diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-omap.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 36 |
1 files changed, 17 insertions, 19 deletions
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index db31eaed6ea5..3525c9e62cb0 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,7 +43,6 @@ #include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> -#include <linux/pm_qos.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -187,8 +186,9 @@ struct omap_i2c_dev { int reg_shift; /* bit shift for I2C register addresses */ struct completion cmd_complete; struct resource *ioarea; - u32 latency; /* maximum MPU wkup latency */ - struct pm_qos_request pm_qos_request; + u32 latency; /* maximum mpu wkup latency */ + void (*set_mpu_wkup_lat)(struct device *dev, + long latency); u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->threshold) / + (1000 * dev->speed / 8); } /* @@ -522,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, dev->buf = msg->buf; dev->buf_len = msg->len; + /* make sure writes to dev->buf_len are ordered */ + barrier(); + omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); /* Clear the FIFO Buffers */ @@ -579,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, */ timeout = wait_for_completion_timeout(&dev->cmd_complete, OMAP_I2C_TIMEOUT); - dev->buf_len = 0; if (timeout == 0) { dev_err(dev->dev, "controller timed out\n"); omap_i2c_init(dev); @@ -629,16 +633,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - */ - if (dev->latency) - pm_qos_add_request(&dev->pm_qos_request, - PM_QOS_CPU_DMA_LATENCY, - dev->latency); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -646,8 +642,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->latency) - pm_qos_remove_request(&dev->pm_qos_request); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, -1); if (r == 0) r = num; @@ -1104,6 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; + dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1159,8 +1156,9 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ |
