diff options
Diffstat (limited to 'drivers/input/keyboard/lm8323.c')
| -rw-r--r-- | drivers/input/keyboard/lm8323.c | 878 |
1 files changed, 878 insertions, 0 deletions
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c new file mode 100644 index 000000000000..574eda2a4957 --- /dev/null +++ b/drivers/input/keyboard/lm8323.c @@ -0,0 +1,878 @@ +/* + * drivers/i2c/chips/lm8323.c + * + * Copyright (C) 2007-2009 Nokia Corporation + * + * Written by Daniel Stone <daniel.stone@nokia.com> + * Timo O. Karjalainen <timo.o.karjalainen@nokia.com> + * + * Updated by Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation (version 2 of the License only). + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/i2c/lm8323.h> + +/* Commands to send to the chip. */ +#define LM8323_CMD_READ_ID 0x80 /* Read chip ID. */ +#define LM8323_CMD_WRITE_CFG 0x81 /* Set configuration item. */ +#define LM8323_CMD_READ_INT 0x82 /* Get interrupt status. */ +#define LM8323_CMD_RESET 0x83 /* Reset, same as external one */ +#define LM8323_CMD_WRITE_PORT_SEL 0x85 /* Set GPIO in/out. */ +#define LM8323_CMD_WRITE_PORT_STATE 0x86 /* Set GPIO pullup. */ +#define LM8323_CMD_READ_PORT_SEL 0x87 /* Get GPIO in/out. */ +#define LM8323_CMD_READ_PORT_STATE 0x88 /* Get GPIO pullup. */ +#define LM8323_CMD_READ_FIFO 0x89 /* Read byte from FIFO. */ +#define LM8323_CMD_RPT_READ_FIFO 0x8a /* Read FIFO (no increment). */ +#define LM8323_CMD_SET_ACTIVE 0x8b /* Set active time. */ +#define LM8323_CMD_READ_ERR 0x8c /* Get error status. */ +#define LM8323_CMD_READ_ROTATOR 0x8e /* Read rotator status. */ +#define LM8323_CMD_SET_DEBOUNCE 0x8f /* Set debouncing time. */ +#define LM8323_CMD_SET_KEY_SIZE 0x90 /* Set keypad size. */ +#define LM8323_CMD_READ_KEY_SIZE 0x91 /* Get keypad size. */ +#define LM8323_CMD_READ_CFG 0x92 /* Get configuration item. */ +#define LM8323_CMD_WRITE_CLOCK 0x93 /* Set clock config. */ +#define LM8323_CMD_READ_CLOCK 0x94 /* Get clock config. */ +#define LM8323_CMD_PWM_WRITE 0x95 /* Write PWM script. */ +#define LM8323_CMD_START_PWM 0x96 /* Start PWM engine. */ +#define LM8323_CMD_STOP_PWM 0x97 /* Stop PWM engine. */ + +/* Interrupt status. */ +#define INT_KEYPAD 0x01 /* Key event. */ +#define INT_ROTATOR 0x02 /* Rotator event. */ +#define INT_ERROR 0x08 /* Error: use CMD_READ_ERR. */ +#define INT_NOINIT 0x10 /* Lost configuration. */ +#define INT_PWM1 0x20 /* PWM1 stopped. */ +#define INT_PWM2 0x40 /* PWM2 stopped. */ +#define INT_PWM3 0x80 /* PWM3 stopped. */ + +/* Errors (signalled by INT_ERROR, read with CMD_READ_ERR). */ +#define ERR_BADPAR 0x01 /* Bad parameter. */ +#define ERR_CMDUNK 0x02 /* Unknown command. */ +#define ERR_KEYOVR 0x04 /* Too many keys pressed. */ +#define ERR_FIFOOVER 0x40 /* FIFO overflow. */ + +/* Configuration keys (CMD_{WRITE,READ}_CFG). */ +#define CFG_MUX1SEL 0x01 /* Select MUX1_OUT input. */ +#define CFG_MUX1EN 0x02 /* Enable MUX1_OUT. */ +#define CFG_MUX2SEL 0x04 /* Select MUX2_OUT input. */ +#define CFG_MUX2EN 0x08 /* Enable MUX2_OUT. */ +#define CFG_PSIZE 0x20 /* Package size (must be 0). */ +#define CFG_ROTEN 0x40 /* Enable rotator. */ + +/* Clock settings (CMD_{WRITE,READ}_CLOCK). */ +#define CLK_RCPWM_INTERNAL 0x00 +#define CLK_RCPWM_EXTERNAL 0x03 +#define CLK_SLOWCLKEN 