diff options
Diffstat (limited to 'drivers/macintosh')
| -rw-r--r-- | drivers/macintosh/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/macintosh/Makefile | 14 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm.h | 3 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm_core.c | 10 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm_cpufreq_clamp.c | 6 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm_fcu_controls.c | 10 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm_mpu.h | 105 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm_pm72.c | 847 | ||||
| -rw-r--r-- | drivers/macintosh/windfarm_rm31.c | 740 |
9 files changed, 1736 insertions, 22 deletions
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index fa51af11c6f1..a555da64224e 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -204,11 +204,14 @@ config THERM_ADT746X better fan behaviour by default, and some manual control. config THERM_PM72 - tristate "Support for thermal management on PowerMac G5" + tristate "Support for thermal management on PowerMac G5 (AGP)" depends on I2C && I2C_POWERMAC && PPC_PMAC64 + default n help This driver provides thermostat and fan control for the desktop - G5 machines. + G5 machines. + + This is deprecated, use windfarm instead. config WINDFARM tristate "New PowerMac thermal control infrastructure" @@ -221,6 +224,22 @@ config WINDFARM_PM81 help This driver provides thermal control for the iMacG5 +config WINDFARM_PM72 + tristate "Support for thermal management on PowerMac G5 (AGP)" + depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU + select I2C_POWERMAC + help + This driver provides thermal control for the PowerMac G5 + "AGP" variants (PowerMac 7,2 and 7,3) + +config WINDFARM_RM31 + tristate "Support for thermal management on Xserve G5" + depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU + select I2C_POWERMAC + help + This driver provides thermal control for the Xserve G5 + (RackMac3,1) + config WINDFARM_PM91 tristate "Support for thermal management on PowerMac9,1" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 6652a6ebb6fa..6753b65f8ede 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -29,6 +29,20 @@ obj-$(CONFIG_THERM_PM72) += therm_pm72.o obj-$(CONFIG_THERM_WINDTUNNEL) += therm_windtunnel.o obj-$(CONFIG_THERM_ADT746X) += therm_adt746x.o obj-$(CONFIG_WINDFARM) += windfarm_core.o +obj-$(CONFIG_WINDFARM_PM72) += windfarm_fcu_controls.o \ + windfarm_ad7417_sensor.o \ + windfarm_lm75_sensor.o \ + windfarm_max6690_sensor.o \ + windfarm_pid.o \ + windfarm_cpufreq_clamp.o \ + windfarm_pm72.o +obj-$(CONFIG_WINDFARM_RM31) += windfarm_fcu_controls.o \ + windfarm_ad7417_sensor.o \ + windfarm_lm75_sensor.o \ + windfarm_lm87_sensor.o \ + windfarm_pid.o \ + windfarm_cpufreq_clamp.o \ + windfarm_rm31.o obj-$(CONFIG_WINDFARM_PM81) += windfarm_smu_controls.o \ windfarm_smu_sensors.o \ windfarm_lm75_sensor.o windfarm_pid.o \ diff --git a/drivers/macintosh/windfarm.h b/drivers/macintosh/windfarm.h index a9e385ee359e..028cdac2d33d 100644 --- a/drivers/macintosh/windfarm.h +++ b/drivers/macintosh/windfarm.h @@ -17,7 +17,7 @@ #include <linux/device.h> /* Display a 16.16 fixed point value */ -#define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16) +#define FIX32TOPRINT(f) (((s32)(f)) >> 16),(((((s32)(f)) & 0xffff) * 1000) >> 16) /* * Control objects @@ -41,6 +41,7 @@ struct wf_control { int type; struct kref ref; struct device_attribute attr; + void *priv; }; #define WF_CONTROL_TYPE_GENERIC 0 diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c index ebafc2543d5f..3ee198b65843 100644 --- a/drivers/macintosh/windfarm_core.c +++ b/drivers/macintosh/windfarm_core.c @@ -169,8 +169,11 @@ static ssize_t wf_show_control(struct device *dev, int err; err = ctrl->ops->get_value(ctrl, &val); - if (err < 0) + if (err < 0) { + if (err == -EFAULT) + return sprintf(buf, "<HW FAULT>\n"); return err; + } switch(ctrl->type) { case WF_CONTROL_RPM_FAN: typestr = " RPM"; @@ -481,11 +484,6 @@ static int __init windfarm_core_init(void) { DBG("wf: core loaded\n"); - /* Don't register on old machines that use therm_pm72 for now */ - if (of_machine_is_compatible("PowerMac7,2") || - of_machine_is_compatible("PowerMac7,3") || - of_machine_is_compatible("RackMac3,1")) - return -ENODEV; platform_device_register(&wf_platform_device); return 0; } diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c index 1a77a7c97d0e..72d1fdfe02a5 100644 --- a/drivers/macintosh/windfarm_cpufreq_clamp.c +++ b/drivers/macintosh/windfarm_cpufreq_clamp.c @@ -75,12 +75,6 @@ static int __init wf_cpufreq_clamp_init(void) { struct wf_control *clamp; - /* Don't register on old machines that use therm_pm72 for now */ - if (of_machine_is_compatible("PowerMac7,2") || - of_machine_is_compatible("PowerMac7,3") || - of_machine_is_compatible("RackMac3,1")) - return -ENODEV; - clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL); if (clamp == NULL) return -ENOMEM; diff --git a/drivers/macintosh/windfarm_fcu_controls.c b/drivers/macintosh/windfarm_fcu_controls.c index 871f8b4cf367..b3411edb324b 100644 --- a/drivers/macintosh/windfarm_fcu_controls.c +++ b/drivers/macintosh/windfarm_fcu_controls.c @@ -41,10 +41,10 @@ * applied to the setpoint RPM speed, that is basically the * speed we proviously "asked" for. * - * I'm not sure which of these Apple's algorithm is supposed - * to use + * I'm using 0 for now which is what therm_pm72 used to do and + * what Darwin -apparently- does based on observed behaviour. */ -#define RPM_PID_USE_ACTUAL_SPEED 1 +#define RPM_PID_USE_ACTUAL_SPEED 0 /* Default min/max for pumps */ #define CPU_PUMP_OUTPUT_MAX 3200 @@ -154,8 +154,6 @@ static int wf_fcu_fan_set_rpm(struct wf_control *ct, s32 value) if (value > fan->max) value = fan->max; - if (fan->target && fan->target == value) - return 0; fan->target = value; buf[0] = value >> (8 - shift); @@ -213,8 +211,6 @@ static int wf_fcu_fan_set_pwm(struct wf_control *ct, s32 value) if (value > fan->max) value = fan->max; - if (fan->target && fan->target == value) - return 0; fan->target = value; value = (value * 2559) / 1000; diff --git a/drivers/macintosh/windfarm_mpu.h b/drivers/macintosh/windfarm_mpu.h new file mode 100644 index 000000000000..046edc8c2ec5 --- /dev/null +++ b/drivers/macintosh/windfarm_mpu.h @@ -0,0 +1,105 @@ +/* + * Windfarm PowerMac thermal control + * + * Copyright 2012 Benjamin Herrenschmidt, IBM Corp. + * + * Released under the term of the GNU GPL v2. + */ + +#ifndef __WINDFARM_MPU_H +#define __WINDFARM_MPU_H + +typedef unsigned short fu16; +typedef int fs32; +typedef short fs16; + +/* Definition of the MPU data structure which contains per CPU + * calibration information (among others) for the G5 machines + */ +struct mpu_data +{ + u8 signature; /* 0x00 - EEPROM sig. */ + u8 bytes_used; /* 0x01 - Bytes used in eeprom (160 ?) */ + u8 size; /* 0x02 - EEPROM size (256 ?) */ + u8 version; /* 0x03 - EEPROM version */ + u32 data_revision; /* 0x04 - Dataset revision */ + u8 processor_bin_code[3]; /* 0x08 - Processor BIN code */ + u8 bin_code_expansion; /* 0x0b - ??? (padding ?) */ + u8 processor_num; /* 0x0c - Number of CPUs on this MPU */ + u8 input_mul_bus_div; /* 0x0d - Clock input multiplier/bus divider */ + u8 reserved1[2]; /* 0x0e - */ + u32 input_clk_freq_high; /* 0x10 - Input clock frequency high */ + u8 cpu_nb_target_cycles; /* 0x14 - ??? */ + u8 cpu_statlat; /* 0x15 - ??? */ + u8 cpu_snooplat; /* 0x16 - ??? */ + u8 cpu_snoopacc; /* 0x17 - ??? */ + u8 nb_paamwin; /* 0x18 - ??? */ + u8 nb_statlat; /* 0x19 - ??? */ + u8 nb_snooplat; /* 0x1a - ??? */ + u8 nb_snoopwin; /* 0x1b - ??? */ + u8 api_bus_mode; /* 0x1c - ??? */ + u8 reserved2[3]; /* 0x1d - */ + u32 input_clk_freq_low; /* 0x20 - Input clock frequency low */ + u8 processor_card_slot; /* 0x24 - Processor card slot number */ + u8 reserved3[2]; /* 0x25 - */ + u8 padjmax; /* 0x27 - Max power adjustment (Not in OF!) */ + u8 ttarget; /* 0x28 - Target temperature */ + u8 tmax; /* 0x29 - Max temperature */ + u8 pmaxh; /* 0x2a - Max power */ + u8 tguardband; /* 0x2b - Guardband temp ??? Hist. len in OSX */ + fs32 pid_gp; /* 0x2c - PID proportional gain */ + fs32 pid_gr; /* 0x30 - PID reset gain */ + fs32 pid_gd; /* 0x34 - PID derivative gain */ + fu16 voph; /* 0x38 - Vop High */ + fu16 vopl; /* 0x3a - Vop Low */ + fs16 nactual_die; /* 0x3c - nActual Die */ + fs16 nactual_heatsink; /* 0x3e - nActual Heatsink */ + fs16 nactual_system; /* 0x40 - nActual System */ + u16 calibration_flags; /* 0x42 - Calibration flags */ + fu16 mdiode; /* 0x44 - Diode M value (scaling factor) */ + fs16 bdiode; /* 0x46 - Diode B value (offset) */ + fs32 theta_heat_sink; /* 0x48 - Theta heat sink */ + u16 rminn_intake_fan; /* 0x4c - Intake fan min RPM */ + u16 rmaxn_intake_fan; /* 0x4e - Intake fan max RPM */ + u16 rminn_exhaust_fan; /* 0x50 - Exhaust fan min RPM */ + u16 rmaxn_exhaust_fan; /* 0x52 - Exhaust fan max RPM */ + u8 processor_part_num[8]; /* 0x54 - Processor part number XX pumps min/max */ + u32 processor_lot_num; /* 0x5c - Processor lot number */ + u8 orig_card_sernum[0x10]; /* 0x60 - Card original serial number */ + u8 curr_card_sernum[0x10]; /* 0x70 - Card current serial number */ + u8 mlb_sernum[0x18]; /* 0x80 - MLB serial number */ + u32 checksum1; /* 0x98 - */ + u32 checksum2; /* 0x9c - */ +}; /* Total size = 0xa0 */ + +static inline const struct mpu_data *wf_get_mpu(int cpu) +{ + struct device_node *np; + char nodename[64]; + const void *data; + int len; + + /* + * prom.c routine for finding a node by path is a bit brain dead + * and requires exact @xxx unit numbers. This is a bit ugly but + * will work for these machines + */ + sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0); + np = of_find_node_by_path(nodename); + if (!np) + return NULL; + data = of_get_property(np, "cpuid", &len); + of_node_put(np); + if (!data) + return NULL; + + /* + * We are naughty, we have dropped the reference to the device + * node and still return a pointer to the content. We know we + * can do that though as this is only ever called on PowerMac + * which cannot remove those nodes + */ + return data; +} + +#endif /* __WINDFARM_MPU_H */ diff --git a/drivers/macintosh/windfarm_pm72.c b/drivers/macintosh/windfarm_pm72.c new file mode 100644 index 000000000000..84ac913d7e3a --- /dev/null +++ b/drivers/macintosh/windfarm_pm72.c @@ -0,0 +1,847 @@ +/* + * Windfarm PowerMac thermal control. + * Control loops for PowerMac7,2 and 7,3 + * + * Copyright (C) 2012 Benjamin Herrenschmidt, IBM Corp. + * + * Use and redistribute under the terms of the GNU GPL v2. + */ +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <asm/prom.h> +#include <asm/smu.h> + +#include "windfarm.h" +#include "windfarm_pid.h" +#include "windfarm_mpu.h" + +#define VERSION "1.0" + +#undef DEBUG +#undef LOTSA_DEBUG + +#ifdef DEBUG +#define DBG(args...) printk(args) +#else +#define DBG(args...) do { } while(0) +#endif + +#ifdef LOTSA_DEBUG +#define DBG_LOTS(args...) printk(args) +#else +#define DBG_LOTS(args...) do { } while(0) +#endif + +/* define this to force CPU overtemp to 60 degree, useful for testing + * the overtemp code + */ +#undef HACKED_OVERTEMP + +/* We currently only handle 2 chips */ +#define NR_CHIPS 2 +#define NR_CPU_FANS 3 * NR_CHIPS + +/* Controls and sensors */ +static struct wf_sensor *sens_cpu_temp[NR_CHIPS]; +static struct wf_sensor *sens_cpu_volts[NR_CHIPS]; +static struct wf_sensor *sens_cpu_amps[NR_CHIPS]; +static struct wf_sensor *backside_temp; +static struct wf_sensor *drives_temp; + +static struct wf_control *cpu_front_fans[NR_CHIPS]; +static struct wf_control *cpu_rear_fans[NR_CHIPS]; +static struct wf_control *cpu_pumps[NR_CHIPS]; +static struct wf_control *backside_fan; +static struct wf_control *drives_fan; +static struct wf_control *slots_fan; +static struct wf_control *cpufreq_clamp; + +/* We keep a temperature history for average calculation of 180s */ +#define CPU_TEMP_HIST_SIZE 180 + +/* Fixed speed for slot fan */ +#define SLOTS_FAN_DEFAULT_PWM 40 + +/* Scale value for CPU intake fans */ +#define CPU_INTAKE_SCALE 0x0000f852 + +/* PID loop state */ +static const struct mpu_data *cpu_mpu_data[NR_CHIPS]; +static struct wf_cpu_pid_state cpu_pid[NR_CHIPS]; +static bool cpu_pid_combined; +static u32 cpu_thist[CPU_TEMP_HIST_SIZE]; +static int cpu_thist_pt; +static s64 cpu_thist_total; +static s32 cpu_all_tmax = 100 << 16; +static struct wf_pid_state backside_pid; +static int backside_tick; +static struct wf_pid_state drives_pid; +static int drives_tick; + +static int nr_chips; +static bool have_all_controls; +static