summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_runtime_pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_runtime_pm.c')
-rw-r--r--drivers/gpu/drm/i915/intel_runtime_pm.c1406
1 files changed, 1406 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
new file mode 100644
index 000000000000..f5a78d53e297
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -0,0 +1,1406 @@
+/*
+ * Copyright © 2012-2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Eugeni Dodonov <eugeni.dodonov@intel.com>
+ * Daniel Vetter <daniel.vetter@ffwll.ch>
+ *
+ */
+
+#include <linux/pm_runtime.h>
+#include <linux/vgaarb.h>
+
+#include "i915_drv.h"
+#include "intel_drv.h"
+#include <drm/i915_powerwell.h>
+
+/**
+ * DOC: runtime pm
+ *
+ * The i915 driver supports dynamic enabling and disabling of entire hardware
+ * blocks at runtime. This is especially important on the display side where
+ * software is supposed to control many power gates manually on recent hardware,
+ * since on the GT side a lot of the power management is done by the hardware.
+ * But even there some manual control at the device level is required.
+ *
+ * Since i915 supports a diverse set of platforms with a unified codebase and
+ * hardware engineers just love to shuffle functionality around between power
+ * domains there's a sizeable amount of indirection required. This file provides
+ * generic functions to the driver for grabbing and releasing references for
+ * abstract power domains. It then maps those to the actual power wells
+ * present for a given platform.
+ */
+
+static struct i915_power_domains *hsw_pwr;
+
+#define for_each_power_well(i, power_well, domain_mask, power_domains) \
+ for (i = 0; \
+ i < (power_domains)->power_well_count && \
+ ((power_well) = &(power_domains)->power_wells[i]); \
+ i++) \
+ if ((power_well)->domains & (domain_mask))
+
+#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \
+ for (i = (power_domains)->power_well_count - 1; \
+ i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\
+ i--) \
+ if ((power_well)->domains & (domain_mask))
+
+/*
+ * We should only use the power well if we explicitly asked the hardware to
+ * enable it, so check if it's enabled and also check if we've requested it to
+ * be enabled.
+ */
+static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return I915_READ(HSW_PWR_WELL_DRIVER) ==
+ (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
+}
+
+/**
+ * __intel_display_power_is_enabled - unlocked check for a power domain
+ * @dev_priv: i915 device instance
+ * @domain: power domain to check
+ *
+ * This is the unlocked version of intel_display_power_is_enabled() and should
+ * only be used from error capture and recovery code where deadlocks are
+ * possible.
+ *
+ * Returns:
+ * True when the power domain is enabled, false otherwise.
+ */
+bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+ enum intel_display_power_domain domain)
+{
+ struct i915_power_domains *power_domains;
+ struct i915_power_well *power_well;
+ bool is_enabled;
+ int i;
+
+ if (dev_priv->pm.suspended)
+ return false;
+
+ power_domains = &dev_priv->power_domains;
+
+ is_enabled = true;
+
+ for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+ if (power_well->always_on)
+ continue;
+
+ if (!power_well->hw_enabled) {
+ is_enabled = false;
+ break;
+ }
+ }
+
+ return is_enabled;
+}
+
+/**
+ * intel_display_power_is_enabled - unlocked check for a power domain
+ * @dev_priv: i915 device instance
+ * @domain: power domain to check
+ *
+ * This function can be used to check the hw power domain state. It is mostly
+ * used in hardware state readout functions. Everywhere else code should rely
+ * upon explicit power domain reference counting to ensure that the hardware
+ * block is powered up before accessing it.
+ *
+ * Callers must hold the relevant modesetting locks to ensure that concurrent
+ * threads can't disable the power well while the caller tries to read a few
+ * registers.
+ *
+ * Returns:
+ * True when the power domain is enabled, false otherwise.
+ */
+bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+ enum intel_display_power_domain domain)
+{
+ struct i915_power_domains *power_domains;
+ bool ret;
+
+ power_domains = &dev_priv->power_domains;
+
+ mutex_lock(&power_domains->lock);
+ ret = __intel_display_power_is_enabled(dev_priv, domain);
+ mutex_unlock(&power_domains->lock);
+
+ return ret;
+}
+
+/**
+ * intel_display_set_init_power - set the initial power domain state
+ * @dev_priv: i915 device instance
+ * @enable: whether to enable or disable the initial power domain state
+ *
+ * For simplicity our driver load/unload and system suspend/resume code assumes
+ * that all power domains are always enabled. This functions controls the state
+ * of this little hack. While the initial power domain state is enabled runtime
+ * pm is effectively disabled.
+ */
+void intel_display_set_init_power(struct drm_i915_private *dev_priv,
+ bool enable)
+{
+ if (dev_priv->power_domains.init_power_on == enable)
+ return;
+
+ if (enable)
+ intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+ else
+ intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+ dev_priv->power_domains.init_power_on = enable;
+}
+
+/*
+ * Starting with Haswell, we have a "Power Down Well" that can be turned off
+ * when not needed anymore. We have 4 registers that can request the power well
+ * to be enabled, and it will only be disabled if none of the registers is
+ * requesting it to be enabled.
+ */
+static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ /*
+ * After we re-enable the power well, if we touch VGA register 0x3d5
+ * we'll get unclaimed register interrupts. This stops after we write
+ * anything to the VGA MSR register. The vgacon module uses this
+ * register all the time, so if we unbind our driver and, as a
+ * consequence, bind vgacon, we'll get stuck in an infinite loop at
+ * console_unlock(). So make here we touch the VGA MSR register, making
+ * sure vgacon can keep working normally without triggering interrupts
+ * and error messages.
+ */
+ vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+ outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
+ vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+
+ if (IS_BROADWELL(dev) || (INTEL_INFO(dev)->gen >= 9))
+ gen8_irq_power_well_post_enable(dev_priv);
+}
+
+static void hsw_set_power_well(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well, bool enable)
+{
+ bool is_enabled, enable_requested;
+ uint32_t tmp;
+
+ tmp = I915_READ(HSW_PWR_WELL_DRIVER);
+ is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
+ enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
+
+ if (enable) {
+ if (!enable_requested)
+ I915_WRITE(HSW_PWR_WELL_DRIVER,
+ HSW_PWR_WELL_ENABLE_REQUEST);
+
+ if (!is_enabled) {
+ DRM_DEBUG_KMS("Enabling power well\n");
+ if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
+ HSW_PWR_WELL_STATE_ENABLED), 20))
+ DRM_ERROR("Timeout enabling power well\n");
+ hsw_power_well_post_enable(dev_priv);
+ }
+
+ } else {
+ if (enable_requested) {
+ I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
+ POSTING_READ(HSW_PWR_WELL_DRIVER);
+ DRM_DEBUG_KMS("Requesting to disable the power well\n");
+ }
+ }
+}
+
+static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
+
+ /*
+ * We're taking over the BIOS, so clear any requests made by it since
+ * the driver is in charge now.
+ */
+ if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
+ I915_WRITE(HSW_PWR_WELL_BIOS, 0);
+}
+
+static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ hsw_set_power_well(dev_priv, power_well, true);
+}
+
+static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ hsw_set_power_well(dev_priv, power_well, false);
+}
+
+static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+}
+
+static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return true;
+}
+
+static void vlv_set_power_well(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well, bool enable)
+{
+ enum punit_power_well power_well_id = power_well->data;
+ u32 mask;
+ u32 state;
+ u32 ctrl;
+
+ mask = PUNIT_PWRGT_MASK(power_well_id);
+ state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
+ PUNIT_PWRGT_PWR_GATE(power_well_id);
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+ ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
+
+ if (COND)
+ goto out;
+
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
+ ctrl &= ~mask;
+ ctrl |= state;
+ vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
+
+ if (wait_for(COND, 100))
+ DRM_ERROR("timout setting power well state %08x (%08x)\n",
+ state,
+ vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
+
+#undef COND
+
+out:
+ mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_set_power_well(dev_priv, power_well, true);
+}
+
+static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ int power_well_id = power_well->data;
+ bool enabled = false;
+ u32 mask;
+ u32 state;
+ u32 ctrl;
+
+ mask = PUNIT_PWRGT_MASK(power_well_id);
+ ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+ state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
+ /*
+ * We only ever set the power-on and power-gate states, anything
+ * else is unexpected.
