1 files changed, 867 insertions, 196 deletions

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index bfe375466a0e..58f50ebdbef6 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -58,6 +58,26 @@ static const u32 hsw_ddi_translations_fdi[] = {
 	0x00FFFFFF, 0x00040006		/* HDMI parameters */
 };
 
+static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	int type = intel_encoder->type;
+
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP ||
+	    type == INTEL_OUTPUT_HDMI || type == INTEL_OUTPUT_UNKNOWN) {
+		struct intel_digital_port *intel_dig_port =
+			enc_to_dig_port(encoder);
+		return intel_dig_port->port;
+
+	} else if (type == INTEL_OUTPUT_ANALOG) {
+		return PORT_E;
+
+	} else {
+		DRM_ERROR("Invalid DDI encoder type %d\n", type);
+		BUG();
+	}
+}
+
 /* On Haswell, DDI port buffers must be programmed with correct values
  * in advance. The buffer values are different for FDI and DP modes,
  * but the HDMI/DVI fields are shared among those. So we program the DDI
@@ -133,25 +153,34 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 reg, temp, i;
-
-	/* Configure CPU PLL, wait for warmup */
-	I915_WRITE(SPLL_CTL,
-			SPLL_PLL_ENABLE |
-			SPLL_PLL_FREQ_1350MHz |
-			SPLL_PLL_SCC);
+	u32 temp, i, rx_ctl_val;
 
-	/* Use SPLL to drive the output when in FDI mode */
-	I915_WRITE(PORT_CLK_SEL(PORT_E),
-			PORT_CLK_SEL_SPLL);
-	I915_WRITE(PIPE_CLK_SEL(pipe),
-			PIPE_CLK_SEL_PORT(PORT_E));
-
-	udelay(20);
-
-	/* Start the training iterating through available voltages and emphasis */
-	for (i=0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) {
+	/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
+	 * mode set "sequence for CRT port" document:
+	 * - TP1 to TP2 time with the default value
+	 * - FDI delay to 90h
+	 */
+	I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
+				  FDI_RX_PWRDN_LANE0_VAL(2) |
+				  FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+	/* Enable the PCH Receiver FDI PLL */
+	rx_ctl_val = FDI_RX_PLL_ENABLE | FDI_RX_ENHANCE_FRAME_ENABLE |
+		     ((intel_crtc->fdi_lanes - 1) << 19);
+	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+	POSTING_READ(_FDI_RXA_CTL);
+	udelay(220);
+
+	/* Switch from Rawclk to PCDclk */
+	rx_ctl_val |= FDI_PCDCLK;
+	I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+
+	/* Configure Port Clock Select */
+	I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
+
+	/* Start the training iterating through available voltages and emphasis,
+	 * testing each value twice. */
+	for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
 		/* Configure DP_TP_CTL with auto-training */
 		I915_WRITE(DP_TP_CTL(PORT_E),
 					DP_TP_CTL_FDI_AUTOTRAIN |
@@ -160,103 +189,63 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
 					DP_TP_CTL_ENABLE);
 
 		/* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
-		temp = I915_READ(DDI_BUF_CTL(PORT_E));
-		temp = (temp & ~DDI_BUF_EMP_MASK);
 		I915_WRITE(DDI_BUF_CTL(PORT_E),
-				temp |
-				DDI_BUF_CTL_ENABLE |
-				DDI_PORT_WIDTH_X2 |
-				hsw_ddi_buf_ctl_values[i]);
+			   DDI_BUF_CTL_ENABLE |
+			   ((intel_crtc->fdi_lanes - 1) << 1) |
+			   hsw_ddi_buf_ctl_values[i / 2]);
+		POSTING_READ(DDI_BUF_CTL(PORT_E));
 
 		udelay(600);
 
-		/* We need to program FDI_RX_MISC with the default TP1 to TP2
-		 * values before enabling the receiver, and configure the delay
-		 * for the FDI timing generator to 90h. Luckily, all the other
-		 * bits are supposed to be zeroed, so we can write those values
-		 * directly.
-		 */
-		I915_WRITE(FDI_RX_MISC(pipe), FDI_RX_TP1_TO_TP2_48 |
-				FDI_RX_FDI_DELAY_90);
-
-		/* Enable CPU FDI Receiver with auto-training */
-		reg = FDI_RX_CTL(pipe);
-		I915_WRITE(reg,
-				I915_READ(reg) |
-					FDI_LINK_TRAIN_AUTO |
-					FDI_RX_ENABLE |
-					FDI_LINK_TRAIN_PATTERN_1_CPT |
-					FDI_RX_ENHANCE_FRAME_ENABLE |
-					FDI_PORT_WIDTH_2X_LPT |
-					FDI_RX_PLL_ENABLE);
-		POSTING_READ(reg);
-		udelay(100);
+		/* Program PCH FDI Receiver TU */
+		I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
+
+		/* Enable PCH FDI Receiver with auto-training */
+		rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
+		I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+		POSTING_READ(_FDI_RXA_CTL);
+
+		/* Wait for FDI receiver lane calibration */
+		udelay(30);
+
+		/* Unset FDI_RX_MISC pwrdn lanes */
+		temp = I915_READ(_FDI_RXA_MISC);
+		temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+		I915_WRITE(_FDI_RXA_MISC, temp);
+		POSTING_READ(_FDI_RXA_MISC);
+
+		/* Wait for FDI auto training time */
+		udelay(5);
 
 		temp = I915_READ(DP_TP_STATUS(PORT_E));
 		if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
-			DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n", i);
+			DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
 
