diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/rmi4/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/input/rmi4/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/rmi4/rmi_bus.c | 3 | ||||
| -rw-r--r-- | drivers/input/rmi4/rmi_driver.h | 1 | ||||
| -rw-r--r-- | drivers/input/rmi4/rmi_f30.c | 407 |
5 files changed, 421 insertions, 0 deletions
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index aabb8542a55d..284faec30a7a 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -43,3 +43,12 @@ config RMI4_F12 Function 12 provides 2D multifinger pointing for touchscreens and touchpads. For sensors that support relative pointing, F12 also provides mouse input. + +config RMI4_F30 + bool "RMI4 Function 30 (GPIO LED)" + depends on RMI4_CORE + help + Say Y here if you want to add support for RMI4 function 30. + + Function 30 provides GPIO and LED support for RMI4 devices. This + includes support for buttons on TouchPads and ClickPads. diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile index d01e703304c3..ad7156d8252c 100644 --- a/drivers/input/rmi4/Makefile +++ b/drivers/input/rmi4/Makefile @@ -6,6 +6,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o # Function drivers rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o +rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o # Transports obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c index a3d766118b61..b368b0515c5a 100644 --- a/drivers/input/rmi4/rmi_bus.c +++ b/drivers/input/rmi4/rmi_bus.c @@ -312,6 +312,9 @@ static struct rmi_function_handler *fn_handlers[] = { #ifdef CONFIG_RMI4_F12 &rmi_f12_handler, #endif +#ifdef CONFIG_RMI4_F30 + &rmi_f30_handler, +#endif }; static void __rmi_unregister_function_handlers(int start_idx) diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h index ed9127daf5a2..6e140fa3cce1 100644 --- a/drivers/input/rmi4/rmi_driver.h +++ b/drivers/input/rmi4/rmi_driver.h @@ -101,4 +101,5 @@ char *rmi_f01_get_product_ID(struct rmi_function *fn); extern struct rmi_function_handler rmi_f01_handler; extern struct rmi_function_handler rmi_f11_handler; extern struct rmi_function_handler rmi_f12_handler; +extern struct rmi_function_handler rmi_f30_handler; #endif diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c new file mode 100644 index 000000000000..760aff1bc420 --- /dev/null +++ b/drivers/input/rmi4/rmi_f30.c @@ -0,0 +1,407 @@ +/* + * Copyright (c) 2012-2016 Synaptics Incorporated + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/rmi.h> +#include <linux/input.h> +#include <linux/slab.h> +#include "rmi_driver.h" + +#define RMI_F30_QUERY_SIZE 2 + +/* Defs for Query 0 */ +#define RMI_F30_EXTENDED_PATTERNS 0x01 +#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1) +#define RMI_F30_HAS_LED (1 << 2) +#define RMI_F30_HAS_GPIO (1 << 3) +#define RMI_F30_HAS_HAPTIC (1 << 4) +#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5) +#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6) + +/* Defs for Query 1 */ +#define RMI_F30_GPIO_LED_COUNT 0x1F + +/* Defs for Control Registers */ +#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01 +#define RMI_F30_CTRL_1_HALT (1 << 4) +#define RMI_F30_CTRL_1_HALTED (1 << 5) +#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03 + +struct rmi_f30_ctrl_data { + int address; + int length; + u8 *regs; +}; + +#define RMI_F30_CTRL_MAX_REGS 32 +#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3) +#define RMI_F30_CTRL_MAX_REG_BLOCKS 11 + +#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \ + + 1 \ + + RMI_F30_CTRL_MAX_BYTES \ + + RMI_F30_CTRL_MAX_BYTES \ + + RMI_F30_CTRL_MAX_BYTES \ + + 6 \ + + RMI_F30_CTRL_MAX_REGS \ + + RMI_F30_CTRL_MAX_REGS \ + + RMI_F30_CTRL_MAX_BYTES \ + + 1 \ + + 1) + +struct f30_data { + /* Query Data */ + bool has_extended_pattern; + bool has_mappable_buttons; + bool has_led; + bool has_gpio; + bool has_haptic; + bool has_gpio_driver_control; + bool has_mech_mouse_btns; + u8 gpioled_count; + + u8 register_count; + + /* Control Register Data */ + struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS]; + u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE]; + u32 ctrl_regs_size; + + u8 