+ */
+ WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
+ state != PUNIT_PWRGT_PWR_GATE(power_well_id));
+ if (state == ctrl)
+ enabled = true;
+
+ /*
+ * A transient state at this point would mean some unexpected party
+ * is poking at the power controls too.
+ */
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
+ WARN_ON(ctrl != state);
+
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ return enabled;
+}
+
+static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ spin_lock_irq(&dev_priv->irq_lock);
+ valleyview_enable_display_irqs(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ /*
+ * During driver initialization/resume we can avoid restoring the
+ * part of the HW/SW state that will be inited anyway explicitly.
+ */
+ if (dev_priv->power_domains.initializing)
+ return;
+
+ intel_hpd_init(dev_priv);
+
+ i915_redisable_vga_power_on(dev_priv->dev);
+}
+
+static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+ spin_lock_irq(&dev_priv->irq_lock);
+ valleyview_disable_display_irqs(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ vlv_set_power_well(dev_priv, power_well, false);
+
+ vlv_power_sequencer_reset(dev_priv);
+}
+
+static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+ /*
+ * Enable the CRI clock source so we can get at the
+ * display and the reference clock for VGA
+ * hotplug / manual detection.
+ */
+ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+ DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+ udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ /*
+ * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+ * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
+ * a. GUnit 0x2110 bit[0] set to 1 (def 0)
+ * b. The other bits such as sfr settings / modesel may all
+ * be set to 0.
+ *
+ * This should only be done on init and resume from S3 with
+ * both PLLs disabled, or we risk losing DPIO and PLL
+ * synchronization.
+ */
+ I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+}
+
+static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum pipe pipe;
+
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+ for_each_pipe(dev_priv, pipe)
+ assert_pll_disabled(dev_priv, pipe);
+
+ /* Assert common reset */
+ I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
+
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum dpio_phy phy;
+
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+ power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+ /*
+ * Enable the CRI clock source so we can get at the
+ * display and the reference clock for VGA
+ * hotplug / manual detection.
+ */
+ if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ phy = DPIO_PHY0;
+ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+ DPLL_REFA_CLK_ENABLE_VLV);
+ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+ DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+ } else {
+ phy = DPIO_PHY1;
+ I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
+ DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+ }
+ udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ /* Poll for phypwrgood signal */
+ if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
+ DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+ I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) |
+ PHY_COM_LANE_RESET_DEASSERT(phy));
+}
+
+static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum dpio_phy phy;
+
+ WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+ power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+ if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+ phy = DPIO_PHY0;
+ assert_pll_disabled(dev_priv, PIPE_A);
+ assert_pll_disabled(dev_priv, PIPE_B);
+ } else {
+ phy = DPIO_PHY1;
+ assert_pll_disabled(dev_priv, PIPE_C);
+ }
+
+ I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) &
+ ~PHY_COM_LANE_RESET_DEASSERT(phy));
+
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum pipe pipe = power_well->data;
+ bool enabled;
+ u32 state, ctrl;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+ state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
+ /*
+ * We only ever set the power-on and power-gate states, anything
+ * else is unexpected.
+ */
+ WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
+ enabled = state == DP_SSS_PWR_ON(pipe);
+
+ /*
+ * A transient state at this point would mean some unexpected party
+ * is poking at the power controls too.
+ */
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
+ WARN_ON(ctrl << 16 != state);
+
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ return enabled;
+}
+
+static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well,
+ bool enable)
+{
+ enum pipe pipe = power_well->data;
+ u32 state;
+ u32 ctrl;
+
+ state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+ ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
+
+ if (COND)
+ goto out;
+
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+ ctrl &= ~DP_SSC_MASK(pipe);
+ ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
+ vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
+
+ if (wait_for(COND, 100))
+ DRM_ERROR("timout setting power well state %08x (%08x)\n",
+ state,
+ vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
+
+#undef COND
+
+out:
+ mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN_ON_ONCE(power_well->data != PIPE_A &&
+ power_well->data != PIPE_B &&
+ power_well->data != PIPE_C);
+
+ chv_set_pipe_power_well(dev_priv, power_well, true);
+
+ if (power_well->data == PIPE_A) {
+ spin_lock_irq(&dev_priv->irq_lock);
+ valleyview_enable_display_irqs(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ /*
+ * During driver initialization/resume we can avoid restoring the
+ * part of the HW/SW state that will be inited anyway explicitly.
+ */
+ if (dev_priv->power_domains.initializing)
+ return;
+
+ intel_hpd_init(dev_priv);
+
+ i915_redisable_vga_power_on(dev_priv->dev);
+ }
+}
+
+static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ WARN_ON_ONCE(power_well->data != PIPE_A &&
+ power_well->data != PIPE_B &&
+ power_well->data != PIPE_C);
+
+ if (power_well->data == PIPE_A) {
+ spin_lock_irq(&dev_priv->irq_lock);
+ valleyview_disable_display_irqs(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+ }
+
+ chv_set_pipe_power_well(dev_priv, power_well, false);
+
+ if (power_well->data == PIPE_A)
+ vlv_power_sequencer_reset(dev_priv);
+}
+
+static void check_power_well_state(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ bool enabled = power_well->ops->is_enabled(dev_priv, power_well);
+
+ if (power_well->always_on || !i915.disable_power_well) {
+ if (!enabled)
+ goto mismatch;
+
+ return;
+ }
+
+ if (enabled != (power_well->count > 0))
+ goto mismatch;
+
+ return;
+
+mismatch:
+ WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
+ power_well->name, power_well->always_on, enabled,
+ power_well->count, i915.disable_power_well);
+}
+
+/**
+ * intel_display_power_get - grab a power domain reference
+ * @dev_priv: i915 device instance
+ * @domain: power domain to reference
+ *
+ * This function grabs a power domain reference for @domain and ensures that the
+ * power domain and all its parents are powered up. Therefore users should only
+ * grab a reference to the innermost power domain they need.
+ *
+ * Any power domain reference obtained by this function must have a symmetric
+ * call to intel_display_power_put() to release the reference again.
+ */
+void intel_display_power_get(struct drm_i915_private *dev_priv,
+ enum intel_display_power_domain domain)
+{
+ struct i915_power_domains *power_domains;
+ struct i915_power_well *power_well;
+ int i;
+
+ intel_runtime_pm_get(dev_priv);
+
+ power_domains = &dev_priv->power_domains;
+
+ mutex_lock(&power_domains->lock);
+
+ for_each_power_well(i, power_well, BIT(domain), power_domains) {
+ if (!power_well->count++) {
+ DRM_DEBUG_KMS("enabling %s\n", power_well->name);
+ power_well->ops->enable(dev_priv, power_well);
+ power_well->hw_enabled = true;
+ }
+
+ check_power_well_state(dev_priv, power_well);
+ }
+
+ power_domains->domain_use_count[domain]++;
+
+ mutex_unlock(&power_domains->lock);
+}
+
+/**
+ * intel_display_power_put - release a power domain reference
+ * @dev_priv: i915 device instance
+ * @domain: power domain to reference
+ *
+ * This function drops the power domain reference obtained by
+ * intel_display_power_get() and might power down the corresponding hardware
+ * block right away if this is the last reference.
+ */
+void intel_display_power_put(struct drm_i915_private *dev_priv,
+ enum intel_display_power_domain domain)
+{
+ struct i915_power_domains *power_domains;
+ struct i915_power_well *power_well;
+ int i;
+
+ power_domains = &dev_priv->power_domains;
+
+ mutex_lock(&power_domains->lock);
+
+ WARN_ON(!power_domains->domain_use_count[domain]);
+ power_domains->domain_use_count[domain]--;
+
+ for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+ WARN_ON(!power_well->count);
+
+ if (!--power_well->count && i915.disable_power_well) {
+ DRM_DEBUG_KMS("disabling %s\n", power_well->name);
+ power_well->hw_enabled = false;
+ power_well->ops->disable(dev_priv, power_well);
+ }
+
+ check_power_well_state(dev_priv, power_well);
+ }
+
+ mutex_unlock(&power_domains->lock);
+
+ intel_runtime_pm_put(dev_priv);
+}
+
+#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
+
+#define HSW_ALWAYS_ON_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
+ BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_CRT) | \
+ BIT(POWER_DOMAIN_PLLS) | \
+ BIT(POWER_DOMAIN_INIT))
+#define HSW_DISPLAY_POWER_DOMAINS ( \
+ (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define BDW_ALWAYS_ON_POWER_DOMAINS ( \
+ HSW_ALWAYS_ON_POWER_DOMAINS | \
+ BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
+#define BDW_DISPLAY_POWER_DOMAINS ( \
+ (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT)
+#define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK
+
+#define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_CRT) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_A_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_A) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_B_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_B) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_C_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PIPE_C) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_D_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) | \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS ( \
+ BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) | \
+ BIT(POWER_DOMAIN_INIT))
+
+static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
+ .sync_hw = i9xx_always_on_power_well_noop,
+ .enable = i9xx_always_on_power_well_noop,
+ .disable = i9xx_always_on_power_well_noop,
+ .is_enabled = i9xx_always_on_power_well_enabled,
+};
+
+static const struct i915_power_well_ops chv_pipe_power_well_ops = {
+ .sync_hw = chv_pipe_power_well_sync_hw,
+ .enable = chv_pipe_power_well_enable,
+ .disable = chv_pipe_power_well_disable,
+ .is_enabled = chv_pipe_power_well_enabled,
+};
+
+static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
+ .sync_hw = vlv_power_well_sync_hw,
+ .enable = chv_dpio_cmn_power_well_enable,
+ .disable = chv_dpio_cmn_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well i9xx_always_on_power_well[] = {
+ {
+ .name = "always-on",
+ .always_on = 1,
+ .domains = POWER_DOMAIN_MASK,
+ .ops = &i9xx_always_on_power_well_ops,
+ },
+};
+
+static const struct i915_power_well_ops hsw_power_well_ops = {
+ .sync_hw = hsw_power_well_sync_hw,
+ .enable = hsw_power_well_enable,
+ .disable = hsw_power_well_disable,
+ .is_enabled = hsw_power_well_enabled,
+};
+
+static struct i915_power_well hsw_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = 1,
+ .domains = HSW_ALWAYS_ON_POWER_DOMAINS,
+ .ops = &i9xx_always_on_power_well_ops,
+ },
+ {
+ .name = "display",
+ .domains = HSW_DISPLAY_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ },
+};
+
+static struct i915_power_well bdw_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = 1,
+ .domains = BDW_ALWAYS_ON_POWER_DOMAINS,
+ .ops = &i9xx_always_on_power_well_ops,
+ },
+ {
+ .name = "display",
+ .domains = BDW_DISPLAY_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ },
+};
+
+static const struct i915_power_well_ops vlv_display_power_well_ops = {
+ .sync_hw = vlv_power_well_sync_hw,
+ .enable = vlv_display_power_well_enable,
+ .disable = vlv_display_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
+ .sync_hw = vlv_power_well_sync_hw,
+ .enable = vlv_dpio_cmn_power_well_enable,
+ .disable = vlv_dpio_cmn_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
+ .sync_hw = vlv_power_well_sync_hw,
+ .enable = vlv_power_well_enable,
+ .disable = vlv_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well vlv_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = 1,
+ .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+ .ops = &i9xx_always_on_power_well_ops,
+ },
+ {
+ .name = "display",
+ .domains = VLV_DISPLAY_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DISP2D,
+ .ops = &vlv_display_power_well_ops,
+ },
+ {
+ .name = "dpio-tx-b-01",
+ .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+ },
+ {
+ .name = "dpio-tx-b-23",
+ .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+ },
+ {
+ .name = "dpio-tx-c-01",
+ .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+ },
+ {
+ .name = "dpio-tx-c-23",
+ .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+ },
+ {
+ .name = "dpio-common",
+ .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+ .ops = &vlv_dpio_cmn_power_well_ops,
+ },
+};
+
+static struct i915_power_well chv_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = 1,
+ .domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+ .ops = &i9xx_always_on_power_well_ops,
+ },
+#if 0
+ {
+ .name = "display",
+ .domains = VLV_DISPLAY_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DISP2D,
+ .ops = &vlv_display_power_well_ops,
+ },
+#endif
+ {
+ .name = "pipe-a",
+ /*
+ * FIXME: pipe A power well seems to be the new disp2d well.
