diff options
Diffstat (limited to 'drivers/macintosh/windfarm_pm81.c')
| -rw-r--r-- | drivers/macintosh/windfarm_pm81.c | 879 |
1 files changed, 879 insertions, 0 deletions
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c new file mode 100644 index 000000000000..322c74b2687f --- /dev/null +++ b/drivers/macintosh/windfarm_pm81.c @@ -0,0 +1,879 @@ +/* + * Windfarm PowerMac thermal control. iMac G5 + * + * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + * Released under the term of the GNU GPL v2. + * + * The algorithm used is the PID control algorithm, used the same + * way the published Darwin code does, using the same values that + * are present in the Darwin 8.2 snapshot property lists (note however + * that none of the code has been re-used, it's a complete re-implementation + * + * The various control loops found in Darwin config file are: + * + * PowerMac8,1 and PowerMac8,2 + * =========================== + * + * System Fans control loop. Different based on models. In addition to the + * usual PID algorithm, the control loop gets 2 additional pairs of linear + * scaling factors (scale/offsets) expressed as 4.12 fixed point values + * signed offset, unsigned scale) + * + * The targets are modified such as: + * - the linked control (second control) gets the target value as-is + * (typically the drive fan) + * - the main control (first control) gets the target value scaled with + * the first pair of factors, and is then modified as below + * - the value of the target of the CPU Fan control loop is retreived, + * scaled with the second pair of factors, and the max of that and + * the scaled target is applied to the main control. + * + * # model_id: 2 + * controls : system-fan, drive-bay-fan + * sensors : hd-temp + * PID params : G_d = 0x15400000 + * G_p = 0x00200000 + * G_r = 0x000002fd + * History = 2 entries + * Input target = 0x3a0000 + * Interval = 5s + * linear-factors : offset = 0xff38 scale = 0x0ccd + * offset = 0x0208 scale = 0x07ae + * + * # model_id: 3 + * controls : system-fan, drive-bay-fan + * sensors : hd-temp + * PID params : G_d = 0x08e00000 + * G_p = 0x00566666 + * G_r = 0x0000072b + * History = 2 entries + * Input target = 0x350000 + * Interval = 5s + * linear-factors : offset = 0xff38 scale = 0x0ccd + * offset = 0x0000 scale = 0x0000 + * + * # model_id: 5 + * controls : system-fan + * sensors : hd-temp + * PID params : G_d = 0x15400000 + * G_p = 0x00233333 + * G_r = 0x000002fd + * History = 2 entries + * Input target = 0x3a0000 + * Interval = 5s + * linear-factors : offset = 0x0000 scale = 0x1000 + * offset = 0x0091 scale = 0x0bae + * + * CPU Fan control loop. The loop is identical for all models. it + * has an additional pair of scaling factor. This is used to scale the + * systems fan control loop target result (the one before it gets scaled + * by the System Fans control loop itself). Then, the max value of the + * calculated target value and system fan value is sent to the fans + * + * controls : cpu-fan + * sensors : cpu-temp cpu-power + * PID params : From SMU sdb partition + * linear-factors : offset = 0xfb50 scale = 0x1000 + * + * CPU Slew control loop. Not implemented. The cpufreq driver in linux is + * completely separate for now, though we could find a way to link it, either + * as a client reacting to overtemp notifications, or directling monitoring + * the CPU temperature + * + * WARNING ! The CPU control loop requires the CPU tmax for the current + * operating point. However, we currently are completely separated from + * the cpufreq driver and thus do not know what the current operating + * point is. Fortunately, we also do not have any hardware supporting anything + * but operating point 0 at the moment, thus we just peek that value directly + * from the SDB partition. If we ever end up with actually slewing the system + * clock and thus changing operating points, we'll have to find a way to + * communicate with the CPU freq driver; + * + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/kmod.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/sections.h> +#include <asm/smu.h> + +#include "windfarm.h" +#include "windfarm_pid.h" + +#define VERSION "0.4" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(args...) printk(args) +#else +#define DBG(args...) do { } while(0) +#endif + +/* define this to force CPU overtemp to 74 degree, useful for testing + * the overtemp code + */ +#undef HACKED_OVERTEMP + +static int wf_smu_mach_model; /* machine model id */ + +static struct device *wf_smu_dev; + +/* Controls & sensors */ +static struct wf_sensor *sensor_cpu_power; +static struct wf_sensor *sensor_cpu_temp; +static struct wf_sensor *sensor_hd_temp; +static struct wf_control *fan_cpu_main; +static struct wf_control *fan_hd; +static struct wf_control *fan_system; +static struct wf_control *cpufreq_clamp; + +/* Set to kick the control loop into life */ +static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok, wf_smu_started; + +/* Failure handling.. could be nicer */ +#define FAILURE_FAN 0x01 +#define FAILURE_SENSOR 0x02 +#define FAILURE_OVERTEMP 0x04 + +static unsigned int wf_smu_failure_state; +static int wf_smu_readjust, wf_smu_skipping; + +/* + * ****** System Fans Control Loop ****** + * + */ + +/* Parameters for the System Fans control loop. Parameters + * not in this table such as interval, history size, ... + * are common to all versions and thus hard coded for now. + */ +struct wf_smu_sys_fans_param { + int model_id; + s32 itarget; + s32 gd, gp, gr; + + s16 offset0; + u16 scale0; + s16 offset1; + u16 scale1; +}; + +#define WF_SMU_SYS_FANS_INTERVAL 5 +#define WF_SMU_SYS_FANS_HISTORY_SIZE 2 + +/* State data used by the system fans control loop + */ +struct wf_smu_sys_fans_state { + int ticks; + s32 sys_setpoint; + s32 hd_setpoint; + s16 offset0; + u16 scale0; + s16 offset1; + u16 scale1; + struct wf_pid_state pid; +}; + +/* + * Configs for SMU Sytem Fan control loop + */ +static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = { + /* Model ID 2 */ + { + .model_id = 2, + .itarget = 0x3a0000, + .gd = 0x15400000, + .gp = 0x00200000, + .gr = 0x000002fd, + .offset0 = 0xff38, + .scale0 = 0x0ccd, + .offset1 = 0x0208, + .scale1 = 0x07ae, + }, + /* Model ID 3 */ + { + .model_id = 2, + .itarget = 0x350000, + .gd = 0x08e00000, + .gp = 0x00566666, + .gr = 0x0000072b, + .offset0 = 0xff38, + .scale0 = 0x0ccd, + .offset1 = 0x0000, + .scale1 = 0x0000, + }, + /* Model ID 5 */ + { + .model_id = 2, + .itarget = 0x3a0000, + .gd = 0x15400000, + .gp = 0x00233333, + .gr = 0x000002fd, + .offset0 = 0x0000, + .scale0 = 0x1000, + .offset1 = 0x0091, + .scale1 = 0x0bae, + }, +}; +#define WF_SMU_SYS_FANS_NUM_CONFIGS ARRAY_SIZE(wf_smu_sys_all_params) + +static struct wf_smu_sys_fans_state *wf_smu_sys_fans; + +/* + * ****** CPU Fans Control Loop ****** + * + */ + + +#define WF_SMU_CPU_FANS_INTERVAL 1 +#define WF_SMU_CPU_FANS_MAX_HISTORY 16 +#define WF_SMU_CPU_FANS_SIBLING_SCALE 0x00001000 +#define WF_SMU_CPU_FANS_SIBLING_OFFSET 0xfffffb50 + +/* State data used by the cpu fans control loop + */ +struct wf_smu_cpu_fans_state { + int ticks; + s32 cpu_setpoint; + s32 scale; + s32 offset; + struct wf_cpu_pid_state pid; +}; + +static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans; + + + +/* + * ***** Implementation ***** + * + */ + +static void wf_smu_create_sys_fans(void) +{ + struct wf_smu_sys_fans_param *param = NULL; + struct wf_pid_param pid_param; + int i; + + /* First, locate the params for this model */ + for (i = 0; i < WF_SMU_SYS_FANS_NUM_CONFIGS; i++) + if (wf_smu_sys_all_params[i].model_id == wf_smu_mach_model) { + param = &wf_smu_sys_all_params[i]; + break; + } + + /* No params found, put fans to max */ + if (param == NULL) { + printk(KERN_WARNING "windfarm: System fan config