diff options
Diffstat (limited to 'drivers/iio')
72 files changed, 5491 insertions, 401 deletions
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 2a0735d6955d..197e693e7e7b 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -188,7 +188,6 @@ enum bmc150_accel_trigger_id { struct bmc150_accel_data { struct regmap *regmap; - struct device *dev; int irq; struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS]; atomic_t active_intr; @@ -257,6 +256,7 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data, enum bmc150_power_modes mode, int dur_us) { + struct device *dev = regmap_get_device(data->regmap); int i; int ret; u8 lpw_bits; @@ -280,11 +280,11 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data, lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT; lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT); - dev_dbg(data->dev, "Set Mode bits %x\n", lpw_bits); + dev_dbg(dev, "Set Mode bits %x\n", lpw_bits); ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_LPW, lpw_bits); if (ret < 0) { - dev_err(data->dev, "Error writing reg_pmu_lpw\n"); + dev_err(dev, "Error writing reg_pmu_lpw\n"); return ret; } @@ -317,23 +317,24 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, static int bmc150_accel_update_slope(struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); int ret; ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_6, data->slope_thres); if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_6\n"); + dev_err(dev, "Error writing reg_int_6\n"); return ret; } ret = regmap_update_bits(data->regmap, BMC150_ACCEL_REG_INT_5, BMC150_ACCEL_SLOPE_DUR_MASK, data->slope_dur); if (ret < 0) { - dev_err(data->dev, "Error updating reg_int_5\n"); + dev_err(dev, "Error updating reg_int_5\n"); return ret; } - dev_dbg(data->dev, "%s: %x %x\n", __func__, data->slope_thres, + dev_dbg(dev, "%s: %x %x\n", __func__, data->slope_thres, data->slope_dur); return ret; @@ -379,20 +380,21 @@ static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data) static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on) { + struct device *dev = regmap_get_device(data->regmap); int ret; if (on) { - ret = pm_runtime_get_sync(data->dev); + ret = pm_runtime_get_sync(dev); } else { - pm_runtime_mark_last_busy(data->dev); - ret = pm_runtime_put_autosuspend(data->dev); + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); } if (ret < 0) { - dev_err(data->dev, + dev_err(dev, "Failed: bmc150_accel_set_power_state for %d\n", on); if (on) - pm_runtime_put_noidle(data->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -446,6 +448,7 @@ static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev, static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, bool state) { + struct device *dev = regmap_get_device(data->regmap); struct bmc150_accel_interrupt *intr = &data->interrupts[i]; const struct bmc150_accel_interrupt_info *info = intr->info; int ret; @@ -475,7 +478,7 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, ret = regmap_update_bits(data->regmap, info->map_reg, info->map_bitmask, (state ? info->map_bitmask : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating reg_int_map\n"); + dev_err(dev, "Error updating reg_int_map\n"); goto out_fix_power_state; } @@ -483,7 +486,7 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i, ret = regmap_update_bits(data->regmap, info->en_reg, info->en_bitmask, (state ? info->en_bitmask : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating reg_int_en\n"); + dev_err(dev, "Error updating reg_int_en\n"); goto out_fix_power_state; } @@ -501,6 +504,7 @@ out_fix_power_state: static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) { + struct device *dev = regmap_get_device(data->regmap); int ret, i; for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table); ++i) { @@ -509,8 +513,7 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) BMC150_ACCEL_REG_PMU_RANGE, data->chip_info->scale_table[i].reg_range); if (ret < 0) { - dev_err(data->dev, - "Error writing pmu_range\n"); + dev_err(dev, "Error writing pmu_range\n"); return ret; } @@ -524,6 +527,7 @@ static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val) static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; unsigned int value; @@ -531,7 +535,7 @@ static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val) ret = regmap_read(data->regmap, BMC150_ACCEL_REG_TEMP, &value); if (ret < 0) { - dev_err(data->dev, "Error reading reg_temp\n"); + dev_err(dev, "Error reading reg_temp\n"); mutex_unlock(&data->mutex); return ret; } @@ -546,6 +550,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, struct iio_chan_spec const *chan, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; int axis = chan->scan_index; __le16 raw_val; @@ -560,7 +565,7 @@ static int bmc150_accel_get_axis(struct bmc150_accel_data *data, ret = regmap_bulk_read(data->regmap, BMC150_ACCEL_AXIS_TO_REG(axis), &raw_val, sizeof(raw_val)); if (ret < 0) { - dev_err(data->dev, "Error reading axis %d\n", axis); + dev_err(dev, "Error reading axis %d\n", axis); bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -832,6 +837,7 @@ static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val) static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, char *buffer, int samples) { + struct device *dev = regmap_get_device(data->regmap); int sample_length = 3 * 2; int ret; int total_length = samples * sample_length; @@ -855,7 +861,8 @@ static int bmc150_accel_fifo_transfer(struct bmc150_accel_data *data, } if (ret) - dev_err(data->dev, "Error transferring data from fifo in single steps of %zu\n", + dev_err(dev, + "Error transferring data from fifo in single steps of %zu\n", step); return ret; @@ -865,6 +872,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, unsigned samples, bool irq) { struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int ret, i; u8 count; u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; @@ -874,7 +882,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, ret = regmap_read(data->regmap, BMC150_ACCEL_REG_FIFO_STATUS, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_fifo_status\n"); + dev_err(dev, "Error reading reg_fifo_status\n"); return ret; } @@ -1136,6 +1144,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) { struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig); struct bmc150_accel_data *data = t->data; + struct device *dev = regmap_get_device(data->regmap); int ret; /* new data interrupts don't need ack */ @@ -1149,8 +1158,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig) BMC150_ACCEL_INT_MODE_LATCH_RESET); mutex_unlock(&data->mutex); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); return ret; } @@ -1201,13 +1209,14 @@ static const struct iio_trigger_ops bmc150_accel_trigger_ops = { static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) { struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int dir; int ret; unsigned int val; ret = regmap_read(data->regmap, BMC150_ACCEL_REG_INT_STATUS_2, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_int_status_2\n"); + dev_err(dev, "Error reading reg_int_status_2\n"); return ret; } @@ -1250,6 +1259,7 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); bool ack = false; int ret; @@ -1273,7 +1283,7 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret) - dev_err(data->dev, "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); ret = IRQ_HANDLED; } else { @@ -1344,13 +1354,14 @@ static void bmc150_accel_unregister_triggers(struct bmc150_accel_data *data, static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); int i, ret; for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { struct bmc150_accel_trigger *t = &data->triggers[i]; - t->indio_trig = devm_iio_trigger_alloc(data->dev, - bmc150_accel_triggers[i].name, + t->indio_trig = devm_iio_trigger_alloc(dev, + bmc150_accel_triggers[i].name, indio_dev->name, indio_dev->id); if (!t->indio_trig) { @@ -1358,7 +1369,7 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, break; } - t->indio_trig->dev.parent = data->dev; + t->indio_trig->dev.parent = dev; t->indio_trig->ops = &bmc150_accel_trigger_ops; t->intr = bmc150_accel_triggers[i].intr; t->data = data; @@ -1382,12 +1393,13 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1; int ret; ret = regmap_write(data->regmap, reg, data->fifo_mode); if (ret < 0) { - dev_err(data->dev, "Error writing reg_fifo_config1\n"); + dev_err(dev, "Error writing reg_fifo_config1\n"); return ret; } @@ -1397,7 +1409,7 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) ret = regmap_write(data->regmap, BMC150_ACCEL_REG_FIFO_CONFIG0, data->watermark); if (ret < 0) - dev_err(data->dev, "Error writing reg_fifo_config0\n"); + dev_err(dev, "Error writing reg_fifo_config0\n"); return ret; } @@ -1481,17 +1493,17 @@ static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = { static int bmc150_accel_chip_init(struct bmc150_accel_data *data) { + struct device *dev = regmap_get_device(data->regmap); int ret, i; unsigned int val; ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val); if (ret < 0) { - dev_err(data->dev, - "Error: Reading chip id\n"); + dev_err(dev, "Error: Reading chip id\n"); return ret; } - dev_dbg(data->dev, "Chip Id %x\n", val); + dev_dbg(dev, "Chip Id %x\n", val); for (i = 0; i < ARRAY_SIZE(bmc150_accel_chip_info_tbl); i++) { if (bmc150_accel_chip_info_tbl[i].chip_id == val) { data->chip_info = &bmc150_accel_chip_info_tbl[i]; @@ -1500,7 +1512,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) } if (!data->chip_info) { - dev_err(data->dev, "Invalid chip %x\n", val); + dev_err(dev, "Invalid chip %x\n", val); return -ENODEV; } @@ -1517,8 +1529,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) ret = regmap_write(data->regmap, BMC150_ACCEL_REG_PMU_RANGE, BMC150_ACCEL_DEF_RANGE_4G); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_pmu_range\n"); + dev_err(dev, "Error writing reg_pmu_range\n"); return ret; } @@ -1536,8 +1547,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); return ret; } @@ -1557,7 +1567,6 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, data = iio_priv(indio_dev); dev_set_drvdata(dev, indio_dev); - data->dev = dev; data->irq = irq; data->regmap = regmap; @@ -1581,13 +1590,13 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, bmc150_accel_trigger_handler, &bmc150_accel_buffer_ops); if (ret < 0) { - dev_err(data->dev, "Failed: iio triggered buffer setup\n"); + dev_err(dev, "Failed: iio triggered buffer setup\n"); return ret; } if (data->irq > 0) { ret = devm_request_threaded_irq( - data->dev, data->irq, + dev, data->irq, bmc150_accel_irq_handler, bmc150_accel_irq_thread_handler, IRQF_TRIGGER_RISING, @@ -1605,7 +1614,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, ret = regmap_write(data->regmap, BMC150_ACCEL_REG_INT_RST_LATCH, BMC150_ACCEL_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_rst_latch\n"); + dev_err(dev, "Error writing reg_int_rst_latch\n"); goto err_buffer_cleanup; } @@ -1654,9 +1663,9 @@ int bmc150_accel_core_remove(struct device *dev) iio_device_unregister(indio_dev); - pm_runtime_disable(data->dev); - pm_runtime_set_suspended(data->dev); - pm_runtime_put_noidle(data->dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1); @@ -1705,7 +1714,7 @@ static int bmc150_accel_runtime_suspend(struct device *dev) struct bmc150_accel_data *data = iio_priv(indio_dev); int ret; - dev_dbg(data->dev, __func__); + dev_dbg(dev, __func__); ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0); if (ret < 0) return -EAGAIN; @@ -1720,7 +1729,7 @@ static int bmc150_accel_runtime_resume(struct device *dev) int ret; int sleep_val; - dev_dbg(data->dev, __func__); + dev_dbg(dev, __func__); ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); if (ret < 0) diff --git a/drivers/iio/accel/mma7455_core.c b/drivers/iio/accel/mma7455_core.c index c633cc2c0789..c902f54c23f5 100644 --- a/drivers/iio/accel/mma7455_core.c +++ b/drivers/iio/accel/mma7455_core.c @@ -55,11 +55,11 @@ struct mma7455_data { struct regmap *regmap; - struct device *dev; }; static int mma7455_drdy(struct mma7455_data *mma7455) { + struct device *dev = regmap_get_device(mma7455->regmap); unsigned int reg; int tries = 3; int ret; @@ -75,7 +75,7 @@ static int mma7455_drdy(struct mma7455_data *mma7455) msleep(20); } - dev_warn(mma7455->dev, "data not ready\n"); + dev_warn(dev, "data not ready\n"); return -EIO; } @@ -260,7 +260,6 @@ int mma7455_core_probe(struct device *dev, struct regmap *regmap, dev_set_drvdata(dev, indio_dev); mma7455 = iio_priv(indio_dev); mma7455->regmap = regmap; - mma7455->dev = dev; indio_dev->info = &mma7455_info; indio_dev->name = name; diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index fee32e3d7a05..dc73f2d85e6d 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -99,6 +99,8 @@ #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10 #define ST_ACCEL_2_IHL_IRQ_ADDR 0x22 #define ST_ACCEL_2_IHL_IRQ_MASK 0x80 +#define ST_ACCEL_2_OD_IRQ_ADDR 0x22 +#define ST_ACCEL_2_OD_IRQ_MASK 0x40 #define ST_ACCEL_2_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 3 */ @@ -180,6 +182,8 @@ #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 #define ST_ACCEL_5_IHL_IRQ_ADDR 0x22 #define ST_ACCEL_5_IHL_IRQ_MASK 0x80 +#define ST_ACCEL_5_OD_IRQ_ADDR 0x22 +#define ST_ACCEL_5_OD_IRQ_MASK 0x40 #define ST_ACCEL_5_IG1_EN_ADDR 0x21 #define ST_ACCEL_5_IG1_EN_MASK 0x08 #define ST_ACCEL_5_MULTIREAD_BIT false @@ -332,6 +336,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, .bootime = 2, @@ -397,6 +402,9 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK, + .addr_od = ST_ACCEL_2_OD_IRQ_ADDR, + .mask_od = ST_ACCEL_2_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, .bootime = 2, @@ -474,6 +482,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, .ig1 = { .en_addr = ST_ACCEL_3_IG1_EN_ADDR, .en_mask = ST_ACCEL_3_IG1_EN_MASK, @@ -532,6 +541,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .drdy_irq = { .addr = ST_ACCEL_4_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT, .bootime = 2, /* guess */ @@ -583,6 +593,9 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR, .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK, + .addr_od = ST_ACCEL_5_OD_IRQ_ADDR, + .mask_od = ST_ACCEL_5_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, .bootime = 2, /* guess */ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 5937030f0444..25378c5882e2 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -385,11 +385,11 @@ config ROCKCHIP_SARADC module will be called rockchip_saradc. config TI_ADC081C - tristate "Texas Instruments ADC081C021/027" + tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" depends on I2C help - If you say yes here you get support for Texas Instruments ADC081C021 - and ADC081C027 ADC chips. + If you say yes here you get support for Texas Instruments ADC081C, + ADC101C and ADC121C ADC chips. This driver can also be built as a module. If so, the module will be called ti-adc081c. diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c index 01d71588d752..a3f5254f4e51 100644 --- a/drivers/iio/adc/ad799x.c +++ b/drivers/iio/adc/ad799x.c @@ -477,7 +477,7 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev, if (ret < 0) return ret; *val = (ret >> chan->scan_type.shift) & - GENMASK(chan->scan_type.realbits - 1 , 0); + GENMASK(chan->scan_type.realbits - 1, 0); return IIO_VAL_INT; } diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index f284cd6a93d6..52430ba171f3 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -797,8 +797,8 @@ static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz) * Startup Time = <lookup_table_value> / ADC Clock */ const int startup_lookup[] = { - 0 , 8 , 16 , 24 , - 64 , 80 , 96 , 112, + 0, 8, 16, 24, + 64, 80, 96, 112, 512, 576, 640, 704, 768, 832, 896, 960 }; @@ -924,14 +924,14 @@ static int at91_adc_probe_dt(struct at91_adc_state *st, ret = -EINVAL; goto error_ret; } - trig->name = name; + trig->name = name; if (of_property_read_u32(trig_node, "trigger-value", &prop)) { dev_err(&idev->dev, "Missing trigger-value property in the DT.\n"); ret = -EINVAL; goto error_ret; } - trig->value = prop; + trig->value = prop; trig->is_external = of_property_read_bool(trig_node, "trigger-external"); i++; } diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index d7b36efd2f3c..d1172dc1e8e2 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -61,9 +61,9 @@ static const int mcp3422_scales[4][4] = { { 1000000, 500000, 250000, 125000 }, - { 250000 , 125000, 62500 , 31250 }, - { 62500 , 31250 , 15625 , 7812 }, - { 15625 , 7812 , 3906 , 1953 } }; + { 250000, 125000, 62500, 31250 }, + { 62500, 31250, 15625, 7812 }, + { 15625, 7812, 3906, 1953 } }; /* Constant msleep times for data acquisitions */ static const int mcp3422_read_times[4] = { diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c index 33051b87aac2..ad26da1edbee 100644 --- a/drivers/iio/adc/mxs-lradc.c +++ b/drivers/iio/adc/mxs-lradc.c @@ -686,6 +686,17 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) { + /* Configure the touchscreen type */ + if (lradc->soc == IMX28_LRADC) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + mxs_lradc_reg_set(lradc, + LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + } + mxs_lradc_setup_touch_detection(lradc); lradc->cur_plate = LRADC_TOUCH; @@ -1127,6 +1138,7 @@ static int mxs_lradc_ts_register(struct mxs_lradc *lradc) __set_bit(EV_ABS, input->evbit); __set_bit(EV_KEY, input->evbit); __set_bit(BTN_TOUCH, input->keybit); + __set_bit(INPUT_PROP_DIRECT, input->propbit); input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, @@ -1475,18 +1487,13 @@ static const struct iio_chan_spec mx28_lradc_chan_spec[] = { MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), }; -static int mxs_lradc_hw_init(struct mxs_lradc *lradc) +static void mxs_lradc_hw_init(struct mxs_lradc *lradc) { /* The ADC always uses DELAY CHANNEL 0. */ const u32 adc_cfg = (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); - int ret = stmp_reset_block(lradc->base); - - if (ret) - return ret; - /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); @@ -1495,20 +1502,8 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc) mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - /* Configure the touchscreen type */ - if (lradc->soc == IMX28_LRADC) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - } - /* Start internal temperature sensing. */ mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); - - return 0; } static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) @@ -1708,11 +1703,13 @@ static int mxs_lradc_probe(struct platform_device *pdev) } } - /* Configure the hardware. */ - ret = mxs_lradc_hw_init(lradc); + ret = stmp_reset_block(lradc->base); if (ret) goto err_dev; + /* Configure the hardware. */ + mxs_lradc_hw_init(lradc); + /* Register the touchscreen input device. */ if (touch_ret == 0) { ret = mxs_lradc_ts_register(lradc); diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index ecbc12138d58..9fd032d9f402 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -1,9 +1,21 @@ /* + * TI ADC081C/ADC101C/ADC121C 8/10/12-bit ADC driver + * * Copyright (C) 2012 Avionic Design GmbH + * Copyright (C) 2016 Intel * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * Datasheets: + * http://www.ti.com/lit/ds/symlink/adc081c021.pdf + * http://www.ti.com/lit/ds/symlink/adc101c021.pdf + * http://www.ti.com/lit/ds/symlink/adc121c021.pdf + * + * The devices have a very similar interface and differ mostly in the number of + * bits handled. For the 8-bit and 10-bit models the least-significant 4 or 2 + * bits of value registers are reserved. */ #include <linux/err.h> @@ -12,11 +24,17 @@ #include <linux/of.h> #include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> #include <linux/regulator/consumer.h> struct adc081c { struct i2c_client *i2c; struct regulator *ref; + + /* 8, 10 or 12 */ + int bits; }; #define REG_CONV_RES 0x00 @@ -34,7 +52,7 @@ static int adc081c_read_raw(struct iio_dev *iio, if (err < 0) return err; - *value = (err >> 4) & 0xff; + *value = (err & 0xFFF) >> (12 - adc->bits); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -43,7 +61,7 @@ static int adc081c_read_raw(struct iio_dev *iio, return err; *value = err / 1000; - *shift = 8; + *shift = adc->bits; return IIO_VAL_FRACTIONAL_LOG2; @@ -54,10 +72,53 @@ static int adc081c_read_raw(struct iio_dev *iio, return -EINVAL; } -static const struct iio_chan_spec adc081c_channel = { - .type = IIO_VOLTAGE, - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), +#define ADCxx1C_CHAN(_bits) { \ + .type = IIO_VOLTAGE, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = 16, \ + .shift = 12 - (_bits), \ + .endianness = IIO_CPU, \ + }, \ +} + +#define DEFINE_ADCxx1C_CHANNELS(_name, _bits) \ + static const struct iio_chan_spec _name ## _channels[] = { \ + ADCxx1C_CHAN((_bits)), \ + IIO_CHAN_SOFT_TIMESTAMP(1), \ + }; \ + +#define ADC081C_NUM_CHANNELS 2 + +struct adcxx1c_model { + const struct iio_chan_spec* channels; + int bits; +}; + +#define ADCxx1C_MODEL(_name, _bits) \ + { \ + .channels = _name ## _channels, \ + .bits = (_bits), \ + } + +DEFINE_ADCxx1C_CHANNELS(adc081c, 8); +DEFINE_ADCxx1C_CHANNELS(adc101c, 10); +DEFINE_ADCxx1C_CHANNELS(adc121c, 12); + +/* Model ids are indexes in _models array */ +enum adcxx1c_model_id { + ADC081C = 0, + ADC101C = 1, + ADC121C = 2, +}; + +static struct adcxx1c_model adcxx1c_models[] = { + ADCxx1C_MODEL(adc081c, 8), + ADCxx1C_MODEL(adc101c, 10), + ADCxx1C_MODEL(adc121c, 12), }; static const struct iio_info adc081c_info = { @@ -65,11 +126,30 @@ static const struct iio_info adc081c_info = { .driver_module = THIS_MODULE, }; +static irqreturn_t adc081c_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct adc081c *data = iio_priv(indio_dev); + u16 buf[8]; /* 2 bytes data + 6 bytes padding + 8 bytes timestamp */ + int ret; + + ret = i2c_smbus_read_word_swapped(data->i2c, REG_CONV_RES); + if (ret < 0) + goto out; + buf[0] = ret; + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); +out: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + static int adc081c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct iio_dev *iio; struct adc081c *adc; + struct adcxx1c_model *model = &adcxx1c_models[id->driver_data]; int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) @@ -81,6 +161,7 @@ static int adc081c_probe(struct i2c_client *client, adc = iio_priv(iio); adc->i2c = client; + adc->bits = model->bits; adc->ref = devm_regulator_get(&client->dev, "vref"); if (IS_ERR(adc->ref)) @@ -95,18 +176,26 @@ static int adc081c_probe(struct i2c_client *client, iio->modes = INDIO_DIRECT_MODE; iio->info = &adc081c_info; - iio->channels = &adc081c_channel; - iio->num_channels = 1; + iio->channels = model->channels; + iio->num_channels = ADC081C_NUM_CHANNELS; + + err = iio_triggered_buffer_setup(iio, NULL, adc081c_trigger_handler, NULL); + if (err < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + goto err_regulator_disable; + } err = iio_device_register(iio); if (err < 0) - goto regulator_disable; + goto err_buffer_cleanup; i2c_set_clientdata(client, iio); return 0; -regulator_disable: +err_buffer_cleanup: + iio_triggered_buffer_cleanup(iio); +err_regulator_disable: regulator_disable(adc->ref); return err; @@ -118,13 +207,16 @@ static int adc081c_remove(struct i2c_client *client) struct adc081c *adc = iio_priv(iio); iio_device_unregister(iio); + iio_triggered_buffer_cleanup(iio); regulator_disable(adc->ref); return 0; } static const struct i2c_device_id adc081c_id[] = { - { "adc081c", 0 }, + { "adc081c", ADC081C }, + { "adc101c", ADC101C }, + { "adc121c", ADC121C }, { } }; MODULE_DEVICE_TABLE(i2c, adc081c_id); @@ -132,6 +224,8 @@ MODULE_DEVICE_TABLE(i2c, adc081c_id); #ifdef CONFIG_OF static const struct of_device_id adc081c_of_match[] = { { .compatible = "ti,adc081c" }, + { .compatible = "ti,adc101c" }, + { .compatible = "ti,adc121c" }, { } }; MODULE_DEVICE_TABLE(of, adc081c_of_match); @@ -149,5 +243,5 @@ static struct i2c_driver adc081c_driver = { module_i2c_driver(adc081c_driver); MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); -MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver"); +MODULE_DESCRIPTION("Texas Instruments ADC081C/ADC101C/ADC121C driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index b10f629cc44b..653bf1379d2e 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -714,19 +714,19 @@ static int vf610_write_raw(struct iio_dev *indio_dev, int i; switch (mask) { - case IIO_CHAN_INFO_SAMP_FREQ: - for (i = 0; - i < ARRAY_SIZE(info->sample_freq_avail); - i++) - if (val == info->sample_freq_avail[i]) { - info->adc_feature.sample_rate = i; - vf610_adc_sample_set(info); - return 0; - } - break; + case IIO_CHAN_INFO_SAMP_FREQ: + for (i = 0; + i < ARRAY_SIZE(info->sample_freq_avail); + i++) + if (val == info->sample_freq_avail[i]) { + info->adc_feature.sample_rate = i; + vf610_adc_sample_set(info); + return 0; + } + break; - default: - break; + default: + break; } return -EINVAL; diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index 595511022795..5b41f9d0d4f3 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -115,7 +115,7 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state) return ret; } - return 0; + return 0; #else atomic_set(&st->user_requested_state, state); return _hid_sensor_power_state(st, state); diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c index 669dc7c270f5..ecf7721ecaf4 100644 --- a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c +++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c @@ -106,7 +106,7 @@ int ms_sensors_convert_and_read(void *cli, u8 conv, u8 rd, unsigned int delay, u32 *adc) { int ret; - __be32 buf = 0; + __be32 buf = 0; struct i2c_client *client = (struct i2c_client *)cli; /* Trigger conversion */ diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c index 73764961feac..c55898543a47 100644 --- a/drivers/iio/common/st_sensors/st_sensors_buffer.c +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c @@ -24,67 +24,30 @@ int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf) { - u8 addr[3]; /* no ST sensor has more than 3 channels */ - int i, n = 0, len; + int i, len; + int total = 0; struct st_sensor_data *sdata = iio_priv(indio_dev); unsigned int num_data_channels = sdata->num_data_channels; - unsigned int byte_for_channel = - indio_dev->channels[0].scan_type.storagebits >> 3; for (i = 0; i < num_data_channels; i++) { + unsigned int bytes_to_read; + if (test_bit(i, indio_dev->active_scan_mask)) { - addr[n] = indio_dev->channels[i].address; - n++; - } - } - switch (n) { - case 1: - len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, - addr[0], byte_for_channel, buf, sdata->multiread_bit); - break; - case 2: - if ((addr[1] - addr[0]) == byte_for_channel) { + bytes_to_read = indio_dev->channels[i].scan_type.storagebits >> 3; len = sdata->tf->read_multiple_byte(&sdata->tb, - sdata->dev, addr[0], byte_for_channel * n, - buf, sdata->multiread_bit); - } else { - u8 *rx_array; - rx_array = kmalloc(byte_for_channel * num_data_channels, - GFP_KERNEL); - if (!rx_array) - return -ENOMEM; + sdata->dev, indio_dev->channels[i].address, + bytes_to_read, + buf + total, sdata->multiread_bit); - len = sdata->tf->read_multiple_byte(&sdata->tb, - sdata->dev, addr[0], - byte_for_channel * num_data_channels, - rx_array, sdata->multiread_bit); - if (len < 0) { - kfree(rx_array); - return len; - } - - for (i = 0; i < n * byte_for_channel; i++) { - if (i < n) - buf[i] = rx_array[i]; - else - buf[i] = rx_array[n + i]; - } - kfree(rx_array); - len = byte_for_channel * n; + if (len < bytes_to_read) + return -EIO; + + /* Advance the buffer pointer */ + total += len; } - break; - case 3: - len = sdata->tf->read_multiple_byte(&sdata->tb, sdata->dev, - addr[0], byte_for_channel * num_data_channels, - buf, sdata->multiread_bit); - break; - default: - return -EINVAL; } - if (len != byte_for_channel * n) - return -EIO; - return len; + return total; } EXPORT_SYMBOL(st_sensors_get_buffer_element); @@ -95,6 +58,24 @@ irqreturn_t st_sensors_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct st_sensor_data *sdata = iio_priv(indio_dev); + /* If we have a status register, check if this IRQ came from us */ + if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) { + u8 status; + + len = sdata->tf->read_byte(&sdata->tb, sdata->dev, + sdata->sensor_settings->drdy_irq.addr_stat_drdy, + &status); + if (len < 0) + dev_err(sdata->dev, "could not read channel status\n"); + + /* + * If this was not caused by any channels on this sensor, + * return IRQ_NONE + */ + if (!(status & (u8)indio_dev->active_scan_mask[0])) + return IRQ_NONE; + } + len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data); if (len < 0) goto st_sensors_get_buffer_element_error; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index f5a2d445d0c0..dffe00692169 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -301,6 +301,14 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev, return -EINVAL; } + if (pdata->open_drain) { + if (!sdata->sensor_settings->drdy_irq.addr_od) + dev_err(&indio_dev->dev, + "open drain requested but unsupported.\n"); + else + sdata->int_pin_open_drain = true; + } + return 0; } @@ -321,6 +329,8 @@ static struct st_sensors_platform_data *st_sensors_of_probe(struct device *dev, else pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 0; + pdata->open_drain = of_property_read_bool(np, "drive-open-drain"); + return pdata; } #else @@ -374,6 +384,16 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, return err; } + if (sdata->int_pin_open_drain) { + dev_info(&indio_dev->dev, + "set interrupt line to open drain mode\n"); + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->drdy_irq.addr_od, + sdata->sensor_settings->drdy_irq.mask_od, 1); + if (err < 0) + return err; + } + err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS); return err; diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 6a8c98327945..da72279fcf99 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -64,6 +64,19 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, "rising edge\n", irq_trig); irq_trig = IRQF_TRIGGER_RISING; } + + /* + * If the interrupt pin is Open Drain, by definition this + * means that the interrupt line may be shared with other + * peripherals. But to do this we also need to have a status + * register and mask to figure out if this sensor was firing + * the IRQ or not, so we can tell the interrupt handle that + * it was "our" interrupt. + */ + if (sdata->int_pin_open_drain && + sdata->sensor_settings->drdy_irq.addr_stat_drdy) + irq_trig |= IRQF_SHARED; + err = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 210db81ca144..61d5008bff5c 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -74,6 +74,33 @@ config AD5449 To compile this driver as a module, choose M here: the module will be called ad5449. +config AD5592R_BASE + tristate + +config AD5592R + tristate "Analog Devices AD5592R ADC/DAC driver" + depends on SPI_MASTER + select GPIOLIB + select AD5592R_BASE + help + Say yes here to build support for Analog Devices AD5592R + Digital to Analog / Analog to Digital Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5592r. + +config AD5593R + tristate "Analog Devices AD5593R ADC/DAC driver" + depends on I2C + select GPIOLIB + select AD5592R_BASE + help + Say yes here to build support for Analog Devices AD5593R + Digital to Analog / Analog to Digital Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5593r. + config AD5504 tristate "Analog Devices AD5504/AD5501 DAC SPI driver" depends on SPI diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 420a15cdaa53..8b78d5ca9b11 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -11,6 +11,9 @@ obj-$(CONFIG_AD5064) += ad5064.o obj-$(CONFIG_AD5504) += ad5504.o obj-$(CONFIG_AD5446) += ad5446.o obj-$(CONFIG_AD5449) += ad5449.o +obj-$(CONFIG_AD5592R_BASE) += ad5592r-base.o +obj-$(CONFIG_AD5592R) += ad5592r.o +obj-$(CONFIG_AD5593R) += ad5593r.o obj-$(CONFIG_AD5755) += ad5755.o obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c new file mode 100644 index 000000000000..948f600e7059 --- /dev/null +++ b/drivers/iio/dac/ad5592r-base.c @@ -0,0 +1,691 @@ +/* + * AD5592R Digital <-> Analog converters driver + * + * Copyright 2014-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/gpio.h> +#include <linux/property.h> + +#include <dt-bindings/iio/adi,ad5592r.h> + +#include "ad5592r-base.h" + +static int ad5592r_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + int ret = 0; + u8 val; + + mutex_lock(&st->gpio_lock); + + if (st->gpio_out & BIT(offset)) + val = st->gpio_val; + else + ret = st->ops->gpio_read(st, &val); + + mutex_unlock(&st->gpio_lock); + + if (ret < 0) + return ret; + + return !!(val & BIT(offset)); +} + +static void ad5592r_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + + mutex_lock(&st->gpio_lock); + + if (value) + st->gpio_val |= BIT(offset); + else + st->gpio_val &= ~BIT(offset); + + st->ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val); + + mutex_unlock(&st->gpio_lock); +} + +static int ad5592r_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + int ret; + + mutex_lock(&st->gpio_lock); + + st->gpio_out &= ~BIT(offset); + st->gpio_in |= BIT(offset); + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_OUT_EN, st->gpio_out); + if (ret < 0) + goto err_unlock; + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_IN_EN, st->gpio_in); + +err_unlock: + mutex_unlock(&st->gpio_lock); + + return ret; +} + +static int ad5592r_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + int ret; + + mutex_lock(&st->gpio_lock); + + if (value) + st->gpio_val |= BIT(offset); + else + st->gpio_val &= ~BIT(offset); + + st->gpio_in &= ~BIT(offset); + st->gpio_out |= BIT(offset); + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val); + if (ret < 0) + goto err_unlock; + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_OUT_EN, st->gpio_out); + if (ret < 0) + goto err_unlock; + + ret = st->ops->reg_write(st, AD5592R_REG_GPIO_IN_EN, st->gpio_in); + +err_unlock: + mutex_unlock(&st->gpio_lock); + + return ret; +} + +static int ad5592r_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct ad5592r_state *st = gpiochip_get_data(chip); + + if (!(st->gpio_map & BIT(offset))) { + dev_err(st->dev, "GPIO %d is reserved by alternate function\n", + offset); + return -ENODEV; + } + + return 0; +} + +static int ad5592r_gpio_init(struct ad5592r_state *st) +{ + if (!st->gpio_map) + return 0; + + st->gpiochip.label = dev_name(st->dev); + st->gpiochip.base = -1; + st->gpiochip.ngpio = 8; + st->gpiochip.parent = st->dev; + st->gpiochip.can_sleep = true; + st->gpiochip.direction_input = ad5592r_gpio_direction_input; + st->gpiochip.direction_output = ad5592r_gpio_direction_output; + st->gpiochip.get = ad5592r_gpio_get; + st->gpiochip.set = ad5592r_gpio_set; + st->gpiochip.request = ad5592r_gpio_request; + st->gpiochip.owner = THIS_MODULE; + + mutex_init(&st->gpio_lock); + + return gpiochip_add_data(&st->gpiochip, st); +} + +static void ad5592r_gpio_cleanup(struct ad5592r_state *st) +{ + if (st->gpio_map) + gpiochip_remove(&st->gpiochip); +} + +static int ad5592r_reset(struct ad5592r_state *st) +{ + struct gpio_desc *gpio; + struct iio_dev *iio_dev = iio_priv_to_dev(st); + + gpio = devm_gpiod_get_optional(st->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + if (gpio) { + udelay(1); + gpiod_set_value(gpio, 1); + } else { + mutex_lock(&iio_dev->mlock); + /* Writing this magic value resets the device */ + st->ops->reg_write(st, AD5592R_REG_RESET, 0xdac); + mutex_unlock(&iio_dev->mlock); + } + + udelay(250); + + return 0; +} + +static int ad5592r_get_vref(struct ad5592r_state *st) +{ + int ret; + + if (st->reg) { + ret = regulator_get_voltage(st->reg); + if (ret < 0) + return ret; + + return ret / 1000; + } else { + return 2500; + } +} + +static int ad5592r_set_channel_modes(struct ad5592r_state *st) +{ + const struct ad5592r_rw_ops *ops = st->ops; + int ret; + unsigned i; + struct iio_dev *iio_dev = iio_priv_to_dev(st); + u8 pulldown = 0, tristate = 0, dac = 0, adc = 0; + u16 read_back; + + for (i = 0; i < st->num_channels; i++) { + switch (st->channel_modes[i]) { + case CH_MODE_DAC: + dac |= BIT(i); + break; + + case CH_MODE_ADC: + adc |= BIT(i); + break; + + case CH_MODE_DAC_AND_ADC: + dac |= BIT(i); + adc |= BIT(i); + break; + + case CH_MODE_GPIO: + st->gpio_map |= BIT(i); + st->gpio_in |= BIT(i); /* Default to input */ + break; + + case CH_MODE_UNUSED: + /* fall-through */ + default: + switch (st->channel_offstate[i]) { + case CH_OFFSTATE_OUT_TRISTATE: + tristate |= BIT(i); + break; + + case CH_OFFSTATE_OUT_LOW: + st->gpio_out |= BIT(i); + break; + + case CH_OFFSTATE_OUT_HIGH: + st->gpio_out |= BIT(i); + st->gpio_val |= BIT(i); + break; + + case CH_OFFSTATE_PULLDOWN: + /* fall-through */ + default: + pulldown |= BIT(i); + break; + } + } + } + + mutex_lock(&iio_dev->mlock); + + /* Pull down unused pins to GND */ + ret = ops->reg_write(st, AD5592R_REG_PULLDOWN, pulldown); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_TRISTATE, tristate); + if (ret) + goto err_unlock; + + /* Configure pins that we use */ + ret = ops->reg_write(st, AD5592R_REG_DAC_EN, dac); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_ADC_EN, adc); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_GPIO_OUT_EN, st->gpio_out); + if (ret) + goto err_unlock; + + ret = ops->reg_write(st, AD5592R_REG_GPIO_IN_EN, st->gpio_in); + if (ret) + goto err_unlock; + + /* Verify that we can read back at least one register */ + ret = ops->reg_read(st, AD5592R_REG_ADC_EN, &read_back); + if (!ret && (read_back & 0xff) != adc) + ret = -EIO; + +err_unlock: + mutex_unlock(&iio_dev->mlock); + return ret; +} + +static int ad5592r_reset_channel_modes(struct ad5592r_state *st) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(st->channel_modes); i++) + st->channel_modes[i] = CH_MODE_UNUSED; + + return ad5592r_set_channel_modes(st); +} + +static int ad5592r_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct ad5592r_state *st = iio_priv(iio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + + if (val >= (1 << chan->scan_type.realbits) || val < 0) + return -EINVAL; + + if (!chan->output) + return -EINVAL; + + mutex_lock(&iio_dev->mlock); + ret = st->ops->write_dac(st, chan->channel, val); + if (!ret) + st->cached_dac[chan->channel] = val; + mutex_unlock(&iio_dev->mlock); + return ret; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_VOLTAGE) { + bool gain; + + if (val == st->scale_avail[0][0] && + val2 == st->scale_avail[0][1]) + gain = false; + else if (val == st->scale_avail[1][0] && + val2 == st->scale_avail[1][1]) + gain = true; + else + return -EINVAL; + + mutex_lock(&iio_dev->mlock); + + ret = st->ops->reg_read(st, AD5592R_REG_CTRL, + &st->cached_gp_ctrl); + if (ret < 0) { + mutex_unlock(&iio_dev->mlock); + return ret; + } + + if (chan->output) { + if (gain) + st->cached_gp_ctrl |= + AD5592R_REG_CTRL_DAC_RANGE; + else + st->cached_gp_ctrl &= + ~AD5592R_REG_CTRL_DAC_RANGE; + } else { + if (gain) + st->cached_gp_ctrl |= + AD5592R_REG_CTRL_ADC_RANGE; + else + st->cached_gp_ctrl &= + ~AD5592R_REG_CTRL_ADC_RANGE; + } + + ret = st->ops->reg_write(st, AD5592R_REG_CTRL, + st->cached_gp_ctrl); + mutex_unlock(&iio_dev->mlock); + + return ret; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ad5592r_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long m) +{ + struct ad5592r_state *st = iio_priv(iio_dev); + u16 read_val; + int ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&iio_dev->mlock); + + if (!chan->output) { + ret = st->ops->read_adc(st, chan->channel, &read_val); + if (ret) + goto unlock; + + if ((read_val >> 12 & 0x7) != (chan->channel & 0x7)) { + dev_err(st->dev, "Error while reading channel %u\n", + chan->channel); + ret = -EIO; + goto unlock; + } + + read_val &= GENMASK(11, 0); + + } else { + read_val = st->cached_dac[chan->channel]; + } + + dev_dbg(st->dev, "Channel %u read: 0x%04hX\n", + chan->channel, read_val); + + *val = (int) read_val; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = ad5592r_get_vref(st); + + if (chan->type == IIO_TEMP) { + s64 tmp = *val * (3767897513LL / 25LL); + *val = div_s64_rem(tmp, 1000000000LL, val2); + + ret = IIO_VAL_INT_PLUS_MICRO; + } else { + int mult; + + mutex_lock(&iio_dev->mlock); + + if (chan->output) + mult = !!(st->cached_gp_ctrl & + AD5592R_REG_CTRL_DAC_RANGE); + else + mult = !!(st->cached_gp_ctrl & + AD5592R_REG_CTRL_ADC_RANGE); + + *val *= ++mult; + + *val2 = chan->scan_type.realbits; + ret = IIO_VAL_FRACTIONAL_LOG2; + } + break; + case IIO_CHAN_INFO_OFFSET: + ret = ad5592r_get_vref(st); + + mutex_lock(&iio_dev->mlock); + + if (st->cached_gp_ctrl & AD5592R_REG_CTRL_ADC_RANGE) + *val = (-34365 * 25) / ret; + else + *val = (-75365 * 25) / ret; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + } + +unlock: + mutex_unlock(&iio_dev->mlock); + return ret; +} + +static int ad5592r_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + + default: + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; +} + +static const struct iio_info ad5592r_info = { + .read_raw = ad5592r_read_raw, + .write_raw = ad5592r_write_raw, + .write_raw_get_fmt = ad5592r_write_raw_get_fmt, + .driver_module = THIS_MODULE, +}; + +static ssize_t ad5592r_show_scale_available(struct iio_dev *iio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct ad5592r_state *st = iio_priv(iio_dev); + + return sprintf(buf, "%d.%09u %d.%09u\n", + st->scale_avail[0][0], st->scale_avail[0][1], + st->scale_avail[1][0], st->scale_avail[1][1]); +} + +static struct iio_chan_spec_ext_info ad5592r_ext_info[] = { + { + .name = "scale_available", + .read = ad5592r_show_scale_available, + .shared = true, + }, + {}, +}; + +static void ad5592r_setup_channel(struct iio_dev *iio_dev, + struct iio_chan_spec *chan, bool output, unsigned id) +{ + chan->type = IIO_VOLTAGE; + chan->indexed = 1; + chan->output = output; + chan->channel = id; + chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + chan->scan_type.sign = 'u'; + chan->scan_type.realbits = 12; + chan->scan_type.storagebits = 16; + chan->ext_info = ad5592r_ext_info; +} + +static int ad5592r_alloc_channels(struct ad5592r_state *st) +{ + unsigned i, curr_channel = 0, + num_channels = st->num_channels; + struct iio_dev *iio_dev = iio_priv_to_dev(st); + struct iio_chan_spec *channels; + struct fwnode_handle *child; + u32 reg, tmp; + int ret; + + device_for_each_child_node(st->dev, child) { + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret || reg > ARRAY_SIZE(st->channel_modes)) + continue; + + ret = fwnode_property_read_u32(child, "adi,mode", &tmp); + if (!ret) + st->channel_modes[reg] = tmp; + + fwnode_property_read_u32(child, "adi,off-state", &tmp); + if (!ret) + st->channel_offstate[reg] = tmp; + } + + channels = devm_kzalloc(st->dev, + (1 + 2 * num_channels) * sizeof(*channels), GFP_KERNEL); + if (!channels) + return -ENOMEM; + + for (i = 0; i < num_channels; i++) { + switch (st->channel_modes[i]) { + case CH_MODE_DAC: + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + true, i); + curr_channel++; + break; + + case CH_MODE_ADC: + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + false, i); + curr_channel++; + break; + + case CH_MODE_DAC_AND_ADC: + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + true, i); + curr_channel++; + ad5592r_setup_channel(iio_dev, &channels[curr_channel], + false, i); + curr_channel++; + break; + + default: + continue; + } + } + + channels[curr_channel].type = IIO_TEMP; + channels[curr_channel].channel = 8; + channels[curr_channel].info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET); + curr_channel++; + + iio_dev->num_channels = curr_channel; + iio_dev->channels = channels; + + return 0; +} + +static void ad5592r_init_scales(struct ad5592r_state *st, int vref_mV) +{ + s64 tmp = (s64)vref_mV * 1000000000LL >> 12; + + st->scale_avail[0][0] = + div_s64_rem(tmp, 1000000000LL, &st->scale_avail[0][1]); + st->scale_avail[1][0] = + div_s64_rem(tmp * 2, 1000000000LL, &st->scale_avail[1][1]); +} + +int ad5592r_probe(struct device *dev, const char *name, + const struct ad5592r_rw_ops *ops) +{ + struct iio_dev *iio_dev; + struct ad5592r_state *st; + int ret; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!iio_dev) + return -ENOMEM; + + st = iio_priv(iio_dev); + st->dev = dev; + st->ops = ops; + st->num_channels = 8; + dev_set_drvdata(dev, iio_dev); + + st->reg = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(st->reg)) { + if ((PTR_ERR(st->reg) != -ENODEV) && dev->of_node) + return PTR_ERR(st->reg); + + st->reg = NULL; + } else { + ret = regulator_enable(st->reg); + if (ret) + return ret; + } + + iio_dev->dev.parent = dev; + iio_dev->name = name; + iio_dev->info = &ad5592r_info; + iio_dev->modes = INDIO_DIRECT_MODE; + + ad5592r_init_scales(st, ad5592r_get_vref(st)); + + ret = ad5592r_reset(st); + if (ret) + goto error_disable_reg; + + ret = ops->reg_write(st, AD5592R_REG_PD, + (st->reg == NULL) ? AD5592R_REG_PD_EN_REF : 0); + if (ret) + goto error_disable_reg; + + ret = ad5592r_alloc_channels(st); + if (ret) + goto error_disable_reg; + + ret = ad5592r_set_channel_modes(st); + if (ret) + goto error_reset_ch_modes; + + ret = iio_device_register(iio_dev); + if (ret) + goto error_reset_ch_modes; + + ret = ad5592r_gpio_init(st); + if (ret) + goto error_dev_unregister; + + return 0; + +error_dev_unregister: + iio_device_unregister(iio_dev); + +error_reset_ch_modes: + ad5592r_reset_channel_modes(st); + +error_disable_reg: + if (st->reg) + regulator_disable(st->reg); + + return ret; +} +EXPORT_SYMBOL_GPL(ad5592r_probe); + +int ad5592r_remove(struct device *dev) +{ + struct iio_dev *iio_dev = dev_get_drvdata(dev); + struct ad5592r_state *st = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); + ad5592r_reset_channel_modes(st); + ad5592r_gpio_cleanup(st); + + if (st->reg) + regulator_disable(st->reg); + + return 0; +} +EXPORT_SYMBOL_GPL(ad5592r_remove); + +MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5592r-base.h b/drivers/iio/dac/ad5592r-base.h new file mode 100644 index 000000000000..841457e93f85 --- /dev/null +++ b/drivers/iio/dac/ad5592r-base.h @@ -0,0 +1,76 @@ +/* + * AD5592R / AD5593R Digital <-> Analog converters driver + * + * Copyright 2015-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#ifndef __DRIVERS_IIO_DAC_AD5592R_BASE_H__ +#define __DRIVERS_IIO_DAC_AD5592R_BASE_H__ + +#include <linux/types.h> +#include <linux/cache.h> +#include <linux/mutex.h> +#include <linux/gpio/driver.h> + +struct device; +struct ad5592r_state; + +enum ad5592r_registers { + AD5592R_REG_NOOP = 0x0, + AD5592R_REG_DAC_READBACK = 0x1, + AD5592R_REG_ADC_SEQ = 0x2, + AD5592R_REG_CTRL = 0x3, + AD5592R_REG_ADC_EN = 0x4, + AD5592R_REG_DAC_EN = 0x5, + AD5592R_REG_PULLDOWN = 0x6, + AD5592R_REG_LDAC = 0x7, + AD5592R_REG_GPIO_OUT_EN = 0x8, + AD5592R_REG_GPIO_SET = 0x9, + AD5592R_REG_GPIO_IN_EN = 0xA, + AD5592R_REG_PD = 0xB, + AD5592R_REG_OPEN_DRAIN = 0xC, + AD5592R_REG_TRISTATE = 0xD, + AD5592R_REG_RESET = 0xF, +}; + +#define AD5592R_REG_PD_EN_REF BIT(9) +#define AD5592R_REG_CTRL_ADC_RANGE BIT(5) +#define AD5592R_REG_CTRL_DAC_RANGE BIT(4) + +struct ad5592r_rw_ops { + int (*write_dac)(struct ad5592r_state *st, unsigned chan, u16 value); + int (*read_adc)(struct ad5592r_state *st, unsigned chan, u16 *value); + int (*reg_write)(struct ad5592r_state *st, u8 reg, u16 value); + int (*reg_read)(struct ad5592r_state *st, u8 reg, u16 *value); + int (*gpio_read)(struct ad5592r_state *st, u8 *value); +}; + +struct ad5592r_state { + struct device *dev; + struct regulator *reg; + struct gpio_chip gpiochip; + struct mutex gpio_lock; /* Protect cached gpio_out, gpio_val, etc. */ + unsigned int num_channels; + const struct ad5592r_rw_ops *ops; + int scale_avail[2][2]; + u16 cached_dac[8]; + u16 cached_gp_ctrl; + u8 channel_modes[8]; + u8 channel_offstate[8]; + u8 gpio_map; + u8 gpio_out; + u8 gpio_in; + u8 gpio_val; + + __be16 spi_msg ____cacheline_aligned; + __be16 spi_msg_nop; +}; + +int ad5592r_probe(struct device *dev, const char *name, + const struct ad5592r_rw_ops *ops); +int ad5592r_remove(struct device *dev); + +#endif /* __DRIVERS_IIO_DAC_AD5592R_BASE_H__ */ diff --git a/drivers/iio/dac/ad5592r.c b/drivers/iio/dac/ad5592r.c new file mode 100644 index 000000000000..0b235a2c7359 --- /dev/null +++ b/drivers/iio/dac/ad5592r.c @@ -0,0 +1,164 @@ +/* + * AD5592R Digital <-> Analog converters driver + * + * Copyright 2015-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#include "ad5592r-base.h" + +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/spi/spi.h> + +#define AD5592R_GPIO_READBACK_EN BIT(10) +#define AD5592R_LDAC_READBACK_EN BIT(6) + +static int ad5592r_spi_wnop_r16(struct ad5592r_state *st, u16 *buf) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + struct spi_transfer t = { + .tx_buf = &st->spi_msg_nop, + .rx_buf = buf, + .len = 2 + }; + + st->spi_msg_nop = 0; /* NOP */ + + return spi_sync_transfer(spi, &t, 1); +} + +static int ad5592r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + + st->spi_msg = cpu_to_be16(BIT(15) | (chan << 12) | value); + + return spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); +} + +static int ad5592r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + int ret; + + st->spi_msg = cpu_to_be16((AD5592R_REG_ADC_SEQ << 11) | BIT(chan)); + + ret = spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); + if (ret) + return ret; + + /* + * Invalid data: + * See Figure 40. Single-Channel ADC Conversion Sequence + */ + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + *value = be16_to_cpu(st->spi_msg); + + return 0; +} + +static int ad5592r_reg_write(struct ad5592r_state *st, u8 reg, u16 value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + + st->spi_msg = cpu_to_be16((reg << 11) | value); + + return spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); +} + +static int ad5592r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value) +{ + struct spi_device *spi = container_of(st->dev, struct spi_device, dev); + int ret; + + st->spi_msg = cpu_to_be16((AD5592R_REG_LDAC << 11) | + AD5592R_LDAC_READBACK_EN | (reg << 2)); + + ret = spi_write(spi, &st->spi_msg, sizeof(st->spi_msg)); + if (ret) + return ret; + + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + *value = be16_to_cpu(st->spi_msg); + + return 0; +} + +static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value) +{ + int ret; + + ret = ad5592r_reg_write(st, AD5592R_REG_GPIO_IN_EN, + AD5592R_GPIO_READBACK_EN | st->gpio_in); + if (ret) + return ret; + + ret = ad5592r_spi_wnop_r16(st, &st->spi_msg); + if (ret) + return ret; + + *value = (u8) be16_to_cpu(st->spi_msg); + + return 0; +} + +static const struct ad5592r_rw_ops ad5592r_rw_ops = { + .write_dac = ad5592r_write_dac, + .read_adc = ad5592r_read_adc, + .reg_write = ad5592r_reg_write, + .reg_read = ad5592r_reg_read, + .gpio_read = ad5593r_gpio_read, +}; + +static int ad5592r_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad5592r_probe(&spi->dev, id->name, &ad5592r_rw_ops); +} + +static int ad5592r_spi_remove(struct spi_device *spi) +{ + return ad5592r_remove(&spi->dev); +} + +static const struct spi_device_id ad5592r_spi_ids[] = { + { .name = "ad5592r", }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5592r_spi_ids); + +static const struct of_device_id ad5592r_of_match[] = { + { .compatible = "adi,ad5592r", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ad5592r_of_match); + +static struct spi_driver ad5592r_spi_driver = { + .driver = { + .name = "ad5592r", + .of_match_table = of_match_ptr(ad5592r_of_match), + }, + .probe = ad5592r_spi_probe, + .remove = ad5592r_spi_remove, + .id_table = ad5592r_spi_ids, +}; +module_spi_driver(ad5592r_spi_driver); + +MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c new file mode 100644 index 000000000000..dca158a88f47 --- /dev/null +++ b/drivers/iio/dac/ad5593r.c @@ -0,0 +1,131 @@ +/* + * AD5593R Digital <-> Analog converters driver + * + * Copyright 2015-2016 Analog Devices Inc. + * Author: Paul Cercueil <paul.cercueil@analog.com> + * + * Licensed under the GPL-2. + */ + +#include "ad5592r-base.h" + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> + +#define AD5593R_MODE_CONF (0 << 4) +#define AD5593R_MODE_DAC_WRITE (1 << 4) +#define AD5593R_MODE_ADC_READBACK (4 << 4) +#define AD5593R_MODE_DAC_READBACK (5 << 4) +#define AD5593R_MODE_GPIO_READBACK (6 << 4) +#define AD5593R_MODE_REG_READBACK (7 << 4) + +static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + + return i2c_smbus_write_word_swapped(i2c, + AD5593R_MODE_DAC_WRITE | chan, value); +} + +static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + s32 val; + + val = i2c_smbus_write_word_swapped(i2c, + AD5593R_MODE_CONF | AD5592R_REG_ADC_SEQ, BIT(chan)); + if (val < 0) + return (int) val; + + val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_ADC_READBACK); + if (val < 0) + return (int) val; + + *value = (u16) val; + + return 0; +} + +static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + + return i2c_smbus_write_word_swapped(i2c, + AD5593R_MODE_CONF | reg, value); +} + +static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + s32 val; + + val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_REG_READBACK | reg); + if (val < 0) + return (int) val; + + *value = (u16) val; + + return 0; +} + +static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + s32 val; + + val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_GPIO_READBACK); + if (val < 0) + return (int) val; + + *value = (u8) val; + + return 0; +} + +static const struct ad5592r_rw_ops ad5593r_rw_ops = { + .write_dac = ad5593r_write_dac, + .read_adc = ad5593r_read_adc, + .reg_write = ad5593r_reg_write, + .reg_read = ad5593r_reg_read, + .gpio_read = ad5593r_gpio_read, +}; + +static int ad5593r_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + return ad5592r_probe(&i2c->dev, id->name, &ad5593r_rw_ops); +} + +static int ad5593r_i2c_remove(struct i2c_client *i2c) +{ + return ad5592r_remove(&i2c->dev); +} + +static const struct i2c_device_id ad5593r_i2c_ids[] = { + { .name = "ad5593r", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ad5593r_i2c_ids); + +static const struct of_device_id ad5593r_of_match[] = { + { .compatible = "adi,ad5593r", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ad5593r_of_match); + +static struct i2c_driver ad5593r_driver = { + .driver = { + .name = "ad5593r", + .of_match_table = of_match_ptr(ad5593r_of_match), + }, + .probe = ad5593r_i2c_probe, + .remove = ad5593r_i2c_remove, + .id_table = ad5593r_i2c_ids, +}; +module_i2c_driver(ad5593r_driver); + +MODULE_AUTHOR("Paul Cercueil <paul.cercueil@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5592R multi-channel converters"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index 44a30f286de1..99eba524f6dd 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -284,7 +284,7 @@ struct ad9523_state { } data[2] ____cacheline_aligned; }; -static int ad9523_read(struct iio_dev *indio_dev, unsigned addr) +static int ad9523_read(struct iio_dev *indio_dev, unsigned int addr) { struct ad9523_state *st = iio_priv(indio_dev); int ret; @@ -318,7 +318,8 @@ static int ad9523_read(struct iio_dev *indio_dev, unsigned addr) return ret; }; -static int ad9523_write(struct iio_dev *indio_dev, unsigned addr, unsigned val) +static int ad9523_write(struct iio_dev *indio_dev, + unsigned int addr, unsigned int val) { struct ad9523_state *st = iio_priv(indio_dev); int ret; @@ -351,11 +352,11 @@ static int ad9523_io_update(struct iio_dev *indio_dev) } static int ad9523_vco_out_map(struct iio_dev *indio_dev, - unsigned ch, unsigned out) + unsigned int ch, unsigned int out) { struct ad9523_state *st = iio_priv(indio_dev); int ret; - unsigned mask; + unsigned int mask; switch (ch) { case 0 ... 3: @@ -405,7 +406,7 @@ static int ad9523_vco_out_map(struct iio_dev *indio_dev, } static int ad9523_set_clock_provider(struct iio_dev *indio_dev, - unsigned ch, unsigned long freq) + unsigned int ch, unsigned long freq) { struct ad9523_state *st = iio_priv(indio_dev); long tmp1, tmp2; @@ -619,7 +620,7 @@ static int ad9523_read_raw(struct iio_dev *indio_dev, long m) { struct ad9523_state *st = iio_priv(indio_dev); - unsigned code; + unsigned int code; int ret; mutex_lock(&indio_dev->mlock); @@ -655,7 +656,7 @@ static int ad9523_write_raw(struct iio_dev *indio_dev, long mask) { struct ad9523_state *st = iio_priv(indio_dev); - unsigned reg; + unsigned int reg; int ret, tmp, code; mutex_lock(&indio_dev->mlock); @@ -709,8 +710,8 @@ out: } static int ad9523_reg_access(struct iio_dev *indio_dev, - unsigned reg, unsigned writeval, - unsigned *readval) + unsigned int reg, unsigned int writeval, + unsigned int *readval) { int ret; diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index e816d29d6a62..205a84420ae9 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -93,7 +93,7 @@ config IIO_ST_GYRO_3AXIS select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics gyroscopes: - L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330. + L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330, LSM9DS0. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c index dd2f850a2f0b..7ccc044063f6 100644 --- a/drivers/iio/gyro/bmg160_core.c +++ b/drivers/iio/gyro/bmg160_core.c @@ -95,7 +95,6 @@ #define BMG160_AUTO_SUSPEND_DELAY_MS 2000 struct bmg160_data { - struct device *dev; struct regmap *regmap; struct iio_trigger *dready_trig; struct iio_trigger *motion_trig; @@ -137,11 +136,12 @@ static const struct { static int bmg160_set_mode(struct bmg160_data *data, u8 mode) { + struct device *dev = regmap_get_device(data->regmap); int ret; ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode); if (ret < 0) { - dev_err(data->dev, "Error writing reg_pmu_lpw\n"); + dev_err(dev, "Error writing reg_pmu_lpw\n"); return ret; } @@ -162,6 +162,7 @@ static int bmg160_convert_freq_to_bit(int val) static int bmg160_set_bw(struct bmg160_data *data, int val) { + struct device *dev = regmap_get_device(data->regmap); int ret; int bw_bits; @@ -171,7 +172,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits); if (ret < 0) { - dev_err(data->dev, "Error writing reg_pmu_bw\n"); + dev_err(dev, "Error writing reg_pmu_bw\n"); return ret; } @@ -182,18 +183,19 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) static int bmg160_chip_init(struct bmg160_data *data) { + struct device *dev = regmap_get_device(data->regmap); int ret; unsigned int val; ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_chip_id\n"); + dev_err(dev, "Error reading reg_chip_id\n"); return ret; } - dev_dbg(data->dev, "Chip Id %x\n", val); + dev_dbg(dev, "Chip Id %x\n", val); if (val != BMG160_CHIP_ID_VAL) { - dev_err(data->dev, "invalid chip %x\n", val); + dev_err(dev, "invalid chip %x\n", val); return -ENODEV; } @@ -212,14 +214,14 @@ static int bmg160_chip_init(struct bmg160_data *data) /* Set Default Range */ ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS); if (ret < 0) { - dev_err(data->dev, "Error writing reg_range\n"); + dev_err(dev, "Error writing reg_range\n"); return ret; } data->dps_range = BMG160_RANGE_500DPS; ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_slope_thres\n"); + dev_err(dev, "Error reading reg_slope_thres\n"); return ret; } data->slope_thres = val; @@ -228,7 +230,7 @@ static int bmg160_chip_init(struct bmg160_data *data) ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1, BMG160_INT1_BIT_OD, 0); if (ret < 0) { - dev_err(data->dev, "Error updating bits in reg_int_en_1\n"); + dev_err(dev, "Error updating bits in reg_int_en_1\n"); return ret; } @@ -236,7 +238,7 @@ static int bmg160_chip_init(struct bmg160_data *data) BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, + dev_err(dev, "Error writing reg_motion_intr\n"); return ret; } @@ -247,20 +249,21 @@ static int bmg160_chip_init(struct bmg160_data *data) static int bmg160_set_power_state(struct bmg160_data *data, bool on) { #ifdef CONFIG_PM + struct device *dev = regmap_get_device(data->regmap); int ret; if (on) - ret = pm_runtime_get_sync(data->dev); + ret = pm_runtime_get_sync(dev); else { - pm_runtime_mark_last_busy(data->dev); - ret = pm_runtime_put_autosuspend(data->dev); + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); } if (ret < 0) { - dev_err(data->dev, - "Failed: bmg160_set_power_state for %d\n", on); + dev_err(dev, "Failed: bmg160_set_power_state for %d\n", on); + if (on) - pm_runtime_put_noidle(data->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -272,6 +275,7 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on) static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, bool status) { + struct device *dev = regmap_get_device(data->regmap); int ret; /* Enable/Disable INT_MAP0 mapping */ @@ -279,7 +283,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MAP_0_BIT_ANY, (status ? BMG160_INT_MAP_0_BIT_ANY : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating bits reg_int_map0\n"); + dev_err(dev, "Error updating bits reg_int_map0\n"); return ret; } @@ -289,8 +293,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES, data->slope_thres); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_slope_thres\n"); + dev_err(dev, "Error writing reg_slope_thres\n"); return ret; } @@ -298,8 +301,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y | BMG160_INT_MOTION_Z); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_motion_intr\n"); + dev_err(dev, "Error writing reg_motion_intr\n"); return ret; } @@ -314,8 +316,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_rst_latch\n"); + dev_err(dev, "Error writing reg_rst_latch\n"); return ret; } } @@ -328,7 +329,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, } if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_en0\n"); + dev_err(dev, "Error writing reg_int_en0\n"); return ret; } @@ -338,6 +339,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, bool status) { + struct device *dev = regmap_get_device(data->regmap); int ret; /* Enable/Disable INT_MAP1 mapping */ @@ -345,7 +347,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MAP_1_BIT_NEW_DATA, (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0)); if (ret < 0) { - dev_err(data->dev, "Error updating bits in reg_int_map1\n"); + dev_err(dev, "Error updating bits in reg_int_map1\n"); return ret; } @@ -354,9 +356,8 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MODE_NON_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_rst_latch\n"); - return ret; + dev_err(dev, "Error writing reg_rst_latch\n"); + return ret; } ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, @@ -368,16 +369,15 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_rst_latch\n"); - return ret; + dev_err(dev, "Error writing reg_rst_latch\n"); + return ret; } ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0); } if (ret < 0) { - dev_err(data->dev, "Error writing reg_int_en0\n"); + dev_err(dev, "Error writing reg_int_en0\n"); return ret; } @@ -400,6 +400,7 @@ static int bmg160_get_bw(struct bmg160_data *data, int *val) static int bmg160_set_scale(struct bmg160_data *data, int val) { + struct device *dev = regmap_get_device(data->regmap); int ret, i; for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) { @@ -407,8 +408,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) ret = regmap_write(data->regmap, BMG160_REG_RANGE, bmg160_scale_table[i].dps_range); if (ret < 0) { - dev_err(data->dev, - "Error writing reg_range\n"); + dev_err(dev, "Error writing reg_range\n"); return ret; } data->dps_range = bmg160_scale_table[i].dps_range; @@ -421,6 +421,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) static int bmg160_get_temp(struct bmg160_data *data, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; unsigned int raw_val; @@ -433,7 +434,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_temp\n"); + dev_err(dev, "Error reading reg_temp\n"); bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -450,6 +451,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) { + struct device *dev = regmap_get_device(data->regmap); int ret; __le16 raw_val; @@ -463,7 +465,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val, sizeof(raw_val)); if (ret < 0) { - dev_err(data->dev, "Error reading axis %d\n", axis); + dev_err(dev, "Error reading axis %d\n", axis); bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -793,6 +795,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig) { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); struct bmg160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int ret; /* new data interrupts don't need ack */ @@ -804,7 +807,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig) BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(data->dev, "Error writing reg_rst_latch\n"); + dev_err(dev, "Error writing reg_rst_latch\n"); return ret; } @@ -864,13 +867,14 @@ static irqreturn_t bmg160_event_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmg160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); int ret; int dir; unsigned int val; ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val); if (ret < 0) { - dev_err(data->dev, "Error reading reg_int_status2\n"); + dev_err(dev, "Error reading reg_int_status2\n"); goto ack_intr_status; } @@ -907,8 +911,7 @@ ack_intr_status: BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) - dev_err(data->dev, - "Error writing reg_rst_latch\n"); + dev_err(dev, "Error writing reg_rst_latch\n"); } return IRQ_HANDLED; @@ -976,7 +979,6 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq, data = iio_priv(indio_dev); dev_set_drvdata(dev, indio_dev); - data->dev = dev; data->irq = irq; data->regmap = regmap; @@ -1139,7 +1141,7 @@ static int bmg160_runtime_suspend(struct device *dev) ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND); if (ret < 0) { - dev_err(data->dev, "set mode failed\n"); + dev_err(dev, "set mode failed\n"); return -EAGAIN; } diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h index 5353d6328c54..a5c5c4e29add 100644 --- a/drivers/iio/gyro/st_gyro.h +++ b/drivers/iio/gyro/st_gyro.h @@ -21,6 +21,7 @@ #define L3GD20_GYRO_DEV_NAME "l3gd20" #define L3G4IS_GYRO_DEV_NAME "l3g4is_ui" #define LSM330_GYRO_DEV_NAME "lsm330_gyro" +#define LSM9DS0_GYRO_DEV_NAME "lsm9ds0_gyro" /** * struct st_sensors_platform_data - gyro platform data diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 110f95b6e52f..52a3c87c375c 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -190,6 +190,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, .bootime = 2, @@ -203,6 +204,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { [2] = LSM330DLC_GYRO_DEV_NAME, [3] = L3G4IS_GYRO_DEV_NAME, [4] = LSM330_GYRO_DEV_NAME, + [5] = LSM9DS0_GYRO_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_gyro_16bit_channels, .odr = { @@ -258,6 +260,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, .bootime = 2, @@ -322,6 +325,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { * drain settings, but only for INT1 and not * for the DRDY line on INT2. */ + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c index 6848451f817a..40056b821036 100644 --- a/drivers/iio/gyro/st_gyro_i2c.c +++ b/drivers/iio/gyro/st_gyro_i2c.c @@ -48,6 +48,10 @@ static const struct of_device_id st_gyro_of_match[] = { .compatible = "st,lsm330-gyro", .data = LSM330_GYRO_DEV_NAME, }, + { + .compatible = "st,lsm9ds0-gyro", + .data = LSM9DS0_GYRO_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_gyro_of_match); @@ -93,6 +97,7 @@ static const struct i2c_device_id st_gyro_id_table[] = { { L3GD20_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME }, + { LSM9DS0_GYRO_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_gyro_id_table); diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c index d2b7a5fa344c..fbf2faed501c 100644 --- a/drivers/iio/gyro/st_gyro_spi.c +++ b/drivers/iio/gyro/st_gyro_spi.c @@ -54,6 +54,7 @@ static const struct spi_device_id st_gyro_id_table[] = { { L3GD20_GYRO_DEV_NAME }, { L3G4IS_GYRO_DEV_NAME }, { LSM330_GYRO_DEV_NAME }, + { LSM9DS0_GYRO_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_gyro_id_table); diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 866dda133336..738a86d9e4a9 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -3,6 +3,16 @@ # menu "Humidity sensors" +config AM2315 + tristate "Aosong AM2315 relative humidity and temperature sensor" + depends on I2C + help + If you say yes here you get support for the Aosong AM2315 + relative humidity and ambient temperature sensor. + + This driver can also be built as a module. If so, the module will + be called am2315. + config DHT11 tristate "DHT11 (and compatible sensors) driver" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile index c9f089a9a6b8..4a73442fcd9c 100644 --- a/drivers/iio/humidity/Makefile +++ b/drivers/iio/humidity/Makefile @@ -2,6 +2,7 @@ # Makefile for IIO humidity sensor drivers # +obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HTU21) += htu21.o diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c new file mode 100644 index 000000000000..3be6d209a159 --- /dev/null +++ b/drivers/iio/humidity/am2315.c @@ -0,0 +1,303 @@ +/** + * Aosong AM2315 relative humidity and temperature + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * 7-bit I2C address: 0x5C. + */ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define AM2315_REG_HUM_MSB 0x00 +#define AM2315_REG_HUM_LSB 0x01 +#define AM2315_REG_TEMP_MSB 0x02 +#define AM2315_REG_TEMP_LSB 0x03 + +#define AM2315_FUNCTION_READ 0x03 +#define AM2315_HUM_OFFSET 2 +#define AM2315_TEMP_OFFSET 4 +#define AM2315_ALL_CHANNEL_MASK GENMASK(1, 0) + +#define AM2315_DRIVER_NAME "am2315" + +struct am2315_data { + struct i2c_client *client; + struct mutex lock; + s16 buffer[8]; /* 2x16-bit channels + 2x16 padding + 4x16 timestamp */ +}; + +struct am2315_sensor_data { + s16 hum_data; + s16 temp_data; +}; + +static const struct iio_chan_spec am2315_channels[] = { + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +/* CRC calculation algorithm, as specified in the datasheet (page 13). */ +static u16 am2315_crc(u8 *data, u8 nr_bytes) +{ + int i; + u16 crc = 0xffff; + + while (nr_bytes--) { + crc ^= *data++; + for (i = 0; i < 8; i++) { + if (crc & 0x01) { + crc >>= 1; + crc ^= 0xA001; + } else { + crc >>= 1; + } + } + } + + return crc; +} + +/* Simple function that sends a few bytes to the device to wake it up. */ +static void am2315_ping(struct i2c_client *client) +{ + i2c_smbus_read_byte_data(client, AM2315_REG_HUM_MSB); +} + +static int am2315_read_data(struct am2315_data *data, + struct am2315_sensor_data *sensor_data) +{ + int ret; + /* tx_buf format: <function code> <start addr> <nr of regs to read> */ + u8 tx_buf[3] = { AM2315_FUNCTION_READ, AM2315_REG_HUM_MSB, 4 }; + /* + * rx_buf format: + * <function code> <number of registers read> + * <humidity MSB> <humidity LSB> <temp MSB> <temp LSB> + * <CRC LSB> <CRC MSB> + */ + u8 rx_buf[8]; + u16 crc; + + /* First wake up the device. */ + am2315_ping(data->client); + + mutex_lock(&data->lock); + ret = i2c_master_send(data->client, tx_buf, sizeof(tx_buf)); + if (ret < 0) { + dev_err(&data->client->dev, "failed to send read request\n"); + goto exit_unlock; + } + /* Wait 2-3 ms, then read back the data sent by the device. */ + usleep_range(2000, 3000); + /* Do a bulk data read, then pick out what we need. */ + ret = i2c_master_recv(data->client, rx_buf, sizeof(rx_buf)); + if (ret < 0) { + dev_err(&data->client->dev, "failed to read sensor data\n"); + goto exit_unlock; + } + mutex_unlock(&data->lock); + /* + * Do a CRC check on the data and compare it to the value + * calculated by the device. + */ + crc = am2315_crc(rx_buf, sizeof(rx_buf) - 2); + if ((crc & 0xff) != rx_buf[6] || (crc >> 8) != rx_buf[7]) { + dev_err(&data->client->dev, "failed to verify sensor data\n"); + return -EIO; + } + + sensor_data->hum_data = (rx_buf[AM2315_HUM_OFFSET] << 8) | + rx_buf[AM2315_HUM_OFFSET + 1]; + sensor_data->temp_data = (rx_buf[AM2315_TEMP_OFFSET] << 8) | + rx_buf[AM2315_TEMP_OFFSET + 1]; + + return ret; + +exit_unlock: + mutex_unlock(&data->lock); + return ret; +} + +static irqreturn_t am2315_trigger_handler(int irq, void *p) +{ + int i; + int ret; + int bit; + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct am2315_data *data = iio_priv(indio_dev); + struct am2315_sensor_data sensor_data; + + ret = am2315_read_data(data, &sensor_data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto err; + } + + mutex_lock(&data->lock); + if (*(indio_dev->active_scan_mask) == AM2315_ALL_CHANNEL_MASK) { + data->buffer[0] = sensor_data.hum_data; + data->buffer[1] = sensor_data.temp_data; + } else { + i = 0; + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + data->buffer[i] = (bit ? sensor_data.temp_data : + sensor_data.hum_data); + i++; + } + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int am2315_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct am2315_sensor_data sensor_data; + struct am2315_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = am2315_read_data(data, &sensor_data); + if (ret < 0) + return ret; + *val = (chan->type == IIO_HUMIDITYRELATIVE) ? + sensor_data.hum_data : sensor_data.temp_data; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 100; + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static const struct iio_info am2315_info = { + .driver_module = THIS_MODULE, + .read_raw = am2315_read_raw, +}; + +static int am2315_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct am2315_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&client->dev, "iio allocation failed!