 			/* Enable normal pixel sending for FDI */
 			I915_WRITE(DP_TP_CTL(PORT_E),
-						DP_TP_CTL_FDI_AUTOTRAIN |
-						DP_TP_CTL_LINK_TRAIN_NORMAL |
-						DP_TP_CTL_ENHANCED_FRAME_ENABLE |
-						DP_TP_CTL_ENABLE);
-
-			/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
-			temp = I915_READ(DDI_FUNC_CTL(pipe));
-			temp &= ~PIPE_DDI_PORT_MASK;
-			temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
-					PIPE_DDI_MODE_SELECT_FDI |
-					PIPE_DDI_FUNC_ENABLE |
-					PIPE_DDI_PORT_WIDTH_X2;
-			I915_WRITE(DDI_FUNC_CTL(pipe),
-					temp);
-			break;
-		} else {
-			DRM_ERROR("Error training BUF_CTL %d\n", i);
+				   DP_TP_CTL_FDI_AUTOTRAIN |
+				   DP_TP_CTL_LINK_TRAIN_NORMAL |
+				   DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+				   DP_TP_CTL_ENABLE);
 
-			/* Disable DP_TP_CTL and FDI_RX_CTL) and retry */
-			I915_WRITE(DP_TP_CTL(PORT_E),
-					I915_READ(DP_TP_CTL(PORT_E)) &
-						~DP_TP_CTL_ENABLE);
-			I915_WRITE(FDI_RX_CTL(pipe),
-					I915_READ(FDI_RX_CTL(pipe)) &
-						~FDI_RX_PLL_ENABLE);
-			continue;
+			return;
 		}
-	}
 
-	DRM_DEBUG_KMS("FDI train done.\n");
-}
+		/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
+		I915_WRITE(DP_TP_CTL(PORT_E),
+			   I915_READ(DP_TP_CTL(PORT_E)) & ~DP_TP_CTL_ENABLE);
 
-/* For DDI connections, it is possible to support different outputs over the
- * same DDI port, such as HDMI or DP or even VGA via FDI. So we don't know by
- * the time the output is detected what exactly is on the other end of it. This
- * function aims at providing support for this detection and proper output
- * configuration.
- */
-void intel_ddi_init(struct drm_device *dev, enum port port)
-{
-	/* For now, we don't do any proper output detection and assume that we
-	 * handle HDMI only */
+		rx_ctl_val &= ~FDI_RX_ENABLE;
+		I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
 
-	switch(port){
-	case PORT_A:
-		/* We don't handle eDP and DP yet */
-		DRM_DEBUG_DRIVER("Found digital output on DDI port A\n");
-		break;
-	/* Assume that the  ports B, C and D are working in HDMI mode for now */
-	case PORT_B:
-	case PORT_C:
-	case PORT_D:
-		intel_hdmi_init(dev, DDI_BUF_CTL(port), port);
-		break;
-	default:
-		DRM_DEBUG_DRIVER("No handlers defined for port %d, skipping DDI initialization\n",
-				port);
-		break;
+		/* Reset FDI_RX_MISC pwrdn lanes */
+		temp = I915_READ(_FDI_RXA_MISC);
+		temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+		temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
+		I915_WRITE(_FDI_RXA_MISC, temp);
 	}
+
+	DRM_ERROR("FDI link training failed!\n");
 }
 
 /* WRPLL clock dividers */
@@ -645,116 +634,426 @@ static const struct wrpll_tmds_clock wrpll_tmds_clock_table[] = {
 	{298000,	2,	21,	19},
 };
 
-void intel_ddi_mode_set(struct drm_encoder *encoder,
-				struct drm_display_mode *mode,
-				struct drm_display_mode *adjusted_mode)
+static void intel_ddi_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = encoder->crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
-	int port = intel_hdmi->ddi_port;
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	int port = intel_ddi_get_encoder_port(intel_encoder);
 	int pipe = intel_crtc->pipe;
-	int p, n2, r2;
-	u32 temp, i;
+	int type = intel_encoder->type;
 