not found " + "for this machine model, max fan speed\n"); + goto fail; + } + + /* Alloc & initialize state */ + wf_smu_sys_fans = kmalloc(sizeof(struct wf_smu_sys_fans_state), + GFP_KERNEL); + if (wf_smu_sys_fans == NULL) { + printk(KERN_WARNING "windfarm: Memory allocation error" + " max fan speed\n"); + goto fail; + } + wf_smu_sys_fans->ticks = 1; + wf_smu_sys_fans->scale0 = param->scale0; + wf_smu_sys_fans->offset0 = param->offset0; + wf_smu_sys_fans->scale1 = param->scale1; + wf_smu_sys_fans->offset1 = param->offset1; + + /* Fill PID params */ + pid_param.gd = param->gd; + pid_param.gp = param->gp; + pid_param.gr = param->gr; + pid_param.interval = WF_SMU_SYS_FANS_INTERVAL; + pid_param.history_len = WF_SMU_SYS_FANS_HISTORY_SIZE; + pid_param.itarget = param->itarget; + pid_param.min = fan_system->ops->get_min(fan_system); + pid_param.max = fan_system->ops->get_max(fan_system); + if (fan_hd) { + pid_param.min = + max(pid_param.min,fan_hd->ops->get_min(fan_hd)); + pid_param.max = + min(pid_param.max,fan_hd->ops->get_max(fan_hd)); + } + wf_pid_init(&wf_smu_sys_fans->pid, &pid_param); + + DBG("wf: System Fan control initialized.\n"); + DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n", + FIX32TOPRINT(pid_param.itarget), pid_param.min, pid_param.max); + return; + + fail: + + if (fan_system) + wf_control_set_max(fan_system); + if (fan_hd) + wf_control_set_max(fan_hd); +} + +static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st) +{ + s32 new_setpoint, temp, scaled, cputarget; + int rc; + + if (--st->ticks != 0) { + if (wf_smu_readjust) + goto readjust; + return; + } + st->ticks = WF_SMU_SYS_FANS_INTERVAL; + + rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp); + if (rc) { + printk(KERN_WARNING "windfarm: HD temp sensor error %d\n", + rc); + wf_smu_failure_state |= FAILURE_SENSOR; + return; + } + + DBG("wf_smu: System Fans tick ! HD temp: %d.%03d\n", + FIX32TOPRINT(temp)); + + if (temp > (st->pid.param.itarget + 0x50000)) + wf_smu_failure_state |= FAILURE_OVERTEMP; + + new_setpoint = wf_pid_run(&st->pid, temp); + + DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint); + + scaled = ((((s64)new_setpoint) * (s64)st->scale0) >> 12) + st->offset0; + + DBG("wf_smu: scaled setpoint: %d RPM\n", (int)scaled); + + cputarget = wf_smu_cpu_fans ? wf_smu_cpu_fans->pid.target : 0; + cputarget = ((((s64)cputarget) * (s64)st->scale1) >> 12) + st->offset1; + scaled = max(scaled, cputarget); + scaled = max(scaled, st->pid.param.min); + scaled = min(scaled, st->pid.param.max); + + DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)scaled); + + if (st->sys_setpoint == scaled && new_setpoint == st->hd_setpoint) + return; + st->sys_setpoint = scaled; + st->hd_setpoint = new_setpoint; + readjust: + if (fan_system && wf_smu_failure_state == 0) { + rc = fan_system->ops->set_value(fan_system, st->sys_setpoint); + if (rc) { + printk(KERN_WARNING "windfarm: Sys fan error %d\n", + rc); + wf_smu_failure_state |= FAILURE_FAN; + } + } + if (fan_hd && wf_smu_failure_state == 0) { + rc = fan_hd->ops->set_value(fan_hd, st->hd_setpoint); + if (rc) { + printk(KERN_WARNING "windfarm: HD fan error %d\n", + rc); + wf_smu_failure_state |= FAILURE_FAN; + } + } +} + +static void wf_smu_create_cpu_fans(void) +{ + struct wf_cpu_pid_param pid_param; + struct smu_sdbp_header *hdr; + struct smu_sdbp_cpupiddata *piddata; + struct smu_sdbp_fvt *fvt; + s32 tmax, tdelta, maxpow, powadj; + + /* First, locate the PID params in SMU SBD */ + hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL); + if (hdr == 0) { + printk(KERN_WARNING "windfarm: CPU PID fan config not found " + "max fan speed\n"); + goto fail; + } + piddata = (struct smu_sdbp_cpupiddata *)&hdr[1]; + + /* Get the FVT params for operating point 0 (the only supported one + * for now) in order to get tmax + */ + hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (hdr) { + fvt = (struct smu_sdbp_fvt *)&hdr[1]; + tmax = ((s32)fvt->maxtemp) << 16; + } else + tmax = 0x5e0000; /* 94 degree default */ + + /* Alloc & initialize state */ + wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state), + GFP_KERNEL); + if (wf_smu_cpu_fans == NULL) + goto fail; + wf_smu_cpu_fans->ticks = 1; + + wf_smu_cpu_fans->scale = WF_SMU_CPU_FANS_SIBLING_SCALE; + wf_smu_cpu_fans->offset = WF_SMU_CPU_FANS_SIBLING_OFFSET; + + /* Fill PID params */ + pid_param.interval = WF_SMU_CPU_FANS_INTERVAL; + pid_param.history_len = piddata->history_len; + if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) { + printk(KERN_WARNING "windfarm: History size overflow on " + "CPU control loop (%d)\n", piddata->history_len); + pid_param.history_len = WF_CPU_PID_MAX_HISTORY; + } + pid_param.gd = piddata->gd; + pid_param.gp = piddata->gp; + pid_param.gr = piddata->gr / pid_param.history_len; + + tdelta = ((s32)piddata->target_temp_delta) << 16; + maxpow = ((s32)piddata->max_power) << 16; + powadj = ((s32)piddata->power_adj) << 16; + + pid_param.tmax = tmax; + pid_param.ttarget = tmax - tdelta; + pid_param.pmaxadj = maxpow - powadj; + + pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main); + pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main); + + wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param); + + DBG("wf: CPU Fan control initialized.\n"); + DBG(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n", + FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax), + pid_param.min, pid_param.max); + + return; + + fail: + printk(KERN_WARNING "windfarm: CPU fan config not found\n" + "for this machine model, max fan speed\n"); + + if (cpufreq_clamp) + wf_control_set_max(cpufreq_clamp); + if (fan_cpu_main) + wf_control_set_max(fan_cpu_main); +} + +static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st) +{ + s32 new_setpoint, temp, power, systarget; + int rc; + + if (--st->ticks != 0) { + if (wf_smu_readjust) + goto readjust; + return; + } + st->ticks = WF_SMU_CPU_FANS_INTERVAL; + + rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp); + if (rc) { + printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n", + rc); + wf_smu_failure_state |= FAILURE_SENSOR; + return; + } + + rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power); + if (rc) { + printk(KERN_WARNING "windfarm: CPU power sensor error %d\n", + rc); + wf_smu_failure_state |= FAILURE_SENSOR; + return; + } + + DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n", + FIX32TOPRINT(temp), FIX32TOPRINT(power)); + +#ifdef HACKED_OVERTEMP + if (temp > 0x4a0000) + wf_smu_failure_state |= FAILURE_OVERTEMP; +#else + if (temp > st->pid.param.tmax) + wf_smu_failure_state |= FAILURE_OVERTEMP; +#endif + new_setpoint = wf_cpu_pid_run(&st->pid, power, temp); + + DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint); + + systarget = wf_smu_sys_fans ? wf_smu_sys_fans->pid.target : 0; + systarget = ((((s64)systarget) * (s64)st->scale) >> 12) + + st->offset; + new_setpoint = max(new_setpoint, systarget); + new_setpoint = max(new_setpoint, st->pid.param.min); + new_setpoint = min(new_setpoint, st->pid.param.max); + + DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)new_setpoint); + + if (st->cpu_setpoint == new_setpoint) + return; + st->cpu_setpoint = new_setpoint; + readjust: + if (fan_cpu_main && wf_smu_failure_state == 0) { + rc = fan_cpu_main->ops->set_value(fan_cpu_main, + st->cpu_setpoint); + if (rc) { + printk(KERN_WARNING "windfarm: CPU main fan" + " error %d\n", rc); + wf_smu_failure_state |= FAILURE_FAN; + } + } +} + + +/* + * ****** Attributes ****** + * + */ + +#define BUILD_SHOW_FUNC_FIX(name, data) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + ssize_t r; \ + s32 val = 0; \ + data->ops->get_value(data, &val); \ + r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \ + return r; \ +} \ +static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL); + + +#define BUILD_SHOW_FUNC_INT(name, data) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + s32 val = 0; \ + data->ops->get_value(data, &val); \ + return sprintf(buf, "%d", val); \ +} \ +static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL); + +BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main); +BUILD_SHOW_FUNC_INT(sys_fan, fan_system); +BUILD_SHOW_FUNC_INT(hd_fan, fan_hd); + +BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp); +BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power); +BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp); + +/* + * ****** Setup / Init / Misc ... ****** + * + */ + +static void wf_smu_tick(void) +{ + unsigned int last_failure = wf_smu_failure_state; + unsigned int new_failure; + + if (!wf_smu_started) { + DBG("wf: creating control loops !\n"); + wf_smu_create_sys_fans(); + wf_smu_create_cpu_fans(); + wf_smu_started = 1; + } + + /* Skipping ticks */ + if (wf_smu_skipping && --wf_smu_skipping) + return; + + wf_smu_failure_state = 0; + if (wf_smu_sys_fans) + wf_smu_sys_fans_tick(wf_smu_sys_fans); + if (wf_smu_cpu_fans) + wf_smu_cpu_fans_tick(wf_smu_cpu_fans); + + wf_smu_readjust = 0; + new_failure = wf_smu_failure_state & ~last_failure; + + /* If entering failure mode, clamp cpufreq and ramp all + * fans to full speed. + */ + if (wf_smu_failure_state && !last_failure) { + if (cpufreq_clamp) + wf_control_set_max(cpufreq_clamp); + if (fan_system) + wf_control_set_max(fan_system); + if (fan_cpu_main) + wf_control_set_max(fan_cpu_main); + if (fan_hd) + wf_control_set_max(fan_hd); + } + + /* If leaving failure mode, unclamp cpufreq and readjust + * all fans on next iteration + */ + if (!wf_smu_failure_state && last_failure) { + if (cpufreq_clamp) + wf_control_set_min(cpufreq_clamp); + wf_smu_readjust = 1; + } + + /* Overtemp condition detected, notify and start skipping a couple + * ticks to let the temperature go down + */ + if (new_failure & FAILURE_OVERTEMP) { + wf_set_overtemp(); + wf_smu_skipping = 2; + } + + /* We only clear the overtemp condition if overtemp is cleared + * _and_ no other failure is present. Since a sensor error will + * clear the overtemp condition (can't measure temperature) at + * the control loop levels, but we don't want to keep it clear + * here in this case + */ + if (new_failure == 0 && last_failure & FAILURE_OVERTEMP) + wf_clear_overtemp(); +} + +static void wf_smu_new_control(struct wf_control *ct) +{ + if (wf_smu_all_controls_ok) + return; + + if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) { + if (wf_get_control(ct) == 0) { + fan_cpu_main = ct; + device_create_file(wf_smu_dev, &dev_attr_cpu_fan); + } + } + + if (fan_system == NULL && !strcmp(ct->name, "system-fan")) { + if (wf_get_control(ct) == 0) { + fan_system = ct; + device_create_file(wf_smu_dev, &dev_attr_sys_fan); + } + } + + if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) { + if (wf_get_control(ct) == 0) + cpufreq_clamp = ct; + } + + /* Darwin property list says the HD fan is only for model ID + * 0, 1, 2 and 3 + */ + + if (wf_smu_mach_model > 3) { + if (fan_system && fan_cpu_main && cpufreq_clamp) + wf_smu_all_controls_ok = 1; + return; + } + + if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) { + if (wf_get_control(ct) == 0) { + fan_hd = ct; + device_create_file(wf_smu_dev, &dev_attr_hd_fan); + } + } + + if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp) + wf_smu_all_controls_ok = 1; +} + +static void wf_smu_new_sensor(struct wf_sensor *sr) +{ + if (wf_smu_all_sensors_ok) + return; + + if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) { + if (wf_get_sensor(sr) == 0) { + sensor_cpu_power = sr; + device_create_file(wf_smu_dev, &dev_attr_cpu_power); + } + } + + if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) { + if (wf_get_sensor(sr) == 0) { + sensor_cpu_temp = sr; + device_create_file(wf_smu_dev, &dev_attr_cpu_temp); + } + } + + if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) { + if (wf_get_sensor(sr) == 0) { + sensor_hd_temp = sr; + device_create_file(wf_smu_dev, &dev_attr_hd_temp); + } + } + + if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp) + wf_smu_all_sensors_ok = 1; +} + + +static int wf_smu_notify(struct notifier_block *self, + unsigned long event, void *data) +{ + switch(event) { + case WF_EVENT_NEW_CONTROL: + DBG("wf: new control %s detected\n", + ((struct wf_control *)data)->name); + wf_smu_new_control(data); + wf_smu_readjust = 1; + break; + case WF_EVENT_NEW_SENSOR: + DBG("wf: new sensor %s detected\n", + ((struct wf_sensor *)data)->name); + wf_smu_new_sensor(data); + break; + case WF_EVENT_TICK: + if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok) + wf_smu_tick(); + } + + return 0; +} + +static struct notifier_block wf_smu_events = { + .notifier_call = wf_smu_notify, +}; + +static int wf_init_pm(void) +{ + struct smu_sdbp_header *hdr; + + hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL); + if (hdr != 0) { + struct smu_sdbp_sensortree *st = + (struct smu_sdbp_sensortree *)&hdr[1]; + wf_smu_mach_model = st->model_id; + } + + printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n", + wf_smu_mach_model); + + return 0; +} + +static int wf_smu_probe(struct device *ddev) +{ + wf_smu_dev = ddev; + + wf_register_client(&wf_smu_events); + + return 0; +} + +static int wf_smu_remove(struct device *ddev) +{ + wf_unregister_client(&wf_smu_events); + + /* XXX We don't have yet a guarantee that our callback isn't + * in progress when returning from wf_unregister_client, so + * we add an arbitrary delay. I'll have to fix that in the core + */ + msleep(1000); + + /* Release all sensors */ + /* One more crappy race: I don't think we have any guarantee here + * that the attribute callback won't race with the sensor beeing + * disposed of, and I'm not 100% certain what best way to deal + * with that except by adding locks all over... I'll do that + * eventually but heh, who ever rmmod this module anyway ? + */ + if (sensor_cpu_power) { + device_remove_file(wf_smu_dev, &dev_attr_cpu_power); + wf_put_sensor(sensor_cpu_power); + } + if (sensor_cpu_temp) { + device_remove_file(wf_smu_dev, &dev_attr_cpu_temp); + wf_put_sensor(sensor_cpu_temp); + } + if (sensor_hd_temp) { + device_remove_file(wf_smu_dev, &dev_attr_hd_temp); + wf_put_sensor(sensor_hd_temp); + } + + /* Release all controls */ + if (fan_cpu_main) { + device_remove_file(wf_smu_dev, &dev_attr_cpu_fan); + wf_put_control(fan_cpu_main); + } + if (fan_hd) { + device_remove_file(wf_smu_dev, &dev_attr_hd_fan); + wf_put_control(fan_hd); + } + if (fan_system) { + device_remove_file(wf_smu_dev, &dev_attr_sys_fan); + wf_put_control(fan_system); + } + if (cpufreq_clamp) + wf_put_control(cpufreq_clamp); + + /* Destroy control loops state structures */ + if (wf_smu_sys_fans) + kfree(wf_smu_sys_fans); + if (wf_smu_cpu_fans) + kfree(wf_smu_cpu_fans); + + wf_smu_dev = NULL; + + return 0; +} + +static struct device_driver wf_smu_driver = { + .name = "windfarm", + .bus = &platform_bus_type, + .probe = wf_smu_probe, + .remove = wf_smu_remove, +}; + + +static int __init wf_smu_init(void) +{ + int rc = -ENODEV; + + if (machine_is_compatible("PowerMac8,1") || + machine_is_compatible("PowerMac8,2")) + rc = wf_init_pm(); + + if (rc == 0) { +#ifdef MODULE + request_module("windfarm_smu_controls"); + request_module("windfarm_smu_sensors"); + request_module("windfarm_lm75_sensor"); + +#endif /* MODULE */ + driver_register(&wf_smu_driver); + } + + return rc; +} + +static void __exit wf_smu_exit(void) +{ + + driver_unregister(&wf_smu_driver); +} + + +module_init(wf_smu_init); +module_exit(wf_smu_exit); + +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("Thermal control logic for iMac G5"); +MODULE_LICENSE("GPL"); + |
