diff options
Diffstat (limited to 'drivers/input/keyboard/Kconfig')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 294 |
1 files changed, 151 insertions, 143 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9d8f796c6745..a6b989a9dc07 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,50 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. + module will be called ep93xx_keypad. -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA - help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called amikbd. + module will be called gpio_keys. -config ATARI_KBD_CORE - bool - -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Enable support for GPIO driven matrix keypad. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -261,20 +231,39 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO help - Say Y here if you want to use the OMAP keypad. + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. @@ -288,51 +277,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -344,13 +320,45 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. -config KEYBOARD_EP93XX - tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) help - Say Y here to enable the matrix keypad on the Cirrus EP93XX. + Say Y here if you want to use the OMAP keypad. To compile this driver as a module, choose M here: the - module will be called ep93xx_keypad. + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. endif |
