summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/dvb-usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig12
-rw-r--r--drivers/media/dvb/dvb-usb/Makefile3
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.c351
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.h1
-rw-r--r--drivers/media/dvb/dvb-usb/az6027.c1151
-rw-r--r--drivers/media/dvb/dvb-usb/az6027.h14
-rw-r--r--drivers/media/dvb/dvb-usb/cxusb.c3
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700.h1
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_core.c197
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_devices.c160
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-ids.h9
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-init.c2
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-remote.c1
-rw-r--r--drivers/media/dvb/dvb-usb/dw2102.c95
-rw-r--r--drivers/media/dvb/dvb-usb/friio-fe.c2
-rw-r--r--drivers/media/dvb/dvb-usb/m920x.c141
-rw-r--r--drivers/media/dvb/dvb-usb/m920x.h2
-rw-r--r--drivers/media/dvb/dvb-usb/opera1.c2
18 files changed, 1808 insertions, 339 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 1b249897c9fb..e5f91f16ffa4 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -112,11 +112,13 @@ config DVB_USB_CXUSB
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
- select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
+ select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+ select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
@@ -334,3 +336,11 @@ config DVB_USB_EC168
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
+
+config DVB_USB_AZ6027
+ tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
+ depends on DVB_USB
+ select DVB_STB0899 if !DVB_FE_CUSTOMISE
+ select DVB_STB6100 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the AZ6027 device
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 72c92cb69a22..1a192453b0e7 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -85,6 +85,9 @@ obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
dvb-usb-ec168-objs = ec168.o
obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
+dvb-usb-az6027-objs = az6027.o
+obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 8b60a601fb82..d7975383d31b 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -21,6 +21,8 @@
*
*/
+#include <linux/hash.h>
+
#include "af9015.h"
#include "af9013.h"
#include "mt2060.h"
@@ -553,26 +555,45 @@ exit:
return ret;
}
-/* dump eeprom */
-static int af9015_eeprom_dump(struct dvb_usb_device *d)
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct usb_device *udev)
{
- u8 reg, val;
+ static const unsigned int eeprom_size = 256;
+ unsigned int reg;
+ int ret;
+ u8 val, *eeprom;
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
- for (reg = 0; ; reg++) {
- if (reg % 16 == 0) {
- if (reg)
- deb_info(KERN_CONT "\n");
- deb_info(KERN_DEBUG "%02x:", reg);
- }
- if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0)
- deb_info(KERN_CONT " %02x", val);
- else
- deb_info(KERN_CONT " --");
- if (reg == 0xff)
- break;
+ eeprom = kmalloc(eeprom_size, GFP_KERNEL);
+ if (eeprom == NULL)
+ return -ENOMEM;
+
+ for (reg = 0; reg < eeprom_size; reg++) {
+ req.addr = reg;
+ ret = af9015_rw_udev(udev, &req);
+ if (ret)
+ goto free;
+ eeprom[reg] = val;
}
- deb_info(KERN_CONT "\n");
- return 0;
+
+ if (dvb_usb_af9015_debug & 0x01)
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
+ eeprom_size);
+
+ BUG_ON(eeprom_size % 4);
+
+ af9015_config.eeprom_sum = 0;
+ for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
+ af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+ af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
+ }
+
+ deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
+
+ ret = 0;
+free:
+ kfree(eeprom);
+ return ret;
}
static int af9015_download_ir_table(struct dvb_usb_device *d)
@@ -711,12 +732,132 @@ error:
return ret;
}
+struct af9015_setup {
+ unsigned int id;
+ struct dvb_usb_rc_key *rc_key_map;
+ unsigned int rc_key_map_size;
+ u8 *ir_table;
+ unsigned int ir_table_size;
+};
+
+static const struct af9015_setup *af9015_setup_match(unsigned int id,
+ const struct af9015_setup *table)
+{
+ for (; table->rc_key_map; table++)
+ if (table->id == id)
+ return table;
+ return NULL;
+}
+
+static const struct af9015_setup af9015_setup_modparam[] = {
+ { AF9015_REMOTE_A_LINK_DTU_M,
+ af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+ af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+ { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+ af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+ { AF9015_REMOTE_MYGICTV_U718,
+ af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+ af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+ { AF9015_REMOTE_DIGITTRADE_DVB_T,
+ af9015_rc_keys_digittrade, ARRAY_SIZE(af9015_rc_keys_digittrade),
+ af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
+ { AF9015_REMOTE_AVERMEDIA_KS,
+ af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+ af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
+ { }
+};
+
+/* don't add new entries here anymore, use hashes instead */
+static const struct af9015_setup af9015_setup_usbids[] = {
+ { USB_VID_LEADTEK,
+ af9015_rc_keys_leadtek, ARRAY_SIZE(af9015_rc_keys_leadtek),
+ af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
+ { USB_VID_VISIONPLUS,
+ af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+ af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
+ { USB_VID_KWORLD_2, /* TODO: use correct rc keys */
+ af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+ af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
+ { USB_VID_AVERMEDIA,
+ af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+ af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
+ { USB_VID_MSI_2,
+ af9015_rc_keys_msi_digivox_iii, ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii),
+ af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
+ { }
+};
+
+static const struct af9015_setup af9015_setup_hashes[] = {
+ { 0xb8feb708,
+ af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+ af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+ { 0xa3703d00,
+ af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+ af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+ { 0x9b7dc64e,
+ af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+ af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+ { }
+};
+
+static void af9015_set_remote_config(struct usb_device *udev,
+ struct dvb_usb_device_properties *props)
+{
+ const struct af9015_setup *table = NULL;
+
+ if (dvb_usb_af9015_remote) {
+ /* load remote defined as module param */
+ table = af9015_setup_match(dvb_usb_af9015_remote,
+ af9015_setup_modparam);
+ } else {
+ u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
+
+ table = af9015_setup_match(af9015_config.eeprom_sum,
+ af9015_setup_hashes);
+
+ if (!table && vendor == USB_VID_AFATECH) {
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used.
+ DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
+ */
+ char manufacturer[10];
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ table = af9015_setup_match(
+ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_setup_modparam);
+ } else if (udev->descriptor.idProduct ==
+ cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+ table = &(const struct af9015_setup){ 0,
+ af9015_rc_keys_trekstor,
+ ARRAY_SIZE(af9015_rc_keys_trekstor),
+ af9015_ir_table_trekstor,
+ ARRAY_SIZE(af9015_ir_table_trekstor)
+ };
+ }
+ } else if (!table)
+ table = af9015_setup_match(vendor, af9015_setup_usbids);
+ }
+
+ if (table) {
+ props->rc_key_map = table->rc_key_map;
+ props->rc_key_map_size = table->rc_key_map_size;
+ af9015_config.ir_table = table->ir_table;
+ af9015_config.ir_table_size = table->ir_table_size;
+ }
+}
+
static int af9015_read_config(struct usb_device *udev)
{
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
- char manufacturer[10];
/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
@@ -728,158 +869,18 @@ static int af9015_read_config(struct usb_device *udev)
}
if (ret)
goto error;
+
+ ret = af9015_eeprom_hash(udev);
+ if (ret)
+ goto error;
+
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
- } else if (dvb_usb_af9015_remote) {
- /* load remote defined as module param */
- switch (dvb_usb_af9015_remote) {
- case AF9015_REMOTE_A_LINK_DTU_M:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_a_link;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_a_link);
- af9015_config.ir_table = af9015_ir_table_a_link;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_a_link);
- break;
- case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi);
- af9015_config.ir_table = af9015_ir_table_msi;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi);
- break;
- case AF9015_REMOTE_MYGICTV_U718:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_mygictv;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_mygictv);
- af9015_config.ir_table =
- af9015_ir_table_mygictv;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_mygictv);
- break;
- case AF9015_REMOTE_DIGITTRADE_DVB_T:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_digittrade;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_digittrade);
- af9015_config.ir_table =
- af9015_ir_table_digittrade;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_digittrade);
- break;
- case AF9015_REMOTE_AVERMEDIA_KS:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_avermedia;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_avermedia);
- af9015_config.ir_table =
- af9015_ir_table_avermedia_ks;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_avermedia_ks);
- break;
- }
- } else {
- switch (le16_to_cpu(udev->descriptor.idVendor)) {
- case USB_VID_LEADTEK:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_leadtek;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_leadtek);
- af9015_config.ir_table =
- af9015_ir_table_leadtek;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_leadtek);
- break;
- case USB_VID_VISIONPLUS:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_twinhan;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_twinhan);
- af9015_config.ir_table =
- af9015_ir_table_twinhan;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_twinhan);
- break;
- case USB_VID_KWORLD_2:
- /* TODO: use correct rc keys */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_twinhan;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_twinhan);
- af9015_config.ir_table = af9015_ir_table_kworld;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_kworld);
- break;
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used. */
- case USB_VID_AFATECH:
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("Geniatech", manufacturer)) {
- /* iManufacturer 1 Geniatech
- iProduct 2 AF9015 */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_mygictv;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_mygictv);
- af9015_config.ir_table =
- af9015_ir_table_mygictv;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_mygictv);
- } else if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi);
- af9015_config.ir_table =
- af9015_ir_table_msi;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi);
- } else if (udev->descriptor.idProduct ==
- cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_trekstor;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_trekstor);
- af9015_config.ir_table =
- af9015_ir_table_trekstor;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_trekstor);
- }
- break;
- case USB_VID_AVERMEDIA:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_avermedia;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_avermedia);
- af9015_config.ir_table =
- af9015_ir_table_avermedia;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_avermedia);
- break;
- case USB_VID_MSI_2:
- af9015_properties[i].rc_key_map =
- af9015_rc_keys_msi_digivox_iii;
- af9015_properties[i].rc_key_map_size =
- ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii);
- af9015_config.ir_table =
- af9015_ir_table_msi_digivox_iii;
- af9015_config.ir_table_size =
- ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
- break;
- }
- }
+ } else
+ af9015_set_remote_config(udev, &af9015_properties[i]);
}
/* TS mode - one or two receivers */
@@ -1001,6 +1002,9 @@ static int af9015_read_config(struct usb_device *udev)
af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
af9015_af9013_config[i].rf_spec_inv = 1;
break;
+ case AF9013_TUNER_TDA18218:
+ warn("tuner NXP TDA18218 not supported yet");
+ return -ENODEV;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
@@ -1125,11 +1129,6 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
deb_info("%s: init I2C\n", __func__);
ret = af9015_i2c_init(adap->dev);
-
- /* dump eeprom (debug) */
- ret = af9015_eeprom_dump(adap->dev);
- if (ret)
- return ret;
} else {
/* select I2C adapter */
i2c_adap = &state->i2c_adap;
@@ -1295,6 +1294,8 @@ static struct usb_device_id af9015_usb_table[] = {
/* 25 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)},
+ {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1381,7 +1382,8 @@ static struct dvb_usb_device_properties af9015_properties[] = {
},
{
.name = "DigitalNow TinyTwin DVB-T Receiver",
- .cold_ids = {&af9015_usb_table[5], NULL},
+ .cold_ids = {&af9015_usb_table[5],
+ &af9015_usb_table[28], NULL},
.warm_ids = {NULL},
},
{
@@ -1566,7 +1568,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 6, /* max 9 */
+ .num_device_descs = 7, /* max 9 */
.devices = {
{
.name = "AverMedia AVerTV Volar GPS 805 (A805)",
@@ -1600,6 +1602,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.cold_ids = {&af9015_usb_table[27], NULL},
.warm_ids = {NULL},
},
+ {
+ .name = "Leadtek WinFast DTV2000DS",
+ .cold_ids = {&af9015_usb_table[29], NULL},
+ .warm_ids = {NULL},
+ },
}
},
};
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index 931c8515830d..ef36b1831490 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -107,6 +107,7 @@ struct af9015_config {
u16 mt2060_if1[2];
u16 firmware_size;
u16 firmware_checksum;
+ u32 eeprom_sum;
u8 *ir_table;
u16 ir_table_size;
};
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
new file mode 100644
index 000000000000..d7290b2c0913
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -0,0 +1,1151 @@
+/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)
+ * receiver.
+ *
+ * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "az6027.h"
+
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+#include "dvb_ca_en50221.h"
+
+int dvb_usb_az6027_debug;
