summaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/via-cuda.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/macintosh/via-cuda.c')
-rw-r--r--drivers/macintosh/via-cuda.c58
1 files changed, 32 insertions, 26 deletions
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 76d21775fc35..741a93a3eb61 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -82,6 +82,7 @@ static unsigned char cuda_rbuf[16];
static unsigned char *reply_ptr;
static int reading_reply;
static int data_index;
+static int cuda_irq;
#ifdef CONFIG_PPC
static struct device_node *vias;
#endif
@@ -160,10 +161,8 @@ int __init find_via_cuda(void)
/* Clear and enable interrupts, but only on PPC. On 68K it's done */
/* for us by the main VIA driver in arch/m68k/mac/via.c */
-#ifndef CONFIG_MAC
out_8(&via[IFR], 0x7f); /* clear interrupts by writing 1s */
out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
-#endif
/* enable autopoll */
cuda_request(&req, NULL, 3, CUDA_PACKET, CUDA_AUTOPOLL, 1);
@@ -181,24 +180,22 @@ int __init find_via_cuda(void)
static int __init via_cuda_start(void)
{
- unsigned int irq;
-
if (via == NULL)
return -ENODEV;
#ifdef CONFIG_MAC
- irq = IRQ_MAC_ADB;
+ cuda_irq = IRQ_MAC_ADB;
#else /* CONFIG_MAC */
- irq = irq_of_parse_and_map(vias, 0);
- if (irq == NO_IRQ) {
+ cuda_irq = irq_of_parse_and_map(vias, 0);
+ if (cuda_irq == NO_IRQ) {
printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
vias->full_name);
return -ENODEV;
}
-#endif /* CONFIG_MAP */
+#endif /* CONFIG_MAC */
- if (request_irq(irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
- printk(KERN_ERR "via-cuda: can't request irq %d\n", irq);
+ if (request_irq(cuda_irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
+ printk(KERN_ERR "via-cuda: can't request irq %d\n", cuda_irq);
return -EAGAIN;
}
@@ -238,6 +235,7 @@ cuda_init(void)
printk(KERN_ERR "cuda_init_via() failed\n");
return -ENODEV;
}
+ out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
return via_cuda_start();
#endif
@@ -263,15 +261,17 @@ cuda_init_via(void)
out_8(&via[B], in_8(&via[B]) | TACK | TIP); /* negate them */
out_8(&via[ACR] ,(in_8(&via[ACR]) & ~SR_CTRL) | SR_EXT); /* SR data in */
(void)in_8(&via[SR]); /* clear any left-over data */
-#ifndef CONFIG_MAC
+#ifdef CONFIG_PPC
out_8(&via[IER], 0x7f); /* disable interrupts from VIA */
(void)in_8(&via[IER]);
+#else
+ out_8(&via[IER], SR_INT); /* disable SR interrupt from VIA */
#endif
/* delay 4ms and then clear any pending interrupt */
mdelay(4);
(void)in_8(&via[SR]);
- out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
+ out_8(&via[IFR], SR_INT);
/* sync with the CUDA - assert TACK without TIP */
out_8(&via[B], in_8(&via[B]) & ~TACK);
@@ -282,7 +282,7 @@ cuda_init_via(void)
/* wait for the interrupt and then clear it */
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (2)");
(void)in_8(&via[SR]);
- out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
+ out_8(&via[IFR], SR_INT);
/* finish the sync by negating TACK */
out_8(&via[B], in_8(&via[B]) | TACK);
@@ -291,7 +291,7 @@ cuda_init_via(void)
WAIT_FOR(in_8(&via[B]) & TREQ, "CUDA response to sync (3)");
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (4)");
(void)in_8(&via[SR]);
- out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
+ out_8(&via[IFR], SR_INT);
out_8(&via[B], in_8(&via[B]) | TIP); /* should be unnecessary */
return 0;
@@ -428,16 +428,12 @@ cuda_start(void)
void
cuda_poll(void)
{
- unsigned long flags;
-
/* cuda_interrupt only takes a normal lock, we disable
* interrupts here to avoid re-entering and thus deadlocking.
- * An option would be to disable only the IRQ source with
- * disable_irq(), would that work on m68k ? --BenH
*/
- local_irq_save(flags);
+ disable_irq(cuda_irq);
cuda_interrupt(0, NULL);
- local_irq_restore(flags);
+ enable_irq(cuda_irq);
}
static irqreturn_t
@@ -448,15 +444,25 @@ cuda_interrupt(int irq, void *arg)
unsigned char ibuf[16];
int ibuf_len = 0;
int complete = 0;
- unsigned char virq;
spin_lock(&cuda_lock);
- virq = in_8(&via[IFR]) & 0x7f;
- out_8(&via[IFR], virq);
- if ((virq & SR_INT) == 0) {
- spin_unlock(&cuda_lock);
- return IRQ_NONE;
+ /* On powermacs, this handler is registered for the VIA IRQ. But it uses
+ * just the shift register IRQ -- other VIA interrupt sources are disabled.
+ * On m68k macs, the VIA IRQ sources are dispatched individually. Unless
+ * we are polling, the shift register IRQ flag has already been cleared.
+ */
+
+#ifdef CONFIG_MAC
+ if (!arg)
+#endif
+ {
+ if ((in_8(&via[IFR]) & SR_INT) == 0) {
+ spin_unlock(&cuda_lock);
+ return IRQ_NONE;
+ } else {
+ out_8(&via[IFR], SR_INT);
+ }
}
status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);
OpenPOWER on IntegriCloud