+ * At least all registers seem to be housed there. Figure
+ * out if this a a temporary situation in pre-production
+ * hardware or a permanent state of affairs.
+ */
+ .domains = CHV_PIPE_A_POWER_DOMAINS | VLV_DISPLAY_POWER_DOMAINS,
+ .data = PIPE_A,
+ .ops = &chv_pipe_power_well_ops,
+ },
+#if 0
+ {
+ .name = "pipe-b",
+ .domains = CHV_PIPE_B_POWER_DOMAINS,
+ .data = PIPE_B,
+ .ops = &chv_pipe_power_well_ops,
+ },
+ {
+ .name = "pipe-c",
+ .domains = CHV_PIPE_C_POWER_DOMAINS,
+ .data = PIPE_C,
+ .ops = &chv_pipe_power_well_ops,
+ },
+#endif
+ {
+ .name = "dpio-common-bc",
+ /*
+ * XXX: cmnreset for one PHY seems to disturb the other.
+ * As a workaround keep both powered on at the same
+ * time for now.
+ */
+ .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+ .ops = &chv_dpio_cmn_power_well_ops,
+ },
+ {
+ .name = "dpio-common-d",
+ /*
+ * XXX: cmnreset for one PHY seems to disturb the other.
+ * As a workaround keep both powered on at the same
+ * time for now.
+ */
+ .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
+ .data = PUNIT_POWER_WELL_DPIO_CMN_D,
+ .ops = &chv_dpio_cmn_power_well_ops,
+ },
+#if 0
+ {
+ .name = "dpio-tx-b-01",
+ .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+ },
+ {
+ .name = "dpio-tx-b-23",
+ .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+ },
+ {
+ .name = "dpio-tx-c-01",
+ .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+ },
+ {
+ .name = "dpio-tx-c-23",
+ .domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+ VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+ },
+ {
+ .name = "dpio-tx-d-01",
+ .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+ CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01,
+ },
+ {
+ .name = "dpio-tx-d-23",
+ .domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+ CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+ .ops = &vlv_dpio_power_well_ops,
+ .data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23,
+ },
+#endif
+};
+
+static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
+ enum punit_power_well power_well_id)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *power_well;
+ int i;
+
+ for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+ if (power_well->data == power_well_id)
+ return power_well;
+ }
+
+ return NULL;
+}
+
+#define set_power_wells(power_domains, __power_wells) ({ \
+ (power_domains)->power_wells = (__power_wells); \
+ (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \
+})
+
+/**
+ * intel_power_domains_init - initializes the power domain structures
+ * @dev_priv: i915 device instance
+ *
+ * Initializes the power domain structures for @dev_priv depending upon the
+ * supported platform.
+ */
+int intel_power_domains_init(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+
+ mutex_init(&power_domains->lock);
+
+ /*
+ * The enabling order will be from lower to higher indexed wells,
+ * the disabling order is reversed.
+ */
+ if (IS_HASWELL(dev_priv->dev)) {
+ set_power_wells(power_domains, hsw_power_wells);
+ hsw_pwr = power_domains;
+ } else if (IS_BROADWELL(dev_priv->dev)) {
+ set_power_wells(power_domains, bdw_power_wells);
+ hsw_pwr = power_domains;
+ } else if (IS_CHERRYVIEW(dev_priv->dev)) {
+ set_power_wells(power_domains, chv_power_wells);
+ } else if (IS_VALLEYVIEW(dev_priv->dev)) {
+ set_power_wells(power_domains, vlv_power_wells);
+ } else {
+ set_power_wells(power_domains, i9xx_always_on_power_well);
+ }
+
+ return 0;
+}
+
+static void intel_runtime_pm_disable(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct device *device = &dev->pdev->dev;
+
+ if (!HAS_RUNTIME_PM(dev))
+ return;
+
+ if (!intel_enable_rc6(dev))
+ return;
+
+ /* Make sure we're not suspended first. */
+ pm_runtime_get_sync(device);
+ pm_runtime_disable(device);
+}
+
+/**
+ * intel_power_domains_fini - finalizes the power domain structures
+ * @dev_priv: i915 device instance
+ *
+ * Finalizes the power domain structures for @dev_priv depending upon the
+ * supported platform. This function also disables runtime pm and ensures that
+ * the device stays powered up so that the driver can be reloaded.
+ */
+void intel_power_domains_fini(struct drm_i915_private *dev_priv)
+{
+ intel_runtime_pm_disable(dev_priv);
+
+ /* The i915.ko module is still not prepared to be loaded when
+ * the power well is not enabled, so just enable it in case
+ * we're going to unload/reload. */
+ intel_display_set_init_power(dev_priv, true);
+
+ hsw_pwr = NULL;
+}
+
+static void intel_power_domains_resume(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *power_well;
+ int i;
+
+ mutex_lock(&power_domains->lock);
+ for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+ power_well->ops->sync_hw(dev_priv, power_well);
+ power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
+ power_well);
+ }
+ mutex_unlock(&power_domains->lock);
+}
+
+static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_well *cmn =
+ lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
+ struct i915_power_well *disp2d =
+ lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
+
+ /* If the display might be already active skip this */
+ if (cmn->ops->is_enabled(dev_priv, cmn) &&
+ disp2d->ops->is_enabled(dev_priv, disp2d) &&
+ I915_READ(DPIO_CTL) & DPIO_CMNRST)
+ return;
+
+ DRM_DEBUG_KMS("toggling display PHY side reset\n");
+
+ /* cmnlane needs DPLL registers */
+ disp2d->ops->enable(dev_priv, disp2d);
+
+ /*
+ * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
+ * Need to assert and de-assert PHY SB reset by gating the
+ * common lane power, then un-gating it.
+ * Simply ungating isn't enough to reset the PHY enough to get
+ * ports and lanes running.
+ */
+ cmn->ops->disable(dev_priv, cmn);
+}
+
+/**
+ * intel_power_domains_init_hw - initialize hardware power domain state
+ * @dev_priv: i915 device instance
+ *
+ * This function initializes the hardware power domain state and enables all
+ * power domains using intel_display_set_init_power().
+ */
+void intel_power_domains_init_hw(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+
+ power_domains->initializing = true;
+
+ if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
+ mutex_lock(&power_domains->lock);
+ vlv_cmnlane_wa(dev_priv);
+ mutex_unlock(&power_domains->lock);
+ }
+
+ /* For now, we need the power well to be always enabled. */
+ intel_display_set_init_power(dev_priv, true);
+ intel_power_domains_resume(dev_priv);
+ power_domains->initializing = false;
+}
+
+/**
+ * intel_aux_display_runtime_get - grab an auxilliary power domain reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a power domain reference for the auxiliary power domain
+ * (for access to the GMBUS and DP AUX blocks) and ensures that it and all its
+ * parents are powered up. Therefore users should only grab a reference to the
+ * innermost power domain they need.
+ *
+ * Any power domain reference obtained by this function must have a symmetric
+ * call to intel_aux_display_runtime_put() to release the reference again.
+ */
+void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv)
+{
+ intel_runtime_pm_get(dev_priv);
+}
+
+/**
+ * intel_aux_display_runtime_put - release an auxilliary power domain reference
+ * @dev_priv: i915 device instance
+ *
+ * This function drops the auxilliary power domain reference obtained by
+ * intel_aux_display_runtime_get() and might power down the corresponding
+ * hardware block right away if this is the last reference.