+module_param_named(debug, dvb_usb_az6027_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct az6027_device_state {
+ struct dvb_ca_en50221 ca;
+ struct mutex ca_mutex;
+ u8 power_state;
+};
+
+static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
+
+ /* 0x0000000b, SYSREG */
+ { STB0899_DEV_ID , 0x30 },
+ { STB0899_DISCNTRL1 , 0x32 },
+ { STB0899_DISCNTRL2 , 0x80 },
+ { STB0899_DISRX_ST0 , 0x04 },
+ { STB0899_DISRX_ST1 , 0x00 },
+ { STB0899_DISPARITY , 0x00 },
+ { STB0899_DISFIFO , 0x00 },
+ { STB0899_DISSTATUS , 0x20 },
+ { STB0899_DISF22 , 0x99 },
+ { STB0899_DISF22RX , 0xa8 },
+ /* SYSREG ? */
+ { STB0899_ACRPRESC , 0x11 },
+ { STB0899_ACRDIV1 , 0x0a },
+ { STB0899_ACRDIV2 , 0x05 },
+ { STB0899_DACR1 , 0x00 },
+ { STB0899_DACR2 , 0x00 },
+ { STB0899_OUTCFG , 0x00 },
+ { STB0899_MODECFG , 0x00 },
+ { STB0899_IRQSTATUS_3 , 0xfe },
+ { STB0899_IRQSTATUS_2 , 0x03 },
+ { STB0899_IRQSTATUS_1 , 0x7c },
+ { STB0899_IRQSTATUS_0 , 0xf4 },
+ { STB0899_IRQMSK_3 , 0xf3 },
+ { STB0899_IRQMSK_2 , 0xfc },
+ { STB0899_IRQMSK_1 , 0xff },
+ { STB0899_IRQMSK_0 , 0xff },
+ { STB0899_IRQCFG , 0x00 },
+ { STB0899_I2CCFG , 0x88 },
+ { STB0899_I2CRPT , 0x58 },
+ { STB0899_IOPVALUE5 , 0x00 },
+ { STB0899_IOPVALUE4 , 0x33 },
+ { STB0899_IOPVALUE3 , 0x6d },
+ { STB0899_IOPVALUE2 , 0x90 },
+ { STB0899_IOPVALUE1 , 0x60 },
+ { STB0899_IOPVALUE0 , 0x00 },
+ { STB0899_GPIO00CFG , 0x82 },
+ { STB0899_GPIO01CFG , 0x82 },
+ { STB0899_GPIO02CFG , 0x82 },
+ { STB0899_GPIO03CFG , 0x82 },
+ { STB0899_GPIO04CFG , 0x82 },
+ { STB0899_GPIO05CFG , 0x82 },
+ { STB0899_GPIO06CFG , 0x82 },
+ { STB0899_GPIO07CFG , 0x82 },
+ { STB0899_GPIO08CFG , 0x82 },
+ { STB0899_GPIO09CFG , 0x82 },
+ { STB0899_GPIO10CFG , 0x82 },
+ { STB0899_GPIO11CFG , 0x82 },
+ { STB0899_GPIO12CFG , 0x82 },
+ { STB0899_GPIO13CFG , 0x82 },
+ { STB0899_GPIO14CFG , 0x82 },
+ { STB0899_GPIO15CFG , 0x82 },
+ { STB0899_GPIO16CFG , 0x82 },
+ { STB0899_GPIO17CFG , 0x82 },
+ { STB0899_GPIO18CFG , 0x82 },
+ { STB0899_GPIO19CFG , 0x82 },
+ { STB0899_GPIO20CFG , 0x82 },
+ { STB0899_SDATCFG , 0xb8 },
+ { STB0899_SCLTCFG , 0xba },
+ { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */
+ { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */
+ { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */
+ { STB0899_DIRCLKCFG , 0x82 },
+ { STB0899_CLKOUT27CFG , 0x7e },
+ { STB0899_STDBYCFG , 0x82 },
+ { STB0899_CS0CFG , 0x82 },
+ { STB0899_CS1CFG , 0x82 },
+ { STB0899_DISEQCOCFG , 0x20 },
+ { STB0899_GPIO32CFG , 0x82 },
+ { STB0899_GPIO33CFG , 0x82 },
+ { STB0899_GPIO34CFG , 0x82 },
+ { STB0899_GPIO35CFG , 0x82 },
+ { STB0899_GPIO36CFG , 0x82 },
+ { STB0899_GPIO37CFG , 0x82 },
+ { STB0899_GPIO38CFG , 0x82 },
+ { STB0899_GPIO39CFG , 0x82 },
+ { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+ { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+ { STB0899_FILTCTRL , 0x00 },
+ { STB0899_SYSCTRL , 0x01 },
+ { STB0899_STOPCLK1 , 0x20 },
+ { STB0899_STOPCLK2 , 0x00 },
+ { STB0899_INTBUFSTATUS , 0x00 },
+ { STB0899_INTBUFCTRL , 0x0a },
+ { 0xffff , 0xff },
+};
+
+static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = {
+ { STB0899_DEMOD , 0x00 },
+ { STB0899_RCOMPC , 0xc9 },
+ { STB0899_AGC1CN , 0x01 },
+ { STB0899_AGC1REF , 0x10 },
+ { STB0899_RTC , 0x23 },
+ { STB0899_TMGCFG , 0x4e },
+ { STB0899_AGC2REF , 0x34 },
+ { STB0899_TLSR , 0x84 },
+ { STB0899_CFD , 0xf7 },
+ { STB0899_ACLC , 0x87 },
+ { STB0899_BCLC , 0x94 },
+ { STB0899_EQON , 0x41 },
+ { STB0899_LDT , 0xf1 },
+ { STB0899_LDT2 , 0xe3 },
+ { STB0899_EQUALREF , 0xb4 },
+ { STB0899_TMGRAMP , 0x10 },
+ { STB0899_TMGTHD , 0x30 },
+ { STB0899_IDCCOMP , 0xfd },
+ { STB0899_QDCCOMP , 0xff },
+ { STB0899_POWERI , 0x0c },
+ { STB0899_POWERQ , 0x0f },
+ { STB0899_RCOMP , 0x6c },
+ { STB0899_AGCIQIN , 0x80 },
+ { STB0899_AGC2I1 , 0x06 },
+ { STB0899_AGC2I2 , 0x00 },
+ { STB0899_TLIR , 0x30 },
+ { STB0899_RTF , 0x7f },
+ { STB0899_DSTATUS , 0x00 },
+ { STB0899_LDI , 0xbc },
+ { STB0899_CFRM , 0xea },
+ { STB0899_CFRL , 0x31 },
+ { STB0899_NIRM , 0x2b },
+ { STB0899_NIRL , 0x80 },
+ { STB0899_ISYMB , 0x1d },
+ { STB0899_QSYMB , 0xa6 },
+ { STB0899_SFRH , 0x2f },
+ { STB0899_SFRM , 0x68 },
+ { STB0899_SFRL , 0x40 },
+ { STB0899_SFRUPH , 0x2f },
+ { STB0899_SFRUPM , 0x68 },
+ { STB0899_SFRUPL , 0x40 },
+ { STB0899_EQUAI1 , 0x02 },
+ { STB0899_EQUAQ1 , 0xff },
+ { STB0899_EQUAI2 , 0x04 },
+ { STB0899_EQUAQ2 , 0x05 },
+ { STB0899_EQUAI3 , 0x02 },
+ { STB0899_EQUAQ3 , 0xfd },
+ { STB0899_EQUAI4 , 0x03 },
+ { STB0899_EQUAQ4 , 0x07 },
+ { STB0899_EQUAI5 , 0x08 },
+ { STB0899_EQUAQ5 , 0xf5 },
+ { STB0899_DSTATUS2 , 0x00 },
+ { STB0899_VSTATUS , 0x00 },
+ { STB0899_VERROR , 0x86 },
+ { STB0899_IQSWAP , 0x2a },
+ { STB0899_ECNT1M , 0x00 },
+ { STB0899_ECNT1L , 0x00 },
+ { STB0899_ECNT2M , 0x00 },
+ { STB0899_ECNT2L , 0x00 },
+ { STB0899_ECNT3M , 0x0a },
+ { STB0899_ECNT3L , 0xad },
+ { STB0899_FECAUTO1 , 0x06 },
+ { STB0899_FECM , 0x01 },
+ { STB0899_VTH12 , 0xb0 },
+ { STB0899_VTH23 , 0x7a },
+ { STB0899_VTH34 , 0x58 },
+ { STB0899_VTH56 , 0x38 },
+ { STB0899_VTH67 , 0x34 },
+ { STB0899_VTH78 , 0x24 },
+ { STB0899_PRVIT , 0xff },
+ { STB0899_VITSYNC , 0x19 },
+ { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+ { STB0899_TSULC , 0x42 },
+ { STB0899_RSLLC , 0x41 },
+ { STB0899_TSLPL , 0x12 },
+ { STB0899_TSCFGH , 0x0c },
+ { STB0899_TSCFGM , 0x00 },
+ { STB0899_TSCFGL , 0x00 },
+ { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */
+ { STB0899_RSSYNCDEL , 0x00 },
+ { STB0899_TSINHDELH , 0x02 },
+ { STB0899_TSINHDELM , 0x00 },
+ { STB0899_TSINHDELL , 0x00 },
+ { STB0899_TSLLSTKM , 0x1b },
+ { STB0899_TSLLSTKL , 0xb3 },
+ { STB0899_TSULSTKM , 0x00 },
+ { STB0899_TSULSTKL , 0x00 },
+ { STB0899_PCKLENUL , 0xbc },
+ { STB0899_PCKLENLL , 0xcc },
+ { STB0899_RSPCKLEN , 0xbd },
+ { STB0899_TSSTATUS , 0x90 },
+ { STB0899_ERRCTRL1 , 0xb6 },
+ { STB0899_ERRCTRL2 , 0x95 },
+ { STB0899_ERRCTRL3 , 0x8d },
+ { STB0899_DMONMSK1 , 0x27 },
+ { STB0899_DMONMSK0 , 0x03 },
+ { STB0899_DEMAPVIT , 0x5c },
+ { STB0899_PLPARM , 0x19 },
+ { STB0899_PDELCTRL , 0x48 },
+ { STB0899_PDELCTRL2 , 0x00 },
+ { STB0899_BBHCTRL1 , 0x00 },
+ { STB0899_BBHCTRL2 , 0x00 },
+ { STB0899_HYSTTHRESH , 0x77 },
+ { STB0899_MATCSTM , 0x00 },
+ { STB0899_MATCSTL , 0x00 },
+ { STB0899_UPLCSTM , 0x00 },
+ { STB0899_UPLCSTL , 0x00 },
+ { STB0899_DFLCSTM , 0x00 },
+ { STB0899_DFLCSTL , 0x00 },
+ { STB0899_SYNCCST , 0x00 },
+ { STB0899_SYNCDCSTM , 0x00 },
+ { STB0899_SYNCDCSTL , 0x00 },
+ { STB0899_ISI_ENTRY , 0x00 },
+ { STB0899_ISI_BIT_EN , 0x00 },
+ { STB0899_MATSTRM , 0xf0 },
+ { STB0899_MATSTRL , 0x02 },
+ { STB0899_UPLSTRM , 0x45 },
+ { STB0899_UPLSTRL , 0x60 },
+ { STB0899_DFLSTRM , 0xe3 },
+ { STB0899_DFLSTRL , 0x00 },
+ { STB0899_SYNCSTR , 0x47 },
+ { STB0899_SYNCDSTRM , 0x05 },
+ { STB0899_SYNCDSTRL , 0x18 },
+ { STB0899_CFGPDELSTATUS1 , 0x19 },
+ { STB0899_CFGPDELSTATUS2 , 0x2b },
+ { STB0899_BBFERRORM , 0x00 },
+ { STB0899_BBFERRORL , 0x01 },
+ { STB0899_UPKTERRORM , 0x00 },
+ { STB0899_UPKTERRORL , 0x00 },
+ { 0xffff , 0xff },
+};
+
+
+
+struct stb0899_config az6027_stb0899_config = {
+ .init_dev = az6027_stb0899_s1_init_1,
+ .init_s2_demod = stb0899_s2_init_2,
+ .init_s1_demod = az6027_stb0899_s1_init_3,
+ .init_s2_fec = stb0899_s2_init_4,
+ .init_tst = stb0899_s1_init_5,
+
+ .demod_address = 0xd0, /* 0x68, 0xd0 >> 1 */
+
+ .xtal_freq = 27000000,
+ .inversion = IQ_SWAP_ON, /* 1 */
+
+ .lo_clk = 76500000,
+ .hi_clk = 99000000,
+
+ .esno_ave = STB0899_DVBS2_ESNO_AVE,
+ .esno_quant = STB0899_DVBS2_ESNO_QUANT,
+ .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE,
+ .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE,
+ .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD,