data_regs[RMI_F30_CTRL_MAX_BYTES]; + u16 *gpioled_key_map; + + struct input_dev *input; +}; + +static int rmi_f30_read_control_parameters(struct rmi_function *fn, + struct f30_data *f30) +{ + struct rmi_device *rmi_dev = fn->rmi_dev; + int error = 0; + + error = rmi_read_block(rmi_dev, fn->fd.control_base_addr, + f30->ctrl_regs, f30->ctrl_regs_size); + if (error) { + dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n", + __func__, fn->fd.control_base_addr, error); + return error; + } + + return 0; +} + +static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits) +{ + struct f30_data *f30 = dev_get_drvdata(&fn->dev); + struct rmi_device *rmi_dev = fn->rmi_dev; + int retval; + int gpiled = 0; + int value = 0; + int i; + int reg_num; + + if (!f30->input) + return 0; + + /* Read the gpi led data. */ + if (rmi_dev->xport->attn_data) { + memcpy(f30->data_regs, rmi_dev->xport->attn_data, + f30->register_count); + rmi_dev->xport->attn_data += f30->register_count; + rmi_dev->xport->attn_size -= f30->register_count; + } else { + retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr, + f30->data_regs, f30->register_count); + + if (retval) { + dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n", + __func__); + return retval; + } + } + + for (reg_num = 0; reg_num < f30->register_count; ++reg_num) { + for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i, + ++gpiled) { + if (f30->gpioled_key_map[gpiled] != 0) { + /* buttons have pull up resistors */ + value = (((f30->data_regs[reg_num] >> i) & 0x01) + == 0); + + rmi_dbg(RMI_DEBUG_FN, &fn->dev, + "%s: call input report key (0x%04x) value (0x%02x)", + __func__, + f30->gpioled_key_map[gpiled], value); + input_report_key(f30->input, + f30->gpioled_key_map[gpiled], + value); + } + + } + } + + return 0; +} + +static int rmi_f30_register_device(struct rmi_function *fn) +{ + int i; + struct rmi_device *rmi_dev = fn->rmi_dev; + struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev); + struct f30_data *f30 = dev_get_drvdata(&fn->dev); + struct input_dev *input_dev; + int button_count = 0; + + input_dev = drv_data->input; + if (!input_dev) { + dev_info(&fn->dev, "F30: no input device found, ignoring.\n"); + return -EINVAL; + } + + f30->input = input_dev; + + set_bit(EV_KEY, input_dev->evbit); + + input_dev->keycode = f30->gpioled_key_map; + input_dev->keycodesize = sizeof(u16); + input_dev->keycodemax = f30->gpioled_count; + + for (i = 0; i < f30->gpioled_count; i++) { + if (f30->gpioled_key_map[i] != 0) { + input_set_capability(input_dev, EV_KEY, + f30->gpioled_key_map[i]); + button_count++; + } + } + + if (button_count == 1) + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + return 0; +} + +static int rmi_f30_config(struct rmi_function *fn) +{ + struct f30_data *f30 = dev_get_drvdata(&fn->dev); + struct rmi_driver *drv = fn->rmi_dev->driver; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + int error; + + if (pdata->f30_data && pdata->f30_data->disable) { + drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask); + } else { + /* Write Control Register values back to device */ + error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr, + f30->ctrl_regs, f30->ctrl_regs_size); + if (error) { + dev_err(&fn->rmi_dev->dev, + "%s : Could not write control registers at 0x%x error (%d)\n", + __func__, fn->fd.control_base_addr, error); + return error; + } + + drv->set_irq_bits(fn->rmi_dev, fn->irq_mask); + } + return 0; +} + +static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl, + int *ctrl_addr, int len, u8 **reg) +{ + ctrl->address = *ctrl_addr; + ctrl->length = len; + ctrl->regs = *reg; + *ctrl_addr += len; + *reg += len; +} + +static inline bool rmi_f30_is_valid_button(int button, + struct rmi_f30_ctrl_data *ctrl) +{ + int byte_position = button >> 3; + int bit_position = button & 0x07; + + /* + * ctrl2 -> dir == 0 -> input mode + * ctrl3 -> data == 1 -> actual button + */ + return !