diff options
Diffstat (limited to 'drivers/input/keyboard/cap1106.c')
| -rw-r--r-- | drivers/input/keyboard/cap1106.c | 341 |
1 files changed, 0 insertions, 341 deletions
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c deleted file mode 100644 index d70b65a14ced..000000000000 --- a/drivers/input/keyboard/cap1106.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor - * - * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106 - * - * (c) 2014 Daniel Mack <linux@zonque.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/of_irq.h> -#include <linux/regmap.h> -#include <linux/i2c.h> -#include <linux/gpio/consumer.h> - -#define CAP1106_REG_MAIN_CONTROL 0x00 -#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT (6) -#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK (0xc0) -#define CAP1106_REG_MAIN_CONTROL_DLSEEP BIT(4) -#define CAP1106_REG_GENERAL_STATUS 0x02 -#define CAP1106_REG_SENSOR_INPUT 0x03 -#define CAP1106_REG_NOISE_FLAG_STATUS 0x0a -#define CAP1106_REG_SENOR_DELTA(X) (0x10 + (X)) -#define CAP1106_REG_SENSITIVITY_CONTROL 0x1f -#define CAP1106_REG_CONFIG 0x20 -#define CAP1106_REG_SENSOR_ENABLE 0x21 -#define CAP1106_REG_SENSOR_CONFIG 0x22 -#define CAP1106_REG_SENSOR_CONFIG2 0x23 -#define CAP1106_REG_SAMPLING_CONFIG 0x24 -#define CAP1106_REG_CALIBRATION 0x26 -#define CAP1106_REG_INT_ENABLE 0x27 -#define CAP1106_REG_REPEAT_RATE 0x28 -#define CAP1106_REG_MT_CONFIG 0x2a -#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b -#define CAP1106_REG_MT_PATTERN 0x2d -#define CAP1106_REG_RECALIB_CONFIG 0x2f -#define CAP1106_REG_SENSOR_THRESH(X) (0x30 + (X)) -#define CAP1106_REG_SENSOR_NOISE_THRESH 0x38 -#define CAP1106_REG_STANDBY_CHANNEL 0x40 -#define CAP1106_REG_STANDBY_CONFIG 0x41 -#define CAP1106_REG_STANDBY_SENSITIVITY 0x42 -#define CAP1106_REG_STANDBY_THRESH 0x43 -#define CAP1106_REG_CONFIG2 0x44 -#define CAP1106_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) -#define CAP1106_REG_SENSOR_CALIB (0xb1 + (X)) -#define CAP1106_REG_SENSOR_CALIB_LSB1 0xb9 -#define CAP1106_REG_SENSOR_CALIB_LSB2 0xba -#define CAP1106_REG_PRODUCT_ID 0xfd -#define CAP1106_REG_MANUFACTURER_ID 0xfe -#define CAP1106_REG_REVISION 0xff - -#define CAP1106_NUM_CHN 6 -#define CAP1106_PRODUCT_ID 0x55 -#define CAP1106_MANUFACTURER_ID 0x5d - -struct cap1106_priv { - struct regmap *regmap; - struct input_dev *idev; - - /* config */ - unsigned short keycodes[CAP1106_NUM_CHN]; -}; - -static const struct reg_default cap1106_reg_defaults[] = { - { CAP1106_REG_MAIN_CONTROL, 0x00 }, - { CAP1106_REG_GENERAL_STATUS, 0x00 }, - { CAP1106_REG_SENSOR_INPUT, 0x00 }, - { CAP1106_REG_NOISE_FLAG_STATUS, 0x00 }, - { CAP1106_REG_SENSITIVITY_CONTROL, 0x2f }, - { CAP1106_REG_CONFIG, 0x20 }, - { CAP1106_REG_SENSOR_ENABLE, 0x3f }, - { CAP1106_REG_SENSOR_CONFIG, 0xa4 }, - { CAP1106_REG_SENSOR_CONFIG2, 0x07 }, - { CAP1106_REG_SAMPLING_CONFIG, 0x39 }, - { CAP1106_REG_CALIBRATION, 0x00 }, - { CAP1106_REG_INT_ENABLE, 0x3f }, - { CAP1106_REG_REPEAT_RATE, 0x3f }, - { CAP1106_REG_MT_CONFIG, 0x80 }, - { CAP1106_REG_MT_PATTERN_CONFIG, 0x00 }, - { CAP1106_REG_MT_PATTERN, 0x3f }, - { CAP1106_REG_RECALIB_CONFIG, 0x8a }, - { CAP1106_REG_SENSOR_THRESH(0), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(1), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(2), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(3), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(4), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(5), 0x40 }, - { CAP1106_REG_SENSOR_NOISE_THRESH, 0x01 }, - { CAP1106_REG_STANDBY_CHANNEL, 0x00 }, - { CAP1106_REG_STANDBY_CONFIG, 0x39 }, - { CAP1106_REG_STANDBY_SENSITIVITY, 0x02 }, - { CAP1106_REG_STANDBY_THRESH, 0x40 }, - { CAP1106_REG_CONFIG2, 0x40 }, - { CAP1106_REG_SENSOR_CALIB_LSB1, 0x00 }, - { CAP1106_REG_SENSOR_CALIB_LSB2, 0x00 }, -}; - -static bool cap1106_volatile_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case CAP1106_REG_MAIN_CONTROL: - case CAP1106_REG_SENSOR_INPUT: - case CAP1106_REG_SENOR_DELTA(0): - case CAP1106_REG_SENOR_DELTA(1): - case CAP1106_REG_SENOR_DELTA(2): - case CAP1106_REG_SENOR_DELTA(3): - case CAP1106_REG_SENOR_DELTA(4): - case CAP1106_REG_SENOR_DELTA(5): - case CAP1106_REG_PRODUCT_ID: - case CAP1106_REG_MANUFACTURER_ID: - case CAP1106_REG_REVISION: - return true; - } - - return false; -} - -static const struct regmap_config cap1106_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = CAP1106_REG_REVISION, - .reg_defaults = cap1106_reg_defaults, - - .num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults), - .cache_type = REGCACHE_RBTREE, - .volatile_reg = cap1106_volatile_reg, -}; - -static irqreturn_t cap1106_thread_func(int irq_num, void *data) -{ - struct cap1106_priv *priv = data; - unsigned int status; - int ret, i; - - /* - * Deassert interrupt. This needs to be done before reading the status - * registers, which will not carry valid values otherwise. - */ - ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0); - if (ret < 0) - goto out; - - ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status); - if (ret < 0) - goto out; - - for (i = 0; i < CAP1106_NUM_CHN; i++) - input_report_key(priv->idev, priv->keycodes[i], - status & (1 << i)); - - input_sync(priv->idev); - -out: - return IRQ_HANDLED; -} - -static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep) -{ - return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, - CAP1106_REG_MAIN_CONTROL_DLSEEP, - sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0); -} - -static int cap1106_input_open(struct input_dev *idev) -{ - struct cap1106_priv *priv = input_get_drvdata(idev); - - return cap1106_set_sleep(priv, false); -} - -static void cap1106_input_close(struct input_dev *idev) -{ - struct cap1106_priv *priv = input_get_drvdata(idev); - - cap1106_set_sleep(priv, true); -} - -static int cap1106_i2c_probe(struct i2c_client *i2c_client, - const struct i2c_device_id *id) -{ - struct device *dev = &i2c_client->dev; - struct cap1106_priv *priv; - struct device_node *node; - int i, error, irq, gain = 0; - unsigned int val, rev; - u32 gain32, keycodes[CAP1106_NUM_CHN]; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - - error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val); - if (error) - return error; - - if (val != CAP1106_PRODUCT_ID) { - dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", - val, CAP1106_PRODUCT_ID); - return -ENODEV; - } - - error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val); - if (error) - return error; - - if (val != CAP1106_MANUFACTURER_ID) { - dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", - val, CAP1106_MANUFACTURER_ID); - return -ENODEV; - } - - error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev); - if (error < 0) - return error; - - dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev); - i2c_set_clientdata(i2c_client, priv); - node = dev->of_node; - - if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { - if (is_power_of_2(gain32) && gain32 <= 8) - gain = ilog2(gain32); - else - dev_err(dev, "Invalid sensor-gain value %d\n", gain32); - } - - BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); - - /* Provide some useful defaults */ - for (i = 0; i < ARRAY_SIZE(keycodes); i++) - keycodes[i] = KEY_A + i; - - of_property_read_u32_array(node, "linux,keycodes", - keycodes, ARRAY_SIZE(keycodes)); - - for (i = 0; i < ARRAY_SIZE(keycodes); i++) - priv->keycodes[i] = keycodes[i]; - - error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, - CAP1106_REG_MAIN_CONTROL_GAIN_MASK, - gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT); - if (error) - return error; - - /* Disable autorepeat. The Linux input system has its own handling. */ - error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0); - if (error) - return error; - - priv->idev = devm_input_allocate_device(dev); - if (!priv->idev) - return -ENOMEM; - - priv->idev->name = "CAP1106 capacitive touch sensor"; - priv->idev->id.bustype = BUS_I2C; - priv->idev->evbit[0] = BIT_MASK(EV_KEY); - - if (of_property_read_bool(node, "autorepeat")) - __set_bit(EV_REP, priv->idev->evbit); - - for (i = 0; i < CAP1106_NUM_CHN; i++) - __set_bit(priv->keycodes[i], priv->idev->keybit); - - __clear_bit(KEY_RESERVED, priv->idev->keybit); - - priv->idev->keycode = priv->keycodes; - priv->idev->keycodesize = sizeof(priv->keycodes[0]); - priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes); - - priv->idev->id.vendor = CAP1106_MANUFACTURER_ID; - priv->idev->id.product = CAP1106_PRODUCT_ID; - priv->idev->id.version = rev; - - priv->idev->open = cap1106_input_open; - priv->idev->close = cap1106_input_close; - - input_set_drvdata(priv->idev, priv); - - /* - * Put the device in deep sleep mode for now. - * ->open() will bring it back once the it is actually needed. - */ - cap1106_set_sleep(priv, true); - - error = input_register_device(priv->idev); - if (error) - return error; - - irq = irq_of_parse_and_map(node, 0); - if (!irq) { - dev_err(dev, "Unable to parse or map IRQ\n"); - return -ENXIO; - } - - error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func, - IRQF_ONESHOT, dev_name(dev), priv); - if (error) - return error; - - return 0; -} - -static const struct of_device_id cap1106_dt_ids[] = { - { .compatible = "microchip,cap1106", }, - {} -}; -MODULE_DEVICE_TABLE(of, cap1106_dt_ids); - -static const struct i2c_device_id cap1106_i2c_ids[] = { - { "cap1106", 0 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids); - -static struct i2c_driver cap1106_i2c_driver = { - .driver = { - .name = "cap1106", - .owner = THIS_MODULE, - .of_match_table = cap1106_dt_ids, - }, - .id_table = cap1106_i2c_ids, - .probe = cap1106_i2c_probe, -}; - -module_i2c_driver(cap1106_i2c_driver); - -MODULE_ALIAS("platform:cap1106"); -MODULE_DESCRIPTION("Microchip CAP1106 driver"); -MODULE_AUTHOR("Daniel Mack <linux@zonque.org>"); -MODULE_LICENSE("GPL v2"); |