+ .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+ .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+ .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF,
+ .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+ .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS,
+ .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+ .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS,
+ .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER,
+
+ .tuner_get_frequency = stb6100_get_frequency,
+ .tuner_set_frequency = stb6100_set_frequency,
+ .tuner_set_bandwidth = stb6100_set_bandwidth,
+ .tuner_get_bandwidth = stb6100_get_bandwidth,
+ .tuner_set_rfsiggain = NULL,
+};
+
+struct stb6100_config az6027_stb6100_config = {
+ .tuner_address = 0xc0,
+ .refclock = 27000000,
+};
+
+
+/* check for mutex FIXME */
+int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+{
+ int ret = -1;
+ if (mutex_lock_interruptible(&d->usb_mutex))
+ return -EAGAIN;
+
+ ret = usb_control_msg(d->udev,
+ usb_rcvctrlpipe(d->udev, 0),
+ req,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ value,
+ index,
+ b,
+ blen,
+ 2000);
+
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EIO;
+ } else
+ ret = 0;
+
+ deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
+ debug_dump(b, blen, deb_xfer);
+
+ mutex_unlock(&d->usb_mutex);
+ return ret;
+}
+
+static int az6027_usb_out_op(struct dvb_usb_device *d,
+ u8 req,
+ u16 value,
+ u16 index,
+ u8 *b,
+ int blen)
+{
+ int ret;
+
+ deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
+ debug_dump(b, blen, deb_xfer);
+
+ if (mutex_lock_interruptible(&d->usb_mutex))
+ return -EAGAIN;
+
+ ret = usb_control_msg(d->udev,
+ usb_sndctrlpipe(d->udev, 0),
+ req,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ value,
+ index,
+ b,
+ blen,
+ 2000);
+
+ if (ret != blen) {
+ warn("usb out operation failed. (%d)", ret);
+ mutex_unlock(&d->usb_mutex);
+ return -EIO;
+ } else{
+ mutex_unlock(&d->usb_mutex);
+ return 0;
+ }
+}
+
+static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ deb_info("%s %d", __func__, onoff);
+
+ req = 0xBC;
+ value = onoff;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ warn("usb out operation failed. (%d)", ret);
+
+ return ret;
+}
+
+/* keys for the enclosed remote control */
+static struct dvb_usb_rc_key az6027_rc_keys[] = {
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+};
+
+/* remote control stuff (does not work with my box) */
+static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ return 0;
+}
+
+/*
+int az6027_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 v = onoff;
+ return az6027_usb_out_op(d,0xBC,v,3,NULL,1);
+}
+*/
+
+static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot,
+ int address)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC1;
+ value = address;
+ index = 0;
+ blen = 1;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EINVAL;
+ } else {
+ ret = b[0];
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
+ int slot,
+ int address,
+ u8 value)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value1;
+ u16 index;
+ int blen;
+
+ deb_info("%s %d", __func__, slot);
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+ req = 0xC2;
+ value1 = address;
+ index = value;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
+ if (ret != 0)
+ warn("usb out operation failed. (%d)", ret);
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC3;
+ value = address;
+ index = 0;
+ blen = 2;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EINVAL;
+ } else {
+ if (b[0] == 0)
+ warn("Read CI IO error");
+
+ ret = b[1];
+ deb_info("read cam data = %x from 0x%x", b[1], value);
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca,
+ int slot,
+ u8 address,
+ u8 value)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value1;
+ u16 index;
+ int blen;
+
+ if (slot != 0)
+ return -EINVAL;
+
+ mutex_lock(&state->ca_mutex);
+ req = 0xC4;
+ value1 = address;
+ index = value;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ req = 0xC8;
+ value = 0;
+ index = 0;
+ blen = 1;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EIO;
+ } else{
+ ret = b[0];
+ }
+ return ret;
+}
+
+static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret, i;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC6;
+ value = 1;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+ msleep(500);
+ req = 0xC6;
+ value = 0;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+ for (i = 0; i < 15; i++) {
+ msleep(100);
+
+ if (CI_CamReady(ca, slot)) {
+ deb_info("CAM Ready");
+ break;
+ }
+ }
+ msleep(5000);
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+ return 0;
+}
+
+static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ deb_info("%s", __func__);
+ mutex_lock(&state->ca_mutex);
+ req = 0xC7;
+ value = 1;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+ if (ret != 0) {
+ warn("usb out operation failed. (%d)", ret);
+ goto failed;
+ }
+
+failed:
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+ u8 b[12];
+
+ mutex_lock(&state->ca_mutex);
+
+ req = 0xC5;
+ value = 0;
+ index = 0;
+ blen = 1;
+
+ ret = az6027_usb_in_op(d, req, value, index, b, blen);
+ if (ret < 0) {
+ warn("usb in operation failed. (%d)", ret);
+ ret = -EIO;
+ } else
+ ret = 0;
+
+ if (b[0] == 0) {
+ ret = 0;
+
+ } else if (b[0] == 1) {
+ ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
+ DVB_CA_EN50221_POLL_CAM_READY;
+ }
+
+ mutex_unlock(&state->ca_mutex);
+ return ret;
+}
+
+
+static void az6027_ci_uninit(struct dvb_usb_device *d)
+{
+ struct az6027_device_state *state;
+
+ deb_info("%s", __func__);
+
+ if (NULL == d)
+ return;
+
+ state = (struct az6027_device_state *)d->priv;
+ if (NULL == state)
+ return;
+
+ if (NULL == state->ca.data)
+ return;
+
+ dvb_ca_en50221_release(&state->ca);
+
+ memset(&state->ca, 0, sizeof(state->ca));
+}
+
+
+static int az6027_ci_init(struct dvb_usb_adapter *a)
+{
+ struct dvb_usb_device *d = a->dev;
+ struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+ int ret;
+
+ deb_info("%s", __func__);
+
+ mutex_init(&state->ca_mutex);
+
+ state->ca.owner = THIS_MODULE;
+ state->ca.read_attribute_mem = az6027_ci_read_attribute_mem;
+ state->ca.write_attribute_mem = az6027_ci_write_attribute_mem;
+ state->ca.read_cam_control = az6027_ci_read_cam_control;
+ state->ca.write_cam_control = az6027_ci_write_cam_control;
+ state->ca.slot_reset = az6027_ci_slot_reset;
+ state->ca.slot_shutdown = az6027_ci_slot_shutdown;
+ state->ca.slot_ts_enable = az6027_ci_slot_ts_enable;
+ state->ca.poll_slot_status = az6027_ci_poll_slot_status;
+ state->ca.data = d;
+
+ ret = dvb_ca_en50221_init(&a->dvb_adap,
+ &state->ca,
+ 0, /* flags */
+ 1);/* n_slots */
+ if (ret != 0) {
+ err("Cannot initialize CI: Error %d.", ret);
+ memset(&state->ca, 0, sizeof(state->ca));
+ return ret;
+ }
+
+ deb_info("CI initialized.");
+
+ return 0;
+}
+
+/*
+static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
+{
+ az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6);
+ return 0;
+}
+*/
+
+static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+
+ u8 buf;
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+ struct i2c_msg i2c_msg = {
+ .addr = 0x99,
+ .flags = 0,
+ .buf = &buf,
+ .len = 1
+ };
+
+ /*
+ * 2 --18v
+ * 1 --13v
+ * 0 --off
+ */
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ buf = 1;
+ ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ break;
+
+ case SEC_VOLTAGE_18:
+ buf = 2;
+ ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ break;
+
+ case SEC_VOLTAGE_OFF:
+ buf = 0;
+ ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static int az6027_frontend_poweron(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ req = 0xBC;
+ value = 1; /* power on */
+ index = 3;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ return 0;
+}
+static int az6027_frontend_reset(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ /* reset demodulator */
+ req = 0xC0;
+ value = 1; /* high */
+ index = 3;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ req = 0xC0;
+ value = 0; /* low */
+ index = 3;
+ blen = 0;
+ msleep_interruptible(200);
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ msleep_interruptible(200);
+
+ req = 0xC0;
+ value = 1; /*high */
+ index = 3;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ msleep_interruptible(200);
+ return 0;
+}
+
+static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret;
+ u8 req;
+ u16 value;
+ u16 index;
+ int blen;
+
+ /* TS passthrough */
+ req = 0xC7;
+ value = onoff;
+ index = 0;
+ blen = 0;
+
+ ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+ if (ret != 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int az6027_frontend_attach(struct dvb_usb_adapter *adap)
+{
+
+ az6027_frontend_poweron(adap);
+ az6027_frontend_reset(adap);
+
+ deb_info("adap = %p, dev = %p\n", adap, adap->dev);
+ adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
+
+ if (adap->fe) {
+ deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
+ if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
+ deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
+ adap->fe->ops.set_voltage = az6027_set_voltage;
+ az6027_ci_init(adap);
+ } else {
+ adap->fe = NULL;
+ }
+ } else
+ warn("no front-end attached\n");
+
+ az6027_frontend_tsbypass(adap, 0);
+
+ return 0;
+}
+
+static struct dvb_usb_device_properties az6027_properties;
+
+static void az6027_usb_disconnect(struct usb_interface *intf)
+{
+ struct dvb_usb_device *d = usb_get_intfdata(intf);
+ az6027_ci_uninit(d);
+ dvb_usb_device_exit(intf);
+}
+
+
+static int az6027_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return dvb_usb_device_init(intf,
+ &az6027_properties,
+ THIS_MODULE,
+ NULL,
+ adapter_nr);
+}
+
+/* I2C */
+static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i = 0, j = 0, len = 0;
+ int ret;
+ u16 index;
+ u16 value;
+ int length;
+ u8 req;
+ u8 data[256];
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num > 2)
+ warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+ for (i = 0; i < num; i++) {
+
+ if (msg[i].addr == 0x99) {
+ req = 0xBE;
+ index = 0;
+ value = msg[i].buf[0] & 0x00ff;
+ length = 1;
+ az6027_usb_out_op(d, req, value, index, data, length);
+ }
+
+ if (msg[i].addr == 0xd0) {
+ /* write/read request */
+ if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+ req = 0xB9;
+ index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
+ value = msg[i].addr + (msg[i].len << 8);
+ length = msg[i + 1].len + 6;
+ ret = az6027_usb_in_op(d, req, value, index, data, length);
+ len = msg[i + 1].len;
+ for (j = 0; j < len; j++)
+ msg[i + 1].buf[j] = data[j + 5];
+
+ i++;
+ } else {
+
+ if (msg[i].addr == 0xd0) {
+ /* demod 16bit addr */
+ req = 0xBD;
+ index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
+ value = msg[i].addr + (2 << 8);
+ length = msg[i].len - 2;
+ len = msg[i].len - 2;
+ for (j = 0; j < len; j++)
+ data[j] = msg[i].buf[j + 2];
+
+ }
+ az6027_usb_out_op(d, req, value, index, data, length);
+ }
+ }
+
+ if (msg[i].addr == 0xc0) {
+ if (msg[i].flags & I2C_M_RD) {
+
+ req = 0xB9;
+ index = 0x0;
+ value = msg[i].addr;
+ length = msg[i].len + 6;
+ ret = az6027_usb_in_op(d, req, value, index, data, length);
+ len = msg[i].len;
+ for (j = 0; j < len; j++)
+ msg[i].buf[j] = data[j + 5];
+
+ } else {
+
+ req = 0xBD;
+ index = msg[i].buf[0] & 0x00FF;
+ value = msg[i].addr + (1 << 8);
+ length = msg[i].len - 1;
+ len = msg[i].len - 1;
+
+ for (j = 0; j < len; j++)
+ data[j] = msg[i].buf[j + 1];
+
+ az6027_usb_out_op(d, req, value, index, data, length);
+ }
+ }
+ }
+ mutex_unlock(&d->i2c_mutex);
+
+ return i;
+}
+
+
+static u32 az6027_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm az6027_i2c_algo = {
+ .master_xfer = az6027_i2c_xfer,
+ .functionality = az6027_i2c_func,
+};
+
+int az6027_identify_state(struct usb_device *udev,
+ struct dvb_usb_device_properties *props,
+ struct dvb_usb_device_description **desc,
+ int *cold)
+{
+ u8 b[16];
+ s16 ret = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ 0xb7,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ 6,
+ 0,
+ b,
+ 6,
+ USB_CTRL_GET_TIMEOUT);
+
+ *cold = ret <= 0;
+
+ deb_info("cold: %d\n", *cold);
+ return 0;
+}
+
+
+static struct usb_device_id az6027_usb_table[] = {
+ { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) },
+ { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI) },
+ { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(usb, az6027_usb_table);
+
+static struct dvb_usb_device_properties az6027_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-az6027-03.fw",
+ .no_reconnect = 1,
+
+ .size_of_priv = sizeof(struct az6027_device_state),
+ .identify_state = az6027_identify_state,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = az6027_streaming_ctrl,
+ .frontend_attach = az6027_frontend_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 10,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ }
+ },
+/*
+ .power_ctrl = az6027_power_ctrl,
+ .read_mac_address = az6027_read_mac_addr,
+ */
+ .rc_key_map = az6027_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(az6027_rc_keys),
+ .rc_interval = 400,
+ .rc_query = az6027_rc_query,
+ .i2c_algo = &az6027_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
+ .cold_ids = { &az6027_usb_table[0], NULL },
+ .warm_ids = { NULL },
+ },
+ { NULL },
+ }
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver az6027_usb_driver = {
+ .name = "dvb_usb_az6027",
+ .probe = az6027_usb_probe,
+ .disconnect = az6027_usb_disconnect,
+ .id_table = az6027_usb_table,
+};
+
+/* module stuff */
+static int __init az6027_usb_module_init(void)
+{
+ int result;
+
+ result = usb_register(&az6027_usb_driver);
+ if (result) {
+ err("usb_register failed. (%d)", result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit az6027_usb_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&az6027_usb_driver);
+}
+
+module_init(az6027_usb_module_init);
+module_exit(az6027_usb_module_exit);
+
+MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>");
+MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/dvb/dvb-usb/az6027.h
new file mode 100644
index 000000000000..f3afe17f3f3d
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/az6027.h
@@ -0,0 +1,14 @@
+#ifndef _DVB_USB_VP6027_H_
+#define _DVB_USB_VP6027_H_
+
+#define DVB_USB_LOG_PREFIX "az6027"
+#include "dvb-usb.h"
+
+
+extern int dvb_usb_az6027_debug;
+#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args)
+#define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args)
+#define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args)
+
+#endif
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 05fb28e9c69e..a7b8405c291e 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -1184,6 +1184,9 @@ static struct atbm8830_config mygica_d689_atbm8830_cfg = {
.osc_clk_freq = 30400, /* in kHz */
.if_freq = 0, /* zero IF */
.zif_swap_iq = 1,
+ .agc_min = 0x2E,
+ .agc_max = 0x90,
+ .agc_hold_loop = 0,
};
static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 495a90577c5f..83fc24a6c31a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -42,7 +42,6 @@ struct dib0700_state {
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