(ctrl[2].regs[byte_position] & BIT(bit_position)) && + (ctrl[3].regs[byte_position] & BIT(bit_position)); +} + +static inline int rmi_f30_initialize(struct rmi_function *fn) +{ + struct f30_data *f30; + struct rmi_device *rmi_dev = fn->rmi_dev; + const struct rmi_device_platform_data *pdata; + int retval = 0; + int control_address; + int i; + int button; + u8 buf[RMI_F30_QUERY_SIZE]; + u8 *ctrl_reg; + u8 *map_memory; + + f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data), + GFP_KERNEL); + if (!f30) + return -ENOMEM; + + dev_set_drvdata(&fn->dev, f30); + + retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf, + RMI_F30_QUERY_SIZE); + + if (retval) { + dev_err(&fn->dev, "Failed to read query register.\n"); + return retval; + } + + f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS; + f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS; + f30->has_led = buf[0] & RMI_F30_HAS_LED; + f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO; + f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC; + f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL; + f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS; + f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT; + + f30->register_count = (f30->gpioled_count + 7) >> 3; + + control_address = fn->fd.control_base_addr; + ctrl_reg = f30->ctrl_regs; + + if (f30->has_gpio && f30->has_led) + rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address, + f30->register_count, &ctrl_reg); + + rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8), + &ctrl_reg); + + if (f30->has_gpio) { + rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address, + f30->register_count, &ctrl_reg); + + rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address, + f30->register_count, &ctrl_reg); + } + + if (f30->has_led) { + int ctrl5_len; + + rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address, + f30->register_count, &ctrl_reg); + + if (f30->has_extended_pattern) + ctrl5_len = 6; + else + ctrl5_len = 2; + + rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address, + ctrl5_len, &ctrl_reg); + } + + if (f30->has_led || f30->has_gpio_driver_control) { + /* control 6 uses a byte per gpio/led */ + rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address, + f30->gpioled_count, &ctrl_reg); + } + + if (f30->has_mappable_buttons) { + /* control 7 uses a byte per gpio/led */ + rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address, + f30->gpioled_count, &ctrl_reg); + } + + if (f30->has_haptic) { + rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address, + f30->register_count, &ctrl_reg); + + rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address, + sizeof(u8), &ctrl_reg); + } + + if (f30->has_mech_mouse_btns) + rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address, + sizeof(u8), &ctrl_reg); + + f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs + ?: RMI_F30_CTRL_REGS_MAX_SIZE; + + retval = rmi_f30_read_control_parameters(fn, f30); + if (retval < 0) { + dev_err(&fn->dev, + "Failed to initialize F19 control params.\n"); + return retval; + } + + map_memory = devm_kzalloc(&fn->dev, + (f30->gpioled_count * (sizeof(u16))), + GFP_KERNEL); + if (!map_memory) { + dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n"); + return -ENOMEM; + } + + f30->gpioled_key_map = (u16 *)map_memory; + + pdata = rmi_get_platform_data(rmi_dev); + if (pdata && f30->has_gpio) { + button = BTN_LEFT; + for (i = 0; i < f30->gpioled_count; i++) { + if (rmi_f30_is_valid_button(i, f30->ctrl)) { + f30->gpioled_key_map[i] = button++; + + /* + * buttonpad might be given by + * f30->has_mech_mouse_btns, but I am + * not sure, so use only the pdata info + */ + if (pdata->f30_data && + pdata->f30_data->buttonpad) + break; + } + } + } + + return 0; +} + +static int rmi_f30_probe(struct rmi_function *fn) +{ + int rc; + const struct rmi_device_platform_data *pdata = + rmi_get_platform_data(fn->rmi_dev); + + if (pdata->f30_data && pdata->f30_data->disable) + return 0; + + rc = rmi_f30_initialize(fn); + if (rc < 0) + goto error_exit; + + rc = rmi_f30_register_device(fn); + if (rc < 0) + goto error_exit; + + return 0; + +error_exit: + return rc; + +} + +struct rmi_function_handler rmi_f30_handler = { + .driver = { + .name = "rmi4_f30", + }, + .func = 0x30, + .probe = rmi_f30_probe, + .config = rmi_f30_config, + .attention = rmi_f30_attention, +}; |
