summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm')
-rw-r--r--drivers/gpu/drm/drm_cache.c23
-rw-r--r--drivers/gpu/drm/i915/i915_debugfs.c91
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c85
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c88
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h74
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c824
-rw-r--r--drivers/gpu/drm/i915/i915_gem_execbuffer.c94
-rw-r--r--drivers/gpu/drm/i915/i915_gem_gtt.c69
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c450
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h374
-rw-r--r--drivers/gpu/drm/i915/intel_acpi.c2
-rw-r--r--drivers/gpu/drm/i915/intel_bios.c45
-rw-r--r--drivers/gpu/drm/i915/intel_crt.c16
-rw-r--r--drivers/gpu/drm/i915/intel_display.c784
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h17
-rw-r--r--drivers/gpu/drm/i915/intel_dvo.c6
-rw-r--r--drivers/gpu/drm/i915/intel_hdmi.c46
-rw-r--r--drivers/gpu/drm/i915/intel_i2c.c295
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c11
-rw-r--r--drivers/gpu/drm/i915/intel_modes.c3
-rw-r--r--drivers/gpu/drm/i915/intel_opregion.c4
-rw-r--r--drivers/gpu/drm/i915/intel_panel.c28
-rw-r--r--drivers/gpu/drm/i915/intel_ringbuffer.c92
-rw-r--r--drivers/gpu/drm/i915/intel_ringbuffer.h1
-rw-r--r--drivers/gpu/drm/i915/intel_sdvo.c51
-rw-r--r--drivers/gpu/drm/i915/intel_tv.c9
26 files changed, 2449 insertions, 1133 deletions
diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c
index 4b8653b932f9..08758e061478 100644
--- a/drivers/gpu/drm/drm_cache.c
+++ b/drivers/gpu/drm/drm_cache.c
@@ -98,3 +98,26 @@ drm_clflush_pages(struct page *pages[], unsigned long num_pages)
#endif
}
EXPORT_SYMBOL(drm_clflush_pages);
+
+void
+drm_clflush_virt_range(char *addr, unsigned long length)
+{
+#if defined(CONFIG_X86)
+ if (cpu_has_clflush) {
+ char *end = addr + length;
+ mb();
+ for (; addr < end; addr += boot_cpu_data.x86_clflush_size)
+ clflush(addr);
+ clflush(end - 1);
+ mb();
+ return;
+ }
+
+ if (on_each_cpu(drm_clflush_ipi_handler, NULL, 1) != 0)
+ printk(KERN_ERR "Timed out waiting for cache flush.\n");
+#else
+ printk(KERN_ERR "Architecture has no drm_cache.c support\n");
+ WARN_ON_ONCE(1);
+#endif
+}
+EXPORT_SYMBOL(drm_clflush_virt_range);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index b505b70dba05..967fb928c577 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -468,7 +468,45 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
if (ret)
return ret;
- if (!HAS_PCH_SPLIT(dev)) {
+ if (IS_VALLEYVIEW(dev)) {
+ seq_printf(m, "Display IER:\t%08x\n",
+ I915_READ(VLV_IER));
+ seq_printf(m, "Display IIR:\t%08x\n",
+ I915_READ(VLV_IIR));
+ seq_printf(m, "Display IIR_RW:\t%08x\n",
+ I915_READ(VLV_IIR_RW));
+ seq_printf(m, "Display IMR:\t%08x\n",
+ I915_READ(VLV_IMR));
+ for_each_pipe(pipe)
+ seq_printf(m, "Pipe %c stat:\t%08x\n",
+ pipe_name(pipe),
+ I915_READ(PIPESTAT(pipe)));
+
+ seq_printf(m, "Master IER:\t%08x\n",
+ I915_READ(VLV_MASTER_IER));
+
+ seq_printf(m, "Render IER:\t%08x\n",
+ I915_READ(GTIER));
+ seq_printf(m, "Render IIR:\t%08x\n",
+ I915_READ(GTIIR));
+ seq_printf(m, "Render IMR:\t%08x\n",
+ I915_READ(GTIMR));
+
+ seq_printf(m, "PM IER:\t\t%08x\n",
+ I915_READ(GEN6_PMIER));
+ seq_printf(m, "PM IIR:\t\t%08x\n",
+ I915_READ(GEN6_PMIIR));
+ seq_printf(m, "PM IMR:\t\t%08x\n",
+ I915_READ(GEN6_PMIMR));
+
+ seq_printf(m, "Port hotplug:\t%08x\n",
+ I915_READ(PORT_HOTPLUG_EN));
+ seq_printf(m, "DPFLIPSTAT:\t%08x\n",
+ I915_READ(VLV_DPFLIPSTAT));
+ seq_printf(m, "DPINVGTT:\t%08x\n",
+ I915_READ(DPINVGTT));
+
+ } else if (!HAS_PCH_SPLIT(dev)) {
seq_printf(m, "Interrupt enable: %08x\n",
I915_READ(IER));
seq_printf(m, "Interrupt identity: %08x\n",
@@ -704,6 +742,7 @@ static void i915_ring_error_state(struct seq_file *m,
struct drm_i915_error_state *error,
unsigned ring)
{
+ BUG_ON(ring >= I915_NUM_RINGS); /* shut up confused gcc */
seq_printf(m, "%s command stream:\n", ring_str(ring));
seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]);
seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]);
@@ -718,8 +757,8 @@ static void i915_ring_error_state(struct seq_file *m,
if (INTEL_INFO(dev)->gen >= 4)
seq_printf(m, " INSTPS: 0x%08x\n", error->instps[ring]);
seq_printf(m, " INSTPM: 0x%08x\n", error->instpm[ring]);
+ seq_printf(m, " FADDR: 0x%08x\n", error->faddr[ring]);
if (INTEL_INFO(dev)->gen >= 6) {
- seq_printf(m, " FADDR: 0x%08x\n", error->faddr[ring]);
seq_printf(m, " FAULT_REG: 0x%08x\n", error->fault_reg[ring]);
seq_printf(m, " SYNC_0: 0x%08x\n",
error->semaphore_mboxes[ring][0]);
@@ -1502,6 +1541,53 @@ static int i915_ppgtt_info(struct seq_file *m, void *data)
return 0;
}
+static int i915_dpio_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
+
+
+ if (!IS_VALLEYVIEW(dev)) {
+ seq_printf(m, "unsupported\n");
+ return 0;
+ }
+
+ ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+ if (ret)
+ return ret;
+
+ seq_printf(m, "DPIO_CTL: 0x%08x\n", I915_READ(DPIO_CTL));
+
+ seq_printf(m, "DPIO_DIV_A: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_DIV_A));
+ seq_printf(m, "DPIO_DIV_B: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_DIV_B));
+
+ seq_printf(m, "DPIO_REFSFR_A: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_REFSFR_A));
+ seq_printf(m, "DPIO_REFSFR_B: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_REFSFR_B));
+
+ seq_printf(m, "DPIO_CORE_CLK_A: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_CORE_CLK_A));
+ seq_printf(m, "DPIO_CORE_CLK_B: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_CORE_CLK_B));
+
+ seq_printf(m, "DPIO_LFP_COEFF_A: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_LFP_COEFF_A));
+ seq_printf(m, "DPIO_LFP_COEFF_B: 0x%08x\n",
+ intel_dpio_read(dev_priv, _DPIO_LFP_COEFF_B));
+
+ seq_printf(m, "DPIO_FASTCLK_DISABLE: 0x%08x\n",
+ intel_dpio_read(dev_priv, DPIO_FASTCLK_DISABLE));
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return 0;
+}
+
static ssize_t
i915_wedged_read(struct file *filp,
char __user *ubuf,
@@ -1836,6 +1922,7 @@ static struct drm_info_list i915_debugfs_list[] = {
{"i915_gen6_forcewake_count", i915_gen6_forcewake_count_info, 0},
{"i915_swizzle_info", i915_swizzle_info, 0},
{"i915_ppgtt_info", i915_ppgtt_info, 0},
+ {"i915_dpio", i915_dpio_info, 0},
};
#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 785f67f963ef..652f43f00ef2 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -26,6 +26,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
@@ -43,6 +45,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <acpi/video.h>
+#include <asm/pat.h>
static void i915_write_hws_pga(struct drm_device *dev)
{
@@ -787,6 +790,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
case I915_PARAM_HAS_LLC:
value = HAS_LLC(dev);
break;
+ case I915_PARAM_HAS_ALIASING_PPGTT:
+ value = dev_priv->mm.aliasing_ppgtt ? 1 : 0;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
@@ -1158,14 +1164,14 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
- printk(KERN_INFO "i915: switched on\n");
+ pr_info("switched on\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
i915_resume(dev);
dev->switch_power_state = DRM_SWITCH_POWER_ON;
} else {
- printk(KERN_ERR "i915: switched off\n");
+ pr_err("switched off\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
i915_suspend(dev, pmm);
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
@@ -1216,10 +1222,8 @@ static int i915_load_gem_init(struct drm_device *dev)
/* PPGTT pdes are stolen from global gtt ptes, so shrink the
* aperture accordingly when using aliasing ppgtt. */
gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
- /* For paranoia keep the guard page in between. */
- gtt_size -= PAGE_SIZE;
- i915_gem_do_init(dev, 0, mappable_size, gtt_size);
+ i915_gem_init_global_gtt(dev, 0, mappable_size, gtt_size);
ret = i915_gem_init_aliasing_ppgtt(dev);
if (ret) {
@@ -1237,7 +1241,8 @@ static int i915_load_gem_init(struct drm_device *dev)
* should be enough to keep any prefetching inside of the
* aperture.
*/
- i915_gem_do_init(dev, 0, mappable_size, gtt_size - PAGE_SIZE);
+ i915_gem_init_global_gtt(dev, 0, mappable_size,
+ gtt_size);
}
ret = i915_gem_init_hw(dev);
@@ -1931,6 +1936,29 @@ ips_ping_for_i915_load(void)
}
}
+static void
+i915_mtrr_setup(struct drm_i915_private *dev_priv, unsigned long base,
+ unsigned long size)
+{
+ dev_priv->mm.gtt_mtrr = -1;
+
+#if defined(CONFIG_X86_PAT)
+ if (cpu_has_pat)
+ return;
+#endif
+
+ /* Set up a WC MTRR for non-PAT systems. This is more common than
+ * one would think, because the kernel disables PAT on first
+ * generation Core chips because WC PAT gets overridden by a UC
+ * MTRR if present. Even if a UC MTRR isn't present.
+ */
+ dev_priv->mm.gtt_mtrr = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+ if (dev_priv->mm.gtt_mtrr < 0) {
+ DRM_INFO("MTRR allocation failed. Graphics "
+ "performance may suffer.\n");
+ }
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
@@ -1945,8 +1973,16 @@ ips_ping_for_i915_load(void)
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv;
+ struct intel_device_info *info;
int ret = 0, mmio_bar;
- uint32_t agp_size;
+ uint32_t aperture_size;
+
+ info = (struct intel_device_info *) flags;
+
+ /* Refuse to load on gen6+ without kms enabled. */
+ if (info->gen >= 6 && !drm_core_check_feature(dev, DRIVER_MODESET))
+ return -ENODEV;
+
/* i915 has 4 more counters */
dev->counters += 4;
@@ -1961,7 +1997,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
- dev_priv->info = (struct intel_device_info *) flags;
+ dev_priv->info = info;
if (i915_get_bridge_dev(dev)) {
ret = -EIO;
@@ -2000,27 +2036,16 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
goto out_rmmap;
}
- agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+ aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
- io_mapping_create_wc(dev->agp->base, agp_size);
+ io_mapping_create_wc(dev->agp->base, aperture_size);
if (dev_priv->mm.gtt_mapping == NULL) {
ret = -EIO;
goto out_rmmap;
}
- /* Set up a WC MTRR for non-PAT systems. This is more common than
- * one would think, because the kernel disables PAT on first
- * generation Core chips because WC PAT gets overridden by a UC
- * MTRR if present. Even if a UC MTRR isn't present.
- */
- dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base,
- agp_size,
- MTRR_TYPE_WRCOMB, 1);
- if (dev_priv->mm.gtt_mtrr < 0) {
- DRM_INFO("MTRR allocation failed. Graphics "
- "performance may suffer.\n");
- }
+ i915_mtrr_setup(dev_priv, dev->agp->base, aperture_size);
/* The i915 workqueue is primarily used for batched retirement of
* requests (and thus managing bo) once the task has been completed
@@ -2272,7 +2297,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file)
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*
- * Additionally, in the non-mode setting case, we'll tear down the AGP
+ * Additionally, in the non-mode setting case, we'll tear down the GTT
* and DMA structures, since the kernel won't be using them, and clea
* up any GEM state.
*/
@@ -2350,16 +2375,10 @@ struct drm_ioctl_desc i915_ioctls[] = {
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
-/**
- * Determine if the device really is AGP or not.
- *
- * All Intel graphics chipsets are treated as AGP, even if they are really
- * PCI-e.
- *
- * \param dev The device to be tested.
- *
- * \returns
- * A value of 1 is always retured to indictate every i9x5 is AGP.
+/*
+ * This is really ugly: Because old userspace abused the linux agp interface to
+ * manage the gtt, we need to claim that all intel devices are agp. For
+ * otherwise the drm core refuses to initialize the agp support code.
*/
int i915_driver_device_is_agp(struct drm_device * dev)
{
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index dfa55e7478fb..c33b0a41a73d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -84,6 +84,12 @@ MODULE_PARM_DESC(lvds_downclock,
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
+int i915_lvds_channel_mode __read_mostly;
+module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
+MODULE_PARM_DESC(lvds_channel_mode,
+ "Specify LVDS channel mode "
+ "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
+
int i915_panel_use_ssc __read_mostly = -1;
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
@@ -93,8 +99,8 @@ MODULE_PARM_DESC(lvds_use_ssc,
int i915_vbt_sdvo_panel_type __read_mostly = -1;
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
- "Override selection of SDVO panel mode in the VBT "
- "(default: auto)");
+ "Override/Ignore selection of SDVO panel mode in the VBT "
+ "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
static bool i915_try_reset __read_mostly = true;
module_param_named(reset, i915_try_reset, bool, 0600);
@@ -209,6 +215,7 @@ static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
+ .has_pch_split = 1,
};
static const struct intel_device_info intel_ironlake_m_info = {
@@ -216,6 +223,7 @@ static const struct intel_device_info intel_ironlake_m_info = {
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.has_bsd_ring = 1,
+ .has_pch_split = 1,
};
static const struct intel_device_info intel_sandybridge_d_info = {
@@ -224,6 +232,7 @@ static const struct intel_device_info intel_sandybridge_d_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
+ .has_pch_split = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
@@ -233,6 +242,7 @@ static const struct intel_device_info intel_sandybridge_m_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
+ .has_pch_split = 1,
};
static const struct intel_device_info intel_ivybridge_d_info = {
@@ -241,6 +251,7 @@ static const struct intel_device_info intel_ivybridge_d_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
+ .has_pch_split = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
@@ -250,6 +261,43 @@ static const struct intel_device_info intel_ivybridge_m_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
+ .has_pch_split = 1,
+};
+
+static const struct intel_device_info intel_valleyview_m_info = {
+ .gen = 7, .is_mobile = 1,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .has_fbc = 0,
+ .has_bsd_ring = 1,
+ .has_blt_ring = 1,
+ .is_valleyview = 1,
+};
+
+static const struct intel_device_info intel_valleyview_d_info = {
+ .gen = 7,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .has_fbc = 0,
+ .has_bsd_ring = 1,
+ .has_blt_ring = 1,
+ .is_valleyview = 1,
+};
+
+static const struct intel_device_info intel_haswell_d_info = {
+ .is_haswell = 1, .gen = 7,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .has_bsd_ring = 1,
+ .has_blt_ring = 1,
+ .has_llc = 1,
+ .has_pch_split = 1,
+};
+
+static const struct intel_device_info intel_haswell_m_info = {
+ .is_haswell = 1, .gen = 7, .is_mobile = 1,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .has_bsd_ring = 1,
+ .has_blt_ring = 1,
+ .has_llc = 1,
+ .has_pch_split = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
@@ -308,6 +356,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
#define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
+#define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00
void intel_detect_pch(struct drm_device *dev)
{
@@ -336,6 +385,9 @@ void intel_detect_pch(struct drm_device *dev)
/* PantherPoint is CPT compatible */
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found PatherPoint PCH\n");
+ } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_LPT;
+ DRM_DEBUG_KMS("Found LynxPoint PCH\n");
}
}
pci_dev_put(pch);
@@ -446,6 +498,31 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
return ret;
}
+void vlv_force_wake_get(struct drm_i915_private *dev_priv)
+{
+ int count;
+
+ count = 0;
+
+ /* Already awake? */
+ if ((I915_READ(0x130094) & 0xa1) == 0xa1)
+ return;
+
+ I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
+ POSTING_READ(FORCEWAKE_VLV);
+
+ count = 0;
+ while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0)
+ udelay(10);
+}
+
+void vlv_force_wake_put(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffff0000);
+ /* FIXME: confirm VLV behavior with Punit folks */
+ POSTING_READ(FORCEWAKE_VLV);
+}
+
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -993,6 +1070,13 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");
+/* We give fast paths for the really cool registers */
+#define NEEDS_FORCE_WAKE(dev_priv, reg) \
+ (((dev_priv)->info->gen >= 6) && \
+ ((reg) < 0x40000) && \
+ ((reg) != FORCEWAKE)) && \
+ (!IS_VALLEYVIEW((dev_priv)->dev))
+
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
u##x val = 0; \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5fabc6c31fec..92e496afc6f4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -63,6 +63,16 @@ enum plane {
};
#define plane_name(p) ((p) + 'A')
+enum port {
+ PORT_A = 0,
+ PORT_B,
+ PORT_C,
+ PORT_D,
+ PORT_E,
+ I915_MAX_PORTS
+};
+#define port_name(p) ((p) + 'A')
+
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
#define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++)
@@ -255,6 +265,9 @@ struct intel_device_info {
u8 is_broadwater:1;
u8 is_crestline:1;
u8 is_ivybridge:1;
+ u8 is_valleyview:1;
+ u8 has_pch_split:1;
+ u8 is_haswell:1;
u8 has_fbc:1;
u8 has_pipe_cxsr:1;
u8 has_hotplug:1;
@@ -291,10 +304,12 @@ enum no_fbc_reason {
enum intel_pch {
PCH_IBX, /* Ibexpeak PCH */
PCH_CPT, /* Cougarpoint PCH */
+ PCH_LPT, /* Lynxpoint PCH */
};
#define QUIRK_PIPEA_FORCE (1<<0)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
+#define QUIRK_INVERT_BRIGHTNESS (1<<2)
struct intel_fbdev;
struct intel_fbc_work;
@@ -302,7 +317,6 @@ struct intel_fbc_work;
struct intel_gmbus {
struct i2c_adapter adapter;
bool force_bit;
- bool has_gpio;
u32 reg0;
u32 gpio_reg;
struct i2c_algo_bit_data bit_algo;
@@ -326,12 +340,17 @@ typedef struct drm_i915_private {
/** gt_lock is also taken in irq contexts. */
struct spinlock gt_lock;
- struct intel_gmbus *gmbus;
+ struct intel_gmbus gmbus[GMBUS_NUM_PORTS];
/** gmbus_mutex protects against concurrent usage of the single hw gmbus
* controller on different i2c buses. */
struct mutex gmbus_mutex;
+ /**
+ * Base address of the gmbus and gpio block.
+ */
+ uint32_t gpio_mmio_base;
+
struct pci_dev *bridge_dev;
struct intel_ring_buffer ring[I915_NUM_RINGS];
uint32_t next_seqno;
@@ -354,6 +373,10 @@ typedef struct drm_i915_private {
/* protects the irq masks */
spinlock_t irq_lock;
+
+ /* DPIO indirect register protection */
+ spinlock_t dpio_lock;
+
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 pipestat[2];
u32 irq_mask;
@@ -405,6 +428,8 @@ typedef struct drm_i915_private {
unsigned int lvds_use_ssc:1;
unsigned int display_clock_mode:1;
int lvds_ssc_freq;
+ unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
+ unsigned int lvds_val; /* used for checking LVDS channel mode */
struct {
int rate;
int lanes;
@@ -881,6 +906,7 @@ struct drm_i915_gem_object {
unsigned int cache_level:2;
unsigned int has_aliasing_ppgtt_mapping:1;
+ unsigned int has_global_gtt_mapping:1;
struct page **pages;
@@ -918,13 +944,6 @@ struct drm_i915_gem_object {
/** Record of address bit 17 of each page at last unbind. */
unsigned long *bit_17;
-
- /**
- * If present, while GEM_DOMAIN_CPU is in the read domain this array
- * flags which individual pages are valid.
