diff options
Diffstat (limited to 'drivers/isdn/hisax')
| -rw-r--r-- | drivers/isdn/hisax/avma1_cs.c | 97 | ||||
| -rw-r--r-- | drivers/isdn/hisax/config.c | 18 | ||||
| -rw-r--r-- | drivers/isdn/hisax/elsa_cs.c | 100 | ||||
| -rw-r--r-- | drivers/isdn/hisax/hfc_sx.c | 13 | ||||
| -rw-r--r-- | drivers/isdn/hisax/hisax.h | 1 | ||||
| -rw-r--r-- | drivers/isdn/hisax/sedlbauer_cs.c | 168 | ||||
| -rw-r--r-- | drivers/isdn/hisax/teles_cs.c | 98 |
7 files changed, 60 insertions, 435 deletions
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 94263c22b874..ac4dd7857cbd 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include "hisax_cfg.h" @@ -40,67 +39,22 @@ module_param(isdnprot, int, 0); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avma1cs_config(struct pcmcia_device *link) __devinit ; static void avma1cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ; - -/*====================================================================== - - avma1cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->end = 16; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; - /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avma1cs_config(p_dev); } /* avma1cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit avma1cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link); @@ -108,26 +62,13 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link) kfree(link->priv); } /* avma1cs_detach */ -/*====================================================================== - - avma1cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - -static int avma1cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; - - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } @@ -161,7 +102,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; @@ -175,9 +116,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return -ENODEV; } - printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n", - (unsigned int) link->resource[0]->start, link->irq); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = isdnprot; @@ -196,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return 0; } /* avma1cs_config */ -/*====================================================================== - - After a card is removed, avma1cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void avma1cs_release(struct pcmcia_device *link) { unsigned long minor = (unsigned long) link->priv; @@ -216,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* avma1cs_release */ - static struct pcmcia_device_id avma1cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb), PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b), @@ -226,19 +155,15 @@ MODULE_DEVICE_TABLE(pcmcia, avma1cs_ids); static struct pcmcia_driver avma1cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avma1_cs", - }, + .name = "avma1_cs", .probe = avma1cs_probe, .remove = __devexit_p(avma1cs_detach), .id_table = avma1cs_ids, }; -/*====================================================================*/ - static int __init init_avma1_cs(void) { - return(pcmcia_register_driver(&avma1cs_driver)); + return pcmcia_register_driver(&avma1cs_driver); } static void __exit exit_avma1_cs(void) diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 6f9afcd5ca4e..b133378d4dc9 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -801,6 +801,16 @@ static void closecard(int cardnr) ll_unload(csta); } +static irqreturn_t card_irq(int intno, void *dev_id) +{ + struct IsdnCardState *cs = dev_id; + irqreturn_t ret = cs->irq_func(intno, cs); + + if (ret == IRQ_HANDLED) + cs->irq_cnt++; + return ret; +} + static int init_card(struct IsdnCardState *cs) { int irq_cnt, cnt = 3, ret; @@ -809,10 +819,10 @@ static int init_card(struct IsdnCardState *cs) ret = cs->cardmsg(cs, CARD_INIT, NULL); return(ret); } - irq_cnt = kstat_irqs(cs->irq); + irq_cnt = cs->irq_cnt = 0; printk(KERN_INFO "%s: IRQ %d count %d\n", CardType[cs->typ], cs->irq, irq_cnt); - if (request_irq(cs->irq, cs->irq_func, cs->irq_flags, "HiSax", cs)) { + if (request_irq(cs->irq, card_irq, cs->irq_flags, "HiSax", cs)) { printk(KERN_WARNING "HiSax: couldn't get interrupt %d\n", cs->irq); return 1; @@ -822,8 +832,8 @@ static int init_card(struct IsdnCardState *cs) /* Timeout 10ms */ msleep(10); printk(KERN_INFO "%s: IRQ %d count %d\n", - CardType[cs->typ], cs->irq, kstat_irqs(cs->irq)); - if (kstat_irqs(cs->irq) == irq_cnt) { + CardType[cs->typ], cs->irq, cs->irq_cnt); + if (cs->irq_cnt == irq_cnt) { printk(KERN_WARNING "%s: IRQ(%d) getting no interrupts during init %d\n", CardType[cs->typ], cs->irq, 4 - cnt); diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index b3c08aaf41c4..496d477af0f8 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the elsa_cs event - handler. -*/ - static int elsa_cs_config(struct pcmcia_device *link) __devinit ; static void elsa_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -92,18 +73,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - elsa_cs_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit elsa_cs_probe(struct pcmcia_device *link) { local_info_t *local; @@ -119,31 +88,9 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) local->cardnr = -1; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - return elsa_cs_config(link); } /* elsa_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit elsa_cs_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -156,27 +103,17 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link) kfree(info); } /* elsa_cs_detach */ -/*====================================================================== - - elsa_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - -static int elsa_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 3; + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -199,6 +136,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "elsa_config(0x%p)\n", link); dev = link->priv; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL); if (i != 0) goto failed; @@ -206,21 +145,10 