0x08 /* Enable 32.768kHz clock. */ +#define CLK_SLOWCLKOUT 0x40 /* Enable slow pulse output. */ + +/* The possible addresses corresponding to CONFIG1 and CONFIG2 pin wirings. */ +#define LM8323_I2C_ADDR00 (0x84 >> 1) /* 1000 010x */ +#define LM8323_I2C_ADDR01 (0x86 >> 1) /* 1000 011x */ +#define LM8323_I2C_ADDR10 (0x88 >> 1) /* 1000 100x */ +#define LM8323_I2C_ADDR11 (0x8A >> 1) /* 1000 101x */ + +/* Key event fifo length */ +#define LM8323_FIFO_LEN 15 + +/* Commands for PWM engine; feed in with PWM_WRITE. */ +/* Load ramp counter from duty cycle field (range 0 - 0xff). */ +#define PWM_SET(v) (0x4000 | ((v) & 0xff)) +/* Go to start of script. */ +#define PWM_GOTOSTART 0x0000 +/* + * Stop engine (generates interrupt). If reset is 1, clear the program + * counter, else leave it. + */ +#define PWM_END(reset) (0xc000 | (!!(reset) << 11)) +/* + * Ramp. If s is 1, divide clock by 512, else divide clock by 16. + * Take t clock scales (up to 63) per step, for n steps (up to 126). + * If u is set, ramp up, else ramp down. + */ +#define PWM_RAMP(s, t, n, u) ((!!(s) << 14) | ((t) & 0x3f) << 8 | \ + ((n) & 0x7f) | ((u) ? 0 : 0x80)) +/* + * Loop (i.e. jump back to pos) for a given number of iterations (up to 63). + * If cnt is zero, execute until PWM_END is encountered. + */ +#define PWM_LOOP(cnt, pos) (0xa000 | (((cnt) & 0x3f) << 7) | \ + ((pos) & 0x3f)) +/* + * Wait for trigger. Argument is a mask of channels, shifted by the channel + * number, e.g. 0xa for channels 3 and 1. Note that channels are numbered + * from 1, not 0. + */ +#define PWM_WAIT_TRIG(chans) (0xe000 | (((chans) & 0x7) << 6)) +/* Send trigger. Argument is same as PWM_WAIT_TRIG. */ +#define PWM_SEND_TRIG(chans) (0xe000 | ((chans) & 0x7)) + +struct lm8323_pwm { + int id; + int fade_time; + int brightness; + int desired_brightness; + bool enabled; + bool running; + /* pwm lock */ + struct mutex lock; + struct work_struct work; + struct led_classdev cdev; + struct lm8323_chip *chip; +}; + +struct lm8323_chip { + /* device lock */ + struct mutex lock; + struct i2c_client *client; + struct work_struct work; + struct input_dev *idev; + bool kp_enabled; + bool pm_suspend; + unsigned keys_down; + char phys[32]; + unsigned short keymap[LM8323_KEYMAP_SIZE]; + int size_x; + int size_y; + int debounce_time; + int active_time; + struct lm8323_pwm pwm[LM8323_NUM_PWMS]; +}; + +#define client_to_lm8323(c) container_of(c, struct lm8323_chip, client) +#define dev_to_lm8323(d) container_of(d, struct lm8323_chip, client->dev) +#define work_to_lm8323(w) container_of(w, struct lm8323_chip, work) +#define cdev_to_pwm(c) container_of(c, struct lm8323_pwm, cdev) +#define work_to_pwm(w) container_of(w, struct lm8323_pwm, work) + +#define LM8323_MAX_DATA 8 + +/* + * To write, we just access the chip's address in write mode, and dump the + * command and data out on the bus. The command byte and data are taken as + * sequential u8s out of varargs, to a maximum of LM8323_MAX_DATA. + */ +static int lm8323_write(struct lm8323_chip *lm, int len, ...) +{ + int ret, i; + va_list ap; + u8 data[LM8323_MAX_DATA]; + + va_start(ap, len); + + if (unlikely(len > LM8323_MAX_DATA)) { + dev_err(&lm->client->dev, "tried to send %d bytes\n", len); + va_end(ap); + return 