diff options
Diffstat (limited to 'drivers/input/keyboard/atkbd.c')
| -rw-r--r-- | drivers/input/keyboard/atkbd.c | 96 |
1 files changed, 55 insertions, 41 deletions
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 4709e15af607..a6512372c7a3 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -574,11 +574,22 @@ static void atkbd_event_work(struct work_struct *work) mutex_lock(&atkbd->event_mutex); - if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) - atkbd_set_leds(atkbd); + if (!atkbd->enabled) { + /* + * Serio ports are resumed asynchronously so while driver core + * thinks that device is already fully operational in reality + * it may not be ready yet. In this case we need to keep + * rescheduling till reconnect completes. + */ + schedule_delayed_work(&atkbd->event_work, + msecs_to_jiffies(100)); + } else { + if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) + atkbd_set_leds(atkbd); - if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) - atkbd_set_repeat_rate(atkbd); + if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) + atkbd_set_repeat_rate(atkbd); + } mutex_unlock(&atkbd->event_mutex); } @@ -770,6 +781,30 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra return 3; } +static int atkbd_reset_state(struct atkbd *atkbd) +{ + struct ps2dev *ps2dev = &atkbd->ps2dev; + unsigned char param[1]; + +/* + * Set the LEDs to a predefined state (all off). + */ + + param[0] = 0; + if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) + return -1; + +/* + * Set autorepeat to fastest possible. + */ + + param[0] = 0; + if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) + return -1; + + return 0; +} + static int atkbd_activate(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; @@ -852,29 +887,6 @@ static unsigned int atkbd_hp_forced_release_keys[] = { }; /* - * Inventec system with broken key release on volume keys - */ -static unsigned int atkbd_inventec_forced_release_keys[] = { - 0xae, 0xb0, -1U -}; - -/* - * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release - * for its volume buttons - */ -static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { - 0xae, 0xb0, -1U -}; - -/* - * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate - * release for their volume buttons - */ -static unsigned int atkbd_hp_r4000_forced_release_keys[] = { - 0xae, 0xb0, -1U -}; - -/* * Samsung NC10,NC20 with Fn+F? key release not working */ static unsigned int atkbd_samsung_forced_release_keys[] = { @@ -882,14 +894,6 @@ static unsigned int atkbd_samsung_forced_release_keys[] = { }; /* - * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop - * do not generate release events so we have to do it ourselves. - */ -static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { - 0xb0, 0xae, -1U -}; - -/* * Amilo Pi 3525 key release for Fn+Volume keys not working */ static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { @@ -911,6 +915,14 @@ static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { }; /* + * Many notebooks don't send key release event for volume up/down + * keys, with key list below common among them + */ +static unsigned int atkbd_volume_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1087,6 +1099,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) } atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); + atkbd_reset_state(atkbd); atkbd_activate(atkbd); } else { @@ -1267,6 +1280,7 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); + atkbd_reset_state(atkbd); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); @@ -1548,7 +1562,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), }, .callback = atkbd_setup_forced_release, - .driver_data = atkbd_hp_zv6100_forced_release_keys, + .driver_data = atkbd_volume_forced_release_keys, }, { .ident = "HP Presario R4000", @@ -1557,7 +1571,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), }, .callback = atkbd_setup_forced_release, - .driver_data = atkbd_hp_r4000_forced_release_keys, + .driver_data = atkbd_volume_forced_release_keys, }, { .ident = "HP Presario R4100", @@ -1566,7 +1580,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), }, .callback = atkbd_setup_forced_release, - .driver_data = atkbd_hp_r4000_forced_release_keys, + .driver_data = atkbd_volume_forced_release_keys, }, { .ident = "HP Presario R4200", @@ -1575,7 +1589,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), }, .callback = atkbd_setup_forced_release, - .driver_data = atkbd_hp_r4000_forced_release_keys, + .driver_data = atkbd_volume_forced_release_keys, }, { .ident = "Inventec Symphony", @@ -1584,7 +1598,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), }, .callback = atkbd_setup_forced_release, - .driver_data = atkbd_inventec_forced_release_keys, + .driver_data = atkbd_volume_forced_release_keys, }, { .ident = "Samsung NC10", @@ -1620,7 +1634,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), }, .callback = atkbd_setup_forced_release, - .driver_data = atkbd_amilo_pa1510_forced_release_keys, + .driver_data = atkbd_volume_forced_release_keys, }, { .ident = "Fujitsu Amilo Pi 3525", |
