diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 193 |
1 files changed, 170 insertions, 23 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 93ff6c03733e..3ba6546b7c7f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -943,6 +943,7 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } @@ -1260,9 +1261,11 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - /* Pre-i965 needs to install a fence for tiled scan-out */ - if (!IS_I965G(dev) && - obj_priv->fence_reg == I915_FENCE_REG_NONE && + /* Install a fence for tiled scan-out. Pre-i965 always needs a fence, + * whereas 965+ only requires a fence if using framebuffer compression. + * For simplicity, we always install a fence as the cost is not that onerous. + */ + if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj); if (ret != 0) { @@ -1513,7 +1516,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) /* Enable panel fitting for LVDS */ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(pf_ctl_reg); - I915_WRITE(pf_ctl_reg, temp | PF_ENABLE); + I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3); /* currently full aspect */ I915_WRITE(pf_win_pos, 0); @@ -1801,6 +1804,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: + intel_update_watermarks(dev); + /* Enable the DPLL */ temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { @@ -1838,7 +1843,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO - intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: intel_update_watermarks(dev); @@ -2082,7 +2086,7 @@ fdi_reduce_ratio(u32 *num, u32 *den) #define LINK_N 0x80000 static void -igdng_compute_m_n(int bytes_per_pixel, int nlanes, +igdng_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { @@ -2092,7 +2096,8 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes); + m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); + m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); @@ -2140,6 +2145,13 @@ static struct intel_watermark_params igd_cursor_hplloff_wm = { IGD_CURSOR_GUARD_WM, IGD_FIFO_LINE_SIZE }; +static struct intel_watermark_params g4x_wm_info = { + G4X_FIFO_SIZE, + G4X_MAX_WM, + G4X_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; static struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, @@ -2430,17 +2442,74 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) return size; } -static void g4x_update_wm(struct drm_device *dev, int unused, int unused2, - int unused3, int unused4) +static void g4x_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 fw_blc_self = I915_READ(FW_BLC_SELF); + int total_size, cacheline_size; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr; + struct intel_watermark_params planea_params, planeb_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0, entries_required; - if (i915_powersave) - fw_blc_self |= FW_BLC_SELF_EN; - else - fw_blc_self &= ~FW_BLC_SELF_EN; - I915_WRITE(FW_BLC_SELF, fw_blc_self); + /* Create copies of the base settings for each pipe */ + planea_params = planeb_params = g4x_wm_info; + + /* Grab a couple of global values before we overwrite them */ + total_size = planea_params.fifo_size; + cacheline_size = planea_params.cacheline_size; + + /* + * Note: we need to make sure we don't overflow for various clock & + * latency values. + * clocks go from a few thousand to several hundred thousand. + * latency is usually a few thousand + */ + entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planea_wm = entries_required + planea_params.guard_size; + + entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planeb_wm = entries_required + planeb_params.guard_size; + + cursora_wm = cursorb_wm = 16; + cursor_sr = 32; + + DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); + + /* Calc sr entries for one plane configs */ + if (sr_hdisplay && (!planea_clock || !planeb_clock)) { + /* self-refresh has much higher latency */ + const static int sr_latency_ns = 12000; + + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = ((sr_hdisplay * 1000) / sr_clock); + + /* Use ns/us then divide to preserve precision */ + sr_entries = (((sr_latency_ns / line_time_us) + 1) * + pixel_size * sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / cacheline_size, 1); + DRM_DEBUG("self-refresh entries: %d\n", sr_entries); + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", + planea_wm, planeb_wm, sr_entries); + + planea_wm &= 0x3f; + planeb_wm &= 0x3f; + + I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); + I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + /* HPLL off in SR has some issues on G4x... disable it */ + I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | + (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i965_update_wm(struct drm_device *dev, int unused, int unused2, @@ -2586,6 +2655,9 @@ static void intel_update_watermarks(struct drm_device *dev) unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; int enabled = 0, pixel_size = 0; + if (!dev_priv->display.update_wm) + return; + /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); @@ -2763,7 +2835,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (IS_IGDNG(dev)) { - int lane, link_bw; + int lane, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (is_edp) { @@ -2782,10 +2854,72 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lane = 4; link_bw = 270000; } - igdng_compute_m_n(3, lane, target_clock, + + /* determine panel color depth */ + temp = I915_READ(pipeconf_reg); + + switch (temp & PIPE_BPC_MASK) { + case PIPE_8BPC: + bpp = 24; + break; + case PIPE_10BPC: + bpp = 30; + break; + case PIPE_6BPC: + bpp = 18; + break; + case PIPE_12BPC: + bpp = 36; + break; + default: + DRM_ERROR("unknown pipe bpc value\n"); + bpp = 24; + } + + igdng_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } + /* Ironlake: try to setup display ref clock before DPLL + * enabling. This is only under driver's control after + * PCH B stepping, previous chipset stepping should be + * ignoring this setting. + */ + if (IS_IGDNG(dev)) { + temp = I915_READ(PCH_DREF_CONTROL); + /* Always enable nonspread source */ + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + if (is_edp) { + if (dev_priv->lvds_use_ssc) { + temp |= DREF_SSC1_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } else { + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } + } + } + if (IS_IGD(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) @@ -2936,6 +3070,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lvds = I915_READ(lvds_reg); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* set the corresponsding LVDS_BORDER bit */ + lvds |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ @@ -3095,7 +3231,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, struct drm_gem_object *bo; struct drm_i915_gem_object *obj_priv; int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; uint32_t temp = I915_READ(control); @@ -3182,9 +3317,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, drm_gem_object_unreference(intel_crtc->cursor_bo); } - if ((IS_I965G(dev) || plane == 0)) - intel_update_fbc(crtc, &crtc->mode); - mutex_unlock(&dev->struct_mutex); intel_crtc->cursor_addr = addr; @@ -3244,6 +3376,16 @@ void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, intel_crtc->lut_b[regno] = blue >> 8; } +void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, int regno) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + *red = intel_crtc->lut_r[regno] << 8; + *green = intel_crtc->lut_g[regno] << 8; + *blue = intel_crtc->lut_b[regno] << 8; +} + static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t size) { @@ -3835,6 +3977,7 @@ static const struct drm_crtc_helper_funcs intel_helper_funcs = { .mode_set_base = intel_pipe_set_base, .prepare = intel_crtc_prepare, .commit = intel_crtc_commit, + .load_lut = intel_crtc_load_lut, }; static const struct drm_crtc_funcs intel_crtc_funcs = { @@ -4117,7 +4260,9 @@ void intel_init_clock_gating(struct drm_device *dev) * Disable clock gating reported to work incorrectly according to the * specs, but enable as much else as we can. */ - if (IS_G4X(dev)) { + if (IS_IGDNG(dev)) { + return; + } else if (IS_G4X(dev)) { uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | @@ -4205,7 +4350,9 @@ static void intel_init_display(struct drm_device *dev) i830_get_display_clock_speed; /* For FIFO watermark updates */ - if (IS_G4X(dev)) + if (IS_IGDNG(dev)) + dev_priv->display.update_wm = NULL; + else if (IS_G4X(dev)) dev_priv->display.update_wm = g4x_update_wm; else if (IS_I965G(dev)) dev_priv->display.update_wm = i965_update_wm; |