0; + } + + for (i = 0; i < len; i++) + data[i] = va_arg(ap, int); + + va_end(ap); + + /* + * If the host is asleep while we send the data, we can get a NACK + * back while it wakes up, so try again, once. + */ + ret = i2c_master_send(lm->client, data, len); + if (unlikely(ret == -EREMOTEIO)) + ret = i2c_master_send(lm->client, data, len); + if (unlikely(ret != len)) + dev_err(&lm->client->dev, "sent %d bytes of %d total\n", + len, ret); + + return ret; +} + +/* + * To read, we first send the command byte to the chip and end the transaction, + * then access the chip in read mode, at which point it will send the data. + */ +static int lm8323_read(struct lm8323_chip *lm, u8 cmd, u8 *buf, int len) +{ + int ret; + + /* + * If the host is asleep while we send the byte, we can get a NACK + * back while it wakes up, so try again, once. + */ + ret = i2c_master_send(lm->client, &cmd, 1); + if (unlikely(ret == -EREMOTEIO)) + ret = i2c_master_send(lm->client, &cmd, 1); + if (unlikely(ret != 1)) { + dev_err(&lm->client->dev, "sending read cmd 0x%02x failed\n", + cmd); + return 0; + } + + ret = i2c_master_recv(lm->client, buf, len); + if (unlikely(ret != len)) + dev_err(&lm->client->dev, "wanted %d bytes, got %d\n", + len, ret); + + return ret; +} + +/* + * Set the chip active time (idle time before it enters halt). + */ +static void lm8323_set_active_time(struct lm8323_chip *lm, int time) +{ + lm8323_write(lm, 2, LM8323_CMD_SET_ACTIVE, time >> 2); +} + +/* + * The signals are AT-style: the low 7 bits are the keycode, and the top + * bit indicates the state (1 for down, 0 for up). + */ +static inline u8 lm8323_whichkey(u8 event) +{ + return event & 0x7f; +} + +static inline int lm8323_ispress(u8 event) +{ + return (event & 0x80) ? 1 : 0; +} + +static void process_keys(struct lm8323_chip *lm) +{ + u8 event; + u8 key_fifo[LM8323_FIFO_LEN + 1]; + int old_keys_down = lm->keys_down; + int ret; + int i = 0; + + /* + * Read all key events from the FIFO at once. Next READ_FIFO clears the + * FIFO even if we didn't read all events previously. + */ + ret = lm8323_read(lm, LM8323_CMD_READ_FIFO, key_fifo, LM8323_FIFO_LEN); + + if (ret < 0) { + dev_err(&lm->client->dev, "Failed reading fifo \n"); + return; + } + key_fifo[ret] = 0; + + while ((event = key_fifo[i++])) { + u8 key = lm8323_whichkey(event); + int isdown = lm8323_ispress(event); + unsigned short keycode = lm->keymap[key]; + + dev_vdbg(&lm->client->dev, "key 0x%02x %s\n", + key, isdown ? "down" : "up"); + + if (lm->kp_enabled) { + input_event(lm->idev, EV_MSC, MSC_SCAN, key); + input_report_key(lm->idev, keycode, isdown); + input_sync(lm->idev); + } + + if (isdown) + lm->keys_down++; + else + lm->keys_down--; + } + + /* + * Errata: We need to ensure that the chip never enters halt mode + * during a keypress, so set active time to 0. When it's released, + * we can enter halt again, so set the active time back to normal. + */ + if (!old_keys_down && lm->keys_down) + lm8323_set_active_time(lm, 0); + if (old_keys_down && !lm->keys_down) + lm8323_set_active_time(lm, lm->active_time); +} + +static void lm8323_process_error(struct lm8323_chip *lm) +{ + u8 error; + + if (lm8323_read(lm, LM8323_CMD_READ_ERR, &error, 1) == 1) { + if (error & ERR_FIFOOVER) + dev_vdbg(&lm->client->dev, "fifo overflow!