8 length, const u8 *data) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct saa7191 *decoder = to_saa7191(sd); + int i; + int ret; + + for (i = 0; i < (length - 1); i++) { + decoder->reg[data[0] + i] = data[i + 1]; + } + + ret = i2c_master_send(client, data, length); + if (ret < 0) { + printk(KERN_ERR "SAA7191: saa7191_write_block(): " + "write failed\n"); + return ret; + } + + return 0; +} + +/* Helper functions */ + +static int saa7191_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct saa7191 *decoder = to_saa7191(sd); + u8 luma = saa7191_read_reg(sd, SAA7191_REG_LUMA); + u8 iock = saa7191_read_reg(sd, SAA7191_REG_IOCK); + int err; + + switch (input) { + case SAA7191_INPUT_COMPOSITE: /* Set Composite input */ + iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1 + | SAA7191_IOCK_GPSW2); + /* Chrominance trap active */ + luma &= ~SAA7191_LUMA_BYPS; + break; + case SAA7191_INPUT_SVIDEO: /* Set S-Video input */ + iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2; + /* Chrominance trap bypassed */ + luma |= SAA7191_LUMA_BYPS; + break; + default: + return -EINVAL; + } + + err = saa7191_write_reg(sd, SAA7191_REG_LUMA, luma); + if (err) + return -EIO; + err = saa7191_write_reg(sd, SAA7191_REG_IOCK, iock); + if (err) + return -EIO; + + decoder->input = input; + + return 0; +} + +static int saa7191_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct saa7191 *decoder = to_saa7191(sd); + u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC); + u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3); + u8 chcv = saa7191_read_reg(sd, SAA7191_REG_CHCV); + int err; + + if (norm & V4L2_STD_PAL) { + stdc &= ~SAA7191_STDC_SECS; + ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); + chcv = SAA7191_CHCV_PAL; + } else if (norm & V4L2_STD_NTSC) { + stdc &= ~SAA7191_STDC_SECS; + ctl3 &= ~SAA7191_CTL3_AUFD; + ctl3 |= SAA7191_CTL3_FSEL; + chcv = SAA7191_CHCV_NTSC; + } else if (norm & V4L2_STD_SECAM) { + stdc |= SAA7191_STDC_SECS; + ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); + chcv = SAA7191_CHCV_PAL; + } else { + return -EINVAL; + } + + err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); + if (err) + return -EIO; + err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc); + if (err) + return -EIO; + err = saa7191_write_reg(sd, SAA7191_REG_CHCV, chcv); + if (err) + return -EIO; + + decoder->norm = norm; + + dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3, + stdc, chcv); + dprintk("norm: %llx\n", norm); + + return 0; +} + +static int saa7191_wait_for_signal(struct v4l2_subdev *sd, u8 *status) +{ + int i = 0; + + dprintk("Checking for signal...\n"); + + for (i = 0; i < SAA7191_SYNC_COUNT; i++) { + if (saa7191_read_status(sd, status)) + return -EIO; + + if (((*status) & SAA7191_STATUS_HLCK) == 0) { + dprintk("Signal found\n"); + return 0; + } + + msleep(SAA7191_SYNC_DELAY); + } + + dprintk("No signal\n"); + + return -EBUSY; +} + +static int saa7191_querystd(struct v4l2_subdev *sd, v4l2_std_id *norm) +{ + struct saa7191 *decoder = to_saa7191(sd); + u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC); + u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3); + u8 status; + v4l2_std_id old_norm = decoder->norm; + int err = 0; + + dprintk("SAA7191 extended signal auto-detection...\n"); + + *norm = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM; + stdc &= ~SAA7191_STDC_SECS; + ctl3 &= ~(SAA7191_CTL3_FSEL); + + err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc); + if (err) { + err = -EIO; + goto out; + } + err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); + if (err) { + err = -EIO; + goto out; + } + + ctl3 |= SAA7191_CTL3_AUFD; + err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); + if (err) { + err = -EIO; + goto out; + } + + msleep(SAA7191_SYNC_DELAY); + + err = saa7191_wait_for_signal(sd, &status); + if (err) + goto out; + + if (status & SAA7191_STATUS_FIDT) { + /* 60Hz signal -> NTSC */ + dprintk("60Hz signal: NTSC\n"); + *norm = V4L2_STD_NTSC; + return 0; + } + + /* 50Hz signal */ + dprintk("50Hz signal: Trying PAL...\n"); + + /* try PAL first */ + err = saa7191_s_std(sd, V4L2_STD_PAL); + if (err) + goto out; + + msleep(SAA7191_SYNC_DELAY); + + err = saa7191_wait_for_signal(sd, &status); + if (err) + goto out; + + /* not 50Hz ? */ + if (status & SAA7191_STATUS_FIDT) { + dprintk("No 50Hz signal\n"); + saa7191_s_std(sd, old_norm); + return -EAGAIN; + } + + if (status & SAA7191_STATUS_CODE) { + dprintk("PAL\n"); + *norm = V4L2_STD_PAL; + return saa7191_s_std(sd, old_norm); + } + + dprintk("No color detected with PAL - Trying SECAM...\n"); + + /* no color detected ? -> try SECAM */ + err = saa7191_s_std(sd, V4L2_STD_SECAM); + if (err) + goto out; + + msleep(SAA7191_SYNC_DELAY); + + err = saa7191_wait_for_signal(sd, &status); + if (err) + goto out; + + /* not 50Hz ? */ + if (status & SAA7191_STATUS_FIDT) { + dprintk("No 50Hz signal\n"); + err = -EAGAIN; + goto out; + } + + if (status & SAA7191_STATUS_CODE) { + /* Color detected -> SECAM */ + dprintk("SECAM\n"); + *norm = V4L2_STD_SECAM; + return saa7191_s_std(sd, old_norm); + } + + dprintk("No color detected with SECAM - Going back to PAL.\n"); + +out: + return saa7191_s_std(sd, old_norm); +} + +static int saa7191_autodetect_norm(struct v4l2_subdev *sd) +{ + u8 status; + + dprintk("SAA7191 signal auto-detection...\n"); + + dprintk("Reading status...\n"); + + if (saa7191_read_status(sd, &status)) + return -EIO; + + dprintk("Checking for signal...\n"); + + /* no signal ? */ + if (status & SAA7191_STATUS_HLCK) { + dprintk("No signal\n"); + return -EBUSY; + } + + dprintk("Signal found\n"); + + if (status & SAA7191_STATUS_FIDT) { + /* 60hz signal -> NTSC */ + dprintk("NTSC\n"); + return saa7191_s_std(sd, V4L2_STD_NTSC); + } else { + /* 50hz signal -> PAL */ + dprintk("PAL\n"); + return saa7191_s_std(sd, V4L2_STD_PAL); + } +} + +static int saa7191_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + u8 reg; + int ret = 0; + + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + case SAA7191_CONTROL_BANDPASS_WEIGHT: + case SAA7191_CONTROL_CORING: + reg = saa7191_read_reg(sd, SAA7191_REG_LUMA); + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK) + >> SAA7191_LUMA_BPSS_SHIFT; + break; + case SAA7191_CONTROL_BANDPASS_WEIGHT: + ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK) + >> SAA7191_LUMA_APER_SHIFT; + break; + case SAA7191_CONTROL_CORING: + ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK) + >> SAA7191_LUMA_CORI_SHIFT; + break; + } + break; + case SAA7191_CONTROL_FORCE_COLOUR: + case SAA7191_CONTROL_CHROMA_GAIN: + reg = saa7191_read_reg(sd, SAA7191_REG_GAIN); + if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) + ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0; + else + ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK) + >> SAA7191_GAIN_LFIS_SHIFT; + break; + case V4L2_CID_HUE: + reg = saa7191_read_reg(sd, SAA7191_REG_HUEC); + if (reg < 0x80) + reg += 0x80; + else + reg -= 0x80; + ctrl->value = (s32)reg; + break; + case SAA7191_CONTROL_VTRC: + reg = saa7191_read_reg(sd, SAA7191_REG_STDC); + ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0; + break; + case SAA7191_CONTROL_LUMA_DELAY: + reg = saa7191_read_reg(sd, SAA7191_REG_CTL3); + ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK) + >> SAA7191_CTL3_YDEL_SHIFT; + if (ctrl->value >= 4) + ctrl->value -= 8; + break; + case SAA7191_CONTROL_VNR: + reg = saa7191_read_reg(sd, SAA7191_REG_CTL4); + ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK) + >> SAA7191_CTL4_VNOI_SHIFT; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int saa7191_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + u8 reg; + int ret = 0; + + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + case SAA7191_CONTROL_BANDPASS_WEIGHT: + case SAA7191_CONTROL_CORING: + reg = saa7191_read_reg(sd, SAA7191_REG_LUMA); + switch (ctrl->id) { + case SAA7191_CONTROL_BANDPASS: + reg &= ~SAA7191_LUMA_BPSS_MASK; + reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT) + & SAA7191_LUMA_BPSS_MASK; + break; + case SAA7191_CONTROL_BANDPASS_WEIGHT: + reg &= ~SAA7191_LUMA_APER_MASK; + reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT) + & SAA7191_LUMA_APER_MASK; + break; + case SAA7191_CONTROL_CORING: + reg &= ~SAA7191_LUMA_CORI_MASK; + reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT) + & SAA7191_LUMA_CORI_MASK; + break; + } + ret = saa7191_write_reg(sd, SAA7191_REG_LUMA, reg); + break; + case SAA7191_CONTROL_FORCE_COLOUR: + case SAA7191_CONTROL_CHROMA_GAIN: + reg = saa7191_read_reg(sd, SAA7191_REG_GAIN); + if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) { + if (ctrl->value) + reg |= SAA7191_GAIN_COLO; + else + reg &= ~SAA7191_GAIN_COLO; + } else { + reg &= ~SAA7191_GAIN_LFIS_MASK; + reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT) + & SAA7191_GAIN_LFIS_MASK; + } + ret = saa7191_write_reg(sd, SAA7191_REG_GAIN, reg); + break; + case V4L2_CID_HUE: + reg = ctrl->value & 0xff; + if (reg < 0x80) + reg += 0x80; + else + reg -= 0x80; + ret = saa7191_write_reg(sd, SAA7191_REG_HUEC, reg); + break; + case SAA7191_CONTROL_VTRC: + reg = saa7191_read_reg(sd, SAA7191_REG_STDC); + if (ctrl->value) + reg |= SAA7191_STDC_VTRC; + else + reg &= ~SAA7191_STDC_VTRC; + ret = saa7191_write_reg(sd, SAA7191_REG_STDC, reg); + break; + case SAA7191_CONTROL_LUMA_DELAY: { + s32 value = ctrl->value; + if (value < 0) + value += 8; + reg = saa7191_read_reg(sd, SAA7191_REG_CTL3); + reg &= ~SAA7191_CTL3_YDEL_MASK; + reg |= (value << SAA7191_CTL3_YDEL_SHIFT) + & SAA7191_CTL3_YDEL_MASK; + ret = saa7191_write_reg(sd, SAA7191_REG_CTL3, reg); + break; + } + case SAA7191_CONTROL_VNR: + reg = saa7191_read_reg(sd, SAA7191_REG_CTL4); + reg &= ~SAA7191_CTL4_VNOI_MASK; + reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT) + & SAA7191_CTL4_VNOI_MASK; + ret = saa7191_write_reg(sd, SAA7191_REG_CTL4, reg); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +/* I2C-interface */ + +static int saa7191_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + u8 status_reg; + int res = V4L2_IN_ST_NO_SIGNAL; + + if (saa7191_read_status(sd, &status_reg)) + return -EIO; + if ((status_reg & SAA7191_STATUS_HLCK) == 0) + res = 0; + if (!(status_reg & SAA7191_STATUS_CODE)) + res |= V4L2_IN_ST_NO_COLOR; + *status = res; + return 0; +} + + +static int saa7191_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7191, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops saa7191_core_ops = { + .g_chip_ident = saa7191_g_chip_ident, + .g_ctrl = saa7191_g_ctrl, + .s_ctrl = saa7191_s_ctrl, + .s_std = saa7191_s_std, +}; + +static const struct v4l2_subdev_video_ops saa7191_video_ops = { + .s_routing = saa7191_s_routing, + .querystd = saa7191_querystd, + .g_input_status = saa7191_g_input_status, +}; + +static const struct v4l2_subdev_ops saa7191_ops = { + .core = &saa7191_core_ops, + .video = &saa7191_video_ops, +}; + +static int saa7191_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err = 0; + struct saa7191 *decoder; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &saa7191_ops); + + err = saa7191_write_block(sd, sizeof(initseq), initseq); + if (err) { + printk(KERN_ERR "SAA7191 initialization failed\n"); + kfree(decoder); + return err; + } + + printk(KERN_INFO "SAA7191 initialized\n"); + + decoder->input = SAA7191_INPUT_COMPOSITE; + decoder->norm = V4L2_STD_PAL; + + err = saa7191_autodetect_norm(sd); + if (err && (err != -EBUSY)) + printk(KERN_ERR "SAA7191: Signal auto-detection failed\n"); + + return 0; +} + +static int saa7191_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_saa7191(sd)); + return 0; +} + +static const struct i2c_device_id saa7191_id[] = { + { "saa7191", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7191_id); + +static struct i2c_driver saa7191_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "saa7191", + }, + .probe = saa7191_probe, + .remove = saa7191_remove, + .id_table = saa7191_id, +}; + +module_i2c_driver(saa7191_driver); diff --git a/drivers/media/i2c/saa7191.h b/drivers/media/i2c/saa7191.h new file mode 100644 index 000000000000..803c74d6066f --- /dev/null +++ b/drivers/media/i2c/saa7191.h @@ -0,0 +1,245 @@ +/* + * saa7191.h - Philips SAA7191 video decoder driver + * + * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org> + * Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _SAA7191_H_ +#define _SAA7191_H_ + +/* Philips SAA7191 DMSD I2C bus address */ +#define SAA7191_ADDR 0x8a + +/* Register subaddresses. */ +#define SAA7191_REG_IDEL 0x00 +#define SAA7191_REG_HSYB 0x01 +#define SAA7191_REG_HSYS 0x02 +#define SAA7191_REG_HCLB 0x03 +#define SAA7191_REG_HCLS 0x04 +#define SAA7191_REG_HPHI 0x05 +#define SAA7191_REG_LUMA 0x06 +#define SAA7191_REG_HUEC 0x07 +#define SAA7191_REG_CKTQ 0x08 /* bits 3-7 */ +#define SAA7191_REG_CKTS 0x09 /* bits 3-7 */ +#define SAA7191_REG_PLSE 0x0a +#define SAA7191_REG_SESE 0x0b +#define SAA7191_REG_GAIN 0x0c +#define SAA7191_REG_STDC 0x0d +#define SAA7191_REG_IOCK 0x0e +#define SAA7191_REG_CTL3 0x0f +#define SAA7191_REG_CTL4 0x10 +#define SAA7191_REG_CHCV 0x11 +#define SAA7191_REG_HS6B 0x14 +#define SAA7191_REG_HS6S 0x15 +#define SAA7191_REG_HC6B 0x16 +#define SAA7191_REG_HC6S 0x17 +#define SAA7191_REG_HP6I 0x18 +#define SAA7191_REG_STATUS 0xff /* not really a subaddress */ + +/* Status Register definitions */ +#define SAA7191_STATUS_CODE 0x01 /* color detected flag */ +#define SAA7191_STATUS_FIDT 0x20 /* signal type 50/60 Hz */ +#define SAA7191_STATUS_HLCK 0x40 /* PLL unlocked(1)/locked(0) */ +#define SAA7191_STATUS_STTC 0x80 /* tv/vtr time constant */ + +/* Luminance Control Register definitions */ +/* input mode select bit: + * 0=CVBS (chrominance trap active), 1=S-Video (trap bypassed) */ +#define SAA7191_LUMA_BYPS 0x80 +/* pre-filter (only when chrominance trap is active) */ +#define SAA7191_LUMA_PREF 0x40 +/* aperture bandpass to select different characteristics with maximums + * (bits 4-5) */ +#define SAA7191_LUMA_BPSS_MASK 0x30 +#define SAA7191_LUMA_BPSS_SHIFT 4 +#define SAA7191_LUMA_BPSS_3 0x30 +#define SAA7191_LUMA_BPSS_2 0x20 +#define SAA7191_LUMA_BPSS_1 0x10 +#define SAA7191_LUMA_BPSS_0 0x00 +/* coring range for high frequency components according to 8-bit luminance + * (bits 2-3) + * 0=coring off, n= (+-)n LSB */ +#define SAA7191_LUMA_CORI_MASK 0x0c +#define SAA7191_LUMA_CORI_SHIFT 2 +#define SAA7191_LUMA_CORI_3 0x0c +#define SAA7191_LUMA_CORI_2 0x08 +#define SAA7191_LUMA_CORI_1 0x04 +#define SAA7191_LUMA_CORI_0 0x00 +/* aperture bandpass filter weights high frequency components of luminance + * signal (bits 0-1) + * 0=factor 0, 1=0.25, 2=0.5, 3=1 */ +#define SAA7191_LUMA_APER_MASK 0x03 +#define SAA7191_LUMA_APER_SHIFT 0 +#define SAA7191_LUMA_APER_3 0x03 +#define SAA7191_LUMA_APER_2 0x02 +#define SAA7191_LUMA_APER_1 0x01 +#define SAA7191_LUMA_APER_0 0x00 + +/* Chrominance Gain Control Settings Register definitions */ +/* colour on: 0=automatic colour-killer enabled, 1=forced colour on */ +#define SAA7191_GAIN_COLO 0x80 +/* chrominance gain control (AGC filter) + * 0=loop filter time constant slow, 1=medium, 2=fast, 3=actual gain */ +#define SAA7191_GAIN_LFIS_MASK 0x60 +#define SAA7191_GAIN_LFIS_SHIFT 5 +#define SAA7191_GAIN_LFIS_3 0x60 +#define SAA7191_GAIN_LFIS_2 0x40 +#define SAA7191_GAIN_LFIS_1 0x20 +#define SAA7191_GAIN_LFIS_0 0x00 + +/* Standard/Mode Control Register definitions */ +/* tv/vtr mode bit: 0=TV mode (slow time constant), + * 1=VTR mode (fast time constant) */ +#define SAA7191_STDC_VTRC 0x80 +/* SAA7191B-specific functions enable (RTCO, ODD and GPSW0 outputs) + * 0=outputs set to high-impedance (circuit equals SAA7191), 1=enabled */ +#define SAA7191_STDC_NFEN 0x08 +/* HREF generation: 0=like SAA7191, 1=HREF is 8xLLC2 clocks earlier */ +#define SAA7191_STDC_HRMV 0x04 +/* general purpose switch 0 + * (not used with VINO afaik) */ +#define SAA7191_STDC_GPSW0 0x02 +/* SECAM mode bit: 0=other standards, 1=SECAM */ +#define SAA7191_STDC_SECS 0x01 + +/* I/O and Clock Control Register definitions */ +/* horizontal clock PLL: 0=PLL closed, + * 1=PLL circuit open and horizontal freq fixed */ +#define SAA7191_IOCK_HPLL 0x80 +/* colour-difference output enable (outputs UV0-UV7) */ +#define SAA7191_IOCK_OEDC 0x40 +/* H-sync output enable */ +#define SAA7191_IOCK_OEHS 0x20 +/* V-sync output enable */ +#define SAA7191_IOCK_OEVS 0x10 +/* luminance output enable (outputs Y0-Y7) */ +#define SAA7191_IOCK_OEDY 0x08 +/* S-VHS bit (chrominance from CVBS or from chrominance input): + * 0=controlled by BYPS-bit, 1=from chrominance input */ +#define SAA7191_IOCK_CHRS 0x04 +/* general purpose switch 2 + * VINO-specific: 0=used with CVBS, 1=used with S-Video */ +#define SAA7191_IOCK_GPSW2 0x02 +/* general purpose switch 1 */ +/* VINO-specific: 0=always, 1=not used!*/ +#define SAA7191_IOCK_GPSW1 0x01 + +/* Miscellaneous Control #1 Register definitions */ +/* automatic field detection (50/60Hz standard) */ +#define SAA7191_CTL3_AUFD 0x80 +/* field select: (if AUFD=0) + * 0=50Hz (625 lines), 1=60Hz (525 lines) */ +#define SAA7191_CTL3_FSEL 0x40 +/* SECAM cross-colour reduction enable */ +#define SAA7191_CTL3_SXCR 0x20 +/* sync and clamping pulse enable (HCL and HSY outputs) */ +#define SAA7191_CTL3_SCEN 0x10 +/* output format: 0=4:1:1, 1=4:2:2 (4:2:2 for VINO) */ +#define SAA7191_CTL3_OFTS 0x08 +/* luminance delay compensation + * 0=0*2/LLC, 1=+1*2/LLC, 2=+2*2/LLC, 3=+3*2/LLC, + * 4=-4*2/LLC, 5=-3*2/LLC, 6=-2*2/LLC, 7=-1*2/LLC + * step size = 2/LLC = 67.8ns for 50Hz, 81.5ns for 60Hz */ +#define SAA7191_CTL3_YDEL_MASK 0x07 +#define SAA7191_CTL3_YDEL_SHIFT 0 +#define SAA7191_CTL3_YDEL2 0x04 +#define SAA7191_CTL3_YDEL1 0x02 +#define SAA7191_CTL3_YDEL0 0x01 + +/* Miscellaneous Control #2 Register definitions */ +/* select HREF position + * 0=normal, HREF is matched to YUV output port, + * 1=HREF is matched to CVBS input port */ +#define SAA7191_CTL4_HRFS 0x04 +/* vertical noise reduction + * 0=normal, 1=searching window, 2=auto-deflection, 3=reduction bypassed */ +#define SAA7191_CTL4_VNOI_MASK 0x03 +#define SAA7191_CTL4_VNOI_SHIFT 0 +#define SAA7191_CTL4_VNOI_3 0x03 +#define SAA7191_CTL4_VNOI_2 0x02 +#define SAA7191_CTL4_VNOI_1 0x01 +#define SAA7191_CTL4_VNOI_0 0x00 + +/* Chrominance Gain Control Register definitions + * - for QAM-modulated input signals, effects output amplitude + * (SECAM gain fixed) + * (nominal values for UV CCIR level) */ +#define SAA7191_CHCV_NTSC 0x2c +#define SAA7191_CHCV_PAL 0x59 + +/* Driver interface definitions */ +#define SAA7191_INPUT_COMPOSITE 0 +#define SAA7191_INPUT_SVIDEO 1 + +#define SAA7191_NORM_PAL 1 +#define SAA7191_NORM_NTSC 2 +#define SAA7191_NORM_SECAM 3 + +struct saa7191_status { + /* 0=no signal, 1=signal detected */ + int signal; + /* 0=50hz (pal) signal, 1=60hz (ntsc) signal */ + int signal_60hz; + /* 0=no color detected, 1=color detected */ + int color; + + /* current SAA7191_INPUT_ */ + int input; + /* current SAA7191_NORM_ */ + int norm; +}; + +#define SAA7191_BANDPASS_MIN 0x00 +#define SAA7191_BANDPASS_MAX 0x03 +#define SAA7191_BANDPASS_DEFAULT 0x00 + +#define SAA7191_BANDPASS_WEIGHT_MIN 0x00 +#define SAA7191_BANDPASS_WEIGHT_MAX 0x03 +#define SAA7191_BANDPASS_WEIGHT_DEFAULT 0x01 + +#define SAA7191_CORING_MIN 0x00 +#define SAA7191_CORING_MAX 0x03 +#define SAA7191_CORING_DEFAULT 0x00 + +#define SAA7191_HUE_MIN 0x00 +#define SAA7191_HUE_MAX 0xff +#define SAA7191_HUE_DEFAULT 0x80 + +#define SAA7191_VTRC_MIN 0x00 +#define SAA7191_VTRC_MAX 0x01 +#define SAA7191_VTRC_DEFAULT 0x00 + +#define SAA7191_FORCE_COLOUR_MIN 0x00 +#define SAA7191_FORCE_COLOUR_MAX 0x01 +#define SAA7191_FORCE_COLOUR_DEFAULT 0x00 + +#define SAA7191_CHROMA_GAIN_MIN 0x00 +#define SAA7191_CHROMA_GAIN_MAX 0x03 +#define SAA7191_CHROMA_GAIN_DEFAULT 0x00 + +#define SAA7191_LUMA_DELAY_MIN -0x04 +#define SAA7191_LUMA_DELAY_MAX 0x03 +#define SAA7191_LUMA_DELAY_DEFAULT 0x01 + +#define SAA7191_VNR_MIN 0x00 +#define SAA7191_VNR_MAX 0x03 +#define SAA7191_VNR_DEFAULT 0x00 + +#define SAA7191_CONTROL_BANDPASS (V4L2_CID_PRIVATE_BASE + 0) +#define SAA7191_CONTROL_BANDPASS_WEIGHT (V4L2_CID_PRIVATE_BASE + 1) +#define SAA7191_CONTROL_CORING (V4L2_CID_PRIVATE_BASE + 2) +#define SAA7191_CONTROL_FORCE_COLOUR (V4L2_CID_PRIVATE_BASE + 3) +#define SAA7191_CONTROL_CHROMA_GAIN (V4L2_CID_PRIVATE_BASE + 4) +#define SAA7191_CONTROL_VTRC (V4L2_CID_PRIVATE_BASE + 5) +#define SAA7191_CONTROL_LUMA_DELAY (V4L2_CID_PRIVATE_BASE + 6) +#define SAA7191_CONTROL_VNR (V4L2_CID_PRIVATE_BASE + 7) + +#define DECODER_SAA7191_GET_STATUS _IOR('d', 195, struct saa7191_status) +#define DECODER_SAA7191_SET_NORM _IOW('d', 196, int) + +#endif diff --git a/drivers/media/i2c/smiapp-pll.c b/drivers/media/i2c/smiapp-pll.c new file mode 100644 index 000000000000..a577614bd84f --- /dev/null +++ b/drivers/media/i2c/smiapp-pll.c @@ -0,0 +1,418 @@ +/* + * drivers/media/i2c/smiapp-pll.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/gcd.h> +#include <linux/lcm.h> +#include <linux/module.h> + +#include "smiapp-pll.h" + +/* Return an even number or one. */ +static inline uint32_t clk_div_even(uint32_t a) +{ + return max_t(uint32_t, 1, a & ~1); +} + +/* Return an even number or one. */ +static inline uint32_t clk_div_even_up(uint32_t a) +{ + if (a == 1) + return 1; + return (a + 1) & ~1; +} + +static inline uint32_t is_one_or_even(uint32_t a) +{ + if (a == 1) + return 1; + if (a & 1) + return 0; + + return 1; +} + +static int bounds_check(struct device *dev, uint32_t val, + uint32_t min, uint32_t max, char *str) +{ + if (val >= min && val <= max) + return 0; + + dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max); + + return -EINVAL; +} + +static void print_pll(struct device *dev, struct smiapp_pll *pll) +{ + dev_dbg(dev, "pre_pll_clk_div\t%d\n", pll->pre_pll_clk_div); + dev_dbg(dev, "pll_multiplier \t%d\n", pll->pll_multiplier); + if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) { + dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div); + dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div); + } + dev_dbg(dev, "vt_sys_clk_div \t%d\n", pll->vt_sys_clk_div); + dev_dbg(dev, "vt_pix_clk_div \t%d\n", pll->vt_pix_clk_div); + + dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz); + dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz); + dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz); + if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) { + dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n", + pll->op_sys_clk_freq_hz); + dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n", + pll->op_pix_clk_freq_hz); + } + dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz); + dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz); +} + +int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, + struct smiapp_pll *pll) +{ + uint32_t sys_div; + uint32_t best_pix_div = INT_MAX >> 1; + uint32_t vt_op_binning_div; + uint32_t lane_op_clock_ratio; + uint32_t mul, div; + uint32_t more_mul_min, more_mul_max; + uint32_t more_mul_factor; + uint32_t min_vt_div, max_vt_div, vt_div; + uint32_t min_sys_div, max_sys_div; + unsigned int i; + int rval; + + if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE) + lane_op_clock_ratio = pll->lanes; + else + lane_op_clock_ratio = 1; + dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio); + + dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal, + pll->binning_vertical); + + /* CSI transfers 2 bits per clock per lane; thus times 2 */ + pll->pll_op_clk_freq_hz = pll->link_freq * 2 + * (pll->lanes / lane_op_clock_ratio); + + /* Figure out limits for pre-pll divider based on extclk */ + dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n", + limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); + limits->max_pre_pll_clk_div = + min_t(uint16_t, limits->max_pre_pll_clk_div, + clk_div_even(pll->ext_clk_freq_hz / + limits->min_pll_ip_freq_hz)); + limits->min_pre_pll_clk_div = + max_t(uint16_t, limits->min_pre_pll_clk_div, + clk_div_even_up( + DIV_ROUND_UP(pll->ext_clk_freq_hz, + limits->max_pll_ip_freq_hz))); + dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n", + limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); + + i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz); + mul = div_u64(pll->pll_op_clk_freq_hz, i); + div = pll->ext_clk_freq_hz / i; + dev_dbg(dev, "mul %d / div %d\n", mul, div); + + limits->min_pre_pll_clk_div = + max_t(uint16_t, limits->min_pre_pll_clk_div, + clk_div_even_up( + DIV_ROUND_UP(mul * pll->ext_clk_freq_hz, + limits->max_pll_op_freq_hz))); + dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n", + limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div); + + if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) { + dev_err(dev, "unable to compute pre_pll divisor\n"); + return -EINVAL; + } + + pll->pre_pll_clk_div = limits->min_pre_pll_clk_div; + + /* + * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be + * too high. + */ + dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div); + + /* Don't go above max pll multiplier. */ + more_mul_max = limits->max_pll_multiplier / mul; + dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n", + more_mul_max); + /* Don't go above max pll op frequency. */ + more_mul_max = + min_t(int, + more_mul_max, + limits->max_pll_op_freq_hz + / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul)); + dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n", + more_mul_max); + /* Don't go above the division capability of op sys clock divider. */ + more_mul_max = min(more_mul_max, + limits->max_op_sys_clk_div * pll->pre_pll_clk_div + / div); + dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n", + more_mul_max); + /* Ensure we won't go above min_pll_multiplier. */ + more_mul_max = min(more_mul_max, + DIV_ROUND_UP(limits->max_pll_multiplier, mul)); + dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n", + more_mul_max); + + /* Ensure we won't go below min_pll_op_freq_hz. */ + more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz, + pll->ext_clk_freq_hz / pll->pre_pll_clk_div + * mul); + dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n", + more_mul_min); + /* Ensure we won't go below min_pll_multiplier. */ + more_mul_min = max(more_mul_min, + DIV_ROUND_UP(limits->min_pll_multiplier, mul)); + dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n", + more_mul_min); + + if (more_mul_min > more_mul_max) { + dev_warn(dev, + "unable to compute more_mul_min and more_mul_max"); + return -EINVAL; + } + + more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div; + dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor); + more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div); + dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n", + more_mul_factor); + i = roundup(more_mul_min, more_mul_factor); + if (!is_one_or_even(i)) + i <<= 1; + + dev_dbg(dev, "final more_mul: %d\n", i); + if (i > more_mul_max) { + dev_warn(dev, "final more_mul is bad, max %d", more_mul_max); + return -EINVAL; + } + + pll->pll_multiplier = mul * i; + pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div; + dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div); + + pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz + / pll->pre_pll_clk_div; + + pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz + * pll->pll_multiplier; + + /* Derive pll_op_clk_freq_hz. */ + pll->op_sys_clk_freq_hz = + pll->pll_op_clk_freq_hz / pll->op_sys_clk_div; + + pll->op_pix_clk_div = pll->bits_per_pixel; + dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div); + + pll->op_pix_clk_freq_hz = + pll->op_sys_clk_freq_hz / pll->op_pix_clk_div; + + /* + * Some sensors perform analogue binning and some do this + * digitally. The ones doing this digitally can be roughly be + * found out using this formula. The ones doing this digitally + * should run at higher clock rate, so smaller divisor is used + * on video timing side. + */ + if (limits->min_line_length_pck_bin > limits->min_line_length_pck + / pll->binning_horizontal) + vt_op_binning_div = pll->binning_horizontal; + else + vt_op_binning_div = 1; + dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div); + + /* + * Profile 2 supports vt_pix_clk_div E [4, 10] + * + * Horizontal binning can be used as a base for difference in + * divisors. One must make sure that horizontal blanking is + * enough to accommodate the CSI-2 sync codes. + * + * Take scaling factor into account as well. + * + * Find absolute limits for the factor of vt divider. + */ + dev_dbg(dev, "scale_m: %d\n", pll->scale_m); + min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div + * pll->scale_n, + lane_op_clock_ratio * vt_op_binning_div + * pll->scale_m); + + /* Find smallest and biggest allowed vt divisor. */ + dev_dbg(dev, "min_vt_div: %d\n", min_vt_div); + min_vt_div = max(min_vt_div, + DIV_ROUND_UP(pll->pll_op_clk_freq_hz, + limits->max_vt_pix_clk_freq_hz)); + dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n", + min_vt_div); + min_vt_div = max_t(uint32_t, min_vt_div, + limits->min_vt_pix_clk_div + * limits->min_vt_sys_clk_div); + dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div); + + max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div; + dev_dbg(dev, "max_vt_div: %d\n", max_vt_div); + max_vt_div = min(max_vt_div, + DIV_ROUND_UP(pll->pll_op_clk_freq_hz, + limits->min_vt_pix_clk_freq_hz)); + dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n", + max_vt_div); + + /* + * Find limitsits for sys_clk_div. Not all values are possible + * with all values of pix_clk_div. + */ + min_sys_div = limits->min_vt_sys_clk_div; + dev_dbg(dev, "min_sys_div: %d\n", min_sys_div); + min_sys_div = max(min_sys_div, + DIV_ROUND_UP(min_vt_div, + limits->max_vt_pix_clk_div)); + dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div); + min_sys_div = max(min_sys_div, + pll->pll_op_clk_freq_hz + / limits->max_vt_sys_clk_freq_hz); + dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div); + min_sys_div = clk_div_even_up(min_sys_div); + dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div); + + max_sys_div = limits->max_vt_sys_clk_div; + dev_dbg(dev, "max_sys_div: %d\n", max_sys_div); + max_sys_div = min(max_sys_div, + DIV_ROUND_UP(max_vt_div, + limits->min_vt_pix_clk_div)); + dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div); + max_sys_div = min(max_sys_div, + DIV_ROUND_UP(pll->pll_op_clk_freq_hz, + limits->min_vt_pix_clk_freq_hz)); + dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div); + + /* + * Find pix_div such that a legal pix_div * sys_div results + * into a value which is not smaller than div, the desired + * divisor. + */ + for (vt_div = min_vt_div; vt_div <= max_vt_div; + vt_div += 2 - (vt_div & 1)) { + for (sys_div = min_sys_div; + sys_div <= max_sys_div; + sys_div += 2 - (sys_div & 1)) { + int pix_div = DIV_ROUND_UP(vt_div, sys_div); + + if (pix_div < limits->min_vt_pix_clk_div + || pix_div > limits->max_vt_pix_clk_div) { + dev_dbg(dev, + "pix_div %d too small or too big (%d--%d)\n", + pix_div, + limits->min_vt_pix_clk_div, + limits->max_vt_pix_clk_div); + continue; + } + + /* Check if this one is better. */ + if (pix_div * sys_div + <= roundup(min_vt_div, best_pix_div)) + best_pix_div = pix_div; + } + if (best_pix_div < INT_MAX >> 1) + break; + } + + pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div); + pll->vt_pix_clk_div = best_pix_div; + + pll->vt_sys_clk_freq_hz = + pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div; + pll->vt_pix_clk_freq_hz = + pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div; + + pll->pixel_rate_csi = + pll->op_pix_clk_freq_hz * lane_op_clock_ratio; + + print_pll(dev, pll); + + rval = bounds_check(dev, pll->pre_pll_clk_div, + limits->min_pre_pll_clk_div, + limits->max_pre_pll_clk_div, "pre_pll_clk_div"); + if (!rval) + rval = bounds_check( + dev, pll->pll_ip_clk_freq_hz, + limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz, + "pll_ip_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->pll_multiplier, + limits->min_pll_multiplier, limits->max_pll_multiplier, + "pll_multiplier"); + if (!rval) + rval = bounds_check( + dev, pll->pll_op_clk_freq_hz, + limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz, + "pll_op_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->op_sys_clk_div, + limits->min_op_sys_clk_div, limits->max_op_sys_clk_div, + "op_sys_clk_div"); + if (!rval) + rval = bounds_check( + dev, pll->op_pix_clk_div, + limits->min_op_pix_clk_div, limits->max_op_pix_clk_div, + "op_pix_clk_div"); + if (!rval) + rval = bounds_check( + dev, pll->op_sys_clk_freq_hz, + limits->min_op_sys_clk_freq_hz, + limits->max_op_sys_clk_freq_hz, + "op_sys_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->op_pix_clk_freq_hz, + limits->min_op_pix_clk_freq_hz, + limits->max_op_pix_clk_freq_hz, + "op_pix_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->vt_sys_clk_freq_hz, + limits->min_vt_sys_clk_freq_hz, + limits->max_vt_sys_clk_freq_hz, + "vt_sys_clk_freq_hz"); + if (!rval) + rval = bounds_check( + dev, pll->vt_pix_clk_freq_hz, + limits->min_vt_pix_clk_freq_hz, + limits->max_vt_pix_clk_freq_hz, + "vt_pix_clk_freq_hz"); + + return rval; +} +EXPORT_SYMBOL_GPL(smiapp_pll_calculate); + +MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>"); +MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/smiapp-pll.h b/drivers/media/i2c/smiapp-pll.h new file mode 100644 index 000000000000..cb2d2db5d02d --- /dev/null +++ b/drivers/media/i2c/smiapp-pll.h @@ -0,0 +1,103 @@ +/* + * drivers/media/i2c/smiapp-pll.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef SMIAPP_PLL_H +#define SMIAPP_PLL_H + +#include <linux/device.h> + +struct smiapp_pll { + uint8_t lanes; + uint8_t binning_horizontal; + uint8_t binning_vertical; + uint8_t scale_m; + uint8_t scale_n; + uint8_t bits_per_pixel; + uint16_t flags; + uint32_t link_freq; + + uint16_t pre_pll_clk_div; + uint16_t pll_multiplier; + uint16_t op_sys_clk_div; + uint16_t op_pix_clk_div; + uint16_t vt_sys_clk_div; + uint16_t vt_pix_clk_div; + + uint32_t ext_clk_freq_hz; + uint32_t pll_ip_clk_freq_hz; + uint32_t pll_op_clk_freq_hz; + uint32_t op_sys_clk_freq_hz; + uint32_t op_pix_clk_freq_hz; + uint32_t vt_sys_clk_freq_hz; + uint32_t vt_pix_clk_freq_hz; + + uint32_t pixel_rate_csi; +}; + +struct smiapp_pll_limits { + /* Strict PLL limits */ + uint32_t min_ext_clk_freq_hz; + uint32_t max_ext_clk_freq_hz; + uint16_t min_pre_pll_clk_div; + uint16_t max_pre_pll_clk_div; + uint32_t min_pll_ip_freq_hz; + uint32_t max_pll_ip_freq_hz; + uint16_t min_pll_multiplier; + uint16_t max_pll_multiplier; + uint32_t min_pll_op_freq_hz; + uint32_t max_pll_op_freq_hz; + + uint16_t min_vt_sys_clk_div; + uint16_t max_vt_sys_clk_div; + uint32_t min_vt_sys_clk_freq_hz; + uint32_t max_vt_sys_clk_freq_hz; + uint16_t min_vt_pix_clk_div; + uint16_t max_vt_pix_clk_div; + uint32_t min_vt_pix_clk_freq_hz; + uint32_t max_vt_pix_clk_freq_hz; + + uint16_t min_op_sys_clk_div; + uint16_t max_op_sys_clk_div; + uint32_t min_op_sys_clk_freq_hz; + uint32_t max_op_sys_clk_freq_hz; + uint16_t min_op_pix_clk_div; + uint16_t max_op_pix_clk_div; + uint32_t min_op_pix_clk_freq_hz; + uint32_t max_op_pix_clk_freq_hz; + + /* Other relevant limits */ + uint32_t min_line_length_pck_bin; + uint32_t min_line_length_pck; +}; + +/* op pix clock is for all lanes in total normally */ +#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0) +#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS (1 << 1) + +struct device; + +int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits, + struct smiapp_pll *pll); + +#endif /* SMIAPP_PLL_H */ diff --git a/drivers/media/i2c/smiapp/Kconfig b/drivers/media/i2c/smiapp/Kconfig new file mode 100644 index 000000000000..3149cda1d0db --- /dev/null +++ b/drivers/media/i2c/smiapp/Kconfig @@ -0,0 +1,7 @@ +config VIDEO_SMIAPP + tristate "SMIA++/SMIA sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK + depends on MEDIA_CAMERA_SUPPORT + select VIDEO_SMIAPP_PLL + ---help--- + This is a generic driver for SMIA++/SMIA camera modules. diff --git a/drivers/media/i2c/smiapp/Makefile b/drivers/media/i2c/smiapp/Makefile new file mode 100644 index 000000000000..f45a003cbe7e --- /dev/null +++ b/drivers/media/i2c/smiapp/Makefile @@ -0,0 +1,5 @@ +smiapp-objs += smiapp-core.o smiapp-regs.o \ + smiapp-quirk.o smiapp-limits.o +obj-$(CONFIG_VIDEO_SMIAPP) += smiapp.o + +ccflags-y += -Idrivers/media/i2c diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c new file mode 100644 index 000000000000..1cf914d11345 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -0,0 +1,2895 @@ +/* + * drivers/media/i2c/smiapp/smiapp-core.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2010--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * Based on smiapp driver by Vimarsh Zutshi + * Based on jt8ev1.c by Vimarsh Zutshi + * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/v4l2-mediabus.h> +#include <media/v4l2-device.h> + +#include "smiapp.h" + +#define SMIAPP_ALIGN_DIM(dim, flags) \ + ((flags) & V4L2_SEL_FLAG_GE \ + ? ALIGN((dim), 2) \ + : (dim) & ~1) + +/* + * smiapp_module_idents - supported camera modules + */ +static const struct smiapp_module_ident smiapp_module_idents[] = { + SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"), + SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"), + SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"), + SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"), + SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"), + SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk), + SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"), + SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"), + SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk), + SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk), + SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk), +}; + +/* + * + * Dynamic Capability Identification + * + */ + +static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc; + unsigned int i; + int rval; + int line_count = 0; + int embedded_start = -1, embedded_end = -1; + int image_start = 0; + + rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE, + &fmt_model_type); + if (rval) + return rval; + + rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE, + &fmt_model_subtype); + if (rval) + return rval; + + ncol_desc = (fmt_model_subtype + & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK) + >> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT; + nrow_desc = fmt_model_subtype + & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK; + + dev_dbg(&client->dev, "format_model_type %s\n", + fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE + ? "2 byte" : + fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE + ? "4 byte" : "is simply bad"); + + for (i = 0; i < ncol_desc + nrow_desc; i++) { + u32 desc; + u32 pixelcode; + u32 pixels; + char *which; + char *what; + + if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i), + &desc); + if (rval) + return rval; + + pixelcode = + (desc + & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK) + >> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT; + pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK; + } else if (fmt_model_type + == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i), + &desc); + if (rval) + return rval; + + pixelcode = + (desc + & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK) + >> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT; + pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK; + } else { + dev_dbg(&client->dev, + "invalid frame format model type %d\n", + fmt_model_type); + return -EINVAL; + } + + if (i < ncol_desc) + which = "columns"; + else + which = "rows"; + + switch (pixelcode) { + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED: + what = "embedded"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY: + what = "dummy"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK: + what = "black"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK: + what = "dark"; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE: + what = "visible"; + break; + default: + what = "invalid"; + dev_dbg(&client->dev, "pixelcode %d\n", pixelcode); + break; + } + + dev_dbg(&client->dev, "%s pixels: %d %s\n", + what, pixels, which); + + if (i < ncol_desc) + continue; + + /* Handle row descriptors */ + if (pixelcode + == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) { + embedded_start = line_count; + } else { + if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE + || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2) + image_start = line_count; + if (embedded_start != -1 && embedded_end == -1) + embedded_end = line_count; + } + line_count += pixels; + } + + if (embedded_start == -1 || embedded_end == -1) { + embedded_start = 0; + embedded_end = 0; + } + + dev_dbg(&client->dev, "embedded data from lines %d to %d\n", + embedded_start, embedded_end); + dev_dbg(&client->dev, "image data starts at line %d\n", image_start); + + return 0; +} + +static int smiapp_pll_configure(struct smiapp_sensor *sensor) +{ + struct smiapp_pll *pll = &sensor->pll; + int rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div); + if (rval < 0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div); + if (rval < 0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div); + if (rval < 0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier); + if (rval < 0) + return rval; + + /* Lane op clock ratio does not apply here. */ + rval = smiapp_write( + sensor, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS, + DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256)); + if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) + return rval; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div); + if (rval < 0) + return rval; + + return smiapp_write( + sensor, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div); +} + +static int smiapp_pll_update(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct smiapp_pll_limits lim = { + .min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV], + .max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV], + .min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ], + .max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ], + .min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER], + .max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER], + .min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ], + .max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ], + + .min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV], + .max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV], + .min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV], + .max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV], + .min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ], + .max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ], + .min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ], + .max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ], + + .min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV], + .max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV], + .min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV], + .max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV], + .min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ], + .max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ], + .min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ], + .max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ], + + .min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN], + .min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK], + }; + struct smiapp_pll *pll = &sensor->pll; + int rval; + + memset(&sensor->pll, 0, sizeof(sensor->pll)); + + pll->lanes = sensor->platform_data->lanes; + pll->ext_clk_freq_hz = sensor->platform_data->ext_clk; + + if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) { + /* + * Fill in operational clock divisors limits from the + * video timing ones. On profile 0 sensors the + * requirements regarding them are essentially the + * same as on VT ones. + */ + lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div; + lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div; + lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div; + lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div; + lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz; + lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz; + lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz; + lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz; + /* Profile 0 sensors have no separate OP clock branch. */ + pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS; + } + + if (smiapp_needs_quirk(sensor, + SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE)) + pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE; + + pll->binning_horizontal = sensor->binning_horizontal; + pll->binning_vertical = sensor->binning_vertical; + pll->link_freq = + sensor->link_freq->qmenu_int[sensor->link_freq->val]; + pll->scale_m = sensor->scale_m; + pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + pll->bits_per_pixel = sensor->csi_format->compressed; + + rval = smiapp_pll_calculate(&client->dev, &lim, pll); + if (rval < 0) + return rval; + + sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz; + sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi; + + return 0; +} + + +/* + * + * V4L2 Controls handling + * + */ + +static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor) +{ + struct v4l2_ctrl *ctrl = sensor->exposure; + int max; + + max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + + sensor->vblank->val + - sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN]; + + ctrl->maximum = max; + if (ctrl->default_value > max) + ctrl->default_value = max; + if (ctrl->val > max) + ctrl->val = max; + if (ctrl->cur.val > max) + ctrl->cur.val = max; +} + +/* + * Order matters. + * + * 1. Bits-per-pixel, descending. + * 2. Bits-per-pixel compressed, descending. + * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel + * orders must be defined. + */ +static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = { + { V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, }, + { V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, }, + { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, }, + { V4L2_MBUS_FMT_SGRBG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GRBG, }, + { V4L2_MBUS_FMT_SRGGB8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_RGGB, }, + { V4L2_MBUS_FMT_SBGGR8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_BGGR, }, + { V4L2_MBUS_FMT_SGBRG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GBRG, }, +}; + +const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" }; + +#define to_csi_format_idx(fmt) (((unsigned long)(fmt) \ + - (unsigned long)smiapp_csi_data_formats) \ + / sizeof(*smiapp_csi_data_formats)) + +static u32 smiapp_pixel_order(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int flip = 0; + + if (sensor->hflip) { + if (sensor->hflip->val) + flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP; + + if (sensor->vflip->val) + flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP; + } + + flip ^= sensor->hvflip_inv_mask; + + dev_dbg(&client->dev, "flip %d\n", flip); + return sensor->default_pixel_order ^ flip; +} + +static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int csi_format_idx = + to_csi_format_idx(sensor->csi_format) & ~3; + unsigned int internal_csi_format_idx = + to_csi_format_idx(sensor->internal_csi_format) & ~3; + unsigned int pixel_order = smiapp_pixel_order(sensor); + + sensor->mbus_frame_fmts = + sensor->default_mbus_frame_fmts << pixel_order; + sensor->csi_format = + &smiapp_csi_data_formats[csi_format_idx + pixel_order]; + sensor->internal_csi_format = + &smiapp_csi_data_formats[internal_csi_format_idx + + pixel_order]; + + BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order + >= ARRAY_SIZE(smiapp_csi_data_formats)); + BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0); + + dev_dbg(&client->dev, "new pixel order %s\n", + pixel_order_str[pixel_order]); +} + +static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct smiapp_sensor *sensor = + container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler) + ->sensor; + u32 orient = 0; + int exposure; + int rval; + + switch (ctrl->id) { + case V4L2_CID_ANALOGUE_GAIN: + return smiapp_write( + sensor, + SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val); + + case V4L2_CID_EXPOSURE: + return smiapp_write( + sensor, + SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val); + + case V4L2_CID_HFLIP: + case V4L2_CID_VFLIP: + if (sensor->streaming) + return -EBUSY; + + if (sensor->hflip->val) + orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP; + + if (sensor->vflip->val) + orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP; + + orient ^= sensor->hvflip_inv_mask; + rval = smiapp_write(sensor, + SMIAPP_REG_U8_IMAGE_ORIENTATION, + orient); + if (rval < 0) + return rval; + + smiapp_update_mbus_formats(sensor); + + return 0; + + case V4L2_CID_VBLANK: + exposure = sensor->exposure->val; + + __smiapp_update_exposure_limits(sensor); + + if (exposure > sensor->exposure->maximum) { + sensor->exposure->val = + sensor->exposure->maximum; + rval = smiapp_set_ctrl( + sensor->exposure); + if (rval < 0) + return rval; + } + + return smiapp_write( + sensor, SMIAPP_REG_U16_FRAME_LENGTH_LINES, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + + ctrl->val); + + case V4L2_CID_HBLANK: + return smiapp_write( + sensor, SMIAPP_REG_U16_LINE_LENGTH_PCK, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width + + ctrl->val); + + case V4L2_CID_LINK_FREQ: + if (sensor->streaming) + return -EBUSY; + + return smiapp_pll_update(sensor); + + default: + return -EINVAL; + } +} + +static const struct v4l2_ctrl_ops smiapp_ctrl_ops = { + .s_ctrl = smiapp_set_ctrl, +}; + +static int smiapp_init_controls(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int max; + int rval; + + rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7); + if (rval) + return rval; + sensor->pixel_array->ctrl_handler.lock = &sensor->mutex; + + sensor->analog_gain = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_ANALOGUE_GAIN, + sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN], + sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX], + max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U), + sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]); + + /* Exposure limits will be updated soon, use just something here. */ + sensor->exposure = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 0, 1, 0); + + sensor->hflip = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + sensor->vflip = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + + sensor->vblank = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_VBLANK, 0, 1, 1, 0); + + if (sensor->vblank) + sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE; + + sensor->hblank = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_HBLANK, 0, 1, 1, 0); + + if (sensor->hblank) + sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE; + + sensor->pixel_rate_parray = v4l2_ctrl_new_std( + &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, 0, 1, 0); + + if (sensor->pixel_array->ctrl_handler.error) { + dev_err(&client->dev, + "pixel array controls initialization failed (%d)\n", + sensor->pixel_array->ctrl_handler.error); + rval = sensor->pixel_array->ctrl_handler.error; + goto error; + } + + sensor->pixel_array->sd.ctrl_handler = + &sensor->pixel_array->ctrl_handler; + + v4l2_ctrl_cluster(2, &sensor->hflip); + + rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0); + if (rval) + goto error; + sensor->src->ctrl_handler.lock = &sensor->mutex; + + for (max = 0; sensor->platform_data->op_sys_clock[max + 1]; max++); + + sensor->link_freq = v4l2_ctrl_new_int_menu( + &sensor->src->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_LINK_FREQ, max, 0, + sensor->platform_data->op_sys_clock); + + sensor->pixel_rate_csi = v4l2_ctrl_new_std( + &sensor->src->ctrl_handler, &smiapp_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, 0, 1, 0); + + if (sensor->src->ctrl_handler.error) { + dev_err(&client->dev, + "src controls initialization failed (%d)\n", + sensor->src->ctrl_handler.error); + rval = sensor->src->ctrl_handler.error; + goto error; + } + + sensor->src->sd.ctrl_handler = + &sensor->src->ctrl_handler; + + return 0; + +error: + v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler); + v4l2_ctrl_handler_free(&sensor->src->ctrl_handler); + + return rval; +} + +static void smiapp_free_controls(struct smiapp_sensor *sensor) +{ + unsigned int i; + + for (i = 0; i < sensor->ssds_used; i++) + v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler); +} + +static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit, + unsigned int n) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int i; + u32 val; + int rval; + + for (i = 0; i < n; i++) { + rval = smiapp_read( + sensor, smiapp_reg_limits[limit[i]].addr, &val); + if (rval) + return rval; + sensor->limits[limit[i]] = val; + dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n", + smiapp_reg_limits[limit[i]].addr, + smiapp_reg_limits[limit[i]].what, val, val); + } + + return 0; +} + +static int smiapp_get_all_limits(struct smiapp_sensor *sensor) +{ + unsigned int i; + int rval; + + for (i = 0; i < SMIAPP_LIMIT_LAST; i++) { + rval = smiapp_get_limits(sensor, &i, 1); + if (rval < 0) + return rval; + } + + if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0) + smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16); + + return 0; +} + +static int smiapp_get_limits_binning(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + static u32 const limits[] = { + SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN, + SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN, + SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN, + SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN, + SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, + }; + static u32 const limits_replace[] = { + SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES, + SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES, + SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK, + SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK, + SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN, + SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN, + }; + unsigned int i; + int rval; + + if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] == + SMIAPP_BINNING_CAPABILITY_NO) { + for (i = 0; i < ARRAY_SIZE(limits); i++) + sensor->limits[limits[i]] = + sensor->limits[limits_replace[i]]; + + return 0; + } + + rval = smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits)); + if (rval < 0) + return rval; + + /* + * Sanity check whether the binning limits are valid. If not, + * use the non-binning ones. + */ + if (sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] + && sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] + && sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]) + return 0; + + for (i = 0; i < ARRAY_SIZE(limits); i++) { + dev_dbg(&client->dev, + "replace limit 0x%8.8x \"%s\" = %d, 0x%x\n", + smiapp_reg_limits[limits[i]].addr, + smiapp_reg_limits[limits[i]].what, + sensor->limits[limits_replace[i]], + sensor->limits[limits_replace[i]]); + sensor->limits[limits[i]] = + sensor->limits[limits_replace[i]]; + } + + return 0; +} + +static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int type, n; + unsigned int i, pixel_order; + int rval; + + rval = smiapp_read( + sensor, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type); + if (rval) + return rval; + + dev_dbg(&client->dev, "data_format_model_type %d\n", type); + + rval = smiapp_read(sensor, SMIAPP_REG_U8_PIXEL_ORDER, + &pixel_order); + if (rval) + return rval; + + if (pixel_order >= ARRAY_SIZE(pixel_order_str)) { + dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order); + return -EINVAL; + } + + dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order, + pixel_order_str[pixel_order]); + + switch (type) { + case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL: + n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N; + break; + case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED: + n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N; + break; + default: + return -EINVAL; + } + + sensor->default_pixel_order = pixel_order; + sensor->mbus_frame_fmts = 0; + + for (i = 0; i < n; i++) { + unsigned int fmt, j; + + rval = smiapp_read( + sensor, + SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt); + if (rval) + return rval; + + dev_dbg(&client->dev, "bpp %d, compressed %d\n", + fmt >> 8, (u8)fmt); + + for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) { + const struct smiapp_csi_data_format *f = + &smiapp_csi_data_formats[j]; + + if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG) + continue; + + if (f->width != fmt >> 8 || f->compressed != (u8)fmt) + continue; + + dev_dbg(&client->dev, "jolly good! %d\n", j); + + sensor->default_mbus_frame_fmts |= 1 << j; + if (!sensor->csi_format) { + sensor->csi_format = f; + sensor->internal_csi_format = f; + } + } + } + + if (!sensor->csi_format) { + dev_err(&client->dev, "no supported mbus code found\n"); + return -EINVAL; + } + + smiapp_update_mbus_formats(sensor); + + return 0; +} + +static void smiapp_update_blanking(struct smiapp_sensor *sensor) +{ + struct v4l2_ctrl *vblank = sensor->vblank; + struct v4l2_ctrl *hblank = sensor->hblank; + + vblank->minimum = + max_t(int, + sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES], + sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height); + vblank->maximum = + sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height; + + vblank->val = clamp_t(int, vblank->val, + vblank->minimum, vblank->maximum); + vblank->default_value = vblank->minimum; + vblank->val = vblank->val; + vblank->cur.val = vblank->val; + + hblank->minimum = + max_t(int, + sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width, + sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]); + hblank->maximum = + sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] - + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width; + + hblank->val = clamp_t(int, hblank->val, + hblank->minimum, hblank->maximum); + hblank->default_value = hblank->minimum; + hblank->val = hblank->val; + hblank->cur.val = hblank->val; + + __smiapp_update_exposure_limits(sensor); +} + +static int smiapp_update_mode(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int binning_mode; + int rval; + + dev_dbg(&client->dev, "frame size: %dx%d\n", + sensor->src->crop[SMIAPP_PAD_SRC].width, + sensor->src->crop[SMIAPP_PAD_SRC].height); + dev_dbg(&client->dev, "csi format width: %d\n", + sensor->csi_format->width); + + /* Binning has to be set up here; it affects limits */ + if (sensor->binning_horizontal == 1 && + sensor->binning_vertical == 1) { + binning_mode = 0; + } else { + u8 binning_type = + (sensor->binning_horizontal << 4) + | sensor->binning_vertical; + + rval = smiapp_write( + sensor, SMIAPP_REG_U8_BINNING_TYPE, binning_type); + if (rval < 0) + return rval; + + binning_mode = 1; + } + rval = smiapp_write(sensor, SMIAPP_REG_U8_BINNING_MODE, binning_mode); + if (rval < 0) + return rval; + + /* Get updated limits due to binning */ + rval = smiapp_get_limits_binning(sensor); + if (rval < 0) + return rval; + + rval = smiapp_pll_update(sensor); + if (rval < 0) + return rval; + + /* Output from pixel array, including blanking */ + smiapp_update_blanking(sensor); + + dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val); + dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val); + + dev_dbg(&client->dev, "real timeperframe\t100/%d\n", + sensor->pll.vt_pix_clk_freq_hz / + ((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width + + sensor->hblank->val) * + (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + + sensor->vblank->val) / 100)); + + return 0; +} + +/* + * + * SMIA++ NVM handling + * + */ +static int smiapp_read_nvm(struct smiapp_sensor *sensor, + unsigned char *nvm) +{ + u32 i, s, p, np, v; + int rval = 0, rval2; + + np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE; + for (p = 0; p < np; p++) { + rval = smiapp_write( + sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p); + if (rval) + goto out; + + rval = smiapp_write(sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, + SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN | + SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN); + if (rval) + goto out; + + for (i = 0; i < 1000; i++) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s); + + if (rval) + goto out; + + if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY) + break; + + if (--i == 0) { + rval = -ETIMEDOUT; + goto out; + } + + } + + for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) { + rval = smiapp_read( + sensor, + SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i, + &v); + if (rval) + goto out; + + *nvm++ = v; + } + } + +out: + rval2 = smiapp_write(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0); + if (rval < 0) + return rval; + else + return rval2; +} + +/* + * + * SMIA++ CCI address control + * + */ +static int smiapp_change_cci_addr(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + u32 val; + + client->addr = sensor->platform_data->i2c_addr_dfl; + + rval = smiapp_write(sensor, + SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, + sensor->platform_data->i2c_addr_alt << 1); + if (rval) + return rval; + + client->addr = sensor->platform_data->i2c_addr_alt; + + /* verify addr change went ok */ + rval = smiapp_read(sensor, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val); + if (rval) + return rval; + + if (val != sensor->platform_data->i2c_addr_alt << 1) + return -ENODEV; + + return 0; +} + +/* + * + * SMIA++ Mode Control + * + */ +static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor) +{ + struct smiapp_flash_strobe_parms *strobe_setup; + unsigned int ext_freq = sensor->platform_data->ext_clk; + u32 tmp; + u32 strobe_adjustment; + u32 strobe_width_high_rs; + int rval; + + strobe_setup = sensor->platform_data->strobe_setup; + + /* + * How to calculate registers related to strobe length. Please + * do not change, or if you do at least know what you're + * doing. :-) + * + * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25 + * + * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl + * / EXTCLK freq [Hz]) * flash_strobe_adjustment + * + * tFlash_strobe_width_ctrl E N, [1 - 0xffff] + * flash_strobe_adjustment E N, [1 - 0xff] + * + * The formula above is written as below to keep it on one + * line: + * + * l / 10^6 = w / e * a + * + * Let's mark w * a by x: + * + * x = w * a + * + * Thus, we get: + * + * x = l * e / 10^6 + * + * The strobe width must be at least as long as requested, + * thus rounding upwards is needed. + * + * x = (l * e + 10^6 - 1) / 10^6 + * ----------------------------- + * + * Maximum possible accuracy is wanted at all times. Thus keep + * a as small as possible. + * + * Calculate a, assuming maximum w, with rounding upwards: + * + * a = (x + (2^16 - 1) - 1) / (2^16 - 1) + * ------------------------------------- + * + * Thus, we also get w, with that a, with rounding upwards: + * + * w = (x + a - 1) / a + * ------------------- + * + * To get limits: + * + * x E [1, (2^16 - 1) * (2^8 - 1)] + * + * Substituting maximum x to the original formula (with rounding), + * the maximum l is thus + * + * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1 + * + * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e + * -------------------------------------------------- + * + * flash_strobe_length must be clamped between 1 and + * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq. + * + * Then, + * + * flash_strobe_adjustment = ((flash_strobe_length * + * EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1) + * + * tFlash_strobe_width_ctrl = ((flash_strobe_length * + * EXTCLK freq + 10^6 - 1) / 10^6 + + * flash_strobe_adjustment - 1) / flash_strobe_adjustment + */ + tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) - + 1000000 + 1, ext_freq); + strobe_setup->strobe_width_high_us = + clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp); + + tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq + + 1000000 - 1), 1000000ULL); + strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1); + strobe_width_high_rs = (tmp + strobe_adjustment - 1) / + strobe_adjustment; + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_MODE_RS, + strobe_setup->mode); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT, + strobe_adjustment); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL, + strobe_width_high_rs); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL, + strobe_setup->strobe_delay); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_FLASH_STROBE_START_POINT, + strobe_setup->stobe_start_point); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_TRIGGER_RS, + strobe_setup->trigger); + +out: + sensor->platform_data->strobe_setup->trigger = 0; + + return rval; +} + +/* ----------------------------------------------------------------------------- + * Power management + */ + +static int smiapp_power_on(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int sleep; + int rval; + + rval = regulator_enable(sensor->vana); + if (rval) { + dev_err(&client->dev, "failed to enable vana regulator\n"); + return rval; + } + usleep_range(1000, 1000); + + if (sensor->platform_data->set_xclk) + rval = sensor->platform_data->set_xclk( + &sensor->src->sd, sensor->platform_data->ext_clk); + else + rval = clk_enable(sensor->ext_clk); + if (rval < 0) { + dev_dbg(&client->dev, "failed to set xclk\n"); + goto out_xclk_fail; + } + usleep_range(1000, 1000); + + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 1); + + sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk); + usleep_range(sleep, sleep); + + /* + * Failures to respond to the address change command have been noticed. + * Those failures seem to be caused by the sensor requiring a longer + * boot time than advertised. An additional 10ms delay seems to work + * around the issue, but the SMIA++ I2C write retry hack makes the delay + * unnecessary. The failures need to be investigated to find a proper + * fix, and a delay will likely need to be added here if the I2C write + * retry hack is reverted before the root cause of the boot time issue + * is found. + */ + + if (sensor->platform_data->i2c_addr_alt) { + rval = smiapp_change_cci_addr(sensor); + if (rval) { + dev_err(&client->dev, "cci address change error\n"); + goto out_cci_addr_fail; + } + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_SOFTWARE_RESET, + SMIAPP_SOFTWARE_RESET); + if (rval < 0) { + dev_err(&client->dev, "software reset failed\n"); + goto out_cci_addr_fail; + } + + if (sensor->platform_data->i2c_addr_alt) { + rval = smiapp_change_cci_addr(sensor); + if (rval) { + dev_err(&client->dev, "cci address change error\n"); + goto out_cci_addr_fail; + } + } + + rval = smiapp_write(sensor, SMIAPP_REG_U16_COMPRESSION_MODE, + SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR); + if (rval) { + dev_err(&client->dev, "compression mode set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ, + sensor->platform_data->ext_clk / (1000000 / (1 << 8))); + if (rval) { + dev_err(&client->dev, "extclk frequency set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_LANE_MODE, + sensor->platform_data->lanes - 1); + if (rval) { + dev_err(&client->dev, "csi lane mode set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_FAST_STANDBY_CTRL, + SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE); + if (rval) { + dev_err(&client->dev, "fast standby set failed\n"); + goto out_cci_addr_fail; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_SIGNALLING_MODE, + sensor->platform_data->csi_signalling_mode); + if (rval) { + dev_err(&client->dev, "csi signalling mode set failed\n"); + goto out_cci_addr_fail; + } + + /* DPHY control done by sensor based on requested link rate */ + rval = smiapp_write(sensor, SMIAPP_REG_U8_DPHY_CTRL, + SMIAPP_DPHY_CTRL_UI); + if (rval < 0) + return rval; + + rval = smiapp_call_quirk(sensor, post_poweron); + if (rval) { + dev_err(&client->dev, "post_poweron quirks failed\n"); + goto out_cci_addr_fail; + } + + /* Are we still initialising...? If yes, return here. */ + if (!sensor->pixel_array) + return 0; + + rval = v4l2_ctrl_handler_setup( + &sensor->pixel_array->ctrl_handler); + if (rval) + goto out_cci_addr_fail; + + rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler); + if (rval) + goto out_cci_addr_fail; + + mutex_lock(&sensor->mutex); + rval = smiapp_update_mode(sensor); + mutex_unlock(&sensor->mutex); + if (rval < 0) + goto out_cci_addr_fail; + + return 0; + +out_cci_addr_fail: + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 0); + if (sensor->platform_data->set_xclk) + sensor->platform_data->set_xclk(&sensor->src->sd, 0); + else + clk_disable(sensor->ext_clk); + +out_xclk_fail: + regulator_disable(sensor->vana); + return rval; +} + +static void smiapp_power_off(struct smiapp_sensor *sensor) +{ + /* + * Currently power/clock to lens are enable/disabled separately + * but they are essentially the same signals. So if the sensor is + * powered off while the lens is powered on the sensor does not + * really see a power off and next time the cci address change + * will fail. So do a soft reset explicitly here. + */ + if (sensor->platform_data->i2c_addr_alt) + smiapp_write(sensor, + SMIAPP_REG_U8_SOFTWARE_RESET, + SMIAPP_SOFTWARE_RESET); + + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 0); + if (sensor->platform_data->set_xclk) + sensor->platform_data->set_xclk(&sensor->src->sd, 0); + else + clk_disable(sensor->ext_clk); + usleep_range(5000, 5000); + regulator_disable(sensor->vana); + sensor->streaming = 0; +} + +static int smiapp_set_power(struct v4l2_subdev *subdev, int on) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int ret = 0; + + mutex_lock(&sensor->power_mutex); + + /* + * If the power count is modified from 0 to != 0 or from != 0 + * to 0, update the power state. + */ + if (!sensor->power_count == !on) + goto out; + + if (on) { + /* Power on and perform initialisation. */ + ret = smiapp_power_on(sensor); + if (ret < 0) + goto out; + } else { + smiapp_power_off(sensor); + } + + /* Update the power count. */ + sensor->power_count += on ? 1 : -1; + WARN_ON(sensor->power_count < 0); + +out: + mutex_unlock(&sensor->power_mutex); + return ret; +} + +/* ----------------------------------------------------------------------------- + * Video stream management + */ + +static int smiapp_start_streaming(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + mutex_lock(&sensor->mutex); + + rval = smiapp_write(sensor, SMIAPP_REG_U16_CSI_DATA_FORMAT, + (sensor->csi_format->width << 8) | + sensor->csi_format->compressed); + if (rval) + goto out; + + rval = smiapp_pll_configure(sensor); + if (rval) + goto out; + + /* Analog crop start coordinates */ + rval = smiapp_write(sensor, SMIAPP_REG_U16_X_ADDR_START, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_ADDR_START, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top); + if (rval < 0) + goto out; + + /* Analog crop end coordinates */ + rval = smiapp_write( + sensor, SMIAPP_REG_U16_X_ADDR_END, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left + + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_Y_ADDR_END, + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top + + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1); + if (rval < 0) + goto out; + + /* + * Output from pixel array, including blanking, is set using + * controls below. No need to set here. + */ + + /* Digital crop */ + if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET, + sensor->scaler->crop[SMIAPP_PAD_SINK].left); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET, + sensor->scaler->crop[SMIAPP_PAD_SINK].top); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH, + sensor->scaler->crop[SMIAPP_PAD_SINK].width); + if (rval < 0) + goto out; + + rval = smiapp_write( + sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT, + sensor->scaler->crop[SMIAPP_PAD_SINK].height); + if (rval < 0) + goto out; + } + + /* Scaling */ + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) { + rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALING_MODE, + sensor->scaling_mode); + if (rval < 0) + goto out; + + rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALE_M, + sensor->scale_m); + if (rval < 0) + goto out; + } + + /* Output size from sensor */ + rval = smiapp_write(sensor, SMIAPP_REG_U16_X_OUTPUT_SIZE, + sensor->src->crop[SMIAPP_PAD_SRC].width); + if (rval < 0) + goto out; + rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_OUTPUT_SIZE, + sensor->src->crop[SMIAPP_PAD_SRC].height); + if (rval < 0) + goto out; + + if ((sensor->flash_capability & + (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE | + SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) && + sensor->platform_data->strobe_setup != NULL && + sensor->platform_data->strobe_setup->trigger != 0) { + rval = smiapp_setup_flash_strobe(sensor); + if (rval) + goto out; + } + + rval = smiapp_call_quirk(sensor, pre_streamon); + if (rval) { + dev_err(&client->dev, "pre_streamon quirks failed\n"); + goto out; + } + + rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT, + SMIAPP_MODE_SELECT_STREAMING); + +out: + mutex_unlock(&sensor->mutex); + + return rval; +} + +static int smiapp_stop_streaming(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + mutex_lock(&sensor->mutex); + rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT, + SMIAPP_MODE_SELECT_SOFTWARE_STANDBY); + if (rval) + goto out; + + rval = smiapp_call_quirk(sensor, post_streamoff); + if (rval) + dev_err(&client->dev, "post_streamoff quirks failed\n"); + +out: + mutex_unlock(&sensor->mutex); + return rval; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev video operations + */ + +static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + if (sensor->streaming == enable) + return 0; + + if (enable) { + sensor->streaming = 1; + rval = smiapp_start_streaming(sensor); + if (rval < 0) + sensor->streaming = 0; + } else { + rval = smiapp_stop_streaming(sensor); + sensor->streaming = 0; + } + + return rval; +} + +static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; + int idx = -1; + int rval = -EINVAL; + + mutex_lock(&sensor->mutex); + + dev_err(&client->dev, "subdev %s, pad %d, index %d\n", + subdev->name, code->pad, code->index); + + if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) { + if (code->index) + goto out; + + code->code = sensor->internal_csi_format->code; + rval = 0; + goto out; + } + + for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { + if (sensor->mbus_frame_fmts & (1 << i)) + idx++; + + if (idx == code->index) { + code->code = smiapp_csi_data_formats[i].code; + dev_err(&client->dev, "found index %d, i %d, code %x\n", + code->index, i, code->code); + rval = 0; + break; + } + } + +out: + mutex_unlock(&sensor->mutex); + + return rval; +} + +static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev, + unsigned int pad) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + + if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC) + return sensor->csi_format->code; + else + return sensor->internal_csi_format->code; +} + +static int __smiapp_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad); + } else { + struct v4l2_rect *r; + + if (fmt->pad == ssd->source_pad) + r = &ssd->crop[ssd->source_pad]; + else + r = &ssd->sink_fmt; + + fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad); + fmt->format.width = r->width; + fmt->format.height = r->height; + } + + return 0; +} + +static int smiapp_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + mutex_lock(&sensor->mutex); + rval = __smiapp_get_format(subdev, fh, fmt); + mutex_unlock(&sensor->mutex); + + return rval; +} + +static void smiapp_get_crop_compose(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_rect **crops, + struct v4l2_rect **comps, int which) +{ + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + unsigned int i; + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { + if (crops) + for (i = 0; i < subdev->entity.num_pads; i++) + crops[i] = &ssd->crop[i]; + if (comps) + *comps = &ssd->compose; + } else { + if (crops) { + for (i = 0; i < subdev->entity.num_pads; i++) { + crops[i] = v4l2_subdev_get_try_crop(fh, i); + BUG_ON(!crops[i]); + } + } + if (comps) { + *comps = v4l2_subdev_get_try_compose(fh, + SMIAPP_PAD_SINK); + BUG_ON(!*comps); + } + } +} + +/* Changes require propagation only on sink pad. */ +static void smiapp_propagate(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, int which, + int target) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *comp, *crops[SMIAPP_PADS]; + + smiapp_get_crop_compose(subdev, fh, crops, &comp, which); + + switch (target) { + case V4L2_SEL_TGT_CROP: + comp->width = crops[SMIAPP_PAD_SINK]->width; + comp->height = crops[SMIAPP_PAD_SINK]->height; + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { + if (ssd == sensor->scaler) { + sensor->scale_m = + sensor->limits[ + SMIAPP_LIMIT_SCALER_N_MIN]; + sensor->scaling_mode = + SMIAPP_SCALING_MODE_NONE; + } else if (ssd == sensor->binner) { + sensor->binning_horizontal = 1; + sensor->binning_vertical = 1; + } + } + /* Fall through */ + case V4L2_SEL_TGT_COMPOSE: + *crops[SMIAPP_PAD_SRC] = *comp; + break; + default: + BUG(); + } +} + +static const struct smiapp_csi_data_format +*smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code) +{ + const struct smiapp_csi_data_format *csi_format = sensor->csi_format; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { + if (sensor->mbus_frame_fmts & (1 << i) + && smiapp_csi_data_formats[i].code == code) + return &smiapp_csi_data_formats[i]; + } + + return csi_format; +} + +static int smiapp_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *crops[SMIAPP_PADS]; + + mutex_lock(&sensor->mutex); + + /* + * Media bus code is changeable on src subdev's source pad. On + * other source pads we just get format here. + */ + if (fmt->pad == ssd->source_pad) { + u32 code = fmt->format.code; + int rval = __smiapp_get_format(subdev, fh, fmt); + + if (!rval && subdev == &sensor->src->sd) { + const struct smiapp_csi_data_format *csi_format = + smiapp_validate_csi_data_format(sensor, code); + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + sensor->csi_format = csi_format; + fmt->format.code = csi_format->code; + } + + mutex_unlock(&sensor->mutex); + return rval; + } + + /* Sink pad. Width and height are changeable here. */ + fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad); + fmt->format.width &= ~1; + fmt->format.height &= ~1; + + fmt->format.width = + clamp(fmt->format.width, + sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE], + sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]); + fmt->format.height = + clamp(fmt->format.height, + sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE], + sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]); + + smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which); + + crops[ssd->sink_pad]->left = 0; + crops[ssd->sink_pad]->top = 0; + crops[ssd->sink_pad]->width = fmt->format.width; + crops[ssd->sink_pad]->height = fmt->format.height; + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ssd->sink_fmt = *crops[ssd->sink_pad]; + smiapp_propagate(subdev, fh, fmt->which, + V4L2_SEL_TGT_CROP); + + mutex_unlock(&sensor->mutex); + + return 0; +} + +/* + * Calculate goodness of scaled image size compared to expected image + * size and flags provided. + */ +#define SCALING_GOODNESS 100000 +#define SCALING_GOODNESS_EXTREME 100000000 +static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w, + int h, int ask_h, u32 flags) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + int val = 0; + + w &= ~1; + ask_w &= ~1; + h &= ~1; + ask_h &= ~1; + + if (flags & V4L2_SEL_FLAG_GE) { + if (w < ask_w) + val -= SCALING_GOODNESS; + if (h < ask_h) + val -= SCALING_GOODNESS; + } + + if (flags & V4L2_SEL_FLAG_LE) { + if (w > ask_w) + val -= SCALING_GOODNESS; + if (h > ask_h) + val -= SCALING_GOODNESS; + } + + val -= abs(w - ask_w); + val -= abs(h - ask_h); + + if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE]) + val -= SCALING_GOODNESS_EXTREME; + + dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n", + w, ask_h, h, ask_h, val); + + return val; +} + +static void smiapp_set_compose_binner(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel, + struct v4l2_rect **crops, + struct v4l2_rect *comp) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; + unsigned int binh = 1, binv = 1; + unsigned int best = scaling_goodness( + subdev, + crops[SMIAPP_PAD_SINK]->width, sel->r.width, + crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags); + + for (i = 0; i < sensor->nbinning_subtypes; i++) { + int this = scaling_goodness( + subdev, + crops[SMIAPP_PAD_SINK]->width + / sensor->binning_subtypes[i].horizontal, + sel->r.width, + crops[SMIAPP_PAD_SINK]->height + / sensor->binning_subtypes[i].vertical, + sel->r.height, sel->flags); + + if (this > best) { + binh = sensor->binning_subtypes[i].horizontal; + binv = sensor->binning_subtypes[i].vertical; + best = this; + } + } + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sensor->binning_vertical = binv; + sensor->binning_horizontal = binh; + } + + sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1; + sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1; +} + +/* + * Calculate best scaling ratio and mode for given output resolution. + * + * Try all of these: horizontal ratio, vertical ratio and smallest + * size possible (horizontally). + * + * Also try whether horizontal scaler or full scaler gives a better + * result. + */ +static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel, + struct v4l2_rect **crops, + struct v4l2_rect *comp) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + u32 min, max, a, b, max_m; + u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + int mode = SMIAPP_SCALING_MODE_HORIZONTAL; + u32 try[4]; + u32 ntry = 0; + unsigned int i; + int best = INT_MIN; + + sel->r.width = min_t(unsigned int, sel->r.width, + crops[SMIAPP_PAD_SINK]->width); + sel->r.height = min_t(unsigned int, sel->r.height, + crops[SMIAPP_PAD_SINK]->height); + + a = crops[SMIAPP_PAD_SINK]->width + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width; + b = crops[SMIAPP_PAD_SINK]->height + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height; + max_m = crops[SMIAPP_PAD_SINK]->width + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] + / sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE]; + + a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX], + max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN])); + b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX], + max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN])); + max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX], + max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN])); + + dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m); + + min = min(max_m, min(a, b)); + max = min(max_m, max(a, b)); + + try[ntry] = min; + ntry++; + if (min != max) { + try[ntry] = max; + ntry++; + } + if (max != max_m) { + try[ntry] = min + 1; + ntry++; + if (min != max) { + try[ntry] = max + 1; + ntry++; + } + } + + for (i = 0; i < ntry; i++) { + int this = scaling_goodness( + subdev, + crops[SMIAPP_PAD_SINK]->width + / try[i] + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN], + sel->r.width, + crops[SMIAPP_PAD_SINK]->height, + sel->r.height, + sel->flags); + + dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i); + + if (this > best) { + scale_m = try[i]; + mode = SMIAPP_SCALING_MODE_HORIZONTAL; + best = this; + } + + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) + continue; + + this = scaling_goodness( + subdev, crops[SMIAPP_PAD_SINK]->width + / try[i] + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN], + sel->r.width, + crops[SMIAPP_PAD_SINK]->height + / try[i] + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN], + sel->r.height, + sel->flags); + + if (this > best) { + scale_m = try[i]; + mode = SMIAPP_SCALING_MODE_BOTH; + best = this; + } + } + + sel->r.width = + (crops[SMIAPP_PAD_SINK]->width + / scale_m + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1; + if (mode == SMIAPP_SCALING_MODE_BOTH) + sel->r.height = + (crops[SMIAPP_PAD_SINK]->height + / scale_m + * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) + & ~1; + else + sel->r.height = crops[SMIAPP_PAD_SINK]->height; + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sensor->scale_m = scale_m; + sensor->scaling_mode = mode; + } +} +/* We're only called on source pads. This function sets scaling. */ +static int smiapp_set_compose(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *comp, *crops[SMIAPP_PADS]; + + smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which); + + sel->r.top = 0; + sel->r.left = 0; + + if (ssd == sensor->binner) + smiapp_set_compose_binner(subdev, fh, sel, crops, comp); + else + smiapp_set_compose_scaler(subdev, fh, sel, crops, comp); + + *comp = sel->r; + smiapp_propagate(subdev, fh, sel->which, + V4L2_SEL_TGT_COMPOSE); + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) + return smiapp_update_mode(sensor); + + return 0; +} + +static int __smiapp_sel_supported(struct v4l2_subdev *subdev, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + + /* We only implement crop in three places. */ + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + case V4L2_SEL_TGT_CROP_BOUNDS: + if (ssd == sensor->pixel_array + && sel->pad == SMIAPP_PA_PAD_SRC) + return 0; + if (ssd == sensor->src + && sel->pad == SMIAPP_PAD_SRC) + return 0; + if (ssd == sensor->scaler + && sel->pad == SMIAPP_PAD_SINK + && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) + return 0; + return -EINVAL; + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + if (sel->pad == ssd->source_pad) + return -EINVAL; + if (ssd == sensor->binner) + return 0; + if (ssd == sensor->scaler + && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) + return 0; + /* Fall through */ + default: + return -EINVAL; + } +} + +static int smiapp_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *src_size, *crops[SMIAPP_PADS]; + struct v4l2_rect _r; + + smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which); + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + if (sel->pad == ssd->sink_pad) + src_size = &ssd->sink_fmt; + else + src_size = &ssd->compose; + } else { + if (sel->pad == ssd->sink_pad) { + _r.left = 0; + _r.top = 0; + _r.width = v4l2_subdev_get_try_format(fh, sel->pad) + ->width; + _r.height = v4l2_subdev_get_try_format(fh, sel->pad) + ->height; + src_size = &_r; + } else { + src_size = + v4l2_subdev_get_try_compose( + fh, ssd->sink_pad); + } + } + + if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) { + sel->r.left = 0; + sel->r.top = 0; + } + + sel->r.width = min(sel->r.width, src_size->width); + sel->r.height = min(sel->r.height, src_size->height); + + sel->r.left = min(sel->r.left, src_size->width - sel->r.width); + sel->r.top = min(sel->r.top, src_size->height - sel->r.height); + + *crops[sel->pad] = sel->r; + + if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK) + smiapp_propagate(subdev, fh, sel->which, + V4L2_SEL_TGT_CROP); + + return 0; +} + +static int __smiapp_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct v4l2_rect *comp, *crops[SMIAPP_PADS]; + struct v4l2_rect sink_fmt; + int ret; + + ret = __smiapp_sel_supported(subdev, sel); + if (ret) + return ret; + + smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which); + + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + sink_fmt = ssd->sink_fmt; + } else { + struct v4l2_mbus_framefmt *fmt = + v4l2_subdev_get_try_format(fh, ssd->sink_pad); + + sink_fmt.left = 0; + sink_fmt.top = 0; + sink_fmt.width = fmt->width; + sink_fmt.height = fmt->height; + } + + switch (sel->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + if (ssd == sensor->pixel_array) { + sel->r.width = + sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + sel->r.height = + sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; + } else if (sel->pad == ssd->sink_pad) { + sel->r = sink_fmt; + } else { + sel->r = *comp; + } + break; + case V4L2_SEL_TGT_CROP: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + sel->r = *crops[sel->pad]; + break; + case V4L2_SEL_TGT_COMPOSE: + sel->r = *comp; + break; + } + + return 0; +} + +static int smiapp_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + mutex_lock(&sensor->mutex); + rval = __smiapp_get_selection(subdev, fh, sel); + mutex_unlock(&sensor->mutex); + + return rval; +} +static int smiapp_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int ret; + + ret = __smiapp_sel_supported(subdev, sel); + if (ret) + return ret; + + mutex_lock(&sensor->mutex); + + sel->r.left = max(0, sel->r.left & ~1); + sel->r.top = max(0, sel->r.top & ~1); + sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags)); + sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags)); + + sel->r.width = max_t(unsigned int, + sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE], + sel->r.width); + sel->r.height = max_t(unsigned int, + sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE], + sel->r.height); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + ret = smiapp_set_crop(subdev, fh, sel); + break; + case V4L2_SEL_TGT_COMPOSE: + ret = smiapp_set_compose(subdev, fh, sel); + break; + default: + BUG(); + } + + mutex_unlock(&sensor->mutex); + return ret; +} + +static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + + *frames = sensor->frame_skip; + return 0; +} + +/* ----------------------------------------------------------------------------- + * sysfs attributes + */ + +static ssize_t +smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int nbytes; + + if (!sensor->dev_init_done) + return -EBUSY; + + if (!sensor->nvm_size) { + /* NVM not read yet - read it now */ + sensor->nvm_size = sensor->platform_data->nvm_size; + if (smiapp_set_power(subdev, 1) < 0) + return -ENODEV; + if (smiapp_read_nvm(sensor, sensor->nvm)) { + dev_err(&client->dev, "nvm read failed\n"); + return -ENODEV; + } + smiapp_set_power(subdev, 0); + } + /* + * NVM is still way below a PAGE_SIZE, so we can safely + * assume this for now. + */ + nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE); + memcpy(buf, sensor->nvm, nbytes); + + return nbytes; +} +static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL); + +/* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int smiapp_identify_module(struct v4l2_subdev *subdev) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_module_info *minfo = &sensor->minfo; + unsigned int i; + int rval = 0; + + minfo->name = SMIAPP_NAME; + + /* Module info */ + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MANUFACTURER_ID, + &minfo->manufacturer_id); + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U16_MODEL_ID, + &minfo->model_id); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_REVISION_NUMBER_MAJOR, + &minfo->revision_number_major); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_REVISION_NUMBER_MINOR, + &minfo->revision_number_minor); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_MODULE_DATE_YEAR, + &minfo->module_year); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_MODULE_DATE_MONTH, + &minfo->module_month); + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MODULE_DATE_DAY, + &minfo->module_day); + + /* Sensor info */ + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID, + &minfo->sensor_manufacturer_id); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U16_SENSOR_MODEL_ID, + &minfo->sensor_model_id); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_SENSOR_REVISION_NUMBER, + &minfo->sensor_revision_number); + if (!rval) + rval = smiapp_read_8only(sensor, + SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION, + &minfo->sensor_firmware_version); + + /* SMIA */ + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIA_VERSION, + &minfo->smia_version); + if (!rval) + rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIAPP_VERSION, + &minfo->smiapp_version); + + if (rval) { + dev_err(&client->dev, "sensor detection failed\n"); + return -ENODEV; + } + + dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n", + minfo->manufacturer_id, minfo->model_id); + + dev_dbg(&client->dev, + "module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n", + minfo->revision_number_major, minfo->revision_number_minor, + minfo->module_year, minfo->module_month, minfo->module_day); + + dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n", + minfo->sensor_manufacturer_id, minfo->sensor_model_id); + + dev_dbg(&client->dev, + "sensor revision 0x%2.2x firmware version 0x%2.2x\n", + minfo->sensor_revision_number, minfo->sensor_firmware_version); + + dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n", + minfo->smia_version, minfo->smiapp_version); + + /* + * Some modules have bad data in the lvalues below. Hope the + * rvalues have better stuff. The lvalues are module + * parameters whereas the rvalues are sensor parameters. + */ + if (!minfo->manufacturer_id && !minfo->model_id) { + minfo->manufacturer_id = minfo->sensor_manufacturer_id; + minfo->model_id = minfo->sensor_model_id; + minfo->revision_number_major = minfo->sensor_revision_number; + } + + for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) { + if (smiapp_module_idents[i].manufacturer_id + != minfo->manufacturer_id) + continue; + if (smiapp_module_idents[i].model_id != minfo->model_id) + continue; + if (smiapp_module_idents[i].flags + & SMIAPP_MODULE_IDENT_FLAG_REV_LE) { + if (smiapp_module_idents[i].revision_number_major + < minfo->revision_number_major) + continue; + } else { + if (smiapp_module_idents[i].revision_number_major + != minfo->revision_number_major) + continue; + } + + minfo->name = smiapp_module_idents[i].name; + minfo->quirk = smiapp_module_idents[i].quirk; + break; + } + + if (i >= ARRAY_SIZE(smiapp_module_idents)) + dev_warn(&client->dev, + "no quirks for this module; let's hope it's fully compliant\n"); + + dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n", + minfo->name, minfo->manufacturer_id, minfo->model_id, + minfo->revision_number_major); + + strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name)); + + return 0; +} + +static const struct v4l2_subdev_ops smiapp_ops; +static const struct v4l2_subdev_internal_ops smiapp_internal_ops; +static const struct media_entity_operations smiapp_entity_ops; + +static int smiapp_registered(struct v4l2_subdev *subdev) +{ + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct smiapp_subdev *last = NULL; + u32 tmp; + unsigned int i; + int rval; + + sensor->vana = regulator_get(&client->dev, "VANA"); + if (IS_ERR(sensor->vana)) { + dev_err(&client->dev, "could not get regulator for vana\n"); + return -ENODEV; + } + + if (!sensor->platform_data->set_xclk) { + sensor->ext_clk = clk_get(&client->dev, + sensor->platform_data->ext_clk_name); + if (IS_ERR(sensor->ext_clk)) { + dev_err(&client->dev, "could not get clock %s\n", + sensor->platform_data->ext_clk_name); + rval = -ENODEV; + goto out_clk_get; + } + + rval = clk_set_rate(sensor->ext_clk, + sensor->platform_data->ext_clk); + if (rval < 0) { + dev_err(&client->dev, + "unable to set clock %s freq to %u\n", + sensor->platform_data->ext_clk_name, + sensor->platform_data->ext_clk); + rval = -ENODEV; + goto out_clk_set_rate; + } + } + + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) { + if (gpio_request_one(sensor->platform_data->xshutdown, 0, + "SMIA++ xshutdown") != 0) { + dev_err(&client->dev, + "unable to acquire reset gpio %d\n", + sensor->platform_data->xshutdown); + rval = -ENODEV; + goto out_clk_set_rate; + } + } + + rval = smiapp_power_on(sensor); + if (rval) { + rval = -ENODEV; + goto out_smiapp_power_on; + } + + rval = smiapp_identify_module(subdev); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + rval = smiapp_get_all_limits(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + /* + * Handle Sensor Module orientation on the board. + * + * The application of H-FLIP and V-FLIP on the sensor is modified by + * the sensor orientation on the board. + * + * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set + * both H-FLIP and V-FLIP for normal operation which also implies + * that a set/unset operation for user space HFLIP and VFLIP v4l2 + * controls will need to be internally inverted. + * + * Rotation also changes the bayer pattern. + */ + if (sensor->platform_data->module_board_orient == + SMIAPP_MODULE_BOARD_ORIENT_180) + sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP | + SMIAPP_IMAGE_ORIENTATION_VFLIP; + + rval = smiapp_get_mbus_formats(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) { + u32 val; + + rval = smiapp_read(sensor, + SMIAPP_REG_U8_BINNING_SUBTYPES, &val); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + sensor->nbinning_subtypes = min_t(u8, val, + SMIAPP_BINNING_SUBTYPES); + + for (i = 0; i < sensor->nbinning_subtypes; i++) { + rval = smiapp_read( + sensor, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + sensor->binning_subtypes[i] = + *(struct smiapp_binning_subtype *)&val; + + dev_dbg(&client->dev, "binning %xx%x\n", + sensor->binning_subtypes[i].horizontal, + sensor->binning_subtypes[i].vertical); + } + } + sensor->binning_horizontal = 1; + sensor->binning_vertical = 1; + + /* SMIA++ NVM initialization - it will be read from the sensor + * when it is first requested by userspace. + */ + if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) { + sensor->nvm = kzalloc(sensor->platform_data->nvm_size, + GFP_KERNEL); + if (sensor->nvm == NULL) { + dev_err(&client->dev, "nvm buf allocation failed\n"); + rval = -ENOMEM; + goto out_power_off; + } + + if (device_create_file(&client->dev, &dev_attr_nvm) != 0) { + dev_err(&client->dev, "sysfs nvm entry failed\n"); + rval = -EBUSY; + goto out_power_off; + } + } + + rval = smiapp_call_quirk(sensor, limits); + if (rval) { + dev_err(&client->dev, "limits quirks failed\n"); + goto out_nvm_release; + } + + /* We consider this as profile 0 sensor if any of these are zero. */ + if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) { + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0; + } else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) { + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1; + else + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2; + sensor->scaler = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + } else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { + sensor->scaler = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + } + sensor->binner = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + sensor->pixel_array = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + + sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + + for (i = 0; i < SMIAPP_SUBDEVS; i++) { + struct { + struct smiapp_subdev *ssd; + char *name; + } const __this[] = { + { sensor->scaler, "scaler", }, + { sensor->binner, "binner", }, + { sensor->pixel_array, "pixel array", }, + }, *_this = &__this[i]; + struct smiapp_subdev *this = _this->ssd; + + if (!this) + continue; + + if (this != sensor->src) + v4l2_subdev_init(&this->sd, &smiapp_ops); + + this->sensor = sensor; + + if (this == sensor->pixel_array) { + this->npads = 1; + } else { + this->npads = 2; + this->source_pad = 1; + } + + snprintf(this->sd.name, + sizeof(this->sd.name), "%s %s", + sensor->minfo.name, _this->name); + + this->sink_fmt.width = + sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + this->sink_fmt.height = + sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; + this->compose.width = this->sink_fmt.width; + this->compose.height = this->sink_fmt.height; + this->crop[this->source_pad] = this->compose; + this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE; + if (this != sensor->pixel_array) { + this->crop[this->sink_pad] = this->compose; + this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK; + } + + this->sd.entity.ops = &smiapp_entity_ops; + + if (last == NULL) { + last = this; + continue; + } + + this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + this->sd.internal_ops = &smiapp_internal_ops; + this->sd.owner = NULL; + v4l2_set_subdevdata(&this->sd, client); + + rval = media_entity_init(&this->sd.entity, + this->npads, this->pads, 0); + if (rval) { + dev_err(&client->dev, + "media_entity_init failed\n"); + goto out_nvm_release; + } + + rval = media_entity_create_link(&this->sd.entity, + this->source_pad, + &last->sd.entity, + last->sink_pad, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (rval) { + dev_err(&client->dev, + "media_entity_create_link failed\n"); + goto out_nvm_release; + } + + rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev, + &this->sd); + if (rval) { + dev_err(&client->dev, + "v4l2_device_register_subdev failed\n"); + goto out_nvm_release; + } + + last = this; + } + + dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile); + + sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + + /* final steps */ + smiapp_read_frame_fmt(sensor); + rval = smiapp_init_controls(sensor); + if (rval < 0) + goto out_nvm_release; + + rval = smiapp_update_mode(sensor); + if (rval) { + dev_err(&client->dev, "update mode failed\n"); + goto out_nvm_release; + } + + sensor->streaming = false; + sensor->dev_init_done = true; + + /* check flash capability */ + rval = smiapp_read(sensor, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp); + sensor->flash_capability = tmp; + if (rval) + goto out_nvm_release; + + smiapp_power_off(sensor); + + return 0; + +out_nvm_release: + device_remove_file(&client->dev, &dev_attr_nvm); + +out_power_off: + kfree(sensor->nvm); + sensor->nvm = NULL; + smiapp_power_off(sensor); + +out_smiapp_power_on: + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_free(sensor->platform_data->xshutdown); + +out_clk_set_rate: + clk_put(sensor->ext_clk); + sensor->ext_clk = NULL; + +out_clk_get: + regulator_put(sensor->vana); + sensor->vana = NULL; + return rval; +} + +static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct smiapp_subdev *ssd = to_smiapp_subdev(sd); + struct smiapp_sensor *sensor = ssd->sensor; + u32 mbus_code = + smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code; + unsigned int i; + + mutex_lock(&sensor->mutex); + + for (i = 0; i < ssd->npads; i++) { + struct v4l2_mbus_framefmt *try_fmt = + v4l2_subdev_get_try_format(fh, i); + struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i); + struct v4l2_rect *try_comp; + + try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; + try_fmt->code = mbus_code; + + try_crop->top = 0; + try_crop->left = 0; + try_crop->width = try_fmt->width; + try_crop->height = try_fmt->height; + + if (ssd != sensor->pixel_array) + continue; + + try_comp = v4l2_subdev_get_try_compose(fh, i); + *try_comp = *try_crop; + } + + mutex_unlock(&sensor->mutex); + + return smiapp_set_power(sd, 1); +} + +static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return smiapp_set_power(sd, 0); +} + +static const struct v4l2_subdev_video_ops smiapp_video_ops = { + .s_stream = smiapp_set_stream, +}; + +static const struct v4l2_subdev_core_ops smiapp_core_ops = { + .s_power = smiapp_set_power, +}; + +static const struct v4l2_subdev_pad_ops smiapp_pad_ops = { + .enum_mbus_code = smiapp_enum_mbus_code, + .get_fmt = smiapp_get_format, + .set_fmt = smiapp_set_format, + .get_selection = smiapp_get_selection, + .set_selection = smiapp_set_selection, +}; + +static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = { + .g_skip_frames = smiapp_get_skip_frames, +}; + +static const struct v4l2_subdev_ops smiapp_ops = { + .core = &smiapp_core_ops, + .video = &smiapp_video_ops, + .pad = &smiapp_pad_ops, + .sensor = &smiapp_sensor_ops, +}; + +static const struct media_entity_operations smiapp_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = { + .registered = smiapp_registered, + .open = smiapp_open, + .close = smiapp_close, +}; + +static const struct v4l2_subdev_internal_ops smiapp_internal_ops = { + .open = smiapp_open, + .close = smiapp_close, +}; + +/* ----------------------------------------------------------------------------- + * I2C Driver + */ + +#ifdef CONFIG_PM + +static int smiapp_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + bool streaming; + + BUG_ON(mutex_is_locked(&sensor->mutex)); + + if (sensor->power_count == 0) + return 0; + + if (sensor->streaming) + smiapp_stop_streaming(sensor); + + streaming = sensor->streaming; + + smiapp_power_off(sensor); + + /* save state for resume */ + sensor->streaming = streaming; + + return 0; +} + +static int smiapp_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + int rval; + + if (sensor->power_count == 0) + return 0; + + rval = smiapp_power_on(sensor); + if (rval) + return rval; + + if (sensor->streaming) + rval = smiapp_start_streaming(sensor); + + return rval; +} + +#else + +#define smiapp_suspend NULL +#define smiapp_resume NULL + +#endif /* CONFIG_PM */ + +static int smiapp_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct smiapp_sensor *sensor; + int rval; + + if (client->dev.platform_data == NULL) + return -ENODEV; + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) + return -ENOMEM; + + sensor->platform_data = client->dev.platform_data; + mutex_init(&sensor->mutex); + mutex_init(&sensor->power_mutex); + sensor->src = &sensor->ssds[sensor->ssds_used]; + + v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops); + sensor->src->sd.internal_ops = &smiapp_internal_src_ops; + sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sensor->src->sensor = sensor; + + sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE; + rval = media_entity_init(&sensor->src->sd.entity, 2, + sensor->src->pads, 0); + if (rval < 0) + kfree(sensor); + + return rval; +} + +static int __exit smiapp_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; + + if (sensor->power_count) { + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_set_value(sensor->platform_data->xshutdown, 0); + if (sensor->platform_data->set_xclk) + sensor->platform_data->set_xclk(&sensor->src->sd, 0); + else + clk_disable(sensor->ext_clk); + sensor->power_count = 0; + } + + if (sensor->nvm) { + device_remove_file(&client->dev, &dev_attr_nvm); + kfree(sensor->nvm); + } + + for (i = 0; i < sensor->ssds_used; i++) { + media_entity_cleanup(&sensor->ssds[i].sd.entity); + v4l2_device_unregister_subdev(&sensor->ssds[i].sd); + } + smiapp_free_controls(sensor); + if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) + gpio_free(sensor->platform_data->xshutdown); + if (sensor->ext_clk) + clk_put(sensor->ext_clk); + if (sensor->vana) + regulator_put(sensor->vana); + + kfree(sensor); + + return 0; +} + +static const struct i2c_device_id smiapp_id_table[] = { + { SMIAPP_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, smiapp_id_table); + +static const struct dev_pm_ops smiapp_pm_ops = { + .suspend = smiapp_suspend, + .resume = smiapp_resume, +}; + +static struct i2c_driver smiapp_i2c_driver = { + .driver = { + .name = SMIAPP_NAME, + .pm = &smiapp_pm_ops, + }, + .probe = smiapp_probe, + .remove = __exit_p(smiapp_remove), + .id_table = smiapp_id_table, +}; + +module_i2c_driver(smiapp_i2c_driver); + +MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>"); +MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/smiapp/smiapp-limits.c b/drivers/media/i2c/smiapp/smiapp-limits.c new file mode 100644 index 000000000000..fb2f81ad8c3b --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-limits.c @@ -0,0 +1,132 @@ +/* + * drivers/media/i2c/smiapp/smiapp-limits.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "smiapp.h" + +struct smiapp_reg_limits smiapp_reg_limits[] = { + { SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */ + { SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" }, + { SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" }, + { SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" }, + { SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" }, + { SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */ + { SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" }, + { SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" }, + { SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */ + { SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" }, + { SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" }, + { SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" }, + { SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" }, + { SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */ + { SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" }, + { SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" }, + { SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" }, + { SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" }, + { SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */ + { SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" }, + { SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" }, + { SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" }, + { SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" }, + { SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */ + { SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" }, + { SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" }, + { SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" }, + { SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" }, + { SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */ + { SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" }, + { SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" }, + { SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" }, + { SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" }, + { SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */ + { SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" }, + { SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" }, + { SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" }, + { SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" }, + { SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */ + { SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" }, + { SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" }, + { SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" }, + { SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" }, + { SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */ + { SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" }, + { SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" }, + { SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" }, + { SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" }, + { SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */ + { SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" }, + { SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" }, + { SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" }, + { SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" }, + { SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */ + { SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" }, + { SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" }, + { SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" }, + { SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" }, + { SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */ + { SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" }, + { SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" }, + { SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" }, + { SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" }, + { SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */ + { SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" }, + { SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" }, + { SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" }, + { SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" }, + { SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */ + { SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" }, + { SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */ + { SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" }, + { SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" }, + { SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" }, + { SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" }, + { SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */ + { SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" }, + { SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" }, + { SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" }, + { SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */ + { SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" }, + { SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" }, + { SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" }, + { SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" }, + { SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */ + { SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" }, + { SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" }, + { SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" }, + { SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" }, + { SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */ + { SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" }, + { SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" }, + { SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" }, + { SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" }, + { SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */ + { SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" }, + { SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" }, + { 0, NULL }, +}; diff --git a/drivers/media/i2c/smiapp/smiapp-limits.h b/drivers/media/i2c/smiapp/smiapp-limits.h new file mode 100644 index 000000000000..9ae765e23ea5 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-limits.h @@ -0,0 +1,128 @@ +/* + * drivers/media/i2c/smiapp/smiapp-limits.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY 0 +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN 1 +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX 2 +#define SMIAPP_LIMIT_THS_ZERO_MIN 3 +#define SMIAPP_LIMIT_TCLK_TRAIL_MIN 4 +#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY 5 +#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN 6 +#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN 7 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN 8 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN 9 +#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY 10 +#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN 11 +#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX 12 +#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ 13 +#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ 14 +#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV 15 +#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV 16 +#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ 17 +#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ 18 +#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER 19 +#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER 20 +#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ 21 +#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ 22 +#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV 23 +#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV 24 +#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ 25 +#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ 26 +#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ 27 +#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ 28 +#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV 29 +#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV 30 +#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES 31 +#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES 32 +#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK 33 +#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK 34 +#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK 35 +#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES 36 +#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE 37 +#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV 38 +#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV 39 +#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ 40 +#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ 41 +#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV 42 +#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV 43 +#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ 44 +#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ 45 +#define SMIAPP_LIMIT_X_ADDR_MIN 46 +#define SMIAPP_LIMIT_Y_ADDR_MIN 47 +#define SMIAPP_LIMIT_X_ADDR_MAX 48 +#define SMIAPP_LIMIT_Y_ADDR_MAX 49 +#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE 50 +#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE 51 +#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE 52 +#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE 53 +#define SMIAPP_LIMIT_MIN_EVEN_INC 54 +#define SMIAPP_LIMIT_MAX_EVEN_INC 55 +#define SMIAPP_LIMIT_MIN_ODD_INC 56 +#define SMIAPP_LIMIT_MAX_ODD_INC 57 +#define SMIAPP_LIMIT_SCALING_CAPABILITY 58 +#define SMIAPP_LIMIT_SCALER_M_MIN 59 +#define SMIAPP_LIMIT_SCALER_M_MAX 60 +#define SMIAPP_LIMIT_SCALER_N_MIN 61 +#define SMIAPP_LIMIT_SCALER_N_MAX 62 +#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY 63 +#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY 64 +#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY 65 +#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY 66 +#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY 67 +#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY 68 +#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY 69 +#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY 70 +#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY 71 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS 72 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS 73 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS 74 +#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS 75 +#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY 76 +#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN 77 +#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN 78 +#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN 79 +#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN 80 +#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN 81 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN 82 +#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN 83 +#define SMIAPP_LIMIT_BINNING_CAPABILITY 84 +#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY 85 +#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY 86 +#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY 87 +#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY 88 +#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY 89 +#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY 90 +#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY 91 +#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2 92 +#define SMIAPP_LIMIT_EDOF_CAPABILITY 93 +#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY 94 +#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY 95 +#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY 96 +#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN 97 +#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY 98 +#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY 99 +#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1 100 +#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2 101 +#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP 102 +#define SMIAPP_LIMIT_LAST 103 diff --git a/drivers/media/i2c/smiapp/smiapp-quirk.c b/drivers/media/i2c/smiapp/smiapp-quirk.c new file mode 100644 index 000000000000..cf048128367c --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-quirk.c @@ -0,0 +1,306 @@ +/* + * drivers/media/i2c/smiapp/smiapp-quirk.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/delay.h> + +#include "smiapp.h" + +static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val) +{ + return smiapp_write(sensor, (SMIA_REG_8BIT << 16) | reg, val); +} + +static int smiapp_write_8s(struct smiapp_sensor *sensor, + struct smiapp_reg_8 *regs, int len) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + for (; len > 0; len--, regs++) { + rval = smiapp_write_8(sensor, regs->reg, regs->val); + if (rval < 0) { + dev_err(&client->dev, + "error %d writing reg 0x%4.4x, val 0x%2.2x", + rval, regs->reg, regs->val); + return rval; + } + } + + return 0; +} + +void smiapp_replace_limit(struct smiapp_sensor *sensor, + u32 limit, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + + dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n", + smiapp_reg_limits[limit].addr, + smiapp_reg_limits[limit].what, val, val); + sensor->limits[limit] = val; +} + +int smiapp_replace_limit_at(struct smiapp_sensor *sensor, + u32 reg, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int i; + + for (i = 0; smiapp_reg_limits[i].addr; i++) { + if ((smiapp_reg_limits[i].addr & 0xffff) != reg) + continue; + + smiapp_replace_limit(sensor, i, val); + + return 0; + } + + dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg); + + return -EINVAL; +} + +bool smiapp_quirk_reg(struct smiapp_sensor *sensor, + u32 reg, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + const struct smia_reg *sreg; + + if (!sensor->minfo.quirk) + return false; + + sreg = sensor->minfo.quirk->regs; + + if (!sreg) + return false; + + while (sreg->type) { + u16 type = reg >> 16; + u16 reg16 = reg; + + if (sreg->type != type || sreg->reg != reg16) { + sreg++; + continue; + } + + switch ((u8)type) { + case SMIA_REG_8BIT: + dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%2.2x\n", + reg, sreg->val); + break; + case SMIA_REG_16BIT: + dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%4.4x\n", + reg, sreg->val); + break; + case SMIA_REG_32BIT: + dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%8.8x\n", + reg, sreg->val); + break; + } + + *val = sreg->val; + + return true; + } + + return false; +} + +static int jt8ew9_limits(struct smiapp_sensor *sensor) +{ + if (sensor->minfo.revision_number_major < 0x03) + sensor->frame_skip = 1; + + /* Below 24 gain doesn't have effect at all, */ + /* but ~59 is needed for full dynamic range */ + smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59); + smiapp_replace_limit( + sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000); + + return 0; +} + +static int jt8ew9_post_poweron(struct smiapp_sensor *sensor) +{ + struct smiapp_reg_8 regs[] = { + { 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */ + { 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */ + { 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */ + { 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */ + { 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */ + { 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */ + { 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */ + { 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */ + { 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */ + { 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */ + { 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */ + { 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */ + { 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */ + { 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */ + { 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */ + /* Taken from v03. No idea what the rest are. */ + { 0x32e0, 0x05 }, + { 0x32e1, 0x05 }, + { 0x32e2, 0x04 }, + { 0x32e5, 0x04 }, + { 0x32e6, 0x04 }, + + }; + + return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs)); +} + +const struct smiapp_quirk smiapp_jt8ew9_quirk = { + .limits = jt8ew9_limits, + .post_poweron = jt8ew9_post_poweron, +}; + +static int imx125es_post_poweron(struct smiapp_sensor *sensor) +{ + /* Taken from v02. No idea what the other two are. */ + struct smiapp_reg_8 regs[] = { + /* + * 0x3302: clk during frame blanking: + * 0x00 - HS mode, 0x01 - LP11 + */ + { 0x3302, 0x01 }, + { 0x302d, 0x00 }, + { 0x3b08, 0x8c }, + }; + + return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs)); +} + +const struct smiapp_quirk smiapp_imx125es_quirk = { + .post_poweron = imx125es_post_poweron, +}; + +static int jt8ev1_limits(struct smiapp_sensor *sensor) +{ + smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271); + smiapp_replace_limit(sensor, + SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184); + + return 0; +} + +static int jt8ev1_post_poweron(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + int rval; + + struct smiapp_reg_8 regs[] = { + { 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */ + { 0x30a3, 0xd0 }, /* FLASH STROBE enable */ + { 0x3237, 0x00 }, /* For control of pulse timing for ADC */ + { 0x3238, 0x43 }, + { 0x3301, 0x06 }, /* For analog bias for sensor */ + { 0x3302, 0x06 }, + { 0x3304, 0x00 }, + { 0x3305, 0x88 }, + { 0x332a, 0x14 }, + { 0x332c, 0x6b }, + { 0x3336, 0x01 }, + { 0x333f, 0x1f }, + { 0x3355, 0x00 }, + { 0x3356, 0x20 }, + { 0x33bf, 0x20 }, /* Adjust the FBC speed */ + { 0x33c9, 0x20 }, + { 0x33ce, 0x30 }, /* Adjust the parameter for logic function */ + { 0x33cf, 0xec }, /* For Black sun */ + { 0x3328, 0x80 }, /* Ugh. No idea what's this. */ + }; + + struct smiapp_reg_8 regs_96[] = { + { 0x30ae, 0x00 }, /* For control of ADC clock */ + { 0x30af, 0xd0 }, + { 0x30b0, 0x01 }, + }; + + rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs)); + if (rval < 0) + return rval; + + switch (sensor->platform_data->ext_clk) { + case 9600000: + return smiapp_write_8s(sensor, regs_96, + ARRAY_SIZE(regs_96)); + default: + dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n", + sensor->platform_data->ext_clk); + return 0; + } +} + +static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor) +{ + return smiapp_write_8(sensor, 0x3328, 0x00); +} + +static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor) +{ + int rval; + + /* Workaround: allows fast standby to work properly */ + rval = smiapp_write_8(sensor, 0x3205, 0x04); + if (rval < 0) + return rval; + + /* Wait for 1 ms + one line => 2 ms is likely enough */ + usleep_range(2000, 2000); + + /* Restore it */ + rval = smiapp_write_8(sensor, 0x3205, 0x00); + if (rval < 0) + return rval; + + return smiapp_write_8(sensor, 0x3328, 0x80); +} + +const struct smiapp_quirk smiapp_jt8ev1_quirk = { + .limits = jt8ev1_limits, + .post_poweron = jt8ev1_post_poweron, + .pre_streamon = jt8ev1_pre_streamon, + .post_streamoff = jt8ev1_post_streamoff, + .flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE, +}; + +static int tcm8500md_limits(struct smiapp_sensor *sensor) +{ + smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000); + + return 0; +} + +const struct smiapp_quirk smiapp_tcm8500md_quirk = { + .limits = tcm8500md_limits, +}; diff --git a/drivers/media/i2c/smiapp/smiapp-quirk.h b/drivers/media/i2c/smiapp/smiapp-quirk.h new file mode 100644 index 000000000000..86fd3e8bfb0f --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-quirk.h @@ -0,0 +1,83 @@ +/* + * drivers/media/i2c/smiapp/smiapp-quirk.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_QUIRK__ +#define __SMIAPP_QUIRK__ + +struct smiapp_sensor; + +/** + * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard + * + * @limits: Replace sensor->limits with values which can't be read from + * sensor registers. Called the first time the sensor is powered up. + * @post_poweron: Called always after the sensor has been fully powered on. + * @pre_streamon: Called just before streaming is enabled. + * @post_streamon: Called right after stopping streaming. + */ +struct smiapp_quirk { + int (*limits)(struct smiapp_sensor *sensor); + int (*post_poweron)(struct smiapp_sensor *sensor); + int (*pre_streamon)(struct smiapp_sensor *sensor); + int (*post_streamoff)(struct smiapp_sensor *sensor); + const struct smia_reg *regs; + unsigned long flags; +}; + +/* op pix clock is for all lanes in total normally */ +#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0) +#define SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY (1 << 1) + +struct smiapp_reg_8 { + u16 reg; + u8 val; +}; + +void smiapp_replace_limit(struct smiapp_sensor *sensor, + u32 limit, u32 val); +bool smiapp_quirk_reg(struct smiapp_sensor *sensor, + u32 reg, u32 *val); + +#define SMIAPP_MK_QUIRK_REG(_reg, _val) \ + { \ + .type = (_reg >> 16), \ + .reg = (u16)_reg, \ + .val = _val, \ + } + +#define smiapp_call_quirk(_sensor, _quirk, ...) \ + (_sensor->minfo.quirk && \ + _sensor->minfo.quirk->_quirk ? \ + _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0) + +#define smiapp_needs_quirk(_sensor, _quirk) \ + (_sensor->minfo.quirk ? \ + _sensor->minfo.quirk->flags & _quirk : 0) + +extern const struct smiapp_quirk smiapp_jt8ev1_quirk; +extern const struct smiapp_quirk smiapp_imx125es_quirk; +extern const struct smiapp_quirk smiapp_jt8ew9_quirk; +extern const struct smiapp_quirk smiapp_tcm8500md_quirk; + +#endif /* __SMIAPP_QUIRK__ */ diff --git a/drivers/media/i2c/smiapp/smiapp-reg-defs.h b/drivers/media/i2c/smiapp/smiapp-reg-defs.h new file mode 100644 index 000000000000..defa7c5adebf --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-reg-defs.h @@ -0,0 +1,503 @@ +/* + * drivers/media/i2c/smiapp/smiapp-reg-defs.