diff options
Diffstat (limited to 'drivers/media/dvb/b2c2/flexcop-fe-tuner.c')
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 678 |
1 files changed, 0 insertions, 678 deletions
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c deleted file mode 100644 index 850a6c606750..000000000000 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ /dev/null @@ -1,678 +0,0 @@ -/* - * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III - * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling - * see flexcop.c for copyright information - */ -#include <media/tuner.h> -#include "flexcop.h" -#include "mt312.h" -#include "stv0299.h" -#include "s5h1420.h" -#include "itd1000.h" -#include "cx24113.h" -#include "cx24123.h" -#include "isl6421.h" -#include "mt352.h" -#include "bcm3510.h" -#include "nxt200x.h" -#include "dvb-pll.h" -#include "lgdt330x.h" -#include "tuner-simple.h" -#include "stv0297.h" - - -/* Can we use the specified front-end? Remember that if we are compiled - * into the kernel we can't call code that's in modules. */ -#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \ - (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE))) - -/* lnb control */ -#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299) -static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) -{ - struct flexcop_device *fc = fe->dvb->priv; - flexcop_ibi_value v; - deb_tuner("polarity/voltage = %u\n", voltage); - - v = fc->read_ibi_reg(fc, misc_204); - switch (voltage) { - case SEC_VOLTAGE_OFF: - v.misc_204.ACPI1_sig = 1; - break; - case SEC_VOLTAGE_13: - v.misc_204.ACPI1_sig = 0; - v.misc_204.LNB_L_H_sig = 0; - break; - case SEC_VOLTAGE_18: - v.misc_204.ACPI1_sig = 0; - v.misc_204.LNB_L_H_sig = 1; - break; - default: - err("unknown SEC_VOLTAGE value"); - return -EINVAL; - } - return fc->write_ibi_reg(fc, misc_204, v); -} -#endif - -#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312) -static int flexcop_sleep(struct dvb_frontend* fe) -{ - struct flexcop_device *fc = fe->dvb->priv; - if (fc->fe_sleep) - return fc->fe_sleep(fe); - return 0; -} -#endif - -/* SkyStar2 DVB-S rev 2.3 */ -#if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL) -static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) -{ -/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ - struct flexcop_device *fc = fe->dvb->priv; - flexcop_ibi_value v; - u16 ax; - v.raw = 0; - deb_tuner("tone = %u\n",tone); - - switch (tone) { - case SEC_TONE_ON: - ax = 0x01ff; - break; - case SEC_TONE_OFF: - ax = 0; - break; - default: - err("unknown SEC_TONE value"); - return -EINVAL; - } - - v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ - v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; - v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; - return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); -} - -static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) -{ - flexcop_set_tone(fe, SEC_TONE_ON); - udelay(data ? 500 : 1000); - flexcop_set_tone(fe, SEC_TONE_OFF); - udelay(data ? 1000 : 500); -} - -static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) -{ - int i, par = 1, d; - for (i = 7; i >= 0; i--) { - d = (data >> i) & 1; - par ^= d; - flexcop_diseqc_send_bit(fe, d); - } - flexcop_diseqc_send_bit(fe, par); -} - -static int flexcop_send_diseqc_msg(struct dvb_frontend *fe, - int len, u8 *msg, unsigned long burst) -{ - int i; - - flexcop_set_tone(fe, SEC_TONE_OFF); - mdelay(16); - - for (i = 0; i < len; i++) - flexcop_diseqc_send_byte(fe,msg[i]); - mdelay(16); - - if (burst != -1) { - if (burst) - flexcop_diseqc_send_byte(fe, 0xff); - else { - flexcop_set_tone(fe, SEC_TONE_ON); - mdelay(12); - udelay(500); - flexcop_set_tone(fe, SEC_TONE_OFF); - } - msleep(20); - } - return 0; -} - -static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, - struct dvb_diseqc_master_cmd *cmd) -{ - return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); -} - -static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, - fe_sec_mini_cmd_t