bool have_all_sensors; +static bool started; + +static int failure_state; +#define FAILURE_SENSOR 1 +#define FAILURE_FAN 2 +#define FAILURE_PERM 4 +#define FAILURE_LOW_OVERTEMP 8 +#define FAILURE_HIGH_OVERTEMP 16 + +/* Overtemp values */ +#define LOW_OVER_AVERAGE 0 +#define LOW_OVER_IMMEDIATE (10 << 16) +#define LOW_OVER_CLEAR ((-10) << 16) +#define HIGH_OVER_IMMEDIATE (14 << 16) +#define HIGH_OVER_AVERAGE (10 << 16) +#define HIGH_OVER_IMMEDIATE (14 << 16) + + +static void cpu_max_all_fans(void) +{ + int i; + + /* We max all CPU fans in case of a sensor error. We also do the + * cpufreq clamping now, even if it's supposedly done later by the + * generic code anyway, we do it earlier here to react faster + */ + if (cpufreq_clamp) + wf_control_set_max(cpufreq_clamp); + for (i = 0; i < nr_chips; i++) { + if (cpu_front_fans[i]) + wf_control_set_max(cpu_front_fans[i]); + if (cpu_rear_fans[i]) + wf_control_set_max(cpu_rear_fans[i]); + if (cpu_pumps[i]) + wf_control_set_max(cpu_pumps[i]); + } +} + +static int cpu_check_overtemp(s32 temp) +{ + int new_state = 0; + s32 t_avg, t_old; + static bool first = true; + + /* First check for immediate overtemps */ + if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) { + new_state |= FAILURE_LOW_OVERTEMP; + if ((failure_state & FAILURE_LOW_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Overtemp due to immediate CPU" + " temperature !\n"); + } + if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) { + new_state |= FAILURE_HIGH_OVERTEMP; + if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Critical overtemp due to" + " immediate CPU temperature !\n"); + } + + /* + * The first time around, initialize the array with the first + * temperature reading + */ + if (first) { + int i; + + cpu_thist_total = 0; + for (i = 0; i < CPU_TEMP_HIST_SIZE; i++) { + cpu_thist[i] = temp; + cpu_thist_total += temp; + } + first = false; + } + + /* + * We calculate a history of max temperatures and use that for the + * overtemp management + */ + t_old = cpu_thist[cpu_thist_pt]; + cpu_thist[cpu_thist_pt] = temp; + cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE; + cpu_thist_total -= t_old; + cpu_thist_total += temp; + t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE; + + DBG_LOTS(" t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n", + FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp)); + + /* Now check for average overtemps */ + if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) { + new_state |= FAILURE_LOW_OVERTEMP; + if ((failure_state & FAILURE_LOW_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Overtemp due to average CPU" + " temperature !\n"); + } + if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) { + new_state |= FAILURE_HIGH_OVERTEMP; + if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Critical overtemp due to" + " average CPU temperature !\n"); + } + + /* Now handle overtemp conditions. We don't currently use the windfarm + * overtemp handling core as it's not fully suited to the needs of those + * new machine. This will be fixed later. + */ + if (new_state) { + /* High overtemp -> immediate shutdown */ + if (new_state & FAILURE_HIGH_OVERTEMP) + machine_power_off(); + if ((failure_state & new_state) != new_state) + cpu_max_all_fans(); + failure_state |= new_state; + } else if ((failure_state & FAILURE_LOW_OVERTEMP) && + (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) { + printk(KERN_ERR "windfarm: Overtemp condition cleared !\n"); + failure_state &= ~FAILURE_LOW_OVERTEMP; + } + + return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP); +} + +static int read_one_cpu_vals(int cpu, s32 *temp, s32 *power) +{ + s32 dtemp, volts, amps; + int rc; + + /* Get diode temperature */ + rc = wf_sensor_get(sens_cpu_temp[cpu], &dtemp); + if (rc) { + DBG(" CPU%d: temp reading error !\n", cpu); + return -EIO; + } + DBG_LOTS(" CPU%d: temp = %d.%03d\n", cpu, FIX32TOPRINT((dtemp))); + *temp = dtemp; + + /* Get voltage */ + rc = wf_sensor_get(sens_cpu_volts[cpu], &volts); + if (rc) { + DBG(" CPU%d, volts reading error !\n", cpu); + return -EIO; + } + DBG_LOTS(" CPU%d: volts = %d.%03d\n", cpu, FIX32TOPRINT((volts))); + + /* Get current */ + rc = wf_sensor_get(sens_cpu_amps[cpu], &s); + if (rc) { + DBG(" CPU%d, current reading error !\n", cpu); + return -EIO; + } + DBG_LOTS(" CPU%d: amps = %d.%03d\n", cpu, FIX32TOPRINT((amps))); + + /* Calculate power */ + + /* Scale voltage and current raw sensor values according to fixed scales + * obtained in Darwin and calculate power from I and V + */ + *power = (((u64)volts) * ((u64)amps)) >> 16; + + DBG_LOTS(" CPU%d: power = %d.%03d\n", cpu, FIX32TOPRINT((*power))); + + return 0; + +} + +static void cpu_fans_tick_split(void) +{ + int err, cpu; + s32 intake, temp, power, t_max = 0; + + DBG_LOTS("* cpu fans_tick_split()\n"); + + for (cpu = 0; cpu < nr_chips; ++cpu) { + struct wf_cpu_pid_state *sp = &cpu_pid[cpu]; + + /* Read current speed */ + wf_control_get(cpu_rear_fans[cpu], &sp->target); + + DBG_LOTS(" CPU%d: cur_target = %d RPM\n", cpu, sp->target); + + err = read_one_cpu_vals(cpu, &temp, &power); + if (err) { + failure_state |= FAILURE_SENSOR; + cpu_max_all_fans(); + return; + } + + /* Keep track of highest temp */ + t_max = max(t_max, temp); + + /* Handle possible overtemps */ + if (cpu_check_overtemp(t_max)) + return; + + /* Run PID */ + wf_cpu_pid_run(sp, power, temp); + + DBG_LOTS(" CPU%d: target = %d RPM\n", cpu, sp->target); + + /* Apply result directly to exhaust fan */ + err = wf_control_set(cpu_rear_fans[cpu], sp->target); + if (err) { + pr_warning("wf_pm72: Fan %s reports error %d\n", + cpu_rear_fans[cpu]->name, err); + failure_state |= FAILURE_FAN; + break; + } + + /* Scale result for intake fan */ + intake = (sp->target * CPU_INTAKE_SCALE) >> 16; + DBG_LOTS(" CPU%d: intake = %d RPM\n", cpu, intake); + err = wf_control_set(cpu_front_fans[cpu], intake); + if (err) { + pr_warning("wf_pm72: Fan %s reports error %d\n", + cpu_front_fans[cpu]->name, err); + failure_state |= FAILURE_FAN; + break; + } + } +} + +static void cpu_fans_tick_combined(void) +{ + s32 temp0, power0, temp1, power1, t_max = 0; + s32 temp, power, intake, pump; + struct wf_control *pump0, *pump1; + struct wf_cpu_pid_state *sp = &cpu_pid[0]; + int err, cpu; + + DBG_LOTS("* cpu