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r)) +#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r)) +#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r)) + +#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r)) + +#define SMIAPP_REG_U16_MODEL_ID SMIAPP_REG_MK_U16(0x0000) +#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR SMIAPP_REG_MK_U8(0x0002) +#define SMIAPP_REG_U8_MANUFACTURER_ID SMIAPP_REG_MK_U8(0x0003) +#define SMIAPP_REG_U8_SMIA_VERSION SMIAPP_REG_MK_U8(0x0004) +#define SMIAPP_REG_U8_FRAME_COUNT SMIAPP_REG_MK_U8(0x0005) +#define SMIAPP_REG_U8_PIXEL_ORDER SMIAPP_REG_MK_U8(0x0006) +#define SMIAPP_REG_U16_DATA_PEDESTAL SMIAPP_REG_MK_U16(0x0008) +#define SMIAPP_REG_U8_PIXEL_DEPTH SMIAPP_REG_MK_U8(0x000c) +#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR SMIAPP_REG_MK_U8(0x0010) +#define SMIAPP_REG_U8_SMIAPP_VERSION SMIAPP_REG_MK_U8(0x0011) +#define SMIAPP_REG_U8_MODULE_DATE_YEAR SMIAPP_REG_MK_U8(0x0012) +#define SMIAPP_REG_U8_MODULE_DATE_MONTH SMIAPP_REG_MK_U8(0x0013) +#define SMIAPP_REG_U8_MODULE_DATE_DAY SMIAPP_REG_MK_U8(0x0014) +#define SMIAPP_REG_U8_MODULE_DATE_PHASE SMIAPP_REG_MK_U8(0x0015) +#define SMIAPP_REG_U16_SENSOR_MODEL_ID SMIAPP_REG_MK_U16(0x0016) +#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER SMIAPP_REG_MK_U8(0x0018) +#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID SMIAPP_REG_MK_U8(0x0019) +#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION SMIAPP_REG_MK_U8(0x001a) +#define SMIAPP_REG_U32_SERIAL_NUMBER SMIAPP_REG_MK_U32(0x001c) +#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE SMIAPP_REG_MK_U8(0x0040) +#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE SMIAPP_REG_MK_U8(0x0041) +#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n) SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */ +#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n) SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */ +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY SMIAPP_REG_MK_U16(0x0080) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN SMIAPP_REG_MK_U16(0x0084) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX SMIAPP_REG_MK_U16(0x0086) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP SMIAPP_REG_MK_U16(0x0088) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE SMIAPP_REG_MK_U16(0x008a) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0 SMIAPP_REG_MK_U16(0x008c) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0 SMIAPP_REG_MK_U16(0x008e) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1 SMIAPP_REG_MK_U16(0x0090) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1 SMIAPP_REG_MK_U16(0x0092) +#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE SMIAPP_REG_MK_U8(0x00c0) +#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE SMIAPP_REG_MK_U8(0x00c1) +#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n) SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1)) +#define SMIAPP_REG_U8_MODE_SELECT SMIAPP_REG_MK_U8(0x0100) +#define SMIAPP_REG_U8_IMAGE_ORIENTATION SMIAPP_REG_MK_U8(0x0101) +#define SMIAPP_REG_U8_SOFTWARE_RESET SMIAPP_REG_MK_U8(0x0103) +#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD SMIAPP_REG_MK_U8(0x0104) +#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES SMIAPP_REG_MK_U8(0x0105) +#define SMIAPP_REG_U8_FAST_STANDBY_CTRL SMIAPP_REG_MK_U8(0x0106) +#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL SMIAPP_REG_MK_U8(0x0107) +#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL SMIAPP_REG_MK_U8(0x0108) +#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL SMIAPP_REG_MK_U8(0x0109) +#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER SMIAPP_REG_MK_U8(0x0110) +#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE SMIAPP_REG_MK_U8(0x0111) +#define SMIAPP_REG_U16_CSI_DATA_FORMAT SMIAPP_REG_MK_U16(0x0112) +#define SMIAPP_REG_U8_CSI_LANE_MODE SMIAPP_REG_MK_U8(0x0114) +#define SMIAPP_REG_U8_CSI2_10_TO_8_DT SMIAPP_REG_MK_U8(0x0115) +#define SMIAPP_REG_U8_CSI2_10_TO_7_DT SMIAPP_REG_MK_U8(0x0116) +#define SMIAPP_REG_U8_CSI2_10_TO_6_DT SMIAPP_REG_MK_U8(0x0117) +#define SMIAPP_REG_U8_CSI2_12_TO_8_DT SMIAPP_REG_MK_U8(0x0118) +#define SMIAPP_REG_U8_CSI2_12_TO_7_DT SMIAPP_REG_MK_U8(0x0119) +#define SMIAPP_REG_U8_CSI2_12_TO_6_DT SMIAPP_REG_MK_U8(0x011a) +#define SMIAPP_REG_U8_CSI2_14_TO_10_DT SMIAPP_REG_MK_U8(0x011b) +#define SMIAPP_REG_U8_CSI2_14_TO_8_DT SMIAPP_REG_MK_U8(0x011c) +#define SMIAPP_REG_U8_CSI2_16_TO_10_DT SMIAPP_REG_MK_U8(0x011d) +#define SMIAPP_REG_U8_CSI2_16_TO_8_DT SMIAPP_REG_MK_U8(0x011e) +#define SMIAPP_REG_U8_GAIN_MODE SMIAPP_REG_MK_U8(0x0120) +#define SMIAPP_REG_U16_VANA_VOLTAGE SMIAPP_REG_MK_U16(0x0130) +#define SMIAPP_REG_U16_VDIG_VOLTAGE SMIAPP_REG_MK_U16(0x0132) +#define SMIAPP_REG_U16_VIO_VOLTAGE SMIAPP_REG_MK_U16(0x0134) +#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ SMIAPP_REG_MK_U16(0x0136) +#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL SMIAPP_REG_MK_U8(0x0138) +#define SMIAPP_REG_U8_TEMP_SENSOR_MODE SMIAPP_REG_MK_U8(0x0139) +#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT SMIAPP_REG_MK_U8(0x013a) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME SMIAPP_REG_MK_U16(0x0200) +#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME SMIAPP_REG_MK_U16(0x0202) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL SMIAPP_REG_MK_U16(0x0204) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR SMIAPP_REG_MK_U16(0x0206) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED SMIAPP_REG_MK_U16(0x0208) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE SMIAPP_REG_MK_U16(0x020a) +#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB SMIAPP_REG_MK_U16(0x020c) +#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR SMIAPP_REG_MK_U16(0x020e) +#define SMIAPP_REG_U16_DIGITAL_GAIN_RED SMIAPP_REG_MK_U16(0x0210) +#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE SMIAPP_REG_MK_U16(0x0212) +#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB SMIAPP_REG_MK_U16(0x0214) +#define SMIAPP_REG_U16_VT_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x0300) +#define SMIAPP_REG_U16_VT_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x0302) +#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV SMIAPP_REG_MK_U16(0x0304) +#define SMIAPP_REG_U16_PLL_MULTIPLIER SMIAPP_REG_MK_U16(0x0306) +#define SMIAPP_REG_U16_OP_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x0308) +#define SMIAPP_REG_U16_OP_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x030a) +#define SMIAPP_REG_U16_FRAME_LENGTH_LINES SMIAPP_REG_MK_U16(0x0340) +#define SMIAPP_REG_U16_LINE_LENGTH_PCK SMIAPP_REG_MK_U16(0x0342) +#define SMIAPP_REG_U16_X_ADDR_START SMIAPP_REG_MK_U16(0x0344) +#define SMIAPP_REG_U16_Y_ADDR_START SMIAPP_REG_MK_U16(0x0346) +#define SMIAPP_REG_U16_X_ADDR_END SMIAPP_REG_MK_U16(0x0348) +#define SMIAPP_REG_U16_Y_ADDR_END SMIAPP_REG_MK_U16(0x034a) +#define SMIAPP_REG_U16_X_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x034c) +#define SMIAPP_REG_U16_Y_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x034e) +#define SMIAPP_REG_U16_X_EVEN_INC SMIAPP_REG_MK_U16(0x0380) +#define SMIAPP_REG_U16_X_ODD_INC SMIAPP_REG_MK_U16(0x0382) +#define SMIAPP_REG_U16_Y_EVEN_INC SMIAPP_REG_MK_U16(0x0384) +#define SMIAPP_REG_U16_Y_ODD_INC SMIAPP_REG_MK_U16(0x0386) +#define SMIAPP_REG_U16_SCALING_MODE SMIAPP_REG_MK_U16(0x0400) +#define SMIAPP_REG_U16_SPATIAL_SAMPLING SMIAPP_REG_MK_U16(0x0402) +#define SMIAPP_REG_U16_SCALE_M SMIAPP_REG_MK_U16(0x0404) +#define SMIAPP_REG_U16_SCALE_N SMIAPP_REG_MK_U16(0x0406) +#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET SMIAPP_REG_MK_U16(0x0408) +#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET SMIAPP_REG_MK_U16(0x040a) +#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH SMIAPP_REG_MK_U16(0x040c) +#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT SMIAPP_REG_MK_U16(0x040e) +#define SMIAPP_REG_U16_COMPRESSION_MODE SMIAPP_REG_MK_U16(0x0500) +#define SMIAPP_REG_U16_TEST_PATTERN_MODE SMIAPP_REG_MK_U16(0x0600) +#define SMIAPP_REG_U16_TEST_DATA_RED SMIAPP_REG_MK_U16(0x0602) +#define SMIAPP_REG_U16_TEST_DATA_GREENR SMIAPP_REG_MK_U16(0x0604) +#define SMIAPP_REG_U16_TEST_DATA_BLUE SMIAPP_REG_MK_U16(0x0606) +#define SMIAPP_REG_U16_TEST_DATA_GREENB SMIAPP_REG_MK_U16(0x0608) +#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH SMIAPP_REG_MK_U16(0x060a) +#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION SMIAPP_REG_MK_U16(0x060c) +#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH SMIAPP_REG_MK_U16(0x060e) +#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION SMIAPP_REG_MK_U16(0x0610) +#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS SMIAPP_REG_MK_U16(0x0700) +#define SMIAPP_REG_U8_TCLK_POST SMIAPP_REG_MK_U8(0x0800) +#define SMIAPP_REG_U8_THS_PREPARE SMIAPP_REG_MK_U8(0x0801) +#define SMIAPP_REG_U8_THS_ZERO_MIN SMIAPP_REG_MK_U8(0x0802) +#define SMIAPP_REG_U8_THS_TRAIL SMIAPP_REG_MK_U8(0x0803) +#define SMIAPP_REG_U8_TCLK_TRAIL_MIN SMIAPP_REG_MK_U8(0x0804) +#define SMIAPP_REG_U8_TCLK_PREPARE SMIAPP_REG_MK_U8(0x0805) +#define SMIAPP_REG_U8_TCLK_ZERO SMIAPP_REG_MK_U8(0x0806) +#define SMIAPP_REG_U8_TLPX SMIAPP_REG_MK_U8(0x0807) +#define SMIAPP_REG_U8_DPHY_CTRL SMIAPP_REG_MK_U8(0x0808) +#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS SMIAPP_REG_MK_U32(0x0820) +#define SMIAPP_REG_U8_BINNING_MODE SMIAPP_REG_MK_U8(0x0900) +#define SMIAPP_REG_U8_BINNING_TYPE SMIAPP_REG_MK_U8(0x0901) +#define SMIAPP_REG_U8_BINNING_WEIGHTING SMIAPP_REG_MK_U8(0x0902) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL SMIAPP_REG_MK_U8(0x0a00) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS SMIAPP_REG_MK_U8(0x0a01) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT SMIAPP_REG_MK_U8(0x0a02) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 SMIAPP_REG_MK_U8(0x0a04) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1 SMIAPP_REG_MK_U8(0x0a05) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2 SMIAPP_REG_MK_U8(0x0a06) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3 SMIAPP_REG_MK_U8(0x0a07) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4 SMIAPP_REG_MK_U8(0x0a08) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5 SMIAPP_REG_MK_U8(0x0a09) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12 SMIAPP_REG_MK_U8(0x0a10) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13 SMIAPP_REG_MK_U8(0x0a11) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14 SMIAPP_REG_MK_U8(0x0a12) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15 SMIAPP_REG_MK_U8(0x0a13) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16 SMIAPP_REG_MK_U8(0x0a14) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17 SMIAPP_REG_MK_U8(0x0a15) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18 SMIAPP_REG_MK_U8(0x0a16) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19 SMIAPP_REG_MK_U8(0x0a17) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20 SMIAPP_REG_MK_U8(0x0a18) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21 SMIAPP_REG_MK_U8(0x0a19) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22 SMIAPP_REG_MK_U8(0x0a1a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23 SMIAPP_REG_MK_U8(0x0a1b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24 SMIAPP_REG_MK_U8(0x0a1c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25 SMIAPP_REG_MK_U8(0x0a1d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26 SMIAPP_REG_MK_U8(0x0a1e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27 SMIAPP_REG_MK_U8(0x0a1f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28 SMIAPP_REG_MK_U8(0x0a20) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29 SMIAPP_REG_MK_U8(0x0a21) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30 SMIAPP_REG_MK_U8(0x0a22) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31 SMIAPP_REG_MK_U8(0x0a23) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32 SMIAPP_REG_MK_U8(0x0a24) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33 SMIAPP_REG_MK_U8(0x0a25) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34 SMIAPP_REG_MK_U8(0x0a26) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35 SMIAPP_REG_MK_U8(0x0a27) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36 SMIAPP_REG_MK_U8(0x0a28) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37 SMIAPP_REG_MK_U8(0x0a29) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38 SMIAPP_REG_MK_U8(0x0a2a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39 SMIAPP_REG_MK_U8(0x0a2b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40 SMIAPP_REG_MK_U8(0x0a2c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41 SMIAPP_REG_MK_U8(0x0a2d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42 SMIAPP_REG_MK_U8(0x0a2e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43 SMIAPP_REG_MK_U8(0x0a2f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44 SMIAPP_REG_MK_U8(0x0a30) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45 SMIAPP_REG_MK_U8(0x0a31) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46 SMIAPP_REG_MK_U8(0x0a32) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47 SMIAPP_REG_MK_U8(0x0a33) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48 SMIAPP_REG_MK_U8(0x0a34) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49 SMIAPP_REG_MK_U8(0x0a35) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50 SMIAPP_REG_MK_U8(0x0a36) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51 SMIAPP_REG_MK_U8(0x0a37) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52 SMIAPP_REG_MK_U8(0x0a38) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53 SMIAPP_REG_MK_U8(0x0a39) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54 SMIAPP_REG_MK_U8(0x0a3a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55 SMIAPP_REG_MK_U8(0x0a3b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56 SMIAPP_REG_MK_U8(0x0a3c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57 SMIAPP_REG_MK_U8(0x0a3d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58 SMIAPP_REG_MK_U8(0x0a3e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59 SMIAPP_REG_MK_U8(0x0a3f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60 SMIAPP_REG_MK_U8(0x0a40) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61 SMIAPP_REG_MK_U8(0x0a41) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62 SMIAPP_REG_MK_U8(0x0a42) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63 SMIAPP_REG_MK_U8(0x0a43) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL SMIAPP_REG_MK_U8(0x0a44) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS SMIAPP_REG_MK_U8(0x0a45) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT SMIAPP_REG_MK_U8(0x0a46) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0 SMIAPP_REG_MK_U8(0x0a48) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1 SMIAPP_REG_MK_U8(0x0a49) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2 SMIAPP_REG_MK_U8(0x0a4a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3 SMIAPP_REG_MK_U8(0x0a4b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4 SMIAPP_REG_MK_U8(0x0a4c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5 SMIAPP_REG_MK_U8(0x0a4d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6 SMIAPP_REG_MK_U8(0x0a4e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7 SMIAPP_REG_MK_U8(0x0a4f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8 SMIAPP_REG_MK_U8(0x0a50) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9 SMIAPP_REG_MK_U8(0x0a51) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10 SMIAPP_REG_MK_U8(0x0a52) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11 SMIAPP_REG_MK_U8(0x0a53) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12 SMIAPP_REG_MK_U8(0x0a54) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13 SMIAPP_REG_MK_U8(0x0a55) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14 SMIAPP_REG_MK_U8(0x0a56) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15 SMIAPP_REG_MK_U8(0x0a57) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16 SMIAPP_REG_MK_U8(0x0a58) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17 SMIAPP_REG_MK_U8(0x0a59) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18 SMIAPP_REG_MK_U8(0x0a5a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19 SMIAPP_REG_MK_U8(0x0a5b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20 SMIAPP_REG_MK_U8(0x0a5c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21 SMIAPP_REG_MK_U8(0x0a5d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22 SMIAPP_REG_MK_U8(0x0a5e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23 SMIAPP_REG_MK_U8(0x0a5f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24 SMIAPP_REG_MK_U8(0x0a60) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25 SMIAPP_REG_MK_U8(0x0a61) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26 SMIAPP_REG_MK_U8(0x0a62) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27 SMIAPP_REG_MK_U8(0x0a63) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28 SMIAPP_REG_MK_U8(0x0a64) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29 SMIAPP_REG_MK_U8(0x0a65) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30 SMIAPP_REG_MK_U8(0x0a66) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31 SMIAPP_REG_MK_U8(0x0a67) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32 SMIAPP_REG_MK_U8(0x0a68) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33 SMIAPP_REG_MK_U8(0x0a69) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34 SMIAPP_REG_MK_U8(0x0a6a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35 SMIAPP_REG_MK_U8(0x0a6b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36 SMIAPP_REG_MK_U8(0x0a6c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37 SMIAPP_REG_MK_U8(0x0a6d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38 SMIAPP_REG_MK_U8(0x0a6e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39 SMIAPP_REG_MK_U8(0x0a6f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40 SMIAPP_REG_MK_U8(0x0a70) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41 SMIAPP_REG_MK_U8(0x0a71) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42 SMIAPP_REG_MK_U8(0x0a72) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43 SMIAPP_REG_MK_U8(0x0a73) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44 SMIAPP_REG_MK_U8(0x0a74) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45 SMIAPP_REG_MK_U8(0x0a75) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46 SMIAPP_REG_MK_U8(0x0a76) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47 SMIAPP_REG_MK_U8(0x0a77) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48 SMIAPP_REG_MK_U8(0x0a78) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49 SMIAPP_REG_MK_U8(0x0a79) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50 SMIAPP_REG_MK_U8(0x0a7a) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51 SMIAPP_REG_MK_U8(0x0a7b) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52 SMIAPP_REG_MK_U8(0x0a7c) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53 SMIAPP_REG_MK_U8(0x0a7d) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54 SMIAPP_REG_MK_U8(0x0a7e) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55 SMIAPP_REG_MK_U8(0x0a7f) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56 SMIAPP_REG_MK_U8(0x0a80) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57 SMIAPP_REG_MK_U8(0x0a81) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58 SMIAPP_REG_MK_U8(0x0a82) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59 SMIAPP_REG_MK_U8(0x0a83) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60 SMIAPP_REG_MK_U8(0x0a84) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61 SMIAPP_REG_MK_U8(0x0a85) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62 SMIAPP_REG_MK_U8(0x0a86) +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63 SMIAPP_REG_MK_U8(0x0a87) +#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE SMIAPP_REG_MK_U8(0x0b00) +#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL SMIAPP_REG_MK_U8(0x0b01) +#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE SMIAPP_REG_MK_U8(0x0b02) +#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT SMIAPP_REG_MK_U8(0x0b03) +#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE SMIAPP_REG_MK_U8(0x0b04) +#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b05) +#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b06) +#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT SMIAPP_REG_MK_U8(0x0b07) +#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b08) +#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT SMIAPP_REG_MK_U8(0x0b09) +#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b0a) +#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT SMIAPP_REG_MK_U8(0x0b0b) +#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE SMIAPP_REG_MK_U8(0x0b0c) +#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT SMIAPP_REG_MK_U8(0x0b0d) +#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b0e) +#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b0f) +#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b10) +#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b11) +#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b12) +#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b13) +#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b14) +#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE SMIAPP_REG_MK_U8(0x0b15) +#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST SMIAPP_REG_MK_U8(0x0b16) +#define SMIAPP_REG_U8_EDOF_MODE SMIAPP_REG_MK_U8(0x0b80) +#define SMIAPP_REG_U8_SHARPNESS SMIAPP_REG_MK_U8(0x0b83) +#define SMIAPP_REG_U8_DENOISING SMIAPP_REG_MK_U8(0x0b84) +#define SMIAPP_REG_U8_MODULE_SPECIFIC SMIAPP_REG_MK_U8(0x0b85) +#define SMIAPP_REG_U16_DEPTH_OF_FIELD SMIAPP_REG_MK_U16(0x0b86) +#define SMIAPP_REG_U16_FOCUS_DISTANCE SMIAPP_REG_MK_U16(0x0b88) +#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL SMIAPP_REG_MK_U8(0x0b8a) +#define SMIAPP_REG_U16_COLOUR_TEMPERATURE SMIAPP_REG_MK_U16(0x0b8c) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR SMIAPP_REG_MK_U16(0x0b8e) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED SMIAPP_REG_MK_U16(0x0b90) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE SMIAPP_REG_MK_U16(0x0b92) +#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB SMIAPP_REG_MK_U16(0x0b94) +#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE SMIAPP_REG_MK_U8(0x0bc0) +#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING SMIAPP_REG_MK_U16(0x0bc2) +#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START SMIAPP_REG_MK_U16(0x0bc4) +#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START SMIAPP_REG_MK_U16(0x0bc6) +#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH SMIAPP_REG_MK_U16(0x0bc8) +#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT SMIAPP_REG_MK_U16(0x0bca) +#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1 SMIAPP_REG_MK_U8(0x0c00) +#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2 SMIAPP_REG_MK_U8(0x0c01) +#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1 SMIAPP_REG_MK_U8(0x0c02) +#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2 SMIAPP_REG_MK_U8(0x0c03) +#define SMIAPP_REG_U16_TRDY_CTRL SMIAPP_REG_MK_U16(0x0c04) +#define SMIAPP_REG_U16_TRDOUT_CTRL SMIAPP_REG_MK_U16(0x0c06) +#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL SMIAPP_REG_MK_U16(0x0c08) +#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL SMIAPP_REG_MK_U16(0x0c0a) +#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL SMIAPP_REG_MK_U16(0x0c0c) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL SMIAPP_REG_MK_U16(0x0c0e) +#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL SMIAPP_REG_MK_U16(0x0c10) +#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT SMIAPP_REG_MK_U8(0x0c12) +#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT SMIAPP_REG_MK_U16(0x0c14) +#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL SMIAPP_REG_MK_U16(0x0c16) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL SMIAPP_REG_MK_U16(0x0c18) +#define SMIAPP_REG_U8_FLASH_MODE_RS SMIAPP_REG_MK_U8(0x0c1a) +#define SMIAPP_REG_U8_FLASH_TRIGGER_RS SMIAPP_REG_MK_U8(0x0c1b) +#define SMIAPP_REG_U8_FLASH_STATUS SMIAPP_REG_MK_U8(0x0c1c) +#define SMIAPP_REG_U8_SA_STROBE_MODE SMIAPP_REG_MK_U8(0x0c1d) +#define SMIAPP_REG_U16_SA_STROBE_START_POINT SMIAPP_REG_MK_U16(0x0c1e) +#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL SMIAPP_REG_MK_U16(0x0c20) +#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL SMIAPP_REG_MK_U16(0x0c22) +#define SMIAPP_REG_U8_SA_STROBE_TRIGGER SMIAPP_REG_MK_U8(0x0c24) +#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS SMIAPP_REG_MK_U8(0x0c25) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL SMIAPP_REG_MK_U16(0x0c26) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL SMIAPP_REG_MK_U16(0x0c28) +#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL SMIAPP_REG_MK_U8(0x0c2a) +#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL SMIAPP_REG_MK_U8(0x0c2b) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL SMIAPP_REG_MK_U16(0x0c2c) +#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL SMIAPP_REG_MK_U16(0x0c2e) +#define SMIAPP_REG_U8_LOW_LEVEL_CTRL SMIAPP_REG_MK_U8(0x0c80) +#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT SMIAPP_REG_MK_U16(0x0c82) +#define SMIAPP_REG_U16_MAIN_TRIGGER_T3 SMIAPP_REG_MK_U16(0x0c84) +#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT SMIAPP_REG_MK_U8(0x0c86) +#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3 SMIAPP_REG_MK_U16(0x0c88) +#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT SMIAPP_REG_MK_U8(0x0c8a) +#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3 SMIAPP_REG_MK_U16(0x0c8c) +#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT SMIAPP_REG_MK_U8(0x0c8e) +#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL SMIAPP_REG_MK_U8(0x0d00) +#define SMIAPP_REG_U8_OPERATION_MODE SMIAPP_REG_MK_U8(0x0d01) +#define SMIAPP_REG_U8_ACT_STATE1 SMIAPP_REG_MK_U8(0x0d02) +#define SMIAPP_REG_U8_ACT_STATE2 SMIAPP_REG_MK_U8(0x0d03) +#define SMIAPP_REG_U16_FOCUS_CHANGE SMIAPP_REG_MK_U16(0x0d80) +#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL SMIAPP_REG_MK_U16(0x0d82) +#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1 SMIAPP_REG_MK_U16(0x0d84) +#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2 SMIAPP_REG_MK_U16(0x0d86) +#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1 SMIAPP_REG_MK_U8(0x0d88) +#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2 SMIAPP_REG_MK_U8(0x0d89) +#define SMIAPP_REG_U8_POSITION SMIAPP_REG_MK_U8(0x0d8a) +#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL SMIAPP_REG_MK_U8(0x0e00) +#define SMIAPP_REG_U8_BRACKETING_LUT_MODE SMIAPP_REG_MK_U8(0x0e01) +#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL SMIAPP_REG_MK_U8(0x0e02) +#define SMIAPP_REG_U8_LUT_PARAMETERS_START SMIAPP_REG_MK_U8(0x0e10) +#define SMIAPP_REG_U8_LUT_PARAMETERS_END SMIAPP_REG_MK_U8(0x0eff) +#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY SMIAPP_REG_MK_U16(0x1000) +#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN SMIAPP_REG_MK_U16(0x1004) +#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN SMIAPP_REG_MK_U16(0x1006) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN SMIAPP_REG_MK_U16(0x1008) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN SMIAPP_REG_MK_U16(0x100a) +#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY SMIAPP_REG_MK_U16(0x1080) +#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN SMIAPP_REG_MK_U16(0x1084) +#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX SMIAPP_REG_MK_U16(0x1086) +#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE SMIAPP_REG_MK_U16(0x1088) +#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1100) +#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1104) +#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV SMIAPP_REG_MK_U16(0x1108) +#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV SMIAPP_REG_MK_U16(0x110a) +#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ SMIAPP_REG_MK_F32(0x110c) +#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ SMIAPP_REG_MK_F32(0x1110) +#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER SMIAPP_REG_MK_U16(0x1114) +#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER SMIAPP_REG_MK_U16(0x1116) +#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ SMIAPP_REG_MK_F32(0x1118) +#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ SMIAPP_REG_MK_F32(0x111c) +#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1120) +#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1122) +#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1124) +#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1128) +#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x112c) +#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1130) +#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x1134) +#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x1136) +#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES SMIAPP_REG_MK_U16(0x1140) +#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES SMIAPP_REG_MK_U16(0x1142) +#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK SMIAPP_REG_MK_U16(0x1144) +#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK SMIAPP_REG_MK_U16(0x1146) +#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK SMIAPP_REG_MK_U16(0x1148) +#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES SMIAPP_REG_MK_U16(0x114a) +#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE SMIAPP_REG_MK_U8(0x114c) +#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1160) +#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV SMIAPP_REG_MK_U16(0x1162) +#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1164) +#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1168) +#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x116c) +#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV SMIAPP_REG_MK_U16(0x116e) +#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1170) +#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ SMIAPP_REG_MK_F32(0x1174) +#define SMIAPP_REG_U16_X_ADDR_MIN SMIAPP_REG_MK_U16(0x1180) +#define SMIAPP_REG_U16_Y_ADDR_MIN SMIAPP_REG_MK_U16(0x1182) +#define SMIAPP_REG_U16_X_ADDR_MAX SMIAPP_REG_MK_U16(0x1184) +#define SMIAPP_REG_U16_Y_ADDR_MAX SMIAPP_REG_MK_U16(0x1186) +#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x1188) +#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x118a) +#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x118c) +#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE SMIAPP_REG_MK_U16(0x118e) +#define SMIAPP_REG_U16_MIN_EVEN_INC SMIAPP_REG_MK_U16(0x11c0) +#define SMIAPP_REG_U16_MAX_EVEN_INC SMIAPP_REG_MK_U16(0x11c2) +#define SMIAPP_REG_U16_MIN_ODD_INC SMIAPP_REG_MK_U16(0x11c4) +#define SMIAPP_REG_U16_MAX_ODD_INC SMIAPP_REG_MK_U16(0x11c6) +#define SMIAPP_REG_U16_SCALING_CAPABILITY SMIAPP_REG_MK_U16(0x1200) +#define SMIAPP_REG_U16_SCALER_M_MIN SMIAPP_REG_MK_U16(0x1204) +#define SMIAPP_REG_U16_SCALER_M_MAX SMIAPP_REG_MK_U16(0x1206) +#define SMIAPP_REG_U16_SCALER_N_MIN SMIAPP_REG_MK_U16(0x1208) +#define SMIAPP_REG_U16_SCALER_N_MAX SMIAPP_REG_MK_U16(0x120a) +#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY SMIAPP_REG_MK_U16(0x120c) +#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY SMIAPP_REG_MK_U8(0x120e) +#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY SMIAPP_REG_MK_U16(0x1300) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED SMIAPP_REG_MK_U16(0x1400) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED SMIAPP_REG_MK_U16(0x1402) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED SMIAPP_REG_MK_U16(0x1404) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN SMIAPP_REG_MK_U16(0x1406) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN SMIAPP_REG_MK_U16(0x1408) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN SMIAPP_REG_MK_U16(0x140a) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE SMIAPP_REG_MK_U16(0x140c) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE SMIAPP_REG_MK_U16(0x140e) +#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE SMIAPP_REG_MK_U16(0x1410) +#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS SMIAPP_REG_MK_U16(0x1500) +#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY SMIAPP_REG_MK_U8(0x1502) +#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY SMIAPP_REG_MK_U8(0x1600) +#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x1601) +#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x1602) +#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY SMIAPP_REG_MK_U8(0x1603) +#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY SMIAPP_REG_MK_U8(0x1604) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x1608) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x160c) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x1610) +#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS SMIAPP_REG_MK_U32(0x1614) +#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY SMIAPP_REG_MK_U8(0x1618) +#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN SMIAPP_REG_MK_U16(0x1700) +#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN SMIAPP_REG_MK_U16(0x1702) +#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN SMIAPP_REG_MK_U16(0x1704) +#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN SMIAPP_REG_MK_U16(0x1706) +#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN SMIAPP_REG_MK_U16(0x1708) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN SMIAPP_REG_MK_U16(0x170a) +#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN SMIAPP_REG_MK_U16(0x170c) +#define SMIAPP_REG_U8_BINNING_CAPABILITY SMIAPP_REG_MK_U8(0x1710) +#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY SMIAPP_REG_MK_U8(0x1711) +#define SMIAPP_REG_U8_BINNING_SUBTYPES SMIAPP_REG_MK_U8(0x1712) +#define SMIAPP_REG_U8_BINNING_TYPE_n(n) SMIAPP_REG_MK_U8(0x1713 + (n)) /* 1 <= n <= 237 */ +#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY SMIAPP_REG_MK_U8(0x1800) +#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY SMIAPP_REG_MK_U8(0x1900) +#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY SMIAPP_REG_MK_U8(0x1901) +#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY SMIAPP_REG_MK_U8(0x1902) +#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY SMIAPP_REG_MK_U8(0x1903) +#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY SMIAPP_REG_MK_U16(0x1904) +#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2 SMIAPP_REG_MK_U16(0x1906) +#define SMIAPP_REG_U8_EDOF_CAPABILITY SMIAPP_REG_MK_U8(0x1980) +#define SMIAPP_REG_U8_ESTIMATION_FRAMES SMIAPP_REG_MK_U8(0x1981) +#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ SMIAPP_REG_MK_U8(0x1982) +#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ SMIAPP_REG_MK_U8(0x1983) +#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ SMIAPP_REG_MK_U8(0x1984) +#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ SMIAPP_REG_MK_U8(0x1985) +#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ SMIAPP_REG_MK_U8(0x1986) +#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY SMIAPP_REG_MK_U8(0x1987) +#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM SMIAPP_REG_MK_U8(0x1988) +#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x19c0) +#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY SMIAPP_REG_MK_U8(0x19c1) +#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD SMIAPP_REG_MK_U16(0x19c2) +#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE SMIAPP_REG_MK_U16(0x19c4) +#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN SMIAPP_REG_MK_U16(0x1a00) +#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY SMIAPP_REG_MK_U8(0x1a02) +#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR SMIAPP_REG_MK_U16(0x1b02) +#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY SMIAPP_REG_MK_U8(0x1b04) +#define SMIAPP_REG_U16_ACTUATOR_TYPE SMIAPP_REG_MK_U16(0x1b40) +#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS SMIAPP_REG_MK_U8(0x1b42) +#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS SMIAPP_REG_MK_U16(0x1b44) +#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1 SMIAPP_REG_MK_U8(0x1c00) +#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2 SMIAPP_REG_MK_U8(0x1c01) +#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE SMIAPP_REG_MK_U8(0x1c02) diff --git a/drivers/media/i2c/smiapp/smiapp-reg.h b/drivers/media/i2c/smiapp/smiapp-reg.h new file mode 100644 index 000000000000..54568ca2fe6d --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-reg.h @@ -0,0 +1,122 @@ +/* + * drivers/media/i2c/smiapp/smiapp-reg.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_REG_H_ +#define __SMIAPP_REG_H_ + +#include "smiapp-reg-defs.h" + +/* Bits for above register */ +#define SMIAPP_IMAGE_ORIENTATION_HFLIP (1 << 0) +#define SMIAPP_IMAGE_ORIENTATION_VFLIP (1 << 1) + +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN (1 << 0) +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN (0 << 1) +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN (1 << 1) +#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR (1 << 2) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY (1 << 0) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY (1 << 1) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA (1 << 2) +#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE (1 << 3) + +#define SMIAPP_SOFTWARE_RESET (1 << 0) + +#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE (1 << 0) +#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE (1 << 1) + +#define SMIAPP_DPHY_CTRL_AUTOMATIC 0 +/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */ +#define SMIAPP_DPHY_CTRL_UI 1 +#define SMIAPP_DPHY_CTRL_REGISTER 2 + +#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR 1 +#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR 2 + +#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY 0 +#define SMIAPP_MODE_SELECT_STREAMING 1 + +#define SMIAPP_SCALING_MODE_NONE 0 +#define SMIAPP_SCALING_MODE_HORIZONTAL 1 +#define SMIAPP_SCALING_MODE_BOTH 2 + +#define SMIAPP_SCALING_CAPABILITY_NONE 0 +#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL 1 +#define SMIAPP_SCALING_CAPABILITY_BOTH 2 /* horizontal/both */ + +/* digital crop right before scaler */ +#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE 0 +#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP 1 + +#define SMIAPP_BINNING_CAPABILITY_NO 0 +#define SMIAPP_BINNING_CAPABILITY_YES 1 + +/* Maximum number of binning subtypes */ +#define SMIAPP_BINNING_SUBTYPES 253 + +#define SMIAPP_PIXEL_ORDER_GRBG 0 +#define SMIAPP_PIXEL_ORDER_RGGB 1 +#define SMIAPP_PIXEL_ORDER_BGGR 2 +#define SMIAPP_PIXEL_ORDER_GBRG 3 + +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL 1 +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED 2 +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N 8 +#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N 16 + +#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE 0x01 +#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE 0x02 +#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK 0x0f +#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK 0xf0 +#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT 4 + +#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK 0xf000 +#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT 12 +#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK 0x0fff + +#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK 0xf0000000 +#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT 28 +#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK 0x0000ffff + +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED 1 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY 2 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK 3 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK 4 +#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE 5 + +#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES 0 +#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE 1 + +/* Scaling N factor */ +#define SMIAPP_SCALE_N 16 + +/* Image statistics registers */ +/* Registers 0x2000 to 0x2fff are reserved for future + * use for statistics features. + */ + +/* Manufacturer Specific Registers: 0x3000 to 0x3fff + * The manufacturer specifies these as a black box. + */ + +#endif /* __SMIAPP_REG_H_ */ diff --git a/drivers/media/i2c/smiapp/smiapp-regs.c b/drivers/media/i2c/smiapp/smiapp-regs.c new file mode 100644 index 000000000000..70e0d8db0130 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-regs.c @@ -0,0 +1,273 @@ +/* + * drivers/media/i2c/smiapp/smiapp-regs.c + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> + +#include "smiapp.h" +#include "smiapp-regs.h" + +static uint32_t float_to_u32_mul_1000000(struct i2c_client *client, + uint32_t phloat) +{ + int32_t exp; + uint64_t man; + + if (phloat >= 0x80000000) { + dev_err(&client->dev, "this is a negative number\n"); + return 0; + } + + if (phloat == 0x7f800000) + return ~0; /* Inf. */ + + if ((phloat & 0x7f800000) == 0x7f800000) { + dev_err(&client->dev, "NaN or other special number\n"); + return 0; + } + + /* Valid cases begin here */ + if (phloat == 0) + return 0; /* Valid zero */ + + if (phloat > 0x4f800000) + return ~0; /* larger than 4294967295 */ + + /* + * Unbias exponent (note how phloat is now guaranteed to + * have 0 in the high bit) + */ + exp = ((int32_t)phloat >> 23) - 127; + + /* Extract mantissa, add missing '1' bit and it's in MHz */ + man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL; + + if (exp < 0) + man >>= -exp; + else + man <<= exp; + + man >>= 23; /* Remove mantissa bias */ + + return man & 0xffffffff; +} + + +/* + * Read a 8/16/32-bit i2c register. The value is returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int ____smiapp_read(struct smiapp_sensor *sensor, u16 reg, + u16 len, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct i2c_msg msg; + unsigned char data[4]; + u16 offset = reg; + int r; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 2; + msg.buf = data; + + /* high byte goes out first */ + data[0] = (u8) (offset >> 8); + data[1] = (u8) offset; + r = i2c_transfer(client->adapter, &msg, 1); + if (r != 1) { + if (r >= 0) + r = -EBUSY; + goto err; + } + + msg.len = len; + msg.flags = I2C_M_RD; + r = i2c_transfer(client->adapter, &msg, 1); + if (r != 1) { + if (r >= 0) + r = -EBUSY; + goto err; + } + + *val = 0; + /* high byte comes first */ + switch (len) { + case SMIA_REG_32BIT: + *val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) + + data[3]; + break; + case SMIA_REG_16BIT: + *val = (data[0] << 8) + data[1]; + break; + case SMIA_REG_8BIT: + *val = data[0]; + break; + default: + BUG(); + } + + return 0; + +err: + dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r); + + return r; +} + +/* Read a register using 8-bit access only. */ +static int ____smiapp_read_8only(struct smiapp_sensor *sensor, u16 reg, + u16 len, u32 *val) +{ + unsigned int i; + int rval; + + *val = 0; + + for (i = 0; i < len; i++) { + u32 val8; + + rval = ____smiapp_read(sensor, reg + i, 1, &val8); + if (rval < 0) + return rval; + *val |= val8 << ((len - i - 1) << 3); + } + + return 0; +} + +/* + * Read a 8/16/32-bit i2c register. The value is returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int __smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val, + bool only8) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + unsigned int len = (u8)(reg >> 16); + int rval; + + if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT + && len != SMIA_REG_32BIT) + return -EINVAL; + + if (smiapp_quirk_reg(sensor, reg, val)) + goto found_quirk; + + if (len == SMIA_REG_8BIT && !only8) + rval = ____smiapp_read(sensor, (u16)reg, len, val); + else + rval = ____smiapp_read_8only(sensor, (u16)reg, len, val); + if (rval < 0) + return rval; + +found_quirk: + if (reg & SMIA_REG_FLAG_FLOAT) + *val = float_to_u32_mul_1000000(client, *val); + + return 0; +} + +int smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val) +{ + return __smiapp_read( + sensor, reg, val, + smiapp_needs_quirk(sensor, + SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY)); +} + +int smiapp_read_8only(struct smiapp_sensor *sensor, u32 reg, u32 *val) +{ + return __smiapp_read(sensor, reg, val, true); +} + +/* + * Write to a 8/16-bit register. + * Returns zero if successful, or non-zero otherwise. + */ +int smiapp_write(struct smiapp_sensor *sensor, u32 reg, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct i2c_msg msg; + unsigned char data[6]; + unsigned int retries; + unsigned int flags = reg >> 24; + unsigned int len = (u8)(reg >> 16); + u16 offset = reg; + int r; + + if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT && + len != SMIA_REG_32BIT) || flags) + return -EINVAL; + + msg.addr = client->addr; + msg.flags = 0; /* Write */ + msg.len = 2 + len; + msg.buf = data; + + /* high byte goes out first */ + data[0] = (u8) (reg >> 8); + data[1] = (u8) (reg & 0xff); + + switch (len) { + case SMIA_REG_8BIT: + data[2] = val; + break; + case SMIA_REG_16BIT: + data[2] = val >> 8; + data[3] = val; + break; + case SMIA_REG_32BIT: + data[2] = val >> 24; + data[3] = val >> 16; + data[4] = val >> 8; + data[5] = val; + break; + default: + BUG(); + } + + for (retries = 0; retries < 5; retries++) { + /* + * Due to unknown reason sensor stops responding. This + * loop is a temporaty solution until the root cause + * is found. + */ + r = i2c_transfer(client->adapter, &msg, 1); + if (r == 1) { + if (retries) + dev_err(&client->dev, + "sensor i2c stall encountered. " + "retries: %d\n", retries); + return 0; + } + + usleep_range(2000, 2000); + } + + dev_err(&client->dev, + "wrote 0x%x to offset 0x%x error %d\n", val, offset, r); + + return r; +} diff --git a/drivers/media/i2c/smiapp/smiapp-regs.h b/drivers/media/i2c/smiapp/smiapp-regs.h new file mode 100644 index 000000000000..7f9013b47971 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp-regs.h @@ -0,0 +1,49 @@ +/* + * include/media/smiapp/smiapp-regs.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2011--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef SMIAPP_REGS_H +#define SMIAPP_REGS_H + +#include <linux/i2c.h> +#include <linux/types.h> + +/* Use upper 8 bits of the type field for flags */ +#define SMIA_REG_FLAG_FLOAT (1 << 24) + +#define SMIA_REG_8BIT 1 +#define SMIA_REG_16BIT 2 +#define SMIA_REG_32BIT 4 +struct smia_reg { + u16 type; + u16 reg; /* 16-bit offset */ + u32 val; /* 8/16/32-bit value */ +}; + +struct smiapp_sensor; + +int smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val); +int smiapp_read_8only(struct smiapp_sensor *sensor, u32 reg, u32 *val); +int smiapp_write(struct smiapp_sensor *sensor, u32 reg, u32 val); + +#endif diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h new file mode 100644 index 000000000000..4182a695ab53 --- /dev/null +++ b/drivers/media/i2c/smiapp/smiapp.h @@ -0,0 +1,252 @@ +/* + * drivers/media/i2c/smiapp/smiapp.h + * + * Generic driver for SMIA/SMIA++ compliant camera modules + * + * Copyright (C) 2010--2012 Nokia Corporation + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __SMIAPP_PRIV_H_ +#define __SMIAPP_PRIV_H_ + +#include <linux/mutex.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> +#include <media/smiapp.h> + +#include "smiapp-pll.h" +#include "smiapp-reg.h" +#include "smiapp-regs.h" +#include "smiapp-quirk.h" + +/* + * Standard SMIA++ constants + */ +#define SMIA_VERSION_1 10 +#define SMIAPP_VERSION_0_8 8 /* Draft 0.8 */ +#define SMIAPP_VERSION_0_9 9 /* Draft 0.9 */ +#define SMIAPP_VERSION_1 10 + +#define SMIAPP_PROFILE_0 0 +#define SMIAPP_PROFILE_1 1 +#define SMIAPP_PROFILE_2 2 + +#define SMIAPP_NVM_PAGE_SIZE 64 /* bytes */ + +#define SMIAPP_RESET_DELAY_CLOCKS 2400 +#define SMIAPP_RESET_DELAY(clk) \ + (1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \ + + (clk) / 1000 - 1) / ((clk) / 1000)) + +#include "smiapp-limits.h" + +struct smiapp_quirk; + +#define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0) + +struct smiapp_module_ident { + u8 manufacturer_id; + u16 model_id; + u8 revision_number_major; + + u8 flags; + + char *name; + const struct smiapp_quirk *quirk; +}; + +struct smiapp_module_info { + u32 manufacturer_id; + u32 model_id; + u32 revision_number_major; + u32 revision_number_minor; + + u32 module_year; + u32 module_month; + u32 module_day; + + u32 sensor_manufacturer_id; + u32 sensor_model_id; + u32 sensor_revision_number; + u32 sensor_firmware_version; + + u32 smia_version; + u32 smiapp_version; + + u32 smiapp_profile; + + char *name; + const struct smiapp_quirk *quirk; +}; + +#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = fl, \ + .name = _name, \ + .quirk = _quirk, } + +#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ + .name = _name, \ + .quirk = _quirk, } + +#define SMIAPP_IDENT_L(manufacturer, model, rev, _name) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \ + .name = _name, } + +#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = 0, \ + .name = _name, \ + .quirk = _quirk, } + +#define SMIAPP_IDENT(manufacturer, model, rev, _name) \ + { .manufacturer_id = manufacturer, \ + .model_id = model, \ + .revision_number_major = rev, \ + .flags = 0, \ + .name = _name, } + +struct smiapp_reg_limits { + u32 addr; + char *what; +}; + +extern struct smiapp_reg_limits smiapp_reg_limits[]; + +struct smiapp_csi_data_format { + u32 code; + u8 width; + u8 compressed; + u8 pixel_order; +}; + +#define SMIAPP_SUBDEVS 3 + +#define SMIAPP_PA_PAD_SRC 0 +#define SMIAPP_PAD_SINK 0 +#define SMIAPP_PAD_SRC 1 +#define SMIAPP_PADS 2 + +struct smiapp_binning_subtype { + u8 horizontal:4; + u8 vertical:4; +} __packed; + +struct smiapp_subdev { + struct v4l2_subdev sd; + struct media_pad pads[2]; + struct v4l2_rect sink_fmt; + struct v4l2_rect crop[2]; + struct v4l2_rect compose; /* compose on sink */ + unsigned short sink_pad; + unsigned short source_pad; + int npads; + struct smiapp_sensor *sensor; + struct v4l2_ctrl_handler ctrl_handler; +}; + +/* + * struct smiapp_sensor - Main device structure + */ +struct smiapp_sensor { + /* + * "mutex" is used to serialise access to all fields here + * except v4l2_ctrls at the end of the struct. "mutex" is also + * used to serialise access to file handle specific + * information. The exception to this rule is the power_mutex + * below. + */ + struct mutex mutex; + /* + * power_mutex is used to serialise power management related + * activities. Acquiring "mutex" at that time isn't necessary + * since there are no other users anyway. + */ + struct mutex power_mutex; + struct smiapp_subdev ssds[SMIAPP_SUBDEVS]; + u32 ssds_used; + struct smiapp_subdev *src; + struct smiapp_subdev *binner; + struct smiapp_subdev *scaler; + struct smiapp_subdev *pixel_array; + struct smiapp_platform_data *platform_data; + struct regulator *vana; + struct clk *ext_clk; + u32 limits[SMIAPP_LIMIT_LAST]; + u8 nbinning_subtypes; + struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES]; + u32 mbus_frame_fmts; + const struct smiapp_csi_data_format *csi_format; + const struct smiapp_csi_data_format *internal_csi_format; + u32 default_mbus_frame_fmts; + int default_pixel_order; + + u8 binning_horizontal; + u8 binning_vertical; + + u8 scale_m; + u8 scaling_mode; + + u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */ + u8 flash_capability; + u8 frame_skip; + + int power_count; + + bool streaming; + bool dev_init_done; + + u8 *nvm; /* nvm memory buffer */ + unsigned int nvm_size; /* bytes */ + + struct smiapp_module_info minfo; + + struct smiapp_pll pll; + + /* Pixel array controls */ + struct v4l2_ctrl *analog_gain; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *vblank; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *pixel_rate_parray; + /* src controls */ + struct v4l2_ctrl *link_freq; + struct v4l2_ctrl *pixel_rate_csi; +}; + +#define to_smiapp_subdev(_sd) \ + container_of(_sd, struct smiapp_subdev, sd) + +#define to_smiapp_sensor(_sd) \ + (to_smiapp_subdev(_sd)->sensor) + +#endif /* __SMIAPP_PRIV_H_ */ diff --git a/drivers/media/i2c/sr030pc30.c b/drivers/media/i2c/sr030pc30.c new file mode 100644 index 000000000000..e9d95bda2ab1 --- /dev/null +++ b/drivers/media/i2c/sr030pc30.c @@ -0,0 +1,871 @@ +/* + * Driver for SiliconFile SR030PC30 VGA (1/10-Inch) Image Sensor with ISP + * + * Copyright (C) 2010 Samsung Electronics Co., Ltd + * Author: Sylwester Nawrocki, s.nawrocki@samsung.com + * + * Based on original driver authored by Dongsoo Nathaniel Kim + * and HeungJun Kim <riverful.kim@samsung.com>. + * + * Based on mt9v011 Micron Digital Image Sensor driver + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-mediabus.h> +#include <media/sr030pc30.h> + +static int debug; +module_param(debug, int, 0644); + +#define MODULE_NAME "SR030PC30" + +/* + * Register offsets within a page + * b15..b8 - page id, b7..b0 - register address + */ +#define POWER_CTRL_REG 0x0001 +#define PAGEMODE_REG 0x03 +#define DEVICE_ID_REG 0x0004 +#define NOON010PC30_ID 0x86 +#define SR030PC30_ID 0x8C +#define VDO_CTL1_REG 0x0010 +#define SUBSAMPL_NONE_VGA 0 +#define SUBSAMPL_QVGA 0x10 +#define SUBSAMPL_QQVGA 0x20 +#define VDO_CTL2_REG 0x0011 +#define SYNC_CTL_REG 0x0012 +#define WIN_ROWH_REG 0x0020 +#define WIN_ROWL_REG 0x0021 +#define WIN_COLH_REG 0x0022 +#define WIN_COLL_REG 0x0023 +#define WIN_HEIGHTH_REG 0x0024 +#define WIN_HEIGHTL_REG 0x0025 +#define WIN_WIDTHH_REG 0x0026 +#define WIN_WIDTHL_REG 0x0027 +#define HBLANKH_REG 0x0040 +#define HBLANKL_REG 0x0041 +#define VSYNCH_REG 0x0042 +#define VSYNCL_REG 0x0043 +/* page 10 */ +#define ISP_CTL_REG(n) (0x1010 + (n)) +#define YOFS_REG 0x1040 +#define DARK_YOFS_REG 0x1041 +#define AG_ABRTH_REG 0x1050 +#define SAT_CTL_REG 0x1060 +#define BSAT_REG 0x1061 +#define RSAT_REG 0x1062 +#define AG_SAT_TH_REG 0x1063 +/* page 11 */ +#define ZLPF_CTRL_REG 0x1110 +#define ZLPF_CTRL2_REG 0x1112 +#define ZLPF_AGH_THR_REG 0x1121 +#define ZLPF_THR_REG 0x1160 +#define ZLPF_DYN_THR_REG 0x1160 +/* page 12 */ +#define YCLPF_CTL1_REG 0x1240 +#define YCLPF_CTL2_REG 0x1241 +#define YCLPF_THR_REG 0x1250 +#define BLPF_CTL_REG 0x1270 +#define BLPF_THR1_REG 0x1274 +#define BLPF_THR2_REG 0x1275 +/* page 14 - Lens Shading Compensation */ +#define LENS_CTRL_REG 0x1410 +#define LENS_XCEN_REG 0x1420 +#define LENS_YCEN_REG 0x1421 +#define LENS_R_COMP_REG 0x1422 +#define LENS_G_COMP_REG 0x1423 +#define LENS_B_COMP_REG 0x1424 +/* page 15 - Color correction */ +#define CMC_CTL_REG 0x1510 +#define CMC_OFSGH_REG 0x1514 +#define CMC_OFSGL_REG 0x1516 +#define CMC_SIGN_REG 0x1517 +/* Color correction coefficients */ +#define CMC_COEF_REG(n) (0x1530 + (n)) +/* Color correction offset coefficients */ +#define CMC_OFS_REG(n) (0x1540 + (n)) +/* page 16 - Gamma correction */ +#define GMA_CTL_REG 0x1610 +/* Gamma correction coefficients 0.14 */ +#define GMA_COEF_REG(n) (0x1630 + (n)) +/* page 20 - Auto Exposure */ +#define AE_CTL1_REG 0x2010 +#define AE_CTL2_REG 0x2011 +#define AE_FRM_CTL_REG 0x2020 +#define AE_FINE_CTL_REG(n) (0x2028 + (n)) +#define EXP_TIMEH_REG 0x2083 +#define EXP_TIMEM_REG 0x2084 +#define EXP_TIMEL_REG 0x2085 +#define EXP_MMINH_REG 0x2086 +#define EXP_MMINL_REG 0x2087 +#define EXP_MMAXH_REG 0x2088 +#define EXP_MMAXM_REG 0x2089 +#define EXP_MMAXL_REG 0x208A +/* page 22 - Auto White Balance */ +#define AWB_CTL1_REG 0x2210 +#define AWB_ENABLE 0x80 +#define AWB_CTL2_REG 0x2211 +#define MWB_ENABLE 0x01 +/* RGB gain control (manual WB) when AWB_CTL1[7]=0 */ +#define AWB_RGAIN_REG 0x2280 +#define AWB_GGAIN_REG 0x2281 +#define AWB_BGAIN_REG 0x2282 +#define AWB_RMAX_REG 0x2283 +#define AWB_RMIN_REG 0x2284 +#define AWB_BMAX_REG 0x2285 +#define AWB_BMIN_REG 0x2286 +/* R, B gain range in bright light conditions */ +#define AWB_RMAXB_REG 0x2287 +#define AWB_RMINB_REG 0x2288 +#define AWB_BMAXB_REG 0x2289 +#define AWB_BMINB_REG 0x228A +/* manual white balance, when AWB_CTL2[0]=1 */ +#define MWB_RGAIN_REG 0x22B2 +#define MWB_BGAIN_REG 0x22B3 +/* the token to mark an array end */ +#define REG_TERM 0xFFFF + +/* Minimum and maximum exposure time in ms */ +#define EXPOS_MIN_MS 1 +#define EXPOS_MAX_MS 125 + +struct sr030pc30_info { + struct v4l2_subdev sd; + const struct sr030pc30_platform_data *pdata; + const struct sr030pc30_format *curr_fmt; + const struct sr030pc30_frmsize *curr_win; + unsigned int auto_wb:1; + unsigned int auto_exp:1; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int sleep:1; + unsigned int exposure; + u8 blue_balance; + u8 red_balance; + u8 i2c_reg_page; +}; + +struct sr030pc30_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u16 ispctl1_reg; +}; + +struct sr030pc30_frmsize { + u16 width; + u16 height; + int vid_ctl1; +}; + +struct i2c_regval { + u16 addr; + u16 val; +}; + +static const struct v4l2_queryctrl sr030pc30_ctrl[] = { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto White Balance", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 64, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 64, + }, { + .id = V4L2_CID_EXPOSURE_AUTO, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Auto Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = EXPOS_MIN_MS, + .maximum = EXPOS_MAX_MS, + .step = 1, + .default_value = 1, + }, { + } +}; + +/* supported resolutions */ +static const struct sr030pc30_frmsize sr030pc30_sizes[] = { + { + .width = 640, + .height = 480, + .vid_ctl1 = SUBSAMPL_NONE_VGA, + }, { + .width = 320, + .height = 240, + .vid_ctl1 = SUBSAMPL_QVGA, + }, { + .width = 160, + .height = 120, + .vid_ctl1 = SUBSAMPL_QQVGA, + }, +}; + +/* supported pixel formats */ +static const struct sr030pc30_format sr030pc30_formats[] = { + { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x03, + }, { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x02, + }, { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0, + }, { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x01, + }, { + .code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x40, + }, +}; + +static const struct i2c_regval sr030pc30_base_regs[] = { + /* Window size and position within pixel matrix */ + { WIN_ROWH_REG, 0x00 }, { WIN_ROWL_REG, 0x06 }, + { WIN_COLH_REG, 0x00 }, { WIN_COLL_REG, 0x06 }, + { WIN_HEIGHTH_REG, 0x01 }, { WIN_HEIGHTL_REG, 0xE0 }, + { WIN_WIDTHH_REG, 0x02 }, { WIN_WIDTHL_REG, 0x80 }, + { HBLANKH_REG, 0x01 }, { HBLANKL_REG, 0x50 }, + { VSYNCH_REG, 0x00 }, { VSYNCL_REG, 0x14 }, + { SYNC_CTL_REG, 0 }, + /* Color corection and saturation */ + { ISP_CTL_REG(0), 0x30 }, { YOFS_REG, 0x80 }, + { DARK_YOFS_REG, 0x04 }, { AG_ABRTH_REG, 0x78 }, + { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, + { AG_SAT_TH_REG, 0xF0 }, { 0x1064, 0x80 }, + { CMC_CTL_REG, 0x03 }, { CMC_OFSGH_REG, 0x3C }, + { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x2F }, + { CMC_COEF_REG(0), 0xCB }, { CMC_OFS_REG(0), 0x87 }, + { CMC_COEF_REG(1), 0x61 }, { CMC_OFS_REG(1), 0x18 }, + { CMC_COEF_REG(2), 0x16 }, { CMC_OFS_REG(2), 0x91 }, + { CMC_COEF_REG(3), 0x23 }, { CMC_OFS_REG(3), 0x94 }, + { CMC_COEF_REG(4), 0xCE }, { CMC_OFS_REG(4), 0x9f }, + { CMC_COEF_REG(5), 0x2B }, { CMC_OFS_REG(5), 0x33 }, + { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x00 }, + { CMC_COEF_REG(7), 0x34 }, { CMC_OFS_REG(7), 0x94 }, + { CMC_COEF_REG(8), 0x75 }, { CMC_OFS_REG(8), 0x14 }, + /* Color corection coefficients */ + { GMA_CTL_REG, 0x03 }, { GMA_COEF_REG(0), 0x00 }, + { GMA_COEF_REG(1), 0x19 }, { GMA_COEF_REG(2), 0x26 }, + { GMA_COEF_REG(3), 0x3B }, { GMA_COEF_REG(4), 0x5D }, + { GMA_COEF_REG(5), 0x79 }, { GMA_COEF_REG(6), 0x8E }, + { GMA_COEF_REG(7), 0x9F }, { GMA_COEF_REG(8), 0xAF }, + { GMA_COEF_REG(9), 0xBD }, { GMA_COEF_REG(10), 0xCA }, + { GMA_COEF_REG(11), 0xDD }, { GMA_COEF_REG(12), 0xEC }, + { GMA_COEF_REG(13), 0xF7 }, { GMA_COEF_REG(14), 0xFF }, + /* Noise reduction, Z-LPF, YC-LPF and BLPF filters setup */ + { ZLPF_CTRL_REG, 0x99 }, { ZLPF_CTRL2_REG, 0x0E }, + { ZLPF_AGH_THR_REG, 0x29 }, { ZLPF_THR_REG, 0x0F }, + { ZLPF_DYN_THR_REG, 0x63 }, { YCLPF_CTL1_REG, 0x23 }, + { YCLPF_CTL2_REG, 0x3B }, { YCLPF_THR_REG, 0x05 }, + { BLPF_CTL_REG, 0x1D }, { BLPF_THR1_REG, 0x05 }, + { BLPF_THR2_REG, 0x04 }, + /* Automatic white balance */ + { AWB_CTL1_REG, 0xFB }, { AWB_CTL2_REG, 0x26 }, + { AWB_RMAX_REG, 0x54 }, { AWB_RMIN_REG, 0x2B }, + { AWB_BMAX_REG, 0x57 }, { AWB_BMIN_REG, 0x29 }, + { AWB_RMAXB_REG, 0x50 }, { AWB_RMINB_REG, 0x43 }, + { AWB_BMAXB_REG, 0x30 }, { AWB_BMINB_REG, 0x22 }, + /* Auto exposure */ + { AE_CTL1_REG, 0x8C }, { AE_CTL2_REG, 0x04 }, + { AE_FRM_CTL_REG, 0x01 }, { AE_FINE_CTL_REG(0), 0x3F }, + { AE_FINE_CTL_REG(1), 0xA3 }, { AE_FINE_CTL_REG(3), 0x34 }, + /* Lens shading compensation */ + { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, + { LENS_YCEN_REG, 0x70 }, { LENS_R_COMP_REG, 0x53 }, + { LENS_G_COMP_REG, 0x40 }, { LENS_B_COMP_REG, 0x3e }, + { REG_TERM, 0 }, +}; + +static inline struct sr030pc30_info *to_sr030pc30(struct v4l2_subdev *sd) +{ + return container_of(sd, struct sr030pc30_info, sd); +} + +static inline int set_i2c_page(struct sr030pc30_info *info, + struct i2c_client *client, unsigned int reg) +{ + int ret = 0; + u32 page = reg >> 8 & 0xFF; + + if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { + ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); + if (!ret) + info->i2c_reg_page = page; + } + return ret; +} + +static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct sr030pc30_info *info = to_sr030pc30(sd); + + int ret = set_i2c_page(info, client, reg_addr); + if (!ret) + ret = i2c_smbus_read_byte_data(client, reg_addr & 0xFF); + return ret; +} + +static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct sr030pc30_info *info = to_sr030pc30(sd); + + int ret = set_i2c_page(info, client, reg_addr); + if (!ret) + ret = i2c_smbus_write_byte_data( + client, reg_addr & 0xFF, val); + return ret; +} + +static inline int sr030pc30_bulk_write_reg(struct v4l2_subdev *sd, + const struct i2c_regval *msg) +{ + while (msg->addr != REG_TERM) { + int ret = cam_i2c_write(sd, msg->addr, msg->val); + if (ret) + return ret; + msg++; + } + return 0; +} + +/* Device reset and sleep mode control */ +static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd, + bool reset, bool sleep) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + u8 reg = sleep ? 0xF1 : 0xF0; + int ret = 0; + + if (reset) + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); + if (!ret) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); + if (!ret) { + info->sleep = sleep; + if (reset) + info->i2c_reg_page = -1; + } + } + return ret; +} + +static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + /* auto anti-flicker is also enabled here */ + int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C); + if (!ret) + info->auto_exp = on; + return ret; +} + +static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + unsigned long expos = value * info->pdata->clk_rate / (8 * 1000); + + int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF); + if (!ret) { /* Turn off AE */ + info->exposure = value; + ret = sr030pc30_enable_autoexposure(sd, 0); + } + return ret; +} + +/* Automatic white balance control */ +static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F); + if (!ret) + ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B); + if (!ret) + info->auto_wb = on; + + return ret; +} + +static int sr030pc30_set_flip(struct v4l2_subdev *sd) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + s32 reg = cam_i2c_read(sd, VDO_CTL2_REG); + if (reg < 0) + return reg; + + reg &= 0x7C; + if (info->hflip) + reg |= 0x01; + if (info->vflip) + reg |= 0x02; + return cam_i2c_write(sd, VDO_CTL2_REG, reg | 0x80); +} + +/* Configure resolution, color format and image flip */ +static int sr030pc30_set_params(struct v4l2_subdev *sd) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + int ret; + + if (!info->curr_win) + return -EINVAL; + + /* Configure the resolution through subsampling */ + ret = cam_i2c_write(sd, VDO_CTL1_REG, + info->curr_win->vid_ctl1); + + if (!ret && info->curr_fmt) + ret = cam_i2c_write(sd, ISP_CTL_REG(0), + info->curr_fmt->ispctl1_reg); + if (!ret) + ret = sr030pc30_set_flip(sd); + + return ret; +} + +/* Find nearest matching image pixel size. */ +static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(sr030pc30_sizes); + const struct sr030pc30_frmsize *fsize = &sr030pc30_sizes[0], + *match = NULL; + while (i--) { + int err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + return 0; + } + return -EINVAL; +} + +static int sr030pc30_queryctrl(struct v4l2_subdev *sd, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++) + if (qc->id == sr030pc30_ctrl[i].id) { + *qc = sr030pc30_ctrl[i]; + v4l2_dbg(1, debug, sd, "%s id: %d\n", + __func__, qc->id); + return 0; + } + + return -EINVAL; +} + +static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value) +{ + int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value); + if (!ret) + to_sr030pc30(sd)->blue_balance = value; + return ret; +} + +static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value) +{ + int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value); + if (!ret) + to_sr030pc30(sd)->red_balance = value; + return ret; +} + +static int sr030pc30_s_ctrl(struct v4l2_subdev *sd, + struct v4l2_control *ctrl) +{ + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++) + if (ctrl->id == sr030pc30_ctrl[i].id) + break; + + if (i == ARRAY_SIZE(sr030pc30_ctrl)) + return -EINVAL; + + if (ctrl->value < sr030pc30_ctrl[i].minimum || + ctrl->value > sr030pc30_ctrl[i].maximum) + return -ERANGE; + + v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", + __func__, ctrl->id, ctrl->value); + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + sr030pc30_enable_autowhitebalance(sd, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + ret = sr030pc30_set_bluebalance(sd, ctrl->value); + break; + case V4L2_CID_RED_BALANCE: + ret = sr030pc30_set_redbalance(sd, ctrl->value); + break; + case V4L2_CID_EXPOSURE_AUTO: + sr030pc30_enable_autoexposure(sd, + ctrl->value == V4L2_EXPOSURE_AUTO); + break; + case V4L2_CID_EXPOSURE: + ret = sr030pc30_set_exposure(sd, ctrl->value); + break; + default: + return -EINVAL; + } + + return ret; +} + +static int sr030pc30_g_ctrl(struct v4l2_subdev *sd, + struct v4l2_control *ctrl) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id); + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + ctrl->value = info->auto_wb; + break; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = info->blue_balance; + break; + case V4L2_CID_RED_BALANCE: + ctrl->value = info->red_balance; + break; + case V4L2_CID_EXPOSURE_AUTO: + ctrl->value = info->auto_exp; + break; + case V4L2_CID_EXPOSURE: + ctrl->value = info->exposure; + break; + default: + return -EINVAL; + } + return 0; +} + +static int sr030pc30_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (!code || index >= ARRAY_SIZE(sr030pc30_formats)) + return -EINVAL; + + *code = sr030pc30_formats[index].code; + return 0; +} + +static int sr030pc30_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + int ret; + + if (!mf) + return -EINVAL; + + if (!info->curr_win || !info->curr_fmt) { + ret = sr030pc30_set_params(sd); + if (ret) + return ret; + } + + mf->width = info->curr_win->width; + mf->height = info->curr_win->height; + mf->code = info->curr_fmt->code; + mf->colorspace = info->curr_fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +/* Return nearest media bus frame format. */ +static const struct sr030pc30_format *try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(sr030pc30_formats); + + sr030pc30_try_frame_size(mf); + + while (i--) + if (mf->code == sr030pc30_formats[i].code) + break; + + mf->code = sr030pc30_formats[i].code; + + return &sr030pc30_formats[i]; +} + +/* Return nearest media bus frame format. */ +static int sr030pc30_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + if (!sd || !mf) + return -EINVAL; + + try_fmt(sd, mf); + return 0; +} + +static int sr030pc30_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + + if (!sd || !mf) + return -EINVAL; + + info->curr_fmt = try_fmt(sd, mf); + + return sr030pc30_set_params(sd); +} + +static int sr030pc30_base_config(struct v4l2_subdev *sd) +{ + struct sr030pc30_info *info = to_sr030pc30(sd); + int ret; + unsigned long expmin, expmax; + + ret = sr030pc30_bulk_write_reg(sd, sr030pc30_base_regs); + if (!ret) { + info->curr_fmt = &sr030pc30_formats[0]; + info->curr_win = &sr030pc30_sizes[0]; + ret = sr030pc30_set_params(sd); + } + if (!ret) + ret = sr030pc30_pwr_ctrl(sd, false, false); + + if (!ret && !info->pdata) + return ret; + + expmin = EXPOS_MIN_MS * info->pdata->clk_rate / (8 * 1000); + expmax = EXPOS_MAX_MS * info->pdata->clk_rate / (8 * 1000); + + v4l2_dbg(1, debug, sd, "%s: expmin= %lx, expmax= %lx", __func__, + expmin, expmax); + + /* Setting up manual exposure time range */ + ret = cam_i2c_write(sd, EXP_MMINH_REG, expmin >> 8 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMINL_REG, expmin & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMAXH_REG, expmax >> 16 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMAXM_REG, expmax >> 8 & 0xFF); + if (!ret) + ret = cam_i2c_write(sd, EXP_MMAXL_REG, expmax & 0xFF); + + return ret; +} + +static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct sr030pc30_info *info = to_sr030pc30(sd); + const struct sr030pc30_platform_data *pdata = info->pdata; + int ret; + + if (pdata == NULL) { + WARN(1, "No platform data!