diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/accel/bmc150-accel.c | 97 |
1 files changed, 47 insertions, 50 deletions
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index 066d0c04072c..2b6b80d700e4 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -269,6 +269,37 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val, return -EINVAL; } +static int bmc150_accel_update_slope(struct bmc150_accel_data *data) +{ + int ret, val; + + ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_6, + data->slope_thres); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_int_6\n"); + return ret; + } + + ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_int_5\n"); + return ret; + } + + val = (ret & ~BMC150_ACCEL_SLOPE_DUR_MASK) | data->slope_dur; + ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_5, + val); + if (ret < 0) { + dev_err(&data->client->dev, "Error write reg_int_5\n"); + return ret; + } + + dev_dbg(&data->client->dev, "%s: %x %x\n", __func__, data->slope_thres, + data->slope_dur); + + return ret; +} + static int bmc150_accel_chip_init(struct bmc150_accel_data *data) { int ret; @@ -307,32 +338,12 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) data->range = BMC150_ACCEL_DEF_RANGE_4G; - /* Set default slope duration */ - ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5); - if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_5\n"); - return ret; - } - data->slope_dur |= BMC150_ACCEL_DEF_SLOPE_DURATION; - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_5, - data->slope_dur); - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_5\n"); - return ret; - } - dev_dbg(&data->client->dev, "slope_dur %x\n", data->slope_dur); - - /* Set default slope thresholds */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_6, - BMC150_ACCEL_DEF_SLOPE_THRESHOLD); - if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_6\n"); - return ret; - } + /* Set default slope duration and thresholds */ data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD; - dev_dbg(&data->client->dev, "slope_thres %x\n", data->slope_thres); + data->slope_dur = BMC150_ACCEL_DEF_SLOPE_DURATION; + ret = bmc150_accel_update_slope(data); + if (ret < 0) + return ret; /* Set default as latched interrupts */ ret = i2c_smbus_write_byte_data(data->client, @@ -375,24 +386,6 @@ static int bmc150_accel_setup_any_motion_interrupt( } if (status) { - /* Set slope duration (no of samples) */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_5, - data->slope_dur); - if (ret < 0) { - dev_err(&data->client->dev, "Error write reg_int_5\n"); - return ret; - } - - /* Set slope thresholds */ - ret = i2c_smbus_write_byte_data(data->client, - BMC150_ACCEL_REG_INT_6, - data->slope_thres); - if (ret < 0) { - dev_err(&data->client->dev, "Error write reg_int_6\n"); - return ret; - } - /* * New data interrupt is always non-latched, * which will have higher priority, so no need @@ -732,7 +725,7 @@ static int bmc150_accel_read_event(struct iio_dev *indio_dev, *val = data->slope_thres; break; case IIO_EV_INFO_PERIOD: - *val = data->slope_dur & BMC150_ACCEL_SLOPE_DUR_MASK; + *val = data->slope_dur; break; default: return -EINVAL; @@ -755,11 +748,10 @@ static int bmc150_accel_write_event(struct iio_dev *indio_dev, switch (info) { case IIO_EV_INFO_VALUE: - data->slope_thres = val; + data->slope_thres = val & 0xFF; break; case IIO_EV_INFO_PERIOD: - data->slope_dur &= ~BMC150_ACCEL_SLOPE_DUR_MASK; - data->slope_dur |= val & BMC150_ACCEL_SLOPE_DUR_MASK; + data->slope_dur = val & BMC150_ACCEL_SLOPE_DUR_MASK; break; default: return -EINVAL; @@ -1056,10 +1048,15 @@ static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig, mutex_unlock(&data->mutex); return ret; } - if (data->motion_trig == trig) - ret = bmc150_accel_setup_any_motion_interrupt(data, state); - else + + if (data->motion_trig == trig) { + ret = bmc150_accel_update_slope(data); + if (!ret) + ret = bmc150_accel_setup_any_motion_interrupt(data, + state); + } else { ret = bmc150_accel_setup_new_data_interrupt(data, state); + } if (ret < 0) { bmc150_accel_set_power_state(data, false); mutex_unlock(&data->mutex); |