\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->client = client; + i2c_set_clientdata(client, indio_dev); + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &am2315_info; + indio_dev->name = AM2315_DRIVER_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = am2315_channels; + indio_dev->num_channels = ARRAY_SIZE(am2315_channels); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + am2315_trigger_handler, NULL); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto err_buffer_cleanup; + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + return ret; +} + +static int am2315_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} + +static const struct i2c_device_id am2315_i2c_id[] = { + {"am2315", 0}, + {} +}; + +static const struct acpi_device_id am2315_acpi_id[] = { + {"AOS2315", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, am2315_acpi_id); + +static struct i2c_driver am2315_driver = { + .driver = { + .name = "am2315", + .acpi_match_table = ACPI_PTR(am2315_acpi_id), + }, + .probe = am2315_probe, + .remove = am2315_remove, + .id_table = am2315_i2c_id, +}; + +module_i2c_driver(am2315_driver); + +MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>"); +MODULE_DESCRIPTION("Aosong AM2315 relative humidity and temperature"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 20b500da94db..9c47bc98f3ac 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -96,6 +96,24 @@ struct dht11 { struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ]; }; +#ifdef CONFIG_DYNAMIC_DEBUG +/* + * dht11_edges_print: show the data as actually received by the + * driver. + */ +static void dht11_edges_print(struct dht11 *dht11) +{ + int i; + + dev_dbg(dht11->dev, "%d edges detected:\n", dht11->num_edges); + for (i = 1; i < dht11->num_edges; ++i) { + dev_dbg(dht11->dev, "%d: %lld ns %s\n", i, + dht11->edges[i].ts - dht11->edges[i - 1].ts, + dht11->edges[i - 1].value ? "high" : "low"); + } +} +#endif /* CONFIG_DYNAMIC_DEBUG */ + static unsigned char dht11_decode_byte(char *bits) { unsigned char ret = 0; @@ -119,8 +137,12 @@ static int dht11_decode(struct dht11 *dht11, int offset) for (i = 0; i < DHT11_BITS_PER_READ; ++i) { t = dht11->edges[offset + 2 * i + 2].ts - dht11->edges[offset + 2 * i + 1].ts; - if (!dht11->edges[offset + 2 * i + 1].value) - return -EIO; /* lost synchronisation */ + if (!dht11->edges[offset + 2 * i + 1].value) { + dev_dbg(dht11->dev, + "lost synchronisation at edge %d\n", + offset + 2 * i + 1); + return -EIO; + } bits[i] = t > DHT11_THRESHOLD; } @@ -130,8 +152,10 @@ static int dht11_decode(struct dht11 *dht11, int offset) temp_dec = dht11_decode_byte(&bits[24]); checksum = dht11_decode_byte(&bits[32]); - if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) + if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) { + dev_dbg(dht11->dev, "invalid checksum\n"); return -EIO; + } dht11->timestamp = ktime_get_boot_ns(); if (hum_int < 20) { /* DHT22 */ @@ -182,6 +206,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev, mutex_lock(&dht11->lock); if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) { timeres = ktime_get_resolution_ns(); + dev_dbg(dht11->dev, "current timeresolution: %dns\n", timeres); if (timeres > DHT11_MIN_TIMERES) { dev_err(dht11->dev, "timeresolution %dns too low\n", timeres); @@ -219,10 +244,13 @@ static int dht11_read_raw(struct iio_dev *iio_dev, free_irq(dht11->irq, iio_dev); +#ifdef CONFIG_DYNAMIC_DEBUG + dht11_edges_print(dht11); +#endif + if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) { - dev_err(&iio_dev->dev, - "Only %d signal edges detected\n", - dht11->num_edges); + dev_err(dht11->dev, "Only %d signal edges detected\n", + dht11->num_edges); ret = -ETIMEDOUT; } if (ret < 0) diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 5e610f7de5aa..1f1ad41ef881 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -25,6 +25,8 @@ config ADIS16480 Say yes here to build support for Analog Devices ADIS16375, ADIS16480, ADIS16485, ADIS16488 inertial sensors. +source "drivers/iio/imu/bmi160/Kconfig" + config KMX61 tristate "Kionix KMX61 6-axis accelerometer and magnetometer" depends on I2C diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index e1e6e3d70e26..c71bcd30dc38 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -13,6 +13,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o +obj-y += bmi160/ obj-y += inv_mpu6050/ obj-$(CONFIG_KMX61) += kmx61.o diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c index 911255d41c1a..ad6f91d06185 100644 --- a/drivers/iio/imu/adis.c +++ b/drivers/iio/imu/adis.c @@ -324,7 +324,12 @@ static int adis_self_test(struct adis *adis) msleep(adis->data->startup_delay); - return adis_check_status(adis); + ret = adis_check_status(adis); + + if (adis->data->self_test_no_autoclear) + adis_write_reg_16(adis, adis->data->msc_ctrl_reg, 0x00); + + return ret; } /** diff --git a/drivers/iio/imu/bmi160/Kconfig b/drivers/iio/imu/bmi160/Kconfig new file mode 100644 index 000000000000..005c17ccc2b0 --- /dev/null +++ b/drivers/iio/imu/bmi160/Kconfig @@ -0,0 +1,32 @@ +# +# BMI160 IMU driver +# + +config BMI160 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config BMI160_I2C + tristate "Bosch BMI160 I2C driver" + depends on I2C + select BMI160 + select REGMAP_I2C + help + If you say yes here you get support for BMI160 IMU on I2C with + accelerometer, gyroscope and external BMG160 magnetometer. + + This driver can also be built as a module. If so, the module will be + called bmi160_i2c. + +config BMI160_SPI + tristate "Bosch BMI160 SPI driver" + depends on SPI + select BMI160 + select REGMAP_SPI + help + If you say yes here you get support for BMI160 IMU on SPI with + accelerometer, gyroscope and external BMG160 magnetometer. + + This driver can also be built as a module. If so, the module will be + called bmi160_spi. diff --git a/drivers/iio/imu/bmi160/Makefile b/drivers/iio/imu/bmi160/Makefile new file mode 100644 index 000000000000..10365e493ae2 --- /dev/null +++ b/drivers/iio/imu/bmi160/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Bosch BMI160 IMU +# +obj-$(CONFIG_BMI160) += bmi160_core.o +obj-$(CONFIG_BMI160_I2C) += bmi160_i2c.o +obj-$(CONFIG_BMI160_SPI) += bmi160_spi.o diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h new file mode 100644 index 000000000000..d2ae6ed70271 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160.h @@ -0,0 +1,10 @@ +#ifndef BMI160_H_ +#define BMI160_H_ + +extern const struct regmap_config bmi160_regmap_config; + +int bmi160_core_probe(struct device *dev, struct regmap *regmap, + const char *name, bool use_spi); +void bmi160_core_remove(struct device *dev); + +#endif /* BMI160_H_ */ diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c new file mode 100644 index 000000000000..0bf92b06d7d8 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -0,0 +1,596 @@ +/* + * BMI160 - Bosch IMU (accel, gyro plus external magnetometer) + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO core driver for BMI160, with support for I2C/SPI busses + * + * TODO: magnetometer, interrupts, hardware FIFO + */ +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/acpi.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> + +#include "bmi160.h" + +#define BMI160_REG_CHIP_ID 0x00 +#define BMI160_CHIP_ID_VAL 0xD1 + +#define BMI160_REG_PMU_STATUS 0x03 + +/* X axis data low byte address, the rest can be obtained using axis offset */ +#define BMI160_REG_DATA_MAGN_XOUT_L 0x04 +#define BMI160_REG_DATA_GYRO_XOUT_L 0x0C +#define BMI160_REG_DATA_ACCEL_XOUT_L 0x12 + +#define BMI160_REG_ACCEL_CONFIG 0x40 +#define BMI160_ACCEL_CONFIG_ODR_MASK GENMASK(3, 0) +#define BMI160_ACCEL_CONFIG_BWP_MASK GENMASK(6, 4) + +#define BMI160_REG_ACCEL_RANGE 0x41 +#define BMI160_ACCEL_RANGE_2G 0x03 +#define BMI160_ACCEL_RANGE_4G 0x05 +#define BMI160_ACCEL_RANGE_8G 0x08 +#define BMI160_ACCEL_RANGE_16G 0x0C + +#define BMI160_REG_GYRO_CONFIG 0x42 +#define BMI160_GYRO_CONFIG_ODR_MASK GENMASK(3, 0) +#define BMI160_GYRO_CONFIG_BWP_MASK GENMASK(5, 4) + +#define BMI160_REG_GYRO_RANGE 0x43 +#define BMI160_GYRO_RANGE_2000DPS 0x00 +#define BMI160_GYRO_RANGE_1000DPS 0x01 +#define BMI160_GYRO_RANGE_500DPS 0x02 +#define BMI160_GYRO_RANGE_250DPS 0x03 +#define BMI160_GYRO_RANGE_125DPS 0x04 + +#define BMI160_REG_CMD 0x7E +#define BMI160_CMD_ACCEL_PM_SUSPEND 0x10 +#define BMI160_CMD_ACCEL_PM_NORMAL 0x11 +#define BMI160_CMD_ACCEL_PM_LOW_POWER 0x12 +#define BMI160_CMD_GYRO_PM_SUSPEND 0x14 +#define BMI160_CMD_GYRO_PM_NORMAL 0x15 +#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17 +#define BMI160_CMD_SOFTRESET 0xB6 + +#define BMI160_REG_DUMMY 0x7F + +#define BMI160_ACCEL_PMU_MIN_USLEEP 3200 +#define BMI160_ACCEL_PMU_MAX_USLEEP 3800 +#define BMI160_GYRO_PMU_MIN_USLEEP 55000 +#define BMI160_GYRO_PMU_MAX_USLEEP 80000 +#define BMI160_SOFTRESET_USLEEP 1000 + +#define BMI160_CHANNEL(_type, _axis, _index) { \ + .type = _type, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + +/* scan indexes follow DATA register order */ +enum bmi160_scan_axis { + BMI160_SCAN_EXT_MAGN_X = 0, + BMI160_SCAN_EXT_MAGN_Y, + BMI160_SCAN_EXT_MAGN_Z, + BMI160_SCAN_RHALL, + BMI160_SCAN_GYRO_X, + BMI160_SCAN_GYRO_Y, + BMI160_SCAN_GYRO_Z, + BMI160_SCAN_ACCEL_X, + BMI160_SCAN_ACCEL_Y, + BMI160_SCAN_ACCEL_Z, + BMI160_SCAN_TIMESTAMP, +}; + +enum bmi160_sensor_type { + BMI160_ACCEL = 0, + BMI160_GYRO, + BMI160_EXT_MAGN, + BMI160_NUM_SENSORS /* must be last */ +}; + +struct bmi160_data { + struct regmap *regmap; +}; + +const struct regmap_config bmi160_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; +EXPORT_SYMBOL(bmi160_regmap_config); + +struct bmi160_regs { + u8 data; /* LSB byte register for X-axis */ + u8 config; + u8 config_odr_mask; + u8 config_bwp_mask; + u8 range; + u8 pmu_cmd_normal; + u8 pmu_cmd_suspend; +}; + +static struct bmi160_regs bmi160_regs[] = { + [BMI160_ACCEL] = { + .data = BMI160_REG_DATA_ACCEL_XOUT_L, + .config = BMI160_REG_ACCEL_CONFIG, + .config_odr_mask = BMI160_ACCEL_CONFIG_ODR_MASK, + .config_bwp_mask = BMI160_ACCEL_CONFIG_BWP_MASK, + .range = BMI160_REG_ACCEL_RANGE, + .pmu_cmd_normal = BMI160_CMD_ACCEL_PM_NORMAL, + .pmu_cmd_suspend = BMI160_CMD_ACCEL_PM_SUSPEND, + }, + [BMI160_GYRO] = { + .data = BMI160_REG_DATA_GYRO_XOUT_L, + .config = BMI160_REG_GYRO_CONFIG, + .config_odr_mask = BMI160_GYRO_CONFIG_ODR_MASK, + .config_bwp_mask = BMI160_GYRO_CONFIG_BWP_MASK, + .range = BMI160_REG_GYRO_RANGE, + .pmu_cmd_normal = BMI160_CMD_GYRO_PM_NORMAL, + .pmu_cmd_suspend = BMI160_CMD_GYRO_PM_SUSPEND, + }, +}; + +struct bmi160_pmu_time { + unsigned long min; + unsigned long max; +}; + +static struct bmi160_pmu_time bmi160_pmu_time[] = { + [BMI160_ACCEL] = { + .min = BMI160_ACCEL_PMU_MIN_USLEEP, + .max = BMI160_ACCEL_PMU_MAX_USLEEP + }, + [BMI160_GYRO] = { + .min = BMI160_GYRO_PMU_MIN_USLEEP, + .max = BMI160_GYRO_PMU_MIN_USLEEP, + }, +}; + +struct bmi160_scale { + u8 bits; + int uscale; +}; + +struct bmi160_odr { + u8 bits; + int odr; + int uodr; +}; + +static const struct bmi160_scale bmi160_accel_scale[] = { + { BMI160_ACCEL_RANGE_2G, 598}, + { BMI160_ACCEL_RANGE_4G, 1197}, + { BMI160_ACCEL_RANGE_8G, 2394}, + { BMI160_ACCEL_RANGE_16G, 4788}, +}; + +static const struct bmi160_scale bmi160_gyro_scale[] = { + { BMI160_GYRO_RANGE_2000DPS, 1065}, + { BMI160_GYRO_RANGE_1000DPS, 532}, + { BMI160_GYRO_RANGE_500DPS, 266}, + { BMI160_GYRO_RANGE_250DPS, 133}, + { BMI160_GYRO_RANGE_125DPS, 66}, +}; + +struct bmi160_scale_item { + const struct bmi160_scale *tbl; + int num; +}; + +static const struct bmi160_scale_item bmi160_scale_table[] = { + [BMI160_ACCEL] = { + .tbl = bmi160_accel_scale, + .num = ARRAY_SIZE(bmi160_accel_scale), + }, + [BMI160_GYRO] = { + .tbl = bmi160_gyro_scale, + .num = ARRAY_SIZE(bmi160_gyro_scale), + }, +}; + +static const struct bmi160_odr bmi160_accel_odr[] = { + {0x01, 0, 78125}, + {0x02, 1, 5625}, + {0x03, 3, 125}, + {0x04, 6, 25}, + {0x05, 12, 5}, + {0x06, 25, 0}, + {0x07, 50, 0}, + {0x08, 100, 0}, + {0x09, 200, 0}, + {0x0A, 400, 0}, + {0x0B, 800, 0}, + {0x0C, 1600, 0}, +}; + +static const struct bmi160_odr bmi160_gyro_odr[] = { + {0x06, 25, 0}, + {0x07, 50, 0}, + {0x08, 100, 0}, + {0x09, 200, 0}, + {0x0A, 400, 0}, + {0x0B, 8000, 0}, + {0x0C, 1600, 0}, + {0x0D, 3200, 0}, +}; + +struct bmi160_odr_item { + const struct bmi160_odr *tbl; + int num; +}; + +static const struct bmi160_odr_item bmi160_odr_table[] = { + [BMI160_ACCEL] = { + .tbl = bmi160_accel_odr, + .num = ARRAY_SIZE(bmi160_accel_odr), + }, + [BMI160_GYRO] = { + .tbl = bmi160_gyro_odr, + .num = ARRAY_SIZE(bmi160_gyro_odr), + }, +}; + +static const struct iio_chan_spec bmi160_channels[] = { + BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X), + BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y), + BMI160_CHANNEL(IIO_ACCEL, Z, BMI160_SCAN_ACCEL_Z), + BMI160_CHANNEL(IIO_ANGL_VEL, X, BMI160_SCAN_GYRO_X), + BMI160_CHANNEL(IIO_ANGL_VEL, Y, BMI160_SCAN_GYRO_Y), + BMI160_CHANNEL(IIO_ANGL_VEL, Z, BMI160_SCAN_GYRO_Z), + IIO_CHAN_SOFT_TIMESTAMP(BMI160_SCAN_TIMESTAMP), +}; + +static enum bmi160_sensor_type bmi160_to_sensor(enum iio_chan_type iio_type) +{ + switch (iio_type) { + case IIO_ACCEL: + return BMI160_ACCEL; + case IIO_ANGL_VEL: + return BMI160_GYRO; + default: + return -EINVAL; + } +} + +static +int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t, + bool mode) +{ + int ret; + u8 cmd; + + if (mode) + cmd = bmi160_regs[t].pmu_cmd_normal; + else + cmd = bmi160_regs[t].pmu_cmd_suspend; + + ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd); + if (ret < 0) + return ret; + + usleep_range(bmi160_pmu_time[t].min, bmi160_pmu_time[t].max); + + return 0; +} + +static +int bmi160_set_scale(struct bmi160_data *data, enum bmi160_sensor_type t, + int uscale) +{ + int i; + + for (i = 0; i < bmi160_scale_table[t].num; i++) + if (bmi160_scale_table[t].tbl[i].uscale == uscale) + break; + + if (i == bmi160_scale_table[t].num) + return -EINVAL; + + return regmap_write(data->regmap, bmi160_regs[t].range, + bmi160_scale_table[t].tbl[i].bits); +} + +static +int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t, + int *uscale) +{ + int i, ret, val; + + ret = regmap_read(data->regmap, bmi160_regs[t].range, &val); + if (ret < 0) + return ret; + + for (i = 0; i < bmi160_scale_table[t].num; i++) + if (bmi160_scale_table[t].tbl[i].bits == val) { + *uscale = bmi160_scale_table[t].tbl[i].uscale; + return 0; + } + + return -EINVAL; +} + +static int bmi160_get_data(struct bmi160_data *data, int chan_type, + int axis, int *val) +{ + u8 reg; + int ret; + __le16 sample; + enum bmi160_sensor_type t = bmi160_to_sensor(chan_type); + + reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(__le16); + + ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(__le16)); + if (ret < 0) + return ret; + + *val = sign_extend32(le16_to_cpu(sample), 15); + + return 0; +} + +static +int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t, + int odr, int uodr) +{ + int i; + + for (i = 0; i < bmi160_odr_table[t].num; i++) + if (bmi160_odr_table[t].tbl[i].odr == odr && + bmi160_odr_table[t].tbl[i].uodr == uodr) + break; + + if (i >= bmi160_odr_table[t].num) + return -EINVAL; + + return regmap_update_bits(data->regmap, + bmi160_regs[t].config, + bmi160_odr_table[t].tbl[i].bits, + bmi160_regs[t].config_odr_mask); +} + +static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, + int *odr, int *uodr) +{ + int i, val, ret; + + ret = regmap_read(data->regmap, bmi160_regs[t].config, &val); + if (ret < 0) + return ret; + + val &= bmi160_regs[t].config_odr_mask; + + for (i = 0; i < bmi160_odr_table[t].num; i++) + if (val == bmi160_odr_table[t].tbl[i].bits) + break; + + if (i >= bmi160_odr_table[t].num) + return -EINVAL; + + *odr = bmi160_odr_table[t].tbl[i].odr; + *uodr = bmi160_odr_table[t].tbl[i].uodr; + + return 0; +} + +static irqreturn_t bmi160_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmi160_data *data = iio_priv(indio_dev); + s16 buf[16]; /* 3 sens x 3 axis x s16 + 3 x s16 pad + 4 x s16 tstamp */ + int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L; + __le16 sample; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = regmap_bulk_read(data->regmap, base + i * sizeof(__le16), + &sample, sizeof(__le16)); + if (ret < 0) + goto done; + buf[j++] = sample; + } + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); +done: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int bmi160_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + struct bmi160_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = bmi160_get_data(data, chan->type, chan->channel2, val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + ret = bmi160_get_scale(data, + bmi160_to_sensor(chan->type), val2); + return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type), + val, val2); + return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + + return 0; +} + +static int bmi160_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bmi160_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return bmi160_set_scale(data, + bmi160_to_sensor(chan->type), val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + return bmi160_set_odr(data, bmi160_to_sensor(chan->type), + val, val2); + default: + return -EINVAL; + } + + return 0; +} + +static const struct iio_info bmi160_info = { + .driver_module = THIS_MODULE, + .read_raw = bmi160_read_raw, + .write_raw = bmi160_write_raw, +}; + +static const char *bmi160_match_acpi_device(struct device *dev) +{ + const struct acpi_device_id *id; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!id) + return NULL; + + return dev_name(dev); +} + +static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) +{ + int ret; + unsigned int val; + struct device *dev = regmap_get_device(data->regmap); + + ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); + if (ret < 0) + return ret; + + usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1); + + /* + * CS rising edge is needed before starting SPI, so do a dummy read + * See Section 3.2.1, page 86 of the datasheet + */ + if (use_spi) { + ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); + if (ret < 0) + return ret; + } + + ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); + if (ret < 0) { + dev_err(dev, "Error reading chip id\n"); + return ret; + } + if (val != BMI160_CHIP_ID_VAL) { + dev_err(dev, "Wrong chip id, got %x expected %x\n", + val, BMI160_CHIP_ID_VAL); + return -ENODEV; + } + + ret = bmi160_set_mode(data, BMI160_ACCEL, true); + if (ret < 0) + return ret; + + ret = bmi160_set_mode(data, BMI160_GYRO, true); + if (ret < 0) + return ret; + + return 0; +} + +static void bmi160_chip_uninit(struct bmi160_data *data) +{ + bmi160_set_mode(data, BMI160_GYRO, false); + bmi160_set_mode(data, BMI160_ACCEL, false); +} + +int bmi160_core_probe(struct device *dev, struct regmap *regmap, + const char *name, bool use_spi) +{ + struct iio_dev *indio_dev; + struct bmi160_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + + ret = bmi160_chip_init(data, use_spi); + if (ret < 0) + return ret; + + if (!name && ACPI_HANDLE(dev)) + name = bmi160_match_acpi_device(dev); + + indio_dev->dev.parent = dev; + indio_dev->channels = bmi160_channels; + indio_dev->num_channels = ARRAY_SIZE(bmi160_channels); + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &bmi160_info; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + bmi160_trigger_handler, NULL); + if (ret < 0) + goto uninit; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + + return 0; +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +uninit: + bmi160_chip_uninit(data); + return ret; +} +EXPORT_SYMBOL_GPL(bmi160_core_probe); + +void bmi160_core_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmi160_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + bmi160_chip_uninit(data); +} +EXPORT_SYMBOL_GPL(bmi160_core_remove); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("Bosch BMI160 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c new file mode 100644 index 000000000000..07a179d8fb48 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c @@ -0,0 +1,72 @@ +/* + * BMI160 - Bosch IMU, I2C bits + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * 7-bit I2C slave address is: + * - 0x68 if SDO is pulled to GND + * - 0x69 if SDO is pulled to VDDIO + */ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/acpi.h> + +#include "bmi160.h" + +static int bmi160_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bmi160_core_probe(&client->dev, regmap, name, false); +} + +static int bmi160_i2c_remove(struct i2c_client *client) +{ + bmi160_core_remove(&client->dev); + + return 0; +} + +static const struct i2c_device_id bmi160_i2c_id[] = { + {"bmi160", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, bmi160_i2c_id); + +static const struct acpi_device_id bmi160_acpi_match[] = { + {"BMI0160", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match); + +static struct i2c_driver bmi160_i2c_driver = { + .driver = { + .name = "bmi160_i2c", + .acpi_match_table = ACPI_PTR(bmi160_acpi_match), + }, + .probe = bmi160_i2c_probe, + .remove = bmi160_i2c_remove, + .id_table = bmi160_i2c_id, +}; +module_i2c_driver(bmi160_i2c_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("BMI160 I2C driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c new file mode 100644 index 000000000000..1ec8b12bd984 --- /dev/null +++ b/drivers/iio/imu/bmi160/bmi160_spi.c @@ -0,0 +1,63 @@ +/* + * BMI160 - Bosch IMU, SPI bits + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> +#include <linux/acpi.h> + +#include "bmi160.h" + +static int bmi160_spi_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + + regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + return bmi160_core_probe(&spi->dev, regmap, id->name, true); +} + +static int bmi160_spi_remove(struct spi_device *spi) +{ + bmi160_core_remove(&spi->dev); + + return 0; +} + +static const struct spi_device_id bmi160_spi_id[] = { + {"bmi160", 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, bmi160_spi_id); + +static const struct acpi_device_id bmi160_acpi_match[] = { + {"BMI0160", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match); + +static struct spi_driver bmi160_spi_driver = { + .probe = bmi160_spi_probe, + .remove = bmi160_spi_remove, + .id_table = bmi160_spi_id, + .driver = { + .acpi_match_table = ACPI_PTR(bmi160_acpi_match), + .name = "bmi160_spi", + }, +}; +module_spi_driver(bmi160_spi_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("Bosch BMI160 SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 847455a2d6bb..f756feecfa4c 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -13,10 +13,8 @@ config INV_MPU6050_I2C select INV_MPU6050_IIO select REGMAP_I2C help - This driver supports the Invensense MPU6050 devices. - This driver can also support MPU6500 in MPU6050 compatibility mode - and also in MPU6500 mode with some limitations. - It is a gyroscope/accelerometer combo device. + This driver supports the Invensense MPU6050/6500/9150 motion tracking + devices over I2C. This driver can be built as a module. The module will be called inv-mpu6050-i2c. @@ -26,7 +24,7 @@ config INV_MPU6050_SPI select INV_MPU6050_IIO select REGMAP_SPI help - This driver supports the Invensense MPU6050 devices. - It is a gyroscope/accelerometer combo device. + This driver supports the Invensense MPU6000/6500/9150 motion tracking + devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index d192953e9a38..b269b375ca34 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -88,16 +88,29 @@ static const struct inv_mpu6050_chip_config chip_config_6050 = { .accl_fs = INV_MPU6050_FS_02G, }; +/* Indexed by enum inv_devices */ static const struct inv_mpu6050_hw hw_info[] = { { - .num_reg = 117, + .whoami = INV_MPU6050_WHOAMI_VALUE, + .name = "MPU6050", + .reg = ®_set_6050, + .config = &chip_config_6050, + }, + { + .whoami = INV_MPU6500_WHOAMI_VALUE, .name = "MPU6500", .reg = ®_set_6500, .config = &chip_config_6050, }, { - .num_reg = 117, - .name = "MPU6050", + .whoami = INV_MPU6000_WHOAMI_VALUE, + .name = "MPU6000", + .reg = ®_set_6050, + .config = &chip_config_6050, + }, + { + .whoami = INV_MPU9150_WHOAMI_VALUE, + .name = "MPU9150", .reg = ®_set_6050, .config = &chip_config_6050, }, @@ -600,6 +613,10 @@ inv_fifo_rate_show(struct