-	/* On Haswell, we need to enable the clocks and prepare DDI function to
-	 * work in HDMI mode for this pipe.
-	 */
-	DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe %c\n", port_name(port), pipe_name(pipe));
+	DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n",
+		      port_name(port), pipe_name(pipe));
+
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		intel_dp->DP = DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+		switch (intel_dp->lane_count) {
+		case 1:
+			intel_dp->DP |= DDI_PORT_WIDTH_X1;
+			break;
+		case 2:
+			intel_dp->DP |= DDI_PORT_WIDTH_X2;
+			break;
+		case 4:
+			intel_dp->DP |= DDI_PORT_WIDTH_X4;
+			break;
+		default:
+			intel_dp->DP |= DDI_PORT_WIDTH_X4;
+			WARN(1, "Unexpected DP lane count %d\n",
+			     intel_dp->lane_count);
+			break;
+		}
+
+		intel_dp_init_link_config(intel_dp);
+
+	} else if (type == INTEL_OUTPUT_HDMI) {
+		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+		if (intel_hdmi->has_audio) {
+			/* Proper support for digital audio needs a new logic
+			 * and a new set of registers, so we leave it for future
+			 * patch bombing.
+			 */
+			DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
+					 pipe_name(intel_crtc->pipe));
+
+			/* write eld */
+			DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
+			intel_write_eld(encoder, adjusted_mode);
+		}
+
+		intel_hdmi->set_infoframes(encoder, adjusted_mode);
+	}
+}
+
+static struct intel_encoder *
+intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *intel_encoder, *ret = NULL;
+	int num_encoders = 0;
+
+	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+		ret = intel_encoder;
+		num_encoders++;
+	}
+
+	if (num_encoders != 1)
+		WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders,
+		     intel_crtc->pipe);
+
+	BUG_ON(ret == NULL);
+	return ret;
+}
+
+void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint32_t val;
+
+	switch (intel_crtc->ddi_pll_sel) {
+	case PORT_CLK_SEL_SPLL:
+		plls->spll_refcount--;
+		if (plls->spll_refcount == 0) {
+			DRM_DEBUG_KMS("Disabling SPLL\n");
+			val = I915_READ(SPLL_CTL);
+			WARN_ON(!(val & SPLL_PLL_ENABLE));
+			I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
+			POSTING_READ(SPLL_CTL);
+		}
+		break;
+	case PORT_CLK_SEL_WRPLL1:
+		plls->wrpll1_refcount--;
+		if (plls->wrpll1_refcount == 0) {
+			DRM_DEBUG_KMS("Disabling WRPLL 1\n");
+			val = I915_READ(WRPLL_CTL1);
+			WARN_ON(!(val & WRPLL_PLL_ENABLE));
+			I915_WRITE(WRPLL_CTL1, val & ~WRPLL_PLL_ENABLE);
+			POSTING_READ(WRPLL_CTL1);
+		}
+		break;
+	case PORT_CLK_SEL_WRPLL2:
+		plls->wrpll2_refcount--;
+		if (plls->wrpll2_refcount == 0) {
+			DRM_DEBUG_KMS("Disabling WRPLL 2\n");
+			val = I915_READ(WRPLL_CTL2);
+			WARN_ON(!(val & WRPLL_PLL_ENABLE));
+			I915_WRITE(WRPLL_CTL2, val & ~WRPLL_PLL_ENABLE);
+			POSTING_READ(WRPLL_CTL2);
+		}
+		break;
+	}
+
+	WARN(plls->spll_refcount < 0, "Invalid SPLL refcount\n");
+	WARN(plls->wrpll1_refcount < 0, "Invalid WRPLL1 refcount\n");
+	WARN(plls->wrpll2_refcount < 0, "Invalid WRPLL2 refcount\n");
+
+	intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
+}
+
+static void intel_ddi_calculate_wrpll(int clock, int *p, int *n2, int *r2)
+{
+	u32 i;
 
 	for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++)
-		if (crtc->mode.clock <= wrpll_tmds_clock_table[i].clock)
+		if (clock <= wrpll_tmds_clock_table[i].clock)
 			break;
 
 	if (i == ARRAY_SIZE(wrpll_tmds_clock_table))
 		i--;
 
-	p = wrpll_tmds_clock_table[i].p;
-	n2 = wrpll_tmds_clock_table[i].n2;
-	r2 = wrpll_tmds_clock_table[i].r2;
+	*p = wrpll_tmds_clock_table[i].p;
+	*n2 = wrpll_tmds_clock_table[i].n2;
+	*r2 = wrpll_tmds_clock_table[i].r2;
 
-	if (wrpll_tmds_clock_table[i].clock != crtc->mode.clock)
-		DRM_INFO("WR PLL: using settings for %dKHz on %dKHz mode\n",
-			 wrpll_tmds_clock_table[i].clock, crtc->mode.clock);
+	if (wrpll_tmds_clock_table[i].clock != clock)
+		DRM_INFO("WRPLL: using settings for %dKHz on %dKHz mode\n",
+			 wrpll_tmds_clock_table[i].clock, clock);
 