- u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 0d3c9a9a33be..4f961d2d1817 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,14 +471,209 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
return dib0700_ctrl_wr(adap->dev, b, 4);
}
+/* Number of keypresses to ignore before start repeating */
+#define RC_REPEAT_DELAY_V1_20 10
+
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u16 system;
+ u8 data;
+ u8 not_data;
+};
+#define RC_MSG_SIZE_V1_20 6
+
+static void dib0700_rc_urb_completion(struct urb *purb)
+{
+ struct dvb_usb_device *d = purb->context;
+ struct dvb_usb_rc_key *keymap;
+ struct dib0700_state *st;
+ struct dib0700_rc_response poll_reply;
+ u8 *buf;
+ int found = 0;
+ u32 event;
+ int state;
+ int i;
+
+ deb_info("%s()\n", __func__);
+ if (d == NULL)
+ return;
+
+ if (d->rc_input_dev == NULL) {
+ /* This will occur if disable_rc_polling=1 */
+ usb_free_urb(purb);
+ return;
+ }
+
+ keymap = d->props.rc_key_map;
+ st = d->priv;
+ buf = (u8 *)purb->transfer_buffer;
+
+ if (purb->status < 0) {
+ deb_info("discontinuing polling\n");
+ usb_free_urb(purb);
+ return;
+ }
+
+ if (purb->actual_length != RC_MSG_SIZE_V1_20) {
+ deb_info("malformed rc msg size=%d\n", purb->actual_length);
+ goto resubmit;
+ }
+
+ /* Set initial results in case we exit the function early */
+ event = 0;
+ state = REMOTE_NO_KEY_PRESSED;
+
+ deb_data("IR raw %02X %02X %02X %02X %02X %02X (len %d)\n", buf[0],
+ buf[1], buf[2], buf[3], buf[4], buf[5], purb->actual_length);
+
+ switch (dvb_usb_dib0700_ir_proto) {
+ case 0:
+ /* NEC Protocol */
+ poll_reply.report_id = 0;
+ poll_reply.data_state = 1;
+ poll_reply.system = buf[2];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /* NEC protocol sends repeat code as 0 0 0 FF */
+ if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
+ && (poll_reply.not_data == 0xff)) {
+ poll_reply.data_state = 2;
+ break;
+ }
+ break;
+ default:
+ /* RC5 Protocol */
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system = (buf[2] << 8) | buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+ break;
+ }
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %04x %02x %02x",
+ poll_reply.system,
+ poll_reply.data, poll_reply.not_data);
+ goto resubmit;
+ }
+
+ deb_data("rid=%02x ds=%02x sm=%04x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system, poll_reply.data, poll_reply.not_data);
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
+ rc5_data(&keymap[i]) == poll_reply.data) {
+ event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %04x %02x %02x",
+ poll_reply.system, poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ goto resubmit;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ event = keymap[i].event;
+ state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ event = d->last_event;
+ state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ switch (state) {
+ case REMOTE_NO_KEY_PRESSED:
+ break;
+ case REMOTE_KEY_PRESSED:
+ deb_info("key pressed\n");
+ d->last_event = event;
+ case REMOTE_KEY_REPEAT:
+ deb_info("key repeated\n");
+ input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_sync(d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->rc_input_dev);
+ break;
+ default:
+ break;
+ }
+
+resubmit:
+ /* Clean the buffer before we requeue */
+ memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20);
+
+ /* Requeue URB */
+ usb_submit_urb(purb, GFP_ATOMIC);
+}
+
int dib0700_rc_setup(struct dvb_usb_device *d)
{
+ struct dib0700_state *st = d->priv;
u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
- int i = dib0700_ctrl_wr(d, rc_setup, 3);
+ struct urb *purb;
+ int ret;
+ int i;
+
+ if (d->props.rc_key_map == NULL)
+ return 0;
+
+ /* Set the IR mode */
+ i = dib0700_ctrl_wr(d, rc_setup, 3);
if (i<0) {
err("ir protocol setup failed");
return -1;
}
+
+ if (st->fw_version < 0x10200)
+ return 0;
+
+ /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
+ purb = usb_alloc_urb(0, GFP_KERNEL);
+ if (purb == NULL) {
+ err("rc usb alloc urb failed\n");
+ return -1;
+ }
+
+ purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
+ if (purb->transfer_buffer == NULL) {
+ err("rc kzalloc failed\n");
+ usb_free_urb(purb);
+ return -1;
+ }
+
+ purb->status = -EINPROGRESS;
+ usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
+ purb->transfer_buffer, RC_MSG_SIZE_V1_20,
+ dib0700_rc_urb_completion, d);
+
+ ret = usb_submit_urb(purb, GFP_ATOMIC);
+ if (ret != 0) {
+ err("rc submit urb failed\n");
+ return -1;
+ }
+
return 0;
}
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 44972d01bbd0..34eab05afc6c 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -472,20 +472,25 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
/* Number of keypresses to ignore before start repeating */
#define RC_REPEAT_DELAY 6
-#define RC_REPEAT_DELAY_V1_20 10
-
-
-/* Used by firmware versions < 1.20 (deprecated) */
-static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
- int *state)
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
u8 key[4];
int i;
struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
struct dib0700_state *st = d->priv;
+
*event = 0;
*state = REMOTE_NO_KEY_PRESSED;
+
+ if (st->fw_version >= 0x10200) {
+ /* For 1.20 firmware , We need to keep the RC polling
+ callback so we can reuse the input device setup in
+ dvb-usb-remote.c. However, the actual work is being done
+ in the bulk URB completion handler. */
+ return 0;
+ }
+
i=dib0700_ctrl_rd(d,rc_request,2,key,4);
if (i<=0) {
err("RC Query Failed");
@@ -557,149 +562,6 @@ static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
return 0;
}
-/* This is the structure of the RC response packet starting in firmware 1.20 */
-struct dib0700_rc_response {
- u8 report_id;
- u8 data_state;
- u16 system;
- u8 data;
- u8 not_data;
-};
-
-/* This supports the new IR response format for firmware v1.20 */
-static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
- int *state)
-{
- struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
- struct dib0700_state *st = d->priv;
- struct dib0700_rc_response poll_reply;
- u8 buf[6];
- int i;
- int status;
- int actlen;
- int found = 0;
-
- /* Set initial results in case we exit the function early */
- *event = 0;
- *state = REMOTE_NO_KEY_PRESSED;
-
- /* Firmware v1.20 provides RC data via bulk endpoint 1 */
- status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
- sizeof(buf), &actlen, 50);
- if (status < 0) {
- /* No data available (meaning no key press) */
- return 0;
- }
-
-
- switch (dvb_usb_dib0700_ir_proto) {
- case 0:
- poll_reply.report_id = 0;
- poll_reply.data_state = 1;
- poll_reply.system = buf[2];
- poll_reply.data = buf[4];
- poll_reply.not_data = buf[5];
-
- /* NEC protocol sends repeat code as 0 0 0 FF */
- if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
- && (poll_reply.not_data == 0xff)) {
- poll_reply.data_state = 2;
- break;
- }
- break;
- default:
- if (actlen != sizeof(buf)) {
- /* We didn't get back the 6 byte message we expected */
- err("Unexpected RC response size [%d]", actlen);
- return -1;
- }
-
- poll_reply.report_id = buf[0];
- poll_reply.data_state = buf[1];
- poll_reply.system = (buf[2] << 8) | buf[3];
- poll_reply.data = buf[4];
- poll_reply.not_data = buf[5];
-
- break;
- }
-
- if ((poll_reply.data + poll_reply.not_data) != 0xff) {
- /* Key failed integrity check */
- err("key failed integrity check: %04x %02x %02x",
- poll_reply.system,
- poll_reply.data, poll_reply.not_data);
- return -1;
- }
-
-
- /* Find the key in the map */
- for (i = 0; i < d->props.rc_key_map_size; i++) {
- if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
- rc5_data(&keymap[i]) == poll_reply.data) {
- *event = keymap[i].event;
- found = 1;
- break;