- */
- uint8_t *page_cpu_valid;
-
/** User space pin count and filp owning the pin */
uint32_t user_pin_count;
struct drm_file *pin_filp;
@@ -1001,6 +1020,8 @@ struct drm_i915_file_private {
#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
#define IS_IVYBRIDGE(dev) (INTEL_INFO(dev)->is_ivybridge)
+#define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview)
+#define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell)
#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
/*
@@ -1044,10 +1065,11 @@ struct drm_i915_file_private {
#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
-#define HAS_PCH_SPLIT(dev) (IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev))
+#define HAS_PCH_SPLIT(dev) (INTEL_INFO(dev)->has_pch_split)
#define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5)
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
+#define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
@@ -1081,6 +1103,7 @@ extern int i915_panel_ignore_lid __read_mostly;
extern unsigned int i915_powersave __read_mostly;
extern int i915_semaphores __read_mostly;
extern unsigned int i915_lvds_downclock __read_mostly;
+extern int i915_lvds_channel_mode __read_mostly;
extern int i915_panel_use_ssc __read_mostly;
extern int i915_vbt_sdvo_panel_type __read_mostly;
extern int i915_enable_rc6 __read_mostly;
@@ -1264,10 +1287,6 @@ int __must_check i915_gem_init_hw(struct drm_device *dev);
void i915_gem_init_swizzling(struct drm_device *dev);
void i915_gem_init_ppgtt(struct drm_device *dev);
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
-void i915_gem_do_init(struct drm_device *dev,
- unsigned long start,
- unsigned long mappable_end,
- unsigned long end);
int __must_check i915_gpu_idle(struct drm_device *dev, bool do_retire);
int __must_check i915_gem_idle(struct drm_device *dev);
int __must_check i915_add_request(struct intel_ring_buffer *ring,
@@ -1281,6 +1300,8 @@ int __must_check
i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj,
bool write);
int __must_check
+i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write);
+int __must_check
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
struct intel_ring_buffer *pipelined);
@@ -1311,10 +1332,15 @@ void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt,
struct drm_i915_gem_object *obj);
void i915_gem_restore_gtt_mappings(struct drm_device *dev);
-int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj);
-void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
+int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj);
+void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level);
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
+void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj);
+void i915_gem_init_global_gtt(struct drm_device *dev,
+ unsigned long start,
+ unsigned long mappable_end,
+ unsigned long end);
/* i915_gem_evict.c */
int __must_check i915_gem_evict_something(struct drm_device *dev, int min_size,
@@ -1357,6 +1383,13 @@ extern int i915_restore_state(struct drm_device *dev);
/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
extern void intel_teardown_gmbus(struct drm_device *dev);
+extern inline bool intel_gmbus_is_port_valid(unsigned port)
+{
+ return (port >= GMBUS_PORT_SSC && port <= GMBUS_PORT_DPD);
+}
+
+extern struct i2c_adapter *intel_gmbus_get_adapter(
+ struct drm_i915_private *dev_priv, unsigned port);
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
@@ -1409,6 +1442,9 @@ extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv);
+extern void vlv_force_wake_get(struct drm_i915_private *dev_priv);
+extern void vlv_force_wake_put(struct drm_i915_private *dev_priv);
+
/* overlay */
#ifdef CONFIG_DEBUG_FS
extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
@@ -1450,12 +1486,6 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
-/* We give fast paths for the really cool registers */
-#define NEEDS_FORCE_WAKE(dev_priv, reg) \
- (((dev_priv)->info->gen >= 6) && \
- ((reg) < 0x40000) && \
- ((reg) != FORCEWAKE))
-
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 4c65c639f772..b851bd34ca18 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -39,12 +39,6 @@
static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
-static __must_check int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj,
- bool write);
-static __must_check int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
- uint64_t offset,
- uint64_t size);
-static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj);
static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
unsigned alignment,
bool map_and_fenceable);
@@ -125,25 +119,6 @@ i915_gem_object_is_inactive(struct drm_i915_gem_object *obj)
return obj->gtt_space && !obj->active && obj->pin_count == 0;
}
-void i915_gem_do_init(struct drm_device *dev,
- unsigned long start,
- unsigned long mappable_end,
- unsigned long end)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- drm_mm_init(&dev_priv->mm.gtt_space, start, end - start);
-
- dev_priv->mm.gtt_start = start;
- dev_priv->mm.gtt_mappable_end = mappable_end;
- dev_priv->mm.gtt_end = end;
- dev_priv->mm.gtt_total = end - start;
- dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
-
- /* Take over this portion of the GTT */
- intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE);
-}
-
int
i915_gem_init_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
@@ -154,8 +129,13 @@ i915_gem_init_ioctl(struct drm_device *dev, void *data,
(args->gtt_end | args->gtt_start) & (PAGE_SIZE - 1))
return -EINVAL;
+ /* GEM with user mode setting was never supported on ilk and later. */
+ if (INTEL_INFO(dev)->gen >= 5)
+ return -ENODEV;
+
mutex_lock(&dev->struct_mutex);
- i915_gem_do_init(dev, args->gtt_start, args->gtt_end, args->gtt_end);
+ i915_gem_init_global_gtt(dev, args->gtt_start,
+ args->gtt_end, args->gtt_end);
mutex_unlock(&dev->struct_mutex);
return 0;
@@ -259,66 +239,6 @@ static int i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
obj->tiling_mode != I915_TILING_NONE;
}
-/**
- * This is the fast shmem pread path, which attempts to copy_from_user directly
- * from the backing pages of the object to the user's address space. On a
- * fault, it fails so we can fall back to i915_gem_shmem_pwrite_slow().
- */
-static int
-i915_gem_shmem_pread_fast(struct drm_device *dev,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_pread *args,
- struct drm_file *file)
-{
- struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
- ssize_t remain;
- loff_t offset;
- char __user *user_data;
- int page_offset, page_length;
-
- user_data = (char __user *) (uintptr_t) args->data_ptr;
- remain = args->size;
-
- offset = args->offset;
-
- while (remain > 0) {
- struct page *page;
- char *vaddr;
- int ret;
-
- /* Operation in this page
- *
- * page_offset = offset within page
- * page_length = bytes to copy for this page
- */
- page_offset = offset_in_page(offset);
- page_length = remain;
- if ((page_offset + remain) > PAGE_SIZE)
- page_length = PAGE_SIZE - page_offset;
-
- page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
- if (IS_ERR(page))
- return PTR_ERR(page);
-
- vaddr = kmap_atomic(page);
- ret = __copy_to_user_inatomic(user_data,
- vaddr + page_offset,
- page_length);
- kunmap_atomic(vaddr);
-
- mark_page_accessed(page);
- page_cache_release(page);
- if (ret)
- return -EFAULT;
-
- remain -= page_length;
- user_data += page_length;
- offset += page_length;
- }
-
- return 0;
-}
-
static inline int
__copy_to_user_swizzled(char __user *cpu_vaddr,
const char *gpu_vaddr, int gpu_offset,
@@ -371,37 +291,121 @@ __copy_from_user_swizzled(char __user *gpu_vaddr, int gpu_offset,
return 0;
}
-/**
- * This is the fallback shmem pread path, which allocates temporary storage
- * in kernel space to copy_to_user into outside of the struct_mutex, so we
- * can copy out of the object's backing pages while holding the struct mutex
- * and not take page faults.
- */
+/* Per-page copy function for the shmem pread fastpath.
+ * Flushes invalid cachelines before reading the target if
+ * needs_clflush is set. */
static int
-i915_gem_shmem_pread_slow(struct drm_device *dev,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_pread *args,
- struct drm_file *file)
+shmem_pread_fast(struct page *page, int shmem_page_offset, int page_length,
+ char __user *user_data,
+ bool page_do_bit17_swizzling, bool needs_clflush)
+{
+ char *vaddr;
+ int ret;
+
+ if (unlikely(page_do_bit17_swizzling))
+ return -EINVAL;
+
+ vaddr = kmap_atomic(page);
+ if (needs_clflush)
+ drm_clflush_virt_range(vaddr + shmem_page_offset,
+ page_length);
+ ret = __copy_to_user_inatomic(user_data,
+ vaddr + shmem_page_offset,
+ page_length);
+ kunmap_atomic(vaddr);
+
+ return ret;
+}
+
+static void
+shmem_clflush_swizzled_range(char *addr, unsigned long length,
+ bool swizzled)
+{
+ if (unlikely(swizzled)) {
+ unsigned long start = (unsigned long) addr;
+ unsigned long end = (unsigned long) addr + length;
+
+ /* For swizzling simply ensure that we always flush both
+ * channels. Lame, but simple and it works. Swizzled
+ * pwrite/pread is far from a hotpath - current userspace
+ * doesn't use it at all. */
+ start = round_down(start, 128);
+ end = round_up(end, 128);
+
+ drm_clflush_virt_range((void *)start, end - start);
+ } else {
+ drm_clflush_virt_range(addr, length);
+ }
+
+}
+
+/* Only difference to the fast-path function is that this can handle bit17
+ * and uses non-atomic copy and kmap functions. */
+static int
+shmem_pread_slow(struct page *page, int shmem_page_offset, int page_length,
+ char __user *user_data,
+ bool page_do_bit17_swizzling, bool needs_clflush)
+{
+ char *vaddr;
+ int ret;
+
+ vaddr = kmap(page);
+ if (needs_clflush)
+ shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
+ page_length,
+ page_do_bit17_swizzling);
+
+ if (page_do_bit17_swizzling)
+ ret = __copy_to_user_swizzled(user_data,
+ vaddr, shmem_page_offset,
+ page_length);
+ else
+ ret = __copy_to_user(user_data,
+ vaddr + shmem_page_offset,
+ page_length);
+ kunmap(page);
+
+ return ret;
+}
+
+static int
+i915_gem_shmem_pread(struct drm_device *dev,
+ struct drm_i915_gem_object *obj,
+ struct drm_i915_gem_pread *args,
+ struct drm_file *file)
{
struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
char __user *user_data;
ssize_t remain;
loff_t offset;
- int shmem_page_offset, page_length, ret;
+ int shmem_page_offset, page_length, ret = 0;
int obj_do_bit17_swizzling, page_do_bit17_swizzling;
+ int hit_slowpath = 0;
+ int prefaulted = 0;
+ int needs_clflush = 0;
+ int release_page;
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
- offset = args->offset;
+ if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)) {
+ /* If we're not in the cpu read domain, set ourself into the gtt
+ * read domain and manually flush cachelines (if required). This
+ * optimizes for the case when the gpu will dirty the data
+ * anyway again before the next pread happens. */
+ if (obj->cache_level == I915_CACHE_NONE)
+ needs_clflush = 1;
+ ret = i915_gem_object_set_to_gtt_domain(obj, false);
+ if (ret)
+ return ret;
+ }
- mutex_unlock(&dev->struct_mutex);
+ offset = args->offset;
while (remain > 0) {
struct page *page;
- char *vaddr;
/* Operation in this page
*
@@ -413,28 +417,51 @@ i915_gem_shmem_pread_slow(struct drm_device *dev,
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - shmem_page_offset;
- page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
- if (IS_ERR(page)) {
- ret = PTR_ERR(page);
- goto out;
+ if (obj->pages) {
+ page = obj->pages[offset >> PAGE_SHIFT];
+ release_page = 0;
+ } else {
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+ if (IS_ERR(page)) {
+ ret = PTR_ERR(page);
+ goto out;
+ }
+ release_page = 1;
}
page_do_bit17_swizzling = obj_do_bit17_swizzling &&
(page_to_phys(page) & (1 << 17)) != 0;
- vaddr = kmap(page);
- if (page_do_bit17_swizzling)
- ret = __copy_to_user_swizzled(user_data,
- vaddr, shmem_page_offset,
- page_length);
- else
- ret = __copy_to_user(user_data,
- vaddr + shmem_page_offset,
- page_length);
- kunmap(page);
+ ret = shmem_pread_fast(page, shmem_page_offset, page_length,
+ user_data, page_do_bit17_swizzling,
+ needs_clflush);
+ if (ret == 0)
+ goto next_page;
- mark_page_accessed(page);
+ hit_slowpath = 1;
+ page_cache_get(page);
+ mutex_unlock(&dev->struct_mutex);
+
+ if (!prefaulted) {
+ ret = fault_in_multipages_writeable(user_data, remain);
+ /* Userspace is tricking us, but we've already clobbered
+ * its pages with the prefault and promised to write the
+ * data up to the first fault. Hence ignore any errors
+ * and just continue. */
+ (void)ret;
+ prefaulted = 1;
+ }
+
+ ret = shmem_pread_slow(page, shmem_page_offset, page_length,
+ user_data, page_do_bit17_swizzling,
+ needs_clflush);
+
+ mutex_lock(&dev->struct_mutex);
page_cache_release(page);
+next_page:
+ mark_page_accessed(page);
+ if (release_page)
+ page_cache_release(page);
if (ret) {
ret = -EFAULT;
@@ -447,10 +474,11 @@ i915_gem_shmem_pread_slow(struct drm_device *dev,
}
out:
- mutex_lock(&dev->struct_mutex);
- /* Fixup: Kill any reinstated backing storage pages */
- if (obj->madv == __I915_MADV_PURGED)
- i915_gem_object_truncate(obj);
+ if (hit_slowpath) {
+ /* Fixup: Kill any reinstated backing storage pages */
+ if (obj->madv == __I915_MADV_PURGED)
+ i915_gem_object_truncate(obj);
+ }
return ret;
}
@@ -476,11 +504,6 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
args->size))
return -EFAULT;
- ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
- args->size);
- if (ret)
- return -EFAULT;
-
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
@@ -500,17 +523,7 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
trace_i915_gem_object_pread(obj, args->offset, args->size);
- ret = i915_gem_object_set_cpu_read_domain_range(obj,
- args->offset,
- args->size);
- if (ret)
- goto out;
-
- ret = -EFAULT;
- if (!i915_gem_object_needs_bit17_swizzle(obj))
- ret = i915_gem_shmem_pread_fast(dev, obj, args, file);
- if (ret == -EFAULT)
- ret = i915_gem_shmem_pread_slow(dev, obj, args, file);
+ ret = i915_gem_shmem_pread(dev, obj, args, file);
out:
drm_gem_object_unreference(&obj->base);
@@ -539,30 +552,6 @@ fast_user_write(struct io_mapping *mapping,
return unwritten;
}
-/* Here's the write path which can sleep for
- * page faults
- */
-
-static inline void
-slow_kernel_write(struct io_mapping *mapping,
- loff_t gtt_base, int gtt_offset,
- struct page *user_page, int user_offset,
- int length)
-{
- char __iomem *dst_vaddr;
- char *src_vaddr;
-
- dst_vaddr = io_mapping_map_wc(mapping, gtt_base);
- src_vaddr = kmap(user_page);
-
- memcpy_toio(dst_vaddr + gtt_offset,
- src_vaddr + user_offset,
- length);
-
- kunmap(user_page);
- io_mapping_unmap(dst_vaddr);
-}
-
/**
* This is the fast pwrite path, where we copy the data directly from the
* user into the GTT, uncached.
@@ -577,7 +566,19 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev,
ssize_t remain;
loff_t offset, page_base;
char __user *user_data;
- int page_offset, page_length;
+ int page_offset, page_length, ret;
+
+ ret = i915_gem_object_pin(obj, 0, true);
+ if (ret)
+ goto out;
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, true);
+ if (ret)
+ goto out_unpin;
+
+ ret = i915_gem_object_put_fence(obj);
+ if (ret)
+ goto out_unpin;
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
@@ -602,214 +603,133 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev,
* retry in the slow path.
*/
if (fast_user_write(dev_priv->mm.gtt_mapping, page_base,
- page_offset, user_data, page_length))
- return -EFAULT;
+ page_offset, user_data, page_length)) {
+ ret = -EFAULT;
+ goto out_unpin;
+ }
remain -= page_length;
user_data += page_length;
offset += page_length;
}
- return 0;
+out_unpin:
+ i915_gem_object_unpin(obj);
+out:
+ return ret;
}
-/**
- * This is the fallback GTT pwrite path, which uses get_user_pages to pin
- * the memory and maps it using kmap_atomic for copying.
- *
- * This code resulted in x11perf -rgb10text consuming about 10% more CPU
- * than using i915_gem_gtt_pwrite_fast on a G45 (32-bit).
- */
+/* Per-page copy function for the shmem pwrite fastpath.
+ * Flushes invalid cachelines before writing to the target if
+ * needs_clflush_before is set and flushes out any written cachelines after
+ * writing if needs_clflush is set. */
static int
-i915_gem_gtt_pwrite_slow(struct drm_device *dev,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_pwrite *args,
- struct drm_file *file)
+shmem_pwrite_fast(struct page *page, int shmem_page_offset, int page_length,
+ char __user *user_data,
+ bool page_do_bit17_swizzling,
+ bool needs_clflush_before,
+ bool needs_clflush_after)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
- ssize_t remain;
- loff_t gtt_page_base, offset;
- loff_t first_data_page, last_data_page, num_pages;
- loff_t pinned_pages, i;
- struct page **user_pages;
- struct mm_struct *mm = current->mm;
- int gtt_page_offset, data_page_offset, data_page_index, page_length;
+ char *vaddr;
int ret;
- uint64_t data_ptr = args->data_ptr;
-
- remain = args->size;
-
- /* Pin the user pages containing the data. We can't fault while
- * holding the struct mutex, and all of the pwrite implementations
- * want to hold it while dereferencing the user data.
- */
- first_data_page = data_ptr / PAGE_SIZE;
- last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
- num_pages = last_data_page - first_data_page + 1;
-
- user_pages = drm_malloc_ab(num_pages, sizeof(struct page *));
- if (user_pages == NULL)
- return -ENOMEM;
-
- mutex_unlock(&dev->struct_mutex);
- down_read(&mm->mmap_sem);
- pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr,
- num_pages, 0, 0, user_pages, NULL);
- up_read(&mm->mmap_sem);
- mutex_lock(&dev->struct_mutex);
- if (pinned_pages < num_pages) {
- ret = -EFAULT;
- goto out_unpin_pages;
- }
-
- ret = i915_gem_object_set_to_gtt_domain(obj, true);
- if (ret)
- goto out_unpin_pages;
-
- ret = i915_gem_object_put_fence(obj);
- if (ret)
- goto out_unpin_pages;
-
- offset = obj->gtt_offset + args->offset;
- while (remain > 0) {
- /* Operation in this page
- *
- * gtt_page_base = page offset within aperture
- * gtt_page_offset = offset within page in aperture
- * data_page_index = page number in get_user_pages return
- * data_page_offset = offset with data_page_index page.
- * page_length = bytes to copy for this page
- */
- gtt_page_base = offset & PAGE_MASK;
- gtt_page_offset = offset_in_page(offset);
- data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = offset_in_page(data_ptr);
-
- page_length = remain;
- if ((gtt_page_offset + page_length) > PAGE_SIZE)
- page_length = PAGE_SIZE - gtt_page_offset;
- if ((data_page_offset + page_length) > PAGE_SIZE)
- page_length = PAGE_SIZE - data_page_offset;
-
- slow_kernel_write(dev_priv->mm.gtt_mapping,
- gtt_page_base, gtt_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length);
-
- remain -= page_length;
- offset += page_length;
- data_ptr += page_length;
- }
+ if (unlikely(page_do_bit17_swizzling))
+ return -EINVAL;
-out_unpin_pages:
- for (i = 0; i < pinned_pages; i++)
- page_cache_release(user_pages[i]);
- drm_free_large(user_pages);
+ vaddr = kmap_atomic(page);
+ if (needs_clflush_before)
+ drm_clflush_virt_range(vaddr + shmem_page_offset,
+ page_length);
+ ret = __copy_from_user_inatomic_nocache(vaddr + shmem_page_offset,
+ user_data,
+ page_length);
+ if (needs_clflush_after)
+ drm_clflush_virt_range(vaddr + shmem_page_offset,
+ page_length);
+ kunmap_atomic(vaddr);
return ret;
}
-/**
- * This is the fast shmem pwrite path, which attempts to directly
- * copy_from_user into the kmapped pages backing the object.