\n"); + if (error & ERR_KEYOVR) + dev_vdbg(&lm->client->dev, + "more than two keys pressed\n"); + if (error & ERR_CMDUNK) + dev_vdbg(&lm->client->dev, + "unknown command submitted\n"); + if (error & ERR_BADPAR) + dev_vdbg(&lm->client->dev, "bad command parameter\n"); + } +} + +static void lm8323_reset(struct lm8323_chip *lm) +{ + /* The docs say we must pass 0xAA as the data byte. */ + lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA); +} + +static int lm8323_configure(struct lm8323_chip *lm) +{ + int keysize = (lm->size_x << 4) | lm->size_y; + int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL); + int debounce = lm->debounce_time >> 2; + int active = lm->active_time >> 2; + + /* + * Active time must be greater than the debounce time: if it's + * a close-run thing, give ourselves a 12ms buffer. + */ + if (debounce >= active) + active = debounce + 3; + + lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0); + lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock); + lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize); + lm8323_set_active_time(lm, lm->active_time); + lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce); + lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff); + lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0); + + /* + * Not much we can do about errors at this point, so just hope + * for the best. + */ + + return 0; +} + +static void pwm_done(struct lm8323_pwm *pwm) +{ + mutex_lock(&pwm->lock); + pwm->running = false; + if (pwm->desired_brightness != pwm->brightness) + schedule_work(&pwm->work); + mutex_unlock(&pwm->lock); +} + +/* + * Bottom half: handle the interrupt by posting key events, or dealing with + * errors appropriately. + */ +static void lm8323_work(struct work_struct *work) +{ + struct lm8323_chip *lm = work_to_lm8323(work); + u8 ints; + int i; + + mutex_lock(&lm->lock); + + while ((lm8323_read(lm, LM8323_CMD_READ_INT, &ints, 1) == 1) && ints) { + if (likely(ints & INT_KEYPAD)) + process_keys(lm); + if (ints & INT_ROTATOR) { + /* We don't currently support the rotator. */ + dev_vdbg(&lm->client->dev, "rotator fired\n"); + } + if (ints & INT_ERROR) { + dev_vdbg(&lm->client->dev, "error!\n"); + lm8323_process_error(lm); + } + if (ints & INT_NOINIT) { + dev_err(&lm->client->dev, "chip lost config; " + "reinitialising\n"); + lm8323_configure(lm); + } + for (i = 0; i < LM8323_NUM_PWMS; i++) { + if (ints & (1 << (INT_PWM1 + i))) { + dev_vdbg(&lm->client->dev, + "pwm%d engine completed\n", i); + pwm_done(&lm->pwm[i]); + } + } + } + + mutex_unlock(&lm->lock); +} + +/* + * We cannot use I2C in interrupt context, so we just schedule work. + */ +static irqreturn_t lm8323_irq(int irq, void *data) +{ + struct lm8323_chip *lm = data; + + schedule_work(&lm->work); + + return IRQ_HANDLED; +} + +/* + * Read the chip ID. + */ +static int lm8323_read_id(struct lm8323_chip *lm, u8 *buf) +{ + int bytes; + + bytes = lm8323_read(lm, LM8323_CMD_READ_ID, buf, 2); + if (unlikely(bytes != 2)) + return -EIO; + + return 0; +} + +static void lm8323_write_pwm_one(struct lm8323_pwm *pwm, int pos, u16 cmd) +{ + lm8323_write(pwm->chip, 4, LM8323_CMD_PWM_WRITE, (pos << 