summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig3
-rw-r--r--drivers/i2c/busses/i2c-cpm.c8
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c90
-rw-r--r--drivers/i2c/busses/i2c-piix4.c3
-rw-r--r--drivers/i2c/busses/i2c-stu300.c16
-rw-r--r--drivers/i2c/i2c-core.c2
6 files changed, 36 insertions, 86 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 631736e2e7ed..527503617ee2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -150,6 +150,7 @@ config I2C_PIIX4
ATI SB700/SP5100
ATI SB800
AMD Hudson-2
+ AMD CZ
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
@@ -685,7 +686,7 @@ config I2C_SIMTEC
config I2C_SIRF
tristate "CSR SiRFprimaII I2C interface"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
help
If you say yes to this option, support will be included for the
CSR SiRFprimaII I2C interface.
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3823623baa48..9e6002108720 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -338,6 +338,14 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
tptr = 0;
rptr = 0;
+ /*
+ * If there was a collision in the last i2c transaction,
+ * Set I2COM_MASTER as it was cleared during collision.
+ */
+ if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
+ out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);
+ }
+
while (tptr < num) {
pmsg = &msgs[tptr];
dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 650293ff4d62..c7e3b0c1a1ca 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -148,10 +148,6 @@ struct i2c_nmk_client {
* @stop: stop condition.
* @xfer_complete: acknowledge completion for a I2C message.
* @result: controller propogated result.
- * @pinctrl: pinctrl handle.
- * @pins_default: default state for the pins.
- * @pins_idle: idle state for the pins.
- * @pins_sleep: sleep state for the pins.
* @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
@@ -165,11 +161,6 @@ struct nmk_i2c_dev {
int stop;
struct completion xfer_complete;
int result;
- /* Three pin states - default, idle & sleep */
- struct pinctrl *pinctrl;
- struct pinctrl_state *pins_default;
- struct pinctrl_state *pins_idle;
- struct pinctrl_state *pins_sleep;
bool busy;
};
@@ -645,13 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
}
/* Optionaly enable pins to be muxed in and configured */
- if (!IS_ERR(dev->pins_default)) {
- status = pinctrl_select_state(dev->pinctrl,
- dev->pins_default);
- if (status)
- dev_err(&dev->adev->dev,
- "could not set default pins\n");
- }
+ pinctrl_pm_select_default_state(&dev->adev->dev);
status = init_hw(dev);
if (status)
@@ -681,13 +666,7 @@ out:
clk_disable_unprepare(dev->clk);
out_clk:
/* Optionally let pins go into idle state */
- if (!IS_ERR(dev->pins_idle)) {
- status = pinctrl_select_state(dev->pinctrl,
- dev->pins_idle);
- if (status)
- dev_err(&dev->adev->dev,
- "could not set pins to idle state\n");
- }
+ pinctrl_pm_select_idle_state(&dev->adev->dev);
pm_runtime_put_sync(&dev->adev->dev);
@@ -882,41 +861,22 @@ static int nmk_i2c_suspend(struct device *dev)
{
struct amba_device *adev = to_amba_device(dev);
struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
- int ret;
if (nmk_i2c->busy)
return -EBUSY;
- if (!IS_ERR(nmk_i2c->pins_sleep)) {
- ret = pinctrl_select_state(nmk_i2c->pinctrl,
- nmk_i2c->pins_sleep);
- if (ret)
- dev_err(dev, "could not set pins to sleep state\n");
- }
+ pinctrl_pm_select_sleep_state(dev);
return 0;
}
static int nmk_i2c_resume(struct device *dev)
{
- struct amba_device *adev = to_amba_device(dev);
- struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
- int ret;
-
/* First go to the default state */
- if (!IS_ERR(nmk_i2c->pins_default)) {
- ret = pinctrl_select_state(nmk_i2c->pinctrl,
- nmk_i2c->pins_default);
- if (ret)
- dev_err(dev, "could not set pins to default state\n");
- }
+ pinctrl_pm_select_default_state(dev);
/* Then let's idle the pins until the next transfer happens */