- */
+/* Only difference to the fast-path function is that this can handle bit17
+ * and uses non-atomic copy and kmap functions. */
static int
-i915_gem_shmem_pwrite_fast(struct drm_device *dev,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_pwrite *args,
- struct drm_file *file)
+shmem_pwrite_slow(struct page *page, int shmem_page_offset, int page_length,
+ char __user *user_data,
+ bool page_do_bit17_swizzling,
+ bool needs_clflush_before,
+ bool needs_clflush_after)
{
- struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
- ssize_t remain;
- loff_t offset;
- char __user *user_data;
- int page_offset, page_length;
-
- user_data = (char __user *) (uintptr_t) args->data_ptr;
- remain = args->size;
-
- offset = args->offset;
- obj->dirty = 1;
-
- while (remain > 0) {
- struct page *page;
- char *vaddr;
- int ret;
-
- /* Operation in this page
- *
- * page_offset = offset within page
- * page_length = bytes to copy for this page
- */
- page_offset = offset_in_page(offset);
- page_length = remain;
- if ((page_offset + remain) > PAGE_SIZE)
- page_length = PAGE_SIZE - page_offset;
-
- page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
- if (IS_ERR(page))
- return PTR_ERR(page);
+ char *vaddr;
+ int ret;
- vaddr = kmap_atomic(page);
- ret = __copy_from_user_inatomic(vaddr + page_offset,
+ vaddr = kmap(page);
+ if (unlikely(needs_clflush_before || page_do_bit17_swizzling))
+ shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
+ page_length,
+ page_do_bit17_swizzling);
+ if (page_do_bit17_swizzling)
+ ret = __copy_from_user_swizzled(vaddr, shmem_page_offset,
user_data,
page_length);
- kunmap_atomic(vaddr);
-
- set_page_dirty(page);
- mark_page_accessed(page);
- page_cache_release(page);
-
- /* If we get a fault while copying data, then (presumably) our
- * source page isn't available. Return the error and we'll
- * retry in the slow path.
- */
- if (ret)
- return -EFAULT;
-
- remain -= page_length;
- user_data += page_length;
- offset += page_length;
- }
+ else
+ ret = __copy_from_user(vaddr + shmem_page_offset,
+ user_data,
+ page_length);
+ if (needs_clflush_after)
+ shmem_clflush_swizzled_range(vaddr + shmem_page_offset,
+ page_length,
+ page_do_bit17_swizzling);
+ kunmap(page);
- return 0;
+ return ret;
}
-/**
- * This is the fallback shmem pwrite path, which uses get_user_pages to pin
- * the memory and maps it using kmap_atomic for copying.
- *
- * This avoids taking mmap_sem for faulting on the user's address while the
- * struct_mutex is held.
- */
static int
-i915_gem_shmem_pwrite_slow(struct drm_device *dev,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_pwrite *args,
- struct drm_file *file)
+i915_gem_shmem_pwrite(struct drm_device *dev,
+ struct drm_i915_gem_object *obj,
+ struct drm_i915_gem_pwrite *args,
+ struct drm_file *file)
{
struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
ssize_t remain;
loff_t offset;
char __user *user_data;
- int shmem_page_offset, page_length, ret;
+ int shmem_page_offset, page_length, ret = 0;
int obj_do_bit17_swizzling, page_do_bit17_swizzling;
+ int hit_slowpath = 0;
+ int needs_clflush_after = 0;
+ int needs_clflush_before = 0;
+ int release_page;
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+ if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
+ /* If we're not in the cpu write domain, set ourself into the gtt
+ * write domain and manually flush cachelines (if required). This
+ * optimizes for the case when the gpu will use the data
+ * right away and we therefore have to clflush anyway. */
+ if (obj->cache_level == I915_CACHE_NONE)
+ needs_clflush_after = 1;
+ ret = i915_gem_object_set_to_gtt_domain(obj, true);
+ if (ret)
+ return ret;
+ }
+ /* Same trick applies for invalidate partially written cachelines before
+ * writing. */
+ if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)
+ && obj->cache_level == I915_CACHE_NONE)
+ needs_clflush_before = 1;
+
offset = args->offset;
obj->dirty = 1;
- mutex_unlock(&dev->struct_mutex);
-
while (remain > 0) {
struct page *page;
- char *vaddr;
+ int partial_cacheline_write;
/* Operation in this page
*
@@ -822,29 +742,51 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev,
if ((shmem_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - shmem_page_offset;
- page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
- if (IS_ERR(page)) {
- ret = PTR_ERR(page);
- goto out;
+ /* If we don't overwrite a cacheline completely we need to be
+ * careful to have up-to-date data by first clflushing. Don't
+ * overcomplicate things and flush the entire patch. */
+ partial_cacheline_write = needs_clflush_before &&
+ ((shmem_page_offset | page_length)
+ & (boot_cpu_data.x86_clflush_size - 1));
+
+ if (obj->pages) {
+ page = obj->pages[offset >> PAGE_SHIFT];
+ release_page = 0;
+ } else {
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+ if (IS_ERR(page)) {
+ ret = PTR_ERR(page);
+ goto out;
+ }
+ release_page = 1;
}
page_do_bit17_swizzling = obj_do_bit17_swizzling &&
(page_to_phys(page) & (1 << 17)) != 0;
- vaddr = kmap(page);
- if (page_do_bit17_swizzling)
- ret = __copy_from_user_swizzled(vaddr, shmem_page_offset,
- user_data,
- page_length);
- else
- ret = __copy_from_user(vaddr + shmem_page_offset,
- user_data,
- page_length);
- kunmap(page);
+ ret = shmem_pwrite_fast(page, shmem_page_offset, page_length,
+ user_data, page_do_bit17_swizzling,
+ partial_cacheline_write,
+ needs_clflush_after);
+ if (ret == 0)
+ goto next_page;
+ hit_slowpath = 1;
+ page_cache_get(page);
+ mutex_unlock(&dev->struct_mutex);
+
+ ret = shmem_pwrite_slow(page, shmem_page_offset, page_length,
+ user_data, page_do_bit17_swizzling,
+ partial_cacheline_write,
+ needs_clflush_after);
+
+ mutex_lock(&dev->struct_mutex);
+ page_cache_release(page);
+next_page:
set_page_dirty(page);
mark_page_accessed(page);
- page_cache_release(page);
+ if (release_page)
+ page_cache_release(page);
if (ret) {
ret = -EFAULT;
@@ -857,17 +799,21 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev,
}
out:
- mutex_lock(&dev->struct_mutex);
- /* Fixup: Kill any reinstated backing storage pages */
- if (obj->madv == __I915_MADV_PURGED)
- i915_gem_object_truncate(obj);
- /* and flush dirty cachelines in case the object isn't in the cpu write
- * domain anymore. */
- if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- intel_gtt_chipset_flush();
+ if (hit_slowpath) {
+ /* Fixup: Kill any reinstated backing storage pages */
+ if (obj->madv == __I915_MADV_PURGED)
+ i915_gem_object_truncate(obj);
+ /* and flush dirty cachelines in case the object isn't in the cpu write
+ * domain anymore. */
+ if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
+ i915_gem_clflush_object(obj);
+ intel_gtt_chipset_flush();
+ }
}
+ if (needs_clflush_after)
+ intel_gtt_chipset_flush();
+
return ret;
}
@@ -892,8 +838,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
args->size))
return -EFAULT;
- ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
- args->size);
+ ret = fault_in_multipages_readable((char __user *)(uintptr_t)args->data_ptr,
+ args->size);
if (ret)
return -EFAULT;
@@ -916,6 +862,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
trace_i915_gem_object_pwrite(obj, args->offset, args->size);
+ ret = -EFAULT;
/* We can only do the GTT pwrite on untiled buffers, as otherwise
* it would end up going through the fenced access, and we'll get
* different detiling behavior between reading and writing.
@@ -928,42 +875,17 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
}
if (obj->gtt_space &&
+ obj->cache_level == I915_CACHE_NONE &&
+ obj->map_and_fenceable &&
obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
- ret = i915_gem_object_pin(obj, 0, true);
- if (ret)
- goto out;
-
- ret = i915_gem_object_set_to_gtt_domain(obj, true);
- if (ret)
- goto out_unpin;
-
- ret = i915_gem_object_put_fence(obj);
- if (ret)
- goto out_unpin;
-
ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file);
- if (ret == -EFAULT)
- ret = i915_gem_gtt_pwrite_slow(dev, obj, args, file);
-
-out_unpin:
- i915_gem_object_unpin(obj);
-
- if (ret != -EFAULT)
- goto out;
- /* Fall through to the shmfs paths because the gtt paths might
- * fail with non-page-backed user pointers (e.g. gtt mappings
- * when moving data between textures). */
+ /* Note that the gtt paths might fail with non-page-backed user
+ * pointers (e.g. gtt mappings when moving data between
+ * textures). Fallback to the shmem path in that case. */
}
- ret = i915_gem_object_set_to_cpu_domain(obj, 1);
- if (ret)
- goto out;
-
- ret = -EFAULT;
- if (!i915_gem_object_needs_bit17_swizzle(obj))
- ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file);
if (ret == -EFAULT)
- ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file);
+ ret = i915_gem_shmem_pwrite(dev, obj, args, file);
out:
drm_gem_object_unreference(&obj->base);
@@ -1153,6 +1075,9 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
goto unlock;
}
+ if (!obj->has_global_gtt_mapping)
+ i915_gem_gtt_bind_object(obj, obj->cache_level);
+
if (obj->tiling_mode == I915_TILING_NONE)
ret = i915_gem_object_put_fence(obj);
else
@@ -1546,6 +1471,9 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj)
inode = obj->base.filp->f_path.dentry->d_inode;
shmem_truncate_range(inode, 0, (loff_t)-1);
+ if (obj->base.map_list.map)
+ drm_gem_free_mmap_offset(&obj->base);
+
obj->madv = __I915_MADV_PURGED;
}
@@ -1954,6 +1882,8 @@ i915_wait_request(struct intel_ring_buffer *ring,
if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) {
if (HAS_PCH_SPLIT(ring->dev))
ier = I915_READ(DEIER) | I915_READ(GTIER);
+ else if (IS_VALLEYVIEW(ring->dev))
+ ier = I915_READ(GTIER) | I915_READ(VLV_IER);
else
ier = I915_READ(IER);
if (!ier) {
@@ -2100,11 +2030,13 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj)
trace_i915_gem_object_unbind(obj);
- i915_gem_gtt_unbind_object(obj);
+ if (obj->has_global_gtt_mapping)
+ i915_gem_gtt_unbind_object(obj);
if (obj->has_aliasing_ppgtt_mapping) {
i915_ppgtt_unbind_object(dev_priv->mm.aliasing_ppgtt, obj);
obj->has_aliasing_ppgtt_mapping = 0;
}
+ i915_gem_gtt_finish_object(obj);
i915_gem_object_put_pages_gtt(obj);
@@ -2749,7 +2681,7 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
return ret;
}
- ret = i915_gem_gtt_bind_object(obj);
+ ret = i915_gem_gtt_prepare_object(obj);
if (ret) {
i915_gem_object_put_pages_gtt(obj);
drm_mm_put_block(obj->gtt_space);
@@ -2761,6 +2693,9 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
goto search_free;
}
+ if (!dev_priv->mm.aliasing_ppgtt)
+ i915_gem_gtt_bind_object(obj, obj->cache_level);
+
list_add_tail(&obj->gtt_list, &dev_priv->mm.gtt_list);
list_add_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
@@ -2953,7 +2888,8 @@ int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
return ret;
}
- i915_gem_gtt_rebind_object(obj, cache_level);
+ if (obj->has_global_gtt_mapping)
+ i915_gem_gtt_bind_object(obj, cache_level);
if (obj->has_aliasing_ppgtt_mapping)
i915_ppgtt_bind_object(dev_priv->mm.aliasing_ppgtt,
obj, cache_level);
@@ -3082,7 +3018,7 @@ i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj)
* This function returns when the move is complete, including waiting on
* flushes to occur.
*/
-static int
+int
i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
{
uint32_t old_write_domain, old_read_domains;
@@ -3101,11 +3037,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
i915_gem_object_flush_gtt_write_domain(obj);
- /* If we have a partially-valid cache of the object in the CPU,
- * finish invalidating it and free the per-page flags.
- */
- i915_gem_object_set_to_full_cpu_read_domain(obj);
-
old_write_domain = obj->base.write_domain;
old_read_domains = obj->base.read_domains;
@@ -3136,113 +3067,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
return 0;
}
-/**
- * Moves the object from a partially CPU read to a full one.
- *
- * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
- * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
- */
-static void
-i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj)
-{
- if (!obj->page_cpu_valid)
- return;
-
- /* If we're partially in the CPU read domain, finish moving it in.
- */
- if (obj->base.read_domains & I915_GEM_DOMAIN_CPU) {
- int i;
-
- for (i = 0; i <= (obj->base.size - 1) / PAGE_SIZE; i++) {
- if (obj->page_cpu_valid[i])
- continue;
- drm_clflush_pages(obj->pages + i, 1);
- }
- }
-
- /* Free the page_cpu_valid mappings which are now stale, whether
- * or not we've got I915_GEM_DOMAIN_CPU.
- */
- kfree(obj->page_cpu_valid);
- obj->page_cpu_valid = NULL;
-}
-
-/**
- * Set the CPU read domain on a range of the object.
- *
- * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
- * not entirely valid. The page_cpu_valid member of the object flags which
- * pages have been flushed, and will be respected by
- * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
- * of the whole object.
- *
- * This function returns when the move is complete, including waiting on
- * flushes to occur.
- */
-static int
-i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
- uint64_t offset, uint64_t size)
-{
- uint32_t old_read_domains;
- int i, ret;
-
- if (offset == 0 && size == obj->base.size)
- return i915_gem_object_set_to_cpu_domain(obj, 0);
-
- ret = i915_gem_object_flush_gpu_write_domain(obj);
- if (ret)
- return ret;
-
- ret = i915_gem_object_wait_rendering(obj);
- if (ret)
- return ret;
-
- i915_gem_object_flush_gtt_write_domain(obj);
-
- /* If we're already fully in the CPU read domain, we're done. */
- if (obj->page_cpu_valid == NULL &&
- (obj->base.read_domains & I915_GEM_DOMAIN_CPU) != 0)
- return 0;
-
- /* Otherwise, create/clear the per-page CPU read domain flag if we're
- * newly adding I915_GEM_DOMAIN_CPU
- */
- if (obj->page_cpu_valid == NULL) {
- obj->page_cpu_valid = kzalloc(obj->base.size / PAGE_SIZE,
- GFP_KERNEL);
- if (obj->page_cpu_valid == NULL)
- return -ENOMEM;
- } else if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0)
- memset(obj->page_cpu_valid, 0, obj->base.size / PAGE_SIZE);
-
- /* Flush the cache on any pages that are still invalid from the CPU's
- * perspective.
- */
- for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
- i++) {
- if (obj->page_cpu_valid[i])
- continue;
-
- drm_clflush_pages(obj->pages + i, 1);
-
- obj->page_cpu_valid[i] = 1;
- }
-
- /* It should now be out of any other write domains, and we can update
- * the domain values for our changes.
- */
- BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
-
- old_read_domains = obj->base.read_domains;
- obj->base.read_domains |= I915_GEM_DOMAIN_CPU;
-
- trace_i915_gem_object_change_domain(obj,
- old_read_domains,
- obj->base.write_domain);
-
- return 0;
-}
-
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
@@ -3343,6 +3167,9 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj,
return ret;
}
+ if (!obj->has_global_gtt_mapping && map_and_fenceable)
+ i915_gem_gtt_bind_object(obj, obj->cache_level);
+
if (obj->pin_count++ == 0) {
if (!obj->active)
list_move_tail(&obj->mm_list,
@@ -3664,7 +3491,6 @@ static void i915_gem_free_object_tail(struct drm_i915_gem_object *obj)
drm_gem_object_release(&obj->base);
i915_gem_info_remove_obj(dev_priv, obj->base.size);
- kfree(obj->page_cpu_valid);
kfree(obj->bit_17);
kfree(obj);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index f51a696486cb..254e2f6ac4f0 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -266,6 +266,12 @@ eb_destroy(struct eb_objects *eb)
kfree(eb);
}
+static inline int use_cpu_reloc(struct drm_i915_gem_object *obj)
+{
+ return (obj->base.write_domain == I915_GEM_DOMAIN_CPU ||
+ obj->cache_level != I915_CACHE_NONE);
+}
+
static int
i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
struct eb_objects *eb,
@@ -273,6 +279,7 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
{
struct drm_device *dev = obj->base.dev;
struct drm_gem_object *target_obj;
+ struct drm_i915_gem_object *target_i915_obj;
uint32_t target_offset;
int ret = -EINVAL;
@@ -281,7 +288,8 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
if (unlikely(target_obj == NULL))
return -ENOENT;
- target_offset = to_intel_bo(target_obj)->gtt_offset;
+ target_i915_obj = to_intel_bo(target_obj);
+ target_offset = target_i915_obj->gtt_offset;
/* The target buffer should have appeared before us in the
* exec_object list, so it should have a GTT space bound by now.
@@ -352,11 +360,19 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
return ret;
}
+ /* We can't wait for rendering with pagefaults disabled */
+ if (obj->active && in_atomic())
+ return -EFAULT;
+
reloc->delta += target_offset;
- if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
+ if (use_cpu_reloc(obj)) {
uint32_t page_offset = reloc->offset & ~PAGE_MASK;
char *vaddr;
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
+ if (ret)
+ return ret;
+
vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
*(uint32_t *)(vaddr + page_offset) = reloc->delta;
kunmap_atomic(vaddr);
@@ -365,10 +381,6 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
uint32_t __iomem *reloc_entry;
void __iomem *reloc_page;
- /* We can't wait for rendering with pagefaults disabled */
- if (obj->active && in_atomic())
- return -EFAULT;
-
ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret)
return ret;
@@ -383,6 +395,16 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
io_mapping_unmap_atomic(reloc_page);
}
+ /* Sandybridge PPGTT errata: We need a global gtt mapping for MI and
+ * pipe_control writes because the gpu doesn't properly redirect them
+ * through the ppgtt for non_secure batchbuffers. */
+ if (unlikely(IS_GEN6(dev) &&
+ reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION &&
+ !target_i915_obj->has_global_gtt_mapping)) {
+ i915_gem_gtt_bind_object(target_i915_obj,
+ target_i915_obj->cache_level);
+ }
+
/* and update the user's relocation entry */
reloc->presumed_offset = target_offset;
@@ -393,30 +415,46 @@ static int
i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
struct eb_objects *eb)
{
+#define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry))
+ struct drm_i915_gem_relocation_entry stack_reloc[N_RELOC(512)];
struct drm_i915_gem_relocation_entry __user *user_relocs;
struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
- int i, ret;
+ int remain, ret;
user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
- for (i = 0; i < entry->relocation_count; i++) {
- struct drm_i915_gem_relocation_entry reloc;
- if (__copy_from_user_inatomic(&reloc,
- user_relocs+i,
- sizeof(reloc)))
+ remain = entry->relocation_count;
+ while (remain) {
+ struct drm_i915_gem_relocation_entry *r = stack_reloc;
+ int count = remain;
+ if (count > ARRAY_SIZE(stack_reloc))
+ count = ARRAY_SIZE(stack_reloc);
+ remain -= count;
+
+ if (__copy_from_user_inatomic(r, user_relocs, count*sizeof(r[0])))
return -EFAULT;
- ret = i915_gem_execbuffer_relocate_entry(obj, eb, &reloc);
- if (ret)
- return ret;
+ do {
+ u64 offset = r->presumed_offset;
- if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
- &reloc.presumed_offset,
- sizeof(reloc.presumed_offset)))
- return -EFAULT;
+ ret = i915_gem_execbuffer_relocate_entry(obj, eb, r);
+ if (ret)
+ return ret;
+
+ if (r->presumed_offset != offset &&
+ __copy_to_user_inatomic(&user_relocs->presumed_offset,
+ &r->presumed_offset,
+ sizeof(r->presumed_offset))) {
+ return -EFAULT;
+ }
+
+ user_relocs++;
+ r++;
+ } while (--count);
}
return 0;
+#undef N_RELOC
}
static int
@@ -465,6 +503,13 @@ i915_gem_execbuffer_relocate(struct drm_device *dev,
#define __EXEC_OBJECT_HAS_FENCE (1<<31)
static int
+need_reloc_mappable(struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
+ return entry->relocation_count && !use_cpu_reloc(obj);
+}
+
+static int
pin_and_fence_object(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *ring)
{
@@ -477,8 +522,7 @@ pin_and_fence_object(struct drm_i915_gem_object *obj,
has_fenced_gpu_access &&
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
- need_mappable =
- entry->relocation_count ? true : need_fence;
+ need_mappable = need_fence || need_reloc_mappable(obj);
ret = i915_gem_object_pin(obj, entry->alignment, need_mappable);
if (ret)
@@ -535,8 +579,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
has_fenced_gpu_access &&
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
- need_mappable =
- entry->relocation_count ? true : need_fence;
+ need_mappable = need_fence || need_reloc_mappable(obj);
if (need_mappable)
list_move(&obj->exec_list, &ordered_objects);
@@ -576,8 +619,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
has_fenced_gpu_access &&
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
- need_mappable =
- entry->relocation_count ? true : need_fence;
+ need_mappable = need_fence || need_reloc_mappable(obj);
if ((entry->alignment && obj->gtt_offset & (entry->alignment - 1)) ||
(need_mappable && !obj->map_and_fenceable))
@@ -955,7 +997,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
if (!access_ok(VERIFY_WRITE, ptr, length))
return -EFAULT;
- if (fault_in_pages_readable(ptr, length))
+ if (fault_in_multipages_readable(ptr, length))
return -EFAULT;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index a135c61f4119..4fb875de32e6 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -346,42 +346,28 @@ void i915_gem_restore_gtt_mappings(struct drm_device *dev)
list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
i915_gem_clflush_object(obj);
- i915_gem_gtt_rebind_object(obj, obj->cache_level);
+ i915_gem_gtt_bind_object(obj, obj->cache_level);
}
intel_gtt_chipset_flush();
}
-int i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj)
+int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned int agp_type = cache_level_to_agp_type(dev, obj->cache_level);
- int ret;
- if (dev_priv->mm.gtt->needs_dmar) {
- ret = intel_gtt_map_memory(obj->pages,
- obj->base.size >> PAGE_SHIFT,
- &obj->sg_list,
- &obj->num_sg);
- if (ret != 0)
- return ret;
-
- intel_gtt_insert_sg_entries(obj->sg_list,
- obj->num_sg,
- obj->gtt_space->start >> PAGE_SHIFT,
- agp_type);
- } else
- intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT,
- obj->base.size >> PAGE_SHIFT,
- obj->pages,
- agp_type);
-
- return 0;
+ if (dev_priv->mm.gtt->needs_dmar)
+ return intel_gtt_map_memory(obj->pages,
+ obj->base.size >> PAGE_SHIFT,
+ &obj->sg_list,
+ &obj->num_sg);
+ else
+ return 0;
}
-void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
- enum i915_cache_level cache_level)
+void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,
+ enum i915_cache_level cache_level)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -399,19 +385,26 @@ void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
obj->base.size >> PAGE_SHIFT,
obj->pages,
agp_type);
+
+ obj->has_global_gtt_mapping = 1;
}
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
{
+ intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
+ obj->base.size >> PAGE_SHIFT);
+
+ obj->has_global_gtt_mapping = 0;
+}
+
+void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj)
+{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
bool interruptible;
interruptible = do_idling(dev_priv);
- intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
- obj->base.size >> PAGE_SHIFT);
-
if (obj->sg_list) {
intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
obj->sg_list = NULL;
@@ -419,3 +412,23 @@ void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
undo_idling(dev_priv, interruptible);
}
+
+void i915_gem_init_global_gtt(struct drm_device *dev,
+ unsigned long start,
+ unsigned long mappable_end,
+ unsigned long end)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ /* Substract the guard page ... */
+ drm_mm_init(&dev_priv->mm.gtt_space, start, end - start - PAGE_SIZE);
+
+ dev_priv->mm.gtt_start = start;
+ dev_priv->mm.gtt_mappable_end = mappable_end;
+ dev_priv->mm.gtt_end = end;
+ dev_priv->mm.gtt_total = end - start;
+ dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
+
+ /* ... but ensure that we clear the entire range. */
+ intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE);
+}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index afd4e03e337e..febddc2952fb 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -26,6 +26,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sysrq.h>
#include <linux/slab.h>
#include "drmP.h"
@@ -118,6 +120,10 @@ void intel_enable_asle(struct drm_device *dev)
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long irqflags;
+ /* FIXME: opregion/asle for VLV */
+ if (IS_VALLEYVIEW(dev))
+ return;
+
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (HAS_PCH_SPLIT(dev))
@@ -424,6 +430,128 @@ static void gen6_pm_rps_work(struct work_struct *work)
mutex_unlock(&dev_priv->dev->struct_mutex);
}
+static void snb_gt_irq_handler(struct drm_device *dev,
+ struct drm_i915_private *dev_priv,
+ u32 gt_iir)
+{
+
+ if (gt_iir & (GEN6_RENDER_USER_INTERRUPT |
+ GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT))
+ notify_ring(dev, &dev_priv->ring[RCS]);
+ if (gt_iir & GEN6_BSD_USER_INTERRUPT)
+ notify_ring(dev, &dev_priv->ring[VCS]);
+ if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
+ notify_ring(dev, &dev_priv->ring[BCS]);
+
+ if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
+ GT_GEN6_BSD_CS_ERROR_INTERRUPT |
+ GT_RENDER_CS_ERROR_INTERRUPT)) {
+ DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
+ i915_handle_error(dev, false);
+ }
+}
+
+static irqreturn_t valleyview_irq_handler(DRM_IRQ_ARGS)
+{
+ struct drm_device *dev = (struct drm_device *) arg;
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 iir, gt_iir, pm_iir;
+ irqreturn_t ret = IRQ_NONE;
+ unsigned long irqflags;
+ int pipe;
+ u32 pipe_stats[I915_MAX_PIPES];
+ u32 vblank_status;
+ int vblank = 0;
+ bool blc_event;
+
+ atomic_inc(&dev_priv->irq_received);
+
+ vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS |
+ PIPE_VBLANK_INTERRUPT_STATUS;
+
+ while (true) {
+ iir = I915_READ(VLV_IIR);
+ gt_iir = I915_READ(GTIIR);
+ pm_iir = I915_READ(GEN6_PMIIR);
+
+ if (gt_iir == 0 && pm_iir == 0 && iir == 0)
+ goto out;
+
+ ret = IRQ_HANDLED;
+
+ snb_gt_irq_handler(dev, dev_priv, gt_iir);
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ for_each_pipe(pipe) {
+ int reg = PIPESTAT(pipe);
+ pipe_stats[pipe] = I915_READ(reg);
+
+ /*
+ * Clear the PIPE*STAT regs before the IIR
+ */
+ if (pipe_stats[pipe] & 0x8000ffff) {
+ if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
+ DRM_DEBUG_DRIVER("pipe %c underrun\n",
+ pipe_name(pipe));
+ I915_WRITE(reg, pipe_stats[pipe]);
+ }
+ }
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+ /* Consume port. Then clear IIR or we'll miss events */
+ if (iir & I915_DISPLAY_PORT_INTERRUPT) {
+ u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+
+ DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
+ hotplug_status);
+ if (hotplug_status & dev_priv->hotplug_supported_mask)
+ queue_work(dev_priv->wq,
+ &dev_priv->hotplug_work);
+
+ I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+ I915_READ(PORT_HOTPLUG_STAT);
+ }
+
+
+ if (iir & I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT) {
+ drm_handle_vblank(dev, 0);
+ vblank++;
+ if (!dev_priv->flip_pending_is_done) {
+ intel_finish_page_flip(dev, 0);
+ }
+ }
+
+ if (iir & I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT) {
+ drm_handle_vblank(dev, 1);
+ vblank++;
+ if (!dev_priv->flip_pending_is_done) {
+ intel_finish_page_flip(dev, 0);
+ }
+ }
+
+ if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
+ blc_event = true;
+
+ if (pm_iir & GEN6_PM_DEFERRED_EVENTS) {
+ unsigned long flags;
+ spin_lock_irqsave(&dev_priv->rps_lock, flags);
+ WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
+ dev_priv->pm_iir |= pm_iir;
+ I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
+ POSTING_READ(GEN6_PMIMR);
+ spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
+ queue_work(dev_priv->wq, &dev_priv->rps_work);
+ }
+
+ I915_WRITE(GTIIR, gt_iir);
+ I915_WRITE(GEN6_PMIIR, pm_iir);
+ I915_WRITE(VLV_IIR, iir);
+ }
+
+out:
+ return ret;
+}
+
static void pch_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -499,12 +627,7 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
READ_BREADCRUMB(dev_priv);
}
- if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
- notify_ring(dev, &dev_priv->ring[RCS]);
- if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT)
- notify_ring(dev, &dev_priv->ring[VCS]);
- if (gt_iir & GT_BLT_USER_INTERRUPT)
- notify_ring(dev, &dev_priv->ring[BCS]);
+ snb_gt_irq_handler(dev, dev_priv, gt_iir);
if (de_iir & DE_GSE_IVB)
intel_opregion_gse_intr(dev);
@@ -556,6 +679,16 @@ done:
return ret;
}
+static void ilk_gt_irq_handler(struct drm_device *dev,
+ struct drm_i915_private *dev_priv,
+ u32 gt_iir)
+{
+ if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
+ notify_ring(dev, &dev_priv->ring[RCS]);
+ if (gt_iir & GT_BSD_USER_INTERRUPT)
+ notify_ring(dev, &dev_priv->ring[VCS]);
+}
+
static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -564,13 +697,9 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir;
u32 hotplug_mask;
struct drm_i915_master_private *master_priv;
- u32 bsd_usr_interrupt = GT_BSD_USER_INTERRUPT;
atomic_inc(&dev_priv->irq_received);
- if (IS_GEN6(dev))
- bsd_usr_interrupt = GT_GEN6_BSD_USER_INTERRUPT;
-
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
@@ -599,12 +728,10 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
READ_BREADCRUMB(dev_priv);
}
- if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
- notify_ring(dev, &dev_priv->ring[RCS]);
- if (gt_iir & bsd_usr_interrupt)
- notify_ring(dev, &dev_priv->ring[VCS]);
- if (gt_iir & GT_BLT_USER_INTERRUPT)
- notify_ring(dev, &dev_priv->ring[BCS]);
+ if (IS_GEN5(dev))
+ ilk_gt_irq_handler(dev, dev_priv, gt_iir);
+ else
+ snb_gt_irq_handler(dev, dev_priv, gt_iir);
if (de_iir & DE_GSE)
intel_opregion_gse_intr(dev);
@@ -727,7 +854,8 @@ i915_error_object_create(struct drm_i915_private *dev_priv,
goto unwind;
local_irq_save(flags);
- if (reloc_offset < dev_priv->mm.gtt_mappable_end) {
+ if (reloc_offset < dev_priv->mm.gtt_mappable_end &&
+ src->has_global_gtt_mapping) {
void __iomem *s;
/* Simply ignore tiling or any overlapping fence.
@@ -901,7 +1029,6 @@ static void i915_record_ring_state(struct drm_device *dev,
struct drm_i915_private *dev_priv = dev->dev_private;
if (INTEL_INFO(dev)->gen >= 6) {
- error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base));
error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring));
error->semaphore_mboxes[ring->id][0]
= I915_READ(RING_SYNC_0(ring->mmio_base));
@@ -910,6 +1037,7 @@ static void i915_record_ring_state(struct drm_device *dev,
}
if (INTEL_INFO(dev)->gen >= 4) {
+ error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base));
error->ipeir[ring->id] = I915_READ(RING_IPEIR(ring->mmio_base));
error->ipehr[ring->id] = I915_READ(RING_IPEHR(ring->mmio_base));
error->instdone[ring->id] = I915_READ(RING_INSTDONE(ring->mmio_base));
@@ -919,6 +1047,7 @@ static void i915_record_ring_state(struct drm_device *dev,
error->bbaddr = I915_READ64(BB_ADDR);
}
} else {
+ error->faddr[ring->id] = I915_READ(DMA_FADD_I8XX);
error->ipeir[ring->id] = I915_READ(IPEIR);
error->ipehr[ring->id] = I915_READ(IPEHR);
error->instdone[ring->id] = I915_READ(INSTDONE);
@@ -1103,33 +1232,26 @@ static void i915_report_and_clear_eir(struct drm_device *dev)
if (!eir)
return;
- printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
- eir);
+ pr_err("render error detected, EIR: 0x%08x\n", eir);
if (IS_G4X(dev)) {
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
u32 ipeir = I915_READ(IPEIR_I965);
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR_I965));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR_I965));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
+ pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
+ pr_err(" INSTDONE: 0x%08x\n",
I915_READ(INSTDONE_I965));
- printk(KERN_ERR " INSTPS: 0x%08x\n",
- I915_READ(INSTPS));
- printk(KERN_ERR " INSTDONE1: 0x%08x\n",
- I915_READ(INSTDONE1));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD_I965));
+ pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
+ pr_err(" INSTDONE1: 0x%08x\n", I915_READ(INSTDONE1));
+ pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
if (eir & GM45_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
- printk(KERN_ERR "page table error\n");
- printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
- pgtbl_err);
+ pr_err("page table error\n");
+ pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
@@ -1138,53 +1260,42 @@ static void i915_report_and_clear_eir(struct drm_device *dev)
if (!IS_GEN2(dev)) {
if (eir & I915_ERROR_PAGE_TABLE) {
u32 pgtbl_err = I915_READ(PGTBL_ER);
- printk(KERN_ERR "page table error\n");
- printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
- pgtbl_err);
+ pr_err("page table error\n");
+ pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
I915_WRITE(PGTBL_ER, pgtbl_err);
POSTING_READ(PGTBL_ER);
}
}
if (eir & I915_ERROR_MEMORY_REFRESH) {
- printk(KERN_ERR "memory refresh error:\n");
+ pr_err("memory refresh error:\n");
for_each_pipe(pipe)
- printk(KERN_ERR "pipe %c stat: 0x%08x\n",
+ pr_err("pipe %c stat: 0x%08x\n",
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
/* pipestat has already been acked */
}
if (eir & I915_ERROR_INSTRUCTION) {
- printk(KERN_ERR "instruction error\n");
- printk(KERN_ERR " INSTPM: 0x%08x\n",
- I915_READ(INSTPM));
+ pr_err("instruction error\n");
+ pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM));
if (INTEL_INFO(dev)->gen < 4) {
u32 ipeir = I915_READ(IPEIR);
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
- I915_READ(INSTDONE));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD));
+ pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR));
+ pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR));
+ pr_err(" INSTDONE: 0x%08x\n", I915_READ(INSTDONE));
+ pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD));
I915_WRITE(IPEIR, ipeir);
POSTING_READ(IPEIR);
} else {
u32 ipeir = I915_READ(IPEIR_I965);
- printk(KERN_ERR " IPEIR: 0x%08x\n",
- I915_READ(IPEIR_I965));
- printk(KERN_ERR " IPEHR: 0x%08x\n",
- I915_READ(IPEHR_I965));
- printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
+ pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
+ pr_err(" INSTDONE: 0x%08x\n",
I915_READ(INSTDONE_I965));
- printk(KERN_ERR " INSTPS: 0x%08x\n",
- I915_READ(INSTPS));
- printk(KERN_ERR " INSTDONE1: 0x%08x\n",
- I915_READ(INSTDONE1));
- printk(KERN_ERR " ACTHD: 0x%08x\n",
- I915_READ(ACTHD_I965));
+ pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
+ pr_err(" INSTDONE1: 0x%08x\n", I915_READ(INSTDONE1));
+ pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
I915_WRITE(IPEIR_I965, ipeir);
POSTING_READ(IPEIR_I965);
}
@@ -1582,6 +1693,32 @@ static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
return 0;
}
+static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
+ u32 dpfl, imr;
+
+ if (!i915_pipe_enabled(dev, pipe))
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ dpfl = I915_READ(VLV_DPFLIPSTAT);
+ imr = I915_READ(VLV_IMR);
+ if (pipe == 0) {
+ dpfl |= PIPEA_VBLANK_INT_EN;
+ imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
+ } else {
+ dpfl |= PIPEA_VBLANK_INT_EN;
+ imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
+ }
+ I915_WRITE(VLV_DPFLIPSTAT, dpfl);
+ I915_WRITE(VLV_IMR, imr);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+ return 0;
+}
+
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
@@ -1623,6 +1760,28 @@ static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
+static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
+ u32 dpfl, imr;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ dpfl = I915_READ(VLV_DPFLIPSTAT);
+ imr = I915_READ(VLV_IMR);
+ if (pipe == 0) {
+ dpfl &= ~PIPEA_VBLANK_INT_EN;
+ imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
+ } else {
+ dpfl &= ~PIPEB_VBLANK_INT_EN;
+ imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
+ }
+ I915_WRITE(VLV_IMR, imr);
+ I915_WRITE(VLV_DPFLIPSTAT, dpfl);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+}
+
+
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
@@ -1832,6 +1991,41 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
POSTING_READ(SDEIER);
}
+static void valleyview_irq_preinstall(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ int pipe;
+
+ atomic_set(&dev_priv->irq_received, 0);
+
+ INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+ INIT_WORK(&dev_priv->error_work, i915_error_work_func);
+
+ /* VLV magic */
+ I915_WRITE(VLV_IMR, 0);
+ I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
+ I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
+ I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
+
+ /* and GT */
+ I915_WRITE(GTIIR, I915_READ(GTIIR));
+ I915_WRITE(GTIIR, I915_READ(GTIIR));
+ I915_WRITE(GTIMR, 0xffffffff);
+ I915_WRITE(GTIER, 0x0);
+ POSTING_READ(GTIER);
+
+ I915_WRITE(DPINVGTT, 0xff);
+
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+ for_each_pipe(pipe)
+ I915_WRITE(PIPESTAT(pipe), 0xffff);
+ I915_WRITE(VLV_IIR, 0xffffffff);
+ I915_WRITE(VLV_IMR, 0xffffffff);
+ I915_WRITE(VLV_IER, 0x0);
+ POSTING_READ(VLV_IER);
+}
+
/*
* Enable digital hotplug on the PCH, and configure the DP short pulse
* duration to 2ms (which is the minimum in the Display Port spec)
@@ -1884,8 +2078,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
if (IS_GEN6(dev))
render_irqs =
GT_USER_INTERRUPT |
- GT_GEN6_BSD_USER_INTERRUPT |
- GT_BLT_USER_INTERRUPT;
+ GEN6_BSD_USER_INTERRUPT |
+ GEN6_BLITTER_USER_INTERRUPT;
else
render_irqs =
GT_USER_INTERRUPT |
@@ -1957,8 +2151,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- render_irqs = GT_USER_INTERRUPT | GT_GEN6_BSD_USER_INTERRUPT |
- GT_BLT_USER_INTERRUPT;
+ render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
+ GEN6_BLITTER_USER_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
@@ -1978,6 +2172,96 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
return 0;
}
+static int valleyview_irq_postinstall(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 render_irqs;
+ u32 enable_mask;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+ u16 msid;
+
+ enable_mask = I915_DISPLAY_PORT_INTERRUPT;
+ enable_mask |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
+ I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
+
+ dev_priv->irq_mask = ~enable_mask;
+
+
+ DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue);
+ DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue);
+ DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue);
+
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
+
+ /* Hack for broken MSIs on VLV */
+ pci_write_config_dword(dev_priv->dev->pdev, 0x94, 0xfee00000);
+ pci_read_config_word(dev->pdev, 0x98, &msid);
+ msid &= 0xff; /* mask out delivery bits */
+ msid |= (1<<14);
+ pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
+
+ I915_WRITE(VLV_IMR, dev_priv->irq_mask);
+ I915_WRITE(VLV_IER, enable_mask);
+ I915_WRITE(VLV_IIR, 0xffffffff);
+ I915_WRITE(PIPESTAT(0), 0xffff);
+ I915_WRITE(PIPESTAT(1), 0xffff);
+ POSTING_READ(VLV_IER);
+
+ I915_WRITE(VLV_IIR, 0xffffffff);
+ I915_WRITE(VLV_IIR, 0xffffffff);
+
+ render_irqs = GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT |
+ GT_GEN6_BLT_CS_ERROR_INTERRUPT |
+ GT_GEN6_BLT_USER_INTERRUPT |
+ GT_GEN6_BSD_USER_INTERRUPT |
+ GT_GEN6_BSD_CS_ERROR_INTERRUPT |
+ GT_GEN7_L3_PARITY_ERROR_INTERRUPT |
+ GT_PIPE_NOTIFY |
+ GT_RENDER_CS_ERROR_INTERRUPT |
+ GT_SYNC_STATUS |
+ GT_USER_INTERRUPT;
+
+ dev_priv->gt_irq_mask = ~render_irqs;
+
+ I915_WRITE(GTIIR, I915_READ(GTIIR));
+ I915_WRITE(GTIIR, I915_READ(GTIIR));
+ I915_WRITE(GTIMR, 0);
+ I915_WRITE(GTIER, render_irqs);
+ POSTING_READ(GTIER);
+
+ /* ack & enable invalid PTE error interrupts */
+#if 0 /* FIXME: add support to irq handler for checking these bits */
+ I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
+ I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
+#endif
+
+ I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
+#if 0 /* FIXME: check register definitions; some have moved */
+ /* Note HDMI and DP share bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+ }
+#endif
+
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+
+ return 0;
+}
+
static void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -2081,6 +2365,30 @@ static int i915_driver_irq_postinstall(struct drm_device *dev)
return 0;
}
+static void valleyview_irq_uninstall(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ int pipe;
+
+ if (!dev_priv)
+ return;
+
+ dev_priv->vblank_pipe = 0;
+
+ for_each_pipe(pipe)
+ I915_WRITE(PIPESTAT(pipe), 0xffff);
+
+ I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+ for_each_pipe(pipe)
+ I915_WRITE(PIPESTAT(pipe), 0xffff);
+ I915_WRITE(VLV_IIR, 0xffffffff);
+ I915_WRITE(VLV_IMR, 0xffffffff);
+ I915_WRITE(VLV_IER, 0x0);
+ POSTING_READ(VLV_IER);
+}
+
static void ironlake_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -2136,7 +2444,8 @@ void intel_irq_init(struct drm_device *dev)
{
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+ if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev) ||
+ IS_VALLEYVIEW(dev)) {
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
}
@@ -2147,7 +2456,14 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->get_vblank_timestamp = NULL;
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
- if (IS_IVYBRIDGE(dev)) {
+ if (IS_VALLEYVIEW(dev)) {
+ dev->driver->irq_handler = valleyview_irq_handler;
+ dev->driver->irq_preinstall = valleyview_irq_preinstall;
+ dev->driver->irq_postinstall = valleyview_irq_postinstall;
+ dev->driver->irq_uninstall = valleyview_irq_uninstall;
+ dev->driver->enable_vblank = valleyview_enable_vblank;
+ dev->driver->disable_vblank = valleyview_disable_vblank;
+ } else if (IS_IVYBRIDGE(dev)) {
/* Share pre & uninstall handlers with ILK/SNB */
dev->driver->irq_handler = ivybridge_irq_handler;
dev->driver->irq_preinstall = ironlake_irq_preinstall;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2abf4eb94039..6924f44a88df 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -27,6 +27,8 @@
#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
+#define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
+
/*
* The Bridge device's PCI config space has information about the
* fb aperture size and the amount of pre-reserved memory.