2) | pwm->id, + (cmd & 0xff00) >> 8, cmd & 0x00ff); +} + +/* + * Write a script into a given PWM engine, concluding with PWM_END. + * If 'kill' is nonzero, the engine will be shut down at the end + * of the script, producing a zero output. Otherwise the engine + * will be kept running at the final PWM level indefinitely. + */ +static void lm8323_write_pwm(struct lm8323_pwm *pwm, int kill, + int len, const u16 *cmds) +{ + int i; + + for (i = 0; i < len; i++) + lm8323_write_pwm_one(pwm, i, cmds[i]); + + lm8323_write_pwm_one(pwm, i++, PWM_END(kill)); + lm8323_write(pwm->chip, 2, LM8323_CMD_START_PWM, pwm->id); + pwm->running = true; +} + +static void lm8323_pwm_work(struct work_struct *work) +{ + struct lm8323_pwm *pwm = work_to_pwm(work); + int div512, perstep, steps, hz, up, kill; + u16 pwm_cmds[3]; + int num_cmds = 0; + + mutex_lock(&pwm->lock); + + /* + * Do nothing if we're already at the requested level, + * or previous setting is not yet complete. In the latter + * case we will be called again when the previous PWM script + * finishes. + */ + if (pwm->running || pwm->desired_brightness == pwm->brightness) + goto out; + + kill = (pwm->desired_brightness == 0); + up = (pwm->desired_brightness > pwm->brightness); + steps = abs(pwm->desired_brightness - pwm->brightness); + + /* + * Convert time (in ms) into a divisor (512 or 16 on a refclk of + * 32768Hz), and number of ticks per step. + */ + if ((pwm->fade_time / steps) > (32768 / 512)) { + div512 = 1; + hz = 32768 / 512; + } else { + div512 = 0; + hz = 32768 / 16; + } + + perstep = (hz * pwm->fade_time) / (steps * 1000); + + if (perstep == 0) + perstep = 1; + else if (perstep > 63) + perstep = 63; + + while (steps) { + int s; + + s = min(126, steps); + pwm_cmds[num_cmds++] = PWM_RAMP(div512, perstep, s, up); + steps -= s; + } + + lm8323_write_pwm(pwm, kill, num_cmds, pwm_cmds); + pwm->brightness = pwm->desired_brightness; + + out: + mutex_unlock(&pwm->lock); +} + +static void lm8323_pwm_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + struct lm8323_chip *lm = pwm->chip; + + mutex_lock(&pwm->lock); + pwm->desired_brightness = brightness; + mutex_unlock(&pwm->lock); + + if (in_interrupt()) { + schedule_work(&pwm->work); + } else { + /* + * Schedule PWM work as usual unless we are going into suspend + */ + mutex_lock(&lm->lock); + if (likely(!lm->pm_suspend)) + schedule_work(&pwm->work); + else + lm8323_pwm_work(&pwm->work); + mutex_unlock(&lm->lock); + } +} + +static ssize_t lm8323_pwm_show_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + + return sprintf(buf, "%d\n", pwm->fade_time); +} + +static ssize_t lm8323_pwm_store_time(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); + int ret; + unsigned long time; + + ret = strict_strtoul(buf, 10, &time); + /* Numbers only, please. */ + if (ret) + return -EINVAL; + + pwm->fade_time = time; + + return strlen(buf); +} +static DEVICE_ATTR(time, 0644, lm8323_pwm_show_time, lm8323_pwm_store_time); + +static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev, + const char *name) +{ + struct lm8323_pwm *pwm; + + BUG_ON(id > 3); + + pwm = &lm->pwm[id - 1]; + + pwm->id = id; + pwm->fade_time = 0; + pwm->brightness = 0; + pwm->desired_brightness = 0; + pwm->running = false; + pwm->enabled = false; + INIT_WORK(&pwm->work, lm8323_pwm_work); + mutex_init(&pwm->lock); + pwm->chip = lm; + + if (name) { + pwm->cdev.name = name; + pwm->cdev.brightness_set = lm8323_pwm_set_brightness; + if (led_classdev_register(dev, &pwm->cdev) < 0) { + dev_err(dev, "couldn't register PWM %d\n", id); + return -1; + } + if (device_create_file(pwm->cdev.dev, + &dev_attr_time) < 0) { + dev_err(dev, "couldn't register time attribute\n"); + led_classdev_unregister(&pwm->cdev); + return -1; + } + pwm->enabled = true; + } + + return 0; +} + +static struct i2c_driver lm8323_i2c_driver; + +static ssize_t lm8323_show_disable(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm8323_chip *lm = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", !lm->kp_enabled); +} + +static ssize_t lm8323_set_disable(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct lm8323_chip *lm = dev_get_drvdata(dev); + int ret; + unsigned long i; + + ret = strict_strtoul(buf, 10, &i); + + mutex_lock(&lm->lock); + lm->kp_enabled = !i; + mutex_unlock(&lm->lock); + + return count; +} +static DEVICE_ATTR(disable_kp, 0644, lm8323_show_disable, lm8323_set_disable); + +static int __devinit lm8323_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm8323_platform_data *pdata = client->dev.platform_data; + struct input_dev *idev; + struct lm8323_chip *lm; + int i, err; + unsigned long tmo; + u8 data[2]; + + if (!pdata || !pdata->size_x || !pdata->size_y) { + dev_err(&client->dev, "missing platform_data\n"); + return -EINVAL; + } + + if (pdata->size_x > 8) { + dev_err(&client->dev, "invalid x size %d specified\n", + pdata->size_x); + return -EINVAL; + } + + if (pdata->size_y > 12) { + dev_err(&client->dev, "invalid y size %d specified\n", + pdata->size_y); + return -EINVAL; + } + + lm = kzalloc(sizeof *lm, GFP_KERNEL); + idev = input_allocate_device(); + if (!lm || !idev) { + err = -ENOMEM; + goto fail1; + } + + i2c_set_clientdata(client, lm); + + lm->client = client; + lm->idev = idev; + mutex_init(&lm->lock); + INIT_WORK(&lm->work, lm8323_work); + + lm->size_x = pdata->size_x; + lm->size_y = pdata->size_y; + dev_vdbg(&client->dev, "Keypad size: %d x %d\n", + lm->size_x, lm->size_y); + + lm->debounce_time = pdata->debounce_time; + lm->active_time = pdata->active_time; + + lm8323_reset(lm); + + /* Nothing's set up to service the IRQ yet, so just spin for max. + * 100ms until we can configure. */ + tmo = jiffies + msecs_to_jiffies(100); + while (lm8323_read(lm, LM8323_CMD_READ_INT, data, 1) == 1) { + if (data[0] & INT_NOINIT) + break; + + if (time_after(jiffies, tmo)) { + dev_err(&client->dev, + "timeout waiting for initialisation\n"); + break; + } + + msleep(1); + } + + lm8323_configure(lm); + + /* If a true probe check the device */ + if (lm8323_read_id(lm, data) != 0) { + dev_err(&client->dev, "device not found\n"); + err = -ENODEV; + goto fail1; + } + + for (i = 0; i < LM8323_NUM_PWMS; i++) { + err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]); + if (err < 0) + goto fail2; + } + + lm->kp_enabled = true; + err = device_create_file(&client->dev, &dev_attr_disable_kp); + if (err < 0) + goto fail2; + + idev->name = pdata->name ? : "LM8323 keypad"; + snprintf(lm->phys, sizeof(lm->phys), + "%s/input-kp", dev_name(&client->dev)); + idev->phys = lm->phys; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_MSC); + __set_bit(MSC_SCAN, idev->mscbit); + for (i = 0; i < LM8323_KEYMAP_SIZE; i++) { + __set_bit(pdata->keymap[i], idev->keybit); + lm->keymap[i] = pdata->keymap[i]; + } + __clear_bit(KEY_RESERVED, idev->keybit); + + if (pdata->repeat) + __set_bit(EV_REP, idev->evbit); + + err = input_register_device(idev); + if (err) { + dev_dbg(&client->dev, "error registering input device\n"); + goto fail3; + } + + err = request_irq(client->irq, lm8323_irq, + IRQF_TRIGGER_FALLING | IRQF_DISABLED, + "lm8323", lm); + if (err) { + dev_err(&client->dev, "could not get IRQ %d\n", client->irq); + goto fail4; + } + + device_init_wakeup(&client->dev, 1); + enable_irq_wake(client->irq); + + return 0; + +fail4: + input_unregister_device(idev); + idev = NULL; +fail3: + device_remove_file(&client->dev, &dev_attr_disable_kp); +fail2: + while (--i >= 0) + if (lm->pwm[i].enabled) + led_classdev_unregister(&lm->pwm[i].cdev); +fail1: + input_free_device(idev); + kfree(lm); + return err; +} + +static int __devexit lm8323_remove(struct i2c_client *client) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + disable_irq_wake(client->irq); + free_irq(client->irq, lm); + cancel_work_sync(&lm->work); + + input_unregister_device(lm->idev); + + device_remove_file(&lm->client->dev, &dev_attr_disable_kp); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_unregister(&lm->pwm[i].cdev); + + kfree(lm); + + return 0; +} + +#ifdef CONFIG_PM +/* + * We don't need to explicitly suspend the chip, as it already switches off + * when there's no activity. + */ +static int lm8323_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + set_irq_wake(client->irq, 0); + disable_irq(client->irq); + + mutex_lock(&lm->lock); + lm->pm_suspend = true; + mutex_unlock(&lm->lock); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_suspend(&lm->pwm[i].cdev); + + return 0; +} + +static int lm8323_resume(struct i2c_client *client) +{ + struct lm8323_chip *lm = i2c_get_clientdata(client); + int i; + + mutex_lock(&lm->lock); + lm->pm_suspend = false; + mutex_unlock(&lm->lock); + + for (i = 0; i < 3; i++) + if (lm->pwm[i].enabled) + led_classdev_resume(&lm->pwm[i].cdev); + + enable_irq(client->irq); + set_irq_wake(client->irq, 1); + + return 0; +} +#else +#define lm8323_suspend NULL +#define lm8323_resume NULL +#endif + +static const struct i2c_device_id lm8323_id[] = { + { "lm8323", 0 }, + { } +}; + +static struct i2c_driver lm8323_i2c_driver = { + .driver = { + .name = "lm8323", + }, + .probe = lm8323_probe, + .remove = __devexit_p(lm8323_remove), + .suspend = lm8323_suspend, + .resume = lm8323_resume, + .id_table = lm8323_id, +}; +MODULE_DEVICE_TABLE(i2c, lm8323_id); + +static int __init lm8323_init(void) +{ + return i2c_add_driver(&lm8323_i2c_driver); +} +module_init(lm8323_init); + +static void __exit lm8323_exit(void) +{ + i2c_del_driver(&lm8323_i2c_driver); +} +module_exit(lm8323_exit); + +MODULE_AUTHOR("Timo O. Karjalainen <timo.o.karjalainen@nokia.com>"); +MODULE_AUTHOR("Daniel Stone"); +MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); +MODULE_DESCRIPTION("LM8323 keypad driver"); +MODULE_LICENSE("GPL"); + |
