diff options
Diffstat (limited to 'drivers/infiniband')
22 files changed, 33 insertions, 33 deletions
diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c index 62af74295dbe..24f9e3a90e8e 100644 --- a/drivers/infiniband/hw/amso1100/c2_ae.c +++ b/drivers/infiniband/hw/amso1100/c2_ae.c @@ -157,7 +157,7 @@ void c2_ae_event(struct c2_dev *c2dev, u32 mq_index) int status; /* - * retreive the message + * retrieve the message */ wr = c2_mq_consume(mq); if (!wr) diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c index d8f4bb8bf42e..0d7b6f23caff 100644 --- a/drivers/infiniband/hw/amso1100/c2_qp.c +++ b/drivers/infiniband/hw/amso1100/c2_qp.c @@ -612,7 +612,7 @@ void c2_free_qp(struct c2_dev *c2dev, struct c2_qp *qp) c2_unlock_cqs(send_cq, recv_cq); /* - * Destory qp in the rnic... + * Destroy qp in the rnic... */ destroy_qp(c2dev, qp); diff --git a/drivers/infiniband/hw/amso1100/c2_wr.h b/drivers/infiniband/hw/amso1100/c2_wr.h index c65fbdd6e469..8d4b4ca463ca 100644 --- a/drivers/infiniband/hw/amso1100/c2_wr.h +++ b/drivers/infiniband/hw/amso1100/c2_wr.h @@ -131,7 +131,7 @@ enum c2wr_ids { * All the preceding IDs are fixed, and must not change. * You can add new IDs, but must not remove or reorder * any IDs. If you do, YOU will ruin any hope of - * compatability between versions. + * compatibility between versions. */ CCWR_LAST, @@ -242,7 +242,7 @@ enum c2_acf { /* * to fix bug 1815 we define the max size allowable of the * terminate message (per the IETF spec).Refer to the IETF - * protocal specification, section 12.1.6, page 64) + * protocol specification, section 12.1.6, page 64) * The message is prefixed by 20 types of DDP info. * * Then the message has 6 bytes for the terminate control diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 47db4bf34628..58c0e417bc30 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -2392,7 +2392,7 @@ void ipath_shutdown_device(struct ipath_devdata *dd) /* * clear SerdesEnable and turn the leds off; do this here because * we are unloading, so don't count on interrupts to move along - * Turn the LEDs off explictly for the same reason. + * Turn the LEDs off explicitly for the same reason. */ dd->ipath_f_quiet_serdes(dd); diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 6d4b29c4cd89..ee79a2d97b14 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -1972,7 +1972,7 @@ static int ipath_do_user_init(struct file *fp, * 0 to 1. So for those chips, we turn it off and then back on. * This will (very briefly) affect any other open ports, but the * duration is very short, and therefore isn't an issue. We - * explictly set the in-memory tail copy to 0 beforehand, so we + * explicitly set the in-memory tail copy to 0 beforehand, so we * don't have to wait to be sure the DMA update has happened * (chip resets head/tail to 0 on transition to enable). */ diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index fef0f4201257..7c1eebe8c7c9 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -335,7 +335,7 @@ done: * @dd: the infinipath device * * sanity check at least some of the values after reset, and - * ensure no receive or transmit (explictly, in case reset + * ensure no receive or transmit (explicitly, in case reset * failed */ static int init_chip_reset(struct ipath_devdata *dd) diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c index 7420715256a9..e8a2a915251e 100644 --- a/drivers/infiniband/hw/ipath/ipath_ud.c +++ b/drivers/infiniband/hw/ipath/ipath_ud.c @@ -86,7 +86,7 @@ static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe) } /* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ length = swqe->length; @@ -515,7 +515,7 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, } /* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ wc.byte_len = tlen + sizeof(struct ib_grh); diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c index be78f6643c06..f5cb13b21445 100644 --- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c @@ -236,7 +236,7 @@ static int ipath_user_sdma_num_pages(const struct iovec *iov) return 1 + ((epage - spage) >> PAGE_SHIFT); } -/* truncate length to page boundry */ +/* truncate length to page boundary */ static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len) { const unsigned long offset = addr & ~PAGE_MASK; diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index cfa3a2b22232..33c7eedaba6c 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1397,7 +1397,7 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node) cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSING; send_ack(cm_node, NULL); - /* Wait for ACK as this is simultanous close.. + /* Wait for ACK as this is simultaneous close.. * After we receive ACK, do not send anything.. * Just rm the node.. Done.. */ break; diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 08c194861af5..10d0a5ec9add 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -80,7 +80,7 @@ static void nes_terminate_start_timer(struct nes_qp *nesqp); #ifdef CONFIG_INFINIBAND_NES_DEBUG static unsigned char *nes_iwarp_state_str[] = { - "Non-Existant", + "Non-Existent", "Idle", "RTS", "Closing", @@ -91,7 +91,7 @@ static unsigned char *nes_iwarp_state_str[] = { }; static unsigned char *nes_tcp_state_str[] = { - "Non-Existant", + "Non-Existent", "Closed", "Listen", "SYN Sent", diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 2c9c1933bbe3..e96b8fb5d44c 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -902,7 +902,7 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev) nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active); } - nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscous = %d, All Multicast = %d.\n", + nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscuous = %d, All Multicast = %d.\n", mc_count, !!(netdev->flags & IFF_PROMISC), !!(netdev->flags & IFF_ALLMULTI)); if (!mc_all_on) { diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index 73225eee3cc6..769a1d9da4b7 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -653,7 +653,7 @@ struct diag_observer_list_elt; /* device data struct now contains only "general per-device" info. * fields related to a physical IB port are in a qib_pportdata struct, - * described above) while fields only used by a particualr chip-type are in + * described above) while fields only used by a particular chip-type are in * a qib_chipdata struct, whose contents are opaque to this file. */ struct qib_devdata { diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index 75bfad16c114..406fca50d036 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -1539,7 +1539,7 @@ done_chk_sdma: /* * If process has NOT already set it's affinity, select and - * reserve a processor for it, as a rendevous for all + * reserve a processor for it, as a rendezvous for all * users of the driver. If they don't actually later * set affinity to this cpu, or set it to some other cpu, * it just means that sooner or later we don't recommend @@ -1657,7 +1657,7 @@ static int qib_do_user_init(struct file *fp, * 0 to 1. So for those chips, we turn it off and then back on. * This will (very briefly) affect any other open ctxts, but the * duration is very short, and therefore isn't an issue. We - * explictly set the in-memory tail copy to 0 beforehand, so we + * explicitly set the in-memory tail copy to 0 beforehand, so we * don't have to wait to be sure the DMA update has happened * (chip resets head/tail to 0 on transition to enable). */ diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 774dea897e9c..7de4b7ebffc5 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ @@ -2171,7 +2171,7 @@ static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index de799f17cb9e..74fe0360bec7 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ @@ -2479,7 +2479,7 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) * we command the link down. As with width, only write the * actual register if the link is currently down, otherwise * takes effect on next link change. Since setting is being - * explictly requested (via MAD or sysfs), clear autoneg + * explicitly requested (via MAD or sysfs), clear autoneg * failure status if speed autoneg is enabled. */ ppd->link_speed_enabled = val; @@ -2778,7 +2778,7 @@ static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 4a2d21e15a70..55de3cf3441c 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isnt' set. + * isn't' set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); dd->flags |= QIB_DOING_RESET; @@ -3727,7 +3727,7 @@ static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) /* * As with width, only write the actual register if the * link is currently down, otherwise takes effect on next - * link change. Since setting is being explictly requested + * link change. Since setting is being explicitly requested * (via MAD or sysfs), clear autoneg failure status if speed * autoneg is enabled. */ @@ -4163,7 +4163,7 @@ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't - * know, we have to do it explictly. + * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); @@ -7483,7 +7483,7 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ /* Data Rate Select [5:7-6] (leave as default) */ - /* RX Parralel Word Width [3:10-8] (leave as default) */ + /* RX Parallel Word Width [3:10-8] (leave as default) */ /* RX REST */ /* Single- or Multi-channel reset */ diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c index ffefb78b8949..a01f3fce8eb3 100644 --- a/drivers/infiniband/hw/qib/qib_init.c +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -346,7 +346,7 @@ done: * @dd: the qlogic_ib device * * sanity check at least some of the values after reset, and - * ensure no receive or transmit (explictly, in case reset + * ensure no receive or transmit (explicitly, in case reset * failed */ static int init_after_reset(struct qib_devdata *dd) diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h index 147aff9117d7..7840ab593bcf 100644 --- a/drivers/infiniband/hw/qib/qib_mad.h +++ b/drivers/infiniband/hw/qib/qib_mad.h @@ -73,7 +73,7 @@ struct ib_mad_notice_attr { struct { __be16 reserved; - __be16 lid; /* LID where change occured */ + __be16 lid; /* LID where change occurred */ u8 reserved2; u8 local_changes; /* low bit - local changes */ __be32 new_cap_mask; /* new capability mask */ diff --git a/drivers/infiniband/hw/qib/qib_twsi.c b/drivers/infiniband/hw/qib/qib_twsi.c index 6f31ca5039db..ddde72e11edb 100644 --- a/drivers/infiniband/hw/qib/qib_twsi.c +++ b/drivers/infiniband/hw/qib/qib_twsi.c @@ -41,7 +41,7 @@ * QLogic_IB "Two Wire Serial Interface" driver. * Originally written for a not-quite-i2c serial eeprom, which is * still used on some supported boards. Later boards have added a - * variety of other uses, most board-specific, so teh bit-boffing + * variety of other uses, most board-specific, so the bit-boffing * part has been split off to this file, while the other parts * have been moved to chip-specific files. * diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c index 4a51fd1e9cb7..828609fa4d28 100644 --- a/drivers/infiniband/hw/qib/qib_ud.c +++ b/drivers/infiniband/hw/qib/qib_ud.c @@ -116,7 +116,7 @@ static void qib_ud_loopback(struct qib_qp *sqp, struct qib_swqe *swqe) } /* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ length = swqe->length; @@ -520,7 +520,7 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr, goto drop; /* - * A GRH is expected to preceed the data even if not + * A GRH is expected to precede the data even if not * present on the wire. */ wc.byte_len = tlen + sizeof(struct ib_grh); diff --git a/drivers/infiniband/hw/qib/qib_user_sdma.c b/drivers/infiniband/hw/qib/qib_user_sdma.c index 66208bcd7c13..82442085cbe6 100644 --- a/drivers/infiniband/hw/qib/qib_user_sdma.c +++ b/drivers/infiniband/hw/qib/qib_user_sdma.c @@ -239,7 +239,7 @@ static int qib_user_sdma_num_pages(const struct iovec *iov) } /* - * Truncate length to page boundry. + * Truncate length to page boundary. */ static int qib_user_sdma_page_length(unsigned long addr, unsigned long len) { diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index f1df01567bb6..2f02ab0ccc1e 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -91,7 +91,7 @@ #define SIZE_4K (1UL << SHIFT_4K) #define MASK_4K (~(SIZE_4K-1)) - /* support upto 512KB in one RDMA */ + /* support up to 512KB in one RDMA */ #define ISCSI_ISER_SG_TABLESIZE (0x80000 >> SHIFT_4K) #define ISER_DEF_CMD_PER_LUN 128 |
