diff options
Diffstat (limited to 'drivers/ide/pci/cs5535.c')
| -rw-r--r-- | drivers/ide/pci/cs5535.c | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c new file mode 100644 index 000000000000..6eb305197f3c --- /dev/null +++ b/drivers/ide/pci/cs5535.c @@ -0,0 +1,305 @@ +/* + * linux/drivers/ide/pci/cs5535.c + * + * Copyright (C) 2004-2005 Advanced Micro Devices, Inc. + * + * History: + * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com> + * - Reworked tuneproc, set_drive, misc mods to prep for mainline + * - Work was sponsored by CIS (M) Sdn Bhd. + * Ported to Kernel 2.6.11 on June 26, 2005 by + * Wolfgang Zuleger <wolfgang.zuleger@gmx.de> + * Alexander Kiausch <alex.kiausch@t-online.de> + * Originally developed by AMD for 2.4/2.6 + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor/AMD. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Documentation: + * CS5535 documentation available from AMD + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ide.h> + +#include "ide-timing.h" + +#define MSR_ATAC_BASE 0x51300000 +#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) +#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) +#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) +#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) +#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) +#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) +#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) +#define ATAC_RESET (MSR_ATAC_BASE+0x10) +#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) +#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) +#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) +#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) +#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) +#define ATAC_BM0_CMD_PRIM 0x00 +#define ATAC_BM0_STS_PRIM 0x02 +#define ATAC_BM0_PRD 0x04 +#define CS5535_CABLE_DETECT 0x48 + +/* Format I PIO settings. We seperate out cmd and data for safer timings */ + +static unsigned int cs5535_pio_cmd_timings[5] = +{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 }; +static unsigned int cs5535_pio_dta_timings[5] = +{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 }; + +static unsigned int cs5535_mwdma_timings[3] = +{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 }; + +static unsigned int cs5535_udma_timings[5] = +{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 }; + +/* Macros to check if the register is the reset value - reset value is an + invalid timing and indicates the register has not been set previously */ + +#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 ) +#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 ) + +/**** + * cs5535_set_speed - Configure the chipset to the new speed + * @drive: Drive to set up + * @speed: desired speed + * + * cs5535_set_speed() configures the chipset to a new speed. + */ +static void cs5535_set_speed(ide_drive_t *drive, u8 speed) +{ + + u32 reg = 0, dummy; + int unit = drive->select.b.unit; + + + /* Set the PIO timings */ + if ((speed & XFER_MODE) == XFER_PIO) { + u8 pioa; + u8 piob; + u8 cmd; + + pioa = speed - XFER_PIO_0; + piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]), + 255, 4, NULL); + cmd = pioa < piob ? pioa : piob; + + /* Write the speed of the current drive */ + reg = (cs5535_pio_cmd_timings[cmd] << 16) | + cs5535_pio_dta_timings[pioa]; + wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0); + + /* And if nessesary - change the speed of the other drive */ + rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy); + + if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) != + cs5535_pio_cmd_timings[cmd]) { + reg &= 0x0000FFFF; + reg |= cs5535_pio_cmd_timings[cmd] << 16; + wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0); + } + + /* Set bit 31 of the DMA register for PIO format 1 timings */ + rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); + wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, + reg | 0x80000000UL, 0); + } else { + rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); + + reg &= 0x80000000UL; /* Preserve the PIO format bit */ + + if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_7) + reg |= cs5535_udma_timings[speed - XFER_UDMA_0]; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0]; + else + return; + + wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0); + } +} + +static u8 cs5535_ratemask(ide_drive_t *drive) +{ + /* eighty93 will return 1 if it's 80core and capable of + exceeding udma2, 0 otherwise. we need ratemask to set + the max speed and if we can > udma2 then we return 2 + which selects speed_max as udma4 which is the 5535's max + speed, and 1 selects udma2 which is the max for 40c */ + if (!eighty_ninty_three(drive)) + return 1; + + return 2; +} + + +/**** + * cs5535_set_drive - Configure the drive to the new speed + * @drive: Drive to set up + * @speed: desired speed + * + * cs5535_set_drive() configures the drive and the chipset to a + * new speed. It also can be called by upper layers. + */ +static int cs5535_set_drive(ide_drive_t *drive, u8 speed) +{ + speed = ide_rate_filter(cs5535_ratemask(drive), speed); + ide_config_drive_speed(drive, speed); + cs5535_set_speed(drive, speed); + + return 0; +} + +/**** + * cs5535_tuneproc - PIO setup + * @drive: drive to set up + * @pio: mode to use (255 for 'best possible') + * + * A callback from the upper layers for PIO-only tuning. + */ +static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed) +{ + u8 modes[] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, + XFER_PIO_4 }; + + /* cs5535 max pio is pio 4, best_pio will check the blacklist. + i think we don't need to rate_filter the incoming xferspeed + since we know we're only going to choose pio */ + xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL); + ide_config_drive_speed(drive, modes[xferspeed]); + cs5535_set_speed(drive, xferspeed); +} + +static int cs5535_config_drive_for_dma(ide_drive_t *drive) +{ + u8 speed; + + speed = ide_dma_speed(drive, cs5535_ratemask(drive)); + + /* If no DMA speed was available then let dma_check hit pio */ + if (!speed) { + return 0; + } + + cs5535_set_drive(drive, speed); + return ide_dma_enable(drive); +} + +static int cs5535_dma_check(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct hd_driveid *id = drive->id; + u8 speed; + + drive->init_speed = 0; + + if ((id->capability & 1) && drive->autodma) { + if (ide_use_dma(drive)) { + if (cs5535_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + speed = ide_get_best_pio_mode(drive, 255, 4, NULL); + cs5535_set_drive(drive, speed); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) +{ + u8 bit; + + /* if a 80 wire cable was detected */ + pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit); + return (bit & 1); +} + +/**** + * init_hwif_cs5535 - Initialize one ide cannel + * @hwif: Channel descriptor + * + * This gets invoked by the IDE driver once for each channel. It + * performs channel-specific pre-initialization before drive probing. + * + */ +static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) +{ + int i; + + hwif->autodma = 0; + + hwif->tuneproc = &cs5535_tuneproc; + hwif->speedproc = &cs5535_set_drive; + hwif->ide_dma_check = &cs5535_dma_check; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x1F; + hwif->mwdma_mask = 0x07; + + + hwif->udma_four = cs5535_cable_detect(hwif->pci_dev); + + if (!noautodma) + hwif->autodma = 1; + + /* just setting autotune and not worrying about bios timings */ + for (i = 0; i < 2; i++) { + hwif->drives[i].autotune = 1; + hwif->drives[i].autodma = hwif->autodma; + } +} + +static ide_pci_device_t cs5535_chipset __devinitdata = { + .name = "CS5535", + .init_hwif = init_hwif_cs5535, + .channels = 1, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit cs5535_init_one(struct pci_dev *dev, + const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &cs5535_chipset); +} + +static struct pci_device_id cs5535_pci_tbl[] = +{ + { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl); + +static struct pci_driver driver = { + .name = "CS5535_IDE", + .id_table = cs5535_pci_tbl, + .probe = cs5535_init_one, +}; + +static int __init cs5535_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cs5535_ide_init); + +MODULE_AUTHOR("AMD"); +MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE"); +MODULE_LICENSE("GPL"); |