- }
- }
-
- if (found == 0) {
- err("Unknown remote controller key: %04x %02x %02x",
- poll_reply.system,
- poll_reply.data, poll_reply.not_data);
- d->last_event = 0;
- return 0;
- }
-
- if (poll_reply.data_state == 1) {
- /* New key hit */
- st->rc_counter = 0;
- *event = keymap[i].event;
- *state = REMOTE_KEY_PRESSED;
- d->last_event = keymap[i].event;
- } else if (poll_reply.data_state == 2) {
- /* Key repeated */
- st->rc_counter++;
-
- /* prevents unwanted double hits */
- if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
- *event = d->last_event;
- *state = REMOTE_KEY_PRESSED;
- st->rc_counter = RC_REPEAT_DELAY_V1_20;
- }
- } else {
- err("Unknown data state [%d]", poll_reply.data_state);
- }
-
- return 0;
-}
-
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
- struct dib0700_state *st = d->priv;
-
- /* Because some people may have improperly named firmware files,
- let's figure out whether to use the new firmware call or the legacy
- call based on the firmware version embedded in the file */
- if (st->rc_func_version == 0) {
- u32 hwver, romver, ramver, fwtype;
- int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
- &fwtype);
- if (ret < 0) {
- err("Could not determine version info");
- return -1;
- }
- if (ramver < 0x10200)
- st->rc_func_version = 1;
- else
- st->rc_func_version = 2;
- }
-
- if (st->rc_func_version == 2)
- return dib0700_rc_query_v1_20(d, event, state);
- else
- return dib0700_rc_query_legacy(d, event, state);
-}
-
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
/* Key codes for the tiny Pinnacle remote*/
{ 0x0700, KEY_MUTE },
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index bc3581d58ced..ae8b57acfe05 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -64,6 +64,8 @@
#define USB_VID_HUMAX_COEX 0x10b9
#define USB_VID_774 0x7a69
#define USB_VID_EVOLUTEPC 0x1e59
+#define USB_VID_AZUREWAVE 0x13d3
+#define USB_VID_TECHNISAT 0x14f7
/* Product IDs */
#define USB_PID_ADSTECH_USB2_COLD 0xa333
@@ -138,6 +140,7 @@
#define USB_PID_TWINHAN_VP7021_COLD 0x3207
#define USB_PID_TWINHAN_VP7021_WARM 0x3208
#define USB_PID_TINYTWIN 0x3226
+#define USB_PID_TINYTWIN_2 0xe402
#define USB_PID_DNTV_TINYUSB2_COLD 0x3223
#define USB_PID_DNTV_TINYUSB2_WARM 0x3224
#define USB_PID_ULTIMA_TVBOX_COLD 0x8105
@@ -209,6 +212,7 @@
#define USB_PID_PINNACLE_PCTV71E 0x022b
#define USB_PID_PINNACLE_PCTV72E 0x0236
#define USB_PID_PINNACLE_PCTV73E 0x0237
+#define USB_PID_PINNACLE_PCTV310E 0x3211
#define USB_PID_PINNACLE_PCTV801E 0x023a
#define USB_PID_PINNACLE_PCTV801E_SE 0x023b
#define USB_PID_PINNACLE_PCTV73A 0x0243
@@ -248,6 +252,7 @@
#define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361
#define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6
#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7
+#define USB_PID_WINFAST_DTV2000DS 0x6a04
#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
@@ -290,5 +295,7 @@
#define USB_PID_FRIIO_WHITE 0x0001
#define USB_PID_TVWAY_PLUS 0x0002
#define USB_PID_SVEON_STV20 0xe39d
-
+#define USB_PID_AZUREWAVE_AZ6027 0x3275
+#define USB_PID_TERRATEC_DVBS2CI 0x3275
+#define USB_PID_TECHNISAT_USB2_HDCI 0x0002
#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index e331db8c77b2..5d91f70d2d2d 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -243,7 +243,7 @@ int dvb_usb_device_init(struct usb_interface *intf,
d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
if (d == NULL) {
err("no memory for 'struct dvb_usb_device'");
- return ret;
+ return -ENOMEM;
}
d->udev = udev;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 6b5ded9e7d5d..a03ef7efec9a 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -107,6 +107,7 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
case REMOTE_KEY_REPEAT:
deb_rc("key repeated\n");
input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_sync(d->rc_input_dev);
input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
input_sync(d->rc_input_dev);
break;
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 64132c0cf80d..accc65509b07 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1,6 +1,7 @@
/* DVB USB framework compliant Linux driver for the
* DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
-* TeVii S600, S630, S650 Cards
+* TeVii S600, S630, S650,
+* Prof 1100, 7500 Cards
* Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by)
*
* This program is free software; you can redistribute it and/or modify it
@@ -469,11 +470,13 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct usb_device *udev;
int ret = 0;
int len, i, j;
if (!d)
return -ENODEV;
+ udev = d->udev;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
@@ -488,8 +491,13 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
}
case (DW2102_VOLTAGE_CTRL): {
u8 obuf[2];
+
+ obuf[0] = 1;
+ obuf[1] = msg[j].buf[1];/* off-on */
+ ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
+ obuf, 2, DW210X_WRITE_MSG);
obuf[0] = 3;
- obuf[1] = msg[j].buf[0];
+ obuf[1] = msg[j].buf[0];/* 13v-18v */
ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
obuf, 2, DW210X_WRITE_MSG);
break;
@@ -527,6 +535,17 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
i += 16;
len -= 16;
} while (len > 0);
+ } else if ((udev->descriptor.idProduct == 0x7500)
+ && (j < (num - 1))) {
+ /* write register addr before read */
+ u8 obuf[msg[j].len + 2];
+ obuf[0] = msg[j + 1].len;
+ obuf[1] = (msg[j].addr << 1);
+ memcpy(obuf + 2, msg[j].buf, msg[j].len);
+ ret = dw210x_op_rw(d->udev, 0x92, 0, 0,
+ obuf, msg[j].len + 2,
+ DW210X_WRITE_MSG);
+ break;
} else {
/* write registers */
u8 obuf[msg[j].len + 2];
@@ -651,18 +670,25 @@ static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- static u8 command_13v[1] = {0x00};
- static u8 command_18v[1] = {0x01};
- struct i2c_msg msg[] = {
- {.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
- .buf = command_13v, .len = 1},
+ static u8 command_13v[] = {0x00, 0x01};
+ static u8 command_18v[] = {0x01, 0x01};
+ static u8 command_off[] = {0x00, 0x00};
+ struct i2c_msg msg = {
+ .addr = DW2102_VOLTAGE_CTRL,
+ .flags = 0,
+ .buf = command_off,
+ .len = 2,
};
struct dvb_usb_adapter *udev_adap =
(struct dvb_usb_adapter *)(fe->dvb->priv);
if (voltage == SEC_VOLTAGE_18)
- msg[0].buf = command_18v;
- i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+ msg.buf = command_18v;
+ else if (voltage == SEC_VOLTAGE_13)
+ msg.buf = command_13v;
+
+ i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1);
+
return 0;
}
@@ -735,6 +761,18 @@ static struct stv6110_config dw2104_stv6110_config = {
.clk_div = 1,
};
+static struct stv0900_config prof_7500_stv0900_config = {
+ .demod_address = 0x6a,
+ .demod_mode = 0,
+ .xtal = 27000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .tun1_maddress = 0,/* 0x60 */
+ .tun1_adc = 0,/* 2 Vpp */
+ .path1_mode = 3,
+ .tun1_type = 3,
+};
+
static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
{
struct dvb_tuner_ops *tuner_ops = NULL;
@@ -882,6 +920,19 @@ static int s6x0_frontend_attach(struct dvb_usb_adapter *d)
return -EIO;
}
+static int prof_7500_frontend_attach(struct dvb_usb_adapter *d)
+{
+ d->fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config,
+ &d->dev->i2c_adap, 0);
+ if (d->fe == NULL)
+ return -EIO;
+ d->fe->ops.set_voltage = dw210x_set_voltage;
+
+ info("Attached STV0900+STB6100A!\n");
+
+ return 0;
+}
+
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
{
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -1073,6 +1124,7 @@ static struct usb_device_id dw2102_table[] = {
{USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
{USB_DEVICE(0x3011, USB_PID_PROF_1100)},
{USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