\n"); + return -EINVAL; + } + + /* + * Put sensor into power sleep mode before switching off + * power and disabling MCLK. + */ + if (!on) + sr030pc30_pwr_ctrl(sd, false, true); + + /* set_power controls sensor's power and clock */ + if (pdata->set_power) { + ret = pdata->set_power(&client->dev, on); + if (ret) + return ret; + } + + if (on) { + ret = sr030pc30_base_config(sd); + } else { + ret = 0; + info->curr_win = NULL; + info->curr_fmt = NULL; + } + + return ret; +} + +static const struct v4l2_subdev_core_ops sr030pc30_core_ops = { + .s_power = sr030pc30_s_power, + .queryctrl = sr030pc30_queryctrl, + .s_ctrl = sr030pc30_s_ctrl, + .g_ctrl = sr030pc30_g_ctrl, +}; + +static const struct v4l2_subdev_video_ops sr030pc30_video_ops = { + .g_mbus_fmt = sr030pc30_g_fmt, + .s_mbus_fmt = sr030pc30_s_fmt, + .try_mbus_fmt = sr030pc30_try_fmt, + .enum_mbus_fmt = sr030pc30_enum_fmt, +}; + +static const struct v4l2_subdev_ops sr030pc30_ops = { + .core = &sr030pc30_core_ops, + .video = &sr030pc30_video_ops, +}; + +/* + * Detect sensor type. Return 0 if SR030PC30 was detected + * or -ENODEV otherwise. + */ +static int sr030pc30_detect(struct i2c_client *client) +{ + const struct sr030pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + + /* Enable sensor's power and clock */ + if (pdata->set_power) { + ret = pdata->set_power(&client->dev, 1); + if (ret) + return ret; + } + + ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); + + if (pdata->set_power) + pdata->set_power(&client->dev, 0); + + if (ret < 0) { + dev_err(&client->dev, "%s: I2C read failed\n", __func__); + return ret; + } + + return ret == SR030PC30_ID ? 0 : -ENODEV; +} + + +static int sr030pc30_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sr030pc30_info *info; + struct v4l2_subdev *sd; + const struct sr030pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + + if (!pdata) { + dev_err(&client->dev, "No platform data!"); + return -EIO; + } + + ret = sr030pc30_detect(client); + if (ret) + return ret; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + sd = &info->sd; + strcpy(sd->name, MODULE_NAME); + info->pdata = client->dev.platform_data; + + v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops); + + info->i2c_reg_page = -1; + info->hflip = 1; + info->auto_exp = 1; + info->exposure = 30; + + return 0; +} + +static int sr030pc30_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct sr030pc30_info *info = to_sr030pc30(sd); + + v4l2_device_unregister_subdev(sd); + kfree(info); + return 0; +} + +static const struct i2c_device_id sr030pc30_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sr030pc30_id); + + +static struct i2c_driver sr030pc30_i2c_driver = { + .driver = { + .name = MODULE_NAME + }, + .probe = sr030pc30_probe, + .remove = sr030pc30_remove, + .id_table = sr030pc30_id, +}; + +module_i2c_driver(sr030pc30_i2c_driver); + +MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/tcm825x.c b/drivers/media/i2c/tcm825x.c new file mode 100644 index 000000000000..9252529fc5dd --- /dev/null +++ b/drivers/media/i2c/tcm825x.c @@ -0,0 +1,937 @@ +/* + * drivers/media/i2c/tcm825x.c + * + * TCM825X camera sensor driver. + * + * Copyright (C) 2007 Nokia Corporation. + * + * Contact: Sakari Ailus <sakari.ailus@nokia.com> + * + * Based on code from David Cohen <david.cohen@indt.org.br> + * + * This driver was based on ov9640 sensor driver from MontaVista + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <media/v4l2-int-device.h> + +#include "tcm825x.h" + +/* + * The sensor has two fps modes: the lower one just gives half the fps + * at the same xclk than the high one. + */ +#define MAX_FPS 30 +#define MIN_FPS 8 +#define MAX_HALF_FPS (MAX_FPS / 2) +#define HIGH_FPS_MODE_LOWER_LIMIT 14 +#define DEFAULT_FPS MAX_HALF_FPS + +struct tcm825x_sensor { + const struct tcm825x_platform_data *platform_data; + struct v4l2_int_device *v4l2_int_device; + struct i2c_client *i2c_client; + struct v4l2_pix_format pix; + struct v4l2_fract timeperframe; +}; + +/* list of image formats supported by TCM825X sensor */ +static const struct v4l2_fmtdesc tcm825x_formats[] = { + { + .description = "YUYV (YUV 4:2:2), packed", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, { + /* Note: V4L2 defines RGB565 as: + * + * Byte 0 Byte 1 + * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3 + * + * We interpret RGB565 as: + * + * Byte 0 Byte 1 + * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3 + */ + .description = "RGB565, le", + .pixelformat = V4L2_PIX_FMT_RGB565, + }, +}; + +#define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats) + +/* + * TCM825X register configuration for all combinations of pixel format and + * image size + */ +static const struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ }; +static const struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ }; +static const struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ }; +static const struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ }; +static const struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ }; +static const struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ }; + +static const struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT }; +static const struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT }; + +/* Our own specific controls */ +#define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE +#define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1 +#define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2 +#define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3 +#define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4 +#define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME + +/* Video controls */ +static struct vcontrol { + struct v4l2_queryctrl qc; + u16 reg; + u16 start_bit; +} video_control[] = { + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 63, + .step = 1, + }, + .reg = TCM825X_AG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 255, + .step = 1, + }, + .reg = TCM825X_MRG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 255, + .step = 1, + }, + .reg = TCM825X_MBG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto White Balance", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_AWBSW, + .start_bit = 7, + }, + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure Time", + .minimum = 0, + .maximum = 0x1fff, + .step = 1, + }, + .reg = TCM825X_ESRSPD_U, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror Image", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_H_INV, + .start_bit = 6, + }, + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vertical Flip", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_V_INV, + .start_bit = 7, + }, + /* Private controls */ + { + { + .id = V4L2_CID_ALC, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Luminance Control", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_ALCSW, + .start_bit = 7, + }, + { + { + .id = V4L2_CID_H_EDGE_EN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Horizontal Edge Enhancement", + .minimum = 0, + .maximum = 0xff, + .step = 1, + }, + .reg = TCM825X_HDTG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_V_EDGE_EN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Vertical Edge Enhancement", + .minimum = 0, + .maximum = 0xff, + .step = 1, + }, + .reg = TCM825X_VDTG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_LENS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Lens Shading Compensation", + .minimum = 0, + .maximum = 0x3f, + .step = 1, + }, + .reg = TCM825X_LENS, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_MAX_EXPOSURE_TIME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Maximum Exposure Time", + .minimum = 0, + .maximum = 0x3, + .step = 1, + }, + .reg = TCM825X_ESRLIM, + .start_bit = 5, + }, +}; + + +static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] = +{ &subqcif, &qqvga, &qcif, &qvga, &cif, &vga }; + +static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] = +{ &yuv422, &rgb565 }; + +/* + * Read a value from a register in an TCM825X sensor device. The value is + * returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_read_reg(struct i2c_client *client, int reg) +{ + int err; + struct i2c_msg msg[2]; + u8 reg_buf, data_buf = 0; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = ®_buf; + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 1; + msg[1].buf = &data_buf; + + reg_buf = reg; + + err = i2c_transfer(client->adapter, msg, 2); + if (err < 0) + return err; + return data_buf; +} + +/* + * Write a value to a register in an TCM825X sensor device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int err; + struct i2c_msg msg[1]; + unsigned char data[2]; + + if (!client->adapter) + return -ENODEV; + + msg->addr = client->addr; + msg->flags = 0; + msg->len = 2; + msg->buf = data; + data[0] = reg; + data[1] = val; + err = i2c_transfer(client->adapter, msg, 1); + if (err >= 0) + return 0; + return err; +} + +static int __tcm825x_write_reg_mask(struct i2c_client *client, + u8 reg, u8 val, u8 mask) +{ + int rc; + + /* need to do read - modify - write */ + rc = tcm825x_read_reg(client, reg); + if (rc < 0) + return rc; + + rc &= (~mask); /* Clear the masked bits */ + val &= mask; /* Enforce mask on value */ + val |= rc; + + /* write the new value to the register */ + rc = tcm825x_write_reg(client, reg, val); + if (rc) + return rc; + + return 0; +} + +#define tcm825x_write_reg_mask(client, regmask, val) \ + __tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \ + TCM825X_MASK((regmask))) + + +/* + * Initialize a list of TCM825X registers. + * The list of registers is terminated by the pair of values + * { TCM825X_REG_TERM, TCM825X_VAL_TERM }. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_write_default_regs(struct i2c_client *client, + const struct tcm825x_reg *reglist) +{ + int err; + const struct tcm825x_reg *next = reglist; + + while (!((next->reg == TCM825X_REG_TERM) + && (next->val == TCM825X_VAL_TERM))) { + err = tcm825x_write_reg(client, next->reg, next->val); + if (err) { + dev_err(&client->dev, "register writing failed\n"); + return err; + } + next++; + } + + return 0; +} + +static struct vcontrol *find_vctrl(int id) +{ + int i; + + if (id < V4L2_CID_BASE) + return NULL; + + for (i = 0; i < ARRAY_SIZE(video_control); i++) + if (video_control[i].qc.id == id) + return &video_control[i]; + + return NULL; +} + +/* + * Find the best match for a requested image capture size. The best match + * is chosen as the nearest match that has the same number or fewer pixels + * as the requested size, or the smallest image size if the requested size + * has fewer pixels than the smallest image. + */ +static enum image_size tcm825x_find_size(struct v4l2_int_device *s, + unsigned int width, + unsigned int height) +{ + enum image_size isize; + unsigned long pixels = width * height; + struct tcm825x_sensor *sensor = s->priv; + + for (isize = subQCIF; isize < VGA; isize++) { + if (tcm825x_sizes[isize + 1].height + * tcm825x_sizes[isize + 1].width > pixels) { + dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize); + + return isize; + } + } + + dev_dbg(&sensor->i2c_client->dev, "format default VGA\n"); + + return VGA; +} + +/* + * Configure the TCM825X for current image size, pixel format, and + * frame period. fper is the frame period (in seconds) expressed as a + * fraction. Returns zero if successful, or non-zero otherwise. The + * actual frame period is returned in fper. + */ +static int tcm825x_configure(struct v4l2_int_device *s) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_pix_format *pix = &sensor->pix; + enum image_size isize = tcm825x_find_size(s, pix->width, pix->height); + struct v4l2_fract *fper = &sensor->timeperframe; + enum pixel_format pfmt; + int err; + u32 tgt_fps; + u8 val; + + /* common register initialization */ + err = tcm825x_write_default_regs( + sensor->i2c_client, sensor->platform_data->default_regs()); + if (err) + return err; + + /* configure image size */ + val = tcm825x_siz_reg[isize]->val; + dev_dbg(&sensor->i2c_client->dev, + "configuring image size %d\n", isize); + err = tcm825x_write_reg_mask(sensor->i2c_client, + tcm825x_siz_reg[isize]->reg, val); + if (err) + return err; + + /* configure pixel format */ + switch (pix->pixelformat) { + default: + case V4L2_PIX_FMT_RGB565: + pfmt = RGB565; + break; + case V4L2_PIX_FMT_UYVY: + pfmt = YUV422; + break; + } + + dev_dbg(&sensor->i2c_client->dev, + "configuring pixel format %d\n", pfmt); + val = tcm825x_fmt_reg[pfmt]->val; + + err = tcm825x_write_reg_mask(sensor->i2c_client, + tcm825x_fmt_reg[pfmt]->reg, val); + if (err) + return err; + + /* + * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be + * set. Frame rate will be halved from the normal. + */ + tgt_fps = fper->denominator / fper->numerator; + if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) { + val = tcm825x_read_reg(sensor->i2c_client, 0x02); + val |= 0x80; + tcm825x_write_reg(sensor->i2c_client, 0x02, val); + } + + return 0; +} + +static int ioctl_queryctrl(struct v4l2_int_device *s, + struct v4l2_queryctrl *qc) +{ + struct vcontrol *control; + + control = find_vctrl(qc->id); + + if (control == NULL) + return -EINVAL; + + *qc = control->qc; + + return 0; +} + +static int ioctl_g_ctrl(struct v4l2_int_device *s, + struct v4l2_control *vc) +{ + struct tcm825x_sensor *sensor = s->priv; + struct i2c_client *client = sensor->i2c_client; + int val, r; + struct vcontrol *lvc; + + /* exposure time is special, spread across 2 registers */ + if (vc->id == V4L2_CID_EXPOSURE) { + int val_lower, val_upper; + + val_upper = tcm825x_read_reg(client, + TCM825X_ADDR(TCM825X_ESRSPD_U)); + if (val_upper < 0) + return val_upper; + val_lower = tcm825x_read_reg(client, + TCM825X_ADDR(TCM825X_ESRSPD_L)); + if (val_lower < 0) + return val_lower; + + vc->value = ((val_upper & 0x1f) << 8) | (val_lower); + return 0; + } + + lvc = find_vctrl(vc->id); + if (lvc == NULL) + return -EINVAL; + + r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg)); + if (r < 0) + return r; + val = r & TCM825X_MASK(lvc->reg); + val >>= lvc->start_bit; + + if (val < 0) + return val; + + if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) + val ^= sensor->platform_data->is_upside_down(); + + vc->value = val; + return 0; +} + +static int ioctl_s_ctrl(struct v4l2_int_device *s, + struct v4l2_control *vc) +{ + struct tcm825x_sensor *sensor = s->priv; + struct i2c_client *client = sensor->i2c_client; + struct vcontrol *lvc; + int val = vc->value; + + /* exposure time is special, spread across 2 registers */ + if (vc->id == V4L2_CID_EXPOSURE) { + int val_lower, val_upper; + val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L); + val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U); + + if (tcm825x_write_reg_mask(client, + TCM825X_ESRSPD_U, val_upper)) + return -EIO; + + if (tcm825x_write_reg_mask(client, + TCM825X_ESRSPD_L, val_lower)) + return -EIO; + + return 0; + } + + lvc = find_vctrl(vc->id); + if (lvc == NULL) + return -EINVAL; + + if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP) + val ^= sensor->platform_data->is_upside_down(); + + val = val << lvc->start_bit; + if (tcm825x_write_reg_mask(client, lvc->reg, val)) + return -EIO; + + return 0; +} + +static int ioctl_enum_fmt_cap(struct v4l2_int_device *s, + struct v4l2_fmtdesc *fmt) +{ + int index = fmt->index; + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (index >= TCM825X_NUM_CAPTURE_FORMATS) + return -EINVAL; + break; + + default: + return -EINVAL; + } + + fmt->flags = tcm825x_formats[index].flags; + strlcpy(fmt->description, tcm825x_formats[index].description, + sizeof(fmt->description)); + fmt->pixelformat = tcm825x_formats[index].pixelformat; + + return 0; +} + +static int ioctl_try_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + enum image_size isize; + int ifmt; + struct v4l2_pix_format *pix = &f->fmt.pix; + + isize = tcm825x_find_size(s, pix->width, pix->height); + dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n", + isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS); + + pix->width = tcm825x_sizes[isize].width; + pix->height = tcm825x_sizes[isize].height; + + for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++) + if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat) + break; + + if (ifmt == TCM825X_NUM_CAPTURE_FORMATS) + ifmt = 0; /* Default = YUV 4:2:2 */ + + pix->pixelformat = tcm825x_formats[ifmt].pixelformat; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL; + pix->sizeimage = pix->bytesperline * pix->height; + pix->priv = 0; + dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n", + pix->pixelformat); + + switch (pix->pixelformat) { + case V4L2_PIX_FMT_UYVY: + default: + pix->colorspace = V4L2_COLORSPACE_JPEG; + break; + case V4L2_PIX_FMT_RGB565: + pix->colorspace = V4L2_COLORSPACE_SRGB; + break; + } + + return 0; +} + +static int ioctl_s_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_pix_format *pix = &f->fmt.pix; + int rval; + + rval = ioctl_try_fmt_cap(s, f); + if (rval) + return rval; + + rval = tcm825x_configure(s); + + sensor->pix = *pix; + + return rval; +} + +static int ioctl_g_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + + f->fmt.pix = sensor->pix; + + return 0; +} + +static int ioctl_g_parm(struct v4l2_int_device *s, + struct v4l2_streamparm *a) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_captureparm *cparm = &a->parm.capture; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + cparm->capability = V4L2_CAP_TIMEPERFRAME; + cparm->timeperframe = sensor->timeperframe; + + return 0; +} + +static int ioctl_s_parm(struct v4l2_int_device *s, + struct v4l2_streamparm *a) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe; + u32 tgt_fps; /* target frames per secound */ + int rval; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if ((timeperframe->numerator == 0) + || (timeperframe->denominator == 0)) { + timeperframe->denominator = DEFAULT_FPS; + timeperframe->numerator = 1; + } + + tgt_fps = timeperframe->denominator / timeperframe->numerator; + + if (tgt_fps > MAX_FPS) { + timeperframe->denominator = MAX_FPS; + timeperframe->numerator = 1; + } else if (tgt_fps < MIN_FPS) { + timeperframe->denominator = MIN_FPS; + timeperframe->numerator = 1; + } + + sensor->timeperframe = *timeperframe; + + rval = tcm825x_configure(s); + + return rval; +} + +static int ioctl_s_power(struct v4l2_int_device *s, int on) +{ + struct tcm825x_sensor *sensor = s->priv; + + return sensor->platform_data->power_set(on); +} + +/* + * Given the image capture format in pix, the nominal frame period in + * timeperframe, calculate the required xclk frequency. + * + * TCM825X input frequency characteristics are: + * Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz + */ + +static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_fract *timeperframe = &sensor->timeperframe; + u32 tgt_xclk; /* target xclk */ + u32 tgt_fps; /* target frames per secound */ + int rval; + + rval = sensor->platform_data->ifparm(p); + if (rval) + return rval; + + tgt_fps = timeperframe->denominator / timeperframe->numerator; + + tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ? + (2457 * tgt_fps) / MAX_HALF_FPS : + (2457 * tgt_fps) / MAX_FPS; + tgt_xclk *= 10000; + + tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX); + tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN); + + p->u.bt656.clock_curr = tgt_xclk; + + return 0; +} + +static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf) +{ + struct tcm825x_sensor *sensor = s->priv; + + return sensor->platform_data->needs_reset(s, buf, &sensor->pix); +} + +static int ioctl_reset(struct v4l2_int_device *s) +{ + return -EBUSY; +} + +static int ioctl_init(struct v4l2_int_device *s) +{ + return tcm825x_configure(s); +} + +static int ioctl_dev_exit(struct v4l2_int_device *s) +{ + return 0; +} + +static int ioctl_dev_init(struct v4l2_int_device *s) +{ + struct tcm825x_sensor *sensor = s->priv; + int r; + + r = tcm825x_read_reg(sensor->i2c_client, 0x01); + if (r < 0) + return r; + if (r == 0) { + dev_err(&sensor->i2c_client->dev, "device not detected\n"); + return -EIO; + } + return 0; +} + +static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = { + { vidioc_int_dev_init_num, + (v4l2_int_ioctl_func *)ioctl_dev_init }, + { vidioc_int_dev_exit_num, + (v4l2_int_ioctl_func *)ioctl_dev_exit }, + { vidioc_int_s_power_num, + (v4l2_int_ioctl_func *)ioctl_s_power }, + { vidioc_int_g_ifparm_num, + (v4l2_int_ioctl_func *)ioctl_g_ifparm }, + { vidioc_int_g_needs_reset_num, + (v4l2_int_ioctl_func *)ioctl_g_needs_reset }, + { vidioc_int_reset_num, + (v4l2_int_ioctl_func *)ioctl_reset }, + { vidioc_int_init_num, + (v4l2_int_ioctl_func *)ioctl_init }, + { vidioc_int_enum_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap }, + { vidioc_int_try_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_try_fmt_cap }, + { vidioc_int_g_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_g_fmt_cap }, + { vidioc_int_s_fmt_cap_num, + (v4l2_int_ioctl_func *)ioctl_s_fmt_cap }, + { vidioc_int_g_parm_num, + (v4l2_int_ioctl_func *)ioctl_g_parm }, + { vidioc_int_s_parm_num, + (v4l2_int_ioctl_func *)ioctl_s_parm }, + { vidioc_int_queryctrl_num, + (v4l2_int_ioctl_func *)ioctl_queryctrl }, + { vidioc_int_g_ctrl_num, + (v4l2_int_ioctl_func *)ioctl_g_ctrl }, + { vidioc_int_s_ctrl_num, + (v4l2_int_ioctl_func *)ioctl_s_ctrl }, +}; + +static struct v4l2_int_slave tcm825x_slave = { + .ioctls = tcm825x_ioctl_desc, + .num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc), +}; + +static struct tcm825x_sensor tcm825x; + +static struct v4l2_int_device tcm825x_int_device = { + .module = THIS_MODULE, + .name = TCM825X_NAME, + .priv = &tcm825x, + .type = v4l2_int_type_slave, + .u = { + .slave = &tcm825x_slave, + }, +}; + +static int tcm825x_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct tcm825x_sensor *sensor = &tcm825x; + + if (i2c_get_clientdata(client)) + return -EBUSY; + + sensor->platform_data = client->dev.platform_data; + + if (sensor->platform_data == NULL + || !sensor->platform_data->is_okay()) + return -ENODEV; + + sensor->v4l2_int_device = &tcm825x_int_device; + + sensor->i2c_client = client; + i2c_set_clientdata(client, sensor); + + /* Make the default capture format QVGA RGB565 */ + sensor->pix.width = tcm825x_sizes[QVGA].width; + sensor->pix.height = tcm825x_sizes[QVGA].height; + sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565; + + return v4l2_int_device_register(sensor->v4l2_int_device); +} + +static int tcm825x_remove(struct i2c_client *client) +{ + struct tcm825x_sensor *sensor = i2c_get_clientdata(client); + + if (!client->adapter) + return -ENODEV; /* our client isn't attached */ + + v4l2_int_device_unregister(sensor->v4l2_int_device); + + return 0; +} + +static const struct i2c_device_id tcm825x_id[] = { + { "tcm825x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tcm825x_id); + +static struct i2c_driver tcm825x_i2c_driver = { + .driver = { + .name = TCM825X_NAME, + }, + .probe = tcm825x_probe, + .remove = tcm825x_remove, + .id_table = tcm825x_id, +}; + +static struct tcm825x_sensor tcm825x = { + .timeperframe = { + .numerator = 1, + .denominator = DEFAULT_FPS, + }, +}; + +static int __init tcm825x_init(void) +{ + int rval; + + rval = i2c_add_driver(&tcm825x_i2c_driver); + if (rval) + printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n", + __func__); + + return rval; +} + +static void __exit tcm825x_exit(void) +{ + i2c_del_driver(&tcm825x_i2c_driver); +} + +/* + * FIXME: Menelaus isn't ready (?) at module_init stage, so use + * late_initcall for now. + */ +late_initcall(tcm825x_init); +module_exit(tcm825x_exit); + +MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); +MODULE_DESCRIPTION("TCM825x camera sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/tcm825x.h b/drivers/media/i2c/tcm825x.h new file mode 100644 index 000000000000..8ebab953963f --- /dev/null +++ b/drivers/media/i2c/tcm825x.h @@ -0,0 +1,200 @@ +/* + * drivers/media/i2c/tcm825x.h + * + * Register definitions for the TCM825X CameraChip. + * + * Author: David Cohen (david.cohen@indt.org.br) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + * This file was based on ov9640.h from MontaVista + */ + +#ifndef TCM825X_H +#define TCM825X_H + +#include <linux/videodev2.h> + +#include <media/v4l2-int-device.h> + +#define TCM825X_NAME "tcm825x" + +#define TCM825X_MASK(x) x & 0x00ff +#define TCM825X_ADDR(x) (x & 0xff00) >> 8 + +/* The TCM825X I2C sensor chip has a fixed slave address of 0x3d. */ +#define TCM825X_I2C_ADDR 0x3d + +/* + * define register offsets for the TCM825X sensor chip + * OFFSET(8 bits) + MASK(8 bits) + * MASK bit 4 and 3 are used when the register uses more than one address + */ +#define TCM825X_FPS 0x0280 +#define TCM825X_ACF 0x0240 +#define TCM825X_DOUTBUF 0x020C +#define TCM825X_DCLKP 0x0202 +#define TCM825X_ACFDET 0x0201 +#define TCM825X_DOUTSW 0x0380 +#define TCM825X_DATAHZ 0x0340 +#define TCM825X_PICSIZ 0x033c +#define TCM825X_PICFMT 0x0302 +#define TCM825X_V_INV 0x0480 +#define TCM825X_H_INV 0x0440 +#define TCM825X_ESRLSW 0x0430 +#define TCM825X_V_LENGTH 0x040F +#define TCM825X_ALCSW 0x0580 +#define TCM825X_ESRLIM 0x0560 +#define TCM825X_ESRSPD_U 0x051F +#define TCM825X_ESRSPD_L 0x06FF +#define TCM825X_AG 0x07FF +#define TCM825X_ESRSPD2 0x06FF +#define TCM825X_ALCMODE 0x0830 +#define TCM825X_ALCH 0x080F +#define TCM825X_ALCL 0x09FF +#define TCM825X_AWBSW 0x0A80 +#define TCM825X_MRG 0x0BFF +#define TCM825X_MBG 0x0CFF +#define TCM825X_GAMSW 0x0D80 +#define TCM825X_HDTG 0x0EFF +#define TCM825X_VDTG 0x0FFF +#define TCM825X_HDTCORE 0x10F0 +#define TCM825X_VDTCORE 0x100F +#define TCM825X_CONT 0x11FF +#define TCM825X_BRIGHT 0x12FF +#define TCM825X_VHUE 0x137F +#define TCM825X_UHUE 0x147F +#define TCM825X_VGAIN 0x153F +#define TCM825X_UGAIN 0x163F +#define TCM825X_UVCORE 0x170F +#define TCM825X_SATU 0x187F +#define TCM825X_MHMODE 0x1980 +#define TCM825X_MHLPFSEL 0x1940 +#define TCM825X_YMODE 0x1930 +#define TCM825X_MIXHG 0x1907 +#define TCM825X_LENS 0x1A3F +#define TCM825X_AGLIM 0x1BE0 +#define TCM825X_LENSRPOL 0x1B10 +#define TCM825X_LENSRGAIN 0x1B0F +#define TCM825X_ES100S 0x1CFF +#define TCM825X_ES120S 0x1DFF +#define TCM825X_DMASK 0x1EC0 +#define TCM825X_CODESW 0x1E20 +#define TCM825X_CODESEL 0x1E10 +#define TCM825X_TESPIC 0x1E04 +#define TCM825X_PICSEL 0x1E03 +#define TCM825X_HNUM 0x20FF +#define TCM825X_VOUTPH 0x287F +#define TCM825X_ESROUT 0x327F +#define TCM825X_ESROUT2 0x33FF +#define TCM825X_AGOUT 0x34FF +#define TCM825X_DGOUT 0x353F +#define TCM825X_AGSLOW1 0x39C0 +#define TCM825X_FLLSMODE 0x3930 +#define TCM825X_FLLSLIM 0x390F +#define TCM825X_DETSEL 0x3AF0 +#define TCM825X_ACDETNC 0x3A0F +#define TCM825X_AGSLOW2 0x3BC0 +#define TCM825X_DG 0x3B3F +#define TCM825X_REJHLEV 0x3CFF +#define TCM825X_ALCLOCK 0x3D80 +#define TCM825X_FPSLNKSW 0x3D40 +#define TCM825X_ALCSPD 0x3D30 +#define TCM825X_REJH 0x3D03 +#define TCM825X_SHESRSW 0x3E80 +#define TCM825X_ESLIMSEL 0x3E40 +#define TCM825X_SHESRSPD 0x3E30 +#define TCM825X_ELSTEP 0x3E0C +#define TCM825X_ELSTART 0x3E03 +#define TCM825X_AGMIN 0x3FFF +#define TCM825X_PREGRG 0x423F +#define TCM825X_PREGBG 0x433F +#define TCM825X_PRERG 0x443F +#define TCM825X_PREBG 0x453F +#define TCM825X_MSKBR 0x477F +#define TCM825X_MSKGR 0x487F +#define TCM825X_MSKRB 0x497F +#define TCM825X_MSKGB 0x4A7F +#define TCM825X_MSKRG 0x4B7F +#define TCM825X_MSKBG 0x4C7F +#define TCM825X_HDTCSW 0x4D80 +#define TCM825X_VDTCSW 0x4D40 +#define TCM825X_DTCYL 0x4D3F +#define TCM825X_HDTPSW 0x4E80 +#define TCM825X_VDTPSW 0x4E40 +#define TCM825X_DTCGAIN 0x4E3F +#define TCM825X_DTLLIMSW 0x4F10 +#define TCM825X_DTLYLIM 0x4F0F +#define TCM825X_YLCUTLMSK 0x5080 +#define TCM825X_YLCUTL 0x503F +#define TCM825X_YLCUTHMSK 0x5180 +#define TCM825X_YLCUTH 0x513F +#define TCM825X_UVSKNC 0x527F +#define TCM825X_UVLJ 0x537F +#define TCM825X_WBGMIN 0x54FF +#define TCM825X_WBGMAX 0x55FF +#define TCM825X_WBSPDUP 0x5603 +#define TCM825X_ALLAREA 0x5820 +#define TCM825X_WBLOCK 0x5810 +#define TCM825X_WB2SP 0x580F +#define TCM825X_KIZUSW 0x5920 +#define TCM825X_PBRSW 0x5910 +#define TCM825X_ABCSW 0x5903 +#define TCM825X_PBDLV 0x5AFF +#define TCM825X_PBC1LV 0x5BFF + +#define TCM825X_NUM_REGS (TCM825X_ADDR(TCM825X_PBC1LV) + 1) + +#define TCM825X_BYTES_PER_PIXEL 2 + +#define TCM825X_REG_TERM 0xff /* terminating list entry for reg */ +#define TCM825X_VAL_TERM 0xff /* terminating list entry for val */ + +/* define a structure for tcm825x register initialization values */ +struct tcm825x_reg { + u8 val; + u16 reg; +}; + +enum image_size { subQCIF = 0, QQVGA, QCIF, QVGA, CIF, VGA }; +enum pixel_format { YUV422 = 0, RGB565 }; +#define NUM_IMAGE_SIZES 6 +#define NUM_PIXEL_FORMATS 2 + +#define TCM825X_XCLK_MIN 11900000 +#define TCM825X_XCLK_MAX 25000000 + +struct capture_size { + unsigned long width; + unsigned long height; +}; + +struct tcm825x_platform_data { + /* Is the sensor usable? Doesn't yet mean it's there, but you + * can try! */ + int (*is_okay)(void); + /* Set power state, zero is off, non-zero is on. */ + int (*power_set)(int power); + /* Default registers written after power-on or reset. */ + const struct tcm825x_reg *(*default_regs)(void); + int (*needs_reset)(struct v4l2_int_device *s, void *buf, + struct v4l2_pix_format *fmt); + int (*ifparm)(struct v4l2_ifparm *p); + int (*is_upside_down)(void); +}; + +/* Array of image sizes supported by TCM825X. These must be ordered from + * smallest image size to largest. + */ +static const struct capture_size tcm825x_sizes[] = { + { 128, 96 }, /* subQCIF */ + { 160, 120 }, /* QQVGA */ + { 176, 144 }, /* QCIF */ + { 320, 240 }, /* QVGA */ + { 352, 288 }, /* CIF */ + { 640, 480 }, /* VGA */ +}; + +#endif /* ifndef TCM825X_H */ diff --git a/drivers/media/i2c/tda7432.c b/drivers/media/i2c/tda7432.c new file mode 100644 index 000000000000..f7707e65761e --- /dev/null +++ b/drivers/media/i2c/tda7432.c @@ -0,0 +1,485 @@ +/* + * For the STS-Thompson TDA7432 audio processor chip + * + * Handles audio functions: volume, balance, tone, loudness + * This driver will not complain if used with any + * other i2c device with the same address. + * + * Muting and tone control by Jonathan Isom <jisom@ematic.com> + * + * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com> + * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> + * This code is placed under the terms of the GNU General Public License + * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) + * Which was based on tda8425.c by Greg Alexander (c) 1998 + * + * OPTIONS: + * debug - set to 1 if you'd like to see debug messages + * set to 2 if you'd like to be inundated with debug messages + * + * loudness - set between 0 and 15 for varying degrees of loudness effect + * + * maxvol - set maximium volume to +20db (1), default is 0db(0) + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/i2c.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/i2c-addr.h> + +#ifndef VIDEO_AUDIO_BALANCE +# define VIDEO_AUDIO_BALANCE 32 +#endif + +MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>"); +MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip"); +MODULE_LICENSE("GPL"); + +static int maxvol; +static int loudness; /* disable loudness by default */ +static int debug; /* insmod parameter */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0)."); +module_param(loudness, int, S_IRUGO); +MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0)."); +module_param(maxvol, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0)."); + + +/* Structure of address and subaddresses for the tda7432 */ + +struct tda7432 { + struct v4l2_subdev sd; + int addr; + int input; + int volume; + int muted; + int bass, treble; + int lf, lr, rf, rr; + int loud; +}; + +static inline struct tda7432 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tda7432, sd); +} + +/* The TDA7432 is made by STS-Thompson + * http://www.st.com + * http://us.st.com/stonline/books/pdf/docs/4056.pdf + * + * TDA7432: I2C-bus controlled basic audio processor + * + * The TDA7432 controls basic audio functions like volume, balance, + * and tone control (including loudness). It also has four channel + * output (for front and rear). Since most vidcap cards probably + * don't have 4 channel output, this driver will set front & rear + * together (no independent control). + */ + + /* Subaddresses for TDA7432 */ + +#define TDA7432_IN 0x00 /* Input select */ +#define TDA7432_VL 0x01 /* Volume */ +#define TDA7432_TN 0x02 /* Bass, Treble (Tone) */ +#define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */ +#define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */ +#define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */ +#define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */ +#define TDA7432_LD 0x07 /* Loudness */ + + + /* Masks for bits in TDA7432 subaddresses */ + +/* Many of these not used - just for documentation */ + +/* Subaddress 0x00 - Input selection and bass control */ + +/* Bits 0,1,2 control input: + * 0x00 - Stereo input + * 0x02 - Mono input + * 0x03 - Mute (Using Attenuators Plays better with modules) + * Mono probably isn't used - I'm guessing only the stereo + * input is connected on most cards, so we'll set it to stereo. + * + * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut + * Bit 4 controls bass range: 0/1 is extended/standard bass range + * + * Highest 3 bits not used + */ + +#define TDA7432_STEREO_IN 0 +#define TDA7432_MONO_IN 2 /* Probably won't be used */ +#define TDA7432_BASS_SYM 1 << 3 +#define TDA7432_BASS_NORM 1 << 4 + +/* Subaddress 0x01 - Volume */ + +/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps + * Recommended maximum is +20 dB + * + * +32dB: 0x00 + * +20dB: 0x0c + * 0dB: 0x20 + * -79dB: 0x6f + * + * MSB (bit 7) controls loudness: 1/0 is loudness on/off + */ + +#define TDA7432_VOL_0DB 0x20 +#define TDA7432_LD_ON 1 << 7 + + +/* Subaddress 0x02 - Tone control */ + +/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB + * 0x0 is 14dB, 0x7 is 0dB + * + * Bit 3 controls treble attenuation/gain (sign) + * 1 = gain (+) + * 0 = attenuation (-) + * + * Bits 4,5,6 control absolute bass gain from 0dB to 14dB + * (This is only true for normal base range, set in 0x00) + * 0x0 << 4 is 14dB, 0x7 is 0dB + * + * Bit 7 controls bass attenuation/gain (sign) + * 1 << 7 = gain (+) + * 0 << 7 = attenuation (-) + * + * Example: + * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble + */ + +#define TDA7432_TREBLE_0DB 0xf +#define TDA7432_TREBLE 7 +#define TDA7432_TREBLE_GAIN 1 << 3 +#define TDA7432_BASS_0DB 0xf +#define TDA7432_BASS 7 << 4 +#define TDA7432_BASS_GAIN 1 << 7 + + +/* Subaddress 0x03 - Left Front attenuation */ +/* Subaddress 0x04 - Left Rear attenuation */ +/* Subaddress 0x05 - Right Front attenuation */ +/* Subaddress 0x06 - Right Rear attenuation */ + +/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB + * in 1.5dB steps. + * + * 0x00 is 0dB + * 0x1f is -37.5dB + * + * Bit 5 mutes that channel when set (1 = mute, 0 = unmute) + * We'll use the mute on the input, though (above) + * Bits 6,7 unused + */ + +#define TDA7432_ATTEN_0DB 0x00 +#define TDA7432_MUTE 0x1 << 5 + + +/* Subaddress 0x07 - Loudness Control */ + +/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps + * when bit 4 is NOT set + * + * 0x0 is 0dB + * 0xf is -15dB + * + * If bit 4 is set, then there is a flat attenuation according to + * the lower 4 bits, as above. + * + * Bits 5,6,7 unused + */ + + + +/* Begin code */ + +static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + + v4l2_dbg(2, debug, sd, "In tda7432_write\n"); + v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val); + buffer[0] = subaddr; + buffer[1] = val; + if (2 != i2c_master_send(client, buffer, 2)) { + v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n", + subaddr, val); + return -1; + } + return 0; +} + +static int tda7432_set(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tda7432 *t = to_state(sd); + unsigned char buf[16]; + + v4l2_dbg(1, debug, sd, + "tda7432: 7432_set(0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x)\n", + t->input, t->volume, t->bass, t->treble, t->lf, t->lr, + t->rf, t->rr, t->loud); + buf[0] = TDA7432_IN; + buf[1] = t->input; + buf[2] = t->volume; + buf[3] = t->bass; + buf[4] = t->treble; + buf[5] = t->lf; + buf[6] = t->lr; + buf[7] = t->rf; + buf[8] = t->rr; + buf[9] = t->loud; + if (10 != i2c_master_send(client, buf, 10)) { + v4l2_err(sd, "I/O error, trying tda7432_set\n"); + return -1; + } + + return 0; +} + +static void do_tda7432_init(struct v4l2_subdev *sd) +{ + struct tda7432 *t = to_state(sd); + + v4l2_dbg(2, debug, sd, "In tda7432_init\n"); + + t->input = TDA7432_STEREO_IN | /* Main (stereo) input */ + TDA7432_BASS_SYM | /* Symmetric bass cut */ + TDA7432_BASS_NORM; /* Normal bass range */ + t->volume = 0x3b ; /* -27dB Volume */ + if (loudness) /* Turn loudness on? */ + t->volume |= TDA7432_LD_ON; + t->muted = 1; + t->treble = TDA7432_TREBLE_0DB; /* 0dB Treble */ + t->bass = TDA7432_BASS_0DB; /* 0dB Bass */ + t->lf = TDA7432_ATTEN_0DB; /* 0dB attenuation */ + t->lr = TDA7432_ATTEN_0DB; /* 0dB attenuation */ + t->rf = TDA7432_ATTEN_0DB; /* 0dB attenuation */ + t->rr = TDA7432_ATTEN_0DB; /* 0dB attenuation */ + t->loud = loudness; /* insmod parameter */ + + tda7432_set(sd); +} + +static int tda7432_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct tda7432 *t = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + ctrl->value=t->muted; + return 0; + case V4L2_CID_AUDIO_VOLUME: + if (!maxvol){ /* max +20db */ + ctrl->value = ( 0x6f - (t->volume & 0x7F) ) * 630; + } else { /* max 0db */ + ctrl->value = ( 0x6f - (t->volume & 0x7F) ) * 829; + } + return 0; + case V4L2_CID_AUDIO_BALANCE: + { + if ( (t->lf) < (t->rf) ) + /* right is attenuated, balance shifted left */ + ctrl->value = (32768 - 1057*(t->rf)); + else + /* left is attenuated, balance shifted right */ + ctrl->value = (32768 + 1057*(t->lf)); + return 0; + } + case V4L2_CID_AUDIO_BASS: + { + /* Bass/treble 4 bits each */ + int bass=t->bass; + if(bass >= 0x8) + bass = ~(bass - 0x8) & 0xf; + ctrl->value = (bass << 12)+(bass << 8)+(bass << 4)+(bass); + return 0; + } + case V4L2_CID_AUDIO_TREBLE: + { + int treble=t->treble; + if(treble >= 0x8) + treble = ~(treble - 0x8) & 0xf; + ctrl->value = (treble << 12)+(treble << 8)+(treble << 4)+(treble); + return 0; + } + } + return -EINVAL; +} + +static int tda7432_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct tda7432 *t = to_state(sd); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + t->muted=ctrl->value; + break; + case V4L2_CID_AUDIO_VOLUME: + if(!maxvol){ /* max +20db */ + t->volume = 0x6f - ((ctrl->value)/630); + } else { /* max 0db */ + t->volume = 0x6f - ((ctrl->value)/829); + } + if (loudness) /* Turn on the loudness bit */ + t->volume |= TDA7432_LD_ON; + + tda7432_write(sd, TDA7432_VL, t->volume); + return 0; + case V4L2_CID_AUDIO_BALANCE: + if (ctrl->value < 32768) { + /* shifted to left, attenuate right */ + t->rr = (32768 - ctrl->value)/1057; + t->rf = t->rr; + t->lr = TDA7432_ATTEN_0DB; + t->lf = TDA7432_ATTEN_0DB; + } else if(ctrl->value > 32769) { + /* shifted to right, attenuate left */ + t->lf = (ctrl->value - 32768)/1057; + t->lr = t->lf; + t->rr = TDA7432_ATTEN_0DB; + t->rf = TDA7432_ATTEN_0DB; + } else { + /* centered */ + t->rr = TDA7432_ATTEN_0DB; + t->rf = TDA7432_ATTEN_0DB; + t->lf = TDA7432_ATTEN_0DB; + t->lr = TDA7432_ATTEN_0DB; + } + break; + case V4L2_CID_AUDIO_BASS: + t->bass = ctrl->value >> 12; + if(t->bass>= 0x8) + t->bass = (~t->bass & 0xf) + 0x8 ; + + tda7432_write(sd, TDA7432_TN, 0x10 | (t->bass << 4) | t->treble); + return 0; + case V4L2_CID_AUDIO_TREBLE: + t->treble= ctrl->value >> 12; + if(t->treble>= 0x8) + t->treble = (~t->treble & 0xf) + 0x8 ; + + tda7432_write(sd, TDA7432_TN, 0x10 | (t->bass << 4) | t->treble); + return 0; + default: + return -EINVAL; + } + + /* Used for both mute and balance changes */ + if (t->muted) + { + /* Mute & update balance*/ + tda7432_write(sd, TDA7432_LF, t->lf | TDA7432_MUTE); + tda7432_write(sd, TDA7432_LR, t->lr | TDA7432_MUTE); + tda7432_write(sd, TDA7432_RF, t->rf | TDA7432_MUTE); + tda7432_write(sd, TDA7432_RR, t->rr | TDA7432_MUTE); + } else { + tda7432_write(sd, TDA7432_LF, t->lf); + tda7432_write(sd, TDA7432_LR, t->lr); + tda7432_write(sd, TDA7432_RF, t->rf); + tda7432_write(sd, TDA7432_RR, t->rr); + } + return 0; +} + +static int tda7432_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) +{ + switch (qc->id) { + case V4L2_CID_AUDIO_VOLUME: + return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880); + case V4L2_CID_AUDIO_MUTE: + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); + } + return -EINVAL; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tda7432_core_ops = { + .queryctrl = tda7432_queryctrl, + .g_ctrl = tda7432_g_ctrl, + .s_ctrl = tda7432_s_ctrl, +}; + +static const struct v4l2_subdev_ops tda7432_ops = { + .core = &tda7432_core_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* *********************** * + * i2c interface functions * + * *********************** */ + +static int tda7432_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tda7432 *t; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + t = kzalloc(sizeof(*t), GFP_KERNEL); + if (!t) + return -ENOMEM; + sd = &t->sd; + v4l2_i2c_subdev_init(sd, client, &tda7432_ops); + if (loudness < 0 || loudness > 15) { + v4l2_warn(sd, "loudness parameter must be between 0 and 15\n"); + if (loudness < 0) + loudness = 0; + if (loudness > 15) + loudness = 15; + } + + do_tda7432_init(sd); + return 0; +} + +static int tda7432_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + do_tda7432_init(sd); + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id tda7432_id[] = { + { "tda7432", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tda7432_id); + +static struct i2c_driver tda7432_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tda7432", + }, + .probe = tda7432_probe, + .remove = tda7432_remove, + .id_table = tda7432_id, +}; + +module_i2c_driver(tda7432_driver); diff --git a/drivers/media/i2c/tda9840.c b/drivers/media/i2c/tda9840.c new file mode 100644 index 000000000000..3d7ddd93282d --- /dev/null +++ b/drivers/media/i2c/tda9840.c @@ -0,0 +1,224 @@ + /* + tda9840 - i2c-driver for the tda9840 by SGS Thomson + + Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + The tda9840 is a stereo/dual sound processor with digital + identification. It can be found at address 0x84 on the i2c-bus. + + For detailed informations download the specifications directly + from SGS Thomson at http://www.st.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/ioctl.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); +MODULE_DESCRIPTION("tda9840 driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define SWITCH 0x00 +#define LEVEL_ADJUST 0x02 +#define STEREO_ADJUST 0x03 +#define TEST 0x04 + +#define TDA9840_SET_MUTE 0x00 +#define TDA9840_SET_MONO 0x10 +#define TDA9840_SET_STEREO 0x2a +#define TDA9840_SET_LANG1 0x12 +#define TDA9840_SET_LANG2 0x1e +#define TDA9840_SET_BOTH 0x1a +#define TDA9840_SET_BOTH_R 0x16 +#define TDA9840_SET_EXTERNAL 0x7a + + +static void tda9840_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (i2c_smbus_write_byte_data(client, reg, val)) + v4l2_dbg(1, debug, sd, "error writing %02x to %02x\n", + val, reg); +} + +static int tda9840_status(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 byte; + + if (1 != i2c_master_recv(client, &byte, 1)) { + v4l2_dbg(1, debug, sd, + "i2c_master_recv() failed\n"); + return -EIO; + } + + if (byte & 0x80) { + v4l2_dbg(1, debug, sd, + "TDA9840_DETECT: register contents invalid\n"); + return -EINVAL; + } + + v4l2_dbg(1, debug, sd, "TDA9840_DETECT: byte: 0x%02x\n", byte); + return byte & 0x60; +} + +static int tda9840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t) +{ + int stat = tda9840_status(sd); + int byte; + + if (t->index) + return -EINVAL; + + stat = stat < 0 ? 0 : stat; + if (stat == 0 || stat == 0x60) /* mono input */ + byte = TDA9840_SET_MONO; + else if (stat == 0x40) /* stereo input */ + byte = (t->audmode == V4L2_TUNER_MODE_MONO) ? + TDA9840_SET_MONO : TDA9840_SET_STEREO; + else { /* bilingual */ + switch (t->audmode) { + case V4L2_TUNER_MODE_LANG1_LANG2: + byte = TDA9840_SET_BOTH; + break; + case V4L2_TUNER_MODE_LANG2: + byte = TDA9840_SET_LANG2; + break; + default: + byte = TDA9840_SET_LANG1; + break; + } + } + v4l2_dbg(1, debug, sd, "TDA9840_SWITCH: 0x%02x\n", byte); + tda9840_write(sd, SWITCH, byte); + return 0; +} + +static int tda9840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t) +{ + int stat = tda9840_status(sd); + + if (stat < 0) + return stat; + + t->rxsubchans = V4L2_TUNER_SUB_MONO; + + switch (stat & 0x60) { + case 0x00: + t->rxsubchans = V4L2_TUNER_SUB_MONO; + break; + case 0x20: + t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + break; + case 0x40: + t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + break; + default: /* Incorrect detect */ + t->rxsubchans = V4L2_TUNER_MODE_MONO; + break; + } + return 0; +} + +static int tda9840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TDA9840, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tda9840_core_ops = { + .g_chip_ident = tda9840_g_chip_ident, +}; + +static const struct v4l2_subdev_tuner_ops tda9840_tuner_ops = { + .s_tuner = tda9840_s_tuner, + .g_tuner = tda9840_g_tuner, +}; + +static const struct v4l2_subdev_ops tda9840_ops = { + .core = &tda9840_core_ops, + .tuner = &tda9840_tuner_ops, +}; + +/* ----------------------------------------------------------------------- */ + +static int tda9840_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &tda9840_ops); + + /* set initial values for level & stereo - adjustment, mode */ + tda9840_write(sd, LEVEL_ADJUST, 0); + tda9840_write(sd, STEREO_ADJUST, 0); + tda9840_write(sd, SWITCH, TDA9840_SET_STEREO); + return 0; +} + +static int tda9840_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id tda9840_id[] = { + { "tda9840", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tda9840_id); + +static struct i2c_driver tda9840_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tda9840", + }, + .probe = tda9840_probe, + .remove = tda9840_remove, + .id_table = tda9840_id, +}; + +module_i2c_driver(tda9840_driver); diff --git a/drivers/media/i2c/tea6415c.c b/drivers/media/i2c/tea6415c.c new file mode 100644 index 000000000000..d1d6ea1dd273 --- /dev/null +++ b/drivers/media/i2c/tea6415c.c @@ -0,0 +1,187 @@ + /* + tea6415c - i2c-driver for the tea6415c by SGS Thomson + + Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + The tea6415c is a bus controlled video-matrix-switch + with 8 inputs and 6 outputs. + It is cascadable, i.e. it can be found at the addresses + 0x86 and 0x06 on the i2c-bus. + + For detailed informations download the specifications directly + from SGS Thomson at http://www.st.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License vs published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/ioctl.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include "tea6415c.h" + +MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); +MODULE_DESCRIPTION("tea6415c driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* makes a connection between the input-pin 'i' and the output-pin 'o' */ +static int tea6415c_s_routing(struct v4l2_subdev *sd, + u32 i, u32 o, u32 config) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 byte = 0; + int ret; + + v4l2_dbg(1, debug, sd, "i=%d, o=%d\n", i, o); + + /* check if the pins are valid */ + if (0 == ((1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i) + && (18 == o || 17 == o || 16 == o || 15 == o || 14 == o || 13 == o))) + return -EINVAL; + + /* to understand this, have a look at the tea6415c-specs (p.5) */ + switch (o) { + case 18: + byte = 0x00; + break; + case 14: + byte = 0x20; + break; + case 16: + byte = 0x10; + break; + case 17: + byte = 0x08; + break; + case 15: + byte = 0x18; + break; + case 13: + byte = 0x28; + break; + }; + + switch (i) { + case 5: + byte |= 0x00; + break; + case 8: + byte |= 0x04; + break; + case 3: + byte |= 0x02; + break; + case 20: + byte |= 0x06; + break; + case 6: + byte |= 0x01; + break; + case 10: + byte |= 0x05; + break; + case 1: + byte |= 0x03; + break; + case 11: + byte |= 0x07; + break; + }; + + ret = i2c_smbus_write_byte(client, byte); + if (ret) { + v4l2_dbg(1, debug, sd, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); + return -EIO; + } + return ret; +} + +static int tea6415c_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEA6415C, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tea6415c_core_ops = { + .g_chip_ident = tea6415c_g_chip_ident, +}; + +static const struct v4l2_subdev_video_ops tea6415c_video_ops = { + .s_routing = tea6415c_s_routing, +}; + +static const struct v4l2_subdev_ops tea6415c_ops = { + .core = &tea6415c_core_ops, + .video = &tea6415c_video_ops, +}; + +static int tea6415c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &tea6415c_ops); + return 0; +} + +static int tea6415c_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id tea6415c_id[] = { + { "tea6415c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tea6415c_id); + +static struct i2c_driver tea6415c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tea6415c", + }, + .probe = tea6415c_probe, + .remove = tea6415c_remove, + .id_table = tea6415c_id, +}; + +module_i2c_driver(tea6415c_driver); diff --git a/drivers/media/i2c/tea6415c.h b/drivers/media/i2c/tea6415c.h new file mode 100644 index 000000000000..3a47d697536e --- /dev/null +++ b/drivers/media/i2c/tea6415c.h @@ -0,0 +1,27 @@ +#ifndef __INCLUDED_TEA6415C__ +#define __INCLUDED_TEA6415C__ + +/* the tea6415c's design is quite brain-dead. although there are + 8 inputs and 6 outputs, these aren't enumerated in any way. because + I don't want to say "connect input pin 20 to output pin 17", I define + a "virtual" pin-order. */ + +/* input pins */ +#define TEA6415C_OUTPUT1 18 +#define TEA6415C_OUTPUT2 14 +#define TEA6415C_OUTPUT3 16 +#define TEA6415C_OUTPUT4 17 +#define TEA6415C_OUTPUT5 13 +#define TEA6415C_OUTPUT6 15 + +/* output pins */ +#define TEA6415C_INPUT1 5 +#define TEA6415C_INPUT2 8 +#define TEA6415C_INPUT3 3 +#define TEA6415C_INPUT4 20 +#define TEA6415C_INPUT5 6 +#define TEA6415C_INPUT6 10 +#define TEA6415C_INPUT7 1 +#define TEA6415C_INPUT8 11 + +#endif diff --git a/drivers/media/i2c/tea6420.c b/drivers/media/i2c/tea6420.c new file mode 100644 index 000000000000..38757217a074 --- /dev/null +++ b/drivers/media/i2c/tea6420.c @@ -0,0 +1,169 @@ + /* + tea6420 - i2c-driver for the tea6420 by SGS Thomson + + Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, + 4 stereo outputs and gain control for each output. + It is cascadable, i.e. it can be found at the addresses 0x98 + and 0x9a on the i2c-bus. + + For detailed informations download the specifications directly + from SGS Thomson at http://www.st.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/ioctl.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include "tea6420.h" + +MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); +MODULE_DESCRIPTION("tea6420 driver"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* make a connection between the input 'i' and the output 'o' + with gain 'g' (note: i = 6 means 'mute') */ +static int tea6420_s_routing(struct v4l2_subdev *sd, + u32 i, u32 o, u32 config) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int g = (o >> 4) & 0xf; + u8 byte; + int ret; + + o &= 0xf; + v4l2_dbg(1, debug, sd, "i=%d, o=%d, g=%d\n", i, o, g); + + /* check if the parameters are valid */ + if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0) + return -EINVAL; + + byte = ((o - 1) << 5); + byte |= (i - 1); + + /* to understand this, have a look at the tea6420-specs (p.5) */ + switch (g) { + case 0: + byte |= (3 << 3); + break; + case 2: + byte |= (2 << 3); + break; + case 4: + byte |= (1 << 3); + break; + case 6: + break; + } + + ret = i2c_smbus_write_byte(client, byte); + if (ret) { + v4l2_dbg(1, debug, sd, + "i2c_smbus_write_byte() failed, ret:%d\n", ret); + return -EIO; + } + return 0; +} + +static int tea6420_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEA6420, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tea6420_core_ops = { + .g_chip_ident = tea6420_g_chip_ident, +}; + +static const struct v4l2_subdev_audio_ops tea6420_audio_ops = { + .s_routing = tea6420_s_routing, +}; + +static const struct v4l2_subdev_ops tea6420_ops = { + .core = &tea6420_core_ops, + .audio = &tea6420_audio_ops, +}; + +static int tea6420_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + int err, i; + + /* let's see whether this adapter can support what we need */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + v4l2_i2c_subdev_init(sd, client, &tea6420_ops); + + /* set initial values: set "mute"-input to all outputs at gain 0 */ + err = 0; + for (i = 1; i < 5; i++) + err += tea6420_s_routing(sd, 6, i, 0); + if (err) { + v4l_dbg(1, debug, client, "could not initialize tea6420\n"); + return -ENODEV; + } + return 0; +} + +static int tea6420_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + return 0; +} + +static const struct i2c_device_id tea6420_id[] = { + { "tea6420", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tea6420_id); + +static struct i2c_driver tea6420_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tea6420", + }, + .probe = tea6420_probe, + .remove = tea6420_remove, + .id_table = tea6420_id, +}; + +module_i2c_driver(tea6420_driver); diff --git a/drivers/media/i2c/tea6420.h b/drivers/media/i2c/tea6420.h new file mode 100644 index 000000000000..4aa3edb3e193 --- /dev/null +++ b/drivers/media/i2c/tea6420.h @@ -0,0 +1,24 @@ +#ifndef __INCLUDED_TEA6420__ +#define __INCLUDED_TEA6420__ + +/* input pins */ +#define TEA6420_OUTPUT1 1 +#define TEA6420_OUTPUT2 2 +#define TEA6420_OUTPUT3 3 +#define TEA6420_OUTPUT4 4 + +/* output pins */ +#define TEA6420_INPUT1 1 +#define TEA6420_INPUT2 2 +#define TEA6420_INPUT3 3 +#define TEA6420_INPUT4 4 +#define TEA6420_INPUT5 5 +#define TEA6420_INPUT6 6 + +/* gain on the output pins, ORed with the output pin */ +#define TEA6420_GAIN0 0x00 +#define TEA6420_GAIN2 0x20 +#define TEA6420_GAIN4 0x40 +#define TEA6420_GAIN6 0x60 + +#endif diff --git a/drivers/media/i2c/ths7303.c b/drivers/media/i2c/ths7303.c new file mode 100644 index 000000000000..e5c0eedebc58 --- /dev/null +++ b/drivers/media/i2c/ths7303.c @@ -0,0 +1,140 @@ +/* + * ths7303- THS7303 Video Amplifier driver + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ctype.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("TI THS7303 video amplifier driver"); +MODULE_AUTHOR("Chaithrika U S"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +/* following function is used to set ths7303 */ +static int ths7303_setvalue(struct v4l2_subdev *sd, v4l2_std_id std) +{ + int err = 0; + u8 val; + struct i2c_client *client; + + client = v4l2_get_subdevdata(sd); + + if (std & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) { + val = 0x02; + v4l2_dbg(1, debug, sd, "setting value for SDTV format\n"); + } else { + val = 0x00; + v4l2_dbg(1, debug, sd, "disabling all channels\n"); + } + + err |= i2c_smbus_write_byte_data(client, 0x01, val); + err |= i2c_smbus_write_byte_data(client, 0x02, val); + err |= i2c_smbus_write_byte_data(client, 0x03, val); + + if (err) + v4l2_err(sd, "write failed\n"); + + return err; +} + +static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + return ths7303_setvalue(sd, norm); +} + +static int ths7303_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_THS7303, 0); +} + +static const struct v4l2_subdev_video_ops ths7303_video_ops = { + .s_std_output = ths7303_s_std_output, +}; + +static const struct v4l2_subdev_core_ops ths7303_core_ops = { + .g_chip_ident = ths7303_g_chip_ident, +}; + +static const struct v4l2_subdev_ops ths7303_ops = { + .core = &ths7303_core_ops, + .video = &ths7303_video_ops, +}; + +static int ths7303_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + v4l2_std_id std_id = V4L2_STD_NTSC; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); + if (sd == NULL) + return -ENOMEM; + + v4l2_i2c_subdev_init(sd, client, &ths7303_ops); + + return ths7303_setvalue(sd, std_id); +} + +static int ths7303_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(sd); + + return 0; +} + +static const struct i2c_device_id ths7303_id[] = { + {"ths7303", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, ths7303_id); + +static struct i2c_driver ths7303_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "ths7303", + }, + .probe = ths7303_probe, + .remove = ths7303_remove, + .id_table = ths7303_id, +}; + +module_i2c_driver(ths7303_driver); diff --git a/drivers/media/i2c/tlv320aic23b.c b/drivers/media/i2c/tlv320aic23b.c new file mode 100644 index 000000000000..809a75a558ee --- /dev/null +++ b/drivers/media/i2c/tlv320aic23b.c @@ -0,0 +1,230 @@ +/* + * tlv320aic23b - driver version 0.0.1 + * + * Copyright (C) 2006 Scott Alfter <salfter@ssai.us> + * + * Based on wm8775 driver + * + * Copyright (C) 2004 Ulf Eklund <ivtv at eklund.to> + * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("tlv320aic23b driver"); +MODULE_AUTHOR("Scott Alfter, Ulf Eklund, Hans Verkuil"); +MODULE_LICENSE("GPL"); + + +/* ----------------------------------------------------------------------- */ + +struct tlv320aic23b_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct tlv320aic23b_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tlv320aic23b_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tlv320aic23b_state, hdl)->sd; +} + +static int tlv320aic23b_write(struct v4l2_subdev *sd, int reg, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + if ((reg < 0 || reg > 9) && (reg != 15)) { + v4l2_err(sd, "Invalid register R%d\n", reg); + return -1; + } + + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) + return 0; + v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static int tlv320aic23b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + switch (freq) { + case 32000: /* set sample rate to 32 kHz */ + tlv320aic23b_write(sd, 8, 0x018); + break; + case 44100: /* set sample rate to 44.1 kHz */ + tlv320aic23b_write(sd, 8, 0x022); + break; + case 48000: /* set sample rate to 48 kHz */ + tlv320aic23b_write(sd, 8, 0x000); + break; + default: + return -EINVAL; + } + return 0; +} + +static int tlv320aic23b_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + tlv320aic23b_write(sd, 0, 0x180); /* mute both channels */ + /* set gain on both channels to +3.0 dB */ + if (!ctrl->val) + tlv320aic23b_write(sd, 0, 0x119); + return 0; + } + return -EINVAL; +} + +static int tlv320aic23b_log_status(struct v4l2_subdev *sd) +{ + struct tlv320aic23b_state *state = to_state(sd); + + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tlv320aic23b_ctrl_ops = { + .s_ctrl = tlv320aic23b_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tlv320aic23b_core_ops = { + .log_status = tlv320aic23b_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_audio_ops tlv320aic23b_audio_ops = { + .s_clock_freq = tlv320aic23b_s_clock_freq, +}; + +static const struct v4l2_subdev_ops tlv320aic23b_ops = { + .core = &tlv320aic23b_core_ops, + .audio = &tlv320aic23b_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int tlv320aic23b_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tlv320aic23b_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct tlv320aic23b_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &tlv320aic23b_ops); + + /* Initialize tlv320aic23b */ + + /* RESET */ + tlv320aic23b_write(sd, 15, 0x000); + /* turn off DAC & mic input */ + tlv320aic23b_write(sd, 6, 0x00A); + /* left-justified, 24-bit, master mode */ + tlv320aic23b_write(sd, 7, 0x049); + /* set gain on both channels to +3.0 dB */ + tlv320aic23b_write(sd, 0, 0x119); + /* set sample rate to 48 kHz */ + tlv320aic23b_write(sd, 8, 0x000); + /* activate digital interface */ + tlv320aic23b_write(sd, 9, 0x001); + + v4l2_ctrl_handler_init(&state->hdl, 1); + v4l2_ctrl_new_std(&state->hdl, &tlv320aic23b_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + return 0; +} + +static int tlv320aic23b_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tlv320aic23b_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id tlv320aic23b_id[] = { + { "tlv320aic23b", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tlv320aic23b_id); + +static struct i2c_driver tlv320aic23b_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tlv320aic23b", + }, + .probe = tlv320aic23b_probe, + .remove = tlv320aic23b_remove, + .id_table = tlv320aic23b_id, +}; + +module_i2c_driver(tlv320aic23b_driver); diff --git a/drivers/media/i2c/tvaudio.c b/drivers/media/i2c/tvaudio.c new file mode 100644 index 000000000000..321b3153df87 --- /dev/null +++ b/drivers/media/i2c/tvaudio.c @@ -0,0 +1,2118 @@ +/* + * Driver for simple i2c audio chips. + * + * Copyright (c) 2000 Gerd Knorr + * based on code by: + * Eric Sandeen (eric_sandeen@bigfoot.com) + * Steve VanDeBogart (vandebo@uclink.berkeley.edu) + * Greg Alexander (galexand@acm.org) + * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * + * This code is placed under the terms of the GNU General Public License + * + * OPTIONS: + * debug - set to 1 if you'd like to see debug messages + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kthread.h> +#include <linux/freezer.h> + +#include <media/tvaudio.