- if (!IS_ERR(nmk_i2c->pins_idle)) {
- ret = pinctrl_select_state(nmk_i2c->pinctrl,
- nmk_i2c->pins_idle);
- if (ret)
- dev_err(dev, "could not set pins to idle state\n");
- }
+ pinctrl_pm_select_idle_state(dev);
+
return 0;
}
#else
@@ -1004,39 +964,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
dev->adev = adev;
amba_set_drvdata(adev, dev);
- dev->pinctrl = devm_pinctrl_get(&adev->dev);
- if (IS_ERR(dev->pinctrl)) {
- ret = PTR_ERR(dev->pinctrl);
- goto err_pinctrl;
- }
-
- dev->pins_default = pinctrl_lookup_state(dev->pinctrl,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(dev->pins_default)) {
- dev_err(&adev->dev, "could not get default pinstate\n");
- } else {
- ret = pinctrl_select_state(dev->pinctrl,
- dev->pins_default);
- if (ret)
- dev_dbg(&adev->dev, "could not set default pinstate\n");
- }
-
- dev->pins_idle = pinctrl_lookup_state(dev->pinctrl,
- PINCTRL_STATE_IDLE);
- if (IS_ERR(dev->pins_idle)) {
- dev_dbg(&adev->dev, "could not get idle pinstate\n");
- } else {
- /* If possible, let's go to idle until the first transfer */
- ret = pinctrl_select_state(dev->pinctrl,
- dev->pins_idle);
- if (ret)
- dev_dbg(&adev->dev, "could not set idle pinstate\n");
- }
-
- dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(dev->pins_sleep))
- dev_dbg(&adev->dev, "could not get sleep pinstate\n");
+ /* Select default pin state */
+ pinctrl_pm_select_default_state(&adev->dev);
+ /* If possible, let's go to idle until the first transfer */
+ pinctrl_pm_select_idle_state(&adev->dev);
dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
if (!dev->virtbase) {
@@ -1106,7 +1037,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
iounmap(dev->virtbase);
err_no_ioremap:
kfree(dev);
- err_pinctrl:
err_no_mem:
return ret;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 39ab78c1a02c..d05ad590af29 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
- AMD Hudson-2
+ AMD Hudson-2, CZ
SMSC Victory66
Note: we assume there can only be one device, with one or more
@@ -522,6 +522,7 @@ static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_OSB4) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 0a6f941133f6..d1a6b204af00 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of_i2c.h>
/* the name of this kernel module */
#define NAME "stu300"
@@ -867,7 +868,6 @@ stu300_probe(struct platform_device *pdev)
struct resource *res;
int bus_nr;
int ret = 0;
- char clk_name[] = "I2C0";
dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
if (!dev) {
@@ -876,8 +876,7 @@ stu300_probe(struct platform_device *pdev)
}
bus_nr = pdev->id;
- clk_name[3] += (char)bus_nr;
- dev->clk = devm_clk_get(&pdev->dev, clk_name);
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
return PTR_ERR(dev->clk);
@@ -923,6 +922,7 @@ stu300_probe(struct platform_device *pdev)
adap->nr = bus_nr;
adap->algo = &stu300_algo;
adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
i2c_set_adapdata(adap, dev);
/* i2c device drivers may be active on return from add_adapter() */
@@ -934,6 +934,10 @@ stu300_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, dev);
+ dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
+ dev->virtbase, dev->irq);
+ of_i2c_register_devices(adap);
+
return 0;
}
@@ -978,11 +982,17 @@ stu300_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id stu300_dt_match[] = {
+ { .compatible = "st,ddci2c" },
+ {},
+};
+
static struct platform_driver stu300_i2c_driver = {
.driver = {
.name = NAME,
.owner = THIS_MODULE,
.pm = STU300_I2C_PM,
+ .of_match_table = stu300_dt_match,
},
.remove = __exit_p(stu300_remove),
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 48e31ed69dbf..f32ca293ae0e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -435,7 +435,7 @@ static const struct dev_pm_ops i2c_device_pm_ops = {
SET_RUNTIME_PM_OPS(
pm_generic_runtime_suspend,
pm_generic_runtime_resume,
- pm_generic_runtime_idle
+ NULL
)
};
OpenPOWER on IntegriCloud