+ {USB_DEVICE(0x3034, 0x7500)},
{ }
};
@@ -1387,9 +1439,30 @@ static struct dvb_usb_device_properties s6x0_properties = {
}
};
+struct dvb_usb_device_properties *p7500;
+static struct dvb_usb_device_description d7500 = {
+ "Prof 7500 USB DVB-S2",
+ {&dw2102_table[9], NULL},
+ {NULL},
+};
+
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+
+ p7500 = kzalloc(sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
+ if (!p7500)
+ return -ENOMEM;
+ /* copy default structure */
+ memcpy(p7500, &s6x0_properties,
+ sizeof(struct dvb_usb_device_properties));
+ /* fill only different fields */
+ p7500->firmware = "dvb-usb-p7500.fw";
+ p7500->devices[0] = d7500;
+ p7500->rc_key_map = tbs_rc_keys;
+ p7500->rc_key_map_size = ARRAY_SIZE(tbs_rc_keys);
+ p7500->adapter->frontend_attach = prof_7500_frontend_attach;
+
if (0 == dvb_usb_device_init(intf, &dw2102_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &dw2104_properties,
@@ -1397,6 +1470,8 @@ static int dw2102_probe(struct usb_interface *intf,
0 == dvb_usb_device_init(intf, &dw3101_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &s6x0_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, p7500,
THIS_MODULE, NULL, adapter_nr))
return 0;
@@ -1431,6 +1506,6 @@ MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
" DVB-C 3101 USB2.0,"
" TeVii S600, S630, S650, S660 USB2.0,"
- " Prof 1100 USB2.0 devices");
+ " Prof 1100, 7500 USB2.0 devices");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index ebb7b9fd115b..d14bd227b502 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -366,7 +366,7 @@ static u8 init_code[][2] = {
{0x76, 0x0C},
};
-const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+static const int init_code_len = sizeof(init_code) / sizeof(u8[2]);
static int jdvbt90502_init(struct dvb_frontend *fe)
{
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index ef9b7bed13ff..737ffa36ac9c 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -16,6 +16,9 @@
#include "qt1010.h"
#include "tda1004x.h"
#include "tda827x.h"
+
+#include <media/tuner.h>
+#include "tuner-simple.h"
#include <asm/unaligned.h>
/* debug */
@@ -158,11 +161,14 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
case 0x93:
case 0x92:
+ case 0x83: /* pinnacle PCTV310e */
+ case 0x82:
m->rep_count = 0;
*state = REMOTE_KEY_PRESSED;
goto unlock;
case 0x91:
+ case 0x81: /* pinnacle PCTV310e */
/* prevent immediate auto-repeat */
if (++m->rep_count > 2)
*state = REMOTE_KEY_REPEAT;
@@ -546,6 +552,14 @@ static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
return 0;
}
+static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ dvb_attach(simple_tuner_attach, adap->fe,
+ &adap->dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3);
+ return 0;
+}
+
/* device-specific initialization */
static struct m920x_inits megasky_rc_init [] = {
{ M9206_RC_INIT2, 0xa8 },
@@ -562,6 +576,18 @@ static struct m920x_inits tvwalkertwin_rc_init [] = {
{ } /* terminating entry */
};
+static struct m920x_inits pinnacle310e_init[] = {
+ /* without these the tuner don't work */
+ { 0xff20, 0x9b },
+ { 0xff22, 0x70 },
+
+ /* rc settings */
+ { 0xff50, 0x80 },
+ { M9206_RC_INIT1, 0x00 },
+ { M9206_RC_INIT2, 0xff },
+ { } /* terminating entry */
+};
+
/* ir keymaps */
static struct dvb_usb_rc_key megasky_rc_keys [] = {
{ 0x0012, KEY_POWER },
@@ -602,11 +628,68 @@ static struct dvb_usb_rc_key tvwalkertwin_rc_keys [] = {
{ 0x001e, KEY_VOLUMEUP },
};
+static struct dvb_usb_rc_key pinnacle310e_rc_keys[] = {
+ { 0x16, KEY_POWER },
+ { 0x17, KEY_FAVORITES },
+ { 0x0f, KEY_TEXT },
+ { 0x48, KEY_MEDIA }, /* preview */
+ { 0x1c, KEY_EPG },
+ { 0x04, KEY_LIST }, /* record list */
+ { 0x03, KEY_1 },
+ { 0x01, KEY_2 },
+ { 0x06, KEY_3 },
+ { 0x09, KEY_4 },
+ { 0x1d, KEY_5 },
+ { 0x1f, KEY_6 },
+ { 0x0d, KEY_7 },
+ { 0x19, KEY_8 },
+ { 0x1b, KEY_9 },
+ { 0x15, KEY_0 },
+ { 0x0c, KEY_CANCEL },
+ { 0x4a, KEY_CLEAR },
+ { 0x13, KEY_BACK },
+ { 0x00, KEY_TAB },
+ { 0x4b, KEY_UP },
+ { 0x4e, KEY_LEFT },
+ { 0x52, KEY_RIGHT },
+ { 0x51, KEY_DOWN },
+ { 0x4f, KEY_ENTER }, /* could also be KEY_OK */
+ { 0x1e, KEY_VOLUMEUP },
+ { 0x0a, KEY_VOLUMEDOWN },
+ { 0x05, KEY_CHANNELUP },
+ { 0x02, KEY_CHANNELDOWN },
+ { 0x11, KEY_RECORD },
+ { 0x14, KEY_PLAY },
+ { 0x4c, KEY_PAUSE },
+ { 0x1a, KEY_STOP },
+ { 0x40, KEY_REWIND },
+ { 0x12, KEY_FASTFORWARD },
+ { 0x41, KEY_PREVIOUSSONG }, /* Replay */
+ { 0x42, KEY_NEXTSONG }, /* Skip */
+ { 0x54, KEY_CAMERA }, /* Capture */
+/* { 0x50, KEY_SAP }, */ /* Sap */
+ { 0x47, KEY_CYCLEWINDOWS }, /* Pip */
+ { 0x4d, KEY_SCREEN }, /* FullScreen */
+ { 0x08, KEY_SUBTITLE },
+ { 0x0e, KEY_MUTE },
+/* { 0x49, KEY_LR }, */ /* L/R */
+ { 0x07, KEY_SLEEP }, /* Hibernate */
+ { 0x08, KEY_MEDIA }, /* A/V */
+ { 0x0e, KEY_MENU }, /* Recall */
+ { 0x45, KEY_ZOOMIN },
+ { 0x46, KEY_ZOOMOUT },
+ { 0x18, KEY_TV }, /* Red */
+ { 0x53, KEY_VCR }, /* Green */
+ { 0x5e, KEY_SAT }, /* Yellow */
+ { 0x5f, KEY_PLAYER }, /* Blue */
+};
+
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties megasky_properties;
static struct dvb_usb_device_properties digivox_mini_ii_properties;
static struct dvb_usb_device_properties tvwalkertwin_properties;
static struct dvb_usb_device_properties dposh_properties;
+static struct dvb_usb_device_properties pinnacle_pctv310e_properties;
static int m920x_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -652,6 +735,13 @@ static int m920x_probe(struct usb_interface *intf,
goto found;
}
+ ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties,
+ THIS_MODULE, &d, adapter_nr);
+ if (ret == 0) {
+ rc_init_seq = pinnacle310e_init;
+ goto found;
+ }
+
return ret;
} else {
/* Another interface on a multi-tuner device */
@@ -682,6 +772,7 @@ static struct usb_device_id m920x_table [] = {
USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
+ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, m920x_table);
@@ -895,6 +986,56 @@ static struct dvb_usb_device_properties dposh_properties = {
}
};
+static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .download_firmware = NULL,
+
+ .rc_interval = 100,
+ .rc_key_map = pinnacle310e_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(pinnacle310e_rc_keys),
+ .rc_query = m920x_rc_query,
+
+ .size_of_priv = sizeof(struct m920x_state),
+
+ .identify_state = m920x_identify_state,
+ .num_adapters = 1,
+ .adapter = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m920x_pid_filter,
+ .pid_filter_ctrl = m920x_pid_filter_ctrl,
+
+ .frontend_attach = m920x_mt352_frontend_attach,
+ .tuner_attach = m920x_fmd1216me_tuner_attach,
+
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x84,
+ .u = {
+ .isoc = {
+ .framesperurb = 128,
+ .framesize = 564,
+ .interval = 1,
+ }
+ }
+ },
+ } },
+ .i2c_algo = &m920x_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Pinnacle PCTV 310e",
+ { &m920x_table[6], NULL },
+ { NULL },
+ }
+ }
+};
+
static struct usb_driver m920x_driver = {
.name = "dvb_usb_m920x",
.probe = m920x_probe,
diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h
index 37532890accd..3c061518ffc1 100644
--- a/drivers/media/dvb/dvb-usb/m920x.h
+++ b/drivers/media/dvb/dvb-usb/m920x.h
@@ -18,7 +18,7 @@
#define M9206_FW 0x30
#define M9206_MAX_FILTERS 8
-#define M9206_MAX_ADAPTERS 2
+#define M9206_MAX_ADAPTERS 4
/*
sequences found in logs:
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index d4e230941679..830557696ae6 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -138,7 +138,7 @@ static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
msg[i].buf,
msg[i].len
- )!= msg[i].len)) {
+ )) != msg[i].len) {
break;
}
if (dvb_usb_opera1_debug & 0x10)
OpenPOWER on IntegriCloud