-	DRM_DEBUG_KMS("WR PLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
-		      crtc->mode.clock, p, n2, r2);
+	DRM_DEBUG_KMS("WRPLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
+		      clock, *p, *n2, *r2);
+}
 
-	/* Enable LCPLL if disabled */
-	temp = I915_READ(LCPLL_CTL);
-	if (temp & LCPLL_PLL_DISABLE)
-		I915_WRITE(LCPLL_CTL,
-				temp & ~LCPLL_PLL_DISABLE);
+bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
+	int type = intel_encoder->type;
+	enum pipe pipe = intel_crtc->pipe;
+	uint32_t reg, val;
 
-	/* Configure WR PLL 1, program the correct divider values for
-	 * the desired frequency and wait for warmup */
-	I915_WRITE(WRPLL_CTL1,
-			WRPLL_PLL_ENABLE |
-			WRPLL_PLL_SELECT_LCPLL_2700 |
-			WRPLL_DIVIDER_REFERENCE(r2) |
-			WRPLL_DIVIDER_FEEDBACK(n2) |
-			WRPLL_DIVIDER_POST(p));
+	/* TODO: reuse PLLs when possible (compare values) */
 
-	udelay(20);
+	intel_ddi_put_crtc_pll(crtc);
 
-	/* Use WRPLL1 clock to drive the output to the port, and tell the pipe to use
-	 * this port for connection.
-	 */
-	I915_WRITE(PORT_CLK_SEL(port),
-			PORT_CLK_SEL_WRPLL1);
-	I915_WRITE(PIPE_CLK_SEL(pipe),
-			PIPE_CLK_SEL_PORT(port));
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		switch (intel_dp->link_bw) {
+		case DP_LINK_BW_1_62:
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
+			break;
+		case DP_LINK_BW_2_7:
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
+			break;
+		case DP_LINK_BW_5_4:
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
+			break;
+		default:
+			DRM_ERROR("Link bandwidth %d unsupported\n",
+				  intel_dp->link_bw);
+			return false;
+		}
+
+		/* We don't need to turn any PLL on because we'll use LCPLL. */
+		return true;
+
+	} else if (type == INTEL_OUTPUT_HDMI) {
+		int p, n2, r2;
+
+		if (plls->wrpll1_refcount == 0) {
+			DRM_DEBUG_KMS("Using WRPLL 1 on pipe %c\n",
+				      pipe_name(pipe));
+			plls->wrpll1_refcount++;
+			reg = WRPLL_CTL1;
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL1;
+		} else if (plls->wrpll2_refcount == 0) {
+			DRM_DEBUG_KMS("Using WRPLL 2 on pipe %c\n",
+				      pipe_name(pipe));
+			plls->wrpll2_refcount++;
+			reg = WRPLL_CTL2;
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL2;
+		} else {
+			DRM_ERROR("No WRPLLs available!\n");
+			return false;
+		}
+
+		WARN(I915_READ(reg) & WRPLL_PLL_ENABLE,
+		     "WRPLL already enabled\n");
 
+		intel_ddi_calculate_wrpll(clock, &p, &n2, &r2);
+
+		val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 |
+		      WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) |
+		      WRPLL_DIVIDER_POST(p);
+
+	} else if (type == INTEL_OUTPUT_ANALOG) {
+		if (plls->spll_refcount == 0) {
+			DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
+				      pipe_name(pipe));
+			plls->spll_refcount++;
+			reg = SPLL_CTL;
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
+		}
+
+		WARN(I915_READ(reg) & SPLL_PLL_ENABLE,
+		     "SPLL already enabled\n");
+
+		val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
+
+	} else {
+		WARN(1, "Invalid DDI encoder type %d\n", type);
+		return false;
+	}
+
+	I915_WRITE(reg, val);
 	udelay(20);
 
-	if (intel_hdmi->has_audio) {
-		/* Proper support for digital audio needs a new logic and a new set
-		 * of registers, so we leave it for future patch bombing.
-		 */
-		DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
-				 pipe_name(intel_crtc->pipe));
+	return true;
+}
+
+void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+	int type = intel_encoder->type;
+	uint32_t temp;
 
-		/* write eld */
-		DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
-		intel_write_eld(encoder, adjusted_mode);
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+
+		temp = TRANS_MSA_SYNC_CLK;
+		switch (intel_crtc->bpp) {
+		case 18:
+			temp |= TRANS_MSA_6_BPC;
+			break;
+		case 24:
+			temp |= TRANS_MSA_8_BPC;
+			break;
+		case 30:
+			temp |= TRANS_MSA_10_BPC;
+			break;
+		case 36:
+			temp |= TRANS_MSA_12_BPC;
+			break;
+		default:
+			temp |= TRANS_MSA_8_BPC;
+			WARN(1, "%d bpp unsupported by DDI function\n",
+			     intel_crtc->bpp);
+		}
+		I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
 	}
+}
 