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +#include <media/i2c-addr.h> + +/* ---------------------------------------------------------------------- */ +/* insmod args */ + +static int debug; /* insmod parameter */ +module_param(debug, int, 0644); + +MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips"); +MODULE_AUTHOR("Eric Sandeen, Steve VanDeBogart, Greg Alexander, Gerd Knorr"); +MODULE_LICENSE("GPL"); + +#define UNSET (-1U) + +/* ---------------------------------------------------------------------- */ +/* our structs */ + +#define MAXREGS 256 + +struct CHIPSTATE; +typedef int (*getvalue)(int); +typedef int (*checkit)(struct CHIPSTATE*); +typedef int (*initialize)(struct CHIPSTATE*); +typedef int (*getrxsubchans)(struct CHIPSTATE *); +typedef void (*setaudmode)(struct CHIPSTATE*, int mode); + +/* i2c command */ +typedef struct AUDIOCMD { + int count; /* # of bytes to send */ + unsigned char bytes[MAXREGS+1]; /* addr, data, data, ... */ +} audiocmd; + +/* chip description */ +struct CHIPDESC { + char *name; /* chip name */ + int addr_lo, addr_hi; /* i2c address range */ + int registers; /* # of registers */ + + int *insmodopt; + checkit checkit; + initialize initialize; + int flags; +#define CHIP_HAS_VOLUME 1 +#define CHIP_HAS_BASSTREBLE 2 +#define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 + + /* various i2c command sequences */ + audiocmd init; + + /* which register has which value */ + int leftreg,rightreg,treblereg,bassreg; + + /* initialize with (defaults to 65535/65535/32768/32768 */ + int leftinit,rightinit,trebleinit,bassinit; + + /* functions to convert the values (v4l -> chip) */ + getvalue volfunc,treblefunc,bassfunc; + + /* get/set mode */ + getrxsubchans getrxsubchans; + setaudmode setaudmode; + + /* input switch register + values for v4l inputs */ + int inputreg; + int inputmap[4]; + int inputmute; + int inputmask; +}; + +/* current state of the chip */ +struct CHIPSTATE { + struct v4l2_subdev sd; + + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; + + /* shadow register set */ + audiocmd shadow; + + /* current settings */ + __u16 left, right, treble, bass, muted; + int prevmode; + int radio; + int input; + + /* thread */ + struct task_struct *thread; + struct timer_list wt; + int audmode; +}; + +static inline struct CHIPSTATE *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct CHIPSTATE, sd); +} + + +/* ---------------------------------------------------------------------- */ +/* i2c I/O functions */ + +static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + + if (subaddr < 0) { + v4l2_dbg(1, debug, sd, "chip_write: 0x%x\n", val); + chip->shadow.bytes[1] = val; + buffer[0] = val; + if (1 != i2c_master_send(c, buffer, 1)) { + v4l2_warn(sd, "I/O error (write 0x%x)\n", val); + return -1; + } + } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l2_info(sd, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + + v4l2_dbg(1, debug, sd, "chip_write: reg%d=0x%x\n", + subaddr, val); + chip->shadow.bytes[subaddr+1] = val; + buffer[0] = subaddr; + buffer[1] = val; + if (2 != i2c_master_send(c, buffer, 2)) { + v4l2_warn(sd, "I/O error (write reg%d=0x%x)\n", + subaddr, val); + return -1; + } + } + return 0; +} + +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) +{ + struct v4l2_subdev *sd = &chip->sd; + + if (mask != 0) { + if (subaddr < 0) { + val = (chip->shadow.bytes[1] & ~mask) | (val & mask); + } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l2_info(sd, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); + } + } + return chip_write(chip, subaddr, val); +} + +static int chip_read(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer; + + if (1 != i2c_master_recv(c, &buffer, 1)) { + v4l2_warn(sd, "I/O error (read)\n"); + return -1; + } + v4l2_dbg(1, debug, sd, "chip_read: 0x%x\n", buffer); + return buffer; +} + +static int chip_read2(struct CHIPSTATE *chip, int subaddr) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char write[1]; + unsigned char read[1]; + struct i2c_msg msgs[2] = { + { c->addr, 0, 1, write }, + { c->addr, I2C_M_RD, 1, read } + }; + + write[0] = subaddr; + + if (2 != i2c_transfer(c->adapter, msgs, 2)) { + v4l2_warn(sd, "I/O error (read2)\n"); + return -1; + } + v4l2_dbg(1, debug, sd, "chip_read2: reg%d=0x%x\n", + subaddr, read[0]); + return read[0]; +} + +static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) +{ + struct v4l2_subdev *sd = &chip->sd; + struct i2c_client *c = v4l2_get_subdevdata(sd); + int i; + + if (0 == cmd->count) + return 0; + + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l2_info(sd, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + + /* update our shadow register set; print bytes if (debug > 0) */ + v4l2_dbg(1, debug, sd, "chip_cmd(%s): reg=%d, data:", + name, cmd->bytes[0]); + for (i = 1; i < cmd->count; i++) { + if (debug) + printk(KERN_CONT " 0x%x", cmd->bytes[i]); + chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i]; + } + if (debug) + printk(KERN_CONT "\n"); + + /* send data to the chip */ + if (cmd->count != i2c_master_send(c, cmd->bytes, cmd->count)) { + v4l2_warn(sd, "I/O error (%s)\n", name); + return -1; + } + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* kernel thread for doing i2c stuff asyncronly + * right now it is used only to check the audio mode (mono/stereo/whatever) + * some time after switching to another TV channel, then turn on stereo + * if available, ... + */ + +static void chip_thread_wake(unsigned long data) +{ + struct CHIPSTATE *chip = (struct CHIPSTATE*)data; + wake_up_process(chip->thread); +} + +static int chip_thread(void *data) +{ + struct CHIPSTATE *chip = data; + struct CHIPDESC *desc = chip->desc; + struct v4l2_subdev *sd = &chip->sd; + int mode, selected; + + v4l2_dbg(1, debug, sd, "thread started\n"); + set_freezable(); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + if (!kthread_should_stop()) + schedule(); + set_current_state(TASK_RUNNING); + try_to_freeze(); + if (kthread_should_stop()) + break; + v4l2_dbg(1, debug, sd, "thread wakeup\n"); + + /* don't do anything for radio */ + if (chip->radio) + continue; + + /* have a look what's going on */ + mode = desc->getrxsubchans(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l2_dbg(1, debug, sd, "thread checkmode\n"); + + chip->prevmode = mode; + + selected = V4L2_TUNER_MODE_MONO; + switch (chip->audmode) { + case V4L2_TUNER_MODE_MONO: + if (mode & V4L2_TUNER_SUB_LANG1) + selected = V4L2_TUNER_MODE_LANG1; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + if (mode & V4L2_TUNER_SUB_LANG1) + selected = V4L2_TUNER_MODE_LANG1; + else if (mode & V4L2_TUNER_SUB_STEREO) + selected = V4L2_TUNER_MODE_STEREO; + break; + case V4L2_TUNER_MODE_LANG2: + if (mode & V4L2_TUNER_SUB_LANG2) + selected = V4L2_TUNER_MODE_LANG2; + else if (mode & V4L2_TUNER_SUB_STEREO) + selected = V4L2_TUNER_MODE_STEREO; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + if (mode & V4L2_TUNER_SUB_LANG2) + selected = V4L2_TUNER_MODE_LANG1_LANG2; + else if (mode & V4L2_TUNER_SUB_STEREO) + selected = V4L2_TUNER_MODE_STEREO; + } + desc->setaudmode(chip, selected); + + /* schedule next check */ + mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); + } + + v4l2_dbg(1, debug, sd, "thread exiting\n"); + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda9840 */ + +#define TDA9840_SW 0x00 +#define TDA9840_LVADJ 0x02 +#define TDA9840_STADJ 0x03 +#define TDA9840_TEST 0x04 + +#define TDA9840_MONO 0x10 +#define TDA9840_STEREO 0x2a +#define TDA9840_DUALA 0x12 +#define TDA9840_DUALB 0x1e +#define TDA9840_DUALAB 0x1a +#define TDA9840_DUALBA 0x16 +#define TDA9840_EXTERNAL 0x7a + +#define TDA9840_DS_DUAL 0x20 /* Dual sound identified */ +#define TDA9840_ST_STEREO 0x40 /* Stereo sound identified */ +#define TDA9840_PONRES 0x80 /* Power-on reset detected if = 1 */ + +#define TDA9840_TEST_INT1SN 0x1 /* Integration time 0.5s when set */ +#define TDA9840_TEST_INTFU 0x02 /* Disables integrator function */ + +static int tda9840_getrxsubchans(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int val, mode; + + val = chip_read(chip); + mode = V4L2_TUNER_SUB_MONO; + if (val & TDA9840_DS_DUAL) + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + if (val & TDA9840_ST_STEREO) + mode = V4L2_TUNER_SUB_STEREO; + + v4l2_dbg(1, debug, sd, + "tda9840_getrxsubchans(): raw chip read: %d, return: %d\n", + val, mode); + return mode; +} + +static void tda9840_setaudmode(struct CHIPSTATE *chip, int mode) +{ + int update = 1; + int t = chip->shadow.bytes[TDA9840_SW + 1] & ~0x7e; + + switch (mode) { + case V4L2_TUNER_MODE_MONO: + t |= TDA9840_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + t |= TDA9840_STEREO; + break; + case V4L2_TUNER_MODE_LANG1: + t |= TDA9840_DUALA; + break; + case V4L2_TUNER_MODE_LANG2: + t |= TDA9840_DUALB; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + t |= TDA9840_DUALAB; + break; + default: + update = 0; + } + + if (update) + chip_write(chip, TDA9840_SW, t); +} + +static int tda9840_checkit(struct CHIPSTATE *chip) +{ + int rc; + rc = chip_read(chip); + /* lower 5 bits should be 0 */ + return ((rc & 0x1f) == 0) ? 1 : 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda985x */ + +/* subaddresses for TDA9855 */ +#define TDA9855_VR 0x00 /* Volume, right */ +#define TDA9855_VL 0x01 /* Volume, left */ +#define TDA9855_BA 0x02 /* Bass */ +#define TDA9855_TR 0x03 /* Treble */ +#define TDA9855_SW 0x04 /* Subwoofer - not connected on DTV2000 */ + +/* subaddresses for TDA9850 */ +#define TDA9850_C4 0x04 /* Control 1 for TDA9850 */ + +/* subaddesses for both chips */ +#define TDA985x_C5 0x05 /* Control 2 for TDA9850, Control 1 for TDA9855 */ +#define TDA985x_C6 0x06 /* Control 3 for TDA9850, Control 2 for TDA9855 */ +#define TDA985x_C7 0x07 /* Control 4 for TDA9850, Control 3 for TDA9855 */ +#define TDA985x_A1 0x08 /* Alignment 1 for both chips */ +#define TDA985x_A2 0x09 /* Alignment 2 for both chips */ +#define TDA985x_A3 0x0a /* Alignment 3 for both chips */ + +/* Masks for bits in TDA9855 subaddresses */ +/* 0x00 - VR in TDA9855 */ +/* 0x01 - VL in TDA9855 */ +/* lower 7 bits control gain from -71dB (0x28) to 16dB (0x7f) + * in 1dB steps - mute is 0x27 */ + + +/* 0x02 - BA in TDA9855 */ +/* lower 5 bits control bass gain from -12dB (0x06) to 16.5dB (0x19) + * in .5dB steps - 0 is 0x0E */ + + +/* 0x03 - TR in TDA9855 */ +/* 4 bits << 1 control treble gain from -12dB (0x3) to 12dB (0xb) + * in 3dB steps - 0 is 0x7 */ + +/* Masks for bits in both chips' subaddresses */ +/* 0x04 - SW in TDA9855, C4/Control 1 in TDA9850 */ +/* Unique to TDA9855: */ +/* 4 bits << 2 control subwoofer/surround gain from -14db (0x1) to 14db (0xf) + * in 3dB steps - mute is 0x0 */ + +/* Unique to TDA9850: */ +/* lower 4 bits control stereo noise threshold, over which stereo turns off + * set to values of 0x00 through 0x0f for Ster1 through Ster16 */ + + +/* 0x05 - C5 - Control 1 in TDA9855 , Control 2 in TDA9850*/ +/* Unique to TDA9855: */ +#define TDA9855_MUTE 1<<7 /* GMU, Mute at outputs */ +#define TDA9855_AVL 1<<6 /* AVL, Automatic Volume Level */ +#define TDA9855_LOUD 1<<5 /* Loudness, 1==off */ +#define TDA9855_SUR 1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */ + /* Bits 0 to 3 select various combinations + * of line in and line out, only the + * interesting ones are defined */ +#define TDA9855_EXT 1<<2 /* Selects inputs LIR and LIL. Pins 41 & 12 */ +#define TDA9855_INT 0 /* Selects inputs LOR and LOL. (internal) */ + +/* Unique to TDA9850: */ +/* lower 4 bits contol SAP noise threshold, over which SAP turns off + * set to values of 0x00 through 0x0f for SAP1 through SAP16 */ + + +/* 0x06 - C6 - Control 2 in TDA9855, Control 3 in TDA9850 */ +/* Common to TDA9855 and TDA9850: */ +#define TDA985x_SAP 3<<6 /* Selects SAP output, mute if not received */ +#define TDA985x_MONOSAP 2<<6 /* Selects Mono on left, SAP on right */ +#define TDA985x_STEREO 1<<6 /* Selects Stereo ouput, mono if not received */ +#define TDA985x_MONO 0 /* Forces Mono output */ +#define TDA985x_LMU 1<<3 /* Mute (LOR/LOL for 9855, OUTL/OUTR for 9850) */ + +/* Unique to TDA9855: */ +#define TDA9855_TZCM 1<<5 /* If set, don't mute till zero crossing */ +#define TDA9855_VZCM 1<<4 /* If set, don't change volume till zero crossing*/ +#define TDA9855_LINEAR 0 /* Linear Stereo */ +#define TDA9855_PSEUDO 1 /* Pseudo Stereo */ +#define TDA9855_SPAT_30 2 /* Spatial Stereo, 30% anti-phase crosstalk */ +#define TDA9855_SPAT_50 3 /* Spatial Stereo, 52% anti-phase crosstalk */ +#define TDA9855_E_MONO 7 /* Forced mono - mono select elseware, so useless*/ + +/* 0x07 - C7 - Control 3 in TDA9855, Control 4 in TDA9850 */ +/* Common to both TDA9855 and TDA9850: */ +/* lower 4 bits control input gain from -3.5dB (0x0) to 4dB (0xF) + * in .5dB steps - 0dB is 0x7 */ + +/* 0x08, 0x09 - A1 and A2 (read/write) */ +/* Common to both TDA9855 and TDA9850: */ +/* lower 5 bites are wideband and spectral expander alignment + * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */ +#define TDA985x_STP 1<<5 /* Stereo Pilot/detect (read-only) */ +#define TDA985x_SAPP 1<<6 /* SAP Pilot/detect (read-only) */ +#define TDA985x_STS 1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/ + +/* 0x0a - A3 */ +/* Common to both TDA9855 and TDA9850: */ +/* lower 3 bits control timing current for alignment: -30% (0x0), -20% (0x1), + * -10% (0x2), nominal (0x3), +10% (0x6), +20% (0x5), +30% (0x4) */ +#define TDA985x_ADJ 1<<7 /* Stereo adjust on/off (wideband and spectral */ + +static int tda9855_volume(int val) { return val/0x2e8+0x27; } +static int tda9855_bass(int val) { return val/0xccc+0x06; } +static int tda9855_treble(int val) { return (val/0x1c71+0x3)<<1; } + +static int tda985x_getrxsubchans(struct CHIPSTATE *chip) +{ + int mode, val; + + /* Add mono mode regardless of SAP and stereo */ + /* Allows forced mono */ + mode = V4L2_TUNER_SUB_MONO; + val = chip_read(chip); + if (val & TDA985x_STP) + mode = V4L2_TUNER_SUB_STEREO; + if (val & TDA985x_SAPP) + mode |= V4L2_TUNER_SUB_SAP; + return mode; +} + +static void tda985x_setaudmode(struct CHIPSTATE *chip, int mode) +{ + int update = 1; + int c6 = chip->shadow.bytes[TDA985x_C6+1] & 0x3f; + + switch (mode) { + case V4L2_TUNER_MODE_MONO: + c6 |= TDA985x_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + c6 |= TDA985x_STEREO; + break; + case V4L2_TUNER_MODE_SAP: + c6 |= TDA985x_SAP; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + c6 |= TDA985x_MONOSAP; + break; + default: + update = 0; + } + if (update) + chip_write(chip,TDA985x_C6,c6); +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda9873h */ + +/* Subaddresses for TDA9873H */ + +#define TDA9873_SW 0x00 /* Switching */ +#define TDA9873_AD 0x01 /* Adjust */ +#define TDA9873_PT 0x02 /* Port */ + +/* Subaddress 0x00: Switching Data + * B7..B0: + * + * B1, B0: Input source selection + * 0, 0 internal + * 1, 0 external stereo + * 0, 1 external mono + */ +#define TDA9873_INP_MASK 3 +#define TDA9873_INTERNAL 0 +#define TDA9873_EXT_STEREO 2 +#define TDA9873_EXT_MONO 1 + +/* B3, B2: output signal select + * B4 : transmission mode + * 0, 0, 1 Mono + * 1, 0, 0 Stereo + * 1, 1, 1 Stereo (reversed channel) + * 0, 0, 0 Dual AB + * 0, 0, 1 Dual AA + * 0, 1, 0 Dual BB + * 0, 1, 1 Dual BA + */ + +#define TDA9873_TR_MASK (7 << 2) +#define TDA9873_TR_MONO 4 +#define TDA9873_TR_STEREO 1 << 4 +#define TDA9873_TR_REVERSE ((1 << 3) | (1 << 2)) +#define TDA9873_TR_DUALA 1 << 2 +#define TDA9873_TR_DUALB 1 << 3 +#define TDA9873_TR_DUALAB 0 + +/* output level controls + * B5: output level switch (0 = reduced gain, 1 = normal gain) + * B6: mute (1 = muted) + * B7: auto-mute (1 = auto-mute enabled) + */ + +#define TDA9873_GAIN_NORMAL 1 << 5 +#define TDA9873_MUTE 1 << 6 +#define TDA9873_AUTOMUTE 1 << 7 + +/* Subaddress 0x01: Adjust/standard */ + +/* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB) + * Recommended value is +0 dB + */ + +#define TDA9873_STEREO_ADJ 0x06 /* 0dB gain */ + +/* Bits C6..C4 control FM stantard + * C6, C5, C4 + * 0, 0, 0 B/G (PAL FM) + * 0, 0, 1 M + * 0, 1, 0 D/K(1) + * 0, 1, 1 D/K(2) + * 1, 0, 0 D/K(3) + * 1, 0, 1 I + */ +#define TDA9873_BG 0 +#define TDA9873_M 1 +#define TDA9873_DK1 2 +#define TDA9873_DK2 3 +#define TDA9873_DK3 4 +#define TDA9873_I 5 + +/* C7 controls identification response time (1=fast/0=normal) + */ +#define TDA9873_IDR_NORM 0 +#define TDA9873_IDR_FAST 1 << 7 + + +/* Subaddress 0x02: Port data */ + +/* E1, E0 free programmable ports P1/P2 + 0, 0 both ports low + 0, 1 P1 high + 1, 0 P2 high + 1, 1 both ports high +*/ + +#define TDA9873_PORTS 3 + +/* E2: test port */ +#define TDA9873_TST_PORT 1 << 2 + +/* E5..E3 control mono output channel (together with transmission mode bit B4) + * + * E5 E4 E3 B4 OUTM + * 0 0 0 0 mono + * 0 0 1 0 DUAL B + * 0 1 0 1 mono (from stereo decoder) + */ +#define TDA9873_MOUT_MONO 0 +#define TDA9873_MOUT_FMONO 0 +#define TDA9873_MOUT_DUALA 0 +#define TDA9873_MOUT_DUALB 1 << 3 +#define TDA9873_MOUT_ST 1 << 4 +#define TDA9873_MOUT_EXTM ((1 << 4) | (1 << 3)) +#define TDA9873_MOUT_EXTL 1 << 5 +#define TDA9873_MOUT_EXTR ((1 << 5) | (1 << 3)) +#define TDA9873_MOUT_EXTLR ((1 << 5) | (1 << 4)) +#define TDA9873_MOUT_MUTE ((1 << 5) | (1 << 4) | (1 << 3)) + +/* Status bits: (chip read) */ +#define TDA9873_PONR 0 /* Power-on reset detected if = 1 */ +#define TDA9873_STEREO 2 /* Stereo sound is identified */ +#define TDA9873_DUAL 4 /* Dual sound is identified */ + +static int tda9873_getrxsubchans(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int val,mode; + + val = chip_read(chip); + mode = V4L2_TUNER_SUB_MONO; + if (val & TDA9873_STEREO) + mode = V4L2_TUNER_SUB_STEREO; + if (val & TDA9873_DUAL) + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + v4l2_dbg(1, debug, sd, + "tda9873_getrxsubchans(): raw chip read: %d, return: %d\n", + val, mode); + return mode; +} + +static void tda9873_setaudmode(struct CHIPSTATE *chip, int mode) +{ + struct v4l2_subdev *sd = &chip->sd; + int sw_data = chip->shadow.bytes[TDA9873_SW+1] & ~ TDA9873_TR_MASK; + /* int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */ + + if ((sw_data & TDA9873_INP_MASK) != TDA9873_INTERNAL) { + v4l2_dbg(1, debug, sd, + "tda9873_setaudmode(): external input\n"); + return; + } + + v4l2_dbg(1, debug, sd, + "tda9873_setaudmode(): chip->shadow.bytes[%d] = %d\n", + TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]); + v4l2_dbg(1, debug, sd, "tda9873_setaudmode(): sw_data = %d\n", + sw_data); + + switch (mode) { + case V4L2_TUNER_MODE_MONO: + sw_data |= TDA9873_TR_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + sw_data |= TDA9873_TR_STEREO; + break; + case V4L2_TUNER_MODE_LANG1: + sw_data |= TDA9873_TR_DUALA; + break; + case V4L2_TUNER_MODE_LANG2: + sw_data |= TDA9873_TR_DUALB; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + sw_data |= TDA9873_TR_DUALAB; + break; + default: + return; + } + + chip_write(chip, TDA9873_SW, sw_data); + v4l2_dbg(1, debug, sd, + "tda9873_setaudmode(): req. mode %d; chip_write: %d\n", + mode, sw_data); +} + +static int tda9873_checkit(struct CHIPSTATE *chip) +{ + int rc; + + if (-1 == (rc = chip_read2(chip,254))) + return 0; + return (rc & ~0x1f) == 0x80; +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip description - defines+functions for tda9874h and tda9874a */ +/* Dariusz Kowalewski <darekk@automex.pl> */ + +/* Subaddresses for TDA9874H and TDA9874A (slave rx) */ +#define TDA9874A_AGCGR 0x00 /* AGC gain */ +#define TDA9874A_GCONR 0x01 /* general config */ +#define TDA9874A_MSR 0x02 /* monitor select */ +#define TDA9874A_C1FRA 0x03 /* carrier 1 freq. */ +#define TDA9874A_C1FRB 0x04 /* carrier 1 freq. */ +#define TDA9874A_C1FRC 0x05 /* carrier 1 freq. */ +#define TDA9874A_C2FRA 0x06 /* carrier 2 freq. */ +#define TDA9874A_C2FRB 0x07 /* carrier 2 freq. */ +#define TDA9874A_C2FRC 0x08 /* carrier 2 freq. */ +#define TDA9874A_DCR 0x09 /* demodulator config */ +#define TDA9874A_FMER 0x0a /* FM de-emphasis */ +#define TDA9874A_FMMR 0x0b /* FM dematrix */ +#define TDA9874A_C1OLAR 0x0c /* ch.1 output level adj. */ +#define TDA9874A_C2OLAR 0x0d /* ch.2 output level adj. */ +#define TDA9874A_NCONR 0x0e /* NICAM config */ +#define TDA9874A_NOLAR 0x0f /* NICAM output level adj. */ +#define TDA9874A_NLELR 0x10 /* NICAM lower error limit */ +#define TDA9874A_NUELR 0x11 /* NICAM upper error limit */ +#define TDA9874A_AMCONR 0x12 /* audio mute control */ +#define TDA9874A_SDACOSR 0x13 /* stereo DAC output select */ +#define TDA9874A_AOSR 0x14 /* analog output select */ +#define TDA9874A_DAICONR 0x15 /* digital audio interface config */ +#define TDA9874A_I2SOSR 0x16 /* I2S-bus output select */ +#define TDA9874A_I2SOLAR 0x17 /* I2S-bus output level adj. */ +#define TDA9874A_MDACOSR 0x18 /* mono DAC output select (tda9874a) */ +#define TDA9874A_ESP 0xFF /* easy standard progr. (tda9874a) */ + +/* Subaddresses for TDA9874H and TDA9874A (slave tx) */ +#define TDA9874A_DSR 0x00 /* device status */ +#define TDA9874A_NSR 0x01 /* NICAM status */ +#define TDA9874A_NECR 0x02 /* NICAM error count */ +#define TDA9874A_DR1 0x03 /* add. data LSB */ +#define TDA9874A_DR2 0x04 /* add. data MSB */ +#define TDA9874A_LLRA 0x05 /* monitor level read-out LSB */ +#define TDA9874A_LLRB 0x06 /* monitor level read-out MSB */ +#define TDA9874A_SIFLR 0x07 /* SIF level */ +#define TDA9874A_TR2 252 /* test reg. 2 */ +#define TDA9874A_TR1 253 /* test reg. 1 */ +#define TDA9874A_DIC 254 /* device id. code */ +#define TDA9874A_SIC 255 /* software id. code */ + + +static int tda9874a_mode = 1; /* 0: A2, 1: NICAM */ +static int tda9874a_GCONR = 0xc0; /* default config. input pin: SIFSEL=0 */ +static int tda9874a_NCONR = 0x01; /* default NICAM config.: AMSEL=0,AMUTE=1 */ +static int tda9874a_ESP = 0x07; /* default standard: NICAM D/K */ +static int tda9874a_dic = -1; /* device id. code */ + +/* insmod options for tda9874a */ +static unsigned int tda9874a_SIF = UNSET; +static unsigned int tda9874a_AMSEL = UNSET; +static unsigned int tda9874a_STD = UNSET; +module_param(tda9874a_SIF, int, 0444); +module_param(tda9874a_AMSEL, int, 0444); +module_param(tda9874a_STD, int, 0444); + +/* + * initialization table for tda9874 decoder: + * - carrier 1 freq. registers (3 bytes) + * - carrier 2 freq. registers (3 bytes) + * - demudulator config register + * - FM de-emphasis register (slow identification mode) + * Note: frequency registers must be written in single i2c transfer. + */ +static struct tda9874a_MODES { + char *name; + audiocmd cmd; +} tda9874a_modelist[9] = { + { "A2, B/G", /* default */ + { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, + { "A2, M (Korea)", + { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, + { "A2, D/K (1)", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x82,0x60,0x00, 0x00,0x00 }} }, + { "A2, D/K (2)", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x8C,0x75,0x55, 0x00,0x00 }} }, + { "A2, D/K (3)", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x77,0xA0,0x00, 0x00,0x00 }} }, + { "NICAM, I", + { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, + { "NICAM, B/G", + { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, + { "NICAM, D/K", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, + { "NICAM, L", + { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } +}; + +static int tda9874a_setup(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + + chip_write(chip, TDA9874A_AGCGR, 0x00); /* 0 dB */ + chip_write(chip, TDA9874A_GCONR, tda9874a_GCONR); + chip_write(chip, TDA9874A_MSR, (tda9874a_mode) ? 0x03:0x02); + if(tda9874a_dic == 0x11) { + chip_write(chip, TDA9874A_FMMR, 0x80); + } else { /* dic == 0x07 */ + chip_cmd(chip,"tda9874_modelist",&tda9874a_modelist[tda9874a_STD].cmd); + chip_write(chip, TDA9874A_FMMR, 0x00); + } + chip_write(chip, TDA9874A_C1OLAR, 0x00); /* 0 dB */ + chip_write(chip, TDA9874A_C2OLAR, 0x00); /* 0 dB */ + chip_write(chip, TDA9874A_NCONR, tda9874a_NCONR); + chip_write(chip, TDA9874A_NOLAR, 0x00); /* 0 dB */ + /* Note: If signal quality is poor you may want to change NICAM */ + /* error limit registers (NLELR and NUELR) to some greater values. */ + /* Then the sound would remain stereo, but won't be so clear. */ + chip_write(chip, TDA9874A_NLELR, 0x14); /* default */ + chip_write(chip, TDA9874A_NUELR, 0x50); /* default */ + + if(tda9874a_dic == 0x11) { + chip_write(chip, TDA9874A_AMCONR, 0xf9); + chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80); + chip_write(chip, TDA9874A_AOSR, 0x80); + chip_write(chip, TDA9874A_MDACOSR, (tda9874a_mode) ? 0x82:0x80); + chip_write(chip, TDA9874A_ESP, tda9874a_ESP); + } else { /* dic == 0x07 */ + chip_write(chip, TDA9874A_AMCONR, 0xfb); + chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80); + chip_write(chip, TDA9874A_AOSR, 0x00); /* or 0x10 */ + } + v4l2_dbg(1, debug, sd, "tda9874a_setup(): %s [0x%02X].\n", + tda9874a_modelist[tda9874a_STD].name,tda9874a_STD); + return 1; +} + +static int tda9874a_getrxsubchans(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int dsr,nsr,mode; + int necr; /* just for debugging */ + + mode = V4L2_TUNER_SUB_MONO; + + if(-1 == (dsr = chip_read2(chip,TDA9874A_DSR))) + return mode; + if(-1 == (nsr = chip_read2(chip,TDA9874A_NSR))) + return mode; + if(-1 == (necr = chip_read2(chip,TDA9874A_NECR))) + return mode; + + /* need to store dsr/nsr somewhere */ + chip->shadow.bytes[MAXREGS-2] = dsr; + chip->shadow.bytes[MAXREGS-1] = nsr; + + if(tda9874a_mode) { + /* Note: DSR.RSSF and DSR.AMSTAT bits are also checked. + * If NICAM auto-muting is enabled, DSR.AMSTAT=1 indicates + * that sound has (temporarily) switched from NICAM to + * mono FM (or AM) on 1st sound carrier due to high NICAM bit + * error count. So in fact there is no stereo in this case :-( + * But changing the mode to V4L2_TUNER_MODE_MONO would switch + * external 4052 multiplexer in audio_hook(). + */ + if(nsr & 0x02) /* NSR.S/MB=1 */ + mode = V4L2_TUNER_SUB_STEREO; + if(nsr & 0x01) /* NSR.D/SB=1 */ + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } else { + if(dsr & 0x02) /* DSR.IDSTE=1 */ + mode = V4L2_TUNER_SUB_STEREO; + if(dsr & 0x04) /* DSR.IDDUA=1 */ + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + } + + v4l2_dbg(1, debug, sd, + "tda9874a_getrxsubchans(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n", + dsr, nsr, necr, mode); + return mode; +} + +static void tda9874a_setaudmode(struct CHIPSTATE *chip, int mode) +{ + struct v4l2_subdev *sd = &chip->sd; + + /* Disable/enable NICAM auto-muting (based on DSR.RSSF status bit). */ + /* If auto-muting is disabled, we can hear a signal of degrading quality. */ + if (tda9874a_mode) { + if(chip->shadow.bytes[MAXREGS-2] & 0x20) /* DSR.RSSF=1 */ + tda9874a_NCONR &= 0xfe; /* enable */ + else + tda9874a_NCONR |= 0x01; /* disable */ + chip_write(chip, TDA9874A_NCONR, tda9874a_NCONR); + } + + /* Note: TDA9874A supports automatic FM dematrixing (FMMR register) + * and has auto-select function for audio output (AOSR register). + * Old TDA9874H doesn't support these features. + * TDA9874A also has additional mono output pin (OUTM), which + * on same (all?) tv-cards is not used, anyway (as well as MONOIN). + */ + if(tda9874a_dic == 0x11) { + int aosr = 0x80; + int mdacosr = (tda9874a_mode) ? 0x82:0x80; + + switch(mode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_STEREO: + break; + case V4L2_TUNER_MODE_LANG1: + aosr = 0x80; /* auto-select, dual A/A */ + mdacosr = (tda9874a_mode) ? 0x82:0x80; + break; + case V4L2_TUNER_MODE_LANG2: + aosr = 0xa0; /* auto-select, dual B/B */ + mdacosr = (tda9874a_mode) ? 0x83:0x81; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + aosr = 0x00; /* always route L to L and R to R */ + mdacosr = (tda9874a_mode) ? 0x82:0x80; + break; + default: + return; + } + chip_write(chip, TDA9874A_AOSR, aosr); + chip_write(chip, TDA9874A_MDACOSR, mdacosr); + + v4l2_dbg(1, debug, sd, + "tda9874a_setaudmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n", + mode, aosr, mdacosr); + + } else { /* dic == 0x07 */ + int fmmr,aosr; + + switch(mode) { + case V4L2_TUNER_MODE_MONO: + fmmr = 0x00; /* mono */ + aosr = 0x10; /* A/A */ + break; + case V4L2_TUNER_MODE_STEREO: + if(tda9874a_mode) { + fmmr = 0x00; + aosr = 0x00; /* handled by NICAM auto-mute */ + } else { + fmmr = (tda9874a_ESP == 1) ? 0x05 : 0x04; /* stereo */ + aosr = 0x00; + } + break; + case V4L2_TUNER_MODE_LANG1: + fmmr = 0x02; /* dual */ + aosr = 0x10; /* dual A/A */ + break; + case V4L2_TUNER_MODE_LANG2: + fmmr = 0x02; /* dual */ + aosr = 0x20; /* dual B/B */ + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + fmmr = 0x02; /* dual */ + aosr = 0x00; /* dual A/B */ + break; + default: + return; + } + chip_write(chip, TDA9874A_FMMR, fmmr); + chip_write(chip, TDA9874A_AOSR, aosr); + + v4l2_dbg(1, debug, sd, + "tda9874a_setaudmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n", + mode, fmmr, aosr); + } +} + +static int tda9874a_checkit(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int dic,sic; /* device id. and software id. codes */ + + if(-1 == (dic = chip_read2(chip,TDA9874A_DIC))) + return 0; + if(-1 == (sic = chip_read2(chip,TDA9874A_SIC))) + return 0; + + v4l2_dbg(1, debug, sd, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic, sic); + + if((dic == 0x11)||(dic == 0x07)) { + v4l2_info(sd, "found tda9874%s.\n", (dic == 0x11) ? "a" : "h"); + tda9874a_dic = dic; /* remember device id. */ + return 1; + } + return 0; /* not found */ +} + +static int tda9874a_initialize(struct CHIPSTATE *chip) +{ + if (tda9874a_SIF > 2) + tda9874a_SIF = 1; + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) + tda9874a_STD = 0; + if(tda9874a_AMSEL > 1) + tda9874a_AMSEL = 0; + + if(tda9874a_SIF == 1) + tda9874a_GCONR = 0xc0; /* sound IF input 1 */ + else + tda9874a_GCONR = 0xc1; /* sound IF input 2 */ + + tda9874a_ESP = tda9874a_STD; + tda9874a_mode = (tda9874a_STD < 5) ? 0 : 1; + + if(tda9874a_AMSEL == 0) + tda9874a_NCONR = 0x01; /* auto-mute: analog mono input */ + else + tda9874a_NCONR = 0x05; /* auto-mute: 1st carrier FM or AM */ + + tda9874a_setup(chip); + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip description - defines+functions for tda9875 */ +/* The TDA9875 is made by Philips Semiconductor + * http://www.semiconductors.philips.com + * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator + * + */ + +/* subaddresses for TDA9875 */ +#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/ +#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */ +#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/ +#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/ + +#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/ +#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/ +#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/ +#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/ + +#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/ +#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/ +#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/ +#define TDA9875_MVL 0x1a /* Main volume gauche */ +#define TDA9875_MVR 0x1b /* Main volume droite */ +#define TDA9875_MBA 0x1d /* Main Basse */ +#define TDA9875_MTR 0x1e /* Main treble */ +#define TDA9875_ACS 0x1f /* Auxiliary channel select (FM) 0b0000000*/ +#define TDA9875_AVL 0x20 /* Auxiliary volume gauche */ +#define TDA9875_AVR 0x21 /* Auxiliary volume droite */ +#define TDA9875_ABA 0x22 /* Auxiliary Basse */ +#define TDA9875_ATR 0x23 /* Auxiliary treble */ + +#define TDA9875_MSR 0x02 /* Monitor select register */ +#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ +#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */ +#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */ +#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */ +#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */ +#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */ +#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/ +#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/ +#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/ + +/* values */ +#define TDA9875_MUTE_ON 0xff /* general mute */ +#define TDA9875_MUTE_OFF 0xcc /* general no mute */ + +static int tda9875_initialize(struct CHIPSTATE *chip) +{ + chip_write(chip, TDA9875_CFG, 0xd0); /*reg de config 0 (reset)*/ + chip_write(chip, TDA9875_MSR, 0x03); /* Monitor 0b00000XXX*/ + chip_write(chip, TDA9875_C1MSB, 0x00); /*Car1(FM) MSB XMHz*/ + chip_write(chip, TDA9875_C1MIB, 0x00); /*Car1(FM) MIB XMHz*/ + chip_write(chip, TDA9875_C1LSB, 0x00); /*Car1(FM) LSB XMHz*/ + chip_write(chip, TDA9875_C2MSB, 0x00); /*Car2(NICAM) MSB XMHz*/ + chip_write(chip, TDA9875_C2MIB, 0x00); /*Car2(NICAM) MIB XMHz*/ + chip_write(chip, TDA9875_C2LSB, 0x00); /*Car2(NICAM) LSB XMHz*/ + chip_write(chip, TDA9875_DCR, 0x00); /*Demod config 0x00*/ + chip_write(chip, TDA9875_DEEM, 0x44); /*DE-Emph 0b0100 0100*/ + chip_write(chip, TDA9875_FMAT, 0x00); /*FM Matrix reg 0x00*/ + chip_write(chip, TDA9875_SC1, 0x00); /* SCART 1 (SC1)*/ + chip_write(chip, TDA9875_SC2, 0x01); /* SCART 2 (sc2)*/ + + chip_write(chip, TDA9875_CH1V, 0x10); /* Channel volume 1 mute*/ + chip_write(chip, TDA9875_CH2V, 0x10); /* Channel volume 2 mute */ + chip_write(chip, TDA9875_DACOS, 0x02); /* sig DAC i/o(in:nicam)*/ + chip_write(chip, TDA9875_ADCIS, 0x6f); /* sig ADC input(in:mono)*/ + chip_write(chip, TDA9875_LOSR, 0x00); /* line out (in:mono)*/ + chip_write(chip, TDA9875_AER, 0x00); /*06 Effect (AVL+PSEUDO) */ + chip_write(chip, TDA9875_MCS, 0x44); /* Main ch select (DAC) */ + chip_write(chip, TDA9875_MVL, 0x03); /* Vol Main left 10dB */ + chip_write(chip, TDA9875_MVR, 0x03); /* Vol Main right 10dB*/ + chip_write(chip, TDA9875_MBA, 0x00); /* Main Bass Main 0dB*/ + chip_write(chip, TDA9875_MTR, 0x00); /* Main Treble Main 0dB*/ + chip_write(chip, TDA9875_ACS, 0x44); /* Aux chan select (dac)*/ + chip_write(chip, TDA9875_AVL, 0x00); /* Vol Aux left 0dB*/ + chip_write(chip, TDA9875_AVR, 0x00); /* Vol Aux right 0dB*/ + chip_write(chip, TDA9875_ABA, 0x00); /* Aux Bass Main 0dB*/ + chip_write(chip, TDA9875_ATR, 0x00); /* Aux Aigus Main 0dB*/ + + chip_write(chip, TDA9875_MUT, 0xcc); /* General mute */ + return 0; +} + +static int tda9875_volume(int val) { return (unsigned char)(val / 602 - 84); } +static int tda9875_bass(int val) { return (unsigned char)(max(-12, val / 2115 - 15)); } +static int tda9875_treble(int val) { return (unsigned char)(val / 2622 - 12); } + +/* ----------------------------------------------------------------------- */ + + +/* *********************** * + * i2c interface functions * + * *********************** */ + +static int tda9875_checkit(struct CHIPSTATE *chip) +{ + struct v4l2_subdev *sd = &chip->sd; + int dic, rev; + + dic = chip_read2(chip, 254); + rev = chip_read2(chip, 255); + + if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */ + v4l2_info(sd, "found tda9875%s rev. %d.\n", + dic == 0 ? "" : "A", rev); + return 1; + } + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tea6420 */ + +#define TEA6300_VL 0x00 /* volume left */ +#define TEA6300_VR 0x01 /* volume right */ +#define TEA6300_BA 0x02 /* bass */ +#define TEA6300_TR 0x03 /* treble */ +#define TEA6300_FA 0x04 /* fader control */ +#define TEA6300_S 0x05 /* switch register */ + /* values for those registers: */ +#define TEA6300_S_SA 0x01 /* stereo A input */ +#define TEA6300_S_SB 0x02 /* stereo B */ +#define TEA6300_S_SC 0x04 /* stereo C */ +#define TEA6300_S_GMU 0x80 /* general mute */ + +#define TEA6320_V 0x00 /* volume (0-5)/loudness off (6)/zero crossing mute(7) */ +#define TEA6320_FFR 0x01 /* fader front right (0-5) */ +#define TEA6320_FFL 0x02 /* fader front left (0-5) */ +#define TEA6320_FRR 0x03 /* fader rear right (0-5) */ +#define TEA6320_FRL 0x04 /* fader rear left (0-5) */ +#define TEA6320_BA 0x05 /* bass (0-4) */ +#define TEA6320_TR 0x06 /* treble (0-4) */ +#define TEA6320_S 0x07 /* switch register */ + /* values for those registers: */ +#define TEA6320_S_SA 0x07 /* stereo A input */ +#define TEA6320_S_SB 0x06 /* stereo B */ +#define TEA6320_S_SC 0x05 /* stereo C */ +#define TEA6320_S_SD 0x04 /* stereo D */ +#define TEA6320_S_GMU 0x80 /* general mute */ + +#define TEA6420_S_SA 0x00 /* stereo A input */ +#define TEA6420_S_SB 0x01 /* stereo B */ +#define TEA6420_S_SC 0x02 /* stereo C */ +#define TEA6420_S_SD 0x03 /* stereo D */ +#define TEA6420_S_SE 0x04 /* stereo E */ +#define TEA6420_S_GMU 0x05 /* general mute */ + +static int tea6300_shift10(int val) { return val >> 10; } +static int tea6300_shift12(int val) { return val >> 12; } + +/* Assumes 16bit input (values 0x3f to 0x0c are unique, values less than */ +/* 0x0c mirror those immediately higher) */ +static int tea6320_volume(int val) { return (val / (65535/(63-12)) + 12) & 0x3f; } +static int tea6320_shift11(int val) { return val >> 11; } +static int tea6320_initialize(struct CHIPSTATE * chip) +{ + chip_write(chip, TEA6320_FFR, 0x3f); + chip_write(chip, TEA6320_FFL, 0x3f); + chip_write(chip, TEA6320_FRR, 0x3f); + chip_write(chip, TEA6320_FRL, 0x3f); + + return 0; +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for tda8425 */ + +#define TDA8425_VL 0x00 /* volume left */ +#define TDA8425_VR 0x01 /* volume right */ +#define TDA8425_BA 0x02 /* bass */ +#define TDA8425_TR 0x03 /* treble */ +#define TDA8425_S1 0x08 /* switch functions */ + /* values for those registers: */ +#define TDA8425_S1_OFF 0xEE /* audio off (mute on) */ +#define TDA8425_S1_CH1 0xCE /* audio channel 1 (mute off) - "linear stereo" mode */ +#define TDA8425_S1_CH2 0xCF /* audio channel 2 (mute off) - "linear stereo" mode */ +#define TDA8425_S1_MU 0x20 /* mute bit */ +#define TDA8425_S1_STEREO 0x18 /* stereo bits */ +#define TDA8425_S1_STEREO_SPATIAL 0x18 /* spatial stereo */ +#define TDA8425_S1_STEREO_LINEAR 0x08 /* linear stereo */ +#define TDA8425_S1_STEREO_PSEUDO 0x10 /* pseudo stereo */ +#define TDA8425_S1_STEREO_MONO 0x00 /* forced mono */ +#define TDA8425_S1_ML 0x06 /* language selector */ +#define TDA8425_S1_ML_SOUND_A 0x02 /* sound a */ +#define TDA8425_S1_ML_SOUND_B 0x04 /* sound b */ +#define TDA8425_S1_ML_STEREO 0x06 /* stereo */ +#define TDA8425_S1_IS 0x01 /* channel selector */ + + +static int tda8425_shift10(int val) { return (val >> 10) | 0xc0; } +static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } + +static void tda8425_setaudmode(struct CHIPSTATE *chip, int mode) +{ + int s1 = chip->shadow.bytes[TDA8425_S1+1] & 0xe1; + + switch (mode) { + case V4L2_TUNER_MODE_LANG1: + s1 |= TDA8425_S1_ML_SOUND_A; + s1 |= TDA8425_S1_STEREO_PSEUDO; + break; + case V4L2_TUNER_MODE_LANG2: + s1 |= TDA8425_S1_ML_SOUND_B; + s1 |= TDA8425_S1_STEREO_PSEUDO; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + s1 |= TDA8425_S1_ML_STEREO; + s1 |= TDA8425_S1_STEREO_LINEAR; + break; + case V4L2_TUNER_MODE_MONO: + s1 |= TDA8425_S1_ML_STEREO; + s1 |= TDA8425_S1_STEREO_MONO; + break; + case V4L2_TUNER_MODE_STEREO: + s1 |= TDA8425_S1_ML_STEREO; + s1 |= TDA8425_S1_STEREO_SPATIAL; + break; + default: + return; + } + chip_write(chip,TDA8425_S1,s1); +} + + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for pic16c54 (PV951) */ + +/* the registers of 16C54, I2C sub address. */ +#define PIC16C54_REG_KEY_CODE 0x01 /* Not use. */ +#define PIC16C54_REG_MISC 0x02 + +/* bit definition of the RESET register, I2C data. */ +#define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */ + /* code of remote controller */ +#define PIC16C54_MISC_MTS_MAIN 0x02 /* bit 1 */ +#define PIC16C54_MISC_MTS_SAP 0x04 /* bit 2 */ +#define PIC16C54_MISC_MTS_BOTH 0x08 /* bit 3 */ +#define PIC16C54_MISC_SND_MUTE 0x10 /* bit 4, Mute Audio(Line-in and Tuner) */ +#define PIC16C54_MISC_SND_NOTMUTE 0x20 /* bit 5 */ +#define PIC16C54_MISC_SWITCH_TUNER 0x40 /* bit 6 , Switch to Line-in */ +#define PIC16C54_MISC_SWITCH_LINE 0x80 /* bit 7 , Switch to Tuner */ + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - defines+functions for TA8874Z */ + +/* write 1st byte */ +#define TA8874Z_LED_STE 0x80 +#define TA8874Z_LED_BIL 0x40 +#define TA8874Z_LED_EXT 0x20 +#define TA8874Z_MONO_SET 0x10 +#define TA8874Z_MUTE 0x08 +#define TA8874Z_F_MONO 0x04 +#define TA8874Z_MODE_SUB 0x02 +#define TA8874Z_MODE_MAIN 0x01 + +/* write 2nd byte */ +/*#define TA8874Z_TI 0x80 */ /* test mode */ +#define TA8874Z_SEPARATION 0x3f +#define TA8874Z_SEPARATION_DEFAULT 0x10 + +/* read */ +#define TA8874Z_B1 0x80 +#define TA8874Z_B0 0x40 +#define TA8874Z_CHAG_FLAG 0x20 + +/* + * B1 B0 + * mono L H + * stereo L L + * BIL H L + */ +static int ta8874z_getrxsubchans(struct CHIPSTATE *chip) +{ + int val, mode; + + val = chip_read(chip); + mode = V4L2_TUNER_SUB_MONO; + if (val & TA8874Z_B1){ + mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + }else if (!(val & TA8874Z_B0)){ + mode = V4L2_TUNER_SUB_STEREO; + } + /* v4l2_dbg(1, debug, &chip->sd, + "ta8874z_getrxsubchans(): raw chip read: 0x%02x, return: 0x%02x\n", + val, mode); */ + return mode; +} + +static audiocmd ta8874z_stereo = { 2, {0, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_mono = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_main = {2, { 0, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_sub = {2, { TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}}; +static audiocmd ta8874z_both = {2, { TA8874Z_MODE_MAIN | TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}}; + +static void ta8874z_setaudmode(struct CHIPSTATE *chip, int mode) +{ + struct v4l2_subdev *sd = &chip->sd; + int update = 1; + audiocmd *t = NULL; + + v4l2_dbg(1, debug, sd, "ta8874z_setaudmode(): mode: 0x%02x\n", mode); + + switch(mode){ + case V4L2_TUNER_MODE_MONO: + t = &ta8874z_mono; + break; + case V4L2_TUNER_MODE_STEREO: + t = &ta8874z_stereo; + break; + case V4L2_TUNER_MODE_LANG1: + t = &ta8874z_main; + break; + case V4L2_TUNER_MODE_LANG2: + t = &ta8874z_sub; + break; + case V4L2_TUNER_MODE_LANG1_LANG2: + t = &ta8874z_both; + break; + default: + update = 0; + } + + if(update) + chip_cmd(chip, "TA8874Z", t); +} + +static int ta8874z_checkit(struct CHIPSTATE *chip) +{ + int rc; + rc = chip_read(chip); + return ((rc & 0x1f) == 0x1f) ? 1 : 0; +} + +/* ---------------------------------------------------------------------- */ +/* audio chip descriptions - struct CHIPDESC */ + +/* insmod options to enable/disable individual audio chips */ +static int tda8425 = 1; +static int tda9840 = 1; +static int tda9850 = 1; +static int tda9855 = 1; +static int tda9873 = 1; +static int tda9874a = 1; +static int tda9875 = 1; +static int tea6300; /* default 0 - address clash with msp34xx */ +static int tea6320; /* default 0 - address clash with msp34xx */ +static int tea6420 = 1; +static int pic16c54 = 1; +static int ta8874z; /* default 0 - address clash with tda9840 */ + +module_param(tda8425, int, 0444); +module_param(tda9840, int, 0444); +module_param(tda9850, int, 0444); +module_param(tda9855, int, 0444); +module_param(tda9873, int, 0444); +module_param(tda9874a, int, 0444); +module_param(tda9875, int, 0444); +module_param(tea6300, int, 0444); +module_param(tea6320, int, 0444); +module_param(tea6420, int, 0444); +module_param(pic16c54, int, 0444); +module_param(ta8874z, int, 0444); + +static struct CHIPDESC chiplist[] = { + { + .name = "tda9840", + .insmodopt = &tda9840, + .addr_lo = I2C_ADDR_TDA9840 >> 1, + .addr_hi = I2C_ADDR_TDA9840 >> 1, + .registers = 5, + .flags = CHIP_NEED_CHECKMODE, + + /* callbacks */ + .checkit = tda9840_checkit, + .getrxsubchans = tda9840_getrxsubchans, + .setaudmode = tda9840_setaudmode, + + .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN + /* ,TDA9840_SW, TDA9840_MONO */} } + }, + { + .name = "tda9873h", + .insmodopt = &tda9873, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, + .registers = 3, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, + + /* callbacks */ + .checkit = tda9873_checkit, + .getrxsubchans = tda9873_getrxsubchans, + .setaudmode = tda9873_setaudmode, + + .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, + .inputreg = TDA9873_SW, + .inputmute = TDA9873_MUTE | TDA9873_AUTOMUTE, + .inputmap = {0xa0, 0xa2, 0xa0, 0xa0}, + .inputmask = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE, + + }, + { + .name = "tda9874h/a", + .insmodopt = &tda9874a, + .addr_lo = I2C_ADDR_TDA9874 >> 1, + .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, + + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, + .getrxsubchans = tda9874a_getrxsubchans, + .setaudmode = tda9874a_setaudmode, + }, + { + .name = "tda9875", + .insmodopt = &tda9875, + .addr_lo = I2C_ADDR_TDA9875 >> 1, + .addr_hi = I2C_ADDR_TDA9875 >> 1, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE, + + /* callbacks */ + .initialize = tda9875_initialize, + .checkit = tda9875_checkit, + .volfunc = tda9875_volume, + .bassfunc = tda9875_bass, + .treblefunc = tda9875_treble, + .leftreg = TDA9875_MVL, + .rightreg = TDA9875_MVR, + .bassreg = TDA9875_MBA, + .treblereg = TDA9875_MTR, + .leftinit = 58880, + .rightinit = 58880, + }, + { + .name = "tda9850", + .insmodopt = &tda9850, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, + .registers = 11, + + .getrxsubchans = tda985x_getrxsubchans, + .setaudmode = tda985x_setaudmode, + + .init = { 8, { TDA9850_C4, 0x08, 0x08, TDA985x_STEREO, 0x07, 0x10, 0x10, 0x03 } } + }, + { + .name = "tda9855", + .insmodopt = &tda9855, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, + .registers = 11, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE, + + .leftreg = TDA9855_VL, + .rightreg = TDA9855_VR, + .bassreg = TDA9855_BA, + .treblereg = TDA9855_TR, + + /* callbacks */ + .volfunc = tda9855_volume, + .bassfunc = tda9855_bass, + .treblefunc = tda9855_treble, + .getrxsubchans = tda985x_getrxsubchans, + .setaudmode = tda985x_setaudmode, + + .init = { 12, { 0, 0x6f, 0x6f, 0x0e, 0x07<<1, 0x8<<2, + TDA9855_MUTE | TDA9855_AVL | TDA9855_LOUD | TDA9855_INT, + TDA985x_STEREO | TDA9855_LINEAR | TDA9855_TZCM | TDA9855_VZCM, + 0x07, 0x10, 0x10, 0x03 }} + }, + { + .name = "tea6300", + .insmodopt = &tea6300, + .addr_lo = I2C_ADDR_TEA6300 >> 1, + .addr_hi = I2C_ADDR_TEA6300 >> 1, + .registers = 6, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, + + .leftreg = TEA6300_VR, + .rightreg = TEA6300_VL, + .bassreg = TEA6300_BA, + .treblereg = TEA6300_TR, + + /* callbacks */ + .volfunc = tea6300_shift10, + .bassfunc = tea6300_shift12, + .treblefunc = tea6300_shift12, + + .inputreg = TEA6300_S, + .inputmap = { TEA6300_S_SA, TEA6300_S_SB, TEA6300_S_SC }, + .inputmute = TEA6300_S_GMU, + }, + { + .name = "tea6320", + .insmodopt = &tea6320, + .addr_lo = I2C_ADDR_TEA6300 >> 1, + .addr_hi = I2C_ADDR_TEA6300 >> 1, + .registers = 8, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, + + .leftreg = TEA6320_V, + .rightreg = TEA6320_V, + .bassreg = TEA6320_BA, + .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, + .volfunc = tea6320_volume, + .bassfunc = tea6320_shift11, + .treblefunc = tea6320_shift11, + + .inputreg = TEA6320_S, + .inputmap = { TEA6320_S_SA, TEA6420_S_SB, TEA6300_S_SC, TEA6320_S_SD }, + .inputmute = TEA6300_S_GMU, + }, + { + .name = "tea6420", + .insmodopt = &tea6420, + .addr_lo = I2C_ADDR_TEA6420 >> 1, + .addr_hi = I2C_ADDR_TEA6420 >> 1, + .registers = 1, + .flags = CHIP_HAS_INPUTSEL, + + .inputreg = -1, + .inputmap = { TEA6420_S_SA, TEA6420_S_SB, TEA6420_S_SC }, + .inputmute = TEA6300_S_GMU, + }, + { + .name = "tda8425", + .insmodopt = &tda8425, + .addr_lo = I2C_ADDR_TDA8425 >> 1, + .addr_hi = I2C_ADDR_TDA8425 >> 1, + .registers = 9, + .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, + + .leftreg = TDA8425_VL, + .rightreg = TDA8425_VR, + .bassreg = TDA8425_BA, + .treblereg = TDA8425_TR, + + /* callbacks */ + .volfunc = tda8425_shift10, + .bassfunc = tda8425_shift12, + .treblefunc = tda8425_shift12, + .setaudmode = tda8425_setaudmode, + + .inputreg = TDA8425_S1, + .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, + .inputmute = TDA8425_S1_OFF, + + }, + { + .name = "pic16c54 (PV951)", + .insmodopt = &pic16c54, + .addr_lo = I2C_ADDR_PIC16C54 >> 1, + .addr_hi = I2C_ADDR_PIC16C54>> 1, + .registers = 2, + .flags = CHIP_HAS_INPUTSEL, + + .inputreg = PIC16C54_REG_MISC, + .inputmap = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER, + PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, + PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, + PIC16C54_MISC_SND_MUTE}, + .inputmute = PIC16C54_MISC_SND_MUTE, + }, + { + .name = "ta8874z", + .checkit = ta8874z_checkit, + .insmodopt = &ta8874z, + .addr_lo = I2C_ADDR_TDA9840 >> 1, + .addr_hi = I2C_ADDR_TDA9840 >> 1, + .registers = 2, + + /* callbacks */ + .getrxsubchans = ta8874z_getrxsubchans, + .setaudmode = ta8874z_setaudmode, + + .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, + }, + { .name = NULL } /* EOF */ +}; + + +/* ---------------------------------------------------------------------- */ + +static int tvaudio_g_ctrl(struct v4l2_subdev *sd, + struct v4l2_control *ctrl) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (!(desc->flags & CHIP_HAS_INPUTSEL)) + break; + ctrl->value=chip->muted; + return 0; + case V4L2_CID_AUDIO_VOLUME: + if (!(desc->flags & CHIP_HAS_VOLUME)) + break; + ctrl->value = max(chip->left,chip->right); + return 0; + case V4L2_CID_AUDIO_BALANCE: + { + int volume; + if (!(desc->flags & CHIP_HAS_VOLUME)) + break; + volume = max(chip->left,chip->right); + if (volume) + ctrl->value=(32768*min(chip->left,chip->right))/volume; + else + ctrl->value=32768; + return 0; + } + case V4L2_CID_AUDIO_BASS: + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; + ctrl->value = chip->bass; + return 0; + case V4L2_CID_AUDIO_TREBLE: + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; + ctrl->value = chip->treble; + return 0; + } + return -EINVAL; +} + +static int tvaudio_s_ctrl(struct v4l2_subdev *sd, + struct v4l2_control *ctrl) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (!(desc->flags & CHIP_HAS_INPUTSEL)) + break; + + if (ctrl->value < 0 || ctrl->value >= 2) + return -ERANGE; + chip->muted = ctrl->value; + if (chip->muted) + chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask); + else + chip_write_masked(chip,desc->inputreg, + desc->inputmap[chip->input],desc->inputmask); + return 0; + case V4L2_CID_AUDIO_VOLUME: + { + int volume,balance; + + if (!(desc->flags & CHIP_HAS_VOLUME)) + break; + + volume = max(chip->left,chip->right); + if (volume) + balance=(32768*min(chip->left,chip->right))/volume; + else + balance=32768; + + volume=ctrl->value; + chip->left = (min(65536 - balance,32768) * volume) / 32768; + chip->right = (min(balance,volume *(__u16)32768)) / 32768; + + chip_write(chip,desc->leftreg,desc->volfunc(chip->left)); + chip_write(chip,desc->rightreg,desc->volfunc(chip->right)); + + return 0; + } + case V4L2_CID_AUDIO_BALANCE: + { + int volume, balance; + + if (!(desc->flags & CHIP_HAS_VOLUME)) + break; + + volume = max(chip->left, chip->right); + balance = ctrl->value; + chip->left = (min(65536 - balance, 32768) * volume) / 32768; + chip->right = (min(balance, volume * (__u16)32768)) / 32768; + + chip_write(chip, desc->leftreg, desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, desc->volfunc(chip->right)); + + return 0; + } + case V4L2_CID_AUDIO_BASS: + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; + chip->bass = ctrl->value; + chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); + + return 0; + case V4L2_CID_AUDIO_TREBLE: + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; + chip->treble = ctrl->value; + chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); + + return 0; + } + return -EINVAL; +} + + +/* ---------------------------------------------------------------------- */ +/* video4linux interface */ + +static int tvaudio_s_radio(struct v4l2_subdev *sd) +{ + struct CHIPSTATE *chip = to_state(sd); + + chip->radio = 1; + /* del_timer(&chip->wt); */ + return 0; +} + +static int tvaudio_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + switch (qc->id) { + case V4L2_CID_AUDIO_MUTE: + if (desc->flags & CHIP_HAS_INPUTSEL) + return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); + break; + case V4L2_CID_AUDIO_VOLUME: + if (desc->flags & CHIP_HAS_VOLUME) + return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880); + break; + case V4L2_CID_AUDIO_BALANCE: + if (desc->flags & CHIP_HAS_VOLUME) + return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); + break; + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + if (desc->flags & CHIP_HAS_BASSTREBLE) + return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); + break; + default: + break; + } + return -EINVAL; +} + +static int tvaudio_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + if (!(desc->flags & CHIP_HAS_INPUTSEL)) + return 0; + if (input >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = input; + if (chip->muted) + return 0; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + return 0; +} + +static int tvaudio_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + if (!desc->setaudmode) + return 0; + if (chip->radio) + return 0; + + switch (vt->audmode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1: + case V4L2_TUNER_MODE_LANG2: + case V4L2_TUNER_MODE_LANG1_LANG2: + break; + default: + return -EINVAL; + } + chip->audmode = vt->audmode; + + if (chip->thread) + wake_up_process(chip->thread); + else + desc->setaudmode(chip, vt->audmode); + + return 0; +} + +static int tvaudio_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + if (!desc->getrxsubchans) + return 0; + if (chip->radio) + return 0; + + vt->audmode = chip->audmode; + vt->rxsubchans = desc->getrxsubchans(chip); + vt->capability = V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + + return 0; +} + +static int tvaudio_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct CHIPSTATE *chip = to_state(sd); + + chip->radio = 0; + return 0; +} + +static int tvaudio_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) +{ + struct CHIPSTATE *chip = to_state(sd); + struct CHIPDESC *desc = chip->desc; + + /* For chips that provide getrxsubchans and setaudmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. + */ + if (chip->thread) { + desc->setaudmode(chip, V4L2_TUNER_MODE_MONO); + chip->prevmode = -1; /* reset previous mode */ + mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); + } + return 0; +} + +static int tvaudio_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVAUDIO, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops tvaudio_core_ops = { + .g_chip_ident = tvaudio_g_chip_ident, + .queryctrl = tvaudio_queryctrl, + .g_ctrl = tvaudio_g_ctrl, + .s_ctrl = tvaudio_s_ctrl, + .s_std = tvaudio_s_std, +}; + +static const struct v4l2_subdev_tuner_ops tvaudio_tuner_ops = { + .s_radio = tvaudio_s_radio, + .s_frequency = tvaudio_s_frequency, + .s_tuner = tvaudio_s_tuner, + .g_tuner = tvaudio_g_tuner, +}; + +static const struct v4l2_subdev_audio_ops tvaudio_audio_ops = { + .s_routing = tvaudio_s_routing, +}; + +static const struct v4l2_subdev_ops tvaudio_ops = { + .core = &tvaudio_core_ops, + .tuner = &tvaudio_tuner_ops, + .audio = &tvaudio_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + + +/* i2c registration */ + +static int tvaudio_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct CHIPSTATE *chip; + struct CHIPDESC *desc; + struct v4l2_subdev *sd; + + if (debug) { + printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n"); + printk(KERN_INFO "tvaudio: known chips: "); + for (desc = chiplist; desc->name != NULL; desc++) + printk("%s%s", (desc == chiplist) ? "" : ", ", desc->name); + printk("\n"); + } + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + sd = &chip->sd; + v4l2_i2c_subdev_init(sd, client, &tvaudio_ops); + + /* find description for the chip */ + v4l2_dbg(1, debug, sd, "chip found @ 0x%x\n", client->addr<<1); + for (desc = chiplist; desc->name != NULL; desc++) { + if (0 == *(desc->insmodopt)) + continue; + if (client->addr < desc->addr_lo || + client->addr > desc->addr_hi) + continue; + if (desc->checkit && !desc->checkit(chip)) + continue; + break; + } + if (desc->name == NULL) { + v4l2_dbg(1, debug, sd, "no matching chip description found\n"); + kfree(chip); + return -EIO; + } + v4l2_info(sd, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); + if (desc->flags) { + v4l2_dbg(1, debug, sd, "matches:%s%s%s.\n", + (desc->flags & CHIP_HAS_VOLUME) ? " volume" : "", + (desc->flags & CHIP_HAS_BASSTREBLE) ? " bass/treble" : "", + (desc->flags & CHIP_HAS_INPUTSEL) ? " audiomux" : ""); + } + + /* fill required data structures */ + if (!id) + strlcpy(client->name, desc->name, I2C_NAME_SIZE); + chip->desc = desc; + chip->shadow.count = desc->registers+1; + chip->prevmode = -1; + chip->audmode = V4L2_TUNER_MODE_LANG1; + + /* initialization */ + if (desc->initialize != NULL) + desc->initialize(chip); + else + chip_cmd(chip, "init", &desc->init); + + if (desc->flags & CHIP_HAS_VOLUME) { + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l2_info(sd, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->left = desc->leftinit ? desc->leftinit : 65535; + chip->right = desc->rightinit ? desc->rightinit : 65535; + chip_write(chip, desc->leftreg, + desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, + desc->volfunc(chip->right)); + } + } + if (desc->flags & CHIP_HAS_BASSTREBLE) { + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l2_info(sd, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + chip->treble = desc->trebleinit ? + desc->trebleinit : 32768; + chip->bass = desc->bassinit ? + desc->bassinit : 32768; + chip_write(chip, desc->bassreg, + desc->bassfunc(chip->bass)); + chip_write(chip, desc->treblereg, + desc->treblefunc(chip->treble)); + } + } + + chip->thread = NULL; + init_timer(&chip->wt); + if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getrxsubchans || !desc->setaudmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l2_info(sd, "set/get mode callbacks undefined!\n"); + return 0; + } + /* start async thread */ + chip->wt.function = chip_thread_wake; + chip->wt.data = (unsigned long)chip; + chip->thread = kthread_run(chip_thread, chip, client->name); + if (IS_ERR(chip->thread)) { + v4l2_warn(sd, "failed to create kthread\n"); + chip->thread = NULL; + } + } + return 0; +} + +static int tvaudio_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct CHIPSTATE *chip = to_state(sd); + + del_timer_sync(&chip->wt); + if (chip->thread) { + /* shutdown async thread */ + kthread_stop(chip->thread); + chip->thread = NULL; + } + + v4l2_device_unregister_subdev(sd); + kfree(chip); + return 0; +} + +/* This driver supports many devices and the idea is to let the driver + detect which device is present. So rather than listing all supported + devices here, we pretend to support a single, fake device type. */ +static const struct i2c_device_id tvaudio_id[] = { + { "tvaudio", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tvaudio_id); + +static struct i2c_driver tvaudio_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tvaudio", + }, + .probe = tvaudio_probe, + .remove = tvaudio_remove, + .id_table = tvaudio_id, +}; + +module_i2c_driver(tvaudio_driver); diff --git a/drivers/media/i2c/tveeprom.c b/drivers/media/i2c/tveeprom.c new file mode 100644 index 000000000000..3b6cf034976a --- /dev/null +++ b/drivers/media/i2c/tveeprom.c @@ -0,0 +1,792 @@ +/* + * tveeprom - eeprom decoder for tvcard configuration eeproms + * + * Data and decoding routines shamelessly borrowed from bttv-cards.c + * eeprom access routine shamelessly borrowed from bttv-if.c + * which are: + + Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) + (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> + + * Adjustments to fit a more general model and all bugs: + + Copyright (C) 2003 John Klar <linpvr at projectplasma.com> + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/videodev2.h> +#include <linux/i2c.h> + +#include <media/tuner.h> +#include <media/tveeprom.h> +#include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver"); +MODULE_AUTHOR("John Klar"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define STRM(array, i) \ + (i < sizeof(array) / sizeof(char *) ? array[i] : "unknown") + +#define tveeprom_info(fmt, arg...) \ + v4l_printk(KERN_INFO, "tveeprom", c->adapter, c->addr, fmt , ## arg) +#define tveeprom_warn(fmt, arg...) \ + v4l_printk(KERN_WARNING, "tveeprom", c->adapter, c->addr, fmt , ## arg) +#define tveeprom_dbg(fmt, arg...) do { \ + if (debug) \ + v4l_printk(KERN_DEBUG, "tveeprom", \ + c->adapter, c->addr, fmt , ## arg); \ + } while (0) + +/* + * The Hauppauge eeprom uses an 8bit field to determine which + * tuner formats the tuner supports. + */ +static struct HAUPPAUGE_TUNER_FMT +{ + int id; + char *name; +} +hauppauge_tuner_fmt[] = +{ + { V4L2_STD_UNKNOWN, " UNKNOWN" }, + { V4L2_STD_UNKNOWN, " FM" }, + { V4L2_STD_B|V4L2_STD_GH, " PAL(B/G)" }, + { V4L2_STD_MN, " NTSC(M)" }, + { V4L2_STD_PAL_I, " PAL(I)" }, + { V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, " SECAM(L/L')" }, + { V4L2_STD_DK, " PAL(D/D1/K)" }, + { V4L2_STD_ATSC, " ATSC/DVB Digital" }, +}; + +/* This is the full list of possible tuners. Many thanks to Hauppauge for + supplying this information. Note that many tuners where only used for + testing and never made it to the outside world. So you will only see + a subset in actual produced cards. */ +static struct HAUPPAUGE_TUNER +{ + int id; + char *name; +} +hauppauge_tuner[] = +{ + /* 0-9 */ + { TUNER_ABSENT, "None" }, + { TUNER_ABSENT, "External" }, + { TUNER_ABSENT, "Unspecified" }, + { TUNER_PHILIPS_PAL, "Philips FI1216" }, + { TUNER_PHILIPS_SECAM, "Philips FI1216MF" }, + { TUNER_PHILIPS_NTSC, "Philips FI1236" }, + { TUNER_PHILIPS_PAL_I, "Philips FI1246" }, + { TUNER_PHILIPS_PAL_DK, "Philips FI1256" }, + { TUNER_PHILIPS_PAL, "Philips FI1216 MK2" }, + { TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" }, + /* 10-19 */ + { TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" }, + { TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" }, + { TUNER_PHILIPS_PAL_DK, "Philips FI1256 MK2" }, + { TUNER_TEMIC_NTSC, "Temic 4032FY5" }, + { TUNER_TEMIC_PAL, "Temic 4002FH5" }, + { TUNER_TEMIC_PAL_I, "Temic 4062FY5" }, + { TUNER_PHILIPS_PAL, "Philips FR1216 MK2" }, + { TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" }, + { TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" }, + { TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" }, + /* 20-29 */ + { TUNER_PHILIPS_PAL_DK, "Philips FR1256 MK2" }, + { TUNER_PHILIPS_PAL, "Philips FM1216" }, + { TUNER_PHILIPS_SECAM, "Philips FM1216MF" }, + { TUNER_PHILIPS_NTSC, "Philips FM1236" }, + { TUNER_PHILIPS_PAL_I, "Philips FM1246" }, + { TUNER_PHILIPS_PAL_DK, "Philips FM1256" }, + { TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" }, + { TUNER_ABSENT, "Samsung TCPN9082D" }, + { TUNER_ABSENT, "Samsung TCPM9092P" }, + { TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" }, + /* 30-39 */ + { TUNER_ABSENT, "Samsung TCPN9085D" }, + { TUNER_ABSENT, "Samsung TCPB9085P" }, + { TUNER_ABSENT, "Samsung TCPL9091P" }, + { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, + { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, + { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536D" }, + { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ + { TUNER_ABSENT, "Philips FI1256MP" }, + /* 40-49 */ + { TUNER_ABSENT, "Samsung TCPQ9091P" }, + { TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" }, + { TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" }, + { TUNER_TEMIC_4046FM5, "Temic 4046FM5" }, + { TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" }, + { TUNER_ABSENT, "Philips TD1536D FH 44"}, + { TUNER_LG_NTSC_FM, "LG TP18NSR01F"}, + { TUNER_LG_PAL_FM, "LG TP18PSB01D"}, + { TUNER_LG_PAL, "LG TP18PSB11D"}, + { TUNER_LG_PAL_I_FM, "LG TAPC-I001D"}, + /* 50-59 */ + { TUNER_LG_PAL_I, "LG TAPC-I701D"}, + { TUNER_ABSENT, "Temic 4042FI5"}, + { TUNER_MICROTUNE_4049FM5, "Microtune 4049 FM5"}, + { TUNER_ABSENT, "LG TPI8NSR11F"}, + { TUNER_ABSENT, "Microtune 4049 FM5 Alt I2C"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216ME MK3"}, + { TUNER_ABSENT, "Philips FI1236 MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216 ME MK3"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK3"}, + { TUNER_ABSENT, "Philips FM1216MP MK3"}, + /* 60-69 */ + { TUNER_PHILIPS_FM1216ME_MK3, "LG S001D MK3"}, + { TUNER_ABSENT, "LG M001D MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "LG S701D MK3"}, + { TUNER_ABSENT, "LG M701D MK3"}, + { TUNER_ABSENT, "Temic 4146FM5"}, + { TUNER_ABSENT, "Temic 4136FY5"}, + { TUNER_ABSENT, "Temic 4106FH5"}, + { TUNER_ABSENT, "Philips FQ1216LMP MK3"}, + { TUNER_LG_NTSC_TAPE, "LG TAPE H001F MK3"}, + { TUNER_LG_NTSC_TAPE, "LG TAPE H701F MK3"}, + /* 70-79 */ + { TUNER_ABSENT, "LG TALN H200T"}, + { TUNER_ABSENT, "LG TALN H250T"}, + { TUNER_ABSENT, "LG TALN M200T"}, + { TUNER_ABSENT, "LG TALN Z200T"}, + { TUNER_ABSENT, "LG TALN S200T"}, + { TUNER_ABSENT, "Thompson DTT7595"}, + { TUNER_ABSENT, "Thompson DTT7592"}, + { TUNER_ABSENT, "Silicon TDA8275C1 8290"}, + { TUNER_ABSENT, "Silicon TDA8275C1 8290 FM"}, + { TUNER_ABSENT, "Thompson DTT757"}, + /* 80-89 */ + { TUNER_PHILIPS_FQ1216LME_MK3, "Philips FQ1216LME MK3"}, + { TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"}, + { TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"}, + { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"}, + { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"}, + { TUNER_TCL_2002N, "TCL 2002N 6A"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FQ1236 MK3"}, + { TUNER_SAMSUNG_TCPN_2121P30A, "Samsung TCPN 2121P30A"}, + { TUNER_ABSENT, "Samsung TCPE 4121P30A"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"}, + /* 90-99 */ + { TUNER_ABSENT, "LG TALN H202T"}, + { TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"}, + { TUNER_PHILIPS_FQ1236A_MK4, "Philips FQ1236A MK4"}, + { TUNER_ABSENT, "Philips FQ1286A MK4"}, + { TUNER_ABSENT, "Philips FQ1216ME MK5"}, + { TUNER_ABSENT, "Philips FQ1236 MK5"}, + { TUNER_SAMSUNG_TCPG_6121P30A, "Samsung TCPG 6121P30A"}, + { TUNER_TCL_2002MB, "TCL 2002MB_3H"}, + { TUNER_ABSENT, "TCL 2002MI_3H"}, + { TUNER_TCL_2002N, "TCL 2002N 5H"}, + /* 100-109 */ + { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216ME"}, + { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, + { TUNER_ABSENT, "Panasonic ENV57H12D5"}, + { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"}, + { TUNER_PHILIPS_FM1236_MK3, "TCL MNM05-4"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"}, + { TUNER_ABSENT, "TCL MQNM05-4"}, + { TUNER_ABSENT, "LG TAPC-W701D"}, + { TUNER_ABSENT, "TCL 9886P-WM"}, + { TUNER_ABSENT, "TCL 1676NM-WM"}, + /* 110-119 */ + { TUNER_ABSENT, "Thompson DTT75105"}, + { TUNER_ABSENT, "Conexant_CX24109"}, + { TUNER_TCL_2002N, "TCL M2523_5N_E"}, + { TUNER_TCL_2002MB, "TCL M2523_3DB_E"}, + { TUNER_ABSENT, "Philips 8275A"}, + { TUNER_ABSENT, "Microtune MT2060"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK5"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216ME MK5"}, + { TUNER_ABSENT, "TCL M2523_3DI_E"}, + { TUNER_ABSENT, "Samsung THPD5222FG30A"}, + /* 120-129 */ + { TUNER_XC2028, "Xceive XC3028"}, + { TUNER_PHILIPS_FQ1216LME_MK3, "Philips FQ1216LME MK5"}, + { TUNER_ABSENT, "Philips FQD1216LME"}, + { TUNER_ABSENT, "Conexant CX24118A"}, + { TUNER_ABSENT, "TCL DMF11WIP"}, + { TUNER_ABSENT, "TCL MFNM05_4H_E"}, + { TUNER_ABSENT, "TCL MNM05_4H_E"}, + { TUNER_ABSENT, "TCL MPE05_2H_E"}, + { TUNER_ABSENT, "TCL MQNM05_4_U"}, + { TUNER_ABSENT, "TCL M2523_5NH_E"}, + /* 130-139 */ + { TUNER_ABSENT, "TCL M2523_3DBH_E"}, + { TUNER_ABSENT, "TCL M2523_3DIH_E"}, + { TUNER_ABSENT, "TCL MFPE05_2_U"}, + { TUNER_PHILIPS_FMD1216MEX_MK3, "Philips FMD1216MEX"}, + { TUNER_ABSENT, "Philips FRH2036B"}, + { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, + { TUNER_ABSENT, "MaxLinear MXL5005"}, + { TUNER_ABSENT, "MaxLinear MXL5003"}, + { TUNER_ABSENT, "Xceive XC2028"}, + { TUNER_ABSENT, "Microtune MT2131"}, + /* 140-149 */ + { TUNER_ABSENT, "Philips 8275A_8295"}, + { TUNER_ABSENT, "TCL MF02GIP_5N_E"}, + { TUNER_ABSENT, "TCL MF02GIP_3DB_E"}, + { TUNER_ABSENT, "TCL MF02GIP_3DI_E"}, + { TUNER_ABSENT, "Microtune MT2266"}, + { TUNER_ABSENT, "TCL MF10WPP_4N_E"}, + { TUNER_ABSENT, "LG TAPQ_H702F"}, + { TUNER_ABSENT, "TCL M09WPP_4N_E"}, + { TUNER_ABSENT, "MaxLinear MXL5005_v2"}, + { TUNER_PHILIPS_TDA8290, "Philips 18271_8295"}, + /* 150-159 */ + { TUNER_XC5000, "Xceive XC5000"}, + { TUNER_ABSENT, "Xceive XC3028L"}, + { TUNER_ABSENT, "NXP 18271C2_716x"}, + { TUNER_ABSENT, "Xceive XC4000"}, + { TUNER_ABSENT, "Dibcom 7070"}, + { TUNER_PHILIPS_TDA8290, "NXP 18271C2"}, + { TUNER_ABSENT, "Siano SMS1010"}, + { TUNER_ABSENT, "Siano SMS1150"}, + { TUNER_ABSENT, "MaxLinear 5007"}, + { TUNER_ABSENT, "TCL M09WPP_2P_E"}, + /* 160-169 */ + { TUNER_ABSENT, "Siano SMS1180"}, + { TUNER_ABSENT, "Maxim_MAX2165"}, + { TUNER_ABSENT, "Siano SMS1140"}, + { TUNER_ABSENT, "Siano SMS1150 B1"}, + { TUNER_ABSENT, "MaxLinear 111"}, + { TUNER_ABSENT, "Dibcom 7770"}, + { TUNER_ABSENT, "Siano SMS1180VNS"}, + { TUNER_ABSENT, "Siano SMS1184"}, + { TUNER_PHILIPS_FQ1236_MK5, "TCL M30WTP-4N-E"}, + { TUNER_ABSENT, "TCL_M11WPP_2PN_E"}, + /* 170-179 */ + { TUNER_ABSENT, "MaxLinear 301"}, + { TUNER_ABSENT, "Mirics MSi001"}, + { TUNER_ABSENT, "MaxLinear MxL241SF"}, + { TUNER_XC5000C, "Xceive XC5000C"}, + { TUNER_ABSENT, "Montage M68TS2020"}, + { TUNER_ABSENT, "Siano SMS1530"}, + { TUNER_ABSENT, "Dibcom 7090"}, + { TUNER_ABSENT, "Xceive XC5200C"}, + { TUNER_ABSENT, "NXP 18273"}, + { TUNER_ABSENT, "Montage M88TS2022"}, + /* 180-189 */ + { TUNER_ABSENT, "NXP 18272M"}, + { TUNER_ABSENT, "NXP 18272S"}, +}; + +/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are + * internal to a video chip, i.e. not a separate audio chip. */ +static struct HAUPPAUGE_AUDIOIC +{ + u32 id; + char *name; +} +audioIC[] = +{ + /* 0-4 */ + { V4L2_IDENT_NONE, "None" }, + { V4L2_IDENT_UNKNOWN, "TEA6300" }, + { V4L2_IDENT_UNKNOWN, "TEA6320" }, + { V4L2_IDENT_UNKNOWN, "TDA9850" }, + { V4L2_IDENT_MSPX4XX, "MSP3400C" }, + /* 5-9 */ + { V4L2_IDENT_MSPX4XX, "MSP3410D" }, + { V4L2_IDENT_MSPX4XX, "MSP3415" }, + { V4L2_IDENT_MSPX4XX, "MSP3430" }, + { V4L2_IDENT_MSPX4XX, "MSP3438" }, + { V4L2_IDENT_UNKNOWN, "CS5331" }, + /* 10-14 */ + { V4L2_IDENT_MSPX4XX, "MSP3435" }, + { V4L2_IDENT_MSPX4XX, "MSP3440" }, + { V4L2_IDENT_MSPX4XX, "MSP3445" }, + { V4L2_IDENT_MSPX4XX, "MSP3411" }, + { V4L2_IDENT_MSPX4XX, "MSP3416" }, + /* 15-19 */ + { V4L2_IDENT_MSPX4XX, "MSP3425" }, + { V4L2_IDENT_MSPX4XX, "MSP3451" }, + { V4L2_IDENT_MSPX4XX, "MSP3418" }, + { V4L2_IDENT_UNKNOWN, "Type 0x12" }, + { V4L2_IDENT_UNKNOWN, "OKI7716" }, + /* 20-24 */ + { V4L2_IDENT_MSPX4XX, "MSP4410" }, + { V4L2_IDENT_MSPX4XX, "MSP4420" }, + { V4L2_IDENT_MSPX4XX, "MSP4440" }, + { V4L2_IDENT_MSPX4XX, "MSP4450" }, + { V4L2_IDENT_MSPX4XX, "MSP4408" }, + /* 25-29 */ + { V4L2_IDENT_MSPX4XX, "MSP4418" }, + { V4L2_IDENT_MSPX4XX, "MSP4428" }, + { V4L2_IDENT_MSPX4XX, "MSP4448" }, + { V4L2_IDENT_MSPX4XX, "MSP4458" }, + { V4L2_IDENT_MSPX4XX, "Type 0x1d" }, + /* 30-34 */ + { V4L2_IDENT_AMBIGUOUS, "CX880" }, + { V4L2_IDENT_AMBIGUOUS, "CX881" }, + { V4L2_IDENT_AMBIGUOUS, "CX883" }, + { V4L2_IDENT_AMBIGUOUS, "CX882" }, + { V4L2_IDENT_AMBIGUOUS, "CX25840" }, + /* 35-39 */ + { V4L2_IDENT_AMBIGUOUS, "CX25841" }, + { V4L2_IDENT_AMBIGUOUS, "CX25842" }, + { V4L2_IDENT_AMBIGUOUS, "CX25843" }, + { V4L2_IDENT_AMBIGUOUS, "CX23418" }, + { V4L2_IDENT_AMBIGUOUS, "CX23885" }, + /* 40-44 */ + { V4L2_IDENT_AMBIGUOUS, "CX23888" }, + { V4L2_IDENT_AMBIGUOUS, "SAA7131" }, + { V4L2_IDENT_AMBIGUOUS, "CX23887" }, + { V4L2_IDENT_AMBIGUOUS, "SAA7164" }, + { V4L2_IDENT_AMBIGUOUS, "AU8522" }, +}; + +/* This list is supplied by Hauppauge. Thanks! */ +static const char *decoderIC[] = { + /* 0-4 */ + "None", "BT815", "BT817", "BT819", "BT815A", + /* 5-9 */ + "BT817A", "BT819A", "BT827", "BT829", "BT848", + /* 10-14 */ + "BT848A", "BT849A", "BT829A", "BT827A", "BT878", + /* 15-19 */ + "BT879", "BT880", "VPX3226E", "SAA7114", "SAA7115", + /* 20-24 */ + "CX880", "CX881", "CX883", "SAA7111", "SAA7113", + /* 25-29 */ + "CX882", "TVP5150A", "CX25840", "CX25841", "CX25842", + /* 30-34 */ + "CX25843", "CX23418", "NEC61153", "CX23885", "CX23888", + /* 35-39 */ + "SAA7131", "CX25837", "CX23887", "CX23885A", "CX23887A", + /* 40-42 */ + "SAA7164", "CX23885B", "AU8522" +}; + +static int hasRadioTuner(int tunerType) +{ + switch (tunerType) { + case 18: /* PNPEnv_TUNER_FR1236_MK2 */ + case 23: /* PNPEnv_TUNER_FM1236 */ + case 38: /* PNPEnv_TUNER_FMR1236 */ + case 16: /* PNPEnv_TUNER_FR1216_MK2 */ + case 19: /* PNPEnv_TUNER_FR1246_MK2 */ + case 21: /* PNPEnv_TUNER_FM1216 */ + case 24: /* PNPEnv_TUNER_FM1246 */ + case 17: /* PNPEnv_TUNER_FR1216MF_MK2 */ + case 22: /* PNPEnv_TUNER_FM1216MF */ + case 20: /* PNPEnv_TUNER_FR1256_MK2 */ + case 25: /* PNPEnv_TUNER_FM1256 */ + case 33: /* PNPEnv_TUNER_4039FR5 */ + case 42: /* PNPEnv_TUNER_4009FR5 */ + case 52: /* PNPEnv_TUNER_4049FM5 */ + case 54: /* PNPEnv_TUNER_4049FM5_AltI2C */ + case 44: /* PNPEnv_TUNER_4009FN5 */ + case 31: /* PNPEnv_TUNER_TCPB9085P */ + case 30: /* PNPEnv_TUNER_TCPN9085D */ + case 46: /* PNPEnv_TUNER_TP18NSR01F */ + case 47: /* PNPEnv_TUNER_TP18PSB01D */ + case 49: /* PNPEnv_TUNER_TAPC_I001D */ + case 60: /* PNPEnv_TUNER_TAPE_S001D_MK3 */ + case 57: /* PNPEnv_TUNER_FM1216ME_MK3 */ + case 59: /* PNPEnv_TUNER_FM1216MP_MK3 */ + case 58: /* PNPEnv_TUNER_FM1236_MK3 */ + case 68: /* PNPEnv_TUNER_TAPE_H001F_MK3 */ + case 61: /* PNPEnv_TUNER_TAPE_M001D_MK3 */ + case 78: /* PNPEnv_TUNER_TDA8275C1_8290_FM */ + case 89: /* PNPEnv_TUNER_TCL_MFPE05_2 */ + case 92: /* PNPEnv_TUNER_PHILIPS_FQ1236A_MK4 */ + case 105: + return 1; + } + return 0; +} + +void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, + unsigned char *eeprom_data) +{ + /* ---------------------------------------------- + ** The hauppauge eeprom format is tagged + ** + ** if packet[0] == 0x84, then packet[0..1] == length + ** else length = packet[0] & 3f; + ** if packet[0] & f8 == f8, then EOD and packet[1] == checksum + ** + ** In our (ivtv) case we're interested in the following: + ** tuner type: tag [00].05 or [0a].01 (index into hauppauge_tuner) + ** tuner fmts: tag [00].04 or [0a].00 (bitmask index into + ** hauppauge_tuner_fmt) + ** radio: tag [00].