device *dev, struct device_attribute *attr, /** * inv_attr_show() - calling this function will show current * parameters. + * + * Deprecated in favor of IIO mounting matrix API. + * + * See inv_get_mount_matrix() */ static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -644,6 +661,18 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, return 0; } +static const struct iio_mount_matrix * +inv_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + return &((struct inv_mpu6050_state *)iio_priv(indio_dev))->orientation; +} + +static const struct iio_chan_spec_ext_info inv_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, inv_get_mount_matrix), + { }, +}; + #define INV_MPU6050_CHAN(_type, _channel2, _index) \ { \ .type = _type, \ @@ -660,6 +689,7 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, .shift = 0, \ .endianness = IIO_BE, \ }, \ + .ext_info = inv_ext_info, \ } static const struct iio_chan_spec inv_mpu_channels[] = { @@ -692,14 +722,16 @@ static IIO_CONST_ATTR(in_accel_scale_available, "0.000598 0.001196 0.002392 0.004785"); static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show, inv_mpu6050_fifo_rate_store); + +/* Deprecated: kept for userspace backward compatibility. */ static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL, ATTR_GYRO_MATRIX); static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL, ATTR_ACCL_MATRIX); static struct attribute *inv_attributes[] = { - &iio_dev_attr_in_gyro_matrix.dev_attr.attr, - &iio_dev_attr_in_accel_matrix.dev_attr.attr, + &iio_dev_attr_in_gyro_matrix.dev_attr.attr, /* deprecated */ + &iio_dev_attr_in_accel_matrix.dev_attr.attr, /* deprecated */ &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_const_attr_sampling_frequency_available.dev_attr.attr, &iio_const_attr_in_accel_scale_available.dev_attr.attr, @@ -726,6 +758,7 @@ static const struct iio_info mpu_info = { static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) { int result; + unsigned int regval; st->hw = &hw_info[st->chip_type]; st->reg = hw_info[st->chip_type].reg; @@ -736,6 +769,17 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) if (result) return result; msleep(INV_MPU6050_POWER_UP_TIME); + + /* check chip self-identification */ + result = regmap_read(st->map, INV_MPU6050_REG_WHOAMI, ®val); + if (result) + return result; + if (regval != st->hw->whoami) { + dev_warn(regmap_get_device(st->map), + "whoami mismatch got %#02x expected %#02hhx for %s\n", + regval, st->hw->whoami, st->hw->name); + } + /* * toggle power state. After reset, the sleep bit could be on * or off depending on the OTP settings. Toggling power would @@ -774,14 +818,31 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, if (!indio_dev) return -ENOMEM; + BUILD_BUG_ON(ARRAY_SIZE(hw_info) != INV_NUM_PARTS); + if (chip_type < 0 || chip_type >= INV_NUM_PARTS) { + dev_err(dev, "Bad invensense chip_type=%d name=%s\n", + chip_type, name); + return -ENODEV; + } st = iio_priv(indio_dev); st->chip_type = chip_type; st->powerup_count = 0; st->irq = irq; st->map = regmap; + pdata = dev_get_platdata(dev); - if (pdata) + if (!pdata) { + result = of_iio_read_mount_matrix(dev, "mount-matrix", + &st->orientation); + if (result) { + dev_err(dev, "Failed to retrieve mounting matrix %d\n", + result); + return result; + } + } else { st->plat_data = *pdata; + } + /* power is turned on inside check chip type*/ result = inv_check_and_setup_chip(st); if (result) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index 5ee4e0dc093e..1a424a6561de 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -202,13 +202,14 @@ static int inv_mpu_remove(struct i2c_client *client) static const struct i2c_device_id inv_mpu_id[] = { {"mpu6050", INV_MPU6050}, {"mpu6500", INV_MPU6500}, + {"mpu9150", INV_MPU9150}, {} }; MODULE_DEVICE_TABLE(i2c, inv_mpu_id); static const struct acpi_device_id inv_acpi_match[] = { - {"INVN6500", 0}, + {"INVN6500", INV_MPU6500}, { }, }; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index e302a49703bf..47ca25b94a73 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -68,6 +68,7 @@ enum inv_devices { INV_MPU6050, INV_MPU6500, INV_MPU6000, + INV_MPU9150, INV_NUM_PARTS }; @@ -93,13 +94,13 @@ struct inv_mpu6050_chip_config { /** * struct inv_mpu6050_hw - Other important hardware information. - * @num_reg: Number of registers on device. + * @whoami: Self identification byte from WHO_AM_I register * @name: name of the chip. * @reg: register map of the chip. * @config: configuration of the chip. */ struct inv_mpu6050_hw { - u8 num_reg; + u8 whoami; u8 *name; const struct inv_mpu6050_reg_map *reg; const struct inv_mpu6050_chip_config *config; @@ -114,7 +115,8 @@ struct inv_mpu6050_hw { * @hw: Other hardware-specific information. * @chip_type: chip type. * @time_stamp_lock: spin lock to time stamp. - * @plat_data: platform data. + * @plat_data: platform data (deprecated in favor of @orientation). + * @orientation: sensor chip orientation relative to main hardware. * @timestamps: kfifo queue to store time stamp. * @map regmap pointer. * @irq interrupt number. @@ -131,6 +133,7 @@ struct inv_mpu6050_state { struct i2c_client *mux_client; unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; + struct iio_mount_matrix orientation; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); struct regmap *map; int irq; @@ -215,6 +218,13 @@ struct inv_mpu6050_state { #define INV_MPU6050_MIN_FIFO_RATE 4 #define INV_MPU6050_ONE_K_HZ 1000 +#define INV_MPU6050_REG_WHOAMI 117 + +#define INV_MPU6000_WHOAMI_VALUE 0x68 +#define INV_MPU6050_WHOAMI_VALUE 0x68 +#define INV_MPU6500_WHOAMI_VALUE 0x70 +#define INV_MPU9150_WHOAMI_VALUE 0x68 + /* scan element definition */ enum inv_mpu6050_scan { INV_MPU6050_SCAN_ACCL_X, diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 7bcb8d839f05..190a4a51c830 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -44,9 +44,19 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) static int inv_mpu_probe(struct spi_device *spi) { struct regmap *regmap; - const struct spi_device_id *id = spi_get_device_id(spi); - const char *name = id ? id->name : NULL; - const int chip_type = id ? id->driver_data : 0; + const struct spi_device_id *spi_id; + const struct acpi_device_id *acpi_id; + const char *name = NULL; + enum inv_devices chip_type; + + if ((spi_id = spi_get_device_id(spi))) { + chip_type = (enum inv_devices)spi_id->driver_data; + name = spi_id->name; + } else if ((acpi_id = acpi_match_device(spi->dev.driver->acpi_match_table, &spi->dev))) { + chip_type = (enum inv_devices)acpi_id->driver_data; + } else { + return -ENODEV; + } regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config); if (IS_ERR(regmap)) { @@ -70,13 +80,15 @@ static int inv_mpu_remove(struct spi_device *spi) */ static const struct spi_device_id inv_mpu_id[] = { {"mpu6000", INV_MPU6000}, + {"mpu6500", INV_MPU6500}, + {"mpu9150", INV_MPU9150}, {} }; MODULE_DEVICE_TABLE(spi, inv_mpu_id); static const struct acpi_device_id inv_acpi_match[] = { - {"INVN6000", 0}, + {"INVN6000", INV_MPU6000}, { }, }; MODULE_DEVICE_TABLE(acpi, inv_acpi_match); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 190a5939fd8c..e6319a9346b2 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -412,6 +412,88 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, } EXPORT_SYMBOL_GPL(iio_enum_write); +static const struct iio_mount_matrix iio_mount_idmatrix = { + .rotation = { + "1", "0", "0", + "0", "1", "0", + "0", "0", "1" + } +}; + +static int iio_setup_mount_idmatrix(const struct device *dev, + struct iio_mount_matrix *matrix) +{ + *matrix = iio_mount_idmatrix; + dev_info(dev, "mounting matrix not found: using identity...\n"); + return 0; +} + +ssize_t iio_show_mount_matrix(struct iio_dev *indio_dev, uintptr_t priv, + const struct iio_chan_spec *chan, char *buf) +{ + const struct iio_mount_matrix *mtx = ((iio_get_mount_matrix_t *) + priv)(indio_dev, chan); + + if (IS_ERR(mtx)) + return PTR_ERR(mtx); + + if (!mtx) + mtx = &iio_mount_idmatrix; + + return snprintf(buf, PAGE_SIZE, "%s, %s, %s; %s, %s, %s; %s, %s, %s\n", + mtx->rotation[0], mtx->rotation[1], mtx->rotation[2], + mtx->rotation[3], mtx->rotation[4], mtx->rotation[5], + mtx->rotation[6], mtx->rotation[7], mtx->rotation[8]); +} +EXPORT_SYMBOL_GPL(iio_show_mount_matrix); + +/** + * of_iio_read_mount_matrix() - retrieve iio device mounting matrix from + * device-tree "mount-matrix" property + * @dev: device the mounting matrix property is assigned to + * @propname: device specific mounting matrix property name + * @matrix: where to store retrieved matrix + * + * If device is assigned no mounting matrix property, a default 3x3 identity + * matrix will be filled in. + * + * Return: 0 if success, or a negative error code on failure. + */ +#ifdef CONFIG_OF +int of_iio_read_mount_matrix(const struct device *dev, + const char *propname, + struct iio_mount_matrix *matrix) +{ + if (dev->of_node) { + int err = of_property_read_string_array(dev->of_node, + propname, matrix->rotation, + ARRAY_SIZE(iio_mount_idmatrix.rotation)); + + if (err == ARRAY_SIZE(iio_mount_idmatrix.rotation)) + return 0; + + if (err >= 0) + /* Invalid number of matrix entries. */ + return -EINVAL; + + if (err != -EINVAL) + /* Invalid matrix declaration format. */ + return err; + } + + /* Matrix was not declared at all: fallback to identity. */ + return iio_setup_mount_idmatrix(dev, matrix); +} +#else +int of_iio_read_mount_matrix(const struct device *dev, + const char *propname, + struct iio_mount_matrix *matrix) +{ + return iio_setup_mount_idmatrix(dev, matrix); +} +#endif +EXPORT_SYMBOL(of_iio_read_mount_matrix); + /** * iio_format_value() - Formats a IIO value into its string representation * @buf: The buffer to which the formatted value gets written diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 734a0042de0c..c4757e6367e7 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -356,6 +356,54 @@ void iio_channel_release(struct iio_channel *channel) } EXPORT_SYMBOL_GPL(iio_channel_release); +static void devm_iio_channel_free(struct device *dev, void *res) +{ + struct iio_channel *channel = *(struct iio_channel **)res; + + iio_channel_release(channel); +} + +static int devm_iio_channel_match(struct device *dev, void *res, void *data) +{ + struct iio_channel **r = res; + + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + + return *r == data; +} + +struct iio_channel *devm_iio_channel_get(struct device *dev, + const char *channel_name) +{ + struct iio_channel **ptr, *channel; + + ptr = devres_alloc(devm_iio_channel_free, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + channel = iio_channel_get(dev, channel_name); + if (IS_ERR(channel)) { + devres_free(ptr); + return channel; + } + + *ptr = channel; + devres_add(dev, ptr); + + return channel; +} +EXPORT_SYMBOL_GPL(devm_iio_channel_get); + +void devm_iio_channel_release(struct device *dev, struct iio_channel *channel) +{ + WARN_ON(devres_release(dev, devm_iio_channel_free, + devm_iio_channel_match, channel)); +} +EXPORT_SYMBOL_GPL(devm_iio_channel_release); + struct iio_channel *iio_channel_get_all(struct device *dev) { const char *name; @@ -441,6 +489,42 @@ void iio_channel_release_all(struct iio_channel *channels) } EXPORT_SYMBOL_GPL(iio_channel_release_all); +static void devm_iio_channel_free_all(struct device *dev, void *res) +{ + struct iio_channel *channels = *(struct iio_channel **)res; + + iio_channel_release_all(channels); +} + +struct iio_channel *devm_iio_channel_get_all(struct device *dev) +{ + struct iio_channel **ptr, *channels; + + ptr = devres_alloc(devm_iio_channel_free_all, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + channels = iio_channel_get_all(dev); + if (IS_ERR(channels)) { + devres_free(ptr); + return channels; + } + + *ptr = channels; + devres_add(dev, ptr); + + return channels; +} +EXPORT_SYMBOL_GPL(devm_iio_channel_get_all); + +void devm_iio_channel_release_all(struct device *dev, + struct iio_channel *channels) +{ + WARN_ON(devres_release(dev, devm_iio_channel_free_all, + devm_iio_channel_match, channels)); +} +EXPORT_SYMBOL_GPL(devm_iio_channel_release_all); + static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, enum iio_chan_info_enum info) { @@ -452,7 +536,7 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, if (val2 == NULL) val2 = &unused; - if(!iio_channel_has_info(chan->channel, info)) + if (!iio_channel_has_info(chan->channel, info)) return -EINVAL; if (chan->indio_dev->info->read_raw_multi) { diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index cfd3df8416bb..7c566f516572 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -73,6 +73,17 @@ config BH1750 To compile this driver as a module, choose M here: the module will be called bh1750. +config BH1780 + tristate "ROHM BH1780 ambient light sensor" + depends on I2C + depends on !SENSORS_BH1780 + help + Say Y here to build support for the ROHM BH1780GLI ambient + light sensor. + + To compile this driver as a module, choose M here: the module will + be called bh1780. + config CM32181 depends on I2C tristate "CM32181 driver" @@ -223,6 +234,17 @@ config LTR501 This driver can also be built as a module. If so, the module will be called ltr501. +config MAX44000 + tristate "MAX44000 Ambient and Infrared Proximity Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build support for Maxim Integrated's + MAX44000 ambient and infrared proximity sensor device. + + To compile this driver as a module, choose M here: + the module will be called max44000. + config OPT3001 tristate "Texas Instruments OPT3001 Light Sensor" depends on I2C @@ -320,4 +342,14 @@ config VCNL4000 To compile this driver as a module, choose M here: the module will be called vcnl4000. +config VEML6070 + tristate "VEML6070 UV A light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6070 UV A + light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6070. + endmenu diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index b2c31053db0c..6f2a3c62de27 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_APDS9300) += apds9300.o obj-$(CONFIG_APDS9960) += apds9960.o obj-$(CONFIG_BH1750) += bh1750.o +obj-$(CONFIG_BH1780) += bh1780.o obj-$(CONFIG_CM32181) += cm32181.o obj-$(CONFIG_CM3232) += cm3232.o obj-$(CONFIG_CM3323) += cm3323.o @@ -20,6 +21,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o +obj-$(CONFIG_MAX44000) += max44000.o obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_PA12203001) += pa12203001.o obj-$(CONFIG_RPR0521) += rpr0521.o @@ -30,3 +32,4 @@ obj-$(CONFIG_TCS3472) += tcs3472.o obj-$(CONFIG_TSL4531) += tsl4531.o obj-$(CONFIG_US5182D) += us5182d.o obj-$(CONFIG_VCNL4000) += vcnl4000.o +obj-$(CONFIG_VEML6070) += veml6070.o diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c index a6af56ad10e1..b4dbb3912977 100644 --- a/drivers/iio/light/apds9960.c +++ b/drivers/iio/light/apds9960.c @@ -321,8 +321,12 @@ static const struct iio_chan_spec apds9960_channels[] = { }; /* integration time in us */ -static const int apds9960_int_time[][2] = - { {28000, 246}, {100000, 219}, {200000, 182}, {700000, 0} }; +static const int apds9960_int_time[][2] = { + { 28000, 246}, + {100000, 219}, + {200000, 182}, + {700000, 0} +}; /* gain mapping */ static const int apds9960_pxs_gain_map[] = {1, 2, 4, 8}; @@ -491,9 +495,10 @@ static int apds9960_read_raw(struct iio_dev *indio_dev, case IIO_INTENSITY: ret = regmap_bulk_read(data->regmap, chan->address, &buf, 2); - if (!ret) + if (!ret) { ret = IIO_VAL_INT; - *val = le16_to_cpu(buf); + *val = le16_to_cpu(buf); + } break; default: ret = -EINVAL; diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c new file mode 100644 index 000000000000..72b364e4aa72 --- /dev/null +++ b/drivers/iio/light/bh1780.c @@ -0,0 +1,297 @@ +/* + * ROHM 1780GLI Ambient Light Sensor Driver + * + * Copyright (C) 2016 Linaro Ltd. + * Author: Linus Walleij <linus.walleij@linaro.org> + * Loosely based on the previous BH1780 ALS misc driver + * Copyright (C) 2010 Texas Instruments + * Author: Hemanth V <hemanthv@ti.com> + */ +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/bitops.h> + +#define BH1780_CMD_BIT BIT(7) +#define BH1780_REG_CONTROL 0x00 +#define BH1780_REG_PARTID 0x0A +#define BH1780_REG_MANFID 0x0B +#define BH1780_REG_DLOW 0x0C +#define BH1780_REG_DHIGH 0x0D + +#define BH1780_REVMASK GENMASK(3,0) +#define BH1780_POWMASK GENMASK(1,0) +#define BH1780_POFF (0x0) +#define BH1780_PON (0x3) + +/* power on settling time in ms */ +#define BH1780_PON_DELAY 2 +/* max time before value available in ms */ +#define BH1780_INTERVAL 250 + +struct bh1780_data { + struct i2c_client *client; +}; + +static int bh1780_write(struct bh1780_data *bh1780, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(bh1780->client, + BH1780_CMD_BIT | reg, + val); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_write_byte_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_read(struct bh1780_data *bh1780, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(bh1780->client, + BH1780_CMD_BIT | reg); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_read_byte_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_read_word(struct bh1780_data *bh1780, u8 reg) +{ + int ret = i2c_smbus_read_word_data(bh1780->client, + BH1780_CMD_BIT | reg); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_read_word_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int ret; + + if (!readval) + bh1780_write(bh1780, (u8)reg, (u8)writeval); + + ret = bh1780_read(bh1780, (u8)reg); + if (ret < 0) + return ret; + + *readval = ret; + + return 0; +} + +static int bh1780_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int value; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + pm_runtime_get_sync(&bh1780->client->dev); + value = bh1780_read_word(bh1780, BH1780_REG_DLOW); + if (value < 0) + return value; + pm_runtime_mark_last_busy(&bh1780->client->dev); + pm_runtime_put_autosuspend(&bh1780->client->dev); + *val = value; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = BH1780_INTERVAL * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info bh1780_info = { + .driver_module = THIS_MODULE, + .read_raw = bh1780_read_raw, + .debugfs_reg_access = bh1780_debugfs_reg_access, +}; + +static const struct iio_chan_spec bh1780_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_INT_TIME) + } +}; + +static int bh1780_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct bh1780_data *bh1780; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + return -EIO; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*bh1780)); + if (!indio_dev) + return -ENOMEM; + + bh1780 = iio_priv(indio_dev); + bh1780->client = client; + i2c_set_clientdata(client, indio_dev); + + /* Power up the device */ + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); + if (ret < 0) + return ret; + msleep(BH1780_PON_DELAY); + pm_runtime_get_noresume(&client->dev); + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + + ret = bh1780_read(bh1780, BH1780_REG_PARTID); + if (ret < 0) + goto out_disable_pm; + dev_info(&client->dev, + "Ambient Light Sensor, Rev : %lu\n", + (ret & BH1780_REVMASK)); + + /* + * As the device takes 250 ms to even come up with a fresh + * measurement after power-on, do not shut it down unnecessarily. + * Set autosuspend to a five seconds. + */ + pm_runtime_set_autosuspend_delay(&client->dev, 5000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put(&client->dev); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &bh1780_info; + indio_dev->name = id->name; + indio_dev->channels = bh1780_channels; + indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_device_register(indio_dev); + if (ret) + goto out_disable_pm; + return 0; + +out_disable_pm: + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + return ret; +} + +static int bh1780_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + pm_runtime_get_sync(&client->dev); + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); + if (ret < 0) { + dev_err(&client->dev, "failed to power off\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_PM +static int bh1780_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bh1780_data *bh1780 = i2c_get_clientdata(client); + int ret; + + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); + if (ret < 0) { + dev_err(dev, "failed to runtime suspend\n"); + return ret; + } + + return 0; +} + +static int bh1780_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bh1780_data *bh1780 = i2c_get_clientdata(client); + int ret; + + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); + if (ret < 0) { + dev_err(dev, "failed to runtime resume\n"); + return ret; + } + + /* Wait for power on, then for a value to be available */ + msleep(BH1780_PON_DELAY + BH1780_INTERVAL); + + return 0; +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops bh1780_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(bh1780_runtime_suspend, + bh1780_runtime_resume, NULL) +}; + +static const struct i2c_device_id bh1780_id[] = { + { "bh1780", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, bh1780_id); + +#ifdef CONFIG_OF +static const struct of_device_id of_bh1780_match[] = { + { .compatible = "rohm,bh1780gli", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_bh1780_match); +#endif + +static struct i2c_driver bh1780_driver = { + .probe = bh1780_probe, + .remove = bh1780_remove, + .id_table = bh1780_id, + .driver = { + .name = "bh1780", + .pm = &bh1780_dev_pm_ops, + .of_match_table = of_match_ptr(of_bh1780_match), + }, +}; + +module_i2c_driver(bh1780_driver); + +MODULE_DESCRIPTION("ROHM BH1780GLI Ambient Light Sensor Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c new file mode 100644 index 000000000000..e01e58a9bd14 --- /dev/null +++ b/drivers/iio/light/max44000.c @@ -0,0 +1,639 @@ +/* + * MAX44000 Ambient and Infrared Proximity Sensor + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Data sheet: https://datasheets.maximintegrated.com/en/ds/MAX44000.pdf + * + * 7-bit I2C slave address 0x4a + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/util_macros.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/acpi.h> + +#define MAX44000_DRV_NAME "max44000" + +/* Registers in datasheet order */ +#define MAX44000_REG_STATUS 0x00 +#define MAX44000_REG_CFG_MAIN 0x01 +#define MAX44000_REG_CFG_RX 0x02 +#define MAX44000_REG_CFG_TX 0x03 +#define MAX44000_REG_ALS_DATA_HI 0x04 +#define MAX44000_REG_ALS_DATA_LO 0x05 +#define MAX44000_REG_PRX_DATA 0x16 +#define MAX44000_REG_ALS_UPTHR_HI 0x06 +#define MAX44000_REG_ALS_UPTHR_LO 0x07 +#define MAX44000_REG_ALS_LOTHR_HI 0x08 +#define MAX44000_REG_ALS_LOTHR_LO 0x09 +#define MAX44000_REG_PST 0x0a +#define MAX44000_REG_PRX_IND 0x0b +#define MAX44000_REG_PRX_THR 0x0c +#define MAX44000_REG_TRIM_GAIN_GREEN 0x0f +#define MAX44000_REG_TRIM_GAIN_IR 0x10 + +/* REG_CFG bits */ +#define MAX44000_CFG_ALSINTE 0x01 +#define MAX44000_CFG_PRXINTE 0x02 +#define MAX44000_CFG_MASK 0x1c +#define MAX44000_CFG_MODE_SHUTDOWN 0x00 +#define MAX44000_CFG_MODE_ALS_GIR 0x04 +#define MAX44000_CFG_MODE_ALS_G 0x08 +#define MAX44000_CFG_MODE_ALS_IR 0x0c +#define MAX44000_CFG_MODE_ALS_PRX 0x10 +#define MAX44000_CFG_MODE_PRX 0x14 +#define MAX44000_CFG_TRIM 0x20 + +/* + * Upper 4 bits are not documented but start as 1 on powerup + * Setting them to 0 causes proximity to misbehave so set them to 1 + */ +#define MAX44000_REG_CFG_RX_DEFAULT 0xf0 + +/* REG_RX bits */ +#define MAX44000_CFG_RX_ALSTIM_MASK 0x0c +#define MAX44000_CFG_RX_ALSTIM_SHIFT 2 +#define MAX44000_CFG_RX_ALSPGA_MASK 0x03 +#define MAX44000_CFG_RX_ALSPGA_SHIFT 0 + +/* REG_TX bits */ +#define MAX44000_LED_CURRENT_MASK 0xf +#define MAX44000_LED_CURRENT_MAX 11 +#define MAX44000_LED_CURRENT_DEFAULT 6 + +#define MAX44000_ALSDATA_OVERFLOW 0x4000 + +struct max44000_data { + struct mutex lock; + struct regmap *regmap; +}; + +/* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */ +#define MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 5 + +/* Scale can be multiplied by up to 128x via ALSPGA for measurement gain */ +static const int max44000_alspga_shift[] = {0, 2, 4, 7}; +#define MAX44000_ALSPGA_MAX_SHIFT 7 + +/* + * Scale can be multiplied by up to 64x via ALSTIM because of lost resolution + * + * This scaling factor is hidden from userspace and instead accounted for when + * reading raw values from the device. + * + * This makes it possible to cleanly expose ALSPGA as IIO_CHAN_INFO_SCALE and + * ALSTIM as IIO_CHAN_INFO_INT_TIME without the values affecting each other. + * + * Handling this internally is also required for buffer support because the + * channel's scan_type can't be modified dynamically. + */ +static const int max44000_alstim_shift[] = {0, 2, 4, 6}; +#define MAX44000_ALSTIM_SHIFT(alstim) (2 * (alstim)) + +/* Available integration times with pretty manual alignment: */ +static const int max44000_int_time_avail_ns_array[] = { + 100000000, + 25000000, + 6250000, + 1562500, +}; +static const char max44000_int_time_avail_str[] = + "0.100 " + "0.025 " + "0.00625 " + "0.001625"; + +/* Available scales (internal to ulux) with pretty manual alignment: */ +static const int max44000_scale_avail_ulux_array[] = { + 31250, + 125000, + 500000, + 4000000, +}; +static const char max44000_scale_avail_str[] = + "0.03125 " + "0.125 " + "0.5 " + "4"; + +#define MAX44000_SCAN_INDEX_ALS 0 +#define MAX44000_SCAN_INDEX_PRX 1 + +static const struct iio_chan_spec max44000_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_INT_TIME), + .scan_index = MAX44000_SCAN_INDEX_ALS, + .scan_type = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + } + }, + { + .type = IIO_PROXIMITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = MAX44000_SCAN_INDEX_PRX, + .scan_type = { + .sign = 'u', + .realbits = 8, + .storagebits = 16, + } + }, + IIO_CHAN_SOFT_TIMESTAMP(2), + { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "led", + .output = 1, + .scan_index = -1, + }, +}; + +static int max44000_read_alstim(struct max44000_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); + if (ret < 0) + return ret; + return (val & MAX44000_CFG_RX_ALSTIM_MASK) >> MAX44000_CFG_RX_ALSTIM_SHIFT; +} + +static int max44000_write_alstim(struct max44000_data *data, int val) +{ + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_CFG_RX_ALSTIM_MASK, + val << MAX44000_CFG_RX_ALSTIM_SHIFT); +} + +static int max44000_read_alspga(struct max44000_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); + if (ret < 0) + return ret; + return (val & MAX44000_CFG_RX_ALSPGA_MASK) >> MAX44000_CFG_RX_ALSPGA_SHIFT; +} + +static int max44000_write_alspga(struct max44000_data *data, int val) +{ + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_CFG_RX_ALSPGA_MASK, + val << MAX44000_CFG_RX_ALSPGA_SHIFT); +} + +static int max44000_read_alsval(struct max44000_data *data) +{ + u16 regval; + int alstim, ret; + + ret = regmap_bulk_read(data->regmap, MAX44000_REG_ALS_DATA_HI, + ®val, sizeof(regval)); + if (ret < 0) + return ret; + alstim = ret = max44000_read_alstim(data); + if (ret < 0) + return ret; + + regval = be16_to_cpu(regval); + + /* + * Overflow is explained on datasheet page 17. + * + * It's a warning that either the G or IR channel has become saturated + * and that the value in the register is likely incorrect. + * + * The recommendation is to change the scale (ALSPGA). + * The driver just returns the max representable value. + */ + if (regval & MAX44000_ALSDATA_OVERFLOW) + return 0x3FFF; + + return regval << MAX44000_ALSTIM_SHIFT(alstim); +} + +static int max44000_write_led_current_raw(struct max44000_data *data, int val) +{ + /* Maybe we should clamp the value instead? */ + if (val < 0 || val > MAX44000_LED_CURRENT_MAX) + return -ERANGE; + if (val >= 8) + val += 4; + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_TX, + MAX44000_LED_CURRENT_MASK, val); +} + +static int max44000_read_led_current_raw(struct max44000_data *data) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_TX, ®val); + if (ret < 0) + return ret; + regval &= MAX44000_LED_CURRENT_MASK; + if (regval >= 8) + regval -= 4; + return regval; +} + +static int max44000_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max44000_data *data = iio_priv(indio_dev); + int alstim, alspga; + unsigned int regval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + mutex_lock(&data->lock); + ret = max44000_read_alsval(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + + case IIO_PROXIMITY: + mutex_lock(&data->lock); + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = regval; + return IIO_VAL_INT; + + case IIO_CURRENT: + mutex_lock(&data->lock); + ret = max44000_read_led_current_raw(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_CURRENT: + /* Output register is in 10s of miliamps */ + *val = 10; + return IIO_VAL_INT; + + case IIO_LIGHT: + mutex_lock(&data->lock); + alspga = ret = max44000_read_alspga(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + /* Avoid negative shifts */ + *val = (1 << MAX44000_ALSPGA_MAX_SHIFT); + *val2 = MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 + + MAX44000_ALSPGA_MAX_SHIFT + - max44000_alspga_shift[alspga]; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->lock); + alstim = ret = max44000_read_alstim(data); + mutex_unlock(&data->lock); + + if (ret < 0) + return ret; + *val = 0; + *val2 = max44000_int_time_avail_ns_array[alstim]; + return IIO_VAL_INT_PLUS_NANO; + + default: + return -EINVAL; + } +} + +static int max44000_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct max44000_data *data = iio_priv(indio_dev); + int ret; + + if (mask == IIO_CHAN_INFO_RAW && chan->type == IIO_CURRENT) { + mutex_lock(&data->lock); + ret = max44000_write_led_current_raw(data, val); + mutex_unlock(&data->lock); + return ret; + } else if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { + s64 valns = val * NSEC_PER_SEC + val2; + int alstim = find_closest_descending(valns, + max44000_int_time_avail_ns_array, + ARRAY_SIZE(max44000_int_time_avail_ns_array)); + mutex_lock(&data->lock); + ret = max44000_write_alstim(data, alstim); + mutex_unlock(&data->lock); + return ret; + } else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) { + s64 valus = val * USEC_PER_SEC + val2; + int alspga = find_closest(valus, + max44000_scale_avail_ulux_array, + ARRAY_SIZE(max44000_scale_avail_ulux_array)); + mutex_lock(&data->lock); + ret = max44000_write_alspga(data, alspga); + mutex_unlock(&data->lock); + return ret; + } + + return -EINVAL; +} + +static int max44000_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) + return IIO_VAL_INT_PLUS_NANO; + else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) + return IIO_VAL_INT_PLUS_MICRO; + else + return IIO_VAL_INT; +} + +static IIO_CONST_ATTR(illuminance_integration_time_available, max44000_int_time_avail_str); +static IIO_CONST_ATTR(illuminance_scale_available, max44000_scale_avail_str); + +static struct attribute *max44000_attributes[] = { + &iio_const_attr_illuminance_integration_time_available.dev_attr.attr, + &iio_const_attr_illuminance_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group max44000_attribute_group = { + .attrs = max44000_attributes, +}; + +static const struct iio_info max44000_info = { + .driver_module = THIS_MODULE, + .read_raw = max44000_read_raw, + .write_raw = max44000_write_raw, + .write_raw_get_fmt = max44000_write_raw_get_fmt, + .attrs = &max44000_attribute_group, +}; + +static bool max44000_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_STATUS: + case MAX44000_REG_CFG_MAIN: + case MAX44000_REG_CFG_RX: + case MAX44000_REG_CFG_TX: + case MAX44000_REG_ALS_DATA_HI: + case MAX44000_REG_ALS_DATA_LO: + case MAX44000_REG_PRX_DATA: + case MAX44000_REG_ALS_UPTHR_HI: + case MAX44000_REG_ALS_UPTHR_LO: + case MAX44000_REG_ALS_LOTHR_HI: + case MAX44000_REG_ALS_LOTHR_LO: + case MAX44000_REG_PST: + case MAX44000_REG_PRX_IND: + case MAX44000_REG_PRX_THR: + case MAX44000_REG_TRIM_GAIN_GREEN: + case MAX44000_REG_TRIM_GAIN_IR: + return true; + default: + return false; + } +} + +static bool max44000_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_CFG_MAIN: + case MAX44000_REG_CFG_RX: + case MAX44000_REG_CFG_TX: + case MAX44000_REG_ALS_UPTHR_HI: + case MAX44000_REG_ALS_UPTHR_LO: + case MAX44000_REG_ALS_LOTHR_HI: + case MAX44000_REG_ALS_LOTHR_LO: + case MAX44000_REG_PST: + case MAX44000_REG_PRX_IND: + case MAX44000_REG_PRX_THR: + case MAX44000_REG_TRIM_GAIN_GREEN: + case MAX44000_REG_TRIM_GAIN_IR: + return true; + default: + return false; + } +} + +static bool max44000_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_STATUS: + case MAX44000_REG_ALS_DATA_HI: + case MAX44000_REG_ALS_DATA_LO: + case MAX44000_REG_PRX_DATA: + return true; + default: + return false; + } +} + +static bool max44000_precious_reg(struct device *dev, unsigned int reg) +{ + return reg == MAX44000_REG_STATUS; +} + +static const struct regmap_config max44000_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = MAX44000_REG_PRX_DATA, + .readable_reg = max44000_readable_reg, + .writeable_reg = max44000_writeable_reg, + .volatile_reg = max44000_volatile_reg, + .precious_reg = max44000_precious_reg, + + .use_single_rw = 1, + .cache_type = REGCACHE_RBTREE, +}; + +static irqreturn_t max44000_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct max44000_data *data = iio_priv(indio_dev); + u16 buf[8]; /* 2x u16 + padding + 8 bytes timestamp */ + int index = 0; + unsigned int regval; + int ret; + + mutex_lock(&data->lock); + if (test_bit(MAX44000_SCAN_INDEX_ALS, indio_dev->active_scan_mask)) { + ret = max44000_read_alsval(data); + if (ret < 0) + goto out_unlock; + buf[index++] = ret; + } + if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) { + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); + if (ret < 0) + goto out_unlock; + buf[index] = regval; + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; + +out_unlock: + mutex_unlock(&data->lock); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int max44000_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max44000_data *data; + struct iio_dev *indio_dev; + int ret, reg; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + data->regmap = devm_regmap_init_i2c(client, &max44000_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap_init failed!\n"); + return PTR_ERR(data->regmap); + } + + i2c_set_clientdata(client, indio_dev); + mutex_init(&data->lock); + indio_dev->dev.parent = &client->dev; + indio_dev->info = &max44000_info; + indio_dev->name = MAX44000_DRV_NAME; + indio_dev->channels = max44000_channels; + indio_dev->num_channels = ARRAY_SIZE(max44000_channels); + + /* + * The device doesn't have a reset function so we just clear some + * important bits at probe time to ensure sane operation. + * + * Since we don't support interrupts/events the threshold values are + * not important. We also don't touch trim values. + */ + + /* Reset ALS scaling bits */ + ret = regmap_write(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_REG_CFG_RX_DEFAULT); + if (ret < 0) { + dev_err(&client->dev, "failed to write default CFG_RX: %d\n", + ret); + return ret; + } + + /* + * By default the LED pulse used for the proximity sensor is disabled. + * Set a middle value so that we get some sort of valid data by default. + */ + ret = max44000_write_led_current_raw(data, MAX44000_LED_CURRENT_DEFAULT); + if (ret < 0) { + dev_err(&client->dev, "failed to write init config: %d\n", ret); + return ret; + } + + /* Reset CFG bits to ALS_PRX mode which allows easy reading of both values. */ + reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_PRX; + ret = regmap_write(data->regmap, MAX44000_REG_CFG_MAIN, reg); + if (ret < 0) { + dev_err(&client->dev, "failed to write init config: %d\n", ret); + return ret; + } + + /* Read status at least once to clear any stale interrupt bits. */ + ret = regmap_read(data->regmap, MAX44000_REG_STATUS, ®); + if (ret < 0) { + dev_err(&client->dev, "failed to read init status: %d\n", ret); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, max44000_trigger_handler, NULL); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + + return iio_device_register(indio_dev); +} + +static int max44000_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} + +static const struct i2c_device_id max44000_id[] = { + {"max44000", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, max44000_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max44000_acpi_match[] = { + {"MAX44000", 0}, + { } +}; +MODULE_DEVICE_TABLE(acpi, max44000_acpi_match); +#endif + +static struct i2c_driver max44000_driver = { + .driver = { + .name = MAX44000_DRV_NAME, + .acpi_match_table = ACPI_PTR(max44000_acpi_match), + }, + .probe = max44000_probe, + .remove = max44000_remove, + .id_table = max44000_id, +}; + +module_i2c_driver(max44000_driver); + +MODULE_AUTHOR("Crestez Dan Leonard <leonard.crestez@intel.com>"); +MODULE_DESCRIPTION("MAX44000 Ambient and Infrared Proximity Sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/veml6070.c b/drivers/iio/light/veml6070.c new file mode 100644 index 000000000000..bc1c4cb782cd --- /dev/null +++ b/drivers/iio/light/veml6070.c @@ -0,0 +1,218 @@ +/* + * veml6070.c - Support for Vishay VEML6070 UV A light sensor + * + * Copyright 2016 Peter Meerwald-Stadler <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for VEML6070 (7-bit I2C slave addresses 0x38 and 0x39) + * + * TODO: integration time, ACK signal + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VEML6070_DRV_NAME "veml6070" + +#define VEML6070_ADDR_CONFIG_DATA_MSB 0x38 /* read: MSB data, write: config */ +#define VEML6070_ADDR_DATA_LSB 0x39 /* LSB data */ + +#define VEML6070_COMMAND_ACK BIT(5) /* raise interrupt when over threshold */ +#define VEML6070_COMMAND_IT GENMASK(3, 2) /* bit mask integration time */ +#define VEML6070_COMMAND_RSRVD BIT(1) /* reserved, set to 1 */ +#define VEML6070_COMMAND_SD BIT(0) /* shutdown mode when set */ + +#define VEML6070_IT_10 0x04 /* integration time 1x */ + +struct veml6070_data { + struct i2c_client *client1; + struct i2c_client *client2; + u8 config; + struct mutex lock; +}; + +static int veml6070_read(struct veml6070_data *data) +{ + int ret; + u8 msb, lsb; + + mutex_lock(&data->lock); + + /* disable shutdown */ + ret = i2c_smbus_write_byte(data->client1, + data->config & ~VEML6070_COMMAND_SD); + if (ret < 0) + goto out; + + msleep(125 + 10); /* measurement takes up to 125 ms for IT 1x */ + + ret = i2c_smbus_read_byte(data->client2); /* read MSB, address 0x39 */ + if (ret < 0) + goto out; + msb = ret; + + ret = i2c_smbus_read_byte(data->client1); /* read LSB, address 0x38 */ + if (ret < 0) + goto out; + lsb = ret; + + /* shutdown again */ + ret = i2c_smbus_write_byte(data->client1, data->config); + if (ret < 0) + goto out; + + ret = (msb << 8) | lsb; + +out: + mutex_unlock(&data->lock); + return ret; +} + +static const struct iio_chan_spec veml6070_channels[] = { + { + .type = IIO_INTENSITY, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_UV, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, + { + .type = IIO_UVINDEX, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + } +}; + +static int veml6070_to_uv_index(unsigned val) +{ + /* + * conversion of raw UV intensity values to UV index depends on + * integration time (IT) and value of the resistor connected to + * the RSET pin (default: 270 KOhm) + */ + unsigned uvi[11] = { + 187, 373, 560, /* low */ + 746, 933, 1120, /* moderate */ + 1308, 1494, /* high */ + 1681, 1868, 2054}; /* very high */ + int i; + + for (i = 0; i < ARRAY_SIZE(uvi); i++) + if (val <= uvi[i]) + return i; + + return 11; /* extreme */ +} + +static int veml6070_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct veml6070_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + ret = veml6070_read(data); + if (ret < 0) + return ret; + if (mask == IIO_CHAN_INFO_PROCESSED) + *val = veml6070_to_uv_index(ret); + else + *val = ret; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info veml6070_info = { + .read_raw = veml6070_read_raw, + .driver_module = THIS_MODULE, +}; + +static int veml6070_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct veml6070_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client1 = client; + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &veml6070_info; + indio_dev->channels = veml6070_channels; + indio_dev->num_channels = ARRAY_SIZE(veml6070_channels); + indio_dev->name = VEML6070_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + + data->client2 = i2c_new_dummy(client->adapter, VEML6070_ADDR_DATA_LSB); + if (!data->client2) { + dev_err(&client->dev, "i2c device for second chip address failed\n"); + return -ENODEV; + } + + data->config = VEML6070_IT_10 | VEML6070_COMMAND_RSRVD | + VEML6070_COMMAND_SD; + ret = i2c_smbus_write_byte(data->client1, data->config); + if (ret < 0) + goto fail; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto fail; + + return ret; + +fail: + i2c_unregister_device(data->client2); + return ret; +} + +static int veml6070_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct veml6070_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + i2c_unregister_device(data->client2); + + return 0; +} + +static const struct i2c_device_id veml6070_id[] = { + { "veml6070", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, veml6070_id); + +static struct i2c_driver veml6070_driver = { + .driver = { + .name = VEML6070_DRV_NAME, + }, + .probe = veml6070_probe, + .remove = veml6070_remove, + .id_table = veml6070_id, +}; + +module_i2c_driver(veml6070_driver); + +MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Vishay VEML6070 UV A light sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 021dc5361f53..84e6559ccc65 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -9,6 +9,8 @@ config AK8975 tristate "Asahi Kasei AK 3-Axis Magnetometer" depends on I2C depends on GPIOLIB || COMPILE_TEST + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Asahi Kasei AK8975, AK8963, AK09911 or AK09912 3-Axis Magnetometer. @@ -25,22 +27,41 @@ config AK09911 Deprecated: AK09911 is now supported by AK8975 driver. config BMC150_MAGN - tristate "Bosch BMC150 Magnetometer Driver" - depends on I2C - select REGMAP_I2C + tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER + +config BMC150_MAGN_I2C + tristate "Bosch BMC150 I2C Magnetometer Driver" + depends on I2C + select BMC150_MAGN + select REGMAP_I2C help - Say yes here to build support for the BMC150 magnetometer. + Say yes here to build support for the BMC150 magnetometer with + I2C interface. - Currently this only supports the device via an i2c interface. + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + To compile this driver as a module, choose M here: the module will be + called bmc150_magn_i2c. + +config BMC150_MAGN_SPI + tristate "Bosch BMC150 SPI Magnetometer Driver" + depends on SPI + select BMC150_MAGN + select REGMAP_SPI + help + Say yes here to build support for the BMC150 magnetometer with + SPI interface. This is a combo module with both accelerometer and magnetometer. This driver is only implementing magnetometer part, which has its own address and register map. To compile this driver as a module, choose M here: the module will be - called bmc150_magn. + called bmc150_magn_spi. config MAG3110 tristate "Freescale MAG3110 3-Axis Magnetometer" diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index dd03fe524481..92a745c9a6e8 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -5,6 +5,9 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AK8975) += ak8975.o obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o +obj-$(CONFIG_BMC150_MAGN_I2C) += bmc150_magn_i2c.o +obj-$(CONFIG_BMC150_MAGN_SPI) += bmc150_magn_spi.o + obj-$(CONFIG_MAG3110) += mag3110.o obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o obj-$(CONFIG_MMC35240) += mmc35240.o diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 48d127a45d90..dbf066129a04 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -36,6 +36,13 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include <linux/iio/magnetometer/ak8975.h> + /* * Register definitions, as well as various shifts and masks to get at the * individual fields of the registers. @@ -370,6 +377,7 @@ struct ak8975_data { wait_queue_head_t data_ready_queue; unsigned long flags; u8 cntl_cache; + struct iio_mount_matrix orientation; struct regulator *vdd; }; @@ -633,22 +641,15 @@ static int wait_conversion_complete_interrupt(struct ak8975_data *data) return ret > 0 ? 0 : -ETIME; } -/* - * Emits the raw flux value for the x, y, or z axis. - */ -static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) +static int ak8975_start_read_axis(struct ak8975_data *data, + const struct i2c_client *client) { - struct ak8975_data *data = iio_priv(indio_dev); - struct i2c_client *client = data->client; - int ret; - - mutex_lock(&data->lock); - /* Set up the device for taking a sample. */ - ret = ak8975_set_mode(data, MODE_ONCE); + int ret = ak8975_set_mode(data, MODE_ONCE); + if (ret < 0) { dev_err(&client->dev, "Error in setting operating mode\n"); - goto exit; + return ret; } /* Wait for the conversion to complete. */ @@ -659,7 +660,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) else ret = wait_conversion_complete_polled(data); if (ret < 0) - goto exit; + return ret; /* This will be executed only for non-interrupt based waiting case */ if (ret & data->def->ctrl_masks[ST1_DRDY]) { @@ -667,32 +668,45 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) data->def->ctrl_regs[ST2]); if (ret < 0) { dev_err(&client->dev, "Error in reading ST2\n"); - goto exit; + return ret; } if (ret & (data->def->ctrl_masks[ST2_DERR] | data->def->ctrl_masks[ST2_HOFL])) { dev_err(&client->dev, "ST2 status error 0x%x\n", ret); - ret = -EINVAL; - goto exit; + return -EINVAL; } } - /* Read the flux value from the appropriate register - (the register is specified in the iio device attributes). */ - ret = i2c_smbus_read_word_data(client, data->def->data_regs[index]); - if (ret < 0) { - dev_err(&client->dev, "Read axis data fails\n"); + return 0; +} + +/* Retrieve raw flux value for one of the x, y, or z axis. */ +static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) +{ + struct ak8975_data *data = iio_priv(indio_dev); + const struct i2c_client *client = data->client; + const struct ak_def *def = data->def; + int ret; + + mutex_lock(&data->lock); + + ret = ak8975_start_read_axis(data, client); + if (ret) + goto exit; + + ret = i2c_smbus_read_word_data(client, def->data_regs[index]); + if (ret < 0) goto exit; - } mutex_unlock(&data->lock); /* Clamp to valid range. */ - *val = clamp_t(s16, ret, -data->def->range, data->def->range); + *val = clamp_t(s16, ret, -def->range, def->range); return IIO_VAL_INT; exit: mutex_unlock(&data->lock); + dev_err(&client->dev, "Error in reading axis\n"); return ret; } @@ -714,6 +728,18 @@ static int ak8975_read_raw(struct iio_dev *indio_dev, return -EINVAL; } +static const struct iio_mount_matrix * +ak8975_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + return &((struct ak8975_data *)iio_priv(indio_dev))->orientation; +} + +static const struct iio_chan_spec_ext_info ak8975_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, ak8975_get_mount_matrix), + { }, +}; + #define AK8975_CHANNEL(axis, index) \ { \ .type = IIO_MAGN, \ @@ -722,12 +748,23 @@ static int ak8975_read_raw(struct iio_dev *indio_dev, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_SCALE), \ .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU \ + }, \ + .ext_info = ak8975_ext_info, \ } static const struct iio_chan_spec ak8975_channels[] = { AK8975_CHANNEL(X, 0), AK8975_CHANNEL(Y, 1), AK8975_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), }; +static const unsigned long ak8975_scan_masks[] = { 0x7, 0 }; + static const struct iio_info ak8975_info = { .read_raw = &ak8975_read_raw, .driver_module = THIS_MODULE, @@ -756,6 +793,56 @@ static const char *ak8975_match_acpi_device(struct device *dev, return dev_name(dev); } +static void ak8975_fill_buffer(struct iio_dev *indio_dev) +{ + struct ak8975_data *data = iio_priv(indio_dev); + const struct i2c_client *client = data->client; + const struct ak_def *def = data->def; + int ret; + s16 buff[8]; /* 3 x 16 bits axis values + 1 aligned 64 bits timestamp */ + + mutex_lock(&data->lock); + + ret = ak8975_start_read_axis(data, client); + if (ret) + goto unlock; + + /* + * For each axis, read the flux value from the appropriate register + * (the register is specified in the iio device attributes). + */ + ret = i2c_smbus_read_i2c_block_data_or_emulated(client, + def->data_regs[0], + 3 * sizeof(buff[0]), + (u8 *)buff); + if (ret < 0) + goto unlock; + + mutex_unlock(&data->lock); + + /* Clamp to valid range. */ + buff[0] = clamp_t(s16, le16_to_cpu(buff[0]), -def->range, def->range); + buff[1] = clamp_t(s16, le16_to_cpu(buff[1]), -def->range, def->range); + buff[2] = clamp_t(s16, le16_to_cpu(buff[2]), -def->range, def->range); + + iio_push_to_buffers_with_timestamp(indio_dev, buff, iio_get_time_ns()); + return; + +unlock: + mutex_unlock(&data->lock); + dev_err(&client->dev, "Error in reading axes block\n"); +} + +static irqreturn_t ak8975_handle_trigger(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + + ak8975_fill_buffer(indio_dev); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + static int ak8975_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -765,10 +852,12 @@ static int ak8975_probe(struct i2c_client *client, int err; const char *name = NULL; enum asahi_compass_chipset chipset; + const struct ak8975_platform_data *pdata = + dev_get_platdata(&client->dev); /* Grab and set up the supplied GPIO. */ - if (client->dev.platform_data) - eoc_gpio = *(int *)(client->dev.platform_data); + if (pdata) + eoc_gpio = pdata->eoc_gpio; else if (client->dev.of_node) eoc_gpio = of_get_gpio(client->dev.of_node, 0); else @@ -802,6 +891,15 @@ static int ak8975_probe(struct i2c_client *client, data->eoc_gpio = eoc_gpio; data->eoc_irq = 0; + if (!pdata) { + err = of_iio_read_mount_matrix(&client->dev, + "mount-matrix", + &data->orientation); + if (err) + return err; + } else + data->orientation = pdata->orientation; + /* id will be NULL when enumerated via ACPI */ if (id) { chipset = (enum asahi_compass_chipset)(id->driver_data); @@ -810,8 +908,7 @@ static int ak8975_probe(struct i2c_client *client, name = ak8975_match_acpi_device(&client->dev, &chipset); if (!name) return -ENODEV; - } - else + } else return -ENOSYS; if (chipset >= AK_MAX_TYPE) { @@ -845,15 +942,27 @@ static int ak8975_probe(struct i2c_client *client, indio_dev->channels = ak8975_channels; indio_dev->num_channels = ARRAY_SIZE(ak8975_channels); indio_dev->info = &ak8975_info; + indio_dev->available_scan_masks = ak8975_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->name = name; - err = iio_device_register(indio_dev); - if (err) + err = iio_triggered_buffer_setup(indio_dev, NULL, ak8975_handle_trigger, + NULL); + if (err) { + dev_err(&client->dev, "triggered buffer setup failed\n"); goto power_off; + } + + err = iio_device_register(indio_dev); + if (err) { + dev_err(&client->dev, "device register failed\n"); + goto cleanup_buffer; + } return 0; +cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); power_off: ak8975_power_off(client); return err; @@ -864,6 +973,7 @@ static int ak8975_remove(struct i2c_client *client) struct iio_dev *indio_dev = i2c_get_clientdata(client); iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); ak8975_power_off(client); return 0; diff --git a/drivers/iio/magnetometer/bmc150_magn.c b/drivers/iio/magnetometer/bmc150_magn.c index 0e9da189dc4c..d104fb8d9379 100644 --- a/drivers/iio/magnetometer/bmc150_magn.c +++ b/drivers/iio/magnetometer/bmc150_magn.c @@ -34,6 +34,8 @@ #include <linux/iio/triggered_buffer.h> #include <linux/regmap.h> +#include "bmc150_magn.h" + #define BMC150_MAGN_DRV_NAME "bmc150_magn" #define BMC150_MAGN_IRQ_NAME "bmc150_magn_event" @@ -134,7 +136,7 @@ struct bmc150_magn_trim_regs { } __packed; struct bmc150_magn_data { - struct i2c_client *client; + struct device *dev; /* * 1. Protect this structure. * 2. Serialize sequences that power on/off the device and access HW. @@ -146,6 +148,7 @@ struct bmc150_magn_data { struct iio_trigger *dready_trig; bool dready_trigger_on; int max_odr; + int irq; }; static const struct { @@ -215,7 +218,7 @@ static bool bmc150_magn_is_volatile_reg(struct device *dev, unsigned int reg) } } -static const struct regmap_config bmc150_magn_regmap_config = { +const struct regmap_config bmc150_magn_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -225,6 +228,7 @@ static const struct regmap_config bmc150_magn_regmap_config = { .writeable_reg = bmc150_magn_is_writeable_reg, .volatile_reg = bmc150_magn_is_volatile_reg, }; +EXPORT_SYMBOL(bmc150_magn_regmap_config); static int bmc150_magn_set_power_mode(struct bmc150_magn_data *data, enum bmc150_magn_power_modes mode, @@ -263,17 +267,17 @@ static int bmc150_magn_set_power_state(struct bmc150_magn_data *data, bool on) int ret; if (on) { - ret = pm_runtime_get_sync(&data->client->dev); + ret = pm_runtime_get_sync(data->dev); } else { - pm_runtime_mark_last_busy(&data->client->dev); - ret = pm_runtime_put_autosuspend(&data->client->dev); + pm_runtime_mark_last_busy(data->dev); + ret = pm_runtime_put_autosuspend(data->dev); } if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "failed to change power state to %d\n", on); if (on) - pm_runtime_put_noidle(&data->client->dev); + pm_runtime_put_noidle(data->dev); return ret; } @@ -350,7 +354,7 @@ static int bmc150_magn_set_max_odr(struct bmc150_magn_data *data, int rep_xy, /* the maximum selectable read-out frequency from datasheet */ max_odr = 1000000 / (145 * rep_xy + 500 * rep_z + 980); if (odr > max_odr) { - dev_err(&data->client->dev, + dev_err(data->dev, "Can't set oversampling with sampling freq %d\n", odr); return -EINVAL; @@ -684,27 +688,27 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, false); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Failed to bring up device from suspend mode\n"); return ret; } ret = regmap_read(data->regmap, BMC150_MAGN_REG_CHIP_ID, &chip_id); if (ret < 0) { - dev_err(&data->client->dev, "Failed reading chip id\n"); + dev_err(data->dev, "Failed reading chip id\n"); goto err_poweroff; } if (chip_id != BMC150_MAGN_CHIP_ID_VAL) { - dev_err(&data->client->dev, "Invalid chip id 0x%x\n", chip_id); + dev_err(data->dev, "Invalid chip id 0x%x\n", chip_id); ret = -ENODEV; goto err_poweroff; } - dev_dbg(&data->client->dev, "Chip id %x\n", chip_id); + dev_dbg(data->dev, "Chip id %x\n", chip_id); preset = bmc150_magn_presets_table[BMC150_MAGN_DEFAULT_PRESET]; ret = bmc150_magn_set_odr(data, preset.odr); if (ret < 0) { - dev_err(&data->client->dev, "Failed to set ODR to %d\n", + dev_err(data->dev, "Failed to set ODR to %d\n", preset.odr); goto err_poweroff; } @@ -712,7 +716,7 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_XY, BMC150_MAGN_REPXY_TO_REGVAL(preset.rep_xy)); if (ret < 0) { - dev_err(&data->client->dev, "Failed to set REP XY to %d\n", + dev_err(data->dev, "Failed to set REP XY to %d\n", preset.rep_xy); goto err_poweroff; } @@ -720,7 +724,7 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = regmap_write(data->regmap, BMC150_MAGN_REG_REP_Z, BMC150_MAGN_REPZ_TO_REGVAL(preset.rep_z)); if (ret < 0) { - dev_err(&data->client->dev, "Failed to set REP Z to %d\n", + dev_err(data->dev, "Failed to set REP Z to %d\n", preset.rep_z); goto err_poweroff; } @@ -733,7 +737,7 @@ static int bmc150_magn_init(struct bmc150_magn_data *data) ret = bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, true); if (ret < 0) { - dev_err(&data->client->dev, "Failed to power on device\n"); + dev_err(data->dev, "Failed to power on device\n"); goto err_poweroff; } @@ -842,41 +846,33 @@ static const char *bmc150_magn_match_acpi_device(struct device *dev) return dev_name(dev); } -static int bmc150_magn_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int bmc150_magn_probe(struct device *dev, struct regmap *regmap, + int irq, const char *name) { struct bmc150_magn_data *data; struct iio_dev *indio_dev; - const char *name = NULL; int ret; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); - i2c_set_clientdata(client, indio_dev); - data->client = client; + dev_set_drvdata(dev, indio_dev); + data->regmap = regmap; + data->irq = irq; + data->dev = dev; - if (id) - name = id->name; - else if (ACPI_HANDLE(&client->dev)) - name = bmc150_magn_match_acpi_device(&client->dev); - else - return -ENOSYS; + if (!name && ACPI_HANDLE(dev)) + name = bmc150_magn_match_acpi_device(dev); mutex_init(&data->mutex); - data->regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config); - if (IS_ERR(data->regmap)) { - dev_err(&client->dev, "Failed to allocate register map\n"); - return PTR_ERR(data->regmap); - } ret = bmc150_magn_init(data); if (ret < 0) return ret; - indio_dev->dev.parent = &client->dev; + indio_dev->dev.parent = dev; indio_dev->channels = bmc150_magn_channels; indio_dev->num_channels = ARRAY_SIZE(bmc150_magn_channels); indio_dev->available_scan_masks = bmc150_magn_scan_masks; @@ -884,35 +880,34 @@ static int bmc150_magn_probe(struct i2c_client *client, indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &bmc150_magn_info; - if (client->irq > 0) { - data->dready_trig = devm_iio_trigger_alloc(&client->dev, + if (irq > 0) { + data->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, indio_dev->id); if (!data->dready_trig) { ret = -ENOMEM; - dev_err(&client->dev, "iio trigger alloc failed\n"); + dev_err(dev, "iio trigger alloc failed\n"); goto err_poweroff; } - data->dready_trig->dev.parent = &client->dev; + data->dready_trig->dev.parent = dev; data->dready_trig->ops = &bmc150_magn_trigger_ops; iio_trigger_set_drvdata(data->dready_trig, indio_dev); ret = iio_trigger_register(data->dready_trig); if (ret) { - dev_err(&client->dev, "iio trigger register failed\n"); + dev_err(dev, "iio trigger register failed\n"); goto err_poweroff; } - ret = request_threaded_irq(client->irq, + ret = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, IRQF_TRIGGER_RISING | IRQF_ONESHOT, BMC150_MAGN_IRQ_NAME, data->dready_trig); if (ret < 0) { - dev_err(&client->dev, "request irq %d failed\n", - client->irq); + dev_err(dev, "request irq %d failed\n", irq); goto err_trigger_unregister; } } @@ -922,34 +917,33 @@ static int bmc150_magn_probe(struct i2c_client *client, bmc150_magn_trigger_handler, &bmc150_magn_buffer_setup_ops); if (ret < 0) { - dev_err(&client->dev, - "iio triggered buffer setup failed\n"); + dev_err(dev, "iio triggered buffer setup failed\n"); goto err_free_irq; } - ret = pm_runtime_set_active(&client->dev); + ret = pm_runtime_set_active(dev); if (ret) goto err_buffer_cleanup; - pm_runtime_enable(&client->dev); - pm_runtime_set_autosuspend_delay(&client->dev, + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, BMC150_MAGN_AUTO_SUSPEND_DELAY_MS); - pm_runtime_use_autosuspend(&client->dev); + pm_runtime_use_autosuspend(dev); ret = iio_device_register(indio_dev); if (ret < 0) { - dev_err(&client->dev, "unable to register iio device\n"); + dev_err(dev, "unable to register iio device\n"); goto err_buffer_cleanup; } - dev_dbg(&indio_dev->dev, "Registered device %s\n", name); + dev_dbg(dev, "Registered device %s\n", name); return 0; err_buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); err_free_irq: - if (client->irq > 0) - free_irq(client->irq, data->dready_trig); + if (irq > 0) + free_irq(irq, data->dready_trig); err_trigger_unregister: if (data->dready_trig) iio_trigger_unregister(data->dready_trig); @@ -957,22 +951,23 @@ err_poweroff: bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_SUSPEND, true); return ret; } +EXPORT_SYMBOL(bmc150_magn_probe); -static int bmc150_magn_remove(struct i2c_client *client) +int bmc150_magn_remove(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); - pm_runtime_disable(&client->dev); - pm_runtime_set_suspended(&client->dev); - pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); iio_triggered_buffer_cleanup(indio_dev); - if (client->irq > 0) - free_irq(data->client->irq, data->dready_trig); + if (data->irq > 0) + free_irq(data->irq, data->dready_trig); if (data->dready_trig) iio_trigger_unregister(data->dready_trig); @@ -983,11 +978,12 @@ static int bmc150_magn_remove(struct i2c_client *client) return 0; } +EXPORT_SYMBOL(bmc150_magn_remove); #ifdef CONFIG_PM static int bmc150_magn_runtime_suspend(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); int ret; @@ -996,7 +992,7 @@ static int bmc150_magn_runtime_suspend(struct device *dev) true); mutex_unlock(&data->mutex); if (ret < 0) { - dev_err(&data->client->dev, "powering off device failed\n"); + dev_err(dev, "powering off device failed\n"); return ret; } return 0; @@ -1007,7 +1003,7 @@ static int bmc150_magn_runtime_suspend(struct device *dev) */ static int bmc150_magn_runtime_resume(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); return bmc150_magn_set_power_mode(data, BMC150_MAGN_POWER_MODE_NORMAL, @@ -1018,7 +1014,7 @@ static int bmc150_magn_runtime_resume(struct device *dev) #ifdef CONFIG_PM_SLEEP static int bmc150_magn_suspend(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); int ret; @@ -1032,7 +1028,7 @@ static int bmc150_magn_suspend(struct device *dev) static int bmc150_magn_resume(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_magn_data *data = iio_priv(indio_dev); int ret; @@ -1045,38 +1041,13 @@ static int bmc150_magn_resume(struct device *dev) } #endif -static const struct dev_pm_ops bmc150_magn_pm_ops = { +const struct dev_pm_ops bmc150_magn_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bmc150_magn_suspend, bmc150_magn_resume) SET_RUNTIME_PM_OPS(bmc150_magn_runtime_suspend, bmc150_magn_runtime_resume, NULL) }; - -static const struct acpi_device_id bmc150_magn_acpi_match[] = { - {"BMC150B", 0}, - {"BMC156B", 0}, - {}, -}; -MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); - -static const struct i2c_device_id bmc150_magn_id[] = { - {"bmc150_magn", 0}, - {"bmc156_magn", 0}, - {}, -}; -MODULE_DEVICE_TABLE(i2c, bmc150_magn_id); - -static struct i2c_driver bmc150_magn_driver = { - .driver = { - .name = BMC150_MAGN_DRV_NAME, - .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), - .pm = &bmc150_magn_pm_ops, - }, - .probe = bmc150_magn_probe, - .remove = bmc150_magn_remove, - .id_table = bmc150_magn_id, -}; -module_i2c_driver(bmc150_magn_driver); +EXPORT_SYMBOL(bmc150_magn_pm_ops); MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("BMC150 magnetometer driver"); +MODULE_DESCRIPTION("BMC150 magnetometer core driver"); diff --git a/drivers/iio/magnetometer/bmc150_magn.h b/drivers/iio/magnetometer/bmc150_magn.h new file mode 100644 index 000000000000..9a8e26812ca8 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn.h @@ -0,0 +1,11 @@ +#ifndef _BMC150_MAGN_H_ +#define _BMC150_MAGN_H_ + +extern const struct regmap_config bmc150_magn_regmap_config; +extern const struct dev_pm_ops bmc150_magn_pm_ops; + +int bmc150_magn_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name); +int bmc150_magn_remove(struct device *dev); + +#endif /* _BMC150_MAGN_H_ */ diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c new file mode 100644 index 000000000000..eddc7f0d0096 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c @@ -0,0 +1,77 @@ +/* + * 3-axis magnetometer driver supporting following I2C Bosch-Sensortec chips: + * - BMC150 + * - BMC156 + * + * Copyright (c) 2016, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150_magn.h" + +static int bmc150_magn_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + + regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to initialize i2c regmap\n"); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bmc150_magn_probe(&client->dev, regmap, client->irq, name); +} + +static int bmc150_magn_i2c_remove(struct i2c_client *client) +{ + return bmc150_magn_remove(&client->dev); +} + +static const struct acpi_device_id bmc150_magn_acpi_match[] = { + {"BMC150B", 0}, + {"BMC156B", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); + +static const struct i2c_device_id bmc150_magn_i2c_id[] = { + {"bmc150_magn", 0}, + {"bmc156_magn", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, bmc150_magn_i2c_id); + +static struct i2c_driver bmc150_magn_driver = { + .driver = { + .name = "bmc150_magn_i2c", + .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .pm = &bmc150_magn_pm_ops, + }, + .probe = bmc150_magn_i2c_probe, + .remove = bmc150_magn_i2c_remove, + .id_table = bmc150_magn_i2c_id, +}; +module_i2c_driver(bmc150_magn_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 I2C magnetometer driver"); diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c new file mode 100644 index 000000000000..c4c738a07695 --- /dev/null +++ b/drivers/iio/magnetometer/bmc150_magn_spi.c @@ -0,0 +1,68 @@ +/* + * 3-axis magnetometer driver support following SPI Bosch-Sensortec chips: + * - BMC150 + * - BMC156 + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150_magn.h" + +static int bmc150_magn_spi_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + + regmap = devm_regmap_init_spi(spi, &bmc150_magn_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + return bmc150_magn_probe(&spi->dev, regmap, spi->irq, id->name); +} + +static int bmc150_magn_spi_remove(struct spi_device *spi) +{ + bmc150_magn_remove(&spi->dev); + + return 0; +} + +static const struct spi_device_id bmc150_magn_spi_id[] = { + {"bmc150_magn", 0}, + {"bmc156_magn", 0}, + {} +}; +MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id); + +static const struct acpi_device_id bmc150_magn_acpi_match[] = { + {"BMC150B", 0}, + {"BMC156B", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); + +static struct spi_driver bmc150_magn_spi_driver = { + .probe = bmc150_magn_spi_probe, + .remove = bmc150_magn_spi_remove, + .id_table = bmc150_magn_spi_id, + .driver = { + .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .name = "bmc150_magn_spi", + }, +}; +module_spi_driver(bmc150_magn_spi_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com"); +MODULE_DESCRIPTION("BMC150 magnetometer SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 501f858df413..62036d2a9956 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -484,6 +484,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .mask_int1 = ST_MAGN_3_DRDY_INT_MASK, .addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR, .mask_ihl = ST_MAGN_3_IHL_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_MAGN_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig index 7ea069bbca2d..6acb23810bb4 100644 --- a/drivers/iio/potentiometer/Kconfig +++ b/drivers/iio/potentiometer/Kconfig @@ -5,6 +5,16 @@ menu "Digital potentiometers" +config DS1803 + tristate "Maxim Integrated DS1803 Digital Potentiometer driver" + depends on I2C + help + Say yes here to build support for the Maxim Integrated DS1803 + digital potentiomenter chip. + + To compile this driver as a module, choose M here: the + module will be called ds1803. + config MCP4131 tristate "Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer driver" depends on SPI diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile index 91a80f8db24d..6007faa2fb02 100644 --- a/drivers/iio/potentiometer/Makefile +++ b/drivers/iio/potentiometer/Makefile @@ -3,6 +3,7 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_DS1803) += ds1803.o obj-$(CONFIG_MCP4131) += mcp4131.o obj-$(CONFIG_MCP4531) += mcp4531.o obj-$(CONFIG_TPL0102) += tpl0102.o diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c new file mode 100644 index 000000000000..fb9e2a337dc2 --- /dev/null +++ b/drivers/iio/potentiometer/ds1803.c @@ -0,0 +1,173 @@ +/* + * Maxim Integrated DS1803 digital potentiometer driver + * Copyright (c) 2016 Slawomir Stepien + * + * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf + * + * DEVID #Wipers #Positions Resistor Opts (kOhm) i2c address + * ds1803 2 256 10, 50, 100 0101xxx + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/export.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/of.h> + +#define DS1803_MAX_POS 255 +#define DS1803_WRITE(chan) (0xa8 | ((chan) + 1)) + +enum ds1803_type { + DS1803_010, + DS1803_050, + DS1803_100, +}; + +struct ds1803_cfg { + int kohms; +}; + +static const struct ds1803_cfg ds1803_cfg[] = { + [DS1803_010] = { .kohms = 10, }, + [DS1803_050] = { .kohms = 50, }, + [DS1803_100] = { .kohms = 100, }, +}; + +struct ds1803_data { + struct i2c_client *client; + const struct ds1803_cfg *cfg; +}; + +#define DS1803_CHANNEL(ch) { \ + .type = IIO_RESISTANCE, \ + .indexed = 1, \ + .output = 1, \ + .channel = (ch), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec ds1803_channels[] = { + DS1803_CHANNEL(0), + DS1803_CHANNEL(1), +}; + +static int ds1803_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ds1803_data *data = iio_priv(indio_dev); + int pot = chan->channel; + int ret; + u8 result[indio_dev->num_channels]; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = i2c_master_recv(data->client, result, + indio_dev->num_channels); + if (ret < 0) + return ret; + + *val = result[pot]; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 1000 * data->cfg->kohms; + *val2 = DS1803_MAX_POS; + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int ds1803_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct ds1803_data *data = iio_priv(indio_dev); + int pot = chan->channel; + + if (val2 != 0) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (val > DS1803_MAX_POS || val < 0) + return -EINVAL; + break; + default: + return -EINVAL; + } + + return i2c_smbus_write_byte_data(data->client, DS1803_WRITE(pot), val); +} + +static const struct iio_info ds1803_info = { + .read_raw = ds1803_read_raw, + .write_raw = ds1803_write_raw, + .driver_module = THIS_MODULE, +}; + +static int ds1803_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ds1803_data *data; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + i2c_set_clientdata(client, indio_dev); + + data = iio_priv(indio_dev); + data->client = client; + data->cfg = &ds1803_cfg[id->driver_data]; + + indio_dev->dev.parent = dev; + indio_dev->info = &ds1803_info; + indio_dev->channels = ds1803_channels; + indio_dev->num_channels = ARRAY_SIZE(ds1803_channels); + indio_dev->name = client->name; + + return devm_iio_device_register(dev, indio_dev); +} + +#if defined(CONFIG_OF) +static const struct of_device_id ds1803_dt_ids[] = { + { .compatible = "maxim,ds1803-010", .data = &ds1803_cfg[DS1803_010] }, + { .compatible = "maxim,ds1803-050", .data = &ds1803_cfg[DS1803_050] }, + { .compatible = "maxim,ds1803-100", .data = &ds1803_cfg[DS1803_100] }, + {} +}; +MODULE_DEVICE_TABLE(of, ds1803_dt_ids); +#endif /* CONFIG_OF */ + +static const struct i2c_device_id ds1803_id[] = { + { "ds1803-010", DS1803_010 }, + { "ds1803-050", DS1803_050 }, + { "ds1803-100", DS1803_100 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ds1803_id); + +static struct i2c_driver ds1803_driver = { + .driver = { + .name = "ds1803", + .of_match_table = of_match_ptr(ds1803_dt_ids), + }, + .probe = ds1803_probe, + .id_table = ds1803_id, +}; + +module_i2c_driver(ds1803_driver); + +MODULE_AUTHOR("Slawomir Stepien <sst@poczta.fm>"); +MODULE_DESCRIPTION("DS1803 digital potentiometer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 8de0192adea6..cda9f128f3a4 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -6,12 +6,13 @@ menu "Pressure sensors" config BMP280 - tristate "Bosch Sensortec BMP280 pressure sensor driver" + tristate "Bosch Sensortec BMP180 and BMP280 pressure sensor driver" depends on I2C + depends on !(BMP085_I2C=y || BMP085_I2C=m) select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP180 and BMP280 + pressure and temperature sensors. To compile this driver as a module, choose M here: the module will be called bmp280. @@ -30,6 +31,17 @@ config HID_SENSOR_PRESS To compile this driver as a module, choose M here: the module will be called hid-sensor-press. +config HP03 + tristate "Hope RF HP03 temperature and pressure sensor driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Hope RF HP03 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called hp03. + config MPL115 tristate diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 6e60863c1086..17d6e7afa1ff 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -5,6 +5,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o +obj-$(CONFIG_HP03) += hp03.o obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index a2602d8dd6d5..2f1498e12bb2 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -1,12 +1,15 @@ /* * Copyright (c) 2014 Intel Corporation * - * Driver for Bosch Sensortec BMP280 digital pressure sensor. + * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * + * Datasheet: + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf */ #define pr_fmt(fmt) "bmp280: " fmt @@ -15,9 +18,11 @@ #include <linux/i2c.h> #include <linux/acpi.h> #include <linux/regmap.h> +#include <linux/delay.