diff options
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 7 | ||||
-rw-r--r-- | drivers/gpio/pca953x.c | 12 | ||||
-rw-r--r-- | drivers/gpio/twl4030-gpio.c | 54 |
3 files changed, 34 insertions, 39 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 48f49d93d249..3d2565441b36 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -95,7 +95,7 @@ config GPIO_MAX732X number for these GPIOs. config GPIO_PCA953X - tristate "PCA953x, PCA955x, and MAX7310 I/O ports" + tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports" depends on I2C help Say yes here to provide access to several register-oriented @@ -104,9 +104,10 @@ config GPIO_PCA953X 4 bits: pca9536, pca9537 - 8 bits: max7310, pca9534, pca9538, pca9554, pca9557 + 8 bits: max7310, pca9534, pca9538, pca9554, pca9557, + tca6408 - 16 bits: pca9535, pca9539, pca9555 + 16 bits: pca9535, pca9539, pca9555, tca6416 This driver can also be built as a module. If so, the module will be called pca953x. diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 9ceeb89f1325..37f35388a2ae 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -33,7 +33,12 @@ static const struct i2c_device_id pca953x_id[] = { { "pca9554", 8, }, { "pca9555", 16, }, { "pca9557", 8, }, + { "max7310", 8, }, + { "pca6107", 8, }, + { "tca6408", 8, }, + { "tca6416", 16, }, + /* NYET: { "tca6424", 24, }, */ { } }; MODULE_DEVICE_TABLE(i2c, pca953x_id); @@ -47,9 +52,6 @@ struct pca953x_chip { struct gpio_chip gpio_chip; }; -/* NOTE: we can't currently rely on fault codes to come from SMBus - * calls, so we map all errors to EIO here and return zero otherwise. - */ static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val) { int ret; @@ -61,7 +63,7 @@ static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val) if (ret < 0) { dev_err(&chip->client->dev, "failed writing register\n"); - return -EIO; + return ret; } return 0; @@ -78,7 +80,7 @@ static int pca953x_read_reg(struct pca953x_chip *chip, int reg, uint16_t *val) if (ret < 0) { dev_err(&chip->client->dev, "failed reading register\n"); - return -EIO; + return ret; } *val = (uint16_t)ret; diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index 37d3eec8730a..afad14792141 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -202,37 +202,6 @@ static int twl4030_get_gpio_datain(int gpio) return ret; } -/* - * Configure debounce timing value for a GPIO pin on TWL4030 - */ -int twl4030_set_gpio_debounce(int gpio, int enable) -{ - u8 d_bnk = gpio >> 3; - u8 d_msk = BIT(gpio & 0x7); - u8 reg = 0; - u8 base = 0; - int ret = 0; - - if (unlikely((gpio >= TWL4030_GPIO_MAX) - || !(gpio_usage_count & BIT(gpio)))) - return -EPERM; - - base = REG_GPIO_DEBEN1 + d_bnk; - mutex_lock(&gpio_lock); - ret = gpio_twl4030_read(base); - if (ret >= 0) { - if (enable) - reg = ret | d_msk; - else - reg = ret & ~d_msk; - - ret = gpio_twl4030_write(base, reg); - } - mutex_unlock(&gpio_lock); - return ret; -} -EXPORT_SYMBOL(twl4030_set_gpio_debounce); - /*----------------------------------------------------------------------*/ static int twl_request(struct gpio_chip *chip, unsigned offset) @@ -405,6 +374,23 @@ static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) REG_GPIOPUPDCTR1, 5); } +static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) +{ + u8 message[4]; + + /* 30 msec of debouncing is always used for MMC card detect, + * and is optional for everything else. + */ + message[1] = (debounce & 0xff) | (mmc_cd & 0x03); + debounce >>= 8; + message[2] = (debounce & 0xff); + debounce >>= 8; + message[3] = (debounce & 0x03); + + return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + REG_GPIO_DEBEN1, 3); +} + static int gpio_twl4030_remove(struct platform_device *pdev); static int __devinit gpio_twl4030_probe(struct platform_device *pdev) @@ -439,6 +425,12 @@ no_irqs: pdata->pullups, pdata->pulldowns, ret); + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, + ret); + twl_gpiochip.base = pdata->gpio_base; twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; |