diff options
Diffstat (limited to 'drivers/ide/ide-iops.c')
-rw-r--r-- | drivers/ide/ide-iops.c | 45 |
1 files changed, 40 insertions, 5 deletions
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 92578b6832e9..f4cd2700cae5 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -565,6 +565,36 @@ int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 b EXPORT_SYMBOL(ide_wait_stat); +/** + * ide_in_drive_list - look for drive in black/white list + * @id: drive identifier + * @drive_table: list to inspect + * + * Look for a drive in the blacklist and the whitelist tables + * Returns 1 if the drive is found in the table. + */ + +int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) +{ + for ( ; drive_table->id_model; drive_table++) + if ((!strcmp(drive_table->id_model, id->model)) && + (!drive_table->id_firmware || + strstr(id->fw_rev, drive_table->id_firmware))) + return 1; + return 0; +} + +EXPORT_SYMBOL_GPL(ide_in_drive_list); + +/* + * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. + * We list them here and depend on the device side cable detection for them. + */ +static const struct drive_list_entry ivb_list[] = { + { "QUANTUM FIREBALLlct10 05" , "A03.0900" }, + { NULL , NULL } +}; + /* * All hosts that use the 80c ribbon must use! * The name is derived from upper byte of word 93 and the 80c ribbon. @@ -573,11 +603,16 @@ u8 eighty_ninty_three (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct hd_driveid *id = drive->id; + int ivb = ide_in_drive_list(id, ivb_list); if (hwif->cbl == ATA_CBL_PATA40_SHORT) return 1; - if (hwif->cbl != ATA_CBL_PATA80) + if (ivb) + printk(KERN_DEBUG "%s: skipping word 93 validity check\n", + drive->name); + + if (hwif->cbl != ATA_CBL_PATA80 && !ivb) goto no_80w; /* Check for SATA but only if we are ATA5 or higher */ @@ -587,11 +622,11 @@ u8 eighty_ninty_three (ide_drive_t *drive) /* * FIXME: * - change master/slave IDENTIFY order - * - force bit13 (80c cable present) check + * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ #ifndef CONFIG_IDEDMA_IVB - if (id->hw_config & 0x4000) + if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000))) #else if (id->hw_config & 0x6000) #endif @@ -795,7 +830,7 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed) hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); hwif->OUTB(speed, IDE_NSECTOR_REG); hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG); - hwif->OUTB(WIN_SETFEATURES, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG); if ((IDE_CONTROL_REG) && (drive->quirk_list == 2)) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); udelay(1); @@ -822,7 +857,7 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed) */ for (i = 0; i < 10; i++) { udelay(1); - if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), DRIVE_READY, BUSY_STAT|DRQ_STAT|ERR_STAT)) { + if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), drive->ready_stat, BUSY_STAT|DRQ_STAT|ERR_STAT)) { error = 0; break; } |