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> +/* BMP280 specific registers */ #define BMP280_REG_TEMP_XLSB 0xFC #define BMP280_REG_TEMP_LSB 0xFB #define BMP280_REG_TEMP_MSB 0xFA @@ -26,10 +31,7 @@ #define BMP280_REG_PRESS_MSB 0xF7 #define BMP280_REG_CONFIG 0xF5 -#define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 -#define BMP280_REG_RESET 0xE0 -#define BMP280_REG_ID 0xD0 #define BMP280_REG_COMP_TEMP_START 0x88 #define BMP280_COMP_TEMP_REG_COUNT 6 @@ -46,25 +48,49 @@ #define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) #define BMP280_OSRS_TEMP_SKIP 0 -#define BMP280_OSRS_TEMP_1X BIT(5) -#define BMP280_OSRS_TEMP_2X BIT(6) -#define BMP280_OSRS_TEMP_4X (BIT(6) | BIT(5)) -#define BMP280_OSRS_TEMP_8X BIT(7) -#define BMP280_OSRS_TEMP_16X (BIT(7) | BIT(5)) +#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) +#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) +#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) +#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) +#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) +#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) #define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) #define BMP280_OSRS_PRESS_SKIP 0 -#define BMP280_OSRS_PRESS_1X BIT(2) -#define BMP280_OSRS_PRESS_2X BIT(3) -#define BMP280_OSRS_PRESS_4X (BIT(3) | BIT(2)) -#define BMP280_OSRS_PRESS_8X BIT(4) -#define BMP280_OSRS_PRESS_16X (BIT(4) | BIT(2)) +#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) +#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) +#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) +#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) +#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) +#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) #define BMP280_MODE_MASK (BIT(1) | BIT(0)) #define BMP280_MODE_SLEEP 0 #define BMP280_MODE_FORCED BIT(0) #define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) +/* BMP180 specific registers */ +#define BMP180_REG_OUT_XLSB 0xF8 +#define BMP180_REG_OUT_LSB 0xF7 +#define BMP180_REG_OUT_MSB 0xF6 + +#define BMP180_REG_CALIB_START 0xAA +#define BMP180_REG_CALIB_COUNT 22 + +#define BMP180_MEAS_SCO BIT(5) +#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) +#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) +#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) +#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) +#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) + +/* BMP180 and BMP280 common registers */ +#define BMP280_REG_CTRL_MEAS 0xF4 +#define BMP280_REG_RESET 0xE0 +#define BMP280_REG_ID 0xD0 + +#define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BMP280_SOFT_RESET_VAL 0xB6 @@ -72,6 +98,11 @@ struct bmp280_data { struct i2c_client *client; struct mutex lock; struct regmap *regmap; + const struct bmp280_chip_info *chip_info; + + /* log of base 2 of oversampling rate */ + u8 oversampling_press; + u8 oversampling_temp; /* * Carryover value from temperature conversion, used in pressure @@ -80,9 +111,23 @@ struct bmp280_data { s32 t_fine; }; +struct bmp280_chip_info { + const struct regmap_config *regmap_config; + + const int *oversampling_temp_avail; + int num_oversampling_temp_avail; + + const int *oversampling_press_avail; + int num_oversampling_press_avail; + + int (*chip_config)(struct bmp280_data *); + int (*read_temp)(struct bmp280_data *, int *); + int (*read_press)(struct bmp280_data *, int *, int *); +}; + /* * These enums are used for indexing into the array of compensation - * parameters. + * parameters for BMP280. */ enum { T1, T2, T3 }; enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 }; @@ -90,11 +135,13 @@ enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 }; static const struct iio_chan_spec bmp280_channels[] = { { .type = IIO_PRESSURE, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), }, { .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), }, }; @@ -290,10 +337,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_PRESSURE: - ret = bmp280_read_press(data, val, val2); + ret = data->chip_info->read_press(data, val, val2); break; case IIO_TEMP: - ret = bmp280_read_temp(data, val); + ret = data->chip_info->read_temp(data, val); + break; + default: + ret = -EINVAL; + break; + } + break; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + switch (chan->type) { + case IIO_PRESSURE: + *val = 1 << data->oversampling_press; + ret = IIO_VAL_INT; + break; + case IIO_TEMP: + *val = 1 << data->oversampling_temp; + ret = IIO_VAL_INT; break; default: ret = -EINVAL; @@ -310,22 +372,135 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, return ret; } +static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_temp_avail; + const int n = data->chip_info->num_oversampling_temp_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_temp = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_press_avail; + const int n = data->chip_info->num_oversampling_press_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_press = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + +static int bmp280_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret = 0; + struct bmp280_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + mutex_lock(&data->lock); + switch (chan->type) { + case IIO_PRESSURE: + ret = bmp280_write_oversampling_ratio_press(data, val); + break; + case IIO_TEMP: + ret = bmp280_write_oversampling_ratio_temp(data, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + break; + default: + return -EINVAL; + } + + return ret; +} + +static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n) +{ + size_t len = 0; + int i; + + for (i = 0; i < n; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]); + + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev)); + + return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail, + data->chip_info->num_oversampling_temp_avail); +} + +static ssize_t bmp280_show_press_oversampling_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev)); + + return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail, + data->chip_info->num_oversampling_press_avail); +} + +static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available, + S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0); + +static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available, + S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0); + +static struct attribute *bmp280_attributes[] = { + &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr, + &iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmp280_attrs_group = { + .attrs = bmp280_attributes, +}; + static const struct iio_info bmp280_info = { .driver_module = THIS_MODULE, .read_raw = &bmp280_read_raw, + .write_raw = &bmp280_write_raw, + .attrs = &bmp280_attrs_group, }; -static int bmp280_chip_init(struct bmp280_data *data) +static int bmp280_chip_config(struct bmp280_data *data) { int ret; + u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) | + BMP280_OSRS_PRESS_X(data->oversampling_press + 1); ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, - BMP280_OSRS_TEMP_2X | - BMP280_OSRS_PRESS_16X | - BMP280_MODE_NORMAL); + osrs | BMP280_MODE_NORMAL); if (ret < 0) { dev_err(&data->client->dev, "failed to write ctrl_meas register\n"); @@ -344,6 +519,317 @@ static int bmp280_chip_init(struct bmp280_data *data) return ret; } +static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; + +static const struct bmp280_chip_info bmp280_chip_info = { + .regmap_config = &bmp280_regmap_config, + + .oversampling_temp_avail = bmp280_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_press_avail = bmp280_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .chip_config = bmp280_chip_config, + .read_temp = bmp280_read_temp, + .read_press = bmp280_read_press, +}; + +static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP280_REG_CTRL_MEAS: + case BMP280_REG_RESET: + return true; + default: + return false; + }; +} + +static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BMP180_REG_OUT_XLSB: + case BMP180_REG_OUT_LSB: + case BMP180_REG_OUT_MSB: + case BMP280_REG_CTRL_MEAS: + return true; + default: + return false; + } +} + +static const struct regmap_config bmp180_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BMP180_REG_OUT_XLSB, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = bmp180_is_writeable_reg, + .volatile_reg = bmp180_is_volatile_reg, +}; + +static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) +{ + int ret; + const int conversion_time_max[] = { 4500, 7500, 13500, 25500 }; + unsigned int delay_us; + unsigned int ctrl; + + ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas); + if (ret) + return ret; + + if (ctrl_meas == BMP180_MEAS_TEMP) + delay_us = 4500; + else + delay_us = conversion_time_max[data->oversampling_press]; + + usleep_range(delay_us, delay_us + 1000); + + ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl); + if (ret) + return ret; + + /* The value of this bit reset to "0" after conversion is complete */ + if (ctrl & BMP180_MEAS_SCO) + return -EIO; + + return 0; +} + +static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) +{ + int ret; + __be16 tmp = 0; + + ret = bmp180_measure(data, BMP180_MEAS_TEMP); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2); + if (ret) + return ret; + + *val = be16_to_cpu(tmp); + + return 0; +} + +/* + * These enums are used for indexing into the array of calibration + * coefficients for BMP180. + */ +enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD }; + +struct bmp180_calib { + s16 AC1; + s16 AC2; + s16 AC3; + u16 AC4; + u16 AC5; + u16 AC6; + s16 B1; + s16 B2; + s16 MB; + s16 MC; + s16 MD; +}; + +static int bmp180_read_calib(struct bmp280_data *data, + struct bmp180_calib *calib) +{ + int ret; + int i; + __be16 buf[BMP180_REG_CALIB_COUNT / 2]; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf, + sizeof(buf)); + + if (ret < 0) + return ret; + + /* None of the words has the value 0 or 0xFFFF */ + for (i = 0; i < ARRAY_SIZE(buf); i++) { + if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff)) + return -EIO; + } + + calib->AC1 = be16_to_cpu(buf[AC1]); + calib->AC2 = be16_to_cpu(buf[AC2]); + calib->AC3 = be16_to_cpu(buf[AC3]); + calib->AC4 = be16_to_cpu(buf[AC4]); + calib->AC5 = be16_to_cpu(buf[AC5]); + calib->AC6 = be16_to_cpu(buf[AC6]); + calib->B1 = be16_to_cpu(buf[B1]); + calib->B2 = be16_to_cpu(buf[B2]); + calib->MB = be16_to_cpu(buf[MB]); + calib->MC = be16_to_cpu(buf[MC]); + calib->MD = be16_to_cpu(buf[MD]); + + return 0; +} + +/* + * Returns temperature in DegC, resolution is 0.1 DegC. + * t_fine carries fine temperature as global value. + * + * Taken from datasheet, Section 3.5, "Calculating pressure and temperature". + */ +static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp) +{ + int ret; + s32 x1, x2; + struct bmp180_calib calib; + + ret = bmp180_read_calib(data, &calib); + if (ret < 0) { + dev_err(&data->client->dev, + "failed to read calibration coefficients\n"); + return ret; + } + + x1 = ((adc_temp - calib.AC6) * calib.AC5) >> 15; + x2 = (calib.MC << 11) / (x1 + calib.MD); + data->t_fine = x1 + x2; + + return (data->t_fine + 8) >> 4; +} + +static int bmp180_read_temp(struct bmp280_data *data, int *val) +{ + int ret; + s32 adc_temp, comp_temp; + + ret = bmp180_read_adc_temp(data, &adc_temp); + if (ret) + return ret; + + comp_temp = bmp180_compensate_temp(data, adc_temp); + + /* + * val might be NULL if we're called by the read_press routine, + * who only cares about the carry over t_fine value. + */ + if (val) { + *val = comp_temp * 100; + return IIO_VAL_INT; + } + + return 0; +} + +static int bmp180_read_adc_press(struct bmp280_data *data, int *val) +{ + int ret; + __be32 tmp = 0; + u8 oss = data->oversampling_press; + + ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss)); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3); + if (ret) + return ret; + + *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss); + + return 0; +} + +/* + * Returns pressure in Pa, resolution is 1 Pa. + * + * Taken from datasheet, Section 3.5, "Calculating pressure and temperature". + */ +static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press) +{ + int ret; + s32 x1, x2, x3, p; + s32 b3, b6; + u32 b4, b7; + s32 oss = data->oversampling_press; + struct bmp180_calib calib; + + ret = bmp180_read_calib(data, &calib); + if (ret < 0) { + dev_err(&data->client->dev, + "failed to read calibration coefficients\n"); + return ret; + } + + b6 = data->t_fine - 4000; + x1 = (calib.B2 * (b6 * b6 >> 12)) >> 11; + x2 = calib.AC2 * b6 >> 11; + x3 = x1 + x2; + b3 = ((((s32)calib.AC1 * 4 + x3) << oss) + 2) / 4; + x1 = calib.AC3 * b6 >> 13; + x2 = (calib.B1 * ((b6 * b6) >> 12)) >> 16; + x3 = (x1 + x2 + 2) >> 2; + b4 = calib.AC4 * (u32)(x3 + 32768) >> 15; + b7 = ((u32)adc_press - b3) * (50000 >> oss); + if (b7 < 0x80000000) + p = (b7 * 2) / b4; + else + p = (b7 / b4) * 2; + + x1 = (p >> 8) * (p >> 8); + x1 = (x1 * 3038) >> 16; + x2 = (-7357 * p) >> 16; + + return p + ((x1 + x2 + 3791) >> 4); +} + +static int bmp180_read_press(struct bmp280_data *data, + int *val, int *val2) +{ + int ret; + s32 adc_press; + u32 comp_press; + + /* Read and compensate temperature so we get a reading of t_fine. */ + ret = bmp180_read_temp(data, NULL); + if (ret) + return ret; + + ret = bmp180_read_adc_press(data, &adc_press); + if (ret) + return ret; + + comp_press = bmp180_compensate_press(data, adc_press); + + *val = comp_press; + *val2 = 1000; + + return IIO_VAL_FRACTIONAL; +} + +static int bmp180_chip_config(struct bmp280_data *data) +{ + return 0; +} + +static const int bmp180_oversampling_temp_avail[] = { 1 }; +static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; + +static const struct bmp280_chip_info bmp180_chip_info = { + .regmap_config = &bmp180_regmap_config, + + .oversampling_temp_avail = bmp180_oversampling_temp_avail, + .num_oversampling_temp_avail = + ARRAY_SIZE(bmp180_oversampling_temp_avail), + + .oversampling_press_avail = bmp180_oversampling_press_avail, + .num_oversampling_press_avail = + ARRAY_SIZE(bmp180_oversampling_press_avail), + + .chip_config = bmp180_chip_config, + .read_temp = bmp180_read_temp, + .read_press = bmp180_read_press, +}; + static int bmp280_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -367,7 +853,23 @@ static int bmp280_probe(struct i2c_client *client, indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; - data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config); + switch (id->driver_data) { + case BMP180_CHIP_ID: + data->chip_info = &bmp180_chip_info; + data->oversampling_press = ilog2(8); + data->oversampling_temp = ilog2(1); + break; + case BMP280_CHIP_ID: + data->chip_info = &bmp280_chip_info; + data->oversampling_press = ilog2(16); + data->oversampling_temp = ilog2(2); + break; + default: + return -EINVAL; + } + + data->regmap = devm_regmap_init_i2c(client, + data->chip_info->regmap_config); if (IS_ERR(data->regmap)) { dev_err(&client->dev, "failed to allocate register map\n"); return PTR_ERR(data->regmap); @@ -376,13 +878,13 @@ static int bmp280_probe(struct i2c_client *client, ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id); if (ret < 0) return ret; - if (chip_id != BMP280_CHIP_ID) { + if (chip_id != id->driver_data) { dev_err(&client->dev, "bad chip id. expected %x got %x\n", BMP280_CHIP_ID, chip_id); return -EINVAL; } - ret = bmp280_chip_init(data); + ret = data->chip_info->chip_config(data); if (ret < 0) return ret; @@ -390,13 +892,17 @@ static int bmp280_probe(struct i2c_client *client, } static const struct acpi_device_id bmp280_acpi_match[] = { - {"BMP0280", 0}, + {"BMP0280", BMP280_CHIP_ID }, + {"BMP0180", BMP180_CHIP_ID }, + {"BMP0085", BMP180_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match); static const struct i2c_device_id bmp280_id[] = { - {"bmp280", 0}, + {"bmp280", BMP280_CHIP_ID }, + {"bmp180", BMP180_CHIP_ID }, + {"bmp085", BMP180_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_id); @@ -412,5 +918,5 @@ static struct i2c_driver bmp280_driver = { module_i2c_driver(bmp280_driver); MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); -MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor"); +MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c new file mode 100644 index 000000000000..ac76515d5d49 --- /dev/null +++ b/drivers/iio/pressure/hp03.c @@ -0,0 +1,312 @@ +/* + * Copyright (c) 2016 Marek Vasut <marex@denx.de> + * + * Driver for Hope RF HP03 digital temperature and pressure sensor. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "hp03: " fmt + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +/* + * The HP03 sensor occupies two fixed I2C addresses: + * 0x50 ... read-only EEPROM with calibration data + * 0x77 ... read-write ADC for pressure and temperature + */ +#define HP03_EEPROM_ADDR 0x50 +#define HP03_ADC_ADDR 0x77 + +#define HP03_EEPROM_CX_OFFSET 0x10 +#define HP03_EEPROM_AB_OFFSET 0x1e +#define HP03_EEPROM_CD_OFFSET 0x20 + +#define HP03_ADC_WRITE_REG 0xff +#define HP03_ADC_READ_REG 0xfd +#define HP03_ADC_READ_PRESSURE 0xf0 /* D1 in datasheet */ +#define HP03_ADC_READ_TEMP 0xe8 /* D2 in datasheet */ + +struct hp03_priv { + struct i2c_client *client; + struct mutex lock; + struct gpio_desc *xclr_gpio; + + struct i2c_client *eeprom_client; + struct regmap *eeprom_regmap; + + s32 pressure; /* kPa */ + s32 temp; /* Deg. C */ +}; + +static const struct iio_chan_spec hp03_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static const struct regmap_config hp03_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = HP03_EEPROM_CD_OFFSET + 1, + .cache_type = REGCACHE_RBTREE, + + .writeable_reg = hp03_is_writeable_reg, + .volatile_reg = hp03_is_volatile_reg, +}; + +static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg); + if (ret < 0) + return ret; + + msleep(50); /* Wait for conversion to finish */ + + return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG); +} + +static int hp03_update_temp_pressure(struct hp03_priv *priv) +{ + struct device *dev = &priv->client->dev; + u8 coefs[18]; + u16 cx_val[7]; + int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x; + int i, ret; + + /* Sample coefficients from EEPROM */ + ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET, + coefs, sizeof(coefs)); + if (ret < 0) { + dev_err(dev, "Failed to read EEPROM (reg=%02x)\n", + HP03_EEPROM_CX_OFFSET); + return ret; + } + + /* Sample Temperature and Pressure */ + gpiod_set_value_cansleep(priv->xclr_gpio, 1); + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE); + if (ret < 0) { + dev_err(dev, "Failed to read pressure\n"); + goto err_adc; + } + d1_val = ret; + + ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP); + if (ret < 0) { + dev_err(dev, "Failed to read temperature\n"); + goto err_adc; + } + d2_val = ret; + + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + + /* The Cx coefficients and Temp/Pressure values are MSB first. */ + for (i = 0; i < 7; i++) + cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0); + d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8); + d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8); + + /* Coefficient voodoo from the HP03 datasheet. */ + if (d2_val >= cx_val[4]) + ab_val = coefs[14]; /* A-value */ + else + ab_val = coefs[15]; /* B-value */ + + diff_val = d2_val - cx_val[4]; + dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16]; + dut = diff_val - dut; + + off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4; + sens = cx_val[0] + ((cx_val[2] * dut) >> 10); + x = ((sens * (d1_val - 7168)) >> 14) - off; + + priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10); + priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]); + + return 0; + +err_adc: + gpiod_set_value_cansleep(priv->xclr_gpio, 0); + return ret; +} + +static int hp03_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hp03_priv *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + ret = hp03_update_temp_pressure(priv); + mutex_unlock(&priv->lock); + + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PRESSURE: + *val = priv->pressure; + return IIO_VAL_INT; + case IIO_TEMP: + *val = priv->temp; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info hp03_info = { + .driver_module = THIS_MODULE, + .read_raw = &hp03_read_raw, +}; + +static int hp03_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct iio_dev *indio_dev; + struct hp03_priv *priv; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + priv->client = client; + mutex_init(&priv->lock); + + indio_dev->dev.parent = dev; + indio_dev->name = id->name; + indio_dev->channels = hp03_channels; + indio_dev->num_channels = ARRAY_SIZE(hp03_channels); + indio_dev->info = &hp03_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH); + if (IS_ERR(priv->xclr_gpio)) { + dev_err(dev, "Failed to claim XCLR GPIO\n"); + ret = PTR_ERR(priv->xclr_gpio); + return ret; + } + + /* + * Allocate another device for the on-sensor EEPROM, + * which has it's dedicated I2C address and contains + * the calibration constants for the sensor. + */ + priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR); + if (!priv->eeprom_client) { + dev_err(dev, "New EEPROM I2C device failed\n"); + return -ENODEV; + } + + priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client, + &hp03_regmap_config); + if (IS_ERR(priv->eeprom_regmap)) { + dev_err(dev, "Failed to allocate EEPROM regmap\n"); + ret = PTR_ERR(priv->eeprom_regmap); + goto err_cleanup_eeprom_client; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_cleanup_eeprom_regmap; + } + + i2c_set_clientdata(client, indio_dev); + + return 0; + +err_cleanup_eeprom_regmap: + regmap_exit(priv->eeprom_regmap); + +err_cleanup_eeprom_client: + i2c_unregister_device(priv->eeprom_client); + return ret; +} + +static int hp03_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hp03_priv *priv = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regmap_exit(priv->eeprom_regmap); + i2c_unregister_device(priv->eeprom_client); + + return 0; +} + +static const struct i2c_device_id hp03_id[] = { + { "hp03", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, hp03_id); + +static struct i2c_driver hp03_driver = { + .driver = { + .name = "hp03", + }, + .probe = hp03_probe, + .remove = hp03_remove, + .id_table = hp03_id, +}; +module_i2c_driver(hp03_driver); + +MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); +MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c index c4e65868bc28..76578b07bb6e 100644 --- a/drivers/iio/pressure/ms5611_core.c +++ b/drivers/iio/pressure/ms5611_core.c @@ -429,7 +429,7 @@ static void ms5611_fini(const struct iio_dev *indio_dev) } int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, - const char *name, int type) + const char *name, int type) { int ret; struct ms5611_state *st = iio_priv(indio_dev); diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c index 7600483e8cb4..932e05001e1a 100644 --- a/drivers/iio/pressure/ms5611_spi.c +++ b/drivers/iio/pressure/ms5611_spi.c @@ -108,7 +108,7 @@ static int ms5611_spi_probe(struct spi_device *spi) st->client = spi; return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name, - spi_get_device_id(spi)->driver_data); + spi_get_device_id(spi)->driver_data); } static int ms5611_spi_remove(struct spi_device *spi) diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 172393ad34af..9e9b72a8f18f 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -64,6 +64,8 @@ #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 #define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80 +#define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22 +#define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true #define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 @@ -104,6 +106,8 @@ #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 #define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22 #define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80 +#define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22 +#define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40 #define ST_PRESS_LPS25H_MULTIREAD_BIT true #define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 @@ -226,6 +230,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR, .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK, + .addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR, + .mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT, .bootime = 2, @@ -312,6 +319,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR, .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK, + .addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR, + .mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK, + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, }, .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, .bootime = 2, |