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -240,14 +168,6 @@ failed: return -ENODEV; } /* elsa_cs_config */ -/*====================================================================== - - After a card is removed, elsa_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void elsa_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -291,9 +211,7 @@ MODULE_DEVICE_TABLE(pcmcia, elsa_ids); static struct pcmcia_driver elsa_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "elsa_cs", - }, + .name = "elsa_cs", .probe = elsa_cs_probe, .remove = __devexit_p(elsa_cs_detach), .id_table = elsa_ids, diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c index be5faf4aa868..5aa138eb0b3c 100644 --- a/drivers/isdn/hisax/hfc_sx.c +++ b/drivers/isdn/hisax/hfc_sx.c @@ -234,13 +234,14 @@ read_fifo(struct IsdnCardState *cs, u_char fifo, int trans_max) count++; if (count > trans_max) count = trans_max; /* limit length */ - if ((skb = dev_alloc_skb(count))) { - dst = skb_put(skb, count); - while (count--) + skb = dev_alloc_skb(count); + if (skb) { + dst = skb_put(skb, count); + while (count--) *dst++ = Read_hfc(cs, HFCSX_FIF_DRD); - return(skb); - } - else return(NULL); /* no memory */ + return skb; + } else + return NULL; /* no memory */ } do { diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h index 832a87855ffb..32ab3924aa73 100644 --- a/drivers/isdn/hisax/hisax.h +++ b/drivers/isdn/hisax/hisax.h @@ -959,6 +959,7 @@ struct IsdnCardState { u_long event; struct work_struct tqueue; struct timer_list dbusytimer; + unsigned int irq_cnt; #ifdef ERROR_STATISTIC int err_crc; int err_tx; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index a024192b672a..360204bc2777 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the sedlbauer - event handler. -*/ - static int sedlbauer_config(struct pcmcia_device *link) __devinit ; static void sedlbauer_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -92,18 +74,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - sedlbauer_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit sedlbauer_probe(struct pcmcia_device *link) { local_info_t *local; @@ -118,35 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - - /* from old sedl_cs - */ - /* The io structure describes IO port mapping */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return sedlbauer_config(link); } /* sedlbauer_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit sedlbauer_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link); @@ -158,70 +102,15 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link) kfree(link->priv); } /* sedlbauer_detach */ -/*====================================================================== - - sedlbauer_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ -static int sedlbauer_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } - - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - p_dev->io_lines = 3; - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } - - return 0; + p_dev->io_lines = 3; + return pcmcia_request_io(p_dev); } - - static int __devinit sedlbauer_config(struct pcmcia_device *link) { int ret; @@ -229,44 +118,17 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL); if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -290,14 +152,6 @@ failed: } /* sedlbauer_config */ -/*====================================================================== - - After a card is removed, sedlbauer_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void sedlbauer_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -346,9 +200,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids); static struct pcmcia_driver sedlbauer_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sedlbauer_cs", - }, + .name = "sedlbauer_cs", .probe = sedlbauer_probe, .remove = __devexit_p(sedlbauer_detach), .id_table = sedlbauer_ids, diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 7296102ca255..282a4467ef19 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -45,26 +44,8 @@ MODULE_LICENSE("GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the teles_cs event - handler. -*/ - static int teles_cs_config(struct pcmcia_device *link) __devinit ; static void teles_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void teles_detach(struct pcmcia_device *p_dev) __devexit ; typedef struct local_info_t { @@ -73,18 +54,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - teles_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit teles_probe(struct pcmcia_device *link) { local_info_t *local; @@ -99,31 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 96; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return teles_cs_config(link); } /* teles_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit teles_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -136,27 +85,17 @@ static void __devexit teles_detach(struct pcmcia_device *link) kfree(info); } /* teles_detach */ -/*====================================================================== - - teles_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - -static int teles_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 5; + p_dev->resource[0]->end = 96; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -186,21 +125,10 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (!link->irq) goto cs_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto cs_failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -222,14 +150,6 @@ cs_failed: return -ENODEV; } /* teles_cs_config */ -/*====================================================================== - - After a card is removed, teles_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void teles_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -273,9 +193,7 @@ MODULE_DEVICE_TABLE(pcmcia, teles_ids); static struct pcmcia_driver teles_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "teles_cs", - }, + .name = "teles_cs", .probe = teles_probe, .remove = __devexit_p(teles_detach), .id_table = teles_ids, |