{last} or [0e].00 (bitmask. bit2=FM) + ** audio proc: tag [02].01 or [05].00 (mask with 0x7f) + ** decoder proc: tag [09].01) + + ** Fun info: + ** model: tag [00].07-08 or [06].00-01 + ** revision: tag [00].09-0b or [06].04-06 + ** serial#: tag [01].05-07 or [04].04-06 + + ** # of inputs/outputs ??? + */ + + int i, j, len, done, beenhere, tag, start; + + int tuner1 = 0, t_format1 = 0, audioic = -1; + char *t_name1 = NULL; + const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" }; + + int tuner2 = 0, t_format2 = 0; + char *t_name2 = NULL; + const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; + + memset(tvee, 0, sizeof(*tvee)); + tvee->tuner_type = TUNER_ABSENT; + tvee->tuner2_type = TUNER_ABSENT; + + done = len = beenhere = 0; + + /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ + if (eeprom_data[0] == 0x1a && + eeprom_data[1] == 0xeb && + eeprom_data[2] == 0x67 && + eeprom_data[3] == 0x95) + start = 0xa0; /* Generic em28xx offset */ + else if ((eeprom_data[0] & 0xe1) == 0x01 && + eeprom_data[1] == 0x00 && + eeprom_data[2] == 0x00 && + eeprom_data[8] == 0x84) + start = 8; /* Generic cx2388x offset */ + else if (eeprom_data[1] == 0x70 && + eeprom_data[2] == 0x00 && + eeprom_data[4] == 0x74 && + eeprom_data[8] == 0x84) + start = 8; /* Generic cx23418 offset (models 74xxx) */ + else + start = 0; + + for (i = start; !done && i < 256; i += len) { + if (eeprom_data[i] == 0x84) { + len = eeprom_data[i + 1] + (eeprom_data[i + 2] << 8); + i += 3; + } else if ((eeprom_data[i] & 0xf0) == 0x70) { + if (eeprom_data[i] & 0x08) { + /* verify checksum! */ + done = 1; + break; + } + len = eeprom_data[i] & 0x07; + ++i; + } else { + tveeprom_warn("Encountered bad packet header [%02x]. " + "Corrupt or not a Hauppauge eeprom.\n", + eeprom_data[i]); + return; + } + + if (debug) { + tveeprom_info("Tag [%02x] + %d bytes:", + eeprom_data[i], len - 1); + for (j = 1; j < len; j++) + printk(KERN_CONT " %02x", eeprom_data[i + j]); + printk(KERN_CONT "\n"); + } + + /* process by tag */ + tag = eeprom_data[i]; + switch (tag) { + case 0x00: + /* tag: 'Comprehensive' */ + tuner1 = eeprom_data[i+6]; + t_format1 = eeprom_data[i+5]; + tvee->has_radio = eeprom_data[i+len-1]; + /* old style tag, don't know how to detect + IR presence, mark as unknown. */ + tvee->has_ir = 0; + tvee->model = + eeprom_data[i+8] + + (eeprom_data[i+9] << 8); + tvee->revision = eeprom_data[i+10] + + (eeprom_data[i+11] << 8) + + (eeprom_data[i+12] << 16); + break; + + case 0x01: + /* tag: 'SerialID' */ + tvee->serial_number = + eeprom_data[i+6] + + (eeprom_data[i+7] << 8) + + (eeprom_data[i+8] << 16); + break; + + case 0x02: + /* tag 'AudioInfo' + Note mask with 0x7F, high bit used on some older models + to indicate 4052 mux was removed in favor of using MSP + inputs directly. */ + audioic = eeprom_data[i+2] & 0x7f; + if (audioic < ARRAY_SIZE(audioIC)) + tvee->audio_processor = audioIC[audioic].id; + else + tvee->audio_processor = V4L2_IDENT_UNKNOWN; + break; + + /* case 0x03: tag 'EEInfo' */ + + case 0x04: + /* tag 'SerialID2' */ + tvee->serial_number = + eeprom_data[i+5] + + (eeprom_data[i+6] << 8) + + (eeprom_data[i+7] << 16); + + if ((eeprom_data[i + 8] & 0xf0) && + (tvee->serial_number < 0xffffff)) { + tvee->MAC_address[0] = 0x00; + tvee->MAC_address[1] = 0x0D; + tvee->MAC_address[2] = 0xFE; + tvee->MAC_address[3] = eeprom_data[i + 7]; + tvee->MAC_address[4] = eeprom_data[i + 6]; + tvee->MAC_address[5] = eeprom_data[i + 5]; + tvee->has_MAC_address = 1; + } + break; + + case 0x05: + /* tag 'Audio2' + Note mask with 0x7F, high bit used on some older models + to indicate 4052 mux was removed in favor of using MSP + inputs directly. */ + audioic = eeprom_data[i+1] & 0x7f; + if (audioic < ARRAY_SIZE(audioIC)) + tvee->audio_processor = audioIC[audioic].id; + else + tvee->audio_processor = V4L2_IDENT_UNKNOWN; + + break; + + case 0x06: + /* tag 'ModelRev' */ + tvee->model = + eeprom_data[i + 1] + + (eeprom_data[i + 2] << 8) + + (eeprom_data[i + 3] << 16) + + (eeprom_data[i + 4] << 24); + tvee->revision = + eeprom_data[i + 5] + + (eeprom_data[i + 6] << 8) + + (eeprom_data[i + 7] << 16); + break; + + case 0x07: + /* tag 'Details': according to Hauppauge not interesting + on any PCI-era or later boards. */ + break; + + /* there is no tag 0x08 defined */ + + case 0x09: + /* tag 'Video' */ + tvee->decoder_processor = eeprom_data[i + 1]; + break; + + case 0x0a: + /* tag 'Tuner' */ + if (beenhere == 0) { + tuner1 = eeprom_data[i + 2]; + t_format1 = eeprom_data[i + 1]; + beenhere = 1; + } else { + /* a second (radio) tuner may be present */ + tuner2 = eeprom_data[i + 2]; + t_format2 = eeprom_data[i + 1]; + /* not a TV tuner? */ + if (t_format2 == 0) + tvee->has_radio = 1; /* must be radio */ + } + break; + + case 0x0b: + /* tag 'Inputs': according to Hauppauge this is specific + to each driver family, so no good assumptions can be + made. */ + break; + + /* case 0x0c: tag 'Balun' */ + /* case 0x0d: tag 'Teletext' */ + + case 0x0e: + /* tag: 'Radio' */ + tvee->has_radio = eeprom_data[i+1]; + break; + + case 0x0f: + /* tag 'IRInfo' */ + tvee->has_ir = 1 | (eeprom_data[i+1] << 1); + break; + + /* case 0x10: tag 'VBIInfo' */ + /* case 0x11: tag 'QCInfo' */ + /* case 0x12: tag 'InfoBits' */ + + default: + tveeprom_dbg("Not sure what to do with tag [%02x]\n", + tag); + /* dump the rest of the packet? */ + } + } + + if (!done) { + tveeprom_warn("Ran out of data!\n"); + return; + } + + if (tvee->revision != 0) { + tvee->rev_str[0] = 32 + ((tvee->revision >> 18) & 0x3f); + tvee->rev_str[1] = 32 + ((tvee->revision >> 12) & 0x3f); + tvee->rev_str[2] = 32 + ((tvee->revision >> 6) & 0x3f); + tvee->rev_str[3] = 32 + (tvee->revision & 0x3f); + tvee->rev_str[4] = 0; + } + + if (hasRadioTuner(tuner1) && !tvee->has_radio) { + tveeprom_info("The eeprom says no radio is present, but the tuner type\n"); + tveeprom_info("indicates otherwise. I will assume that radio is present.\n"); + tvee->has_radio = 1; + } + + if (tuner1 < ARRAY_SIZE(hauppauge_tuner)) { + tvee->tuner_type = hauppauge_tuner[tuner1].id; + t_name1 = hauppauge_tuner[tuner1].name; + } else { + t_name1 = "unknown"; + } + + if (tuner2 < ARRAY_SIZE(hauppauge_tuner)) { + tvee->tuner2_type = hauppauge_tuner[tuner2].id; + t_name2 = hauppauge_tuner[tuner2].name; + } else { + t_name2 = "unknown"; + } + + tvee->tuner_hauppauge_model = tuner1; + tvee->tuner2_hauppauge_model = tuner2; + tvee->tuner_formats = 0; + tvee->tuner2_formats = 0; + for (i = j = 0; i < 8; i++) { + if (t_format1 & (1 << i)) { + tvee->tuner_formats |= hauppauge_tuner_fmt[i].id; + t_fmt_name1[j++] = hauppauge_tuner_fmt[i].name; + } + } + for (i = j = 0; i < 8; i++) { + if (t_format2 & (1 << i)) { + tvee->tuner2_formats |= hauppauge_tuner_fmt[i].id; + t_fmt_name2[j++] = hauppauge_tuner_fmt[i].name; + } + } + + tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n", + tvee->model, tvee->rev_str, tvee->serial_number); + if (tvee->has_MAC_address == 1) + tveeprom_info("MAC address is %pM\n", tvee->MAC_address); + tveeprom_info("tuner model is %s (idx %d, type %d)\n", + t_name1, tuner1, tvee->tuner_type); + tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], + t_fmt_name1[3], t_fmt_name1[4], t_fmt_name1[5], + t_fmt_name1[6], t_fmt_name1[7], t_format1); + if (tuner2) + tveeprom_info("second tuner model is %s (idx %d, type %d)\n", + t_name2, tuner2, tvee->tuner2_type); + if (t_format2) + tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], + t_fmt_name2[3], t_fmt_name2[4], t_fmt_name2[5], + t_fmt_name2[6], t_fmt_name2[7], t_format2); + if (audioic < 0) { + tveeprom_info("audio processor is unknown (no idx)\n"); + tvee->audio_processor = V4L2_IDENT_UNKNOWN; + } else { + if (audioic < ARRAY_SIZE(audioIC)) + tveeprom_info("audio processor is %s (idx %d)\n", + audioIC[audioic].name, audioic); + else + tveeprom_info("audio processor is unknown (idx %d)\n", + audioic); + } + if (tvee->decoder_processor) + tveeprom_info("decoder processor is %s (idx %d)\n", + STRM(decoderIC, tvee->decoder_processor), + tvee->decoder_processor); + if (tvee->has_ir) + tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n", + tvee->has_radio ? "" : "no ", + (tvee->has_ir & 2) ? "" : "no ", + (tvee->has_ir & 4) ? "" : "no "); + else + tveeprom_info("has %sradio\n", + tvee->has_radio ? "" : "no "); +} +EXPORT_SYMBOL(tveeprom_hauppauge_analog); + +/* ----------------------------------------------------------------------- */ +/* generic helper functions */ + +int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) +{ + unsigned char buf; + int err; + + buf = 0; + err = i2c_master_send(c, &buf, 1); + if (err != 1) { + tveeprom_info("Huh, no eeprom present (err=%d)?\n", err); + return -1; + } + err = i2c_master_recv(c, eedata, len); + if (err != len) { + tveeprom_warn("i2c eeprom read error (err=%d)\n", err); + return -1; + } + if (debug) { + int i; + + tveeprom_info("full 256-byte eeprom dump:\n"); + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + tveeprom_info("%02x:", i); + printk(KERN_CONT " %02x", eedata[i]); + if (15 == (i % 16)) + printk(KERN_CONT "\n"); + } + } + return 0; +} +EXPORT_SYMBOL(tveeprom_read); + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c new file mode 100644 index 000000000000..1f3943bb87d5 --- /dev/null +++ b/drivers/media/i2c/tvp514x.c @@ -0,0 +1,1166 @@ +/* + * drivers/media/i2c/tvp514x.c + * + * TI TVP5146/47 decoder driver + * + * Copyright (C) 2008 Texas Instruments Inc + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Contributors: + * Sivaraj R <sivaraj@ti.com> + * Brijesh R Jadav <brijesh.j@ti.com> + * Hardik Shah <hardik.shah@ti.com> + * Manjunath Hadli <mrh@ti.com> + * Karicheri Muralidharan <m-karicheri2@ti.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/videodev2.h> +#include <linux/module.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-common.h> +#include <media/v4l2-mediabus.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/tvp514x.h> + +#include "tvp514x_regs.h" + +/* Module Name */ +#define TVP514X_MODULE_NAME "tvp514x" + +/* Private macros for TVP */ +#define I2C_RETRY_COUNT (5) +#define LOCK_RETRY_COUNT (5) +#define LOCK_RETRY_DELAY (200) + +/* Debug functions */ +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TVP514X linux decoder driver"); +MODULE_LICENSE("GPL"); + +/* enum tvp514x_std - enum for supported standards */ +enum tvp514x_std { + STD_NTSC_MJ = 0, + STD_PAL_BDGHIN, + STD_INVALID +}; + +/** + * struct tvp514x_std_info - Structure to store standard informations + * @width: Line width in pixels + * @height:Number of active lines + * @video_std: Value to write in REG_VIDEO_STD register + * @standard: v4l2 standard structure information + */ +struct tvp514x_std_info { + unsigned long width; + unsigned long height; + u8 video_std; + struct v4l2_standard standard; +}; + +static struct tvp514x_reg tvp514x_reg_list_default[0x40]; + +static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable); +/** + * struct tvp514x_decoder - TVP5146/47 decoder object + * @sd: Subdevice Slave handle + * @tvp514x_regs: copy of hw's regs with preset values. + * @pdata: Board specific + * @ver: Chip version + * @streaming: TVP5146/47 decoder streaming - enabled or disabled. + * @current_std: Current standard + * @num_stds: Number of standards + * @std_list: Standards list + * @input: Input routing at chip level + * @output: Output routing at chip level + */ +struct tvp514x_decoder { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; + const struct tvp514x_platform_data *pdata; + + int ver; + int streaming; + + enum tvp514x_std current_std; + int num_stds; + const struct tvp514x_std_info *std_list; + /* Input and Output Routing parameters */ + u32 input; + u32 output; +}; + +/* TVP514x default register values */ +static struct tvp514x_reg tvp514x_reg_list_default[] = { + /* Composite selected */ + {TOK_WRITE, REG_INPUT_SEL, 0x05}, + {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, + /* Auto mode */ + {TOK_WRITE, REG_VIDEO_STD, 0x00}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F}, + {TOK_WRITE, REG_COLOR_KILLER, 0x10}, + {TOK_WRITE, REG_LUMA_CONTROL1, 0x00}, + {TOK_WRITE, REG_LUMA_CONTROL2, 0x00}, + {TOK_WRITE, REG_LUMA_CONTROL3, 0x02}, + {TOK_WRITE, REG_BRIGHTNESS, 0x80}, + {TOK_WRITE, REG_CONTRAST, 0x80}, + {TOK_WRITE, REG_SATURATION, 0x80}, + {TOK_WRITE, REG_HUE, 0x00}, + {TOK_WRITE, REG_CHROMA_CONTROL1, 0x00}, + {TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E}, + /* Reserved */ + {TOK_SKIP, 0x0F, 0x00}, + {TOK_WRITE, REG_COMP_PR_SATURATION, 0x80}, + {TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80}, + {TOK_WRITE, REG_COMP_PB_SATURATION, 0x80}, + /* Reserved */ + {TOK_SKIP, 0x13, 0x00}, + {TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80}, + /* Reserved */ + {TOK_SKIP, 0x15, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55}, + {TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00}, + {TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25}, + {TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03}, + /* NTSC timing */ + {TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00}, + {TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00}, + {TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40}, + {TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04}, + {TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00}, + {TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07}, + {TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01}, + {TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00}, + {TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15}, + {TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x26, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x27, 0x00}, + {TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC}, + /* Reserved */ + {TOK_SKIP, 0x29, 0x00}, + {TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x2B, 0x00}, + {TOK_SKIP, REG_SCART_DELAY, 0x00}, + {TOK_SKIP, REG_CTI_DELAY, 0x00}, + {TOK_SKIP, REG_CTI_CONTROL, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x2F, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x30, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x31, 0x00}, + /* HS, VS active high */ + {TOK_WRITE, REG_SYNC_CONTROL, 0x00}, + /* 10-bit BT.656 */ + {TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00}, + /* Enable clk & data */ + {TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11}, + /* Enable AVID & FLD */ + {TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE}, + /* Enable VS & HS */ + {TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF}, + {TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF}, + {TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF}, + /* Clear status */ + {TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01}, + {TOK_TERM, 0, 0}, +}; + +/** + * Supported standards - + * + * Currently supports two standards only, need to add support for rest of the + * modes, like SECAM, etc... + */ +static const struct tvp514x_std_info tvp514x_std_list[] = { + /* Standard: STD_NTSC_MJ */ + [STD_NTSC_MJ] = { + .width = NTSC_NUM_ACTIVE_PIXELS, + .height = NTSC_NUM_ACTIVE_LINES, + .video_std = VIDEO_STD_NTSC_MJ_BIT, + .standard = { + .index = 0, + .id = V4L2_STD_NTSC, + .name = "NTSC", + .frameperiod = {1001, 30000}, + .framelines = 525 + }, + /* Standard: STD_PAL_BDGHIN */ + }, + [STD_PAL_BDGHIN] = { + .width = PAL_NUM_ACTIVE_PIXELS, + .height = PAL_NUM_ACTIVE_LINES, + .video_std = VIDEO_STD_PAL_BDGHIN_BIT, + .standard = { + .index = 1, + .id = V4L2_STD_PAL, + .name = "PAL", + .frameperiod = {1, 25}, + .framelines = 625 + }, + }, + /* Standard: need to add for additional standard */ +}; + + +static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp514x_decoder, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd; +} + + +/** + * tvp514x_read_reg() - Read a value from a register in an TVP5146/47. + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + * + * Returns value read if successful, or non-zero (-1) otherwise. + */ +static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg) +{ + int err, retry = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + +read_again: + + err = i2c_smbus_read_byte_data(client, reg); + if (err < 0) { + if (retry <= I2C_RETRY_COUNT) { + v4l2_warn(sd, "Read: retry ... %d\n", retry); + retry++; + msleep_interruptible(10); + goto read_again; + } + } + + return err; +} + +/** + * dump_reg() - dump the register content of TVP5146/47. + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + */ +static void dump_reg(struct v4l2_subdev *sd, u8 reg) +{ + u32 val; + + val = tvp514x_read_reg(sd, reg); + v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val); +} + +/** + * tvp514x_write_reg() - Write a value to a register in TVP5146/47 + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + * @val: value to be written to the register + * + * Write a value to a register in an TVP5146/47 decoder device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + int err, retry = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + +write_again: + + err = i2c_smbus_write_byte_data(client, reg, val); + if (err) { + if (retry <= I2C_RETRY_COUNT) { + v4l2_warn(sd, "Write: retry ... %d\n", retry); + retry++; + msleep_interruptible(10); + goto write_again; + } + } + + return err; +} + +/** + * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers + * @sd: ptr to v4l2_subdev struct + * @reglist: list of TVP5146/47 registers and values + * + * Initializes a list of TVP5146/47 registers:- + * if token is TOK_TERM, then entire write operation terminates + * if token is TOK_DELAY, then a delay of 'val' msec is introduced + * if token is TOK_SKIP, then the register write is skipped + * if token is TOK_WRITE, then the register write is performed + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp514x_write_regs(struct v4l2_subdev *sd, + const struct tvp514x_reg reglist[]) +{ + int err; + const struct tvp514x_reg *next = reglist; + + for (; next->token != TOK_TERM; next++) { + if (next->token == TOK_DELAY) { + msleep(next->val); + continue; + } + + if (next->token == TOK_SKIP) + continue; + + err = tvp514x_write_reg(sd, next->reg, (u8) next->val); + if (err) { + v4l2_err(sd, "Write failed. Err[%d]\n", err); + return err; + } + } + return 0; +} + +/** + * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47 + * @sd: ptr to v4l2_subdev struct + * + * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no + * standard detected. + */ +static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd) +{ + u8 std, std_status; + + std = tvp514x_read_reg(sd, REG_VIDEO_STD); + if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT) + /* use the standard status register */ + std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS); + else + /* use the standard register itself */ + std_status = std; + + switch (std_status & VIDEO_STD_MASK) { + case VIDEO_STD_NTSC_MJ_BIT: + return STD_NTSC_MJ; + + case VIDEO_STD_PAL_BDGHIN_BIT: + return STD_PAL_BDGHIN; + + default: + return STD_INVALID; + } + + return STD_INVALID; +} + +/* TVP5146/47 register dump function */ +static void tvp514x_reg_dump(struct v4l2_subdev *sd) +{ + dump_reg(sd, REG_INPUT_SEL); + dump_reg(sd, REG_AFE_GAIN_CTRL); + dump_reg(sd, REG_VIDEO_STD); + dump_reg(sd, REG_OPERATION_MODE); + dump_reg(sd, REG_COLOR_KILLER); + dump_reg(sd, REG_LUMA_CONTROL1); + dump_reg(sd, REG_LUMA_CONTROL2); + dump_reg(sd, REG_LUMA_CONTROL3); + dump_reg(sd, REG_BRIGHTNESS); + dump_reg(sd, REG_CONTRAST); + dump_reg(sd, REG_SATURATION); + dump_reg(sd, REG_HUE); + dump_reg(sd, REG_CHROMA_CONTROL1); + dump_reg(sd, REG_CHROMA_CONTROL2); + dump_reg(sd, REG_COMP_PR_SATURATION); + dump_reg(sd, REG_COMP_Y_CONTRAST); + dump_reg(sd, REG_COMP_PB_SATURATION); + dump_reg(sd, REG_COMP_Y_BRIGHTNESS); + dump_reg(sd, REG_AVID_START_PIXEL_LSB); + dump_reg(sd, REG_AVID_START_PIXEL_MSB); + dump_reg(sd, REG_AVID_STOP_PIXEL_LSB); + dump_reg(sd, REG_AVID_STOP_PIXEL_MSB); + dump_reg(sd, REG_HSYNC_START_PIXEL_LSB); + dump_reg(sd, REG_HSYNC_START_PIXEL_MSB); + dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB); + dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB); + dump_reg(sd, REG_VSYNC_START_LINE_LSB); + dump_reg(sd, REG_VSYNC_START_LINE_MSB); + dump_reg(sd, REG_VSYNC_STOP_LINE_LSB); + dump_reg(sd, REG_VSYNC_STOP_LINE_MSB); + dump_reg(sd, REG_VBLK_START_LINE_LSB); + dump_reg(sd, REG_VBLK_START_LINE_MSB); + dump_reg(sd, REG_VBLK_STOP_LINE_LSB); + dump_reg(sd, REG_VBLK_STOP_LINE_MSB); + dump_reg(sd, REG_SYNC_CONTROL); + dump_reg(sd, REG_OUTPUT_FORMATTER1); + dump_reg(sd, REG_OUTPUT_FORMATTER2); + dump_reg(sd, REG_OUTPUT_FORMATTER3); + dump_reg(sd, REG_OUTPUT_FORMATTER4); + dump_reg(sd, REG_OUTPUT_FORMATTER5); + dump_reg(sd, REG_OUTPUT_FORMATTER6); + dump_reg(sd, REG_CLEAR_LOST_LOCK); +} + +/** + * tvp514x_configure() - Configure the TVP5146/47 registers + * @sd: ptr to v4l2_subdev struct + * @decoder: ptr to tvp514x_decoder structure + * + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp514x_configure(struct v4l2_subdev *sd, + struct tvp514x_decoder *decoder) +{ + int err; + + /* common register initialization */ + err = + tvp514x_write_regs(sd, decoder->tvp514x_regs); + if (err) + return err; + + if (debug) + tvp514x_reg_dump(sd); + + return 0; +} + +/** + * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision. + * @sd: pointer to standard V4L2 sub-device structure + * @decoder: pointer to tvp514x_decoder structure + * + * A device is considered to be detected if the chip ID (LSB and MSB) + * registers match the expected values. + * Any value of the rom version register is accepted. + * Returns ENODEV error number if no device is detected, or zero + * if a device is detected. + */ +static int tvp514x_detect(struct v4l2_subdev *sd, + struct tvp514x_decoder *decoder) +{ + u8 chip_id_msb, chip_id_lsb, rom_ver; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB); + chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB); + rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION); + + v4l2_dbg(1, debug, sd, + "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n", + chip_id_msb, chip_id_lsb, rom_ver); + if ((chip_id_msb != TVP514X_CHIP_ID_MSB) + || ((chip_id_lsb != TVP5146_CHIP_ID_LSB) + && (chip_id_lsb != TVP5147_CHIP_ID_LSB))) { + /* We didn't read the values we expected, so this must not be + * an TVP5146/47. + */ + v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n", + chip_id_msb, chip_id_lsb); + return -ENODEV; + } + + decoder->ver = rom_ver; + + v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n", + client->name, decoder->ver, + client->addr << 1, client->adapter->name); + return 0; +} + +/** + * tvp514x_querystd() - V4L2 decoder interface handler for querystd + * @sd: pointer to standard V4L2 sub-device structure + * @std_id: standard V4L2 std_id ioctl enum + * + * Returns the current standard detected by TVP5146/47. If no active input is + * detected then *std_id is set to 0 and the function returns 0. + */ +static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + enum tvp514x_std current_std; + enum tvp514x_input input_sel; + u8 sync_lock_status, lock_mask; + + if (std_id == NULL) + return -EINVAL; + + *std_id = V4L2_STD_UNKNOWN; + + /* query the current standard */ + current_std = tvp514x_query_current_std(sd); + if (current_std == STD_INVALID) + return 0; + + input_sel = decoder->input; + + switch (input_sel) { + case INPUT_CVBS_VI1A: + case INPUT_CVBS_VI1B: + case INPUT_CVBS_VI1C: + case INPUT_CVBS_VI2A: + case INPUT_CVBS_VI2B: + case INPUT_CVBS_VI2C: + case INPUT_CVBS_VI3A: + case INPUT_CVBS_VI3B: + case INPUT_CVBS_VI3C: + case INPUT_CVBS_VI4A: + lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT | + STATUS_HORZ_SYNC_LOCK_BIT | + STATUS_VIRT_SYNC_LOCK_BIT; + break; + + case INPUT_SVIDEO_VI2A_VI1A: + case INPUT_SVIDEO_VI2B_VI1B: + case INPUT_SVIDEO_VI2C_VI1C: + case INPUT_SVIDEO_VI2A_VI3A: + case INPUT_SVIDEO_VI2B_VI3B: + case INPUT_SVIDEO_VI2C_VI3C: + case INPUT_SVIDEO_VI4A_VI1A: + case INPUT_SVIDEO_VI4A_VI1B: + case INPUT_SVIDEO_VI4A_VI1C: + case INPUT_SVIDEO_VI4A_VI3A: + case INPUT_SVIDEO_VI4A_VI3B: + case INPUT_SVIDEO_VI4A_VI3C: + lock_mask = STATUS_HORZ_SYNC_LOCK_BIT | + STATUS_VIRT_SYNC_LOCK_BIT; + break; + /*Need to add other interfaces*/ + default: + return -EINVAL; + } + /* check whether signal is locked */ + sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1); + if (lock_mask != (sync_lock_status & lock_mask)) + return 0; /* No input detected */ + + *std_id = decoder->std_list[current_std].standard.id; + + v4l2_dbg(1, debug, sd, "Current STD: %s\n", + decoder->std_list[current_std].standard.name); + return 0; +} + +/** + * tvp514x_s_std() - V4L2 decoder interface handler for s_std + * @sd: pointer to standard V4L2 sub-device structure + * @std_id: standard V4L2 v4l2_std_id ioctl enum + * + * If std_id is supported, sets the requested standard. Otherwise, returns + * -EINVAL + */ +static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + int err, i; + + for (i = 0; i < decoder->num_stds; i++) + if (std_id & decoder->std_list[i].standard.id) + break; + + if ((i == decoder->num_stds) || (i == STD_INVALID)) + return -EINVAL; + + err = tvp514x_write_reg(sd, REG_VIDEO_STD, + decoder->std_list[i].video_std); + if (err) + return err; + + decoder->current_std = i; + decoder->tvp514x_regs[REG_VIDEO_STD].val = + decoder->std_list[i].video_std; + + v4l2_dbg(1, debug, sd, "Standard set to: %s\n", + decoder->std_list[i].standard.name); + return 0; +} + +/** + * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing + * @sd: pointer to standard V4L2 sub-device structure + * @input: input selector for routing the signal + * @output: output selector for routing the signal + * @config: config value. Not used + * + * If index is valid, selects the requested input. Otherwise, returns -EINVAL if + * the input is not supported or there is no active signal present in the + * selected input. + */ +static int tvp514x_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + int err; + enum tvp514x_input input_sel; + enum tvp514x_output output_sel; + u8 sync_lock_status, lock_mask; + int try_count = LOCK_RETRY_COUNT; + + if ((input >= INPUT_INVALID) || + (output >= OUTPUT_INVALID)) + /* Index out of bound */ + return -EINVAL; + + /* + * For the sequence streamon -> streamoff and again s_input + * it fails to lock the signal, since streamoff puts TVP514x + * into power off state which leads to failure in sub-sequent s_input. + * + * So power up the TVP514x device here, since it is important to lock + * the signal at this stage. + */ + if (!decoder->streaming) + tvp514x_s_stream(sd, 1); + + input_sel = input; + output_sel = output; + + err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel); + if (err) + return err; + + output_sel |= tvp514x_read_reg(sd, + REG_OUTPUT_FORMATTER1) & 0x7; + err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1, + output_sel); + if (err) + return err; + + decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; + + /* Clear status */ + msleep(LOCK_RETRY_DELAY); + err = + tvp514x_write_reg(sd, REG_CLEAR_LOST_LOCK, 0x01); + if (err) + return err; + + switch (input_sel) { + case INPUT_CVBS_VI1A: + case INPUT_CVBS_VI1B: + case INPUT_CVBS_VI1C: + case INPUT_CVBS_VI2A: + case INPUT_CVBS_VI2B: + case INPUT_CVBS_VI2C: + case INPUT_CVBS_VI3A: + case INPUT_CVBS_VI3B: + case INPUT_CVBS_VI3C: + case INPUT_CVBS_VI4A: + lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT | + STATUS_HORZ_SYNC_LOCK_BIT | + STATUS_VIRT_SYNC_LOCK_BIT; + break; + + case INPUT_SVIDEO_VI2A_VI1A: + case INPUT_SVIDEO_VI2B_VI1B: + case INPUT_SVIDEO_VI2C_VI1C: + case INPUT_SVIDEO_VI2A_VI3A: + case INPUT_SVIDEO_VI2B_VI3B: + case INPUT_SVIDEO_VI2C_VI3C: + case INPUT_SVIDEO_VI4A_VI1A: + case INPUT_SVIDEO_VI4A_VI1B: + case INPUT_SVIDEO_VI4A_VI1C: + case INPUT_SVIDEO_VI4A_VI3A: + case INPUT_SVIDEO_VI4A_VI3B: + case INPUT_SVIDEO_VI4A_VI3C: + lock_mask = STATUS_HORZ_SYNC_LOCK_BIT | + STATUS_VIRT_SYNC_LOCK_BIT; + break; + /* Need to add other interfaces*/ + default: + return -EINVAL; + } + + while (try_count-- > 0) { + /* Allow decoder to sync up with new input */ + msleep(LOCK_RETRY_DELAY); + + sync_lock_status = tvp514x_read_reg(sd, + REG_STATUS1); + if (lock_mask == (sync_lock_status & lock_mask)) + /* Input detected */ + break; + } + + if (try_count < 0) + return -EINVAL; + + decoder->input = input; + decoder->output = output; + + v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel); + + return 0; +} + +/** + * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl + * @ctrl: pointer to v4l2_ctrl structure + * + * If the requested control is supported, sets the control's current + * value in HW. Otherwise, returns -EINVAL if the control is not supported. + */ +static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct tvp514x_decoder *decoder = to_decoder(sd); + int err = -EINVAL, value; + + value = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value); + if (!err) + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; + break; + case V4L2_CID_CONTRAST: + err = tvp514x_write_reg(sd, REG_CONTRAST, value); + if (!err) + decoder->tvp514x_regs[REG_CONTRAST].val = value; + break; + case V4L2_CID_SATURATION: + err = tvp514x_write_reg(sd, REG_SATURATION, value); + if (!err) + decoder->tvp514x_regs[REG_SATURATION].val = value; + break; + case V4L2_CID_HUE: + if (value == 180) + value = 0x7F; + else if (value == -180) + value = 0x80; + err = tvp514x_write_reg(sd, REG_HUE, value); + if (!err) + decoder->tvp514x_regs[REG_HUE].val = value; + break; + case V4L2_CID_AUTOGAIN: + err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c); + if (!err) + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; + break; + } + + v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n", + ctrl->id, ctrl->val); + return err; +} + +/** + * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt + * @sd: pointer to standard V4L2 sub-device structure + * @index: index of pixelcode to retrieve + * @code: receives the pixelcode + * + * Enumerates supported mediabus formats + */ +static int +tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_YUYV10_2X10; + return 0; +} + +/** + * tvp514x_mbus_fmt_cap() - V4L2 decoder interface handler for try/s/g_mbus_fmt + * @sd: pointer to standard V4L2 sub-device structure + * @f: pointer to the mediabus format structure + * + * Negotiates the image capture size and mediabus format. + */ +static int +tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + enum tvp514x_std current_std; + + if (f == NULL) + return -EINVAL; + + /* Calculate height and width based on current standard */ + current_std = decoder->current_std; + + f->code = V4L2_MBUS_FMT_YUYV10_2X10; + f->width = decoder->std_list[current_std].width; + f->height = decoder->std_list[current_std].height; + f->field = V4L2_FIELD_INTERLACED; + f->colorspace = V4L2_COLORSPACE_SMPTE170M; + + v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n", + f->width, f->height); + return 0; +} + +/** + * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm + * @sd: pointer to standard V4L2 sub-device structure + * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure + * + * Returns the decoder's video CAPTURE parameters. + */ +static int +tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + struct v4l2_captureparm *cparm; + enum tvp514x_std current_std; + + if (a == NULL) + return -EINVAL; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + /* only capture is supported */ + return -EINVAL; + + /* get the current standard */ + current_std = decoder->current_std; + + cparm = &a->parm.capture; + cparm->capability = V4L2_CAP_TIMEPERFRAME; + cparm->timeperframe = + decoder->std_list[current_std].standard.frameperiod; + + return 0; +} + +/** + * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm + * @sd: pointer to standard V4L2 sub-device structure + * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure + * + * Configures the decoder to use the input parameters, if possible. If + * not possible, returns the appropriate error code. + */ +static int +tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) +{ + struct tvp514x_decoder *decoder = to_decoder(sd); + struct v4l2_fract *timeperframe; + enum tvp514x_std current_std; + + if (a == NULL) + return -EINVAL; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + /* only capture is supported */ + return -EINVAL; + + timeperframe = &a->parm.capture.timeperframe; + + /* get the current standard */ + current_std = decoder->current_std; + + *timeperframe = + decoder->std_list[current_std].standard.frameperiod; + + return 0; +} + +/** + * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream + * @sd: pointer to standard V4L2 sub-device structure + * @enable: streaming enable or disable + * + * Sets streaming to enable or disable, if possible. + */ +static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable) +{ + int err = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tvp514x_decoder *decoder = to_decoder(sd); + + if (decoder->streaming == enable) + return 0; + + switch (enable) { + case 0: + { + /* Power Down Sequence */ + err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01); + if (err) { + v4l2_err(sd, "Unable to turn off decoder\n"); + return err; + } + decoder->streaming = enable; + break; + } + case 1: + { + struct tvp514x_reg *int_seq = (struct tvp514x_reg *) + client->driver->id_table->driver_data; + + /* Power Up Sequence */ + err = tvp514x_write_regs(sd, int_seq); + if (err) { + v4l2_err(sd, "Unable to turn on decoder\n"); + return err; + } + /* Detect if not already detected */ + err = tvp514x_detect(sd, decoder); + if (err) { + v4l2_err(sd, "Unable to detect decoder\n"); + return err; + } + err = tvp514x_configure(sd, decoder); + if (err) { + v4l2_err(sd, "Unable to configure decoder\n"); + return err; + } + decoder->streaming = enable; + break; + } + default: + err = -ENODEV; + break; + } + + return err; +} + +static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = { + .s_ctrl = tvp514x_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tvp514x_core_ops = { + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = tvp514x_s_std, +}; + +static const struct v4l2_subdev_video_ops tvp514x_video_ops = { + .s_routing = tvp514x_s_routing, + .querystd = tvp514x_querystd, + .enum_mbus_fmt = tvp514x_enum_mbus_fmt, + .g_mbus_fmt = tvp514x_mbus_fmt, + .try_mbus_fmt = tvp514x_mbus_fmt, + .s_mbus_fmt = tvp514x_mbus_fmt, + .g_parm = tvp514x_g_parm, + .s_parm = tvp514x_s_parm, + .s_stream = tvp514x_s_stream, +}; + +static const struct v4l2_subdev_ops tvp514x_ops = { + .core = &tvp514x_core_ops, + .video = &tvp514x_video_ops, +}; + +static struct tvp514x_decoder tvp514x_dev = { + .streaming = 0, + .current_std = STD_NTSC_MJ, + .std_list = tvp514x_std_list, + .num_stds = ARRAY_SIZE(tvp514x_std_list), + +}; + +/** + * tvp514x_probe() - decoder driver i2c probe handler + * @client: i2c driver client device structure + * @id: i2c driver id table + * + * Register decoder as an i2c client device and V4L2 + * device. + */ +static int +tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct tvp514x_decoder *decoder; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + if (!client->dev.platform_data) { + v4l2_err(client, "No platform data!!\n"); + return -ENODEV; + } + + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + /* Initialize the tvp514x_decoder with default configuration */ + *decoder = tvp514x_dev; + /* Copy default register configuration */ + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, + sizeof(tvp514x_reg_list_default)); + + /* Copy board specific information here */ + decoder->pdata = client->dev.platform_data; + + /** + * Fetch platform specific data, and configure the + * tvp514x_reg_list[] accordingly. Since this is one + * time configuration, no need to preserve. + */ + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= + (decoder->pdata->clk_polarity << 1); + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= + ((decoder->pdata->hs_polarity << 2) | + (decoder->pdata->vs_polarity << 3)); + /* Set default standard to auto */ + decoder->tvp514x_regs[REG_VIDEO_STD].val = + VIDEO_STD_AUTO_SWITCH_BIT; + + /* Register with V4L2 layer as slave device */ + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &tvp514x_ops); + + v4l2_ctrl_handler_init(&decoder->hdl, 5); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_HUE, -180, 180, 180, 0); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + + v4l2_info(sd, "%s decoder driver registered !!\n", sd->name); + + return 0; + +} + +/** + * tvp514x_remove() - decoder driver i2c remove handler + * @client: i2c driver client device structure + * + * Unregister decoder as an i2c client device and V4L2 + * device. Complement of tvp514x_probe(). + */ +static int tvp514x_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tvp514x_decoder *decoder = to_decoder(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} +/* TVP5146 Init/Power on Sequence */ +static const struct tvp514x_reg tvp5146_init_reg_seq[] = { + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, + {TOK_WRITE, REG_OPERATION_MODE, 0x01}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, +}; + +/* TVP5147 Init/Power on Sequence */ +static const struct tvp514x_reg tvp5147_init_reg_seq[] = { + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, + {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0}, + {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, + {TOK_WRITE, REG_OPERATION_MODE, 0x01}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, +}; + +/* TVP5146M2/TVP5147M1 Init/Power on Sequence */ +static const struct tvp514x_reg tvp514xm_init_reg_seq[] = { + {TOK_WRITE, REG_OPERATION_MODE, 0x01}, + {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, +}; + +/** + * I2C Device Table - + * + * name - Name of the actual device/chip. + * driver_data - Driver data + */ +static const struct i2c_device_id tvp514x_id[] = { + {"tvp5146", (unsigned long)tvp5146_init_reg_seq}, + {"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq}, + {"tvp5147", (unsigned long)tvp5147_init_reg_seq}, + {"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, tvp514x_id); + +static struct i2c_driver tvp514x_driver = { + .driver = { + .owner = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + }, + .probe = tvp514x_probe, + .remove = tvp514x_remove, + .id_table = tvp514x_id, +}; + +module_i2c_driver(tvp514x_driver); diff --git a/drivers/media/i2c/tvp514x_regs.h b/drivers/media/i2c/tvp514x_regs.h new file mode 100644 index 000000000000..d23aa2fbb9b1 --- /dev/null +++ b/drivers/media/i2c/tvp514x_regs.h @@ -0,0 +1,287 @@ +/* + * drivers/media/i2c/tvp514x_regs.h + * + * Copyright (C) 2008 Texas Instruments Inc + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Contributors: + * Sivaraj R <sivaraj@ti.com> + * Brijesh R Jadav <brijesh.j@ti.com> + * Hardik Shah <hardik.shah@ti.com> + * Manjunath Hadli <mrh@ti.com> + * Karicheri Muralidharan <m-karicheri2@ti.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _TVP514X_REGS_H +#define _TVP514X_REGS_H + +/* + * TVP5146/47 registers + */ +#define REG_INPUT_SEL (0x00) +#define REG_AFE_GAIN_CTRL (0x01) +#define REG_VIDEO_STD (0x02) +#define REG_OPERATION_MODE (0x03) +#define REG_AUTOSWITCH_MASK (0x04) + +#define REG_COLOR_KILLER (0x05) +#define REG_LUMA_CONTROL1 (0x06) +#define REG_LUMA_CONTROL2 (0x07) +#define REG_LUMA_CONTROL3 (0x08) + +#define REG_BRIGHTNESS (0x09) +#define REG_CONTRAST (0x0A) +#define REG_SATURATION (0x0B) +#define REG_HUE (0x0C) + +#define REG_CHROMA_CONTROL1 (0x0D) +#define REG_CHROMA_CONTROL2 (0x0E) + +/* 0x0F Reserved */ + +#define REG_COMP_PR_SATURATION (0x10) +#define REG_COMP_Y_CONTRAST (0x11) +#define REG_COMP_PB_SATURATION (0x12) + +/* 0x13 Reserved */ + +#define REG_COMP_Y_BRIGHTNESS (0x14) + +/* 0x15 Reserved */ + +#define REG_AVID_START_PIXEL_LSB (0x16) +#define REG_AVID_START_PIXEL_MSB (0x17) +#define REG_AVID_STOP_PIXEL_LSB (0x18) +#define REG_AVID_STOP_PIXEL_MSB (0x19) + +#define REG_HSYNC_START_PIXEL_LSB (0x1A) +#define REG_HSYNC_START_PIXEL_MSB (0x1B) +#define REG_HSYNC_STOP_PIXEL_LSB (0x1C) +#define REG_HSYNC_STOP_PIXEL_MSB (0x1D) + +#define REG_VSYNC_START_LINE_LSB (0x1E) +#define REG_VSYNC_START_LINE_MSB (0x1F) +#define REG_VSYNC_STOP_LINE_LSB (0x20) +#define REG_VSYNC_STOP_LINE_MSB (0x21) + +#define REG_VBLK_START_LINE_LSB (0x22) +#define REG_VBLK_START_LINE_MSB (0x23) +#define REG_VBLK_STOP_LINE_LSB (0x24) +#define REG_VBLK_STOP_LINE_MSB (0x25) + +/* 0x26 - 0x27 Reserved */ + +#define REG_FAST_SWTICH_CONTROL (0x28) + +/* 0x29 Reserved */ + +#define REG_FAST_SWTICH_SCART_DELAY (0x2A) + +/* 0x2B Reserved */ + +#define REG_SCART_DELAY (0x2C) +#define REG_CTI_DELAY (0x2D) +#define REG_CTI_CONTROL (0x2E) + +/* 0x2F - 0x31 Reserved */ + +#define REG_SYNC_CONTROL (0x32) +#define REG_OUTPUT_FORMATTER1 (0x33) +#define REG_OUTPUT_FORMATTER2 (0x34) +#define REG_OUTPUT_FORMATTER3 (0x35) +#define REG_OUTPUT_FORMATTER4 (0x36) +#define REG_OUTPUT_FORMATTER5 (0x37) +#define REG_OUTPUT_FORMATTER6 (0x38) +#define REG_CLEAR_LOST_LOCK (0x39) + +#define REG_STATUS1 (0x3A) +#define REG_STATUS2 (0x3B) + +#define REG_AGC_GAIN_STATUS_LSB (0x3C) +#define REG_AGC_GAIN_STATUS_MSB (0x3D) + +/* 0x3E Reserved */ + +#define REG_VIDEO_STD_STATUS (0x3F) +#define REG_GPIO_INPUT1 (0x40) +#define REG_GPIO_INPUT2 (0x41) + +/* 0x42 - 0x45 Reserved */ + +#define REG_AFE_COARSE_GAIN_CH1 (0x46) +#define REG_AFE_COARSE_GAIN_CH2 (0x47) +#define REG_AFE_COARSE_GAIN_CH3 (0x48) +#define REG_AFE_COARSE_GAIN_CH4 (0x49) + +#define REG_AFE_FINE_GAIN_PB_B_LSB (0x4A) +#define REG_AFE_FINE_GAIN_PB_B_MSB (0x4B) +#define REG_AFE_FINE_GAIN_Y_G_CHROMA_LSB (0x4C) +#define REG_AFE_FINE_GAIN_Y_G_CHROMA_MSB (0x4D) +#define REG_AFE_FINE_GAIN_PR_R_LSB (0x4E) +#define REG_AFE_FINE_GAIN_PR_R_MSB (0x4F) +#define REG_AFE_FINE_GAIN_CVBS_LUMA_LSB (0x50) +#define REG_AFE_FINE_GAIN_CVBS_LUMA_MSB (0x51) + +/* 0x52 - 0x68 Reserved */ + +#define REG_FBIT_VBIT_CONTROL1 (0x69) + +/* 0x6A - 0x6B Reserved */ + +#define REG_BACKEND_AGC_CONTROL (0x6C) + +/* 0x6D - 0x6E Reserved */ + +#define REG_AGC_DECREMENT_SPEED_CONTROL (0x6F) +#define REG_ROM_VERSION (0x70) + +/* 0x71 - 0x73 Reserved */ + +#define REG_AGC_WHITE_PEAK_PROCESSING (0x74) +#define REG_FBIT_VBIT_CONTROL2 (0x75) +#define REG_VCR_TRICK_MODE_CONTROL (0x76) +#define REG_HORIZONTAL_SHAKE_INCREMENT (0x77) +#define REG_AGC_INCREMENT_SPEED (0x78) +#define REG_AGC_INCREMENT_DELAY (0x79) + +/* 0x7A - 0x7F Reserved */ + +#define REG_CHIP_ID_MSB (0x80) +#define REG_CHIP_ID_LSB (0x81) + +/* 0x82 Reserved */ + +#define REG_CPLL_SPEED_CONTROL (0x83) + +/* 0x84 - 0x96 Reserved */ + +#define REG_STATUS_REQUEST (0x97) + +/* 0x98 - 0x99 Reserved */ + +#define REG_VERTICAL_LINE_COUNT_LSB (0x9A) +#define REG_VERTICAL_LINE_COUNT_MSB (0x9B) + +/* 0x9C - 0x9D Reserved */ + +#define REG_AGC_DECREMENT_DELAY (0x9E) + +/* 0x9F - 0xB0 Reserved */ + +#define REG_VDP_TTX_FILTER_1_MASK1 (0xB1) +#define REG_VDP_TTX_FILTER_1_MASK2 (0xB2) +#define REG_VDP_TTX_FILTER_1_MASK3 (0xB3) +#define REG_VDP_TTX_FILTER_1_MASK4 (0xB4) +#define REG_VDP_TTX_FILTER_1_MASK5 (0xB5) +#define REG_VDP_TTX_FILTER_2_MASK1 (0xB6) +#define REG_VDP_TTX_FILTER_2_MASK2 (0xB7) +#define REG_VDP_TTX_FILTER_2_MASK3 (0xB8) +#define REG_VDP_TTX_FILTER_2_MASK4 (0xB9) +#define REG_VDP_TTX_FILTER_2_MASK5 (0xBA) +#define REG_VDP_TTX_FILTER_CONTROL (0xBB) +#define REG_VDP_FIFO_WORD_COUNT (0xBC) +#define REG_VDP_FIFO_INTERRUPT_THRLD (0xBD) + +/* 0xBE Reserved */ + +#define REG_VDP_FIFO_RESET (0xBF) +#define REG_VDP_FIFO_OUTPUT_CONTROL (0xC0) +#define REG_VDP_LINE_NUMBER_INTERRUPT (0xC1) +#define REG_VDP_PIXEL_ALIGNMENT_LSB (0xC2) +#define REG_VDP_PIXEL_ALIGNMENT_MSB (0xC3) + +/* 0xC4 - 0xD5 Reserved */ + +#define REG_VDP_LINE_START (0xD6) +#define REG_VDP_LINE_STOP (0xD7) +#define REG_VDP_GLOBAL_LINE_MODE (0xD8) +#define REG_VDP_FULL_FIELD_ENABLE (0xD9) +#define REG_VDP_FULL_FIELD_MODE (0xDA) + +/* 0xDB - 0xDF Reserved */ + +#define REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR (0xE0) +#define REG_VBUS_DATA_ACCESS_VBUS_ADDR_INCR (0xE1) +#define REG_FIFO_READ_DATA (0xE2) + +/* 0xE3 - 0xE7 Reserved */ + +#define REG_VBUS_ADDRESS_ACCESS1 (0xE8) +#define REG_VBUS_ADDRESS_ACCESS2 (0xE9) +#define REG_VBUS_ADDRESS_ACCESS3 (0xEA) + +/* 0xEB - 0xEF Reserved */ + +#define REG_INTERRUPT_RAW_STATUS0 (0xF0) +#define REG_INTERRUPT_RAW_STATUS1 (0xF1) +#define REG_INTERRUPT_STATUS0 (0xF2) +#define REG_INTERRUPT_STATUS1 (0xF3) +#define REG_INTERRUPT_MASK0 (0xF4) +#define REG_INTERRUPT_MASK1 (0xF5) +#define REG_INTERRUPT_CLEAR0 (0xF6) +#define REG_INTERRUPT_CLEAR1 (0xF7) + +/* 0xF8 - 0xFF Reserved */ + +/* + * Mask and bit definitions of TVP5146/47 registers + */ +/* The ID values we are looking for */ +#define TVP514X_CHIP_ID_MSB (0x51) +#define TVP5146_CHIP_ID_LSB (0x46) +#define TVP5147_CHIP_ID_LSB (0x47) + +#define VIDEO_STD_MASK (0x07) +#define VIDEO_STD_AUTO_SWITCH_BIT (0x00) +#define VIDEO_STD_NTSC_MJ_BIT (0x01) +#define VIDEO_STD_PAL_BDGHIN_BIT (0x02) +#define VIDEO_STD_PAL_M_BIT (0x03) +#define VIDEO_STD_PAL_COMBINATION_N_BIT (0x04) +#define VIDEO_STD_NTSC_4_43_BIT (0x05) +#define VIDEO_STD_SECAM_BIT (0x06) +#define VIDEO_STD_PAL_60_BIT (0x07) + +/* + * Status bit + */ +#define STATUS_TV_VCR_BIT (1<<0) +#define STATUS_HORZ_SYNC_LOCK_BIT (1<<1) +#define STATUS_VIRT_SYNC_LOCK_BIT (1<<2) +#define STATUS_CLR_SUBCAR_LOCK_BIT (1<<3) +#define STATUS_LOST_LOCK_DETECT_BIT (1<<4) +#define STATUS_FEILD_RATE_BIT (1<<5) +#define STATUS_LINE_ALTERNATING_BIT (1<<6) +#define STATUS_PEAK_WHITE_DETECT_BIT (1<<7) + +/* Tokens for register write */ +#define TOK_WRITE (0) /* token for write operation */ +#define TOK_TERM (1) /* terminating token */ +#define TOK_DELAY (2) /* delay token for reg list */ +#define TOK_SKIP (3) /* token to skip a register */ +/** + * struct tvp514x_reg - Structure for TVP5146/47 register initialization values + * @token - Token: TOK_WRITE, TOK_TERM etc.. + * @reg - Register offset + * @val - Register Value for TOK_WRITE or delay in ms for TOK_DELAY + */ +struct tvp514x_reg { + u8 token; + u8 reg; + u32 val; +}; + +#endif /* ifndef _TVP514X_REGS_H */ diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c new file mode 100644 index 000000000000..a751b6c146fd --- /dev/null +++ b/drivers/media/i2c/tvp5150.c @@ -0,0 +1,1274 @@ +/* + * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver + * + * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <media/v4l2-device.h> +#include <media/tvp5150.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +#include "tvp5150_reg.h" + +#define TVP5150_H_MAX 720 +#define TVP5150_V_MAX_525_60 480 +#define TVP5150_V_MAX_OTHERS 576 +#define TVP5150_MAX_CROP_LEFT 511 +#define TVP5150_MAX_CROP_TOP 127 +#define TVP5150_CROP_SHIFT 2 + +MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +struct tvp5150 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_rect rect; + + v4l2_std_id norm; /* Current set standard */ + u32 input; + u32 output; + int enable; +}; + +static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp5150, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp5150, hdl)->sd; +} + +static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[1]; + int rc; + + buffer[0] = addr; + + rc = i2c_master_send(c, buffer, 1); + if (rc < 0) { + v4l2_err(sd, "i2c i/o error: rc == %d (should be 1)\n", rc); + return rc; + } + + msleep(10); + + rc = i2c_master_recv(c, buffer, 1); + if (rc < 0) { + v4l2_err(sd, "i2c i/o error: rc == %d (should be 1)\n", rc); + return rc; + } + + v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]); + + return (buffer[0]); +} + +static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr, + unsigned char value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[2]; + int rc; + + buffer[0] = addr; + buffer[1] = value; + v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]); + if (2 != (rc = i2c_master_send(c, buffer, 2))) + v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc); +} + +static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init, + const u8 end, int max_line) +{ + int i = 0; + + while (init != (u8)(end + 1)) { + if ((i % max_line) == 0) { + if (i > 0) + printk("\n"); + printk("tvp5150: %s reg 0x%02x = ", s, init); + } + printk("%02x ", tvp5150_read(sd, init)); + + init++; + i++; + } + printk("\n"); +} + +static int tvp5150_log_status(struct v4l2_subdev *sd) +{ + printk("tvp5150: Video input source selection #1 = 0x%02x\n", + tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1)); + printk("tvp5150: Analog channel controls = 0x%02x\n", + tvp5150_read(sd, TVP5150_ANAL_CHL_CTL)); + printk("tvp5150: Operation mode controls = 0x%02x\n", + tvp5150_read(sd, TVP5150_OP_MODE_CTL)); + printk("tvp5150: Miscellaneous controls = 0x%02x\n", + tvp5150_read(sd, TVP5150_MISC_CTL)); + printk("tvp5150: Autoswitch mask= 0x%02x\n", + tvp5150_read(sd, TVP5150_AUTOSW_MSK)); + printk("tvp5150: Color killer threshold control = 0x%02x\n", + tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL)); + printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n", + tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1), + tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2), + tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3)); + printk("tvp5150: Brightness control = 0x%02x\n", + tvp5150_read(sd, TVP5150_BRIGHT_CTL)); + printk("tvp5150: Color saturation control = 0x%02x\n", + tvp5150_read(sd, TVP5150_SATURATION_CTL)); + printk("tvp5150: Hue control = 0x%02x\n", + tvp5150_read(sd, TVP5150_HUE_CTL)); + printk("tvp5150: Contrast control = 0x%02x\n", + tvp5150_read(sd, TVP5150_CONTRAST_CTL)); + printk("tvp5150: Outputs and data rates select = 0x%02x\n", + tvp5150_read(sd, TVP5150_DATA_RATE_SEL)); + printk("tvp5150: Configuration shared pins = 0x%02x\n", + tvp5150_read(sd, TVP5150_CONF_SHARED_PIN)); + printk("tvp5150: Active video cropping start = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB), + tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB)); + printk("tvp5150: Active video cropping stop = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB), + tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB)); + printk("tvp5150: Genlock/RTC = 0x%02x\n", + tvp5150_read(sd, TVP5150_GENLOCK)); + printk("tvp5150: Horizontal sync start = 0x%02x\n", + tvp5150_read(sd, TVP5150_HORIZ_SYNC_START)); + printk("tvp5150: Vertical blanking start = 0x%02x\n", + tvp5150_read(sd, TVP5150_VERT_BLANKING_START)); + printk("tvp5150: Vertical blanking stop = 0x%02x\n", + tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP)); + printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n", + tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1), + tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2)); + printk("tvp5150: Interrupt reset register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_RESET_REG_B)); + printk("tvp5150: Interrupt enable register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B)); + printk("tvp5150: Interrupt configuration register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B)); + printk("tvp5150: Video standard = 0x%02x\n", + tvp5150_read(sd, TVP5150_VIDEO_STD)); + printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n", + tvp5150_read(sd, TVP5150_CB_GAIN_FACT), + tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR)); + printk("tvp5150: Macrovision on counter = 0x%02x\n", + tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR)); + printk("tvp5150: Macrovision off counter = 0x%02x\n", + tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR)); + printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n", + (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4); + printk("tvp5150: Device ID = %02x%02x\n", + tvp5150_read(sd, TVP5150_MSB_DEV_ID), + tvp5150_read(sd, TVP5150_LSB_DEV_ID)); + printk("tvp5150: ROM version = (hex) %02x.%02x\n", + tvp5150_read(sd, TVP5150_ROM_MAJOR_VER), + tvp5150_read(sd, TVP5150_ROM_MINOR_VER)); + printk("tvp5150: Vertical line count = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB), + tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB)); + printk("tvp5150: Interrupt status register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_STATUS_REG_B)); + printk("tvp5150: Interrupt active register B = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B)); + printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n", + tvp5150_read(sd, TVP5150_STATUS_REG_1), + tvp5150_read(sd, TVP5150_STATUS_REG_2), + tvp5150_read(sd, TVP5150_STATUS_REG_3), + tvp5150_read(sd, TVP5150_STATUS_REG_4), + tvp5150_read(sd, TVP5150_STATUS_REG_5)); + + dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI, + TVP5150_TELETEXT_FIL1_END, 8); + dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI, + TVP5150_TELETEXT_FIL2_END, 8); + + printk("tvp5150: Teletext filter enable = 0x%02x\n", + tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA)); + printk("tvp5150: Interrupt status register A = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_STATUS_REG_A)); + printk("tvp5150: Interrupt enable register A = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A)); + printk("tvp5150: Interrupt configuration = 0x%02x\n", + tvp5150_read(sd, TVP5150_INT_CONF)); + printk("tvp5150: VDP status register = 0x%02x\n", + tvp5150_read(sd, TVP5150_VDP_STATUS_REG)); + printk("tvp5150: FIFO word count = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT)); + printk("tvp5150: FIFO interrupt threshold = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD)); + printk("tvp5150: FIFO reset = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_RESET)); + printk("tvp5150: Line number interrupt = 0x%02x\n", + tvp5150_read(sd, TVP5150_LINE_NUMBER_INT)); + printk("tvp5150: Pixel alignment register = 0x%02x%02x\n", + tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH), + tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW)); + printk("tvp5150: FIFO output control = 0x%02x\n", + tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL)); + printk("tvp5150: Full field enable = 0x%02x\n", + tvp5150_read(sd, TVP5150_FULL_FIELD_ENA)); + printk("tvp5150: Full field mode register = 0x%02x\n", + tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG)); + + dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI, + TVP5150_CC_DATA_END, 8); + + dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI, + TVP5150_WSS_DATA_END, 8); + + dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI, + TVP5150_VPS_DATA_END, 8); + + dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI, + TVP5150_VITC_DATA_END, 10); + + dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI, + TVP5150_LINE_MODE_END, 8); + return 0; +} + +/**************************************************************************** + Basic functions + ****************************************************************************/ + +static inline void tvp5150_selmux(struct v4l2_subdev *sd) +{ + int opmode = 0; + struct tvp5150 *decoder = to_tvp5150(sd); + int input = 0; + int val; + + if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable) + input = 8; + + switch (decoder->input) { + case TVP5150_COMPOSITE1: + input |= 2; + /* fall through */ + case TVP5150_COMPOSITE0: + break; + case TVP5150_SVIDEO: + default: + input |= 1; + break; + } + + v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i " + "=> tvp5150 input=%i, opmode=%i\n", + decoder->input, decoder->output, + input, opmode); + + tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode); + tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input); + + /* Svideo should enable YCrCb output and disable GPCL output + * For Composite and TV, it should be the reverse + */ + val = tvp5150_read(sd, TVP5150_MISC_CTL); + if (val < 0) { + v4l2_err(sd, "%s: failed with error = %d\n", __func__, val); + return; + } + + if (decoder->input == TVP5150_SVIDEO) + val = (val & ~0x40) | 0x10; + else + val = (val & ~0x10) | 0x40; + tvp5150_write(sd, TVP5150_MISC_CTL, val); +}; + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +/* Default values as sugested at TVP5150AM1 datasheet */ +static const struct i2c_reg_value tvp5150_init_default[] = { + { /* 0x00 */ + TVP5150_VD_IN_SRC_SEL_1,0x00 + }, + { /* 0x01 */ + TVP5150_ANAL_CHL_CTL,0x15 + }, + { /* 0x02 */ + TVP5150_OP_MODE_CTL,0x00 + }, + { /* 0x03 */ + TVP5150_MISC_CTL,0x01 + }, + { /* 0x06 */ + TVP5150_COLOR_KIL_THSH_CTL,0x10 + }, + { /* 0x07 */ + TVP5150_LUMA_PROC_CTL_1,0x60 + }, + { /* 0x08 */ + TVP5150_LUMA_PROC_CTL_2,0x00 + }, + { /* 0x09 */ + TVP5150_BRIGHT_CTL,0x80 + }, + { /* 0x0a */ + TVP5150_SATURATION_CTL,0x80 + }, + { /* 0x0b */ + TVP5150_HUE_CTL,0x00 + }, + { /* 0x0c */ + TVP5150_CONTRAST_CTL,0x80 + }, + { /* 0x0d */ + TVP5150_DATA_RATE_SEL,0x47 + }, + { /* 0x0e */ + TVP5150_LUMA_PROC_CTL_3,0x00 + }, + { /* 0x0f */ + TVP5150_CONF_SHARED_PIN,0x08 + }, + { /* 0x11 */ + TVP5150_ACT_VD_CROP_ST_MSB,0x00 + }, + { /* 0x12 */ + TVP5150_ACT_VD_CROP_ST_LSB,0x00 + }, + { /* 0x13 */ + TVP5150_ACT_VD_CROP_STP_MSB,0x00 + }, + { /* 0x14 */ + TVP5150_ACT_VD_CROP_STP_LSB,0x00 + }, + { /* 0x15 */ + TVP5150_GENLOCK,0x01 + }, + { /* 0x16 */ + TVP5150_HORIZ_SYNC_START,0x80 + }, + { /* 0x18 */ + TVP5150_VERT_BLANKING_START,0x00 + }, + { /* 0x19 */ + TVP5150_VERT_BLANKING_STOP,0x00 + }, + { /* 0x1a */ + TVP5150_CHROMA_PROC_CTL_1,0x0c + }, + { /* 0x1b */ + TVP5150_CHROMA_PROC_CTL_2,0x14 + }, + { /* 0x1c */ + TVP5150_INT_RESET_REG_B,0x00 + }, + { /* 0x1d */ + TVP5150_INT_ENABLE_REG_B,0x00 + }, + { /* 0x1e */ + TVP5150_INTT_CONFIG_REG_B,0x00 + }, + { /* 0x28 */ + TVP5150_VIDEO_STD,0x00 + }, + { /* 0x2e */ + TVP5150_MACROVISION_ON_CTR,0x0f + }, + { /* 0x2f */ + TVP5150_MACROVISION_OFF_CTR,0x01 + }, + { /* 0xbb */ + TVP5150_TELETEXT_FIL_ENA,0x00 + }, + { /* 0xc0 */ + TVP5150_INT_STATUS_REG_A,0x00 + }, + { /* 0xc1 */ + TVP5150_INT_ENABLE_REG_A,0x00 + }, + { /* 0xc2 */ + TVP5150_INT_CONF,0x04 + }, + { /* 0xc8 */ + TVP5150_FIFO_INT_THRESHOLD,0x80 + }, + { /* 0xc9 */ + TVP5150_FIFO_RESET,0x00 + }, + { /* 0xca */ + TVP5150_LINE_NUMBER_INT,0x00 + }, + { /* 0xcb */ + TVP5150_PIX_ALIGN_REG_LOW,0x4e + }, + { /* 0xcc */ + TVP5150_PIX_ALIGN_REG_HIGH,0x00 + }, + { /* 0xcd */ + TVP5150_FIFO_OUT_CTRL,0x01 + }, + { /* 0xcf */ + TVP5150_FULL_FIELD_ENA,0x00 + }, + { /* 0xd0 */ + TVP5150_LINE_MODE_INI,0x00 + }, + { /* 0xfc */ + TVP5150_FULL_FIELD_MODE_REG,0x7f + }, + { /* end of data */ + 0xff,0xff + } +}; + +/* Default values as sugested at TVP5150AM1 datasheet */ +static const struct i2c_reg_value tvp5150_init_enable[] = { + { + TVP5150_CONF_SHARED_PIN, 2 + },{ /* Automatic offset and AGC enabled */ + TVP5150_ANAL_CHL_CTL, 0x15 + },{ /* Activate YCrCb output 0x9 or 0xd ? */ + TVP5150_MISC_CTL, 0x6f + },{ /* Activates video std autodetection for all standards */ + TVP5150_AUTOSW_MSK, 0x0 + },{ /* Default format: 0x47. For 4:2:2: 0x40 */ + TVP5150_DATA_RATE_SEL, 0x47 + },{ + TVP5150_CHROMA_PROC_CTL_1, 0x0c + },{ + TVP5150_CHROMA_PROC_CTL_2, 0x54 + },{ /* Non documented, but initialized on WinTV USB2 */ + 0x27, 0x20 + },{ + 0xff,0xff + } +}; + +struct tvp5150_vbi_type { + unsigned int vbi_type; + unsigned int ini_line; + unsigned int end_line; + unsigned int by_field :1; +}; + +struct i2c_vbi_ram_value { + u16 reg; + struct tvp5150_vbi_type type; + unsigned char values[16]; +}; + +/* This struct have the values for each supported VBI Standard + * by + tvp5150_vbi_types should follow the same order as vbi_ram_default + * value 0 means rom position 0x10, value 1 means rom position 0x30 + * and so on. There are 16 possible locations from 0 to 15. + */ + +static struct i2c_vbi_ram_value vbi_ram_default[] = +{ + /* FIXME: Current api doesn't handle all VBI types, those not + yet supported are placed under #if 0 */ +#if 0 + {0x010, /* Teletext, SECAM, WST System A */ + {V4L2_SLICED_TELETEXT_SECAM,6,23,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26, + 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, +#endif + {0x030, /* Teletext, PAL, WST System B */ + {V4L2_SLICED_TELETEXT_B,6,22,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b, + 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, +#if 0 + {0x050, /* Teletext, PAL, WST System C */ + {V4L2_SLICED_TELETEXT_PAL_C,6,22,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, + 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, + {0x070, /* Teletext, NTSC, WST System B */ + {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, + {0x090, /* Tetetext, NTSC NABTS System C */ + {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 } + }, + {0x0b0, /* Teletext, NTSC-J, NABTS System D */ + {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } + }, + {0x0d0, /* Closed Caption, PAL/SECAM */ + {V4L2_SLICED_CAPTION_625,22,22,1}, + { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, + 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } + }, +#endif + {0x0f0, /* Closed Caption, NTSC */ + {V4L2_SLICED_CAPTION_525,21,21,1}, + { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, + 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } + }, + {0x110, /* Wide Screen Signal, PAL/SECAM */ + {V4L2_SLICED_WSS_625,23,23,1}, + { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42, + 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 } + }, +#if 0 + {0x130, /* Wide Screen Signal, NTSC C */ + {V4L2_SLICED_WSS_525,20,20,1}, + { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43, + 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 } + }, + {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */ + {V4l2_SLICED_VITC_625,6,22,0}, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, + 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } + }, + {0x170, /* Vertical Interval Timecode (VITC), NTSC */ + {V4l2_SLICED_VITC_525,10,20,0}, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, + 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } + }, +#endif + {0x190, /* Video Program System (VPS), PAL */ + {V4L2_SLICED_VPS,16,16,0}, + { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d, + 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 } + }, + /* 0x1d0 User programmable */ + + /* End of struct */ + { (u16)-1 } +}; + +static int tvp5150_write_inittab(struct v4l2_subdev *sd, + const struct i2c_reg_value *regs) +{ + while (regs->reg != 0xff) { + tvp5150_write(sd, regs->reg, regs->value); + regs++; + } + return 0; +} + +static int tvp5150_vdp_init(struct v4l2_subdev *sd, + const struct i2c_vbi_ram_value *regs) +{ + unsigned int i; + + /* Disable Full Field */ + tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0); + + /* Before programming, Line mode should be at 0xff */ + for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) + tvp5150_write(sd, i, 0xff); + + /* Load Ram Table */ + while (regs->reg != (u16)-1) { + tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8); + tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg); + + for (i = 0; i < 16; i++) + tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]); + + regs++; + } + return 0; +} + +/* Fills VBI capabilities based