+ */
+void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv)
+{
+ intel_runtime_pm_put(dev_priv);
+}
+
+/**
+ * intel_runtime_pm_get - grab a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a device-level runtime pm reference (mostly used for GEM
+ * code to ensure the GTT or GT is on) and ensures that it is powered up.
+ *
+ * Any runtime pm reference obtained by this function must have a symmetric
+ * call to intel_runtime_pm_put() to release the reference again.
+ */
+void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct device *device = &dev->pdev->dev;
+
+ if (!HAS_RUNTIME_PM(dev))
+ return;
+
+ pm_runtime_get_sync(device);
+ WARN(dev_priv->pm.suspended, "Device still suspended.\n");
+}
+
+/**
+ * intel_runtime_pm_get_noresume - grab a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a device-level runtime pm reference (mostly used for GEM
+ * code to ensure the GTT or GT is on).
+ *
+ * It will _not_ power up the device but instead only check that it's powered
+ * on. Therefore it is only valid to call this functions from contexts where
+ * the device is known to be powered up and where trying to power it up would
+ * result in hilarity and deadlocks. That pretty much means only the system
+ * suspend/resume code where this is used to grab runtime pm references for
+ * delayed setup down in work items.
+ *
+ * Any runtime pm reference obtained by this function must have a symmetric
+ * call to intel_runtime_pm_put() to release the reference again.
+ */
+void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct device *device = &dev->pdev->dev;
+
+ if (!HAS_RUNTIME_PM(dev))
+ return;
+
+ WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n");
+ pm_runtime_get_noresume(device);
+}
+
+/**
+ * intel_runtime_pm_put - release a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function drops the device-level runtime pm reference obtained by
+ * intel_runtime_pm_get() and might power down the corresponding
+ * hardware block right away if this is the last reference.
+ */
+void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct device *device = &dev->pdev->dev;
+
+ if (!HAS_RUNTIME_PM(dev))
+ return;
+
+ pm_runtime_mark_last_busy(device);
+ pm_runtime_put_autosuspend(device);
+}
+
+/**
+ * intel_runtime_pm_enable - enable runtime pm
+ * @dev_priv: i915 device instance
+ *
+ * This function enables runtime pm at the end of the driver load sequence.
+ *
+ * Note that this function does currently not enable runtime pm for the
+ * subordinate display power domains. That is only done on the first modeset
+ * using intel_display_set_init_power().
+ */
+void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct device *device = &dev->pdev->dev;
+
+ if (!HAS_RUNTIME_PM(dev))
+ return;
+
+ pm_runtime_set_active(device);
+
+ /*
+ * RPM depends on RC6 to save restore the GT HW context, so make RC6 a
+ * requirement.
+ */
+ if (!intel_enable_rc6(dev)) {
+ DRM_INFO("RC6 disabled, disabling runtime PM support\n");
+ return;
+ }
+
+ pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
+ pm_runtime_mark_last_busy(device);
+ pm_runtime_use_autosuspend(device);
+
+ pm_runtime_put_autosuspend(device);
+}
+
+/* Display audio driver power well request */
+int i915_request_power_well(void)
+{
+ struct drm_i915_private *dev_priv;
+
+ if (!hsw_pwr)
+ return -ENODEV;
+
+ dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+ power_domains);
+ intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(i915_request_power_well);
+
+/* Display audio driver power well release */
+int i915_release_power_well(void)
+{
+ struct drm_i915_private *dev_priv;
+
+ if (!hsw_pwr)
+ return -ENODEV;
+
+ dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+ power_domains);
+ intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(i915_release_power_well);
+
+/*
+ * Private interface for the audio driver to get CDCLK in kHz.
+ *
+ * Caller must request power well using i915_request_power_well() prior to
+ * making the call.
+ */
+int i915_get_cdclk_freq(void)
+{
+ struct drm_i915_private *dev_priv;
+
+ if (!hsw_pwr)
+ return -ENODEV;
+
+ dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+ power_domains);
+
+ return intel_ddi_get_cdclk_freq(dev_priv);
+}
+EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);
OpenPOWER on IntegriCloud