diff options
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_iba6120.c')
| -rw-r--r-- | drivers/infiniband/hw/ipath/ipath_iba6120.c | 439 |
1 files changed, 350 insertions, 89 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 0103d6f4847b..c7a2f50824c0 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -145,10 +145,57 @@ struct _infinipath_do_not_use_kernel_regs { unsigned long long Reserved12; }; -#define IPATH_KREG_OFFSET(field) (offsetof(struct \ - _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) +struct _infinipath_do_not_use_counters { + __u64 LBIntCnt; + __u64 LBFlowStallCnt; + __u64 Reserved1; + __u64 TxUnsupVLErrCnt; + __u64 TxDataPktCnt; + __u64 TxFlowPktCnt; + __u64 TxDwordCnt; + __u64 TxLenErrCnt; + __u64 TxMaxMinLenErrCnt; + __u64 TxUnderrunCnt; + __u64 TxFlowStallCnt; + __u64 TxDroppedPktCnt; + __u64 RxDroppedPktCnt; + __u64 RxDataPktCnt; + __u64 RxFlowPktCnt; + __u64 RxDwordCnt; + __u64 RxLenErrCnt; + __u64 RxMaxMinLenErrCnt; + __u64 RxICRCErrCnt; + __u64 RxVCRCErrCnt; + __u64 RxFlowCtrlErrCnt; + __u64 RxBadFormatCnt; + __u64 RxLinkProblemCnt; + __u64 RxEBPCnt; + __u64 RxLPCRCErrCnt; + __u64 RxBufOvflCnt; + __u64 RxTIDFullErrCnt; + __u64 RxTIDValidErrCnt; + __u64 RxPKeyMismatchCnt; + __u64 RxP0HdrEgrOvflCnt; + __u64 RxP1HdrEgrOvflCnt; + __u64 RxP2HdrEgrOvflCnt; + __u64 RxP3HdrEgrOvflCnt; + __u64 RxP4HdrEgrOvflCnt; + __u64 RxP5HdrEgrOvflCnt; + __u64 RxP6HdrEgrOvflCnt; + __u64 RxP7HdrEgrOvflCnt; + __u64 RxP8HdrEgrOvflCnt; + __u64 Reserved6; + __u64 Reserved7; + __u64 IBStatusChangeCnt; + __u64 IBLinkErrRecoveryCnt; + __u64 IBLinkDownedCnt; + __u64 IBSymbolErrCnt; +}; + +#define IPATH_KREG_OFFSET(field) (offsetof( \ + struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) #define IPATH_CREG_OFFSET(field) (offsetof( \ - struct infinipath_counters, field) / sizeof(u64)) + struct _infinipath_do_not_use_counters, field) / sizeof(u64)) static const struct ipath_kregs ipath_pe_kregs = { .kr_control = IPATH_KREG_OFFSET(Control), @@ -282,6 +329,9 @@ static const struct ipath_cregs ipath_pe_cregs = { #define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL #define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL +#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf +#define IBA6120_IBCS_LINKSTATE_SHIFT 4 + /* kr_extstatus bits */ #define INFINIPATH_EXTS_FREQSEL 0x2 #define INFINIPATH_EXTS_SERDESSEL 0x4 @@ -296,6 +346,9 @@ static const struct ipath_cregs ipath_pe_cregs = { #define IPATH_GPIO_SCL (1ULL << \ (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) +#define INFINIPATH_R_INTRAVAIL_SHIFT 16 +#define INFINIPATH_R_TAILUPD_SHIFT 31 + /* 6120 specific hardware errors... */ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = { INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"), @@ -320,10 +373,28 @@ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = { INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) -static int ipath_pe_txe_recover(struct ipath_devdata *); static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *, u32, unsigned long); +/* + * On platforms using this chip, and not having ordered WC stores, we + * can get TXE parity errors due to speculative reads to the PIO buffers, + * and this, due to a chip bug can result in (many) false parity error + * reports. So it's a debug print on those, and an info print on systems + * where the speculative reads don't occur. + */ +static void ipath_pe_txe_recover(struct ipath_devdata *dd) +{ + if (ipath_unordered_wc()) + ipath_dbg("Recovering from TXE PIO parity error\n"); + else { + ++ipath_stats.sps_txeparity; + dev_info(&dd->pcidev->dev, + "Recovering from TXE PIO parity error\n"); + } +} + + /** * ipath_pe_handle_hwerrors - display hardware errors. * @dd: the infinipath device @@ -403,35 +474,11 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, * occur if a processor speculative read is done to the PIO * buffer while we are sending a packet, for example. */ - if ((hwerrs & TXE_PIO_PARITY) && ipath_pe_txe_recover(dd)) + if (hwerrs & TXE_PIO_PARITY) { + ipath_pe_txe_recover(dd); hwerrs &= ~TXE_PIO_PARITY; - if (hwerrs) { - /* - * if any set that we aren't ignoring only make the - * complaint once, in case it's stuck or recurring, - * and we get here multiple times - * Force link down, so switch knows, and - * LEDs are turned off - */ - if (dd->ipath_flags & IPATH_INITTED) { - ipath_set_linkstate(dd, IPATH_IB_LINKDOWN); - ipath_setup_pe_setextled(dd, - INFINIPATH_IBCS_L_STATE_DOWN, - INFINIPATH_IBCS_LT_STATE_DISABLED); - ipath_dev_err(dd, "Fatal Hardware Error (freeze " - "mode), no longer usable, SN %.16s\n", - dd->ipath_serial); - isfatal = 1; - } - /* - * Mark as having had an error