fans_tick_combined()\n"); + + /* Read current speed from cpu 0 */ + wf_control_get(cpu_rear_fans[0], &sp->target); + + DBG_LOTS(" CPUs: cur_target = %d RPM\n", sp->target); + + /* Read values for both CPUs */ + err = read_one_cpu_vals(0, &temp0, &power0); + if (err) { + failure_state |= FAILURE_SENSOR; + cpu_max_all_fans(); + return; + } + err = read_one_cpu_vals(1, &temp1, &power1); + if (err) { + failure_state |= FAILURE_SENSOR; + cpu_max_all_fans(); + return; + } + + /* Keep track of highest temp */ + t_max = max(t_max, max(temp0, temp1)); + + /* Handle possible overtemps */ + if (cpu_check_overtemp(t_max)) + return; + + /* Use the max temp & power of both */ + temp = max(temp0, temp1); + power = max(power0, power1); + + /* Run PID */ + wf_cpu_pid_run(sp, power, temp); + + /* Scale result for intake fan */ + intake = (sp->target * CPU_INTAKE_SCALE) >> 16; + + /* Same deal with pump speed */ + pump0 = cpu_pumps[0]; + pump1 = cpu_pumps[1]; + if (!pump0) { + pump0 = pump1; + pump1 = NULL; + } + pump = (sp->target * wf_control_get_max(pump0)) / + cpu_mpu_data[0]->rmaxn_exhaust_fan; + + DBG_LOTS(" CPUs: target = %d RPM\n", sp->target); + DBG_LOTS(" CPUs: intake = %d RPM\n", intake); + DBG_LOTS(" CPUs: pump = %d RPM\n", pump); + + for (cpu = 0; cpu < nr_chips; cpu++) { + err = wf_control_set(cpu_rear_fans[cpu], sp->target); + if (err) { + pr_warning("wf_pm72: Fan %s reports error %d\n", + cpu_rear_fans[cpu]->name, err); + failure_state |= FAILURE_FAN; + } + err = wf_control_set(cpu_front_fans[cpu], intake); + if (err) { + pr_warning("wf_pm72: Fan %s reports error %d\n", + cpu_front_fans[cpu]->name, err); + failure_state |= FAILURE_FAN; + } + err = 0; + if (cpu_pumps[cpu]) + err = wf_control_set(cpu_pumps[cpu], pump); + if (err) { + pr_warning("wf_pm72: Pump %s reports error %d\n", + cpu_pumps[cpu]->name, err); + failure_state |= FAILURE_FAN; + } + } +} + +/* Implementation... */ +static int cpu_setup_pid(int cpu) +{ + struct wf_cpu_pid_param pid; + const struct mpu_data *mpu = cpu_mpu_data[cpu]; + s32 tmax, ttarget, ptarget; + int fmin, fmax, hsize; + + /* Get PID params from the appropriate MPU EEPROM */ + tmax = mpu->tmax << 16; + ttarget = mpu->ttarget << 16; + ptarget = ((s32)(mpu->pmaxh - mpu->padjmax)) << 16; + + DBG("wf_72: CPU%d ttarget = %d.%03d, tmax = %d.%03d\n", + cpu, FIX32TOPRINT(ttarget), FIX32TOPRINT(tmax)); + + /* We keep a global tmax for overtemp calculations */ + if (tmax < cpu_all_tmax) + cpu_all_tmax = tmax; + + /* Set PID min/max by using the rear fan min/max */ + fmin = wf_control_get_min(cpu_rear_fans[cpu]); + fmax = wf_control_get_max(cpu_rear_fans[cpu]); + DBG("wf_72: CPU%d max RPM range = [%d..%d]\n", cpu, fmin, fmax); + + /* History size */ + hsize = min_t(int, mpu->tguardband, WF_PID_MAX_HISTORY); + DBG("wf_72: CPU%d history size = %d\n", cpu, hsize); + + /* Initialize PID loop */ + pid.interval = 1; /* seconds */ + pid.history_len = hsize; + pid.gd = mpu->pid_gd; + pid.gp = mpu->pid_gp; + pid.gr = mpu->pid_gr; + pid.tmax = tmax; + pid.ttarget = ttarget; + pid.pmaxadj = ptarget; + pid.min = fmin; + pid.max = fmax; + + wf_cpu_pid_init(&cpu_pid[cpu], &pid); + cpu_pid[cpu].target = 1000; + + return 0; +} + +/* Backside/U3 fan */ +static struct wf_pid_param backside_u3_param = { + .interval = 5, + .history_len = 2, + .gd = 40 << 20, + .gp = 5 << 20, + .gr = 0, + .itarget = 65 << 16, + .additive = 1, + .min = 20, + .max = 100, +}; + +static struct wf_pid_param backside_u3h_param = { + .interval = 5, + .history_len = 2, + .gd = 20 << 20, + .gp = 5 << 20, + .gr = 0, + .itarget = 75 << 16, + .additive = 1, + .min = 20, + .max = 100, +}; + +static void backside_fan_tick(void) +{ + s32 temp; + int speed; + int err; + + if (!backside_fan || !backside_temp || !backside_tick) + return; + if (--backside_tick > 0) + return; + backside_tick = backside_pid.param.interval; + + DBG_LOTS("* backside fans tick\n"); + + /* Update fan speed from actual fans */ + err = wf_control_get(backside_fan, &speed); + if (!err) + backside_pid.target = speed; + + err = wf_sensor_get(backside_temp, &temp); + if (err) { + printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n", + err); + failure_state |= FAILURE_SENSOR; + wf_control_set_max(backside_fan); + return; + } + speed = wf_pid_run(&backside_pid, temp); + + DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n", + FIX32TOPRINT(temp), speed); + + err = wf_control_set(backside_fan, speed); + if (err) { + printk(KERN_WARNING "windfarm: backside fan error %d\n", err); + failure_state |= FAILURE_FAN; + } +} + +static void backside_setup_pid(void) +{ + /* first time initialize things */ + s32 fmin = wf_control_get_min(backside_fan); + s32 fmax = wf_control_get_max(backside_fan); + struct wf_pid_param param; + struct device_node *u3; + int u3h = 1; /* conservative by default */ + + u3 = of_find_node_by_path("/u3@0,f8000000"); + if (u3 != NULL) { + const u32 *vers = of_get_property(u3, "device-rev", NULL); + if (vers) + if (((*vers) & 0x3f) < 0x34) + u3h = 0; + of_node_put(u3); + } + + param = u3h ? backside_u3h_param : backside_u3_param; + + param.min = max(param.min, fmin); + param.max = min(param.max, fmax); + wf_pid_init(&backside_pid, ¶m); + backside_tick = 1; + + pr_info("wf_pm72: Backside control loop started.\n"); +} + +/* Drive bay fan */ +static const struct wf_pid_param drives_param = { + .interval = 5, + .history_len = 2, + .gd = 30 << 20, + .gp = 5 << 20, + .gr = 0, + .itarget = 40 << 16, + .additive = 1, + .min = 300, + .max = 4000, +}; + +static void drives_fan_tick(void) +{ + s32 temp; + int speed; + int err; + + if (!drives_fan || !drives_temp || !drives_tick) + return; + if (--drives_tick > 0) + return; + drives_tick = drives_pid.param.interval; + + DBG_LOTS("* drives fans tick\n"); + + /* Update fan speed from actual fans */ + err = wf_control_get(drives_fan, &speed); + if (!err) + drives_pid.target = speed; + + err = wf_sensor_get(drives_temp, &temp); + if (err) { + pr_warning("wf_pm72: drive bay temp sensor error %d\n", err); + failure_state |= FAILURE_SENSOR; + wf_control_set_max(drives_fan); + return; + } + speed = wf_pid_run(&drives_pid, temp); + + DBG_LOTS("drives PID temp=%d.