-	/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
-	temp = PIPE_DDI_FUNC_ENABLE | PIPE_DDI_SELECT_PORT(port);
+void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	enum pipe pipe = intel_crtc->pipe;
+	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+	enum port port = intel_ddi_get_encoder_port(intel_encoder);
+	int type = intel_encoder->type;
+	uint32_t temp;
+
+	/* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
+	temp = TRANS_DDI_FUNC_ENABLE;
+	temp |= TRANS_DDI_SELECT_PORT(port);
 
 	switch (intel_crtc->bpp) {
 	case 18:
-		temp |= PIPE_DDI_BPC_6;
+		temp |= TRANS_DDI_BPC_6;
 		break;
 	case 24:
-		temp |= PIPE_DDI_BPC_8;
+		temp |= TRANS_DDI_BPC_8;
 		break;
 	case 30:
-		temp |= PIPE_DDI_BPC_10;
+		temp |= TRANS_DDI_BPC_10;
 		break;
 	case 36:
-		temp |= PIPE_DDI_BPC_12;
+		temp |= TRANS_DDI_BPC_12;
 		break;
 	default:
-		WARN(1, "%d bpp unsupported by pipe DDI function\n",
+		WARN(1, "%d bpp unsupported by transcoder DDI function\n",
 		     intel_crtc->bpp);
 	}
 
-	if (intel_hdmi->has_hdmi_sink)
-		temp |= PIPE_DDI_MODE_SELECT_HDMI;
+	if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+		temp |= TRANS_DDI_PVSYNC;
+	if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+		temp |= TRANS_DDI_PHSYNC;
+
+	if (cpu_transcoder == TRANSCODER_EDP) {
+		switch (pipe) {
+		case PIPE_A:
+			temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
+			break;
+		case PIPE_B:
+			temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
+			break;
+		case PIPE_C:
+			temp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
+			break;
+		default:
+			BUG();
+			break;
+		}
+	}
+
+	if (type == INTEL_OUTPUT_HDMI) {
+		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+		if (intel_hdmi->has_hdmi_sink)
+			temp |= TRANS_DDI_MODE_SELECT_HDMI;
+		else
+			temp |= TRANS_DDI_MODE_SELECT_DVI;
+
+	} else if (type == INTEL_OUTPUT_ANALOG) {
+		temp |= TRANS_DDI_MODE_SELECT_FDI;
+		temp |= (intel_crtc->fdi_lanes - 1) << 1;
+
+	} else if (type == INTEL_OUTPUT_DISPLAYPORT ||
+		   type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		temp |= TRANS_DDI_MODE_SELECT_DP_SST;
+
+		switch (intel_dp->lane_count) {
+		case 1:
+			temp |= TRANS_DDI_PORT_WIDTH_X1;
+			break;
+		case 2:
+			temp |= TRANS_DDI_PORT_WIDTH_X2;
+			break;
+		case 4:
+			temp |= TRANS_DDI_PORT_WIDTH_X4;
+			break;
+		default:
+			temp |= TRANS_DDI_PORT_WIDTH_X4;
+			WARN(1, "Unsupported lane count %d\n",
+			     intel_dp->lane_count);
+		}
+
+	} else {
+		WARN(1, "Invalid encoder type %d for pipe %d\n",
+		     intel_encoder->type, pipe);
+	}
+
+	I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
+}
+
+void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
+				       enum transcoder cpu_transcoder)
+{
+	uint32_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
+	uint32_t val = I915_READ(reg);
+
+	val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK);
+	val |= TRANS_DDI_PORT_NONE;
+	I915_WRITE(reg, val);
+}
+
+bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
+{
+	struct drm_device *dev = intel_connector->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *intel_encoder = intel_connector->encoder;
+	int type = intel_connector->base.connector_type;
+	enum port port = intel_ddi_get_encoder_port(intel_encoder);
+	enum pipe pipe = 0;
+	enum transcoder cpu_transcoder;
+	uint32_t tmp;
+
+	if (!intel_encoder->get_hw_state(intel_encoder, &pipe))
+		return false;
+
+	if (port == PORT_A)
+		cpu_transcoder = TRANSCODER_EDP;
 	else
-		temp |= PIPE_DDI_MODE_SELECT_DVI;
+		cpu_transcoder = pipe;
+
+	tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-		temp |= PIPE_DDI_PVSYNC;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-		temp |= PIPE_DDI_PHSYNC;
+	switch (tmp & TRANS_DDI_MODE_SELECT_MASK) {
+	case TRANS_DDI_MODE_SELECT_HDMI:
+	case TRANS_DDI_MODE_SELECT_DVI:
+		return (type == DRM_MODE_CONNECTOR_HDMIA);
+
+	case TRANS_DDI_MODE_SELECT_DP_SST:
+		if (type == DRM_MODE_CONNECTOR_eDP)
+			return true;
+	case TRANS_DDI_MODE_SELECT_DP_MST:
+		return (type == DRM_MODE_CONNECTOR_DisplayPort);
 
-	I915_WRITE(DDI_FUNC_CTL(pipe), temp);
+	case TRANS_DDI_MODE_SELECT_FDI:
+		return (type == DRM_MODE_CONNECTOR_VGA);
 
-	intel_hdmi->set_infoframes(encoder, adjusted_mode);
+	default:
+		return false;
+	}
 }
 
 bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
@@ -762,58 +1061,430 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 {
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
+	enum port port = intel_ddi_get_encoder_port(encoder);
 	u32 tmp;
 	int i;
 
-	tmp = I915_READ(DDI_BUF_CTL(intel_hdmi->ddi_port));
+	tmp = I915_READ(DDI_BUF_CTL(port));
 
 	if (!(tmp & DDI_BUF_CTL_ENABLE))
 		return false;
 
-	for_each_pipe(i) {
-		tmp = I915_READ(DDI_FUNC_CTL(i));
+	if (port == PORT_A) {
+		tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
 
-		if ((tmp & PIPE_DDI_PORT_MASK)
-		    == PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port)) {
-			*pipe = i;
-			return true;
+		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
+		case TRANS_DDI_EDP_INPUT_A_ON:
+		case TRANS_DDI_EDP_INPUT_A_ONOFF:
+			*pipe = PIPE_A;
+			break;
+		case TRANS_DDI_EDP_INPUT_B_ONOFF:
+			*pipe = PIPE_B;
+			break;
+		case TRANS_DDI_EDP_INPUT_C_ONOFF:
+			*pipe = PIPE_C;
+			break;
+		}
+
+		return true;
+	} else {
+		for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) {
+			tmp = I915_READ(TRANS_DDI_FUNC_CTL(i));
+
+			if ((tmp & TRANS_DDI_PORT_MASK)
+			    == TRANS_DDI_SELECT_PORT(port)) {
+				*pipe = i;
+				return true;
+			}
 		}
 	}
 
-	DRM_DEBUG_KMS("No pipe for ddi port %i found\n", intel_hdmi->ddi_port);
+	DRM_DEBUG_KMS("No pipe for ddi port %i found\n", port);
 
 	return true;
 }
 
-void intel_enable_ddi(struct intel_encoder *encoder)
+static uint32_t intel_ddi_get_crtc_pll(struct drm_i915_private *dev_priv,
+				       enum pipe pipe)
+{
+	uint32_t temp, ret;
+	enum port port;
+	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+								      pipe);
+	int i;
+
+	if (cpu_transcoder == TRANSCODER_EDP) {
+		port = PORT_A;
+	} else {
+		temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
+		temp &= TRANS_DDI_PORT_MASK;
+
+		for (i = PORT_B; i <= PORT_E; i++)
+			if (temp == TRANS_DDI_SELECT_PORT(i))
+				port = i;
+	}
+
+	ret = I915_READ(PORT_CLK_SEL(port));
+
+	DRM_DEBUG_KMS("Pipe %c connected to port %c using clock 0x%08x\n",
+		      pipe_name(pipe), port_name(port), ret);
+
+	return ret;
+}
+
+void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
 {
-	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
-	int port = intel_hdmi->ddi_port;
-	u32 temp;
+	enum pipe pipe;
+	struct intel_crtc *intel_crtc;
 
-	temp = I915_READ(DDI_BUF_CTL(port));
-	temp |= DDI_BUF_CTL_ENABLE;
+	for_each_pipe(pipe) {
+		intel_crtc =
+			to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
 
-	/* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width,
-	 * and swing/emphasis values are ignored so nothing special needs
-	 * to be done besides enabling the port.
-	 */
-	I915_WRITE(DDI_BUF_CTL(port), temp);
+		if (!intel_crtc->active)
+			continue;
+
+		intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
+								 pipe);
+
+		switch (intel_crtc->ddi_pll_sel) {
+		case PORT_CLK_SEL_SPLL:
+			dev_priv->ddi_plls.spll_refcount++;
+			break;
+		case PORT_CLK_SEL_WRPLL1:
+			dev_priv->ddi_plls.wrpll1_refcount++;
+			break;
+		case PORT_CLK_SEL_WRPLL2:
+			dev_priv->ddi_plls.wrpll2_refcount++;
+			break;
+		}
+	}
 }
 
