diff options
Diffstat (limited to 'drivers/ide/pci')
| -rw-r--r-- | drivers/ide/pci/cy82c693.c | 2 | ||||
| -rw-r--r-- | drivers/ide/pci/opti621.c | 3 |
2 files changed, 1 insertions, 4 deletions
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 8ef551ab9571..77cc22c2ad45 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -18,8 +18,6 @@ * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA * - this is my first linux driver, so there's probably a lot of room * for optimizations and bug fixing, so feel free to do it. - * - use idebus=xx parameter to set PCI bus speed - needed to calc - * timings for PIO modes (default will be 40) * - if using PIO mode it's a good idea to set the PIO mode and * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda * - I had some problems with my IBM DHEA with PIO modes < 2 diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index f766be9afaf9..684160d3cc0e 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -53,8 +53,7 @@ * If you then set the second drive to another PIO, the old value * (automatically selected) will be overrided by yours. * There is a 25/33MHz switch in configuration - * register, but driver is written for use at any frequency which get - * (use idebus=xx to select PCI bus speed). + * register, but driver is written for use at any frequency. * * Version 0.1, Nov 8, 1996 * by Jaromir Koutek, for 2.1.8. |