for driver, and also - * for /sys and status word mapped to user programs. - * This marks unit as not usable, until reset - */ - *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY; - *dd->ipath_statusp |= IPATH_STATUS_HWERROR; - dd->ipath_flags &= ~IPATH_INITTED; - } else { + } + if (!hwerrs) { static u32 freeze_cnt; freeze_cnt++; @@ -485,7 +532,7 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) { /* - * If it occurs, it is left masked since the eternal + * If it occurs, it is left masked since the external * interface is unused */ dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED; @@ -563,6 +610,14 @@ static int ipath_pe_boardname(struct ipath_devdata *dd, char *name, dd->ipath_f_put_tid = ipath_pe_put_tid_2; } + + /* + * set here, not in ipath_init_*_funcs because we have to do + * it after we can read chip registers. + */ + dd->ipath_ureg_align = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign); + return ret; } @@ -667,17 +722,8 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd) val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); prev_val = val; - if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) & - INFINIPATH_XGXS_MDIOADDR_MASK) != 3) { - val &= - ~(INFINIPATH_XGXS_MDIOADDR_MASK << - INFINIPATH_XGXS_MDIOADDR_SHIFT); - /* MDIO address 3 */ - val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT; - } - if (val & INFINIPATH_XGXS_RESET) { + if (val & INFINIPATH_XGXS_RESET) val &= ~INFINIPATH_XGXS_RESET; - } if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) & INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) { /* need to compensate for Tx inversion in partner */ @@ -707,21 +753,6 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd) (unsigned long long) ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); - if (!ipath_waitfor_mdio_cmdready(dd)) { - ipath_write_kreg( - dd, dd->ipath_kregs->kr_mdio, - ipath_mdio_req(IPATH_MDIO_CMD_READ, 31, - IPATH_MDIO_CTRL_XGXS_REG_8, 0)); - if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio, - IPATH_MDIO_DATAVALID, &val)) - ipath_dbg("Never got MDIO data for XGXS " - "status read\n"); - else - ipath_cdbg(VERBOSE, "MDIO Read reg8, " - "'bank' 31 %x\n", (u32) val); - } else - ipath_dbg("Never got MDIO cmdready for XGXS status read\n"); - return ret; } @@ -902,12 +933,27 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd, else ipath_dev_err(dd, "Can't find PCI Express " "capability!\n"); + + dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; + dd->ipath_link_speed_supported = IPATH_IB_SDR; + dd->ipath_link_width_enabled = IB_WIDTH_4X; + dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported; + /* these can't change for this chip, so set once */ + dd->ipath_link_width_active = dd->ipath_link_width_enabled; + dd->ipath_link_speed_active = dd->ipath_link_speed_enabled; return 0; } static void ipath_init_pe_variables(struct ipath_devdata *dd) { /* + * setup the register offsets, since they are different for each + * chip + */ + dd->ipath_kregs = &ipath_pe_kregs; + dd->ipath_cregs = &ipath_pe_cregs; + + /* * bits for selecting i2c direction and values, * used for I2C serial flash */ @@ -916,6 +962,43 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) dd->ipath_gpio_sda = IPATH_GPIO_SDA; dd->ipath_gpio_scl = IPATH_GPIO_SCL; + /* + * Fill in data for field-values that change in newer chips. + * We dynamically specify only the mask for LINKTRAININGSTATE + * and only the shift for LINKSTATE, as they are the only ones + * that change. Also precalculate the 3 link states of interest + * and the combined mask. + */ + dd->ibcs_ls_shift = IBA6120_IBCS_LINKSTATE_SHIFT; + dd->ibcs_lts_mask = IBA6120_IBCS_LINKTRAININGSTATE_MASK; + dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK << + dd->ibcs_ls_shift) | dd->ibcs_lts_mask; + dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift); + dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift); + dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift); + + /* + * Fill in data for ibcc field-values that change in newer chips. + * We dynamically specify only the mask for LINKINITCMD + * and only the shift for LINKCMD and MAXPKTLEN, as they are + * the only ones that change. + */ + dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK; + dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT; + dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT; + + /* Fill in shifts for RcvCtrl. */ + dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; + dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT; + dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT; + dd->ipath_r_portcfg_shift = 0; /* Not on IBA6120 */ + /* variables for sanity checking interrupt and errors */ dd->ipath_hwe_bitsextant = (INFINIPATH_HWE_RXEMEMPARITYERR_MASK << @@ -963,6 +1046,8 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK; dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK; + dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT; + dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT; /* * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity. @@ -984,6 +1069,7 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET; + dd->delay_mult = 2; /* SDR, 4X, can't change */ } /* setup the MSI stuff again after a reset. I'd like to just call @@ -1289,6 +1375,9 @@ static int ipath_pe_early_init(struct ipath_devdata *dd) */ dd->ipath_rcvhdrentsize = 24; dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE; + dd->ipath_rhf_offset = 0; + dd->ipath_egrtidbase = (u64 __iomem *) + ((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase); /* * To truly support a 4KB MTU (for usermode), we need to @@ -1359,34 +1448,204 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd) dd->ipath_irq = 0; } + +static struct ipath_message_header * +ipath_pe_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr) +{ + return (struct ipath_message_header *) + &rhf_addr[sizeof(u64) / sizeof(u32)]; +} + +static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports) +{ + dd->ipath_portcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); + dd->ipath_p0_rcvegrcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt); +} + +static void ipath_pe_read_counters(struct ipath_devdata *dd, + struct infinipath_counters *cntrs) +{ + cntrs->LBIntCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt)); + cntrs->LBFlowStallCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt)); + cntrs->TxSDmaDescCnt = 0; + cntrs->TxUnsupVLErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt)); + cntrs->TxDataPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt)); + cntrs->TxFlowPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt)); + cntrs->TxDwordCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt)); + cntrs->TxLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt)); + cntrs->TxMaxMinLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt)); + cntrs->TxUnderrunCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt)); + cntrs->TxFlowStallCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt)); + cntrs->TxDroppedPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt)); + cntrs->RxDroppedPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt)); + cntrs->RxDataPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt)); + cntrs->RxFlowPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt)); + cntrs->RxDwordCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt)); + cntrs->RxLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt)); + cntrs->RxMaxMinLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt)); + cntrs->RxICRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt)); + cntrs->RxVCRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt)); + cntrs->RxFlowCtrlErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt)); + cntrs->RxBadFormatCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt)); + cntrs->RxLinkProblemCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt)); + cntrs->RxEBPCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt)); + cntrs->RxLPCRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt)); + cntrs->RxBufOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt)); + cntrs->RxTIDFullErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt)); + cntrs->RxTIDValidErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt)); + cntrs->RxPKeyMismatchCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt)); + cntrs->RxP0HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt)); + cntrs->RxP1HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt)); + cntrs->RxP2HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt)); + cntrs->RxP3HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt)); + cntrs->RxP4HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt)); + cntrs->RxP5HdrEgrOvflCnt = 0; + cntrs->RxP6HdrEgrOvflCnt = 0; + cntrs->RxP7HdrEgrOvflCnt = 0; + cntrs->RxP8HdrEgrOvflCnt = 0; + cntrs->RxP9HdrEgrOvflCnt = 0; + cntrs->RxP10HdrEgrOvflCnt = 0; + cntrs->RxP11HdrEgrOvflCnt = 0; + cntrs->RxP12HdrEgrOvflCnt = 0; + cntrs->RxP13HdrEgrOvflCnt = 0; + cntrs->RxP14HdrEgrOvflCnt = 0; + cntrs->RxP15HdrEgrOvflCnt = 0; + cntrs->RxP16HdrEgrOvflCnt = 0; + cntrs->IBStatusChangeCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt)); + cntrs->IBLinkErrRecoveryCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt)); + cntrs->IBLinkDownedCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt)); + cntrs->IBSymbolErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt)); + cntrs->RxVL15DroppedPktCnt = 0; + cntrs->RxOtherLocalPhyErrCnt = 0; + cntrs->PcieRetryBufDiagQwordCnt = 0; + cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs; + cntrs->LocalLinkIntegrityErrCnt = dd->ipath_lli_errs; + cntrs->RxVlErrCnt = 0; + cntrs->RxDlidFltrCnt = 0; +} + + +/* no interrupt fallback for these chips */ +static int ipath_pe_nointr_fallback(struct ipath_devdata *dd) +{ + return 0; +} + + /* - * On platforms using this chip, and not having ordered WC stores, we - * can get TXE parity errors due to speculative reads to the PIO buffers, - * and this, due to a chip bug can result in (many) false parity error - * reports. So it's a debug print on those, and an info print on systems - * where the speculative reads don't occur. - * Because we can get lots of false errors, we have no upper limit - * on recovery attempts on those platforms. + * reset the XGXS (between serdes and IBC). Slightly less intrusive + * than resetting the IBC or external link state, and useful in some + * cases to cause some retraining. To do this right, we reset IBC + * as well. */ -static int ipath_pe_txe_recover(struct ipath_devdata *dd) +static void ipath_pe_xgxs_reset(struct ipath_devdata *dd) { - if (ipath_unordered_wc()) - ipath_dbg("Recovering from TXE PIO parity error\n"); - else { - int cnt = ++ipath_stats.sps_txeparity; - if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) { - if (cnt == IPATH_MAX_PARITY_ATTEMPTS) - ipath_dev_err(dd, - "Too many attempts to recover from " - "TXE parity, giving up\n"); - return 0; - } - dev_info(&dd->pcidev->dev, - "Recovering from TXE PIO parity error\n"); + u64 val, prev_val; + + prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); + val = prev_val | INFINIPATH_XGXS_RESET; + prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control & ~INFINIPATH_C_LINKENABLE); + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); + ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val); + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control); +} + + +static int ipath_pe_get_ib_cfg(struct ipath_devdata *dd, int which) +{ + int ret; + + switch (which) { + case IPATH_IB_CFG_LWID: + ret = dd->ipath_link_width_active; + break; + case IPATH_IB_CFG_SPD: + ret = dd->ipath_link_speed_active; + break; + case IPATH_IB_CFG_LWID_ENB: + ret = dd->ipath_link_width_enabled; + break; + case IPATH_IB_CFG_SPD_ENB: + ret = dd->ipath_link_speed_enabled; + break; + default: + ret = -ENOTSUPP; + break; } - return 1; + return ret; +} + + +/* we assume range checking is already done, if needed */ +static int ipath_pe_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val) +{ + int ret = 0; + + if (which == IPATH_IB_CFG_LWID_ENB) + dd->ipath_link_width_enabled = val; + else if (which == IPATH_IB_CFG_SPD_ENB) + dd->ipath_link_speed_enabled = val; + else + ret = -ENOTSUPP; + return ret; } +static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b) +{ +} + + +static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs) +{ + ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs), + ipath_ib_linktrstate(dd, ibcs)); + return 0; +} + + /** * ipath_init_iba6120_funcs - set up the chip-specific function pointers * @dd: the infinipath device @@ -1407,7 +1666,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes; dd->ipath_f_clear_tids = ipath_pe_clear_tids; /* - * this may get changed after we read the chip revision, + * _f_put_tid may get changed after we read the chip revision, * but we start with the safe version for all revs */ dd->ipath_f_put_tid = ipath_pe_put_tid; @@ -1415,17 +1674,19 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) dd->ipath_f_setextled = ipath_setup_pe_setextled; dd->ipath_f_get_base_info = ipath_pe_get_base_info; dd->ipath_f_free_irq = ipath_pe_free_irq; - - /* initialize chip-specific variables */ dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; + dd->ipath_f_intr_fallback = ipath_pe_nointr_fallback; + dd->ipath_f_xgxs_reset = ipath_pe_xgxs_reset; + dd->ipath_f_get_msgheader = ipath_pe_get_msgheader; + dd->ipath_f_config_ports = ipath_pe_config_ports; + dd->ipath_f_read_counters = ipath_pe_read_counters; + dd->ipath_f_get_ib_cfg = ipath_pe_get_ib_cfg; + dd->ipath_f_set_ib_cfg = ipath_pe_set_ib_cfg; + dd->ipath_f_config_jint = ipath_pe_config_jint; + dd->ipath_f_ib_updown = ipath_pe_ib_updown; - /* - * setup the register offsets, since they are different for each - * chip - */ - dd->ipath_kregs = &ipath_pe_kregs; - dd->ipath_cregs = &ipath_pe_cregs; + /* initialize chip-specific variables */ ipath_init_pe_variables(dd); } |