minicmd) -{ - return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); -} - -static struct mt312_config skystar23_samsung_tbdu18132_config = { - .demod_address = 0x0e, -}; - -static int skystar2_rev23_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - struct dvb_frontend_ops *ops; - - fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); - if (!fc->fe) - return 0; - - if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, - DVB_PLL_SAMSUNG_TBDU18132)) - return 0; - - ops = &fc->fe->ops; - ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; - ops->diseqc_send_burst = flexcop_diseqc_send_burst; - ops->set_tone = flexcop_set_tone; - ops->set_voltage = flexcop_set_voltage; - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - return 1; -} -#else -#define skystar2_rev23_attach NULL -#endif - -/* SkyStar2 DVB-S rev 2.6 */ -#if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL) -static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, - u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { - aclk = 0xb7; bclk = 0x47; - } else if (srate < 3000000) { - aclk = 0xb7; bclk = 0x4b; - } else if (srate < 7000000) { - aclk = 0xb7; bclk = 0x4f; - } else if (srate < 14000000) { - aclk = 0xb7; bclk = 0x53; - } else if (srate < 30000000) { - aclk = 0xb6; bclk = 0x53; - } else if (srate < 45000000) { - aclk = 0xb4; bclk = 0x51; - } - - stv0299_writereg(fe, 0x13, aclk); - stv0299_writereg(fe, 0x14, bclk); - stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg(fe, 0x21, ratio & 0xf0); - return 0; -} - -static u8 samsung_tbmu24112_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7D, - 0x05, 0x35, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0xC3, - 0x0C, 0x00, - 0x0D, 0x81, - 0x0E, 0x23, - 0x0F, 0x12, - 0x10, 0x7E, - 0x11, 0x84, - 0x12, 0xB9, - 0x13, 0x88, - 0x14, 0x89, - 0x15, 0xC9, - 0x16, 0x00, - 0x17, 0x5C, - 0x18, 0x00, - 0x19, 0x00, - 0x1A, 0x00, - 0x1C, 0x00, - 0x1D, 0x00, - 0x1E, 0x00, - 0x1F, 0x3A, - 0x20, 0x2E, - 0x21, 0x80, - 0x22, 0xFF, - 0x23, 0xC1, - 0x28, 0x00, - 0x29, 0x1E, - 0x2A, 0x14, - 0x2B, 0x0F, - 0x2C, 0x09, - 0x2D, 0x05, - 0x31, 0x1F, - 0x32, 0x19, - 0x33, 0xFE, - 0x34, 0x93, - 0xff, 0xff, -}; - -static struct stv0299_config samsung_tbmu24112_config = { - .demod_address = 0x68, - .inittab = samsung_tbmu24112_inittab, - .mclk = 88000000UL, - .invert = 0, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_LK, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, -}; - -static int skystar2_rev26_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); - if (!fc->fe) - return 0; - - if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, - DVB_PLL_SAMSUNG_TBMU24112)) - return 0; - - fc->fe->ops.set_voltage = flexcop_set_voltage; - fc->fe_sleep = fc->fe->ops.sleep; - fc->fe->ops.sleep = flexcop_sleep; - return 1; - -} -#else -#define skystar2_rev26_attach NULL -#endif - -/* SkyStar2 DVB-S rev 2.7 */ -#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000) -static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { - .demod_address = 0x53, - .invert = 1, - .repeated_start_workaround = 1, - .serial_mpeg = 1, -}; - -static struct itd1000_config skystar2_rev2_7_itd1000_config = { - .i2c_address = 0x61, -}; - -static int skystar2_rev27_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - flexcop_ibi_value r108; - struct i2c_adapter *i2c_tuner; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[0].no_base_addr = 1; - fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, - i2c); - if (!fc->fe) - goto fail; - - i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); - if (!i2c_tuner) - goto fail; - - fc->fe_sleep = fc->fe->ops.sleep; - fc->fe->ops.sleep = flexcop_sleep; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[2].no_base_addr = 1; - if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, - 0x08, 1, 1)) { - err("ISL6421 could NOT be attached"); - goto