@@ -301,6 +303,61 @@
#define DEBUG_RESET_RENDER (1<<8)
#define DEBUG_RESET_DISPLAY (1<<9)
+/*
+ * DPIO - a special bus for various display related registers to hide behind:
+ * 0x800c: m1, m2, n, p1, p2, k dividers
+ * 0x8014: REF and SFR select
+ * 0x8014: N divider, VCO select
+ * 0x801c/3c: core clock bits
+ * 0x8048/68: low pass filter coefficients
+ * 0x8100: fast clock controls
+ */
+#define DPIO_PKT 0x2100
+#define DPIO_RID (0<<24)
+#define DPIO_OP_WRITE (1<<16)
+#define DPIO_OP_READ (0<<16)
+#define DPIO_PORTID (0x12<<8)
+#define DPIO_BYTE (0xf<<4)
+#define DPIO_BUSY (1<<0) /* status only */
+#define DPIO_DATA 0x2104
+#define DPIO_REG 0x2108
+#define DPIO_CTL 0x2110
+#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */
+#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */
+#define DPIO_SFR_BYPASS (1<<1)
+#define DPIO_RESET (1<<0)
+
+#define _DPIO_DIV_A 0x800c
+#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */
+#define DPIO_K_SHIFT (24) /* 4 bits */
+#define DPIO_P1_SHIFT (21) /* 3 bits */
+#define DPIO_P2_SHIFT (16) /* 5 bits */
+#define DPIO_N_SHIFT (12) /* 4 bits */
+#define DPIO_ENABLE_CALIBRATION (1<<11)
+#define DPIO_M1DIV_SHIFT (8) /* 3 bits */
+#define DPIO_M2DIV_MASK 0xff
+#define _DPIO_DIV_B 0x802c
+#define DPIO_DIV(pipe) _PIPE(pipe, _DPIO_DIV_A, _DPIO_DIV_B)
+
+#define _DPIO_REFSFR_A 0x8014
+#define DPIO_REFSEL_OVERRIDE 27
+#define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */
+#define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */
+#define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */
+#define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */
+#define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */
+#define _DPIO_REFSFR_B 0x8034
+#define DPIO_REFSFR(pipe) _PIPE(pipe, _DPIO_REFSFR_A, _DPIO_REFSFR_B)
+
+#define _DPIO_CORE_CLK_A 0x801c
+#define _DPIO_CORE_CLK_B 0x803c
+#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B)
+
+#define _DPIO_LFP_COEFF_A 0x8048
+#define _DPIO_LFP_COEFF_B 0x8068
+#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B)
+
+#define DPIO_FASTCLK_DISABLE 0x8100
/*
* Fence registers
@@ -417,6 +474,7 @@
#define INSTDONE 0x02090
#define NOPID 0x02094
#define HWSTAM 0x02098
+#define DMA_FADD_I8XX 0x020d0
#define ERROR_GEN6 0x040a0
@@ -455,6 +513,11 @@
#define IIR 0x020a4
#define IMR 0x020a8
#define ISR 0x020ac
+#define VLV_IIR_RW 0x182084
+#define VLV_IER 0x1820a0
+#define VLV_IIR 0x1820a4
+#define VLV_IMR 0x1820a8
+#define VLV_ISR 0x1820ac
#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
@@ -578,7 +641,12 @@
#define ECO_GATING_CX_ONLY (1<<3)
#define ECO_FLIP_DONE (1<<0)
-/* GEN6 interrupt control */
+#define CACHE_MODE_1 0x7004 /* IVB+ */
+#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
+
+/* GEN6 interrupt control
+ * Note that the per-ring interrupt bits do alias with the global interrupt bits
+ * in GTIMR. */
#define GEN6_RENDER_HWSTAM 0x2098
#define GEN6_RENDER_IMR 0x20a8
#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
@@ -742,9 +810,9 @@
#define GMBUS_PORT_PANEL 3
#define GMBUS_PORT_DPC 4 /* HDMIC */
#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */
- /* 6 reserved */
-#define GMBUS_PORT_DPD 7 /* HDMID */
-#define GMBUS_NUM_PORTS 8
+#define GMBUS_PORT_DPD 6 /* HDMID */
+#define GMBUS_PORT_RESERVED 7 /* 7 reserved */
+#define GMBUS_NUM_PORTS (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1)
#define GMBUS1 0x5104 /* command/status */
#define GMBUS_SW_CLR_INT (1<<31)
#define GMBUS_SW_RDY (1<<30)
@@ -796,7 +864,9 @@
#define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
#define DPLL_VCO_ENABLE (1 << 31)
#define DPLL_DVO_HIGH_SPEED (1 << 30)
+#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30)
#define DPLL_SYNCLOCK_ENABLE (1 << 29)
+#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29)
#define DPLL_VGA_MODE_DIS (1 << 28)
#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
#define DPLLB_MODE_LVDS (2 << 26) /* i915 */
@@ -808,6 +878,7 @@
#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
+#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
@@ -903,6 +974,7 @@
#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
#define _DPLL_B_MD 0x06020 /* 965+ only */
#define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD)
+
#define _FPA0 0x06040
#define _FPA1 0x06044
#define _FPB0 0x06048
@@ -1043,6 +1115,9 @@
#define RAMCLK_GATE_D 0x6210 /* CRL only */
#define DEUC 0x6214 /* CRL only */
+#define FW_BLC_SELF_VLV 0x6500
+#define FW_CSPWRDWNEN (1<<15)
+
/*
* Palette regs
*/
@@ -2421,23 +2496,30 @@
#define PIPECONF_DITHER_TYPE_TEMP (3<<2)
#define _PIPEASTAT 0x70024
#define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31)
+#define SPRITE1_FLIPDONE_INT_EN_VLV (1UL<<30)
#define PIPE_CRC_ERROR_ENABLE (1UL<<29)
#define PIPE_CRC_DONE_ENABLE (1UL<<28)
#define PIPE_GMBUS_EVENT_ENABLE (1UL<<27)
+#define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26)
#define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26)
#define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25)
#define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
#define PIPE_DPST_EVENT_ENABLE (1UL<<23)
+#define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<26)
#define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
#define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
#define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
#define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */
#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17)
+#define PIPEA_HBLANK_INT_EN_VLV (1UL<<16)
#define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16)
+#define SPRITE1_FLIPDONE_INT_STATUS_VLV (1UL<<15)
+#define SPRITE0_FLIPDONE_INT_STATUS_VLV (1UL<<15)
#define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
#define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
#define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11)
+#define PLANE_FLIPDONE_INT_STATUS_VLV (1UL<<10)
#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10)
#define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9)
#define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
@@ -2462,6 +2544,40 @@
#define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL)
#define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT)
+#define VLV_DPFLIPSTAT 0x70028
+#define PIPEB_LINE_COMPARE_STATUS (1<<29)
+#define PIPEB_HLINE_INT_EN (1<<28)
+#define PIPEB_VBLANK_INT_EN (1<<27)
+#define SPRITED_FLIPDONE_INT_EN (1<<26)
+#define SPRITEC_FLIPDONE_INT_EN (1<<25)
+#define PLANEB_FLIPDONE_INT_EN (1<<24)
+#define PIPEA_LINE_COMPARE_STATUS (1<<21)
+#define PIPEA_HLINE_INT_EN (1<<20)
+#define PIPEA_VBLANK_INT_EN (1<<19)
+#define SPRITEB_FLIPDONE_INT_EN (1<<18)
+#define SPRITEA_FLIPDONE_INT_EN (1<<17)
+#define PLANEA_FLIPDONE_INT_EN (1<<16)
+
+#define DPINVGTT 0x7002c /* VLV only */
+#define CURSORB_INVALID_GTT_INT_EN (1<<23)
+#define CURSORA_INVALID_GTT_INT_EN (1<<22)
+#define SPRITED_INVALID_GTT_INT_EN (1<<21)
+#define SPRITEC_INVALID_GTT_INT_EN (1<<20)
+#define PLANEB_INVALID_GTT_INT_EN (1<<19)
+#define SPRITEB_INVALID_GTT_INT_EN (1<<18)
+#define SPRITEA_INVALID_GTT_INT_EN (1<<17)
+#define PLANEA_INVALID_GTT_INT_EN (1<<16)
+#define DPINVGTT_EN_MASK 0xff0000
+#define CURSORB_INVALID_GTT_STATUS (1<<7)
+#define CURSORA_INVALID_GTT_STATUS (1<<6)
+#define SPRITED_INVALID_GTT_STATUS (1<<5)
+#define SPRITEC_INVALID_GTT_STATUS (1<<4)
+#define PLANEB_INVALID_GTT_STATUS (1<<3)
+#define SPRITEB_INVALID_GTT_STATUS (1<<2)
+#define SPRITEA_INVALID_GTT_STATUS (1<<1)
+#define PLANEA_INVALID_GTT_STATUS (1<<0)
+#define DPINVGTT_STATUS_MASK 0xff
+
#define DSPARB 0x70030
#define DSPARB_CSTART_MASK (0x7f << 7)
#define DSPARB_CSTART_SHIFT 7
@@ -2491,11 +2607,28 @@
#define DSPFW_HPLL_CURSOR_MASK (0x3f<<16)
#define DSPFW_HPLL_SR_MASK (0x1ff)
+/* drain latency register values*/
+#define DRAIN_LATENCY_PRECISION_32 32
+#define DRAIN_LATENCY_PRECISION_16 16
+#define VLV_DDL1 0x70050
+#define DDL_CURSORA_PRECISION_32 (1<<31)
+#define DDL_CURSORA_PRECISION_16 (0<<31)
+#define DDL_CURSORA_SHIFT 24
+#define DDL_PLANEA_PRECISION_32 (1<<7)
+#define DDL_PLANEA_PRECISION_16 (0<<7)
+#define VLV_DDL2 0x70054
+#define DDL_CURSORB_PRECISION_32 (1<<31)
+#define DDL_CURSORB_PRECISION_16 (0<<31)
+#define DDL_CURSORB_SHIFT 24
+#define DDL_PLANEB_PRECISION_32 (1<<7)
+#define DDL_PLANEB_PRECISION_16 (0<<7)
+
/* FIFO watermark sizes etc */
#define G4X_FIFO_LINE_SIZE 64
#define I915_FIFO_LINE_SIZE 64
#define I830_FIFO_LINE_SIZE 32
+#define VALLEYVIEW_FIFO_SIZE 255
#define G4X_FIFO_SIZE 127
#define I965_FIFO_SIZE 512
#define I945_FIFO_SIZE 127
@@ -2503,6 +2636,7 @@
#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
+#define VALLEYVIEW_MAX_WM 0xff
#define G4X_MAX_WM 0x3f
#define I915_MAX_WM 0x3f
@@ -2517,6 +2651,7 @@
#define PINEVIEW_CURSOR_DFT_WM 0
#define PINEVIEW_CURSOR_GUARD_WM 5
+#define VALLEYVIEW_CURSOR_MAX_WM 64
#define I965_CURSOR_FIFO 64
#define I965_CURSOR_MAX_WM 32
#define I965_CURSOR_DFT_WM 8
@@ -3064,18 +3199,28 @@
#define DE_PIPEB_VBLANK_IVB (1<<5)
#define DE_PIPEA_VBLANK_IVB (1<<0)
+#define VLV_MASTER_IER 0x4400c /* Gunit master IER */
+#define MASTER_INTERRUPT_ENABLE (1<<31)
+
#define DEISR 0x44000
#define DEIMR 0x44004
#define DEIIR 0x44008
#define DEIER 0x4400c
-/* GT interrupt */
-#define GT_PIPE_NOTIFY (1 << 4)
-#define GT_SYNC_STATUS (1 << 2)
-#define GT_USER_INTERRUPT (1 << 0)
-#define GT_BSD_USER_INTERRUPT (1 << 5)
-#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
-#define GT_BLT_USER_INTERRUPT (1 << 22)
+/* GT interrupt.
+ * Note that for gen6+ the ring-specific interrupt bits do alias with the
+ * corresponding bits in the per-ring interrupt control registers. */
+#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
+#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
+#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
+#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
+#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
+#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
+#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
+#define GT_PIPE_NOTIFY (1 << 4)
+#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
+#define GT_SYNC_STATUS (1 << 2)
+#define GT_USER_INTERRUPT (1 << 0)
#define GTISR 0x44010
#define GTIMR 0x44014
@@ -3328,6 +3473,21 @@
#define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B)
#define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B)
+#define VLV_VIDEO_DIP_CTL_A 0x60220
+#define VLV_VIDEO_DIP_DATA_A 0x60208
+#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210
+
+#define VLV_VIDEO_DIP_CTL_B 0x61170
+#define VLV_VIDEO_DIP_DATA_B 0x61174
+#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178
+
+#define VLV_TVIDEO_DIP_CTL(pipe) \
+ _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B)
+#define VLV_TVIDEO_DIP_DATA(pipe) \
+ _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B)
+#define VLV_TVIDEO_DIP_GCP(pipe) \
+ _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B)
+
#define _TRANS_HTOTAL_B 0xe1000
#define _TRANS_HBLANK_B 0xe1004
#define _TRANS_HSYNC_B 0xe1008
@@ -3548,6 +3708,7 @@
#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
/* or SDVOB */
+#define VLV_HDMIB 0x61140
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
#define TRANSCODER(pipe) ((pipe) << 30)
@@ -3713,6 +3874,8 @@
#define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22)
#define FORCEWAKE 0xA18C
+#define FORCEWAKE_VLV 0x1300b0
+#define FORCEWAKE_ACK_VLV 0x1300b4
#define FORCEWAKE_ACK 0x130090
#define FORCEWAKE_MT 0xa188 /* multi-threaded */
#define FORCEWAKE_MT_ACK 0x130040
@@ -3866,4 +4029,193 @@
#define AUD_CONFIG_PIXEL_CLOCK_HDMI (0xf << 16)
#define AUD_CONFIG_DISABLE_NCTS (1 << 3)
+/* HSW Power Wells */
+#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */
+#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */
+#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */
+#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */
+#define HSW_PWR_WELL_ENABLE (1<<31)
+#define HSW_PWR_WELL_STATE (1<<30)
+#define HSW_PWR_WELL_CTL5 0x45410
+#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31)
+#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20)
+#define HSW_PWR_WELL_FORCE_ON (1<<19)
+#define HSW_PWR_WELL_CTL6 0x45414
+
+/* Per-pipe DDI Function Control */
+#define PIPE_DDI_FUNC_CTL_A 0x60400
+#define PIPE_DDI_FUNC_CTL_B 0x61400
+#define PIPE_DDI_FUNC_CTL_C 0x62400
+#define PIPE_DDI_FUNC_CTL_EDP 0x6F400
+#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
+ PIPE_DDI_FUNC_CTL_A, \
+ PIPE_DDI_FUNC_CTL_B)
+#define PIPE_DDI_FUNC_ENABLE (1<<31)
+/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
+#define PIPE_DDI_PORT_MASK (0xf<<28)
+#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
+#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
+#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
+#define PIPE_DDI_MODE_SELECT_DP_SST (2<<24)
+#define PIPE_DDI_MODE_SELECT_DP_MST (3<<24)
+#define PIPE_DDI_MODE_SELECT_FDI (4<<24)
+#define PIPE_DDI_BPC_8 (0<<20)
+#define PIPE_DDI_BPC_10 (1<<20)
+#define PIPE_DDI_BPC_6 (2<<20)
+#define PIPE_DDI_BPC_12 (3<<20)
+#define PIPE_DDI_BFI_ENABLE (1<<4)
+#define PIPE_DDI_PORT_WIDTH_X1 (0<<1)
+#define PIPE_DDI_PORT_WIDTH_X2 (1<<1)
+#define PIPE_DDI_PORT_WIDTH_X4 (3<<1)
+
+/* DisplayPort Transport Control */
+#define DP_TP_CTL_A 0x64040
+#define DP_TP_CTL_B 0x64140
+#define DP_TP_CTL(port) _PORT(port, \
+ DP_TP_CTL_A, \
+ DP_TP_CTL_B)
+#define DP_TP_CTL_ENABLE (1<<31)
+#define DP_TP_CTL_MODE_SST (0<<27)
+#define DP_TP_CTL_MODE_MST (1<<27)
+#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18)
+#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15)
+#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8)
+#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8)
+#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8)
+#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8)
+
+/* DisplayPort Transport Status */
+#define DP_TP_STATUS_A 0x64044
+#define DP_TP_STATUS_B 0x64144
+#define DP_TP_STATUS(port) _PORT(port, \
+ DP_TP_STATUS_A, \
+ DP_TP_STATUS_B)
+#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12)
+
+/* DDI Buffer Control */
+#define DDI_BUF_CTL_A 0x64000
+#define DDI_BUF_CTL_B 0x64100
+#define DDI_BUF_CTL(port) _PORT(port, \
+ DDI_BUF_CTL_A, \
+ DDI_BUF_CTL_B)
+#define DDI_BUF_CTL_ENABLE (1<<31)
+#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
+#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
+#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
+#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
+#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
+#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
+#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
+#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
+#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
+#define DDI_BUF_EMP_MASK (0xf<<24)
+#define DDI_BUF_IS_IDLE (1<<7)
+#define DDI_PORT_WIDTH_X1 (0<<1)
+#define DDI_PORT_WIDTH_X2 (1<<1)
+#define DDI_PORT_WIDTH_X4 (3<<1)
+#define DDI_INIT_DISPLAY_DETECTED (1<<0)
+
+/* DDI Buffer Translations */
+#define DDI_BUF_TRANS_A 0x64E00
+#define DDI_BUF_TRANS_B 0x64E60
+#define DDI_BUF_TRANS(port) _PORT(port, \
+ DDI_BUF_TRANS_A, \
+ DDI_BUF_TRANS_B)
+
+/* Sideband Interface (SBI) is programmed indirectly, via
+ * SBI_ADDR, which contains the register offset; and SBI_DATA,
+ * which contains the payload */
+#define SBI_ADDR 0xC6000
+#define SBI_DATA 0xC6004
+#define SBI_CTL_STAT 0xC6008
+#define SBI_CTL_OP_CRRD (0x6<<8)
+#define SBI_CTL_OP_CRWR (0x7<<8)
+#define SBI_RESPONSE_FAIL (0x1<<1)
+#define SBI_RESPONSE_SUCCESS (0x0<<1)
+#define SBI_BUSY (0x1<<0)
+#define SBI_READY (0x0<<0)
+
+/* SBI offsets */
+#define SBI_SSCDIVINTPHASE6 0x0600
+#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1)
+#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1)
+#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8)
+#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8)
+#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
+#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0)
+#define SBI_SSCCTL 0x020c
+#define SBI_SSCCTL6 0x060C
+#define SBI_SSCCTL_DISABLE (1<<0)
+#define SBI_SSCAUXDIV6 0x0610
+#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4)
+#define SBI_DBUFF0 0x2a00
+
+/* LPT PIXCLK_GATE */
+#define PIXCLK_GATE 0xC6020
+#define PIXCLK_GATE_UNGATE 1<<0
+#define PIXCLK_GATE_GATE 0<<0
+
+/* SPLL */
+#define SPLL_CTL 0x46020
+#define SPLL_PLL_ENABLE (1<<31)
+#define SPLL_PLL_SCC (1<<28)
+#define SPLL_PLL_NON_SCC (2<<28)
+#define SPLL_PLL_FREQ_810MHz (0<<26)
+#define SPLL_PLL_FREQ_1350MHz (1<<26)
+
+/* WRPLL */
+#define WRPLL_CTL1 0x46040
+#define WRPLL_CTL2 0x46060
+#define WRPLL_PLL_ENABLE (1<<31)
+#define WRPLL_PLL_SELECT_SSC (0x01<<28)
+#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28)
+#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28)
+
+/* Port clock selection */
+#define PORT_CLK_SEL_A 0x46100
+#define PORT_CLK_SEL_B 0x46104
+#define PORT_CLK_SEL(port) _PORT(port, \
+ PORT_CLK_SEL_A, \
+ PORT_CLK_SEL_B)
+#define PORT_CLK_SEL_LCPLL_2700 (0<<29)
+#define PORT_CLK_SEL_LCPLL_1350 (1<<29)
+#define PORT_CLK_SEL_LCPLL_810 (2<<29)
+#define PORT_CLK_SEL_SPLL (3<<29)
+#define PORT_CLK_SEL_WRPLL1 (4<<29)
+#define PORT_CLK_SEL_WRPLL2 (5<<29)
+
+/* Pipe clock selection */
+#define PIPE_CLK_SEL_A 0x46140
+#define PIPE_CLK_SEL_B 0x46144
+#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \
+ PIPE_CLK_SEL_A, \
+ PIPE_CLK_SEL_B)
+/* For each pipe, we need to select the corresponding port clock */
+#define PIPE_CLK_SEL_DISABLED (0x0<<29)
+#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
+
+/* LCPLL Control */
+#define LCPLL_CTL 0x130040
+#define LCPLL_PLL_DISABLE (1<<31)
+#define LCPLL_PLL_LOCK (1<<30)
+#define LCPLL_CD_CLOCK_DISABLE (1<<25)
+#define LCPLL_CD2X_CLOCK_DISABLE (1<<23)
+
+/* Pipe WM_LINETIME - watermark line time */
+#define PIPE_WM_LINETIME_A 0x45270
+#define PIPE_WM_LINETIME_B 0x45274
+#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \
+ PIPE_WM_LINETIME_A, \
+ PIPE_WM_LINETIME_A)
+#define PIPE_WM_LINETIME_MASK (0x1ff)
+#define PIPE_WM_LINETIME_TIME(x) ((x))
+#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16)
+#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16)
+
+/* SFUSE_STRAP */
+#define SFUSE_STRAP 0xc2014
+#define SFUSE_STRAP_DDIB_DETECTED (1<<2)
+#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
+#define SFUSE_STRAP_DDID_DETECTED (1<<0)
+
#endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
index bae3edf956a4..f152b2a7fc54 100644
--- a/drivers/gpu/drm/i915/intel_acpi.c
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -182,8 +182,6 @@ static void intel_dsm_platform_mux_info(void)
DRM_DEBUG_DRIVER(" hpd mux info: %s\n",
intel_dsm_mux_type(info->buffer.pointer[3]));
}
- } else {
- DRM_ERROR("MUX INFO call failed\n");
}
out:
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index b48fc2a8410c..353459362f6f 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -174,6 +174,28 @@ get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
}
+/* get lvds_fp_timing entry
+ * this function may return NULL if the corresponding entry is invalid
+ */
+static const struct lvds_fp_timing *
+get_lvds_fp_timing(const struct bdb_header *bdb,
+ const struct bdb_lvds_lfp_data *data,
+ const struct bdb_lvds_lfp_data_ptrs *ptrs,
+ int index)
+{
+ size_t data_ofs = (const u8 *)data - (const u8 *)bdb;
+ u16 data_size = ((const u16 *)data)[-1]; /* stored in header */
+ size_t ofs;
+
+ if (index >= ARRAY_SIZE(ptrs->ptr))
+ return NULL;
+ ofs = ptrs->ptr[index].fp_timing_offset;
+ if (ofs < data_ofs ||
+ ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size)
+ return NULL;
+ return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
+}
+
/* Try to find integrated panel data */
static void
parse_lfp_panel_data(struct drm_i915_private *dev_priv,
@@ -183,6 +205,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
const struct bdb_lvds_lfp_data *lvds_lfp_data;
const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
const struct lvds_dvo_timing *panel_dvo_timing;
+ const struct lvds_fp_timing *fp_timing;
struct drm_display_mode *panel_fixed_mode;
int i, downclock;
@@ -244,6 +267,19 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
"Normal Clock %dKHz, downclock %dKHz\n",
panel_fixed_mode->clock, 10*downclock);
}
+
+ fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data,
+ lvds_lfp_data_ptrs,
+ lvds_options->panel_type);
+ if (fp_timing) {
+ /* check the resolution, just to be sure */
+ if (fp_timing->x_res == panel_fixed_mode->hdisplay &&
+ fp_timing->y_res == panel_fixed_mode->vdisplay) {
+ dev_priv->bios_lvds_val = fp_timing->lvds_reg_val;
+ DRM_DEBUG_KMS("VBT initial LVDS value %x\n",
+ dev_priv->bios_lvds_val);
+ }
+ }
}
/* Try to find sdvo panel data */
@@ -256,6 +292,11 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
int index;
index = i915_vbt_sdvo_panel_type;
+ if (index == -2) {
+ DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
+ return;
+ }
+
if (index == -1) {
struct bdb_sdvo_lvds_options *sdvo_lvds_options;
@@ -332,11 +373,11 @@ parse_general_definitions(struct drm_i915_private *dev_priv,
if (block_size >= sizeof(*general)) {
int bus_pin = general->crt_ddc_gmbus_pin;
DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
- if (bus_pin >= 1 && bus_pin <= 6)
+ if (intel_gmbus_is_port_valid(bus_pin))
dev_priv->crt_ddc_pin = bus_pin;
} else {
DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
- block_size);
+ block_size);
}
}
}
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 4d3d736a4f56..70b0f1abf149 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -278,9 +278,10 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
struct edid *edid;
bool is_digital = false;
+ struct i2c_adapter *i2c;
- edid = drm_get_edid(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+ edid = drm_get_edid(connector, i2c);
/*
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
@@ -483,15 +484,16 @@ static int intel_crt_get_modes(struct drm_connector *connector)
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
+ struct i2c_adapter *i2c;
- ret = intel_ddc_get_modes(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+ ret = intel_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev))
return ret;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
- return intel_ddc_get_modes(connector,
- &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
+ i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
+ return intel_ddc_get_modes(connector, i2c);
}
static int intel_crt_set_property(struct drm_connector *connector,
@@ -543,7 +545,7 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
{
- DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
+ DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
return 1;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 91b35fd1db8c..37514a52b05c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -24,6 +24,7 @@
* Eric Anholt <eric@anholt.net>
*/
+#include <linux/dmi.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/input.h>
@@ -360,6 +361,110 @@ static const intel_limit_t intel_limits_ironlake_display_port = {
.find_pll = intel_find_pll_ironlake_dp,
};
+u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
+{
+ unsigned long flags;
+ u32 val = 0;
+
+ spin_lock_irqsave(&dev_priv->dpio_lock, flags);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO idle wait timed out\n");
+ goto out_unlock;
+ }
+
+ I915_WRITE(DPIO_REG, reg);
+ I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
+ DPIO_BYTE);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO read wait timed out\n");
+ goto out_unlock;
+ }
+ val = I915_READ(DPIO_DATA);
+
+out_unlock:
+ spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
+ return val;
+}
+
+static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
+ u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->dpio_lock, flags);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+ DRM_ERROR("DPIO idle wait timed out\n");
+ goto out_unlock;
+ }
+
+ I915_WRITE(DPIO_DATA, val);
+ I915_WRITE(DPIO_REG, reg);
+ I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
+ DPIO_BYTE);
+ if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
+ DRM_ERROR("DPIO write wait timed out\n");
+
+out_unlock:
+ spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
+}
+
+static void vlv_init_dpio(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* Reset the DPIO config */
+ I915_WRITE(DPIO_CTL, 0);
+ POSTING_READ(DPIO_CTL);
+ I915_WRITE(DPIO_CTL, 1);
+ POSTING_READ(DPIO_CTL);
+}
+
+static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
+{
+ DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
+ return 1;
+}
+
+static const struct dmi_system_id intel_dual_link_lvds[] = {
+ {
+ .callback = intel_dual_link_lvds_callback,
+ .ident = "Apple MacBook Pro (Core i5/i7 Series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
+ },
+ },
+ { } /* terminating entry */
+};
+
+static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
+ unsigned int reg)
+{
+ unsigned int val;
+
+ /* use the module option value if specified */
+ if (i915_lvds_channel_mode > 0)
+ return i915_lvds_channel_mode == 2;
+
+ if (dmi_check_system(intel_dual_link_lvds))
+ return true;
+
+ if (dev_priv->lvds_val)
+ val = dev_priv->lvds_val;
+ else {
+ /* BIOS should set the proper LVDS register value at boot, but
+ * in reality, it doesn't set the value when the lid is closed;
+ * we need to check "the value to be set" in VBT when LVDS
+ * register is uninitialized.
+ */
+ val = I915_READ(reg);
+ if (!(val & ~LVDS_DETECTED))
+ val = dev_priv->bios_lvds_val;
+ dev_priv->lvds_val = val;
+ }
+ return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
+}
+
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
int refclk)
{
@@ -368,8 +473,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP) {
+ if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
/* LVDS dual channel */
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -397,8 +501,7 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (is_dual_link_lvds(dev_priv, LVDS))
/* LVDS with dual channel */
limit = &intel_limits_g4x_dual_channel_lvds;
else
@@ -536,8 +639,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
* reliably set up different single/dual channel state, if we
* even can.
*/
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (is_dual_link_lvds(dev_priv, LVDS))
clock.p2 = limit->p2.p2_fast;
else
clock.p2 = limit->p2.p2_slow;
@@ -2537,7 +2639,7 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- u32 reg, temp, i;
+ u32 reg, temp, i, retry;
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
for train result */
@@ -2589,15 +2691,19 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
POSTING_READ(reg);
udelay(500);
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_BIT_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG_KMS("FDI train 1 done.\n");
- break;
+ for (retry = 0; retry < 5; retry++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ DRM_DEBUG_KMS("FDI train 1 done.\n");
+ break;
+ }
+ udelay(50);
}
+ if (retry < 5)
+ break;
}
if (i == 4)
DRM_ERROR("FDI train 1 fail!\n");
@@ -2638,15 +2744,19 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
POSTING_READ(reg);
udelay(500);
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_SYMBOL_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done.\n");
- break;
+ for (retry = 0; retry < 5; retry++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done.\n");
+ break;
+ }
+ udelay(50);
}
+ if (retry < 5)
+ break;
}
if (i == 4)
DRM_ERROR("FDI train 2 fail!\n");
@@ -3457,6 +3567,11 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
return true;
}
+static int valleyview_get_display_clock_speed(struct drm_device *dev)
+{
+ return 400000; /* FIXME */
+}
+
static int i945_get_display_clock_speed(struct drm_device *dev)
{
return 400000;
@@ -3606,6 +3721,20 @@ static const struct intel_watermark_params g4x_cursor_wm_info = {
2,
G4X_FIFO_LINE_SIZE,
};
+static const struct intel_watermark_params valleyview_wm_info = {
+ VALLEYVIEW_FIFO_SIZE,
+ VALLEYVIEW_MAX_WM,
+ VALLEYVIEW_MAX_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params valleyview_cursor_wm_info = {
+ I965_CURSOR_FIFO,
+ VALLEYVIEW_CURSOR_MAX_WM,
+ I965_CURSOR_DFT_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
static const struct intel_watermark_params i965_cursor_wm_info = {
I965_CURSOR_FIFO,
I965_CURSOR_MAX_WM,
@@ -4128,8 +4257,134 @@ static bool g4x_compute_srwm(struct drm_device *dev,
display, cursor);
}
+static bool vlv_compute_drain_latency(struct drm_device *dev,
+ int plane,
+ int *plane_prec_mult,
+ int *plane_dl,
+ int *cursor_prec_mult,
+ int *cursor_dl)
+{
+ struct drm_crtc *crtc;
+ int clock, pixel_size;
+ int entries;
+
+ crtc = intel_get_crtc_for_plane(dev, plane);
+ if (crtc->fb == NULL || !crtc->enabled)
+ return false;
+
+ clock = crtc->mode.clock; /* VESA DOT Clock */
+ pixel_size = crtc->fb->bits_per_pixel / 8; /* BPP */
+
+ entries = (clock / 1000) * pixel_size;
+ *plane_prec_mult = (entries > 256) ?
+ DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16;
+ *plane_dl = (64 * (*plane_prec_mult) * 4) / ((clock / 1000) *
+ pixel_size);
+
+ entries = (clock / 1000) * 4; /* BPP is always 4 for cursor */
+ *cursor_prec_mult = (entries > 256) ?
+ DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16;
+ *cursor_dl = (64 * (*cursor_prec_mult) * 4) / ((clock / 1000) * 4);
+
+ return true;
+}
+
+/*
+ * Update drain latency registers of memory arbiter
+ *
+ * Valleyview SoC has a new memory arbiter and needs drain latency registers
+ * to be programmed. Each plane has a drain latency multiplier and a drain
+ * latency value.
+ */
+
+static void vlv_update_drain_latency(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int planea_prec, planea_dl, planeb_prec, planeb_dl;
+ int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl;
+ int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is
+ either 16 or 32 */
+
+ /* For plane A, Cursor A */
+ if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl,
+ &cursor_prec_mult, &cursora_dl)) {
+ cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_16;
+ planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_16;
+
+ I915_WRITE(VLV_DDL1, cursora_prec |
+ (cursora_dl << DDL_CURSORA_SHIFT) |
+ planea_prec | planea_dl);
+ }
+
+ /* For plane B, Cursor B */
+ if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl,
+ &cursor_prec_mult, &cursorb_dl)) {
+ cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_16;
+ planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ?
+ DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_16;
+
+ I915_WRITE(VLV_DDL2, cursorb_prec |
+ (cursorb_dl << DDL_CURSORB_SHIFT) |
+ planeb_prec | planeb_dl);
+ }
+}
+
#define single_plane_enabled(mask) is_power_of_2(mask)
+static void valleyview_update_wm(struct drm_device *dev)
+{
+ static const int sr_latency_ns = 12000;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
+ int plane_sr, cursor_sr;
+ unsigned int enabled = 0;
+
+ vlv_update_drain_latency(dev);
+
+ if (g4x_compute_wm0(dev, 0,
+ &valleyview_wm_info, latency_ns,
+ &valleyview_cursor_wm_info, latency_ns,
+ &planea_wm, &cursora_wm))
+ enabled |= 1;
+
+ if (g4x_compute_wm0(dev, 1,
+ &valleyview_wm_info, latency_ns,
+ &valleyview_cursor_wm_info, latency_ns,
+ &planeb_wm, &cursorb_wm))
+ enabled |= 2;
+
+ plane_sr = cursor_sr = 0;
+ if (single_plane_enabled(enabled) &&
+ g4x_compute_srwm(dev, ffs(enabled) - 1,
+ sr_latency_ns,
+ &valleyview_wm_info,
+ &valleyview_cursor_wm_info,
+ &plane_sr, &cursor_sr))
+ I915_WRITE(FW_BLC_SELF_VLV, FW_CSPWRDWNEN);
+ else
+ I915_WRITE(FW_BLC_SELF_VLV,
+ I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN);
+
+ DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
+ planea_wm, cursora_wm,
+ planeb_wm, cursorb_wm,
+ plane_sr, cursor_sr);
+
+ I915_WRITE(DSPFW1,
+ (plane_sr << DSPFW_SR_SHIFT) |
+ (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+ (planeb_wm << DSPFW_PLANEB_SHIFT) |
+ planea_wm);
+ I915_WRITE(DSPFW2,
+ (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+ (cursora_wm << DSPFW_CURSORA_SHIFT));
+ I915_WRITE(DSPFW3,
+ (I915_READ(DSPFW3) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT)));
+}
+
static void g4x_update_wm(struct drm_device *dev)
{
static const int sr_latency_ns = 12000;
@@ -5113,6 +5368,233 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
}
}
+static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 temp, lvds_sync = 0;
+
+ temp = I915_READ(LVDS);
+ temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+ if (pipe == 1) {
+ temp |= LVDS_PIPEB_SELECT;
+ } else {
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
+ /* set the corresponsding LVDS_BORDER bit */
+ temp |= dev_priv->lvds_border_bits;
+ /* Set the B0-B3 data pairs corresponding to whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock->p2 == 7)
+ temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more thoroughly into how
+ * panels behave in the two modes.
+ */
+ /* set the dithering flag on LVDS as needed */
+ if (INTEL_INFO(dev)->gen >= 4) {
+ if (dev_priv->lvds_dither)
+ temp |= LVDS_ENABLE_DITHER;
+ else
+ temp &= ~LVDS_ENABLE_DITHER;
+ }
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ lvds_sync |= LVDS_HSYNC_POLARITY;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ lvds_sync |= LVDS_VSYNC_POLARITY;
+ if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+ != lvds_sync) {
+ char flags[2] = "-+";
+ DRM_INFO("Changing LVDS panel from "
+ "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+ flags[!(temp & LVDS_HSYNC_POLARITY)],
+ flags[!(temp & LVDS_VSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+ temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+ temp |= lvds_sync;
+ }
+ I915_WRITE(LVDS, temp);
+}
+
+static void i9xx_update_pll(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ intel_clock_t *clock, intel_clock_t *reduced_clock,
+ int num_connectors)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 dpll;
+ bool is_sdvo;
+
+ is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ if (is_sdvo) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (pixel_multiplier > 1) {
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ }
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ }
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ dpll |= DPLL_DVO_HIGH_SPEED;
+
+ /* compute bitmask from p1 value */
+ if (IS_PINEVIEW(dev))
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+ else {
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (IS_G4X(dev) && reduced_clock)
+ dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ }
+ switch (clock->p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+ if (INTEL_INFO(dev)->gen >= 4)
+ dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+
+ if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ /* XXX: just matching BIOS for now */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_VCO_ENABLE;
+ I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ intel_update_lvds(crtc, clock, adjusted_mode);
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
+
+ I915_WRITE(DPLL(pipe), dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ u32 temp = 0;
+ if (is_sdvo) {
+ temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (temp > 1)
+ temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ else
+ temp = 0;
+ }
+ I915_WRITE(DPLL_MD(pipe), temp);
+ } else {
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(DPLL(pipe), dpll);
+ }
+}
+
+static void i8xx_update_pll(struct drm_crtc *crtc,
+ struct drm_display_mode *adjusted_mode,
+ intel_clock_t *clock,
+ int num_connectors)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 dpll;
+
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ } else {
+ if (clock->p1 == 2)
+ dpll |= PLL_P1_DIVIDE_BY_TWO;
+ else
+ dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (clock->p2 == 4)
+ dpll |= PLL_P2_DIVIDE_BY_4;
+ }
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
+ /* XXX: just matching BIOS for now */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_VCO_ENABLE;
+ I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ I915_WRITE(DPLL(pipe), dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+ intel_update_lvds(crtc, clock, adjusted_mode);
+
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(DPLL(pipe), dpll);
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -5126,15 +5608,13 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dpll, dspcntr, pipeconf, vsyncshift;
- bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ u32 dspcntr, pipeconf, vsyncshift;
+ bool ok, has_reduced_clock = false, is_sdvo = false;
+ bool is_lvds = false, is_tv = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;
const intel_limit_t *limit;
int ret;
- u32 temp;
- u32 lvds_sync = 0;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
if (encoder->base.crtc != crtc)
@@ -5150,15 +5630,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
if (encoder->needs_tv_clock)
is_tv = true;
break;
- case INTEL_OUTPUT_DVO:
- is_dvo = true;
- break;
case INTEL_OUTPUT_TVOUT:
is_tv = true;
break;
- case INTEL_OUTPUT_ANALOG:
- is_crt = true;
- break;
case INTEL_OUTPUT_DISPLAYPORT:
is_dp = true;
break;
@@ -5205,71 +5679,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
&reduced_clock : NULL);
- dpll = DPLL_VGA_MODE_DIS;
-
- if (!IS_GEN2(dev)) {
- if (is_lvds)
- dpll |= DPLLB_MODE_LVDS;
- else
- dpll |= DPLLB_MODE_DAC_SERIAL;
- if (is_sdvo) {
- int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (pixel_multiplier > 1) {
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- }
- dpll |= DPLL_DVO_HIGH_SPEED;
- }
- if (is_dp)
- dpll |= DPLL_DVO_HIGH_SPEED;
-
- /* compute bitmask from p1 value */
- if (IS_PINEVIEW(dev))
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
- else {
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- if (IS_G4X(dev) && has_reduced_clock)
- dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
- }
- switch (clock.p2) {
- case 5:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
- break;
- case 7:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
- break;
- case 10:
- dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
- break;
- case 14:
- dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
- break;
- }
- if (INTEL_INFO(dev)->gen >= 4)
- dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
- } else {
- if (is_lvds) {
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- } else {
- if (clock.p1 == 2)
- dpll |= PLL_P1_DIVIDE_BY_TWO;
- else
- dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
- if (clock.p2 == 4)
- dpll |= PLL_P2_DIVIDE_BY_4;
- }
- }
-
- if (is_sdvo && is_tv)
- dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (is_tv)
- /* XXX: just matching BIOS for now */
- /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
- dpll |= 3;
- else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
- dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ if (IS_GEN2(dev))
+ i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
else
- dpll |= PLL_REF_INPUT_DREFCLK;
+ i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
+ has_reduced_clock ? &reduced_clock : NULL,
+ num_connectors);
/* setup pipeconf */
pipeconf = I915_READ(PIPECONF(pipe));
@@ -5306,97 +5721,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
}
}
- dpll |= DPLL_VCO_ENABLE;
-
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
drm_mode_debug_printmodeline(mode);
- I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
-
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- /* The LVDS pin pair needs to be on before the DPLLs are enabled.