%.3d speed=%d\n", + FIX32TOPRINT(temp), speed); + + err = wf_control_set(drives_fan, speed); + if (err) { + printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err); + failure_state |= FAILURE_FAN; + } +} + +static void drives_setup_pid(void) +{ + /* first time initialize things */ + s32 fmin = wf_control_get_min(drives_fan); + s32 fmax = wf_control_get_max(drives_fan); + struct wf_pid_param param = drives_param; + + param.min = max(param.min, fmin); + param.max = min(param.max, fmax); + wf_pid_init(&drives_pid, ¶m); + drives_tick = 1; + + pr_info("wf_pm72: Drive bay control loop started.\n"); +} + +static void set_fail_state(void) +{ + cpu_max_all_fans(); + + if (backside_fan) + wf_control_set_max(backside_fan); + if (slots_fan) + wf_control_set_max(slots_fan); + if (drives_fan) + wf_control_set_max(drives_fan); +} + +static void pm72_tick(void) +{ + int i, last_failure; + + if (!started) { + started = 1; + printk(KERN_INFO "windfarm: CPUs control loops started.\n"); + for (i = 0; i < nr_chips; ++i) { + if (cpu_setup_pid(i) < 0) { + failure_state = FAILURE_PERM; + set_fail_state(); + break; + } + } + DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax)); + + backside_setup_pid(); + drives_setup_pid(); + + /* + * We don't have the right stuff to drive the PCI fan + * so we fix it to a default value + */ + wf_control_set(slots_fan, SLOTS_FAN_DEFAULT_PWM); + +#ifdef HACKED_OVERTEMP + cpu_all_tmax = 60 << 16; +#endif + } + + /* Permanent failure, bail out */ + if (failure_state & FAILURE_PERM) + return; + + /* + * Clear all failure bits except low overtemp which will be eventually + * cleared by the control loop itself + */ + last_failure = failure_state; + failure_state &= FAILURE_LOW_OVERTEMP; + if (cpu_pid_combined) + cpu_fans_tick_combined(); + else + cpu_fans_tick_split(); + backside_fan_tick(); + drives_fan_tick(); + + DBG_LOTS(" last_failure: 0x%x, failure_state: %x\n", + last_failure, failure_state); + + /* Check for failures. Any failure causes cpufreq clamping */ + if (failure_state && last_failure == 0 && cpufreq_clamp) + wf_control_set_max(cpufreq_clamp); + if (failure_state == 0 && last_failure && cpufreq_clamp) + wf_control_set_min(cpufreq_clamp); + + /* That's it for now, we might want to deal with other failures + * differently in the future though + */ +} + +static void pm72_new_control(struct wf_control *ct) +{ + bool all_controls; + bool had_pump = cpu_pumps[0] || cpu_pumps[1]; + + if (!strcmp(ct->name, "cpu-front-fan-0")) + cpu_front_fans[0] = ct; + else if (!strcmp(ct->name, "cpu-front-fan-1")) + cpu_front_fans[1] = ct; + else if (!strcmp(ct->name, "cpu-rear-fan-0")) + cpu_rear_fans[0] = ct; + else if (!strcmp(ct->name, "cpu-rear-fan-1")) + cpu_rear_fans[1] = ct; + else if (!strcmp(ct->name, "cpu-pump-0")) + cpu_pumps[0] = ct; + else if (!strcmp(ct->name, "cpu-pump-1")) + cpu_pumps[1] = ct; + else if (!strcmp(ct->name, "backside-fan")) + backside_fan = ct; + else if (!strcmp(ct->name, "slots-fan")) + slots_fan = ct; + else if (!strcmp(ct->name, "drive-bay-fan")) + drives_fan = ct; + else if (!strcmp(ct->name, "cpufreq-clamp")) + cpufreq_clamp = ct; + + all_controls = + cpu_front_fans[0] && + cpu_rear_fans[0] && + backside_fan && + slots_fan && + drives_fan; + if (nr_chips > 1) + all_controls &= + cpu_front_fans[1] && + cpu_rear_fans[1]; + have_all_controls = all_controls; + + if ((cpu_pumps[0] || cpu_pumps[1]) && !had_pump) { + pr_info("wf_pm72: Liquid cooling pump(s) detected," + " using new algorithm !\n"); + cpu_pid_combined = true; + } +} + + +static void pm72_new_sensor(struct wf_sensor *sr) +{ + bool all_sensors; + + if (!strcmp(sr->name, "cpu-diode-temp-0")) + sens_cpu_temp[0] = sr; + else if (!strcmp(sr->name, "cpu-diode-temp-1")) + sens_cpu_temp[1] = sr; + else if (!strcmp(sr->name, "cpu-voltage-0")) + sens_cpu_volts[0] = sr; + else if (!strcmp(sr->name, "cpu-voltage-1")) + sens_cpu_volts[1] = sr; + else if (!strcmp(sr->name, "cpu-current-0")) + sens_cpu_amps[0] = sr; + else if (!strcmp(sr->name, "cpu-current-1")) + sens_cpu_amps[1] = sr; + else if (!strcmp(sr->name, "backside-temp")) + backside_temp = sr; + else if (!strcmp(sr->name, "hd-temp")) + drives_temp = sr; + + all_sensors = + sens_cpu_temp[0] && + sens_cpu_volts[0] && + sens_cpu_amps[0] && + backside_temp && + drives_temp; + if (nr_chips > 1) + all_sensors &= + sens_cpu_temp[1] && + sens_cpu_volts[1] && + sens_cpu_amps[1]; + + have_all_sensors = all_sensors; +} + +static int pm72_wf_notify(struct notifier_block *self, + unsigned long event, void *data) +{ + switch (event) { + case WF_EVENT_NEW_SENSOR: + pm72_new_sensor(data); + break; + case WF_EVENT_NEW_CONTROL: + pm72_new_control(data); + break; + case WF_EVENT_TICK: + if (have_all_controls && have_all_sensors) + pm72_tick(); + } + return 0; +} + +static struct notifier_block pm72_events = { + .notifier_call = pm72_wf_notify, +}; + +static int wf_pm72_probe(struct platform_device *dev) +{ + wf_register_client(&pm72_events); + return 0; +} + +static int __devexit wf_pm72_remove(struct platform_device *dev) +{ + wf_unregister_client(&pm72_events); + + /* should release all sensors and controls */ + return 0; +} + +static struct platform_driver wf_pm72_driver = { + .probe = wf_pm72_probe, + .remove = wf_pm72_remove, + .driver = { + .name = "windfarm", + .owner = THIS_MODULE, + }, +}; + +static int __init wf_pm72_init(void) +{ + struct device_node *cpu; + int i; + + if (!of_machine_is_compatible("PowerMac7,2") && + !of_machine_is_compatible("PowerMac7,3")) + return -ENODEV; + + /* Count the number of CPU cores */ + nr_chips = 0; + for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; ) + ++nr_chips; + if (nr_chips > NR_CHIPS) + nr_chips = NR_CHIPS; + + pr_info("windfarm: Initializing for desktop G5 with %d chips\n", + nr_chips); + + /* Get MPU data for each CPU */ + for (i = 0; i < nr_chips; i++) { + cpu_mpu_data[i] = wf_get_mpu(i); + if (!cpu_mpu_data[i]) { + pr_err("wf_pm72: Failed to find MPU data for CPU %d\n", i); + return -ENXIO; + } + } + +#ifdef MODULE + request_module("windfarm_fcu_controls"); + request_module("windfarm_lm75_sensor"); + request_module("windfarm_ad7417_sensor"); + request_module("windfarm_max6690_sensor"); + request_module("windfarm_cpufreq_clamp"); +#endif /* MODULE */ + + platform_driver_register(&wf_pm72_driver); + return 0; +} + +static void __exit wf_pm72_exit(void) +{ + platform_driver_unregister(&wf_pm72_driver); +} + +module_init(wf_pm72_init); +module_exit(wf_pm72_exit); + +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("Thermal control for AGP PowerMac G5s"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:windfarm"); diff --git a/drivers/macintosh/windfarm_rm31.c b/drivers/macintosh/windfarm_rm31.c new file mode 100644 index 000000000000..3eca6d4b52fc --- /dev/null +++ b/drivers/macintosh/windfarm_rm31.c @@ -0,0 +1,740 @@ +/* + * Windfarm PowerMac thermal control. + * Control loops for RackMack3,1 (Xserve G5) + * + * Copyright (C) 2012 Benjamin Herrenschmidt, IBM Corp. + * + * Use and redistribute under the terms of the GNU GPL v2. + */ +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <asm/prom.h> +#include <asm/smu.h> + +#include "windfarm.h" +#include "windfarm_pid.h" +#include "windfarm_mpu.h" + +#define VERSION "1.0" + +#undef DEBUG +#undef LOTSA_DEBUG + +#ifdef DEBUG +#define DBG(args...) printk(args) +#else +#define DBG(args...) do { } while(0) +#endif + +#ifdef LOTSA_DEBUG +#define DBG_LOTS(args...) printk(args) +#else +#define DBG_LOTS(args...) do { } while(0) +#endif + +/* define this to force CPU overtemp to 60 degree, useful for testing + * the overtemp code + */ +#undef HACKED_OVERTEMP + +/* We currently only handle 2 chips */ +#define NR_CHIPS 2 +#define NR_CPU_FANS 3 * NR_CHIPS + +/* Controls and sensors */ +static struct wf_sensor *sens_cpu_temp[NR_CHIPS]; +static struct wf_sensor *sens_cpu_volts[NR_CHIPS]; +static struct wf_sensor *sens_cpu_amps[NR_CHIPS]; +static struct wf_sensor *backside_temp; +static struct wf_sensor *slots_temp; +static struct wf_sensor *dimms_temp; + +static struct wf_control *cpu_fans[NR_CHIPS][3]; +static struct wf_control *backside_fan; +static struct wf_control *slots_fan; +static struct wf_control *cpufreq_clamp; + +/* We keep a temperature history for average calculation of 180s */ +#define CPU_TEMP_HIST_SIZE 180 + +/* PID loop state */ +static const struct mpu_data *cpu_mpu_data[NR_CHIPS]; +static struct wf_cpu_pid_state cpu_pid[NR_CHIPS]; +static u32 cpu_thist[CPU_TEMP_HIST_SIZE]; +static int cpu_thist_pt; +static s64 cpu_thist_total; +static s32 cpu_all_tmax = 100 << 16; +static struct wf_pid_state backside_pid; +static int backside_tick; +static struct wf_pid_state slots_pid; +static int slots_tick; +static int slots_speed; +static struct wf_pid_state dimms_pid; +static int dimms_output_clamp; + +static int nr_chips; +static bool have_all_controls; +static bool have_all_sensors; +static bool started; + +static int failure_state; +#define FAILURE_SENSOR 1 +#define FAILURE_FAN 2 +#define FAILURE_PERM 4 +#define FAILURE_LOW_OVERTEMP 8 +#define FAILURE_HIGH_OVERTEMP 16 + +/* Overtemp values */ +#define LOW_OVER_AVERAGE 0 +#define LOW_OVER_IMMEDIATE (10 << 16) +#define LOW_OVER_CLEAR ((-10) << 16) +#define HIGH_OVER_IMMEDIATE (14 << 16) +#define HIGH_OVER_AVERAGE (10 << 16) +#define HIGH_OVER_IMMEDIATE (14 << 16) + + +static void cpu_max_all_fans(void) +{ + int i; + + /* We max all CPU fans in case of a sensor error. We also do the + * cpufreq clamping now, even if it's supposedly done later by the + * generic code anyway, we do it earlier here to react faster + */ + if (cpufreq_clamp) + wf_control_set_max(cpufreq_clamp); + for (i = 0; i < nr_chips; i++) { + if (cpu_fans[i][0]) + wf_control_set_max(cpu_fans[i][0]); + if (cpu_fans[i][1]) + wf_control_set_max(cpu_fans[i][1]); + if (cpu_fans[i][2]) + wf_control_set_max(cpu_fans[i][2]); + } +} + +static int cpu_check_overtemp(s32 temp) +{ + int new_state = 0; + s32 t_avg, t_old; + static bool first = true; + + /* First check for immediate overtemps */ + if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) { + new_state |= FAILURE_LOW_OVERTEMP; + if ((failure_state & FAILURE_LOW_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Overtemp due to immediate CPU" + " temperature !\n"); + } + if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) { + new_state |= FAILURE_HIGH_OVERTEMP; + if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Critical overtemp due to" + " immediate CPU temperature !\n"); + } + + /* + * The first time around, initialize the array with the first + * temperature reading + */ + if (first) { + int i; + + cpu_thist_total = 0; + for (i = 0; i < CPU_TEMP_HIST_SIZE; i++) { + cpu_thist[i] = temp; + cpu_thist_total += temp; + } + first = false; + } + + /* + * We calculate a history of max temperatures and use that for the + * overtemp management + */ + t_old = cpu_thist[cpu_thist_pt]; + cpu_thist[cpu_thist_pt] = temp; + cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE; + cpu_thist_total -= t_old; + cpu_thist_total += temp; + t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE; + + DBG_LOTS(" t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n", + FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp)); + + /* Now check for average overtemps */ + if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) { + new_state |= FAILURE_LOW_OVERTEMP; + if ((failure_state & FAILURE_LOW_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Overtemp due to average CPU" + " temperature !\n"); + } + if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) { + new_state |= FAILURE_HIGH_OVERTEMP; + if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0) + printk(KERN_ERR "windfarm: Critical overtemp due to" + " average CPU temperature !\n"); + } + + /* Now handle overtemp conditions. We don't currently use the windfarm + * overtemp handling core as it's not fully suited to the needs of those + * new machine. This will be fixed later. + */ + if (new_state) { + /* High overtemp -> immediate shutdown */ + if (new_state & FAILURE_HIGH_OVERTEMP) + machine_power_off(); + if ((failure_state & new_state) != new_state) + cpu_max_all_fans(); + failure_state |= new_state; + } else if ((failure_state & FAILURE_LOW_OVERTEMP) && + (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) { + printk(KERN_ERR "windfarm: Overtemp condition cleared !\n"); + failure_state &= ~FAILURE_LOW_OVERTEMP; + } + + return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP); +} + +static int read_one_cpu_vals(int cpu, s32 *temp, s32 *power) +{ + s32 dtemp, volts, amps; + int rc; + + /* Get diode temperature */ + rc = wf_sensor_get(sens_cpu_temp[cpu], &dtemp); + if (rc) { + DBG(" CPU%d: temp reading error !\n", cpu); + return -EIO; + } + DBG_LOTS(" CPU%d: temp = %d.%03d\n", cpu, FIX32TOPRINT((dtemp))); + *temp = dtemp; + + /* Get voltage */ + rc = wf_sensor_get(sens_cpu_volts[cpu], &volts); + if (rc) { + DBG(" CPU%d, volts reading error !\n", cpu); + return -EIO; + } + DBG_LOTS(" CPU%d: volts = %d.%03d\n", cpu, FIX32TOPRINT((volts))); + + /* Get current */ + rc = wf_sensor_get(sens_cpu_amps[cpu], &s); + if (rc) { + DBG(" CPU%d, current reading error !\n", cpu); + return -EIO; + } + DBG_LOTS(" CPU%d: amps = %d.%03d\n", cpu, FIX32TOPRINT((amps))); + + /* Calculate power */ + + /* Scale voltage and current raw sensor values according to fixed scales + * obtained in Darwin and calculate power from I and V + */ + *power = (((u64)volts) * ((u64)amps)) >> 16; + + DBG_LOTS(" CPU%d: power = %d.%03d\n", cpu, FIX32TOPRINT((*power))); + + return 0; + +} + +static void cpu_fans_tick(void) +{ + int err, cpu, i; + s32 speed, temp, power, t_max = 0; + + DBG_LOTS("* cpu fans_tick_split()\n"); + + for (cpu = 0; cpu < nr_chips; ++cpu) { + struct wf_cpu_pid_state *sp = &cpu_pid[cpu]; + + /* Read current speed */ + wf_control_get(cpu_fans[cpu][0], &sp->target); + + err = read_one_cpu_vals(cpu, &temp, &power); + if (err) { + failure_state |= FAILURE_SENSOR; + cpu_max_all_fans(); + return; + } + + /* Keep track of highest temp */ + t_max = max(t_max, temp); + + /* Handle possible overtemps */ + if (cpu_check_overtemp(t_max)) + return; + + /* Run PID */ + wf_cpu_pid_run(sp, power, temp); + + DBG_LOTS(" CPU%d: target = %d RPM\n", cpu, sp->target); + + /* Apply DIMMs clamp */ + speed = max(sp->target, dimms_output_clamp); + + /* Apply result to all cpu fans */ + for (i = 0; i < 3; i++) { + err = wf_control_set(cpu_fans[cpu][i], speed); + if (err) { + pr_warning("wf_rm31: Fan %s reports error %d\n", + cpu_fans[cpu][i]->name, err); + failure_state |= FAILURE_FAN; + } + } + } +} + +/* Implementation... */ +static int cpu_setup_pid(int cpu) +{ + struct wf_cpu_pid_param pid; + const struct mpu_data *mpu = cpu_mpu_data[cpu]; + s32 tmax, ttarget, ptarget; + int fmin, fmax, hsize; + + /* Get PID params from the appropriate MPU EEPROM */ + tmax = mpu->tmax << 16; + ttarget = mpu->ttarget << 16; + ptarget = ((s32)(mpu->pmaxh - mpu->padjmax)) << 16; + + DBG("wf_72: CPU%d ttarget = %d.%03d, tmax = %d.%03d\n", + cpu, FIX32TOPRINT(ttarget), FIX32TOPRINT(tmax)); + + /* We keep a global tmax for overtemp calculations */ + if (tmax < cpu_all_tmax) + cpu_all_tmax = tmax; + + /* Set PID min/max by using the rear fan min/max */ + fmin = wf_control_get_min(cpu_fans[cpu][0]); + fmax = wf_control_get_max(cpu_fans[cpu][0]); + DBG("wf_72: CPU%d max RPM range = [%d..%d]\n", cpu, fmin, fmax); + + /* History size */ + hsize = min_t(int, mpu->tguardband, WF_PID_MAX_HISTORY); + DBG("wf_72: CPU%d history size = %d\n", cpu, hsize); + + /* Initialize PID loop */ + pid.interval = 1; /* seconds */ + pid.history_len = hsize; + pid.gd = mpu->pid_gd; + pid.gp = mpu->pid_gp; + pid.gr = mpu->pid_gr; + pid.tmax = tmax; + pid.ttarget = ttarget; + pid.pmaxadj = ptarget; + pid.min = fmin; + pid.max = fmax; + + wf_cpu_pid_init(&cpu_pid[cpu], &pid); + cpu_pid[cpu].target = 4000; + + return 0; +} + +/* Backside/U3 fan */ +static struct wf_pid_param backside_param = { + .interval = 1, + .history_len = 2, + .gd = 0x00500000, + .gp = 0x0004cccc, + .gr = 0, + .itarget = 70 << 16, + .additive = 0, + .min = 20, + .max = 100, +}; + +/* DIMMs temperature (clamp the backside fan) */ +static struct wf_pid_param dimms_param = { + .interval = 1, + .history_len = 20, + .gd = 0, + .gp = 0, + .gr = 0x06553600, + .itarget = 50 << 16, + .additive = 0, + .min = 4000, + .max = 14000, +}; + +static void backside_fan_tick(void) +{ + s32 temp, dtemp; + int speed, dspeed, fan_min; + int err; + + if (!backside_fan || !backside_temp || !dimms_temp || !backside_tick) + return; + if (--backside_tick > 0) + return; + backside_tick = backside_pid.param.interval; + + DBG_LOTS("* backside fans tick\n"); + + /* Update fan speed from actual fans */ + err = wf_control_get(backside_fan, &speed); + if (!err) + backside_pid.target = speed; + + err = wf_sensor_get(backside_temp, &temp); + if (err) { + printk(KERN_WARNING "windfarm: U3 temp sensor error %d\n", + err); + failure_state |= FAILURE_SENSOR; + wf_control_set_max(backside_fan); + return; + } + speed = wf_pid_run(&backside_pid, temp); + + DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n", + FIX32TOPRINT(temp), speed); + + err = wf_sensor_get(dimms_temp, &dtemp); + if (err) { + printk(KERN_WARNING "windfarm: DIMMs temp sensor error %d\n", + err); + failure_state |= FAILURE_SENSOR; + wf_control_set_max(backside_fan); + return; + } + dspeed = wf_pid_run(&dimms_pid, dtemp); + dimms_output_clamp = dspeed; + + fan_min = (dspeed * 100) / 14000; + fan_min = max(fan_min, backside_param.min); + speed = max(speed, fan_min); + + err = wf_control_set(backside_fan, speed); + if (err) { + printk(KERN_WARNING "windfarm: backside fan error %d\n", err); + failure_state |= FAILURE_FAN; + } +} + +static void backside_setup_pid(void) +{ + /* first time initialize things */ + s32 fmin = wf_control_get_min(backside_fan); + s32 fmax = wf_control_get_max(backside_fan); + struct wf_pid_param param; + + param = backside_param; + param.min = max(param.min, fmin); + param.max = min(param.max, fmax); + wf_pid_init(&backside_pid, ¶m); + + param = dimms_param; + wf_pid_init(&dimms_pid, ¶m); + + backside_tick = 1; + + pr_info("wf_rm31: Backside control loop started.\n"); +} + +/* Slots fan */ +static const struct wf_pid_param slots_param = { + .interval = 5, + .history_len = 2, + .gd = 30 << 20, + .gp = 5 << 20, + .gr = 0, + .itarget = 40 << 16, + .additive = 1, + .min = 300, + .max = 4000, +}; + +static void slots_fan_tick(void) +{ + s32 temp; + int speed; + int err; + + if (!slots_fan || !slots_temp || !slots_tick) + return; + if (--slots_tick > 0) + return; + slots_tick = slots_pid.param.interval; + + DBG_LOTS("* slots fans tick\n"); + + err = wf_sensor_get(slots_temp, &temp); + if (err) { + pr_warning("wf_rm31: slots temp sensor error %d\n", err); + failure_state |= FAILURE_SENSOR; + wf_control_set_max(slots_fan); + return; + } + speed = wf_pid_run(&slots_pid, temp); + + DBG_LOTS("slots PID temp=%d.%.3d speed=%d\n", + FIX32TOPRINT(temp), speed); + + slots_speed = speed; + err = wf_control_set(slots_fan, speed); + if (err) { + printk(KERN_WARNING "windfarm: slots bay fan error %d\n", err); + failure_state |= FAILURE_FAN; + } +} + +static void slots_setup_pid(void) +{ + /* first time initialize things */ + s32 fmin = wf_control_get_min(slots_fan); + s32 fmax = wf_control_get_max(slots_fan); + struct wf_pid_param param = slots_param; + + param.min = max(param.min, fmin); + param.max = min(param.max, fmax); + wf_pid_init(&slots_pid, ¶m); + slots_tick = 1; + + pr_info("wf_rm31: Slots control loop started.\n"); +} + +static void set_fail_state(void) +{ + cpu_max_all_fans(); + + if (backside_fan) + wf_control_set_max(backside_fan); + if (slots_fan) + wf_control_set_max(slots_fan); +} + +static void rm31_tick(void) +{ + int i, last_failure; + + if (!started) { + started = 1; + printk(KERN_INFO "windfarm: CPUs control loops started.\n"); + for (i = 0; i < nr_chips; ++i) { + if (cpu_setup_pid(i) < 0) { + failure_state = FAILURE_PERM; + set_fail_state(); + break; + } + } + DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax)); + + backside_setup_pid(); + slots_setup_pid(); + +#ifdef HACKED_OVERTEMP + cpu_all_tmax = 60 << 16; +#endif + } + + /* Permanent failure, bail out */ + if (failure_state & FAILURE_PERM) + return; + + /* + * Clear all failure bits except low overtemp which will be eventually + * cleared by the control loop itself + */ + last_failure = failure_state; + failure_state &= FAILURE_LOW_OVERTEMP; + backside_fan_tick(); + slots_fan_tick(); + + /* We do CPUs last because they can be clamped high by + * DIMM temperature + */ + cpu_fans_tick(); + + DBG_LOTS(" last_failure: 0x%x, failure_state: %x\n", + last_failure, failure_state); + + /* Check for failures. Any failure causes cpufreq clamping */ + if (failure_state && last_failure == 0 && cpufreq_clamp) + wf_control_set_max(cpufreq_clamp); + if (failure_state == 0 && last_failure && cpufreq_clamp) + wf_control_set_min(cpufreq_clamp); + + /* That's it for now, we might want to deal with other failures + * differently in the future though + */ +} + +static void rm31_new_control(struct wf_control *ct) +{ + bool all_controls; + + if (!strcmp(ct->name, "cpu-fan-a-0")) + cpu_fans[0][0] = ct; + else if (!strcmp(ct->name, "cpu-fan-b-0")) + cpu_fans[0][1] = ct; + else if (!strcmp(ct->name, "cpu-fan-c-0")) + cpu_fans[0][2] = ct; + else if (!strcmp(ct->name, "cpu-fan-a-1")) + cpu_fans[1][0] = ct; + else if (!strcmp(ct->name, "cpu-fan-b-1")) + cpu_fans[1][1] = ct; + else if (!strcmp(ct->name, "cpu-fan-c-1")) + cpu_fans[1][2] = ct; + else if (!strcmp(ct->name, "backside-fan")) + backside_fan = ct; + else if (!strcmp(ct->name, "slots-fan")) + slots_fan = ct; + else if (!strcmp(ct->name, "cpufreq-clamp")) + cpufreq_clamp = ct; + + all_controls = + cpu_fans[0][0] && + cpu_fans[0][1] && + cpu_fans[0][2] && + backside_fan && + slots_fan; + if (nr_chips > 1) + all_controls &= + cpu_fans[1][0] && + cpu_fans[1][1] && + cpu_fans[1][2]; + have_all_controls = all_controls; +} + + +static void rm31_new_sensor(struct wf_sensor *sr) +{ + bool all_sensors; + + if (!strcmp(sr->name, "cpu-diode-temp-0")) + sens_cpu_temp[0] = sr; + else if (!strcmp(sr->name, "cpu-diode-temp-1")) + sens_cpu_temp[1] = sr; + else if (!strcmp(sr->name, "cpu-voltage-0")) + sens_cpu_volts[0] = sr; + else if (!strcmp(sr->name, "cpu-voltage-1")) + sens_cpu_volts[1] = sr; + else if (!strcmp(sr->name, "cpu-current-0")) + sens_cpu_amps[0] = sr; + else if (!strcmp(sr->name, "cpu-current-1")) + sens_cpu_amps[1] = sr; + else if (!strcmp(sr->name, "backside-temp")) + backside_temp = sr; + else if (!strcmp(sr->name, "slots-temp")) + slots_temp = sr; + else if (!strcmp(sr->name, "dimms-temp")) + dimms_temp = sr; + + all_sensors = + sens_cpu_temp[0] && + sens_cpu_volts[0] && + sens_cpu_amps[0] && + backside_temp && + slots_temp && + dimms_temp; + if (nr_chips > 1) + all_sensors &= + sens_cpu_temp[1] && + sens_cpu_volts[1] && + sens_cpu_amps[1]; + + have_all_sensors = all_sensors; +} + +static int rm31_wf_notify(struct notifier_block *self, + unsigned long event, void *data) +{ + switch (event) { + case WF_EVENT_NEW_SENSOR: + rm31_new_sensor(data); + break; + case WF_EVENT_NEW_CONTROL: + rm31_new_control(data); + break; + case WF_EVENT_TICK: + if (have_all_controls && have_all_sensors) + rm31_tick(); + } + return 0; +} + +static struct notifier_block rm31_events = { + .notifier_call = rm31_wf_notify, +}; + +static int wf_rm31_probe(struct platform_device *dev) +{ + wf_register_client(&rm31_events); + return 0; +} + +static int __devexit wf_rm31_remove(struct platform_device *dev) +{ + wf_unregister_client(&rm31_events); + + /* should release all sensors and controls */ + return 0; +} + +static struct platform_driver wf_rm31_driver = { + .probe = wf_rm31_probe, + .remove = wf_rm31_remove, + .driver = { + .name = "windfarm", + .owner = THIS_MODULE, + }, +}; + +static int __init wf_rm31_init(void) +{ + struct device_node *cpu; + int i; + + if (!of_machine_is_compatible("RackMac3,1")) + return -ENODEV; + + /* Count the number of CPU cores */ + nr_chips = 0; + for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; ) + ++nr_chips; + if (nr_chips > NR_CHIPS) + nr_chips = NR_CHIPS; + + pr_info("windfarm: Initializing for desktop G5 with %d chips\n", + nr_chips); + + /* Get MPU data for each CPU */ + for (i = 0; i < nr_chips; i++) { + cpu_mpu_data[i] = wf_get_mpu(i); + if (!cpu_mpu_data[i]) { + pr_err("wf_rm31: Failed to find MPU data for CPU %d\n", i); + return -ENXIO; + } + } + +#ifdef MODULE + request_module("windfarm_fcu_controls"); + request_module("windfarm_lm75_sensor"); + request_module("windfarm_lm87_sensor"); + request_module("windfarm_ad7417_sensor"); + request_module("windfarm_max6690_sensor"); + request_module("windfarm_cpufreq_clamp"); +#endif /* MODULE */ + + platform_driver_register(&wf_rm31_driver); + return 0; +} + +static void __exit wf_rm31_exit(void) +{ + platform_driver_unregister(&wf_rm31_driver); +} + +module_init(wf_rm31_init); +module_exit(wf_rm31_exit); + +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("Thermal control for Xserve G5"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:windfarm"); |