fail_isl; - } - info("ISL6421 successfully attached"); - - /* the ITD1000 requires a lower i2c clock - is it a problem ? */ - r108.raw = 0x00000506; - fc->write_ibi_reg(fc, tw_sm_c_108, r108); - if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner, - &skystar2_rev2_7_itd1000_config)) { - err("ITD1000 could NOT be attached"); - /* Should i2c clock be restored? */ - goto fail_isl; - } - info("ITD1000 successfully attached"); - - return 1; - -fail_isl: - fc->fc_i2c_adap[2].no_base_addr = 0; -fail: - /* for the next devices we need it again */ - fc->fc_i2c_adap[0].no_base_addr = 0; - return 0; -} -#else -#define skystar2_rev27_attach NULL -#endif - -/* SkyStar2 rev 2.8 */ -#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113) -static struct cx24123_config skystar2_rev2_8_cx24123_config = { - .demod_address = 0x55, - .dont_use_pll = 1, - .agc_callback = cx24113_agc_callback, -}; - -static const struct cx24113_config skystar2_rev2_8_cx24113_config = { - .i2c_addr = 0x54, - .xtal_khz = 10111, -}; - -static int skystar2_rev28_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - struct i2c_adapter *i2c_tuner; - - fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config, - i2c); - if (!fc->fe) - return 0; - - i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); - if (!i2c_tuner) - return 0; - - if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config, - i2c_tuner)) { - err("CX24113 could NOT be attached"); - return 0; - } - info("CX24113 successfully attached"); - - fc->fc_i2c_adap[2].no_base_addr = 1; - if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, - 0x08, 0, 0)) { - err("ISL6421 could NOT be attached"); - fc->fc_i2c_adap[2].no_base_addr = 0; - return 0; - } - info("ISL6421 successfully attached"); - /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an - * IR-receiver (PIC16F818) - but the card has no input for that ??? */ - return 1; -} -#else -#define skystar2_rev28_attach NULL -#endif - -/* AirStar DVB-T */ -#if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL) -static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) -{ - static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; - static u8 mt352_reset[] = { 0x50, 0x80 }; - static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 }; - static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); - return 0; -} - -static struct mt352_config samsung_tdtc9251dh0_config = { - .demod_address = 0x0f, - .demod_init = samsung_tdtc9251dh0_demod_init, -}; - -static int airstar_dvbt_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); - if (!fc->fe) - return 0; - - return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, - DVB_PLL_SAMSUNG_TDTC9251DH0); -} -#else -#define airstar_dvbt_attach NULL -#endif - -/* AirStar ATSC 1st generation */ -#if FE_SUPPORTED(BCM3510) -static int flexcop_fe_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char* name) -{ - struct flexcop_device *fc = fe->dvb->priv; - return request_firmware(fw, name, fc->dev); -} - -static struct bcm3510_config air2pc_atsc_first_gen_config = { - .demod_address = 0x0f, - .request_firmware = flexcop_fe_request_firmware, -}; - -static int airstar_atsc1_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); - return fc->fe != NULL; -} -#else -#define airstar_atsc1_attach NULL -#endif - -/* AirStar ATSC 2nd generation */ -#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL) -static struct nxt200x_config samsung_tbmv_config = { - .demod_address = 0x0a, -}; - -static int airstar_atsc2_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); - if (!fc->fe) - return 0; - - return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, - DVB_PLL_SAMSUNG_TBMV); -} -#else -#define airstar_atsc2_attach NULL -#endif - -/* AirStar ATSC 3rd generation */ -#if FE_SUPPORTED(LGDT330X) -static struct lgdt330x_config air2pc_atsc_hd5000_config = { - .demod_address = 0x59, - .demod_chip = LGDT3303, - .serial_mpeg = 0x04, - .clock_polarity_flip = 1, -}; - -static int airstar_atsc3_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); - if (!fc->fe) - return 0; - - return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, - TUNER_LG_TDVS_H06XF); -} -#else -#define airstar_atsc3_attach NULL -#endif - -/* CableStar2 DVB-C */ -#if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL) -static u8 alps_tdee4_stv0297_inittab[] = { - 0x80, 0x01, - 0x80, 0x00, - 0x81, 0x01, - 0x81, 0x00, - 0x00, 0x48, - 0x01, 0x58, - 0x03, 0x00, - 0x04, 0x00, - 0x07, 0x00, - 0x08, 0x00, - 0x30, 0xff, - 0x31, 0x9d, - 0x32, 0xff, - 0x33, 0x00, - 0x34, 0x29, - 0x35, 0x55, - 0x36, 0x80, - 0x37, 0x6e, - 0x38, 0x9c, - 0x40, 0x1a, - 0x41, 0xfe, - 0x42, 0x33, - 0x43, 0x00, - 0x44, 0xff, - 0x45, 0x00, - 0x46, 0x00, - 0x49, 0x04, - 0x4a, 0x51, - 0x4b, 0xf8, - 0x52, 0x30, - 0x53, 0x06, - 0x59, 0x06, - 0x5a, 0x5e, - 0x5b, 0x04, - 0x61, 0x49, - 0x62, 0x0a, - 0x70, 0xff, - 0x71, 0x04, - 0x72, 0x00, - 0x73, 0x00, - 0x74, 0x0c, - 0x80, 0x20, - 0x81, 0x00, - 0x82, 0x30, - 0x83, 0x00, - 0x84, 0x04, - 0x85, 0x22, - 0x86, 0x08, - 0x87, 0x1b, - 0x88, 0x00, - 0x89, 0x00, - 0x90, 0x00, - 0x91, 0x04, - 0xa0, 0x86, - 0xa1, 0x00, - 0xa2, 0x00, - 0xb0, 0x91, - 0xb1, 0x0b, - 0xc0, 0x5b, - 0xc1, 0x10, - 0xc2, 0x12, - 0xd0, 0x02, - 0xd1, 0x00, - 0xd2, 0x00, - 0xd3, 0x00, - 0xd4, 0x02, - 0xd5, 0x00, - 0xde, 0x00, - 0xdf, 0x01, - 0xff, 0xff, -}; - -static struct stv0297_config alps_tdee4_stv0297_config = { - .demod_address = 0x1c, - .inittab = alps_tdee4_stv0297_inittab, -}; - -static int cablestar2_attach(struct flexcop_device *fc, - struct i2c_adapter *i2c) -{ - fc->fc_i2c_adap[0].no_base_addr = 1; - fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); - if (!fc->fe) - goto fail; - - /* This tuner doesn't use the stv0297's I2C gate, but instead the - * tuner is connected to a different flexcop I2C adapter. */ - if (fc->fe->ops.i2c_gate_ctrl) - fc->fe->ops.i2c_gate_ctrl(fc->fe, 0); - fc->fe->ops.i2c_gate_ctrl = NULL; - - if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, - &fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4)) - goto fail; - - return 1; - -fail: - /* Reset for next frontend to try */ - fc->fc_i2c_adap[0].no_base_addr = 0; - return 0; -} -#else -#define cablestar2_attach NULL -#endif - -static struct { - flexcop_device_type_t type; - int (*attach)(struct flexcop_device *, struct i2c_adapter *); -} flexcop_frontends[] = { - { FC_SKY_REV27, skystar2_rev27_attach }, - { FC_SKY_REV28, skystar2_rev28_attach }, - { FC_SKY_REV26, skystar2_rev26_attach }, - { FC_AIR_DVBT, airstar_dvbt_attach }, - { FC_AIR_ATSC2, airstar_atsc2_attach }, - { FC_AIR_ATSC3, airstar_atsc3_attach }, - { FC_AIR_ATSC1, airstar_atsc1_attach }, - { FC_CABLE, cablestar2_attach }, - { FC_SKY_REV23, skystar2_rev23_attach }, -}; - -/* try to figure out the frontend */ -int flexcop_frontend_init(struct flexcop_device *fc) -{ - int i; - for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { - if (!flexcop_frontends[i].attach) - continue; - /* type needs to be set before, because of some workarounds - * done based on the probed card type */ - fc->dev_type = flexcop_frontends[i].type; - if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap)) - goto fe_found; - /* Clean up partially attached frontend */ - if (fc->fe) { - dvb_frontend_detach(fc->fe); - fc->fe = NULL; - } - } - fc->dev_type = FC_UNK; - err("no frontend driver found for this B2C2/FlexCop adapter"); - return -ENODEV; - -fe_found: - info("found '%s' .", fc->fe->ops.info.name); - if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { - err("frontend registration failed!"); - dvb_frontend_detach(fc->fe); - fc->fe = NULL; - return -EINVAL; - } - fc->init_state |= FC_STATE_FE_INIT; - return 0; -} - -void flexcop_frontend_exit(struct flexcop_device *fc) -{ - if (fc->init_state & FC_STATE_FE_INIT) { - dvb_unregister_frontend(fc->fe); - dvb_frontend_detach(fc->fe); - } - fc->init_state &= ~FC_STATE_FE_INIT; -} |