- * This is an exception to the general rule that mode_set doesn't turn
- * things on.
- */
- if (is_lvds) {
- temp = I915_READ(LVDS);
- temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (pipe == 1) {
- temp |= LVDS_PIPEB_SELECT;
- } else {
- temp &= ~LVDS_PIPEB_SELECT;
- }
- /* set the corresponsding LVDS_BORDER bit */
- temp |= dev_priv->lvds_border_bits;
- /* Set the B0-B3 data pairs corresponding to whether we're going to
- * set the DPLLs for dual-channel mode or not.
- */
- if (clock.p2 == 7)
- temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
- else
- temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
- /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
- * appropriately here, but we need to look more thoroughly into how
- * panels behave in the two modes.
- */
- /* set the dithering flag on LVDS as needed */
- if (INTEL_INFO(dev)->gen >= 4) {
- if (dev_priv->lvds_dither)
- temp |= LVDS_ENABLE_DITHER;
- else
- temp &= ~LVDS_ENABLE_DITHER;
- }
- if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
- lvds_sync |= LVDS_HSYNC_POLARITY;
- if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
- lvds_sync |= LVDS_VSYNC_POLARITY;
- if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
- != lvds_sync) {
- char flags[2] = "-+";
- DRM_INFO("Changing LVDS panel from "
- "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
- flags[!(temp & LVDS_HSYNC_POLARITY)],
- flags[!(temp & LVDS_VSYNC_POLARITY)],
- flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
- flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
- temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
- temp |= lvds_sync;
- }
- I915_WRITE(LVDS, temp);
- }
-
- if (is_dp) {
- intel_dp_set_m_n(crtc, mode, adjusted_mode);
- }
-
- I915_WRITE(DPLL(pipe), dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(DPLL(pipe));
- udelay(150);
-
- if (INTEL_INFO(dev)->gen >= 4) {
- temp = 0;
- if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
- }
- I915_WRITE(DPLL_MD(pipe), temp);
- } else {
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(DPLL(pipe), dpll);
- }
-
if (HAS_PIPE_CXSR(dev)) {
if (intel_crtc->lowfreq_avail) {
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
@@ -7796,7 +8123,7 @@ static void intel_setup_outputs(struct drm_device *dev)
if (I915_READ(HDMIB) & PORT_DETECTED) {
/* PCH SDVOB multiplex with HDMIB */
- found = intel_sdvo_init(dev, PCH_SDVOB);
+ found = intel_sdvo_init(dev, PCH_SDVOB, true);
if (!found)
intel_hdmi_init(dev, HDMIB);
if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
@@ -7820,7 +8147,7 @@ static void intel_setup_outputs(struct drm_device *dev)
if (I915_READ(SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOB\n");
- found = intel_sdvo_init(dev, SDVOB);
+ found = intel_sdvo_init(dev, SDVOB, true);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, SDVOB);
@@ -7836,7 +8163,7 @@ static void intel_setup_outputs(struct drm_device *dev)
if (I915_READ(SDVOB) & SDVO_DETECTED) {
DRM_DEBUG_KMS("probing SDVOC\n");
- found = intel_sdvo_init(dev, SDVOC);
+ found = intel_sdvo_init(dev, SDVOC, false);
}
if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
@@ -8617,6 +8944,54 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
}
}
+static void valleyview_init_clock_gating(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe;
+ uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+ I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+ I915_WRITE(WM3_LP_ILK, 0);
+ I915_WRITE(WM2_LP_ILK, 0);
+ I915_WRITE(WM1_LP_ILK, 0);
+
+ /* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
+ I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
+
+ I915_WRITE(IVB_CHICKEN3,
+ CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
+ CHICKEN3_DGMG_DONE_FIX_DISABLE);
+
+ /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+ /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+ I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE);
+
+ /* This is required by WaCatErrorRejectionIssue */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
+ for_each_pipe(pipe) {
+ I915_WRITE(DSPCNTR(pipe),
+ I915_READ(DSPCNTR(pipe)) |
+ DISPPLANE_TRICKLE_FEED_DISABLE);
+ intel_flush_display_plane(dev_priv, pipe);
+ }
+
+ I915_WRITE(CACHE_MODE_1, I915_READ(CACHE_MODE_1) |
+ (PIXEL_SUBSPAN_COLLECT_OPT_DISABLE << 16) |
+ PIXEL_SUBSPAN_COLLECT_OPT_DISABLE);
+}
+
static void g4x_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -8871,7 +9246,10 @@ static void intel_init_display(struct drm_device *dev)
}
/* Returns the core display clock speed */
- if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+ if (IS_VALLEYVIEW(dev))
+ dev_priv->display.get_display_clock_speed =
+ valleyview_get_display_clock_speed;
+ else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
else if (IS_I915G(dev))
@@ -8966,6 +9344,12 @@ static void intel_init_display(struct drm_device *dev)
dev_priv->display.write_eld = ironlake_write_eld;
} else
dev_priv->display.update_wm = NULL;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->display.update_wm = valleyview_update_wm;
+ dev_priv->display.init_clock_gating =
+ valleyview_init_clock_gating;
+ dev_priv->display.force_wake_get = vlv_force_wake_get;
+ dev_priv->display.force_wake_put = vlv_force_wake_put;
} else if (IS_PINEVIEW(dev)) {
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
dev_priv->is_ddr3,
@@ -9049,7 +9433,7 @@ static void quirk_pipea_force(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->quirks |= QUIRK_PIPEA_FORCE;
- DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+ DRM_INFO("applying pipe a force quirk\n");
}
/*
@@ -9059,6 +9443,18 @@ static void quirk_ssc_force_disable(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+ DRM_INFO("applying lvds SSC disable quirk\n");
+}
+
+/*
+ * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
+ * brightness value
+ */
+static void quirk_invert_brightness(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
+ DRM_INFO("applying inverted panel brightness quirk\n");
}
struct intel_quirk {
@@ -9093,6 +9489,9 @@ struct intel_quirk intel_quirks[] = {
/* Sony Vaio Y cannot use SSC on LVDS */
{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
+
+ /* Acer Aspire 5734Z must invert backlight brightness */
+ { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
};
static void intel_init_quirks(struct drm_device *dev)
@@ -9236,6 +9635,9 @@ void intel_modeset_cleanup(struct drm_device *dev)
if (IS_IRONLAKE_M(dev))
ironlake_disable_rc6(dev);
+ if (IS_VALLEYVIEW(dev))
+ vlv_init_dpio(dev);
+
mutex_unlock(&dev->struct_mutex);
/* Disable the irq before mode object teardown, for the irq might
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 5a14149b3794..79cabf58d877 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -45,6 +45,18 @@
ret__; \
})
+#define wait_for_atomic_us(COND, US) ({ \
+ int i, ret__ = -ETIMEDOUT; \
+ for (i = 0; i < (US); i++) { \
+ if ((COND)) { \
+ ret__ = 0; \
+ break; \
+ } \
+ udelay(1); \
+ } \
+ ret__; \
+})
+
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
@@ -293,7 +305,8 @@ extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector)
extern void intel_crt_init(struct drm_device *dev);
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
void intel_dip_infoframe_csum(struct dip_infoframe *avi_if);
-extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
+extern bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg,
+ bool is_sdvob);
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_mark_busy(struct drm_device *dev,
@@ -419,4 +432,6 @@ extern int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
extern int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg);
+
#endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 020a7d7f744d..60ba50b956f2 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -243,7 +243,7 @@ static int intel_dvo_get_modes(struct drm_connector *connector)
* that's not the case.
*/
intel_ddc_get_modes(connector,
- &dev_priv->gmbus[GMBUS_PORT_DPC].adapter);
+ intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
if (!list_empty(&connector->probed_modes))
return 1;
@@ -375,7 +375,7 @@ void intel_dvo_init(struct drm_device *dev)
* special cases, but otherwise default to what's defined
* in the spec.
*/
- if (dvo->gpio != 0)
+ if (intel_gmbus_is_port_valid(dvo->gpio))
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
gpio = GMBUS_PORT_SSC;
@@ -386,7 +386,7 @@ void intel_dvo_init(struct drm_device *dev)
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
- i2c = &dev_priv->gmbus[gpio].adapter;
+ i2c = intel_gmbus_get_adapter(dev_priv, gpio);
intel_dvo->dev = *dvo;
if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index cae3e5f17a49..7de2d3b85b32 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -177,6 +177,37 @@ static void ironlake_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
}
+
+static void vlv_write_infoframe(struct drm_encoder *encoder,
+ struct dip_infoframe *frame)
+{
+ uint32_t *data = (uint32_t *)frame;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
+ unsigned i, len = DIP_HEADER_SIZE + frame->len;
+ u32 flags, val = I915_READ(reg);
+
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+ flags = intel_infoframe_index(frame);
+
+ val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
+
+ I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
+
+ for (i = 0; i < len; i += 4) {
+ I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
+ data++;
+ }
+
+ flags |= intel_infoframe_flags(frame);
+
+ I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
+}
+
static void intel_set_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
@@ -334,7 +365,8 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
edid = drm_get_edid(connector,
- &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
@@ -367,7 +399,8 @@ static int intel_hdmi_get_modes(struct drm_connector *connector)
*/
return intel_ddc_get_modes(connector,
- &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ intel_hdmi->ddc_bus));
}
static bool
@@ -379,7 +412,8 @@ intel_hdmi_detect_audio(struct drm_connector *connector)
bool has_audio = false;
edid = drm_get_edid(connector,
- &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL)
has_audio = drm_detect_monitor_audio(edid);
@@ -549,7 +583,11 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
if (!HAS_PCH_SPLIT(dev)) {
intel_hdmi->write_infoframe = i9xx_write_infoframe;
I915_WRITE(VIDEO_DIP_CTL, 0);
- } else {
+ } else if (IS_VALLEYVIEW(dev)) {
+ intel_hdmi->write_infoframe = vlv_write_infoframe;
+ for_each_pipe(i)
+ I915_WRITE(VLV_TVIDEO_DIP_CTL(i), 0);
+ } else {
intel_hdmi->write_infoframe = ironlake_write_infoframe;
for_each_pipe(i)
I915_WRITE(TVIDEO_DIP_CTL(i), 0);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 601c86e664af..c12db7265893 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -35,6 +35,20 @@
#include "i915_drm.h"
#include "i915_drv.h"
+struct gmbus_port {
+ const char *name;
+ int reg;
+};
+
+static const struct gmbus_port gmbus_ports[] = {
+ { "ssc", GPIOB },
+ { "vga", GPIOA },
+ { "panel", GPIOC },
+ { "dpc", GPIOD },
+ { "dpb", GPIOE },
+ { "dpd", GPIOF },
+};
+
/* Intel GPIO access functions */
#define I2C_RISEFALL_TIME 10
@@ -49,10 +63,7 @@ void
intel_i2c_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (HAS_PCH_SPLIT(dev))
- I915_WRITE(PCH_GMBUS0, 0);
- else
- I915_WRITE(GMBUS0, 0);
+ I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0);
}
static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
@@ -140,65 +151,132 @@ static void set_data(void *data, int state_high)
POSTING_READ(bus->gpio_reg);
}
-static bool
+static int
+intel_gpio_pre_xfer(struct i2c_adapter *adapter)
+{
+ struct intel_gmbus *bus = container_of(adapter,
+ struct intel_gmbus,
+ adapter);
+ struct drm_i915_private *dev_priv = bus->dev_priv;
+
+ intel_i2c_reset(dev_priv->dev);
+ intel_i2c_quirk_set(dev_priv, true);
+ set_data(bus, 1);
+ set_clock(bus, 1);
+ udelay(I2C_RISEFALL_TIME);
+ return 0;
+}
+
+static void
+intel_gpio_post_xfer(struct i2c_adapter *adapter)
+{
+ struct intel_gmbus *bus = container_of(adapter,
+ struct intel_gmbus,
+ adapter);
+ struct drm_i915_private *dev_priv = bus->dev_priv;
+
+ set_data(bus, 1);
+ set_clock(bus, 1);
+ intel_i2c_quirk_set(dev_priv, false);
+}
+
+static void
intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
{
struct drm_i915_private *dev_priv = bus->dev_priv;
- static const int map_pin_to_reg[] = {
- 0,
- GPIOB,
- GPIOA,
- GPIOC,
- GPIOD,
- GPIOE,
- 0,
- GPIOF,
- };
struct i2c_algo_bit_data *algo;
- if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
- return false;
-
algo = &bus->bit_algo;
- bus->gpio_reg = map_pin_to_reg[pin];
- if (HAS_PCH_SPLIT(dev_priv->dev))
- bus->gpio_reg += PCH_GPIOA - GPIOA;
+ /* -1 to map pin pair to gmbus index */
+ bus->gpio_reg = dev_priv->gpio_mmio_base + gmbus_ports[pin - 1].reg;
bus->adapter.algo_data = algo;
algo->setsda = set_data;
algo->setscl = set_clock;
algo->getsda = get_data;
algo->getscl = get_clock;
+ algo->pre_xfer = intel_gpio_pre_xfer;
+ algo->post_xfer = intel_gpio_post_xfer;
algo->udelay = I2C_RISEFALL_TIME;
algo->timeout = usecs_to_jiffies(2200);
algo->data = bus;
-
- return true;
}
static int
-intel_i2c_quirk_xfer(struct intel_gmbus *bus,
- struct i2c_msg *msgs,
- int num)
+gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
+ bool last)
{
- struct drm_i915_private *dev_priv = bus->dev_priv;
- int ret;
+ int reg_offset = dev_priv->gpio_mmio_base;
+ u16 len = msg->len;
+ u8 *buf = msg->buf;
+
+ I915_WRITE(GMBUS1 + reg_offset,
+ GMBUS_CYCLE_WAIT |
+ (last ? GMBUS_CYCLE_STOP : 0) |
+ (len << GMBUS_BYTE_COUNT_SHIFT) |
+ (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
+ GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+ POSTING_READ(GMBUS2 + reg_offset);
+ do {
+ u32 val, loop = 0;
+
+ if (wait_for(I915_READ(GMBUS2 + reg_offset) &
+ (GMBUS_SATOER | GMBUS_HW_RDY),
+ 50))
+ return -ETIMEDOUT;
+ if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ return -ENXIO;
- intel_i2c_reset(dev_priv->dev);
+ val = I915_READ(GMBUS3 + reg_offset);
+ do {
+ *buf++ = val & 0xff;
+ val >>= 8;
+ } while (--len && ++loop < 4);
+ } while (len);
- intel_i2c_quirk_set(dev_priv, true);
- set_data(bus, 1);
- set_clock(bus, 1);
- udelay(I2C_RISEFALL_TIME);
+ return 0;
+}
- ret = i2c_bit_algo.master_xfer(&bus->adapter, msgs, num);
+static int
+gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
+ bool last)
+{
+ int reg_offset = dev_priv->gpio_mmio_base;
+ u16 len = msg->len;
+ u8 *buf = msg->buf;
+ u32 val, loop;
+
+ val = loop = 0;
+ do {
+ val |= *buf++ << (8 * loop);
+ } while (--len && ++loop < 4);
+
+ I915_WRITE(GMBUS3 + reg_offset, val);
+ I915_WRITE(GMBUS1 + reg_offset,
+ GMBUS_CYCLE_WAIT |
+ (last ? GMBUS_CYCLE_STOP : 0) |
+ (msg->len << GMBUS_BYTE_COUNT_SHIFT) |
+ (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
+ GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+ POSTING_READ(GMBUS2 + reg_offset);
+ while (len) {
+ if (wait_for(I915_READ(GMBUS2 + reg_offset) &
+ (GMBUS_SATOER | GMBUS_HW_RDY),
+ 50))
+ return -ETIMEDOUT;
+ if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ return -ENXIO;
- set_data(bus, 1);
- set_clock(bus, 1);
- intel_i2c_quirk_set(dev_priv, false);
+ val = loop = 0;
+ do {
+ val |= *buf++ << (8 * loop);
+ } while (--len && ++loop < 4);
- return ret;
+ I915_WRITE(GMBUS3 + reg_offset, val);
+ POSTING_READ(GMBUS2 + reg_offset);
+ }
+ return 0;
}
static int
@@ -215,74 +293,31 @@ gmbus_xfer(struct i2c_adapter *adapter,
mutex_lock(&dev_priv->gmbus_mutex);
if (bus->force_bit) {
- ret = intel_i2c_quirk_xfer(bus, msgs, num);
+ ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
goto out;
}
- reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
+ reg_offset = dev_priv->gpio_mmio_base;
I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
for (i = 0; i < num; i++) {
- u16 len = msgs[i].len;
- u8 *buf = msgs[i].buf;
-
- if (msgs[i].flags & I2C_M_RD) {
- I915_WRITE(GMBUS1 + reg_offset,
- GMBUS_CYCLE_WAIT |
- (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
- (len << GMBUS_BYTE_COUNT_SHIFT) |
- (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
- GMBUS_SLAVE_READ | GMBUS_SW_RDY);
- POSTING_READ(GMBUS2+reg_offset);
- do {
- u32 val, loop = 0;
-
- if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
- goto timeout;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
- goto clear_err;
-
- val = I915_READ(GMBUS3 + reg_offset);
- do {
- *buf++ = val & 0xff;
- val >>= 8;
- } while (--len && ++loop < 4);
- } while (len);
- } else {
- u32 val, loop;
-
- val = loop = 0;
- do {
- val |= *buf++ << (8 * loop);
- } while (--len && ++loop < 4);
-
- I915_WRITE(GMBUS3 + reg_offset, val);
- I915_WRITE(GMBUS1 + reg_offset,
- GMBUS_CYCLE_WAIT |
- (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
- (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
- (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
- GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
- POSTING_READ(GMBUS2+reg_offset);
-
- while (len) {
- if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
- goto timeout;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
- goto clear_err;
-
- val = loop = 0;
- do {
- val |= *buf++ << (8 * loop);
- } while (--len && ++loop < 4);
-
- I915_WRITE(GMBUS3 + reg_offset, val);
- POSTING_READ(GMBUS2+reg_offset);
- }
- }
-
- if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
+ bool last = i + 1 == num;
+
+ if (msgs[i].flags & I2C_M_RD)
+ ret = gmbus_xfer_read(dev_priv, &msgs[i], last);
+ else
+ ret = gmbus_xfer_write(dev_priv, &msgs[i], last);
+
+ if (ret == -ETIMEDOUT)
+ goto timeout;
+ if (ret == -ENXIO)
+ goto clear_err;
+
+ if (!last &&
+ wait_for(I915_READ(GMBUS2 + reg_offset) &
+ (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
+ 50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
goto clear_err;
@@ -304,23 +339,21 @@ done:
* till then let it sleep.