on i2c_vbi_ram_value struct */ +static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd, + struct v4l2_sliced_vbi_cap *cap) +{ + const struct i2c_vbi_ram_value *regs = vbi_ram_default; + int line; + + v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n"); + memset(cap, 0, sizeof *cap); + + while (regs->reg != (u16)-1 ) { + for (line=regs->type.ini_line;line<=regs->type.end_line;line++) { + cap->service_lines[0][line] |= regs->type.vbi_type; + } + cap->service_set |= regs->type.vbi_type; + + regs++; + } + return 0; +} + +/* Set vbi processing + * type - one of tvp5150_vbi_types + * line - line to gather data + * fields: bit 0 field1, bit 1, field2 + * flags (default=0xf0) is a bitmask, were set means: + * bit 7: enable filtering null bytes on CC + * bit 6: send data also to FIFO + * bit 5: don't allow data with errors on FIFO + * bit 4: enable ECC when possible + * pix_align = pix alignment: + * LSB = field1 + * MSB = field2 + */ +static int tvp5150_set_vbi(struct v4l2_subdev *sd, + const struct i2c_vbi_ram_value *regs, + unsigned int type,u8 flags, int line, + const int fields) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std = decoder->norm; + u8 reg; + int pos=0; + + if (std == V4L2_STD_ALL) { + v4l2_err(sd, "VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std & V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line<6||line>27) + return 0; + + while (regs->reg != (u16)-1 ) { + if ((type & regs->type.vbi_type) && + (line>=regs->type.ini_line) && + (line<=regs->type.end_line)) { + type=regs->type.vbi_type; + break; + } + + regs++; + pos++; + } + if (regs->reg == (u16)-1) + return 0; + + type=pos | (flags & 0xf0); + reg=((line-6)<<1)+TVP5150_LINE_MODE_INI; + + if (fields&1) { + tvp5150_write(sd, reg, type); + } + + if (fields&2) { + tvp5150_write(sd, reg+1, type); + } + + return type; +} + +static int tvp5150_get_vbi(struct v4l2_subdev *sd, + const struct i2c_vbi_ram_value *regs, int line) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std = decoder->norm; + u8 reg; + int pos, type = 0; + int i, ret = 0; + + if (std == V4L2_STD_ALL) { + v4l2_err(sd, "VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std & V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line < 6 || line > 27) + return 0; + + reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI; + + for (i = 0; i <= 1; i++) { + ret = tvp5150_read(sd, reg + i); + if (ret < 0) { + v4l2_err(sd, "%s: failed with error = %d\n", + __func__, ret); + return 0; + } + pos = ret & 0x0f; + if (pos < 0x0f) + type |= regs[pos].type.vbi_type; + } + + return type; +} + +static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + int fmt = 0; + + decoder->norm = std; + + /* First tests should be against specific std */ + + if (std == V4L2_STD_ALL) { + fmt = VIDEO_STD_AUTO_SWITCH_BIT; /* Autodetect mode */ + } else if (std & V4L2_STD_NTSC_443) { + fmt = VIDEO_STD_NTSC_4_43_BIT; + } else if (std & V4L2_STD_PAL_M) { + fmt = VIDEO_STD_PAL_M_BIT; + } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) { + fmt = VIDEO_STD_PAL_COMBINATION_N_BIT; + } else { + /* Then, test against generic ones */ + if (std & V4L2_STD_NTSC) + fmt = VIDEO_STD_NTSC_MJ_BIT; + else if (std & V4L2_STD_PAL) + fmt = VIDEO_STD_PAL_BDGHIN_BIT; + else if (std & V4L2_STD_SECAM) + fmt = VIDEO_STD_SECAM_BIT; + } + + v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt); + tvp5150_write(sd, TVP5150_VIDEO_STD, fmt); + return 0; +} + +static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + if (decoder->norm == std) + return 0; + + /* Change cropping height limits */ + if (std & V4L2_STD_525_60) + decoder->rect.height = TVP5150_V_MAX_525_60; + else + decoder->rect.height = TVP5150_V_MAX_OTHERS; + + + return tvp5150_set_std(sd, std); +} + +static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + /* Initializes TVP5150 to its default values */ + tvp5150_write_inittab(sd, tvp5150_init_default); + + /* Initializes VDP registers */ + tvp5150_vdp_init(sd, vbi_ram_default); + + /* Selects decoder input */ + tvp5150_selmux(sd); + + /* Initializes TVP5150 to stream enabled values */ + tvp5150_write_inittab(sd, tvp5150_init_enable); + + /* Initialize image preferences */ + v4l2_ctrl_handler_setup(&decoder->hdl); + + tvp5150_set_std(sd, decoder->norm); + return 0; +}; + +static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val); + return 0; + case V4L2_CID_CONTRAST: + tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val); + return 0; + case V4L2_CID_SATURATION: + tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val); + return 0; + case V4L2_CID_HUE: + tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val); + return 0; + } + return -EINVAL; +} + +static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd) +{ + int val = tvp5150_read(sd, TVP5150_STATUS_REG_5); + + switch (val & 0x0F) { + case 0x01: + return V4L2_STD_NTSC; + case 0x03: + return V4L2_STD_PAL; + case 0x05: + return V4L2_STD_PAL_M; + case 0x07: + return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc; + case 0x09: + return V4L2_STD_NTSC_443; + case 0xb: + return V4L2_STD_SECAM; + default: + return V4L2_STD_UNKNOWN; + } +} + +static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index) + return -EINVAL; + + *code = V4L2_MBUS_FMT_UYVY8_2X8; + return 0; +} + +static int tvp5150_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *f) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + if (f == NULL) + return -EINVAL; + + tvp5150_reset(sd, 0); + + f->width = decoder->rect.width; + f->height = decoder->rect.height; + + f->code = V4L2_MBUS_FMT_UYVY8_2X8; + f->field = V4L2_FIELD_SEQ_TB; + f->colorspace = V4L2_COLORSPACE_SMPTE170M; + + v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width, + f->height); + return 0; +} + +static int tvp5150_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct v4l2_rect rect = a->c; + struct tvp5150 *decoder = to_tvp5150(sd); + v4l2_std_id std; + int hmax; + + v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n", + __func__, rect.left, rect.top, rect.width, rect.height); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + /* tvp5150 has some special limits */ + rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT); + rect.width = clamp(rect.width, + TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left, + TVP5150_H_MAX - rect.left); + rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP); + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + hmax = TVP5150_V_MAX_525_60; + else + hmax = TVP5150_V_MAX_OTHERS; + + rect.height = clamp(rect.height, + hmax - TVP5150_MAX_CROP_TOP - rect.top, + hmax - rect.top); + + tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top); + tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, + rect.top + rect.height - hmax); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB, + rect.left >> TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB, + rect.left | (1 << TVP5150_CROP_SHIFT)); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB, + (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >> + TVP5150_CROP_SHIFT); + tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB, + rect.left + rect.width - TVP5150_MAX_CROP_LEFT); + + decoder->rect = rect; + + return 0; +} + +static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + + a->c = decoder->rect; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd); + v4l2_std_id std; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = TVP5150_H_MAX; + + /* Calculate height based on current standard */ + if (decoder->norm == V4L2_STD_ALL) + std = tvp5150_read_std(sd); + else + std = decoder->norm; + + if (std & V4L2_STD_525_60) + a->bounds.height = TVP5150_V_MAX_525_60; + else + a->bounds.height = TVP5150_V_MAX_OTHERS; + + a->defrect = a->bounds; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +/**************************************************************************** + I2C Command + ****************************************************************************/ + +static int tvp5150_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct tvp5150 *decoder = to_tvp5150(sd); + + decoder->input = input; + decoder->output = output; + tvp5150_selmux(sd); + return 0; +} + +static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) +{ + /* this is for capturing 36 raw vbi lines + if there's a way to cut off the beginning 2 vbi lines + with the tvp5150 then the vbi line count could be lowered + to 17 lines/field again, although I couldn't find a register + which could do that cropping */ + if (fmt->sample_format == V4L2_PIX_FMT_GREY) + tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70); + if (fmt->count[0] == 18 && fmt->count[1] == 18) { + tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00); + tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01); + } + return 0; +} + +static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + int i; + + if (svbi->service_set != 0) { + for (i = 0; i <= 23; i++) { + svbi->service_lines[1][i] = 0; + svbi->service_lines[0][i] = + tvp5150_set_vbi(sd, vbi_ram_default, + svbi->service_lines[0][i], 0xf0, i, 3); + } + /* Enables FIFO */ + tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1); + } else { + /* Disables FIFO*/ + tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0); + + /* Disable Full Field */ + tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0); + + /* Disable Line modes */ + for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++) + tvp5150_write(sd, i, 0xff); + } + return 0; +} + +static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi) +{ + int i, mask = 0; + + memset(svbi, 0, sizeof(*svbi)); + + for (i = 0; i <= 23; i++) { + svbi->service_lines[0][i] = + tvp5150_get_vbi(sd, vbi_ram_default, i); + mask |= svbi->service_lines[0][i]; + } + svbi->service_set = mask; + return 0; +} + +static int tvp5150_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 | + tvp5150_read(sd, TVP5150_ROM_MINOR_VER); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150, + rev); +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + int res; + + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + res = tvp5150_read(sd, reg->reg & 0xff); + if (res < 0) { + v4l2_err(sd, "%s: failed with error = %d\n", __func__, res); + return res; + } + + reg->val = res; + reg->size = 1; + return 0; +} + +static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + int status = tvp5150_read(sd, 0x88); + + vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0; + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { + .s_ctrl = tvp5150_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tvp5150_core_ops = { + .log_status = tvp5150_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = tvp5150_s_std, + .reset = tvp5150_reset, + .g_chip_ident = tvp5150_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = tvp5150_g_register, + .s_register = tvp5150_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = { + .g_tuner = tvp5150_g_tuner, +}; + +static const struct v4l2_subdev_video_ops tvp5150_video_ops = { + .s_routing = tvp5150_s_routing, + .enum_mbus_fmt = tvp5150_enum_mbus_fmt, + .s_mbus_fmt = tvp5150_mbus_fmt, + .try_mbus_fmt = tvp5150_mbus_fmt, + .g_mbus_fmt = tvp5150_mbus_fmt, + .s_crop = tvp5150_s_crop, + .g_crop = tvp5150_g_crop, + .cropcap = tvp5150_cropcap, +}; + +static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { + .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap, + .g_sliced_fmt = tvp5150_g_sliced_fmt, + .s_sliced_fmt = tvp5150_s_sliced_fmt, + .s_raw_fmt = tvp5150_s_raw_fmt, +}; + +static const struct v4l2_subdev_ops tvp5150_ops = { + .core = &tvp5150_core_ops, + .tuner = &tvp5150_tuner_ops, + .video = &tvp5150_video_ops, + .vbi = &tvp5150_vbi_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int tvp5150_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + struct tvp5150 *core; + struct v4l2_subdev *sd; + int tvp5150_id[4]; + int i, res; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL); + if (!core) { + return -ENOMEM; + } + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &tvp5150_ops); + + /* + * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID, + * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER + */ + for (i = 0; i < 4; i++) { + res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i); + if (res < 0) + goto free_core; + tvp5150_id[i] = res; + } + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */ + v4l2_info(sd, "tvp%02x%02xam1 detected.\n", + tvp5150_id[0], tvp5150_id[1]); + + /* ITU-T BT.656.4 timing */ + tvp5150_write(sd, TVP5150_REV_SELECT, 0); + } else { + /* Is TVP5150A */ + if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) { + v4l2_info(sd, "tvp%02x%02xa detected.\n", + tvp5150_id[2], tvp5150_id[3]); + } else { + v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n", + tvp5150_id[2], tvp5150_id[3]); + v4l2_info(sd, "*** Rom ver is %d.%d\n", + tvp5150_id[2], tvp5150_id[3]); + } + } + + core->norm = V4L2_STD_ALL; /* Default is autodetect */ + core->input = TVP5150_COMPOSITE1; + core->enable = 1; + + v4l2_ctrl_handler_init(&core->hdl, 4); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &core->hdl; + if (core->hdl.error) { + res = core->hdl.error; + v4l2_ctrl_handler_free(&core->hdl); + goto free_core; + } + v4l2_ctrl_handler_setup(&core->hdl); + + /* Default is no cropping */ + core->rect.top = 0; + if (tvp5150_read_std(sd) & V4L2_STD_525_60) + core->rect.height = TVP5150_V_MAX_525_60; + else + core->rect.height = TVP5150_V_MAX_OTHERS; + core->rect.left = 0; + core->rect.width = TVP5150_H_MAX; + + if (debug > 1) + tvp5150_log_status(sd); + return 0; + +free_core: + kfree(core); + return res; +} + +static int tvp5150_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct tvp5150 *decoder = to_tvp5150(sd); + + v4l2_dbg(1, debug, sd, + "tvp5150.c: removing tvp5150 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(to_tvp5150(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id tvp5150_id[] = { + { "tvp5150", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tvp5150_id); + +static struct i2c_driver tvp5150_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "tvp5150", + }, + .probe = tvp5150_probe, + .remove = tvp5150_remove, + .id_table = tvp5150_id, +}; + +module_i2c_driver(tvp5150_driver); diff --git a/drivers/media/i2c/tvp5150_reg.h b/drivers/media/i2c/tvp5150_reg.h new file mode 100644 index 000000000000..25a994944918 --- /dev/null +++ b/drivers/media/i2c/tvp5150_reg.h @@ -0,0 +1,139 @@ +/* + * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder registers + * + * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#define TVP5150_VD_IN_SRC_SEL_1 0x00 /* Video input source selection #1 */ +#define TVP5150_ANAL_CHL_CTL 0x01 /* Analog channel controls */ +#define TVP5150_OP_MODE_CTL 0x02 /* Operation mode controls */ +#define TVP5150_MISC_CTL 0x03 /* Miscellaneous controls */ +#define TVP5150_AUTOSW_MSK 0x04 /* Autoswitch mask: TVP5150A / TVP5150AM */ + +/* Reserved 05h */ + +#define TVP5150_COLOR_KIL_THSH_CTL 0x06 /* Color killer threshold control */ +#define TVP5150_LUMA_PROC_CTL_1 0x07 /* Luminance processing control #1 */ +#define TVP5150_LUMA_PROC_CTL_2 0x08 /* Luminance processing control #2 */ +#define TVP5150_BRIGHT_CTL 0x09 /* Brightness control */ +#define TVP5150_SATURATION_CTL 0x0a /* Color saturation control */ +#define TVP5150_HUE_CTL 0x0b /* Hue control */ +#define TVP5150_CONTRAST_CTL 0x0c /* Contrast control */ +#define TVP5150_DATA_RATE_SEL 0x0d /* Outputs and data rates select */ +#define TVP5150_LUMA_PROC_CTL_3 0x0e /* Luminance processing control #3 */ +#define TVP5150_CONF_SHARED_PIN 0x0f /* Configuration shared pins */ + +/* Reserved 10h */ + +#define TVP5150_ACT_VD_CROP_ST_MSB 0x11 /* Active video cropping start MSB */ +#define TVP5150_ACT_VD_CROP_ST_LSB 0x12 /* Active video cropping start LSB */ +#define TVP5150_ACT_VD_CROP_STP_MSB 0x13 /* Active video cropping stop MSB */ +#define TVP5150_ACT_VD_CROP_STP_LSB 0x14 /* Active video cropping stop LSB */ +#define TVP5150_GENLOCK 0x15 /* Genlock/RTC */ +#define TVP5150_HORIZ_SYNC_START 0x16 /* Horizontal sync start */ + +/* Reserved 17h */ + +#define TVP5150_VERT_BLANKING_START 0x18 /* Vertical blanking start */ +#define TVP5150_VERT_BLANKING_STOP 0x19 /* Vertical blanking stop */ +#define TVP5150_CHROMA_PROC_CTL_1 0x1a /* Chrominance processing control #1 */ +#define TVP5150_CHROMA_PROC_CTL_2 0x1b /* Chrominance processing control #2 */ +#define TVP5150_INT_RESET_REG_B 0x1c /* Interrupt reset register B */ +#define TVP5150_INT_ENABLE_REG_B 0x1d /* Interrupt enable register B */ +#define TVP5150_INTT_CONFIG_REG_B 0x1e /* Interrupt configuration register B */ + +/* Reserved 1Fh-27h */ + +#define VIDEO_STD_MASK (0x07 >> 1) +#define TVP5150_VIDEO_STD 0x28 /* Video standard */ +#define VIDEO_STD_AUTO_SWITCH_BIT 0x00 +#define VIDEO_STD_NTSC_MJ_BIT 0x02 +#define VIDEO_STD_PAL_BDGHIN_BIT 0x04 +#define VIDEO_STD_PAL_M_BIT 0x06 +#define VIDEO_STD_PAL_COMBINATION_N_BIT 0x08 +#define VIDEO_STD_NTSC_4_43_BIT 0x0a +#define VIDEO_STD_SECAM_BIT 0x0c + +#define VIDEO_STD_NTSC_MJ_BIT_AS 0x01 +#define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03 +#define VIDEO_STD_PAL_M_BIT_AS 0x05 +#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07 +#define VIDEO_STD_NTSC_4_43_BIT_AS 0x09 +#define VIDEO_STD_SECAM_BIT_AS 0x0b + +/* Reserved 29h-2bh */ + +#define TVP5150_CB_GAIN_FACT 0x2c /* Cb gain factor */ +#define TVP5150_CR_GAIN_FACTOR 0x2d /* Cr gain factor */ +#define TVP5150_MACROVISION_ON_CTR 0x2e /* Macrovision on counter */ +#define TVP5150_MACROVISION_OFF_CTR 0x2f /* Macrovision off counter */ +#define TVP5150_REV_SELECT 0x30 /* revision select (TVP5150AM1 only) */ + +/* Reserved 31h-7Fh */ + +#define TVP5150_MSB_DEV_ID 0x80 /* MSB of device ID */ +#define TVP5150_LSB_DEV_ID 0x81 /* LSB of device ID */ +#define TVP5150_ROM_MAJOR_VER 0x82 /* ROM major version */ +#define TVP5150_ROM_MINOR_VER 0x83 /* ROM minor version */ +#define TVP5150_VERT_LN_COUNT_MSB 0x84 /* Vertical line count MSB */ +#define TVP5150_VERT_LN_COUNT_LSB 0x85 /* Vertical line count LSB */ +#define TVP5150_INT_STATUS_REG_B 0x86 /* Interrupt status register B */ +#define TVP5150_INT_ACTIVE_REG_B 0x87 /* Interrupt active register B */ +#define TVP5150_STATUS_REG_1 0x88 /* Status register #1 */ +#define TVP5150_STATUS_REG_2 0x89 /* Status register #2 */ +#define TVP5150_STATUS_REG_3 0x8a /* Status register #3 */ +#define TVP5150_STATUS_REG_4 0x8b /* Status register #4 */ +#define TVP5150_STATUS_REG_5 0x8c /* Status register #5 */ +/* Reserved 8Dh-8Fh */ + /* Closed caption data registers */ +#define TVP5150_CC_DATA_INI 0x90 +#define TVP5150_CC_DATA_END 0x93 + + /* WSS data registers */ +#define TVP5150_WSS_DATA_INI 0x94 +#define TVP5150_WSS_DATA_END 0x99 + +/* VPS data registers */ +#define TVP5150_VPS_DATA_INI 0x9a +#define TVP5150_VPS_DATA_END 0xa6 + +/* VITC data registers */ +#define TVP5150_VITC_DATA_INI 0xa7 +#define TVP5150_VITC_DATA_END 0xaf + +#define TVP5150_VBI_FIFO_READ_DATA 0xb0 /* VBI FIFO read data */ + +/* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL1_INI 0xb1 +#define TVP5150_TELETEXT_FIL1_END 0xb5 + +/* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL2_INI 0xb6 +#define TVP5150_TELETEXT_FIL2_END 0xba + +#define TVP5150_TELETEXT_FIL_ENA 0xbb /* Teletext filter enable */ +/* Reserved BCh-BFh */ +#define TVP5150_INT_STATUS_REG_A 0xc0 /* Interrupt status register A */ +#define TVP5150_INT_ENABLE_REG_A 0xc1 /* Interrupt enable register A */ +#define TVP5150_INT_CONF 0xc2 /* Interrupt configuration */ +#define TVP5150_VDP_CONF_RAM_DATA 0xc3 /* VDP configuration RAM data */ +#define TVP5150_CONF_RAM_ADDR_LOW 0xc4 /* Configuration RAM address low byte */ +#define TVP5150_CONF_RAM_ADDR_HIGH 0xc5 /* Configuration RAM address high byte */ +#define TVP5150_VDP_STATUS_REG 0xc6 /* VDP status register */ +#define TVP5150_FIFO_WORD_COUNT 0xc7 /* FIFO word count */ +#define TVP5150_FIFO_INT_THRESHOLD 0xc8 /* FIFO interrupt threshold */ +#define TVP5150_FIFO_RESET 0xc9 /* FIFO reset */ +#define TVP5150_LINE_NUMBER_INT 0xca /* Line number interrupt */ +#define TVP5150_PIX_ALIGN_REG_LOW 0xcb /* Pixel alignment register low byte */ +#define TVP5150_PIX_ALIGN_REG_HIGH 0xcc /* Pixel alignment register high byte */ +#define TVP5150_FIFO_OUT_CTRL 0xcd /* FIFO output control */ +/* Reserved CEh */ +#define TVP5150_FULL_FIELD_ENA 0xcf /* Full field enable 1 */ + +/* Line mode registers */ +#define TVP5150_LINE_MODE_INI 0xd0 +#define TVP5150_LINE_MODE_END 0xfb + +#define TVP5150_FULL_FIELD_MODE_REG 0xfc /* Full field mode register */ +/* Reserved FDh-FFh */ diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c new file mode 100644 index 000000000000..fb6a5b57eb83 --- /dev/null +++ b/drivers/media/i2c/tvp7002.c @@ -0,0 +1,1145 @@ +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics + * Digitizer with Horizontal PLL registers + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> + * + * This code is partially based upon the TVP5150 driver + * written by Mauro Carvalho Chehab (mchehab@infradead.org), + * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com> + * and the TVP7002 driver in the TI LSP 2.10.00.14. Revisions by + * Muralidharan Karicheri and Snehaprabha Narnakaje (TI). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/module.h> +#include <linux/v4l2-dv-timings.h> +#include <media/tvp7002.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> +#include "tvp7002_reg.h" + +MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver"); +MODULE_AUTHOR("Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>"); +MODULE_LICENSE("GPL"); + +/* Module Name */ +#define TVP7002_MODULE_NAME "tvp7002" + +/* I2C retry attempts */ +#define I2C_RETRY_COUNT (5) + +/* End of registers */ +#define TVP7002_EOR 0x5c + +/* Read write definition for registers */ +#define TVP7002_READ 0 +#define TVP7002_WRITE 1 +#define TVP7002_RESERVED 2 + +/* Interlaced vs progressive mask and shift */ +#define TVP7002_IP_SHIFT 5 +#define TVP7002_INPR_MASK (0x01 << TVP7002_IP_SHIFT) + +/* Shift for CPL and LPF registers */ +#define TVP7002_CL_SHIFT 8 +#define TVP7002_CL_MASK 0x0f + +/* Debug functions */ +static bool debug; +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* Structure for register values */ +struct i2c_reg_value { + u8 reg; + u8 value; + u8 type; +}; + +/* + * Register default values (according to tvp7002 datasheet) + * In the case of read-only registers, the value (0xff) is + * never written. R/W functionality is controlled by the + * writable bit in the register struct definition. + */ +static const struct i2c_reg_value tvp7002_init_default[] = { + { TVP7002_CHIP_REV, 0xff, TVP7002_READ }, + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE }, + { TVP7002_HPLL_PHASE_SEL, 0x80, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HSYNC_OUT_W, 0x60, TVP7002_WRITE }, + { TVP7002_B_FINE_GAIN, 0x00, TVP7002_WRITE }, + { TVP7002_G_FINE_GAIN, 0x00, TVP7002_WRITE }, + { TVP7002_R_FINE_GAIN, 0x00, TVP7002_WRITE }, + { TVP7002_B_FINE_OFF_MSBS, 0x80, TVP7002_WRITE }, + { TVP7002_G_FINE_OFF_MSBS, 0x80, TVP7002_WRITE }, + { TVP7002_R_FINE_OFF_MSBS, 0x80, TVP7002_WRITE }, + { TVP7002_SYNC_CTL_1, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_AND_CLAMP_CTL, 0x2e, TVP7002_WRITE }, + { TVP7002_SYNC_ON_G_THRS, 0x5d, TVP7002_WRITE }, + { TVP7002_SYNC_SEPARATOR_THRS, 0x47, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_SYNC_DETECT_STAT, 0xff, TVP7002_READ }, + { TVP7002_OUT_FORMATTER, 0x47, TVP7002_WRITE }, + { TVP7002_MISC_CTL_1, 0x01, TVP7002_WRITE }, + { TVP7002_MISC_CTL_2, 0x00, TVP7002_WRITE }, + { TVP7002_MISC_CTL_3, 0x01, TVP7002_WRITE }, + { TVP7002_IN_MUX_SEL_1, 0x00, TVP7002_WRITE }, + { TVP7002_IN_MUX_SEL_2, 0x67, TVP7002_WRITE }, + { TVP7002_B_AND_G_COARSE_GAIN, 0x77, TVP7002_WRITE }, + { TVP7002_R_COARSE_GAIN, 0x07, TVP7002_WRITE }, + { TVP7002_FINE_OFF_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_B_COARSE_OFF, 0x10, TVP7002_WRITE }, + { TVP7002_G_COARSE_OFF, 0x10, TVP7002_WRITE }, + { TVP7002_R_COARSE_OFF, 0x10, TVP7002_WRITE }, + { TVP7002_HSOUT_OUT_START, 0x08, TVP7002_WRITE }, + { TVP7002_MISC_CTL_4, 0x00, TVP7002_WRITE }, + { TVP7002_B_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_G_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_R_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_AUTO_LVL_CTL_ENABLE, 0x80, TVP7002_WRITE }, + { TVP7002_DGTL_ALC_OUT_MSBS, 0xff, TVP7002_READ }, + { TVP7002_AUTO_LVL_CTL_FILTER, 0x53, TVP7002_WRITE }, + { 0x29, 0x08, TVP7002_RESERVED }, + { TVP7002_FINE_CLAMP_CTL, 0x07, TVP7002_WRITE }, + /* PWR_CTL is controlled only by the probe and reset functions */ + { TVP7002_PWR_CTL, 0x00, TVP7002_RESERVED }, + { TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE }, + { TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE }, + { TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE }, + { TVP7002_RGB_COARSE_CLAMP_CTL, 0x8c, TVP7002_WRITE }, + { TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { 0x32, 0x18, TVP7002_RESERVED }, + { 0x33, 0x60, TVP7002_RESERVED }, + { TVP7002_MVIS_STRIPPER_W, 0xff, TVP7002_RESERVED }, + { TVP7002_VSYNC_ALGN, 0x10, TVP7002_WRITE }, + { TVP7002_SYNC_BYPASS, 0x00, TVP7002_WRITE }, + { TVP7002_L_FRAME_STAT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_L_FRAME_STAT_MSBS, 0xff, TVP7002_READ }, + { TVP7002_CLK_L_STAT_LSBS, 0xff, TVP7002_READ }, + { TVP7002_CLK_L_STAT_MSBS, 0xff, TVP7002_READ }, + { TVP7002_HSYNC_W, 0xff, TVP7002_READ }, + { TVP7002_VSYNC_W, 0xff, TVP7002_READ }, + { TVP7002_L_LENGTH_TOL, 0x03, TVP7002_WRITE }, + { 0x3e, 0x60, TVP7002_RESERVED }, + { TVP7002_VIDEO_BWTH_CTL, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x2c, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x2c, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x1e, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_FBIT_F_0_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_FBIT_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_YUV_Y_G_COEF_LSBS, 0xe3, TVP7002_WRITE }, + { TVP7002_YUV_Y_G_COEF_MSBS, 0x16, TVP7002_WRITE }, + { TVP7002_YUV_Y_B_COEF_LSBS, 0x4f, TVP7002_WRITE }, + { TVP7002_YUV_Y_B_COEF_MSBS, 0x02, TVP7002_WRITE }, + { TVP7002_YUV_Y_R_COEF_LSBS, 0xce, TVP7002_WRITE }, + { TVP7002_YUV_Y_R_COEF_MSBS, 0x06, TVP7002_WRITE }, + { TVP7002_YUV_U_G_COEF_LSBS, 0xab, TVP7002_WRITE }, + { TVP7002_YUV_U_G_COEF_MSBS, 0xf3, TVP7002_WRITE }, + { TVP7002_YUV_U_B_COEF_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_YUV_U_B_COEF_MSBS, 0x10, TVP7002_WRITE }, + { TVP7002_YUV_U_R_COEF_LSBS, 0x55, TVP7002_WRITE }, + { TVP7002_YUV_U_R_COEF_MSBS, 0xfc, TVP7002_WRITE }, + { TVP7002_YUV_V_G_COEF_LSBS, 0x78, TVP7002_WRITE }, + { TVP7002_YUV_V_G_COEF_MSBS, 0xf1, TVP7002_WRITE }, + { TVP7002_YUV_V_B_COEF_LSBS, 0x88, TVP7002_WRITE }, + { TVP7002_YUV_V_B_COEF_MSBS, 0xfe, TVP7002_WRITE }, + { TVP7002_YUV_V_R_COEF_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_YUV_V_R_COEF_MSBS, 0x10, TVP7002_WRITE }, + /* This signals end of register values */ + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 480P */ +static const struct i2c_reg_value tvp7002_parms_480P[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x03, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x01, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x13, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x13, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 576P */ +static const struct i2c_reg_value tvp7002_parms_576P[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x06, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x10, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 1080I60 */ +static const struct i2c_reg_value tvp7002_parms_1080I60[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 1080P60 */ +static const struct i2c_reg_value tvp7002_parms_1080P60[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 1080I50 */ +static const struct i2c_reg_value tvp7002_parms_1080I50[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 720P60 */ +static const struct i2c_reg_value tvp7002_parms_720P60[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Register parameters for 720P50 */ +static const struct i2c_reg_value tvp7002_parms_720P50[] = { + { TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE }, + { TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE }, + { TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE }, + { TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE }, + { TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE }, + { TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE }, + { TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE }, + { TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE }, + { TVP7002_CLAMP_START, 0x32, TVP7002_WRITE }, + { TVP7002_CLAMP_W, 0x20, TVP7002_WRITE }, + { TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE }, + { TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE }, + { TVP7002_EOR, 0xff, TVP7002_RESERVED } +}; + +/* Preset definition for handling device operation */ +struct tvp7002_preset_definition { + u32 preset; + struct v4l2_dv_timings timings; + const struct i2c_reg_value *p_settings; + enum v4l2_colorspace color_space; + enum v4l2_field scanmode; + u16 progressive; + u16 lines_per_frame; + u16 cpl_min; + u16 cpl_max; +}; + +/* Struct list for digital video presets */ +static const struct tvp7002_preset_definition tvp7002_presets[] = { + { + V4L2_DV_720P60, + V4L2_DV_BT_CEA_1280X720P60, + tvp7002_parms_720P60, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_NONE, + 1, + 0x2EE, + 135, + 153 + }, + { + V4L2_DV_1080I60, + V4L2_DV_BT_CEA_1920X1080I60, + tvp7002_parms_1080I60, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_INTERLACED, + 0, + 0x465, + 181, + 205 + }, + { + V4L2_DV_1080I50, + V4L2_DV_BT_CEA_1920X1080I50, + tvp7002_parms_1080I50, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_INTERLACED, + 0, + 0x465, + 217, + 245 + }, + { + V4L2_DV_720P50, + V4L2_DV_BT_CEA_1280X720P50, + tvp7002_parms_720P50, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_NONE, + 1, + 0x2EE, + 163, + 183 + }, + { + V4L2_DV_1080P60, + V4L2_DV_BT_CEA_1920X1080P60, + tvp7002_parms_1080P60, + V4L2_COLORSPACE_REC709, + V4L2_FIELD_NONE, + 1, + 0x465, + 90, + 102 + }, + { + V4L2_DV_480P59_94, + V4L2_DV_BT_CEA_720X480P59_94, + tvp7002_parms_480P, + V4L2_COLORSPACE_SMPTE170M, + V4L2_FIELD_NONE, + 1, + 0x20D, + 0xffff, + 0xffff + }, + { + V4L2_DV_576P50, + V4L2_DV_BT_CEA_720X576P50, + tvp7002_parms_576P, + V4L2_COLORSPACE_SMPTE170M, + V4L2_FIELD_NONE, + 1, + 0x271, + 0xffff, + 0xffff + } +}; + +#define NUM_PRESETS ARRAY_SIZE(tvp7002_presets) + +/* Device definition */ +struct tvp7002 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + const struct tvp7002_config *pdata; + + int ver; + int streaming; + + const struct tvp7002_preset_definition *current_preset; +}; + +/* + * to_tvp7002 - Obtain device handler TVP7002 + * @sd: ptr to v4l2_subdev struct + * + * Returns device handler tvp7002. + */ +static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp7002, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp7002, hdl)->sd; +} + +/* + * tvp7002_read - Read a value from a register in an TVP7002 + * @sd: ptr to v4l2_subdev struct + * @addr: TVP7002 register address + * @dst: pointer to 8-bit destination + * + * Returns value read if successful, or non-zero (-1) otherwise. + */ +static int tvp7002_read(struct v4l2_subdev *sd, u8 addr, u8 *dst) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + int retry; + int error; + + for (retry = 0; retry < I2C_RETRY_COUNT; retry++) { + error = i2c_smbus_read_byte_data(c, addr); + + if (error >= 0) { + *dst = (u8)error; + return 0; + } + + msleep_interruptible(10); + } + v4l2_err(sd, "TVP7002 read error %d\n", error); + return error; +} + +/* + * tvp7002_read_err() - Read a register value with error code + * @sd: pointer to standard V4L2 sub-device structure + * @reg: destination register + * @val: value to be read + * @err: pointer to error value + * + * Read a value in a register and save error value in pointer. + * Also update the register table if successful + */ +static inline void tvp7002_read_err(struct v4l2_subdev *sd, u8 reg, + u8 *dst, int *err) +{ + if (!*err) + *err = tvp7002_read(sd, reg, dst); +} + +/* + * tvp7002_write() - Write a value to a register in TVP7002 + * @sd: ptr to v4l2_subdev struct + * @addr: TVP7002 register address + * @value: value to be written to the register + * + * Write a value to a register in an TVP7002 decoder device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tvp7002_write(struct v4l2_subdev *sd, u8 addr, u8 value) +{ + struct i2c_client *c; + int retry; + int error; + + c = v4l2_get_subdevdata(sd); + + for (retry = 0; retry < I2C_RETRY_COUNT; retry++) { + error = i2c_smbus_write_byte_data(c, addr, value); + + if (error >= 0) + return 0; + + v4l2_warn(sd, "Write: retry ... %d\n", retry); + msleep_interruptible(10); + } + v4l2_err(sd, "TVP7002 write error %d\n", error); + return error; +} + +/* + * tvp7002_write_err() - Write a register value with error code + * @sd: pointer to standard V4L2 sub-device structure + * @reg: destination register + * @val: value to be written + * @err: pointer to error value + * + * Write a value in a register and save error value in pointer. + * Also update the register table if successful + */ +static inline void tvp7002_write_err(struct v4l2_subdev *sd, u8 reg, + u8 val, int *err) +{ + if (!*err) + *err = tvp7002_write(sd, reg, val); +} + +/* + * tvp7002_g_chip_ident() - Get chip identification number + * @sd: ptr to v4l2_subdev struct + * @chip: ptr to v4l2_dbg_chip_ident struct + * + * Obtains the chip's identification number. + * Returns zero or -EINVAL if read operation fails. + */ +static int tvp7002_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + u8 rev; + int error; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + error = tvp7002_read(sd, TVP7002_CHIP_REV, &rev); + + if (error < 0) + return error; + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP7002, rev); +} + +/* + * tvp7002_write_inittab() - Write initialization values + * @sd: ptr to v4l2_subdev struct + * @regs: ptr to i2c_reg_value struct + * + * Write initialization values. + * Returns zero or -EINVAL if read operation fails. + */ +static int tvp7002_write_inittab(struct v4l2_subdev *sd, + const struct i2c_reg_value *regs) +{ + int error = 0; + + /* Initialize the first (defined) registers */ + while (TVP7002_EOR != regs->reg) { + if (TVP7002_WRITE == regs->type) + tvp7002_write_err(sd, regs->reg, regs->value, &error); + regs++; + } + + return error; +} + +/* + * tvp7002_s_dv_preset() - Set digital video preset + * @sd: ptr to v4l2_subdev struct + * @dv_preset: ptr to v4l2_dv_preset struct + * + * Set the digital video preset for a TVP7002 decoder device. + * Returns zero when successful or -EINVAL if register access fails. + */ +static int tvp7002_s_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *dv_preset) +{ + struct tvp7002 *device = to_tvp7002(sd); + u32 preset; + int i; + + for (i = 0; i < NUM_PRESETS; i++) { + preset = tvp7002_presets[i].preset; + if (preset == dv_preset->preset) { + device->current_preset = &tvp7002_presets[i]; + return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings); + } + } + + return -EINVAL; +} + +static int tvp7002_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *dv_timings) +{ + struct tvp7002 *device = to_tvp7002(sd); + const struct v4l2_bt_timings *bt = &dv_timings->bt; + int i; + + if (dv_timings->type != V4L2_DV_BT_656_1120) + return -EINVAL; + for (i = 0; i < NUM_PRESETS; i++) { + const struct v4l2_bt_timings *t = &tvp7002_presets[i].timings.bt; + + if (!memcmp(bt, t, &bt->standards - &bt->width)) { + device->current_preset = &tvp7002_presets[i]; + return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings); + } + } + return -EINVAL; +} + +static int tvp7002_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *dv_timings) +{ + struct tvp7002 *device = to_tvp7002(sd); + + *dv_timings = device->current_preset->timings; + return 0; +} + +/* + * tvp7002_s_ctrl() - Set a control + * @ctrl: ptr to v4l2_ctrl struct + * + * Set a control in TVP7002 decoder device. + * Returns zero when successful or -EINVAL if register access fails. + */ +static int tvp7002_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + int error = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + tvp7002_write_err(sd, TVP7002_R_FINE_GAIN, ctrl->val, &error); + tvp7002_write_err(sd, TVP7002_G_FINE_GAIN, ctrl->val, &error); + tvp7002_write_err(sd, TVP7002_B_FINE_GAIN, ctrl->val, &error); + return error; + } + return -EINVAL; +} + +/* + * tvp7002_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt + * @sd: pointer to standard V4L2 sub-device structure + * @f: pointer to mediabus format structure + * + * Negotiate the image capture size and mediabus format. + * There is only one possible format, so this single function works for + * get, set and try. + */ +static int tvp7002_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f) +{ + struct tvp7002 *device = to_tvp7002(sd); + struct v4l2_dv_enum_preset e_preset; + int error; + + /* Calculate height and width based on current standard */ + error = v4l_fill_dv_preset_info(device->current_preset->preset, &e_preset); + if (error) + return error; + + f->width = e_preset.width; + f->height = e_preset.height; + f->code = V4L2_MBUS_FMT_YUYV10_1X20; + f->field = device->current_preset->scanmode; + f->colorspace = device->current_preset->color_space; + + v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d", + f->width, f->height); + return 0; +} + +/* + * tvp7002_query_dv_preset() - query DV preset + * @sd: pointer to standard V4L2 sub-device structure + * @qpreset: standard V4L2 v4l2_dv_preset structure + * + * Returns the current DV preset by TVP7002. If no active input is + * detected, returns -EINVAL + */ +static int tvp7002_query_dv(struct v4l2_subdev *sd, int *index) +{ + const struct tvp7002_preset_definition *presets = tvp7002_presets; + u8 progressive; + u32 lpfr; + u32 cpln; + int error = 0; + u8 lpf_lsb; + u8 lpf_msb; + u8 cpl_lsb; + u8 cpl_msb; + + /* Return invalid index if no active input is detected */ + *index = NUM_PRESETS; + + /* Read standards from device registers */ + tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_LSBS, &lpf_lsb, &error); + tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_MSBS, &lpf_msb, &error); + + if (error < 0) + return error; + + tvp7002_read_err(sd, TVP7002_CLK_L_STAT_LSBS, &cpl_lsb, &error); + tvp7002_read_err(sd, TVP7002_CLK_L_STAT_MSBS, &cpl_msb, &error); + + if (error < 0) + return error; + + /* Get lines per frame, clocks per line and interlaced/progresive */ + lpfr = lpf_lsb | ((TVP7002_CL_MASK & lpf_msb) << TVP7002_CL_SHIFT); + cpln = cpl_lsb | ((TVP7002_CL_MASK & cpl_msb) << TVP7002_CL_SHIFT); + progressive = (lpf_msb & TVP7002_INPR_MASK) >> TVP7002_IP_SHIFT; + + /* Do checking of video modes */ + for (*index = 0; *index < NUM_PRESETS; (*index)++, presets++) + if (lpfr == presets->lines_per_frame && + progressive == presets->progressive) { + if (presets->cpl_min == 0xffff) + break; + if (cpln >= presets->cpl_min && cpln <= presets->cpl_max) + break; + } + + if (*index == NUM_PRESETS) { + v4l2_dbg(1, debug, sd, "detection failed: lpf = %x, cpl = %x\n", + lpfr, cpln); + return -ENOLINK; + } + + /* Update lines per frame and clocks per line info */ + v4l2_dbg(1, debug, sd, "detected preset: %d\n", *index); + return 0; +} + +static int tvp7002_query_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *qpreset) +{ + int index; + int err = tvp7002_query_dv(sd, &index); + + if (err || index == NUM_PRESETS) { + qpreset->preset = V4L2_DV_INVALID; + if (err == -ENOLINK) + err = 0; + return err; + } + qpreset->preset = tvp7002_presets[index].preset; + return 0; +} + +static int tvp7002_query_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + int index; + int err = tvp7002_query_dv(sd, &index); + + if (err) + return err; + *timings = tvp7002_presets[index].timings; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * tvp7002_g_register() - Get the value of a register + * @sd: ptr to v4l2_subdev struct + * @reg: ptr to v4l2_dbg_register struct + * + * Get the value of a TVP7002 decoder device register. + * Returns zero when successful, -EINVAL if register read fails or + * access to I2C client fails, -EPERM if the call is not allowed + * by disabled CAP_SYS_ADMIN. + */ +static int tvp7002_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 val; + int ret; + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + ret = tvp7002_read(sd, reg->reg & 0xff, &val); + reg->val = val; + return ret; +} + +/* + * tvp7002_s_register() - set a control + * @sd: ptr to v4l2_subdev struct + * @reg: ptr to v4l2_dbg_register struct + * + * Get the value of a TVP7002 decoder device register. + * Returns zero when successful, -EINVAL if register read fails or + * -EPERM if call not allowed. + */ +static int tvp7002_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return tvp7002_write(sd, reg->reg & 0xff, reg->val & 0xff); +} +#endif + +/* + * tvp7002_enum_mbus_fmt() - Enum supported mediabus formats + * @sd: pointer to standard V4L2 sub-device structure + * @index: format index + * @code: pointer to mediabus format + * + * Enumerate supported mediabus formats. + */ + +static int tvp7002_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + /* Check requested format index is within range */ + if (index) + return -EINVAL; + *code = V4L2_MBUS_FMT_YUYV10_1X20; + return 0; +} + +/* + * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream + * @sd: pointer to standard V4L2 sub-device structure + * @enable: streaming enable or disable + * + * Sets streaming to enable or disable, if possible. + */ +static int tvp7002_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct tvp7002 *device = to_tvp7002(sd); + int error = 0; + + if (device->streaming == enable) + return 0; + + if (enable) { + /* Set output state on (low impedance means stream on) */ + error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x00); + device->streaming = enable; + } else { + /* Set output state off (high impedance means stream off) */ + error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x03); + if (error) + v4l2_dbg(1, debug, sd, "Unable to stop streaming\n"); + + device->streaming = enable; + } + + return error; +} + +/* + * tvp7002_log_status() - Print information about register settings + * @sd: ptr to v4l2_subdev struct + * + * Log register values of a TVP7002 decoder device. + * Returns zero or -EINVAL if read operation fails. + */ +static int tvp7002_log_status(struct v4l2_subdev *sd) +{ + const struct tvp7002_preset_definition *presets = tvp7002_presets; + struct tvp7002 *device = to_tvp7002(sd); + struct v4l2_dv_enum_preset e_preset; + struct v4l2_dv_preset detected; + int i; + + detected.preset = V4L2_DV_INVALID; + /* Find my current standard*/ + tvp7002_query_dv_preset(sd, &detected); + + /* Print standard related code values */ + for (i = 0; i < NUM_PRESETS; i++, presets++) + if (presets->preset == detected.preset) + break; + + if (v4l_fill_dv_preset_info(device->current_preset->preset, &e_preset)) + return -EINVAL; + + v4l2_info(sd, "Selected DV Preset: %s\n", e_preset.name); + v4l2_info(sd, " Pixels per line: %u\n", e_preset.width); + v4l2_info(sd, " Lines per frame: %u\n\n", e_preset.height); + if (i == NUM_PRESETS) { + v4l2_info(sd, "Detected DV Preset: None\n"); + } else { + if (v4l_fill_dv_preset_info(presets->preset, &e_preset)) + return -EINVAL; + v4l2_info(sd, "Detected DV Preset: %s\n", e_preset.name); + v4l2_info(sd, " Pixels per line: %u\n", e_preset.width); + v4l2_info(sd, " Lines per frame: %u\n\n", e_preset.height); + } + v4l2_info(sd, "Streaming enabled: %s\n", + device->streaming ? "yes" : "no"); + + /* Print the current value of the gain control */ + v4l2_ctrl_handler_log_status(&device->hdl, sd->name); + + return 0; +} + +/* + * tvp7002_enum_dv_presets() - Enum supported digital video formats + * @sd: pointer to standard V4L2 sub-device structure + * @preset: pointer to format struct + * + * Enumerate supported digital video formats. + */ +static int tvp7002_enum_dv_presets(struct v4l2_subdev *sd, + struct v4l2_dv_enum_preset *preset) +{ + /* Check requested format index is within range */ + if (preset->index >= NUM_PRESETS) + return -EINVAL; + + return v4l_fill_dv_preset_info(tvp7002_presets[preset->index].preset, preset); +} + +static int tvp7002_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + /* Check requested format index is within range */ + if (timings->index >= NUM_PRESETS) + return -EINVAL; + + timings->timings = tvp7002_presets[timings->index].timings; + return 0; +} + +static const struct v4l2_ctrl_ops tvp7002_ctrl_ops = { + .s_ctrl = tvp7002_s_ctrl, +}; + +/* V4L2 core operation handlers */ +static const struct v4l2_subdev_core_ops tvp7002_core_ops = { + .g_chip_ident = tvp7002_g_chip_ident, + .log_status = tvp7002_log_status, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = tvp7002_g_register, + .s_register = tvp7002_s_register, +#endif +}; + +/* Specific video subsystem operation handlers */ +static const struct v4l2_subdev_video_ops tvp7002_video_ops = { + .enum_dv_presets = tvp7002_enum_dv_presets, + .s_dv_preset = tvp7002_s_dv_preset, + .query_dv_preset = tvp7002_query_dv_preset, + .g_dv_timings = tvp7002_g_dv_timings, + .s_dv_timings = tvp7002_s_dv_timings, + .enum_dv_timings = tvp7002_enum_dv_timings, + .query_dv_timings = tvp7002_query_dv_timings, + .s_stream = tvp7002_s_stream, + .g_mbus_fmt = tvp7002_mbus_fmt, + .try_mbus_fmt = tvp7002_mbus_fmt, + .s_mbus_fmt = tvp7002_mbus_fmt, + .enum_mbus_fmt = tvp7002_enum_mbus_fmt, +}; + +/* V4L2 top level operation handlers */ +static const struct v4l2_subdev_ops tvp7002_ops = { + .core = &tvp7002_core_ops, + .video = &tvp7002_video_ops, +}; + +/* + * tvp7002_probe - Probe a TVP7002 device + * @c: ptr to i2c_client struct + * @id: ptr to i2c_device_id struct + * + * Initialize the TVP7002 device + * Returns zero when successful, -EINVAL if register read fails or + * -EIO if i2c access is not available. + */ +static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) +{ + struct v4l2_subdev *sd; + struct tvp7002 *device; + struct v4l2_dv_preset preset; + int polarity_a; + int polarity_b; + u8 revision; + + int error; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + if (!c->dev.platform_data) { + v4l_err(c, "No platform data!!\n"); + return -ENODEV; + } + + device = kzalloc(sizeof(struct tvp7002), GFP_KERNEL); + + if (!device) + return -ENOMEM; + + sd = &device->sd; + device->pdata = c->dev.platform_data; + device->current_preset = tvp7002_presets; + + /* Tell v4l2 the device is ready */ + v4l2_i2c_subdev_init(sd, c, &tvp7002_ops); + v4l_info(c, "tvp7002 found @ 0x%02x (%s)\n", + c->addr, c->adapter->name); + + error = tvp7002_read(sd, TVP7002_CHIP_REV, &revision); + if (error < 0) + goto found_error; + + /* Get revision number */ + v4l2_info(sd, "Rev. %02x detected.\n", revision); + if (revision != 0x02) + v4l2_info(sd, "Unknown revision detected.\n"); + + /* Initializes TVP7002 to its default values */ + error = tvp7002_write_inittab(sd, tvp7002_init_default); + + if (error < 0) + goto found_error; + + /* Set polarity information after registers have been set */ + polarity_a = 0x20 | device->pdata->hs_polarity << 5 + | device->pdata->vs_polarity << 2; + error = tvp7002_write(sd, TVP7002_SYNC_CTL_1, polarity_a); + if (error < 0) + goto found_error; + + polarity_b = 0x01 | device->pdata->fid_polarity << 2 + | device->pdata->sog_polarity << 1 + | device->pdata->clk_polarity; + error = tvp7002_write(sd, TVP7002_MISC_CTL_3, polarity_b); + if (error < 0) + goto found_error; + + /* Set registers according to default video mode */ + preset.preset = device->current_preset->preset; + error = tvp7002_s_dv_preset(sd, &preset); + + v4l2_ctrl_handler_init(&device->hdl, 1); + v4l2_ctrl_new_std(&device->hdl, &tvp7002_ctrl_ops, + V4L2_CID_GAIN, 0, 255, 1, 0); + sd->ctrl_handler = &device->hdl; + if (device->hdl.error) { + int err = device->hdl.error; + + v4l2_ctrl_handler_free(&device->hdl); + kfree(device); + return err; + } + v4l2_ctrl_handler_setup(&device->hdl); + +found_error: + if (error < 0) + kfree(device); + + return error; +} + +/* + * tvp7002_remove - Remove TVP7002 device support + * @c: ptr to i2c_client struct + * + * Reset the TVP7002 device + * Returns zero. + */ +static int tvp7002_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct tvp7002 *device = to_tvp7002(sd); + + v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter" + "on address 0x%x\n", c->addr); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&device->hdl); + kfree(device); + return 0; +} + +/* I2C Device ID table */ +static const struct i2c_device_id tvp7002_id[] = { + { "tvp7002", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tvp7002_id); + +/* I2C driver data */ +static struct i2c_driver tvp7002_driver = { + .driver = { + .owner = THIS_MODULE, + .name = TVP7002_MODULE_NAME, + }, + .probe = tvp7002_probe, + .remove = tvp7002_remove, + .id_table = tvp7002_id, +}; + +module_i2c_driver(tvp7002_driver); diff --git a/drivers/media/i2c/tvp7002_reg.h b/drivers/media/i2c/tvp7002_reg.h new file mode 100644 index 000000000000..0e34ca9bccf3 --- /dev/null +++ b/drivers/media/i2c/tvp7002_reg.h @@ -0,0 +1,150 @@ +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics + * Digitizer with Horizontal PLL registers + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> + * + * This code is partially based upon the TVP5150 driver + * written by Mauro Carvalho Chehab (mchehab@infradead.org), + * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com> + * and the TVP7002 driver in the TI LSP 2.10.00.14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Naming conventions + * ------------------ + * + * FDBK: Feedback + * DIV: Divider + * CTL: Control + * SEL: Select + * IN: Input + * OUT: Output + * R: Red + * G: Green + * B: Blue + * OFF: Offset + * THRS: Threshold + * DGTL: Digital + * LVL: Level + * PWR: Power + * MVIS: Macrovision + * W: Width + * H: Height + * ALGN: Alignment + * CLK: Clocks + * TOL: Tolerance + * BWTH: Bandwidth + * COEF: Coefficient + * STAT: Status + * AUTO: Automatic + * FLD: Field + * L: Line + */ + +#define TVP7002_CHIP_REV 0x00 +#define TVP7002_HPLL_FDBK_DIV_MSBS 0x01 +#define TVP7002_HPLL_FDBK_DIV_LSBS 0x02 +#define TVP7002_HPLL_CRTL 0x03 +#define TVP7002_HPLL_PHASE_SEL 0x04 +#define TVP7002_CLAMP_START 0x05 +#define TVP7002_CLAMP_W 0x06 +#define TVP7002_HSYNC_OUT_W 0x07 +#define TVP7002_B_FINE_GAIN 0x08 +#define TVP7002_G_FINE_GAIN 0x09 +#define TVP7002_R_FINE_GAIN 0x0a +#define TVP7002_B_FINE_OFF_MSBS 0x0b +#define TVP7002_G_FINE_OFF_MSBS 0x0c +#define TVP7002_R_FINE_OFF_MSBS 0x0d +#define TVP7002_SYNC_CTL_1 0x0e +#define TVP7002_HPLL_AND_CLAMP_CTL 0x0f +#define TVP7002_SYNC_ON_G_THRS 0x10 +#define TVP7002_SYNC_SEPARATOR_THRS 0x11 +#define TVP7002_HPLL_PRE_COAST 0x12 +#define TVP7002_HPLL_POST_COAST 0x13 +#define TVP7002_SYNC_DETECT_STAT 0x14 +#define TVP7002_OUT_FORMATTER 0x15 +#define TVP7002_MISC_CTL_1 0x16 +#define TVP7002_MISC_CTL_2 0x17 +#define TVP7002_MISC_CTL_3 0x18 +#define TVP7002_IN_MUX_SEL_1 0x19 +#define TVP7002_IN_MUX_SEL_2 0x1a +#define TVP7002_B_AND_G_COARSE_GAIN 0x1b +#define TVP7002_R_COARSE_GAIN 0x1c +#define TVP7002_FINE_OFF_LSBS 0x1d +#define TVP7002_B_COARSE_OFF 0x1e +#define TVP7002_G_COARSE_OFF 0x1f +#define TVP7002_R_COARSE_OFF 0x20 +#define TVP7002_HSOUT_OUT_START 0x21 +#define TVP7002_MISC_CTL_4 0x22 +#define TVP7002_B_DGTL_ALC_OUT_LSBS 0x23 +#define TVP7002_G_DGTL_ALC_OUT_LSBS 0x24 +#define TVP7002_R_DGTL_ALC_OUT_LSBS 0x25 +#define TVP7002_AUTO_LVL_CTL_ENABLE 0x26 +#define TVP7002_DGTL_ALC_OUT_MSBS 0x27 +#define TVP7002_AUTO_LVL_CTL_FILTER 0x28 +/* Reserved 0x29*/ +#define TVP7002_FINE_CLAMP_CTL 0x2a +#define TVP7002_PWR_CTL 0x2b +#define TVP7002_ADC_SETUP 0x2c +#define TVP7002_COARSE_CLAMP_CTL 0x2d +#define TVP7002_SOG_CLAMP 0x2e +#define TVP7002_RGB_COARSE_CLAMP_CTL 0x2f +#define TVP7002_SOG_COARSE_CLAMP_CTL 0x30 +#define TVP7002_ALC_PLACEMENT 0x31 +/* Reserved 0x32 */ +/* Reserved 0x33 */ +#define TVP7002_MVIS_STRIPPER_W 0x34 +#define TVP7002_VSYNC_ALGN 0x35 +#define TVP7002_SYNC_BYPASS 0x36 +#define TVP7002_L_FRAME_STAT_LSBS 0x37 +#define TVP7002_L_FRAME_STAT_MSBS 0x38 +#define TVP7002_CLK_L_STAT_LSBS 0x39 +#define TVP7002_CLK_L_STAT_MSBS 0x3a +#define TVP7002_HSYNC_W 0x3b +#define TVP7002_VSYNC_W 0x3c +#define TVP7002_L_LENGTH_TOL 0x3d +/* Reserved 0x3e */ +#define TVP7002_VIDEO_BWTH_CTL 0x3f +#define TVP7002_AVID_START_PIXEL_LSBS 0x40 +#define TVP7002_AVID_START_PIXEL_MSBS 0x41 +#define TVP7002_AVID_STOP_PIXEL_LSBS 0x42 +#define TVP7002_AVID_STOP_PIXEL_MSBS 0x43 +#define TVP7002_VBLK_F_0_START_L_OFF 0x44 +#define TVP7002_VBLK_F_1_START_L_OFF 0x45 +#define TVP7002_VBLK_F_0_DURATION 0x46 +#define TVP7002_VBLK_F_1_DURATION 0x47 +#define TVP7002_FBIT_F_0_START_L_OFF 0x48 +#define TVP7002_FBIT_F_1_START_L_OFF 0x49 +#define TVP7002_YUV_Y_G_COEF_LSBS 0x4a +#define TVP7002_YUV_Y_G_COEF_MSBS 0x4b +#define TVP7002_YUV_Y_B_COEF_LSBS 0x4c +#define TVP7002_YUV_Y_B_COEF_MSBS 0x4d +#define TVP7002_YUV_Y_R_COEF_LSBS 0x4e +#define TVP7002_YUV_Y_R_COEF_MSBS 0x4f +#define TVP7002_YUV_U_G_COEF_LSBS 0x50 +#define TVP7002_YUV_U_G_COEF_MSBS 0x51 +#define TVP7002_YUV_U_B_COEF_LSBS 0x52 +#define TVP7002_YUV_U_B_COEF_MSBS 0x53 +#define TVP7002_YUV_U_R_COEF_LSBS 0x54 +#define TVP7002_YUV_U_R_COEF_MSBS 0x55 +#define TVP7002_YUV_V_G_COEF_LSBS 0x56 +#define TVP7002_YUV_V_G_COEF_MSBS 0x57 +#define TVP7002_YUV_V_B_COEF_LSBS 0x58 +#define TVP7002_YUV_V_B_COEF_MSBS 0x59 +#define TVP7002_YUV_V_R_COEF_LSBS 0x5a +#define TVP7002_YUV_V_R_COEF_MSBS 0x5b + diff --git a/drivers/media/i2c/upd64031a.c b/drivers/media/i2c/upd64031a.c new file mode 100644 index 000000000000..1e7446542091 --- /dev/null +++ b/drivers/media/i2c/upd64031a.c @@ -0,0 +1,274 @@ +/* + * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan + * + * 2003 by T.Adachi <tadachi@tadachi-net.com> + * 2003 by Takeru KOMORIYA <komoriya@paken.org> + * 2006 by Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/upd64031a.h> + +/* --------------------- read registers functions define -------------------- */ + +/* bit masks */ +#define GR_MODE_MASK 0xc0 +#define DIRECT_3DYCS_CONNECT_MASK 0xc0 +#define SYNC_CIRCUIT_MASK 0xa0 + +/* -------------------------------------------------------------------------- */ + +MODULE_DESCRIPTION("uPD64031A driver"); +MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +enum { + R00 = 0, R01, R02, R03, R04, + R05, R06, R07, R08, R09, + R0A, R0B, R0C, R0D, R0E, R0F, + /* unused registers + R10, R11, R12, R13, R14, + R15, R16, R17, + */ + TOT_REGS +}; + +struct upd64031a_state { + struct v4l2_subdev sd; + u8 regs[TOT_REGS]; + u8 gr_mode; + u8 direct_3dycs_connect; + u8 ext_comp_sync; + u8 ext_vert_sync; +}; + +static inline struct upd64031a_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct upd64031a_state, sd); +} + +static u8 upd64031a_init[] = { + 0x00, 0xb8, 0x48, 0xd2, 0xe6, + 0x03, 0x10, 0x0b, 0xaf, 0x7f, + 0x00, 0x00, 0x1d, 0x5e, 0x00, + 0xd0 +}; + +/* ------------------------------------------------------------------------ */ + +static u8 upd64031a_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + if (reg >= sizeof(buf)) + return 0xff; + i2c_master_recv(client, buf, 2); + return buf[reg]; +} + +/* ------------------------------------------------------------------------ */ + +static void upd64031a_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + v4l2_dbg(1, debug, sd, "write reg: %02X val: %02X\n", reg, val); + if (i2c_master_send(client, buf, 2) != 2) + v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val); +} + +/* ------------------------------------------------------------------------ */ + +/* The input changed due to new input or channel changed */ +static int upd64031a_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) +{ + struct upd64031a_state *state = to_state(sd); + u8 reg = state->regs[R00]; + + v4l2_dbg(1, debug, sd, "changed input or channel\n"); + upd64031a_write(sd, R00, reg | 0x10); + upd64031a_write(sd, R00, reg & ~0x10); + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int upd64031a_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct upd64031a_state *state = to_state(sd); + u8 r00, r05, r08; + + state->gr_mode = (input & 3) << 6; + state->direct_3dycs_connect = (input & 0xc) << 4; + state->ext_comp_sync = + (input & UPD64031A_COMPOSITE_EXTERNAL) << 1; + state->ext_vert_sync = + (input & UPD64031A_VERTICAL_EXTERNAL) << 2; + r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode; + r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) | + state->ext_comp_sync | state->ext_vert_sync; + r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) | + state->direct_3dycs_connect; + upd64031a_write(sd, R00, r00); + upd64031a_write(sd, R05, r05); + upd64031a_write(sd, R08, r08); + return upd64031a_s_frequency(sd, NULL); +} + +static int upd64031a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64031A, 0); +} + +static int upd64031a_log_status(struct v4l2_subdev *sd) +{ + v4l2_info(sd, "Status: SA00=0x%02x SA01=0x%02x\n", + upd64031a_read(sd, 0), upd64031a_read(sd, 1)); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int upd64031a_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = upd64031a_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int upd64031a_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + upd64031a_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops upd64031a_core_ops = { + .log_status = upd64031a_log_status, + .g_chip_ident = upd64031a_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = upd64031a_g_register, + .s_register = upd64031a_s_register, +#endif +}; + +static const struct v4l2_subdev_tuner_ops upd64031a_tuner_ops = { + .s_frequency = upd64031a_s_frequency, +}; + +static const struct v4l2_subdev_video_ops upd64031a_video_ops = { + .s_routing = upd64031a_s_routing, +}; + +static const struct v4l2_subdev_ops upd64031a_ops = { + .core = &upd64031a_core_ops, + .tuner = &upd64031a_tuner_ops, + .video = &upd64031a_video_ops, +}; + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static int upd64031a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct upd64031a_state *state; + struct v4l2_subdev *sd; + int i; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &upd64031a_ops); + memcpy(state->regs, upd64031a_init, sizeof(state->regs)); + state->gr_mode = UPD64031A_GR_ON << 6; + state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4; + state->ext_comp_sync = state->ext_vert_sync = 0; + for (i = 0; i < TOT_REGS; i++) + upd64031a_write(sd, i, state->regs[i]); + return 0; +} + +static int upd64031a_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id upd64031a_id[] = { + { "upd64031a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, upd64031a_id); + +static struct i2c_driver upd64031a_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "upd64031a", + }, + .probe = upd64031a_probe, + .remove = upd64031a_remove, + .id_table = upd64031a_id, +}; + +module_i2c_driver(upd64031a_driver); diff --git a/drivers/media/i2c/upd64083.c b/drivers/media/i2c/upd64083.c new file mode 100644 index 000000000000..75d6acc62018 --- /dev/null +++ b/drivers/media/i2c/upd64083.c @@ -0,0 +1,246 @@ +/* + * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver + * + * 2003 by T.Adachi (tadachi@tadachi-net.com) + * 2003 by Takeru KOMORIYA <komoriya@paken.org> + * 2006 by Hans Verkuil <hverkuil@xs4all.nl> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/upd64083.h> + +MODULE_DESCRIPTION("uPD64083 driver"); +MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static bool debug; +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +enum { + R00 = 0, R01, R02, R03, R04, + R05, R06, R07, R08, R09, + R0A, R0B, R0C, R0D, R0E, R0F, + R10, R11, R12, R13, R14, + R15, R16, + TOT_REGS +}; + +struct upd64083_state { + struct v4l2_subdev sd; + u8 mode; + u8 ext_y_adc; + u8 regs[TOT_REGS]; +}; + +static inline struct upd64083_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct upd64083_state, sd); +} + +/* Initial values when used in combination with the + NEC upd64031a ghost reduction chip. */ +static u8 upd64083_init[] = { + 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */ + 0x36, 0xdd, 0x05, 0x56, 0x48, + 0x00, 0x3a, 0xa0, 0x05, 0x08, + 0x44, 0x60, 0x08, 0x52, 0xf8, + 0x53, 0x60, 0x10 +}; + +/* ------------------------------------------------------------------------ */ + +static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = reg; + buf[1] = val; + v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n", reg, val); + if (i2c_master_send(client, buf, 2) != 2) + v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val); +} + +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[7]; + + if (reg >= sizeof(buf)) + return 0xff; + i2c_master_recv(client, buf, sizeof(buf)); + return buf[reg]; +} +#endif + +/* ------------------------------------------------------------------------ */ + +static int upd64083_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct upd64083_state *state = to_state(sd); + u8 r00, r02; + + if (input > 7 || (input & 6) == 6) + return -EINVAL; + state->mode = (input & 3) << 6; + state->ext_y_adc = (input & UPD64083_EXT_Y_ADC) << 3; + r00 = (state->regs[R00] & ~(3 << 6)) | state->mode; + r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc; + upd64083_write(sd, R00, r00); + upd64083_write(sd, R02, r02); + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = upd64083_read(sd, reg->reg & 0xff); + reg->size = 1; + return 0; +} + +static int upd64083_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + upd64083_write(sd, reg->reg & 0xff, reg->val & 0xff); + return 0; +} +#endif + +static int upd64083_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64083, 0); +} + +static int upd64083_log_status(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[7]; + + i2c_master_recv(client, buf, 7); + v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x " + "SA04=%02x SA05=%02x SA06=%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops upd64083_core_ops = { + .log_status = upd64083_log_status, + .g_chip_ident = upd64083_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = upd64083_g_register, + .s_register = upd64083_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops upd64083_video_ops = { + .s_routing = upd64083_s_routing, +}; + +static const struct v4l2_subdev_ops upd64083_ops = { + .core = &upd64083_core_ops, + .video = &upd64083_video_ops, +}; + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static int upd64083_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct upd64083_state *state; + struct v4l2_subdev *sd; + int i; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &upd64083_ops); + /* Initially assume that a ghost reduction chip is present */ + state->mode = 0; /* YCS mode */ + state->ext_y_adc = (1 << 5); + memcpy(state->regs, upd64083_init, TOT_REGS); + for (i = 0; i < TOT_REGS; i++) + upd64083_write(sd, i, state->regs[i]); + return 0; +} + +static int upd64083_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id upd64083_id[] = { + { "upd64083", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, upd64083_id); + +static struct i2c_driver upd64083_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "upd64083", + }, + .probe = upd64083_probe, + .remove = upd64083_remove, + .id_table = upd64083_id, +}; + +module_i2c_driver(upd64083_driver); diff --git a/drivers/media/i2c/vp27smpx.c b/drivers/media/i2c/vp27smpx.c new file mode 100644 index 000000000000..7cfbc9d94a48 --- /dev/null +++ b/drivers/media/i2c/vp27smpx.c @@ -0,0 +1,211 @@ +/* + * vp27smpx - driver version 0.0.1 + * + * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * + * Based on a tvaudio patch from Takahiro Adachi <tadachi@tadachi-net.com> + * and Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("vp27smpx driver"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + + +/* ----------------------------------------------------------------------- */ + +struct vp27smpx_state { + struct v4l2_subdev sd; + int radio; + u32 audmode; +}; + +static inline struct vp27smpx_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vp27smpx_state, sd); +} + +static void vp27smpx_set_audmode(struct v4l2_subdev *sd, u32 audmode) +{ + struct vp27smpx_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 data[3] = { 0x00, 0x00, 0x04 }; + + switch (audmode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + data[1] = 0x01; + break; + case V4L2_TUNER_MODE_LANG2: + data[1] = 0x02; + break; + } + + if (i2c_master_send(client, data, sizeof(data)) != sizeof(data)) + v4l2_err(sd, "I/O error setting audmode\n"); + else + state->audmode = audmode; +} + +static int vp27smpx_s_radio(struct v4l2_subdev *sd) +{ + struct vp27smpx_state *state = to_state(sd); + + state->radio = 1; + return 0; +} + +static int vp27smpx_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + struct vp27smpx_state *state = to_state(sd); + + state->radio = 0; + return 0; +} + +static int vp27smpx_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct vp27smpx_state *state = to_state(sd); + + if (!state->radio) + vp27smpx_set_audmode(sd, vt->audmode); + return 0; +} + +static int vp27smpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct vp27smpx_state *state = to_state(sd); + + if (state->radio) + return 0; + vt->audmode = state->audmode; + vt->capability = V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_MONO; + return 0; +} + +static int vp27smpx_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VP27SMPX, 0); +} + +static int vp27smpx_log_status(struct v4l2_subdev *sd) +{ + struct vp27smpx_state *state = to_state(sd); + + v4l2_info(sd, "Audio Mode: %u%s\n", state->audmode, + state->radio ? " (Radio)" : ""); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_core_ops vp27smpx_core_ops = { + .log_status = vp27smpx_log_status, + .g_chip_ident = vp27smpx_g_chip_ident, + .s_std = vp27smpx_s_std, +}; + +static const struct v4l2_subdev_tuner_ops vp27smpx_tuner_ops = { + .s_radio = vp27smpx_s_radio, + .s_tuner = vp27smpx_s_tuner, + .g_tuner = vp27smpx_g_tuner, +}; + +static const struct v4l2_subdev_ops vp27smpx_ops = { + .core = &vp27smpx_core_ops, + .tuner = &vp27smpx_tuner_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int vp27smpx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vp27smpx_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct vp27smpx_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &vp27smpx_ops); + state->audmode = V4L2_TUNER_MODE_STEREO; + + /* initialize vp27smpx */ + vp27smpx_set_audmode(sd, state->audmode); + return 0; +} + +static int vp27smpx_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); + kfree(to_state(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id vp27smpx_id[] = { + { "vp27smpx", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vp27smpx_id); + +static struct i2c_driver vp27smpx_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vp27smpx", + }, + .probe = vp27smpx_probe, + .remove = vp27smpx_remove, + .id_table = vp27smpx_id, +}; + +module_i2c_driver(vp27smpx_driver); diff --git a/drivers/media/i2c/vpx3220.c b/drivers/media/i2c/vpx3220.c new file mode 100644 index 000000000000..2f67b4c5c823 --- /dev/null +++ b/drivers/media/i2c/vpx3220.c @@ -0,0 +1,591 @@ +/* + * vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1 + * + * Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); +MODULE_AUTHOR("Laurent Pinchart"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +#define VPX_TIMEOUT_COUNT 10 + +/* ----------------------------------------------------------------------- */ + +struct vpx3220 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + unsigned char reg[255]; + + v4l2_std_id norm; + int ident; + int input; + int enable; +}; + +static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vpx3220, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vpx3220, hdl)->sd; +} + +static char *inputs[] = { "internal", "composite", "svideo" }; + +/* ----------------------------------------------------------------------- */ + +static inline int vpx3220_write(struct v4l2_subdev *sd, u8 reg, u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct vpx3220 *decoder = i2c_get_clientdata(client); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int vpx3220_read(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_read_byte_data(client, reg); +} + +static int vpx3220_fp_status(struct v4l2_subdev *sd) +{ + unsigned char status; + unsigned int i; + + for (i = 0; i < VPX_TIMEOUT_COUNT; i++) { + status = vpx3220_read(sd, 0x29); + + if (!