1 files changed, 0 insertions, 303 deletions

diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c b/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
deleted file mode 100644
index 642f0596a5ba..000000000000
--- a/drivers/media/dvb/dibusb/dvb-dibusb-usb.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * dvb-dibusb-usb.c is part of the driver for mobile USB Budget DVB-T devices
- * based on reference design made by DiBcom (http://www.dibcom.fr/)
- *
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- * see dvb-dibusb-core.c for more copyright details.
- *
- * This file contains functions for initializing and handling the
- * usb specific stuff.
- */
-#include "dvb-dibusb.h"
-
-#include <linux/version.h>
-#include <linux/pci.h>
-
-int dibusb_readwrite_usb(struct usb_dibusb *dib, u8 *wbuf, u16 wlen, u8 *rbuf,
-		u16 rlen)
-{
-	int actlen,ret = -ENOMEM;
-
-	if (wbuf == NULL || wlen == 0)
-		return -EINVAL;
-
-	if ((ret = down_interruptible(&dib->usb_sem)))
-		return ret;
-
-	debug_dump(wbuf,wlen);
-
-	ret = usb_bulk_msg(dib->udev,usb_sndbulkpipe(dib->udev,
-			dib->dibdev->dev_cl->pipe_cmd), wbuf,wlen,&actlen,
-			DIBUSB_I2C_TIMEOUT);
-
-	if (ret)
-		err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
-	else
-		ret = actlen != wlen ? -1 : 0;
-
-	/* an answer is expected, and no error before */
-	if (!ret && rbuf && rlen) {
-		ret = usb_bulk_msg(dib->udev,usb_rcvbulkpipe(dib->udev,
-				dib->dibdev->dev_cl->pipe_cmd),rbuf,rlen,&actlen,
-				DIBUSB_I2C_TIMEOUT);
-
-		if (ret)
-			err("recv bulk message failed: %d",ret);
-		else {
-			deb_alot("rlen: %d\n",rlen);
-			debug_dump(rbuf,actlen);
-		}
-	}
-
-	up(&dib->usb_sem);
-	return ret;
-}
-
-/*
- * Cypress controls
- */
-int dibusb_write_usb(struct usb_dibusb *dib, u8 *buf, u16 len)
-{
-	return dibusb_readwrite_usb(dib,buf,len,NULL,0);
-}
-
-#if 0
-/*
- * #if 0'ing the following functions as they are not in use _now_,
- * but probably will be sometime.
- */
-/*
- * do not use this, just a workaround for a bug,
- * which will hopefully never occur :).
- */
-int dibusb_interrupt_read_loop(struct usb_dibusb *dib)
-{
-	u8 b[1] = { DIBUSB_REQ_INTR_READ };
-	return dibusb_write_usb(dib,b,1);
-}
-#endif
-
-/*
- * ioctl for the firmware
- */
-static int dibusb_ioctl_cmd(struct usb_dibusb *dib, u8 cmd, u8 *param, int plen)
-{
-	u8 b[34];
-	int size = plen > 32 ? 32 : plen;
-	memset(b,0,34);
-	b[0] = DIBUSB_REQ_SET_IOCTL;
-	b[1] = cmd;
-
-	if (size > 0)
-		memcpy(&b[2],param,size);
-
-	return dibusb_write_usb(dib,b,34); //2+size);
-}
-
-/*
- * ioctl for power control
- */
-int dibusb_hw_wakeup(struct dvb_frontend *fe)
-{
-	struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv;
-	u8 b[1] = { DIBUSB_IOCTL_POWER_WAKEUP };
-	deb_info("dibusb-device is getting up.\n");
-
-	switch (dib->dibdev->dev_cl->id) {
-		case DTT200U:
-			break;
-		default:
-			dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
-			break;
-	}
-
-	if (dib->fe_init)
-		return dib->fe_init(fe);
-
-	return 0;
-}
-
-int dibusb_hw_sleep(struct dvb_frontend *fe)
-{
-	struct usb_dibusb *dib = (struct usb_dibusb *) fe->dvb->priv;
-	u8 b[1] = { DIBUSB_IOCTL_POWER_SLEEP };
-	deb_info("dibusb-device is going to bed.\n");
-	/* workaround, something is wrong, when dibusb 1.1 device are going to bed too late */
-	switch (dib->dibdev->dev_cl->id) {
-		case DIBUSB1_1:
-		case NOVAT_USB2:
-		case DTT200U:
-			break;
-		default:
-			dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_POWER_MODE, b,1);
-			break;
-	}
-	if (dib->fe_sleep)
-		return dib->fe_sleep(fe);
-
-	return 0;
-}
-
-int dibusb_set_streaming_mode(struct usb_dibusb *dib,u8 mode)
-{
-	u8 b[2] = { DIBUSB_REQ_SET_STREAMING_MODE, mode };
-	return dibusb_readwrite_usb(dib,b,2,NULL,0);
-}
-
-static int dibusb_urb_kill(struct usb_dibusb *dib)
-{
-	int i;
-deb_info("trying to kill urbs\n");
-	if (dib->init_state & DIBUSB_STATE_URB_SUBMIT) {
-		for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
-			deb_info("killing URB no. %d.\n",i);
-
-			/* stop the URB */
-			usb_kill_urb(dib->urb_list[i]);
-		}
-	} else
-	deb_info(" URBs not killed.\n");