*/
if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, 10))
- DRM_INFO("GMBUS timed out waiting for idle\n");
+ DRM_INFO("GMBUS [%s] timed out waiting for idle\n",
+ bus->adapter.name);
I915_WRITE(GMBUS0 + reg_offset, 0);
ret = i;
goto out;
timeout:
- DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
- bus->reg0 & 0xff, bus->adapter.name);
+ DRM_INFO("GMBUS [%s] timed out, falling back to bit banging on pin %d\n",
+ bus->adapter.name, bus->reg0 & 0xff);
I915_WRITE(GMBUS0 + reg_offset, 0);
/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
- if (!bus->has_gpio) {
- ret = -EIO;
- } else {
- bus->force_bit = true;
- ret = intel_i2c_quirk_xfer(bus, msgs, num);
- }
+ bus->force_bit = true;
+ ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
+
out:
mutex_unlock(&dev_priv->gmbus_mutex);
return ret;
@@ -346,35 +379,26 @@ static const struct i2c_algorithm gmbus_algorithm = {
*/
int intel_setup_gmbus(struct drm_device *dev)
{
- static const char *names[GMBUS_NUM_PORTS] = {
- "disabled",
- "ssc",
- "vga",
- "panel",
- "dpc",
- "dpb",
- "reserved",
- "dpd",
- };
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
- dev_priv->gmbus = kcalloc(GMBUS_NUM_PORTS, sizeof(struct intel_gmbus),
- GFP_KERNEL);
- if (dev_priv->gmbus == NULL)
- return -ENOMEM;
+ if (HAS_PCH_SPLIT(dev))
+ dev_priv->gpio_mmio_base = PCH_GPIOA - GPIOA;
+ else
+ dev_priv->gpio_mmio_base = 0;
mutex_init(&dev_priv->gmbus_mutex);
for (i = 0; i < GMBUS_NUM_PORTS; i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
+ u32 port = i + 1; /* +1 to map gmbus index to pin pair */
bus->adapter.owner = THIS_MODULE;
bus->adapter.class = I2C_CLASS_DDC;
snprintf(bus->adapter.name,
sizeof(bus->adapter.name),
"i915 gmbus %s",
- names[i]);
+ gmbus_ports[i].name);
bus->adapter.dev.parent = &dev->pdev->dev;
bus->dev_priv = dev_priv;
@@ -385,13 +409,9 @@ int intel_setup_gmbus(struct drm_device *dev)
goto err;
/* By default use a conservative clock rate */
- bus->reg0 = i | GMBUS_RATE_100KHZ;
-
- bus->has_gpio = intel_gpio_setup(bus, i);
+ bus->reg0 = port | GMBUS_RATE_100KHZ;
- /* XXX force bit banging until GMBUS is fully debugged */
- if (bus->has_gpio && IS_GEN2(dev))
- bus->force_bit = true;
+ intel_gpio_setup(bus, port);
}
intel_i2c_reset(dev_priv->dev);
@@ -403,11 +423,18 @@ err:
struct intel_gmbus *bus = &dev_priv->gmbus[i];
i2c_del_adapter(&bus->adapter);
}
- kfree(dev_priv->gmbus);
- dev_priv->gmbus = NULL;
return ret;
}
+struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv,
+ unsigned port)
+{
+ WARN_ON(!intel_gmbus_is_port_valid(port));
+ /* -1 to map pin pair to gmbus index */
+ return (intel_gmbus_is_port_valid(port)) ?
+ &dev_priv->gmbus[port - 1].adapter : NULL;
+}
+
void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
@@ -419,8 +446,7 @@ void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
- if (bus->has_gpio)
- bus->force_bit = force_bit;
+ bus->force_bit = force_bit;
}
void intel_teardown_gmbus(struct drm_device *dev)
@@ -435,7 +461,4 @@ void intel_teardown_gmbus(struct drm_device *dev)
struct intel_gmbus *bus = &dev_priv->gmbus[i];
i2c_del_adapter(&bus->adapter);
}
-
- kfree(dev_priv->gmbus);
- dev_priv->gmbus = NULL;
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 95db2e988227..17a4630cec8a 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -474,7 +474,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
{
- DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
+ DRM_INFO("Skipping forced modeset for %s\n", id->ident);
return 1;
}
@@ -622,7 +622,7 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
- DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
+ DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
@@ -845,8 +845,8 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
child->device_type != DEVICE_TYPE_LFP)
continue;
- if (child->i2c_pin)
- *i2c_pin = child->i2c_pin;
+ if (intel_gmbus_is_port_valid(child->i2c_pin))
+ *i2c_pin = child->i2c_pin;
/* However, we cannot trust the BIOS writers to populate
* the VBT correctly. Since LVDS requires additional
@@ -987,7 +987,8 @@ bool intel_lvds_init(struct drm_device *dev)
* preferred mode is the right one.
*/
intel_lvds->edid = drm_get_edid(connector,
- &dev_priv->gmbus[pin].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ pin));
if (intel_lvds->edid) {
if (drm_add_edid_modes(connector,
intel_lvds->edid)) {
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index d1928e79d9b6..d67ec3a51e42 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -56,7 +56,8 @@ bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus)
}
};
- return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
+ return i2c_transfer(intel_gmbus_get_adapter(dev_priv, ddc_bus),
+ msgs, 2) == 2;
}
/**
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 289140bc83cb..34929aeca66b 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -25,6 +25,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/acpi.h>
#include <linux/acpi_io.h>
#include <acpi/video.h>
@@ -355,7 +357,7 @@ static void intel_didl_outputs(struct drm_device *dev)
}
if (!acpi_video_bus) {
- printk(KERN_WARNING "No ACPI video bus found\n");
+ pr_warn("No ACPI video bus found\n");
return;
}
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 230a141dbea3..cad45ff8251b 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -28,6 +28,9 @@
* Chris Wilson <chris@chris-wilson.co.uk>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/moduleparam.h>
#include "intel_drv.h"
#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
@@ -171,7 +174,7 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
/* XXX add code here to query mode clock or hardware clock
* and program max PWM appropriately.
*/
- printk_once(KERN_WARNING "fixme: max PWM is zero.\n");
+ pr_warn_once("fixme: max PWM is zero\n");
return 1;
}
@@ -191,6 +194,27 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
return max;
}
+static int i915_panel_invert_brightness;
+MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness "
+ "(-1 force normal, 0 machine defaults, 1 force inversion), please "
+ "report PCI device ID, subsystem vendor and subsystem device ID "
+ "to dri-devel@lists.freedesktop.org, if your machine needs it. "
+ "It will then be included in an upcoming module version.");
+module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600);
+static u32 intel_panel_compute_brightness(struct drm_device *dev, u32 val)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (i915_panel_invert_brightness < 0)
+ return val;
+
+ if (i915_panel_invert_brightness > 0 ||
+ dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS)
+ return intel_panel_get_max_backlight(dev) - val;
+
+ return val;
+}
+
u32 intel_panel_get_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -211,6 +235,7 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
}
}
+ val = intel_panel_compute_brightness(dev, val);
DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
return val;
}
@@ -228,6 +253,7 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level
u32 tmp;
DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
+ level = intel_panel_compute_brightness(dev, level);
if (HAS_PCH_SPLIT(dev))
return intel_pch_panel_set_backlight(dev, level);
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index e25581a9f60f..dfdb613752c5 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -290,9 +290,9 @@ static int init_ring_common(struct intel_ring_buffer *ring)
| RING_VALID);
/* If the head is still not zero, the ring is dead */
- if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
- I915_READ_START(ring) != obj->gtt_offset ||
- (I915_READ_HEAD(ring) & HEAD_ADDR) != 0) {
+ if (wait_for((I915_READ_CTL(ring) & RING_VALID) != 0 &&
+ I915_READ_START(ring) == obj->gtt_offset &&
+ (I915_READ_HEAD(ring) & HEAD_ADDR) == 0, 50)) {
DRM_ERROR("%s initialization failed "
"ctl %08x head %08x tail %08x start %08x\n",
ring->name,
@@ -687,7 +687,7 @@ render_ring_get_irq(struct intel_ring_buffer *ring)
spin_lock(&ring->irq_lock);
if (ring->irq_refcount++ == 0) {
- if (HAS_PCH_SPLIT(dev))
+ if (INTEL_INFO(dev)->gen >= 5)
ironlake_enable_irq(dev_priv,
GT_PIPE_NOTIFY | GT_USER_INTERRUPT);
else
@@ -706,7 +706,7 @@ render_ring_put_irq(struct intel_ring_buffer *ring)
spin_lock(&ring->irq_lock);
if (--ring->irq_refcount == 0) {
- if (HAS_PCH_SPLIT(dev))
+ if (INTEL_INFO(dev)->gen >= 5)
ironlake_disable_irq(dev_priv,
GT_USER_INTERRUPT |
GT_PIPE_NOTIFY);
@@ -788,10 +788,11 @@ ring_add_request(struct intel_ring_buffer *ring,
}
static bool
-gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+gen6_ring_get_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 mask = ring->irq_enable;
if (!dev->irq_enabled)
return false;
@@ -803,9 +804,9 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
spin_lock(&ring->irq_lock);
if (ring->irq_refcount++ == 0) {
- ring->irq_mask &= ~rflag;
+ ring->irq_mask &= ~mask;
I915_WRITE_IMR(ring, ring->irq_mask);
- ironlake_enable_irq(dev_priv, gflag);
+ ironlake_enable_irq(dev_priv, mask);
}
spin_unlock(&ring->irq_lock);
@@ -813,16 +814,17 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
}
static void
-gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+gen6_ring_put_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 mask = ring->irq_enable;
spin_lock(&ring->irq_lock);
if (--ring->irq_refcount == 0) {
- ring->irq_mask |= rflag;
+ ring->irq_mask |= mask;
I915_WRITE_IMR(ring, ring->irq_mask);
- ironlake_disable_irq(dev_priv, gflag);
+ ironlake_disable_irq(dev_priv, mask);
}
spin_unlock(&ring->irq_lock);
@@ -1361,38 +1363,6 @@ gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
return 0;
}
-static bool
-gen6_render_ring_get_irq(struct intel_ring_buffer *ring)
-{
- return gen6_ring_get_irq(ring,
- GT_USER_INTERRUPT,
- GEN6_RENDER_USER_INTERRUPT);
-}
-
-static void
-gen6_render_ring_put_irq(struct intel_ring_buffer *ring)
-{
- return gen6_ring_put_irq(ring,
- GT_USER_INTERRUPT,
- GEN6_RENDER_USER_INTERRUPT);
-}
-
-static bool
-gen6_bsd_ring_get_irq(struct intel_ring_buffer *ring)
-{
- return gen6_ring_get_irq(ring,
- GT_GEN6_BSD_USER_INTERRUPT,
- GEN6_BSD_USER_INTERRUPT);
-}
-
-static void
-gen6_bsd_ring_put_irq(struct intel_ring_buffer *ring)
-{
- return gen6_ring_put_irq(ring,
- GT_GEN6_BSD_USER_INTERRUPT,
- GEN6_BSD_USER_INTERRUPT);
-}
-
/* ring buffer for Video Codec for Gen6+ */
static const struct intel_ring_buffer gen6_bsd_ring = {
.name = "gen6 bsd ring",
@@ -1404,8 +1374,9 @@ static const struct intel_ring_buffer gen6_bsd_ring = {
.flush = gen6_ring_flush,
.add_request = gen6_add_request,
.get_seqno = gen6_ring_get_seqno,
- .irq_get = gen6_bsd_ring_get_irq,
- .irq_put = gen6_bsd_ring_put_irq,
+ .irq_enable = GEN6_BSD_USER_INTERRUPT,
+ .irq_get = gen6_ring_get_irq,
+ .irq_put = gen6_ring_put_irq,
.dispatch_execbuffer = gen6_ring_dispatch_execbuffer,
.sync_to = gen6_bsd_ring_sync_to,
.semaphore_register = {MI_SEMAPHORE_SYNC_VR,
@@ -1416,22 +1387,6 @@ static const struct intel_ring_buffer gen6_bsd_ring = {
/* Blitter support (SandyBridge+) */
-static bool
-blt_ring_get_irq(struct intel_ring_buffer *ring)
-{
- return gen6_ring_get_irq(ring,
- GT_BLT_USER_INTERRUPT,
- GEN6_BLITTER_USER_INTERRUPT);
-}
-
-static void
-blt_ring_put_irq(struct intel_ring_buffer *ring)
-{
- gen6_ring_put_irq(ring,
- GT_BLT_USER_INTERRUPT,
- GEN6_BLITTER_USER_INTERRUPT);
-}
-
static int blt_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate, u32 flush)
{
@@ -1463,8 +1418,9 @@ static const struct intel_ring_buffer gen6_blt_ring = {
.flush = blt_ring_flush,
.add_request = gen6_add_request,
.get_seqno = gen6_ring_get_seqno,
- .irq_get = blt_ring_get_irq,
- .irq_put = blt_ring_put_irq,
+ .irq_get = gen6_ring_get_irq,
+ .irq_put = gen6_ring_put_irq,
+ .irq_enable = GEN6_BLITTER_USER_INTERRUPT,
.dispatch_execbuffer = gen6_ring_dispatch_execbuffer,
.sync_to = gen6_blt_ring_sync_to,
.semaphore_register = {MI_SEMAPHORE_SYNC_BR,
@@ -1482,8 +1438,9 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
if (INTEL_INFO(dev)->gen >= 6) {
ring->add_request = gen6_add_request;
ring->flush = gen6_render_ring_flush;
- ring->irq_get = gen6_render_ring_get_irq;
- ring->irq_put = gen6_render_ring_put_irq;
+ ring->irq_get = gen6_ring_get_irq;
+ ring->irq_put = gen6_ring_put_irq;
+ ring->irq_enable = GT_USER_INTERRUPT;
ring->get_seqno = gen6_ring_get_seqno;
} else if (IS_GEN5(dev)) {
ring->add_request = pc_render_add_request;
@@ -1506,8 +1463,9 @@ int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size)
*ring = render_ring;
if (INTEL_INFO(dev)->gen >= 6) {
ring->add_request = gen6_add_request;
- ring->irq_get = gen6_render_ring_get_irq;
- ring->irq_put = gen6_render_ring_put_irq;
+ ring->irq_get = gen6_ring_get_irq;
+ ring->irq_put = gen6_ring_put_irq;
+ ring->irq_enable = GT_USER_INTERRUPT;
} else if (IS_GEN5(dev)) {
ring->add_request = pc_render_add_request;
ring->get_seqno = pc_render_get_seqno;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index bc0365b8fa4d..3488a5a127db 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -59,6 +59,7 @@ struct intel_ring_buffer {
spinlock_t irq_lock;
u32 irq_refcount;
u32 irq_mask;
+ u32 irq_enable; /* IRQs enabled for this ring */
u32 irq_seqno; /* last seq seem at irq time */
u32 trace_irq_seqno;
u32 waiting_seqno;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index e36b171c1e7d..6898145b44ce 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -41,7 +41,7 @@
#define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)
#define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1)
#define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1)
-#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0)
+#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_YPRPB0)
#define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\
SDVO_TV_MASK)
@@ -74,7 +74,7 @@ struct intel_sdvo {
struct i2c_adapter ddc;
/* Register for the SDVO device: SDVOB or SDVOC */
- int sdvo_reg;
+ uint32_t sdvo_reg;
/* Active outputs controlled by this SDVO output */
uint16_t controlled_output;
@@ -114,6 +114,9 @@ struct intel_sdvo {
*/
bool is_tv;
+ /* On different gens SDVOB is at different places. */
+ bool is_sdvob;
+
/* This is for current tv format name */
int tv_format_index;
@@ -403,8 +406,7 @@ static const struct _sdvo_cmd_name {
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
};
-#define IS_SDVOB(reg) (reg == SDVOB || reg == PCH_SDVOB)
-#define SDVO_NAME(svdo) (IS_SDVOB((svdo)->sdvo_reg) ? "SDVOB" : "SDVOC")
+#define SDVO_NAME(svdo) ((svdo)->is_sdvob ? "SDVOB" : "SDVOC")
static void intel_sdvo_debug_write(struct intel_sdvo *intel_sdvo, u8 cmd,
const void *args, int args_len)
@@ -1252,7 +1254,8 @@ intel_sdvo_get_analog_edid(struct drm_connector *connector)
struct drm_i915_private *dev_priv = connector->dev->dev_private;
return drm_get_edid(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ dev_priv->crt_ddc_pin));
}
enum drm_connector_status
@@ -1341,8 +1344,7 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
return connector_status_unknown;
/* add 30ms delay when the output type might be TV */
- if (intel_sdvo->caps.output_flags &
- (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0))
+ if (intel_sdvo->caps.output_flags & SDVO_TV_MASK)
mdelay(30);
if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
@@ -1893,7 +1895,7 @@ intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv,
{
struct sdvo_device_mapping *mapping;
- if (IS_SDVOB(reg))
+ if (sdvo->is_sdvob)
mapping = &(dev_priv->sdvo_mappings[0]);
else
mapping = &(dev_priv->sdvo_mappings[1]);
@@ -1911,7 +1913,7 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
struct sdvo_device_mapping *mapping;
u8 pin;
- if (IS_SDVOB(reg))
+ if (sdvo->is_sdvob)
mapping = &dev_priv->sdvo_mappings[0];
else
mapping = &dev_priv->sdvo_mappings[1];
@@ -1920,12 +1922,12 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
if (mapping->initialized)
pin = mapping->i2c_pin;
- if (pin < GMBUS_NUM_PORTS) {
- sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+ if (intel_gmbus_is_port_valid(pin)) {
+ sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
intel_gmbus_force_bit(sdvo->i2c, true);
} else {
- sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
+ sdvo->i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
}
}
@@ -1936,12 +1938,12 @@ intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device)
}
static u8
-intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
+intel_sdvo_get_slave_addr(struct drm_device *dev, struct intel_sdvo *sdvo)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct sdvo_device_mapping *my_mapping, *other_mapping;
- if (IS_SDVOB(sdvo_reg)) {
+ if (sdvo->is_sdvob) {
my_mapping = &dev_priv->sdvo_mappings[0];
other_mapping = &dev_priv->sdvo_mappings[1];
} else {
@@ -1966,7 +1968,7 @@ intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
/* No SDVO device info is found for another DVO port,
* so use mapping assumption we had before BIOS parsing.
*/
- if (IS_SDVOB(sdvo_reg))
+ if (sdvo->is_sdvob)
return 0x70;
else
return 0x72;
@@ -2191,6 +2193,10 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_CVBS0))
return false;
+ if (flags & SDVO_OUTPUT_YPRPB0)
+ if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_YPRPB0))
+ return false;
+
if (flags & SDVO_OUTPUT_RGB0)
if (!intel_sdvo_analog_init(intel_sdvo, 0))
return false;
@@ -2482,7 +2488,7 @@ intel_sdvo_init_ddc_proxy(struct intel_sdvo *sdvo,
return i2c_add_adapter(&sdvo->ddc) == 0;
}
-bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
+bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
@@ -2494,7 +2500,8 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
return false;
intel_sdvo->sdvo_reg = sdvo_reg;
- intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1;
+ intel_sdvo->is_sdvob = is_sdvob;
+ intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, intel_sdvo) >> 1;
intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo, sdvo_reg);
if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev)) {
kfree(intel_sdvo);
@@ -2511,13 +2518,13 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
u8 byte;
if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) {
- DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n",
- IS_SDVOB(sdvo_reg) ? 'B' : 'C');
+ DRM_DEBUG_KMS("No SDVO device found on %s\n",
+ SDVO_NAME(intel_sdvo));
goto err;
}
}
- if (IS_SDVOB(sdvo_reg))
+ if (intel_sdvo->is_sdvob)
dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
else
dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
@@ -2538,8 +2545,8 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
- DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
- IS_SDVOB(sdvo_reg) ? 'B' : 'C');
+ DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
+ SDVO_NAME(intel_sdvo));
goto err;
}
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 05f765ef5464..ca12c709f3eb 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1153,6 +1153,15 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
DAC_B_0_7_V |
DAC_C_0_7_V);
+
+ /*
+ * The TV sense state should be cleared to zero on cantiga platform. Otherwise
+ * the TV is misdetected. This is hardware requirement.
+ */
+ if (IS_GM45(dev))
+ tv_dac &= ~(TVDAC_STATE_CHG_EN | TVDAC_A_SENSE_CTL |
+ TVDAC_B_SENSE_CTL | TVDAC_C_SENSE_CTL);
+
I915_WRITE(TV_CTL, tv_ctl);
I915_WRITE(TV_DAC, tv_dac);
POSTING_READ(TV_DAC);
OpenPOWER on IntegriCloud