(status & 4)) + return 0; + + udelay(10); + + if (need_resched()) + cond_resched(); + } + + return -1; +} + +static int vpx3220_fp_write(struct v4l2_subdev *sd, u8 fpaddr, u16 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + /* Write the 16-bit address to the FPWR register */ + if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + if (vpx3220_fp_status(sd) < 0) + return -1; + + /* Write the 16-bit data to the FPDAT register */ + if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + return 0; +} + +static u16 vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + s16 data; + + /* Write the 16-bit address to the FPRD register */ + if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + if (vpx3220_fp_status(sd) < 0) + return -1; + + /* Read the 16-bit data from the FPDAT register */ + data = i2c_smbus_read_word_data(client, 0x28); + if (data == -1) { + v4l2_dbg(1, debug, sd, "%s: failed\n", __func__); + return -1; + } + + return swab16(data); +} + +static int vpx3220_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len) +{ + u8 reg; + int ret = -1; + + while (len >= 2) { + reg = *data++; + ret = vpx3220_write(sd, reg, *data++); + if (ret < 0) + break; + len -= 2; + } + + return ret; +} + +static int vpx3220_write_fp_block(struct v4l2_subdev *sd, + const u16 *data, unsigned int len) +{ + u8 reg; + int ret = 0; + + while (len > 1) { + reg = *data++; + ret |= vpx3220_fp_write(sd, reg, *data++); + len -= 2; + } + + return ret; +} + +/* ---------------------------------------------------------------------- */ + +static const unsigned short init_ntsc[] = { + 0x1c, 0x00, /* NTSC tint angle */ + 0x88, 17, /* Window 1 vertical */ + 0x89, 240, /* Vertical lines in */ + 0x8a, 240, /* Vertical lines out */ + 0x8b, 000, /* Horizontal begin */ + 0x8c, 640, /* Horizontal length */ + 0x8d, 640, /* Number of pixels */ + 0x8f, 0xc00, /* Disable window 2 */ + 0xf0, 0x73, /* 13.5 MHz transport, Forced + * mode, latch windows */ + 0xf2, 0x13, /* NTSC M, composite input */ + 0xe7, 0x1e1, /* Enable vertical standard + * locking @ 240 lines */ +}; + +static const unsigned short init_pal[] = { + 0x88, 23, /* Window 1 vertical begin */ + 0x89, 288, /* Vertical lines in (16 lines + * skipped by the VFE) */ + 0x8a, 288, /* Vertical lines out (16 lines + * skipped by the VFE) */ + 0x8b, 16, /* Horizontal begin */ + 0x8c, 768, /* Horizontal length */ + 0x8d, 784, /* Number of pixels + * Must be >= Horizontal begin + Horizontal length */ + 0x8f, 0xc00, /* Disable window 2 */ + 0xf0, 0x77, /* 13.5 MHz transport, Forced + * mode, latch windows */ + 0xf2, 0x3d1, /* PAL B,G,H,I, composite input */ + 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ +}; + +static const unsigned short init_secam[] = { + 0x88, 23, /* Window 1 vertical begin */ + 0x89, 288, /* Vertical lines in (16 lines + * skipped by the VFE) */ + 0x8a, 288, /* Vertical lines out (16 lines + * skipped by the VFE) */ + 0x8b, 16, /* Horizontal begin */ + 0x8c, 768, /* Horizontal length */ + 0x8d, 784, /* Number of pixels + * Must be >= Horizontal begin + Horizontal length */ + 0x8f, 0xc00, /* Disable window 2 */ + 0xf0, 0x77, /* 13.5 MHz transport, Forced + * mode, latch windows */ + 0xf2, 0x3d5, /* SECAM, composite input */ + 0xe7, 0x241, /* PAL/SECAM set to 288 lines */ +}; + +static const unsigned char init_common[] = { + 0xf2, 0x00, /* Disable all outputs */ + 0x33, 0x0d, /* Luma : VIN2, Chroma : CIN + * (clamp off) */ + 0xd8, 0xa8, /* HREF/VREF active high, VREF + * pulse = 2, Odd/Even flag */ + 0x20, 0x03, /* IF compensation 0dB/oct */ + 0xe0, 0xff, /* Open up all comparators */ + 0xe1, 0x00, + 0xe2, 0x7f, + 0xe3, 0x80, + 0xe4, 0x7f, + 0xe5, 0x80, + 0xe6, 0x00, /* Brightness set to 0 */ + 0xe7, 0xe0, /* Contrast to 1.0, noise shaping + * 10 to 8 2-bit error diffusion */ + 0xe8, 0xf8, /* YUV422, CbCr binary offset, + * ... (p.32) */ + 0xea, 0x18, /* LLC2 connected, output FIFO + * reset with VACTintern */ + 0xf0, 0x8a, /* Half full level to 10, bus + * shuffler [7:0, 23:16, 15:8] */ + 0xf1, 0x18, /* Single clock, sync mode, no + * FE delay, no HLEN counter */ + 0xf8, 0x12, /* Port A, PIXCLK, HF# & FE# + * strength to 2 */ + 0xf9, 0x24, /* Port B, HREF, VREF, PREF & + * ALPHA strength to 4 */ +}; + +static const unsigned short init_fp[] = { + 0x59, 0, + 0xa0, 2070, /* ACC reference */ + 0xa3, 0, + 0xa4, 0, + 0xa8, 30, + 0xb2, 768, + 0xbe, 27, + 0x58, 0, + 0x26, 0, + 0x4b, 0x298, /* PLL gain */ +}; + + +static int vpx3220_init(struct v4l2_subdev *sd, u32 val) +{ + struct vpx3220 *decoder = to_vpx3220(sd); + + vpx3220_write_block(sd, init_common, sizeof(init_common)); + vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1); + if (decoder->norm & V4L2_STD_NTSC) + vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1); + else if (decoder->norm & V4L2_STD_PAL) + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + else if (decoder->norm & V4L2_STD_SECAM) + vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1); + else + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + return 0; +} + +static int vpx3220_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd) +{ + int res = V4L2_IN_ST_NO_SIGNAL, status; + v4l2_std_id std = 0; + + status = vpx3220_fp_read(sd, 0x0f3); + + v4l2_dbg(1, debug, sd, "status: 0x%04x\n", status); + + if (status < 0) + return status; + + if ((status & 0x20) == 0) { + res = 0; + + switch (status & 0x18) { + case 0x00: + case 0x10: + case 0x14: + case 0x18: + std = V4L2_STD_PAL; + break; + + case 0x08: + std = V4L2_STD_SECAM; + break; + + case 0x04: + case 0x0c: + case 0x1c: + std = V4L2_STD_NTSC; + break; + } + } + if (pstd) + *pstd = std; + if (pstatus) + *pstatus = res; + return 0; +} + +static int vpx3220_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + v4l2_dbg(1, debug, sd, "querystd\n"); + return vpx3220_status(sd, NULL, std); +} + +static int vpx3220_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + v4l2_dbg(1, debug, sd, "g_input_status\n"); + return vpx3220_status(sd, status, NULL); +} + +static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct vpx3220 *decoder = to_vpx3220(sd); + int temp_input; + + /* Here we back up the input selection because it gets + overwritten when we fill the registers with the + chosen video norm */ + temp_input = vpx3220_fp_read(sd, 0xf2); + + v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std); + if (std & V4L2_STD_NTSC) { + vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1); + v4l2_dbg(1, debug, sd, "norm switched to NTSC\n"); + } else if (std & V4L2_STD_PAL) { + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + v4l2_dbg(1, debug, sd, "norm switched to PAL\n"); + } else if (std & V4L2_STD_SECAM) { + vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1); + v4l2_dbg(1, debug, sd, "norm switched to SECAM\n"); + } else { + return -EINVAL; + } + + decoder->norm = std; + + /* And here we set the backed up video input again */ + vpx3220_fp_write(sd, 0xf2, temp_input | 0x0010); + udelay(10); + return 0; +} + +static int vpx3220_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + int data; + + /* RJ: input = 0: ST8 (PCTV) input + input = 1: COMPOSITE input + input = 2: SVHS input */ + + const int input_vals[3][2] = { + {0x0c, 0}, + {0x0d, 0}, + {0x0e, 1} + }; + + if (input > 2) + return -EINVAL; + + v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[input]); + + vpx3220_write(sd, 0x33, input_vals[input][0]); + + data = vpx3220_fp_read(sd, 0xf2) & ~(0x0020); + if (data < 0) + return data; + /* 0x0010 is required to latch the setting */ + vpx3220_fp_write(sd, 0xf2, + data | (input_vals[input][1] << 5) | 0x0010); + + udelay(10); + return 0; +} + +static int vpx3220_s_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "s_stream %s\n", enable ? "on" : "off"); + + vpx3220_write(sd, 0xf2, (enable ? 0x1b : 0x00)); + return 0; +} + +static int vpx3220_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + vpx3220_write(sd, 0xe6, ctrl->val); + return 0; + case V4L2_CID_CONTRAST: + /* Bit 7 and 8 is for noise shaping */ + vpx3220_write(sd, 0xe7, ctrl->val + 192); + return 0; + case V4L2_CID_SATURATION: + vpx3220_fp_write(sd, 0xa0, ctrl->val); + return 0; + case V4L2_CID_HUE: + vpx3220_fp_write(sd, 0x1c, ctrl->val); + return 0; + } + return -EINVAL; +} + +static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct vpx3220 *decoder = to_vpx3220(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0); +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops vpx3220_ctrl_ops = { + .s_ctrl = vpx3220_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops vpx3220_core_ops = { + .g_chip_ident = vpx3220_g_chip_ident, + .init = vpx3220_init, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .s_std = vpx3220_s_std, +}; + +static const struct v4l2_subdev_video_ops vpx3220_video_ops = { + .s_routing = vpx3220_s_routing, + .s_stream = vpx3220_s_stream, + .querystd = vpx3220_querystd, + .g_input_status = vpx3220_g_input_status, +}; + +static const struct v4l2_subdev_ops vpx3220_ops = { + .core = &vpx3220_core_ops, + .video = &vpx3220_video_ops, +}; + +/* ----------------------------------------------------------------------- + * Client management code + */ + +static int vpx3220_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vpx3220 *decoder; + struct v4l2_subdev *sd; + const char *name = NULL; + u8 ver; + u16 pn; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL); + if (decoder == NULL) + return -ENOMEM; + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &vpx3220_ops); + decoder->norm = V4L2_STD_PAL; + decoder->input = 0; + decoder->enable = 1; + v4l2_ctrl_handler_init(&decoder->hdl, 4); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_CONTRAST, 0, 63, 1, 32); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_SATURATION, 0, 4095, 1, 2048); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_HUE, -512, 511, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + + ver = i2c_smbus_read_byte_data(client, 0x00); + pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) + + i2c_smbus_read_byte_data(client, 0x01); + decoder->ident = V4L2_IDENT_VPX3220A; + if (ver == 0xec) { + switch (pn) { + case 0x4680: + name = "vpx3220a"; + break; + case 0x4260: + name = "vpx3216b"; + decoder->ident = V4L2_IDENT_VPX3216B; + break; + case 0x4280: + name = "vpx3214c"; + decoder->ident = V4L2_IDENT_VPX3214C; + break; + } + } + if (name) + v4l2_info(sd, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); + else + v4l2_info(sd, "chip (%02x:%04x) found @ 0x%x (%s)\n", + ver, pn, client->addr << 1, client->adapter->name); + + vpx3220_write_block(sd, init_common, sizeof(init_common)); + vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1); + /* Default to PAL */ + vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1); + return 0; +} + +static int vpx3220_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vpx3220 *decoder = to_vpx3220(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return 0; +} + +static const struct i2c_device_id vpx3220_id[] = { + { "vpx3220a", 0 }, + { "vpx3216b", 0 }, + { "vpx3214c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vpx3220_id); + +static struct i2c_driver vpx3220_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vpx3220", + }, + .probe = vpx3220_probe, + .remove = vpx3220_remove, + .id_table = vpx3220_id, +}; + +module_i2c_driver(vpx3220_driver); diff --git a/drivers/media/i2c/vs6624.c b/drivers/media/i2c/vs6624.c new file mode 100644 index 000000000000..42ae9dc9c574 --- /dev/null +++ b/drivers/media/i2c/vs6624.c @@ -0,0 +1,928 @@ +/* + * vs6624.c ST VS6624 CMOS image sensor driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> + +#include "vs6624_regs.h" + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 +#define QQCIF_WIDTH 88 +#define QQCIF_HEIGHT 72 + +#define MAX_FRAME_RATE 30 + +struct vs6624 { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_fract frame_rate; + struct v4l2_mbus_framefmt fmt; + unsigned ce_pin; +}; + +static const struct vs6624_format { + enum v4l2_mbus_pixelcode mbus_code; + enum v4l2_colorspace colorspace; +} vs6624_formats[] = { + { + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + { + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .colorspace = V4L2_COLORSPACE_SRGB, + }, +}; + +static struct v4l2_mbus_framefmt vs6624_default_fmt = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, +}; + +static const u16 vs6624_p1[] = { + 0x8104, 0x03, + 0x8105, 0x01, + 0xc900, 0x03, + 0xc904, 0x47, + 0xc905, 0x10, + 0xc906, 0x80, + 0xc907, 0x3a, + 0x903a, 0x02, + 0x903b, 0x47, + 0x903c, 0x15, + 0xc908, 0x31, + 0xc909, 0xdc, + 0xc90a, 0x80, + 0xc90b, 0x44, + 0x9044, 0x02, + 0x9045, 0x31, + 0x9046, 0xe2, + 0xc90c, 0x07, + 0xc90d, 0xe0, + 0xc90e, 0x80, + 0xc90f, 0x47, + 0x9047, 0x90, + 0x9048, 0x83, + 0x9049, 0x81, + 0x904a, 0xe0, + 0x904b, 0x60, + 0x904c, 0x08, + 0x904d, 0x90, + 0x904e, 0xc0, + 0x904f, 0x43, + 0x9050, 0x74, + 0x9051, 0x01, + 0x9052, 0xf0, + 0x9053, 0x80, + 0x9054, 0x05, + 0x9055, 0xE4, + 0x9056, 0x90, + 0x9057, 0xc0, + 0x9058, 0x43, + 0x9059, 0xf0, + 0x905a, 0x02, + 0x905b, 0x07, + 0x905c, 0xec, + 0xc910, 0x5d, + 0xc911, 0xca, + 0xc912, 0x80, + 0xc913, 0x5d, + 0x905d, 0xa3, + 0x905e, 0x04, + 0x905f, 0xf0, + 0x9060, 0xa3, + 0x9061, 0x04, + 0x9062, 0xf0, + 0x9063, 0x22, + 0xc914, 0x72, + 0xc915, 0x92, + 0xc916, 0x80, + 0xc917, 0x64, + 0x9064, 0x74, + 0x9065, 0x01, + 0x9066, 0x02, + 0x9067, 0x72, + 0x9068, 0x95, + 0xc918, 0x47, + 0xc919, 0xf2, + 0xc91a, 0x81, + 0xc91b, 0x69, + 0x9169, 0x74, + 0x916a, 0x02, + 0x916b, 0xf0, + 0x916c, 0xec, + 0x916d, 0xb4, + 0x916e, 0x10, + 0x916f, 0x0a, + 0x9170, 0x90, + 0x9171, 0x80, + 0x9172, 0x16, + 0x9173, 0xe0, + 0x9174, 0x70, + 0x9175, 0x04, + 0x9176, 0x90, + 0x9177, 0xd3, + 0x9178, 0xc4, + 0x9179, 0xf0, + 0x917a, 0x22, + 0xc91c, 0x0a, + 0xc91d, 0xbe, + 0xc91e, 0x80, + 0xc91f, 0x73, + 0x9073, 0xfc, + 0x9074, 0xa3, + 0x9075, 0xe0, + 0x9076, 0xf5, + 0x9077, 0x82, + 0x9078, 0x8c, + 0x9079, 0x83, + 0x907a, 0xa3, + 0x907b, 0xa3, + 0x907c, 0xe0, + 0x907d, 0xfc, + 0x907e, 0xa3, + 0x907f, 0xe0, + 0x9080, 0xc3, + 0x9081, 0x9f, + 0x9082, 0xff, + 0x9083, 0xec, + 0x9084, 0x9e, + 0x9085, 0xfe, + 0x9086, 0x02, + 0x9087, 0x0a, + 0x9088, 0xea, + 0xc920, 0x47, + 0xc921, 0x38, + 0xc922, 0x80, + 0xc923, 0x89, + 0x9089, 0xec, + 0x908a, 0xd3, + 0x908b, 0x94, + 0x908c, 0x20, + 0x908d, 0x40, + 0x908e, 0x01, + 0x908f, 0x1c, + 0x9090, 0x90, + 0x9091, 0xd3, + 0x9092, 0xd4, + 0x9093, 0xec, + 0x9094, 0xf0, + 0x9095, 0x02, + 0x9096, 0x47, + 0x9097, 0x3d, + 0xc924, 0x45, + 0xc925, 0xca, + 0xc926, 0x80, + 0xc927, 0x98, + 0x9098, 0x12, + 0x9099, 0x77, + 0x909a, 0xd6, + 0x909b, 0x02, + 0x909c, 0x45, + 0x909d, 0xcd, + 0xc928, 0x20, + 0xc929, 0xd5, + 0xc92a, 0x80, + 0xc92b, 0x9e, + 0x909e, 0x90, + 0x909f, 0x82, + 0x90a0, 0x18, + 0x90a1, 0xe0, + 0x90a2, 0xb4, + 0x90a3, 0x03, + 0x90a4, 0x0e, + 0x90a5, 0x90, + 0x90a6, 0x83, + 0x90a7, 0xbf, + 0x90a8, 0xe0, + 0x90a9, 0x60, + 0x90aa, 0x08, + 0x90ab, 0x90, + 0x90ac, 0x81, + 0x90ad, 0xfc, + 0x90ae, 0xe0, + 0x90af, 0xff, + 0x90b0, 0xc3, + 0x90b1, 0x13, + 0x90b2, 0xf0, + 0x90b3, 0x90, + 0x90b4, 0x81, + 0x90b5, 0xfc, + 0x90b6, 0xe0, + 0x90b7, 0xff, + 0x90b8, 0x02, + 0x90b9, 0x20, + 0x90ba, 0xda, + 0xc92c, 0x70, + 0xc92d, 0xbc, + 0xc92e, 0x80, + 0xc92f, 0xbb, + 0x90bb, 0x90, + 0x90bc, 0x82, + 0x90bd, 0x18, + 0x90be, 0xe0, + 0x90bf, 0xb4, + 0x90c0, 0x03, + 0x90c1, 0x06, + 0x90c2, 0x90, + 0x90c3, 0xc1, + 0x90c4, 0x06, + 0x90c5, 0x74, + 0x90c6, 0x05, + 0x90c7, 0xf0, + 0x90c8, 0x90, + 0x90c9, 0xd3, + 0x90ca, 0xa0, + 0x90cb, 0x02, + 0x90cc, 0x70, + 0x90cd, 0xbf, + 0xc930, 0x72, + 0xc931, 0x21, + 0xc932, 0x81, + 0xc933, 0x3b, + 0x913b, 0x7d, + 0x913c, 0x02, + 0x913d, 0x7f, + 0x913e, 0x7b, + 0x913f, 0x02, + 0x9140, 0x72, + 0x9141, 0x25, + 0xc934, 0x28, + 0xc935, 0xae, + 0xc936, 0x80, + 0xc937, 0xd2, + 0x90d2, 0xf0, + 0x90d3, 0x90, + 0x90d4, 0xd2, + 0x90d5, 0x0a, + 0x90d6, 0x02, + 0x90d7, 0x28, + 0x90d8, 0xb4, + 0xc938, 0x28, + 0xc939, 0xb1, + 0xc93a, 0x80, + 0xc93b, 0xd9, + 0x90d9, 0x90, + 0x90da, 0x83, + 0x90db, 0xba, + 0x90dc, 0xe0, + 0x90dd, 0xff, + 0x90de, 0x90, + 0x90df, 0xd2, + 0x90e0, 0x08, + 0x90e1, 0xe0, + 0x90e2, 0xe4, + 0x90e3, 0xef, + 0x90e4, 0xf0, + 0x90e5, 0xa3, + 0x90e6, 0xe0, + 0x90e7, 0x74, + 0x90e8, 0xff, + 0x90e9, 0xf0, + 0x90ea, 0x90, + 0x90eb, 0xd2, + 0x90ec, 0x0a, + 0x90ed, 0x02, + 0x90ee, 0x28, + 0x90ef, 0xb4, + 0xc93c, 0x29, + 0xc93d, 0x79, + 0xc93e, 0x80, + 0xc93f, 0xf0, + 0x90f0, 0xf0, + 0x90f1, 0x90, + 0x90f2, 0xd2, + 0x90f3, 0x0e, + 0x90f4, 0x02, + 0x90f5, 0x29, + 0x90f6, 0x7f, + 0xc940, 0x29, + 0xc941, 0x7c, + 0xc942, 0x80, + 0xc943, 0xf7, + 0x90f7, 0x90, + 0x90f8, 0x83, + 0x90f9, 0xba, + 0x90fa, 0xe0, + 0x90fb, 0xff, + 0x90fc, 0x90, + 0x90fd, 0xd2, + 0x90fe, 0x0c, + 0x90ff, 0xe0, + 0x9100, 0xe4, + 0x9101, 0xef, + 0x9102, 0xf0, + 0x9103, 0xa3, + 0x9104, 0xe0, + 0x9105, 0x74, + 0x9106, 0xff, + 0x9107, 0xf0, + 0x9108, 0x90, + 0x9109, 0xd2, + 0x910a, 0x0e, + 0x910b, 0x02, + 0x910c, 0x29, + 0x910d, 0x7f, + 0xc944, 0x2a, + 0xc945, 0x42, + 0xc946, 0x81, + 0xc947, 0x0e, + 0x910e, 0xf0, + 0x910f, 0x90, + 0x9110, 0xd2, + 0x9111, 0x12, + 0x9112, 0x02, + 0x9113, 0x2a, + 0x9114, 0x48, + 0xc948, 0x2a, + 0xc949, 0x45, + 0xc94a, 0x81, + 0xc94b, 0x15, + 0x9115, 0x90, + 0x9116, 0x83, + 0x9117, 0xba, + 0x9118, 0xe0, + 0x9119, 0xff, + 0x911a, 0x90, + 0x911b, 0xd2, + 0x911c, 0x10, + 0x911d, 0xe0, + 0x911e, 0xe4, + 0x911f, 0xef, + 0x9120, 0xf0, + 0x9121, 0xa3, + 0x9122, 0xe0, + 0x9123, 0x74, + 0x9124, 0xff, + 0x9125, 0xf0, + 0x9126, 0x90, + 0x9127, 0xd2, + 0x9128, 0x12, + 0x9129, 0x02, + 0x912a, 0x2a, + 0x912b, 0x48, + 0xc900, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_p2[] = { + 0x806f, 0x01, + 0x058c, 0x01, + 0x0000, 0x00, +}; + +static const u16 vs6624_run_setup[] = { + 0x1d18, 0x00, /* Enableconstrainedwhitebalance */ + VS6624_PEAK_MIN_OUT_G_MSB, 0x3c, /* Damper PeakGain Output MSB */ + VS6624_PEAK_MIN_OUT_G_LSB, 0x66, /* Damper PeakGain Output LSB */ + VS6624_CM_LOW_THR_MSB, 0x65, /* Damper Low MSB */ + VS6624_CM_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_CM_HIGH_THR_MSB, 0x66, /* Damper High MSB */ + VS6624_CM_HIGH_THR_LSB, 0x62, /* Damper High LSB */ + VS6624_CM_MIN_OUT_MSB, 0x00, /* Damper Min output MSB */ + VS6624_CM_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_NORA_DISABLE, 0x00, /* Nora fDisable */ + VS6624_NORA_USAGE, 0x04, /* Nora usage */ + VS6624_NORA_LOW_THR_MSB, 0x63, /* Damper Low MSB Changed 0x63 to 0x65 */ + VS6624_NORA_LOW_THR_LSB, 0xd1, /* Damper Low LSB */ + VS6624_NORA_HIGH_THR_MSB, 0x68, /* Damper High MSB */ + VS6624_NORA_HIGH_THR_LSB, 0xdd, /* Damper High LSB */ + VS6624_NORA_MIN_OUT_MSB, 0x3a, /* Damper Min output MSB */ + VS6624_NORA_MIN_OUT_LSB, 0x00, /* Damper Min output LSB */ + VS6624_F2B_DISABLE, 0x00, /* Disable */ + 0x1d8a, 0x30, /* MAXWeightHigh */ + 0x1d91, 0x62, /* fpDamperLowThresholdHigh MSB */ + 0x1d92, 0x4a, /* fpDamperLowThresholdHigh LSB */ + 0x1d95, 0x65, /* fpDamperHighThresholdHigh MSB */ + 0x1d96, 0x0e, /* fpDamperHighThresholdHigh LSB */ + 0x1da1, 0x3a, /* fpMinimumDamperOutputLow MSB */ + 0x1da2, 0xb8, /* fpMinimumDamperOutputLow LSB */ + 0x1e08, 0x06, /* MAXWeightLow */ + 0x1e0a, 0x0a, /* MAXWeightHigh */ + 0x1601, 0x3a, /* Red A MSB */ + 0x1602, 0x14, /* Red A LSB */ + 0x1605, 0x3b, /* Blue A MSB */ + 0x1606, 0x85, /* BLue A LSB */ + 0x1609, 0x3b, /* RED B MSB */ + 0x160a, 0x85, /* RED B LSB */ + 0x160d, 0x3a, /* Blue B MSB */ + 0x160e, 0x14, /* Blue B LSB */ + 0x1611, 0x30, /* Max Distance from Locus MSB */ + 0x1612, 0x8f, /* Max Distance from Locus MSB */ + 0x1614, 0x01, /* Enable constrainer */ + 0x0000, 0x00, +}; + +static const u16 vs6624_default[] = { + VS6624_CONTRAST0, 0x84, + VS6624_SATURATION0, 0x75, + VS6624_GAMMA0, 0x11, + VS6624_CONTRAST1, 0x84, + VS6624_SATURATION1, 0x75, + VS6624_GAMMA1, 0x11, + VS6624_MAN_RG, 0x80, + VS6624_MAN_GG, 0x80, + VS6624_MAN_BG, 0x80, + VS6624_WB_MODE, 0x1, + VS6624_EXPO_COMPENSATION, 0xfe, + VS6624_EXPO_METER, 0x0, + VS6624_LIGHT_FREQ, 0x64, + VS6624_PEAK_GAIN, 0xe, + VS6624_PEAK_LOW_THR, 0x28, + VS6624_HMIRROR0, 0x0, + VS6624_VFLIP0, 0x0, + VS6624_ZOOM_HSTEP0_MSB, 0x0, + VS6624_ZOOM_HSTEP0_LSB, 0x1, + VS6624_ZOOM_VSTEP0_MSB, 0x0, + VS6624_ZOOM_VSTEP0_LSB, 0x1, + VS6624_PAN_HSTEP0_MSB, 0x0, + VS6624_PAN_HSTEP0_LSB, 0xf, + VS6624_PAN_VSTEP0_MSB, 0x0, + VS6624_PAN_VSTEP0_LSB, 0xf, + VS6624_SENSOR_MODE, 0x1, + VS6624_SYNC_CODE_SETUP, 0x21, + VS6624_DISABLE_FR_DAMPER, 0x0, + VS6624_FR_DEN, 0x1, + VS6624_FR_NUM_LSB, 0xf, + VS6624_INIT_PIPE_SETUP, 0x0, + VS6624_IMG_FMT0, 0x0, + VS6624_YUV_SETUP, 0x1, + VS6624_IMAGE_SIZE0, 0x2, + 0x0000, 0x00, +}; + +static inline struct vs6624 *to_vs6624(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vs6624, sd); +} +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vs6624, hdl)->sd; +} + +static int vs6624_read(struct v4l2_subdev *sd, u16 index) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[2]; + + buf[0] = index >> 8; + buf[1] = index; + i2c_master_send(client, buf, 2); + i2c_master_recv(client, buf, 1); + + return buf[0]; +} + +static int vs6624_write(struct v4l2_subdev *sd, u16 index, + u8 value) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 buf[3]; + + buf[0] = index >> 8; + buf[1] = index; + buf[2] = value; + + return i2c_master_send(client, buf, 3); +} + +static int vs6624_writeregs(struct v4l2_subdev *sd, const u16 *regs) +{ + u16 reg; + u8 data; + + while (*regs != 0x00) { + reg = *regs++; + data = *regs++; + + vs6624_write(sd, reg, data); + } + return 0; +} + +static int vs6624_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + vs6624_write(sd, VS6624_CONTRAST0, ctrl->val); + break; + case V4L2_CID_SATURATION: + vs6624_write(sd, VS6624_SATURATION0, ctrl->val); + break; + case V4L2_CID_HFLIP: + vs6624_write(sd, VS6624_HMIRROR0, ctrl->val); + break; + case V4L2_CID_VFLIP: + vs6624_write(sd, VS6624_VFLIP0, ctrl->val); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vs6624_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(vs6624_formats)) + return -EINVAL; + + *code = vs6624_formats[index].mbus_code; + return 0; +} + +static int vs6624_try_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + int index; + + for (index = 0; index < ARRAY_SIZE(vs6624_formats); index++) + if (vs6624_formats[index].mbus_code == fmt->code) + break; + if (index >= ARRAY_SIZE(vs6624_formats)) { + /* default to first format */ + index = 0; + fmt->code = vs6624_formats[0].mbus_code; + } + + /* sensor mode is VGA */ + if (fmt->width > VGA_WIDTH) + fmt->width = VGA_WIDTH; + if (fmt->height > VGA_HEIGHT) + fmt->height = VGA_HEIGHT; + fmt->width = fmt->width & (~3); + fmt->height = fmt->height & (~3); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = vs6624_formats[index].colorspace; + return 0; +} + +static int vs6624_s_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + int ret; + + ret = vs6624_try_mbus_fmt(sd, fmt); + if (ret) + return ret; + + /* set image format */ + switch (fmt->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x1); + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + vs6624_write(sd, VS6624_IMG_FMT0, 0x0); + vs6624_write(sd, VS6624_YUV_SETUP, 0x3); + break; + case V4L2_MBUS_FMT_RGB565_2X8_LE: + vs6624_write(sd, VS6624_IMG_FMT0, 0x4); + vs6624_write(sd, VS6624_RGB_SETUP, 0x0); + break; + default: + return -EINVAL; + } + + /* set image size */ + if ((fmt->width == VGA_WIDTH) && (fmt->height == VGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x2); + else if ((fmt->width == QVGA_WIDTH) && (fmt->height == QVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x4); + else if ((fmt->width == QQVGA_WIDTH) && (fmt->height == QQVGA_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x6); + else if ((fmt->width == CIF_WIDTH) && (fmt->height == CIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x3); + else if ((fmt->width == QCIF_WIDTH) && (fmt->height == QCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x5); + else if ((fmt->width == QQCIF_WIDTH) && (fmt->height == QQCIF_HEIGHT)) + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x7); + else { + vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x8); + vs6624_write(sd, VS6624_MAN_HSIZE0_MSB, fmt->width >> 8); + vs6624_write(sd, VS6624_MAN_HSIZE0_LSB, fmt->width & 0xFF); + vs6624_write(sd, VS6624_MAN_VSIZE0_MSB, fmt->height >> 8); + vs6624_write(sd, VS6624_MAN_VSIZE0_LSB, fmt->height & 0xFF); + vs6624_write(sd, VS6624_CROP_CTRL0, 0x1); + } + + sensor->fmt = *fmt; + + return 0; +} + +static int vs6624_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct vs6624 *sensor = to_vs6624(sd); + + *fmt = sensor->fmt; + return 0; +} + +static int vs6624_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(*cp)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = sensor->frame_rate.denominator; + cp->timeperframe.denominator = sensor->frame_rate.numerator; + return 0; +} + +static int vs6624_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct vs6624 *sensor = to_vs6624(sd); + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + if (tpf->numerator == 0 || tpf->denominator == 0 + || (tpf->denominator > tpf->numerator * MAX_FRAME_RATE)) { + /* reset to max frame rate */ + tpf->numerator = 1; + tpf->denominator = MAX_FRAME_RATE; + } + sensor->frame_rate.numerator = tpf->denominator; + sensor->frame_rate.denominator = tpf->numerator; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + return 0; +} + +static int vs6624_s_stream(struct v4l2_subdev *sd, int enable) +{ + if (enable) + vs6624_write(sd, VS6624_USER_CMD, 0x2); + else + vs6624_write(sd, VS6624_USER_CMD, 0x4); + udelay(100); + return 0; +} + +static int vs6624_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + int rev; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + rev = (vs6624_read(sd, VS6624_FW_VSN_MAJOR) << 8) + | vs6624_read(sd, VS6624_FW_VSN_MINOR); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VS6624, rev); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vs6624_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->val = vs6624_read(sd, reg->reg & 0xffff); + reg->size = 1; + return 0; +} + +static int vs6624_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + vs6624_write(sd, reg->reg & 0xffff, reg->val & 0xff); + return 0; +} +#endif + +static const struct v4l2_ctrl_ops vs6624_ctrl_ops = { + .s_ctrl = vs6624_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops vs6624_core_ops = { + .g_chip_ident = vs6624_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = vs6624_g_register, + .s_register = vs6624_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops vs6624_video_ops = { + .enum_mbus_fmt = vs6624_enum_mbus_fmt, + .try_mbus_fmt = vs6624_try_mbus_fmt, + .s_mbus_fmt = vs6624_s_mbus_fmt, + .g_mbus_fmt = vs6624_g_mbus_fmt, + .s_parm = vs6624_s_parm, + .g_parm = vs6624_g_parm, + .s_stream = vs6624_s_stream, +}; + +static const struct v4l2_subdev_ops vs6624_ops = { + .core = &vs6624_core_ops, + .video = &vs6624_video_ops, +}; + +static int __devinit vs6624_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vs6624 *sensor; + struct v4l2_subdev *sd; + struct v4l2_ctrl_handler *hdl; + const unsigned *ce; + int ret; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EIO; + + ce = client->dev.platform_data; + if (ce == NULL) + return -EINVAL; + + ret = gpio_request(*ce, "VS6624 Chip Enable"); + if (ret) { + v4l_err(client, "failed to request GPIO %d\n", *ce); + return ret; + } + gpio_direction_output(*ce, 1); + /* wait 100ms before any further i2c writes are performed */ + mdelay(100); + + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL); + if (sensor == NULL) { + gpio_free(*ce); + return -ENOMEM; + } + + sd = &sensor->sd; + v4l2_i2c_subdev_init(sd, client, &vs6624_ops); + + vs6624_writeregs(sd, vs6624_p1); + vs6624_write(sd, VS6624_MICRO_EN, 0x2); + vs6624_write(sd, VS6624_DIO_EN, 0x1); + mdelay(10); + vs6624_writeregs(sd, vs6624_p2); + + vs6624_writeregs(sd, vs6624_default); + vs6624_write(sd, VS6624_HSYNC_SETUP, 0xF); + vs6624_writeregs(sd, vs6624_run_setup); + + /* set frame rate */ + sensor->frame_rate.numerator = MAX_FRAME_RATE; + sensor->frame_rate.denominator = 1; + vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0); + vs6624_write(sd, VS6624_FR_NUM_MSB, + sensor->frame_rate.numerator >> 8); + vs6624_write(sd, VS6624_FR_NUM_LSB, + sensor->frame_rate.numerator & 0xFF); + vs6624_write(sd, VS6624_FR_DEN, + sensor->frame_rate.denominator & 0xFF); + + sensor->fmt = vs6624_default_fmt; + sensor->ce_pin = *ce; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + hdl = &sensor->hdl; + v4l2_ctrl_handler_init(hdl, 4); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x87); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_SATURATION, 0, 0xFF, 1, 0x78); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + /* hook the control handler into the driver */ + sd->ctrl_handler = hdl; + if (hdl->error) { + int err = hdl->error; + + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + return err; + } + + /* initialize the hardware to the default control values */ + ret = v4l2_ctrl_handler_setup(hdl); + if (ret) { + v4l2_ctrl_handler_free(hdl); + kfree(sensor); + gpio_free(*ce); + } + return ret; +} + +static int __devexit vs6624_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vs6624 *sensor = to_vs6624(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + gpio_free(sensor->ce_pin); + kfree(sensor); + return 0; +} + +static const struct i2c_device_id vs6624_id[] = { + {"vs6624", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, vs6624_id); + +static struct i2c_driver vs6624_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "vs6624", + }, + .probe = vs6624_probe, + .remove = __devexit_p(vs6624_remove), + .id_table = vs6624_id, +}; + +static __init int vs6624_init(void) +{ + return i2c_add_driver(&vs6624_driver); +} + +static __exit void vs6624_exit(void) +{ + i2c_del_driver(&vs6624_driver); +} + +module_init(vs6624_init); +module_exit(vs6624_exit); + +MODULE_DESCRIPTION("VS6624 sensor driver"); +MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/vs6624_regs.h b/drivers/media/i2c/vs6624_regs.h new file mode 100644 index 000000000000..6ba2ee25827e --- /dev/null +++ b/drivers/media/i2c/vs6624_regs.h @@ -0,0 +1,337 @@ +/* + * vs6624 - ST VS6624 CMOS image sensor registers + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _VS6624_REGS_H_ +#define _VS6624_REGS_H_ + +/* low level control registers */ +#define VS6624_MICRO_EN 0xC003 /* power enable for all MCU clock */ +#define VS6624_DIO_EN 0xC044 /* enable digital I/O */ +/* device parameters */ +#define VS6624_DEV_ID_MSB 0x0001 /* device id MSB */ +#define VS6624_DEV_ID_LSB 0x0002 /* device id LSB */ +#define VS6624_FW_VSN_MAJOR 0x0004 /* firmware version major */ +#define VS6624_FW_VSN_MINOR 0x0006 /* firmware version minor */ +#define VS6624_PATCH_VSN_MAJOR 0x0008 /* patch version major */ +#define VS6624_PATCH_VSN_MINOR 0x000A /* patch version minor */ +/* host interface manager control */ +#define VS6624_USER_CMD 0x0180 /* user level control of operating states */ +/* host interface manager status */ +#define VS6624_STATE 0x0202 /* current state of the mode manager */ +/* run mode control */ +#define VS6624_METER_ON 0x0280 /* if false AE and AWB are disabled */ +/* mode setup */ +#define VS6624_ACTIVE_PIPE_SETUP 0x0302 /* select the active bank for non view live mode */ +#define VS6624_SENSOR_MODE 0x0308 /* select the different sensor mode */ +/* pipe setup bank0 */ +#define VS6624_IMAGE_SIZE0 0x0380 /* required output dimension */ +#define VS6624_MAN_HSIZE0_MSB 0x0383 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE0_LSB 0x0384 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE0_MSB 0x0387 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE0_LSB 0x0388 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP0_MSB 0x038B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP0_LSB 0x038C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP0_MSB 0x038F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP0_LSB 0x0390 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL0 0x0392 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP0_MSB 0x0395 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP0_LSB 0x0396 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP0_MSB 0x0399 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP0_LSB 0x039A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL0 0x039C /* control pan operation */ +#define VS6624_CROP_CTRL0 0x039E /* select cropping mode */ +#define VS6624_CROP_HSTART0_MSB 0x03A1 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART0_LSB 0x03A2 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE0_MSB 0x03A5 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE0_LSB 0x03A6 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART0_MSB 0x03A9 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART0_LSB 0x03AA /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE0_MSB 0x03AD /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE0_LSB 0x03AE /* set the cropping V size LSB */ +#define VS6624_IMG_FMT0 0x03B0 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN0 0x03B2 /* set bayer output alignment */ +#define VS6624_CONTRAST0 0x03B4 /* contrast control for output */ +#define VS6624_SATURATION0 0x03B6 /* saturation control for output */ +#define VS6624_GAMMA0 0x03B8 /* gamma settings */ +#define VS6624_HMIRROR0 0x03BA /* horizontal image orientation flip */ +#define VS6624_VFLIP0 0x03BC /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID0 0x03BE /* logical DMA channel number */ +/* pipe setup bank1 */ +#define VS6624_IMAGE_SIZE1 0x0400 /* required output dimension */ +#define VS6624_MAN_HSIZE1_MSB 0x0403 /* input required manual H size MSB */ +#define VS6624_MAN_HSIZE1_LSB 0x0404 /* input required manual H size LSB */ +#define VS6624_MAN_VSIZE1_MSB 0x0407 /* input required manual V size MSB */ +#define VS6624_MAN_VSIZE1_LSB 0x0408 /* input required manual V size LSB */ +#define VS6624_ZOOM_HSTEP1_MSB 0x040B /* set the zoom H step MSB */ +#define VS6624_ZOOM_HSTEP1_LSB 0x040C /* set the zoom H step LSB */ +#define VS6624_ZOOM_VSTEP1_MSB 0x040F /* set the zoom V step MSB */ +#define VS6624_ZOOM_VSTEP1_LSB 0x0410 /* set the zoom V step LSB */ +#define VS6624_ZOOM_CTRL1 0x0412 /* control zoon in, out and stop */ +#define VS6624_PAN_HSTEP1_MSB 0x0415 /* set the pan H step MSB */ +#define VS6624_PAN_HSTEP1_LSB 0x0416 /* set the pan H step LSB */ +#define VS6624_PAN_VSTEP1_MSB 0x0419 /* set the pan V step MSB */ +#define VS6624_PAN_VSTEP1_LSB 0x041A /* set the pan V step LSB */ +#define VS6624_PAN_CTRL1 0x041C /* control pan operation */ +#define VS6624_CROP_CTRL1 0x041E /* select cropping mode */ +#define VS6624_CROP_HSTART1_MSB 0x0421 /* set the cropping H start address MSB */ +#define VS6624_CROP_HSTART1_LSB 0x0422 /* set the cropping H start address LSB */ +#define VS6624_CROP_HSIZE1_MSB 0x0425 /* set the cropping H size MSB */ +#define VS6624_CROP_HSIZE1_LSB 0x0426 /* set the cropping H size LSB */ +#define VS6624_CROP_VSTART1_MSB 0x0429 /* set the cropping V start address MSB */ +#define VS6624_CROP_VSTART1_LSB 0x042A /* set the cropping V start address LSB */ +#define VS6624_CROP_VSIZE1_MSB 0x042D /* set the cropping V size MSB */ +#define VS6624_CROP_VSIZE1_LSB 0x042E /* set the cropping V size LSB */ +#define VS6624_IMG_FMT1 0x0430 /* select required output image format */ +#define VS6624_BAYER_OUT_ALIGN1 0x0432 /* set bayer output alignment */ +#define VS6624_CONTRAST1 0x0434 /* contrast control for output */ +#define VS6624_SATURATION1 0x0436 /* saturation control for output */ +#define VS6624_GAMMA1 0x0438 /* gamma settings */ +#define VS6624_HMIRROR1 0x043A /* horizontal image orientation flip */ +#define VS6624_VFLIP1 0x043C /* vertical image orientation flip */ +#define VS6624_CHANNEL_ID1 0x043E /* logical DMA channel number */ +/* view live control */ +#define VS6624_VIEW_LIVE_EN 0x0480 /* enable view live mode */ +#define VS6624_INIT_PIPE_SETUP 0x0482 /* select initial pipe setup bank */ +/* view live status */ +#define VS6624_CUR_PIPE_SETUP 0x0500 /* indicates most recently applied setup bank */ +/* power management */ +#define VS6624_TIME_TO_POWER_DOWN 0x0580 /* automatically transition time to stop mode */ +/* video timing parameter host inputs */ +#define VS6624_EXT_CLK_FREQ_NUM_MSB 0x0605 /* external clock frequency numerator MSB */ +#define VS6624_EXT_CLK_FREQ_NUM_LSB 0x0606 /* external clock frequency numerator LSB */ +#define VS6624_EXT_CLK_FREQ_DEN 0x0608 /* external clock frequency denominator */ +/* video timing control */ +#define VS6624_SYS_CLK_MODE 0x0880 /* decides system clock frequency */ +/* frame dimension parameter host inputs */ +#define VS6624_LIGHT_FREQ 0x0C80 /* AC frequency used for flicker free time */ +#define VS6624_FLICKER_COMPAT 0x0C82 /* flicker compatible frame length */ +/* static frame rate control */ +#define VS6624_FR_NUM_MSB 0x0D81 /* desired frame rate numerator MSB */ +#define VS6624_FR_NUM_LSB 0x0D82 /* desired frame rate numerator LSB */ +#define VS6624_FR_DEN 0x0D84 /* desired frame rate denominator */ +/* automatic frame rate control */ +#define VS6624_DISABLE_FR_DAMPER 0x0E80 /* defines frame rate mode */ +#define VS6624_MIN_DAMPER_OUT_MSB 0x0E8C /* minimum frame rate MSB */ +#define VS6624_MIN_DAMPER_OUT_LSB 0x0E8A /* minimum frame rate LSB */ +/* exposure controls */ +#define VS6624_EXPO_MODE 0x1180 /* exposure mode */ +#define VS6624_EXPO_METER 0x1182 /* weights to be associated with the zones */ +#define VS6624_EXPO_TIME_NUM 0x1184 /* exposure time numerator */ +#define VS6624_EXPO_TIME_DEN 0x1186 /* exposure time denominator */ +#define VS6624_EXPO_TIME_MSB 0x1189 /* exposure time for the Manual Mode MSB */ +#define VS6624_EXPO_TIME_LSB 0x118A /* exposure time for the Manual Mode LSB */ +#define VS6624_EXPO_COMPENSATION 0x1190 /* exposure compensation */ +#define VS6624_DIRECT_COARSE_MSB 0x1195 /* coarse integration lines for Direct Mode MSB */ +#define VS6624_DIRECT_COARSE_LSB 0x1196 /* coarse integration lines for Direct Mode LSB */ +#define VS6624_DIRECT_FINE_MSB 0x1199 /* fine integration pixels for Direct Mode MSB */ +#define VS6624_DIRECT_FINE_LSB 0x119A /* fine integration pixels for Direct Mode LSB */ +#define VS6624_DIRECT_ANAL_GAIN_MSB 0x119D /* analog gain for Direct Mode MSB */ +#define VS6624_DIRECT_ANAL_GAIN_LSB 0x119E /* analog gain for Direct Mode LSB */ +#define VS6624_DIRECT_DIGI_GAIN_MSB 0x11A1 /* digital gain for Direct Mode MSB */ +#define VS6624_DIRECT_DIGI_GAIN_LSB 0x11A2 /* digital gain for Direct Mode LSB */ +#define VS6624_FLASH_COARSE_MSB 0x11A5 /* coarse integration lines for Flash Gun Mode MSB */ +#define VS6624_FLASH_COARSE_LSB 0x11A6 /* coarse integration lines for Flash Gun Mode LSB */ +#define VS6624_FLASH_FINE_MSB 0x11A9 /* fine integration pixels for Flash Gun Mode MSB */ +#define VS6624_FLASH_FINE_LSB 0x11AA /* fine integration pixels for Flash Gun Mode LSB */ +#define VS6624_FLASH_ANAL_GAIN_MSB 0x11AD /* analog gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_ANAL_GAIN_LSB 0x11AE /* analog gain for Flash Gun Mode LSB */ +#define VS6624_FLASH_DIGI_GAIN_MSB 0x11B1 /* digital gain for Flash Gun Mode MSB */ +#define VS6624_FLASH_DIGI_GAIN_LSB 0x11B2 /* digital gain for Flash Gun Mode LSB */ +#define VS6624_FREEZE_AE 0x11B4 /* freeze auto exposure */ +#define VS6624_MAX_INT_TIME_MSB 0x11B7 /* user maximum integration time MSB */ +#define VS6624_MAX_INT_TIME_LSB 0x11B8 /* user maximum integration time LSB */ +#define VS6624_FLASH_AG_THR_MSB 0x11BB /* recommend flash gun analog gain threshold MSB */ +#define VS6624_FLASH_AG_THR_LSB 0x11BC /* recommend flash gun analog gain threshold LSB */ +#define VS6624_ANTI_FLICKER_MODE 0x11C0 /* anti flicker mode */ +/* white balance control */ +#define VS6624_WB_MODE 0x1480 /* set white balance mode */ +#define VS6624_MAN_RG 0x1482 /* user setting for red channel gain */ +#define VS6624_MAN_GG 0x1484 /* user setting for green channel gain */ +#define VS6624_MAN_BG 0x1486 /* user setting for blue channel gain */ +#define VS6624_FLASH_RG_MSB 0x148B /* red gain for Flash Gun MSB */ +#define VS6624_FLASH_RG_LSB 0x148C /* red gain for Flash Gun LSB */ +#define VS6624_FLASH_GG_MSB 0x148F /* green gain for Flash Gun MSB */ +#define VS6624_FLASH_GG_LSB 0x1490 /* green gain for Flash Gun LSB */ +#define VS6624_FLASH_BG_MSB 0x1493 /* blue gain for Flash Gun MSB */ +#define VS6624_FLASH_BG_LSB 0x1494 /* blue gain for Flash Gun LSB */ +/* sensor setup */ +#define VS6624_BC_OFFSET 0x1990 /* Black Correction Offset */ +/* image stability */ +#define VS6624_STABLE_WB 0x1900 /* white balance stable */ +#define VS6624_STABLE_EXPO 0x1902 /* exposure stable */ +#define VS6624_STABLE 0x1906 /* system stable */ +/* flash control */ +#define VS6624_FLASH_MODE 0x1A80 /* flash mode */ +#define VS6624_FLASH_OFF_LINE_MSB 0x1A83 /* off line at flash pulse mode MSB */ +#define VS6624_FLASH_OFF_LINE_LSB 0x1A84 /* off line at flash pulse mode LSB */ +/* flash status */ +#define VS6624_FLASH_RECOM 0x1B00 /* flash gun is recommended */ +#define VS6624_FLASH_GRAB_COMPLETE 0x1B02 /* flash gun image has been grabbed */ +/* scythe filter controls */ +#define VS6624_SCYTHE_FILTER 0x1D80 /* disable scythe defect correction */ +/* jack filter controls */ +#define VS6624_JACK_FILTER 0x1E00 /* disable jack defect correction */ +/* demosaic control */ +#define VS6624_ANTI_ALIAS_FILTER 0x1E80 /* anti alias filter suppress */ +/* color matrix dampers */ +#define VS6624_CM_DISABLE 0x1F00 /* disable color matrix damper */ +#define VS6624_CM_LOW_THR_MSB 0x1F03 /* low threshold for exposure MSB */ +#define VS6624_CM_LOW_THR_LSB 0x1F04 /* low threshold for exposure LSB */ +#define VS6624_CM_HIGH_THR_MSB 0x1F07 /* high threshold for exposure MSB */ +#define VS6624_CM_HIGH_THR_LSB 0x1F08 /* high threshold for exposure LSB */ +#define VS6624_CM_MIN_OUT_MSB 0x1F0B /* minimum possible damper output MSB */ +#define VS6624_CM_MIN_OUT_LSB 0x1F0C /* minimum possible damper output LSB */ +/* peaking control */ +#define VS6624_PEAK_GAIN 0x2000 /* controls peaking gain */ +#define VS6624_PEAK_G_DISABLE 0x2002 /* disable peak gain damping */ +#define VS6624_PEAK_LOW_THR_G_MSB 0x2005 /* low threshold for exposure for gain MSB */ +#define VS6624_PEAK_LOW_THR_G_LSB 0x2006 /* low threshold for exposure for gain LSB */ +#define VS6624_PEAK_HIGH_THR_G_MSB 0x2009 /* high threshold for exposure for gain MSB */ +#define VS6624_PEAK_HIGH_THR_G_LSB 0x200A /* high threshold for exposure for gain LSB */ +#define VS6624_PEAK_MIN_OUT_G_MSB 0x200D /* minimum damper output for gain MSB */ +#define VS6624_PEAK_MIN_OUT_G_LSB 0x200E /* minimum damper output for gain LSB */ +#define VS6624_PEAK_LOW_THR 0x2010 /* adjust degree of coring */ +#define VS6624_PEAK_C_DISABLE 0x2012 /* disable coring damping */ +#define VS6624_PEAK_HIGH_THR 0x2014 /* adjust maximum gain */ +#define VS6624_PEAK_LOW_THR_C_MSB 0x2017 /* low threshold for exposure for coring MSB */ +#define VS6624_PEAK_LOW_THR_C_LSB 0x2018 /* low threshold for exposure for coring LSB */ +#define VS6624_PEAK_HIGH_THR_C_MSB 0x201B /* high threshold for exposure for coring MSB */ +#define VS6624_PEAK_HIGH_THR_C_LSB 0x201C /* high threshold for exposure for coring LSB */ +#define VS6624_PEAK_MIN_OUT_C_MSB 0x201F /* minimum damper output for coring MSB */ +#define VS6624_PEAK_MIN_OUT_C_LSB 0x2020 /* minimum damper output for coring LSB */ +/* pipe 0 RGB to YUV matrix manual control */ +#define VS6624_RYM0_MAN_CTRL 0x2180 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM0_W00_MSB 0x2183 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W00_LSB 0x2184 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W01_MSB 0x2187 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W01_LSB 0x2188 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W02_MSB 0x218C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W02_LSB 0x218D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W10_MSB 0x2190 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W10_LSB 0x218F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W11_MSB 0x2193 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W11_LSB 0x2194 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W12_MSB 0x2197 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W12_LSB 0x2198 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_W20_MSB 0x219B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM0_W20_LSB 0x219C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM0_W21_MSB 0x21A0 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM0_W21_LSB 0x219F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM0_W22_MSB 0x21A3 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM0_W22_LSB 0x21A4 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM0_YINY_MSB 0x21A7 /* Y in Y MSB */ +#define VS6624_RYM0_YINY_LSB 0x21A8 /* Y in Y LSB */ +#define VS6624_RYM0_YINCB_MSB 0x21AB /* Y in Cb MSB */ +#define VS6624_RYM0_YINCB_LSB 0x21AC /* Y in Cb LSB */ +#define VS6624_RYM0_YINCR_MSB 0x21B0 /* Y in Cr MSB */ +#define VS6624_RYM0_YINCR_LSB 0x21AF /* Y in Cr LSB */ +/* pipe 1 RGB to YUV matrix manual control */ +#define VS6624_RYM1_MAN_CTRL 0x2200 /* enable manual RGB to YUV matrix */ +#define VS6624_RYM1_W00_MSB 0x2203 /* row 0 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W00_LSB 0x2204 /* row 0 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W01_MSB 0x2207 /* row 0 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W01_LSB 0x2208 /* row 0 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W02_MSB 0x220C /* row 0 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W02_LSB 0x220D /* row 0 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W10_MSB 0x2210 /* row 1 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W10_LSB 0x220F /* row 1 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W11_MSB 0x2213 /* row 1 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W11_LSB 0x2214 /* row 1 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W12_MSB 0x2217 /* row 1 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W12_LSB 0x2218 /* row 1 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_W20_MSB 0x221B /* row 2 column 0 of YUV matrix MSB */ +#define VS6624_RYM1_W20_LSB 0x221C /* row 2 column 0 of YUV matrix LSB */ +#define VS6624_RYM1_W21_MSB 0x2220 /* row 2 column 1 of YUV matrix MSB */ +#define VS6624_RYM1_W21_LSB 0x221F /* row 2 column 1 of YUV matrix LSB */ +#define VS6624_RYM1_W22_MSB 0x2223 /* row 2 column 2 of YUV matrix MSB */ +#define VS6624_RYM1_W22_LSB 0x2224 /* row 2 column 2 of YUV matrix LSB */ +#define VS6624_RYM1_YINY_MSB 0x2227 /* Y in Y MSB */ +#define VS6624_RYM1_YINY_LSB 0x2228 /* Y in Y LSB */ +#define VS6624_RYM1_YINCB_MSB 0x222B /* Y in Cb MSB */ +#define VS6624_RYM1_YINCB_LSB 0x222C /* Y in Cb LSB */ +#define VS6624_RYM1_YINCR_MSB 0x2220 /* Y in Cr MSB */ +#define VS6624_RYM1_YINCR_LSB 0x222F /* Y in Cr LSB */ +/* pipe 0 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL0 0x2280 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R0 0x2282 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G0 0x2284 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B0 0x2286 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R0 0x2288 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G0 0x228A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B0 0x228C /* unpeaked blue channel gamma value */ +/* pipe 1 gamma manual control */ +#define VS6624_GAMMA_MAN_CTRL1 0x2300 /* enable manual gamma setup */ +#define VS6624_GAMMA_PEAK_R1 0x2302 /* peaked red channel gamma value */ +#define VS6624_GAMMA_PEAK_G1 0x2304 /* peaked green channel gamma value */ +#define VS6624_GAMMA_PEAK_B1 0x2306 /* peaked blue channel gamma value */ +#define VS6624_GAMMA_UNPEAK_R1 0x2308 /* unpeaked red channel gamma value */ +#define VS6624_GAMMA_UNPEAK_G1 0x230A /* unpeaked green channel gamma value */ +#define VS6624_GAMMA_UNPEAK_B1 0x230C /* unpeaked blue channel gamma value */ +/* fade to black */ +#define VS6624_F2B_DISABLE 0x2480 /* disable fade to black */ +#define VS6624_F2B_BLACK_VAL_MSB 0x2483 /* black value MSB */ +#define VS6624_F2B_BLACK_VAL_LSB 0x2484 /* black value LSB */ +#define VS6624_F2B_LOW_THR_MSB 0x2487 /* low threshold for exposure MSB */ +#define VS6624_F2B_LOW_THR_LSB 0x2488 /* low threshold for exposure LSB */ +#define VS6624_F2B_HIGH_THR_MSB 0x248B /* high threshold for exposure MSB */ +#define VS6624_F2B_HIGH_THR_LSB 0x248C /* high threshold for exposure LSB */ +#define VS6624_F2B_MIN_OUT_MSB 0x248F /* minimum damper output MSB */ +#define VS6624_F2B_MIN_OUT_LSB 0x2490 /* minimum damper output LSB */ +/* output formatter control */ +#define VS6624_CODE_CK_EN 0x2580 /* code check enable */ +#define VS6624_BLANK_FMT 0x2582 /* blank format */ +#define VS6624_SYNC_CODE_SETUP 0x2584 /* sync code setup */ +#define VS6624_HSYNC_SETUP 0x2586 /* H sync setup */ +#define VS6624_VSYNC_SETUP 0x2588 /* V sync setup */ +#define VS6624_PCLK_SETUP 0x258A /* PCLK setup */ +#define VS6624_PCLK_EN 0x258C /* PCLK enable */ +#define VS6624_OPF_SP_SETUP 0x258E /* output formatter sp setup */ +#define VS6624_BLANK_DATA_MSB 0x2590 /* blank data MSB */ +#define VS6624_BLANK_DATA_LSB 0x2592 /* blank data LSB */ +#define VS6624_RGB_SETUP 0x2594 /* RGB setup */ +#define VS6624_YUV_SETUP 0x2596 /* YUV setup */ +#define VS6624_VSYNC_RIS_COARSE_H 0x2598 /* V sync rising coarse high */ +#define VS6624_VSYNC_RIS_COARSE_L 0x259A /* V sync rising coarse low */ +#define VS6624_VSYNC_RIS_FINE_H 0x259C /* V sync rising fine high */ +#define VS6624_VSYNC_RIS_FINE_L 0x259E /* V sync rising fine low */ +#define VS6624_VSYNC_FALL_COARSE_H 0x25A0 /* V sync falling coarse high */ +#define VS6624_VSYNC_FALL_COARSE_L 0x25A2 /* V sync falling coarse low */ +#define VS6624_VSYNC_FALL_FINE_H 0x25A4 /* V sync falling fine high */ +#define VS6624_VSYNC_FALL_FINE_L 0x25A6 /* V sync falling fine low */ +#define VS6624_HSYNC_RIS_H 0x25A8 /* H sync rising high */ +#define VS6624_HSYNC_RIS_L 0x25AA /* H sync rising low */ +#define VS6624_HSYNC_FALL_H 0x25AC /* H sync falling high */ +#define VS6624_HSYNC_FALL_L 0x25AE /* H sync falling low */ +#define VS6624_OUT_IF 0x25B0 /* output interface */ +#define VS6624_CCP_EXT_DATA 0x25B2 /* CCP extra data */ +/* NoRA controls */ +#define VS6624_NORA_DISABLE 0x2600 /* NoRA control mode */ +#define VS6624_NORA_USAGE 0x2602 /* usage */ +#define VS6624_NORA_SPLIT_KN 0x2604 /* split kn */ +#define VS6624_NORA_SPLIT_NI 0x2606 /* split ni */ +#define VS6624_NORA_TIGHT_G 0x2608 /* tight green */ +#define VS6624_NORA_DISABLE_NP 0x260A /* disable noro promoting */ +#define VS6624_NORA_LOW_THR_MSB 0x260D /* low threshold for exposure MSB */ +#define VS6624_NORA_LOW_THR_LSB 0x260E /* low threshold for exposure LSB */ +#define VS6624_NORA_HIGH_THR_MSB 0x2611 /* high threshold for exposure MSB */ +#define VS6624_NORA_HIGH_THR_LSB 0x2612 /* high threshold for exposure LSB */ +#define VS6624_NORA_MIN_OUT_MSB 0x2615 /* minimum damper output MSB */ +#define VS6624_NORA_MIN_OUT_LSB 0x2616 /* minimum damper output LSB */ + +#endif diff --git a/drivers/media/i2c/wm8739.c b/drivers/media/i2c/wm8739.c new file mode 100644 index 000000000000..3bb99e93febe --- /dev/null +++ b/drivers/media/i2c/wm8739.c @@ -0,0 +1,294 @@ +/* + * wm8739 + * + * Copyright (C) 2005 T. Adachi <tadachi@tadachi-net.com> + * + * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> + * - Cleanup + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> + +MODULE_DESCRIPTION("wm8739 driver"); +MODULE_AUTHOR("T. Adachi, Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; + +module_param(debug, int, 0644); + +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ------------------------------------------------------------------------ */ + +enum { + R0 = 0, R1, + R5 = 5, R6, R7, R8, R9, R15 = 15, + TOT_REGS +}; + +struct wm8739_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct { + /* audio cluster */ + struct v4l2_ctrl *volume; + struct v4l2_ctrl *mute; + struct v4l2_ctrl *balance; + }; + u32 clock_freq; +}; + +static inline struct wm8739_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct wm8739_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct wm8739_state, hdl)->sd; +} + +/* ------------------------------------------------------------------------ */ + +static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + if (reg < 0 || reg >= TOT_REGS) { + v4l2_err(sd, "Invalid register R%d\n", reg); + return -1; + } + + v4l2_dbg(1, debug, sd, "write: %02x %02x\n", reg, val); + + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) + return 0; + v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static int wm8739_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct wm8739_state *state = to_state(sd); + unsigned int work_l, work_r; + u8 vol_l; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */ + u8 vol_r; /* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */ + u16 mute; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + break; + + default: + return -EINVAL; + } + + /* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */ + work_l = (min(65536 - state->balance->val, 32768) * state->volume->val) / 32768; + work_r = (min(state->balance->val, 32768) * state->volume->val) / 32768; + + vol_l = (long)work_l * 31 / 65535; + vol_r = (long)work_r * 31 / 65535; + + /* set audio volume etc. */ + mute = state->mute->val ? 0x80 : 0; + + /* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB + * Default setting: 0x17 = 0 dB + */ + wm8739_write(sd, R0, (vol_l & 0x1f) | mute); + wm8739_write(sd, R1, (vol_r & 0x1f) | mute); + return 0; +} + +/* ------------------------------------------------------------------------ */ + +static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq) +{ + struct wm8739_state *state = to_state(sd); + + state->clock_freq = audiofreq; + /* de-activate */ + wm8739_write(sd, R9, 0x000); + switch (audiofreq) { + case 44100: + /* 256fps, fs=44.1k */ + wm8739_write(sd, R8, 0x020); + break; + case 48000: + /* 256fps, fs=48k */ + wm8739_write(sd, R8, 0x000); + break; + case 32000: + /* 256fps, fs=32k */ + wm8739_write(sd, R8, 0x018); + break; + default: + break; + } + /* activate */ + wm8739_write(sd, R9, 0x001); + return 0; +} + +static int wm8739_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8739, 0); +} + +static int wm8739_log_status(struct v4l2_subdev *sd) +{ + struct wm8739_state *state = to_state(sd); + + v4l2_info(sd, "Frequency: %u Hz\n", state->clock_freq); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops wm8739_ctrl_ops = { + .s_ctrl = wm8739_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops wm8739_core_ops = { + .log_status = wm8739_log_status, + .g_chip_ident = wm8739_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_audio_ops wm8739_audio_ops = { + .s_clock_freq = wm8739_s_clock_freq, +}; + +static const struct v4l2_subdev_ops wm8739_ops = { + .core = &wm8739_core_ops, + .audio = &wm8739_audio_ops, +}; + +/* ------------------------------------------------------------------------ */ + +/* i2c implementation */ + +static int wm8739_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wm8739_state *state; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct wm8739_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &wm8739_ops); + v4l2_ctrl_handler_init(&state->hdl, 2); + state->volume = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 50736); + state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + state->balance = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_cluster(3, &state->volume); + + state->clock_freq = 48000; + + /* Initialize wm8739 */ + + /* reset */ + wm8739_write(sd, R15, 0x00); + /* filter setting, high path, offet clear */ + wm8739_write(sd, R5, 0x000); + /* ADC, OSC, Power Off mode Disable */ + wm8739_write(sd, R6, 0x000); + /* Digital Audio interface format: + Enable Master mode, 24 bit, MSB first/left justified */ + wm8739_write(sd, R7, 0x049); + /* sampling control: normal, 256fs, 48KHz sampling rate */ + wm8739_write(sd, R8, 0x000); + /* activate */ + wm8739_write(sd, R9, 0x001); + /* set volume/mute */ + v4l2_ctrl_handler_setup(&state->hdl); + return 0; +} + +static int wm8739_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct wm8739_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(to_state(sd)); + return 0; +} + +static const struct i2c_device_id wm8739_id[] = { + { "wm8739", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8739_id); + +static struct i2c_driver wm8739_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "wm8739", + }, + .probe = wm8739_probe, + .remove = wm8739_remove, + .id_table = wm8739_id, +}; + +module_i2c_driver(wm8739_driver); diff --git a/drivers/media/i2c/wm8775.c b/drivers/media/i2c/wm8775.c new file mode 100644 index 000000000000..bee77ea9f49e --- /dev/null +++ b/drivers/media/i2c/wm8775.c @@ -0,0 +1,342 @@ +/* + * wm8775 - driver version 0.0.1 + * + * Copyright (C) 2004 Ulf Eklund <ivtv at eklund.to> + * + * Based on saa7115 driver + * + * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> + * - Cleanup + * - V4L2 API update + * - sound fixes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> +#include <media/wm8775.h> + +MODULE_DESCRIPTION("wm8775 driver"); +MODULE_AUTHOR("Ulf Eklund, Hans Verkuil"); +MODULE_LICENSE("GPL"); + + + +/* ----------------------------------------------------------------------- */ + +enum { + R7 = 7, R11 = 11, + R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R23 = 23, + TOT_REGS +}; + +#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */ +#define ALC_EN 0x100 /* R17: ALC enable */ + +struct wm8775_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl *mute; + struct v4l2_ctrl *vol; + struct v4l2_ctrl *bal; + struct v4l2_ctrl *loud; + u8 input; /* Last selected input (0-0xf) */ +}; + +static inline struct wm8775_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct wm8775_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct wm8775_state, hdl)->sd; +} + +static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int i; + + if (reg < 0 || reg >= TOT_REGS) { + v4l2_err(sd, "Invalid register R%d\n", reg); + return -1; + } + + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) + return 0; + v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly) +{ + struct wm8775_state *state = to_state(sd); + u8 vol_l, vol_r; + int muted = 0 != state->mute->val; + u16 volume = (u16)state->vol->val; + u16 balance = (u16)state->bal->val; + + /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */ + vol_l = (min(65536 - balance, 32768) * volume) >> 23; + vol_r = (min(balance, (u16)32768) * volume) >> 23; + + /* Mute */ + if (muted || quietly) + wm8775_write(sd, R21, 0x0c0 | state->input); + + wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */ + wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */ + + /* Un-mute */ + if (!muted) + wm8775_write(sd, R21, state->input); +} + +static int wm8775_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + struct wm8775_state *state = to_state(sd); + + /* There are 4 inputs and one output. Zero or more inputs + are multiplexed together to the output. Hence there are + 16 combinations. + If only one input is active (the normal case) then the + input values 1, 2, 4 or 8 should be used. */ + if (input > 15) { + v4l2_err(sd, "Invalid input %d.\n", input); + return -EINVAL; + } + state->input = input; + if (!v4l2_ctrl_g_ctrl(state->mute)) + return 0; + if (!v4l2_ctrl_g_ctrl(state->vol)) + return 0; + if (!v4l2_ctrl_g_ctrl(state->bal)) + return 0; + wm8775_set_audio(sd, 1); + return 0; +} + +static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BALANCE: + wm8775_set_audio(sd, 0); + return 0; + case V4L2_CID_AUDIO_LOUDNESS: + wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD); + return 0; + } + return -EINVAL; +} + +static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8775, 0); +} + +static int wm8775_log_status(struct v4l2_subdev *sd) +{ + struct wm8775_state *state = to_state(sd); + + v4l2_info(sd, "Input: %d\n", state->input); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); + return 0; +} + +static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) +{ + wm8775_set_audio(sd, 0); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_ctrl_ops wm8775_ctrl_ops = { + .s_ctrl = wm8775_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops wm8775_core_ops = { + .log_status = wm8775_log_status, + .g_chip_ident = wm8775_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, +}; + +static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = { + .s_frequency = wm8775_s_frequency, +}; + +static const struct v4l2_subdev_audio_ops wm8775_audio_ops = { + .s_routing = wm8775_s_routing, +}; + +static const struct v4l2_subdev_ops wm8775_ops = { + .core = &wm8775_core_ops, + .tuner = &wm8775_tuner_ops, + .audio = &wm8775_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static int wm8775_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wm8775_state *state; + struct v4l2_subdev *sd; + int err; + bool is_nova_s = false; + + if (client->dev.platform_data) { + struct wm8775_platform_data *data = client->dev.platform_data; + is_nova_s = data->is_nova_s; + } + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + state = kzalloc(sizeof(struct wm8775_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + sd = &state->sd; + v4l2_i2c_subdev_init(sd, client, &wm8775_ops); + state->input = 2; + + v4l2_ctrl_handler_init(&state->hdl, 4); + state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/ + state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768); + state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1); + sd->ctrl_handler = &state->hdl; + err = state->hdl.error; + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + + /* Initialize wm8775 */ + + /* RESET */ + wm8775_write(sd, R23, 0x000); + /* Disable zero cross detect timeout */ + wm8775_write(sd, R7, 0x000); + /* HPF enable, left justified, 24-bit (Philips) mode */ + wm8775_write(sd, R11, 0x021); + /* Master mode, clock ratio 256fs */ + wm8775_write(sd, R12, 0x102); + /* Powered up */ + wm8775_write(sd, R13, 0x000); + + if (!is_nova_s) { + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R14, 0x1d4); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R15, 0x1d4); + /* ALC Stereo, ALC target level -1dB FS max gain +8dB */ + wm8775_write(sd, R16, 0x1bf); + /* Enable gain control, use zero cross detection, + ALC hold time 42.6 ms */ + wm8775_write(sd, R17, 0x185); + } else { + /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */ + wm8775_write(sd, R16, 0x1bb); + /* Set ALC mode and hold time */ + wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD); + } + /* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */ + wm8775_write(sd, R18, 0x0a2); + /* Enable noise gate, threshold -72dBfs */ + wm8775_write(sd, R19, 0x005); + if (!is_nova_s) { + /* Transient window 4ms, lower PGA gain limit -1dB */ + wm8775_write(sd, R20, 0x07a); + /* LRBOTH = 1, use input 2. */ + wm8775_write(sd, R21, 0x102); + } else { + /* Transient window 4ms, ALC min gain -5dB */ + wm8775_write(sd, R20, 0x0fb); + + wm8775_set_audio(sd, 1); /* set volume/mute/mux */ + } + return 0; +} + +static int wm8775_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct wm8775_state *state = to_state(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return 0; +} + +static const struct i2c_device_id wm8775_id[] = { + { "wm8775", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8775_id); + +static struct i2c_driver wm8775_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "wm8775", + }, + .probe = wm8775_probe, + .remove = wm8775_remove, + .id_table = wm8775_id, +}; + +module_i2c_driver(wm8775_driver); |
