diff options
Diffstat (limited to 'drivers/input/touchscreen')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ucb1400_ts.c | 382 |
2 files changed, 135 insertions, 248 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 25287e80e236..6e1e8c624f9e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -220,6 +220,7 @@ config TOUCHSCREEN_ATMEL_TSADCC config TOUCHSCREEN_UCB1400 tristate "Philips UCB1400 touchscreen" select AC97_BUS + depends on UCB1400_CORE help This enables support for the Philips UCB1400 touchscreen interface. The UCB1400 is an AC97 audio codec. The touchscreen interface diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index bce018e45bce..54986627def0 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -5,6 +5,10 @@ * Created: September 25, 2006 * Copyright: MontaVista Software, Inc. * + * Spliting done by: Marek Vasut <marek.vasut@gmail.com> + * If something doesnt work and it worked before spliting, e-mail me, + * dont bother Nicolas please ;-) + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -25,124 +29,16 @@ #include <linux/slab.h> #include <linux/kthread.h> #include <linux/freezer.h> - -#include <sound/core.h> -#include <sound/ac97_codec.h> - - -/* - * Interesting UCB1400 AC-link registers - */ - -#define UCB_IE_RIS 0x5e -#define UCB_IE_FAL 0x60 -#define UCB_IE_STATUS 0x62 -#define UCB_IE_CLEAR 0x62 -#define UCB_IE_ADC (1 << 11) -#define UCB_IE_TSPX (1 << 12) - -#define UCB_TS_CR 0x64 -#define UCB_TS_CR_TSMX_POW (1 << 0) -#define UCB_TS_CR_TSPX_POW (1 << 1) -#define UCB_TS_CR_TSMY_POW (1 << 2) -#define UCB_TS_CR_TSPY_POW (1 << 3) -#define UCB_TS_CR_TSMX_GND (1 << 4) -#define UCB_TS_CR_TSPX_GND (1 << 5) -#define UCB_TS_CR_TSMY_GND (1 << 6) -#define UCB_TS_CR_TSPY_GND (1 << 7) -#define UCB_TS_CR_MODE_INT (0 << 8) -#define UCB_TS_CR_MODE_PRES (1 << 8) -#define UCB_TS_CR_MODE_POS (2 << 8) -#define UCB_TS_CR_BIAS_ENA (1 << 11) -#define UCB_TS_CR_TSPX_LOW (1 << 12) -#define UCB_TS_CR_TSMX_LOW (1 << 13) - -#define UCB_ADC_CR 0x66 -#define UCB_ADC_SYNC_ENA (1 << 0) -#define UCB_ADC_VREFBYP_CON (1 << 1) -#define UCB_ADC_INP_TSPX (0 << 2) -#define UCB_ADC_INP_TSMX (1 << 2) -#define UCB_ADC_INP_TSPY (2 << 2) -#define UCB_ADC_INP_TSMY (3 << 2) -#define UCB_ADC_INP_AD0 (4 << 2) -#define UCB_ADC_INP_AD1 (5 << 2) -#define UCB_ADC_INP_AD2 (6 << 2) -#define UCB_ADC_INP_AD3 (7 << 2) -#define UCB_ADC_EXT_REF (1 << 5) -#define UCB_ADC_START (1 << 7) -#define UCB_ADC_ENA (1 << 15) - -#define UCB_ADC_DATA 0x68 -#define UCB_ADC_DAT_VALID (1 << 15) -#define UCB_ADC_DAT_VALUE(x) ((x) & 0x3ff) - -#define UCB_ID 0x7e -#define UCB_ID_1400 0x4304 - - -struct ucb1400 { - struct snd_ac97 *ac97; - struct input_dev *ts_idev; - - int irq; - - wait_queue_head_t ts_wait; - struct task_struct *ts_task; - - unsigned int irq_pending; /* not bit field shared */ - unsigned int ts_restart:1; - unsigned int adcsync:1; -}; +#include <linux/ucb1400.h> static int adcsync; static int ts_delay = 55; /* us */ static int ts_delay_pressure; /* us */ -static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg) -{ - return ucb->ac97->bus->ops->read(ucb->ac97, reg); -} - -static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val) -{ - ucb->ac97->bus->ops->write(ucb->ac97, reg, val); -} - -static inline void ucb1400_adc_enable(struct ucb1400 *ucb) -{ - ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA); -} - -static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel) -{ - unsigned int val; - - if (ucb->adcsync) - adc_channel |= UCB_ADC_SYNC_ENA; - - ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel); - ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START); - - for (;;) { - val = ucb1400_reg_read(ucb, UCB_ADC_DATA); - if (val & UCB_ADC_DAT_VALID) - break; - /* yield to other processes */ - schedule_timeout_uninterruptible(1); - } - - return UCB_ADC_DAT_VALUE(val); -} - -static inline void ucb1400_adc_disable(struct ucb1400 *ucb) -{ - ucb1400_reg_write(ucb, UCB_ADC_CR, 0); -} - /* Switch to interrupt mode. */ -static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb) +static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97) { - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ac97, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_INT); @@ -152,14 +48,14 @@ static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb) * Switch to pressure mode, and read pressure. We don't need to wait * here, since both plates are being driven. */ -static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb) +static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); udelay(ts_delay_pressure); - return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY); + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync); } /* @@ -168,21 +64,21 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb) * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ -static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb) +static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); udelay(ts_delay); - return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY); + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync); } /* @@ -191,63 +87,63 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb) * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ -static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb) +static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); udelay(ts_delay); - return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX); + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync); } /* * Switch to X plate resistance mode. Set MX to ground, PX to * supply. Measure current. */ -static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb) +static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); - return ucb1400_adc_read(ucb, 0); + return ucb1400_adc_read(ucb->ac97, 0, adcsync); } /* * Switch to Y plate resistance mode. Set MY to ground, PY to * supply. Measure current. */ -static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb) +static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ucb, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); - return ucb1400_adc_read(ucb, 0); + return ucb1400_adc_read(ucb->ac97, 0, adcsync); } -static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb) +static inline int ucb1400_ts_pen_down(struct snd_ac97 *ac97) { - unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR); - return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW)); + unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR); + return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW); } -static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb) +static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97) { - ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0); - ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX); + ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX); + ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0); + ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX); } -static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb) +static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97) { - ucb1400_reg_write(ucb, UCB_IE_FAL, 0); + ucb1400_reg_write(ac97, UCB_IE_FAL, 0); } static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y) @@ -264,25 +160,24 @@ static void ucb1400_ts_event_release(struct input_dev *idev) input_sync(idev); } -static void ucb1400_handle_pending_irq(struct ucb1400 *ucb) +static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb) { unsigned int isr; - isr = ucb1400_reg_read(ucb, UCB_IE_STATUS); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0); + isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); - if (isr & UCB_IE_TSPX) - ucb1400_ts_irq_disable(ucb); - else + if (isr & UCB_IE_TSPX) { + ucb1400_ts_irq_disable(ucb->ac97); + enable_irq(ucb->irq); + } else printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr); - - enable_irq(ucb->irq); } static int ucb1400_ts_thread(void *_ucb) { - struct ucb1400 *ucb = _ucb; + struct ucb1400_ts *ucb = _ucb; struct task_struct *tsk = current; int valid = 0; struct sched_param param = { .sched_priority = 1 }; @@ -301,19 +196,19 @@ static int ucb1400_ts_thread(void *_ucb) ucb1400_handle_pending_irq(ucb); } - ucb1400_adc_enable(ucb); + ucb1400_adc_enable(ucb->ac97); x = ucb1400_ts_read_xpos(ucb); y = ucb1400_ts_read_ypos(ucb); p = ucb1400_ts_read_pressure(ucb); - ucb1400_adc_disable(ucb); + ucb1400_adc_disable(ucb->ac97); /* Switch back to interrupt mode. */ - ucb1400_ts_mode_int(ucb); + ucb1400_ts_mode_int(ucb->ac97); msleep(10); - if (ucb1400_ts_pen_down(ucb)) { - ucb1400_ts_irq_enable(ucb); + if (ucb1400_ts_pen_down(ucb->ac97)) { + ucb1400_ts_irq_enable(ucb->ac97); /* * If we spat out a valid sample set last time, @@ -332,8 +227,8 @@ static int ucb1400_ts_thread(void *_ucb) } wait_event_freezable_timeout(ucb->ts_wait, - ucb->irq_pending || ucb->ts_restart || kthread_should_stop(), - timeout); + ucb->irq_pending || ucb->ts_restart || + kthread_should_stop(), timeout); } /* Send the "pen off" if we are stopping with the pen still active */ @@ -356,7 +251,7 @@ static int ucb1400_ts_thread(void *_ucb) */ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) { - struct ucb1400 *ucb = devid; + struct ucb1400_ts *ucb = devid; if (irqnr == ucb->irq) { disable_irq(ucb->irq); @@ -369,7 +264,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) static int ucb1400_ts_open(struct input_dev *idev) { - struct ucb1400 *ucb = input_get_drvdata(idev); + struct ucb1400_ts *ucb = input_get_drvdata(idev); int ret = 0; BUG_ON(ucb->ts_task); @@ -385,34 +280,14 @@ static int ucb1400_ts_open(struct input_dev *idev) static void ucb1400_ts_close(struct input_dev *idev) { - struct ucb1400 *ucb = input_get_drvdata(idev); + struct ucb1400_ts *ucb = input_get_drvdata(idev); if (ucb->ts_task) kthread_stop(ucb->ts_task); - ucb1400_ts_irq_disable(ucb); - ucb1400_reg_write(ucb, UCB_TS_CR, 0); -} - -#ifdef CONFIG_PM -static int ucb1400_ts_resume(struct device *dev) -{ - struct ucb1400 *ucb = dev_get_drvdata(dev); - - if (ucb->ts_task) { - /* - * Restart the TS thread to ensure the - * TS interrupt mode is set up again - * after sleep. - */ - ucb->ts_restart = 1; - wake_up(&ucb->ts_wait); - } - return 0; + ucb1400_ts_irq_disable(ucb->ac97); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0); } -#else -#define ucb1400_ts_resume NULL -#endif #ifndef NO_IRQ #define NO_IRQ 0 @@ -422,25 +297,26 @@ static int ucb1400_ts_resume(struct device *dev) * Try to probe our interrupt, rather than relying on lots of * hard-coded machine dependencies. */ -static int ucb1400_detect_irq(struct ucb1400 *ucb) +static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb) { unsigned long mask, timeout; mask = probe_irq_on(); /* Enable the ADC interrupt. */ - ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC); - ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); /* Cause an ADC interrupt. */ - ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA); - ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START); + ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA); + ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START); /* Wait for the conversion to complete. */ timeout = jiffies + HZ/2; - while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) { + while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) & + UCB_ADC_DAT_VALID)) { cpu_relax(); if (time_after(jiffies, timeout)) { printk(KERN_ERR "ucb1400: timed out in IRQ probe\n"); @@ -448,13 +324,13 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb) return -ENODEV; } } - ucb1400_reg_write(ucb, UCB_ADC_CR, 0); + ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0); /* Disable and clear interrupt. */ - ucb1400_reg_write(ucb, UCB_IE_RIS, 0); - ucb1400_reg_write(ucb, UCB_IE_FAL, 0); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff); - ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); /* Read triggered interrupt. */ ucb->irq = probe_irq_off(mask); @@ -464,36 +340,25 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb) return 0; } -static int ucb1400_ts_probe(struct device *dev) +static int ucb1400_ts_probe(struct platform_device *dev) { - struct ucb1400 *ucb; - struct input_dev *idev; - int error, id, x_res, y_res; + int error, x_res, y_res; + struct ucb1400_ts *ucb = dev->dev.platform_data; - ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL); - idev = input_allocate_device(); - if (!ucb || !idev) { + ucb->ts_idev = input_allocate_device(); + if (!ucb->ts_idev) { error = -ENOMEM; - goto err_free_devs; + goto err; } - ucb->ts_idev = idev; - ucb->adcsync = adcsync; - ucb->ac97 = to_ac97_t(dev); - init_waitqueue_head(&ucb->ts_wait); - - id = ucb1400_reg_read(ucb, UCB_ID); - if (id != UCB_ID_1400) { - error = -ENODEV; - goto err_free_devs; - } - - error = ucb1400_detect_irq(ucb); + error = ucb1400_ts_detect_irq(ucb); if (error) { printk(KERN_ERR "UCB1400: IRQ probe failed\n"); goto err_free_devs; } + init_waitqueue_head(&ucb->ts_wait); + error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING, "UCB1400", ucb); if (error) { @@ -503,80 +368,101 @@ static int ucb1400_ts_probe(struct device *dev) } printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq); - input_set_drvdata(idev, ucb); + input_set_drvdata(ucb->ts_idev, ucb); - idev->dev.parent = dev; - idev->name = "UCB1400 touchscreen interface"; - idev->id.vendor = ucb1400_reg_read(ucb, AC97_VENDOR_ID1); - idev->id.product = id; - idev->open = ucb1400_ts_open; - idev->close = ucb1400_ts_close; - idev->evbit[0] = BIT_MASK(EV_ABS); + ucb->ts_idev->dev.parent = &dev->dev; + ucb->ts_idev->name = "UCB1400 touchscreen interface"; + ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97, + AC97_VENDOR_ID1); + ucb->ts_idev->id.product = ucb->id; + ucb->ts_idev->open = ucb1400_ts_open; + ucb->ts_idev->close = ucb1400_ts_close; + ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS); - ucb1400_adc_enable(ucb); + ucb1400_adc_enable(ucb->ac97); x_res = ucb1400_ts_read_xres(ucb); y_res = ucb1400_ts_read_yres(ucb); - ucb1400_adc_disable(ucb); + ucb1400_adc_disable(ucb->ac97); printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res); - input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0); - input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0); - input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0); + input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0); + input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0); + input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0); - error = input_register_device(idev); + error = input_register_device(ucb->ts_idev); if (error) goto err_free_irq; - dev_set_drvdata(dev, ucb); return 0; - err_free_irq: +err_free_irq: free_irq(ucb->irq, ucb); - err_free_devs: - input_free_device(idev); - kfree(ucb); +err_free_devs: + input_free_device(ucb->ts_idev); +err: return error; + } -static int ucb1400_ts_remove(struct device *dev) +static int ucb1400_ts_remove(struct platform_device *dev) { - struct ucb1400 *ucb = dev_get_drvdata(dev); + struct ucb1400_ts *ucb = dev->dev.platform_data; free_irq(ucb->irq, ucb); input_unregister_device(ucb->ts_idev); - dev_set_drvdata(dev, NULL); - kfree(ucb); return 0; } -static struct device_driver ucb1400_ts_driver = { - .name = "ucb1400_ts", - .owner = THIS_MODULE, - .bus = &ac97_bus_type, - .probe = ucb1400_ts_probe, - .remove = ucb1400_ts_remove, - .resume = ucb1400_ts_resume, +#ifdef CONFIG_PM +static int ucb1400_ts_resume(struct platform_device *dev) +{ + struct ucb1400_ts *ucb = platform_get_drvdata(dev); + + if (ucb->ts_task) { + /* + * Restart the TS thread to ensure the + * TS interrupt mode is set up again + * after sleep. + */ + ucb->ts_restart = 1; + wake_up(&ucb->ts_wait); + } + return 0; +} +#else +#define ucb1400_ts_resume NULL +#endif + +static struct platform_driver ucb1400_ts_driver = { + .probe = ucb1400_ts_probe, + .remove = ucb1400_ts_remove, + .resume = ucb1400_ts_resume, + .driver = { + .name = "ucb1400_ts", + }, }; static int __init ucb1400_ts_init(void) { - return driver_register(&ucb1400_ts_driver); + return platform_driver_register(&ucb1400_ts_driver); } static void __exit ucb1400_ts_exit(void) { - driver_unregister(&ucb1400_ts_driver); + platform_driver_unregister(&ucb1400_ts_driver); } module_param(adcsync, bool, 0444); MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin."); module_param(ts_delay, int, 0444); -MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us."); +MODULE_PARM_DESC(ts_delay, "Delay between panel setup and" + " position read. Default = 55us."); module_param(ts_delay_pressure, int, 0444); MODULE_PARM_DESC(ts_delay_pressure, - "delay between panel setup and pressure read. Default = 0us."); + "delay between panel setup and pressure read." + " Default = 0us."); module_init(ucb1400_ts_init); module_exit(ucb1400_ts_exit); |
