summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/it8172.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/it8172.c')
-rw-r--r--drivers/ide/pci/it8172.c308
1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/ide/pci/it8172.c b/drivers/ide/pci/it8172.c
new file mode 100644
index 000000000000..631927cf17d4
--- /dev/null
+++ b/drivers/ide/pci/it8172.c
@@ -0,0 +1,308 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * IT8172 IDE controller support
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * stevel@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/it8172/it8172_int.h>
+
+/*
+ * Prototypes
+ */
+static u8 it8172_ratemask (ide_drive_t *drive)
+{
+ return 1;
+}
+
+static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ int is_slave = (&hwif->drives[1] == drive);
+ unsigned long flags;
+ u16 drive_enables;
+ u32 drive_timing;
+
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ spin_lock_irqsave(&ide_lock, flags);
+ pci_read_config_word(dev, 0x40, &drive_enables);
+ pci_read_config_dword(dev, 0x44, &drive_timing);
+
+ /*
+ * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
+ * are being left at the default values of 8 PCI clocks (242 nsec
+ * for a 33 MHz clock). These can be safely shortened at higher
+ * PIO modes. The DIOR/DIOW pulse width and recovery times only
+ * apply to PIO modes, not to the DMA modes.
+ */
+
+ /*
+ * Enable port 0x44. The IT8172G spec is confused; it calls
+ * this register the "Slave IDE Timing Register", but in fact,
+ * it controls timing for both master and slave drives.
+ */
+ drive_enables |= 0x4000;
+
+ if (is_slave) {
+ drive_enables &= 0xc006;
+ if (pio > 1)
+ /* enable prefetch and IORDY sample-point */
+ drive_enables |= 0x0060;
+ } else {
+ drive_enables &= 0xc060;
+ if (pio > 1)
+ /* enable prefetch and IORDY sample-point */
+ drive_enables |= 0x0006;
+ }
+
+ pci_write_config_word(dev, 0x40, drive_enables);
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+static u8 it8172_dma_2_pio (u8 xfer_rate)
+{
+ switch(xfer_rate) {
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ case XFER_MW_DMA_2:
+ case XFER_PIO_4:
+ return 4;
+ case XFER_MW_DMA_1:
+ case XFER_PIO_3:
+ return 3;
+ case XFER_SW_DMA_2:
+ case XFER_PIO_2:
+ return 2;
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ case XFER_PIO_SLOW:
+ default:
+ return 0;
+ }
+}
+
+static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 speed = ide_rate_filter(it8172_ratemask(drive), xferspeed);
+ int a_speed = 3 << (drive->dn * 4);
+ int u_flag = 1 << drive->dn;
+ int u_speed = 0;
+ u8 reg48, reg4a;
+
+ pci_read_config_byte(dev, 0x48, &reg48);
+ pci_read_config_byte(dev, 0x4a, &reg4a);
+
+ /*
+ * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
+ * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
+ * transfers on some drives, even though both numbers meet the minimum
+ * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
+ * So the faster times are just commented out here. The good news is
+ * that the slower cycle time has very little affect on transfer
+ * performance.
+ */
+
+ switch(speed) {
+ case XFER_UDMA_4:
+ case XFER_UDMA_2: //u_speed = 2 << (drive->dn * 4); break;
+ case XFER_UDMA_5:
+ case XFER_UDMA_3:
+ case XFER_UDMA_1: //u_speed = 1 << (drive->dn * 4); break;
+ case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_2: break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_0: break;
+ default: return -1;
+ }
+
+ if (speed >= XFER_UDMA_0) {
+ pci_write_config_byte(dev, 0x48, reg48 | u_flag);
+ reg4a &= ~a_speed;
+ pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
+ } else {
+ pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
+ pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
+ }
+
+ it8172_tune_drive(drive, it8172_dma_2_pio(speed));
+ return (ide_config_drive_speed(drive, speed));
+}
+
+static int it8172_config_chipset_for_dma (ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));
+
+ if (!(speed)) {
+ u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
+ }
+
+ (void) it8172_tune_chipset(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+ drive->init_speed = 0;
+
+ if (id && (id->capability & 1) && drive->autodma) {
+
+ if (ide_use_dma(drive)) {
+ if (it8172_config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+ }
+
+ goto fast_ata_pio;
+
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+ it8172_tune_drive(drive, 5);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+ /* IORDY not supported */
+ return 0;
+}
+
+static unsigned int __init init_chipset_it8172 (struct pci_dev *dev, const char *name)
+{
+ unsigned char progif;
+
+ /*
+ * Place both IDE interfaces into PCI "native" mode
+ */
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);
+
+ return IT8172_IDE_IRQ;
+}
+
+
+static void __init init_hwif_it8172 (ide_hwif_t *hwif)
+{
+ struct pci_dev* dev = hwif->pci_dev;
+ unsigned long cmdBase, ctrlBase;
+
+ hwif->autodma = 0;
+ hwif->tuneproc = &it8172_tune_drive;
+ hwif->speedproc = &it8172_tune_chipset;
+
+ cmdBase = dev->resource[0].start;
+ ctrlBase = dev->resource[1].start;
+
+ ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL);
+ memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
+ hwif->noprobe = 0;
+
+ if (!hwif->dma_base) {
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+ return;
+ }
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x07;
+ hwif->mwdma_mask = 0x06;
+ hwif->swdma_mask = 0x04;
+
+ hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t it8172_chipsets[] __devinitdata = {
+ { /* 0 */
+ .name = "IT8172G",
+ .init_chipset = init_chipset_it8172,
+ .init_hwif = init_hwif_it8172,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
+ .bootable = ON_BOARD,
+ }
+};
+
+static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ if ((!(PCI_FUNC(dev->devfn) & 1) ||
+ (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
+ return -ENODEV; /* IT8172 is more than an IDE controller */
+ return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
+}
+
+static struct pci_device_id it8172_pci_tbl[] = {
+ { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "IT8172_IDE",
+ .id_table = it8172_pci_tbl,
+ .probe = it8172_init_one,
+};
+
+static int it8172_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(it8172_ide_init);
+
+MODULE_AUTHOR("SteveL@mvista.com");
+MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud