1 files changed, 0 insertions, 66 deletions
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
deleted file mode 100644
index d615d7d055a2..000000000000
--- a/drivers/media/dvb/frontends/drxk.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _DRXK_H_
-#define _DRXK_H_
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/**
- * struct drxk_config - Configure the initial parameters for DRX-K
- *
- * @adr:		I2C Address of the DRX-K
- * @parallel_ts:	True means that the device uses parallel TS,
- * 			Serial otherwise.
- * @dynamic_clk:	True means that the clock will be dynamically
- *			adjusted. Static clock otherwise.
- * @enable_merr_cfg:	Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG.
- * @single_master:	Device is on the single master mode
- * @no_i2c_bridge:	Don't switch the I2C bridge to talk with tuner
- * @antenna_gpio:	GPIO bit used to control the antenna
- * @antenna_dvbt:	GPIO bit for changing antenna to DVB-C. A value of 1
- *			means that 1=DVBC, 0 = DVBT. Zero means the opposite.
- * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
- * @microcode_name:	Name of the firmware file with the microcode
- * @qam_demod_parameter_count:	The number of parameters used for the command
- *				to set the demodulator parameters. All
- *				firmwares are using the 2-parameter commmand.
- *				An exception is the "drxk_a3.mc" firmware,
- *				which uses the 4-parameter command.
- *				A value of 0 (default) or lower indicates that
- *				the correct number of parameters will be
- *				automatically detected.
- *
- * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
- * UIO-3.
- */
-struct drxk_config {
-	u8	adr;
-	bool	single_master;
-	bool	no_i2c_bridge;
-	bool	parallel_ts;
-	bool	dynamic_clk;
-	bool	enable_merr_cfg;
-
-	bool	antenna_dvbt;
-	u16	antenna_gpio;
-
-	u8	mpeg_out_clk_strength;
-	int	chunk_size;
-
-	const char	*microcode_name;
-	int		 qam_demod_parameter_count;
-};
-
-#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \
-        && defined(MODULE))
-extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
-					struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
-					struct i2c_adapter *i2c)
-{
-        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-        return NULL;
-}
-#endif
-
-#endif