-void intel_disable_ddi(struct intel_encoder *encoder)
+void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc)
+{
+	struct drm_crtc *crtc = &intel_crtc->base;
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+	enum port port = intel_ddi_get_encoder_port(intel_encoder);
+	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+
+	if (cpu_transcoder != TRANSCODER_EDP)
+		I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+			   TRANS_CLK_SEL_PORT(port));
+}
+
+void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc)
+{
+	struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
+	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+
+	if (cpu_transcoder != TRANSCODER_EDP)
+		I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+			   TRANS_CLK_SEL_DISABLED);
+}
+
+static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum port port = intel_ddi_get_encoder_port(intel_encoder);
+	int type = intel_encoder->type;
+
+	if (type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+		ironlake_edp_panel_vdd_on(intel_dp);
+		ironlake_edp_panel_on(intel_dp);
+		ironlake_edp_panel_vdd_off(intel_dp, true);
+	}
+
+	WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE);
+	I915_WRITE(PORT_CLK_SEL(port), intel_crtc->ddi_pll_sel);
+
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+		intel_dp_start_link_train(intel_dp);
+		intel_dp_complete_link_train(intel_dp);
+	}
+}
+
+static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
+				    enum port port)
+{
+	uint32_t reg = DDI_BUF_CTL(port);
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		udelay(1);
+		if (I915_READ(reg) & DDI_BUF_IS_IDLE)
+			return;
+	}
+	DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
+}
+
+static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	enum port port = intel_ddi_get_encoder_port(intel_encoder);
+	int type = intel_encoder->type;
+	uint32_t val;
+	bool wait = false;
+
+	val = I915_READ(DDI_BUF_CTL(port));
+	if (val & DDI_BUF_CTL_ENABLE) {
+		val &= ~DDI_BUF_CTL_ENABLE;
+		I915_WRITE(DDI_BUF_CTL(port), val);
+		wait = true;
+	}
+
+	val = I915_READ(DP_TP_CTL(port));
+	val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+	val |= DP_TP_CTL_LINK_TRAIN_PAT1;
+	I915_WRITE(DP_TP_CTL(port), val);
+
+	if (wait)
+		intel_wait_ddi_buf_idle(dev_priv, port);
+
+	if (type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+		ironlake_edp_panel_vdd_on(intel_dp);
+		ironlake_edp_panel_off(intel_dp);
+	}
+
+	I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
+}
+
+static void intel_enable_ddi(struct intel_encoder *intel_encoder)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum port port = intel_ddi_get_encoder_port(intel_encoder);
+	int type = intel_encoder->type;
+
+	if (type == INTEL_OUTPUT_HDMI) {
+		/* In HDMI/DVI mode, the port width, and swing/emphasis values
+		 * are ignored so nothing special needs to be done besides
+		 * enabling the port.
+		 */
+		I915_WRITE(DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE);
+	} else if (type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		ironlake_edp_backlight_on(intel_dp);
+	}
+}
+
+static void intel_disable_ddi(struct intel_encoder *intel_encoder)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	int type = intel_encoder->type;
+
+	if (type == INTEL_OUTPUT_EDP) {
+		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+		ironlake_edp_backlight_off(intel_dp);
+	}
+}
+
+int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
+{
+	if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT)
+		return 450;
+	else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) ==
+		 LCPLL_CLK_FREQ_450)
+		return 450;
+	else
+		return 540;
+}
+
+void intel_ddi_pll_init(struct drm_device *dev)
 {
-	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
-	int port = intel_hdmi->ddi_port;
-	u32 temp;
+	uint32_t val = I915_READ(LCPLL_CTL);
+
+	/* The LCPLL register should be turned on by the BIOS. For now let's
+	 * just check its state and print errors in case something is wrong.
+	 * Don't even try to turn it on.
+	 */
+
+	DRM_DEBUG_KMS("CDCLK running at %dMHz\n",
+		      intel_ddi_get_cdclk_freq(dev_priv));
+
+	if (val & LCPLL_CD_SOURCE_FCLK)
+		DRM_ERROR("CDCLK source is not LCPLL\n");
+
+	if (val & LCPLL_PLL_DISABLE)
+		DRM_ERROR("LCPLL is disabled\n");
+}
+
+void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder)
+{
+	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+	struct intel_dp *intel_dp = &intel_dig_port->dp;
+	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	enum port port = intel_dig_port->port;