-	dib->init_state &= ~DIBUSB_STATE_URB_SUBMIT;
-	return 0;
-}
-
-static int dibusb_urb_submit(struct usb_dibusb *dib)
-{
-	int i,ret;
-	if (dib->init_state & DIBUSB_STATE_URB_INIT) {
-		for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
-			deb_info("submitting URB no. %d\n",i);
-			if ((ret = usb_submit_urb(dib->urb_list[i],GFP_ATOMIC))) {
-				err("could not submit buffer urb no. %d - get them all back\n",i);
-				dibusb_urb_kill(dib);
-				return ret;
-			}
-			dib->init_state |= DIBUSB_STATE_URB_SUBMIT;
-		}
-	}
-	return 0;
-}
-
-int dibusb_streaming(struct usb_dibusb *dib,int onoff)
-{
-	if (onoff)
-		dibusb_urb_submit(dib);
-	else
-		dibusb_urb_kill(dib);
-
-	switch (dib->dibdev->dev_cl->id) {
-		case DIBUSB2_0:
-		case DIBUSB2_0B:
-		case NOVAT_USB2:
-		case UMT2_0:
-			if (onoff)
-				return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_ENABLE_STREAM,NULL,0);
-			else
-				return dibusb_ioctl_cmd(dib,DIBUSB_IOCTL_CMD_DISABLE_STREAM,NULL,0);
-			break;
-		default:
-			break;
-	}
-	return 0;
-}
-
-int dibusb_urb_init(struct usb_dibusb *dib)
-{
-	int i,bufsize,def_pid_parse = 1;
-
-	/*
-	 * when reloading the driver w/o replugging the device
-	 * a timeout occures, this helps
-	 */
-	usb_clear_halt(dib->udev,usb_sndbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
-	usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_cmd));
-	usb_clear_halt(dib->udev,usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data));
-
-	/* allocate the array for the data transfer URBs */
-	dib->urb_list = kmalloc(dib->dibdev->dev_cl->urb_count*sizeof(struct urb *),GFP_KERNEL);
-	if (dib->urb_list == NULL)
-		return -ENOMEM;
-	memset(dib->urb_list,0,dib->dibdev->dev_cl->urb_count*sizeof(struct urb *));
-
-	dib->init_state |= DIBUSB_STATE_URB_LIST;
-
-	bufsize = dib->dibdev->dev_cl->urb_count*dib->dibdev->dev_cl->urb_buffer_size;
-	deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize);
-	/* allocate the actual buffer for the URBs */
-	if ((dib->buffer = pci_alloc_consistent(NULL,bufsize,&dib->dma_handle)) == NULL) {
-		deb_info("not enough memory.\n");
-		return -ENOMEM;
-	}
-	deb_info("allocation complete\n");
-	memset(dib->buffer,0,bufsize);
-
-	dib->init_state |= DIBUSB_STATE_URB_BUF;
-
-	/* allocate and submit the URBs */
-	for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
-		if (!(dib->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) {
-			return -ENOMEM;
-		}
-
-		usb_fill_bulk_urb( dib->urb_list[i], dib->udev,
-				usb_rcvbulkpipe(dib->udev,dib->dibdev->dev_cl->pipe_data),
-				&dib->buffer[i*dib->dibdev->dev_cl->urb_buffer_size],
-				dib->dibdev->dev_cl->urb_buffer_size,
-				dibusb_urb_complete, dib);
-
-		dib->urb_list[i]->transfer_flags = 0;
-
-		dib->init_state |= DIBUSB_STATE_URB_INIT;
-	}
-
-	/* dib->pid_parse here contains the value of the module parameter */
-	/* decide if pid parsing can be deactivated:
-	 * is possible (by device type) and wanted (by user)
-	 */
-	switch (dib->dibdev->dev_cl->id) {
-		case DIBUSB2_0:
-		case DIBUSB2_0B:
-			if (dib->udev->speed == USB_SPEED_HIGH && !dib->pid_parse) {
-				def_pid_parse = 0;
-				info("running at HIGH speed, will deliver the complete TS.");
-			} else
-				info("will use pid_parsing.");
-			break;
-		default:
-			break;
-	}
-	/* from here on it contains the device and user decision */
-	dib->pid_parse = def_pid_parse;
-
-	return 0;
-}
-
-int dibusb_urb_exit(struct usb_dibusb *dib)
-{
-	int i;
-
-	dibusb_urb_kill(dib);
-
-	if (dib->init_state & DIBUSB_STATE_URB_LIST) {
-		for (i = 0; i < dib->dibdev->dev_cl->urb_count; i++) {
-			if (dib->urb_list[i] != NULL) {
-				deb_info("freeing URB no. %d.\n",i);
-				/* free the URBs */
-				usb_free_urb(dib->urb_list[i]);
-			}
-		}
-		/* free the urb array */
-		kfree(dib->urb_list);
-		dib->init_state &= ~DIBUSB_STATE_URB_LIST;
-	}
-
-	if (dib->init_state & DIBUSB_STATE_URB_BUF)
-		pci_free_consistent(NULL,
-			dib->dibdev->dev_cl->urb_buffer_size*dib->dibdev->dev_cl->urb_count,
-			dib->buffer,dib->dma_handle);
-
-	dib->init_state &= ~DIBUSB_STATE_URB_BUF;
-	dib->init_state &= ~DIBUSB_STATE_URB_INIT;
-	return 0;
-}