+	bool wait;
+	uint32_t val;
+
+	if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) {
+		val = I915_READ(DDI_BUF_CTL(port));
+		if (val & DDI_BUF_CTL_ENABLE) {
+			val &= ~DDI_BUF_CTL_ENABLE;
+			I915_WRITE(DDI_BUF_CTL(port), val);
+			wait = true;
+		}
+
+		val = I915_READ(DP_TP_CTL(port));
+		val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+		val |= DP_TP_CTL_LINK_TRAIN_PAT1;
+		I915_WRITE(DP_TP_CTL(port), val);
+		POSTING_READ(DP_TP_CTL(port));
+
+		if (wait)
+			intel_wait_ddi_buf_idle(dev_priv, port);
+	}
+
+	val = DP_TP_CTL_ENABLE | DP_TP_CTL_MODE_SST |
+	      DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE;
+	if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+		val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE;
+	I915_WRITE(DP_TP_CTL(port), val);
+	POSTING_READ(DP_TP_CTL(port));
+
+	intel_dp->DP |= DDI_BUF_CTL_ENABLE;
+	I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP);
+	POSTING_READ(DDI_BUF_CTL(port));
+
+	udelay(600);
+}
+
+void intel_ddi_fdi_disable(struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+	uint32_t val;
+
+	intel_ddi_post_disable(intel_encoder);
+
+	val = I915_READ(_FDI_RXA_CTL);
+	val &= ~FDI_RX_ENABLE;
+	I915_WRITE(_FDI_RXA_CTL, val);
+
+	val = I915_READ(_FDI_RXA_MISC);
+	val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+	val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
+	I915_WRITE(_FDI_RXA_MISC, val);
+
+	val = I915_READ(_FDI_RXA_CTL);
+	val &= ~FDI_PCDCLK;
+	I915_WRITE(_FDI_RXA_CTL, val);
+
+	val = I915_READ(_FDI_RXA_CTL);
+	val &= ~FDI_RX_PLL_ENABLE;
+	I915_WRITE(_FDI_RXA_CTL, val);
+}
+
+static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
+	int type = intel_encoder->type;
+
+	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP)
+		intel_dp_check_link_status(intel_dp);
+}
+
+static void intel_ddi_destroy(struct drm_encoder *encoder)
+{
+	/* HDMI has nothing special to destroy, so we can go with this. */
+	intel_dp_encoder_destroy(encoder);
+}
+
+static bool intel_ddi_mode_fixup(struct drm_encoder *encoder,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	int type = intel_encoder->type;
+
+	WARN(type == INTEL_OUTPUT_UNKNOWN, "mode_fixup() on unknown output!\n");
+
+	if (type == INTEL_OUTPUT_HDMI)
+		return intel_hdmi_mode_fixup(encoder, mode, adjusted_mode);
+	else
+		return intel_dp_mode_fixup(encoder, mode, adjusted_mode);
+}
+
+static const struct drm_encoder_funcs intel_ddi_funcs = {
+	.destroy = intel_ddi_destroy,
+};
+
+static const struct drm_encoder_helper_funcs intel_ddi_helper_funcs = {
+	.mode_fixup = intel_ddi_mode_fixup,
+	.mode_set = intel_ddi_mode_set,
+	.disable = intel_encoder_noop,
+};
+
+void intel_ddi_init(struct drm_device *dev, enum port port)
+{
+	struct intel_digital_port *intel_dig_port;
+	struct intel_encoder *intel_encoder;
+	struct drm_encoder *encoder;
+	struct intel_connector *hdmi_connector = NULL;
+	struct intel_connector *dp_connector = NULL;
+
+	intel_dig_port = kzalloc(sizeof(struct intel_digital_port), GFP_KERNEL);
+	if (!intel_dig_port)
+		return;
+
+	dp_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!dp_connector) {
+		kfree(intel_dig_port);
+		return;
+	}
+
+	if (port != PORT_A) {
+		hdmi_connector = kzalloc(sizeof(struct intel_connector),
+					 GFP_KERNEL);
+		if (!hdmi_connector) {
+			kfree(dp_connector);
+			kfree(intel_dig_port);
+			return;
+		}
+	}
+
+	intel_encoder = &intel_dig_port->base;
+	encoder = &intel_encoder->base;
+
+	drm_encoder_init(dev, encoder, &intel_ddi_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(encoder, &intel_ddi_helper_funcs);
+
+	intel_encoder->enable = intel_enable_ddi;
+	intel_encoder->pre_enable = intel_ddi_pre_enable;
+	intel_encoder->disable = intel_disable_ddi;
+	intel_encoder->post_disable = intel_ddi_post_disable;
+	intel_encoder->get_hw_state = intel_ddi_get_hw_state;
+
+	intel_dig_port->port = port;
+	if (hdmi_connector)
+		intel_dig_port->hdmi.sdvox_reg = DDI_BUF_CTL(port);
+	else
+		intel_dig_port->hdmi.sdvox_reg = 0;
+	intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
 
-	temp = I915_READ(DDI_BUF_CTL(port));
-	temp &= ~DDI_BUF_CTL_ENABLE;
+	intel_encoder->type = INTEL_OUTPUT_UNKNOWN;
+	intel_encoder->crtc_mask =  (1 << 0) | (1 << 1) | (1 << 2);
+	intel_encoder->cloneable = false;
+	intel_encoder->hot_plug = intel_ddi_hot_plug;
 
-	I915_WRITE(DDI_BUF_CTL(port), temp);
+	if (hdmi_connector)
+		intel_hdmi_init_connector(intel_dig_port, hdmi_connector);
+	intel_dp_init_connector(intel_dig_port, dp_connector);
 }